Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 4578

Last change on this file since 4578 was 4573, checked in by oliver.maas, 4 years ago
pt_surface_heating_rate: calculate pt(0) incrementally by using dt_3d instead of calculating it absolutely by using time_since_reference_point, because time_since_reference_point is set to zero for initializing_actions = 'cyclic_fill', add statement for pt_surface_heating_rate in header.f90
Property svn:keywords set to `Id`
File size: 77.9 KB

Line
1	! !> @file header.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2020 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: header.f90 4573 2020-06-24 13:08:47Z gronemeier $
27	! added statement for pt_surface_heating_rate
28	!
29	! 4536 2020-05-17 17:24:13Z raasch
30	! output of restart data format added
31	!
32	! 4473 2020-03-25 21:04:07Z gronemeier
33	! revised message if wall_adjustment is used
34	!
35	! 4444 2020-03-05 15:59:50Z raasch
36	! bugfix: cpp-directives for serial mode added
37	!
38	! 4360 2020-01-07 11:25:50Z suehring
39	! Bugfix, character length too short, caused crash on NEC.
40	!
41	! 4309 2019-11-26 18:49:59Z suehring
42	! replaced recycling_yshift by y_shift
43	!
44	! 4301 2019-11-22 12:09:09Z oliver.maas
45	!
46	! 4297 2019-11-21 10:37:50Z oliver.maas
47	! Adjusted format for simulated time and related quantities
48	!
49	! 4297 2019-11-21 10:37:50Z oliver.maas
50	! adjusted message to the changed parameter recycling_yshift
51	!
52	! 4227 2019-09-10 18:04:34Z gronemeier
53	! implement new palm_date_time_mod
54	!
55	! 4223 2019-09-10 09:20:47Z gronemeier
56	! Write information about rotation angle
57	!
58	! 4182 2019-08-22 15:20:23Z scharf
59	! Corrected "Former revisions" section
60	!
61	! 4168 2019-08-16 13:50:17Z suehring
62	! Replace function get_topography_top_index by topo_top_ind
63	!
64	! 4069 2019-07-01 14:05:51Z Giersch
65	! Masked output running index mid has been introduced as a local variable to
66	! avoid runtime error (Loop variable has been modified) in time_integration
67	!
68	! 4023 2019-06-12 13:20:01Z maronga
69	! Renamed "coupling start time" to "spinup time"
70	!
71	! 4017 2019-06-06 12:16:46Z schwenkel
72	! unused variable removed
73	!
74	! 3655 2019-01-07 16:51:22Z knoop
75	! Implementation of the PALM module interface
76	!
77	! Revision 1.1 1997/08/11 06:17:20 raasch
78	! Initial revision
79	!
80	!
81	! Description:
82	! ------------
83	!> Writing a header with all important information about the current run.
84	!> This subroutine is called three times, two times at the beginning
85	!> (writing information on files RUN_CONTROL and HEADER) and one time at the
86	!> end of the run, then writing additional information about CPU-usage on file
87	!> header.
88	!-----------------------------------------------------------------------------!
89	SUBROUTINE header
90
91
92	USE arrays_3d, &
93	ONLY: pt_init, q_init, s_init, sa_init, ug, vg, w_subs, zu, zw
94
95	USE basic_constants_and_equations_mod, &
96	ONLY: g, kappa
97
98	USE bulk_cloud_model_mod, &
99	ONLY: bulk_cloud_model
100
101	USE control_parameters
102
103	USE cpulog, &
104	ONLY: log_point_s
105
106	USE grid_variables, &
107	ONLY: dx, dy
108
109	USE indices, &
110	ONLY: mg_loc_ind, nnx, nny, nnz, nx, ny, nxl_mg, nxr_mg, nyn_mg, &
111	nys_mg, nzt, nzt_mg, topo_top_ind
112
113	USE kinds
114
115	USE model_1d_mod, &
116	ONLY: damp_level_ind_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
117
118	USE module_interface, &
119	ONLY: module_interface_header
120
121	USE netcdf_interface, &
122	ONLY: netcdf_data_format, netcdf_data_format_string, netcdf_deflate
123
124	USE ocean_mod, &
125	ONLY: ibc_sa_t, prho_reference, sa_surface, &
126	sa_vertical_gradient, sa_vertical_gradient_level, &
127	sa_vertical_gradient_level_ind
128
129	USE palm_date_time_mod, &
130	ONLY: get_date_time
131
132	USE pegrid
133
134	#if defined( __parallel )
135	USE pmc_handle_communicator, &
136	ONLY: pmc_get_model_info
137
138	USE pmc_interface, &
139	ONLY: nested_run, nesting_datatransfer_mode, nesting_mode
140	#endif
141
142	USE surface_mod, &
143	ONLY: surf_def_h
144
145	USE turbulence_closure_mod, &
146	ONLY: rans_const_c, rans_const_sigma
147
148	IMPLICIT NONE
149
150
151	CHARACTER (LEN=2) :: do2d_mode !< mode of 2D data output (xy, xz, yz)
152
153	CHARACTER (LEN=5) :: section_chr !< string indicating grid information where to output 2D slices
154
155	CHARACTER (LEN=10) :: host_chr !< string for hostname
156
157	CHARACTER (LEN=16) :: begin_chr !< string indication start time for the data output
158	CHARACTER (LEN=16) :: coor_chr !< dummy string
159
160	CHARACTER (LEN=26) :: ver_rev !< string for run identification
161
162	#if defined( __parallel )
163	CHARACTER (LEN=32) :: cpl_name !< name of child domain (nesting mode only)
164	#endif
165
166	CHARACTER (LEN=40) :: output_format !< netcdf format
167
168	CHARACTER (LEN=70) :: char1 !< dummy varialbe used for various strings
169	CHARACTER (LEN=70) :: char2 !< string containing informating about the advected distance in case of Galilei transformation
170	CHARACTER (LEN=23) :: date_time_str !< string for date and time information
171	CHARACTER (LEN=70) :: dopr_chr !< string indicating profile output variables
172	CHARACTER (LEN=70) :: do2d_xy !< string indicating 2D-xy output variables
173	CHARACTER (LEN=70) :: do2d_xz !< string indicating 2D-xz output variables
174	CHARACTER (LEN=70) :: do2d_yz !< string indicating 2D-yz output variables
175	CHARACTER (LEN=70) :: do3d_chr !< string indicating 3D output variables
176	CHARACTER (LEN=70) :: domask_chr !< string indicating masked output variables
177	CHARACTER (LEN=70) :: run_classification !< string classifying type of run, e.g. nested, coupled, etc.
178
179	CHARACTER (LEN=85) :: r_upper !< string indicating model top boundary condition for various quantities
180	CHARACTER (LEN=85) :: r_lower !< string indicating bottom boundary condition for various quantities
181
182	CHARACTER (LEN=86) :: coordinates !< string indicating height coordinates for profile-prescribed variables
183	CHARACTER (LEN=86) :: gradients !< string indicating gradients of profile-prescribed variables between the prescribed height coordinates
184	CHARACTER (LEN=86) :: slices !< string indicating grid coordinates of profile-prescribed subsidence velocity
185	CHARACTER (LEN=86) :: temperatures !< string indicating profile-prescribed subsidence velocities
186	CHARACTER (LEN=86) :: ugcomponent !< string indicating profile-prescribed geostrophic u-component
187	CHARACTER (LEN=86) :: vgcomponent !< string indicating profile-prescribed geostrophic v-component
188
189	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /) !< string indicating masking steps along certain direction
190
191	INTEGER(iwp) :: av !< index indicating average output quantities
192	INTEGER(iwp) :: bh !< building height in generic single-building setup
193	INTEGER(iwp) :: blx !< building width in grid points along x in generic single-building setup
194	INTEGER(iwp) :: bly !< building width in grid points along y in generic single-building setup
195	INTEGER(iwp) :: bxl !< index for left building wall in generic single-building setup
196	INTEGER(iwp) :: bxr !< index for right building wall in generic single-building setup
197	INTEGER(iwp) :: byn !< index for north building wall in generic single-building setup
198	INTEGER(iwp) :: bys !< index for south building wall in generic single-building setup
199	INTEGER(iwp) :: ch !< canyon depth in generic street-canyon setup
200	INTEGER(iwp) :: count !< number of masked output locations
201	INTEGER(iwp) :: cwx !< canyon width along x in generic street-canyon setup
202	INTEGER(iwp) :: cwy !< canyon width along y in generic street-canyon setup
203	INTEGER(iwp) :: cxl !< index for left canyon wall in generic street-canyon setup
204	INTEGER(iwp) :: cxr !< index for right canyon wall in generic street-canyon setup
205	INTEGER(iwp) :: cyn !< index for north canyon wall in generic street-canyon setup
206	INTEGER(iwp) :: cys !< index for south canyon wall in generic street-canyon setup
207	INTEGER(iwp) :: dim !< running index for masking output locations
208	INTEGER(iwp) :: i !< running index for various loops
209	INTEGER(iwp) :: io !< file unit of HEADER file
210	INTEGER(iwp) :: l !< substring length
211	INTEGER(iwp) :: ll !< substring length
212	INTEGER(iwp) :: mid !< masked output running index
213	#if defined( __parallel )
214	INTEGER(iwp) :: cpl_parent_id !< parent ID for the respective child model
215	INTEGER(iwp) :: my_cpl_id !< run id in a nested model setup
216	INTEGER(iwp) :: n !< running index over number of couplers in a nested model setup
217	INTEGER(iwp) :: ncpl !< number of coupler in a nested model setup
218	INTEGER(iwp) :: npe_total !< number of total PEs in a coupler (parent + child)
219	#endif
220
221
222	REAL(wp) :: cpuseconds_per_simulated_second !< CPU time (in s) per simulated second
223	#if defined( __parallel )
224	REAL(wp) :: lower_left_coord_x !< x-coordinate of nest domain
225	REAL(wp) :: lower_left_coord_y !< y-coordinate of nest domain
226	#endif
227
228	!
229	!-- Open the output file. At the end of the simulation, output is directed
230	!-- to unit 19.
231	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
232	.NOT. simulated_time_at_begin /= simulated_time ) THEN
233	io = 15 ! header output on file RUN_CONTROL
234	ELSE
235	io = 19 ! header output on file HEADER
236	ENDIF
237	CALL check_open( io )
238
239	!
240	!-- At the end of the run, output file (HEADER) will be rewritten with
241	!-- new information
242	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
243
244	!
245	!-- Determine kind of model run
246	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
247	run_classification = 'restart run'
248	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
249	run_classification = 'run with cyclic fill of 3D - prerun data'
250	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
251	run_classification = 'run without 1D - prerun'
252	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
253	run_classification = 'run with 1D - prerun'
254	ELSEIF ( INDEX( initializing_actions, 'inifor' ) /= 0 ) THEN
255	run_classification = 'run initialized with COSMO data'
256	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
257	run_classification = 'run initialized by user'
258	ELSEIF ( INDEX( initializing_actions, 'initialize_vortex' ) /=0 ) THEN
259	run_classification = 'run additionally initialized by a Rankine-vortex'
260	ELSEIF ( INDEX( initializing_actions, 'initialize_ptanom' ) /=0 ) THEN
261	run_classification = 'run additionally initialized by temperature anomaly'
262	ELSE
263	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
264	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
265	ENDIF
266	#if defined( __parallel )
267	IF ( nested_run ) run_classification = 'nested ' // run_classification(1:63)
268	#endif
269	IF ( ocean_mode ) THEN
270	run_classification = 'ocean - ' // run_classification(1:61)
271	ELSE
272	run_classification = 'atmosphere - ' // run_classification(1:57)
273	ENDIF
274
275	!
276	!-- Run-identification, date, time, host
277	host_chr = host(1:10)
278	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
279	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
280	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
281	WRITE ( io, 101 ) coupling_mode
282	ENDIF
283	#if defined( __parallel )
284	IF ( coupling_start_time /= 0.0_wp .AND. .NOT. spinup ) THEN
285	IF ( coupling_start_time > simulated_time_at_begin ) THEN
286	WRITE ( io, 109 )
287	ELSE
288	WRITE ( io, 114 )
289	ENDIF
290	ENDIF
291	#endif
292	IF ( ensemble_member_nr /= 0 ) THEN
293	WRITE ( io, 512 ) run_date, run_identifier, run_time, runnr, &
294	ADJUSTR( host_chr ), ensemble_member_nr
295	ELSE
296	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
297	ADJUSTR( host_chr )
298	ENDIF
299	#if defined( __parallel )
300	IF ( npex == -1 .AND. npey == -1 ) THEN
301	char1 = 'calculated'
302	ELSE
303	char1 = 'predefined'
304	ENDIF
305	IF ( threads_per_task == 1 ) THEN
306	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
307	ELSE
308	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
309	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
310	ENDIF
311
312	IF ( pdims(2) == 1 ) THEN
313	WRITE ( io, 107 ) 'x'
314	ELSEIF ( pdims(1) == 1 ) THEN
315	WRITE ( io, 107 ) 'y'
316	ENDIF
317	IF ( numprocs /= maximum_parallel_io_streams ) THEN
318	WRITE ( io, 108 ) maximum_parallel_io_streams
319	ENDIF
320	#endif
321
322	#if defined( __parallel )
323	!
324	!-- Nesting informations
325	IF ( nested_run ) THEN
326
327	WRITE ( io, 600 ) TRIM( nesting_mode ), &
328	TRIM( nesting_datatransfer_mode )
329	CALL pmc_get_model_info( ncpl = ncpl, cpl_id = my_cpl_id )
330
331	DO n = 1, ncpl
332	CALL pmc_get_model_info( request_for_cpl_id = n, cpl_name = cpl_name,&
333	cpl_parent_id = cpl_parent_id, &
334	lower_left_x = lower_left_coord_x, &
335	lower_left_y = lower_left_coord_y, &
336	npe_total = npe_total )
337	IF ( n == my_cpl_id ) THEN
338	char1 = '*'
339	ELSE
340	char1 = ' '
341	ENDIF
342	WRITE ( io, 601 ) TRIM( char1 ), n, cpl_parent_id, npe_total, &
343	lower_left_coord_x, lower_left_coord_y, &
344	TRIM( cpl_name )
345	ENDDO
346
347	ENDIF
348	#endif
349
350	WRITE ( io, 99 )
351
352	!
353	!-- Numerical schemes
354	WRITE ( io, 110 )
355	IF ( rans_mode ) THEN
356	WRITE ( io, 124 ) TRIM( turbulence_closure ), 'RANS'
357	ELSE
358	WRITE ( io, 124 ) TRIM( turbulence_closure ), 'LES'
359	ENDIF
360	WRITE ( io, 121 ) TRIM( approximation )
361	IF ( psolver(1:7) == 'poisfft' ) THEN
362	WRITE ( io, 111 ) TRIM( fft_method )
363	IF ( transpose_compute_overlap ) WRITE( io, 115 )
364	ELSEIF ( psolver == 'sor' ) THEN
365	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
366	ELSEIF ( psolver(1:9) == 'multigrid' ) THEN
367	WRITE ( io, 135 ) TRIM(psolver), cycle_mg, maximum_grid_level, ngsrb
368	IF ( mg_cycles == -1 ) THEN
369	WRITE ( io, 140 ) residual_limit
370	ELSE
371	WRITE ( io, 141 ) mg_cycles
372	ENDIF
373	IF ( mg_switch_to_pe0_level == 0 ) THEN
374	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
375	nzt_mg(1)
376	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
377	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
378	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
379	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
380	nzt_mg(mg_switch_to_pe0_level), &
381	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
382	nzt_mg(1)
383	ENDIF
384	IF ( psolver == 'multigrid_noopt' .AND. masking_method ) WRITE ( io, 144 )
385	ENDIF
386	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
387	THEN
388	WRITE ( io, 142 )
389	ENDIF
390
391	IF ( momentum_advec == 'pw-scheme' ) THEN
392	WRITE ( io, 113 )
393	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
394	WRITE ( io, 503 )
395	ENDIF
396	IF ( scalar_advec == 'pw-scheme' ) THEN
397	WRITE ( io, 116 )
398	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
399	WRITE ( io, 504 )
400	ELSE
401	WRITE ( io, 118 )
402	ENDIF
403
404	WRITE ( io, 139 ) TRIM( loop_optimization )
405
406	IF ( galilei_transformation ) THEN
407	IF ( use_ug_for_galilei_tr ) THEN
408	char1 = '0.6 * geostrophic wind'
409	ELSE
410	char1 = 'mean wind in model domain'
411	ENDIF
412	IF ( simulated_time_at_begin == simulated_time ) THEN
413	char2 = 'at the start of the run'
414	ELSE
415	char2 = 'at the end of the run'
416	ENDIF
417	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
418	advected_distance_x/1000.0_wp, &
419	advected_distance_y/1000.0_wp
420	ENDIF
421	WRITE ( io, 122 ) timestep_scheme
422	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
423	IF ( rayleigh_damping_factor /= 0.0_wp ) THEN
424	IF ( .NOT. ocean_mode ) THEN
425	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
426	rayleigh_damping_factor
427	ELSE
428	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
429	rayleigh_damping_factor
430	ENDIF
431	ENDIF
432	IF ( neutral ) WRITE ( io, 131 ) pt_surface
433	IF ( humidity ) THEN
434	IF ( .NOT. bulk_cloud_model ) THEN
435	WRITE ( io, 129 )
436	ELSE
437	WRITE ( io, 130 )
438	ENDIF
439	ENDIF
440	IF ( passive_scalar ) WRITE ( io, 134 )
441	IF ( conserve_volume_flow ) THEN
442	WRITE ( io, 150 ) conserve_volume_flow_mode
443	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
444	WRITE ( io, 151 ) u_bulk, v_bulk
445	ENDIF
446	ELSEIF ( dp_external ) THEN
447	IF ( dp_smooth ) THEN
448	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
449	ELSE
450	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
451	ENDIF
452	ENDIF
453	WRITE ( io, 99 )
454
455	!
456	!-- Runtime and timestep information
457	WRITE ( io, 200 )
458	IF ( .NOT. dt_fixed ) THEN
459	WRITE ( io, 201 ) dt_max, cfl_factor
460	ELSE
461	WRITE ( io, 202 ) dt
462	ENDIF
463	WRITE ( io, 203 ) simulated_time_at_begin, end_time
464
465	IF ( time_restart /= 9999999.9_wp .AND. &
466	simulated_time_at_begin == simulated_time ) THEN
467	IF ( dt_restart == 9999999.9_wp ) THEN
468	WRITE ( io, 204 ) ' Restart at: ',time_restart
469	ELSE
470	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
471	ENDIF
472	ENDIF
473
474	IF ( simulated_time_at_begin /= simulated_time ) THEN
475	i = MAX ( log_point_s(10)%counts, 1 )
476	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0_wp ) THEN
477	cpuseconds_per_simulated_second = 0.0_wp
478	ELSE
479	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
480	( simulated_time - &
481	simulated_time_at_begin )
482	ENDIF
483	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
484	log_point_s(10)%sum / REAL( i, KIND=wp ), &
485	cpuseconds_per_simulated_second
486	IF ( time_restart /= 9999999.9_wp .AND. time_restart < end_time ) THEN
487	IF ( dt_restart == 9999999.9_wp ) THEN
488	WRITE ( io, 204 ) ' Next restart at: ',time_restart
489	ELSE
490	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
491	ENDIF
492	ENDIF
493	ENDIF
494
495
496	!
497	!-- Start time for coupled runs, if independent precursor runs for atmosphere
498	!-- and ocean are used or have been used. In this case, coupling_start_time
499	!-- defines the time when the coupling is switched on.
500	IF ( coupling_start_time /= 0.0_wp ) THEN
501	WRITE ( io, 207 ) coupling_start_time
502	ENDIF
503
504	!
505	!-- Computational grid
506	IF ( .NOT. ocean_mode ) THEN
507	WRITE ( io, 250 ) dx, dy
508
509	DO i = 1, number_stretch_level_start+1
510	WRITE ( io, 253 ) i, dz(i)
511	ENDDO
512
513	WRITE( io, 251 ) (nx+1)dx, (ny+1)dy, zu(nzt+1)
514
515	IF ( ANY( dz_stretch_level_start_index < nzt+1 ) ) THEN
516	WRITE( io, '(A)', advance='no') ' Vertical stretching starts at height:'
517	DO i = 1, number_stretch_level_start
518	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_start(i), ' m,'
519	ENDDO
520	WRITE( io, '(/,A)', advance='no') ' Vertical stretching starts at index: '
521	DO i = 1, number_stretch_level_start
522	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_start_index(i), ','
523	ENDDO
524	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at height: '
525	DO i = 1, number_stretch_level_start
526	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_end(i), ' m,'
527	ENDDO
528	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at index: '
529	DO i = 1, number_stretch_level_start
530	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_end_index(i), ','
531	ENDDO
532	WRITE( io, '(/,A)', advance='no') ' Factor used for stretching: '
533	DO i = 1, number_stretch_level_start
534	WRITE ( io, '(F12.3,A1)', advance='no' ) dz_stretch_factor_array(i), ','
535	ENDDO
536	ENDIF
537
538	ELSE
539	WRITE ( io, 250 ) dx, dy
540	DO i = 1, number_stretch_level_start+1
541	WRITE ( io, 253 ) i, dz(i)
542	ENDDO
543
544	WRITE ( io, 251 ) (nx+1)dx, (ny+1)dy, zu(0)
545
546	IF ( ANY( dz_stretch_level_start_index > 0 ) ) THEN
547	WRITE( io, '(A)', advance='no') ' Vertical stretching starts at height:'
548	DO i = 1, number_stretch_level_start
549	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_start(i), ' m,'
550	ENDDO
551	WRITE( io, '(/,A)', advance='no') ' Vertical stretching starts at index: '
552	DO i = 1, number_stretch_level_start
553	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_start_index(i), ','
554	ENDDO
555	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at height: '
556	DO i = 1, number_stretch_level_start
557	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_end(i), ' m,'
558	ENDDO
559	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at index: '
560	DO i = 1, number_stretch_level_start
561	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_end_index(i), ','
562	ENDDO
563	WRITE( io, '(/,A)', advance='no') ' Factor used for stretching: '
564	DO i = 1, number_stretch_level_start
565	WRITE ( io, '(F12.3,A1)', advance='no' ) dz_stretch_factor_array(i), ','
566	ENDDO
567	ENDIF
568	ENDIF
569	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
570	MIN( nnz+2, nzt+2 )
571	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
572
573	!
574	!-- Profile for the large scale vertial velocity
575	!-- Building output strings, starting with surface value
576	IF ( large_scale_subsidence ) THEN
577	temperatures = ' 0.0'
578	gradients = '------'
579	slices = ' 0'
580	coordinates = ' 0.0'
581	i = 1
582	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
583
584	WRITE (coor_chr,'(E10.2,7X)') &
585	w_subs(subs_vertical_gradient_level_i(i))
586	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
587
588	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
589	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
590
591	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
592	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
593
594	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
595	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
596
597	IF ( i == 10 ) THEN
598	EXIT
599	ELSE
600	i = i + 1
601	ENDIF
602
603	ENDDO
604
605
606	IF ( .NOT. large_scale_forcing ) THEN
607	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
608	TRIM( gradients ), TRIM( slices )
609	ENDIF
610
611
612	ENDIF
613
614	!-- Profile of the geostrophic wind (component ug)
615	!-- Building output strings
616	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
617	gradients = '------'
618	slices = ' 0'
619	coordinates = ' 0.0'
620	i = 1
621	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
622
623	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
624	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
625
626	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
627	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
628
629	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
630	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
631
632	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
633	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
634
635	IF ( i == 10 ) THEN
636	EXIT
637	ELSE
638	i = i + 1
639	ENDIF
640
641	ENDDO
642
643	IF ( .NOT. large_scale_forcing ) THEN
644	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
645	TRIM( gradients ), TRIM( slices )
646	ENDIF
647
648	!-- Profile of the geostrophic wind (component vg)
649	!-- Building output strings
650	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
651	gradients = '------'
652	slices = ' 0'
653	coordinates = ' 0.0'
654	i = 1
655	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
656
657	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
658	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
659
660	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
661	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
662
663	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
664	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
665
666	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
667	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
668
669	IF ( i == 10 ) THEN
670	EXIT
671	ELSE
672	i = i + 1
673	ENDIF
674
675	ENDDO
676
677	IF ( .NOT. large_scale_forcing ) THEN
678	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
679	TRIM( gradients ), TRIM( slices )
680	ENDIF
681
682	!
683	!-- Topography
684	WRITE ( io, 270 ) topography
685	SELECT CASE ( TRIM( topography ) )
686
687	CASE ( 'flat' )
688	! no actions necessary
689
690	CASE ( 'single_building' )
691	blx = INT( building_length_x / dx )
692	bly = INT( building_length_y / dy )
693	bh = MINLOC( ABS( zw - building_height ), 1 ) - 1
694	IF ( ABS( zw(bh ) - building_height ) == &
695	ABS( zw(bh+1) - building_height ) ) bh = bh + 1
696
697	IF ( building_wall_left == 9999999.9_wp ) THEN
698	building_wall_left = ( nx + 1 - blx ) / 2 * dx
699	ENDIF
700	bxl = INT ( building_wall_left / dx + 0.5_wp )
701	bxr = bxl + blx
702
703	IF ( building_wall_south == 9999999.9_wp ) THEN
704	building_wall_south = ( ny + 1 - bly ) / 2 * dy
705	ENDIF
706	bys = INT ( building_wall_south / dy + 0.5_wp )
707	byn = bys + bly
708
709	WRITE ( io, 271 ) building_length_x, building_length_y, &
710	building_height, bxl, bxr, bys, byn
711
712	CASE ( 'single_street_canyon' )
713	ch = MINLOC( ABS( zw - canyon_height ), 1 ) - 1
714	IF ( ABS( zw(ch ) - canyon_height ) == &
715	ABS( zw(ch+1) - canyon_height ) ) ch = ch + 1
716	IF ( canyon_width_x /= 9999999.9_wp ) THEN
717	!
718	!-- Street canyon in y direction
719	cwx = NINT( canyon_width_x / dx )
720	IF ( canyon_wall_left == 9999999.9_wp ) THEN
721	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
722	ENDIF
723	cxl = NINT( canyon_wall_left / dx )
724	cxr = cxl + cwx
725	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
726
727	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
728	!
729	!-- Street canyon in x direction
730	cwy = NINT( canyon_width_y / dy )
731	IF ( canyon_wall_south == 9999999.9_wp ) THEN
732	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
733	ENDIF
734	cys = NINT( canyon_wall_south / dy )
735	cyn = cys + cwy
736	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
737	ENDIF
738
739	CASE ( 'tunnel' )
740	IF ( tunnel_width_x /= 9999999.9_wp ) THEN
741	!
742	!-- Tunnel axis in y direction
743	IF ( tunnel_length == 9999999.9_wp .OR. &
744	tunnel_length >= ( nx + 1 ) * dx ) THEN
745	WRITE ( io, 273 ) 'y', tunnel_height, tunnel_wall_depth, &
746	tunnel_width_x
747	ELSE
748	WRITE ( io, 274 ) 'y', tunnel_height, tunnel_wall_depth, &
749	tunnel_width_x, tunnel_length
750	ENDIF
751
752	ELSEIF ( tunnel_width_y /= 9999999.9_wp ) THEN
753	!
754	!-- Tunnel axis in x direction
755	IF ( tunnel_length == 9999999.9_wp .OR. &
756	tunnel_length >= ( ny + 1 ) * dy ) THEN
757	WRITE ( io, 273 ) 'x', tunnel_height, tunnel_wall_depth, &
758	tunnel_width_y
759	ELSE
760	WRITE ( io, 274 ) 'x', tunnel_height, tunnel_wall_depth, &
761	tunnel_width_y, tunnel_length
762	ENDIF
763	ENDIF
764
765	END SELECT
766
767	IF ( TRIM( topography ) /= 'flat' ) THEN
768	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
769	IF ( TRIM( topography ) == 'single_building' .OR. &
770	TRIM( topography ) == 'single_street_canyon' ) THEN
771	WRITE ( io, 278 )
772	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
773	WRITE ( io, 279 )
774	ENDIF
775	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
776	WRITE ( io, 278 )
777	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
778	WRITE ( io, 279 )
779	ENDIF
780	ENDIF
781
782	!-- Complex terrain
783	IF ( complex_terrain ) THEN
784	WRITE( io, 280 )
785	IF ( turbulent_inflow ) THEN
786	WRITE( io, 281 ) zu(topo_top_ind(0,0,0))
787	ENDIF
788	IF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
789	WRITE( io, 282 )
790	ENDIF
791	ENDIF
792	!
793	!-- Boundary conditions
794	IF ( ibc_p_b == 0 ) THEN
795	r_lower = 'p(0) = 0 \|'
796	ELSEIF ( ibc_p_b == 1 ) THEN
797	r_lower = 'p(0) = p(1) \|'
798	ENDIF
799	IF ( ibc_p_t == 0 ) THEN
800	r_upper = 'p(nzt+1) = 0 \|'
801	ELSE
802	r_upper = 'p(nzt+1) = p(nzt) \|'
803	ENDIF
804
805	IF ( ibc_uv_b == 0 ) THEN
806	r_lower = TRIM( r_lower ) // ' uv(0) = -uv(1) \|'
807	ELSE
808	r_lower = TRIM( r_lower ) // ' uv(0) = uv(1) \|'
809	ENDIF
810	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
811	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = 0 \|'
812	ELSEIF ( ibc_uv_t == 0 ) THEN
813	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
814	ELSE
815	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = uv(nzt) \|'
816	ENDIF
817
818	IF ( ibc_pt_b == 0 ) THEN
819	IF ( land_surface ) THEN
820	r_lower = TRIM( r_lower ) // ' pt(0) = from soil model'
821	ELSE
822	r_lower = TRIM( r_lower ) // ' pt(0) = pt_surface'
823	ENDIF
824	ELSEIF ( ibc_pt_b == 1 ) THEN
825	r_lower = TRIM( r_lower ) // ' pt(0) = pt(1)'
826	ELSEIF ( ibc_pt_b == 2 ) THEN
827	r_lower = TRIM( r_lower ) // ' pt(0) = from coupled model'
828	ENDIF
829	IF ( ibc_pt_t == 0 ) THEN
830	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt_top'
831	ELSEIF( ibc_pt_t == 1 ) THEN
832	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt(nzt)'
833	ELSEIF( ibc_pt_t == 2 ) THEN
834	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
835
836	ENDIF
837
838	WRITE ( io, 300 ) r_lower, r_upper
839
840	IF ( .NOT. constant_diffusion ) THEN
841	IF ( ibc_e_b == 1 ) THEN
842	r_lower = 'e(0) = e(1)'
843	ELSE
844	r_lower = 'e(0) = e(1) = (u/0.1)*2'
845	ENDIF
846	r_upper = 'e(nzt+1) = e(nzt) = e(nzt-1)'
847
848	WRITE ( io, 301 ) 'e', r_lower, r_upper
849
850	ENDIF
851
852	IF ( ocean_mode ) THEN
853	r_lower = 'sa(0) = sa(1)'
854	IF ( ibc_sa_t == 0 ) THEN
855	r_upper = 'sa(nzt+1) = sa_surface'
856	ELSE
857	r_upper = 'sa(nzt+1) = sa(nzt)'
858	ENDIF
859	WRITE ( io, 301 ) 'sa', r_lower, r_upper
860	ENDIF
861
862	IF ( humidity ) THEN
863	IF ( ibc_q_b == 0 ) THEN
864	IF ( land_surface ) THEN
865	r_lower = 'q(0) = from soil model'
866	ELSE
867	r_lower = 'q(0) = q_surface'
868	ENDIF
869
870	ELSE
871	r_lower = 'q(0) = q(1)'
872	ENDIF
873	IF ( ibc_q_t == 0 ) THEN
874	r_upper = 'q(nzt+1) = q_top'
875	ELSE
876	r_upper = 'q(nzt+1) = q(nzt) + dq/dz'
877	ENDIF
878	WRITE ( io, 301 ) 'q', r_lower, r_upper
879	ENDIF
880
881	IF ( passive_scalar ) THEN
882	IF ( ibc_s_b == 0 ) THEN
883	r_lower = 's(0) = s_surface'
884	ELSE
885	r_lower = 's(0) = s(1)'
886	ENDIF
887	IF ( ibc_s_t == 0 ) THEN
888	r_upper = 's(nzt+1) = s_top'
889	ELSEIF ( ibc_s_t == 1 ) THEN
890	r_upper = 's(nzt+1) = s(nzt)'
891	ELSEIF ( ibc_s_t == 2 ) THEN
892	r_upper = 's(nzt+1) = s(nzt) + ds/dz'
893	ENDIF
894	WRITE ( io, 301 ) 's', r_lower, r_upper
895	ENDIF
896
897	IF ( use_surface_fluxes ) THEN
898	WRITE ( io, 303 )
899	IF ( constant_heatflux ) THEN
900	IF ( large_scale_forcing .AND. lsf_surf ) THEN
901	IF ( surf_def_h(0)%ns >= 1 ) WRITE ( io, 306 ) surf_def_h(0)%shf(1)
902	ELSE
903	WRITE ( io, 306 ) surface_heatflux
904	ENDIF
905	IF ( random_heatflux ) WRITE ( io, 307 )
906	ENDIF
907	IF ( humidity .AND. constant_waterflux ) THEN
908	IF ( large_scale_forcing .AND. lsf_surf ) THEN
909	WRITE ( io, 311 ) surf_def_h(0)%qsws(1)
910	ELSE
911	WRITE ( io, 311 ) surface_waterflux
912	ENDIF
913	ENDIF
914	IF ( passive_scalar .AND. constant_scalarflux ) THEN
915	WRITE ( io, 313 ) surface_scalarflux
916	ENDIF
917	ENDIF
918
919	IF ( use_top_fluxes ) THEN
920	WRITE ( io, 304 )
921	IF ( coupling_mode == 'uncoupled' ) THEN
922	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
923	IF ( constant_top_heatflux ) THEN
924	WRITE ( io, 306 ) top_heatflux
925	ENDIF
926	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
927	WRITE ( io, 316 )
928	ENDIF
929	IF ( ocean_mode .AND. constant_top_salinityflux ) &
930	WRITE ( io, 309 ) top_salinityflux
931	IF ( humidity ) WRITE ( io, 315 )
932	IF ( passive_scalar .AND. constant_top_scalarflux ) &
933	WRITE ( io, 302 ) top_scalarflux
934	ENDIF
935
936	IF ( constant_flux_layer ) THEN
937	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
938	z0h_factor*roughness_length, kappa, &
939	zeta_min, zeta_max
940	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
941	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
942	WRITE ( io, 312 )
943	ENDIF
944	IF ( passive_scalar .AND. .NOT. constant_scalarflux ) THEN
945	WRITE ( io, 314 )
946	ENDIF
947	ELSE
948	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
949	WRITE ( io, 310 ) zeta_min, zeta_max
950	ENDIF
951	ENDIF
952
953	WRITE ( io, 317 ) bc_lr, bc_ns
954	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
955	WRITE ( io, 318 ) use_cmax, pt_damping_width, pt_damping_factor
956	IF ( turbulent_inflow ) THEN
957	IF ( y_shift == 0 ) THEN
958	WRITE ( io, 319 ) recycling_width, recycling_plane, &
959	inflow_damping_height, inflow_damping_width
960	ELSE
961	WRITE ( io, 322 ) y_shift, recycling_width, recycling_plane, &
962	inflow_damping_height, inflow_damping_width
963	END IF
964	ENDIF
965	IF ( turbulent_outflow ) THEN
966	WRITE ( io, 323 ) outflow_source_plane, INT(outflow_source_plane/dx)
967	ENDIF
968	ENDIF
969
970	!
971	!-- Initial Profiles
972	WRITE ( io, 321 )
973	!
974	!-- Initial wind profiles
975	IF ( u_profile(1) /= 9999999.9_wp ) WRITE ( io, 427 )
976
977	!
978	!-- Initial temperature profile
979	!-- Building output strings, starting with surface temperature
980	WRITE ( temperatures, '(F6.2)' ) pt_surface
981	gradients = '------'
982	slices = ' 0'
983	coordinates = ' 0.0'
984	i = 1
985	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
986
987	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
988	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
989
990	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
991	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
992
993	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
994	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
995
996	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
997	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
998
999	IF ( i == 10 ) THEN
1000	EXIT
1001	ELSE
1002	i = i + 1
1003	ENDIF
1004
1005	ENDDO
1006
1007	IF ( .NOT. nudging ) THEN
1008	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1009	TRIM( gradients ), TRIM( slices )
1010	ELSE
1011	WRITE ( io, 428 )
1012	ENDIF
1013
1014	!
1015	!-- Initial humidity profile
1016	!-- Building output strings, starting with surface humidity
1017	IF ( humidity ) THEN
1018	WRITE ( temperatures, '(E8.1)' ) q_surface
1019	gradients = '--------'
1020	slices = ' 0'
1021	coordinates = ' 0.0'
1022	i = 1
1023	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1024
1025	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1026	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1027
1028	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1029	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1030
1031	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1032	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1033
1034	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1035	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1036
1037	IF ( i == 10 ) THEN
1038	EXIT
1039	ELSE
1040	i = i + 1
1041	ENDIF
1042
1043	ENDDO
1044
1045	IF ( .NOT. nudging ) THEN
1046	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1047	TRIM( gradients ), TRIM( slices )
1048	ENDIF
1049	ENDIF
1050	!
1051	!-- Initial scalar profile
1052	!-- Building output strings, starting with surface humidity
1053	IF ( passive_scalar ) THEN
1054	WRITE ( temperatures, '(E8.1)' ) s_surface
1055	gradients = '--------'
1056	slices = ' 0'
1057	coordinates = ' 0.0'
1058	i = 1
1059	DO WHILE ( s_vertical_gradient_level_ind(i) /= -9999 )
1060
1061	WRITE (coor_chr,'(E8.1,4X)') s_init(s_vertical_gradient_level_ind(i))
1062	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1063
1064	WRITE (coor_chr,'(E8.1,4X)') s_vertical_gradient(i)
1065	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1066
1067	WRITE (coor_chr,'(I8,4X)') s_vertical_gradient_level_ind(i)
1068	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1069
1070	WRITE (coor_chr,'(F8.1,4X)') s_vertical_gradient_level(i)
1071	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1072
1073	IF ( i == 10 ) THEN
1074	EXIT
1075	ELSE
1076	i = i + 1
1077	ENDIF
1078
1079	ENDDO
1080
1081	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1082	TRIM( gradients ), TRIM( slices )
1083	ENDIF
1084
1085	!
1086	!-- Initial salinity profile
1087	!-- Building output strings, starting with surface salinity
1088	IF ( ocean_mode ) THEN
1089	WRITE ( temperatures, '(F6.2)' ) sa_surface
1090	gradients = '------'
1091	slices = ' 0'
1092	coordinates = ' 0.0'
1093	i = 1
1094	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1095
1096	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1097	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1098
1099	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1100	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1101
1102	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1103	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1104
1105	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1106	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1107
1108	IF ( i == 10 ) THEN
1109	EXIT
1110	ELSE
1111	i = i + 1
1112	ENDIF
1113
1114	ENDDO
1115
1116	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1117	TRIM( gradients ), TRIM( slices )
1118	ENDIF
1119
1120
1121	!
1122	!-- Listing of 1D-profiles
1123	WRITE ( io, 325 ) dt_dopr_listing
1124	IF ( averaging_interval_pr /= 0.0_wp ) THEN
1125	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
1126	ENDIF
1127
1128	!
1129	!-- DATA output
1130	WRITE ( io, 330 )
1131	IF ( averaging_interval_pr /= 0.0_wp ) THEN
1132	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
1133	ENDIF
1134
1135	!
1136	!-- 1D-profiles
1137	dopr_chr = 'Profile:'
1138	IF ( dopr_n /= 0 ) THEN
1139	WRITE ( io, 331 )
1140
1141	output_format = ''
1142	output_format = netcdf_data_format_string
1143	IF ( netcdf_deflate == 0 ) THEN
1144	WRITE ( io, 344 ) output_format
1145	ELSE
1146	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1147	ENDIF
1148
1149	DO i = 1, dopr_n
1150	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
1151	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
1152	WRITE ( io, 332 ) dopr_chr
1153	dopr_chr = ' :'
1154	ENDIF
1155	ENDDO
1156
1157	IF ( dopr_chr /= '' ) THEN
1158	WRITE ( io, 332 ) dopr_chr
1159	ENDIF
1160	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
1161	IF ( skip_time_dopr /= 0.0_wp ) WRITE ( io, 339 ) skip_time_dopr
1162	ENDIF
1163
1164	!
1165	!-- 2D-arrays
1166	DO av = 0, 1
1167
1168	i = 1
1169	do2d_xy = ''
1170	do2d_xz = ''
1171	do2d_yz = ''
1172	DO WHILE ( do2d(av,i) /= ' ' )
1173
1174	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
1175	do2d_mode = do2d(av,i)(l-1:l)
1176
1177	SELECT CASE ( do2d_mode )
1178	CASE ( 'xy' )
1179	ll = LEN_TRIM( do2d_xy )
1180	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1181	CASE ( 'xz' )
1182	ll = LEN_TRIM( do2d_xz )
1183	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1184	CASE ( 'yz' )
1185	ll = LEN_TRIM( do2d_yz )
1186	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1187	END SELECT
1188
1189	i = i + 1
1190
1191	ENDDO
1192
1193	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
1194	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
1195	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) ) THEN
1196
1197	IF ( av == 0 ) THEN
1198	WRITE ( io, 334 ) ''
1199	ELSE
1200	WRITE ( io, 334 ) '(time-averaged)'
1201	ENDIF
1202
1203	IF ( do2d_at_begin ) THEN
1204	begin_chr = 'and at the start'
1205	ELSE
1206	begin_chr = ''
1207	ENDIF
1208
1209	output_format = ''
1210	output_format = netcdf_data_format_string
1211	IF ( netcdf_deflate == 0 ) THEN
1212	WRITE ( io, 344 ) output_format
1213	ELSE
1214	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1215	ENDIF
1216
1217	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
1218	i = 1
1219	slices = '/'
1220	coordinates = '/'
1221	!
1222	!-- Building strings with index and coordinate information of the
1223	!-- slices
1224	DO WHILE ( section(i,1) /= -9999 )
1225
1226	WRITE (section_chr,'(I5)') section(i,1)
1227	section_chr = ADJUSTL( section_chr )
1228	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1229
1230	IF ( section(i,1) == -1 ) THEN
1231	WRITE (coor_chr,'(F10.1)') -1.0_wp
1232	ELSE
1233	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
1234	ENDIF
1235	coor_chr = ADJUSTL( coor_chr )
1236	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1237
1238	i = i + 1
1239	ENDDO
1240	IF ( av == 0 ) THEN
1241	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
1242	TRIM( begin_chr ), 'k', TRIM( slices ), &
1243	TRIM( coordinates )
1244	IF ( skip_time_do2d_xy /= 0.0_wp ) THEN
1245	WRITE ( io, 339 ) skip_time_do2d_xy
1246	ENDIF
1247	ELSE
1248	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
1249	TRIM( begin_chr ), averaging_interval, &
1250	dt_averaging_input, 'k', TRIM( slices ), &
1251	TRIM( coordinates )
1252	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1253	WRITE ( io, 339 ) skip_time_data_output_av
1254	ENDIF
1255	ENDIF
1256	IF ( netcdf_data_format > 4 ) THEN
1257	WRITE ( io, 352 ) ntdim_2d_xy(av)
1258	ELSE
1259	WRITE ( io, 353 )
1260	ENDIF
1261	ENDIF
1262
1263	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
1264	i = 1
1265	slices = '/'
1266	coordinates = '/'
1267	!
1268	!-- Building strings with index and coordinate information of the
1269	!-- slices
1270	DO WHILE ( section(i,2) /= -9999 )
1271
1272	WRITE (section_chr,'(I5)') section(i,2)
1273	section_chr = ADJUSTL( section_chr )
1274	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1275
1276	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
1277	coor_chr = ADJUSTL( coor_chr )
1278	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1279
1280	i = i + 1
1281	ENDDO
1282	IF ( av == 0 ) THEN
1283	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
1284	TRIM( begin_chr ), 'j', TRIM( slices ), &
1285	TRIM( coordinates )
1286	IF ( skip_time_do2d_xz /= 0.0_wp ) THEN
1287	WRITE ( io, 339 ) skip_time_do2d_xz
1288	ENDIF
1289	ELSE
1290	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
1291	TRIM( begin_chr ), averaging_interval, &
1292	dt_averaging_input, 'j', TRIM( slices ), &
1293	TRIM( coordinates )
1294	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1295	WRITE ( io, 339 ) skip_time_data_output_av
1296	ENDIF
1297	ENDIF
1298	IF ( netcdf_data_format > 4 ) THEN
1299	WRITE ( io, 352 ) ntdim_2d_xz(av)
1300	ELSE
1301	WRITE ( io, 353 )
1302	ENDIF
1303	ENDIF
1304
1305	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
1306	i = 1
1307	slices = '/'
1308	coordinates = '/'
1309	!
1310	!-- Building strings with index and coordinate information of the
1311	!-- slices
1312	DO WHILE ( section(i,3) /= -9999 )
1313
1314	WRITE (section_chr,'(I5)') section(i,3)
1315	section_chr = ADJUSTL( section_chr )
1316	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1317
1318	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
1319	coor_chr = ADJUSTL( coor_chr )
1320	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1321
1322	i = i + 1
1323	ENDDO
1324	IF ( av == 0 ) THEN
1325	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
1326	TRIM( begin_chr ), 'i', TRIM( slices ), &
1327	TRIM( coordinates )
1328	IF ( skip_time_do2d_yz /= 0.0_wp ) THEN
1329	WRITE ( io, 339 ) skip_time_do2d_yz
1330	ENDIF
1331	ELSE
1332	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
1333	TRIM( begin_chr ), averaging_interval, &
1334	dt_averaging_input, 'i', TRIM( slices ), &
1335	TRIM( coordinates )
1336	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1337	WRITE ( io, 339 ) skip_time_data_output_av
1338	ENDIF
1339	ENDIF
1340	IF ( netcdf_data_format > 4 ) THEN
1341	WRITE ( io, 352 ) ntdim_2d_yz(av)
1342	ELSE
1343	WRITE ( io, 353 )
1344	ENDIF
1345	ENDIF
1346
1347	ENDIF
1348
1349	ENDDO
1350
1351	!
1352	!-- 3d-arrays
1353	DO av = 0, 1
1354
1355	i = 1
1356	do3d_chr = ''
1357	DO WHILE ( do3d(av,i) /= ' ' )
1358
1359	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
1360	i = i + 1
1361
1362	ENDDO
1363
1364	IF ( do3d_chr /= '' ) THEN
1365	IF ( av == 0 ) THEN
1366	WRITE ( io, 336 ) ''
1367	ELSE
1368	WRITE ( io, 336 ) '(time-averaged)'
1369	ENDIF
1370
1371	output_format = netcdf_data_format_string
1372	IF ( netcdf_deflate == 0 ) THEN
1373	WRITE ( io, 344 ) output_format
1374	ELSE
1375	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1376	ENDIF
1377
1378	IF ( do3d_at_begin ) THEN
1379	begin_chr = 'and at the start'
1380	ELSE
1381	begin_chr = ''
1382	ENDIF
1383	IF ( av == 0 ) THEN
1384	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1385	zu(nz_do3d), nz_do3d
1386	ELSE
1387	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1388	TRIM( begin_chr ), averaging_interval, &
1389	dt_averaging_input, zu(nz_do3d), nz_do3d
1390	ENDIF
1391
1392	IF ( netcdf_data_format > 4 ) THEN
1393	WRITE ( io, 352 ) ntdim_3d(av)
1394	ELSE
1395	WRITE ( io, 353 )
1396	ENDIF
1397
1398	IF ( av == 0 ) THEN
1399	IF ( skip_time_do3d /= 0.0_wp ) THEN
1400	WRITE ( io, 339 ) skip_time_do3d
1401	ENDIF
1402	ELSE
1403	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1404	WRITE ( io, 339 ) skip_time_data_output_av
1405	ENDIF
1406	ENDIF
1407
1408	ENDIF
1409
1410	ENDDO
1411
1412	!
1413	!-- masked arrays
1414	IF ( masks > 0 ) WRITE ( io, 345 ) &
1415	mask_scale_x, mask_scale_y, mask_scale_z
1416	DO mid = 1, masks
1417	DO av = 0, 1
1418
1419	i = 1
1420	domask_chr = ''
1421	DO WHILE ( domask(mid,av,i) /= ' ' )
1422	domask_chr = TRIM( domask_chr ) // ' ' // &
1423	TRIM( domask(mid,av,i) ) // ','
1424	i = i + 1
1425	ENDDO
1426
1427	IF ( domask_chr /= '' ) THEN
1428	IF ( av == 0 ) THEN
1429	WRITE ( io, 346 ) '', mid
1430	ELSE
1431	WRITE ( io, 346 ) ' (time-averaged)', mid
1432	ENDIF
1433
1434	output_format = netcdf_data_format_string
1435	!-- Parallel output not implemented for mask data, hence
1436	!-- output_format must be adjusted.
1437	IF ( netcdf_data_format == 5 ) output_format = 'netCDF4/HDF5'
1438	IF ( netcdf_data_format == 6 ) output_format = 'netCDF4/HDF5 classic'
1439	IF ( netcdf_deflate == 0 ) THEN
1440	WRITE ( io, 344 ) output_format
1441	ELSE
1442	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1443	ENDIF
1444
1445	IF ( av == 0 ) THEN
1446	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1447	ELSE
1448	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1449	averaging_interval, dt_averaging_input
1450	ENDIF
1451
1452	IF ( av == 0 ) THEN
1453	IF ( skip_time_domask(mid) /= 0.0_wp ) THEN
1454	WRITE ( io, 339 ) skip_time_domask(mid)
1455	ENDIF
1456	ELSE
1457	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1458	WRITE ( io, 339 ) skip_time_data_output_av
1459	ENDIF
1460	ENDIF
1461	!
1462	!-- output locations
1463	DO dim = 1, 3
1464	IF ( mask(mid,dim,1) >= 0.0_wp ) THEN
1465	count = 0
1466	DO WHILE ( mask(mid,dim,count+1) >= 0.0_wp )
1467	count = count + 1
1468	ENDDO
1469	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1470	mask(mid,dim,:count)
1471	ELSEIF ( mask_loop(mid,dim,1) < 0.0_wp .AND. &
1472	mask_loop(mid,dim,2) < 0.0_wp .AND. &
1473	mask_loop(mid,dim,3) == 0.0_wp ) THEN
1474	WRITE ( io, 350 ) dir(dim), dir(dim)
1475	ELSEIF ( mask_loop(mid,dim,3) == 0.0_wp ) THEN
1476	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1477	mask_loop(mid,dim,1:2)
1478	ELSE
1479	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1480	mask_loop(mid,dim,1:3)
1481	ENDIF
1482	ENDDO
1483	ENDIF
1484
1485	ENDDO
1486	ENDDO
1487
1488	!
1489	!-- Timeseries
1490	IF ( dt_dots /= 9999999.9_wp ) THEN
1491	WRITE ( io, 340 )
1492
1493	output_format = netcdf_data_format_string
1494	IF ( netcdf_deflate == 0 ) THEN
1495	WRITE ( io, 344 ) output_format
1496	ELSE
1497	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1498	ENDIF
1499	WRITE ( io, 341 ) dt_dots
1500	ENDIF
1501
1502	!
1503	!-- Restart data formats
1504	IF ( TRIM( initializing_actions ) == 'read_restart_data' .OR. write_binary ) THEN
1505	WRITE ( io, 355 )
1506	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
1507	WRITE ( io, 356 ) TRIM( restart_data_format_input )
1508	ENDIF
1509	IF ( write_binary ) THEN
1510	WRITE ( io, 357 ) TRIM( restart_data_format_output )
1511	ENDIF
1512	ENDIF
1513
1514	WRITE ( io, 99 )
1515
1516	!
1517	!-- Physical quantities
1518	WRITE ( io, 400 )
1519
1520	!
1521	!-- Geostrophic parameters
1522	WRITE ( io, 410 ) latitude, longitude, rotation_angle, omega, f, fs
1523
1524	!
1525	!-- Day and time during model start
1526	CALL get_date_time( 0.0_wp, date_time_str=date_time_str )
1527	WRITE ( io, 456 ) TRIM( date_time_str )
1528
1529	!
1530	!-- Other quantities
1531	WRITE ( io, 411 ) g
1532
1533	WRITE ( io, 412 ) TRIM( reference_state )
1534	IF ( use_single_reference_value ) THEN
1535	IF ( ocean_mode ) THEN
1536	WRITE ( io, 413 ) prho_reference
1537	ELSE
1538	WRITE ( io, 414 ) pt_reference
1539	ENDIF
1540	ENDIF
1541
1542	!
1543	!-- Cloud physcis parameters / quantities / numerical methods
1544	WRITE ( io, 430 )
1545	IF ( humidity .AND. .NOT. bulk_cloud_model .AND. .NOT. cloud_droplets) THEN
1546	WRITE ( io, 431 )
1547	ENDIF
1548	!
1549	!-- LES / turbulence parameters
1550	WRITE ( io, 450 )
1551
1552	!--
1553	! ... LES-constants used must still be added here
1554	!--
1555	IF ( constant_diffusion ) THEN
1556	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1557	prandtl_number
1558	ENDIF
1559	IF ( .NOT. constant_diffusion) THEN
1560	IF ( e_init > 0.0_wp ) WRITE ( io, 455 ) e_init
1561	IF ( e_min > 0.0_wp ) WRITE ( io, 454 ) e_min
1562	IF ( wall_adjustment ) WRITE ( io, 453 )
1563	ENDIF
1564	IF ( rans_mode ) THEN
1565	WRITE ( io, 457 ) rans_const_c, rans_const_sigma
1566	ENDIF
1567	!
1568	!-- Special actions during the run
1569	WRITE ( io, 470 )
1570	IF ( create_disturbances ) THEN
1571	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1572	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1573	zu(disturbance_level_ind_t), disturbance_level_ind_t
1574	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1575	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1576	ELSE
1577	WRITE ( io, 473 ) disturbance_energy_limit
1578	ENDIF
1579	WRITE ( io, 474 ) TRIM( random_generator )
1580	ENDIF
1581	IF ( pt_surface_initial_change /= 0.0_wp ) THEN
1582	WRITE ( io, 475 ) pt_surface_initial_change
1583	ENDIF
1584	IF ( pt_surface_heating_rate /= 0.0_wp ) THEN
1585	WRITE ( io, 476 ) pt_surface_heating_rate
1586	ENDIF
1587	IF ( humidity .AND. q_surface_initial_change /= 0.0_wp ) THEN
1588	WRITE ( io, 477 ) q_surface_initial_change
1589	ENDIF
1590	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0_wp ) THEN
1591	WRITE ( io, 478 ) q_surface_initial_change
1592	ENDIF
1593
1594	!
1595	!-- Parameters of 1D-model
1596	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1597	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1598	mixing_length_1d, dissipation_1d
1599	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1600	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1601	ENDIF
1602	ENDIF
1603
1604	!
1605	!-- Header information from other modules
1606	CALL module_interface_header( io )
1607
1608
1609	WRITE ( io, 99 )
1610
1611	!
1612	!-- Write buffer contents to disc immediately
1613	FLUSH( io )
1614
1615	!
1616	!-- Here the FORMATs start
1617
1618	99 FORMAT (1X,78('-'))
1619	100 FORMAT (/1X,'******************************',4X,44('-')/ &
1620	1X,'* ',A,' *',4X,A/ &
1621	1X,'******************************',4X,44('-'))
1622	101 FORMAT (35X,'coupled run: ',A/ &
1623	35X,42('-'))
1624	102 FORMAT (/' Date: ',A10,4X,'Run: ',A34/ &
1625	' Time: ',A8,4X,'Run-No.: ',I2.2/ &
1626	' Run on host: ',A10)
1627	#if defined( __parallel )
1628	103 FORMAT (' Number of PEs:',10X,I6,4X,'Processor grid (x,y): (',I4,',',I4, &
1629	')',1X,A)
1630	104 FORMAT (' Number of PEs:',10X,I6,4X,'Tasks:',I4,' threads per task:',I4/ &
1631	35X,'Processor grid (x,y): (',I4,',',I4,')',1X,A)
1632	107 FORMAT (35X,'A 1d-decomposition along ',A,' is used')
1633	108 FORMAT (35X,'Max. # of parallel I/O streams is ',I5)
1634	109 FORMAT (35X,'Precursor run for coupled atmos-ocean run'/ &
1635	35X,42('-'))
1636	114 FORMAT (35X,'Coupled atmosphere-ocean run following'/ &
1637	35X,'independent precursor runs'/ &
1638	35X,42('-'))
1639	#endif
1640	110 FORMAT (/' Numerical Schemes:'/ &
1641	' -----------------'/)
1642	124 FORMAT (' --> Use the ',A,' turbulence closure (',A,' mode).')
1643	121 FORMAT (' --> Use the ',A,' approximation for the model equations.')
1644	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1645	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1646	' Iterations (initial/other): ',I3,'/',I3,' omega =',F6.3)
1647	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1648	' or Upstream')
1649	115 FORMAT (' FFT and transpositions are overlapping')
1650	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1651	' or Upstream')
1652	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1653	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
1654	' translation velocity = ',A/ &
1655	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1656	122 FORMAT (' --> Time differencing scheme: ',A)
1657	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1658	' maximum damping coefficient:',F6.3, ' 1/s')
1659	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1660	130 FORMAT (' --> Additional prognostic equation for the total water content')
1661	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1662	F6.2, ' K assumed')
1663	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1664	135 FORMAT (' --> Solve perturbation pressure via ',A,' method (', &
1665	A,'-cycle)'/ &
1666	' number of grid levels: ',I2/ &
1667	' Gauss-Seidel red/black iterations: ',I2)
1668	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1669	I3,')')
1670	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1671	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1672	I3,')'/ &
1673	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1674	I3,')')
1675	139 FORMAT (' --> Loop optimization method: ',A)
1676	140 FORMAT (' maximum residual allowed: ',E10.3)
1677	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1678	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1679	'step')
1680	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1681	'kinetic energy')
1682	144 FORMAT (' masking method is used')
1683	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1684	'conserved'/ &
1685	' using the ',A,' mode')
1686	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1687	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1688	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1689	/' starting from dp_level_b =', F8.3, 'm', A /)
1690	200 FORMAT (//' Run time and time step information:'/ &
1691	' ----------------------------------'/)
1692	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1693	' CFL-factor:',F5.2)
1694	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1695	203 FORMAT ( ' Start time: ',F11.3,' s'/ &
1696	' End time: ',F11.3,' s')
1697	204 FORMAT ( A,F11.3,' s')
1698	205 FORMAT ( A,F11.3,' s',5X,'restart every',17X,F11.3,' s')
1699	206 FORMAT (/' Time reached: ',F11.3,' s'/ &
1700	' CPU-time used: ',F9.3,' s per timestep: ',F9.3,' s'/ &
1701	' per second of simulated time: ',F9.3,' s')
1702	207 FORMAT ( ' Spinup time: ',F11.3,' s')
1703	250 FORMAT (//' Computational grid and domain size:'/ &
1704	' ----------------------------------'// &
1705	' Grid length: dx = ',F8.3,' m dy = ',F8.3, ' m')
1706	251 FORMAT ( /' Domain size: x = ',F10.3,' m y = ',F10.3, &
1707	' m z(u) = ',F10.3,' m'/)
1708	253 FORMAT ( ' dz(',I1,') = ', F8.3, ' m')
1709	254 FORMAT (//' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1710	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1711	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1712	' degrees')
1713	270 FORMAT (//' Topography information:'/ &
1714	' ----------------------'// &
1715	1X,'Topography: ',A)
1716	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1717	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1718	' / ',I4)
1719	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1720	' direction' / &
1721	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1722	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1723	273 FORMAT ( ' Tunnel of infinite length in ',A, &
1724	' direction' / &
1725	' Tunnel height: ', F6.2, / &
1726	' Tunnel-wall depth: ', F6.2 / &
1727	' Tunnel width: ', F6.2 )
1728	274 FORMAT ( ' Tunnel in ', A, ' direction.' / &
1729	' Tunnel height: ', F6.2, / &
1730	' Tunnel-wall depth: ', F6.2 / &
1731	' Tunnel width: ', F6.2, / &
1732	' Tunnel length: ', F6.2 )
1733	278 FORMAT (' Topography grid definition convention:'/ &
1734	' cell edge (staggered grid points'/ &
1735	' (u in x-direction, v in y-direction))' /)
1736	279 FORMAT (' Topography grid definition convention:'/ &
1737	' cell center (scalar grid points)' /)
1738	280 FORMAT (' Complex terrain simulation is activated.')
1739	281 FORMAT (' --> Mean inflow profiles are adjusted.' / &
1740	' --> Elevation of inflow boundary: ', F7.1, ' m' )
1741	282 FORMAT (' --> Initial data from 3D-precursor run is shifted' / &
1742	' vertically depending on local surface height.')
1743	300 FORMAT (//' Boundary conditions:'/ &
1744	' -------------------'// &
1745	' p uv ', &
1746	' pt'// &
1747	' B. bound.: ',A/ &
1748	' T. bound.: ',A)
1749	301 FORMAT (/' ',A// &
1750	' B. bound.: ',A/ &
1751	' T. bound.: ',A)
1752	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1753	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1754	305 FORMAT (//' Constant flux layer between bottom surface and first ', &
1755	'computational u,v-level:'// &
1756	' z_mo = ',F6.2,' m z0 =',F7.4,' m z0h =',F8.5,&
1757	' m kappa =',F5.2/ &
1758	' Rif value range: ',F8.2,' <= rif <=',F6.2)
1759	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1760	307 FORMAT (' Heatflux has a random normal distribution')
1761	308 FORMAT (' Predefined surface temperature')
1762	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1763	310 FORMAT (//' 1D-Model:'// &
1764	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1765	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' kg/kg m/s')
1766	312 FORMAT (' Predefined surface humidity')
1767	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1768	314 FORMAT (' Predefined scalar value at the surface')
1769	302 FORMAT (' Predefined constant scalarflux: ',F9.6,' kg/(m**2 s)')
1770	315 FORMAT (' Humidity flux at top surface is 0.0')
1771	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1772	'atmosphere model')
1773	317 FORMAT (//' Lateral boundaries:'/ &
1774	' left/right: ',A/ &
1775	' north/south: ',A)
1776	318 FORMAT (/' use_cmax: ',L1 / &
1777	' pt damping layer width = ',F8.2,' m, pt ', &
1778	'damping factor =',F7.4)
1779	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1780	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1781	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1782	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1783	' v: ',F9.6,' m2/s2')
1784	321 FORMAT (//' Initial profiles:'/ &
1785	' ----------------')
1786	322 FORMAT (' turbulence recycling at inflow switched on'/ &
1787	' y-shift of the recycled inflow turbulence is',I3,' PE'/ &
1788	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1789	' inflow damping height: ',F6.1,' m width: ',F6.1,' m'/)
1790	323 FORMAT (' turbulent outflow conditon switched on'/ &
1791	' position of outflow source plane: ',F7.1,' m ', &
1792	'grid index: ', I4)
1793	325 FORMAT (//' List output:'/ &
1794	' -----------'// &
1795	' 1D-Profiles:'/ &
1796	' Output every ',F10.2,' s')
1797	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1798	' Averaging input every ',F8.2,' s')
1799	330 FORMAT (//' Data output:'/ &
1800	' -----------'/)
1801	331 FORMAT (/' 1D-Profiles:')
1802	332 FORMAT (/' ',A)
1803	333 FORMAT (' Output every ',F8.2,' s',/ &
1804	' Time averaged over ',F8.2,' s'/ &
1805	' Averaging input every ',F8.2,' s')
1806	334 FORMAT (/' 2D-Arrays',A,':')
1807	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1808	' Output every ',F8.2,' s ',A/ &
1809	' Cross sections at ',A1,' = ',A/ &
1810	' scalar-coordinates: ',A,' m'/)
1811	336 FORMAT (/' 3D-Arrays',A,':')
1812	337 FORMAT (/' Arrays: ',A/ &
1813	' Output every ',F8.2,' s ',A/ &
1814	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1815	339 FORMAT (' No output during initial ',F8.2,' s')
1816	340 FORMAT (/' Time series:')
1817	341 FORMAT (' Output every ',F8.2,' s'/)
1818	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1819	' Output every ',F8.2,' s ',A/ &
1820	' Time averaged over ',F8.2,' s'/ &
1821	' Averaging input every ',F8.2,' s'/ &
1822	' Cross sections at ',A1,' = ',A/ &
1823	' scalar-coordinates: ',A,' m'/)
1824	343 FORMAT (/' Arrays: ',A/ &
1825	' Output every ',F8.2,' s ',A/ &
1826	' Time averaged over ',F8.2,' s'/ &
1827	' Averaging input every ',F8.2,' s'/ &
1828	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1829	344 FORMAT (' Output format: ',A/)
1830	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1831	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1832	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1833	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1834	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1835	347 FORMAT (' Variables: ',A/ &
1836	' Output every ',F8.2,' s')
1837	348 FORMAT (' Variables: ',A/ &
1838	' Output every ',F8.2,' s'/ &
1839	' Time averaged over ',F8.2,' s'/ &
1840	' Averaging input every ',F8.2,' s')
1841	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1842	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1843	13(' ',8(F8.2,',')/) )
1844	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1845	'all gridpoints along ',A,'-direction (default).' )
1846	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1847	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1848	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1849	352 FORMAT (/' Number of output time levels allowed: ',I3 /)
1850	353 FORMAT (/' Number of output time levels allowed: unlimited' /)
1851	354 FORMAT (' Output format: ',A, ' compressed with level: ',I1/)
1852	355 FORMAT (/' Restart data format(s):')
1853	356 FORMAT (' Input format: ',A)
1854	357 FORMAT (' Output format: ',A)
1855	400 FORMAT (//' Physical quantities:'/ &
1856	' -------------------'/)
1857	410 FORMAT (' Geograph. latitude : latitude = ',F5.1,' degr'/ &
1858	' Geograph. longitude : longitude = ',F5.1,' degr'/ &
1859	' Rotation angle : rotation_angle = ',F5.1,' degr'/ &
1860	' Angular velocity : omega =',E10.3,' rad/s'/ &
1861	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1862	' f* = ',F9.6,' 1/s')
1863	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1864	412 FORMAT (/' Reference state used in buoyancy terms: ',A)
1865	413 FORMAT (' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1866	414 FORMAT (' Reference temperature in buoyancy terms: ',F8.4,' K')
1867	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1868	' Height: ',A,' m'/ &
1869	' Temperature: ',A,' K'/ &
1870	' Gradient: ',A,' K/100m'/ &
1871	' Gridpoint: ',A)
1872	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1873	' Height: ',A,' m'/ &
1874	' Humidity: ',A,' kg/kg'/ &
1875	' Gradient: ',A,' (kg/kg)/100m'/ &
1876	' Gridpoint: ',A)
1877	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1878	' Height: ',A,' m'/ &
1879	' Scalar concentration: ',A,' kg/m**3'/ &
1880	' Gradient: ',A,' (kg/m**3)/100m'/ &
1881	' Gridpoint: ',A)
1882	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1883	' Height: ',A,' m'/ &
1884	' ug: ',A,' m/s'/ &
1885	' Gradient: ',A,' 1/100s'/ &
1886	' Gridpoint: ',A)
1887	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1888	' Height: ',A,' m'/ &
1889	' vg: ',A,' m/s'/ &
1890	' Gradient: ',A,' 1/100s'/ &
1891	' Gridpoint: ',A)
1892	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1893	' Height: ',A,' m'/ &
1894	' Salinity: ',A,' psu'/ &
1895	' Gradient: ',A,' psu/100m'/ &
1896	' Gridpoint: ',A)
1897	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1898	' Height: ',A,' m'/ &
1899	' w_subs: ',A,' m/s'/ &
1900	' Gradient: ',A,' (m/s)/100m'/ &
1901	' Gridpoint: ',A)
1902	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1903	' profiles')
1904	428 FORMAT (/' Initial profiles (u, v, pt, q) are taken from file '/ &
1905	' NUDGING_DATA')
1906	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1907	' ----------------------------------'/)
1908	431 FORMAT (' Humidity is considered, bu no condensation')
1909	450 FORMAT (//' LES / Turbulence quantities:'/ &
1910	' ---------------------------'/)
1911	451 FORMAT (' Diffusion coefficients are constant:'/ &
1912	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1913	453 FORMAT (' Mixing length is limited close to surfaces')
1914	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1915	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1916	456 FORMAT (/' Date and time at model start : ',A)
1917	457 FORMAT (' RANS-mode constants: c_0 = ',F9.5/ &
1918	' c_1 = ',F9.5/ &
1919	' c_2 = ',F9.5/ &
1920	' c_3 = ',F9.5/ &
1921	' c_4 = ',F9.5/ &
1922	' sigma_e = ',F9.5/ &
1923	' sigma_diss = ',F9.5)
1924	470 FORMAT (//' Actions during the simulation:'/ &
1925	' -----------------------------'/)
1926	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1927	' Disturbance amplitude : ',F5.2, ' m/s'/ &
1928	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1929	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1930	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1931	' to i/j =',I4)
1932	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1933	F6.3, ' m2/s2')
1934	474 FORMAT (' Random number generator used : ',A/)
1935	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1936	'respectively, if'/ &
1937	' the value is negative) by ',F5.2,' K at the beginning of the',&
1938	' 3D-simulation'/)
1939	476 FORMAT (' The surface temperature increases (or decreases, ', &
1940	'respectively, if'/ &
1941	' the value is negative) by ',F8.4,' K/h during the', &
1942	' 3D-simulation'/)
1943	477 FORMAT (' The surface humidity is increased (or decreased, ',&
1944	'respectively, if the'/ &
1945	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1946	' the 3D-simulation'/)
1947	478 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1948	'respectively, if the'/ &
1949	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1950	' the 3D-simulation'/)
1951	500 FORMAT (//' 1D-Model parameters:'/ &
1952	' -------------------'// &
1953	' Simulation time: ',F8.1,' s'/ &
1954	' Run-controll output every: ',F8.1,' s'/ &
1955	' Vertical profile output every: ',F8.1,' s'/ &
1956	' Mixing length calculation: ',A/ &
1957	' Dissipation calculation: ',A/)
1958	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1959	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
1960	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
1961	512 FORMAT (/' Date: ',A10,6X,'Run: ',A34/ &
1962	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
1963	' Run on host: ',A10,6X,'En-No.: ',I2.2)
1964	#if defined( __parallel )
1965	600 FORMAT (/' Nesting informations:'/ &
1966	' --------------------'/ &
1967	' Nesting mode: ',A/ &
1968	' Nesting-datatransfer mode: ',A// &
1969	' Nest id parent number lower left coordinates name'/ &
1970	' (*=me) id of PEs x (m) y (m)' )
1971	601 FORMAT (2X,A1,1X,I2.2,6X,I2.2,5X,I5,5X,F8.2,2X,F8.2,5X,A)
1972	#endif
1973
1974	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |