Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 222

Last change on this file since 222 was 206, checked in by raasch, 16 years ago
ocean-atmosphere coupling realized with MPI-1, adjustments in mrun, mbuild, subjob for lcxt4
Property svn:keywords set to `Id`
File size: 63.2 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Bugfix: error in zu index in case of section_xy = -1
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 206 2008-10-13 14:59:11Z letzel $
11	!
12	! 198 2008-09-17 08:55:28Z raasch
13	! Format adjustments allowing output of larger revision numbers
14	!
15	! 197 2008-09-16 15:29:03Z raasch
16	! allow 100 spectra levels instead of 10 for consistency with
17	! define_netcdf_header,
18	! bugfix in the output of the characteristic levels of potential temperature,
19	! geostrophic wind, scalar concentration, humidity and leaf area density,
20	! output of turbulence recycling informations
21	!
22	! 138 2007-11-28 10:03:58Z letzel
23	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
24	! Allow two instead of one digit to specify isosurface and slicer variables.
25	! Output of sorting frequency of particles
26	!
27	! 108 2007-08-24 15:10:38Z letzel
28	! Output of informations for coupled model runs (boundary conditions etc.)
29	! + output of momentumfluxes at the top boundary
30	! Rayleigh damping for ocean, e_init
31	!
32	! 97 2007-06-21 08:23:15Z raasch
33	! Adjustments for the ocean version.
34	! use_pt_reference renamed use_reference
35	!
36	! 87 2007-05-22 15:46:47Z raasch
37	! Bugfix: output of use_upstream_for_tke
38	!
39	! 82 2007-04-16 15:40:52Z raasch
40	! Preprocessor strings for different linux clusters changed to "lc",
41	! routine local_flush is used for buffer flushing
42	!
43	! 76 2007-03-29 00:58:32Z raasch
44	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
45	! output of the loop optimization method, moisture renamed humidity,
46	! output of subversion revision number
47	!
48	! 19 2007-02-23 04:53:48Z raasch
49	! Output of scalar flux applied at top boundary
50	!
51	! RCS Log replace by Id keyword, revision history cleaned up
52	!
53	! Revision 1.63 2006/08/22 13:53:13 raasch
54	! Output of dz_max
55	!
56	! Revision 1.1 1997/08/11 06:17:20 raasch
57	! Initial revision
58	!
59	!
60	! Description:
61	! ------------
62	! Writing a header with all important informations about the actual run.
63	! This subroutine is called three times, two times at the beginning
64	! (writing information on files RUN_CONTROL and HEADER) and one time at the
65	! end of the run, then writing additional information about CPU-usage on file
66	! header.
67	!------------------------------------------------------------------------------!
68
69	USE arrays_3d
70	USE control_parameters
71	USE cloud_parameters
72	USE cpulog
73	USE dvrp_variables
74	USE grid_variables
75	USE indices
76	USE model_1d
77	USE particle_attributes
78	USE pegrid
79	USE spectrum
80
81	IMPLICIT NONE
82
83	CHARACTER (LEN=1) :: prec
84	CHARACTER (LEN=2) :: do2d_mode
85	CHARACTER (LEN=5) :: section_chr
86	CHARACTER (LEN=9) :: time_to_string
87	CHARACTER (LEN=10) :: coor_chr, host_chr
88	CHARACTER (LEN=16) :: begin_chr
89	CHARACTER (LEN=23) :: ver_rev
90	CHARACTER (LEN=40) :: output_format
91	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
92	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
93	run_classification
94	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
95	temperatures, ugcomponent, vgcomponent
96	CHARACTER (LEN=85) :: roben, runten
97
98	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
99	REAL :: cpuseconds_per_simulated_second
100
101	!
102	!-- Open the output file. At the end of the simulation, output is directed
103	!-- to unit 19.
104	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
105	.NOT. simulated_time_at_begin /= simulated_time ) THEN
106	io = 15 ! header output on file RUN_CONTROL
107	ELSE
108	io = 19 ! header output on file HEADER
109	ENDIF
110	CALL check_open( io )
111
112	!
113	!-- At the end of the run, output file (HEADER) will be rewritten with
114	!-- new informations
115	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
116
117	!
118	!-- Determine kind of model run
119	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
120	run_classification = '3D - restart run'
121	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
122	run_classification = '3D - run using 3D - prerun data'
123	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
124	run_classification = '3D - run without 1D - prerun'
125	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
126	run_classification = '3D - run with 1D - prerun'
127	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
128	run_classification = '3D - run initialized by user'
129	ELSE
130	PRINT*,'+++ header: unknown action(s): ',initializing_actions
131	ENDIF
132	IF ( ocean ) THEN
133	run_classification = 'ocean - ' // run_classification
134	ELSE
135	run_classification = 'atmosphere - ' // run_classification
136	ENDIF
137
138	!
139	!-- Run-identification, date, time, host
140	host_chr = host(1:10)
141	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
142	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
143	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
144	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
145	ADJUSTR( host_chr )
146	#if defined( __parallel )
147	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
148	char1 = 'calculated'
149	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
150	host(1:2) == 'lc' ) .AND. &
151	npex == -1 .AND. pdims(2) == 1 ) THEN
152	char1 = 'forced'
153	ELSE
154	char1 = 'predefined'
155	ENDIF
156	IF ( threads_per_task == 1 ) THEN
157	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
158	ELSE
159	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
160	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
161	ENDIF
162	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
163	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
164	npex == -1 .AND. pdims(2) == 1 ) &
165	THEN
166	WRITE ( io, 106 )
167	ELSEIF ( pdims(2) == 1 ) THEN
168	WRITE ( io, 107 ) 'x'
169	ELSEIF ( pdims(1) == 1 ) THEN
170	WRITE ( io, 107 ) 'y'
171	ENDIF
172	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
173	#endif
174	WRITE ( io, 99 )
175
176	!
177	!-- Numerical schemes
178	WRITE ( io, 110 )
179	IF ( psolver(1:7) == 'poisfft' ) THEN
180	WRITE ( io, 111 ) TRIM( fft_method )
181	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
182	ELSEIF ( psolver == 'sor' ) THEN
183	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
184	ELSEIF ( psolver == 'multigrid' ) THEN
185	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
186	IF ( mg_cycles == -1 ) THEN
187	WRITE ( io, 140 ) residual_limit
188	ELSE
189	WRITE ( io, 141 ) mg_cycles
190	ENDIF
191	IF ( mg_switch_to_pe0_level == 0 ) THEN
192	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
193	nzt_mg(1)
194	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
195	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
196	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
197	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
198	nzt_mg(mg_switch_to_pe0_level), &
199	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
200	nzt_mg(1)
201	ENDIF
202	ENDIF
203	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
204	THEN
205	WRITE ( io, 142 )
206	ENDIF
207
208	IF ( momentum_advec == 'pw-scheme' ) THEN
209	WRITE ( io, 113 )
210	ELSE
211	WRITE ( io, 114 )
212	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
213	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
214	overshoot_limit_w /= 0.0 ) THEN
215	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
216	overshoot_limit_w
217	ENDIF
218	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
219	ups_limit_w /= 0.0 ) &
220	THEN
221	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
222	ENDIF
223	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
224	ENDIF
225	IF ( scalar_advec == 'pw-scheme' ) THEN
226	WRITE ( io, 116 )
227	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
228	WRITE ( io, 117 )
229	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
230	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
231	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
232	ENDIF
233	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
234	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
235	ENDIF
236	ELSE
237	WRITE ( io, 118 )
238	ENDIF
239
240	WRITE ( io, 139 ) TRIM( loop_optimization )
241
242	IF ( galilei_transformation ) THEN
243	IF ( use_ug_for_galilei_tr ) THEN
244	char1 = 'geostrophic wind'
245	ELSE
246	char1 = 'mean wind in model domain'
247	ENDIF
248	IF ( simulated_time_at_begin == simulated_time ) THEN
249	char2 = 'at the start of the run'
250	ELSE
251	char2 = 'at the end of the run'
252	ENDIF
253	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
254	advected_distance_x/1000.0, advected_distance_y/1000.0
255	ENDIF
256	IF ( timestep_scheme == 'leapfrog' ) THEN
257	WRITE ( io, 120 )
258	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
259	WRITE ( io, 121 )
260	ELSE
261	WRITE ( io, 122 ) timestep_scheme
262	ENDIF
263	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
264	IF ( rayleigh_damping_factor /= 0.0 ) THEN
265	IF ( .NOT. ocean ) THEN
266	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
267	rayleigh_damping_factor
268	ELSE
269	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
270	rayleigh_damping_factor
271	ENDIF
272	ENDIF
273	IF ( humidity ) THEN
274	IF ( .NOT. cloud_physics ) THEN
275	WRITE ( io, 129 )
276	ELSE
277	WRITE ( io, 130 )
278	WRITE ( io, 131 )
279	IF ( radiation ) WRITE ( io, 132 )
280	IF ( precipitation ) WRITE ( io, 133 )
281	ENDIF
282	ENDIF
283	IF ( passive_scalar ) WRITE ( io, 134 )
284	IF ( conserve_volume_flow ) WRITE ( io, 150 )
285	WRITE ( io, 99 )
286
287	!
288	!-- Runtime and timestep informations
289	WRITE ( io, 200 )
290	IF ( .NOT. dt_fixed ) THEN
291	WRITE ( io, 201 ) dt_max, cfl_factor
292	ELSE
293	WRITE ( io, 202 ) dt
294	ENDIF
295	WRITE ( io, 203 ) simulated_time_at_begin, end_time
296
297	IF ( time_restart /= 9999999.9 .AND. &
298	simulated_time_at_begin == simulated_time ) THEN
299	IF ( dt_restart == 9999999.9 ) THEN
300	WRITE ( io, 204 ) ' Restart at: ',time_restart
301	ELSE
302	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
303	ENDIF
304	ENDIF
305
306	IF ( simulated_time_at_begin /= simulated_time ) THEN
307	i = MAX ( log_point_s(10)%counts, 1 )
308	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
309	cpuseconds_per_simulated_second = 0.0
310	ELSE
311	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
312	( simulated_time - &
313	simulated_time_at_begin )
314	ENDIF
315	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
316	log_point_s(10)%sum / REAL( i ), &
317	cpuseconds_per_simulated_second
318	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
319	IF ( dt_restart == 9999999.9 ) THEN
320	WRITE ( io, 204 ) ' Next restart at: ',time_restart
321	ELSE
322	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
323	ENDIF
324	ENDIF
325	ENDIF
326
327	!
328	!-- Computational grid
329	IF ( .NOT. ocean ) THEN
330	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
331	IF ( dz_stretch_level_index < nzt+1 ) THEN
332	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
333	dz_stretch_factor, dz_max
334	ENDIF
335	ELSE
336	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
337	IF ( dz_stretch_level_index > 0 ) THEN
338	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
339	dz_stretch_factor, dz_max
340	ENDIF
341	ENDIF
342	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
343	MIN( nnz+2, nzt+2 )
344	IF ( numprocs > 1 ) THEN
345	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
346	WRITE ( io, 255 )
347	ELSE
348	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
349	ENDIF
350	ENDIF
351	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
352
353	!
354	!-- Topography
355	WRITE ( io, 270 ) topography
356	SELECT CASE ( TRIM( topography ) )
357
358	CASE ( 'flat' )
359	! no actions necessary
360
361	CASE ( 'single_building' )
362	blx = INT( building_length_x / dx )
363	bly = INT( building_length_y / dy )
364	bh = INT( building_height / dz )
365
366	IF ( building_wall_left == 9999999.9 ) THEN
367	building_wall_left = ( nx + 1 - blx ) / 2 * dx
368	ENDIF
369	bxl = INT ( building_wall_left / dx + 0.5 )
370	bxr = bxl + blx
371
372	IF ( building_wall_south == 9999999.9 ) THEN
373	building_wall_south = ( ny + 1 - bly ) / 2 * dy
374	ENDIF
375	bys = INT ( building_wall_south / dy + 0.5 )
376	byn = bys + bly
377
378	WRITE ( io, 271 ) building_length_x, building_length_y, &
379	building_height, bxl, bxr, bys, byn
380
381	END SELECT
382
383	IF ( plant_canopy ) THEN
384
385	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
386	IF ( passive_scalar ) THEN
387	WRITE ( io, 281 ) scalar_exchange_coefficient, &
388	leaf_surface_concentration
389	ENDIF
390
391	!
392	!-- Heat flux at the top of vegetation
393	WRITE ( io, 282 ) cthf
394
395	!
396	!-- Leaf area density profile
397	!-- Building output strings, starting with surface value
398	WRITE ( learde, '(F6.2)' ) lad_surface
399	gradients = '------'
400	slices = ' 0'
401	coordinates = ' 0.0'
402	i = 1
403	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
404
405	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
406	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
407
408	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
409	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
410
411	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
412	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
413
414	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
415	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
416
417	i = i + 1
418	ENDDO
419
420	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
421	TRIM( gradients ), TRIM( slices )
422
423	ENDIF
424
425	!
426	!-- Boundary conditions
427	IF ( ibc_p_b == 0 ) THEN
428	runten = 'p(0) = 0 \|'
429	ELSEIF ( ibc_p_b == 1 ) THEN
430	runten = 'p(0) = p(1) \|'
431	ELSE
432	runten = 'p(0) = p(1) +R\|'
433	ENDIF
434	IF ( ibc_p_t == 0 ) THEN
435	roben = 'p(nzt+1) = 0 \|'
436	ELSE
437	roben = 'p(nzt+1) = p(nzt) \|'
438	ENDIF
439
440	IF ( ibc_uv_b == 0 ) THEN
441	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
442	ELSE
443	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
444	ENDIF
445	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
446	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
447	ELSEIF ( ibc_uv_t == 0 ) THEN
448	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
449	ELSE
450	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
451	ENDIF
452
453	IF ( ibc_pt_b == 0 ) THEN
454	runten = TRIM( runten ) // ' pt(0) = pt_surface'
455	ELSEIF ( ibc_pt_b == 1 ) THEN
456	runten = TRIM( runten ) // ' pt(0) = pt(1)'
457	ELSEIF ( ibc_pt_b == 2 ) THEN
458	runten = TRIM( runten ) // ' pt(0) = from coupled model'
459	ENDIF
460	IF ( ibc_pt_t == 0 ) THEN
461	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
462	ELSEIF( ibc_pt_t == 1 ) THEN
463	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
464	ELSEIF( ibc_pt_t == 2 ) THEN
465	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
466	ENDIF
467
468	WRITE ( io, 300 ) runten, roben
469
470	IF ( .NOT. constant_diffusion ) THEN
471	IF ( ibc_e_b == 1 ) THEN
472	runten = 'e(0) = e(1)'
473	ELSE
474	runten = 'e(0) = e(1) = (u/0.1)*2'
475	ENDIF
476	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
477
478	WRITE ( io, 301 ) 'e', runten, roben
479
480	ENDIF
481
482	IF ( ocean ) THEN
483	runten = 'sa(0) = sa(1)'
484	IF ( ibc_sa_t == 0 ) THEN
485	roben = 'sa(nzt+1) = sa_surface'
486	ELSE
487	roben = 'sa(nzt+1) = sa(nzt)'
488	ENDIF
489	WRITE ( io, 301 ) 'sa', runten, roben
490	ENDIF
491
492	IF ( humidity ) THEN
493	IF ( ibc_q_b == 0 ) THEN
494	runten = 'q(0) = q_surface'
495	ELSE
496	runten = 'q(0) = q(1)'
497	ENDIF
498	IF ( ibc_q_t == 0 ) THEN
499	roben = 'q(nzt) = q_top'
500	ELSE
501	roben = 'q(nzt) = q(nzt-1) + dq/dz'
502	ENDIF
503	WRITE ( io, 301 ) 'q', runten, roben
504	ENDIF
505
506	IF ( passive_scalar ) THEN
507	IF ( ibc_q_b == 0 ) THEN
508	runten = 's(0) = s_surface'
509	ELSE
510	runten = 's(0) = s(1)'
511	ENDIF
512	IF ( ibc_q_t == 0 ) THEN
513	roben = 's(nzt) = s_top'
514	ELSE
515	roben = 's(nzt) = s(nzt-1) + ds/dz'
516	ENDIF
517	WRITE ( io, 301 ) 's', runten, roben
518	ENDIF
519
520	IF ( use_surface_fluxes ) THEN
521	WRITE ( io, 303 )
522	IF ( constant_heatflux ) THEN
523	WRITE ( io, 306 ) surface_heatflux
524	IF ( random_heatflux ) WRITE ( io, 307 )
525	ENDIF
526	IF ( humidity .AND. constant_waterflux ) THEN
527	WRITE ( io, 311 ) surface_waterflux
528	ENDIF
529	IF ( passive_scalar .AND. constant_waterflux ) THEN
530	WRITE ( io, 313 ) surface_waterflux
531	ENDIF
532	ENDIF
533
534	IF ( use_top_fluxes ) THEN
535	WRITE ( io, 304 )
536	IF ( coupling_mode == 'uncoupled' ) THEN
537	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
538	IF ( constant_top_heatflux ) THEN
539	WRITE ( io, 306 ) top_heatflux
540	ENDIF
541	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
542	WRITE ( io, 316 )
543	ENDIF
544	IF ( ocean .AND. constant_top_salinityflux ) THEN
545	WRITE ( io, 309 ) top_salinityflux
546	ENDIF
547	IF ( humidity .OR. passive_scalar ) THEN
548	WRITE ( io, 315 )
549	ENDIF
550	ENDIF
551
552	IF ( prandtl_layer ) THEN
553	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
554	rif_min, rif_max
555	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
556	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
557	WRITE ( io, 312 )
558	ENDIF
559	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
560	WRITE ( io, 314 )
561	ENDIF
562	ELSE
563	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
564	WRITE ( io, 310 ) rif_min, rif_max
565	ENDIF
566	ENDIF
567
568	WRITE ( io, 317 ) bc_lr, bc_ns
569	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
570	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
571	IF ( turbulent_inflow ) THEN
572	WRITE ( io, 319 ) recycling_width, recycling_plane, &
573	inflow_damping_height, inflow_damping_width
574	ENDIF
575	ENDIF
576
577	!
578	!-- Listing of 1D-profiles
579	WRITE ( io, 325 ) dt_dopr_listing
580	IF ( averaging_interval_pr /= 0.0 ) THEN
581	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
582	ENDIF
583
584	!
585	!-- DATA output
586	WRITE ( io, 330 )
587	IF ( averaging_interval_pr /= 0.0 ) THEN
588	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
589	ENDIF
590
591	!
592	!-- 1D-profiles
593	dopr_chr = 'Profile:'
594	IF ( dopr_n /= 0 ) THEN
595	WRITE ( io, 331 )
596
597	output_format = ''
598	IF ( netcdf_output ) THEN
599	IF ( netcdf_64bit ) THEN
600	output_format = 'netcdf (64 bit offset)'
601	ELSE
602	output_format = 'netcdf'
603	ENDIF
604	ENDIF
605	IF ( profil_output ) THEN
606	IF ( netcdf_output ) THEN
607	output_format = TRIM( output_format ) // ' and profil'
608	ELSE
609	output_format = 'profil'
610	ENDIF
611	ENDIF
612	WRITE ( io, 345 ) output_format
613
614	DO i = 1, dopr_n
615	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
616	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
617	WRITE ( io, 332 ) dopr_chr
618	dopr_chr = ' :'
619	ENDIF
620	ENDDO
621
622	IF ( dopr_chr /= '' ) THEN
623	WRITE ( io, 332 ) dopr_chr
624	ENDIF
625	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
626	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
627	ENDIF
628
629	!
630	!-- 2D-arrays
631	DO av = 0, 1
632
633	i = 1
634	do2d_xy = ''
635	do2d_xz = ''
636	do2d_yz = ''
637	DO WHILE ( do2d(av,i) /= ' ' )
638
639	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
640	do2d_mode = do2d(av,i)(l-1:l)
641
642	SELECT CASE ( do2d_mode )
643	CASE ( 'xy' )
644	ll = LEN_TRIM( do2d_xy )
645	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
646	CASE ( 'xz' )
647	ll = LEN_TRIM( do2d_xz )
648	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
649	CASE ( 'yz' )
650	ll = LEN_TRIM( do2d_yz )
651	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
652	END SELECT
653
654	i = i + 1
655
656	ENDDO
657
658	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
659	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
660	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
661	( netcdf_output .OR. iso2d_output ) ) THEN
662
663	IF ( av == 0 ) THEN
664	WRITE ( io, 334 ) ''
665	ELSE
666	WRITE ( io, 334 ) '(time-averaged)'
667	ENDIF
668
669	IF ( do2d_at_begin ) THEN
670	begin_chr = 'and at the start'
671	ELSE
672	begin_chr = ''
673	ENDIF
674
675	output_format = ''
676	IF ( netcdf_output ) THEN
677	IF ( netcdf_64bit ) THEN
678	output_format = 'netcdf (64 bit offset)'
679	ELSE
680	output_format = 'netcdf'
681	ENDIF
682	ENDIF
683	IF ( iso2d_output ) THEN
684	IF ( netcdf_output ) THEN
685	output_format = TRIM( output_format ) // ' and iso2d'
686	ELSE
687	output_format = 'iso2d'
688	ENDIF
689	ENDIF
690	WRITE ( io, 345 ) output_format
691
692	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
693	i = 1
694	slices = '/'
695	coordinates = '/'
696	!
697	!-- Building strings with index and coordinate informations of the
698	!-- slices
699	DO WHILE ( section(i,1) /= -9999 )
700
701	WRITE (section_chr,'(I5)') section(i,1)
702	section_chr = ADJUSTL( section_chr )
703	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
704
705	IF ( section(i,1) == -1 ) THEN
706	WRITE (coor_chr,'(F10.1)') -1.0
707	ELSE
708	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
709	ENDIF
710	coor_chr = ADJUSTL( coor_chr )
711	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
712
713	i = i + 1
714	ENDDO
715	IF ( av == 0 ) THEN
716	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
717	TRIM( begin_chr ), 'k', TRIM( slices ), &
718	TRIM( coordinates )
719	IF ( skip_time_do2d_xy /= 0.0 ) THEN
720	WRITE ( io, 339 ) skip_time_do2d_xy
721	ENDIF
722	ELSE
723	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
724	TRIM( begin_chr ), averaging_interval, &
725	dt_averaging_input, 'k', TRIM( slices ), &
726	TRIM( coordinates )
727	IF ( skip_time_data_output_av /= 0.0 ) THEN
728	WRITE ( io, 339 ) skip_time_data_output_av
729	ENDIF
730	ENDIF
731
732	ENDIF
733
734	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
735	i = 1
736	slices = '/'
737	coordinates = '/'
738	!
739	!-- Building strings with index and coordinate informations of the
740	!-- slices
741	DO WHILE ( section(i,2) /= -9999 )
742
743	WRITE (section_chr,'(I5)') section(i,2)
744	section_chr = ADJUSTL( section_chr )
745	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
746
747	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
748	coor_chr = ADJUSTL( coor_chr )
749	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
750
751	i = i + 1
752	ENDDO
753	IF ( av == 0 ) THEN
754	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
755	TRIM( begin_chr ), 'j', TRIM( slices ), &
756	TRIM( coordinates )
757	IF ( skip_time_do2d_xz /= 0.0 ) THEN
758	WRITE ( io, 339 ) skip_time_do2d_xz
759	ENDIF
760	ELSE
761	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
762	TRIM( begin_chr ), averaging_interval, &
763	dt_averaging_input, 'j', TRIM( slices ), &
764	TRIM( coordinates )
765	IF ( skip_time_data_output_av /= 0.0 ) THEN
766	WRITE ( io, 339 ) skip_time_data_output_av
767	ENDIF
768	ENDIF
769	ENDIF
770
771	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
772	i = 1
773	slices = '/'
774	coordinates = '/'
775	!
776	!-- Building strings with index and coordinate informations of the
777	!-- slices
778	DO WHILE ( section(i,3) /= -9999 )
779
780	WRITE (section_chr,'(I5)') section(i,3)
781	section_chr = ADJUSTL( section_chr )
782	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
783
784	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
785	coor_chr = ADJUSTL( coor_chr )
786	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
787
788	i = i + 1
789	ENDDO
790	IF ( av == 0 ) THEN
791	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
792	TRIM( begin_chr ), 'i', TRIM( slices ), &
793	TRIM( coordinates )
794	IF ( skip_time_do2d_yz /= 0.0 ) THEN
795	WRITE ( io, 339 ) skip_time_do2d_yz
796	ENDIF
797	ELSE
798	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
799	TRIM( begin_chr ), averaging_interval, &
800	dt_averaging_input, 'i', TRIM( slices ), &
801	TRIM( coordinates )
802	IF ( skip_time_data_output_av /= 0.0 ) THEN
803	WRITE ( io, 339 ) skip_time_data_output_av
804	ENDIF
805	ENDIF
806	ENDIF
807
808	ENDIF
809
810	ENDDO
811
812	!
813	!-- 3d-arrays
814	DO av = 0, 1
815
816	i = 1
817	do3d_chr = ''
818	DO WHILE ( do3d(av,i) /= ' ' )
819
820	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
821	i = i + 1
822
823	ENDDO
824
825	IF ( do3d_chr /= '' ) THEN
826	IF ( av == 0 ) THEN
827	WRITE ( io, 336 ) ''
828	ELSE
829	WRITE ( io, 336 ) '(time-averaged)'
830	ENDIF
831
832	output_format = ''
833	IF ( netcdf_output ) THEN
834	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
835	output_format = 'netcdf (64 bit offset)'
836	ELSE
837	output_format = 'netcdf'
838	ENDIF
839	ENDIF
840	IF ( avs_output ) THEN
841	IF ( netcdf_output ) THEN
842	output_format = TRIM( output_format ) // ' and avs'
843	ELSE
844	output_format = 'avs'
845	ENDIF
846	ENDIF
847	WRITE ( io, 345 ) output_format
848
849	IF ( do3d_at_begin ) THEN
850	begin_chr = 'and at the start'
851	ELSE
852	begin_chr = ''
853	ENDIF
854	IF ( av == 0 ) THEN
855	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
856	zu(nz_do3d), nz_do3d
857	ELSE
858	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
859	TRIM( begin_chr ), averaging_interval, &
860	dt_averaging_input, zu(nz_do3d), nz_do3d
861	ENDIF
862
863	IF ( do3d_compress ) THEN
864	do3d_chr = ''
865	i = 1
866	DO WHILE ( do3d(av,i) /= ' ' )
867
868	SELECT CASE ( do3d(av,i) )
869	CASE ( 'u' )
870	j = 1
871	CASE ( 'v' )
872	j = 2
873	CASE ( 'w' )
874	j = 3
875	CASE ( 'p' )
876	j = 4
877	CASE ( 'pt' )
878	j = 5
879	END SELECT
880	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
881	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
882	':' // prec // ','
883	i = i + 1
884
885	ENDDO
886	WRITE ( io, 338 ) do3d_chr
887
888	ENDIF
889
890	IF ( av == 0 ) THEN
891	IF ( skip_time_do3d /= 0.0 ) THEN
892	WRITE ( io, 339 ) skip_time_do3d
893	ENDIF
894	ELSE
895	IF ( skip_time_data_output_av /= 0.0 ) THEN
896	WRITE ( io, 339 ) skip_time_data_output_av
897	ENDIF
898	ENDIF
899
900	ENDIF
901
902	ENDDO
903
904	!
905	!-- Timeseries
906	IF ( dt_dots /= 9999999.9 ) THEN
907	WRITE ( io, 340 )
908
909	output_format = ''
910	IF ( netcdf_output ) THEN
911	IF ( netcdf_64bit ) THEN
912	output_format = 'netcdf (64 bit offset)'
913	ELSE
914	output_format = 'netcdf'
915	ENDIF
916	ENDIF
917	IF ( profil_output ) THEN
918	IF ( netcdf_output ) THEN
919	output_format = TRIM( output_format ) // ' and profil'
920	ELSE
921	output_format = 'profil'
922	ENDIF
923	ENDIF
924	WRITE ( io, 345 ) output_format
925	WRITE ( io, 341 ) dt_dots
926	ENDIF
927
928	#if defined( __dvrp_graphics )
929	!
930	!-- Dvrp-output
931	IF ( dt_dvrp /= 9999999.9 ) THEN
932	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
933	TRIM( dvrp_username ), TRIM( dvrp_directory )
934	i = 1
935	l = 0
936	DO WHILE ( mode_dvrp(i) /= ' ' )
937	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
938	READ ( mode_dvrp(i), '(10X,I2)' ) j
939	l = l + 1
940	IF ( do3d(0,j) /= ' ' ) THEN
941	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
942	ENDIF
943	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
944	READ ( mode_dvrp(i), '(6X,I2)' ) j
945	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
946	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
947	WRITE ( io, 363 )
948	ENDIF
949	i = i + 1
950	ENDDO
951	ENDIF
952	#endif
953
954	#if defined( __spectra )
955	!
956	!-- Spectra output
957	IF ( dt_dosp /= 9999999.9 ) THEN
958	WRITE ( io, 370 )
959
960	output_format = ''
961	IF ( netcdf_output ) THEN
962	IF ( netcdf_64bit ) THEN
963	output_format = 'netcdf (64 bit offset)'
964	ELSE
965	output_format = 'netcdf'
966	ENDIF
967	ENDIF
968	IF ( profil_output ) THEN
969	IF ( netcdf_output ) THEN
970	output_format = TRIM( output_format ) // ' and profil'
971	ELSE
972	output_format = 'profil'
973	ENDIF
974	ENDIF
975	WRITE ( io, 345 ) output_format
976	WRITE ( io, 371 ) dt_dosp
977	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
978	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
979	( spectra_direction(i), i = 1,10 ), &
980	( comp_spectra_level(i), i = 1,100 ), &
981	( plot_spectra_level(i), i = 1,100 ), &
982	averaging_interval_sp, dt_averaging_input_pr
983	ENDIF
984	#endif
985
986	WRITE ( io, 99 )
987
988	!
989	!-- Physical quantities
990	WRITE ( io, 400 )
991
992	!
993	!-- Geostrophic parameters
994	WRITE ( io, 410 ) omega, phi, f, fs
995
996	!
997	!-- Other quantities
998	WRITE ( io, 411 ) g
999	IF ( use_reference ) THEN
1000	IF ( ocean ) THEN
1001	WRITE ( io, 412 ) prho_reference
1002	ELSE
1003	WRITE ( io, 413 ) pt_reference
1004	ENDIF
1005	ENDIF
1006
1007	!
1008	!-- Cloud physics parameters
1009	IF ( cloud_physics ) THEN
1010	WRITE ( io, 415 )
1011	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1012	ENDIF
1013
1014	!-- Profile of the geostrophic wind (component ug)
1015	!-- Building output strings
1016	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1017	gradients = '------'
1018	slices = ' 0'
1019	coordinates = ' 0.0'
1020	i = 1
1021	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1022
1023	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1024	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1025
1026	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1027	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1028
1029	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1030	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1031
1032	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1033	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1034
1035	i = i + 1
1036	ENDDO
1037
1038	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1039	TRIM( gradients ), TRIM( slices )
1040
1041	!-- Profile of the geostrophic wind (component vg)
1042	!-- Building output strings
1043	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1044	gradients = '------'
1045	slices = ' 0'
1046	coordinates = ' 0.0'
1047	i = 1
1048	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1049
1050	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1051	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1052
1053	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1054	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1055
1056	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1057	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1058
1059	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1060	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1061
1062	i = i + 1
1063	ENDDO
1064
1065	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1066	TRIM( gradients ), TRIM( slices )
1067
1068	!
1069	!-- Initial temperature profile
1070	!-- Building output strings, starting with surface temperature
1071	WRITE ( temperatures, '(F6.2)' ) pt_surface
1072	gradients = '------'
1073	slices = ' 0'
1074	coordinates = ' 0.0'
1075	i = 1
1076	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1077
1078	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1079	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1080
1081	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1082	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1083
1084	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1085	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1086
1087	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1088	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1089
1090	i = i + 1
1091	ENDDO
1092
1093	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1094	TRIM( gradients ), TRIM( slices )
1095
1096	!
1097	!-- Initial humidity profile
1098	!-- Building output strings, starting with surface humidity
1099	IF ( humidity .OR. passive_scalar ) THEN
1100	WRITE ( temperatures, '(E8.1)' ) q_surface
1101	gradients = '--------'
1102	slices = ' 0'
1103	coordinates = ' 0.0'
1104	i = 1
1105	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1106
1107	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1108	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1109
1110	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1111	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1112
1113	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1114	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1115
1116	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1117	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1118
1119	i = i + 1
1120	ENDDO
1121
1122	IF ( humidity ) THEN
1123	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1124	TRIM( gradients ), TRIM( slices )
1125	ELSE
1126	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1127	TRIM( gradients ), TRIM( slices )
1128	ENDIF
1129	ENDIF
1130
1131	!
1132	!-- Initial salinity profile
1133	!-- Building output strings, starting with surface salinity
1134	IF ( ocean ) THEN
1135	WRITE ( temperatures, '(F6.2)' ) sa_surface
1136	gradients = '------'
1137	slices = ' 0'
1138	coordinates = ' 0.0'
1139	i = 1
1140	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1141
1142	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1143	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1144
1145	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1146	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1147
1148	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1149	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1150
1151	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1152	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1153
1154	i = i + 1
1155	ENDDO
1156
1157	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1158	TRIM( gradients ), TRIM( slices )
1159	ENDIF
1160
1161	!
1162	!-- LES / turbulence parameters
1163	WRITE ( io, 450 )
1164
1165	!--
1166	! ... LES-constants used must still be added here
1167	!--
1168	IF ( constant_diffusion ) THEN
1169	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1170	prandtl_number
1171	ENDIF
1172	IF ( .NOT. constant_diffusion) THEN
1173	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1174	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1175	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1176	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1177	ENDIF
1178
1179	!
1180	!-- Special actions during the run
1181	WRITE ( io, 470 )
1182	IF ( create_disturbances ) THEN
1183	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1184	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1185	zu(disturbance_level_ind_t), disturbance_level_ind_t
1186	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1187	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1188	ELSE
1189	WRITE ( io, 473 ) disturbance_energy_limit
1190	ENDIF
1191	WRITE ( io, 474 ) TRIM( random_generator )
1192	ENDIF
1193	IF ( pt_surface_initial_change /= 0.0 ) THEN
1194	WRITE ( io, 475 ) pt_surface_initial_change
1195	ENDIF
1196	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1197	WRITE ( io, 476 ) q_surface_initial_change
1198	ENDIF
1199	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1200	WRITE ( io, 477 ) q_surface_initial_change
1201	ENDIF
1202
1203	IF ( particle_advection ) THEN
1204	!
1205	!-- Particle attributes
1206	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1207	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1208	end_time_prel, dt_sort_particles
1209	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1210	IF ( random_start_position ) WRITE ( io, 481 )
1211	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1212	WRITE ( io, 495 ) total_number_of_particles
1213	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1214	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1215	WRITE ( io, 483 ) maximum_number_of_tailpoints
1216	IF ( minimum_tailpoint_distance /= 0 ) THEN
1217	WRITE ( io, 484 ) total_number_of_tails, &
1218	minimum_tailpoint_distance, &
1219	maximum_tailpoint_age
1220	ENDIF
1221	ENDIF
1222	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1223	WRITE ( io, 485 ) dt_write_particle_data
1224	output_format = ''
1225	IF ( netcdf_output ) THEN
1226	IF ( netcdf_64bit ) THEN
1227	output_format = 'netcdf (64 bit offset) and binary'
1228	ELSE
1229	output_format = 'netcdf and binary'
1230	ENDIF
1231	ELSE
1232	output_format = 'binary'
1233	ENDIF
1234	WRITE ( io, 345 ) output_format
1235	ENDIF
1236	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1237	IF ( write_particle_statistics ) WRITE ( io, 486 )
1238
1239	WRITE ( io, 487 ) number_of_particle_groups
1240
1241	DO i = 1, number_of_particle_groups
1242	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1243	WRITE ( io, 490 ) i, 0.0
1244	WRITE ( io, 492 )
1245	ELSE
1246	WRITE ( io, 490 ) i, radius(i)
1247	IF ( density_ratio(i) /= 0.0 ) THEN
1248	WRITE ( io, 491 ) density_ratio(i)
1249	ELSE
1250	WRITE ( io, 492 )
1251	ENDIF
1252	ENDIF
1253	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1254	pdx(i), pdy(i), pdz(i)
1255	ENDDO
1256
1257	ENDIF
1258
1259
1260	!
1261	!-- Parameters of 1D-model
1262	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1263	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1264	mixing_length_1d, dissipation_1d
1265	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1266	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1267	ENDIF
1268	ENDIF
1269
1270	!
1271	!-- User-defined informations
1272	CALL user_header( io )
1273
1274	WRITE ( io, 99 )
1275
1276	!
1277	!-- Write buffer contents to disc immediately
1278	CALL local_flush( io )
1279
1280	!
1281	!-- Here the FORMATs start
1282
1283	99 FORMAT (1X,78('-'))
1284	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1285	1X,'* ',A,' *',9X,A/ &
1286	1X,'***************************',9X,42('-'))
1287	101 FORMAT (37X,'coupled run: ',A/ &
1288	37X,42('-'))
1289	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1290	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1291	' Run on host: ',A10)
1292	#if defined( __parallel )
1293	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1294	')',1X,A)
1295	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1296	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1297	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1298	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1299	37X,'because the job is running on an SMP-cluster')
1300	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1301	#endif
1302	110 FORMAT (/' Numerical Schemes:'/ &
1303	' -----------------'/)
1304	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1305	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1306	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1307	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1308	' or Upstream')
1309	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1310	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1311	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1312	' or Upstream')
1313	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1314	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1315	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1316	' Translation velocity = ',A/ &
1317	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1318	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1319	' of timestep changes)')
1320	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1321	' timestep changes')
1322	122 FORMAT (' --> Time differencing scheme: ',A)
1323	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1324	' maximum damping coefficient: ',F5.3, ' 1/s')
1325	124 FORMAT (' Spline-overshoots are being suppressed')
1326	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1327	' of'/ &
1328	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1329	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1330	' of'/ &
1331	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1332	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1333	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1334	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1335	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1336	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1337	130 FORMAT (' --> Additional prognostic equation for the total water content')
1338	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1339	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1340	' effective emissivity scheme')
1341	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1342	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1343	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1344	A,'-cycle)'/ &
1345	' number of grid levels: ',I2/ &
1346	' Gauss-Seidel red/black iterations: ',I2)
1347	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1348	I3,')')
1349	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1350	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1351	I3,')'/ &
1352	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1353	I3,')')
1354	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1355	139 FORMAT (' --> Loop optimization method: ',A)
1356	140 FORMAT (' maximum residual allowed: ',E10.3)
1357	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1358	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1359	'step')
1360	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1361	'kinetic energy')
1362	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1363	'conserved')
1364	200 FORMAT (//' Run time and time step information:'/ &
1365	' ----------------------------------'/)
1366	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1367	' CFL-factor: ',F4.2)
1368	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1369	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1370	' End time: ',F9.3,' s')
1371	204 FORMAT ( A,F9.3,' s')
1372	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1373	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1374	' CPU-time used: ',F9.3,' s per timestep: ', &
1375	' ',F9.3,' s'/ &
1376	' per second of simulated tim', &
1377	'e: ',F9.3,' s')
1378	250 FORMAT (//' Computational grid and domain size:'/ &
1379	' ----------------------------------'// &
1380	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1381	' m dz = ',F7.3,' m'/ &
1382	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1383	' m z(u) = ',F10.3,' m'/)
1384	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1385	' factor: ',F5.3/ &
1386	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1387	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1388	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1389	255 FORMAT (' Subdomains have equal size')
1390	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1391	'have smaller sizes'/ &
1392	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1393	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1394	' degrees')
1395	270 FORMAT (//' Topography informations:'/ &
1396	' -----------------------'// &
1397	1X,'Topography: ',A)
1398	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1399	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1400	' / ',I4)
1401	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1402	' ------------------------------'// &
1403	' Canopy mode: ', A / &
1404	' Canopy top: ',I4 / &
1405	' Leaf drag coefficient: ',F6.2 /)
1406	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1407	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1408	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1409	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1410	' Height: ',A,' m'/ &
1411	' Leaf area density: ',A,' m2/m3'/ &
1412	' Gradient: ',A,' m2/m4'/ &
1413	' Gridpoint: ',A)
1414
1415	300 FORMAT (//' Boundary conditions:'/ &
1416	' -------------------'// &
1417	' p uv ', &
1418	' pt'// &
1419	' B. bound.: ',A/ &
1420	' T. bound.: ',A)
1421	301 FORMAT (/' ',A// &
1422	' B. bound.: ',A/ &
1423	' T. bound.: ',A)
1424	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1425	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1426	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1427	'computational u,v-level:'// &
1428	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1429	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1430	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1431	307 FORMAT (' Heatflux has a random normal distribution')
1432	308 FORMAT (' Predefined surface temperature')
1433	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1434	310 FORMAT (//' 1D-Model:'// &
1435	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1436	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1437	312 FORMAT (' Predefined surface humidity')
1438	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1439	314 FORMAT (' Predefined scalar value at the surface')
1440	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1441	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1442	'atmosphere model')
1443	317 FORMAT (//' Lateral boundaries:'/ &
1444	' left/right: ',A/ &
1445	' north/south: ',A)
1446	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1447	'max =',F5.1,' m**2/s')
1448	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1449	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1450	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1451	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1452	' v: ',F9.6,' m2/s2')
1453	325 FORMAT (//' List output:'/ &
1454	' -----------'// &
1455	' 1D-Profiles:'/ &
1456	' Output every ',F8.2,' s')
1457	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1458	' Averaging input every ',F8.2,' s')
1459	330 FORMAT (//' Data output:'/ &
1460	' -----------'/)
1461	331 FORMAT (/' 1D-Profiles:')
1462	332 FORMAT (/' ',A)
1463	333 FORMAT (' Output every ',F8.2,' s',/ &
1464	' Time averaged over ',F8.2,' s'/ &
1465	' Averaging input every ',F8.2,' s')
1466	334 FORMAT (/' 2D-Arrays',A,':')
1467	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1468	' Output every ',F8.2,' s ',A/ &
1469	' Cross sections at ',A1,' = ',A/ &
1470	' scalar-coordinates: ',A,' m'/)
1471	336 FORMAT (/' 3D-Arrays',A,':')
1472	337 FORMAT (/' Arrays: ',A/ &
1473	' Output every ',F8.2,' s ',A/ &
1474	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1475	338 FORMAT (' Compressed data output'/ &
1476	' Decimal precision: ',A/)
1477	339 FORMAT (' No output during initial ',F8.2,' s')
1478	340 FORMAT (/' Time series:')
1479	341 FORMAT (' Output every ',F8.2,' s'/)
1480	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1481	' Output every ',F8.2,' s ',A/ &
1482	' Time averaged over ',F8.2,' s'/ &
1483	' Averaging input every ',F8.2,' s'/ &
1484	' Cross sections at ',A1,' = ',A/ &
1485	' scalar-coordinates: ',A,' m'/)
1486	343 FORMAT (/' Arrays: ',A/ &
1487	' Output every ',F8.2,' s ',A/ &
1488	' Time averaged over ',F8.2,' s'/ &
1489	' Averaging input every ',F8.2,' s'/ &
1490	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1491	345 FORMAT (' Output format: ',A/)
1492	#if defined( __dvrp_graphics )
1493	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1494	' Output every ',F7.1,' s'/ &
1495	' Output mode: ',A/ &
1496	' Host / User: ',A,' / ',A/ &
1497	' Directory: ',A// &
1498	' The sequence contains:')
1499	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1500	362 FORMAT (' Sectional plane ',A)
1501	363 FORMAT (' Particles')
1502	#endif
1503	#if defined( __spectra )
1504	370 FORMAT (' Spectra:')
1505	371 FORMAT (' Output every ',F7.1,' s'/)
1506	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1507	' Directions: ', 10(A5,',')/ &
1508	' height levels k = ', 20(I3,',')/ &
1509	' ', 20(I3,',')/ &
1510	' ', 20(I3,',')/ &
1511	' ', 20(I3,',')/ &
1512	' ', 19(I3,','),I3,'.'/ &
1513	' height levels selected for standard plot:'/ &
1514	' k = ', 20(I3,',')/ &
1515	' ', 20(I3,',')/ &
1516	' ', 20(I3,',')/ &
1517	' ', 20(I3,',')/ &
1518	' ', 19(I3,','),I3,'.'/ &
1519	' Time averaged over ', F7.1, ' s,' / &
1520	' Profiles for the time averaging are taken every ', &
1521	F6.1,' s')
1522	#endif
1523	400 FORMAT (//' Physical quantities:'/ &
1524	' -------------------'/)
1525	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1526	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1527	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1528	' f* = ',F9.6,' 1/s')
1529	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1530	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1531	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1532	415 FORMAT (/' Cloud physics parameters:'/ &
1533	' ------------------------'/)
1534	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1535	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1536	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1537	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1538	' Vapourization heat : L_v = ',E8.2,' J/kg')
1539	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1540	' Height: ',A,' m'/ &
1541	' Temperature: ',A,' K'/ &
1542	' Gradient: ',A,' K/100m'/ &
1543	' Gridpoint: ',A)
1544	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1545	' Height: ',A,' m'/ &
1546	' Humidity: ',A,' kg/kg'/ &
1547	' Gradient: ',A,' (kg/kg)/100m'/ &
1548	' Gridpoint: ',A)
1549	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1550	' Height: ',A,' m'/ &
1551	' Scalar concentration: ',A,' kg/m**3'/ &
1552	' Gradient: ',A,' (kg/m**3)/100m'/ &
1553	' Gridpoint: ',A)
1554	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1555	' Height: ',A,' m'/ &
1556	' ug: ',A,' m/s'/ &
1557	' Gradient: ',A,' 1/100s'/ &
1558	' Gridpoint: ',A)
1559	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1560	' Height: ',A,' m'/ &
1561	' vg: ',A,' m/s'/ &
1562	' Gradient: ',A,' 1/100s'/ &
1563	' Gridpoint: ',A)
1564	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1565	' Height: ',A,' m'/ &
1566	' Salinity: ',A,' psu'/ &
1567	' Gradient: ',A,' psu/100m'/ &
1568	' Gridpoint: ',A)
1569	450 FORMAT (//' LES / Turbulence quantities:'/ &
1570	' ---------------------------'/)
1571	451 FORMAT (' Diffusion coefficients are constant:'/ &
1572	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1573	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1574	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1575	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1576	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1577	470 FORMAT (//' Actions during the simulation:'/ &
1578	' -----------------------------'/)
1579	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1580	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1581	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1582	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1583	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1584	' to i/j =',I4)
1585	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1586	1X,F5.3, ' m2/s2')
1587	474 FORMAT (' Random number generator used : ',A/)
1588	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1589	'respectively, if'/ &
1590	' the value is negative) by ',F5.2,' K at the beginning of the',&
1591	' 3D-simulation'/)
1592	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1593	'respectively, if the'/ &
1594	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1595	' the 3D-simulation'/)
1596	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1597	'respectively, if the'/ &
1598	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1599	' the 3D-simulation'/)
1600	480 FORMAT (' Particles:'/ &
1601	' ---------'// &
1602	' Particle advection is active (switched on at t = ', F7.1, &
1603	' s)'/ &
1604	' Start of new particle generations every ',F6.1,' s'/ &
1605	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1606	' bottom: ', A, ' top: ', A/&
1607	' Maximum particle age: ',F9.1,' s'/ &
1608	' Advection stopped at t = ',F9.1,' s'/ &
1609	' Particles are sorted every ',F9.1,' s'/)
1610	481 FORMAT (' Particles have random start positions'/)
1611	482 FORMAT (' Particles are advected only horizontally'/)
1612	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1613	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1614	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1615	' Maximum age of the end of the tail: ',F8.2,' s')
1616	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1617	486 FORMAT (' Particle statistics are written on file'/)
1618	487 FORMAT (' Number of particle groups: ',I2/)
1619	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1620	' minimum timestep for advection: ', F7.5/)
1621	489 FORMAT (' Number of particles simultaneously released at each ', &
1622	'point: ', I5/)
1623	490 FORMAT (' Particle group ',I2,':'/ &
1624	' Particle radius: ',E10.3, 'm')
1625	491 FORMAT (' Particle inertia is activated'/ &
1626	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1627	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1628	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1629	' y:',F8.1,' - ',F8.1,' m'/&
1630	' z:',F8.1,' - ',F8.1,' m'/&
1631	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1632	' m dz = ',F8.1,' m'/)
1633	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1634	F8.2,' s'/)
1635	495 FORMAT (' Number of particles in total domain: ',I10/)
1636	500 FORMAT (//' 1D-Model parameters:'/ &
1637	' -------------------'// &
1638	' Simulation time: ',F8.1,' s'/ &
1639	' Run-controll output every: ',F8.1,' s'/ &
1640	' Vertical profile output every: ',F8.1,' s'/ &
1641	' Mixing length calculation: ',A/ &
1642	' Dissipation calculation: ',A/)
1643	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1644
1645
1646	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |