Home

Context Navigation

header.f90 @ 143

Last change on this file since 143 was 139, checked in by raasch, 17 years ago

New:
---

Plant canopy model of Watanabe (2004,BLM 112,307-341) added.
It can be switched on by the inipar parameter plant_canopy.
The inipar parameter canopy_mode can be used to prescribe a
plant canopy type. The default case is a homogeneous plant
canopy. Heterogeneous distributions of the leaf area
density and the canopy drag coefficient can be defined in the
new routine user_init_plant_canopy (user_interface).
The inipar parameters lad_surface, lad_vertical_gradient and
lad_vertical_gradient_level can be used in order to
prescribe the vertical profile of leaf area density. The
inipar parameter drag_coefficient determines the canopy
drag coefficient.
Finally, the inipar parameter pch_index determines the
index of the upper boundary of the plant canopy.

Allow new case bc_uv_t = 'dirichlet_0' for channel flow.

For unknown variables (CASE DEFAULT) call new subroutine user_data_output_dvrp

Pressure boundary conditions for vertical walls added to the multigrid solver.
They are applied using new wall flag arrays (wall_flags_..) which are defined
for each grid level. New argument gls added to routine user_init_grid
(user_interface).

Frequence of sorting particles can be controlled with new particles_par
parameter dt_sort_particles. Sorting is moved from the SGS timestep loop in
advec_particles after the end of this loop.

advec_particles, check_parameters, data_output_dvrp, header, init_3d_model, init_grid, init_particles, init_pegrid, modules, package_parin, parin, plant_canopy_model, read_var_list, read_3d_binary, user_interface, write_var_list, write_3d_binary

Changed:

Redefine initial nzb_local as the actual total size of topography (later the
extent of topography in nzb_local is reduced by 1dx at the E topography walls
and by 1dy at the N topography walls to form the basis for nzb_s_inner);
for consistency redefine 'single_building' case.

Vertical profiles now based on nzb_s_inner; they are divided by
ngp_2dh_s_inner (scalars, procucts of scalars) and ngp_2dh (staggered velocity
components and their products, procucts of scalars and velocity components),
respectively.

Allow two instead of one digit to specify isosurface and slicer variables.

Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d (check_open)

prognostic_equations include the respective wall_*flux in the parameter list of
calls of diffusion_s. Same as before, only the values of wall_heatflux(0:4)
can be assigned. At present, wall_humidityflux, wall_qflux, wall_salinityflux,
and wall_scalarflux are kept zero. diffusion_s uses the respective wall_*flux
instead of wall_heatflux. This update serves two purposes:

it avoids errors in calculations with humidity/scalar/salinity and prescribed

non-zero wall_heatflux,

it prepares PALM for a possible assignment of wall fluxes of

humidity/scalar/salinity in a future release.

buoyancy, check_open, data_output_dvrp, diffusion_s, diffusivities, flow_statistics, header, init_3d_model, init_dvrp, init_grid, modules, prognostic_equations

Errors:

Bugfix: summation of sums_l_l in diffusivities.

Several bugfixes in the ocean part: Initial density rho is calculated
(init_ocean). Error in initializing u_init and v_init removed
(check_parameters). Calculation of density flux now starts from
nzb+1 (production_e).

Bugfix: pleft/pright changed to pnorth/psouth in sendrecv of particle tail
numbers along y, small bugfixes in the SGS part (advec_particles)

Bugfix: model_string needed a default value (combine_plot_fields)

Bugfix: wavenumber calculation for even nx in routines maketri (poisfft)

Bugfix: assignment of fluxes at walls

Bugfix: absolute value of f must be used when calculating the Blackadar mixing length (init_1d_model)

advec_particles, check_parameters, combine_plot_fields, diffusion_s, diffusivities, init_ocean, init_1d_model, poisfft, production_e

Property svn:keywords set to Id

File size: 60.8 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 139 2007-11-29 09:37:41Z raasch $
11	!
12	! 138 2007-11-28 10:03:58Z letzel
13	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
14	! Allow two instead of one digit to specify isosurface and slicer variables.
15	! Output of sorting frequency of particles
16	!
17	! 108 2007-08-24 15:10:38Z letzel
18	! Output of informations for coupled model runs (boundary conditions etc.)
19	! + output of momentumfluxes at the top boundary
20	! Rayleigh damping for ocean, e_init
21	!
22	! 97 2007-06-21 08:23:15Z raasch
23	! Adjustments for the ocean version.
24	! use_pt_reference renamed use_reference
25	!
26	! 87 2007-05-22 15:46:47Z raasch
27	! Bugfix: output of use_upstream_for_tke
28	!
29	! 82 2007-04-16 15:40:52Z raasch
30	! Preprocessor strings for different linux clusters changed to "lc",
31	! routine local_flush is used for buffer flushing
32	!
33	! 76 2007-03-29 00:58:32Z raasch
34	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
35	! output of the loop optimization method, moisture renamed humidity,
36	! output of subversion revision number
37	!
38	! 19 2007-02-23 04:53:48Z raasch
39	! Output of scalar flux applied at top boundary
40	!
41	! RCS Log replace by Id keyword, revision history cleaned up
42	!
43	! Revision 1.63 2006/08/22 13:53:13 raasch
44	! Output of dz_max
45	!
46	! Revision 1.1 1997/08/11 06:17:20 raasch
47	! Initial revision
48	!
49	!
50	! Description:
51	! ------------
52	! Writing a header with all important informations about the actual run.
53	! This subroutine is called three times, two times at the beginning
54	! (writing information on files RUN_CONTROL and HEADER) and one time at the
55	! end of the run, then writing additional information about CPU-usage on file
56	! header.
57	!------------------------------------------------------------------------------!
58
59	USE arrays_3d
60	USE control_parameters
61	USE cloud_parameters
62	USE cpulog
63	USE dvrp_variables
64	USE grid_variables
65	USE indices
66	USE model_1d
67	USE particle_attributes
68	USE pegrid
69	USE spectrum
70
71	IMPLICIT NONE
72
73	CHARACTER (LEN=1) :: prec
74	CHARACTER (LEN=2) :: do2d_mode
75	CHARACTER (LEN=5) :: section_chr
76	CHARACTER (LEN=9) :: time_to_string
77	CHARACTER (LEN=10) :: coor_chr, host_chr
78	CHARACTER (LEN=16) :: begin_chr
79	CHARACTER (LEN=21) :: ver_rev
80	CHARACTER (LEN=40) :: output_format
81	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
82	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
83	run_classification, slices, temperatures, learde, &
84	ugcomponent, vgcomponent
85	CHARACTER (LEN=85) :: roben, runten
86
87	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
88	REAL :: cpuseconds_per_simulated_second
89
90	!
91	!-- Open the output file. At the end of the simulation, output is directed
92	!-- to unit 19.
93	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
94	.NOT. simulated_time_at_begin /= simulated_time ) THEN
95	io = 15 ! header output on file RUN_CONTROL
96	ELSE
97	io = 19 ! header output on file HEADER
98	ENDIF
99	CALL check_open( io )
100
101	!
102	!-- At the end of the run, output file (HEADER) will be rewritten with
103	!-- new informations
104	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
105
106	!
107	!-- Determine kind of model run
108	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
109	run_classification = '3D - restart run'
110	ELSE
111	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
112	run_classification = '3D - run without 1D - prerun'
113	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
114	run_classification = '3D - run with 1D - prerun'
115	ELSE
116	PRINT*,'+++ header: unknown action(s): ',initializing_actions
117	ENDIF
118	ENDIF
119	IF ( ocean ) THEN
120	run_classification = 'ocean - ' // run_classification
121	ELSE
122	run_classification = 'atmosphere - ' // run_classification
123	ENDIF
124
125	!
126	!-- Run-identification, date, time, host
127	host_chr = host(1:10)
128	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
129	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
130	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
131	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
132	ADJUSTR( host_chr )
133	#if defined( __parallel )
134	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
135	char1 = 'calculated'
136	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
137	host(1:2) == 'lc' ) .AND. &
138	npex == -1 .AND. pdims(2) == 1 ) THEN
139	char1 = 'forced'
140	ELSE
141	char1 = 'predefined'
142	ENDIF
143	IF ( threads_per_task == 1 ) THEN
144	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
145	ELSE
146	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
147	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
148	ENDIF
149	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
150	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
151	npex == -1 .AND. pdims(2) == 1 ) &
152	THEN
153	WRITE ( io, 106 )
154	ELSEIF ( pdims(2) == 1 ) THEN
155	WRITE ( io, 107 ) 'x'
156	ELSEIF ( pdims(1) == 1 ) THEN
157	WRITE ( io, 107 ) 'y'
158	ENDIF
159	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
160	#endif
161	WRITE ( io, 99 )
162
163	!
164	!-- Numerical schemes
165	WRITE ( io, 110 )
166	IF ( psolver(1:7) == 'poisfft' ) THEN
167	WRITE ( io, 111 ) TRIM( fft_method )
168	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
169	ELSEIF ( psolver == 'sor' ) THEN
170	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
171	ELSEIF ( psolver == 'multigrid' ) THEN
172	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
173	IF ( mg_cycles == -1 ) THEN
174	WRITE ( io, 140 ) residual_limit
175	ELSE
176	WRITE ( io, 141 ) mg_cycles
177	ENDIF
178	IF ( mg_switch_to_pe0_level == 0 ) THEN
179	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
180	nzt_mg(1)
181	ELSE
182	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
183	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
184	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
185	nzt_mg(mg_switch_to_pe0_level), &
186	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
187	nzt_mg(1)
188	ENDIF
189	ENDIF
190	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
191	THEN
192	WRITE ( io, 142 )
193	ENDIF
194
195	IF ( momentum_advec == 'pw-scheme' ) THEN
196	WRITE ( io, 113 )
197	ELSE
198	WRITE ( io, 114 )
199	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
200	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
201	overshoot_limit_w /= 0.0 ) THEN
202	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
203	overshoot_limit_w
204	ENDIF
205	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
206	ups_limit_w /= 0.0 ) &
207	THEN
208	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
209	ENDIF
210	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
211	ENDIF
212	IF ( scalar_advec == 'pw-scheme' ) THEN
213	WRITE ( io, 116 )
214	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
215	WRITE ( io, 117 )
216	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
217	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
218	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
219	ENDIF
220	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
221	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
222	ENDIF
223	ELSE
224	WRITE ( io, 118 )
225	ENDIF
226
227	WRITE ( io, 139 ) TRIM( loop_optimization )
228
229	IF ( galilei_transformation ) THEN
230	IF ( use_ug_for_galilei_tr ) THEN
231	char1 = 'geostrophic wind'
232	ELSE
233	char1 = 'mean wind in model domain'
234	ENDIF
235	IF ( simulated_time_at_begin == simulated_time ) THEN
236	char2 = 'at the start of the run'
237	ELSE
238	char2 = 'at the end of the run'
239	ENDIF
240	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
241	advected_distance_x/1000.0, advected_distance_y/1000.0
242	ENDIF
243	IF ( timestep_scheme == 'leapfrog' ) THEN
244	WRITE ( io, 120 )
245	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
246	WRITE ( io, 121 )
247	ELSE
248	WRITE ( io, 122 ) timestep_scheme
249	ENDIF
250	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
251	IF ( rayleigh_damping_factor /= 0.0 ) THEN
252	IF ( .NOT. ocean ) THEN
253	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
254	rayleigh_damping_factor
255	ELSE
256	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
257	rayleigh_damping_factor
258	ENDIF
259	ENDIF
260	IF ( humidity ) THEN
261	IF ( .NOT. cloud_physics ) THEN
262	WRITE ( io, 129 )
263	ELSE
264	WRITE ( io, 130 )
265	WRITE ( io, 131 )
266	IF ( radiation ) WRITE ( io, 132 )
267	IF ( precipitation ) WRITE ( io, 133 )
268	ENDIF
269	ENDIF
270	IF ( passive_scalar ) WRITE ( io, 134 )
271	IF ( conserve_volume_flow ) WRITE ( io, 150 )
272	WRITE ( io, 99 )
273
274	!
275	!-- Runtime and timestep informations
276	WRITE ( io, 200 )
277	IF ( .NOT. dt_fixed ) THEN
278	WRITE ( io, 201 ) dt_max, cfl_factor
279	ELSE
280	WRITE ( io, 202 ) dt
281	ENDIF
282	WRITE ( io, 203 ) simulated_time_at_begin, end_time
283
284	IF ( time_restart /= 9999999.9 .AND. &
285	simulated_time_at_begin == simulated_time ) THEN
286	IF ( dt_restart == 9999999.9 ) THEN
287	WRITE ( io, 204 ) ' Restart at: ',time_restart
288	ELSE
289	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
290	ENDIF
291	ENDIF
292
293	IF ( simulated_time_at_begin /= simulated_time ) THEN
294	i = MAX ( log_point_s(10)%counts, 1 )
295	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
296	cpuseconds_per_simulated_second = 0.0
297	ELSE
298	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
299	( simulated_time - &
300	simulated_time_at_begin )
301	ENDIF
302	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
303	log_point_s(10)%sum / REAL( i ), &
304	cpuseconds_per_simulated_second
305	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
306	IF ( dt_restart == 9999999.9 ) THEN
307	WRITE ( io, 204 ) ' Next restart at: ',time_restart
308	ELSE
309	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
310	ENDIF
311	ENDIF
312	ENDIF
313
314	!
315	!-- Computational grid
316	IF ( .NOT. ocean ) THEN
317	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
318	IF ( dz_stretch_level_index < nzt+1 ) THEN
319	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
320	dz_stretch_factor, dz_max
321	ENDIF
322	ELSE
323	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
324	IF ( dz_stretch_level_index > 0 ) THEN
325	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
326	dz_stretch_factor, dz_max
327	ENDIF
328	ENDIF
329	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
330	MIN( nnz+2, nzt+2 )
331	IF ( numprocs > 1 ) THEN
332	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
333	WRITE ( io, 255 )
334	ELSE
335	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
336	ENDIF
337	ENDIF
338	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
339
340	!
341	!-- Topography
342	WRITE ( io, 270 ) topography
343	SELECT CASE ( TRIM( topography ) )
344
345	CASE ( 'flat' )
346	! no actions necessary
347
348	CASE ( 'single_building' )
349	blx = INT( building_length_x / dx )
350	bly = INT( building_length_y / dy )
351	bh = INT( building_height / dz )
352
353	IF ( building_wall_left == 9999999.9 ) THEN
354	building_wall_left = ( nx + 1 - blx ) / 2 * dx
355	ENDIF
356	bxl = INT ( building_wall_left / dx + 0.5 )
357	bxr = bxl + blx
358
359	IF ( building_wall_south == 9999999.9 ) THEN
360	building_wall_south = ( ny + 1 - bly ) / 2 * dy
361	ENDIF
362	bys = INT ( building_wall_south / dy + 0.5 )
363	byn = bys + bly
364
365	WRITE ( io, 271 ) building_length_x, building_length_y, &
366	building_height, bxl, bxr, bys, byn
367
368	END SELECT
369
370	IF ( plant_canopy ) THEN
371
372	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
373
374	!
375	!-- Leaf area density profile
376	!-- Building output strings, starting with surface value
377	WRITE ( learde, '(F6.2)' ) lad_surface
378	gradients = '------'
379	slices = ' 0'
380	coordinates = ' 0.0'
381	i = 1
382	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
383
384	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
385	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
386
387	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
388	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
389
390	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
391	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
392
393	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
394	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
395
396	i = i + 1
397	ENDDO
398
399	WRITE ( io, 281 ) TRIM( coordinates ), TRIM( learde ), &
400	TRIM( gradients ), TRIM( slices )
401
402	ENDIF
403
404	!
405	!-- Boundary conditions
406	IF ( ibc_p_b == 0 ) THEN
407	runten = 'p(0) = 0 \|'
408	ELSEIF ( ibc_p_b == 1 ) THEN
409	runten = 'p(0) = p(1) \|'
410	ELSE
411	runten = 'p(0) = p(1) +R\|'
412	ENDIF
413	IF ( ibc_p_t == 0 ) THEN
414	roben = 'p(nzt+1) = 0 \|'
415	ELSE
416	roben = 'p(nzt+1) = p(nzt) \|'
417	ENDIF
418
419	IF ( ibc_uv_b == 0 ) THEN
420	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
421	ELSE
422	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
423	ENDIF
424	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
425	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
426	ELSEIF ( ibc_uv_t == 0 ) THEN
427	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
428	ELSE
429	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
430	ENDIF
431
432	IF ( ibc_pt_b == 0 ) THEN
433	runten = TRIM( runten ) // ' pt(0) = pt_surface'
434	ELSEIF ( ibc_pt_b == 1 ) THEN
435	runten = TRIM( runten ) // ' pt(0) = pt(1)'
436	ELSEIF ( ibc_pt_b == 2 ) THEN
437	runten = TRIM( runten ) // ' pt(0) = from coupled model'
438	ENDIF
439	IF ( ibc_pt_t == 0 ) THEN
440	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
441	ELSEIF( ibc_pt_t == 1 ) THEN
442	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
443	ELSEIF( ibc_pt_t == 2 ) THEN
444	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
445	ENDIF
446
447	WRITE ( io, 300 ) runten, roben
448
449	IF ( .NOT. constant_diffusion ) THEN
450	IF ( ibc_e_b == 1 ) THEN
451	runten = 'e(0) = e(1)'
452	ELSE
453	runten = 'e(0) = e(1) = (u/0.1)*2'
454	ENDIF
455	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
456
457	WRITE ( io, 301 ) 'e', runten, roben
458
459	ENDIF
460
461	IF ( ocean ) THEN
462	runten = 'sa(0) = sa(1)'
463	IF ( ibc_sa_t == 0 ) THEN
464	roben = 'sa(nzt+1) = sa_surface'
465	ELSE
466	roben = 'sa(nzt+1) = sa(nzt)'
467	ENDIF
468	WRITE ( io, 301 ) 'sa', runten, roben
469	ENDIF
470
471	IF ( humidity ) THEN
472	IF ( ibc_q_b == 0 ) THEN
473	runten = 'q(0) = q_surface'
474	ELSE
475	runten = 'q(0) = q(1)'
476	ENDIF
477	IF ( ibc_q_t == 0 ) THEN
478	roben = 'q(nzt) = q_top'
479	ELSE
480	roben = 'q(nzt) = q(nzt-1) + dq/dz'
481	ENDIF
482	WRITE ( io, 301 ) 'q', runten, roben
483	ENDIF
484
485	IF ( passive_scalar ) THEN
486	IF ( ibc_q_b == 0 ) THEN
487	runten = 's(0) = s_surface'
488	ELSE
489	runten = 's(0) = s(1)'
490	ENDIF
491	IF ( ibc_q_t == 0 ) THEN
492	roben = 's(nzt) = s_top'
493	ELSE
494	roben = 's(nzt) = s(nzt-1) + ds/dz'
495	ENDIF
496	WRITE ( io, 301 ) 's', runten, roben
497	ENDIF
498
499	IF ( use_surface_fluxes ) THEN
500	WRITE ( io, 303 )
501	IF ( constant_heatflux ) THEN
502	WRITE ( io, 306 ) surface_heatflux
503	IF ( random_heatflux ) WRITE ( io, 307 )
504	ENDIF
505	IF ( humidity .AND. constant_waterflux ) THEN
506	WRITE ( io, 311 ) surface_waterflux
507	ENDIF
508	IF ( passive_scalar .AND. constant_waterflux ) THEN
509	WRITE ( io, 313 ) surface_waterflux
510	ENDIF
511	ENDIF
512
513	IF ( use_top_fluxes ) THEN
514	WRITE ( io, 304 )
515	IF ( coupling_mode == 'uncoupled' ) THEN
516	WRITE ( io, 319 ) top_momentumflux_u, top_momentumflux_v
517	IF ( constant_top_heatflux ) THEN
518	WRITE ( io, 306 ) top_heatflux
519	ENDIF
520	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
521	WRITE ( io, 316 )
522	ENDIF
523	IF ( ocean .AND. constant_top_salinityflux ) THEN
524	WRITE ( io, 309 ) top_salinityflux
525	ENDIF
526	IF ( humidity .OR. passive_scalar ) THEN
527	WRITE ( io, 315 )
528	ENDIF
529	ENDIF
530
531	IF ( prandtl_layer ) THEN
532	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
533	rif_min, rif_max
534	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
535	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
536	WRITE ( io, 312 )
537	ENDIF
538	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
539	WRITE ( io, 314 )
540	ENDIF
541	ELSE
542	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
543	WRITE ( io, 310 ) rif_min, rif_max
544	ENDIF
545	ENDIF
546
547	WRITE ( io, 317 ) bc_lr, bc_ns
548	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
549	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
550	ENDIF
551
552	!
553	!-- Listing of 1D-profiles
554	WRITE ( io, 320 ) dt_dopr_listing
555	IF ( averaging_interval_pr /= 0.0 ) THEN
556	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
557	ENDIF
558
559	!
560	!-- DATA output
561	WRITE ( io, 330 )
562	IF ( averaging_interval_pr /= 0.0 ) THEN
563	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
564	ENDIF
565
566	!
567	!-- 1D-profiles
568	dopr_chr = 'Profile:'
569	IF ( dopr_n /= 0 ) THEN
570	WRITE ( io, 331 )
571
572	output_format = ''
573	IF ( netcdf_output ) THEN
574	IF ( netcdf_64bit ) THEN
575	output_format = 'netcdf (64 bit offset)'
576	ELSE
577	output_format = 'netcdf'
578	ENDIF
579	ENDIF
580	IF ( profil_output ) THEN
581	IF ( netcdf_output ) THEN
582	output_format = TRIM( output_format ) // ' and profil'
583	ELSE
584	output_format = 'profil'
585	ENDIF
586	ENDIF
587	WRITE ( io, 345 ) output_format
588
589	DO i = 1, dopr_n
590	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
591	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
592	WRITE ( io, 332 ) dopr_chr
593	dopr_chr = ' :'
594	ENDIF
595	ENDDO
596
597	IF ( dopr_chr /= '' ) THEN
598	WRITE ( io, 332 ) dopr_chr
599	ENDIF
600	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
601	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
602	ENDIF
603
604	!
605	!-- 2D-arrays
606	DO av = 0, 1
607
608	i = 1
609	do2d_xy = ''
610	do2d_xz = ''
611	do2d_yz = ''
612	DO WHILE ( do2d(av,i) /= ' ' )
613
614	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
615	do2d_mode = do2d(av,i)(l-1:l)
616
617	SELECT CASE ( do2d_mode )
618	CASE ( 'xy' )
619	ll = LEN_TRIM( do2d_xy )
620	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
621	CASE ( 'xz' )
622	ll = LEN_TRIM( do2d_xz )
623	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
624	CASE ( 'yz' )
625	ll = LEN_TRIM( do2d_yz )
626	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
627	END SELECT
628
629	i = i + 1
630
631	ENDDO
632
633	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
634	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
635	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
636	( netcdf_output .OR. iso2d_output ) ) THEN
637
638	IF ( av == 0 ) THEN
639	WRITE ( io, 334 ) ''
640	ELSE
641	WRITE ( io, 334 ) '(time-averaged)'
642	ENDIF
643
644	IF ( do2d_at_begin ) THEN
645	begin_chr = 'and at the start'
646	ELSE
647	begin_chr = ''
648	ENDIF
649
650	output_format = ''
651	IF ( netcdf_output ) THEN
652	IF ( netcdf_64bit ) THEN
653	output_format = 'netcdf (64 bit offset)'
654	ELSE
655	output_format = 'netcdf'
656	ENDIF
657	ENDIF
658	IF ( iso2d_output ) THEN
659	IF ( netcdf_output ) THEN
660	output_format = TRIM( output_format ) // ' and iso2d'
661	ELSE
662	output_format = 'iso2d'
663	ENDIF
664	ENDIF
665	WRITE ( io, 345 ) output_format
666
667	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
668	i = 1
669	slices = '/'
670	coordinates = '/'
671	!
672	!-- Building strings with index and coordinate informations of the
673	!-- slices
674	DO WHILE ( section(i,1) /= -9999 )
675
676	WRITE (section_chr,'(I5)') section(i,1)
677	section_chr = ADJUSTL( section_chr )
678	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
679
680	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
681	coor_chr = ADJUSTL( coor_chr )
682	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
683
684	i = i + 1
685	ENDDO
686	IF ( av == 0 ) THEN
687	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
688	TRIM( begin_chr ), 'k', TRIM( slices ), &
689	TRIM( coordinates )
690	IF ( skip_time_do2d_xy /= 0.0 ) THEN
691	WRITE ( io, 339 ) skip_time_do2d_xy
692	ENDIF
693	ELSE
694	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
695	TRIM( begin_chr ), averaging_interval, &
696	dt_averaging_input, 'k', TRIM( slices ), &
697	TRIM( coordinates )
698	IF ( skip_time_data_output_av /= 0.0 ) THEN
699	WRITE ( io, 339 ) skip_time_data_output_av
700	ENDIF
701	ENDIF
702
703	ENDIF
704
705	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
706	i = 1
707	slices = '/'
708	coordinates = '/'
709	!
710	!-- Building strings with index and coordinate informations of the
711	!-- slices
712	DO WHILE ( section(i,2) /= -9999 )
713
714	WRITE (section_chr,'(I5)') section(i,2)
715	section_chr = ADJUSTL( section_chr )
716	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
717
718	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
719	coor_chr = ADJUSTL( coor_chr )
720	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
721
722	i = i + 1
723	ENDDO
724	IF ( av == 0 ) THEN
725	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
726	TRIM( begin_chr ), 'j', TRIM( slices ), &
727	TRIM( coordinates )
728	IF ( skip_time_do2d_xz /= 0.0 ) THEN
729	WRITE ( io, 339 ) skip_time_do2d_xz
730	ENDIF
731	ELSE
732	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
733	TRIM( begin_chr ), averaging_interval, &
734	dt_averaging_input, 'j', TRIM( slices ), &
735	TRIM( coordinates )
736	IF ( skip_time_data_output_av /= 0.0 ) THEN
737	WRITE ( io, 339 ) skip_time_data_output_av
738	ENDIF
739	ENDIF
740	ENDIF
741
742	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
743	i = 1
744	slices = '/'
745	coordinates = '/'
746	!
747	!-- Building strings with index and coordinate informations of the
748	!-- slices
749	DO WHILE ( section(i,3) /= -9999 )
750
751	WRITE (section_chr,'(I5)') section(i,3)
752	section_chr = ADJUSTL( section_chr )
753	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
754
755	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
756	coor_chr = ADJUSTL( coor_chr )
757	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
758
759	i = i + 1
760	ENDDO
761	IF ( av == 0 ) THEN
762	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
763	TRIM( begin_chr ), 'i', TRIM( slices ), &
764	TRIM( coordinates )
765	IF ( skip_time_do2d_yz /= 0.0 ) THEN
766	WRITE ( io, 339 ) skip_time_do2d_yz
767	ENDIF
768	ELSE
769	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
770	TRIM( begin_chr ), averaging_interval, &
771	dt_averaging_input, 'i', TRIM( slices ), &
772	TRIM( coordinates )
773	IF ( skip_time_data_output_av /= 0.0 ) THEN
774	WRITE ( io, 339 ) skip_time_data_output_av
775	ENDIF
776	ENDIF
777	ENDIF
778
779	ENDIF
780
781	ENDDO
782
783	!
784	!-- 3d-arrays
785	DO av = 0, 1
786
787	i = 1
788	do3d_chr = ''
789	DO WHILE ( do3d(av,i) /= ' ' )
790
791	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
792	i = i + 1
793
794	ENDDO
795
796	IF ( do3d_chr /= '' ) THEN
797	IF ( av == 0 ) THEN
798	WRITE ( io, 336 ) ''
799	ELSE
800	WRITE ( io, 336 ) '(time-averaged)'
801	ENDIF
802
803	output_format = ''
804	IF ( netcdf_output ) THEN
805	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
806	output_format = 'netcdf (64 bit offset)'
807	ELSE
808	output_format = 'netcdf'
809	ENDIF
810	ENDIF
811	IF ( avs_output ) THEN
812	IF ( netcdf_output ) THEN
813	output_format = TRIM( output_format ) // ' and avs'
814	ELSE
815	output_format = 'avs'
816	ENDIF
817	ENDIF
818	WRITE ( io, 345 ) output_format
819
820	IF ( do3d_at_begin ) THEN
821	begin_chr = 'and at the start'
822	ELSE
823	begin_chr = ''
824	ENDIF
825	IF ( av == 0 ) THEN
826	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
827	zu(nz_do3d), nz_do3d
828	ELSE
829	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
830	TRIM( begin_chr ), averaging_interval, &
831	dt_averaging_input, zu(nz_do3d), nz_do3d
832	ENDIF
833
834	IF ( do3d_compress ) THEN
835	do3d_chr = ''
836	i = 1
837	DO WHILE ( do3d(av,i) /= ' ' )
838
839	SELECT CASE ( do3d(av,i) )
840	CASE ( 'u' )
841	j = 1
842	CASE ( 'v' )
843	j = 2
844	CASE ( 'w' )
845	j = 3
846	CASE ( 'p' )
847	j = 4
848	CASE ( 'pt' )
849	j = 5
850	END SELECT
851	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
852	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
853	':' // prec // ','
854	i = i + 1
855
856	ENDDO
857	WRITE ( io, 338 ) do3d_chr
858
859	ENDIF
860
861	IF ( av == 0 ) THEN
862	IF ( skip_time_do3d /= 0.0 ) THEN
863	WRITE ( io, 339 ) skip_time_do3d
864	ENDIF
865	ELSE
866	IF ( skip_time_data_output_av /= 0.0 ) THEN
867	WRITE ( io, 339 ) skip_time_data_output_av
868	ENDIF
869	ENDIF
870
871	ENDIF
872
873	ENDDO
874
875	!
876	!-- Timeseries
877	IF ( dt_dots /= 9999999.9 ) THEN
878	WRITE ( io, 340 )
879
880	output_format = ''
881	IF ( netcdf_output ) THEN
882	IF ( netcdf_64bit ) THEN
883	output_format = 'netcdf (64 bit offset)'
884	ELSE
885	output_format = 'netcdf'
886	ENDIF
887	ENDIF
888	IF ( profil_output ) THEN
889	IF ( netcdf_output ) THEN
890	output_format = TRIM( output_format ) // ' and profil'
891	ELSE
892	output_format = 'profil'
893	ENDIF
894	ENDIF
895	WRITE ( io, 345 ) output_format
896	WRITE ( io, 341 ) dt_dots
897	ENDIF
898
899	#if defined( __dvrp_graphics )
900	!
901	!-- Dvrp-output
902	IF ( dt_dvrp /= 9999999.9 ) THEN
903	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
904	TRIM( dvrp_username ), TRIM( dvrp_directory )
905	i = 1
906	l = 0
907	DO WHILE ( mode_dvrp(i) /= ' ' )
908	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
909	READ ( mode_dvrp(i), '(10X,I2)' ) j
910	l = l + 1
911	IF ( do3d(0,j) /= ' ' ) THEN
912	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
913	ENDIF
914	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
915	READ ( mode_dvrp(i), '(6X,I2)' ) j
916	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
917	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
918	WRITE ( io, 363 )
919	ENDIF
920	i = i + 1
921	ENDDO
922	ENDIF
923	#endif
924
925	#if defined( __spectra )
926	!
927	!-- Spectra output
928	IF ( dt_dosp /= 9999999.9 ) THEN
929	WRITE ( io, 370 )
930
931	output_format = ''
932	IF ( netcdf_output ) THEN
933	IF ( netcdf_64bit ) THEN
934	output_format = 'netcdf (64 bit offset)'
935	ELSE
936	output_format = 'netcdf'
937	ENDIF
938	ENDIF
939	IF ( profil_output ) THEN
940	IF ( netcdf_output ) THEN
941	output_format = TRIM( output_format ) // ' and profil'
942	ELSE
943	output_format = 'profil'
944	ENDIF
945	ENDIF
946	WRITE ( io, 345 ) output_format
947	WRITE ( io, 371 ) dt_dosp
948	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
949	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
950	( spectra_direction(i), i = 1,10 ), &
951	( comp_spectra_level(i), i = 1,10 ), &
952	( plot_spectra_level(i), i = 1,10 ), &
953	averaging_interval_sp, dt_averaging_input_pr
954	ENDIF
955	#endif
956
957	WRITE ( io, 99 )
958
959	!
960	!-- Physical quantities
961	WRITE ( io, 400 )
962
963	!
964	!-- Geostrophic parameters
965	WRITE ( io, 410 ) omega, phi, f, fs
966
967	!
968	!-- Other quantities
969	WRITE ( io, 411 ) g
970	IF ( use_reference ) THEN
971	IF ( ocean ) THEN
972	WRITE ( io, 412 ) prho_reference
973	ELSE
974	WRITE ( io, 413 ) pt_reference
975	ENDIF
976	ENDIF
977
978	!
979	!-- Cloud physics parameters
980	IF ( cloud_physics ) THEN
981	WRITE ( io, 415 )
982	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
983	ENDIF
984
985	!-- Profile of the geostrophic wind (component ug)
986	!-- Building output strings
987	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
988	gradients = '------'
989	slices = ' 0'
990	coordinates = ' 0.0'
991	i = 1
992	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
993
994	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
995	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
996
997	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
998	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
999
1000	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
1001	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1002
1003	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
1004	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1005
1006	i = i + 1
1007	ENDDO
1008
1009	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1010	TRIM( gradients ), TRIM( slices )
1011
1012	!-- Profile of the geostrophic wind (component vg)
1013	!-- Building output strings
1014	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1015	gradients = '------'
1016	slices = ' 0'
1017	coordinates = ' 0.0'
1018	i = 1
1019	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1020
1021	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
1022	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1023
1024	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
1025	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1026
1027	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
1028	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1029
1030	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
1031	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1032
1033	i = i + 1
1034	ENDDO
1035
1036	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1037	TRIM( gradients ), TRIM( slices )
1038
1039	!
1040	!-- Initial temperature profile
1041	!-- Building output strings, starting with surface temperature
1042	WRITE ( temperatures, '(F6.2)' ) pt_surface
1043	gradients = '------'
1044	slices = ' 0'
1045	coordinates = ' 0.0'
1046	i = 1
1047	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1048
1049	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1050	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1051
1052	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1053	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1054
1055	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1056	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1057
1058	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1059	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1060
1061	i = i + 1
1062	ENDDO
1063
1064	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1065	TRIM( gradients ), TRIM( slices )
1066
1067	!
1068	!-- Initial humidity profile
1069	!-- Building output strings, starting with surface humidity
1070	IF ( humidity .OR. passive_scalar ) THEN
1071	WRITE ( temperatures, '(E8.1)' ) q_surface
1072	gradients = '--------'
1073	slices = ' 0'
1074	coordinates = ' 0.0'
1075	i = 1
1076	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1077
1078	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1079	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1080
1081	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1082	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1083
1084	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1085	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1086
1087	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1088	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1089
1090	i = i + 1
1091	ENDDO
1092
1093	IF ( humidity ) THEN
1094	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1095	TRIM( gradients ), TRIM( slices )
1096	ELSE
1097	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1098	TRIM( gradients ), TRIM( slices )
1099	ENDIF
1100	ENDIF
1101
1102	!
1103	!-- Initial salinity profile
1104	!-- Building output strings, starting with surface salinity
1105	IF ( ocean ) THEN
1106	WRITE ( temperatures, '(F6.2)' ) sa_surface
1107	gradients = '------'
1108	slices = ' 0'
1109	coordinates = ' 0.0'
1110	i = 1
1111	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1112
1113	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1114	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1115
1116	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1117	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1118
1119	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1120	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1121
1122	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1123	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1124
1125	i = i + 1
1126	ENDDO
1127
1128	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1129	TRIM( gradients ), TRIM( slices )
1130	ENDIF
1131
1132	!
1133	!-- LES / turbulence parameters
1134	WRITE ( io, 450 )
1135
1136	!--
1137	! ... LES-constants used must still be added here
1138	!--
1139	IF ( constant_diffusion ) THEN
1140	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1141	prandtl_number
1142	ENDIF
1143	IF ( .NOT. constant_diffusion) THEN
1144	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1145	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1146	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1147	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1148	ENDIF
1149
1150	!
1151	!-- Special actions during the run
1152	WRITE ( io, 470 )
1153	IF ( create_disturbances ) THEN
1154	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1155	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1156	zu(disturbance_level_ind_t), disturbance_level_ind_t
1157	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1158	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1159	ELSE
1160	WRITE ( io, 473 ) disturbance_energy_limit
1161	ENDIF
1162	WRITE ( io, 474 ) TRIM( random_generator )
1163	ENDIF
1164	IF ( pt_surface_initial_change /= 0.0 ) THEN
1165	WRITE ( io, 475 ) pt_surface_initial_change
1166	ENDIF
1167	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1168	WRITE ( io, 476 ) q_surface_initial_change
1169	ENDIF
1170	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1171	WRITE ( io, 477 ) q_surface_initial_change
1172	ENDIF
1173
1174	IF ( particle_advection ) THEN
1175	!
1176	!-- Particle attributes
1177	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1178	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1179	end_time_prel, dt_sort_particles
1180	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1181	IF ( random_start_position ) WRITE ( io, 481 )
1182	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1183	WRITE ( io, 495 ) total_number_of_particles
1184	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1185	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1186	WRITE ( io, 483 ) maximum_number_of_tailpoints
1187	IF ( minimum_tailpoint_distance /= 0 ) THEN
1188	WRITE ( io, 484 ) total_number_of_tails, &
1189	minimum_tailpoint_distance, &
1190	maximum_tailpoint_age
1191	ENDIF
1192	ENDIF
1193	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1194	WRITE ( io, 485 ) dt_write_particle_data
1195	output_format = ''
1196	IF ( netcdf_output ) THEN
1197	IF ( netcdf_64bit ) THEN
1198	output_format = 'netcdf (64 bit offset) and binary'
1199	ELSE
1200	output_format = 'netcdf and binary'
1201	ENDIF
1202	ELSE
1203	output_format = 'binary'
1204	ENDIF
1205	WRITE ( io, 345 ) output_format
1206	ENDIF
1207	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1208	IF ( write_particle_statistics ) WRITE ( io, 486 )
1209
1210	WRITE ( io, 487 ) number_of_particle_groups
1211
1212	DO i = 1, number_of_particle_groups
1213	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1214	WRITE ( io, 490 ) i, 0.0
1215	WRITE ( io, 492 )
1216	ELSE
1217	WRITE ( io, 490 ) i, radius(i)
1218	IF ( density_ratio(i) /= 0.0 ) THEN
1219	WRITE ( io, 491 ) density_ratio(i)
1220	ELSE
1221	WRITE ( io, 492 )
1222	ENDIF
1223	ENDIF
1224	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1225	pdx(i), pdy(i), pdz(i)
1226	ENDDO
1227
1228	ENDIF
1229
1230
1231	!
1232	!-- Parameters of 1D-model
1233	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1234	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1235	mixing_length_1d, dissipation_1d
1236	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1237	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1238	ENDIF
1239	ENDIF
1240
1241	!
1242	!-- User-defined informations
1243	CALL user_header( io )
1244
1245	WRITE ( io, 99 )
1246
1247	!
1248	!-- Write buffer contents to disc immediately
1249	CALL local_flush( io )
1250
1251	!
1252	!-- Here the FORMATs start
1253
1254	99 FORMAT (1X,78('-'))
1255	100 FORMAT (/1X,'*************************',11X,42('-')/ &
1256	1X,'* ',A,' *',11X,A/ &
1257	1X,'*************************',11X,42('-'))
1258	101 FORMAT (37X,'coupled run: ',A/ &
1259	37X,42('-'))
1260	102 FORMAT (/' Date: ',A8,11X,'Run: ',A20/ &
1261	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1262	' Run on host: ',A10)
1263	#if defined( __parallel )
1264	103 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1265	')',1X,A)
1266	104 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1267	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1268	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1269	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1270	37X,'because the job is running on an SMP-cluster')
1271	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1272	#endif
1273	110 FORMAT (/' Numerical Schemes:'/ &
1274	' -----------------'/)
1275	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1276	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1277	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1278	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1279	' or Upstream')
1280	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1281	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1282	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1283	' or Upstream')
1284	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1285	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1286	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1287	' Translation velocity = ',A/ &
1288	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1289	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1290	' of timestep changes)')
1291	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1292	' timestep changes')
1293	122 FORMAT (' --> Time differencing scheme: ',A)
1294	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1295	' maximum damping coefficient: ',F5.3, ' 1/s')
1296	124 FORMAT (' Spline-overshoots are being suppressed')
1297	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1298	' of'/ &
1299	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1300	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1301	' of'/ &
1302	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1303	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1304	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1305	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1306	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1307	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1308	130 FORMAT (' --> Additional prognostic equation for the total water content')
1309	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1310	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1311	' effective emissivity scheme')
1312	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1313	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1314	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1315	A,'-cycle)'/ &
1316	' number of grid levels: ',I2/ &
1317	' Gauss-Seidel red/black iterations: ',I2)
1318	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1319	I3,')')
1320	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1321	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1322	I3,')'/ &
1323	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1324	I3,')')
1325	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1326	139 FORMAT (' --> Loop optimization method: ',A)
1327	140 FORMAT (' maximum residual allowed: ',E10.3)
1328	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1329	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1330	'step')
1331	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1332	'kinetic energy')
1333	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1334	'conserved')
1335	200 FORMAT (//' Run time and time step information:'/ &
1336	' ----------------------------------'/)
1337	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1338	' CFL-factor: ',F4.2)
1339	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1340	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1341	' End time: ',F9.3,' s')
1342	204 FORMAT ( A,F9.3,' s')
1343	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1344	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1345	' CPU-time used: ',F9.3,' s per timestep: ', &
1346	' ',F9.3,' s'/ &
1347	' per second of simulated tim', &
1348	'e: ',F9.3,' s')
1349	250 FORMAT (//' Computational grid and domain size:'/ &
1350	' ----------------------------------'// &
1351	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1352	' m dz = ',F7.3,' m'/ &
1353	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1354	' m z(u) = ',F10.3,' m'/)
1355	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1356	' factor: ',F5.3/ &
1357	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1358	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1359	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1360	255 FORMAT (' Subdomains have equal size')
1361	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1362	'have smaller sizes'/ &
1363	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1364	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1365	' degrees')
1366	270 FORMAT (//' Topography informations:'/ &
1367	' -----------------------'// &
1368	1X,'Topography: ',A)
1369	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1370	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1371	' / ',I4)
1372	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1373	' ------------------------------'// &
1374	' Canopy mode: ', A / &
1375	' Canopy top: ',I4 / &
1376	' Leaf drag coefficient: ',F6.2 /)
1377	281 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1378	' Height: ',A,' m'/ &
1379	' Leaf area density: ',A,' m2/m3'/ &
1380	' Gradient: ',A,' m2/m4'/ &
1381	' Gridpoint: ',A)
1382
1383	300 FORMAT (//' Boundary conditions:'/ &
1384	' -------------------'// &
1385	' p uv ', &
1386	' pt'// &
1387	' B. bound.: ',A/ &
1388	' T. bound.: ',A)
1389	301 FORMAT (/' ',A// &
1390	' B. bound.: ',A/ &
1391	' T. bound.: ',A)
1392	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1393	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1394	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1395	'computational u,v-level:'// &
1396	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1397	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1398	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1399	307 FORMAT (' Heatflux has a random normal distribution')
1400	308 FORMAT (' Predefined surface temperature')
1401	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1402	310 FORMAT (//' 1D-Model:'// &
1403	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1404	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1405	312 FORMAT (' Predefined surface humidity')
1406	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1407	314 FORMAT (' Predefined scalar value at the surface')
1408	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1409	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1410	'atmosphere model')
1411	317 FORMAT (//' Lateral boundaries:'/ &
1412	' left/right: ',A/ &
1413	' north/south: ',A)
1414	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1415	'max =',F5.1,' m**2/s')
1416	319 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1417	' v: ',F9.6,' m2/s2')
1418	320 FORMAT (//' List output:'/ &
1419	' -----------'// &
1420	' 1D-Profiles:'/ &
1421	' Output every ',F8.2,' s')
1422	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
1423	' Averaging input every ',F8.2,' s')
1424	330 FORMAT (//' Data output:'/ &
1425	' -----------'/)
1426	331 FORMAT (/' 1D-Profiles:')
1427	332 FORMAT (/' ',A)
1428	333 FORMAT (' Output every ',F8.2,' s',/ &
1429	' Time averaged over ',F8.2,' s'/ &
1430	' Averaging input every ',F8.2,' s')
1431	334 FORMAT (/' 2D-Arrays',A,':')
1432	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1433	' Output every ',F8.2,' s ',A/ &
1434	' Cross sections at ',A1,' = ',A/ &
1435	' scalar-coordinates: ',A,' m'/)
1436	336 FORMAT (/' 3D-Arrays',A,':')
1437	337 FORMAT (/' Arrays: ',A/ &
1438	' Output every ',F8.2,' s ',A/ &
1439	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1440	338 FORMAT (' Compressed data output'/ &
1441	' Decimal precision: ',A/)
1442	339 FORMAT (' No output during initial ',F8.2,' s')
1443	340 FORMAT (/' Time series:')
1444	341 FORMAT (' Output every ',F8.2,' s'/)
1445	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1446	' Output every ',F8.2,' s ',A/ &
1447	' Time averaged over ',F8.2,' s'/ &
1448	' Averaging input every ',F8.2,' s'/ &
1449	' Cross sections at ',A1,' = ',A/ &
1450	' scalar-coordinates: ',A,' m'/)
1451	343 FORMAT (/' Arrays: ',A/ &
1452	' Output every ',F8.2,' s ',A/ &
1453	' Time averaged over ',F8.2,' s'/ &
1454	' Averaging input every ',F8.2,' s'/ &
1455	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1456	345 FORMAT (' Output format: ',A/)
1457	#if defined( __dvrp_graphics )
1458	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1459	' Output every ',F7.1,' s'/ &
1460	' Output mode: ',A/ &
1461	' Host / User: ',A,' / ',A/ &
1462	' Directory: ',A// &
1463	' The sequence contains:')
1464	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1465	362 FORMAT (' Sectional plane ',A)
1466	363 FORMAT (' Particles')
1467	#endif
1468	#if defined( __spectra )
1469	370 FORMAT (' Spectra:')
1470	371 FORMAT (' Output every ',F7.1,' s'/)
1471	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1472	' Directions: ', 10(A5,',')/ &
1473	' height levels k = ', 9(I3,','),I3,'.'/ &
1474	' height levels selected for standard plot:'/ &
1475	' k = ', 9(I3,','),I3,'.'/ &
1476	' Time averaged over ', F7.1, ' s,' / &
1477	' Profiles for the time averaging are taken every ', &
1478	F6.1,' s')
1479	#endif
1480	400 FORMAT (//' Physical quantities:'/ &
1481	' -------------------'/)
1482	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1483	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1484	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1485	' f* = ',F9.6,' 1/s')
1486	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1487	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1488	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1489	415 FORMAT (/' Cloud physics parameters:'/ &
1490	' ------------------------'/)
1491	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1492	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1493	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1494	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1495	' Vapourization heat : L_v = ',E8.2,' J/kg')
1496	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1497	' Height: ',A,' m'/ &
1498	' Temperature: ',A,' K'/ &
1499	' Gradient: ',A,' K/100m'/ &
1500	' Gridpoint: ',A)
1501	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1502	' Height: ',A,' m'/ &
1503	' Humidity: ',A,' kg/kg'/ &
1504	' Gradient: ',A,' (kg/kg)/100m'/ &
1505	' Gridpoint: ',A)
1506	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1507	' Height: ',A,' m'/ &
1508	' Scalar concentration: ',A,' kg/m**3'/ &
1509	' Gradient: ',A,' (kg/m**3)/100m'/ &
1510	' Gridpoint: ',A)
1511	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1512	' Height: ',A,' m'/ &
1513	' ug: ',A,' m/s'/ &
1514	' Gradient: ',A,' 1/100s'/ &
1515	' Gridpoint: ',A)
1516	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1517	' Height: ',A,' m'/ &
1518	' vg: ',A,' m/s'/ &
1519	' Gradient: ',A,' 1/100s'/ &
1520	' Gridpoint: ',A)
1521	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1522	' Height: ',A,' m'/ &
1523	' Salinity: ',A,' psu'/ &
1524	' Gradient: ',A,' psu/100m'/ &
1525	' Gridpoint: ',A)
1526	450 FORMAT (//' LES / Turbulence quantities:'/ &
1527	' ---------------------------'/)
1528	451 FORMAT (' Diffusion coefficients are constant:'/ &
1529	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1530	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1531	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1532	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1533	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1534	470 FORMAT (//' Actions during the simulation:'/ &
1535	' -----------------------------'/)
1536	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1537	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1538	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1539	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1540	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1541	' to i/j =',I4)
1542	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1543	1X,F5.3, ' m2/s2')
1544	474 FORMAT (' Random number generator used : ',A/)
1545	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1546	'respectively, if'/ &
1547	' the value is negative) by ',F5.2,' K at the beginning of the',&
1548	' 3D-simulation'/)
1549	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1550	'respectively, if the'/ &
1551	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1552	' the 3D-simulation'/)
1553	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1554	'respectively, if the'/ &
1555	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1556	' the 3D-simulation'/)
1557	480 FORMAT (' Particles:'/ &
1558	' ---------'// &
1559	' Particle advection is active (switched on at t = ', F7.1, &
1560	' s)'/ &
1561	' Start of new particle generations every ',F6.1,' s'/ &
1562	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1563	' bottom: ', A, ' top: ', A/&
1564	' Maximum particle age: ',F9.1,' s'/ &
1565	' Advection stopped at t = ',F9.1,' s'/ &
1566	' Particles are sorted every ',F9.1,' s'/)
1567	481 FORMAT (' Particles have random start positions'/)
1568	482 FORMAT (' Particles are advected only horizontally'/)
1569	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1570	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1571	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1572	' Maximum age of the end of the tail: ',F8.2,' s')
1573	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1574	486 FORMAT (' Particle statistics are written on file'/)
1575	487 FORMAT (' Number of particle groups: ',I2/)
1576	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1577	' minimum timestep for advection: ', F7.5/)
1578	489 FORMAT (' Number of particles simultaneously released at each ', &
1579	'point: ', I5/)
1580	490 FORMAT (' Particle group ',I2,':'/ &
1581	' Particle radius: ',E10.3, 'm')
1582	491 FORMAT (' Particle inertia is activated'/ &
1583	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1584	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1585	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1586	' y:',F8.1,' - ',F8.1,' m'/&
1587	' z:',F8.1,' - ',F8.1,' m'/&
1588	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1589	' m dz = ',F8.1,' m'/)
1590	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1591	F8.2,' s'/)
1592	495 FORMAT (' Number of particles in total domain: ',I10/)
1593	500 FORMAT (//' 1D-Model parameters:'/ &
1594	' -------------------'// &
1595	' Simulation time: ',F8.1,' s'/ &
1596	' Run-controll output every: ',F8.1,' s'/ &
1597	' Vertical profile output every: ',F8.1,' s'/ &
1598	' Mixing length calculation: ',A/ &
1599	' Dissipation calculation: ',A/)
1600	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1601
1602
1603	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 143

Download in other formats: