Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 226

Last change on this file since 226 was 226, checked in by raasch, 16 years ago
preparations for the next release
Property svn:keywords set to `Id`
File size: 63.2 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 226 2009-02-02 07:39:34Z raasch $
11	!
12	! 206 2008-10-13 14:59:11Z raasch
13	! Bugfix: error in zu index in case of section_xy = -1
14	!
15	! 198 2008-09-17 08:55:28Z raasch
16	! Format adjustments allowing output of larger revision numbers
17	!
18	! 197 2008-09-16 15:29:03Z raasch
19	! allow 100 spectra levels instead of 10 for consistency with
20	! define_netcdf_header,
21	! bugfix in the output of the characteristic levels of potential temperature,
22	! geostrophic wind, scalar concentration, humidity and leaf area density,
23	! output of turbulence recycling informations
24	!
25	! 138 2007-11-28 10:03:58Z letzel
26	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
27	! Allow two instead of one digit to specify isosurface and slicer variables.
28	! Output of sorting frequency of particles
29	!
30	! 108 2007-08-24 15:10:38Z letzel
31	! Output of informations for coupled model runs (boundary conditions etc.)
32	! + output of momentumfluxes at the top boundary
33	! Rayleigh damping for ocean, e_init
34	!
35	! 97 2007-06-21 08:23:15Z raasch
36	! Adjustments for the ocean version.
37	! use_pt_reference renamed use_reference
38	!
39	! 87 2007-05-22 15:46:47Z raasch
40	! Bugfix: output of use_upstream_for_tke
41	!
42	! 82 2007-04-16 15:40:52Z raasch
43	! Preprocessor strings for different linux clusters changed to "lc",
44	! routine local_flush is used for buffer flushing
45	!
46	! 76 2007-03-29 00:58:32Z raasch
47	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
48	! output of the loop optimization method, moisture renamed humidity,
49	! output of subversion revision number
50	!
51	! 19 2007-02-23 04:53:48Z raasch
52	! Output of scalar flux applied at top boundary
53	!
54	! RCS Log replace by Id keyword, revision history cleaned up
55	!
56	! Revision 1.63 2006/08/22 13:53:13 raasch
57	! Output of dz_max
58	!
59	! Revision 1.1 1997/08/11 06:17:20 raasch
60	! Initial revision
61	!
62	!
63	! Description:
64	! ------------
65	! Writing a header with all important informations about the actual run.
66	! This subroutine is called three times, two times at the beginning
67	! (writing information on files RUN_CONTROL and HEADER) and one time at the
68	! end of the run, then writing additional information about CPU-usage on file
69	! header.
70	!------------------------------------------------------------------------------!
71
72	USE arrays_3d
73	USE control_parameters
74	USE cloud_parameters
75	USE cpulog
76	USE dvrp_variables
77	USE grid_variables
78	USE indices
79	USE model_1d
80	USE particle_attributes
81	USE pegrid
82	USE spectrum
83
84	IMPLICIT NONE
85
86	CHARACTER (LEN=1) :: prec
87	CHARACTER (LEN=2) :: do2d_mode
88	CHARACTER (LEN=5) :: section_chr
89	CHARACTER (LEN=9) :: time_to_string
90	CHARACTER (LEN=10) :: coor_chr, host_chr
91	CHARACTER (LEN=16) :: begin_chr
92	CHARACTER (LEN=23) :: ver_rev
93	CHARACTER (LEN=40) :: output_format
94	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
95	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
96	run_classification
97	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
98	temperatures, ugcomponent, vgcomponent
99	CHARACTER (LEN=85) :: roben, runten
100
101	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
102	REAL :: cpuseconds_per_simulated_second
103
104	!
105	!-- Open the output file. At the end of the simulation, output is directed
106	!-- to unit 19.
107	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
108	.NOT. simulated_time_at_begin /= simulated_time ) THEN
109	io = 15 ! header output on file RUN_CONTROL
110	ELSE
111	io = 19 ! header output on file HEADER
112	ENDIF
113	CALL check_open( io )
114
115	!
116	!-- At the end of the run, output file (HEADER) will be rewritten with
117	!-- new informations
118	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
119
120	!
121	!-- Determine kind of model run
122	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
123	run_classification = '3D - restart run'
124	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
125	run_classification = '3D - run using 3D - prerun data'
126	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
127	run_classification = '3D - run without 1D - prerun'
128	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
129	run_classification = '3D - run with 1D - prerun'
130	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
131	run_classification = '3D - run initialized by user'
132	ELSE
133	PRINT*,'+++ header: unknown action(s): ',initializing_actions
134	ENDIF
135	IF ( ocean ) THEN
136	run_classification = 'ocean - ' // run_classification
137	ELSE
138	run_classification = 'atmosphere - ' // run_classification
139	ENDIF
140
141	!
142	!-- Run-identification, date, time, host
143	host_chr = host(1:10)
144	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
145	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
146	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
147	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
148	ADJUSTR( host_chr )
149	#if defined( __parallel )
150	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
151	char1 = 'calculated'
152	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
153	host(1:2) == 'lc' ) .AND. &
154	npex == -1 .AND. pdims(2) == 1 ) THEN
155	char1 = 'forced'
156	ELSE
157	char1 = 'predefined'
158	ENDIF
159	IF ( threads_per_task == 1 ) THEN
160	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
161	ELSE
162	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
163	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
164	ENDIF
165	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
166	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
167	npex == -1 .AND. pdims(2) == 1 ) &
168	THEN
169	WRITE ( io, 106 )
170	ELSEIF ( pdims(2) == 1 ) THEN
171	WRITE ( io, 107 ) 'x'
172	ELSEIF ( pdims(1) == 1 ) THEN
173	WRITE ( io, 107 ) 'y'
174	ENDIF
175	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
176	#endif
177	WRITE ( io, 99 )
178
179	!
180	!-- Numerical schemes
181	WRITE ( io, 110 )
182	IF ( psolver(1:7) == 'poisfft' ) THEN
183	WRITE ( io, 111 ) TRIM( fft_method )
184	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
185	ELSEIF ( psolver == 'sor' ) THEN
186	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
187	ELSEIF ( psolver == 'multigrid' ) THEN
188	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
189	IF ( mg_cycles == -1 ) THEN
190	WRITE ( io, 140 ) residual_limit
191	ELSE
192	WRITE ( io, 141 ) mg_cycles
193	ENDIF
194	IF ( mg_switch_to_pe0_level == 0 ) THEN
195	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
196	nzt_mg(1)
197	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
198	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
199	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
200	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
201	nzt_mg(mg_switch_to_pe0_level), &
202	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
203	nzt_mg(1)
204	ENDIF
205	ENDIF
206	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
207	THEN
208	WRITE ( io, 142 )
209	ENDIF
210
211	IF ( momentum_advec == 'pw-scheme' ) THEN
212	WRITE ( io, 113 )
213	ELSE
214	WRITE ( io, 114 )
215	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
216	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
217	overshoot_limit_w /= 0.0 ) THEN
218	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
219	overshoot_limit_w
220	ENDIF
221	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
222	ups_limit_w /= 0.0 ) &
223	THEN
224	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
225	ENDIF
226	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
227	ENDIF
228	IF ( scalar_advec == 'pw-scheme' ) THEN
229	WRITE ( io, 116 )
230	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
231	WRITE ( io, 117 )
232	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
233	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
234	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
235	ENDIF
236	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
237	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
238	ENDIF
239	ELSE
240	WRITE ( io, 118 )
241	ENDIF
242
243	WRITE ( io, 139 ) TRIM( loop_optimization )
244
245	IF ( galilei_transformation ) THEN
246	IF ( use_ug_for_galilei_tr ) THEN
247	char1 = 'geostrophic wind'
248	ELSE
249	char1 = 'mean wind in model domain'
250	ENDIF
251	IF ( simulated_time_at_begin == simulated_time ) THEN
252	char2 = 'at the start of the run'
253	ELSE
254	char2 = 'at the end of the run'
255	ENDIF
256	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
257	advected_distance_x/1000.0, advected_distance_y/1000.0
258	ENDIF
259	IF ( timestep_scheme == 'leapfrog' ) THEN
260	WRITE ( io, 120 )
261	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
262	WRITE ( io, 121 )
263	ELSE
264	WRITE ( io, 122 ) timestep_scheme
265	ENDIF
266	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
267	IF ( rayleigh_damping_factor /= 0.0 ) THEN
268	IF ( .NOT. ocean ) THEN
269	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
270	rayleigh_damping_factor
271	ELSE
272	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
273	rayleigh_damping_factor
274	ENDIF
275	ENDIF
276	IF ( humidity ) THEN
277	IF ( .NOT. cloud_physics ) THEN
278	WRITE ( io, 129 )
279	ELSE
280	WRITE ( io, 130 )
281	WRITE ( io, 131 )
282	IF ( radiation ) WRITE ( io, 132 )
283	IF ( precipitation ) WRITE ( io, 133 )
284	ENDIF
285	ENDIF
286	IF ( passive_scalar ) WRITE ( io, 134 )
287	IF ( conserve_volume_flow ) WRITE ( io, 150 )
288	WRITE ( io, 99 )
289
290	!
291	!-- Runtime and timestep informations
292	WRITE ( io, 200 )
293	IF ( .NOT. dt_fixed ) THEN
294	WRITE ( io, 201 ) dt_max, cfl_factor
295	ELSE
296	WRITE ( io, 202 ) dt
297	ENDIF
298	WRITE ( io, 203 ) simulated_time_at_begin, end_time
299
300	IF ( time_restart /= 9999999.9 .AND. &
301	simulated_time_at_begin == simulated_time ) THEN
302	IF ( dt_restart == 9999999.9 ) THEN
303	WRITE ( io, 204 ) ' Restart at: ',time_restart
304	ELSE
305	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
306	ENDIF
307	ENDIF
308
309	IF ( simulated_time_at_begin /= simulated_time ) THEN
310	i = MAX ( log_point_s(10)%counts, 1 )
311	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
312	cpuseconds_per_simulated_second = 0.0
313	ELSE
314	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
315	( simulated_time - &
316	simulated_time_at_begin )
317	ENDIF
318	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
319	log_point_s(10)%sum / REAL( i ), &
320	cpuseconds_per_simulated_second
321	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
322	IF ( dt_restart == 9999999.9 ) THEN
323	WRITE ( io, 204 ) ' Next restart at: ',time_restart
324	ELSE
325	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
326	ENDIF
327	ENDIF
328	ENDIF
329
330	!
331	!-- Computational grid
332	IF ( .NOT. ocean ) THEN
333	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
334	IF ( dz_stretch_level_index < nzt+1 ) THEN
335	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
336	dz_stretch_factor, dz_max
337	ENDIF
338	ELSE
339	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
340	IF ( dz_stretch_level_index > 0 ) THEN
341	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
342	dz_stretch_factor, dz_max
343	ENDIF
344	ENDIF
345	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
346	MIN( nnz+2, nzt+2 )
347	IF ( numprocs > 1 ) THEN
348	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
349	WRITE ( io, 255 )
350	ELSE
351	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
352	ENDIF
353	ENDIF
354	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
355
356	!
357	!-- Topography
358	WRITE ( io, 270 ) topography
359	SELECT CASE ( TRIM( topography ) )
360
361	CASE ( 'flat' )
362	! no actions necessary
363
364	CASE ( 'single_building' )
365	blx = INT( building_length_x / dx )
366	bly = INT( building_length_y / dy )
367	bh = INT( building_height / dz )
368
369	IF ( building_wall_left == 9999999.9 ) THEN
370	building_wall_left = ( nx + 1 - blx ) / 2 * dx
371	ENDIF
372	bxl = INT ( building_wall_left / dx + 0.5 )
373	bxr = bxl + blx
374
375	IF ( building_wall_south == 9999999.9 ) THEN
376	building_wall_south = ( ny + 1 - bly ) / 2 * dy
377	ENDIF
378	bys = INT ( building_wall_south / dy + 0.5 )
379	byn = bys + bly
380
381	WRITE ( io, 271 ) building_length_x, building_length_y, &
382	building_height, bxl, bxr, bys, byn
383
384	END SELECT
385
386	IF ( plant_canopy ) THEN
387
388	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
389	IF ( passive_scalar ) THEN
390	WRITE ( io, 281 ) scalar_exchange_coefficient, &
391	leaf_surface_concentration
392	ENDIF
393
394	!
395	!-- Heat flux at the top of vegetation
396	WRITE ( io, 282 ) cthf
397
398	!
399	!-- Leaf area density profile
400	!-- Building output strings, starting with surface value
401	WRITE ( learde, '(F6.2)' ) lad_surface
402	gradients = '------'
403	slices = ' 0'
404	coordinates = ' 0.0'
405	i = 1
406	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
407
408	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
409	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
410
411	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
412	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
413
414	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
415	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
416
417	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
418	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
419
420	i = i + 1
421	ENDDO
422
423	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
424	TRIM( gradients ), TRIM( slices )
425
426	ENDIF
427
428	!
429	!-- Boundary conditions
430	IF ( ibc_p_b == 0 ) THEN
431	runten = 'p(0) = 0 \|'
432	ELSEIF ( ibc_p_b == 1 ) THEN
433	runten = 'p(0) = p(1) \|'
434	ELSE
435	runten = 'p(0) = p(1) +R\|'
436	ENDIF
437	IF ( ibc_p_t == 0 ) THEN
438	roben = 'p(nzt+1) = 0 \|'
439	ELSE
440	roben = 'p(nzt+1) = p(nzt) \|'
441	ENDIF
442
443	IF ( ibc_uv_b == 0 ) THEN
444	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
445	ELSE
446	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
447	ENDIF
448	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
449	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
450	ELSEIF ( ibc_uv_t == 0 ) THEN
451	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
452	ELSE
453	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
454	ENDIF
455
456	IF ( ibc_pt_b == 0 ) THEN
457	runten = TRIM( runten ) // ' pt(0) = pt_surface'
458	ELSEIF ( ibc_pt_b == 1 ) THEN
459	runten = TRIM( runten ) // ' pt(0) = pt(1)'
460	ELSEIF ( ibc_pt_b == 2 ) THEN
461	runten = TRIM( runten ) // ' pt(0) = from coupled model'
462	ENDIF
463	IF ( ibc_pt_t == 0 ) THEN
464	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
465	ELSEIF( ibc_pt_t == 1 ) THEN
466	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
467	ELSEIF( ibc_pt_t == 2 ) THEN
468	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
469	ENDIF
470
471	WRITE ( io, 300 ) runten, roben
472
473	IF ( .NOT. constant_diffusion ) THEN
474	IF ( ibc_e_b == 1 ) THEN
475	runten = 'e(0) = e(1)'
476	ELSE
477	runten = 'e(0) = e(1) = (u/0.1)*2'
478	ENDIF
479	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
480
481	WRITE ( io, 301 ) 'e', runten, roben
482
483	ENDIF
484
485	IF ( ocean ) THEN
486	runten = 'sa(0) = sa(1)'
487	IF ( ibc_sa_t == 0 ) THEN
488	roben = 'sa(nzt+1) = sa_surface'
489	ELSE
490	roben = 'sa(nzt+1) = sa(nzt)'
491	ENDIF
492	WRITE ( io, 301 ) 'sa', runten, roben
493	ENDIF
494
495	IF ( humidity ) THEN
496	IF ( ibc_q_b == 0 ) THEN
497	runten = 'q(0) = q_surface'
498	ELSE
499	runten = 'q(0) = q(1)'
500	ENDIF
501	IF ( ibc_q_t == 0 ) THEN
502	roben = 'q(nzt) = q_top'
503	ELSE
504	roben = 'q(nzt) = q(nzt-1) + dq/dz'
505	ENDIF
506	WRITE ( io, 301 ) 'q', runten, roben
507	ENDIF
508
509	IF ( passive_scalar ) THEN
510	IF ( ibc_q_b == 0 ) THEN
511	runten = 's(0) = s_surface'
512	ELSE
513	runten = 's(0) = s(1)'
514	ENDIF
515	IF ( ibc_q_t == 0 ) THEN
516	roben = 's(nzt) = s_top'
517	ELSE
518	roben = 's(nzt) = s(nzt-1) + ds/dz'
519	ENDIF
520	WRITE ( io, 301 ) 's', runten, roben
521	ENDIF
522
523	IF ( use_surface_fluxes ) THEN
524	WRITE ( io, 303 )
525	IF ( constant_heatflux ) THEN
526	WRITE ( io, 306 ) surface_heatflux
527	IF ( random_heatflux ) WRITE ( io, 307 )
528	ENDIF
529	IF ( humidity .AND. constant_waterflux ) THEN
530	WRITE ( io, 311 ) surface_waterflux
531	ENDIF
532	IF ( passive_scalar .AND. constant_waterflux ) THEN
533	WRITE ( io, 313 ) surface_waterflux
534	ENDIF
535	ENDIF
536
537	IF ( use_top_fluxes ) THEN
538	WRITE ( io, 304 )
539	IF ( coupling_mode == 'uncoupled' ) THEN
540	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
541	IF ( constant_top_heatflux ) THEN
542	WRITE ( io, 306 ) top_heatflux
543	ENDIF
544	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
545	WRITE ( io, 316 )
546	ENDIF
547	IF ( ocean .AND. constant_top_salinityflux ) THEN
548	WRITE ( io, 309 ) top_salinityflux
549	ENDIF
550	IF ( humidity .OR. passive_scalar ) THEN
551	WRITE ( io, 315 )
552	ENDIF
553	ENDIF
554
555	IF ( prandtl_layer ) THEN
556	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
557	rif_min, rif_max
558	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
559	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
560	WRITE ( io, 312 )
561	ENDIF
562	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
563	WRITE ( io, 314 )
564	ENDIF
565	ELSE
566	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
567	WRITE ( io, 310 ) rif_min, rif_max
568	ENDIF
569	ENDIF
570
571	WRITE ( io, 317 ) bc_lr, bc_ns
572	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
573	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
574	IF ( turbulent_inflow ) THEN
575	WRITE ( io, 319 ) recycling_width, recycling_plane, &
576	inflow_damping_height, inflow_damping_width
577	ENDIF
578	ENDIF
579
580	!
581	!-- Listing of 1D-profiles
582	WRITE ( io, 325 ) dt_dopr_listing
583	IF ( averaging_interval_pr /= 0.0 ) THEN
584	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
585	ENDIF
586
587	!
588	!-- DATA output
589	WRITE ( io, 330 )
590	IF ( averaging_interval_pr /= 0.0 ) THEN
591	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
592	ENDIF
593
594	!
595	!-- 1D-profiles
596	dopr_chr = 'Profile:'
597	IF ( dopr_n /= 0 ) THEN
598	WRITE ( io, 331 )
599
600	output_format = ''
601	IF ( netcdf_output ) THEN
602	IF ( netcdf_64bit ) THEN
603	output_format = 'netcdf (64 bit offset)'
604	ELSE
605	output_format = 'netcdf'
606	ENDIF
607	ENDIF
608	IF ( profil_output ) THEN
609	IF ( netcdf_output ) THEN
610	output_format = TRIM( output_format ) // ' and profil'
611	ELSE
612	output_format = 'profil'
613	ENDIF
614	ENDIF
615	WRITE ( io, 345 ) output_format
616
617	DO i = 1, dopr_n
618	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
619	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
620	WRITE ( io, 332 ) dopr_chr
621	dopr_chr = ' :'
622	ENDIF
623	ENDDO
624
625	IF ( dopr_chr /= '' ) THEN
626	WRITE ( io, 332 ) dopr_chr
627	ENDIF
628	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
629	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
630	ENDIF
631
632	!
633	!-- 2D-arrays
634	DO av = 0, 1
635
636	i = 1
637	do2d_xy = ''
638	do2d_xz = ''
639	do2d_yz = ''
640	DO WHILE ( do2d(av,i) /= ' ' )
641
642	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
643	do2d_mode = do2d(av,i)(l-1:l)
644
645	SELECT CASE ( do2d_mode )
646	CASE ( 'xy' )
647	ll = LEN_TRIM( do2d_xy )
648	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
649	CASE ( 'xz' )
650	ll = LEN_TRIM( do2d_xz )
651	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
652	CASE ( 'yz' )
653	ll = LEN_TRIM( do2d_yz )
654	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
655	END SELECT
656
657	i = i + 1
658
659	ENDDO
660
661	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
662	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
663	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
664	( netcdf_output .OR. iso2d_output ) ) THEN
665
666	IF ( av == 0 ) THEN
667	WRITE ( io, 334 ) ''
668	ELSE
669	WRITE ( io, 334 ) '(time-averaged)'
670	ENDIF
671
672	IF ( do2d_at_begin ) THEN
673	begin_chr = 'and at the start'
674	ELSE
675	begin_chr = ''
676	ENDIF
677
678	output_format = ''
679	IF ( netcdf_output ) THEN
680	IF ( netcdf_64bit ) THEN
681	output_format = 'netcdf (64 bit offset)'
682	ELSE
683	output_format = 'netcdf'
684	ENDIF
685	ENDIF
686	IF ( iso2d_output ) THEN
687	IF ( netcdf_output ) THEN
688	output_format = TRIM( output_format ) // ' and iso2d'
689	ELSE
690	output_format = 'iso2d'
691	ENDIF
692	ENDIF
693	WRITE ( io, 345 ) output_format
694
695	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
696	i = 1
697	slices = '/'
698	coordinates = '/'
699	!
700	!-- Building strings with index and coordinate informations of the
701	!-- slices
702	DO WHILE ( section(i,1) /= -9999 )
703
704	WRITE (section_chr,'(I5)') section(i,1)
705	section_chr = ADJUSTL( section_chr )
706	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
707
708	IF ( section(i,1) == -1 ) THEN
709	WRITE (coor_chr,'(F10.1)') -1.0
710	ELSE
711	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
712	ENDIF
713	coor_chr = ADJUSTL( coor_chr )
714	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
715
716	i = i + 1
717	ENDDO
718	IF ( av == 0 ) THEN
719	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
720	TRIM( begin_chr ), 'k', TRIM( slices ), &
721	TRIM( coordinates )
722	IF ( skip_time_do2d_xy /= 0.0 ) THEN
723	WRITE ( io, 339 ) skip_time_do2d_xy
724	ENDIF
725	ELSE
726	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
727	TRIM( begin_chr ), averaging_interval, &
728	dt_averaging_input, 'k', TRIM( slices ), &
729	TRIM( coordinates )
730	IF ( skip_time_data_output_av /= 0.0 ) THEN
731	WRITE ( io, 339 ) skip_time_data_output_av
732	ENDIF
733	ENDIF
734
735	ENDIF
736
737	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
738	i = 1
739	slices = '/'
740	coordinates = '/'
741	!
742	!-- Building strings with index and coordinate informations of the
743	!-- slices
744	DO WHILE ( section(i,2) /= -9999 )
745
746	WRITE (section_chr,'(I5)') section(i,2)
747	section_chr = ADJUSTL( section_chr )
748	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
749
750	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
751	coor_chr = ADJUSTL( coor_chr )
752	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
753
754	i = i + 1
755	ENDDO
756	IF ( av == 0 ) THEN
757	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
758	TRIM( begin_chr ), 'j', TRIM( slices ), &
759	TRIM( coordinates )
760	IF ( skip_time_do2d_xz /= 0.0 ) THEN
761	WRITE ( io, 339 ) skip_time_do2d_xz
762	ENDIF
763	ELSE
764	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
765	TRIM( begin_chr ), averaging_interval, &
766	dt_averaging_input, 'j', TRIM( slices ), &
767	TRIM( coordinates )
768	IF ( skip_time_data_output_av /= 0.0 ) THEN
769	WRITE ( io, 339 ) skip_time_data_output_av
770	ENDIF
771	ENDIF
772	ENDIF
773
774	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
775	i = 1
776	slices = '/'
777	coordinates = '/'
778	!
779	!-- Building strings with index and coordinate informations of the
780	!-- slices
781	DO WHILE ( section(i,3) /= -9999 )
782
783	WRITE (section_chr,'(I5)') section(i,3)
784	section_chr = ADJUSTL( section_chr )
785	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
786
787	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
788	coor_chr = ADJUSTL( coor_chr )
789	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
790
791	i = i + 1
792	ENDDO
793	IF ( av == 0 ) THEN
794	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
795	TRIM( begin_chr ), 'i', TRIM( slices ), &
796	TRIM( coordinates )
797	IF ( skip_time_do2d_yz /= 0.0 ) THEN
798	WRITE ( io, 339 ) skip_time_do2d_yz
799	ENDIF
800	ELSE
801	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
802	TRIM( begin_chr ), averaging_interval, &
803	dt_averaging_input, 'i', TRIM( slices ), &
804	TRIM( coordinates )
805	IF ( skip_time_data_output_av /= 0.0 ) THEN
806	WRITE ( io, 339 ) skip_time_data_output_av
807	ENDIF
808	ENDIF
809	ENDIF
810
811	ENDIF
812
813	ENDDO
814
815	!
816	!-- 3d-arrays
817	DO av = 0, 1
818
819	i = 1
820	do3d_chr = ''
821	DO WHILE ( do3d(av,i) /= ' ' )
822
823	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
824	i = i + 1
825
826	ENDDO
827
828	IF ( do3d_chr /= '' ) THEN
829	IF ( av == 0 ) THEN
830	WRITE ( io, 336 ) ''
831	ELSE
832	WRITE ( io, 336 ) '(time-averaged)'
833	ENDIF
834
835	output_format = ''
836	IF ( netcdf_output ) THEN
837	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
838	output_format = 'netcdf (64 bit offset)'
839	ELSE
840	output_format = 'netcdf'
841	ENDIF
842	ENDIF
843	IF ( avs_output ) THEN
844	IF ( netcdf_output ) THEN
845	output_format = TRIM( output_format ) // ' and avs'
846	ELSE
847	output_format = 'avs'
848	ENDIF
849	ENDIF
850	WRITE ( io, 345 ) output_format
851
852	IF ( do3d_at_begin ) THEN
853	begin_chr = 'and at the start'
854	ELSE
855	begin_chr = ''
856	ENDIF
857	IF ( av == 0 ) THEN
858	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
859	zu(nz_do3d), nz_do3d
860	ELSE
861	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
862	TRIM( begin_chr ), averaging_interval, &
863	dt_averaging_input, zu(nz_do3d), nz_do3d
864	ENDIF
865
866	IF ( do3d_compress ) THEN
867	do3d_chr = ''
868	i = 1
869	DO WHILE ( do3d(av,i) /= ' ' )
870
871	SELECT CASE ( do3d(av,i) )
872	CASE ( 'u' )
873	j = 1
874	CASE ( 'v' )
875	j = 2
876	CASE ( 'w' )
877	j = 3
878	CASE ( 'p' )
879	j = 4
880	CASE ( 'pt' )
881	j = 5
882	END SELECT
883	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
884	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
885	':' // prec // ','
886	i = i + 1
887
888	ENDDO
889	WRITE ( io, 338 ) do3d_chr
890
891	ENDIF
892
893	IF ( av == 0 ) THEN
894	IF ( skip_time_do3d /= 0.0 ) THEN
895	WRITE ( io, 339 ) skip_time_do3d
896	ENDIF
897	ELSE
898	IF ( skip_time_data_output_av /= 0.0 ) THEN
899	WRITE ( io, 339 ) skip_time_data_output_av
900	ENDIF
901	ENDIF
902
903	ENDIF
904
905	ENDDO
906
907	!
908	!-- Timeseries
909	IF ( dt_dots /= 9999999.9 ) THEN
910	WRITE ( io, 340 )
911
912	output_format = ''
913	IF ( netcdf_output ) THEN
914	IF ( netcdf_64bit ) THEN
915	output_format = 'netcdf (64 bit offset)'
916	ELSE
917	output_format = 'netcdf'
918	ENDIF
919	ENDIF
920	IF ( profil_output ) THEN
921	IF ( netcdf_output ) THEN
922	output_format = TRIM( output_format ) // ' and profil'
923	ELSE
924	output_format = 'profil'
925	ENDIF
926	ENDIF
927	WRITE ( io, 345 ) output_format
928	WRITE ( io, 341 ) dt_dots
929	ENDIF
930
931	#if defined( __dvrp_graphics )
932	!
933	!-- Dvrp-output
934	IF ( dt_dvrp /= 9999999.9 ) THEN
935	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
936	TRIM( dvrp_username ), TRIM( dvrp_directory )
937	i = 1
938	l = 0
939	DO WHILE ( mode_dvrp(i) /= ' ' )
940	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
941	READ ( mode_dvrp(i), '(10X,I2)' ) j
942	l = l + 1
943	IF ( do3d(0,j) /= ' ' ) THEN
944	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
945	ENDIF
946	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
947	READ ( mode_dvrp(i), '(6X,I2)' ) j
948	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
949	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
950	WRITE ( io, 363 )
951	ENDIF
952	i = i + 1
953	ENDDO
954	ENDIF
955	#endif
956
957	#if defined( __spectra )
958	!
959	!-- Spectra output
960	IF ( dt_dosp /= 9999999.9 ) THEN
961	WRITE ( io, 370 )
962
963	output_format = ''
964	IF ( netcdf_output ) THEN
965	IF ( netcdf_64bit ) THEN
966	output_format = 'netcdf (64 bit offset)'
967	ELSE
968	output_format = 'netcdf'
969	ENDIF
970	ENDIF
971	IF ( profil_output ) THEN
972	IF ( netcdf_output ) THEN
973	output_format = TRIM( output_format ) // ' and profil'
974	ELSE
975	output_format = 'profil'
976	ENDIF
977	ENDIF
978	WRITE ( io, 345 ) output_format
979	WRITE ( io, 371 ) dt_dosp
980	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
981	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
982	( spectra_direction(i), i = 1,10 ), &
983	( comp_spectra_level(i), i = 1,100 ), &
984	( plot_spectra_level(i), i = 1,100 ), &
985	averaging_interval_sp, dt_averaging_input_pr
986	ENDIF
987	#endif
988
989	WRITE ( io, 99 )
990
991	!
992	!-- Physical quantities
993	WRITE ( io, 400 )
994
995	!
996	!-- Geostrophic parameters
997	WRITE ( io, 410 ) omega, phi, f, fs
998
999	!
1000	!-- Other quantities
1001	WRITE ( io, 411 ) g
1002	IF ( use_reference ) THEN
1003	IF ( ocean ) THEN
1004	WRITE ( io, 412 ) prho_reference
1005	ELSE
1006	WRITE ( io, 413 ) pt_reference
1007	ENDIF
1008	ENDIF
1009
1010	!
1011	!-- Cloud physics parameters
1012	IF ( cloud_physics ) THEN
1013	WRITE ( io, 415 )
1014	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1015	ENDIF
1016
1017	!-- Profile of the geostrophic wind (component ug)
1018	!-- Building output strings
1019	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1020	gradients = '------'
1021	slices = ' 0'
1022	coordinates = ' 0.0'
1023	i = 1
1024	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1025
1026	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1027	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1028
1029	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1030	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1031
1032	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1033	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1034
1035	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1036	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1037
1038	i = i + 1
1039	ENDDO
1040
1041	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1042	TRIM( gradients ), TRIM( slices )
1043
1044	!-- Profile of the geostrophic wind (component vg)
1045	!-- Building output strings
1046	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1047	gradients = '------'
1048	slices = ' 0'
1049	coordinates = ' 0.0'
1050	i = 1
1051	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1052
1053	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1054	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1055
1056	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1057	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1058
1059	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1060	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1061
1062	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1063	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1064
1065	i = i + 1
1066	ENDDO
1067
1068	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1069	TRIM( gradients ), TRIM( slices )
1070
1071	!
1072	!-- Initial temperature profile
1073	!-- Building output strings, starting with surface temperature
1074	WRITE ( temperatures, '(F6.2)' ) pt_surface
1075	gradients = '------'
1076	slices = ' 0'
1077	coordinates = ' 0.0'
1078	i = 1
1079	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1080
1081	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1082	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1083
1084	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1085	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1086
1087	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1088	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1089
1090	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1091	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1092
1093	i = i + 1
1094	ENDDO
1095
1096	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1097	TRIM( gradients ), TRIM( slices )
1098
1099	!
1100	!-- Initial humidity profile
1101	!-- Building output strings, starting with surface humidity
1102	IF ( humidity .OR. passive_scalar ) THEN
1103	WRITE ( temperatures, '(E8.1)' ) q_surface
1104	gradients = '--------'
1105	slices = ' 0'
1106	coordinates = ' 0.0'
1107	i = 1
1108	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1109
1110	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1111	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1112
1113	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1114	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1115
1116	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1117	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1118
1119	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1120	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1121
1122	i = i + 1
1123	ENDDO
1124
1125	IF ( humidity ) THEN
1126	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1127	TRIM( gradients ), TRIM( slices )
1128	ELSE
1129	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1130	TRIM( gradients ), TRIM( slices )
1131	ENDIF
1132	ENDIF
1133
1134	!
1135	!-- Initial salinity profile
1136	!-- Building output strings, starting with surface salinity
1137	IF ( ocean ) THEN
1138	WRITE ( temperatures, '(F6.2)' ) sa_surface
1139	gradients = '------'
1140	slices = ' 0'
1141	coordinates = ' 0.0'
1142	i = 1
1143	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1144
1145	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1146	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1147
1148	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1149	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1150
1151	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1152	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1153
1154	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1155	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1156
1157	i = i + 1
1158	ENDDO
1159
1160	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1161	TRIM( gradients ), TRIM( slices )
1162	ENDIF
1163
1164	!
1165	!-- LES / turbulence parameters
1166	WRITE ( io, 450 )
1167
1168	!--
1169	! ... LES-constants used must still be added here
1170	!--
1171	IF ( constant_diffusion ) THEN
1172	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1173	prandtl_number
1174	ENDIF
1175	IF ( .NOT. constant_diffusion) THEN
1176	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1177	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1178	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1179	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1180	ENDIF
1181
1182	!
1183	!-- Special actions during the run
1184	WRITE ( io, 470 )
1185	IF ( create_disturbances ) THEN
1186	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1187	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1188	zu(disturbance_level_ind_t), disturbance_level_ind_t
1189	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1190	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1191	ELSE
1192	WRITE ( io, 473 ) disturbance_energy_limit
1193	ENDIF
1194	WRITE ( io, 474 ) TRIM( random_generator )
1195	ENDIF
1196	IF ( pt_surface_initial_change /= 0.0 ) THEN
1197	WRITE ( io, 475 ) pt_surface_initial_change
1198	ENDIF
1199	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1200	WRITE ( io, 476 ) q_surface_initial_change
1201	ENDIF
1202	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1203	WRITE ( io, 477 ) q_surface_initial_change
1204	ENDIF
1205
1206	IF ( particle_advection ) THEN
1207	!
1208	!-- Particle attributes
1209	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1210	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1211	end_time_prel, dt_sort_particles
1212	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1213	IF ( random_start_position ) WRITE ( io, 481 )
1214	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1215	WRITE ( io, 495 ) total_number_of_particles
1216	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1217	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1218	WRITE ( io, 483 ) maximum_number_of_tailpoints
1219	IF ( minimum_tailpoint_distance /= 0 ) THEN
1220	WRITE ( io, 484 ) total_number_of_tails, &
1221	minimum_tailpoint_distance, &
1222	maximum_tailpoint_age
1223	ENDIF
1224	ENDIF
1225	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1226	WRITE ( io, 485 ) dt_write_particle_data
1227	output_format = ''
1228	IF ( netcdf_output ) THEN
1229	IF ( netcdf_64bit ) THEN
1230	output_format = 'netcdf (64 bit offset) and binary'
1231	ELSE
1232	output_format = 'netcdf and binary'
1233	ENDIF
1234	ELSE
1235	output_format = 'binary'
1236	ENDIF
1237	WRITE ( io, 345 ) output_format
1238	ENDIF
1239	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1240	IF ( write_particle_statistics ) WRITE ( io, 486 )
1241
1242	WRITE ( io, 487 ) number_of_particle_groups
1243
1244	DO i = 1, number_of_particle_groups
1245	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1246	WRITE ( io, 490 ) i, 0.0
1247	WRITE ( io, 492 )
1248	ELSE
1249	WRITE ( io, 490 ) i, radius(i)
1250	IF ( density_ratio(i) /= 0.0 ) THEN
1251	WRITE ( io, 491 ) density_ratio(i)
1252	ELSE
1253	WRITE ( io, 492 )
1254	ENDIF
1255	ENDIF
1256	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1257	pdx(i), pdy(i), pdz(i)
1258	ENDDO
1259
1260	ENDIF
1261
1262
1263	!
1264	!-- Parameters of 1D-model
1265	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1266	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1267	mixing_length_1d, dissipation_1d
1268	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1269	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1270	ENDIF
1271	ENDIF
1272
1273	!
1274	!-- User-defined informations
1275	CALL user_header( io )
1276
1277	WRITE ( io, 99 )
1278
1279	!
1280	!-- Write buffer contents to disc immediately
1281	CALL local_flush( io )
1282
1283	!
1284	!-- Here the FORMATs start
1285
1286	99 FORMAT (1X,78('-'))
1287	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1288	1X,'* ',A,' *',9X,A/ &
1289	1X,'***************************',9X,42('-'))
1290	101 FORMAT (37X,'coupled run: ',A/ &
1291	37X,42('-'))
1292	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1293	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1294	' Run on host: ',A10)
1295	#if defined( __parallel )
1296	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1297	')',1X,A)
1298	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1299	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1300	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1301	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1302	37X,'because the job is running on an SMP-cluster')
1303	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1304	#endif
1305	110 FORMAT (/' Numerical Schemes:'/ &
1306	' -----------------'/)
1307	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1308	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1309	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1310	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1311	' or Upstream')
1312	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1313	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1314	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1315	' or Upstream')
1316	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1317	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1318	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1319	' Translation velocity = ',A/ &
1320	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1321	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1322	' of timestep changes)')
1323	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1324	' timestep changes')
1325	122 FORMAT (' --> Time differencing scheme: ',A)
1326	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1327	' maximum damping coefficient: ',F5.3, ' 1/s')
1328	124 FORMAT (' Spline-overshoots are being suppressed')
1329	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1330	' of'/ &
1331	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1332	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1333	' of'/ &
1334	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1335	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1336	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1337	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1338	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1339	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1340	130 FORMAT (' --> Additional prognostic equation for the total water content')
1341	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1342	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1343	' effective emissivity scheme')
1344	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1345	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1346	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1347	A,'-cycle)'/ &
1348	' number of grid levels: ',I2/ &
1349	' Gauss-Seidel red/black iterations: ',I2)
1350	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1351	I3,')')
1352	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1353	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1354	I3,')'/ &
1355	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1356	I3,')')
1357	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1358	139 FORMAT (' --> Loop optimization method: ',A)
1359	140 FORMAT (' maximum residual allowed: ',E10.3)
1360	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1361	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1362	'step')
1363	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1364	'kinetic energy')
1365	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1366	'conserved')
1367	200 FORMAT (//' Run time and time step information:'/ &
1368	' ----------------------------------'/)
1369	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1370	' CFL-factor: ',F4.2)
1371	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1372	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1373	' End time: ',F9.3,' s')
1374	204 FORMAT ( A,F9.3,' s')
1375	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1376	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1377	' CPU-time used: ',F9.3,' s per timestep: ', &
1378	' ',F9.3,' s'/ &
1379	' per second of simulated tim', &
1380	'e: ',F9.3,' s')
1381	250 FORMAT (//' Computational grid and domain size:'/ &
1382	' ----------------------------------'// &
1383	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1384	' m dz = ',F7.3,' m'/ &
1385	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1386	' m z(u) = ',F10.3,' m'/)
1387	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1388	' factor: ',F5.3/ &
1389	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1390	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1391	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1392	255 FORMAT (' Subdomains have equal size')
1393	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1394	'have smaller sizes'/ &
1395	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1396	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1397	' degrees')
1398	270 FORMAT (//' Topography informations:'/ &
1399	' -----------------------'// &
1400	1X,'Topography: ',A)
1401	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1402	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1403	' / ',I4)
1404	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1405	' ------------------------------'// &
1406	' Canopy mode: ', A / &
1407	' Canopy top: ',I4 / &
1408	' Leaf drag coefficient: ',F6.2 /)
1409	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1410	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1411	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1412	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1413	' Height: ',A,' m'/ &
1414	' Leaf area density: ',A,' m2/m3'/ &
1415	' Gradient: ',A,' m2/m4'/ &
1416	' Gridpoint: ',A)
1417
1418	300 FORMAT (//' Boundary conditions:'/ &
1419	' -------------------'// &
1420	' p uv ', &
1421	' pt'// &
1422	' B. bound.: ',A/ &
1423	' T. bound.: ',A)
1424	301 FORMAT (/' ',A// &
1425	' B. bound.: ',A/ &
1426	' T. bound.: ',A)
1427	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1428	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1429	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1430	'computational u,v-level:'// &
1431	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1432	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1433	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1434	307 FORMAT (' Heatflux has a random normal distribution')
1435	308 FORMAT (' Predefined surface temperature')
1436	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1437	310 FORMAT (//' 1D-Model:'// &
1438	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1439	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1440	312 FORMAT (' Predefined surface humidity')
1441	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1442	314 FORMAT (' Predefined scalar value at the surface')
1443	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1444	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1445	'atmosphere model')
1446	317 FORMAT (//' Lateral boundaries:'/ &
1447	' left/right: ',A/ &
1448	' north/south: ',A)
1449	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1450	'max =',F5.1,' m**2/s')
1451	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1452	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1453	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1454	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1455	' v: ',F9.6,' m2/s2')
1456	325 FORMAT (//' List output:'/ &
1457	' -----------'// &
1458	' 1D-Profiles:'/ &
1459	' Output every ',F8.2,' s')
1460	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1461	' Averaging input every ',F8.2,' s')
1462	330 FORMAT (//' Data output:'/ &
1463	' -----------'/)
1464	331 FORMAT (/' 1D-Profiles:')
1465	332 FORMAT (/' ',A)
1466	333 FORMAT (' Output every ',F8.2,' s',/ &
1467	' Time averaged over ',F8.2,' s'/ &
1468	' Averaging input every ',F8.2,' s')
1469	334 FORMAT (/' 2D-Arrays',A,':')
1470	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1471	' Output every ',F8.2,' s ',A/ &
1472	' Cross sections at ',A1,' = ',A/ &
1473	' scalar-coordinates: ',A,' m'/)
1474	336 FORMAT (/' 3D-Arrays',A,':')
1475	337 FORMAT (/' Arrays: ',A/ &
1476	' Output every ',F8.2,' s ',A/ &
1477	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1478	338 FORMAT (' Compressed data output'/ &
1479	' Decimal precision: ',A/)
1480	339 FORMAT (' No output during initial ',F8.2,' s')
1481	340 FORMAT (/' Time series:')
1482	341 FORMAT (' Output every ',F8.2,' s'/)
1483	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1484	' Output every ',F8.2,' s ',A/ &
1485	' Time averaged over ',F8.2,' s'/ &
1486	' Averaging input every ',F8.2,' s'/ &
1487	' Cross sections at ',A1,' = ',A/ &
1488	' scalar-coordinates: ',A,' m'/)
1489	343 FORMAT (/' Arrays: ',A/ &
1490	' Output every ',F8.2,' s ',A/ &
1491	' Time averaged over ',F8.2,' s'/ &
1492	' Averaging input every ',F8.2,' s'/ &
1493	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1494	345 FORMAT (' Output format: ',A/)
1495	#if defined( __dvrp_graphics )
1496	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1497	' Output every ',F7.1,' s'/ &
1498	' Output mode: ',A/ &
1499	' Host / User: ',A,' / ',A/ &
1500	' Directory: ',A// &
1501	' The sequence contains:')
1502	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1503	362 FORMAT (' Sectional plane ',A)
1504	363 FORMAT (' Particles')
1505	#endif
1506	#if defined( __spectra )
1507	370 FORMAT (' Spectra:')
1508	371 FORMAT (' Output every ',F7.1,' s'/)
1509	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1510	' Directions: ', 10(A5,',')/ &
1511	' height levels k = ', 20(I3,',')/ &
1512	' ', 20(I3,',')/ &
1513	' ', 20(I3,',')/ &
1514	' ', 20(I3,',')/ &
1515	' ', 19(I3,','),I3,'.'/ &
1516	' height levels selected for standard plot:'/ &
1517	' k = ', 20(I3,',')/ &
1518	' ', 20(I3,',')/ &
1519	' ', 20(I3,',')/ &
1520	' ', 20(I3,',')/ &
1521	' ', 19(I3,','),I3,'.'/ &
1522	' Time averaged over ', F7.1, ' s,' / &
1523	' Profiles for the time averaging are taken every ', &
1524	F6.1,' s')
1525	#endif
1526	400 FORMAT (//' Physical quantities:'/ &
1527	' -------------------'/)
1528	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1529	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1530	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1531	' f* = ',F9.6,' 1/s')
1532	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1533	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1534	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1535	415 FORMAT (/' Cloud physics parameters:'/ &
1536	' ------------------------'/)
1537	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1538	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1539	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1540	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1541	' Vapourization heat : L_v = ',E8.2,' J/kg')
1542	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1543	' Height: ',A,' m'/ &
1544	' Temperature: ',A,' K'/ &
1545	' Gradient: ',A,' K/100m'/ &
1546	' Gridpoint: ',A)
1547	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1548	' Height: ',A,' m'/ &
1549	' Humidity: ',A,' kg/kg'/ &
1550	' Gradient: ',A,' (kg/kg)/100m'/ &
1551	' Gridpoint: ',A)
1552	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1553	' Height: ',A,' m'/ &
1554	' Scalar concentration: ',A,' kg/m**3'/ &
1555	' Gradient: ',A,' (kg/m**3)/100m'/ &
1556	' Gridpoint: ',A)
1557	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1558	' Height: ',A,' m'/ &
1559	' ug: ',A,' m/s'/ &
1560	' Gradient: ',A,' 1/100s'/ &
1561	' Gridpoint: ',A)
1562	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1563	' Height: ',A,' m'/ &
1564	' vg: ',A,' m/s'/ &
1565	' Gradient: ',A,' 1/100s'/ &
1566	' Gridpoint: ',A)
1567	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1568	' Height: ',A,' m'/ &
1569	' Salinity: ',A,' psu'/ &
1570	' Gradient: ',A,' psu/100m'/ &
1571	' Gridpoint: ',A)
1572	450 FORMAT (//' LES / Turbulence quantities:'/ &
1573	' ---------------------------'/)
1574	451 FORMAT (' Diffusion coefficients are constant:'/ &
1575	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1576	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1577	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1578	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1579	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1580	470 FORMAT (//' Actions during the simulation:'/ &
1581	' -----------------------------'/)
1582	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1583	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1584	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1585	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1586	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1587	' to i/j =',I4)
1588	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1589	1X,F5.3, ' m2/s2')
1590	474 FORMAT (' Random number generator used : ',A/)
1591	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1592	'respectively, if'/ &
1593	' the value is negative) by ',F5.2,' K at the beginning of the',&
1594	' 3D-simulation'/)
1595	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1596	'respectively, if the'/ &
1597	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1598	' the 3D-simulation'/)
1599	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1600	'respectively, if the'/ &
1601	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1602	' the 3D-simulation'/)
1603	480 FORMAT (' Particles:'/ &
1604	' ---------'// &
1605	' Particle advection is active (switched on at t = ', F7.1, &
1606	' s)'/ &
1607	' Start of new particle generations every ',F6.1,' s'/ &
1608	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1609	' bottom: ', A, ' top: ', A/&
1610	' Maximum particle age: ',F9.1,' s'/ &
1611	' Advection stopped at t = ',F9.1,' s'/ &
1612	' Particles are sorted every ',F9.1,' s'/)
1613	481 FORMAT (' Particles have random start positions'/)
1614	482 FORMAT (' Particles are advected only horizontally'/)
1615	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1616	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1617	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1618	' Maximum age of the end of the tail: ',F8.2,' s')
1619	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1620	486 FORMAT (' Particle statistics are written on file'/)
1621	487 FORMAT (' Number of particle groups: ',I2/)
1622	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1623	' minimum timestep for advection: ', F7.5/)
1624	489 FORMAT (' Number of particles simultaneously released at each ', &
1625	'point: ', I5/)
1626	490 FORMAT (' Particle group ',I2,':'/ &
1627	' Particle radius: ',E10.3, 'm')
1628	491 FORMAT (' Particle inertia is activated'/ &
1629	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1630	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1631	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1632	' y:',F8.1,' - ',F8.1,' m'/&
1633	' z:',F8.1,' - ',F8.1,' m'/&
1634	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1635	' m dz = ',F8.1,' m'/)
1636	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1637	F8.2,' s'/)
1638	495 FORMAT (' Number of particles in total domain: ',I10/)
1639	500 FORMAT (//' 1D-Model parameters:'/ &
1640	' -------------------'// &
1641	' Simulation time: ',F8.1,' s'/ &
1642	' Run-controll output every: ',F8.1,' s'/ &
1643	' Vertical profile output every: ',F8.1,' s'/ &
1644	' Mixing length calculation: ',A/ &
1645	' Dissipation calculation: ',A/)
1646	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1647
1648
1649	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |