Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 193

Last change on this file since 193 was 189, checked in by letzel, 16 years ago
changed: allow 100 spectra levels instead of 10 for consistency with define_netcdf_header
Property svn:keywords set to `Id`
File size: 62.7 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! allow 100 spectra levels instead of 10 for consistency with
7	! define_netcdf_header
8	! Bugfix in the output of the characteristic levels of potential temperature,
9	! geostrophic wind, scalar concentration, humidity and leaf area density
10	! Output of turbulence recycling informations
11	!
12	! Former revisions:
13	! -----------------
14	! $Id: header.f90 189 2008-08-13 17:09:26Z raasch $
15	!
16	! 138 2007-11-28 10:03:58Z letzel
17	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
18	! Allow two instead of one digit to specify isosurface and slicer variables.
19	! Output of sorting frequency of particles
20	!
21	! 108 2007-08-24 15:10:38Z letzel
22	! Output of informations for coupled model runs (boundary conditions etc.)
23	! + output of momentumfluxes at the top boundary
24	! Rayleigh damping for ocean, e_init
25	!
26	! 97 2007-06-21 08:23:15Z raasch
27	! Adjustments for the ocean version.
28	! use_pt_reference renamed use_reference
29	!
30	! 87 2007-05-22 15:46:47Z raasch
31	! Bugfix: output of use_upstream_for_tke
32	!
33	! 82 2007-04-16 15:40:52Z raasch
34	! Preprocessor strings for different linux clusters changed to "lc",
35	! routine local_flush is used for buffer flushing
36	!
37	! 76 2007-03-29 00:58:32Z raasch
38	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
39	! output of the loop optimization method, moisture renamed humidity,
40	! output of subversion revision number
41	!
42	! 19 2007-02-23 04:53:48Z raasch
43	! Output of scalar flux applied at top boundary
44	!
45	! RCS Log replace by Id keyword, revision history cleaned up
46	!
47	! Revision 1.63 2006/08/22 13:53:13 raasch
48	! Output of dz_max
49	!
50	! Revision 1.1 1997/08/11 06:17:20 raasch
51	! Initial revision
52	!
53	!
54	! Description:
55	! ------------
56	! Writing a header with all important informations about the actual run.
57	! This subroutine is called three times, two times at the beginning
58	! (writing information on files RUN_CONTROL and HEADER) and one time at the
59	! end of the run, then writing additional information about CPU-usage on file
60	! header.
61	!------------------------------------------------------------------------------!
62
63	USE arrays_3d
64	USE control_parameters
65	USE cloud_parameters
66	USE cpulog
67	USE dvrp_variables
68	USE grid_variables
69	USE indices
70	USE model_1d
71	USE particle_attributes
72	USE pegrid
73	USE spectrum
74
75	IMPLICIT NONE
76
77	CHARACTER (LEN=1) :: prec
78	CHARACTER (LEN=2) :: do2d_mode
79	CHARACTER (LEN=5) :: section_chr
80	CHARACTER (LEN=9) :: time_to_string
81	CHARACTER (LEN=10) :: coor_chr, host_chr
82	CHARACTER (LEN=16) :: begin_chr
83	CHARACTER (LEN=21) :: ver_rev
84	CHARACTER (LEN=40) :: output_format
85	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
86	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
87	run_classification
88	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
89	temperatures, ugcomponent, vgcomponent
90	CHARACTER (LEN=85) :: roben, runten
91
92	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
93	REAL :: cpuseconds_per_simulated_second
94
95	!
96	!-- Open the output file. At the end of the simulation, output is directed
97	!-- to unit 19.
98	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
99	.NOT. simulated_time_at_begin /= simulated_time ) THEN
100	io = 15 ! header output on file RUN_CONTROL
101	ELSE
102	io = 19 ! header output on file HEADER
103	ENDIF
104	CALL check_open( io )
105
106	!
107	!-- At the end of the run, output file (HEADER) will be rewritten with
108	!-- new informations
109	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
110
111	!
112	!-- Determine kind of model run
113	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
114	run_classification = '3D - restart run'
115	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
116	run_classification = '3D - run using 3D - prerun data'
117	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
118	run_classification = '3D - run without 1D - prerun'
119	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
120	run_classification = '3D - run with 1D - prerun'
121	ELSE
122	PRINT*,'+++ header: unknown action(s): ',initializing_actions
123	ENDIF
124	IF ( ocean ) THEN
125	run_classification = 'ocean - ' // run_classification
126	ELSE
127	run_classification = 'atmosphere - ' // run_classification
128	ENDIF
129
130	!
131	!-- Run-identification, date, time, host
132	host_chr = host(1:10)
133	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
134	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
135	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
136	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
137	ADJUSTR( host_chr )
138	#if defined( __parallel )
139	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
140	char1 = 'calculated'
141	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
142	host(1:2) == 'lc' ) .AND. &
143	npex == -1 .AND. pdims(2) == 1 ) THEN
144	char1 = 'forced'
145	ELSE
146	char1 = 'predefined'
147	ENDIF
148	IF ( threads_per_task == 1 ) THEN
149	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
150	ELSE
151	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
152	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
153	ENDIF
154	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
155	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
156	npex == -1 .AND. pdims(2) == 1 ) &
157	THEN
158	WRITE ( io, 106 )
159	ELSEIF ( pdims(2) == 1 ) THEN
160	WRITE ( io, 107 ) 'x'
161	ELSEIF ( pdims(1) == 1 ) THEN
162	WRITE ( io, 107 ) 'y'
163	ENDIF
164	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
165	#endif
166	WRITE ( io, 99 )
167
168	!
169	!-- Numerical schemes
170	WRITE ( io, 110 )
171	IF ( psolver(1:7) == 'poisfft' ) THEN
172	WRITE ( io, 111 ) TRIM( fft_method )
173	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
174	ELSEIF ( psolver == 'sor' ) THEN
175	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
176	ELSEIF ( psolver == 'multigrid' ) THEN
177	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
178	IF ( mg_cycles == -1 ) THEN
179	WRITE ( io, 140 ) residual_limit
180	ELSE
181	WRITE ( io, 141 ) mg_cycles
182	ENDIF
183	IF ( mg_switch_to_pe0_level == 0 ) THEN
184	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
185	nzt_mg(1)
186	ELSE
187	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
188	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
189	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
190	nzt_mg(mg_switch_to_pe0_level), &
191	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
192	nzt_mg(1)
193	ENDIF
194	ENDIF
195	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
196	THEN
197	WRITE ( io, 142 )
198	ENDIF
199
200	IF ( momentum_advec == 'pw-scheme' ) THEN
201	WRITE ( io, 113 )
202	ELSE
203	WRITE ( io, 114 )
204	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
205	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
206	overshoot_limit_w /= 0.0 ) THEN
207	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
208	overshoot_limit_w
209	ENDIF
210	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
211	ups_limit_w /= 0.0 ) &
212	THEN
213	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
214	ENDIF
215	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
216	ENDIF
217	IF ( scalar_advec == 'pw-scheme' ) THEN
218	WRITE ( io, 116 )
219	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
220	WRITE ( io, 117 )
221	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
222	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
223	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
224	ENDIF
225	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
226	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
227	ENDIF
228	ELSE
229	WRITE ( io, 118 )
230	ENDIF
231
232	WRITE ( io, 139 ) TRIM( loop_optimization )
233
234	IF ( galilei_transformation ) THEN
235	IF ( use_ug_for_galilei_tr ) THEN
236	char1 = 'geostrophic wind'
237	ELSE
238	char1 = 'mean wind in model domain'
239	ENDIF
240	IF ( simulated_time_at_begin == simulated_time ) THEN
241	char2 = 'at the start of the run'
242	ELSE
243	char2 = 'at the end of the run'
244	ENDIF
245	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
246	advected_distance_x/1000.0, advected_distance_y/1000.0
247	ENDIF
248	IF ( timestep_scheme == 'leapfrog' ) THEN
249	WRITE ( io, 120 )
250	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
251	WRITE ( io, 121 )
252	ELSE
253	WRITE ( io, 122 ) timestep_scheme
254	ENDIF
255	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
256	IF ( rayleigh_damping_factor /= 0.0 ) THEN
257	IF ( .NOT. ocean ) THEN
258	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
259	rayleigh_damping_factor
260	ELSE
261	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
262	rayleigh_damping_factor
263	ENDIF
264	ENDIF
265	IF ( humidity ) THEN
266	IF ( .NOT. cloud_physics ) THEN
267	WRITE ( io, 129 )
268	ELSE
269	WRITE ( io, 130 )
270	WRITE ( io, 131 )
271	IF ( radiation ) WRITE ( io, 132 )
272	IF ( precipitation ) WRITE ( io, 133 )
273	ENDIF
274	ENDIF
275	IF ( passive_scalar ) WRITE ( io, 134 )
276	IF ( conserve_volume_flow ) WRITE ( io, 150 )
277	WRITE ( io, 99 )
278
279	!
280	!-- Runtime and timestep informations
281	WRITE ( io, 200 )
282	IF ( .NOT. dt_fixed ) THEN
283	WRITE ( io, 201 ) dt_max, cfl_factor
284	ELSE
285	WRITE ( io, 202 ) dt
286	ENDIF
287	WRITE ( io, 203 ) simulated_time_at_begin, end_time
288
289	IF ( time_restart /= 9999999.9 .AND. &
290	simulated_time_at_begin == simulated_time ) THEN
291	IF ( dt_restart == 9999999.9 ) THEN
292	WRITE ( io, 204 ) ' Restart at: ',time_restart
293	ELSE
294	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
295	ENDIF
296	ENDIF
297
298	IF ( simulated_time_at_begin /= simulated_time ) THEN
299	i = MAX ( log_point_s(10)%counts, 1 )
300	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
301	cpuseconds_per_simulated_second = 0.0
302	ELSE
303	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
304	( simulated_time - &
305	simulated_time_at_begin )
306	ENDIF
307	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
308	log_point_s(10)%sum / REAL( i ), &
309	cpuseconds_per_simulated_second
310	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
311	IF ( dt_restart == 9999999.9 ) THEN
312	WRITE ( io, 204 ) ' Next restart at: ',time_restart
313	ELSE
314	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
315	ENDIF
316	ENDIF
317	ENDIF
318
319	!
320	!-- Computational grid
321	IF ( .NOT. ocean ) THEN
322	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
323	IF ( dz_stretch_level_index < nzt+1 ) THEN
324	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
325	dz_stretch_factor, dz_max
326	ENDIF
327	ELSE
328	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
329	IF ( dz_stretch_level_index > 0 ) THEN
330	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
331	dz_stretch_factor, dz_max
332	ENDIF
333	ENDIF
334	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
335	MIN( nnz+2, nzt+2 )
336	IF ( numprocs > 1 ) THEN
337	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
338	WRITE ( io, 255 )
339	ELSE
340	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
341	ENDIF
342	ENDIF
343	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
344
345	!
346	!-- Topography
347	WRITE ( io, 270 ) topography
348	SELECT CASE ( TRIM( topography ) )
349
350	CASE ( 'flat' )
351	! no actions necessary
352
353	CASE ( 'single_building' )
354	blx = INT( building_length_x / dx )
355	bly = INT( building_length_y / dy )
356	bh = INT( building_height / dz )
357
358	IF ( building_wall_left == 9999999.9 ) THEN
359	building_wall_left = ( nx + 1 - blx ) / 2 * dx
360	ENDIF
361	bxl = INT ( building_wall_left / dx + 0.5 )
362	bxr = bxl + blx
363
364	IF ( building_wall_south == 9999999.9 ) THEN
365	building_wall_south = ( ny + 1 - bly ) / 2 * dy
366	ENDIF
367	bys = INT ( building_wall_south / dy + 0.5 )
368	byn = bys + bly
369
370	WRITE ( io, 271 ) building_length_x, building_length_y, &
371	building_height, bxl, bxr, bys, byn
372
373	END SELECT
374
375	IF ( plant_canopy ) THEN
376
377	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
378	IF ( passive_scalar ) THEN
379	WRITE ( io, 281 ) scalar_exchange_coefficient, &
380	leaf_surface_concentration
381	ENDIF
382
383	!
384	!-- Heat flux at the top of vegetation
385	WRITE ( io, 282 ) cthf
386
387	!
388	!-- Leaf area density profile
389	!-- Building output strings, starting with surface value
390	WRITE ( learde, '(F6.2)' ) lad_surface
391	gradients = '------'
392	slices = ' 0'
393	coordinates = ' 0.0'
394	i = 1
395	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
396
397	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
398	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
399
400	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
401	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
402
403	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
404	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
405
406	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
407	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
408
409	i = i + 1
410	ENDDO
411
412	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
413	TRIM( gradients ), TRIM( slices )
414
415	ENDIF
416
417	!
418	!-- Boundary conditions
419	IF ( ibc_p_b == 0 ) THEN
420	runten = 'p(0) = 0 \|'
421	ELSEIF ( ibc_p_b == 1 ) THEN
422	runten = 'p(0) = p(1) \|'
423	ELSE
424	runten = 'p(0) = p(1) +R\|'
425	ENDIF
426	IF ( ibc_p_t == 0 ) THEN
427	roben = 'p(nzt+1) = 0 \|'
428	ELSE
429	roben = 'p(nzt+1) = p(nzt) \|'
430	ENDIF
431
432	IF ( ibc_uv_b == 0 ) THEN
433	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
434	ELSE
435	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
436	ENDIF
437	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
438	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
439	ELSEIF ( ibc_uv_t == 0 ) THEN
440	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
441	ELSE
442	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
443	ENDIF
444
445	IF ( ibc_pt_b == 0 ) THEN
446	runten = TRIM( runten ) // ' pt(0) = pt_surface'
447	ELSEIF ( ibc_pt_b == 1 ) THEN
448	runten = TRIM( runten ) // ' pt(0) = pt(1)'
449	ELSEIF ( ibc_pt_b == 2 ) THEN
450	runten = TRIM( runten ) // ' pt(0) = from coupled model'
451	ENDIF
452	IF ( ibc_pt_t == 0 ) THEN
453	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
454	ELSEIF( ibc_pt_t == 1 ) THEN
455	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
456	ELSEIF( ibc_pt_t == 2 ) THEN
457	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
458	ENDIF
459
460	WRITE ( io, 300 ) runten, roben
461
462	IF ( .NOT. constant_diffusion ) THEN
463	IF ( ibc_e_b == 1 ) THEN
464	runten = 'e(0) = e(1)'
465	ELSE
466	runten = 'e(0) = e(1) = (u/0.1)*2'
467	ENDIF
468	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
469
470	WRITE ( io, 301 ) 'e', runten, roben
471
472	ENDIF
473
474	IF ( ocean ) THEN
475	runten = 'sa(0) = sa(1)'
476	IF ( ibc_sa_t == 0 ) THEN
477	roben = 'sa(nzt+1) = sa_surface'
478	ELSE
479	roben = 'sa(nzt+1) = sa(nzt)'
480	ENDIF
481	WRITE ( io, 301 ) 'sa', runten, roben
482	ENDIF
483
484	IF ( humidity ) THEN
485	IF ( ibc_q_b == 0 ) THEN
486	runten = 'q(0) = q_surface'
487	ELSE
488	runten = 'q(0) = q(1)'
489	ENDIF
490	IF ( ibc_q_t == 0 ) THEN
491	roben = 'q(nzt) = q_top'
492	ELSE
493	roben = 'q(nzt) = q(nzt-1) + dq/dz'
494	ENDIF
495	WRITE ( io, 301 ) 'q', runten, roben
496	ENDIF
497
498	IF ( passive_scalar ) THEN
499	IF ( ibc_q_b == 0 ) THEN
500	runten = 's(0) = s_surface'
501	ELSE
502	runten = 's(0) = s(1)'
503	ENDIF
504	IF ( ibc_q_t == 0 ) THEN
505	roben = 's(nzt) = s_top'
506	ELSE
507	roben = 's(nzt) = s(nzt-1) + ds/dz'
508	ENDIF
509	WRITE ( io, 301 ) 's', runten, roben
510	ENDIF
511
512	IF ( use_surface_fluxes ) THEN
513	WRITE ( io, 303 )
514	IF ( constant_heatflux ) THEN
515	WRITE ( io, 306 ) surface_heatflux
516	IF ( random_heatflux ) WRITE ( io, 307 )
517	ENDIF
518	IF ( humidity .AND. constant_waterflux ) THEN
519	WRITE ( io, 311 ) surface_waterflux
520	ENDIF
521	IF ( passive_scalar .AND. constant_waterflux ) THEN
522	WRITE ( io, 313 ) surface_waterflux
523	ENDIF
524	ENDIF
525
526	IF ( use_top_fluxes ) THEN
527	WRITE ( io, 304 )
528	IF ( coupling_mode == 'uncoupled' ) THEN
529	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
530	IF ( constant_top_heatflux ) THEN
531	WRITE ( io, 306 ) top_heatflux
532	ENDIF
533	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
534	WRITE ( io, 316 )
535	ENDIF
536	IF ( ocean .AND. constant_top_salinityflux ) THEN
537	WRITE ( io, 309 ) top_salinityflux
538	ENDIF
539	IF ( humidity .OR. passive_scalar ) THEN
540	WRITE ( io, 315 )
541	ENDIF
542	ENDIF
543
544	IF ( prandtl_layer ) THEN
545	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
546	rif_min, rif_max
547	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
548	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
549	WRITE ( io, 312 )
550	ENDIF
551	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
552	WRITE ( io, 314 )
553	ENDIF
554	ELSE
555	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
556	WRITE ( io, 310 ) rif_min, rif_max
557	ENDIF
558	ENDIF
559
560	WRITE ( io, 317 ) bc_lr, bc_ns
561	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
562	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
563	IF ( turbulent_inflow ) THEN
564	WRITE ( io, 319 ) recycling_width, recycling_plane, &
565	inflow_damping_height, inflow_damping_width
566	ENDIF
567	ENDIF
568
569	!
570	!-- Listing of 1D-profiles
571	WRITE ( io, 325 ) dt_dopr_listing
572	IF ( averaging_interval_pr /= 0.0 ) THEN
573	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
574	ENDIF
575
576	!
577	!-- DATA output
578	WRITE ( io, 330 )
579	IF ( averaging_interval_pr /= 0.0 ) THEN
580	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
581	ENDIF
582
583	!
584	!-- 1D-profiles
585	dopr_chr = 'Profile:'
586	IF ( dopr_n /= 0 ) THEN
587	WRITE ( io, 331 )
588
589	output_format = ''
590	IF ( netcdf_output ) THEN
591	IF ( netcdf_64bit ) THEN
592	output_format = 'netcdf (64 bit offset)'
593	ELSE
594	output_format = 'netcdf'
595	ENDIF
596	ENDIF
597	IF ( profil_output ) THEN
598	IF ( netcdf_output ) THEN
599	output_format = TRIM( output_format ) // ' and profil'
600	ELSE
601	output_format = 'profil'
602	ENDIF
603	ENDIF
604	WRITE ( io, 345 ) output_format
605
606	DO i = 1, dopr_n
607	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
608	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
609	WRITE ( io, 332 ) dopr_chr
610	dopr_chr = ' :'
611	ENDIF
612	ENDDO
613
614	IF ( dopr_chr /= '' ) THEN
615	WRITE ( io, 332 ) dopr_chr
616	ENDIF
617	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
618	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
619	ENDIF
620
621	!
622	!-- 2D-arrays
623	DO av = 0, 1
624
625	i = 1
626	do2d_xy = ''
627	do2d_xz = ''
628	do2d_yz = ''
629	DO WHILE ( do2d(av,i) /= ' ' )
630
631	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
632	do2d_mode = do2d(av,i)(l-1:l)
633
634	SELECT CASE ( do2d_mode )
635	CASE ( 'xy' )
636	ll = LEN_TRIM( do2d_xy )
637	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
638	CASE ( 'xz' )
639	ll = LEN_TRIM( do2d_xz )
640	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
641	CASE ( 'yz' )
642	ll = LEN_TRIM( do2d_yz )
643	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
644	END SELECT
645
646	i = i + 1
647
648	ENDDO
649
650	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
651	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
652	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
653	( netcdf_output .OR. iso2d_output ) ) THEN
654
655	IF ( av == 0 ) THEN
656	WRITE ( io, 334 ) ''
657	ELSE
658	WRITE ( io, 334 ) '(time-averaged)'
659	ENDIF
660
661	IF ( do2d_at_begin ) THEN
662	begin_chr = 'and at the start'
663	ELSE
664	begin_chr = ''
665	ENDIF
666
667	output_format = ''
668	IF ( netcdf_output ) THEN
669	IF ( netcdf_64bit ) THEN
670	output_format = 'netcdf (64 bit offset)'
671	ELSE
672	output_format = 'netcdf'
673	ENDIF
674	ENDIF
675	IF ( iso2d_output ) THEN
676	IF ( netcdf_output ) THEN
677	output_format = TRIM( output_format ) // ' and iso2d'
678	ELSE
679	output_format = 'iso2d'
680	ENDIF
681	ENDIF
682	WRITE ( io, 345 ) output_format
683
684	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
685	i = 1
686	slices = '/'
687	coordinates = '/'
688	!
689	!-- Building strings with index and coordinate informations of the
690	!-- slices
691	DO WHILE ( section(i,1) /= -9999 )
692
693	WRITE (section_chr,'(I5)') section(i,1)
694	section_chr = ADJUSTL( section_chr )
695	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
696
697	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
698	coor_chr = ADJUSTL( coor_chr )
699	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
700
701	i = i + 1
702	ENDDO
703	IF ( av == 0 ) THEN
704	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
705	TRIM( begin_chr ), 'k', TRIM( slices ), &
706	TRIM( coordinates )
707	IF ( skip_time_do2d_xy /= 0.0 ) THEN
708	WRITE ( io, 339 ) skip_time_do2d_xy
709	ENDIF
710	ELSE
711	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
712	TRIM( begin_chr ), averaging_interval, &
713	dt_averaging_input, 'k', TRIM( slices ), &
714	TRIM( coordinates )
715	IF ( skip_time_data_output_av /= 0.0 ) THEN
716	WRITE ( io, 339 ) skip_time_data_output_av
717	ENDIF
718	ENDIF
719
720	ENDIF
721
722	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
723	i = 1
724	slices = '/'
725	coordinates = '/'
726	!
727	!-- Building strings with index and coordinate informations of the
728	!-- slices
729	DO WHILE ( section(i,2) /= -9999 )
730
731	WRITE (section_chr,'(I5)') section(i,2)
732	section_chr = ADJUSTL( section_chr )
733	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
734
735	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
736	coor_chr = ADJUSTL( coor_chr )
737	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
738
739	i = i + 1
740	ENDDO
741	IF ( av == 0 ) THEN
742	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
743	TRIM( begin_chr ), 'j', TRIM( slices ), &
744	TRIM( coordinates )
745	IF ( skip_time_do2d_xz /= 0.0 ) THEN
746	WRITE ( io, 339 ) skip_time_do2d_xz
747	ENDIF
748	ELSE
749	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
750	TRIM( begin_chr ), averaging_interval, &
751	dt_averaging_input, 'j', TRIM( slices ), &
752	TRIM( coordinates )
753	IF ( skip_time_data_output_av /= 0.0 ) THEN
754	WRITE ( io, 339 ) skip_time_data_output_av
755	ENDIF
756	ENDIF
757	ENDIF
758
759	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
760	i = 1
761	slices = '/'
762	coordinates = '/'
763	!
764	!-- Building strings with index and coordinate informations of the
765	!-- slices
766	DO WHILE ( section(i,3) /= -9999 )
767
768	WRITE (section_chr,'(I5)') section(i,3)
769	section_chr = ADJUSTL( section_chr )
770	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
771
772	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
773	coor_chr = ADJUSTL( coor_chr )
774	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
775
776	i = i + 1
777	ENDDO
778	IF ( av == 0 ) THEN
779	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
780	TRIM( begin_chr ), 'i', TRIM( slices ), &
781	TRIM( coordinates )
782	IF ( skip_time_do2d_yz /= 0.0 ) THEN
783	WRITE ( io, 339 ) skip_time_do2d_yz
784	ENDIF
785	ELSE
786	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
787	TRIM( begin_chr ), averaging_interval, &
788	dt_averaging_input, 'i', TRIM( slices ), &
789	TRIM( coordinates )
790	IF ( skip_time_data_output_av /= 0.0 ) THEN
791	WRITE ( io, 339 ) skip_time_data_output_av
792	ENDIF
793	ENDIF
794	ENDIF
795
796	ENDIF
797
798	ENDDO
799
800	!
801	!-- 3d-arrays
802	DO av = 0, 1
803
804	i = 1
805	do3d_chr = ''
806	DO WHILE ( do3d(av,i) /= ' ' )
807
808	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
809	i = i + 1
810
811	ENDDO
812
813	IF ( do3d_chr /= '' ) THEN
814	IF ( av == 0 ) THEN
815	WRITE ( io, 336 ) ''
816	ELSE
817	WRITE ( io, 336 ) '(time-averaged)'
818	ENDIF
819
820	output_format = ''
821	IF ( netcdf_output ) THEN
822	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
823	output_format = 'netcdf (64 bit offset)'
824	ELSE
825	output_format = 'netcdf'
826	ENDIF
827	ENDIF
828	IF ( avs_output ) THEN
829	IF ( netcdf_output ) THEN
830	output_format = TRIM( output_format ) // ' and avs'
831	ELSE
832	output_format = 'avs'
833	ENDIF
834	ENDIF
835	WRITE ( io, 345 ) output_format
836
837	IF ( do3d_at_begin ) THEN
838	begin_chr = 'and at the start'
839	ELSE
840	begin_chr = ''
841	ENDIF
842	IF ( av == 0 ) THEN
843	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
844	zu(nz_do3d), nz_do3d
845	ELSE
846	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
847	TRIM( begin_chr ), averaging_interval, &
848	dt_averaging_input, zu(nz_do3d), nz_do3d
849	ENDIF
850
851	IF ( do3d_compress ) THEN
852	do3d_chr = ''
853	i = 1
854	DO WHILE ( do3d(av,i) /= ' ' )
855
856	SELECT CASE ( do3d(av,i) )
857	CASE ( 'u' )
858	j = 1
859	CASE ( 'v' )
860	j = 2
861	CASE ( 'w' )
862	j = 3
863	CASE ( 'p' )
864	j = 4
865	CASE ( 'pt' )
866	j = 5
867	END SELECT
868	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
869	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
870	':' // prec // ','
871	i = i + 1
872
873	ENDDO
874	WRITE ( io, 338 ) do3d_chr
875
876	ENDIF
877
878	IF ( av == 0 ) THEN
879	IF ( skip_time_do3d /= 0.0 ) THEN
880	WRITE ( io, 339 ) skip_time_do3d
881	ENDIF
882	ELSE
883	IF ( skip_time_data_output_av /= 0.0 ) THEN
884	WRITE ( io, 339 ) skip_time_data_output_av
885	ENDIF
886	ENDIF
887
888	ENDIF
889
890	ENDDO
891
892	!
893	!-- Timeseries
894	IF ( dt_dots /= 9999999.9 ) THEN
895	WRITE ( io, 340 )
896
897	output_format = ''
898	IF ( netcdf_output ) THEN
899	IF ( netcdf_64bit ) THEN
900	output_format = 'netcdf (64 bit offset)'
901	ELSE
902	output_format = 'netcdf'
903	ENDIF
904	ENDIF
905	IF ( profil_output ) THEN
906	IF ( netcdf_output ) THEN
907	output_format = TRIM( output_format ) // ' and profil'
908	ELSE
909	output_format = 'profil'
910	ENDIF
911	ENDIF
912	WRITE ( io, 345 ) output_format
913	WRITE ( io, 341 ) dt_dots
914	ENDIF
915
916	#if defined( __dvrp_graphics )
917	!
918	!-- Dvrp-output
919	IF ( dt_dvrp /= 9999999.9 ) THEN
920	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
921	TRIM( dvrp_username ), TRIM( dvrp_directory )
922	i = 1
923	l = 0
924	DO WHILE ( mode_dvrp(i) /= ' ' )
925	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
926	READ ( mode_dvrp(i), '(10X,I2)' ) j
927	l = l + 1
928	IF ( do3d(0,j) /= ' ' ) THEN
929	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
930	ENDIF
931	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
932	READ ( mode_dvrp(i), '(6X,I2)' ) j
933	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
934	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
935	WRITE ( io, 363 )
936	ENDIF
937	i = i + 1
938	ENDDO
939	ENDIF
940	#endif
941
942	#if defined( __spectra )
943	!
944	!-- Spectra output
945	IF ( dt_dosp /= 9999999.9 ) THEN
946	WRITE ( io, 370 )
947
948	output_format = ''
949	IF ( netcdf_output ) THEN
950	IF ( netcdf_64bit ) THEN
951	output_format = 'netcdf (64 bit offset)'
952	ELSE
953	output_format = 'netcdf'
954	ENDIF
955	ENDIF
956	IF ( profil_output ) THEN
957	IF ( netcdf_output ) THEN
958	output_format = TRIM( output_format ) // ' and profil'
959	ELSE
960	output_format = 'profil'
961	ENDIF
962	ENDIF
963	WRITE ( io, 345 ) output_format
964	WRITE ( io, 371 ) dt_dosp
965	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
966	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
967	( spectra_direction(i), i = 1,10 ), &
968	( comp_spectra_level(i), i = 1,100 ), &
969	( plot_spectra_level(i), i = 1,100 ), &
970	averaging_interval_sp, dt_averaging_input_pr
971	ENDIF
972	#endif
973
974	WRITE ( io, 99 )
975
976	!
977	!-- Physical quantities
978	WRITE ( io, 400 )
979
980	!
981	!-- Geostrophic parameters
982	WRITE ( io, 410 ) omega, phi, f, fs
983
984	!
985	!-- Other quantities
986	WRITE ( io, 411 ) g
987	IF ( use_reference ) THEN
988	IF ( ocean ) THEN
989	WRITE ( io, 412 ) prho_reference
990	ELSE
991	WRITE ( io, 413 ) pt_reference
992	ENDIF
993	ENDIF
994
995	!
996	!-- Cloud physics parameters
997	IF ( cloud_physics ) THEN
998	WRITE ( io, 415 )
999	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1000	ENDIF
1001
1002	!-- Profile of the geostrophic wind (component ug)
1003	!-- Building output strings
1004	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1005	gradients = '------'
1006	slices = ' 0'
1007	coordinates = ' 0.0'
1008	i = 1
1009	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1010
1011	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1012	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1013
1014	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1015	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1016
1017	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1018	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1019
1020	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1021	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1022
1023	i = i + 1
1024	ENDDO
1025
1026	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1027	TRIM( gradients ), TRIM( slices )
1028
1029	!-- Profile of the geostrophic wind (component vg)
1030	!-- Building output strings
1031	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1032	gradients = '------'
1033	slices = ' 0'
1034	coordinates = ' 0.0'
1035	i = 1
1036	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1037
1038	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1039	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1040
1041	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1042	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1043
1044	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1045	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1046
1047	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1048	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1049
1050	i = i + 1
1051	ENDDO
1052
1053	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1054	TRIM( gradients ), TRIM( slices )
1055
1056	!
1057	!-- Initial temperature profile
1058	!-- Building output strings, starting with surface temperature
1059	WRITE ( temperatures, '(F6.2)' ) pt_surface
1060	gradients = '------'
1061	slices = ' 0'
1062	coordinates = ' 0.0'
1063	i = 1
1064	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1065
1066	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1067	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1068
1069	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1070	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1071
1072	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1073	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1074
1075	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1076	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1077
1078	i = i + 1
1079	ENDDO
1080
1081	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1082	TRIM( gradients ), TRIM( slices )
1083
1084	!
1085	!-- Initial humidity profile
1086	!-- Building output strings, starting with surface humidity
1087	IF ( humidity .OR. passive_scalar ) THEN
1088	WRITE ( temperatures, '(E8.1)' ) q_surface
1089	gradients = '--------'
1090	slices = ' 0'
1091	coordinates = ' 0.0'
1092	i = 1
1093	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1094
1095	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1096	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1097
1098	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1099	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1100
1101	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1102	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1103
1104	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1105	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1106
1107	i = i + 1
1108	ENDDO
1109
1110	IF ( humidity ) THEN
1111	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1112	TRIM( gradients ), TRIM( slices )
1113	ELSE
1114	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1115	TRIM( gradients ), TRIM( slices )
1116	ENDIF
1117	ENDIF
1118
1119	!
1120	!-- Initial salinity profile
1121	!-- Building output strings, starting with surface salinity
1122	IF ( ocean ) THEN
1123	WRITE ( temperatures, '(F6.2)' ) sa_surface
1124	gradients = '------'
1125	slices = ' 0'
1126	coordinates = ' 0.0'
1127	i = 1
1128	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1129
1130	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1131	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1132
1133	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1134	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1135
1136	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1137	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1138
1139	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1140	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1141
1142	i = i + 1
1143	ENDDO
1144
1145	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1146	TRIM( gradients ), TRIM( slices )
1147	ENDIF
1148
1149	!
1150	!-- LES / turbulence parameters
1151	WRITE ( io, 450 )
1152
1153	!--
1154	! ... LES-constants used must still be added here
1155	!--
1156	IF ( constant_diffusion ) THEN
1157	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1158	prandtl_number
1159	ENDIF
1160	IF ( .NOT. constant_diffusion) THEN
1161	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1162	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1163	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1164	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1165	ENDIF
1166
1167	!
1168	!-- Special actions during the run
1169	WRITE ( io, 470 )
1170	IF ( create_disturbances ) THEN
1171	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1172	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1173	zu(disturbance_level_ind_t), disturbance_level_ind_t
1174	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1175	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1176	ELSE
1177	WRITE ( io, 473 ) disturbance_energy_limit
1178	ENDIF
1179	WRITE ( io, 474 ) TRIM( random_generator )
1180	ENDIF
1181	IF ( pt_surface_initial_change /= 0.0 ) THEN
1182	WRITE ( io, 475 ) pt_surface_initial_change
1183	ENDIF
1184	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1185	WRITE ( io, 476 ) q_surface_initial_change
1186	ENDIF
1187	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1188	WRITE ( io, 477 ) q_surface_initial_change
1189	ENDIF
1190
1191	IF ( particle_advection ) THEN
1192	!
1193	!-- Particle attributes
1194	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1195	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1196	end_time_prel, dt_sort_particles
1197	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1198	IF ( random_start_position ) WRITE ( io, 481 )
1199	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1200	WRITE ( io, 495 ) total_number_of_particles
1201	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1202	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1203	WRITE ( io, 483 ) maximum_number_of_tailpoints
1204	IF ( minimum_tailpoint_distance /= 0 ) THEN
1205	WRITE ( io, 484 ) total_number_of_tails, &
1206	minimum_tailpoint_distance, &
1207	maximum_tailpoint_age
1208	ENDIF
1209	ENDIF
1210	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1211	WRITE ( io, 485 ) dt_write_particle_data
1212	output_format = ''
1213	IF ( netcdf_output ) THEN
1214	IF ( netcdf_64bit ) THEN
1215	output_format = 'netcdf (64 bit offset) and binary'
1216	ELSE
1217	output_format = 'netcdf and binary'
1218	ENDIF
1219	ELSE
1220	output_format = 'binary'
1221	ENDIF
1222	WRITE ( io, 345 ) output_format
1223	ENDIF
1224	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1225	IF ( write_particle_statistics ) WRITE ( io, 486 )
1226
1227	WRITE ( io, 487 ) number_of_particle_groups
1228
1229	DO i = 1, number_of_particle_groups
1230	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1231	WRITE ( io, 490 ) i, 0.0
1232	WRITE ( io, 492 )
1233	ELSE
1234	WRITE ( io, 490 ) i, radius(i)
1235	IF ( density_ratio(i) /= 0.0 ) THEN
1236	WRITE ( io, 491 ) density_ratio(i)
1237	ELSE
1238	WRITE ( io, 492 )
1239	ENDIF
1240	ENDIF
1241	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1242	pdx(i), pdy(i), pdz(i)
1243	ENDDO
1244
1245	ENDIF
1246
1247
1248	!
1249	!-- Parameters of 1D-model
1250	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1251	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1252	mixing_length_1d, dissipation_1d
1253	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1254	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1255	ENDIF
1256	ENDIF
1257
1258	!
1259	!-- User-defined informations
1260	CALL user_header( io )
1261
1262	WRITE ( io, 99 )
1263
1264	!
1265	!-- Write buffer contents to disc immediately
1266	CALL local_flush( io )
1267
1268	!
1269	!-- Here the FORMATs start
1270
1271	99 FORMAT (1X,78('-'))
1272	100 FORMAT (/1X,'*************************',11X,42('-')/ &
1273	1X,'* ',A,' *',11X,A/ &
1274	1X,'*************************',11X,42('-'))
1275	101 FORMAT (37X,'coupled run: ',A/ &
1276	37X,42('-'))
1277	102 FORMAT (/' Date: ',A8,11X,'Run: ',A20/ &
1278	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1279	' Run on host: ',A10)
1280	#if defined( __parallel )
1281	103 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1282	')',1X,A)
1283	104 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1284	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1285	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1286	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1287	37X,'because the job is running on an SMP-cluster')
1288	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1289	#endif
1290	110 FORMAT (/' Numerical Schemes:'/ &
1291	' -----------------'/)
1292	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1293	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1294	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1295	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1296	' or Upstream')
1297	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1298	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1299	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1300	' or Upstream')
1301	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1302	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1303	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1304	' Translation velocity = ',A/ &
1305	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1306	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1307	' of timestep changes)')
1308	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1309	' timestep changes')
1310	122 FORMAT (' --> Time differencing scheme: ',A)
1311	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1312	' maximum damping coefficient: ',F5.3, ' 1/s')
1313	124 FORMAT (' Spline-overshoots are being suppressed')
1314	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1315	' of'/ &
1316	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1317	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1318	' of'/ &
1319	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1320	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1321	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1322	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1323	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1324	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1325	130 FORMAT (' --> Additional prognostic equation for the total water content')
1326	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1327	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1328	' effective emissivity scheme')
1329	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1330	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1331	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1332	A,'-cycle)'/ &
1333	' number of grid levels: ',I2/ &
1334	' Gauss-Seidel red/black iterations: ',I2)
1335	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1336	I3,')')
1337	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1338	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1339	I3,')'/ &
1340	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1341	I3,')')
1342	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1343	139 FORMAT (' --> Loop optimization method: ',A)
1344	140 FORMAT (' maximum residual allowed: ',E10.3)
1345	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1346	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1347	'step')
1348	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1349	'kinetic energy')
1350	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1351	'conserved')
1352	200 FORMAT (//' Run time and time step information:'/ &
1353	' ----------------------------------'/)
1354	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1355	' CFL-factor: ',F4.2)
1356	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1357	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1358	' End time: ',F9.3,' s')
1359	204 FORMAT ( A,F9.3,' s')
1360	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1361	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1362	' CPU-time used: ',F9.3,' s per timestep: ', &
1363	' ',F9.3,' s'/ &
1364	' per second of simulated tim', &
1365	'e: ',F9.3,' s')
1366	250 FORMAT (//' Computational grid and domain size:'/ &
1367	' ----------------------------------'// &
1368	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1369	' m dz = ',F7.3,' m'/ &
1370	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1371	' m z(u) = ',F10.3,' m'/)
1372	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1373	' factor: ',F5.3/ &
1374	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1375	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1376	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1377	255 FORMAT (' Subdomains have equal size')
1378	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1379	'have smaller sizes'/ &
1380	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1381	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1382	' degrees')
1383	270 FORMAT (//' Topography informations:'/ &
1384	' -----------------------'// &
1385	1X,'Topography: ',A)
1386	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1387	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1388	' / ',I4)
1389	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1390	' ------------------------------'// &
1391	' Canopy mode: ', A / &
1392	' Canopy top: ',I4 / &
1393	' Leaf drag coefficient: ',F6.2 /)
1394	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1395	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1396	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1397	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1398	' Height: ',A,' m'/ &
1399	' Leaf area density: ',A,' m2/m3'/ &
1400	' Gradient: ',A,' m2/m4'/ &
1401	' Gridpoint: ',A)
1402
1403	300 FORMAT (//' Boundary conditions:'/ &
1404	' -------------------'// &
1405	' p uv ', &
1406	' pt'// &
1407	' B. bound.: ',A/ &
1408	' T. bound.: ',A)
1409	301 FORMAT (/' ',A// &
1410	' B. bound.: ',A/ &
1411	' T. bound.: ',A)
1412	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1413	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1414	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1415	'computational u,v-level:'// &
1416	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1417	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1418	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1419	307 FORMAT (' Heatflux has a random normal distribution')
1420	308 FORMAT (' Predefined surface temperature')
1421	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1422	310 FORMAT (//' 1D-Model:'// &
1423	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1424	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1425	312 FORMAT (' Predefined surface humidity')
1426	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1427	314 FORMAT (' Predefined scalar value at the surface')
1428	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1429	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1430	'atmosphere model')
1431	317 FORMAT (//' Lateral boundaries:'/ &
1432	' left/right: ',A/ &
1433	' north/south: ',A)
1434	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1435	'max =',F5.1,' m**2/s')
1436	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1437	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1438	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1439	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1440	' v: ',F9.6,' m2/s2')
1441	325 FORMAT (//' List output:'/ &
1442	' -----------'// &
1443	' 1D-Profiles:'/ &
1444	' Output every ',F8.2,' s')
1445	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1446	' Averaging input every ',F8.2,' s')
1447	330 FORMAT (//' Data output:'/ &
1448	' -----------'/)
1449	331 FORMAT (/' 1D-Profiles:')
1450	332 FORMAT (/' ',A)
1451	333 FORMAT (' Output every ',F8.2,' s',/ &
1452	' Time averaged over ',F8.2,' s'/ &
1453	' Averaging input every ',F8.2,' s')
1454	334 FORMAT (/' 2D-Arrays',A,':')
1455	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1456	' Output every ',F8.2,' s ',A/ &
1457	' Cross sections at ',A1,' = ',A/ &
1458	' scalar-coordinates: ',A,' m'/)
1459	336 FORMAT (/' 3D-Arrays',A,':')
1460	337 FORMAT (/' Arrays: ',A/ &
1461	' Output every ',F8.2,' s ',A/ &
1462	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1463	338 FORMAT (' Compressed data output'/ &
1464	' Decimal precision: ',A/)
1465	339 FORMAT (' No output during initial ',F8.2,' s')
1466	340 FORMAT (/' Time series:')
1467	341 FORMAT (' Output every ',F8.2,' s'/)
1468	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1469	' Output every ',F8.2,' s ',A/ &
1470	' Time averaged over ',F8.2,' s'/ &
1471	' Averaging input every ',F8.2,' s'/ &
1472	' Cross sections at ',A1,' = ',A/ &
1473	' scalar-coordinates: ',A,' m'/)
1474	343 FORMAT (/' Arrays: ',A/ &
1475	' Output every ',F8.2,' s ',A/ &
1476	' Time averaged over ',F8.2,' s'/ &
1477	' Averaging input every ',F8.2,' s'/ &
1478	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1479	345 FORMAT (' Output format: ',A/)
1480	#if defined( __dvrp_graphics )
1481	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1482	' Output every ',F7.1,' s'/ &
1483	' Output mode: ',A/ &
1484	' Host / User: ',A,' / ',A/ &
1485	' Directory: ',A// &
1486	' The sequence contains:')
1487	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1488	362 FORMAT (' Sectional plane ',A)
1489	363 FORMAT (' Particles')
1490	#endif
1491	#if defined( __spectra )
1492	370 FORMAT (' Spectra:')
1493	371 FORMAT (' Output every ',F7.1,' s'/)
1494	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1495	' Directions: ', 10(A5,',')/ &
1496	' height levels k = ', 20(I3,',')/ &
1497	' ', 20(I3,',')/ &
1498	' ', 20(I3,',')/ &
1499	' ', 20(I3,',')/ &
1500	' ', 19(I3,','),I3,'.'/ &
1501	' height levels selected for standard plot:'/ &
1502	' k = ', 20(I3,',')/ &
1503	' ', 20(I3,',')/ &
1504	' ', 20(I3,',')/ &
1505	' ', 20(I3,',')/ &
1506	' ', 19(I3,','),I3,'.'/ &
1507	' Time averaged over ', F7.1, ' s,' / &
1508	' Profiles for the time averaging are taken every ', &
1509	F6.1,' s')
1510	#endif
1511	400 FORMAT (//' Physical quantities:'/ &
1512	' -------------------'/)
1513	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1514	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1515	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1516	' f* = ',F9.6,' 1/s')
1517	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1518	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1519	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1520	415 FORMAT (/' Cloud physics parameters:'/ &
1521	' ------------------------'/)
1522	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1523	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1524	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1525	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1526	' Vapourization heat : L_v = ',E8.2,' J/kg')
1527	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1528	' Height: ',A,' m'/ &
1529	' Temperature: ',A,' K'/ &
1530	' Gradient: ',A,' K/100m'/ &
1531	' Gridpoint: ',A)
1532	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1533	' Height: ',A,' m'/ &
1534	' Humidity: ',A,' kg/kg'/ &
1535	' Gradient: ',A,' (kg/kg)/100m'/ &
1536	' Gridpoint: ',A)
1537	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1538	' Height: ',A,' m'/ &
1539	' Scalar concentration: ',A,' kg/m**3'/ &
1540	' Gradient: ',A,' (kg/m**3)/100m'/ &
1541	' Gridpoint: ',A)
1542	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1543	' Height: ',A,' m'/ &
1544	' ug: ',A,' m/s'/ &
1545	' Gradient: ',A,' 1/100s'/ &
1546	' Gridpoint: ',A)
1547	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1548	' Height: ',A,' m'/ &
1549	' vg: ',A,' m/s'/ &
1550	' Gradient: ',A,' 1/100s'/ &
1551	' Gridpoint: ',A)
1552	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1553	' Height: ',A,' m'/ &
1554	' Salinity: ',A,' psu'/ &
1555	' Gradient: ',A,' psu/100m'/ &
1556	' Gridpoint: ',A)
1557	450 FORMAT (//' LES / Turbulence quantities:'/ &
1558	' ---------------------------'/)
1559	451 FORMAT (' Diffusion coefficients are constant:'/ &
1560	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1561	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1562	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1563	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1564	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1565	470 FORMAT (//' Actions during the simulation:'/ &
1566	' -----------------------------'/)
1567	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1568	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1569	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1570	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1571	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1572	' to i/j =',I4)
1573	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1574	1X,F5.3, ' m2/s2')
1575	474 FORMAT (' Random number generator used : ',A/)
1576	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1577	'respectively, if'/ &
1578	' the value is negative) by ',F5.2,' K at the beginning of the',&
1579	' 3D-simulation'/)
1580	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1581	'respectively, if the'/ &
1582	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1583	' the 3D-simulation'/)
1584	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1585	'respectively, if the'/ &
1586	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1587	' the 3D-simulation'/)
1588	480 FORMAT (' Particles:'/ &
1589	' ---------'// &
1590	' Particle advection is active (switched on at t = ', F7.1, &
1591	' s)'/ &
1592	' Start of new particle generations every ',F6.1,' s'/ &
1593	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1594	' bottom: ', A, ' top: ', A/&
1595	' Maximum particle age: ',F9.1,' s'/ &
1596	' Advection stopped at t = ',F9.1,' s'/ &
1597	' Particles are sorted every ',F9.1,' s'/)
1598	481 FORMAT (' Particles have random start positions'/)
1599	482 FORMAT (' Particles are advected only horizontally'/)
1600	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1601	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1602	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1603	' Maximum age of the end of the tail: ',F8.2,' s')
1604	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1605	486 FORMAT (' Particle statistics are written on file'/)
1606	487 FORMAT (' Number of particle groups: ',I2/)
1607	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1608	' minimum timestep for advection: ', F7.5/)
1609	489 FORMAT (' Number of particles simultaneously released at each ', &
1610	'point: ', I5/)
1611	490 FORMAT (' Particle group ',I2,':'/ &
1612	' Particle radius: ',E10.3, 'm')
1613	491 FORMAT (' Particle inertia is activated'/ &
1614	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1615	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1616	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1617	' y:',F8.1,' - ',F8.1,' m'/&
1618	' z:',F8.1,' - ',F8.1,' m'/&
1619	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1620	' m dz = ',F8.1,' m'/)
1621	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1622	F8.2,' s'/)
1623	495 FORMAT (' Number of particles in total domain: ',I10/)
1624	500 FORMAT (//' 1D-Model parameters:'/ &
1625	' -------------------'// &
1626	' Simulation time: ',F8.1,' s'/ &
1627	' Run-controll output every: ',F8.1,' s'/ &
1628	' Vertical profile output every: ',F8.1,' s'/ &
1629	' Mixing length calculation: ',A/ &
1630	' Dissipation calculation: ',A/)
1631	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1632
1633
1634	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |