Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 438

Last change on this file since 438 was 430, checked in by raasch, 15 years ago
bugfix concerning gradient_level indices in header
Property svn:keywords set to `Id`
File size: 75.9 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! +large scale vertical motion (subsidence/ascent)
7	! Bugfix: index problem concerning gradient_level indices removed
8	!
9	!
10	! Branch revisions:
11	! -----------------
12	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
13	! mask_scale\|_x\|y\|z, masks, netcdf_format_mask[_av], skip_time_domask
14	!
15	! Former revisions:
16	! -----------------
17	! $Id: header.f90 430 2010-01-29 09:14:09Z raasch $
18	!
19	! 346 2009-07-06 10:13:41Z raasch
20	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
21	! Coupling with independent precursor runs.
22	! Output of messages replaced by message handling routine.
23	! Output of several additional dvr parameters
24	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
25	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
26	! dp_smooth, dpdxy, u_bulk, v_bulk
27	! topography_grid_convention moved from user_header
28	! small bugfix concerning 3d 64bit netcdf output format
29	!
30	! 206 2008-10-13 14:59:11Z raasch
31	! Bugfix: error in zu index in case of section_xy = -1
32	!
33	! 198 2008-09-17 08:55:28Z raasch
34	! Format adjustments allowing output of larger revision numbers
35	!
36	! 197 2008-09-16 15:29:03Z raasch
37	! allow 100 spectra levels instead of 10 for consistency with
38	! define_netcdf_header,
39	! bugfix in the output of the characteristic levels of potential temperature,
40	! geostrophic wind, scalar concentration, humidity and leaf area density,
41	! output of turbulence recycling informations
42	!
43	! 138 2007-11-28 10:03:58Z letzel
44	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
45	! Allow two instead of one digit to specify isosurface and slicer variables.
46	! Output of sorting frequency of particles
47	!
48	! 108 2007-08-24 15:10:38Z letzel
49	! Output of informations for coupled model runs (boundary conditions etc.)
50	! + output of momentumfluxes at the top boundary
51	! Rayleigh damping for ocean, e_init
52	!
53	! 97 2007-06-21 08:23:15Z raasch
54	! Adjustments for the ocean version.
55	! use_pt_reference renamed use_reference
56	!
57	! 87 2007-05-22 15:46:47Z raasch
58	! Bugfix: output of use_upstream_for_tke
59	!
60	! 82 2007-04-16 15:40:52Z raasch
61	! Preprocessor strings for different linux clusters changed to "lc",
62	! routine local_flush is used for buffer flushing
63	!
64	! 76 2007-03-29 00:58:32Z raasch
65	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
66	! output of the loop optimization method, moisture renamed humidity,
67	! output of subversion revision number
68	!
69	! 19 2007-02-23 04:53:48Z raasch
70	! Output of scalar flux applied at top boundary
71	!
72	! RCS Log replace by Id keyword, revision history cleaned up
73	!
74	! Revision 1.63 2006/08/22 13:53:13 raasch
75	! Output of dz_max
76	!
77	! Revision 1.1 1997/08/11 06:17:20 raasch
78	! Initial revision
79	!
80	!
81	! Description:
82	! ------------
83	! Writing a header with all important informations about the actual run.
84	! This subroutine is called three times, two times at the beginning
85	! (writing information on files RUN_CONTROL and HEADER) and one time at the
86	! end of the run, then writing additional information about CPU-usage on file
87	! header.
88	!-----------------------------------------------------------------------------!
89
90	USE arrays_3d
91	USE control_parameters
92	USE cloud_parameters
93	USE cpulog
94	USE dvrp_variables
95	USE grid_variables
96	USE indices
97	USE model_1d
98	USE particle_attributes
99	USE pegrid
100	USE subsidence_mod
101	USE spectrum
102
103	IMPLICIT NONE
104
105	CHARACTER (LEN=1) :: prec
106	CHARACTER (LEN=2) :: do2d_mode
107	CHARACTER (LEN=5) :: section_chr
108	CHARACTER (LEN=9) :: time_to_string
109	CHARACTER (LEN=10) :: coor_chr, host_chr
110	CHARACTER (LEN=16) :: begin_chr
111	CHARACTER (LEN=23) :: ver_rev
112	CHARACTER (LEN=40) :: output_format
113	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
114	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
115	domask_chr, run_classification
116	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
117	temperatures, ugcomponent, vgcomponent
118	CHARACTER (LEN=85) :: roben, runten
119
120	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
121
122	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
123	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
124	REAL :: cpuseconds_per_simulated_second
125
126	!
127	!-- Open the output file. At the end of the simulation, output is directed
128	!-- to unit 19.
129	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
130	.NOT. simulated_time_at_begin /= simulated_time ) THEN
131	io = 15 ! header output on file RUN_CONTROL
132	ELSE
133	io = 19 ! header output on file HEADER
134	ENDIF
135	CALL check_open( io )
136
137	!
138	!-- At the end of the run, output file (HEADER) will be rewritten with
139	!-- new informations
140	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
141
142	!
143	!-- Determine kind of model run
144	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
145	run_classification = '3D - restart run'
146	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
147	run_classification = '3D - run with cyclic fill of 3D - prerun data'
148	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
149	run_classification = '3D - run without 1D - prerun'
150	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
151	run_classification = '3D - run with 1D - prerun'
152	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
153	run_classification = '3D - run initialized by user'
154	ELSE
155	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
156	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
157	ENDIF
158	IF ( ocean ) THEN
159	run_classification = 'ocean - ' // run_classification
160	ELSE
161	run_classification = 'atmosphere - ' // run_classification
162	ENDIF
163
164	!
165	!-- Run-identification, date, time, host
166	host_chr = host(1:10)
167	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
168	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
169	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
170	#if defined( __mpi2 )
171	mpi_type = 2
172	#else
173	mpi_type = 1
174	#endif
175	WRITE ( io, 101 ) mpi_type, coupling_mode
176	ENDIF
177	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
178	ADJUSTR( host_chr )
179	#if defined( __parallel )
180	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
181	char1 = 'calculated'
182	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
183	host(1:2) == 'lc' ) .AND. &
184	npex == -1 .AND. pdims(2) == 1 ) THEN
185	char1 = 'forced'
186	ELSE
187	char1 = 'predefined'
188	ENDIF
189	IF ( threads_per_task == 1 ) THEN
190	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
191	ELSE
192	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
193	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
194	ENDIF
195	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
196	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
197	npex == -1 .AND. pdims(2) == 1 ) &
198	THEN
199	WRITE ( io, 106 )
200	ELSEIF ( pdims(2) == 1 ) THEN
201	WRITE ( io, 107 ) 'x'
202	ELSEIF ( pdims(1) == 1 ) THEN
203	WRITE ( io, 107 ) 'y'
204	ENDIF
205	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
206	#endif
207	WRITE ( io, 99 )
208
209	!
210	!-- Numerical schemes
211	WRITE ( io, 110 )
212	IF ( psolver(1:7) == 'poisfft' ) THEN
213	WRITE ( io, 111 ) TRIM( fft_method )
214	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
215	ELSEIF ( psolver == 'sor' ) THEN
216	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
217	ELSEIF ( psolver == 'multigrid' ) THEN
218	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
219	IF ( mg_cycles == -1 ) THEN
220	WRITE ( io, 140 ) residual_limit
221	ELSE
222	WRITE ( io, 141 ) mg_cycles
223	ENDIF
224	IF ( mg_switch_to_pe0_level == 0 ) THEN
225	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
226	nzt_mg(1)
227	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
228	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
229	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
230	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
231	nzt_mg(mg_switch_to_pe0_level), &
232	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
233	nzt_mg(1)
234	ENDIF
235	ENDIF
236	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
237	THEN
238	WRITE ( io, 142 )
239	ENDIF
240
241	IF ( momentum_advec == 'pw-scheme' ) THEN
242	WRITE ( io, 113 )
243	ELSE
244	WRITE ( io, 114 )
245	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
246	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
247	overshoot_limit_w /= 0.0 ) THEN
248	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
249	overshoot_limit_w
250	ENDIF
251	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
252	ups_limit_w /= 0.0 ) &
253	THEN
254	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
255	ENDIF
256	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
257	ENDIF
258	IF ( scalar_advec == 'pw-scheme' ) THEN
259	WRITE ( io, 116 )
260	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
261	WRITE ( io, 117 )
262	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
263	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
264	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
265	ENDIF
266	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
267	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
268	ENDIF
269	ELSE
270	WRITE ( io, 118 )
271	ENDIF
272
273	WRITE ( io, 139 ) TRIM( loop_optimization )
274
275	IF ( galilei_transformation ) THEN
276	IF ( use_ug_for_galilei_tr ) THEN
277	char1 = 'geostrophic wind'
278	ELSE
279	char1 = 'mean wind in model domain'
280	ENDIF
281	IF ( simulated_time_at_begin == simulated_time ) THEN
282	char2 = 'at the start of the run'
283	ELSE
284	char2 = 'at the end of the run'
285	ENDIF
286	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
287	advected_distance_x/1000.0, advected_distance_y/1000.0
288	ENDIF
289	IF ( timestep_scheme == 'leapfrog' ) THEN
290	WRITE ( io, 120 )
291	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
292	WRITE ( io, 121 )
293	ELSE
294	WRITE ( io, 122 ) timestep_scheme
295	ENDIF
296	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
297	IF ( rayleigh_damping_factor /= 0.0 ) THEN
298	IF ( .NOT. ocean ) THEN
299	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
300	rayleigh_damping_factor
301	ELSE
302	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
303	rayleigh_damping_factor
304	ENDIF
305	ENDIF
306	IF ( humidity ) THEN
307	IF ( .NOT. cloud_physics ) THEN
308	WRITE ( io, 129 )
309	ELSE
310	WRITE ( io, 130 )
311	WRITE ( io, 131 )
312	IF ( radiation ) WRITE ( io, 132 )
313	IF ( precipitation ) WRITE ( io, 133 )
314	ENDIF
315	ENDIF
316	IF ( passive_scalar ) WRITE ( io, 134 )
317	IF ( conserve_volume_flow ) THEN
318	WRITE ( io, 150 ) conserve_volume_flow_mode
319	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
320	WRITE ( io, 151 ) u_bulk, v_bulk
321	ENDIF
322	ELSEIF ( dp_external ) THEN
323	IF ( dp_smooth ) THEN
324	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
325	ELSE
326	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
327	ENDIF
328	ENDIF
329	IF ( large_scale_subsidence ) THEN
330	WRITE ( io, 153 )
331	WRITE ( io, 154 )
332	ENDIF
333	WRITE ( io, 99 )
334
335	!
336	!-- Runtime and timestep informations
337	WRITE ( io, 200 )
338	IF ( .NOT. dt_fixed ) THEN
339	WRITE ( io, 201 ) dt_max, cfl_factor
340	ELSE
341	WRITE ( io, 202 ) dt
342	ENDIF
343	WRITE ( io, 203 ) simulated_time_at_begin, end_time
344
345	IF ( time_restart /= 9999999.9 .AND. &
346	simulated_time_at_begin == simulated_time ) THEN
347	IF ( dt_restart == 9999999.9 ) THEN
348	WRITE ( io, 204 ) ' Restart at: ',time_restart
349	ELSE
350	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
351	ENDIF
352	ENDIF
353
354	IF ( simulated_time_at_begin /= simulated_time ) THEN
355	i = MAX ( log_point_s(10)%counts, 1 )
356	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
357	cpuseconds_per_simulated_second = 0.0
358	ELSE
359	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
360	( simulated_time - &
361	simulated_time_at_begin )
362	ENDIF
363	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
364	log_point_s(10)%sum / REAL( i ), &
365	cpuseconds_per_simulated_second
366	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
367	IF ( dt_restart == 9999999.9 ) THEN
368	WRITE ( io, 204 ) ' Next restart at: ',time_restart
369	ELSE
370	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
371	ENDIF
372	ENDIF
373	ENDIF
374
375	!
376	!-- Start time for coupled runs, if independent precursor runs for atmosphere
377	!-- and ocean are used. In this case, coupling_start_time defines the time
378	!-- when the coupling is switched on.
379	IF ( coupling_start_time /= 0.0 ) THEN
380	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
381	char1 = 'Precursor run for a coupled atmosphere-ocean run'
382	ELSE
383	char1 = 'Coupled atmosphere-ocean run following independent ' // &
384	'precursor runs'
385	ENDIF
386	WRITE ( io, 207 ) char1, coupling_start_time
387	ENDIF
388
389	!
390	!-- Computational grid
391	IF ( .NOT. ocean ) THEN
392	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
393	IF ( dz_stretch_level_index < nzt+1 ) THEN
394	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
395	dz_stretch_factor, dz_max
396	ENDIF
397	ELSE
398	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
399	IF ( dz_stretch_level_index > 0 ) THEN
400	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
401	dz_stretch_factor, dz_max
402	ENDIF
403	ENDIF
404	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
405	MIN( nnz+2, nzt+2 )
406	IF ( numprocs > 1 ) THEN
407	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
408	WRITE ( io, 255 )
409	ELSE
410	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
411	ENDIF
412	ENDIF
413	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
414
415	!
416	!-- Topography
417	WRITE ( io, 270 ) topography
418	SELECT CASE ( TRIM( topography ) )
419
420	CASE ( 'flat' )
421	! no actions necessary
422
423	CASE ( 'single_building' )
424	blx = INT( building_length_x / dx )
425	bly = INT( building_length_y / dy )
426	bh = INT( building_height / dz )
427
428	IF ( building_wall_left == 9999999.9 ) THEN
429	building_wall_left = ( nx + 1 - blx ) / 2 * dx
430	ENDIF
431	bxl = INT ( building_wall_left / dx + 0.5 )
432	bxr = bxl + blx
433
434	IF ( building_wall_south == 9999999.9 ) THEN
435	building_wall_south = ( ny + 1 - bly ) / 2 * dy
436	ENDIF
437	bys = INT ( building_wall_south / dy + 0.5 )
438	byn = bys + bly
439
440	WRITE ( io, 271 ) building_length_x, building_length_y, &
441	building_height, bxl, bxr, bys, byn
442
443	CASE ( 'single_street_canyon' )
444	ch = NINT( canyon_height / dz )
445	IF ( canyon_width_x /= 9999999.9 ) THEN
446	!
447	!-- Street canyon in y direction
448	cwx = NINT( canyon_width_x / dx )
449	IF ( canyon_wall_left == 9999999.9 ) THEN
450	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
451	ENDIF
452	cxl = NINT( canyon_wall_left / dx )
453	cxr = cxl + cwx
454	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
455
456	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
457	!
458	!-- Street canyon in x direction
459	cwy = NINT( canyon_width_y / dy )
460	IF ( canyon_wall_south == 9999999.9 ) THEN
461	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
462	ENDIF
463	cys = NINT( canyon_wall_south / dy )
464	cyn = cys + cwy
465	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
466	ENDIF
467
468	END SELECT
469
470	IF ( TRIM( topography ) /= 'flat' ) THEN
471	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
472	IF ( TRIM( topography ) == 'single_building' .OR. &
473	TRIM( topography ) == 'single_street_canyon' ) THEN
474	WRITE ( io, 278 )
475	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
476	WRITE ( io, 279 )
477	ENDIF
478	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
479	WRITE ( io, 278 )
480	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
481	WRITE ( io, 279 )
482	ENDIF
483	ENDIF
484
485	IF ( plant_canopy ) THEN
486
487	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
488	IF ( passive_scalar ) THEN
489	WRITE ( io, 281 ) scalar_exchange_coefficient, &
490	leaf_surface_concentration
491	ENDIF
492
493	!
494	!-- Heat flux at the top of vegetation
495	WRITE ( io, 282 ) cthf
496
497	!
498	!-- Leaf area density profile
499	!-- Building output strings, starting with surface value
500	WRITE ( learde, '(F6.2)' ) lad_surface
501	gradients = '------'
502	slices = ' 0'
503	coordinates = ' 0.0'
504	i = 1
505	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
506
507	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
508	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
509
510	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
511	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
512
513	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
514	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
515
516	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
517	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
518
519	i = i + 1
520	ENDDO
521
522	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
523	TRIM( gradients ), TRIM( slices )
524
525	ENDIF
526
527	!
528	!-- Boundary conditions
529	IF ( ibc_p_b == 0 ) THEN
530	runten = 'p(0) = 0 \|'
531	ELSEIF ( ibc_p_b == 1 ) THEN
532	runten = 'p(0) = p(1) \|'
533	ELSE
534	runten = 'p(0) = p(1) +R\|'
535	ENDIF
536	IF ( ibc_p_t == 0 ) THEN
537	roben = 'p(nzt+1) = 0 \|'
538	ELSE
539	roben = 'p(nzt+1) = p(nzt) \|'
540	ENDIF
541
542	IF ( ibc_uv_b == 0 ) THEN
543	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
544	ELSE
545	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
546	ENDIF
547	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
548	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
549	ELSEIF ( ibc_uv_t == 0 ) THEN
550	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
551	ELSE
552	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
553	ENDIF
554
555	IF ( ibc_pt_b == 0 ) THEN
556	runten = TRIM( runten ) // ' pt(0) = pt_surface'
557	ELSEIF ( ibc_pt_b == 1 ) THEN
558	runten = TRIM( runten ) // ' pt(0) = pt(1)'
559	ELSEIF ( ibc_pt_b == 2 ) THEN
560	runten = TRIM( runten ) // ' pt(0) = from coupled model'
561	ENDIF
562	IF ( ibc_pt_t == 0 ) THEN
563	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
564	ELSEIF( ibc_pt_t == 1 ) THEN
565	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
566	ELSEIF( ibc_pt_t == 2 ) THEN
567	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
568	ENDIF
569
570	WRITE ( io, 300 ) runten, roben
571
572	IF ( .NOT. constant_diffusion ) THEN
573	IF ( ibc_e_b == 1 ) THEN
574	runten = 'e(0) = e(1)'
575	ELSE
576	runten = 'e(0) = e(1) = (u/0.1)*2'
577	ENDIF
578	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
579
580	WRITE ( io, 301 ) 'e', runten, roben
581
582	ENDIF
583
584	IF ( ocean ) THEN
585	runten = 'sa(0) = sa(1)'
586	IF ( ibc_sa_t == 0 ) THEN
587	roben = 'sa(nzt+1) = sa_surface'
588	ELSE
589	roben = 'sa(nzt+1) = sa(nzt)'
590	ENDIF
591	WRITE ( io, 301 ) 'sa', runten, roben
592	ENDIF
593
594	IF ( humidity ) THEN
595	IF ( ibc_q_b == 0 ) THEN
596	runten = 'q(0) = q_surface'
597	ELSE
598	runten = 'q(0) = q(1)'
599	ENDIF
600	IF ( ibc_q_t == 0 ) THEN
601	roben = 'q(nzt) = q_top'
602	ELSE
603	roben = 'q(nzt) = q(nzt-1) + dq/dz'
604	ENDIF
605	WRITE ( io, 301 ) 'q', runten, roben
606	ENDIF
607
608	IF ( passive_scalar ) THEN
609	IF ( ibc_q_b == 0 ) THEN
610	runten = 's(0) = s_surface'
611	ELSE
612	runten = 's(0) = s(1)'
613	ENDIF
614	IF ( ibc_q_t == 0 ) THEN
615	roben = 's(nzt) = s_top'
616	ELSE
617	roben = 's(nzt) = s(nzt-1) + ds/dz'
618	ENDIF
619	WRITE ( io, 301 ) 's', runten, roben
620	ENDIF
621
622	IF ( use_surface_fluxes ) THEN
623	WRITE ( io, 303 )
624	IF ( constant_heatflux ) THEN
625	WRITE ( io, 306 ) surface_heatflux
626	IF ( random_heatflux ) WRITE ( io, 307 )
627	ENDIF
628	IF ( humidity .AND. constant_waterflux ) THEN
629	WRITE ( io, 311 ) surface_waterflux
630	ENDIF
631	IF ( passive_scalar .AND. constant_waterflux ) THEN
632	WRITE ( io, 313 ) surface_waterflux
633	ENDIF
634	ENDIF
635
636	IF ( use_top_fluxes ) THEN
637	WRITE ( io, 304 )
638	IF ( coupling_mode == 'uncoupled' ) THEN
639	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
640	IF ( constant_top_heatflux ) THEN
641	WRITE ( io, 306 ) top_heatflux
642	ENDIF
643	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
644	WRITE ( io, 316 )
645	ENDIF
646	IF ( ocean .AND. constant_top_salinityflux ) THEN
647	WRITE ( io, 309 ) top_salinityflux
648	ENDIF
649	IF ( humidity .OR. passive_scalar ) THEN
650	WRITE ( io, 315 )
651	ENDIF
652	ENDIF
653
654	IF ( prandtl_layer ) THEN
655	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
656	rif_min, rif_max
657	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
658	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
659	WRITE ( io, 312 )
660	ENDIF
661	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
662	WRITE ( io, 314 )
663	ENDIF
664	ELSE
665	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
666	WRITE ( io, 310 ) rif_min, rif_max
667	ENDIF
668	ENDIF
669
670	WRITE ( io, 317 ) bc_lr, bc_ns
671	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
672	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
673	IF ( turbulent_inflow ) THEN
674	WRITE ( io, 319 ) recycling_width, recycling_plane, &
675	inflow_damping_height, inflow_damping_width
676	ENDIF
677	ENDIF
678
679	!
680	!-- Listing of 1D-profiles
681	WRITE ( io, 325 ) dt_dopr_listing
682	IF ( averaging_interval_pr /= 0.0 ) THEN
683	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
684	ENDIF
685
686	!
687	!-- DATA output
688	WRITE ( io, 330 )
689	IF ( averaging_interval_pr /= 0.0 ) THEN
690	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
691	ENDIF
692
693	!
694	!-- 1D-profiles
695	dopr_chr = 'Profile:'
696	IF ( dopr_n /= 0 ) THEN
697	WRITE ( io, 331 )
698
699	output_format = ''
700	IF ( netcdf_output ) THEN
701	IF ( netcdf_64bit ) THEN
702	output_format = 'netcdf (64 bit offset)'
703	ELSE
704	output_format = 'netcdf'
705	ENDIF
706	ENDIF
707	IF ( profil_output ) THEN
708	IF ( netcdf_output ) THEN
709	output_format = TRIM( output_format ) // ' and profil'
710	ELSE
711	output_format = 'profil'
712	ENDIF
713	ENDIF
714	WRITE ( io, 344 ) output_format
715
716	DO i = 1, dopr_n
717	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
718	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
719	WRITE ( io, 332 ) dopr_chr
720	dopr_chr = ' :'
721	ENDIF
722	ENDDO
723
724	IF ( dopr_chr /= '' ) THEN
725	WRITE ( io, 332 ) dopr_chr
726	ENDIF
727	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
728	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
729	ENDIF
730
731	!
732	!-- 2D-arrays
733	DO av = 0, 1
734
735	i = 1
736	do2d_xy = ''
737	do2d_xz = ''
738	do2d_yz = ''
739	DO WHILE ( do2d(av,i) /= ' ' )
740
741	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
742	do2d_mode = do2d(av,i)(l-1:l)
743
744	SELECT CASE ( do2d_mode )
745	CASE ( 'xy' )
746	ll = LEN_TRIM( do2d_xy )
747	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
748	CASE ( 'xz' )
749	ll = LEN_TRIM( do2d_xz )
750	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
751	CASE ( 'yz' )
752	ll = LEN_TRIM( do2d_yz )
753	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
754	END SELECT
755
756	i = i + 1
757
758	ENDDO
759
760	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
761	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
762	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
763	( netcdf_output .OR. iso2d_output ) ) THEN
764
765	IF ( av == 0 ) THEN
766	WRITE ( io, 334 ) ''
767	ELSE
768	WRITE ( io, 334 ) '(time-averaged)'
769	ENDIF
770
771	IF ( do2d_at_begin ) THEN
772	begin_chr = 'and at the start'
773	ELSE
774	begin_chr = ''
775	ENDIF
776
777	output_format = ''
778	IF ( netcdf_output ) THEN
779	IF ( netcdf_64bit ) THEN
780	output_format = 'netcdf (64 bit offset)'
781	ELSE
782	output_format = 'netcdf'
783	ENDIF
784	ENDIF
785	IF ( iso2d_output ) THEN
786	IF ( netcdf_output ) THEN
787	output_format = TRIM( output_format ) // ' and iso2d'
788	ELSE
789	output_format = 'iso2d'
790	ENDIF
791	ENDIF
792	WRITE ( io, 344 ) output_format
793
794	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
795	i = 1
796	slices = '/'
797	coordinates = '/'
798	!
799	!-- Building strings with index and coordinate informations of the
800	!-- slices
801	DO WHILE ( section(i,1) /= -9999 )
802
803	WRITE (section_chr,'(I5)') section(i,1)
804	section_chr = ADJUSTL( section_chr )
805	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
806
807	IF ( section(i,1) == -1 ) THEN
808	WRITE (coor_chr,'(F10.1)') -1.0
809	ELSE
810	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
811	ENDIF
812	coor_chr = ADJUSTL( coor_chr )
813	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
814
815	i = i + 1
816	ENDDO
817	IF ( av == 0 ) THEN
818	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
819	TRIM( begin_chr ), 'k', TRIM( slices ), &
820	TRIM( coordinates )
821	IF ( skip_time_do2d_xy /= 0.0 ) THEN
822	WRITE ( io, 339 ) skip_time_do2d_xy
823	ENDIF
824	ELSE
825	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
826	TRIM( begin_chr ), averaging_interval, &
827	dt_averaging_input, 'k', TRIM( slices ), &
828	TRIM( coordinates )
829	IF ( skip_time_data_output_av /= 0.0 ) THEN
830	WRITE ( io, 339 ) skip_time_data_output_av
831	ENDIF
832	ENDIF
833
834	ENDIF
835
836	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
837	i = 1
838	slices = '/'
839	coordinates = '/'
840	!
841	!-- Building strings with index and coordinate informations of the
842	!-- slices
843	DO WHILE ( section(i,2) /= -9999 )
844
845	WRITE (section_chr,'(I5)') section(i,2)
846	section_chr = ADJUSTL( section_chr )
847	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
848
849	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
850	coor_chr = ADJUSTL( coor_chr )
851	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
852
853	i = i + 1
854	ENDDO
855	IF ( av == 0 ) THEN
856	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
857	TRIM( begin_chr ), 'j', TRIM( slices ), &
858	TRIM( coordinates )
859	IF ( skip_time_do2d_xz /= 0.0 ) THEN
860	WRITE ( io, 339 ) skip_time_do2d_xz
861	ENDIF
862	ELSE
863	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
864	TRIM( begin_chr ), averaging_interval, &
865	dt_averaging_input, 'j', TRIM( slices ), &
866	TRIM( coordinates )
867	IF ( skip_time_data_output_av /= 0.0 ) THEN
868	WRITE ( io, 339 ) skip_time_data_output_av
869	ENDIF
870	ENDIF
871	ENDIF
872
873	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
874	i = 1
875	slices = '/'
876	coordinates = '/'
877	!
878	!-- Building strings with index and coordinate informations of the
879	!-- slices
880	DO WHILE ( section(i,3) /= -9999 )
881
882	WRITE (section_chr,'(I5)') section(i,3)
883	section_chr = ADJUSTL( section_chr )
884	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
885
886	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
887	coor_chr = ADJUSTL( coor_chr )
888	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
889
890	i = i + 1
891	ENDDO
892	IF ( av == 0 ) THEN
893	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
894	TRIM( begin_chr ), 'i', TRIM( slices ), &
895	TRIM( coordinates )
896	IF ( skip_time_do2d_yz /= 0.0 ) THEN
897	WRITE ( io, 339 ) skip_time_do2d_yz
898	ENDIF
899	ELSE
900	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
901	TRIM( begin_chr ), averaging_interval, &
902	dt_averaging_input, 'i', TRIM( slices ), &
903	TRIM( coordinates )
904	IF ( skip_time_data_output_av /= 0.0 ) THEN
905	WRITE ( io, 339 ) skip_time_data_output_av
906	ENDIF
907	ENDIF
908	ENDIF
909
910	ENDIF
911
912	ENDDO
913
914	!
915	!-- 3d-arrays
916	DO av = 0, 1
917
918	i = 1
919	do3d_chr = ''
920	DO WHILE ( do3d(av,i) /= ' ' )
921
922	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
923	i = i + 1
924
925	ENDDO
926
927	IF ( do3d_chr /= '' ) THEN
928	IF ( av == 0 ) THEN
929	WRITE ( io, 336 ) ''
930	ELSE
931	WRITE ( io, 336 ) '(time-averaged)'
932	ENDIF
933
934	output_format = ''
935	IF ( netcdf_output ) THEN
936	IF ( netcdf_64bit_3d ) THEN
937	output_format = 'netcdf (64 bit offset)'
938	ELSE
939	output_format = 'netcdf'
940	ENDIF
941	ENDIF
942	IF ( avs_output ) THEN
943	IF ( netcdf_output ) THEN
944	output_format = TRIM( output_format ) // ' and avs'
945	ELSE
946	output_format = 'avs'
947	ENDIF
948	ENDIF
949	WRITE ( io, 344 ) output_format
950
951	IF ( do3d_at_begin ) THEN
952	begin_chr = 'and at the start'
953	ELSE
954	begin_chr = ''
955	ENDIF
956	IF ( av == 0 ) THEN
957	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
958	zu(nz_do3d), nz_do3d
959	ELSE
960	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
961	TRIM( begin_chr ), averaging_interval, &
962	dt_averaging_input, zu(nz_do3d), nz_do3d
963	ENDIF
964
965	IF ( do3d_compress ) THEN
966	do3d_chr = ''
967	i = 1
968	DO WHILE ( do3d(av,i) /= ' ' )
969
970	SELECT CASE ( do3d(av,i) )
971	CASE ( 'u' )
972	j = 1
973	CASE ( 'v' )
974	j = 2
975	CASE ( 'w' )
976	j = 3
977	CASE ( 'p' )
978	j = 4
979	CASE ( 'pt' )
980	j = 5
981	END SELECT
982	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
983	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
984	':' // prec // ','
985	i = i + 1
986
987	ENDDO
988	WRITE ( io, 338 ) do3d_chr
989
990	ENDIF
991
992	IF ( av == 0 ) THEN
993	IF ( skip_time_do3d /= 0.0 ) THEN
994	WRITE ( io, 339 ) skip_time_do3d
995	ENDIF
996	ELSE
997	IF ( skip_time_data_output_av /= 0.0 ) THEN
998	WRITE ( io, 339 ) skip_time_data_output_av
999	ENDIF
1000	ENDIF
1001
1002	ENDIF
1003
1004	ENDDO
1005
1006	!
1007	!-- masked arrays
1008	IF ( masks > 0 ) WRITE ( io, 345 ) &
1009	mask_scale_x, mask_scale_y, mask_scale_z
1010	DO mid = 1, masks
1011	DO av = 0, 1
1012
1013	i = 1
1014	domask_chr = ''
1015	DO WHILE ( domask(mid,av,i) /= ' ' )
1016	domask_chr = TRIM( domask_chr ) // ' ' // &
1017	TRIM( domask(mid,av,i) ) // ','
1018	i = i + 1
1019	ENDDO
1020
1021	IF ( domask_chr /= '' ) THEN
1022	IF ( av == 0 ) THEN
1023	WRITE ( io, 346 ) '', mid
1024	ELSE
1025	WRITE ( io, 346 ) ' (time-averaged)', mid
1026	ENDIF
1027
1028	output_format = ''
1029	IF ( netcdf_output ) THEN
1030	SELECT CASE ( nc_format_mask(mid,av) )
1031	CASE ( 1 )
1032	output_format = 'netcdf (classic format)'
1033	CASE ( 2 )
1034	output_format = 'netcdf (64bit offset format)'
1035	CASE ( 3 )
1036	output_format = 'netcdf (NetCDF 4 format)'
1037	CASE ( 4 )
1038	output_format = 'netcdf (NetCDF 4 classic model format)'
1039	END SELECT
1040	ENDIF
1041	WRITE ( io, 344 ) output_format
1042
1043	IF ( av == 0 ) THEN
1044	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1045	ELSE
1046	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1047	averaging_interval, dt_averaging_input
1048	ENDIF
1049
1050	IF ( av == 0 ) THEN
1051	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1052	WRITE ( io, 339 ) skip_time_domask(mid)
1053	ENDIF
1054	ELSE
1055	IF ( skip_time_data_output_av /= 0.0 ) THEN
1056	WRITE ( io, 339 ) skip_time_data_output_av
1057	ENDIF
1058	ENDIF
1059	!
1060	!-- output locations
1061	DO dim = 1, 3
1062	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1063	count = 0
1064	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1065	count = count + 1
1066	ENDDO
1067	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1068	mask(mid,dim,:count)
1069	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1070	mask_loop(mid,dim,2) < 0.0 .AND. &
1071	mask_loop(mid,dim,3) == 0.0 ) THEN
1072	WRITE ( io, 350 ) dir(dim), dir(dim)
1073	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1074	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1075	mask_loop(mid,dim,1:2)
1076	ELSE
1077	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1078	mask_loop(mid,dim,1:3)
1079	ENDIF
1080	ENDDO
1081	ENDIF
1082
1083	ENDDO
1084	ENDDO
1085
1086	!
1087	!-- Timeseries
1088	IF ( dt_dots /= 9999999.9 ) THEN
1089	WRITE ( io, 340 )
1090
1091	output_format = ''
1092	IF ( netcdf_output ) THEN
1093	IF ( netcdf_64bit ) THEN
1094	output_format = 'netcdf (64 bit offset)'
1095	ELSE
1096	output_format = 'netcdf'
1097	ENDIF
1098	ENDIF
1099	IF ( profil_output ) THEN
1100	IF ( netcdf_output ) THEN
1101	output_format = TRIM( output_format ) // ' and profil'
1102	ELSE
1103	output_format = 'profil'
1104	ENDIF
1105	ENDIF
1106	WRITE ( io, 344 ) output_format
1107	WRITE ( io, 341 ) dt_dots
1108	ENDIF
1109
1110	#if defined( __dvrp_graphics )
1111	!
1112	!-- Dvrp-output
1113	IF ( dt_dvrp /= 9999999.9 ) THEN
1114	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1115	TRIM( dvrp_username ), TRIM( dvrp_directory )
1116	i = 1
1117	l = 0
1118	m = 0
1119	DO WHILE ( mode_dvrp(i) /= ' ' )
1120	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1121	READ ( mode_dvrp(i), '(10X,I2)' ) j
1122	l = l + 1
1123	IF ( do3d(0,j) /= ' ' ) THEN
1124	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1125	isosurface_color(:,l)
1126	ENDIF
1127	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1128	READ ( mode_dvrp(i), '(6X,I2)' ) j
1129	m = m + 1
1130	IF ( do2d(0,j) /= ' ' ) THEN
1131	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1132	slicer_range_limits_dvrp(:,m)
1133	ENDIF
1134	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1135	WRITE ( io, 363 ) dvrp_psize
1136	IF ( particle_dvrpsize /= 'none' ) THEN
1137	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1138	dvrpsize_interval
1139	ENDIF
1140	IF ( particle_color /= 'none' ) THEN
1141	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1142	color_interval
1143	ENDIF
1144	ENDIF
1145	i = i + 1
1146	ENDDO
1147
1148	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1149	superelevation_y, superelevation, clip_dvrp_l, &
1150	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1151
1152	IF ( TRIM( topography ) /= 'flat' ) THEN
1153	WRITE ( io, 366 ) topography_color
1154	IF ( cluster_size > 1 ) THEN
1155	WRITE ( io, 367 ) cluster_size
1156	ENDIF
1157	ENDIF
1158
1159	ENDIF
1160	#endif
1161
1162	#if defined( __spectra )
1163	!
1164	!-- Spectra output
1165	IF ( dt_dosp /= 9999999.9 ) THEN
1166	WRITE ( io, 370 )
1167
1168	output_format = ''
1169	IF ( netcdf_output ) THEN
1170	IF ( netcdf_64bit ) THEN
1171	output_format = 'netcdf (64 bit offset)'
1172	ELSE
1173	output_format = 'netcdf'
1174	ENDIF
1175	ENDIF
1176	IF ( profil_output ) THEN
1177	IF ( netcdf_output ) THEN
1178	output_format = TRIM( output_format ) // ' and profil'
1179	ELSE
1180	output_format = 'profil'
1181	ENDIF
1182	ENDIF
1183	WRITE ( io, 344 ) output_format
1184	WRITE ( io, 371 ) dt_dosp
1185	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1186	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1187	( spectra_direction(i), i = 1,10 ), &
1188	( comp_spectra_level(i), i = 1,100 ), &
1189	( plot_spectra_level(i), i = 1,100 ), &
1190	averaging_interval_sp, dt_averaging_input_pr
1191	ENDIF
1192	#endif
1193
1194	WRITE ( io, 99 )
1195
1196	!
1197	!-- Physical quantities
1198	WRITE ( io, 400 )
1199
1200	!
1201	!-- Geostrophic parameters
1202	WRITE ( io, 410 ) omega, phi, f, fs
1203
1204	!
1205	!-- Other quantities
1206	WRITE ( io, 411 ) g
1207	IF ( use_reference ) THEN
1208	IF ( ocean ) THEN
1209	WRITE ( io, 412 ) prho_reference
1210	ELSE
1211	WRITE ( io, 413 ) pt_reference
1212	ENDIF
1213	ENDIF
1214
1215	!
1216	!-- Cloud physics parameters
1217	IF ( cloud_physics ) THEN
1218	WRITE ( io, 415 )
1219	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1220	ENDIF
1221
1222	!-- Profile of the geostrophic wind (component ug)
1223	!-- Building output strings
1224	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1225	gradients = '------'
1226	slices = ' 0'
1227	coordinates = ' 0.0'
1228	i = 1
1229	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1230
1231	print*, 'i=',i,' level_u=',ug_vertical_gradient_level_ind(i)
1232	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1233	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1234
1235	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1236	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1237
1238	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1239	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1240
1241	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1242	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1243
1244	IF ( i == 10 ) THEN
1245	EXIT
1246	ELSE
1247	i = i + 1
1248	ENDIF
1249
1250	ENDDO
1251
1252	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1253	TRIM( gradients ), TRIM( slices )
1254
1255	!-- Profile of the geostrophic wind (component vg)
1256	!-- Building output strings
1257	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1258	gradients = '------'
1259	slices = ' 0'
1260	coordinates = ' 0.0'
1261	i = 1
1262	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1263
1264	print*, 'i=',i,' level_v=',vg_vertical_gradient_level_ind(i)
1265	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1266	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1267
1268	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1269	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1270
1271	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1272	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1273
1274	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1275	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1276
1277	IF ( i == 10 ) THEN
1278	EXIT
1279	ELSE
1280	i = i + 1
1281	ENDIF
1282
1283	ENDDO
1284
1285	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1286	TRIM( gradients ), TRIM( slices )
1287
1288	!
1289	!-- Initial temperature profile
1290	!-- Building output strings, starting with surface temperature
1291	WRITE ( temperatures, '(F6.2)' ) pt_surface
1292	gradients = '------'
1293	slices = ' 0'
1294	coordinates = ' 0.0'
1295	i = 1
1296	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1297
1298	print*, 'i=',i,' level_pt=',pt_vertical_gradient_level_ind(i)
1299	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1300	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1301
1302	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1303	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1304
1305	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1306	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1307
1308	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1309	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1310
1311	IF ( i == 10 ) THEN
1312	EXIT
1313	ELSE
1314	i = i + 1
1315	ENDIF
1316
1317	ENDDO
1318
1319	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1320	TRIM( gradients ), TRIM( slices )
1321
1322	!
1323	!-- Initial humidity profile
1324	!-- Building output strings, starting with surface humidity
1325	IF ( humidity .OR. passive_scalar ) THEN
1326	WRITE ( temperatures, '(E8.1)' ) q_surface
1327	gradients = '--------'
1328	slices = ' 0'
1329	coordinates = ' 0.0'
1330	i = 1
1331	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1332
1333	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1334	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1335
1336	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1337	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1338
1339	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1340	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1341
1342	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1343	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1344
1345	IF ( i == 10 ) THEN
1346	EXIT
1347	ELSE
1348	i = i + 1
1349	ENDIF
1350
1351	ENDDO
1352
1353	IF ( humidity ) THEN
1354	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1355	TRIM( gradients ), TRIM( slices )
1356	ELSE
1357	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1358	TRIM( gradients ), TRIM( slices )
1359	ENDIF
1360	ENDIF
1361
1362	!
1363	!-- Initial salinity profile
1364	!-- Building output strings, starting with surface salinity
1365	IF ( ocean ) THEN
1366	WRITE ( temperatures, '(F6.2)' ) sa_surface
1367	gradients = '------'
1368	slices = ' 0'
1369	coordinates = ' 0.0'
1370	i = 1
1371	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1372
1373	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1374	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1375
1376	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1377	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1378
1379	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1380	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1381
1382	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1383	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1384
1385	IF ( i == 10 ) THEN
1386	EXIT
1387	ELSE
1388	i = i + 1
1389	ENDIF
1390
1391	ENDDO
1392
1393	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1394	TRIM( gradients ), TRIM( slices )
1395	ENDIF
1396
1397	!
1398	!-- Profile for the large scale vertial velocity
1399	!-- Building output strings, starting with surface value
1400	IF ( large_scale_subsidence ) THEN
1401	temperatures = ' 0.0'
1402	gradients = '------'
1403	slices = ' 0'
1404	coordinates = ' 0.0'
1405	i = 1
1406	DO WHILE ( ws_vertical_gradient_level_ind(i) /= -9999 )
1407
1408	WRITE (coor_chr,'(E10.2,7X)') &
1409	w_subs(ws_vertical_gradient_level_ind(i))
1410	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1411
1412	WRITE (coor_chr,'(E10.2,7X)') ws_vertical_gradient(i)
1413	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1414
1415	WRITE (coor_chr,'(I10,7X)') ws_vertical_gradient_level_ind(i)
1416	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1417
1418	WRITE (coor_chr,'(F10.2,7X)') ws_vertical_gradient_level(i)
1419	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1420
1421	IF ( i == 10 ) THEN
1422	EXIT
1423	ELSE
1424	i = i + 1
1425	ENDIF
1426
1427	ENDDO
1428
1429	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1430	TRIM( gradients ), TRIM( slices )
1431	ENDIF
1432
1433	!
1434	!-- LES / turbulence parameters
1435	WRITE ( io, 450 )
1436
1437	!--
1438	! ... LES-constants used must still be added here
1439	!--
1440	IF ( constant_diffusion ) THEN
1441	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1442	prandtl_number
1443	ENDIF
1444	IF ( .NOT. constant_diffusion) THEN
1445	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1446	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1447	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1448	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1449	ENDIF
1450
1451	!
1452	!-- Special actions during the run
1453	WRITE ( io, 470 )
1454	IF ( create_disturbances ) THEN
1455	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1456	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1457	zu(disturbance_level_ind_t), disturbance_level_ind_t
1458	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1459	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1460	ELSE
1461	WRITE ( io, 473 ) disturbance_energy_limit
1462	ENDIF
1463	WRITE ( io, 474 ) TRIM( random_generator )
1464	ENDIF
1465	IF ( pt_surface_initial_change /= 0.0 ) THEN
1466	WRITE ( io, 475 ) pt_surface_initial_change
1467	ENDIF
1468	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1469	WRITE ( io, 476 ) q_surface_initial_change
1470	ENDIF
1471	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1472	WRITE ( io, 477 ) q_surface_initial_change
1473	ENDIF
1474
1475	IF ( particle_advection ) THEN
1476	!
1477	!-- Particle attributes
1478	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1479	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1480	end_time_prel, dt_sort_particles
1481	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1482	IF ( random_start_position ) WRITE ( io, 481 )
1483	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1484	WRITE ( io, 495 ) total_number_of_particles
1485	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1486	WRITE ( io, 483 ) maximum_number_of_tailpoints
1487	IF ( minimum_tailpoint_distance /= 0 ) THEN
1488	WRITE ( io, 484 ) total_number_of_tails, &
1489	minimum_tailpoint_distance, &
1490	maximum_tailpoint_age
1491	ENDIF
1492	ENDIF
1493	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1494	WRITE ( io, 485 ) dt_write_particle_data
1495	output_format = ''
1496	IF ( netcdf_output ) THEN
1497	IF ( netcdf_64bit ) THEN
1498	output_format = 'netcdf (64 bit offset) and binary'
1499	ELSE
1500	output_format = 'netcdf and binary'
1501	ENDIF
1502	ELSE
1503	output_format = 'binary'
1504	ENDIF
1505	WRITE ( io, 344 ) output_format
1506	ENDIF
1507	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1508	IF ( write_particle_statistics ) WRITE ( io, 486 )
1509
1510	WRITE ( io, 487 ) number_of_particle_groups
1511
1512	DO i = 1, number_of_particle_groups
1513	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1514	WRITE ( io, 490 ) i, 0.0
1515	WRITE ( io, 492 )
1516	ELSE
1517	WRITE ( io, 490 ) i, radius(i)
1518	IF ( density_ratio(i) /= 0.0 ) THEN
1519	WRITE ( io, 491 ) density_ratio(i)
1520	ELSE
1521	WRITE ( io, 492 )
1522	ENDIF
1523	ENDIF
1524	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1525	pdx(i), pdy(i), pdz(i)
1526	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1527	ENDDO
1528
1529	ENDIF
1530
1531
1532	!
1533	!-- Parameters of 1D-model
1534	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1535	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1536	mixing_length_1d, dissipation_1d
1537	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1538	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1539	ENDIF
1540	ENDIF
1541
1542	!
1543	!-- User-defined informations
1544	CALL user_header( io )
1545
1546	WRITE ( io, 99 )
1547
1548	!
1549	!-- Write buffer contents to disc immediately
1550	CALL local_flush( io )
1551
1552	!
1553	!-- Here the FORMATs start
1554
1555	99 FORMAT (1X,78('-'))
1556	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1557	1X,'* ',A,' *',9X,A/ &
1558	1X,'***************************',9X,42('-'))
1559	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1560	37X,42('-'))
1561	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1562	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1563	' Run on host: ',A10)
1564	#if defined( __parallel )
1565	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1566	')',1X,A)
1567	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1568	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1569	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1570	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1571	37X,'because the job is running on an SMP-cluster')
1572	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1573	#endif
1574	110 FORMAT (/' Numerical Schemes:'/ &
1575	' -----------------'/)
1576	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1577	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1578	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1579	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1580	' or Upstream')
1581	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1582	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1583	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1584	' or Upstream')
1585	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1586	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1587	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1588	' Translation velocity = ',A/ &
1589	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1590	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1591	' of timestep changes)')
1592	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1593	' timestep changes')
1594	122 FORMAT (' --> Time differencing scheme: ',A)
1595	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1596	' maximum damping coefficient: ',F5.3, ' 1/s')
1597	124 FORMAT (' Spline-overshoots are being suppressed')
1598	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1599	' of'/ &
1600	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1601	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1602	' of'/ &
1603	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1604	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1605	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1606	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1607	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1608	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1609	130 FORMAT (' --> Additional prognostic equation for the total water content')
1610	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1611	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1612	' effective emissivity scheme')
1613	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1614	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1615	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1616	A,'-cycle)'/ &
1617	' number of grid levels: ',I2/ &
1618	' Gauss-Seidel red/black iterations: ',I2)
1619	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1620	I3,')')
1621	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1622	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1623	I3,')'/ &
1624	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1625	I3,')')
1626	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1627	139 FORMAT (' --> Loop optimization method: ',A)
1628	140 FORMAT (' maximum residual allowed: ',E10.3)
1629	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1630	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1631	'step')
1632	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1633	'kinetic energy')
1634	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1635	'conserved'/ &
1636	' using the ',A,' mode')
1637	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1638	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1639	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1640	/' starting from dp_level_b =', F8.3, 'm', A /)
1641	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1642	'prognostic equation for')
1643	154 FORMAT (' the potential temperature')
1644	200 FORMAT (//' Run time and time step information:'/ &
1645	' ----------------------------------'/)
1646	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1647	' CFL-factor: ',F4.2)
1648	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1649	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1650	' End time: ',F9.3,' s')
1651	204 FORMAT ( A,F9.3,' s')
1652	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1653	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1654	' CPU-time used: ',F9.3,' s per timestep: ', &
1655	' ',F9.3,' s'/ &
1656	' per second of simulated tim', &
1657	'e: ',F9.3,' s')
1658	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1659	250 FORMAT (//' Computational grid and domain size:'/ &
1660	' ----------------------------------'// &
1661	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1662	' m dz = ',F7.3,' m'/ &
1663	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1664	' m z(u) = ',F10.3,' m'/)
1665	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1666	' factor: ',F5.3/ &
1667	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1668	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1669	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1670	255 FORMAT (' Subdomains have equal size')
1671	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1672	'have smaller sizes'/ &
1673	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1674	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1675	' degrees')
1676	270 FORMAT (//' Topography informations:'/ &
1677	' -----------------------'// &
1678	1X,'Topography: ',A)
1679	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1680	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1681	' / ',I4)
1682	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1683	' direction' / &
1684	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1685	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1686	278 FORMAT (' Topography grid definition convention:'/ &
1687	' cell edge (staggered grid points'/ &
1688	' (u in x-direction, v in y-direction))' /)
1689	279 FORMAT (' Topography grid definition convention:'/ &
1690	' cell center (scalar grid points)' /)
1691	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1692	' ------------------------------'// &
1693	' Canopy mode: ', A / &
1694	' Canopy top: ',I4 / &
1695	' Leaf drag coefficient: ',F6.2 /)
1696	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1697	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1698	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1699	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1700	' Height: ',A,' m'/ &
1701	' Leaf area density: ',A,' m2/m3'/ &
1702	' Gradient: ',A,' m2/m4'/ &
1703	' Gridpoint: ',A)
1704
1705	300 FORMAT (//' Boundary conditions:'/ &
1706	' -------------------'// &
1707	' p uv ', &
1708	' pt'// &
1709	' B. bound.: ',A/ &
1710	' T. bound.: ',A)
1711	301 FORMAT (/' ',A// &
1712	' B. bound.: ',A/ &
1713	' T. bound.: ',A)
1714	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1715	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1716	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1717	'computational u,v-level:'// &
1718	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1719	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1720	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1721	307 FORMAT (' Heatflux has a random normal distribution')
1722	308 FORMAT (' Predefined surface temperature')
1723	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1724	310 FORMAT (//' 1D-Model:'// &
1725	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1726	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1727	312 FORMAT (' Predefined surface humidity')
1728	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1729	314 FORMAT (' Predefined scalar value at the surface')
1730	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1731	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1732	'atmosphere model')
1733	317 FORMAT (//' Lateral boundaries:'/ &
1734	' left/right: ',A/ &
1735	' north/south: ',A)
1736	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1737	'max =',F5.1,' m**2/s')
1738	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1739	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1740	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1741	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1742	' v: ',F9.6,' m2/s2')
1743	325 FORMAT (//' List output:'/ &
1744	' -----------'// &
1745	' 1D-Profiles:'/ &
1746	' Output every ',F8.2,' s')
1747	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1748	' Averaging input every ',F8.2,' s')
1749	330 FORMAT (//' Data output:'/ &
1750	' -----------'/)
1751	331 FORMAT (/' 1D-Profiles:')
1752	332 FORMAT (/' ',A)
1753	333 FORMAT (' Output every ',F8.2,' s',/ &
1754	' Time averaged over ',F8.2,' s'/ &
1755	' Averaging input every ',F8.2,' s')
1756	334 FORMAT (/' 2D-Arrays',A,':')
1757	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1758	' Output every ',F8.2,' s ',A/ &
1759	' Cross sections at ',A1,' = ',A/ &
1760	' scalar-coordinates: ',A,' m'/)
1761	336 FORMAT (/' 3D-Arrays',A,':')
1762	337 FORMAT (/' Arrays: ',A/ &
1763	' Output every ',F8.2,' s ',A/ &
1764	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1765	338 FORMAT (' Compressed data output'/ &
1766	' Decimal precision: ',A/)
1767	339 FORMAT (' No output during initial ',F8.2,' s')
1768	340 FORMAT (/' Time series:')
1769	341 FORMAT (' Output every ',F8.2,' s'/)
1770	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1771	' Output every ',F8.2,' s ',A/ &
1772	' Time averaged over ',F8.2,' s'/ &
1773	' Averaging input every ',F8.2,' s'/ &
1774	' Cross sections at ',A1,' = ',A/ &
1775	' scalar-coordinates: ',A,' m'/)
1776	343 FORMAT (/' Arrays: ',A/ &
1777	' Output every ',F8.2,' s ',A/ &
1778	' Time averaged over ',F8.2,' s'/ &
1779	' Averaging input every ',F8.2,' s'/ &
1780	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1781	344 FORMAT (' Output format: ',A/)
1782	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1783	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1784	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1785	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1786	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1787	347 FORMAT (' Variables: ',A/ &
1788	' Output every ',F8.2,' s')
1789	348 FORMAT (' Variables: ',A/ &
1790	' Output every ',F8.2,' s'/ &
1791	' Time averaged over ',F8.2,' s'/ &
1792	' Averaging input every ',F8.2,' s')
1793	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1794	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1795	13(' ',8(F8.2,',')/) )
1796	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1797	'all gridpoints along ',A,'-direction (default).' )
1798	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1799	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1800	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1801	#if defined( __dvrp_graphics )
1802	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1803	' Output every ',F7.1,' s'/ &
1804	' Output mode: ',A/ &
1805	' Host / User: ',A,' / ',A/ &
1806	' Directory: ',A// &
1807	' The sequence contains:')
1808	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1809	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1810	362 FORMAT (/' Slicer plane ',A/ &
1811	' Slicer limits: [',F6.2,',',F6.2,']')
1812	363 FORMAT (/' Particles'/ &
1813	' particle size: ',F7.2,' m')
1814	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1815	F6.2,',',F6.2,']')
1816	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1817	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1818	')'/ &
1819	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1820	' from y = ',F9.1,' m to y = ',F9.1,' m')
1821	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1822	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1823	#endif
1824	#if defined( __spectra )
1825	370 FORMAT (' Spectra:')
1826	371 FORMAT (' Output every ',F7.1,' s'/)
1827	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1828	' Directions: ', 10(A5,',')/ &
1829	' height levels k = ', 20(I3,',')/ &
1830	' ', 20(I3,',')/ &
1831	' ', 20(I3,',')/ &
1832	' ', 20(I3,',')/ &
1833	' ', 19(I3,','),I3,'.'/ &
1834	' height levels selected for standard plot:'/ &
1835	' k = ', 20(I3,',')/ &
1836	' ', 20(I3,',')/ &
1837	' ', 20(I3,',')/ &
1838	' ', 20(I3,',')/ &
1839	' ', 19(I3,','),I3,'.'/ &
1840	' Time averaged over ', F7.1, ' s,' / &
1841	' Profiles for the time averaging are taken every ', &
1842	F6.1,' s')
1843	#endif
1844	400 FORMAT (//' Physical quantities:'/ &
1845	' -------------------'/)
1846	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1847	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1848	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1849	' f* = ',F9.6,' 1/s')
1850	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1851	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1852	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1853	415 FORMAT (/' Cloud physics parameters:'/ &
1854	' ------------------------'/)
1855	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1856	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1857	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1858	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1859	' Vapourization heat : L_v = ',E8.2,' J/kg')
1860	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1861	' Height: ',A,' m'/ &
1862	' Temperature: ',A,' K'/ &
1863	' Gradient: ',A,' K/100m'/ &
1864	' Gridpoint: ',A)
1865	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1866	' Height: ',A,' m'/ &
1867	' Humidity: ',A,' kg/kg'/ &
1868	' Gradient: ',A,' (kg/kg)/100m'/ &
1869	' Gridpoint: ',A)
1870	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1871	' Height: ',A,' m'/ &
1872	' Scalar concentration: ',A,' kg/m**3'/ &
1873	' Gradient: ',A,' (kg/m**3)/100m'/ &
1874	' Gridpoint: ',A)
1875	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1876	' Height: ',A,' m'/ &
1877	' ug: ',A,' m/s'/ &
1878	' Gradient: ',A,' 1/100s'/ &
1879	' Gridpoint: ',A)
1880	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1881	' Height: ',A,' m'/ &
1882	' vg: ',A,' m/s'/ &
1883	' Gradient: ',A,' 1/100s'/ &
1884	' Gridpoint: ',A)
1885	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1886	' Height: ',A,' m'/ &
1887	' Salinity: ',A,' psu'/ &
1888	' Gradient: ',A,' psu/100m'/ &
1889	' Gridpoint: ',A)
1890	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1891	' Height: ',A,' m'/ &
1892	' w_subs: ',A,' m/s'/ &
1893	' Gradient: ',A,' (m/s)/100m'/ &
1894	' Gridpoint: ',A)
1895	450 FORMAT (//' LES / Turbulence quantities:'/ &
1896	' ---------------------------'/)
1897	451 FORMAT (' Diffusion coefficients are constant:'/ &
1898	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1899	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1900	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1901	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1902	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1903	470 FORMAT (//' Actions during the simulation:'/ &
1904	' -----------------------------'/)
1905	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1906	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1907	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1908	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1909	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1910	' to i/j =',I4)
1911	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1912	1X,F5.3, ' m2/s2')
1913	474 FORMAT (' Random number generator used : ',A/)
1914	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1915	'respectively, if'/ &
1916	' the value is negative) by ',F5.2,' K at the beginning of the',&
1917	' 3D-simulation'/)
1918	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1919	'respectively, if the'/ &
1920	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1921	' the 3D-simulation'/)
1922	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1923	'respectively, if the'/ &
1924	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1925	' the 3D-simulation'/)
1926	480 FORMAT (' Particles:'/ &
1927	' ---------'// &
1928	' Particle advection is active (switched on at t = ', F7.1, &
1929	' s)'/ &
1930	' Start of new particle generations every ',F6.1,' s'/ &
1931	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1932	' bottom: ', A, ' top: ', A/&
1933	' Maximum particle age: ',F9.1,' s'/ &
1934	' Advection stopped at t = ',F9.1,' s'/ &
1935	' Particles are sorted every ',F9.1,' s'/)
1936	481 FORMAT (' Particles have random start positions'/)
1937	482 FORMAT (' Particles are advected only horizontally'/)
1938	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1939	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1940	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1941	' Maximum age of the end of the tail: ',F8.2,' s')
1942	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1943	486 FORMAT (' Particle statistics are written on file'/)
1944	487 FORMAT (' Number of particle groups: ',I2/)
1945	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1946	' minimum timestep for advection: ', F7.5/)
1947	489 FORMAT (' Number of particles simultaneously released at each ', &
1948	'point: ', I5/)
1949	490 FORMAT (' Particle group ',I2,':'/ &
1950	' Particle radius: ',E10.3, 'm')
1951	491 FORMAT (' Particle inertia is activated'/ &
1952	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1953	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1954	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1955	' y:',F8.1,' - ',F8.1,' m'/&
1956	' z:',F8.1,' - ',F8.1,' m'/&
1957	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1958	' m dz = ',F8.1,' m'/)
1959	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1960	F8.2,' s'/)
1961	495 FORMAT (' Number of particles in total domain: ',I10/)
1962	500 FORMAT (//' 1D-Model parameters:'/ &
1963	' -------------------'// &
1964	' Simulation time: ',F8.1,' s'/ &
1965	' Run-controll output every: ',F8.1,' s'/ &
1966	' Vertical profile output every: ',F8.1,' s'/ &
1967	' Mixing length calculation: ',A/ &
1968	' Dissipation calculation: ',A/)
1969	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1970
1971
1972	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |