Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 416

Last change on this file since 416 was 411, checked in by heinze, 15 years ago
Large scale vertical motion (subsidence/ascent) can be applied to the prognostic equation for the potential temperature
Property svn:keywords set to `Id`
File size: 75.2 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! +large scale vertical motion (subsidence/ascent)
7	!
8	!
9	! Branch revisions:
10	! -----------------
11	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
12	! mask_scale\|_x\|y\|z, masks, netcdf_format_mask[_av], skip_time_domask
13	!
14	! Former revisions:
15	! -----------------
16	! $Id: header.f90 411 2009-12-11 14:15:58Z weinreis $
17	!
18	! 346 2009-07-06 10:13:41Z raasch
19	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
20	! Coupling with independent precursor runs.
21	! Output of messages replaced by message handling routine.
22	! Output of several additional dvr parameters
23	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
24	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
25	! dp_smooth, dpdxy, u_bulk, v_bulk
26	! topography_grid_convention moved from user_header
27	! small bugfix concerning 3d 64bit netcdf output format
28	!
29	! 206 2008-10-13 14:59:11Z raasch
30	! Bugfix: error in zu index in case of section_xy = -1
31	!
32	! 198 2008-09-17 08:55:28Z raasch
33	! Format adjustments allowing output of larger revision numbers
34	!
35	! 197 2008-09-16 15:29:03Z raasch
36	! allow 100 spectra levels instead of 10 for consistency with
37	! define_netcdf_header,
38	! bugfix in the output of the characteristic levels of potential temperature,
39	! geostrophic wind, scalar concentration, humidity and leaf area density,
40	! output of turbulence recycling informations
41	!
42	! 138 2007-11-28 10:03:58Z letzel
43	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
44	! Allow two instead of one digit to specify isosurface and slicer variables.
45	! Output of sorting frequency of particles
46	!
47	! 108 2007-08-24 15:10:38Z letzel
48	! Output of informations for coupled model runs (boundary conditions etc.)
49	! + output of momentumfluxes at the top boundary
50	! Rayleigh damping for ocean, e_init
51	!
52	! 97 2007-06-21 08:23:15Z raasch
53	! Adjustments for the ocean version.
54	! use_pt_reference renamed use_reference
55	!
56	! 87 2007-05-22 15:46:47Z raasch
57	! Bugfix: output of use_upstream_for_tke
58	!
59	! 82 2007-04-16 15:40:52Z raasch
60	! Preprocessor strings for different linux clusters changed to "lc",
61	! routine local_flush is used for buffer flushing
62	!
63	! 76 2007-03-29 00:58:32Z raasch
64	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
65	! output of the loop optimization method, moisture renamed humidity,
66	! output of subversion revision number
67	!
68	! 19 2007-02-23 04:53:48Z raasch
69	! Output of scalar flux applied at top boundary
70	!
71	! RCS Log replace by Id keyword, revision history cleaned up
72	!
73	! Revision 1.63 2006/08/22 13:53:13 raasch
74	! Output of dz_max
75	!
76	! Revision 1.1 1997/08/11 06:17:20 raasch
77	! Initial revision
78	!
79	!
80	! Description:
81	! ------------
82	! Writing a header with all important informations about the actual run.
83	! This subroutine is called three times, two times at the beginning
84	! (writing information on files RUN_CONTROL and HEADER) and one time at the
85	! end of the run, then writing additional information about CPU-usage on file
86	! header.
87	!-----------------------------------------------------------------------------!
88
89	USE arrays_3d
90	USE control_parameters
91	USE cloud_parameters
92	USE cpulog
93	USE dvrp_variables
94	USE grid_variables
95	USE indices
96	USE model_1d
97	USE particle_attributes
98	USE pegrid
99	USE subsidence_mod
100	USE spectrum
101
102	IMPLICIT NONE
103
104	CHARACTER (LEN=1) :: prec
105	CHARACTER (LEN=2) :: do2d_mode
106	CHARACTER (LEN=5) :: section_chr
107	CHARACTER (LEN=9) :: time_to_string
108	CHARACTER (LEN=10) :: coor_chr, host_chr
109	CHARACTER (LEN=16) :: begin_chr
110	CHARACTER (LEN=23) :: ver_rev
111	CHARACTER (LEN=40) :: output_format
112	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
113	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
114	domask_chr, run_classification
115	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
116	temperatures, ugcomponent, vgcomponent
117	CHARACTER (LEN=85) :: roben, runten
118
119	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
120
121	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
122	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
123	REAL :: cpuseconds_per_simulated_second
124
125	!
126	!-- Open the output file. At the end of the simulation, output is directed
127	!-- to unit 19.
128	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
129	.NOT. simulated_time_at_begin /= simulated_time ) THEN
130	io = 15 ! header output on file RUN_CONTROL
131	ELSE
132	io = 19 ! header output on file HEADER
133	ENDIF
134	CALL check_open( io )
135
136	!
137	!-- At the end of the run, output file (HEADER) will be rewritten with
138	!-- new informations
139	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
140
141	!
142	!-- Determine kind of model run
143	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
144	run_classification = '3D - restart run'
145	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
146	run_classification = '3D - run with cyclic fill of 3D - prerun data'
147	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
148	run_classification = '3D - run without 1D - prerun'
149	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
150	run_classification = '3D - run with 1D - prerun'
151	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
152	run_classification = '3D - run initialized by user'
153	ELSE
154	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
155	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
156	ENDIF
157	IF ( ocean ) THEN
158	run_classification = 'ocean - ' // run_classification
159	ELSE
160	run_classification = 'atmosphere - ' // run_classification
161	ENDIF
162
163	!
164	!-- Run-identification, date, time, host
165	host_chr = host(1:10)
166	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
167	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
168	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
169	#if defined( __mpi2 )
170	mpi_type = 2
171	#else
172	mpi_type = 1
173	#endif
174	WRITE ( io, 101 ) mpi_type, coupling_mode
175	ENDIF
176	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
177	ADJUSTR( host_chr )
178	#if defined( __parallel )
179	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
180	char1 = 'calculated'
181	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
182	host(1:2) == 'lc' ) .AND. &
183	npex == -1 .AND. pdims(2) == 1 ) THEN
184	char1 = 'forced'
185	ELSE
186	char1 = 'predefined'
187	ENDIF
188	IF ( threads_per_task == 1 ) THEN
189	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
190	ELSE
191	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
192	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
193	ENDIF
194	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
195	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
196	npex == -1 .AND. pdims(2) == 1 ) &
197	THEN
198	WRITE ( io, 106 )
199	ELSEIF ( pdims(2) == 1 ) THEN
200	WRITE ( io, 107 ) 'x'
201	ELSEIF ( pdims(1) == 1 ) THEN
202	WRITE ( io, 107 ) 'y'
203	ENDIF
204	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
205	#endif
206	WRITE ( io, 99 )
207
208	!
209	!-- Numerical schemes
210	WRITE ( io, 110 )
211	IF ( psolver(1:7) == 'poisfft' ) THEN
212	WRITE ( io, 111 ) TRIM( fft_method )
213	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
214	ELSEIF ( psolver == 'sor' ) THEN
215	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
216	ELSEIF ( psolver == 'multigrid' ) THEN
217	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
218	IF ( mg_cycles == -1 ) THEN
219	WRITE ( io, 140 ) residual_limit
220	ELSE
221	WRITE ( io, 141 ) mg_cycles
222	ENDIF
223	IF ( mg_switch_to_pe0_level == 0 ) THEN
224	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
225	nzt_mg(1)
226	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
227	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
228	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
229	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
230	nzt_mg(mg_switch_to_pe0_level), &
231	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
232	nzt_mg(1)
233	ENDIF
234	ENDIF
235	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
236	THEN
237	WRITE ( io, 142 )
238	ENDIF
239
240	IF ( momentum_advec == 'pw-scheme' ) THEN
241	WRITE ( io, 113 )
242	ELSE
243	WRITE ( io, 114 )
244	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
245	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
246	overshoot_limit_w /= 0.0 ) THEN
247	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
248	overshoot_limit_w
249	ENDIF
250	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
251	ups_limit_w /= 0.0 ) &
252	THEN
253	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
254	ENDIF
255	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
256	ENDIF
257	IF ( scalar_advec == 'pw-scheme' ) THEN
258	WRITE ( io, 116 )
259	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
260	WRITE ( io, 117 )
261	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
262	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
263	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
264	ENDIF
265	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
266	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
267	ENDIF
268	ELSE
269	WRITE ( io, 118 )
270	ENDIF
271
272	WRITE ( io, 139 ) TRIM( loop_optimization )
273
274	IF ( galilei_transformation ) THEN
275	IF ( use_ug_for_galilei_tr ) THEN
276	char1 = 'geostrophic wind'
277	ELSE
278	char1 = 'mean wind in model domain'
279	ENDIF
280	IF ( simulated_time_at_begin == simulated_time ) THEN
281	char2 = 'at the start of the run'
282	ELSE
283	char2 = 'at the end of the run'
284	ENDIF
285	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
286	advected_distance_x/1000.0, advected_distance_y/1000.0
287	ENDIF
288	IF ( timestep_scheme == 'leapfrog' ) THEN
289	WRITE ( io, 120 )
290	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
291	WRITE ( io, 121 )
292	ELSE
293	WRITE ( io, 122 ) timestep_scheme
294	ENDIF
295	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
296	IF ( rayleigh_damping_factor /= 0.0 ) THEN
297	IF ( .NOT. ocean ) THEN
298	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
299	rayleigh_damping_factor
300	ELSE
301	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
302	rayleigh_damping_factor
303	ENDIF
304	ENDIF
305	IF ( humidity ) THEN
306	IF ( .NOT. cloud_physics ) THEN
307	WRITE ( io, 129 )
308	ELSE
309	WRITE ( io, 130 )
310	WRITE ( io, 131 )
311	IF ( radiation ) WRITE ( io, 132 )
312	IF ( precipitation ) WRITE ( io, 133 )
313	ENDIF
314	ENDIF
315	IF ( passive_scalar ) WRITE ( io, 134 )
316	IF ( conserve_volume_flow ) THEN
317	WRITE ( io, 150 ) conserve_volume_flow_mode
318	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
319	WRITE ( io, 151 ) u_bulk, v_bulk
320	ENDIF
321	ELSEIF ( dp_external ) THEN
322	IF ( dp_smooth ) THEN
323	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
324	ELSE
325	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
326	ENDIF
327	ENDIF
328	IF ( large_scale_subsidence ) THEN
329	WRITE ( io, 153 )
330	WRITE ( io, 154 )
331	ENDIF
332	WRITE ( io, 99 )
333
334	!
335	!-- Runtime and timestep informations
336	WRITE ( io, 200 )
337	IF ( .NOT. dt_fixed ) THEN
338	WRITE ( io, 201 ) dt_max, cfl_factor
339	ELSE
340	WRITE ( io, 202 ) dt
341	ENDIF
342	WRITE ( io, 203 ) simulated_time_at_begin, end_time
343
344	IF ( time_restart /= 9999999.9 .AND. &
345	simulated_time_at_begin == simulated_time ) THEN
346	IF ( dt_restart == 9999999.9 ) THEN
347	WRITE ( io, 204 ) ' Restart at: ',time_restart
348	ELSE
349	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
350	ENDIF
351	ENDIF
352
353	IF ( simulated_time_at_begin /= simulated_time ) THEN
354	i = MAX ( log_point_s(10)%counts, 1 )
355	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
356	cpuseconds_per_simulated_second = 0.0
357	ELSE
358	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
359	( simulated_time - &
360	simulated_time_at_begin )
361	ENDIF
362	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
363	log_point_s(10)%sum / REAL( i ), &
364	cpuseconds_per_simulated_second
365	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
366	IF ( dt_restart == 9999999.9 ) THEN
367	WRITE ( io, 204 ) ' Next restart at: ',time_restart
368	ELSE
369	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
370	ENDIF
371	ENDIF
372	ENDIF
373
374	!
375	!-- Start time for coupled runs, if independent precursor runs for atmosphere
376	!-- and ocean are used. In this case, coupling_start_time defines the time
377	!-- when the coupling is switched on.
378	IF ( coupling_start_time /= 0.0 ) THEN
379	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
380	char1 = 'Precursor run for a coupled atmosphere-ocean run'
381	ELSE
382	char1 = 'Coupled atmosphere-ocean run following independent ' // &
383	'precursor runs'
384	ENDIF
385	WRITE ( io, 207 ) char1, coupling_start_time
386	ENDIF
387
388	!
389	!-- Computational grid
390	IF ( .NOT. ocean ) THEN
391	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
392	IF ( dz_stretch_level_index < nzt+1 ) THEN
393	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
394	dz_stretch_factor, dz_max
395	ENDIF
396	ELSE
397	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
398	IF ( dz_stretch_level_index > 0 ) THEN
399	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
400	dz_stretch_factor, dz_max
401	ENDIF
402	ENDIF
403	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
404	MIN( nnz+2, nzt+2 )
405	IF ( numprocs > 1 ) THEN
406	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
407	WRITE ( io, 255 )
408	ELSE
409	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
410	ENDIF
411	ENDIF
412	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
413
414	!
415	!-- Topography
416	WRITE ( io, 270 ) topography
417	SELECT CASE ( TRIM( topography ) )
418
419	CASE ( 'flat' )
420	! no actions necessary
421
422	CASE ( 'single_building' )
423	blx = INT( building_length_x / dx )
424	bly = INT( building_length_y / dy )
425	bh = INT( building_height / dz )
426
427	IF ( building_wall_left == 9999999.9 ) THEN
428	building_wall_left = ( nx + 1 - blx ) / 2 * dx
429	ENDIF
430	bxl = INT ( building_wall_left / dx + 0.5 )
431	bxr = bxl + blx
432
433	IF ( building_wall_south == 9999999.9 ) THEN
434	building_wall_south = ( ny + 1 - bly ) / 2 * dy
435	ENDIF
436	bys = INT ( building_wall_south / dy + 0.5 )
437	byn = bys + bly
438
439	WRITE ( io, 271 ) building_length_x, building_length_y, &
440	building_height, bxl, bxr, bys, byn
441
442	CASE ( 'single_street_canyon' )
443	ch = NINT( canyon_height / dz )
444	IF ( canyon_width_x /= 9999999.9 ) THEN
445	!
446	!-- Street canyon in y direction
447	cwx = NINT( canyon_width_x / dx )
448	IF ( canyon_wall_left == 9999999.9 ) THEN
449	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
450	ENDIF
451	cxl = NINT( canyon_wall_left / dx )
452	cxr = cxl + cwx
453	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
454
455	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
456	!
457	!-- Street canyon in x direction
458	cwy = NINT( canyon_width_y / dy )
459	IF ( canyon_wall_south == 9999999.9 ) THEN
460	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
461	ENDIF
462	cys = NINT( canyon_wall_south / dy )
463	cyn = cys + cwy
464	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
465	ENDIF
466
467	END SELECT
468
469	IF ( TRIM( topography ) /= 'flat' ) THEN
470	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
471	IF ( TRIM( topography ) == 'single_building' .OR. &
472	TRIM( topography ) == 'single_street_canyon' ) THEN
473	WRITE ( io, 278 )
474	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
475	WRITE ( io, 279 )
476	ENDIF
477	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
478	WRITE ( io, 278 )
479	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
480	WRITE ( io, 279 )
481	ENDIF
482	ENDIF
483
484	IF ( plant_canopy ) THEN
485
486	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
487	IF ( passive_scalar ) THEN
488	WRITE ( io, 281 ) scalar_exchange_coefficient, &
489	leaf_surface_concentration
490	ENDIF
491
492	!
493	!-- Heat flux at the top of vegetation
494	WRITE ( io, 282 ) cthf
495
496	!
497	!-- Leaf area density profile
498	!-- Building output strings, starting with surface value
499	WRITE ( learde, '(F6.2)' ) lad_surface
500	gradients = '------'
501	slices = ' 0'
502	coordinates = ' 0.0'
503	i = 1
504	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
505
506	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
507	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
508
509	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
510	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
511
512	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
513	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
514
515	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
516	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
517
518	i = i + 1
519	ENDDO
520
521	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
522	TRIM( gradients ), TRIM( slices )
523
524	ENDIF
525
526	!
527	!-- Boundary conditions
528	IF ( ibc_p_b == 0 ) THEN
529	runten = 'p(0) = 0 \|'
530	ELSEIF ( ibc_p_b == 1 ) THEN
531	runten = 'p(0) = p(1) \|'
532	ELSE
533	runten = 'p(0) = p(1) +R\|'
534	ENDIF
535	IF ( ibc_p_t == 0 ) THEN
536	roben = 'p(nzt+1) = 0 \|'
537	ELSE
538	roben = 'p(nzt+1) = p(nzt) \|'
539	ENDIF
540
541	IF ( ibc_uv_b == 0 ) THEN
542	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
543	ELSE
544	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
545	ENDIF
546	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
547	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
548	ELSEIF ( ibc_uv_t == 0 ) THEN
549	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
550	ELSE
551	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
552	ENDIF
553
554	IF ( ibc_pt_b == 0 ) THEN
555	runten = TRIM( runten ) // ' pt(0) = pt_surface'
556	ELSEIF ( ibc_pt_b == 1 ) THEN
557	runten = TRIM( runten ) // ' pt(0) = pt(1)'
558	ELSEIF ( ibc_pt_b == 2 ) THEN
559	runten = TRIM( runten ) // ' pt(0) = from coupled model'
560	ENDIF
561	IF ( ibc_pt_t == 0 ) THEN
562	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
563	ELSEIF( ibc_pt_t == 1 ) THEN
564	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
565	ELSEIF( ibc_pt_t == 2 ) THEN
566	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
567	ENDIF
568
569	WRITE ( io, 300 ) runten, roben
570
571	IF ( .NOT. constant_diffusion ) THEN
572	IF ( ibc_e_b == 1 ) THEN
573	runten = 'e(0) = e(1)'
574	ELSE
575	runten = 'e(0) = e(1) = (u/0.1)*2'
576	ENDIF
577	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
578
579	WRITE ( io, 301 ) 'e', runten, roben
580
581	ENDIF
582
583	IF ( ocean ) THEN
584	runten = 'sa(0) = sa(1)'
585	IF ( ibc_sa_t == 0 ) THEN
586	roben = 'sa(nzt+1) = sa_surface'
587	ELSE
588	roben = 'sa(nzt+1) = sa(nzt)'
589	ENDIF
590	WRITE ( io, 301 ) 'sa', runten, roben
591	ENDIF
592
593	IF ( humidity ) THEN
594	IF ( ibc_q_b == 0 ) THEN
595	runten = 'q(0) = q_surface'
596	ELSE
597	runten = 'q(0) = q(1)'
598	ENDIF
599	IF ( ibc_q_t == 0 ) THEN
600	roben = 'q(nzt) = q_top'
601	ELSE
602	roben = 'q(nzt) = q(nzt-1) + dq/dz'
603	ENDIF
604	WRITE ( io, 301 ) 'q', runten, roben
605	ENDIF
606
607	IF ( passive_scalar ) THEN
608	IF ( ibc_q_b == 0 ) THEN
609	runten = 's(0) = s_surface'
610	ELSE
611	runten = 's(0) = s(1)'
612	ENDIF
613	IF ( ibc_q_t == 0 ) THEN
614	roben = 's(nzt) = s_top'
615	ELSE
616	roben = 's(nzt) = s(nzt-1) + ds/dz'
617	ENDIF
618	WRITE ( io, 301 ) 's', runten, roben
619	ENDIF
620
621	IF ( use_surface_fluxes ) THEN
622	WRITE ( io, 303 )
623	IF ( constant_heatflux ) THEN
624	WRITE ( io, 306 ) surface_heatflux
625	IF ( random_heatflux ) WRITE ( io, 307 )
626	ENDIF
627	IF ( humidity .AND. constant_waterflux ) THEN
628	WRITE ( io, 311 ) surface_waterflux
629	ENDIF
630	IF ( passive_scalar .AND. constant_waterflux ) THEN
631	WRITE ( io, 313 ) surface_waterflux
632	ENDIF
633	ENDIF
634
635	IF ( use_top_fluxes ) THEN
636	WRITE ( io, 304 )
637	IF ( coupling_mode == 'uncoupled' ) THEN
638	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
639	IF ( constant_top_heatflux ) THEN
640	WRITE ( io, 306 ) top_heatflux
641	ENDIF
642	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
643	WRITE ( io, 316 )
644	ENDIF
645	IF ( ocean .AND. constant_top_salinityflux ) THEN
646	WRITE ( io, 309 ) top_salinityflux
647	ENDIF
648	IF ( humidity .OR. passive_scalar ) THEN
649	WRITE ( io, 315 )
650	ENDIF
651	ENDIF
652
653	IF ( prandtl_layer ) THEN
654	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
655	rif_min, rif_max
656	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
657	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
658	WRITE ( io, 312 )
659	ENDIF
660	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
661	WRITE ( io, 314 )
662	ENDIF
663	ELSE
664	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
665	WRITE ( io, 310 ) rif_min, rif_max
666	ENDIF
667	ENDIF
668
669	WRITE ( io, 317 ) bc_lr, bc_ns
670	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
671	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
672	IF ( turbulent_inflow ) THEN
673	WRITE ( io, 319 ) recycling_width, recycling_plane, &
674	inflow_damping_height, inflow_damping_width
675	ENDIF
676	ENDIF
677
678	!
679	!-- Listing of 1D-profiles
680	WRITE ( io, 325 ) dt_dopr_listing
681	IF ( averaging_interval_pr /= 0.0 ) THEN
682	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
683	ENDIF
684
685	!
686	!-- DATA output
687	WRITE ( io, 330 )
688	IF ( averaging_interval_pr /= 0.0 ) THEN
689	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
690	ENDIF
691
692	!
693	!-- 1D-profiles
694	dopr_chr = 'Profile:'
695	IF ( dopr_n /= 0 ) THEN
696	WRITE ( io, 331 )
697
698	output_format = ''
699	IF ( netcdf_output ) THEN
700	IF ( netcdf_64bit ) THEN
701	output_format = 'netcdf (64 bit offset)'
702	ELSE
703	output_format = 'netcdf'
704	ENDIF
705	ENDIF
706	IF ( profil_output ) THEN
707	IF ( netcdf_output ) THEN
708	output_format = TRIM( output_format ) // ' and profil'
709	ELSE
710	output_format = 'profil'
711	ENDIF
712	ENDIF
713	WRITE ( io, 344 ) output_format
714
715	DO i = 1, dopr_n
716	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
717	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
718	WRITE ( io, 332 ) dopr_chr
719	dopr_chr = ' :'
720	ENDIF
721	ENDDO
722
723	IF ( dopr_chr /= '' ) THEN
724	WRITE ( io, 332 ) dopr_chr
725	ENDIF
726	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
727	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
728	ENDIF
729
730	!
731	!-- 2D-arrays
732	DO av = 0, 1
733
734	i = 1
735	do2d_xy = ''
736	do2d_xz = ''
737	do2d_yz = ''
738	DO WHILE ( do2d(av,i) /= ' ' )
739
740	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
741	do2d_mode = do2d(av,i)(l-1:l)
742
743	SELECT CASE ( do2d_mode )
744	CASE ( 'xy' )
745	ll = LEN_TRIM( do2d_xy )
746	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
747	CASE ( 'xz' )
748	ll = LEN_TRIM( do2d_xz )
749	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
750	CASE ( 'yz' )
751	ll = LEN_TRIM( do2d_yz )
752	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
753	END SELECT
754
755	i = i + 1
756
757	ENDDO
758
759	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
760	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
761	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
762	( netcdf_output .OR. iso2d_output ) ) THEN
763
764	IF ( av == 0 ) THEN
765	WRITE ( io, 334 ) ''
766	ELSE
767	WRITE ( io, 334 ) '(time-averaged)'
768	ENDIF
769
770	IF ( do2d_at_begin ) THEN
771	begin_chr = 'and at the start'
772	ELSE
773	begin_chr = ''
774	ENDIF
775
776	output_format = ''
777	IF ( netcdf_output ) THEN
778	IF ( netcdf_64bit ) THEN
779	output_format = 'netcdf (64 bit offset)'
780	ELSE
781	output_format = 'netcdf'
782	ENDIF
783	ENDIF
784	IF ( iso2d_output ) THEN
785	IF ( netcdf_output ) THEN
786	output_format = TRIM( output_format ) // ' and iso2d'
787	ELSE
788	output_format = 'iso2d'
789	ENDIF
790	ENDIF
791	WRITE ( io, 344 ) output_format
792
793	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
794	i = 1
795	slices = '/'
796	coordinates = '/'
797	!
798	!-- Building strings with index and coordinate informations of the
799	!-- slices
800	DO WHILE ( section(i,1) /= -9999 )
801
802	WRITE (section_chr,'(I5)') section(i,1)
803	section_chr = ADJUSTL( section_chr )
804	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
805
806	IF ( section(i,1) == -1 ) THEN
807	WRITE (coor_chr,'(F10.1)') -1.0
808	ELSE
809	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
810	ENDIF
811	coor_chr = ADJUSTL( coor_chr )
812	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
813
814	i = i + 1
815	ENDDO
816	IF ( av == 0 ) THEN
817	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
818	TRIM( begin_chr ), 'k', TRIM( slices ), &
819	TRIM( coordinates )
820	IF ( skip_time_do2d_xy /= 0.0 ) THEN
821	WRITE ( io, 339 ) skip_time_do2d_xy
822	ENDIF
823	ELSE
824	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
825	TRIM( begin_chr ), averaging_interval, &
826	dt_averaging_input, 'k', TRIM( slices ), &
827	TRIM( coordinates )
828	IF ( skip_time_data_output_av /= 0.0 ) THEN
829	WRITE ( io, 339 ) skip_time_data_output_av
830	ENDIF
831	ENDIF
832
833	ENDIF
834
835	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
836	i = 1
837	slices = '/'
838	coordinates = '/'
839	!
840	!-- Building strings with index and coordinate informations of the
841	!-- slices
842	DO WHILE ( section(i,2) /= -9999 )
843
844	WRITE (section_chr,'(I5)') section(i,2)
845	section_chr = ADJUSTL( section_chr )
846	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
847
848	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
849	coor_chr = ADJUSTL( coor_chr )
850	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
851
852	i = i + 1
853	ENDDO
854	IF ( av == 0 ) THEN
855	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
856	TRIM( begin_chr ), 'j', TRIM( slices ), &
857	TRIM( coordinates )
858	IF ( skip_time_do2d_xz /= 0.0 ) THEN
859	WRITE ( io, 339 ) skip_time_do2d_xz
860	ENDIF
861	ELSE
862	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
863	TRIM( begin_chr ), averaging_interval, &
864	dt_averaging_input, 'j', TRIM( slices ), &
865	TRIM( coordinates )
866	IF ( skip_time_data_output_av /= 0.0 ) THEN
867	WRITE ( io, 339 ) skip_time_data_output_av
868	ENDIF
869	ENDIF
870	ENDIF
871
872	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
873	i = 1
874	slices = '/'
875	coordinates = '/'
876	!
877	!-- Building strings with index and coordinate informations of the
878	!-- slices
879	DO WHILE ( section(i,3) /= -9999 )
880
881	WRITE (section_chr,'(I5)') section(i,3)
882	section_chr = ADJUSTL( section_chr )
883	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
884
885	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
886	coor_chr = ADJUSTL( coor_chr )
887	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
888
889	i = i + 1
890	ENDDO
891	IF ( av == 0 ) THEN
892	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
893	TRIM( begin_chr ), 'i', TRIM( slices ), &
894	TRIM( coordinates )
895	IF ( skip_time_do2d_yz /= 0.0 ) THEN
896	WRITE ( io, 339 ) skip_time_do2d_yz
897	ENDIF
898	ELSE
899	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
900	TRIM( begin_chr ), averaging_interval, &
901	dt_averaging_input, 'i', TRIM( slices ), &
902	TRIM( coordinates )
903	IF ( skip_time_data_output_av /= 0.0 ) THEN
904	WRITE ( io, 339 ) skip_time_data_output_av
905	ENDIF
906	ENDIF
907	ENDIF
908
909	ENDIF
910
911	ENDDO
912
913	!
914	!-- 3d-arrays
915	DO av = 0, 1
916
917	i = 1
918	do3d_chr = ''
919	DO WHILE ( do3d(av,i) /= ' ' )
920
921	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
922	i = i + 1
923
924	ENDDO
925
926	IF ( do3d_chr /= '' ) THEN
927	IF ( av == 0 ) THEN
928	WRITE ( io, 336 ) ''
929	ELSE
930	WRITE ( io, 336 ) '(time-averaged)'
931	ENDIF
932
933	output_format = ''
934	IF ( netcdf_output ) THEN
935	IF ( netcdf_64bit_3d ) THEN
936	output_format = 'netcdf (64 bit offset)'
937	ELSE
938	output_format = 'netcdf'
939	ENDIF
940	ENDIF
941	IF ( avs_output ) THEN
942	IF ( netcdf_output ) THEN
943	output_format = TRIM( output_format ) // ' and avs'
944	ELSE
945	output_format = 'avs'
946	ENDIF
947	ENDIF
948	WRITE ( io, 344 ) output_format
949
950	IF ( do3d_at_begin ) THEN
951	begin_chr = 'and at the start'
952	ELSE
953	begin_chr = ''
954	ENDIF
955	IF ( av == 0 ) THEN
956	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
957	zu(nz_do3d), nz_do3d
958	ELSE
959	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
960	TRIM( begin_chr ), averaging_interval, &
961	dt_averaging_input, zu(nz_do3d), nz_do3d
962	ENDIF
963
964	IF ( do3d_compress ) THEN
965	do3d_chr = ''
966	i = 1
967	DO WHILE ( do3d(av,i) /= ' ' )
968
969	SELECT CASE ( do3d(av,i) )
970	CASE ( 'u' )
971	j = 1
972	CASE ( 'v' )
973	j = 2
974	CASE ( 'w' )
975	j = 3
976	CASE ( 'p' )
977	j = 4
978	CASE ( 'pt' )
979	j = 5
980	END SELECT
981	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
982	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
983	':' // prec // ','
984	i = i + 1
985
986	ENDDO
987	WRITE ( io, 338 ) do3d_chr
988
989	ENDIF
990
991	IF ( av == 0 ) THEN
992	IF ( skip_time_do3d /= 0.0 ) THEN
993	WRITE ( io, 339 ) skip_time_do3d
994	ENDIF
995	ELSE
996	IF ( skip_time_data_output_av /= 0.0 ) THEN
997	WRITE ( io, 339 ) skip_time_data_output_av
998	ENDIF
999	ENDIF
1000
1001	ENDIF
1002
1003	ENDDO
1004
1005	!
1006	!-- masked arrays
1007	IF ( masks > 0 ) WRITE ( io, 345 ) &
1008	mask_scale_x, mask_scale_y, mask_scale_z
1009	DO mid = 1, masks
1010	DO av = 0, 1
1011
1012	i = 1
1013	domask_chr = ''
1014	DO WHILE ( domask(mid,av,i) /= ' ' )
1015	domask_chr = TRIM( domask_chr ) // ' ' // &
1016	TRIM( domask(mid,av,i) ) // ','
1017	i = i + 1
1018	ENDDO
1019
1020	IF ( domask_chr /= '' ) THEN
1021	IF ( av == 0 ) THEN
1022	WRITE ( io, 346 ) '', mid
1023	ELSE
1024	WRITE ( io, 346 ) ' (time-averaged)', mid
1025	ENDIF
1026
1027	output_format = ''
1028	IF ( netcdf_output ) THEN
1029	SELECT CASE ( nc_format_mask(mid,av) )
1030	CASE ( 1 )
1031	output_format = 'netcdf (classic format)'
1032	CASE ( 2 )
1033	output_format = 'netcdf (64bit offset format)'
1034	CASE ( 3 )
1035	output_format = 'netcdf (NetCDF 4 format)'
1036	CASE ( 4 )
1037	output_format = 'netcdf (NetCDF 4 classic model format)'
1038	END SELECT
1039	ENDIF
1040	WRITE ( io, 344 ) output_format
1041
1042	IF ( av == 0 ) THEN
1043	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1044	ELSE
1045	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1046	averaging_interval, dt_averaging_input
1047	ENDIF
1048
1049	IF ( av == 0 ) THEN
1050	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1051	WRITE ( io, 339 ) skip_time_domask(mid)
1052	ENDIF
1053	ELSE
1054	IF ( skip_time_data_output_av /= 0.0 ) THEN
1055	WRITE ( io, 339 ) skip_time_data_output_av
1056	ENDIF
1057	ENDIF
1058	!
1059	!-- output locations
1060	DO dim = 1, 3
1061	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1062	count = 0
1063	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1064	count = count + 1
1065	ENDDO
1066	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1067	mask(mid,dim,:count)
1068	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1069	mask_loop(mid,dim,2) < 0.0 .AND. &
1070	mask_loop(mid,dim,3) == 0.0 ) THEN
1071	WRITE ( io, 350 ) dir(dim), dir(dim)
1072	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1073	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1074	mask_loop(mid,dim,1:2)
1075	ELSE
1076	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1077	mask_loop(mid,dim,1:3)
1078	ENDIF
1079	ENDDO
1080	ENDIF
1081
1082	ENDDO
1083	ENDDO
1084
1085	!
1086	!-- Timeseries
1087	IF ( dt_dots /= 9999999.9 ) THEN
1088	WRITE ( io, 340 )
1089
1090	output_format = ''
1091	IF ( netcdf_output ) THEN
1092	IF ( netcdf_64bit ) THEN
1093	output_format = 'netcdf (64 bit offset)'
1094	ELSE
1095	output_format = 'netcdf'
1096	ENDIF
1097	ENDIF
1098	IF ( profil_output ) THEN
1099	IF ( netcdf_output ) THEN
1100	output_format = TRIM( output_format ) // ' and profil'
1101	ELSE
1102	output_format = 'profil'
1103	ENDIF
1104	ENDIF
1105	WRITE ( io, 344 ) output_format
1106	WRITE ( io, 341 ) dt_dots
1107	ENDIF
1108
1109	#if defined( __dvrp_graphics )
1110	!
1111	!-- Dvrp-output
1112	IF ( dt_dvrp /= 9999999.9 ) THEN
1113	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1114	TRIM( dvrp_username ), TRIM( dvrp_directory )
1115	i = 1
1116	l = 0
1117	m = 0
1118	DO WHILE ( mode_dvrp(i) /= ' ' )
1119	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1120	READ ( mode_dvrp(i), '(10X,I2)' ) j
1121	l = l + 1
1122	IF ( do3d(0,j) /= ' ' ) THEN
1123	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1124	isosurface_color(:,l)
1125	ENDIF
1126	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1127	READ ( mode_dvrp(i), '(6X,I2)' ) j
1128	m = m + 1
1129	IF ( do2d(0,j) /= ' ' ) THEN
1130	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1131	slicer_range_limits_dvrp(:,m)
1132	ENDIF
1133	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1134	WRITE ( io, 363 ) dvrp_psize
1135	IF ( particle_dvrpsize /= 'none' ) THEN
1136	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1137	dvrpsize_interval
1138	ENDIF
1139	IF ( particle_color /= 'none' ) THEN
1140	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1141	color_interval
1142	ENDIF
1143	ENDIF
1144	i = i + 1
1145	ENDDO
1146
1147	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1148	superelevation_y, superelevation, clip_dvrp_l, &
1149	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1150
1151	IF ( TRIM( topography ) /= 'flat' ) THEN
1152	WRITE ( io, 366 ) topography_color
1153	IF ( cluster_size > 1 ) THEN
1154	WRITE ( io, 367 ) cluster_size
1155	ENDIF
1156	ENDIF
1157
1158	ENDIF
1159	#endif
1160
1161	#if defined( __spectra )
1162	!
1163	!-- Spectra output
1164	IF ( dt_dosp /= 9999999.9 ) THEN
1165	WRITE ( io, 370 )
1166
1167	output_format = ''
1168	IF ( netcdf_output ) THEN
1169	IF ( netcdf_64bit ) THEN
1170	output_format = 'netcdf (64 bit offset)'
1171	ELSE
1172	output_format = 'netcdf'
1173	ENDIF
1174	ENDIF
1175	IF ( profil_output ) THEN
1176	IF ( netcdf_output ) THEN
1177	output_format = TRIM( output_format ) // ' and profil'
1178	ELSE
1179	output_format = 'profil'
1180	ENDIF
1181	ENDIF
1182	WRITE ( io, 344 ) output_format
1183	WRITE ( io, 371 ) dt_dosp
1184	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1185	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1186	( spectra_direction(i), i = 1,10 ), &
1187	( comp_spectra_level(i), i = 1,100 ), &
1188	( plot_spectra_level(i), i = 1,100 ), &
1189	averaging_interval_sp, dt_averaging_input_pr
1190	ENDIF
1191	#endif
1192
1193	WRITE ( io, 99 )
1194
1195	!
1196	!-- Physical quantities
1197	WRITE ( io, 400 )
1198
1199	!
1200	!-- Geostrophic parameters
1201	WRITE ( io, 410 ) omega, phi, f, fs
1202
1203	!
1204	!-- Other quantities
1205	WRITE ( io, 411 ) g
1206	IF ( use_reference ) THEN
1207	IF ( ocean ) THEN
1208	WRITE ( io, 412 ) prho_reference
1209	ELSE
1210	WRITE ( io, 413 ) pt_reference
1211	ENDIF
1212	ENDIF
1213
1214	!
1215	!-- Cloud physics parameters
1216	IF ( cloud_physics ) THEN
1217	WRITE ( io, 415 )
1218	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1219	ENDIF
1220
1221	!-- Profile of the geostrophic wind (component ug)
1222	!-- Building output strings
1223	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1224	gradients = '------'
1225	slices = ' 0'
1226	coordinates = ' 0.0'
1227	i = 1
1228	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1229
1230	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1231	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1232
1233	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1234	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1235
1236	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1237	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1238
1239	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1240	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1241
1242	i = i + 1
1243	ENDDO
1244
1245	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1246	TRIM( gradients ), TRIM( slices )
1247
1248	!-- Profile of the geostrophic wind (component vg)
1249	!-- Building output strings
1250	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1251	gradients = '------'
1252	slices = ' 0'
1253	coordinates = ' 0.0'
1254	i = 1
1255	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1256
1257	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1258	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1259
1260	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1261	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1262
1263	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1264	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1265
1266	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1267	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1268
1269	i = i + 1
1270	ENDDO
1271
1272	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1273	TRIM( gradients ), TRIM( slices )
1274
1275	!
1276	!-- Initial temperature profile
1277	!-- Building output strings, starting with surface temperature
1278	WRITE ( temperatures, '(F6.2)' ) pt_surface
1279	gradients = '------'
1280	slices = ' 0'
1281	coordinates = ' 0.0'
1282	i = 1
1283	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1284
1285	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1286	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1287
1288	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1289	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1290
1291	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1292	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1293
1294	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1295	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1296
1297	i = i + 1
1298	ENDDO
1299
1300	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1301	TRIM( gradients ), TRIM( slices )
1302
1303	!
1304	!-- Initial humidity profile
1305	!-- Building output strings, starting with surface humidity
1306	IF ( humidity .OR. passive_scalar ) THEN
1307	WRITE ( temperatures, '(E8.1)' ) q_surface
1308	gradients = '--------'
1309	slices = ' 0'
1310	coordinates = ' 0.0'
1311	i = 1
1312	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1313
1314	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1315	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1316
1317	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1318	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1319
1320	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1321	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1322
1323	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1324	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1325
1326	i = i + 1
1327	ENDDO
1328
1329	IF ( humidity ) THEN
1330	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1331	TRIM( gradients ), TRIM( slices )
1332	ELSE
1333	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1334	TRIM( gradients ), TRIM( slices )
1335	ENDIF
1336	ENDIF
1337
1338	!
1339	!-- Initial salinity profile
1340	!-- Building output strings, starting with surface salinity
1341	IF ( ocean ) THEN
1342	WRITE ( temperatures, '(F6.2)' ) sa_surface
1343	gradients = '------'
1344	slices = ' 0'
1345	coordinates = ' 0.0'
1346	i = 1
1347	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1348
1349	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1350	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1351
1352	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1353	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1354
1355	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1356	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1357
1358	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1359	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1360
1361	i = i + 1
1362	ENDDO
1363
1364	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1365	TRIM( gradients ), TRIM( slices )
1366	ENDIF
1367
1368	!
1369	!-- Profile for the large scale vertial velocity
1370	!-- Building output strings, starting with surface value
1371	IF ( large_scale_subsidence ) THEN
1372	temperatures = ' 0.0'
1373	gradients = '------'
1374	slices = ' 0'
1375	coordinates = ' 0.0'
1376	i = 1
1377	DO WHILE ( ws_vertical_gradient_level_ind(i) /= -9999 )
1378
1379	WRITE (coor_chr,'(E10.2,7X)') &
1380	w_subs(ws_vertical_gradient_level_ind(i))
1381	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1382
1383	WRITE (coor_chr,'(E10.2,7X)') ws_vertical_gradient(i)
1384	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1385
1386	WRITE (coor_chr,'(I10,7X)') ws_vertical_gradient_level_ind(i)
1387	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1388
1389	WRITE (coor_chr,'(F10.2,7X)') ws_vertical_gradient_level(i)
1390	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1391
1392	i = i + 1
1393	ENDDO
1394
1395	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1396	TRIM( gradients ), TRIM( slices )
1397	ENDIF
1398
1399	!
1400	!-- LES / turbulence parameters
1401	WRITE ( io, 450 )
1402
1403	!--
1404	! ... LES-constants used must still be added here
1405	!--
1406	IF ( constant_diffusion ) THEN
1407	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1408	prandtl_number
1409	ENDIF
1410	IF ( .NOT. constant_diffusion) THEN
1411	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1412	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1413	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1414	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1415	ENDIF
1416
1417	!
1418	!-- Special actions during the run
1419	WRITE ( io, 470 )
1420	IF ( create_disturbances ) THEN
1421	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1422	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1423	zu(disturbance_level_ind_t), disturbance_level_ind_t
1424	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1425	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1426	ELSE
1427	WRITE ( io, 473 ) disturbance_energy_limit
1428	ENDIF
1429	WRITE ( io, 474 ) TRIM( random_generator )
1430	ENDIF
1431	IF ( pt_surface_initial_change /= 0.0 ) THEN
1432	WRITE ( io, 475 ) pt_surface_initial_change
1433	ENDIF
1434	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1435	WRITE ( io, 476 ) q_surface_initial_change
1436	ENDIF
1437	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1438	WRITE ( io, 477 ) q_surface_initial_change
1439	ENDIF
1440
1441	IF ( particle_advection ) THEN
1442	!
1443	!-- Particle attributes
1444	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1445	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1446	end_time_prel, dt_sort_particles
1447	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1448	IF ( random_start_position ) WRITE ( io, 481 )
1449	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1450	WRITE ( io, 495 ) total_number_of_particles
1451	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1452	WRITE ( io, 483 ) maximum_number_of_tailpoints
1453	IF ( minimum_tailpoint_distance /= 0 ) THEN
1454	WRITE ( io, 484 ) total_number_of_tails, &
1455	minimum_tailpoint_distance, &
1456	maximum_tailpoint_age
1457	ENDIF
1458	ENDIF
1459	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1460	WRITE ( io, 485 ) dt_write_particle_data
1461	output_format = ''
1462	IF ( netcdf_output ) THEN
1463	IF ( netcdf_64bit ) THEN
1464	output_format = 'netcdf (64 bit offset) and binary'
1465	ELSE
1466	output_format = 'netcdf and binary'
1467	ENDIF
1468	ELSE
1469	output_format = 'binary'
1470	ENDIF
1471	WRITE ( io, 344 ) output_format
1472	ENDIF
1473	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1474	IF ( write_particle_statistics ) WRITE ( io, 486 )
1475
1476	WRITE ( io, 487 ) number_of_particle_groups
1477
1478	DO i = 1, number_of_particle_groups
1479	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1480	WRITE ( io, 490 ) i, 0.0
1481	WRITE ( io, 492 )
1482	ELSE
1483	WRITE ( io, 490 ) i, radius(i)
1484	IF ( density_ratio(i) /= 0.0 ) THEN
1485	WRITE ( io, 491 ) density_ratio(i)
1486	ELSE
1487	WRITE ( io, 492 )
1488	ENDIF
1489	ENDIF
1490	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1491	pdx(i), pdy(i), pdz(i)
1492	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1493	ENDDO
1494
1495	ENDIF
1496
1497
1498	!
1499	!-- Parameters of 1D-model
1500	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1501	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1502	mixing_length_1d, dissipation_1d
1503	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1504	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1505	ENDIF
1506	ENDIF
1507
1508	!
1509	!-- User-defined informations
1510	CALL user_header( io )
1511
1512	WRITE ( io, 99 )
1513
1514	!
1515	!-- Write buffer contents to disc immediately
1516	CALL local_flush( io )
1517
1518	!
1519	!-- Here the FORMATs start
1520
1521	99 FORMAT (1X,78('-'))
1522	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1523	1X,'* ',A,' *',9X,A/ &
1524	1X,'***************************',9X,42('-'))
1525	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1526	37X,42('-'))
1527	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1528	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1529	' Run on host: ',A10)
1530	#if defined( __parallel )
1531	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1532	')',1X,A)
1533	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1534	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1535	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1536	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1537	37X,'because the job is running on an SMP-cluster')
1538	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1539	#endif
1540	110 FORMAT (/' Numerical Schemes:'/ &
1541	' -----------------'/)
1542	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1543	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1544	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1545	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1546	' or Upstream')
1547	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1548	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1549	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1550	' or Upstream')
1551	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1552	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1553	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1554	' Translation velocity = ',A/ &
1555	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1556	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1557	' of timestep changes)')
1558	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1559	' timestep changes')
1560	122 FORMAT (' --> Time differencing scheme: ',A)
1561	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1562	' maximum damping coefficient: ',F5.3, ' 1/s')
1563	124 FORMAT (' Spline-overshoots are being suppressed')
1564	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1565	' of'/ &
1566	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1567	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1568	' of'/ &
1569	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1570	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1571	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1572	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1573	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1574	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1575	130 FORMAT (' --> Additional prognostic equation for the total water content')
1576	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1577	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1578	' effective emissivity scheme')
1579	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1580	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1581	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1582	A,'-cycle)'/ &
1583	' number of grid levels: ',I2/ &
1584	' Gauss-Seidel red/black iterations: ',I2)
1585	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1586	I3,')')
1587	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1588	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1589	I3,')'/ &
1590	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1591	I3,')')
1592	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1593	139 FORMAT (' --> Loop optimization method: ',A)
1594	140 FORMAT (' maximum residual allowed: ',E10.3)
1595	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1596	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1597	'step')
1598	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1599	'kinetic energy')
1600	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1601	'conserved'/ &
1602	' using the ',A,' mode')
1603	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1604	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1605	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1606	/' starting from dp_level_b =', F8.3, 'm', A /)
1607	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1608	'prognostic equation for')
1609	154 FORMAT (' the potential temperature')
1610	200 FORMAT (//' Run time and time step information:'/ &
1611	' ----------------------------------'/)
1612	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1613	' CFL-factor: ',F4.2)
1614	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1615	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1616	' End time: ',F9.3,' s')
1617	204 FORMAT ( A,F9.3,' s')
1618	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1619	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1620	' CPU-time used: ',F9.3,' s per timestep: ', &
1621	' ',F9.3,' s'/ &
1622	' per second of simulated tim', &
1623	'e: ',F9.3,' s')
1624	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1625	250 FORMAT (//' Computational grid and domain size:'/ &
1626	' ----------------------------------'// &
1627	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1628	' m dz = ',F7.3,' m'/ &
1629	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1630	' m z(u) = ',F10.3,' m'/)
1631	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1632	' factor: ',F5.3/ &
1633	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1634	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1635	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1636	255 FORMAT (' Subdomains have equal size')
1637	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1638	'have smaller sizes'/ &
1639	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1640	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1641	' degrees')
1642	270 FORMAT (//' Topography informations:'/ &
1643	' -----------------------'// &
1644	1X,'Topography: ',A)
1645	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1646	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1647	' / ',I4)
1648	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1649	' direction' / &
1650	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1651	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1652	278 FORMAT (' Topography grid definition convention:'/ &
1653	' cell edge (staggered grid points'/ &
1654	' (u in x-direction, v in y-direction))' /)
1655	279 FORMAT (' Topography grid definition convention:'/ &
1656	' cell center (scalar grid points)' /)
1657	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1658	' ------------------------------'// &
1659	' Canopy mode: ', A / &
1660	' Canopy top: ',I4 / &
1661	' Leaf drag coefficient: ',F6.2 /)
1662	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1663	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1664	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1665	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1666	' Height: ',A,' m'/ &
1667	' Leaf area density: ',A,' m2/m3'/ &
1668	' Gradient: ',A,' m2/m4'/ &
1669	' Gridpoint: ',A)
1670
1671	300 FORMAT (//' Boundary conditions:'/ &
1672	' -------------------'// &
1673	' p uv ', &
1674	' pt'// &
1675	' B. bound.: ',A/ &
1676	' T. bound.: ',A)
1677	301 FORMAT (/' ',A// &
1678	' B. bound.: ',A/ &
1679	' T. bound.: ',A)
1680	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1681	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1682	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1683	'computational u,v-level:'// &
1684	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1685	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1686	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1687	307 FORMAT (' Heatflux has a random normal distribution')
1688	308 FORMAT (' Predefined surface temperature')
1689	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1690	310 FORMAT (//' 1D-Model:'// &
1691	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1692	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1693	312 FORMAT (' Predefined surface humidity')
1694	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1695	314 FORMAT (' Predefined scalar value at the surface')
1696	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1697	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1698	'atmosphere model')
1699	317 FORMAT (//' Lateral boundaries:'/ &
1700	' left/right: ',A/ &
1701	' north/south: ',A)
1702	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1703	'max =',F5.1,' m**2/s')
1704	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1705	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1706	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1707	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1708	' v: ',F9.6,' m2/s2')
1709	325 FORMAT (//' List output:'/ &
1710	' -----------'// &
1711	' 1D-Profiles:'/ &
1712	' Output every ',F8.2,' s')
1713	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1714	' Averaging input every ',F8.2,' s')
1715	330 FORMAT (//' Data output:'/ &
1716	' -----------'/)
1717	331 FORMAT (/' 1D-Profiles:')
1718	332 FORMAT (/' ',A)
1719	333 FORMAT (' Output every ',F8.2,' s',/ &
1720	' Time averaged over ',F8.2,' s'/ &
1721	' Averaging input every ',F8.2,' s')
1722	334 FORMAT (/' 2D-Arrays',A,':')
1723	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1724	' Output every ',F8.2,' s ',A/ &
1725	' Cross sections at ',A1,' = ',A/ &
1726	' scalar-coordinates: ',A,' m'/)
1727	336 FORMAT (/' 3D-Arrays',A,':')
1728	337 FORMAT (/' Arrays: ',A/ &
1729	' Output every ',F8.2,' s ',A/ &
1730	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1731	338 FORMAT (' Compressed data output'/ &
1732	' Decimal precision: ',A/)
1733	339 FORMAT (' No output during initial ',F8.2,' s')
1734	340 FORMAT (/' Time series:')
1735	341 FORMAT (' Output every ',F8.2,' s'/)
1736	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1737	' Output every ',F8.2,' s ',A/ &
1738	' Time averaged over ',F8.2,' s'/ &
1739	' Averaging input every ',F8.2,' s'/ &
1740	' Cross sections at ',A1,' = ',A/ &
1741	' scalar-coordinates: ',A,' m'/)
1742	343 FORMAT (/' Arrays: ',A/ &
1743	' Output every ',F8.2,' s ',A/ &
1744	' Time averaged over ',F8.2,' s'/ &
1745	' Averaging input every ',F8.2,' s'/ &
1746	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1747	344 FORMAT (' Output format: ',A/)
1748	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1749	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1750	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1751	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1752	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1753	347 FORMAT (' Variables: ',A/ &
1754	' Output every ',F8.2,' s')
1755	348 FORMAT (' Variables: ',A/ &
1756	' Output every ',F8.2,' s'/ &
1757	' Time averaged over ',F8.2,' s'/ &
1758	' Averaging input every ',F8.2,' s')
1759	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1760	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1761	13(' ',8(F8.2,',')/) )
1762	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1763	'all gridpoints along ',A,'-direction (default).' )
1764	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1765	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1766	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1767	#if defined( __dvrp_graphics )
1768	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1769	' Output every ',F7.1,' s'/ &
1770	' Output mode: ',A/ &
1771	' Host / User: ',A,' / ',A/ &
1772	' Directory: ',A// &
1773	' The sequence contains:')
1774	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1775	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1776	362 FORMAT (/' Slicer plane ',A/ &
1777	' Slicer limits: [',F6.2,',',F6.2,']')
1778	363 FORMAT (/' Particles'/ &
1779	' particle size: ',F7.2,' m')
1780	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1781	F6.2,',',F6.2,']')
1782	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1783	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1784	')'/ &
1785	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1786	' from y = ',F9.1,' m to y = ',F9.1,' m')
1787	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1788	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1789	#endif
1790	#if defined( __spectra )
1791	370 FORMAT (' Spectra:')
1792	371 FORMAT (' Output every ',F7.1,' s'/)
1793	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1794	' Directions: ', 10(A5,',')/ &
1795	' height levels k = ', 20(I3,',')/ &
1796	' ', 20(I3,',')/ &
1797	' ', 20(I3,',')/ &
1798	' ', 20(I3,',')/ &
1799	' ', 19(I3,','),I3,'.'/ &
1800	' height levels selected for standard plot:'/ &
1801	' k = ', 20(I3,',')/ &
1802	' ', 20(I3,',')/ &
1803	' ', 20(I3,',')/ &
1804	' ', 20(I3,',')/ &
1805	' ', 19(I3,','),I3,'.'/ &
1806	' Time averaged over ', F7.1, ' s,' / &
1807	' Profiles for the time averaging are taken every ', &
1808	F6.1,' s')
1809	#endif
1810	400 FORMAT (//' Physical quantities:'/ &
1811	' -------------------'/)
1812	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1813	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1814	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1815	' f* = ',F9.6,' 1/s')
1816	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1817	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1818	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1819	415 FORMAT (/' Cloud physics parameters:'/ &
1820	' ------------------------'/)
1821	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1822	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1823	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1824	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1825	' Vapourization heat : L_v = ',E8.2,' J/kg')
1826	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1827	' Height: ',A,' m'/ &
1828	' Temperature: ',A,' K'/ &
1829	' Gradient: ',A,' K/100m'/ &
1830	' Gridpoint: ',A)
1831	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1832	' Height: ',A,' m'/ &
1833	' Humidity: ',A,' kg/kg'/ &
1834	' Gradient: ',A,' (kg/kg)/100m'/ &
1835	' Gridpoint: ',A)
1836	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1837	' Height: ',A,' m'/ &
1838	' Scalar concentration: ',A,' kg/m**3'/ &
1839	' Gradient: ',A,' (kg/m**3)/100m'/ &
1840	' Gridpoint: ',A)
1841	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1842	' Height: ',A,' m'/ &
1843	' ug: ',A,' m/s'/ &
1844	' Gradient: ',A,' 1/100s'/ &
1845	' Gridpoint: ',A)
1846	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1847	' Height: ',A,' m'/ &
1848	' vg: ',A,' m/s'/ &
1849	' Gradient: ',A,' 1/100s'/ &
1850	' Gridpoint: ',A)
1851	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1852	' Height: ',A,' m'/ &
1853	' Salinity: ',A,' psu'/ &
1854	' Gradient: ',A,' psu/100m'/ &
1855	' Gridpoint: ',A)
1856	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1857	' Height: ',A,' m'/ &
1858	' w_subs: ',A,' m/s'/ &
1859	' Gradient: ',A,' (m/s)/100m'/ &
1860	' Gridpoint: ',A)
1861	450 FORMAT (//' LES / Turbulence quantities:'/ &
1862	' ---------------------------'/)
1863	451 FORMAT (' Diffusion coefficients are constant:'/ &
1864	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1865	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1866	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1867	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1868	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1869	470 FORMAT (//' Actions during the simulation:'/ &
1870	' -----------------------------'/)
1871	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1872	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1873	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1874	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1875	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1876	' to i/j =',I4)
1877	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1878	1X,F5.3, ' m2/s2')
1879	474 FORMAT (' Random number generator used : ',A/)
1880	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1881	'respectively, if'/ &
1882	' the value is negative) by ',F5.2,' K at the beginning of the',&
1883	' 3D-simulation'/)
1884	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1885	'respectively, if the'/ &
1886	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1887	' the 3D-simulation'/)
1888	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1889	'respectively, if the'/ &
1890	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1891	' the 3D-simulation'/)
1892	480 FORMAT (' Particles:'/ &
1893	' ---------'// &
1894	' Particle advection is active (switched on at t = ', F7.1, &
1895	' s)'/ &
1896	' Start of new particle generations every ',F6.1,' s'/ &
1897	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1898	' bottom: ', A, ' top: ', A/&
1899	' Maximum particle age: ',F9.1,' s'/ &
1900	' Advection stopped at t = ',F9.1,' s'/ &
1901	' Particles are sorted every ',F9.1,' s'/)
1902	481 FORMAT (' Particles have random start positions'/)
1903	482 FORMAT (' Particles are advected only horizontally'/)
1904	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1905	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1906	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1907	' Maximum age of the end of the tail: ',F8.2,' s')
1908	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1909	486 FORMAT (' Particle statistics are written on file'/)
1910	487 FORMAT (' Number of particle groups: ',I2/)
1911	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1912	' minimum timestep for advection: ', F7.5/)
1913	489 FORMAT (' Number of particles simultaneously released at each ', &
1914	'point: ', I5/)
1915	490 FORMAT (' Particle group ',I2,':'/ &
1916	' Particle radius: ',E10.3, 'm')
1917	491 FORMAT (' Particle inertia is activated'/ &
1918	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1919	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1920	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1921	' y:',F8.1,' - ',F8.1,' m'/&
1922	' z:',F8.1,' - ',F8.1,' m'/&
1923	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1924	' m dz = ',F8.1,' m'/)
1925	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1926	F8.2,' s'/)
1927	495 FORMAT (' Number of particles in total domain: ',I10/)
1928	500 FORMAT (//' 1D-Model parameters:'/ &
1929	' -------------------'// &
1930	' Simulation time: ',F8.1,' s'/ &
1931	' Run-controll output every: ',F8.1,' s'/ &
1932	' Vertical profile output every: ',F8.1,' s'/ &
1933	' Mixing length calculation: ',A/ &
1934	' Dissipation calculation: ',A/)
1935	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1936
1937
1938	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |