Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 29

Last change on this file since 29 was 19, checked in by raasch, 18 years ago
preliminary version of modified boundary conditions at top
Property svn:keywords set to `Id`
File size: 54.3 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 19 2007-02-23 04:53:48Z raasch $
11	! RCS Log replace by Id keyword, revision history cleaned up
12	!
13	! Revision 1.63 2006/08/22 13:53:13 raasch
14	! Output of dz_max
15	!
16	! Revision 1.1 1997/08/11 06:17:20 raasch
17	! Initial revision
18	!
19	!
20	! Description:
21	! ------------
22	! Writing a header with all important informations about the actual run.
23	! This subroutine is called three times, two times at the beginning
24	! (writing information on files RUN_CONTROL and HEADER) and one time at the
25	! end of the run, then writing additional information about CPU-usage on file
26	! header.
27	!------------------------------------------------------------------------------!
28
29	USE arrays_3d
30	USE control_parameters
31	USE cloud_parameters
32	USE cpulog
33	USE dvrp_variables
34	USE grid_variables
35	USE indices
36	USE model_1d
37	USE particle_attributes
38	USE pegrid
39	USE spectrum
40
41	IMPLICIT NONE
42
43	CHARACTER (LEN=1) :: prec
44	CHARACTER (LEN=2) :: do2d_mode
45	CHARACTER (LEN=5) :: section_chr
46	CHARACTER (LEN=9) :: time_to_string
47	CHARACTER (LEN=10) :: coor_chr, host_chr
48	CHARACTER (LEN=16) :: begin_chr
49	CHARACTER (LEN=40) :: output_format
50	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
51	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
52	run_classification, slices, temperatures, &
53	ugcomponent, vgcomponent
54	CHARACTER (LEN=85) :: roben, runten
55
56	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
57	REAL :: cpuseconds_per_simulated_second
58
59	!
60	!-- Open the output file. At the end of the simulation, output is directed
61	!-- to unit 19.
62	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
63	.NOT. simulated_time_at_begin /= simulated_time ) THEN
64	io = 15 ! header output on file RUN_CONTROL
65	ELSE
66	io = 19 ! header output on file HEADER
67	ENDIF
68	CALL check_open( io )
69
70	!
71	!-- At the end of the run, output file (HEADER) will be rewritten with
72	!-- new informations
73	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
74
75	!
76	!-- Determine kind of model run
77	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
78	run_classification = '3D - restart run'
79	ELSE
80	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
81	run_classification = '3D - run without 1D - prerun'
82	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
83	run_classification = '3D - run with 1D - prerun'
84	ELSE
85	PRINT*,'+++ header: unknown action(s): ',initializing_actions
86	ENDIF
87	ENDIF
88
89	!
90	!-- Run-identification, date, time, host
91	host_chr = host(1:10)
92	WRITE ( io, 100 ) version, TRIM( run_classification ), run_date, &
93	run_identifier, run_time, runnr, ADJUSTR( host_chr )
94	#if defined( __parallel )
95	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
96	char1 = 'calculated'
97	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
98	host(1:2) == 'lc' ) .AND. &
99	npex == -1 .AND. pdims(2) == 1 ) THEN
100	char1 = 'forced'
101	ELSE
102	char1 = 'predefined'
103	ENDIF
104	IF ( threads_per_task == 1 ) THEN
105	WRITE ( io, 101 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
106	ELSE
107	WRITE ( io, 102 ) numprocs*threads_per_task, numprocs, &
108	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
109	ENDIF
110	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
111	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
112	npex == -1 .AND. pdims(2) == 1 ) &
113	THEN
114	WRITE ( io, 104 )
115	ELSEIF ( pdims(2) == 1 ) THEN
116	WRITE ( io, 105 ) 'x'
117	ELSEIF ( pdims(1) == 1 ) THEN
118	WRITE ( io, 105 ) 'y'
119	ENDIF
120	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 103 )
121	#endif
122	WRITE ( io, 99 )
123
124	!
125	!-- Numerical schemes
126	WRITE ( io, 110 )
127	IF ( psolver(1:7) == 'poisfft' ) THEN
128	WRITE ( io, 111 ) TRIM( fft_method )
129	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
130	ELSEIF ( psolver == 'sor' ) THEN
131	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
132	ELSEIF ( psolver == 'multigrid' ) THEN
133	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
134	IF ( mg_cycles == -1 ) THEN
135	WRITE ( io, 140 ) residual_limit
136	ELSE
137	WRITE ( io, 141 ) mg_cycles
138	ENDIF
139	IF ( mg_switch_to_pe0_level == 0 ) THEN
140	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
141	nzt_mg(1)
142	ELSE
143	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
144	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
145	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
146	nzt_mg(mg_switch_to_pe0_level), &
147	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
148	nzt_mg(1)
149	ENDIF
150	ENDIF
151	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
152	THEN
153	WRITE ( io, 142 )
154	ENDIF
155
156	IF ( momentum_advec == 'pw-scheme' ) THEN
157	WRITE ( io, 113 )
158	ELSE
159	WRITE ( io, 114 )
160	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
161	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
162	overshoot_limit_w /= 0.0 ) THEN
163	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
164	overshoot_limit_w
165	ENDIF
166	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
167	ups_limit_w /= 0.0 ) &
168	THEN
169	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
170	ENDIF
171	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
172	ENDIF
173	IF ( scalar_advec == 'pw-scheme' ) THEN
174	WRITE ( io, 116 )
175	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
176	WRITE ( io, 117 )
177	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
178	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
179	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
180	ENDIF
181	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
182	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
183	ENDIF
184	ELSE
185	WRITE ( io, 118 )
186	ENDIF
187	IF ( momentum_advec /= 'ups-scheme' .AND. scalar_advec /= 'ups-scheme' &
188	.AND. scalar_advec /= 'bc-scheme' .AND. host(1:3) /= 'nec' ) THEN
189	WRITE ( io, 139 )
190	ENDIF
191	IF ( galilei_transformation ) THEN
192	IF ( use_ug_for_galilei_tr ) THEN
193	char1 = 'geostrophic wind'
194	ELSE
195	char1 = 'mean wind in model domain'
196	ENDIF
197	IF ( simulated_time_at_begin == simulated_time ) THEN
198	char2 = 'at the start of the run'
199	ELSE
200	char2 = 'at the end of the run'
201	ENDIF
202	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
203	advected_distance_x/1000.0, advected_distance_y/1000.0
204	ENDIF
205	IF ( timestep_scheme == 'leapfrog' ) THEN
206	WRITE ( io, 120 )
207	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
208	WRITE ( io, 121 )
209	ELSE
210	WRITE ( io, 122 ) timestep_scheme
211	ENDIF
212	IF ( rayleigh_damping_factor /= 0.0 ) THEN
213	WRITE ( io, 123 ) rayleigh_damping_height, rayleigh_damping_factor
214	ENDIF
215	IF ( moisture ) THEN
216	IF ( .NOT. cloud_physics ) THEN
217	WRITE ( io, 129 )
218	ELSE
219	WRITE ( io, 130 )
220	WRITE ( io, 131 )
221	IF ( radiation ) WRITE ( io, 132 )
222	IF ( precipitation ) WRITE ( io, 133 )
223	ENDIF
224	ENDIF
225	IF ( passive_scalar ) WRITE ( io, 134 )
226	IF ( conserve_volume_flow ) WRITE ( io, 150 )
227	WRITE ( io, 99 )
228
229	!
230	!-- Runtime and timestep informations
231	WRITE ( io, 200 )
232	IF ( .NOT. dt_fixed ) THEN
233	WRITE ( io, 201 ) dt_max, cfl_factor
234	ELSE
235	WRITE ( io, 202 ) dt
236	ENDIF
237	WRITE ( io, 203 ) simulated_time_at_begin, end_time
238
239	IF ( time_restart /= 9999999.9 .AND. &
240	simulated_time_at_begin == simulated_time ) THEN
241	IF ( dt_restart == 9999999.9 ) THEN
242	WRITE ( io, 204 ) ' Restart at: ',time_restart
243	ELSE
244	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
245	ENDIF
246	ENDIF
247
248	IF ( simulated_time_at_begin /= simulated_time ) THEN
249	i = MAX ( log_point_s(10)%counts, 1 )
250	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
251	cpuseconds_per_simulated_second = 0.0
252	ELSE
253	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
254	( simulated_time - &
255	simulated_time_at_begin )
256	ENDIF
257	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
258	log_point_s(10)%sum / REAL( i ), &
259	cpuseconds_per_simulated_second
260	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
261	IF ( dt_restart == 9999999.9 ) THEN
262	WRITE ( io, 204 ) ' Next restart at: ',time_restart
263	ELSE
264	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
265	ENDIF
266	ENDIF
267	ENDIF
268
269	!
270	!-- Computational grid
271	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
272	IF ( dz_stretch_level_index < nzt+1 ) THEN
273	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
274	dz_stretch_factor, dz_max
275	ENDIF
276	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
277	MIN( nnz+2, nzt+2 )
278	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
279	WRITE ( io, 255 )
280	ELSE
281	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
282	ENDIF
283	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
284
285	!
286	!-- Topography
287	WRITE ( io, 270 ) topography
288	SELECT CASE ( TRIM( topography ) )
289
290	CASE ( 'flat' )
291	! no actions necessary
292
293	CASE ( 'single_building' )
294	blx = INT( building_length_x / dx )
295	bly = INT( building_length_y / dy )
296	bh = INT( building_height / dz )
297
298	IF ( building_wall_left == 9999999.9 ) THEN
299	building_wall_left = ( nx + 1 - blx ) / 2 * dx
300	ENDIF
301	bxl = INT ( building_wall_left / dx + 0.5 )
302	bxr = bxl + blx
303
304	IF ( building_wall_south == 9999999.9 ) THEN
305	building_wall_south = ( ny + 1 - bly ) / 2 * dy
306	ENDIF
307	bys = INT ( building_wall_south / dy + 0.5 )
308	byn = bys + bly
309
310	WRITE ( io, 271 ) building_length_x, building_length_y, &
311	building_height, bxl, bxr, bys, byn
312
313	END SELECT
314
315	!
316	!-- Boundary conditions
317	IF ( ibc_p_b == 0 ) THEN
318	runten = 'p(0) = 0 \|'
319	ELSEIF ( ibc_p_b == 1 ) THEN
320	runten = 'p(0) = p(1) \|'
321	ELSE
322	runten = 'p(0) = p(1) +R\|'
323	ENDIF
324	IF ( ibc_p_t == 0 ) THEN
325	roben = 'p(nzt+1) = 0 \|'
326	ELSE
327	roben = 'p(nzt+1) = p(nzt) \|'
328	ENDIF
329
330	IF ( ibc_uv_b == 0 ) THEN
331	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
332	ELSE
333	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
334	ENDIF
335	IF ( ibc_uv_t == 0 ) THEN
336	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
337	ELSE
338	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
339	ENDIF
340
341	IF ( ibc_pt_b == 0 ) THEN
342	runten = TRIM( runten ) // ' pt(0) = pt_surface'
343	ELSE
344	runten = TRIM( runten ) // ' pt(0) = pt(1)'
345	ENDIF
346	IF ( ibc_pt_t == 0 ) THEN
347	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
348	ELSEIF( ibc_pt_t == 1 ) THEN
349	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
350	ELSEIF( ibc_pt_t == 2 ) THEN
351	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
352	ENDIF
353
354	WRITE ( io, 300 ) runten, roben
355
356	IF ( .NOT. constant_diffusion ) THEN
357	IF ( ibc_e_b == 1 ) THEN
358	runten = 'e(0) = e(1)'
359	ELSE
360	runten = 'e(0) = e(1) = (u/0.1)*2'
361	ENDIF
362	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
363
364	WRITE ( io, 301 ) runten, roben
365
366	ENDIF
367
368	IF ( moisture .OR. passive_scalar ) THEN
369	IF ( moisture ) THEN
370	IF ( ibc_q_b == 0 ) THEN
371	runten = 'q(0) = q_surface'
372	ELSE
373	runten = 'q(0) = q(1)'
374	ENDIF
375	IF ( ibc_q_t == 0 ) THEN
376	roben = 'q(nzt) = q_top'
377	ELSE
378	roben = 'q(nzt) = q(nzt-1) + dq/dz'
379	ENDIF
380	ELSE
381	IF ( ibc_q_b == 0 ) THEN
382	runten = 's(0) = s_surface'
383	ELSE
384	runten = 's(0) = s(1)'
385	ENDIF
386	IF ( ibc_q_t == 0 ) THEN
387	roben = 's(nzt) = s_top'
388	ELSE
389	roben = 's(nzt) = s(nzt-1) + ds/dz'
390	ENDIF
391	ENDIF
392
393	WRITE ( io, 302 ) runten, roben
394
395	ENDIF
396
397	IF ( use_surface_fluxes ) THEN
398	WRITE ( io, 303 )
399	IF ( constant_heatflux ) THEN
400	WRITE ( io, 306 ) surface_heatflux
401	IF ( random_heatflux ) WRITE ( io, 307 )
402	ENDIF
403	IF ( moisture .AND. constant_waterflux ) THEN
404	WRITE ( io, 311 ) surface_waterflux
405	ENDIF
406	IF ( passive_scalar .AND. constant_waterflux ) THEN
407	WRITE ( io, 313 ) surface_waterflux
408	ENDIF
409	ENDIF
410
411	IF ( use_top_fluxes ) THEN
412	WRITE ( io, 304 )
413	IF ( constant_top_heatflux ) THEN
414	WRITE ( io, 306 ) top_heatflux
415	ENDIF
416	IF ( moisture .OR. passive_scalar ) THEN
417	WRITE ( io, 315 )
418	ENDIF
419	ENDIF
420
421	IF ( prandtl_layer ) THEN
422	WRITE ( io, 305 ) zu(1), roughness_length, kappa, rif_min, rif_max
423	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
424	IF ( moisture .AND. .NOT. constant_waterflux ) THEN
425	WRITE ( io, 312 )
426	ENDIF
427	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
428	WRITE ( io, 314 )
429	ENDIF
430	ELSE
431	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
432	WRITE ( io, 310 ) rif_min, rif_max
433	ENDIF
434	ENDIF
435
436	WRITE ( io, 317 ) bc_lr, bc_ns
437	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
438	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
439	ENDIF
440
441	!
442	!-- Listing of 1D-profiles
443	WRITE ( io, 320 ) dt_dopr_listing
444	IF ( averaging_interval_pr /= 0.0 ) THEN
445	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
446	ENDIF
447
448	!
449	!-- DATA output
450	WRITE ( io, 330 )
451	IF ( averaging_interval_pr /= 0.0 ) THEN
452	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
453	ENDIF
454
455	!
456	!-- 1D-profiles
457	dopr_chr = 'Profile:'
458	IF ( dopr_n /= 0 ) THEN
459	WRITE ( io, 331 )
460
461	output_format = ''
462	IF ( netcdf_output ) THEN
463	IF ( netcdf_64bit ) THEN
464	output_format = 'netcdf (64 bit offset)'
465	ELSE
466	output_format = 'netcdf'
467	ENDIF
468	ENDIF
469	IF ( profil_output ) THEN
470	IF ( netcdf_output ) THEN
471	output_format = TRIM( output_format ) // ' and profil'
472	ELSE
473	output_format = 'profil'
474	ENDIF
475	ENDIF
476	WRITE ( io, 345 ) output_format
477
478	DO i = 1, dopr_n
479	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
480	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
481	WRITE ( io, 332 ) dopr_chr
482	dopr_chr = ' :'
483	ENDIF
484	ENDDO
485
486	IF ( dopr_chr /= '' ) THEN
487	WRITE ( io, 332 ) dopr_chr
488	ENDIF
489	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
490	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
491	ENDIF
492
493	!
494	!-- 2D-arrays
495	DO av = 0, 1
496
497	i = 1
498	do2d_xy = ''
499	do2d_xz = ''
500	do2d_yz = ''
501	DO WHILE ( do2d(av,i) /= ' ' )
502
503	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
504	do2d_mode = do2d(av,i)(l-1:l)
505
506	SELECT CASE ( do2d_mode )
507	CASE ( 'xy' )
508	ll = LEN_TRIM( do2d_xy )
509	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
510	CASE ( 'xz' )
511	ll = LEN_TRIM( do2d_xz )
512	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
513	CASE ( 'yz' )
514	ll = LEN_TRIM( do2d_yz )
515	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
516	END SELECT
517
518	i = i + 1
519
520	ENDDO
521
522	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
523	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
524	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
525	( netcdf_output .OR. iso2d_output ) ) THEN
526
527	IF ( av == 0 ) THEN
528	WRITE ( io, 334 ) ''
529	ELSE
530	WRITE ( io, 334 ) '(time-averaged)'
531	ENDIF
532
533	IF ( do2d_at_begin ) THEN
534	begin_chr = 'and at the start'
535	ELSE
536	begin_chr = ''
537	ENDIF
538
539	output_format = ''
540	IF ( netcdf_output ) THEN
541	IF ( netcdf_64bit ) THEN
542	output_format = 'netcdf (64 bit offset)'
543	ELSE
544	output_format = 'netcdf'
545	ENDIF
546	ENDIF
547	IF ( iso2d_output ) THEN
548	IF ( netcdf_output ) THEN
549	output_format = TRIM( output_format ) // ' and iso2d'
550	ELSE
551	output_format = 'iso2d'
552	ENDIF
553	ENDIF
554	WRITE ( io, 345 ) output_format
555
556	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
557	i = 1
558	slices = '/'
559	coordinates = '/'
560	!
561	!-- Building strings with index and coordinate informations of the
562	!-- slices
563	DO WHILE ( section(i,1) /= -9999 )
564
565	WRITE (section_chr,'(I5)') section(i,1)
566	section_chr = ADJUSTL( section_chr )
567	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
568
569	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
570	coor_chr = ADJUSTL( coor_chr )
571	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
572
573	i = i + 1
574	ENDDO
575	IF ( av == 0 ) THEN
576	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
577	TRIM( begin_chr ), 'k', TRIM( slices ), &
578	TRIM( coordinates )
579	IF ( skip_time_do2d_xy /= 0.0 ) THEN
580	WRITE ( io, 339 ) skip_time_do2d_xy
581	ENDIF
582	ELSE
583	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
584	TRIM( begin_chr ), averaging_interval, &
585	dt_averaging_input, 'k', TRIM( slices ), &
586	TRIM( coordinates )
587	IF ( skip_time_data_output_av /= 0.0 ) THEN
588	WRITE ( io, 339 ) skip_time_data_output_av
589	ENDIF
590	ENDIF
591
592	ENDIF
593
594	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
595	i = 1
596	slices = '/'
597	coordinates = '/'
598	!
599	!-- Building strings with index and coordinate informations of the
600	!-- slices
601	DO WHILE ( section(i,2) /= -9999 )
602
603	WRITE (section_chr,'(I5)') section(i,2)
604	section_chr = ADJUSTL( section_chr )
605	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
606
607	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
608	coor_chr = ADJUSTL( coor_chr )
609	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
610
611	i = i + 1
612	ENDDO
613	IF ( av == 0 ) THEN
614	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
615	TRIM( begin_chr ), 'j', TRIM( slices ), &
616	TRIM( coordinates )
617	IF ( skip_time_do2d_xz /= 0.0 ) THEN
618	WRITE ( io, 339 ) skip_time_do2d_xz
619	ENDIF
620	ELSE
621	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
622	TRIM( begin_chr ), averaging_interval, &
623	dt_averaging_input, 'j', TRIM( slices ), &
624	TRIM( coordinates )
625	IF ( skip_time_data_output_av /= 0.0 ) THEN
626	WRITE ( io, 339 ) skip_time_data_output_av
627	ENDIF
628	ENDIF
629	ENDIF
630
631	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
632	i = 1
633	slices = '/'
634	coordinates = '/'
635	!
636	!-- Building strings with index and coordinate informations of the
637	!-- slices
638	DO WHILE ( section(i,3) /= -9999 )
639
640	WRITE (section_chr,'(I5)') section(i,3)
641	section_chr = ADJUSTL( section_chr )
642	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
643
644	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
645	coor_chr = ADJUSTL( coor_chr )
646	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
647
648	i = i + 1
649	ENDDO
650	IF ( av == 0 ) THEN
651	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
652	TRIM( begin_chr ), 'i', TRIM( slices ), &
653	TRIM( coordinates )
654	IF ( skip_time_do2d_yz /= 0.0 ) THEN
655	WRITE ( io, 339 ) skip_time_do2d_yz
656	ENDIF
657	ELSE
658	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
659	TRIM( begin_chr ), averaging_interval, &
660	dt_averaging_input, 'i', TRIM( slices ), &
661	TRIM( coordinates )
662	IF ( skip_time_data_output_av /= 0.0 ) THEN
663	WRITE ( io, 339 ) skip_time_data_output_av
664	ENDIF
665	ENDIF
666	ENDIF
667
668	ENDIF
669
670	ENDDO
671
672	!
673	!-- 3d-arrays
674	DO av = 0, 1
675
676	i = 1
677	do3d_chr = ''
678	DO WHILE ( do3d(av,i) /= ' ' )
679
680	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
681	i = i + 1
682
683	ENDDO
684
685	IF ( do3d_chr /= '' ) THEN
686	IF ( av == 0 ) THEN
687	WRITE ( io, 336 ) ''
688	ELSE
689	WRITE ( io, 336 ) '(time-averaged)'
690	ENDIF
691
692	output_format = ''
693	IF ( netcdf_output ) THEN
694	IF ( netcdf_64bit ) THEN
695	output_format = 'netcdf (64 bit offset)'
696	ELSE
697	output_format = 'netcdf'
698	ENDIF
699	ENDIF
700	IF ( avs_output ) THEN
701	IF ( netcdf_output ) THEN
702	output_format = TRIM( output_format ) // ' and avs'
703	ELSE
704	output_format = 'avs'
705	ENDIF
706	ENDIF
707	WRITE ( io, 345 ) output_format
708
709	IF ( do3d_at_begin ) THEN
710	begin_chr = 'and at the start'
711	ELSE
712	begin_chr = ''
713	ENDIF
714	IF ( av == 0 ) THEN
715	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
716	zu(nz_do3d), nz_do3d
717	ELSE
718	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
719	TRIM( begin_chr ), averaging_interval, &
720	dt_averaging_input, zu(nz_do3d), nz_do3d
721	ENDIF
722
723	IF ( do3d_compress ) THEN
724	do3d_chr = ''
725	i = 1
726	DO WHILE ( do3d(av,i) /= ' ' )
727
728	SELECT CASE ( do3d(av,i) )
729	CASE ( 'u' )
730	j = 1
731	CASE ( 'v' )
732	j = 2
733	CASE ( 'w' )
734	j = 3
735	CASE ( 'p' )
736	j = 4
737	CASE ( 'pt' )
738	j = 5
739	END SELECT
740	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
741	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
742	':' // prec // ','
743	i = i + 1
744
745	ENDDO
746	WRITE ( io, 338 ) do3d_chr
747
748	ENDIF
749
750	IF ( av == 0 ) THEN
751	IF ( skip_time_do3d /= 0.0 ) THEN
752	WRITE ( io, 339 ) skip_time_do3d
753	ENDIF
754	ELSE
755	IF ( skip_time_data_output_av /= 0.0 ) THEN
756	WRITE ( io, 339 ) skip_time_data_output_av
757	ENDIF
758	ENDIF
759
760	ENDIF
761
762	ENDDO
763
764	!
765	!-- Timeseries
766	IF ( dt_dots /= 9999999.9 ) THEN
767	WRITE ( io, 340 )
768
769	output_format = ''
770	IF ( netcdf_output ) THEN
771	IF ( netcdf_64bit ) THEN
772	output_format = 'netcdf (64 bit offset)'
773	ELSE
774	output_format = 'netcdf'
775	ENDIF
776	ENDIF
777	IF ( profil_output ) THEN
778	IF ( netcdf_output ) THEN
779	output_format = TRIM( output_format ) // ' and profil'
780	ELSE
781	output_format = 'profil'
782	ENDIF
783	ENDIF
784	WRITE ( io, 345 ) output_format
785	WRITE ( io, 341 ) dt_dots
786	ENDIF
787
788	#if defined( __dvrp_graphics )
789	!
790	!-- Dvrp-output
791	IF ( dt_dvrp /= 9999999.9 ) THEN
792	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
793	TRIM( dvrp_username ), TRIM( dvrp_directory )
794	i = 1
795	l = 0
796	DO WHILE ( mode_dvrp(i) /= ' ' )
797	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
798	READ ( mode_dvrp(i), '(10X,I1)' ) j
799	l = l + 1
800	IF ( do3d(0,j) /= ' ' ) THEN
801	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
802	ENDIF
803	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
804	READ ( mode_dvrp(i), '(6X,I1)' ) j
805	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
806	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
807	WRITE ( io, 363 )
808	ENDIF
809	i = i + 1
810	ENDDO
811	ENDIF
812	#endif
813
814	#if defined( __spectra )
815	!
816	!-- Spectra output
817	IF ( dt_dosp /= 9999999.9 ) THEN
818	WRITE ( io, 370 )
819
820	output_format = ''
821	IF ( netcdf_output ) THEN
822	IF ( netcdf_64bit ) THEN
823	output_format = 'netcdf (64 bit offset)'
824	ELSE
825	output_format = 'netcdf'
826	ENDIF
827	ENDIF
828	IF ( profil_output ) THEN
829	IF ( netcdf_output ) THEN
830	output_format = TRIM( output_format ) // ' and profil'
831	ELSE
832	output_format = 'profil'
833	ENDIF
834	ENDIF
835	WRITE ( io, 345 ) output_format
836	WRITE ( io, 371 ) dt_dosp
837	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
838	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
839	( spectra_direction(i), i = 1,10 ), &
840	( comp_spectra_level(i), i = 1,10 ), &
841	( plot_spectra_level(i), i = 1,10 ), &
842	averaging_interval_sp, dt_averaging_input_pr
843	ENDIF
844	#endif
845
846	WRITE ( io, 99 )
847
848	!
849	!-- Physical quantities
850	WRITE ( io, 400 )
851
852	!
853	!-- Geostrophic parameters
854	WRITE ( io, 410 ) omega, phi, f, fs
855
856	!
857	!-- Other quantities
858	WRITE ( io, 411 ) g
859
860	!
861	!-- Cloud physics parameters
862	IF ( cloud_physics ) THEN
863	WRITE ( io, 412 )
864	WRITE ( io, 413 ) surface_pressure, r_d, rho_surface, cp, l_v
865	ENDIF
866
867	!-- Profile of the geostrophic wind (component ug)
868	!-- Building output strings
869	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
870	gradients = '------'
871	slices = ' 0'
872	coordinates = ' 0.0'
873	i = 1
874	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
875
876	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
877	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
878
879	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
880	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
881
882	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
883	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
884
885	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
886	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
887
888	i = i + 1
889	ENDDO
890
891	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
892	TRIM( gradients ), TRIM( slices )
893
894	!-- Profile of the geostrophic wind (component vg)
895	!-- Building output strings
896	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
897	gradients = '------'
898	slices = ' 0'
899	coordinates = ' 0.0'
900	i = 1
901	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
902
903	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
904	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
905
906	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
907	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
908
909	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
910	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
911
912	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
913	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
914
915	i = i + 1
916	ENDDO
917
918	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
919	TRIM( gradients ), TRIM( slices )
920
921	!
922	!-- Initial temperature profile
923	!-- Building output strings, starting with surface temperature
924	WRITE ( temperatures, '(F6.2)' ) pt_surface
925	gradients = '------'
926	slices = ' 0'
927	coordinates = ' 0.0'
928	i = 1
929	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
930
931	WRITE (coor_chr,'(F6.2,4X)') pt_init(pt_vertical_gradient_level_ind(i))
932	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
933
934	WRITE (coor_chr,'(F6.2,4X)') pt_vertical_gradient(i)
935	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
936
937	WRITE (coor_chr,'(I6,4X)') pt_vertical_gradient_level_ind(i)
938	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
939
940	WRITE (coor_chr,'(F6.1,4X)') pt_vertical_gradient_level(i)
941	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
942
943	i = i + 1
944	ENDDO
945
946	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
947	TRIM( gradients ), TRIM( slices )
948
949	!
950	!-- Initial humidity profile
951	!-- Building output strings, starting with surface humidity
952	IF ( moisture .OR. passive_scalar ) THEN
953	WRITE ( temperatures, '(E8.1)' ) q_surface
954	gradients = '--------'
955	slices = ' 0'
956	coordinates = ' 0.0'
957	i = 1
958	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
959
960	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
961	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
962
963	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
964	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
965
966	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
967	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
968
969	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
970	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
971
972	i = i + 1
973	ENDDO
974
975	IF ( moisture ) THEN
976	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
977	TRIM( gradients ), TRIM( slices )
978	ELSE
979	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
980	TRIM( gradients ), TRIM( slices )
981	ENDIF
982	ENDIF
983
984	!
985	!-- LES / turbulence parameters
986	WRITE ( io, 450 )
987
988	!--
989	! ... LES-constants used must still be added here
990	!--
991	IF ( constant_diffusion ) THEN
992	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
993	prandtl_number
994	ENDIF
995	IF ( .NOT. constant_diffusion) THEN
996	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
997	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
998	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
999	ENDIF
1000
1001	!
1002	!-- Special actions during the run
1003	WRITE ( io, 470 )
1004	IF ( create_disturbances ) THEN
1005	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1006	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1007	zu(disturbance_level_ind_t), disturbance_level_ind_t
1008	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1009	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1010	ELSE
1011	WRITE ( io, 473 ) disturbance_energy_limit
1012	ENDIF
1013	WRITE ( io, 474 ) TRIM( random_generator )
1014	ENDIF
1015	IF ( pt_surface_initial_change /= 0.0 ) THEN
1016	WRITE ( io, 475 ) pt_surface_initial_change
1017	ENDIF
1018	IF ( moisture .AND. q_surface_initial_change /= 0.0 ) THEN
1019	WRITE ( io, 476 ) q_surface_initial_change
1020	ENDIF
1021	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1022	WRITE ( io, 477 ) q_surface_initial_change
1023	ENDIF
1024
1025	#if defined( __particles )
1026	!
1027	!-- Particle attributes
1028	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1029	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1030	end_time_prel
1031	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1032	IF ( random_start_position ) WRITE ( io, 481 )
1033	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1034	WRITE ( io, 495 ) total_number_of_particles
1035	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1036	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1037	WRITE ( io, 483 ) maximum_number_of_tailpoints
1038	IF ( minimum_tailpoint_distance /= 0 ) THEN
1039	WRITE ( io, 484 ) total_number_of_tails, minimum_tailpoint_distance,&
1040	maximum_tailpoint_age
1041	ENDIF
1042	ENDIF
1043	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1044	WRITE ( io, 485 ) dt_write_particle_data
1045	output_format = ''
1046	IF ( netcdf_output ) THEN
1047	IF ( netcdf_64bit ) THEN
1048	output_format = 'netcdf (64 bit offset) and binary'
1049	ELSE
1050	output_format = 'netcdf and binary'
1051	ENDIF
1052	ELSE
1053	output_format = 'binary'
1054	ENDIF
1055	WRITE ( io, 345 ) output_format
1056	ENDIF
1057	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1058	IF ( write_particle_statistics ) WRITE ( io, 486 )
1059
1060	WRITE ( io, 487 ) number_of_particle_groups
1061
1062	DO i = 1, number_of_particle_groups
1063	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1064	WRITE ( io, 490 ) i, 0.0
1065	WRITE ( io, 492 )
1066	ELSE
1067	WRITE ( io, 490 ) i, radius(i)
1068	IF ( density_ratio(i) /= 0.0 ) THEN
1069	WRITE ( io, 491 ) density_ratio(i)
1070	ELSE
1071	WRITE ( io, 492 )
1072	ENDIF
1073	ENDIF
1074	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1075	pdx(i), pdy(i), pdz(i)
1076	ENDDO
1077
1078	#endif
1079
1080	!
1081	!-- Parameters of 1D-model
1082	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1083	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1084	mixing_length_1d, dissipation_1d
1085	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1086	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1087	ENDIF
1088	ENDIF
1089
1090	!
1091	!-- User-defined informations
1092	CALL user_header( io )
1093
1094	WRITE ( io, 99 )
1095
1096	#if defined( __ibm )
1097	!
1098	!-- Write buffer contents to disc immediately
1099	CALL FLUSH_( io )
1100	#elif defined( __lcmuk ) \|\| defined( __nec )
1101	CALL FLUSH( io )
1102	#endif
1103
1104	!
1105	!-- Here the FORMATs start
1106
1107	99 FORMAT (1X,78('-'))
1108	100 FORMAT (/10X,'****************',11X,28('-')/ &
1109	10X,'* ',A12,'*',11X,A/ &
1110	10X,'****************',11X,28('-')// &
1111	' Date: ',A8,11X,'Run: ',A20/ &
1112	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1113	' Run on host: ',A10)
1114	#if defined( __parallel )
1115	101 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1116	')',1X,A)
1117	102 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1118	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1119	103 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1120	104 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1121	37X,'because the job is running on an SMP-cluster')
1122	105 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1123	#endif
1124	110 FORMAT (/' Numerical Schemes:'/ &
1125	' -----------------'/)
1126	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1127	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1128	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1129	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1130	' or Upstream')
1131	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1132	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1133	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1134	' or Upstream')
1135	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1136	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1137	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1138	' Translation velocity = ',A/ &
1139	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1140	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1141	' of timestep changes)')
1142	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1143	' timestep changes')
1144	122 FORMAT (' --> Time differencing scheme: ',A)
1145	123 FORMAT (' --> Rayleigh-Damping active, starts above z = ',F8.2,' m'/ &
1146	' maximum damping coefficient: ',F5.3, ' 1/s')
1147	124 FORMAT (' Spline-overshoots are being suppressed')
1148	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1149	' of'/ &
1150	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1151	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1152	' of'/ &
1153	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1154	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1155	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1156	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1157	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1158	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1159	130 FORMAT (' --> Additional prognostic equation for the total water content')
1160	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1161	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1162	' effective emissivity scheme')
1163	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1164	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1165	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1166	A,'-cycle)'/ &
1167	' number of grid levels: ',I2/ &
1168	' Gauss-Seidel red/black iterations: ',I2)
1169	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1170	I3,')')
1171	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1172	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1173	I3,')'/ &
1174	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1175	I3,')')
1176	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1177	139 FORMAT (' --> Prognostic equations are solved in one single loop (fast', &
1178	' method)')
1179	140 FORMAT (' maximum residual allowed: ',E10.3)
1180	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1181	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1182	'step')
1183	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1184	'conserved')
1185	200 FORMAT (//' Run time and time step information:'/ &
1186	' ----------------------------------'/)
1187	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1188	' CFL-factor: ',F4.2)
1189	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1190	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1191	' End time: ',F9.3,' s')
1192	204 FORMAT ( A,F9.3,' s')
1193	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1194	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1195	' CPU-time used: ',F9.3,' s per timestep: ', &
1196	' ',F9.3,' s'/ &
1197	' per second of simulated tim', &
1198	'e: ',F9.3,' s')
1199	250 FORMAT (//' Computational grid and domain size:'/ &
1200	' ----------------------------------'// &
1201	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1202	' m dz = ',F7.3,' m'/ &
1203	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1204	' m z(u) = ',F10.3,' m'/)
1205	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1206	' factor: ',F5.3/ &
1207	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1208	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1209	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1210	255 FORMAT (' Subdomains have equal size')
1211	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1212	'have smaller sizes'/ &
1213	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1214	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1215	' degrees')
1216	270 FORMAT (//' Topography informations:'/ &
1217	' -----------------------'// &
1218	1X,'Topography: ',A)
1219	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1220	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1221	' / ',I4)
1222	300 FORMAT (//' Boundary conditions:'/ &
1223	' -------------------'// &
1224	' p uv ', &
1225	' pt'// &
1226	' B. bound.: ',A/ &
1227	' T. bound.: ',A)
1228	301 FORMAT (/' e'// &
1229	' B. bound.: ',A/ &
1230	' T. bound.: ',A)
1231	302 FORMAT (/' q'// &
1232	' B. bound.: ',A/ &
1233	' T. bound.: ',A)
1234	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1235	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1236	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1237	'computational u,v-level:'// &
1238	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1239	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1240	306 FORMAT (' Predefined constant heatflux: ',F6.3,' K m/s')
1241	307 FORMAT (' Heatflux has a random normal distribution')
1242	308 FORMAT (' Predefined surface temperature')
1243	310 FORMAT (//' 1D-Model:'// &
1244	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1245	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1246	312 FORMAT (' Predefined surface humidity')
1247	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1248	314 FORMAT (' Predefined scalar value at the surface')
1249	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1250	317 FORMAT (//' Lateral boundaries:'/ &
1251	' left/right: ',A/ &
1252	' north/south: ',A)
1253	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1254	'max =',F5.1,' m**2/s')
1255	320 FORMAT (//' List output:'/ &
1256	' -----------'// &
1257	' 1D-Profiles:'/ &
1258	' Output every ',F8.2,' s')
1259	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
1260	' Averaging input every ',F8.2,' s')
1261	330 FORMAT (//' Data output:'/ &
1262	' -----------'/)
1263	331 FORMAT (/' 1D-Profiles:')
1264	332 FORMAT (/' ',A)
1265	333 FORMAT (' Output every ',F8.2,' s',/ &
1266	' Time averaged over ',F8.2,' s'/ &
1267	' Averaging input every ',F8.2,' s')
1268	334 FORMAT (/' 2D-Arrays',A,':')
1269	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1270	' Output every ',F8.2,' s ',A/ &
1271	' Cross sections at ',A1,' = ',A/ &
1272	' scalar-coordinates: ',A,' m'/)
1273	336 FORMAT (/' 3D-Arrays',A,':')
1274	337 FORMAT (/' Arrays: ',A/ &
1275	' Output every ',F8.2,' s ',A/ &
1276	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1277	338 FORMAT (' Compressed data output'/ &
1278	' Decimal precision: ',A/)
1279	339 FORMAT (' No output during initial ',F8.2,' s')
1280	340 FORMAT (/' Time series:')
1281	341 FORMAT (' Output every ',F8.2,' s'/)
1282	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1283	' Output every ',F8.2,' s ',A/ &
1284	' Time averaged over ',F8.2,' s'/ &
1285	' Averaging input every ',F8.2,' s'/ &
1286	' Cross sections at ',A1,' = ',A/ &
1287	' scalar-coordinates: ',A,' m'/)
1288	343 FORMAT (/' Arrays: ',A/ &
1289	' Output every ',F8.2,' s ',A/ &
1290	' Time averaged over ',F8.2,' s'/ &
1291	' Averaging input every ',F8.2,' s'/ &
1292	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1293	345 FORMAT (' Output format: ',A/)
1294	#if defined( __dvrp_graphics )
1295	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1296	' Output every ',F7.1,' s'/ &
1297	' Output mode: ',A/ &
1298	' Host / User: ',A,' / ',A/ &
1299	' Directory: ',A// &
1300	' The sequence contains:')
1301	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1302	362 FORMAT (' Sectional plane ',A)
1303	363 FORMAT (' Particles')
1304	#endif
1305	#if defined( __spectra )
1306	370 FORMAT (' Spectra:')
1307	371 FORMAT (' Output every ',F7.1,' s'/)
1308	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1309	' Directions: ', 10(A5,',')/ &
1310	' height levels k = ', 9(I3,','),I3,'.'/ &
1311	' height levels selected for standard plot:'/ &
1312	' k = ', 9(I3,','),I3,'.'/ &
1313	' Time averaged over ', F7.1, ' s,' / &
1314	' Profiles for the time averaging are taken every ', &
1315	F6.1,' s')
1316	#endif
1317	400 FORMAT (//' Physical quantities:'/ &
1318	' -------------------'/)
1319	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1320	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1321	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1322	' f* = ',F9.6,' 1/s')
1323	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1324	412 FORMAT (/' Cloud physics parameters:'/ &
1325	' ------------------------'/)
1326	413 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1327	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1328	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1329	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1330	' Vapourization heat : L_v = ',E8.2,' J/kg')
1331	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1332	' Height: ',A,' m'/ &
1333	' Temperature: ',A,' K'/ &
1334	' Gradient: ',A,' K/100m'/ &
1335	' Gridpoint: ',A)
1336	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1337	' Height: ',A,' m'/ &
1338	' Humidity: ',A,' kg/kg'/ &
1339	' Gradient: ',A,' (kg/kg)/100m'/ &
1340	' Gridpoint: ',A)
1341	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1342	' Height: ',A,' m'/ &
1343	' Scalar concentration: ',A,' kg/m**3'/ &
1344	' Gradient: ',A,' (kg/m**3)/100m'/ &
1345	' Gridpoint: ',A)
1346	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1347	' Height: ',A,' m'/ &
1348	' ug: ',A,' m/s'/ &
1349	' Gradient: ',A,' 1/100s'/ &
1350	' Gridpoint: ',A)
1351	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1352	' Height: ',A,' m'/ &
1353	' vg: ',A,' m/S'/ &
1354	' Gradient: ',A,' 1/100s'/ &
1355	' Gridpoint: ',A)
1356	450 FORMAT (//' LES / Turbulence quantities:'/ &
1357	' ---------------------------'/)
1358	451 FORMAT (' Diffusion coefficients are constant:'/ &
1359	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1360	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1361	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1362	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1363	470 FORMAT (//' Actions during the simulation:'/ &
1364	' -----------------------------'/)
1365	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1366	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1367	' Lower disturbance level : ',F7.2,' m (GP ',I4,')'/ &
1368	' Upper disturbance level : ',F7.2,' m (GP ',I4,')')
1369	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1370	' to i/j =',I4)
1371	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1372	1X,F5.3, ' m2/s2')
1373	474 FORMAT (' Random number generator used : ',A/)
1374	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1375	'respectively, if'/ &
1376	' the value is negative) by ',F5.2,' K at the beginning of the',&
1377	' 3D-simulation'/)
1378	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1379	'respectively, if the'/ &
1380	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1381	' the 3D-simulation'/)
1382	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1383	'respectively, if the'/ &
1384	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1385	' the 3D-simulation'/)
1386	#if defined( __particles )
1387	480 FORMAT (' Particles:'/ &
1388	' ---------'// &
1389	' Particle advection is active (switched on at t = ', F7.1, &
1390	' s)'/ &
1391	' Start of new particle generations every ',F6.1,' s'/ &
1392	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1393	' bottom: ', A, ' top: ', A/&
1394	' Maximum particle age: ',F9.1,' s'/ &
1395	' Advection stopped at t = ',F9.1,' s'/)
1396	481 FORMAT (' Particles have random start positions'/)
1397	482 FORMAT (' Particles are advected only horizontally'/)
1398	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1399	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1400	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1401	' Maximum age of the end of the tail: ',F8.2,' s')
1402	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1403	486 FORMAT (' Particle statistics are written on file'/)
1404	487 FORMAT (' Number of particle groups: ',I2/)
1405	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1406	' minimum timestep for advection: ', F7.5/)
1407	489 FORMAT (' Number of particles simultaneously released at each ', &
1408	'point: ', I5/)
1409	490 FORMAT (' Particle group ',I2,':'/ &
1410	' Particle radius: ',E10.3, 'm')
1411	491 FORMAT (' Particle inertia is activated'/ &
1412	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1413	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1414	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1415	' y:',F8.1,' - ',F8.1,' m'/&
1416	' z:',F8.1,' - ',F8.1,' m'/&
1417	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1418	' m dz = ',F8.1,' m'/)
1419	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1420	F8.2,' s'/)
1421	495 FORMAT (' Number of particles in total domain: ',I10/)
1422	#endif
1423	500 FORMAT (//' 1D-Model parameters:'/ &
1424	' -------------------'// &
1425	' Simulation time: ',F8.1,' s'/ &
1426	' Run-controll output every: ',F8.1,' s'/ &
1427	' Vertical profile output every: ',F8.1,' s'/ &
1428	' Mixing length calculation: ',A/ &
1429	' Dissipation calculation: ',A/)
1430	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1431
1432
1433	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |