Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 366

Last change on this file since 366 was 346, checked in by raasch, 15 years ago
small updates
Property svn:keywords set to `Id`
File size: 69.1 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
7	! Coupling with independent precursor runs.
8	! Output of messages replaced by message handling routine.
9	! Output of several additional dvr parameters
10	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
11	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
12	! dp_smooth, dpdxy, u_bulk, v_bulk
13	! topography_grid_convention moved from user_header
14	! small bugfix concerning 3d 64bit netcdf output format
15	!
16	! Former revisions:
17	! -----------------
18	! $Id: header.f90 346 2009-07-06 10:13:41Z raasch $
19	!
20	! 206 2008-10-13 14:59:11Z raasch
21	! Bugfix: error in zu index in case of section_xy = -1
22	!
23	! 198 2008-09-17 08:55:28Z raasch
24	! Format adjustments allowing output of larger revision numbers
25	!
26	! 197 2008-09-16 15:29:03Z raasch
27	! allow 100 spectra levels instead of 10 for consistency with
28	! define_netcdf_header,
29	! bugfix in the output of the characteristic levels of potential temperature,
30	! geostrophic wind, scalar concentration, humidity and leaf area density,
31	! output of turbulence recycling informations
32	!
33	! 138 2007-11-28 10:03:58Z letzel
34	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
35	! Allow two instead of one digit to specify isosurface and slicer variables.
36	! Output of sorting frequency of particles
37	!
38	! 108 2007-08-24 15:10:38Z letzel
39	! Output of informations for coupled model runs (boundary conditions etc.)
40	! + output of momentumfluxes at the top boundary
41	! Rayleigh damping for ocean, e_init
42	!
43	! 97 2007-06-21 08:23:15Z raasch
44	! Adjustments for the ocean version.
45	! use_pt_reference renamed use_reference
46	!
47	! 87 2007-05-22 15:46:47Z raasch
48	! Bugfix: output of use_upstream_for_tke
49	!
50	! 82 2007-04-16 15:40:52Z raasch
51	! Preprocessor strings for different linux clusters changed to "lc",
52	! routine local_flush is used for buffer flushing
53	!
54	! 76 2007-03-29 00:58:32Z raasch
55	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
56	! output of the loop optimization method, moisture renamed humidity,
57	! output of subversion revision number
58	!
59	! 19 2007-02-23 04:53:48Z raasch
60	! Output of scalar flux applied at top boundary
61	!
62	! RCS Log replace by Id keyword, revision history cleaned up
63	!
64	! Revision 1.63 2006/08/22 13:53:13 raasch
65	! Output of dz_max
66	!
67	! Revision 1.1 1997/08/11 06:17:20 raasch
68	! Initial revision
69	!
70	!
71	! Description:
72	! ------------
73	! Writing a header with all important informations about the actual run.
74	! This subroutine is called three times, two times at the beginning
75	! (writing information on files RUN_CONTROL and HEADER) and one time at the
76	! end of the run, then writing additional information about CPU-usage on file
77	! header.
78	!------------------------------------------------------------------------------!
79
80	USE arrays_3d
81	USE control_parameters
82	USE cloud_parameters
83	USE cpulog
84	USE dvrp_variables
85	USE grid_variables
86	USE indices
87	USE model_1d
88	USE particle_attributes
89	USE pegrid
90	USE spectrum
91
92	IMPLICIT NONE
93
94	CHARACTER (LEN=1) :: prec
95	CHARACTER (LEN=2) :: do2d_mode
96	CHARACTER (LEN=5) :: section_chr
97	CHARACTER (LEN=9) :: time_to_string
98	CHARACTER (LEN=10) :: coor_chr, host_chr
99	CHARACTER (LEN=16) :: begin_chr
100	CHARACTER (LEN=23) :: ver_rev
101	CHARACTER (LEN=40) :: output_format
102	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
103	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
104	run_classification
105	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
106	temperatures, ugcomponent, vgcomponent
107	CHARACTER (LEN=85) :: roben, runten
108
109	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, &
110	cyn, cys, i, ihost, io, j, l, ll, m, mpi_type
111	REAL :: cpuseconds_per_simulated_second
112
113	!
114	!-- Open the output file. At the end of the simulation, output is directed
115	!-- to unit 19.
116	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
117	.NOT. simulated_time_at_begin /= simulated_time ) THEN
118	io = 15 ! header output on file RUN_CONTROL
119	ELSE
120	io = 19 ! header output on file HEADER
121	ENDIF
122	CALL check_open( io )
123
124	!
125	!-- At the end of the run, output file (HEADER) will be rewritten with
126	!-- new informations
127	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
128
129	!
130	!-- Determine kind of model run
131	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
132	run_classification = '3D - restart run'
133	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
134	run_classification = '3D - run with cyclic fill of 3D - prerun data'
135	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
136	run_classification = '3D - run without 1D - prerun'
137	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
138	run_classification = '3D - run with 1D - prerun'
139	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
140	run_classification = '3D - run initialized by user'
141	ELSE
142	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
143	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
144	ENDIF
145	IF ( ocean ) THEN
146	run_classification = 'ocean - ' // run_classification
147	ELSE
148	run_classification = 'atmosphere - ' // run_classification
149	ENDIF
150
151	!
152	!-- Run-identification, date, time, host
153	host_chr = host(1:10)
154	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
155	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
156	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
157	#if defined( __mpi2 )
158	mpi_type = 2
159	#else
160	mpi_type = 1
161	#endif
162	WRITE ( io, 101 ) mpi_type, coupling_mode
163	ENDIF
164	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
165	ADJUSTR( host_chr )
166	#if defined( __parallel )
167	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
168	char1 = 'calculated'
169	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
170	host(1:2) == 'lc' ) .AND. &
171	npex == -1 .AND. pdims(2) == 1 ) THEN
172	char1 = 'forced'
173	ELSE
174	char1 = 'predefined'
175	ENDIF
176	IF ( threads_per_task == 1 ) THEN
177	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
178	ELSE
179	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
180	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
181	ENDIF
182	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
183	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
184	npex == -1 .AND. pdims(2) == 1 ) &
185	THEN
186	WRITE ( io, 106 )
187	ELSEIF ( pdims(2) == 1 ) THEN
188	WRITE ( io, 107 ) 'x'
189	ELSEIF ( pdims(1) == 1 ) THEN
190	WRITE ( io, 107 ) 'y'
191	ENDIF
192	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
193	#endif
194	WRITE ( io, 99 )
195
196	!
197	!-- Numerical schemes
198	WRITE ( io, 110 )
199	IF ( psolver(1:7) == 'poisfft' ) THEN
200	WRITE ( io, 111 ) TRIM( fft_method )
201	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
202	ELSEIF ( psolver == 'sor' ) THEN
203	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
204	ELSEIF ( psolver == 'multigrid' ) THEN
205	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
206	IF ( mg_cycles == -1 ) THEN
207	WRITE ( io, 140 ) residual_limit
208	ELSE
209	WRITE ( io, 141 ) mg_cycles
210	ENDIF
211	IF ( mg_switch_to_pe0_level == 0 ) THEN
212	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
213	nzt_mg(1)
214	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
215	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
216	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
217	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
218	nzt_mg(mg_switch_to_pe0_level), &
219	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
220	nzt_mg(1)
221	ENDIF
222	ENDIF
223	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
224	THEN
225	WRITE ( io, 142 )
226	ENDIF
227
228	IF ( momentum_advec == 'pw-scheme' ) THEN
229	WRITE ( io, 113 )
230	ELSE
231	WRITE ( io, 114 )
232	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
233	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
234	overshoot_limit_w /= 0.0 ) THEN
235	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
236	overshoot_limit_w
237	ENDIF
238	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
239	ups_limit_w /= 0.0 ) &
240	THEN
241	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
242	ENDIF
243	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
244	ENDIF
245	IF ( scalar_advec == 'pw-scheme' ) THEN
246	WRITE ( io, 116 )
247	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
248	WRITE ( io, 117 )
249	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
250	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
251	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
252	ENDIF
253	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
254	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
255	ENDIF
256	ELSE
257	WRITE ( io, 118 )
258	ENDIF
259
260	WRITE ( io, 139 ) TRIM( loop_optimization )
261
262	IF ( galilei_transformation ) THEN
263	IF ( use_ug_for_galilei_tr ) THEN
264	char1 = 'geostrophic wind'
265	ELSE
266	char1 = 'mean wind in model domain'
267	ENDIF
268	IF ( simulated_time_at_begin == simulated_time ) THEN
269	char2 = 'at the start of the run'
270	ELSE
271	char2 = 'at the end of the run'
272	ENDIF
273	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
274	advected_distance_x/1000.0, advected_distance_y/1000.0
275	ENDIF
276	IF ( timestep_scheme == 'leapfrog' ) THEN
277	WRITE ( io, 120 )
278	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
279	WRITE ( io, 121 )
280	ELSE
281	WRITE ( io, 122 ) timestep_scheme
282	ENDIF
283	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
284	IF ( rayleigh_damping_factor /= 0.0 ) THEN
285	IF ( .NOT. ocean ) THEN
286	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
287	rayleigh_damping_factor
288	ELSE
289	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
290	rayleigh_damping_factor
291	ENDIF
292	ENDIF
293	IF ( humidity ) THEN
294	IF ( .NOT. cloud_physics ) THEN
295	WRITE ( io, 129 )
296	ELSE
297	WRITE ( io, 130 )
298	WRITE ( io, 131 )
299	IF ( radiation ) WRITE ( io, 132 )
300	IF ( precipitation ) WRITE ( io, 133 )
301	ENDIF
302	ENDIF
303	IF ( passive_scalar ) WRITE ( io, 134 )
304	IF ( conserve_volume_flow ) THEN
305	WRITE ( io, 150 ) conserve_volume_flow_mode
306	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
307	WRITE ( io, 151 ) u_bulk, v_bulk
308	ENDIF
309	ELSEIF ( dp_external ) THEN
310	IF ( dp_smooth ) THEN
311	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
312	ELSE
313	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
314	ENDIF
315	ENDIF
316	WRITE ( io, 99 )
317
318	!
319	!-- Runtime and timestep informations
320	WRITE ( io, 200 )
321	IF ( .NOT. dt_fixed ) THEN
322	WRITE ( io, 201 ) dt_max, cfl_factor
323	ELSE
324	WRITE ( io, 202 ) dt
325	ENDIF
326	WRITE ( io, 203 ) simulated_time_at_begin, end_time
327
328	IF ( time_restart /= 9999999.9 .AND. &
329	simulated_time_at_begin == simulated_time ) THEN
330	IF ( dt_restart == 9999999.9 ) THEN
331	WRITE ( io, 204 ) ' Restart at: ',time_restart
332	ELSE
333	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
334	ENDIF
335	ENDIF
336
337	IF ( simulated_time_at_begin /= simulated_time ) THEN
338	i = MAX ( log_point_s(10)%counts, 1 )
339	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
340	cpuseconds_per_simulated_second = 0.0
341	ELSE
342	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
343	( simulated_time - &
344	simulated_time_at_begin )
345	ENDIF
346	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
347	log_point_s(10)%sum / REAL( i ), &
348	cpuseconds_per_simulated_second
349	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
350	IF ( dt_restart == 9999999.9 ) THEN
351	WRITE ( io, 204 ) ' Next restart at: ',time_restart
352	ELSE
353	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
354	ENDIF
355	ENDIF
356	ENDIF
357
358	!
359	!-- Start time for coupled runs, if independent precursor runs for atmosphere
360	!-- and ocean are used. In this case, coupling_start_time defines the time
361	!-- when the coupling is switched on.
362	IF ( coupling_start_time /= 0.0 ) THEN
363	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
364	char1 = 'Precursor run for a coupled atmosphere-ocean run'
365	ELSE
366	char1 = 'Coupled atmosphere-ocean run following independent ' // &
367	'precursor runs'
368	ENDIF
369	WRITE ( io, 207 ) char1, coupling_start_time
370	ENDIF
371
372	!
373	!-- Computational grid
374	IF ( .NOT. ocean ) THEN
375	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
376	IF ( dz_stretch_level_index < nzt+1 ) THEN
377	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
378	dz_stretch_factor, dz_max
379	ENDIF
380	ELSE
381	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
382	IF ( dz_stretch_level_index > 0 ) THEN
383	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
384	dz_stretch_factor, dz_max
385	ENDIF
386	ENDIF
387	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
388	MIN( nnz+2, nzt+2 )
389	IF ( numprocs > 1 ) THEN
390	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
391	WRITE ( io, 255 )
392	ELSE
393	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
394	ENDIF
395	ENDIF
396	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
397
398	!
399	!-- Topography
400	WRITE ( io, 270 ) topography
401	SELECT CASE ( TRIM( topography ) )
402
403	CASE ( 'flat' )
404	! no actions necessary
405
406	CASE ( 'single_building' )
407	blx = INT( building_length_x / dx )
408	bly = INT( building_length_y / dy )
409	bh = INT( building_height / dz )
410
411	IF ( building_wall_left == 9999999.9 ) THEN
412	building_wall_left = ( nx + 1 - blx ) / 2 * dx
413	ENDIF
414	bxl = INT ( building_wall_left / dx + 0.5 )
415	bxr = bxl + blx
416
417	IF ( building_wall_south == 9999999.9 ) THEN
418	building_wall_south = ( ny + 1 - bly ) / 2 * dy
419	ENDIF
420	bys = INT ( building_wall_south / dy + 0.5 )
421	byn = bys + bly
422
423	WRITE ( io, 271 ) building_length_x, building_length_y, &
424	building_height, bxl, bxr, bys, byn
425
426	CASE ( 'single_street_canyon' )
427	ch = NINT( canyon_height / dz )
428	IF ( canyon_width_x /= 9999999.9 ) THEN
429	!
430	!-- Street canyon in y direction
431	cwx = NINT( canyon_width_x / dx )
432	IF ( canyon_wall_left == 9999999.9 ) THEN
433	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
434	ENDIF
435	cxl = NINT( canyon_wall_left / dx )
436	cxr = cxl + cwx
437	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
438
439	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
440	!
441	!-- Street canyon in x direction
442	cwy = NINT( canyon_width_y / dy )
443	IF ( canyon_wall_south == 9999999.9 ) THEN
444	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
445	ENDIF
446	cys = NINT( canyon_wall_south / dy )
447	cyn = cys + cwy
448	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
449	ENDIF
450
451	END SELECT
452
453	IF ( TRIM( topography ) /= 'flat' ) THEN
454	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
455	IF ( TRIM( topography ) == 'single_building' .OR. &
456	TRIM( topography ) == 'single_street_canyon' ) THEN
457	WRITE ( io, 278 )
458	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
459	WRITE ( io, 279 )
460	ENDIF
461	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
462	WRITE ( io, 278 )
463	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
464	WRITE ( io, 279 )
465	ENDIF
466	ENDIF
467
468	IF ( plant_canopy ) THEN
469
470	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
471	IF ( passive_scalar ) THEN
472	WRITE ( io, 281 ) scalar_exchange_coefficient, &
473	leaf_surface_concentration
474	ENDIF
475
476	!
477	!-- Heat flux at the top of vegetation
478	WRITE ( io, 282 ) cthf
479
480	!
481	!-- Leaf area density profile
482	!-- Building output strings, starting with surface value
483	WRITE ( learde, '(F6.2)' ) lad_surface
484	gradients = '------'
485	slices = ' 0'
486	coordinates = ' 0.0'
487	i = 1
488	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
489
490	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
491	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
492
493	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
494	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
495
496	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
497	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
498
499	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
500	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
501
502	i = i + 1
503	ENDDO
504
505	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
506	TRIM( gradients ), TRIM( slices )
507
508	ENDIF
509
510	!
511	!-- Boundary conditions
512	IF ( ibc_p_b == 0 ) THEN
513	runten = 'p(0) = 0 \|'
514	ELSEIF ( ibc_p_b == 1 ) THEN
515	runten = 'p(0) = p(1) \|'
516	ELSE
517	runten = 'p(0) = p(1) +R\|'
518	ENDIF
519	IF ( ibc_p_t == 0 ) THEN
520	roben = 'p(nzt+1) = 0 \|'
521	ELSE
522	roben = 'p(nzt+1) = p(nzt) \|'
523	ENDIF
524
525	IF ( ibc_uv_b == 0 ) THEN
526	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
527	ELSE
528	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
529	ENDIF
530	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
531	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
532	ELSEIF ( ibc_uv_t == 0 ) THEN
533	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
534	ELSE
535	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
536	ENDIF
537
538	IF ( ibc_pt_b == 0 ) THEN
539	runten = TRIM( runten ) // ' pt(0) = pt_surface'
540	ELSEIF ( ibc_pt_b == 1 ) THEN
541	runten = TRIM( runten ) // ' pt(0) = pt(1)'
542	ELSEIF ( ibc_pt_b == 2 ) THEN
543	runten = TRIM( runten ) // ' pt(0) = from coupled model'
544	ENDIF
545	IF ( ibc_pt_t == 0 ) THEN
546	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
547	ELSEIF( ibc_pt_t == 1 ) THEN
548	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
549	ELSEIF( ibc_pt_t == 2 ) THEN
550	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
551	ENDIF
552
553	WRITE ( io, 300 ) runten, roben
554
555	IF ( .NOT. constant_diffusion ) THEN
556	IF ( ibc_e_b == 1 ) THEN
557	runten = 'e(0) = e(1)'
558	ELSE
559	runten = 'e(0) = e(1) = (u/0.1)*2'
560	ENDIF
561	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
562
563	WRITE ( io, 301 ) 'e', runten, roben
564
565	ENDIF
566
567	IF ( ocean ) THEN
568	runten = 'sa(0) = sa(1)'
569	IF ( ibc_sa_t == 0 ) THEN
570	roben = 'sa(nzt+1) = sa_surface'
571	ELSE
572	roben = 'sa(nzt+1) = sa(nzt)'
573	ENDIF
574	WRITE ( io, 301 ) 'sa', runten, roben
575	ENDIF
576
577	IF ( humidity ) THEN
578	IF ( ibc_q_b == 0 ) THEN
579	runten = 'q(0) = q_surface'
580	ELSE
581	runten = 'q(0) = q(1)'
582	ENDIF
583	IF ( ibc_q_t == 0 ) THEN
584	roben = 'q(nzt) = q_top'
585	ELSE
586	roben = 'q(nzt) = q(nzt-1) + dq/dz'
587	ENDIF
588	WRITE ( io, 301 ) 'q', runten, roben
589	ENDIF
590
591	IF ( passive_scalar ) THEN
592	IF ( ibc_q_b == 0 ) THEN
593	runten = 's(0) = s_surface'
594	ELSE
595	runten = 's(0) = s(1)'
596	ENDIF
597	IF ( ibc_q_t == 0 ) THEN
598	roben = 's(nzt) = s_top'
599	ELSE
600	roben = 's(nzt) = s(nzt-1) + ds/dz'
601	ENDIF
602	WRITE ( io, 301 ) 's', runten, roben
603	ENDIF
604
605	IF ( use_surface_fluxes ) THEN
606	WRITE ( io, 303 )
607	IF ( constant_heatflux ) THEN
608	WRITE ( io, 306 ) surface_heatflux
609	IF ( random_heatflux ) WRITE ( io, 307 )
610	ENDIF
611	IF ( humidity .AND. constant_waterflux ) THEN
612	WRITE ( io, 311 ) surface_waterflux
613	ENDIF
614	IF ( passive_scalar .AND. constant_waterflux ) THEN
615	WRITE ( io, 313 ) surface_waterflux
616	ENDIF
617	ENDIF
618
619	IF ( use_top_fluxes ) THEN
620	WRITE ( io, 304 )
621	IF ( coupling_mode == 'uncoupled' ) THEN
622	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
623	IF ( constant_top_heatflux ) THEN
624	WRITE ( io, 306 ) top_heatflux
625	ENDIF
626	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
627	WRITE ( io, 316 )
628	ENDIF
629	IF ( ocean .AND. constant_top_salinityflux ) THEN
630	WRITE ( io, 309 ) top_salinityflux
631	ENDIF
632	IF ( humidity .OR. passive_scalar ) THEN
633	WRITE ( io, 315 )
634	ENDIF
635	ENDIF
636
637	IF ( prandtl_layer ) THEN
638	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
639	rif_min, rif_max
640	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
641	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
642	WRITE ( io, 312 )
643	ENDIF
644	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
645	WRITE ( io, 314 )
646	ENDIF
647	ELSE
648	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
649	WRITE ( io, 310 ) rif_min, rif_max
650	ENDIF
651	ENDIF
652
653	WRITE ( io, 317 ) bc_lr, bc_ns
654	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
655	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
656	IF ( turbulent_inflow ) THEN
657	WRITE ( io, 319 ) recycling_width, recycling_plane, &
658	inflow_damping_height, inflow_damping_width
659	ENDIF
660	ENDIF
661
662	!
663	!-- Listing of 1D-profiles
664	WRITE ( io, 325 ) dt_dopr_listing
665	IF ( averaging_interval_pr /= 0.0 ) THEN
666	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
667	ENDIF
668
669	!
670	!-- DATA output
671	WRITE ( io, 330 )
672	IF ( averaging_interval_pr /= 0.0 ) THEN
673	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
674	ENDIF
675
676	!
677	!-- 1D-profiles
678	dopr_chr = 'Profile:'
679	IF ( dopr_n /= 0 ) THEN
680	WRITE ( io, 331 )
681
682	output_format = ''
683	IF ( netcdf_output ) THEN
684	IF ( netcdf_64bit ) THEN
685	output_format = 'netcdf (64 bit offset)'
686	ELSE
687	output_format = 'netcdf'
688	ENDIF
689	ENDIF
690	IF ( profil_output ) THEN
691	IF ( netcdf_output ) THEN
692	output_format = TRIM( output_format ) // ' and profil'
693	ELSE
694	output_format = 'profil'
695	ENDIF
696	ENDIF
697	WRITE ( io, 344 ) output_format
698
699	DO i = 1, dopr_n
700	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
701	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
702	WRITE ( io, 332 ) dopr_chr
703	dopr_chr = ' :'
704	ENDIF
705	ENDDO
706
707	IF ( dopr_chr /= '' ) THEN
708	WRITE ( io, 332 ) dopr_chr
709	ENDIF
710	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
711	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
712	ENDIF
713
714	!
715	!-- 2D-arrays
716	DO av = 0, 1
717
718	i = 1
719	do2d_xy = ''
720	do2d_xz = ''
721	do2d_yz = ''
722	DO WHILE ( do2d(av,i) /= ' ' )
723
724	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
725	do2d_mode = do2d(av,i)(l-1:l)
726
727	SELECT CASE ( do2d_mode )
728	CASE ( 'xy' )
729	ll = LEN_TRIM( do2d_xy )
730	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
731	CASE ( 'xz' )
732	ll = LEN_TRIM( do2d_xz )
733	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
734	CASE ( 'yz' )
735	ll = LEN_TRIM( do2d_yz )
736	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
737	END SELECT
738
739	i = i + 1
740
741	ENDDO
742
743	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
744	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
745	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
746	( netcdf_output .OR. iso2d_output ) ) THEN
747
748	IF ( av == 0 ) THEN
749	WRITE ( io, 334 ) ''
750	ELSE
751	WRITE ( io, 334 ) '(time-averaged)'
752	ENDIF
753
754	IF ( do2d_at_begin ) THEN
755	begin_chr = 'and at the start'
756	ELSE
757	begin_chr = ''
758	ENDIF
759
760	output_format = ''
761	IF ( netcdf_output ) THEN
762	IF ( netcdf_64bit ) THEN
763	output_format = 'netcdf (64 bit offset)'
764	ELSE
765	output_format = 'netcdf'
766	ENDIF
767	ENDIF
768	IF ( iso2d_output ) THEN
769	IF ( netcdf_output ) THEN
770	output_format = TRIM( output_format ) // ' and iso2d'
771	ELSE
772	output_format = 'iso2d'
773	ENDIF
774	ENDIF
775	WRITE ( io, 344 ) output_format
776
777	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
778	i = 1
779	slices = '/'
780	coordinates = '/'
781	!
782	!-- Building strings with index and coordinate informations of the
783	!-- slices
784	DO WHILE ( section(i,1) /= -9999 )
785
786	WRITE (section_chr,'(I5)') section(i,1)
787	section_chr = ADJUSTL( section_chr )
788	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
789
790	IF ( section(i,1) == -1 ) THEN
791	WRITE (coor_chr,'(F10.1)') -1.0
792	ELSE
793	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
794	ENDIF
795	coor_chr = ADJUSTL( coor_chr )
796	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
797
798	i = i + 1
799	ENDDO
800	IF ( av == 0 ) THEN
801	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
802	TRIM( begin_chr ), 'k', TRIM( slices ), &
803	TRIM( coordinates )
804	IF ( skip_time_do2d_xy /= 0.0 ) THEN
805	WRITE ( io, 339 ) skip_time_do2d_xy
806	ENDIF
807	ELSE
808	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
809	TRIM( begin_chr ), averaging_interval, &
810	dt_averaging_input, 'k', TRIM( slices ), &
811	TRIM( coordinates )
812	IF ( skip_time_data_output_av /= 0.0 ) THEN
813	WRITE ( io, 339 ) skip_time_data_output_av
814	ENDIF
815	ENDIF
816
817	ENDIF
818
819	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
820	i = 1
821	slices = '/'
822	coordinates = '/'
823	!
824	!-- Building strings with index and coordinate informations of the
825	!-- slices
826	DO WHILE ( section(i,2) /= -9999 )
827
828	WRITE (section_chr,'(I5)') section(i,2)
829	section_chr = ADJUSTL( section_chr )
830	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
831
832	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
833	coor_chr = ADJUSTL( coor_chr )
834	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
835
836	i = i + 1
837	ENDDO
838	IF ( av == 0 ) THEN
839	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
840	TRIM( begin_chr ), 'j', TRIM( slices ), &
841	TRIM( coordinates )
842	IF ( skip_time_do2d_xz /= 0.0 ) THEN
843	WRITE ( io, 339 ) skip_time_do2d_xz
844	ENDIF
845	ELSE
846	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
847	TRIM( begin_chr ), averaging_interval, &
848	dt_averaging_input, 'j', TRIM( slices ), &
849	TRIM( coordinates )
850	IF ( skip_time_data_output_av /= 0.0 ) THEN
851	WRITE ( io, 339 ) skip_time_data_output_av
852	ENDIF
853	ENDIF
854	ENDIF
855
856	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
857	i = 1
858	slices = '/'
859	coordinates = '/'
860	!
861	!-- Building strings with index and coordinate informations of the
862	!-- slices
863	DO WHILE ( section(i,3) /= -9999 )
864
865	WRITE (section_chr,'(I5)') section(i,3)
866	section_chr = ADJUSTL( section_chr )
867	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
868
869	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
870	coor_chr = ADJUSTL( coor_chr )
871	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
872
873	i = i + 1
874	ENDDO
875	IF ( av == 0 ) THEN
876	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
877	TRIM( begin_chr ), 'i', TRIM( slices ), &
878	TRIM( coordinates )
879	IF ( skip_time_do2d_yz /= 0.0 ) THEN
880	WRITE ( io, 339 ) skip_time_do2d_yz
881	ENDIF
882	ELSE
883	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
884	TRIM( begin_chr ), averaging_interval, &
885	dt_averaging_input, 'i', TRIM( slices ), &
886	TRIM( coordinates )
887	IF ( skip_time_data_output_av /= 0.0 ) THEN
888	WRITE ( io, 339 ) skip_time_data_output_av
889	ENDIF
890	ENDIF
891	ENDIF
892
893	ENDIF
894
895	ENDDO
896
897	!
898	!-- 3d-arrays
899	DO av = 0, 1
900
901	i = 1
902	do3d_chr = ''
903	DO WHILE ( do3d(av,i) /= ' ' )
904
905	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
906	i = i + 1
907
908	ENDDO
909
910	IF ( do3d_chr /= '' ) THEN
911	IF ( av == 0 ) THEN
912	WRITE ( io, 336 ) ''
913	ELSE
914	WRITE ( io, 336 ) '(time-averaged)'
915	ENDIF
916
917	output_format = ''
918	IF ( netcdf_output ) THEN
919	IF ( netcdf_64bit_3d ) THEN
920	output_format = 'netcdf (64 bit offset)'
921	ELSE
922	output_format = 'netcdf'
923	ENDIF
924	ENDIF
925	IF ( avs_output ) THEN
926	IF ( netcdf_output ) THEN
927	output_format = TRIM( output_format ) // ' and avs'
928	ELSE
929	output_format = 'avs'
930	ENDIF
931	ENDIF
932	WRITE ( io, 344 ) output_format
933
934	IF ( do3d_at_begin ) THEN
935	begin_chr = 'and at the start'
936	ELSE
937	begin_chr = ''
938	ENDIF
939	IF ( av == 0 ) THEN
940	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
941	zu(nz_do3d), nz_do3d
942	ELSE
943	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
944	TRIM( begin_chr ), averaging_interval, &
945	dt_averaging_input, zu(nz_do3d), nz_do3d
946	ENDIF
947
948	IF ( do3d_compress ) THEN
949	do3d_chr = ''
950	i = 1
951	DO WHILE ( do3d(av,i) /= ' ' )
952
953	SELECT CASE ( do3d(av,i) )
954	CASE ( 'u' )
955	j = 1
956	CASE ( 'v' )
957	j = 2
958	CASE ( 'w' )
959	j = 3
960	CASE ( 'p' )
961	j = 4
962	CASE ( 'pt' )
963	j = 5
964	END SELECT
965	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
966	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
967	':' // prec // ','
968	i = i + 1
969
970	ENDDO
971	WRITE ( io, 338 ) do3d_chr
972
973	ENDIF
974
975	IF ( av == 0 ) THEN
976	IF ( skip_time_do3d /= 0.0 ) THEN
977	WRITE ( io, 339 ) skip_time_do3d
978	ENDIF
979	ELSE
980	IF ( skip_time_data_output_av /= 0.0 ) THEN
981	WRITE ( io, 339 ) skip_time_data_output_av
982	ENDIF
983	ENDIF
984
985	ENDIF
986
987	ENDDO
988
989	!
990	!-- Timeseries
991	IF ( dt_dots /= 9999999.9 ) THEN
992	WRITE ( io, 340 )
993
994	output_format = ''
995	IF ( netcdf_output ) THEN
996	IF ( netcdf_64bit ) THEN
997	output_format = 'netcdf (64 bit offset)'
998	ELSE
999	output_format = 'netcdf'
1000	ENDIF
1001	ENDIF
1002	IF ( profil_output ) THEN
1003	IF ( netcdf_output ) THEN
1004	output_format = TRIM( output_format ) // ' and profil'
1005	ELSE
1006	output_format = 'profil'
1007	ENDIF
1008	ENDIF
1009	WRITE ( io, 344 ) output_format
1010	WRITE ( io, 341 ) dt_dots
1011	ENDIF
1012
1013	#if defined( __dvrp_graphics )
1014	!
1015	!-- Dvrp-output
1016	IF ( dt_dvrp /= 9999999.9 ) THEN
1017	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1018	TRIM( dvrp_username ), TRIM( dvrp_directory )
1019	i = 1
1020	l = 0
1021	m = 0
1022	DO WHILE ( mode_dvrp(i) /= ' ' )
1023	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1024	READ ( mode_dvrp(i), '(10X,I2)' ) j
1025	l = l + 1
1026	IF ( do3d(0,j) /= ' ' ) THEN
1027	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1028	isosurface_color(:,l)
1029	ENDIF
1030	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1031	READ ( mode_dvrp(i), '(6X,I2)' ) j
1032	m = m + 1
1033	IF ( do2d(0,j) /= ' ' ) THEN
1034	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1035	slicer_range_limits_dvrp(:,m)
1036	ENDIF
1037	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1038	WRITE ( io, 363 ) dvrp_psize
1039	IF ( particle_dvrpsize /= 'none' ) THEN
1040	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1041	dvrpsize_interval
1042	ENDIF
1043	IF ( particle_color /= 'none' ) THEN
1044	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1045	color_interval
1046	ENDIF
1047	ENDIF
1048	i = i + 1
1049	ENDDO
1050
1051	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1052	superelevation_y, superelevation, clip_dvrp_l, &
1053	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1054
1055	IF ( TRIM( topography ) /= 'flat' ) THEN
1056	WRITE ( io, 366 ) topography_color
1057	IF ( cluster_size > 1 ) THEN
1058	WRITE ( io, 367 ) cluster_size
1059	ENDIF
1060	ENDIF
1061
1062	ENDIF
1063	#endif
1064
1065	#if defined( __spectra )
1066	!
1067	!-- Spectra output
1068	IF ( dt_dosp /= 9999999.9 ) THEN
1069	WRITE ( io, 370 )
1070
1071	output_format = ''
1072	IF ( netcdf_output ) THEN
1073	IF ( netcdf_64bit ) THEN
1074	output_format = 'netcdf (64 bit offset)'
1075	ELSE
1076	output_format = 'netcdf'
1077	ENDIF
1078	ENDIF
1079	IF ( profil_output ) THEN
1080	IF ( netcdf_output ) THEN
1081	output_format = TRIM( output_format ) // ' and profil'
1082	ELSE
1083	output_format = 'profil'
1084	ENDIF
1085	ENDIF
1086	WRITE ( io, 344 ) output_format
1087	WRITE ( io, 371 ) dt_dosp
1088	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1089	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1090	( spectra_direction(i), i = 1,10 ), &
1091	( comp_spectra_level(i), i = 1,100 ), &
1092	( plot_spectra_level(i), i = 1,100 ), &
1093	averaging_interval_sp, dt_averaging_input_pr
1094	ENDIF
1095	#endif
1096
1097	WRITE ( io, 99 )
1098
1099	!
1100	!-- Physical quantities
1101	WRITE ( io, 400 )
1102
1103	!
1104	!-- Geostrophic parameters
1105	WRITE ( io, 410 ) omega, phi, f, fs
1106
1107	!
1108	!-- Other quantities
1109	WRITE ( io, 411 ) g
1110	IF ( use_reference ) THEN
1111	IF ( ocean ) THEN
1112	WRITE ( io, 412 ) prho_reference
1113	ELSE
1114	WRITE ( io, 413 ) pt_reference
1115	ENDIF
1116	ENDIF
1117
1118	!
1119	!-- Cloud physics parameters
1120	IF ( cloud_physics ) THEN
1121	WRITE ( io, 415 )
1122	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1123	ENDIF
1124
1125	!-- Profile of the geostrophic wind (component ug)
1126	!-- Building output strings
1127	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1128	gradients = '------'
1129	slices = ' 0'
1130	coordinates = ' 0.0'
1131	i = 1
1132	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1133
1134	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1135	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1136
1137	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1138	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1139
1140	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1141	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1142
1143	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1144	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1145
1146	i = i + 1
1147	ENDDO
1148
1149	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1150	TRIM( gradients ), TRIM( slices )
1151
1152	!-- Profile of the geostrophic wind (component vg)
1153	!-- Building output strings
1154	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1155	gradients = '------'
1156	slices = ' 0'
1157	coordinates = ' 0.0'
1158	i = 1
1159	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1160
1161	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1162	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1163
1164	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1165	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1166
1167	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1168	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1169
1170	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1171	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1172
1173	i = i + 1
1174	ENDDO
1175
1176	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1177	TRIM( gradients ), TRIM( slices )
1178
1179	!
1180	!-- Initial temperature profile
1181	!-- Building output strings, starting with surface temperature
1182	WRITE ( temperatures, '(F6.2)' ) pt_surface
1183	gradients = '------'
1184	slices = ' 0'
1185	coordinates = ' 0.0'
1186	i = 1
1187	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1188
1189	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1190	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1191
1192	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1193	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1194
1195	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1196	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1197
1198	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1199	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1200
1201	i = i + 1
1202	ENDDO
1203
1204	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1205	TRIM( gradients ), TRIM( slices )
1206
1207	!
1208	!-- Initial humidity profile
1209	!-- Building output strings, starting with surface humidity
1210	IF ( humidity .OR. passive_scalar ) THEN
1211	WRITE ( temperatures, '(E8.1)' ) q_surface
1212	gradients = '--------'
1213	slices = ' 0'
1214	coordinates = ' 0.0'
1215	i = 1
1216	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1217
1218	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1219	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1220
1221	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1222	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1223
1224	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1225	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1226
1227	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1228	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1229
1230	i = i + 1
1231	ENDDO
1232
1233	IF ( humidity ) THEN
1234	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1235	TRIM( gradients ), TRIM( slices )
1236	ELSE
1237	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1238	TRIM( gradients ), TRIM( slices )
1239	ENDIF
1240	ENDIF
1241
1242	!
1243	!-- Initial salinity profile
1244	!-- Building output strings, starting with surface salinity
1245	IF ( ocean ) THEN
1246	WRITE ( temperatures, '(F6.2)' ) sa_surface
1247	gradients = '------'
1248	slices = ' 0'
1249	coordinates = ' 0.0'
1250	i = 1
1251	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1252
1253	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1254	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1255
1256	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1257	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1258
1259	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1260	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1261
1262	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1263	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1264
1265	i = i + 1
1266	ENDDO
1267
1268	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1269	TRIM( gradients ), TRIM( slices )
1270	ENDIF
1271
1272	!
1273	!-- LES / turbulence parameters
1274	WRITE ( io, 450 )
1275
1276	!--
1277	! ... LES-constants used must still be added here
1278	!--
1279	IF ( constant_diffusion ) THEN
1280	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1281	prandtl_number
1282	ENDIF
1283	IF ( .NOT. constant_diffusion) THEN
1284	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1285	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1286	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1287	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1288	ENDIF
1289
1290	!
1291	!-- Special actions during the run
1292	WRITE ( io, 470 )
1293	IF ( create_disturbances ) THEN
1294	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1295	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1296	zu(disturbance_level_ind_t), disturbance_level_ind_t
1297	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1298	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1299	ELSE
1300	WRITE ( io, 473 ) disturbance_energy_limit
1301	ENDIF
1302	WRITE ( io, 474 ) TRIM( random_generator )
1303	ENDIF
1304	IF ( pt_surface_initial_change /= 0.0 ) THEN
1305	WRITE ( io, 475 ) pt_surface_initial_change
1306	ENDIF
1307	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1308	WRITE ( io, 476 ) q_surface_initial_change
1309	ENDIF
1310	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1311	WRITE ( io, 477 ) q_surface_initial_change
1312	ENDIF
1313
1314	IF ( particle_advection ) THEN
1315	!
1316	!-- Particle attributes
1317	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1318	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1319	end_time_prel, dt_sort_particles
1320	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1321	IF ( random_start_position ) WRITE ( io, 481 )
1322	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1323	WRITE ( io, 495 ) total_number_of_particles
1324	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1325	WRITE ( io, 483 ) maximum_number_of_tailpoints
1326	IF ( minimum_tailpoint_distance /= 0 ) THEN
1327	WRITE ( io, 484 ) total_number_of_tails, &
1328	minimum_tailpoint_distance, &
1329	maximum_tailpoint_age
1330	ENDIF
1331	ENDIF
1332	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1333	WRITE ( io, 485 ) dt_write_particle_data
1334	output_format = ''
1335	IF ( netcdf_output ) THEN
1336	IF ( netcdf_64bit ) THEN
1337	output_format = 'netcdf (64 bit offset) and binary'
1338	ELSE
1339	output_format = 'netcdf and binary'
1340	ENDIF
1341	ELSE
1342	output_format = 'binary'
1343	ENDIF
1344	WRITE ( io, 344 ) output_format
1345	ENDIF
1346	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1347	IF ( write_particle_statistics ) WRITE ( io, 486 )
1348
1349	WRITE ( io, 487 ) number_of_particle_groups
1350
1351	DO i = 1, number_of_particle_groups
1352	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1353	WRITE ( io, 490 ) i, 0.0
1354	WRITE ( io, 492 )
1355	ELSE
1356	WRITE ( io, 490 ) i, radius(i)
1357	IF ( density_ratio(i) /= 0.0 ) THEN
1358	WRITE ( io, 491 ) density_ratio(i)
1359	ELSE
1360	WRITE ( io, 492 )
1361	ENDIF
1362	ENDIF
1363	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1364	pdx(i), pdy(i), pdz(i)
1365	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1366	ENDDO
1367
1368	ENDIF
1369
1370
1371	!
1372	!-- Parameters of 1D-model
1373	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1374	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1375	mixing_length_1d, dissipation_1d
1376	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1377	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1378	ENDIF
1379	ENDIF
1380
1381	!
1382	!-- User-defined informations
1383	CALL user_header( io )
1384
1385	WRITE ( io, 99 )
1386
1387	!
1388	!-- Write buffer contents to disc immediately
1389	CALL local_flush( io )
1390
1391	!
1392	!-- Here the FORMATs start
1393
1394	99 FORMAT (1X,78('-'))
1395	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1396	1X,'* ',A,' *',9X,A/ &
1397	1X,'***************************',9X,42('-'))
1398	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1399	37X,42('-'))
1400	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1401	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1402	' Run on host: ',A10)
1403	#if defined( __parallel )
1404	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1405	')',1X,A)
1406	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1407	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1408	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1409	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1410	37X,'because the job is running on an SMP-cluster')
1411	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1412	#endif
1413	110 FORMAT (/' Numerical Schemes:'/ &
1414	' -----------------'/)
1415	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1416	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1417	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1418	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1419	' or Upstream')
1420	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1421	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1422	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1423	' or Upstream')
1424	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1425	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1426	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1427	' Translation velocity = ',A/ &
1428	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1429	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1430	' of timestep changes)')
1431	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1432	' timestep changes')
1433	122 FORMAT (' --> Time differencing scheme: ',A)
1434	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1435	' maximum damping coefficient: ',F5.3, ' 1/s')
1436	124 FORMAT (' Spline-overshoots are being suppressed')
1437	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1438	' of'/ &
1439	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1440	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1441	' of'/ &
1442	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1443	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1444	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1445	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1446	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1447	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1448	130 FORMAT (' --> Additional prognostic equation for the total water content')
1449	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1450	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1451	' effective emissivity scheme')
1452	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1453	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1454	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1455	A,'-cycle)'/ &
1456	' number of grid levels: ',I2/ &
1457	' Gauss-Seidel red/black iterations: ',I2)
1458	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1459	I3,')')
1460	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1461	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1462	I3,')'/ &
1463	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1464	I3,')')
1465	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1466	139 FORMAT (' --> Loop optimization method: ',A)
1467	140 FORMAT (' maximum residual allowed: ',E10.3)
1468	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1469	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1470	'step')
1471	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1472	'kinetic energy')
1473	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1474	'conserved'/ &
1475	' using the ',A,' mode')
1476	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1477	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1478	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1479	/' starting from dp_level_b =', F8.3, 'm', A /)
1480	200 FORMAT (//' Run time and time step information:'/ &
1481	' ----------------------------------'/)
1482	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1483	' CFL-factor: ',F4.2)
1484	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1485	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1486	' End time: ',F9.3,' s')
1487	204 FORMAT ( A,F9.3,' s')
1488	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1489	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1490	' CPU-time used: ',F9.3,' s per timestep: ', &
1491	' ',F9.3,' s'/ &
1492	' per second of simulated tim', &
1493	'e: ',F9.3,' s')
1494	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1495	250 FORMAT (//' Computational grid and domain size:'/ &
1496	' ----------------------------------'// &
1497	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1498	' m dz = ',F7.3,' m'/ &
1499	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1500	' m z(u) = ',F10.3,' m'/)
1501	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1502	' factor: ',F5.3/ &
1503	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1504	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1505	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1506	255 FORMAT (' Subdomains have equal size')
1507	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1508	'have smaller sizes'/ &
1509	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1510	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1511	' degrees')
1512	270 FORMAT (//' Topography informations:'/ &
1513	' -----------------------'// &
1514	1X,'Topography: ',A)
1515	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1516	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1517	' / ',I4)
1518	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1519	' direction' / &
1520	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1521	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1522	278 FORMAT (' Topography grid definition convention:'/ &
1523	' cell edge (staggered grid points'/ &
1524	' (u in x-direction, v in y-direction))' /)
1525	279 FORMAT (' Topography grid definition convention:'/ &
1526	' cell center (scalar grid points)' /)
1527	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1528	' ------------------------------'// &
1529	' Canopy mode: ', A / &
1530	' Canopy top: ',I4 / &
1531	' Leaf drag coefficient: ',F6.2 /)
1532	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1533	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1534	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1535	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1536	' Height: ',A,' m'/ &
1537	' Leaf area density: ',A,' m2/m3'/ &
1538	' Gradient: ',A,' m2/m4'/ &
1539	' Gridpoint: ',A)
1540
1541	300 FORMAT (//' Boundary conditions:'/ &
1542	' -------------------'// &
1543	' p uv ', &
1544	' pt'// &
1545	' B. bound.: ',A/ &
1546	' T. bound.: ',A)
1547	301 FORMAT (/' ',A// &
1548	' B. bound.: ',A/ &
1549	' T. bound.: ',A)
1550	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1551	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1552	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1553	'computational u,v-level:'// &
1554	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1555	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1556	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1557	307 FORMAT (' Heatflux has a random normal distribution')
1558	308 FORMAT (' Predefined surface temperature')
1559	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1560	310 FORMAT (//' 1D-Model:'// &
1561	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1562	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1563	312 FORMAT (' Predefined surface humidity')
1564	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1565	314 FORMAT (' Predefined scalar value at the surface')
1566	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1567	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1568	'atmosphere model')
1569	317 FORMAT (//' Lateral boundaries:'/ &
1570	' left/right: ',A/ &
1571	' north/south: ',A)
1572	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1573	'max =',F5.1,' m**2/s')
1574	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1575	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1576	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1577	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1578	' v: ',F9.6,' m2/s2')
1579	325 FORMAT (//' List output:'/ &
1580	' -----------'// &
1581	' 1D-Profiles:'/ &
1582	' Output every ',F8.2,' s')
1583	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1584	' Averaging input every ',F8.2,' s')
1585	330 FORMAT (//' Data output:'/ &
1586	' -----------'/)
1587	331 FORMAT (/' 1D-Profiles:')
1588	332 FORMAT (/' ',A)
1589	333 FORMAT (' Output every ',F8.2,' s',/ &
1590	' Time averaged over ',F8.2,' s'/ &
1591	' Averaging input every ',F8.2,' s')
1592	334 FORMAT (/' 2D-Arrays',A,':')
1593	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1594	' Output every ',F8.2,' s ',A/ &
1595	' Cross sections at ',A1,' = ',A/ &
1596	' scalar-coordinates: ',A,' m'/)
1597	336 FORMAT (/' 3D-Arrays',A,':')
1598	337 FORMAT (/' Arrays: ',A/ &
1599	' Output every ',F8.2,' s ',A/ &
1600	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1601	338 FORMAT (' Compressed data output'/ &
1602	' Decimal precision: ',A/)
1603	339 FORMAT (' No output during initial ',F8.2,' s')
1604	340 FORMAT (/' Time series:')
1605	341 FORMAT (' Output every ',F8.2,' s'/)
1606	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1607	' Output every ',F8.2,' s ',A/ &
1608	' Time averaged over ',F8.2,' s'/ &
1609	' Averaging input every ',F8.2,' s'/ &
1610	' Cross sections at ',A1,' = ',A/ &
1611	' scalar-coordinates: ',A,' m'/)
1612	343 FORMAT (/' Arrays: ',A/ &
1613	' Output every ',F8.2,' s ',A/ &
1614	' Time averaged over ',F8.2,' s'/ &
1615	' Averaging input every ',F8.2,' s'/ &
1616	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1617	344 FORMAT (' Output format: ',A/)
1618	#if defined( __dvrp_graphics )
1619	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1620	' Output every ',F7.1,' s'/ &
1621	' Output mode: ',A/ &
1622	' Host / User: ',A,' / ',A/ &
1623	' Directory: ',A// &
1624	' The sequence contains:')
1625	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1626	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1627	362 FORMAT (/' Slicer plane ',A/ &
1628	' Slicer limits: [',F6.2,',',F6.2,']')
1629	363 FORMAT (/' Particles'/ &
1630	' particle size: ',F7.2,' m')
1631	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1632	F6.2,',',F6.2,']')
1633	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1634	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1635	')'/ &
1636	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1637	' from y = ',F9.1,' m to y = ',F9.1,' m')
1638	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1639	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1640	#endif
1641	#if defined( __spectra )
1642	370 FORMAT (' Spectra:')
1643	371 FORMAT (' Output every ',F7.1,' s'/)
1644	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1645	' Directions: ', 10(A5,',')/ &
1646	' height levels k = ', 20(I3,',')/ &
1647	' ', 20(I3,',')/ &
1648	' ', 20(I3,',')/ &
1649	' ', 20(I3,',')/ &
1650	' ', 19(I3,','),I3,'.'/ &
1651	' height levels selected for standard plot:'/ &
1652	' k = ', 20(I3,',')/ &
1653	' ', 20(I3,',')/ &
1654	' ', 20(I3,',')/ &
1655	' ', 20(I3,',')/ &
1656	' ', 19(I3,','),I3,'.'/ &
1657	' Time averaged over ', F7.1, ' s,' / &
1658	' Profiles for the time averaging are taken every ', &
1659	F6.1,' s')
1660	#endif
1661	400 FORMAT (//' Physical quantities:'/ &
1662	' -------------------'/)
1663	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1664	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1665	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1666	' f* = ',F9.6,' 1/s')
1667	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1668	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1669	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1670	415 FORMAT (/' Cloud physics parameters:'/ &
1671	' ------------------------'/)
1672	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1673	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1674	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1675	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1676	' Vapourization heat : L_v = ',E8.2,' J/kg')
1677	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1678	' Height: ',A,' m'/ &
1679	' Temperature: ',A,' K'/ &
1680	' Gradient: ',A,' K/100m'/ &
1681	' Gridpoint: ',A)
1682	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1683	' Height: ',A,' m'/ &
1684	' Humidity: ',A,' kg/kg'/ &
1685	' Gradient: ',A,' (kg/kg)/100m'/ &
1686	' Gridpoint: ',A)
1687	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1688	' Height: ',A,' m'/ &
1689	' Scalar concentration: ',A,' kg/m**3'/ &
1690	' Gradient: ',A,' (kg/m**3)/100m'/ &
1691	' Gridpoint: ',A)
1692	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1693	' Height: ',A,' m'/ &
1694	' ug: ',A,' m/s'/ &
1695	' Gradient: ',A,' 1/100s'/ &
1696	' Gridpoint: ',A)
1697	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1698	' Height: ',A,' m'/ &
1699	' vg: ',A,' m/s'/ &
1700	' Gradient: ',A,' 1/100s'/ &
1701	' Gridpoint: ',A)
1702	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1703	' Height: ',A,' m'/ &
1704	' Salinity: ',A,' psu'/ &
1705	' Gradient: ',A,' psu/100m'/ &
1706	' Gridpoint: ',A)
1707	450 FORMAT (//' LES / Turbulence quantities:'/ &
1708	' ---------------------------'/)
1709	451 FORMAT (' Diffusion coefficients are constant:'/ &
1710	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1711	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1712	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1713	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1714	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1715	470 FORMAT (//' Actions during the simulation:'/ &
1716	' -----------------------------'/)
1717	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1718	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1719	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1720	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1721	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1722	' to i/j =',I4)
1723	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1724	1X,F5.3, ' m2/s2')
1725	474 FORMAT (' Random number generator used : ',A/)
1726	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1727	'respectively, if'/ &
1728	' the value is negative) by ',F5.2,' K at the beginning of the',&
1729	' 3D-simulation'/)
1730	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1731	'respectively, if the'/ &
1732	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1733	' the 3D-simulation'/)
1734	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1735	'respectively, if the'/ &
1736	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1737	' the 3D-simulation'/)
1738	480 FORMAT (' Particles:'/ &
1739	' ---------'// &
1740	' Particle advection is active (switched on at t = ', F7.1, &
1741	' s)'/ &
1742	' Start of new particle generations every ',F6.1,' s'/ &
1743	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1744	' bottom: ', A, ' top: ', A/&
1745	' Maximum particle age: ',F9.1,' s'/ &
1746	' Advection stopped at t = ',F9.1,' s'/ &
1747	' Particles are sorted every ',F9.1,' s'/)
1748	481 FORMAT (' Particles have random start positions'/)
1749	482 FORMAT (' Particles are advected only horizontally'/)
1750	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1751	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1752	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1753	' Maximum age of the end of the tail: ',F8.2,' s')
1754	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1755	486 FORMAT (' Particle statistics are written on file'/)
1756	487 FORMAT (' Number of particle groups: ',I2/)
1757	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1758	' minimum timestep for advection: ', F7.5/)
1759	489 FORMAT (' Number of particles simultaneously released at each ', &
1760	'point: ', I5/)
1761	490 FORMAT (' Particle group ',I2,':'/ &
1762	' Particle radius: ',E10.3, 'm')
1763	491 FORMAT (' Particle inertia is activated'/ &
1764	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1765	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1766	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1767	' y:',F8.1,' - ',F8.1,' m'/&
1768	' z:',F8.1,' - ',F8.1,' m'/&
1769	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1770	' m dz = ',F8.1,' m'/)
1771	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1772	F8.2,' s'/)
1773	495 FORMAT (' Number of particles in total domain: ',I10/)
1774	500 FORMAT (//' 1D-Model parameters:'/ &
1775	' -------------------'// &
1776	' Simulation time: ',F8.1,' s'/ &
1777	' Run-controll output every: ',F8.1,' s'/ &
1778	' Vertical profile output every: ',F8.1,' s'/ &
1779	' Mixing length calculation: ',A/ &
1780	' Dissipation calculation: ',A/)
1781	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1782
1783
1784	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |