Home

Context Navigation

header.f90 @ 130

Last change on this file since 130 was 130, checked in by letzel, 17 years ago

DVRP output modifications:

The user can now visualize user-defined quantities using dvrp.

data_output_dvrp calls the new user_interface subroutine
user_data_output_dvrp in case of unknown variables (CASE DEFAULT).

Two instead of one digit are allowed to specify isosurface and slicer

variables with the parameter mode_dvrp.

Property svn:keywords set to Id

File size: 59.0 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! allow two instead of one digit to specify isosurface and slicer variables
7	! Output of sorting frequency of particles
8	!
9	! Former revisions:
10	! -----------------
11	! $Id: header.f90 130 2007-11-13 14:08:40Z letzel $
12	!
13	! 108 2007-08-24 15:10:38Z letzel
14	! Output of informations for coupled model runs (boundary conditions etc.)
15	! + output of momentumfluxes at the top boundary
16	! Rayleigh damping for ocean, e_init
17	!
18	! 97 2007-06-21 08:23:15Z raasch
19	! Adjustments for the ocean version.
20	! use_pt_reference renamed use_reference
21	!
22	! 87 2007-05-22 15:46:47Z raasch
23	! Bugfix: output of use_upstream_for_tke
24	!
25	! 82 2007-04-16 15:40:52Z raasch
26	! Preprocessor strings for different linux clusters changed to "lc",
27	! routine local_flush is used for buffer flushing
28	!
29	! 76 2007-03-29 00:58:32Z raasch
30	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
31	! output of the loop optimization method, moisture renamed humidity,
32	! output of subversion revision number
33	!
34	! 19 2007-02-23 04:53:48Z raasch
35	! Output of scalar flux applied at top boundary
36	!
37	! RCS Log replace by Id keyword, revision history cleaned up
38	!
39	! Revision 1.63 2006/08/22 13:53:13 raasch
40	! Output of dz_max
41	!
42	! Revision 1.1 1997/08/11 06:17:20 raasch
43	! Initial revision
44	!
45	!
46	! Description:
47	! ------------
48	! Writing a header with all important informations about the actual run.
49	! This subroutine is called three times, two times at the beginning
50	! (writing information on files RUN_CONTROL and HEADER) and one time at the
51	! end of the run, then writing additional information about CPU-usage on file
52	! header.
53	!------------------------------------------------------------------------------!
54
55	USE arrays_3d
56	USE control_parameters
57	USE cloud_parameters
58	USE cpulog
59	USE dvrp_variables
60	USE grid_variables
61	USE indices
62	USE model_1d
63	USE particle_attributes
64	USE pegrid
65	USE spectrum
66
67	IMPLICIT NONE
68
69	CHARACTER (LEN=1) :: prec
70	CHARACTER (LEN=2) :: do2d_mode
71	CHARACTER (LEN=5) :: section_chr
72	CHARACTER (LEN=9) :: time_to_string
73	CHARACTER (LEN=10) :: coor_chr, host_chr
74	CHARACTER (LEN=16) :: begin_chr
75	CHARACTER (LEN=21) :: ver_rev
76	CHARACTER (LEN=40) :: output_format
77	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
78	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
79	run_classification, slices, temperatures, &
80	ugcomponent, vgcomponent
81	CHARACTER (LEN=85) :: roben, runten
82
83	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
84	REAL :: cpuseconds_per_simulated_second
85
86	!
87	!-- Open the output file. At the end of the simulation, output is directed
88	!-- to unit 19.
89	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
90	.NOT. simulated_time_at_begin /= simulated_time ) THEN
91	io = 15 ! header output on file RUN_CONTROL
92	ELSE
93	io = 19 ! header output on file HEADER
94	ENDIF
95	CALL check_open( io )
96
97	!
98	!-- At the end of the run, output file (HEADER) will be rewritten with
99	!-- new informations
100	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
101
102	!
103	!-- Determine kind of model run
104	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
105	run_classification = '3D - restart run'
106	ELSE
107	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
108	run_classification = '3D - run without 1D - prerun'
109	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
110	run_classification = '3D - run with 1D - prerun'
111	ELSE
112	PRINT*,'+++ header: unknown action(s): ',initializing_actions
113	ENDIF
114	ENDIF
115	IF ( ocean ) THEN
116	run_classification = 'ocean - ' // run_classification
117	ELSE
118	run_classification = 'atmosphere - ' // run_classification
119	ENDIF
120
121	!
122	!-- Run-identification, date, time, host
123	host_chr = host(1:10)
124	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
125	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
126	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
127	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
128	ADJUSTR( host_chr )
129	#if defined( __parallel )
130	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
131	char1 = 'calculated'
132	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
133	host(1:2) == 'lc' ) .AND. &
134	npex == -1 .AND. pdims(2) == 1 ) THEN
135	char1 = 'forced'
136	ELSE
137	char1 = 'predefined'
138	ENDIF
139	IF ( threads_per_task == 1 ) THEN
140	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
141	ELSE
142	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
143	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
144	ENDIF
145	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
146	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
147	npex == -1 .AND. pdims(2) == 1 ) &
148	THEN
149	WRITE ( io, 106 )
150	ELSEIF ( pdims(2) == 1 ) THEN
151	WRITE ( io, 107 ) 'x'
152	ELSEIF ( pdims(1) == 1 ) THEN
153	WRITE ( io, 107 ) 'y'
154	ENDIF
155	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
156	#endif
157	WRITE ( io, 99 )
158
159	!
160	!-- Numerical schemes
161	WRITE ( io, 110 )
162	IF ( psolver(1:7) == 'poisfft' ) THEN
163	WRITE ( io, 111 ) TRIM( fft_method )
164	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
165	ELSEIF ( psolver == 'sor' ) THEN
166	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
167	ELSEIF ( psolver == 'multigrid' ) THEN
168	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
169	IF ( mg_cycles == -1 ) THEN
170	WRITE ( io, 140 ) residual_limit
171	ELSE
172	WRITE ( io, 141 ) mg_cycles
173	ENDIF
174	IF ( mg_switch_to_pe0_level == 0 ) THEN
175	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
176	nzt_mg(1)
177	ELSE
178	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
179	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
180	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
181	nzt_mg(mg_switch_to_pe0_level), &
182	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
183	nzt_mg(1)
184	ENDIF
185	ENDIF
186	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
187	THEN
188	WRITE ( io, 142 )
189	ENDIF
190
191	IF ( momentum_advec == 'pw-scheme' ) THEN
192	WRITE ( io, 113 )
193	ELSE
194	WRITE ( io, 114 )
195	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
196	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
197	overshoot_limit_w /= 0.0 ) THEN
198	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
199	overshoot_limit_w
200	ENDIF
201	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
202	ups_limit_w /= 0.0 ) &
203	THEN
204	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
205	ENDIF
206	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
207	ENDIF
208	IF ( scalar_advec == 'pw-scheme' ) THEN
209	WRITE ( io, 116 )
210	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
211	WRITE ( io, 117 )
212	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
213	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
214	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
215	ENDIF
216	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
217	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
218	ENDIF
219	ELSE
220	WRITE ( io, 118 )
221	ENDIF
222
223	WRITE ( io, 139 ) TRIM( loop_optimization )
224
225	IF ( galilei_transformation ) THEN
226	IF ( use_ug_for_galilei_tr ) THEN
227	char1 = 'geostrophic wind'
228	ELSE
229	char1 = 'mean wind in model domain'
230	ENDIF
231	IF ( simulated_time_at_begin == simulated_time ) THEN
232	char2 = 'at the start of the run'
233	ELSE
234	char2 = 'at the end of the run'
235	ENDIF
236	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
237	advected_distance_x/1000.0, advected_distance_y/1000.0
238	ENDIF
239	IF ( timestep_scheme == 'leapfrog' ) THEN
240	WRITE ( io, 120 )
241	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
242	WRITE ( io, 121 )
243	ELSE
244	WRITE ( io, 122 ) timestep_scheme
245	ENDIF
246	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
247	IF ( rayleigh_damping_factor /= 0.0 ) THEN
248	IF ( .NOT. ocean ) THEN
249	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
250	rayleigh_damping_factor
251	ELSE
252	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
253	rayleigh_damping_factor
254	ENDIF
255	ENDIF
256	IF ( humidity ) THEN
257	IF ( .NOT. cloud_physics ) THEN
258	WRITE ( io, 129 )
259	ELSE
260	WRITE ( io, 130 )
261	WRITE ( io, 131 )
262	IF ( radiation ) WRITE ( io, 132 )
263	IF ( precipitation ) WRITE ( io, 133 )
264	ENDIF
265	ENDIF
266	IF ( passive_scalar ) WRITE ( io, 134 )
267	IF ( conserve_volume_flow ) WRITE ( io, 150 )
268	WRITE ( io, 99 )
269
270	!
271	!-- Runtime and timestep informations
272	WRITE ( io, 200 )
273	IF ( .NOT. dt_fixed ) THEN
274	WRITE ( io, 201 ) dt_max, cfl_factor
275	ELSE
276	WRITE ( io, 202 ) dt
277	ENDIF
278	WRITE ( io, 203 ) simulated_time_at_begin, end_time
279
280	IF ( time_restart /= 9999999.9 .AND. &
281	simulated_time_at_begin == simulated_time ) THEN
282	IF ( dt_restart == 9999999.9 ) THEN
283	WRITE ( io, 204 ) ' Restart at: ',time_restart
284	ELSE
285	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
286	ENDIF
287	ENDIF
288
289	IF ( simulated_time_at_begin /= simulated_time ) THEN
290	i = MAX ( log_point_s(10)%counts, 1 )
291	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
292	cpuseconds_per_simulated_second = 0.0
293	ELSE
294	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
295	( simulated_time - &
296	simulated_time_at_begin )
297	ENDIF
298	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
299	log_point_s(10)%sum / REAL( i ), &
300	cpuseconds_per_simulated_second
301	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
302	IF ( dt_restart == 9999999.9 ) THEN
303	WRITE ( io, 204 ) ' Next restart at: ',time_restart
304	ELSE
305	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
306	ENDIF
307	ENDIF
308	ENDIF
309
310	!
311	!-- Computational grid
312	IF ( .NOT. ocean ) THEN
313	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
314	IF ( dz_stretch_level_index < nzt+1 ) THEN
315	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
316	dz_stretch_factor, dz_max
317	ENDIF
318	ELSE
319	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
320	IF ( dz_stretch_level_index > 0 ) THEN
321	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
322	dz_stretch_factor, dz_max
323	ENDIF
324	ENDIF
325	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
326	MIN( nnz+2, nzt+2 )
327	IF ( numprocs > 1 ) THEN
328	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
329	WRITE ( io, 255 )
330	ELSE
331	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
332	ENDIF
333	ENDIF
334	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
335
336	!
337	!-- Topography
338	WRITE ( io, 270 ) topography
339	SELECT CASE ( TRIM( topography ) )
340
341	CASE ( 'flat' )
342	! no actions necessary
343
344	CASE ( 'single_building' )
345	blx = INT( building_length_x / dx )
346	bly = INT( building_length_y / dy )
347	bh = INT( building_height / dz )
348
349	IF ( building_wall_left == 9999999.9 ) THEN
350	building_wall_left = ( nx + 1 - blx ) / 2 * dx
351	ENDIF
352	bxl = INT ( building_wall_left / dx + 0.5 )
353	bxr = bxl + blx
354
355	IF ( building_wall_south == 9999999.9 ) THEN
356	building_wall_south = ( ny + 1 - bly ) / 2 * dy
357	ENDIF
358	bys = INT ( building_wall_south / dy + 0.5 )
359	byn = bys + bly
360
361	WRITE ( io, 271 ) building_length_x, building_length_y, &
362	building_height, bxl, bxr, bys, byn
363
364	END SELECT
365
366	!
367	!-- Boundary conditions
368	IF ( ibc_p_b == 0 ) THEN
369	runten = 'p(0) = 0 \|'
370	ELSEIF ( ibc_p_b == 1 ) THEN
371	runten = 'p(0) = p(1) \|'
372	ELSE
373	runten = 'p(0) = p(1) +R\|'
374	ENDIF
375	IF ( ibc_p_t == 0 ) THEN
376	roben = 'p(nzt+1) = 0 \|'
377	ELSE
378	roben = 'p(nzt+1) = p(nzt) \|'
379	ENDIF
380
381	IF ( ibc_uv_b == 0 ) THEN
382	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
383	ELSE
384	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
385	ENDIF
386	IF ( ibc_uv_t == 0 ) THEN
387	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
388	ELSE
389	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
390	ENDIF
391
392	IF ( ibc_pt_b == 0 ) THEN
393	runten = TRIM( runten ) // ' pt(0) = pt_surface'
394	ELSEIF ( ibc_pt_b == 1 ) THEN
395	runten = TRIM( runten ) // ' pt(0) = pt(1)'
396	ELSEIF ( ibc_pt_b == 2 ) THEN
397	runten = TRIM( runten ) // ' pt(0) = from coupled model'
398	ENDIF
399	IF ( ibc_pt_t == 0 ) THEN
400	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
401	ELSEIF( ibc_pt_t == 1 ) THEN
402	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
403	ELSEIF( ibc_pt_t == 2 ) THEN
404	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
405	ENDIF
406
407	WRITE ( io, 300 ) runten, roben
408
409	IF ( .NOT. constant_diffusion ) THEN
410	IF ( ibc_e_b == 1 ) THEN
411	runten = 'e(0) = e(1)'
412	ELSE
413	runten = 'e(0) = e(1) = (u/0.1)*2'
414	ENDIF
415	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
416
417	WRITE ( io, 301 ) 'e', runten, roben
418
419	ENDIF
420
421	IF ( ocean ) THEN
422	runten = 'sa(0) = sa(1)'
423	IF ( ibc_sa_t == 0 ) THEN
424	roben = 'sa(nzt+1) = sa_surface'
425	ELSE
426	roben = 'sa(nzt+1) = sa(nzt)'
427	ENDIF
428	WRITE ( io, 301 ) 'sa', runten, roben
429	ENDIF
430
431	IF ( humidity ) THEN
432	IF ( ibc_q_b == 0 ) THEN
433	runten = 'q(0) = q_surface'
434	ELSE
435	runten = 'q(0) = q(1)'
436	ENDIF
437	IF ( ibc_q_t == 0 ) THEN
438	roben = 'q(nzt) = q_top'
439	ELSE
440	roben = 'q(nzt) = q(nzt-1) + dq/dz'
441	ENDIF
442	WRITE ( io, 301 ) 'q', runten, roben
443	ENDIF
444
445	IF ( passive_scalar ) THEN
446	IF ( ibc_q_b == 0 ) THEN
447	runten = 's(0) = s_surface'
448	ELSE
449	runten = 's(0) = s(1)'
450	ENDIF
451	IF ( ibc_q_t == 0 ) THEN
452	roben = 's(nzt) = s_top'
453	ELSE
454	roben = 's(nzt) = s(nzt-1) + ds/dz'
455	ENDIF
456	WRITE ( io, 301 ) 's', runten, roben
457	ENDIF
458
459	IF ( use_surface_fluxes ) THEN
460	WRITE ( io, 303 )
461	IF ( constant_heatflux ) THEN
462	WRITE ( io, 306 ) surface_heatflux
463	IF ( random_heatflux ) WRITE ( io, 307 )
464	ENDIF
465	IF ( humidity .AND. constant_waterflux ) THEN
466	WRITE ( io, 311 ) surface_waterflux
467	ENDIF
468	IF ( passive_scalar .AND. constant_waterflux ) THEN
469	WRITE ( io, 313 ) surface_waterflux
470	ENDIF
471	ENDIF
472
473	IF ( use_top_fluxes ) THEN
474	WRITE ( io, 304 )
475	IF ( coupling_mode == 'uncoupled' ) THEN
476	WRITE ( io, 319 ) top_momentumflux_u, top_momentumflux_v
477	IF ( constant_top_heatflux ) THEN
478	WRITE ( io, 306 ) top_heatflux
479	ENDIF
480	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
481	WRITE ( io, 316 )
482	ENDIF
483	IF ( ocean .AND. constant_top_salinityflux ) THEN
484	WRITE ( io, 309 ) top_salinityflux
485	ENDIF
486	IF ( humidity .OR. passive_scalar ) THEN
487	WRITE ( io, 315 )
488	ENDIF
489	ENDIF
490
491	IF ( prandtl_layer ) THEN
492	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
493	rif_min, rif_max
494	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
495	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
496	WRITE ( io, 312 )
497	ENDIF
498	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
499	WRITE ( io, 314 )
500	ENDIF
501	ELSE
502	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
503	WRITE ( io, 310 ) rif_min, rif_max
504	ENDIF
505	ENDIF
506
507	WRITE ( io, 317 ) bc_lr, bc_ns
508	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
509	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
510	ENDIF
511
512	!
513	!-- Listing of 1D-profiles
514	WRITE ( io, 320 ) dt_dopr_listing
515	IF ( averaging_interval_pr /= 0.0 ) THEN
516	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
517	ENDIF
518
519	!
520	!-- DATA output
521	WRITE ( io, 330 )
522	IF ( averaging_interval_pr /= 0.0 ) THEN
523	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
524	ENDIF
525
526	!
527	!-- 1D-profiles
528	dopr_chr = 'Profile:'
529	IF ( dopr_n /= 0 ) THEN
530	WRITE ( io, 331 )
531
532	output_format = ''
533	IF ( netcdf_output ) THEN
534	IF ( netcdf_64bit ) THEN
535	output_format = 'netcdf (64 bit offset)'
536	ELSE
537	output_format = 'netcdf'
538	ENDIF
539	ENDIF
540	IF ( profil_output ) THEN
541	IF ( netcdf_output ) THEN
542	output_format = TRIM( output_format ) // ' and profil'
543	ELSE
544	output_format = 'profil'
545	ENDIF
546	ENDIF
547	WRITE ( io, 345 ) output_format
548
549	DO i = 1, dopr_n
550	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
551	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
552	WRITE ( io, 332 ) dopr_chr
553	dopr_chr = ' :'
554	ENDIF
555	ENDDO
556
557	IF ( dopr_chr /= '' ) THEN
558	WRITE ( io, 332 ) dopr_chr
559	ENDIF
560	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
561	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
562	ENDIF
563
564	!
565	!-- 2D-arrays
566	DO av = 0, 1
567
568	i = 1
569	do2d_xy = ''
570	do2d_xz = ''
571	do2d_yz = ''
572	DO WHILE ( do2d(av,i) /= ' ' )
573
574	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
575	do2d_mode = do2d(av,i)(l-1:l)
576
577	SELECT CASE ( do2d_mode )
578	CASE ( 'xy' )
579	ll = LEN_TRIM( do2d_xy )
580	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
581	CASE ( 'xz' )
582	ll = LEN_TRIM( do2d_xz )
583	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
584	CASE ( 'yz' )
585	ll = LEN_TRIM( do2d_yz )
586	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
587	END SELECT
588
589	i = i + 1
590
591	ENDDO
592
593	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
594	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
595	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
596	( netcdf_output .OR. iso2d_output ) ) THEN
597
598	IF ( av == 0 ) THEN
599	WRITE ( io, 334 ) ''
600	ELSE
601	WRITE ( io, 334 ) '(time-averaged)'
602	ENDIF
603
604	IF ( do2d_at_begin ) THEN
605	begin_chr = 'and at the start'
606	ELSE
607	begin_chr = ''
608	ENDIF
609
610	output_format = ''
611	IF ( netcdf_output ) THEN
612	IF ( netcdf_64bit ) THEN
613	output_format = 'netcdf (64 bit offset)'
614	ELSE
615	output_format = 'netcdf'
616	ENDIF
617	ENDIF
618	IF ( iso2d_output ) THEN
619	IF ( netcdf_output ) THEN
620	output_format = TRIM( output_format ) // ' and iso2d'
621	ELSE
622	output_format = 'iso2d'
623	ENDIF
624	ENDIF
625	WRITE ( io, 345 ) output_format
626
627	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
628	i = 1
629	slices = '/'
630	coordinates = '/'
631	!
632	!-- Building strings with index and coordinate informations of the
633	!-- slices
634	DO WHILE ( section(i,1) /= -9999 )
635
636	WRITE (section_chr,'(I5)') section(i,1)
637	section_chr = ADJUSTL( section_chr )
638	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
639
640	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
641	coor_chr = ADJUSTL( coor_chr )
642	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
643
644	i = i + 1
645	ENDDO
646	IF ( av == 0 ) THEN
647	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
648	TRIM( begin_chr ), 'k', TRIM( slices ), &
649	TRIM( coordinates )
650	IF ( skip_time_do2d_xy /= 0.0 ) THEN
651	WRITE ( io, 339 ) skip_time_do2d_xy
652	ENDIF
653	ELSE
654	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
655	TRIM( begin_chr ), averaging_interval, &
656	dt_averaging_input, 'k', TRIM( slices ), &
657	TRIM( coordinates )
658	IF ( skip_time_data_output_av /= 0.0 ) THEN
659	WRITE ( io, 339 ) skip_time_data_output_av
660	ENDIF
661	ENDIF
662
663	ENDIF
664
665	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
666	i = 1
667	slices = '/'
668	coordinates = '/'
669	!
670	!-- Building strings with index and coordinate informations of the
671	!-- slices
672	DO WHILE ( section(i,2) /= -9999 )
673
674	WRITE (section_chr,'(I5)') section(i,2)
675	section_chr = ADJUSTL( section_chr )
676	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
677
678	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
679	coor_chr = ADJUSTL( coor_chr )
680	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
681
682	i = i + 1
683	ENDDO
684	IF ( av == 0 ) THEN
685	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
686	TRIM( begin_chr ), 'j', TRIM( slices ), &
687	TRIM( coordinates )
688	IF ( skip_time_do2d_xz /= 0.0 ) THEN
689	WRITE ( io, 339 ) skip_time_do2d_xz
690	ENDIF
691	ELSE
692	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
693	TRIM( begin_chr ), averaging_interval, &
694	dt_averaging_input, 'j', TRIM( slices ), &
695	TRIM( coordinates )
696	IF ( skip_time_data_output_av /= 0.0 ) THEN
697	WRITE ( io, 339 ) skip_time_data_output_av
698	ENDIF
699	ENDIF
700	ENDIF
701
702	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
703	i = 1
704	slices = '/'
705	coordinates = '/'
706	!
707	!-- Building strings with index and coordinate informations of the
708	!-- slices
709	DO WHILE ( section(i,3) /= -9999 )
710
711	WRITE (section_chr,'(I5)') section(i,3)
712	section_chr = ADJUSTL( section_chr )
713	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
714
715	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
716	coor_chr = ADJUSTL( coor_chr )
717	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
718
719	i = i + 1
720	ENDDO
721	IF ( av == 0 ) THEN
722	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
723	TRIM( begin_chr ), 'i', TRIM( slices ), &
724	TRIM( coordinates )
725	IF ( skip_time_do2d_yz /= 0.0 ) THEN
726	WRITE ( io, 339 ) skip_time_do2d_yz
727	ENDIF
728	ELSE
729	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
730	TRIM( begin_chr ), averaging_interval, &
731	dt_averaging_input, 'i', TRIM( slices ), &
732	TRIM( coordinates )
733	IF ( skip_time_data_output_av /= 0.0 ) THEN
734	WRITE ( io, 339 ) skip_time_data_output_av
735	ENDIF
736	ENDIF
737	ENDIF
738
739	ENDIF
740
741	ENDDO
742
743	!
744	!-- 3d-arrays
745	DO av = 0, 1
746
747	i = 1
748	do3d_chr = ''
749	DO WHILE ( do3d(av,i) /= ' ' )
750
751	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
752	i = i + 1
753
754	ENDDO
755
756	IF ( do3d_chr /= '' ) THEN
757	IF ( av == 0 ) THEN
758	WRITE ( io, 336 ) ''
759	ELSE
760	WRITE ( io, 336 ) '(time-averaged)'
761	ENDIF
762
763	output_format = ''
764	IF ( netcdf_output ) THEN
765	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
766	output_format = 'netcdf (64 bit offset)'
767	ELSE
768	output_format = 'netcdf'
769	ENDIF
770	ENDIF
771	IF ( avs_output ) THEN
772	IF ( netcdf_output ) THEN
773	output_format = TRIM( output_format ) // ' and avs'
774	ELSE
775	output_format = 'avs'
776	ENDIF
777	ENDIF
778	WRITE ( io, 345 ) output_format
779
780	IF ( do3d_at_begin ) THEN
781	begin_chr = 'and at the start'
782	ELSE
783	begin_chr = ''
784	ENDIF
785	IF ( av == 0 ) THEN
786	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
787	zu(nz_do3d), nz_do3d
788	ELSE
789	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
790	TRIM( begin_chr ), averaging_interval, &
791	dt_averaging_input, zu(nz_do3d), nz_do3d
792	ENDIF
793
794	IF ( do3d_compress ) THEN
795	do3d_chr = ''
796	i = 1
797	DO WHILE ( do3d(av,i) /= ' ' )
798
799	SELECT CASE ( do3d(av,i) )
800	CASE ( 'u' )
801	j = 1
802	CASE ( 'v' )
803	j = 2
804	CASE ( 'w' )
805	j = 3
806	CASE ( 'p' )
807	j = 4
808	CASE ( 'pt' )
809	j = 5
810	END SELECT
811	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
812	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
813	':' // prec // ','
814	i = i + 1
815
816	ENDDO
817	WRITE ( io, 338 ) do3d_chr
818
819	ENDIF
820
821	IF ( av == 0 ) THEN
822	IF ( skip_time_do3d /= 0.0 ) THEN
823	WRITE ( io, 339 ) skip_time_do3d
824	ENDIF
825	ELSE
826	IF ( skip_time_data_output_av /= 0.0 ) THEN
827	WRITE ( io, 339 ) skip_time_data_output_av
828	ENDIF
829	ENDIF
830
831	ENDIF
832
833	ENDDO
834
835	!
836	!-- Timeseries
837	IF ( dt_dots /= 9999999.9 ) THEN
838	WRITE ( io, 340 )
839
840	output_format = ''
841	IF ( netcdf_output ) THEN
842	IF ( netcdf_64bit ) THEN
843	output_format = 'netcdf (64 bit offset)'
844	ELSE
845	output_format = 'netcdf'
846	ENDIF
847	ENDIF
848	IF ( profil_output ) THEN
849	IF ( netcdf_output ) THEN
850	output_format = TRIM( output_format ) // ' and profil'
851	ELSE
852	output_format = 'profil'
853	ENDIF
854	ENDIF
855	WRITE ( io, 345 ) output_format
856	WRITE ( io, 341 ) dt_dots
857	ENDIF
858
859	#if defined( __dvrp_graphics )
860	!
861	!-- Dvrp-output
862	IF ( dt_dvrp /= 9999999.9 ) THEN
863	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
864	TRIM( dvrp_username ), TRIM( dvrp_directory )
865	i = 1
866	l = 0
867	DO WHILE ( mode_dvrp(i) /= ' ' )
868	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
869	READ ( mode_dvrp(i), '(10X,I2)' ) j
870	l = l + 1
871	IF ( do3d(0,j) /= ' ' ) THEN
872	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
873	ENDIF
874	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
875	READ ( mode_dvrp(i), '(6X,I2)' ) j
876	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
877	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
878	WRITE ( io, 363 )
879	ENDIF
880	i = i + 1
881	ENDDO
882	ENDIF
883	#endif
884
885	#if defined( __spectra )
886	!
887	!-- Spectra output
888	IF ( dt_dosp /= 9999999.9 ) THEN
889	WRITE ( io, 370 )
890
891	output_format = ''
892	IF ( netcdf_output ) THEN
893	IF ( netcdf_64bit ) THEN
894	output_format = 'netcdf (64 bit offset)'
895	ELSE
896	output_format = 'netcdf'
897	ENDIF
898	ENDIF
899	IF ( profil_output ) THEN
900	IF ( netcdf_output ) THEN
901	output_format = TRIM( output_format ) // ' and profil'
902	ELSE
903	output_format = 'profil'
904	ENDIF
905	ENDIF
906	WRITE ( io, 345 ) output_format
907	WRITE ( io, 371 ) dt_dosp
908	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
909	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
910	( spectra_direction(i), i = 1,10 ), &
911	( comp_spectra_level(i), i = 1,10 ), &
912	( plot_spectra_level(i), i = 1,10 ), &
913	averaging_interval_sp, dt_averaging_input_pr
914	ENDIF
915	#endif
916
917	WRITE ( io, 99 )
918
919	!
920	!-- Physical quantities
921	WRITE ( io, 400 )
922
923	!
924	!-- Geostrophic parameters
925	WRITE ( io, 410 ) omega, phi, f, fs
926
927	!
928	!-- Other quantities
929	WRITE ( io, 411 ) g
930	IF ( use_reference ) THEN
931	IF ( ocean ) THEN
932	WRITE ( io, 412 ) prho_reference
933	ELSE
934	WRITE ( io, 413 ) pt_reference
935	ENDIF
936	ENDIF
937
938	!
939	!-- Cloud physics parameters
940	IF ( cloud_physics ) THEN
941	WRITE ( io, 415 )
942	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
943	ENDIF
944
945	!-- Profile of the geostrophic wind (component ug)
946	!-- Building output strings
947	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
948	gradients = '------'
949	slices = ' 0'
950	coordinates = ' 0.0'
951	i = 1
952	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
953
954	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
955	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
956
957	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
958	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
959
960	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
961	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
962
963	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
964	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
965
966	i = i + 1
967	ENDDO
968
969	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
970	TRIM( gradients ), TRIM( slices )
971
972	!-- Profile of the geostrophic wind (component vg)
973	!-- Building output strings
974	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
975	gradients = '------'
976	slices = ' 0'
977	coordinates = ' 0.0'
978	i = 1
979	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
980
981	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
982	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
983
984	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
985	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
986
987	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
988	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
989
990	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
991	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
992
993	i = i + 1
994	ENDDO
995
996	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
997	TRIM( gradients ), TRIM( slices )
998
999	!
1000	!-- Initial temperature profile
1001	!-- Building output strings, starting with surface temperature
1002	WRITE ( temperatures, '(F6.2)' ) pt_surface
1003	gradients = '------'
1004	slices = ' 0'
1005	coordinates = ' 0.0'
1006	i = 1
1007	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1008
1009	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1010	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1011
1012	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1013	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1014
1015	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1016	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1017
1018	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1019	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1020
1021	i = i + 1
1022	ENDDO
1023
1024	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1025	TRIM( gradients ), TRIM( slices )
1026
1027	!
1028	!-- Initial humidity profile
1029	!-- Building output strings, starting with surface humidity
1030	IF ( humidity .OR. passive_scalar ) THEN
1031	WRITE ( temperatures, '(E8.1)' ) q_surface
1032	gradients = '--------'
1033	slices = ' 0'
1034	coordinates = ' 0.0'
1035	i = 1
1036	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1037
1038	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1039	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1040
1041	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1042	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1043
1044	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1045	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1046
1047	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1048	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1049
1050	i = i + 1
1051	ENDDO
1052
1053	IF ( humidity ) THEN
1054	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1055	TRIM( gradients ), TRIM( slices )
1056	ELSE
1057	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1058	TRIM( gradients ), TRIM( slices )
1059	ENDIF
1060	ENDIF
1061
1062	!
1063	!-- Initial salinity profile
1064	!-- Building output strings, starting with surface salinity
1065	IF ( ocean ) THEN
1066	WRITE ( temperatures, '(F6.2)' ) sa_surface
1067	gradients = '------'
1068	slices = ' 0'
1069	coordinates = ' 0.0'
1070	i = 1
1071	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1072
1073	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1074	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1075
1076	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1077	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1078
1079	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1080	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1081
1082	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1083	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1084
1085	i = i + 1
1086	ENDDO
1087
1088	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1089	TRIM( gradients ), TRIM( slices )
1090	ENDIF
1091
1092	!
1093	!-- LES / turbulence parameters
1094	WRITE ( io, 450 )
1095
1096	!--
1097	! ... LES-constants used must still be added here
1098	!--
1099	IF ( constant_diffusion ) THEN
1100	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1101	prandtl_number
1102	ENDIF
1103	IF ( .NOT. constant_diffusion) THEN
1104	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1105	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1106	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1107	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1108	ENDIF
1109
1110	!
1111	!-- Special actions during the run
1112	WRITE ( io, 470 )
1113	IF ( create_disturbances ) THEN
1114	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1115	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1116	zu(disturbance_level_ind_t), disturbance_level_ind_t
1117	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1118	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1119	ELSE
1120	WRITE ( io, 473 ) disturbance_energy_limit
1121	ENDIF
1122	WRITE ( io, 474 ) TRIM( random_generator )
1123	ENDIF
1124	IF ( pt_surface_initial_change /= 0.0 ) THEN
1125	WRITE ( io, 475 ) pt_surface_initial_change
1126	ENDIF
1127	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1128	WRITE ( io, 476 ) q_surface_initial_change
1129	ENDIF
1130	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1131	WRITE ( io, 477 ) q_surface_initial_change
1132	ENDIF
1133
1134	IF ( particle_advection ) THEN
1135	!
1136	!-- Particle attributes
1137	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1138	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1139	end_time_prel, dt_sort_particles
1140	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1141	IF ( random_start_position ) WRITE ( io, 481 )
1142	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1143	WRITE ( io, 495 ) total_number_of_particles
1144	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1145	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1146	WRITE ( io, 483 ) maximum_number_of_tailpoints
1147	IF ( minimum_tailpoint_distance /= 0 ) THEN
1148	WRITE ( io, 484 ) total_number_of_tails, &
1149	minimum_tailpoint_distance, &
1150	maximum_tailpoint_age
1151	ENDIF
1152	ENDIF
1153	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1154	WRITE ( io, 485 ) dt_write_particle_data
1155	output_format = ''
1156	IF ( netcdf_output ) THEN
1157	IF ( netcdf_64bit ) THEN
1158	output_format = 'netcdf (64 bit offset) and binary'
1159	ELSE
1160	output_format = 'netcdf and binary'
1161	ENDIF
1162	ELSE
1163	output_format = 'binary'
1164	ENDIF
1165	WRITE ( io, 345 ) output_format
1166	ENDIF
1167	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1168	IF ( write_particle_statistics ) WRITE ( io, 486 )
1169
1170	WRITE ( io, 487 ) number_of_particle_groups
1171
1172	DO i = 1, number_of_particle_groups
1173	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1174	WRITE ( io, 490 ) i, 0.0
1175	WRITE ( io, 492 )
1176	ELSE
1177	WRITE ( io, 490 ) i, radius(i)
1178	IF ( density_ratio(i) /= 0.0 ) THEN
1179	WRITE ( io, 491 ) density_ratio(i)
1180	ELSE
1181	WRITE ( io, 492 )
1182	ENDIF
1183	ENDIF
1184	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1185	pdx(i), pdy(i), pdz(i)
1186	ENDDO
1187
1188	ENDIF
1189
1190
1191	!
1192	!-- Parameters of 1D-model
1193	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1194	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1195	mixing_length_1d, dissipation_1d
1196	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1197	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1198	ENDIF
1199	ENDIF
1200
1201	!
1202	!-- User-defined informations
1203	CALL user_header( io )
1204
1205	WRITE ( io, 99 )
1206
1207	!
1208	!-- Write buffer contents to disc immediately
1209	CALL local_flush( io )
1210
1211	!
1212	!-- Here the FORMATs start
1213
1214	99 FORMAT (1X,78('-'))
1215	100 FORMAT (/1X,'*************************',11X,42('-')/ &
1216	1X,'* ',A,' *',11X,A/ &
1217	1X,'*************************',11X,42('-'))
1218	101 FORMAT (37X,'coupled run: ',A/ &
1219	37X,42('-'))
1220	102 FORMAT (/' Date: ',A8,11X,'Run: ',A20/ &
1221	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1222	' Run on host: ',A10)
1223	#if defined( __parallel )
1224	103 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1225	')',1X,A)
1226	104 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1227	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1228	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1229	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1230	37X,'because the job is running on an SMP-cluster')
1231	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1232	#endif
1233	110 FORMAT (/' Numerical Schemes:'/ &
1234	' -----------------'/)
1235	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1236	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1237	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1238	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1239	' or Upstream')
1240	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1241	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1242	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1243	' or Upstream')
1244	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1245	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1246	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1247	' Translation velocity = ',A/ &
1248	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1249	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1250	' of timestep changes)')
1251	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1252	' timestep changes')
1253	122 FORMAT (' --> Time differencing scheme: ',A)
1254	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1255	' maximum damping coefficient: ',F5.3, ' 1/s')
1256	124 FORMAT (' Spline-overshoots are being suppressed')
1257	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1258	' of'/ &
1259	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1260	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1261	' of'/ &
1262	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1263	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1264	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1265	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1266	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1267	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1268	130 FORMAT (' --> Additional prognostic equation for the total water content')
1269	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1270	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1271	' effective emissivity scheme')
1272	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1273	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1274	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1275	A,'-cycle)'/ &
1276	' number of grid levels: ',I2/ &
1277	' Gauss-Seidel red/black iterations: ',I2)
1278	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1279	I3,')')
1280	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1281	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1282	I3,')'/ &
1283	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1284	I3,')')
1285	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1286	139 FORMAT (' --> Loop optimization method: ',A)
1287	140 FORMAT (' maximum residual allowed: ',E10.3)
1288	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1289	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1290	'step')
1291	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1292	'kinetic energy')
1293	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1294	'conserved')
1295	200 FORMAT (//' Run time and time step information:'/ &
1296	' ----------------------------------'/)
1297	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1298	' CFL-factor: ',F4.2)
1299	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1300	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1301	' End time: ',F9.3,' s')
1302	204 FORMAT ( A,F9.3,' s')
1303	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1304	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1305	' CPU-time used: ',F9.3,' s per timestep: ', &
1306	' ',F9.3,' s'/ &
1307	' per second of simulated tim', &
1308	'e: ',F9.3,' s')
1309	250 FORMAT (//' Computational grid and domain size:'/ &
1310	' ----------------------------------'// &
1311	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1312	' m dz = ',F7.3,' m'/ &
1313	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1314	' m z(u) = ',F10.3,' m'/)
1315	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1316	' factor: ',F5.3/ &
1317	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1318	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1319	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1320	255 FORMAT (' Subdomains have equal size')
1321	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1322	'have smaller sizes'/ &
1323	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1324	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1325	' degrees')
1326	270 FORMAT (//' Topography informations:'/ &
1327	' -----------------------'// &
1328	1X,'Topography: ',A)
1329	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1330	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1331	' / ',I4)
1332	300 FORMAT (//' Boundary conditions:'/ &
1333	' -------------------'// &
1334	' p uv ', &
1335	' pt'// &
1336	' B. bound.: ',A/ &
1337	' T. bound.: ',A)
1338	301 FORMAT (/' ',A// &
1339	' B. bound.: ',A/ &
1340	' T. bound.: ',A)
1341	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1342	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1343	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1344	'computational u,v-level:'// &
1345	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1346	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1347	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1348	307 FORMAT (' Heatflux has a random normal distribution')
1349	308 FORMAT (' Predefined surface temperature')
1350	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1351	310 FORMAT (//' 1D-Model:'// &
1352	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1353	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1354	312 FORMAT (' Predefined surface humidity')
1355	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1356	314 FORMAT (' Predefined scalar value at the surface')
1357	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1358	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1359	'atmosphere model')
1360	317 FORMAT (//' Lateral boundaries:'/ &
1361	' left/right: ',A/ &
1362	' north/south: ',A)
1363	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1364	'max =',F5.1,' m**2/s')
1365	319 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1366	' v: ',F9.6,' m2/s2')
1367	320 FORMAT (//' List output:'/ &
1368	' -----------'// &
1369	' 1D-Profiles:'/ &
1370	' Output every ',F8.2,' s')
1371	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
1372	' Averaging input every ',F8.2,' s')
1373	330 FORMAT (//' Data output:'/ &
1374	' -----------'/)
1375	331 FORMAT (/' 1D-Profiles:')
1376	332 FORMAT (/' ',A)
1377	333 FORMAT (' Output every ',F8.2,' s',/ &
1378	' Time averaged over ',F8.2,' s'/ &
1379	' Averaging input every ',F8.2,' s')
1380	334 FORMAT (/' 2D-Arrays',A,':')
1381	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1382	' Output every ',F8.2,' s ',A/ &
1383	' Cross sections at ',A1,' = ',A/ &
1384	' scalar-coordinates: ',A,' m'/)
1385	336 FORMAT (/' 3D-Arrays',A,':')
1386	337 FORMAT (/' Arrays: ',A/ &
1387	' Output every ',F8.2,' s ',A/ &
1388	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1389	338 FORMAT (' Compressed data output'/ &
1390	' Decimal precision: ',A/)
1391	339 FORMAT (' No output during initial ',F8.2,' s')
1392	340 FORMAT (/' Time series:')
1393	341 FORMAT (' Output every ',F8.2,' s'/)
1394	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1395	' Output every ',F8.2,' s ',A/ &
1396	' Time averaged over ',F8.2,' s'/ &
1397	' Averaging input every ',F8.2,' s'/ &
1398	' Cross sections at ',A1,' = ',A/ &
1399	' scalar-coordinates: ',A,' m'/)
1400	343 FORMAT (/' Arrays: ',A/ &
1401	' Output every ',F8.2,' s ',A/ &
1402	' Time averaged over ',F8.2,' s'/ &
1403	' Averaging input every ',F8.2,' s'/ &
1404	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1405	345 FORMAT (' Output format: ',A/)
1406	#if defined( __dvrp_graphics )
1407	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1408	' Output every ',F7.1,' s'/ &
1409	' Output mode: ',A/ &
1410	' Host / User: ',A,' / ',A/ &
1411	' Directory: ',A// &
1412	' The sequence contains:')
1413	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1414	362 FORMAT (' Sectional plane ',A)
1415	363 FORMAT (' Particles')
1416	#endif
1417	#if defined( __spectra )
1418	370 FORMAT (' Spectra:')
1419	371 FORMAT (' Output every ',F7.1,' s'/)
1420	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1421	' Directions: ', 10(A5,',')/ &
1422	' height levels k = ', 9(I3,','),I3,'.'/ &
1423	' height levels selected for standard plot:'/ &
1424	' k = ', 9(I3,','),I3,'.'/ &
1425	' Time averaged over ', F7.1, ' s,' / &
1426	' Profiles for the time averaging are taken every ', &
1427	F6.1,' s')
1428	#endif
1429	400 FORMAT (//' Physical quantities:'/ &
1430	' -------------------'/)
1431	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1432	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1433	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1434	' f* = ',F9.6,' 1/s')
1435	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1436	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1437	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1438	415 FORMAT (/' Cloud physics parameters:'/ &
1439	' ------------------------'/)
1440	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1441	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1442	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1443	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1444	' Vapourization heat : L_v = ',E8.2,' J/kg')
1445	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1446	' Height: ',A,' m'/ &
1447	' Temperature: ',A,' K'/ &
1448	' Gradient: ',A,' K/100m'/ &
1449	' Gridpoint: ',A)
1450	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1451	' Height: ',A,' m'/ &
1452	' Humidity: ',A,' kg/kg'/ &
1453	' Gradient: ',A,' (kg/kg)/100m'/ &
1454	' Gridpoint: ',A)
1455	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1456	' Height: ',A,' m'/ &
1457	' Scalar concentration: ',A,' kg/m**3'/ &
1458	' Gradient: ',A,' (kg/m**3)/100m'/ &
1459	' Gridpoint: ',A)
1460	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1461	' Height: ',A,' m'/ &
1462	' ug: ',A,' m/s'/ &
1463	' Gradient: ',A,' 1/100s'/ &
1464	' Gridpoint: ',A)
1465	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1466	' Height: ',A,' m'/ &
1467	' vg: ',A,' m/s'/ &
1468	' Gradient: ',A,' 1/100s'/ &
1469	' Gridpoint: ',A)
1470	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1471	' Height: ',A,' m'/ &
1472	' Salinity: ',A,' psu'/ &
1473	' Gradient: ',A,' psu/100m'/ &
1474	' Gridpoint: ',A)
1475	450 FORMAT (//' LES / Turbulence quantities:'/ &
1476	' ---------------------------'/)
1477	451 FORMAT (' Diffusion coefficients are constant:'/ &
1478	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1479	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1480	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1481	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1482	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1483	470 FORMAT (//' Actions during the simulation:'/ &
1484	' -----------------------------'/)
1485	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1486	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1487	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1488	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1489	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1490	' to i/j =',I4)
1491	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1492	1X,F5.3, ' m2/s2')
1493	474 FORMAT (' Random number generator used : ',A/)
1494	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1495	'respectively, if'/ &
1496	' the value is negative) by ',F5.2,' K at the beginning of the',&
1497	' 3D-simulation'/)
1498	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1499	'respectively, if the'/ &
1500	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1501	' the 3D-simulation'/)
1502	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1503	'respectively, if the'/ &
1504	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1505	' the 3D-simulation'/)
1506	480 FORMAT (' Particles:'/ &
1507	' ---------'// &
1508	' Particle advection is active (switched on at t = ', F7.1, &
1509	' s)'/ &
1510	' Start of new particle generations every ',F6.1,' s'/ &
1511	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1512	' bottom: ', A, ' top: ', A/&
1513	' Maximum particle age: ',F9.1,' s'/ &
1514	' Advection stopped at t = ',F9.1,' s'/ &
1515	' Particles are sorted every ',F9.1,' s'/)
1516	481 FORMAT (' Particles have random start positions'/)
1517	482 FORMAT (' Particles are advected only horizontally'/)
1518	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1519	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1520	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1521	' Maximum age of the end of the tail: ',F8.2,' s')
1522	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1523	486 FORMAT (' Particle statistics are written on file'/)
1524	487 FORMAT (' Number of particle groups: ',I2/)
1525	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1526	' minimum timestep for advection: ', F7.5/)
1527	489 FORMAT (' Number of particles simultaneously released at each ', &
1528	'point: ', I5/)
1529	490 FORMAT (' Particle group ',I2,':'/ &
1530	' Particle radius: ',E10.3, 'm')
1531	491 FORMAT (' Particle inertia is activated'/ &
1532	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1533	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1534	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1535	' y:',F8.1,' - ',F8.1,' m'/&
1536	' z:',F8.1,' - ',F8.1,' m'/&
1537	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1538	' m dz = ',F8.1,' m'/)
1539	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1540	F8.2,' s'/)
1541	495 FORMAT (' Number of particles in total domain: ',I10/)
1542	500 FORMAT (//' 1D-Model parameters:'/ &
1543	' -------------------'// &
1544	' Simulation time: ',F8.1,' s'/ &
1545	' Run-controll output every: ',F8.1,' s'/ &
1546	' Vertical profile output every: ',F8.1,' s'/ &
1547	' Mixing length calculation: ',A/ &
1548	' Dissipation calculation: ',A/)
1549	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1550
1551
1552	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 130

Download in other formats: