Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1166

Last change on this file since 1166 was 1160, checked in by fricke, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 78.3 KB

Line
1	SUBROUTINE header
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: header.f90 1160 2013-05-21 12:06:24Z raasch $
27	!
28	! 1159 2013-05-21 11:58:22Z fricke
29	! +use_cmax
30	!
31	! 1115 2013-03-26 18:16:16Z hoffmann
32	! descriptions for Seifert-Beheng-cloud-physics-scheme added
33	!
34	! 1111 2013-03-08 23:54:10Z raasch
35	! output of accelerator board information
36	! ibc_p_b = 2 removed
37	!
38	! 1108 2013-03-05 07:03:32Z raasch
39	! bugfix for r1106
40	!
41	! 1106 2013-03-04 05:31:38Z raasch
42	! some format changes for coupled runs
43	!
44	! 1092 2013-02-02 11:24:22Z raasch
45	! unused variables removed
46	!
47	! 1036 2012-10-22 13:43:42Z raasch
48	! code put under GPL (PALM 3.9)
49	!
50	! 1031 2012-10-19 14:35:30Z raasch
51	! output of netCDF data format modified
52	!
53	! 1015 2012-09-27 09:23:24Z raasch
54	! output of Aajustment of mixing length to the Prandtl mixing length at first
55	! grid point above ground removed
56	!
57	! 1003 2012-09-14 14:35:53Z raasch
58	! output of information about equal/unequal subdomain size removed
59	!
60	! 1001 2012-09-13 14:08:46Z raasch
61	! all actions concerning leapfrog- and upstream-spline-scheme removed
62	!
63	! 978 2012-08-09 08:28:32Z fricke
64	! -km_damp_max, outflow_damping_width
65	! +pt_damping_factor, pt_damping_width
66	! +z0h
67	!
68	! 964 2012-07-26 09:14:24Z raasch
69	! output of profil-related quantities removed
70	!
71	! 940 2012-07-09 14:31:00Z raasch
72	! Output in case of simulations for pure neutral stratification (no pt-equation
73	! solved)
74	!
75	! 927 2012-06-06 19:15:04Z raasch
76	! output of masking_method for mg-solver
77	!
78	! 868 2012-03-28 12:21:07Z raasch
79	! translation velocity in Galilean transformation changed to 0.6 * ug
80	!
81	! 833 2012-02-22 08:55:55Z maronga
82	! Adjusted format for leaf area density
83	!
84	! 828 2012-02-21 12:00:36Z raasch
85	! output of dissipation_classes + radius_classes
86	!
87	! 825 2012-02-19 03:03:44Z raasch
88	! Output of cloud physics parameters/quantities complemented and restructured
89	!
90	! 767 2011-10-14 06:39:12Z raasch
91	! Output of given initial u,v-profiles
92	!
93	! 759 2011-09-15 13:58:31Z raasch
94	! output of maximum number of parallel io streams
95	!
96	! 707 2011-03-29 11:39:40Z raasch
97	! bc_lr/ns replaced by bc_lr/ns_cyc
98	!
99	! 667 2010-12-23 12:06:00Z suehring/gryschka
100	! Output of advection scheme.
101	! Modified output of Prandtl-layer height.
102	!
103	! 580 2010-10-05 13:59:11Z heinze
104	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
105	! ws_vertical_gradient_level to subs_vertical_gradient_level and
106	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
107	!
108	! 493 2010-03-01 08:30:24Z raasch
109	! NetCDF data output format extendend for NetCDF4/HDF5
110	!
111	! 449 2010-02-02 11:23:59Z raasch
112	! +large scale vertical motion (subsidence/ascent)
113	! Bugfix: index problem concerning gradient_level indices removed
114	!
115	! 410 2009-12-04 17:05:40Z letzel
116	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
117	! mask_scale\|_x\|y\|z, masks, skip_time_domask
118	!
119	! 346 2009-07-06 10:13:41Z raasch
120	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
121	! Coupling with independent precursor runs.
122	! Output of messages replaced by message handling routine.
123	! Output of several additional dvr parameters
124	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
125	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
126	! dp_smooth, dpdxy, u_bulk, v_bulk
127	! topography_grid_convention moved from user_header
128	! small bugfix concerning 3d 64bit netcdf output format
129	!
130	! 206 2008-10-13 14:59:11Z raasch
131	! Bugfix: error in zu index in case of section_xy = -1
132	!
133	! 198 2008-09-17 08:55:28Z raasch
134	! Format adjustments allowing output of larger revision numbers
135	!
136	! 197 2008-09-16 15:29:03Z raasch
137	! allow 100 spectra levels instead of 10 for consistency with
138	! define_netcdf_header,
139	! bugfix in the output of the characteristic levels of potential temperature,
140	! geostrophic wind, scalar concentration, humidity and leaf area density,
141	! output of turbulence recycling informations
142	!
143	! 138 2007-11-28 10:03:58Z letzel
144	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
145	! Allow two instead of one digit to specify isosurface and slicer variables.
146	! Output of sorting frequency of particles
147	!
148	! 108 2007-08-24 15:10:38Z letzel
149	! Output of informations for coupled model runs (boundary conditions etc.)
150	! + output of momentumfluxes at the top boundary
151	! Rayleigh damping for ocean, e_init
152	!
153	! 97 2007-06-21 08:23:15Z raasch
154	! Adjustments for the ocean version.
155	! use_pt_reference renamed use_reference
156	!
157	! 87 2007-05-22 15:46:47Z raasch
158	! Bugfix: output of use_upstream_for_tke
159	!
160	! 82 2007-04-16 15:40:52Z raasch
161	! Preprocessor strings for different linux clusters changed to "lc",
162	! routine local_flush is used for buffer flushing
163	!
164	! 76 2007-03-29 00:58:32Z raasch
165	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
166	! output of the loop optimization method, moisture renamed humidity,
167	! output of subversion revision number
168	!
169	! 19 2007-02-23 04:53:48Z raasch
170	! Output of scalar flux applied at top boundary
171	!
172	! RCS Log replace by Id keyword, revision history cleaned up
173	!
174	! Revision 1.63 2006/08/22 13:53:13 raasch
175	! Output of dz_max
176	!
177	! Revision 1.1 1997/08/11 06:17:20 raasch
178	! Initial revision
179	!
180	!
181	! Description:
182	! ------------
183	! Writing a header with all important informations about the actual run.
184	! This subroutine is called three times, two times at the beginning
185	! (writing information on files RUN_CONTROL and HEADER) and one time at the
186	! end of the run, then writing additional information about CPU-usage on file
187	! header.
188	!-----------------------------------------------------------------------------!
189
190	USE arrays_3d
191	USE control_parameters
192	USE cloud_parameters
193	USE cpulog
194	USE dvrp_variables
195	USE grid_variables
196	USE indices
197	USE model_1d
198	USE particle_attributes
199	USE pegrid
200	USE subsidence_mod
201	USE spectrum
202
203	IMPLICIT NONE
204
205	CHARACTER (LEN=1) :: prec
206	CHARACTER (LEN=2) :: do2d_mode
207	CHARACTER (LEN=5) :: section_chr
208	CHARACTER (LEN=10) :: coor_chr, host_chr
209	CHARACTER (LEN=16) :: begin_chr
210	CHARACTER (LEN=26) :: ver_rev
211	CHARACTER (LEN=40) :: output_format
212	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
213	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
214	domask_chr, run_classification
215	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
216	temperatures, ugcomponent, vgcomponent
217	CHARACTER (LEN=85) :: roben, runten
218
219	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
220
221	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
222	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
223	REAL :: cpuseconds_per_simulated_second
224
225	!
226	!-- Open the output file. At the end of the simulation, output is directed
227	!-- to unit 19.
228	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
229	.NOT. simulated_time_at_begin /= simulated_time ) THEN
230	io = 15 ! header output on file RUN_CONTROL
231	ELSE
232	io = 19 ! header output on file HEADER
233	ENDIF
234	CALL check_open( io )
235
236	!
237	!-- At the end of the run, output file (HEADER) will be rewritten with
238	!-- new informations
239	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
240
241	!
242	!-- Determine kind of model run
243	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
244	run_classification = '3D - restart run'
245	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
246	run_classification = '3D - run with cyclic fill of 3D - prerun data'
247	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
248	run_classification = '3D - run without 1D - prerun'
249	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
250	run_classification = '3D - run with 1D - prerun'
251	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
252	run_classification = '3D - run initialized by user'
253	ELSE
254	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
255	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
256	ENDIF
257	IF ( ocean ) THEN
258	run_classification = 'ocean - ' // run_classification
259	ELSE
260	run_classification = 'atmosphere - ' // run_classification
261	ENDIF
262
263	!
264	!-- Run-identification, date, time, host
265	host_chr = host(1:10)
266	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
267	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
268	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
269	#if defined( __mpi2 )
270	mpi_type = 2
271	#else
272	mpi_type = 1
273	#endif
274	WRITE ( io, 101 ) mpi_type, coupling_mode
275	ENDIF
276	#if defined( __parallel )
277	IF ( coupling_start_time /= 0.0 ) THEN
278	IF ( coupling_start_time > simulated_time_at_begin ) THEN
279	WRITE ( io, 109 )
280	ELSE
281	WRITE ( io, 114 )
282	ENDIF
283	ENDIF
284	#endif
285	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
286	ADJUSTR( host_chr )
287	#if defined( __parallel )
288	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
289	char1 = 'calculated'
290	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
291	host(1:2) == 'lc' ) .AND. &
292	npex == -1 .AND. pdims(2) == 1 ) THEN
293	char1 = 'forced'
294	ELSE
295	char1 = 'predefined'
296	ENDIF
297	IF ( threads_per_task == 1 ) THEN
298	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
299	ELSE
300	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
301	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
302	ENDIF
303	IF ( num_acc_per_node /= 0 ) WRITE ( io, 117 ) num_acc_per_node
304	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
305	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
306	npex == -1 .AND. pdims(2) == 1 ) &
307	THEN
308	WRITE ( io, 106 )
309	ELSEIF ( pdims(2) == 1 ) THEN
310	WRITE ( io, 107 ) 'x'
311	ELSEIF ( pdims(1) == 1 ) THEN
312	WRITE ( io, 107 ) 'y'
313	ENDIF
314	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
315	IF ( numprocs /= maximum_parallel_io_streams ) THEN
316	WRITE ( io, 108 ) maximum_parallel_io_streams
317	ENDIF
318	#else
319	IF ( num_acc_per_node /= 0 ) WRITE ( io, 120 ) num_acc_per_node
320	#endif
321	WRITE ( io, 99 )
322
323	!
324	!-- Numerical schemes
325	WRITE ( io, 110 )
326	IF ( psolver(1:7) == 'poisfft' ) THEN
327	WRITE ( io, 111 ) TRIM( fft_method )
328	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
329	ELSEIF ( psolver == 'sor' ) THEN
330	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
331	ELSEIF ( psolver == 'multigrid' ) THEN
332	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
333	IF ( mg_cycles == -1 ) THEN
334	WRITE ( io, 140 ) residual_limit
335	ELSE
336	WRITE ( io, 141 ) mg_cycles
337	ENDIF
338	IF ( mg_switch_to_pe0_level == 0 ) THEN
339	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
340	nzt_mg(1)
341	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
342	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
343	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
344	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
345	nzt_mg(mg_switch_to_pe0_level), &
346	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
347	nzt_mg(1)
348	ENDIF
349	IF ( masking_method ) WRITE ( io, 144 )
350	ENDIF
351	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
352	THEN
353	WRITE ( io, 142 )
354	ENDIF
355
356	IF ( momentum_advec == 'pw-scheme' ) THEN
357	WRITE ( io, 113 )
358	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
359	WRITE ( io, 503 )
360	ENDIF
361	IF ( scalar_advec == 'pw-scheme' ) THEN
362	WRITE ( io, 116 )
363	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
364	WRITE ( io, 504 )
365	ELSE
366	WRITE ( io, 118 )
367	ENDIF
368
369	WRITE ( io, 139 ) TRIM( loop_optimization )
370
371	IF ( galilei_transformation ) THEN
372	IF ( use_ug_for_galilei_tr ) THEN
373	char1 = '0.6 * geostrophic wind'
374	ELSE
375	char1 = 'mean wind in model domain'
376	ENDIF
377	IF ( simulated_time_at_begin == simulated_time ) THEN
378	char2 = 'at the start of the run'
379	ELSE
380	char2 = 'at the end of the run'
381	ENDIF
382	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
383	advected_distance_x/1000.0, advected_distance_y/1000.0
384	ENDIF
385	WRITE ( io, 122 ) timestep_scheme
386	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
387	IF ( rayleigh_damping_factor /= 0.0 ) THEN
388	IF ( .NOT. ocean ) THEN
389	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
390	rayleigh_damping_factor
391	ELSE
392	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
393	rayleigh_damping_factor
394	ENDIF
395	ENDIF
396	IF ( neutral ) WRITE ( io, 131 ) pt_surface
397	IF ( humidity ) THEN
398	IF ( .NOT. cloud_physics ) THEN
399	WRITE ( io, 129 )
400	ELSE
401	WRITE ( io, 130 )
402	ENDIF
403	ENDIF
404	IF ( passive_scalar ) WRITE ( io, 134 )
405	IF ( conserve_volume_flow ) THEN
406	WRITE ( io, 150 ) conserve_volume_flow_mode
407	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
408	WRITE ( io, 151 ) u_bulk, v_bulk
409	ENDIF
410	ELSEIF ( dp_external ) THEN
411	IF ( dp_smooth ) THEN
412	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
413	ELSE
414	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
415	ENDIF
416	ENDIF
417	IF ( large_scale_subsidence ) THEN
418	WRITE ( io, 153 )
419	WRITE ( io, 154 )
420	ENDIF
421	WRITE ( io, 99 )
422
423	!
424	!-- Runtime and timestep informations
425	WRITE ( io, 200 )
426	IF ( .NOT. dt_fixed ) THEN
427	WRITE ( io, 201 ) dt_max, cfl_factor
428	ELSE
429	WRITE ( io, 202 ) dt
430	ENDIF
431	WRITE ( io, 203 ) simulated_time_at_begin, end_time
432
433	IF ( time_restart /= 9999999.9 .AND. &
434	simulated_time_at_begin == simulated_time ) THEN
435	IF ( dt_restart == 9999999.9 ) THEN
436	WRITE ( io, 204 ) ' Restart at: ',time_restart
437	ELSE
438	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
439	ENDIF
440	ENDIF
441
442	IF ( simulated_time_at_begin /= simulated_time ) THEN
443	i = MAX ( log_point_s(10)%counts, 1 )
444	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
445	cpuseconds_per_simulated_second = 0.0
446	ELSE
447	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
448	( simulated_time - &
449	simulated_time_at_begin )
450	ENDIF
451	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
452	log_point_s(10)%sum / REAL( i ), &
453	cpuseconds_per_simulated_second
454	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
455	IF ( dt_restart == 9999999.9 ) THEN
456	WRITE ( io, 204 ) ' Next restart at: ',time_restart
457	ELSE
458	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
459	ENDIF
460	ENDIF
461	ENDIF
462
463	!
464	!-- Start time for coupled runs, if independent precursor runs for atmosphere
465	!-- and ocean are used or have been used. In this case, coupling_start_time
466	!-- defines the time when the coupling is switched on.
467	IF ( coupling_start_time /= 0.0 ) THEN
468	WRITE ( io, 207 ) coupling_start_time
469	ENDIF
470
471	!
472	!-- Computational grid
473	IF ( .NOT. ocean ) THEN
474	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
475	IF ( dz_stretch_level_index < nzt+1 ) THEN
476	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
477	dz_stretch_factor, dz_max
478	ENDIF
479	ELSE
480	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
481	IF ( dz_stretch_level_index > 0 ) THEN
482	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
483	dz_stretch_factor, dz_max
484	ENDIF
485	ENDIF
486	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
487	MIN( nnz+2, nzt+2 )
488	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
489
490	!
491	!-- Topography
492	WRITE ( io, 270 ) topography
493	SELECT CASE ( TRIM( topography ) )
494
495	CASE ( 'flat' )
496	! no actions necessary
497
498	CASE ( 'single_building' )
499	blx = INT( building_length_x / dx )
500	bly = INT( building_length_y / dy )
501	bh = INT( building_height / dz )
502
503	IF ( building_wall_left == 9999999.9 ) THEN
504	building_wall_left = ( nx + 1 - blx ) / 2 * dx
505	ENDIF
506	bxl = INT ( building_wall_left / dx + 0.5 )
507	bxr = bxl + blx
508
509	IF ( building_wall_south == 9999999.9 ) THEN
510	building_wall_south = ( ny + 1 - bly ) / 2 * dy
511	ENDIF
512	bys = INT ( building_wall_south / dy + 0.5 )
513	byn = bys + bly
514
515	WRITE ( io, 271 ) building_length_x, building_length_y, &
516	building_height, bxl, bxr, bys, byn
517
518	CASE ( 'single_street_canyon' )
519	ch = NINT( canyon_height / dz )
520	IF ( canyon_width_x /= 9999999.9 ) THEN
521	!
522	!-- Street canyon in y direction
523	cwx = NINT( canyon_width_x / dx )
524	IF ( canyon_wall_left == 9999999.9 ) THEN
525	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
526	ENDIF
527	cxl = NINT( canyon_wall_left / dx )
528	cxr = cxl + cwx
529	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
530
531	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
532	!
533	!-- Street canyon in x direction
534	cwy = NINT( canyon_width_y / dy )
535	IF ( canyon_wall_south == 9999999.9 ) THEN
536	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
537	ENDIF
538	cys = NINT( canyon_wall_south / dy )
539	cyn = cys + cwy
540	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
541	ENDIF
542
543	END SELECT
544
545	IF ( TRIM( topography ) /= 'flat' ) THEN
546	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
547	IF ( TRIM( topography ) == 'single_building' .OR. &
548	TRIM( topography ) == 'single_street_canyon' ) THEN
549	WRITE ( io, 278 )
550	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
551	WRITE ( io, 279 )
552	ENDIF
553	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
554	WRITE ( io, 278 )
555	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
556	WRITE ( io, 279 )
557	ENDIF
558	ENDIF
559
560	IF ( plant_canopy ) THEN
561
562	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
563	IF ( passive_scalar ) THEN
564	WRITE ( io, 281 ) scalar_exchange_coefficient, &
565	leaf_surface_concentration
566	ENDIF
567
568	!
569	!-- Heat flux at the top of vegetation
570	WRITE ( io, 282 ) cthf
571
572	!
573	!-- Leaf area density profile
574	!-- Building output strings, starting with surface value
575	WRITE ( learde, '(F6.4)' ) lad_surface
576	gradients = '------'
577	slices = ' 0'
578	coordinates = ' 0.0'
579	i = 1
580	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
581
582	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
583	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
584
585	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
586	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
587
588	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
589	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
590
591	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
592	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
593
594	i = i + 1
595	ENDDO
596
597	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
598	TRIM( gradients ), TRIM( slices )
599
600	ENDIF
601
602	!
603	!-- Boundary conditions
604	IF ( ibc_p_b == 0 ) THEN
605	runten = 'p(0) = 0 \|'
606	ELSEIF ( ibc_p_b == 1 ) THEN
607	runten = 'p(0) = p(1) \|'
608	ENDIF
609	IF ( ibc_p_t == 0 ) THEN
610	roben = 'p(nzt+1) = 0 \|'
611	ELSE
612	roben = 'p(nzt+1) = p(nzt) \|'
613	ENDIF
614
615	IF ( ibc_uv_b == 0 ) THEN
616	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
617	ELSE
618	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
619	ENDIF
620	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
621	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
622	ELSEIF ( ibc_uv_t == 0 ) THEN
623	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
624	ELSE
625	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
626	ENDIF
627
628	IF ( ibc_pt_b == 0 ) THEN
629	runten = TRIM( runten ) // ' pt(0) = pt_surface'
630	ELSEIF ( ibc_pt_b == 1 ) THEN
631	runten = TRIM( runten ) // ' pt(0) = pt(1)'
632	ELSEIF ( ibc_pt_b == 2 ) THEN
633	runten = TRIM( runten ) // ' pt(0) = from coupled model'
634	ENDIF
635	IF ( ibc_pt_t == 0 ) THEN
636	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
637	ELSEIF( ibc_pt_t == 1 ) THEN
638	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
639	ELSEIF( ibc_pt_t == 2 ) THEN
640	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
641
642	ENDIF
643
644	WRITE ( io, 300 ) runten, roben
645
646	IF ( .NOT. constant_diffusion ) THEN
647	IF ( ibc_e_b == 1 ) THEN
648	runten = 'e(0) = e(1)'
649	ELSE
650	runten = 'e(0) = e(1) = (u/0.1)*2'
651	ENDIF
652	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
653
654	WRITE ( io, 301 ) 'e', runten, roben
655
656	ENDIF
657
658	IF ( ocean ) THEN
659	runten = 'sa(0) = sa(1)'
660	IF ( ibc_sa_t == 0 ) THEN
661	roben = 'sa(nzt+1) = sa_surface'
662	ELSE
663	roben = 'sa(nzt+1) = sa(nzt)'
664	ENDIF
665	WRITE ( io, 301 ) 'sa', runten, roben
666	ENDIF
667
668	IF ( humidity ) THEN
669	IF ( ibc_q_b == 0 ) THEN
670	runten = 'q(0) = q_surface'
671	ELSE
672	runten = 'q(0) = q(1)'
673	ENDIF
674	IF ( ibc_q_t == 0 ) THEN
675	roben = 'q(nzt) = q_top'
676	ELSE
677	roben = 'q(nzt) = q(nzt-1) + dq/dz'
678	ENDIF
679	WRITE ( io, 301 ) 'q', runten, roben
680	ENDIF
681
682	IF ( passive_scalar ) THEN
683	IF ( ibc_q_b == 0 ) THEN
684	runten = 's(0) = s_surface'
685	ELSE
686	runten = 's(0) = s(1)'
687	ENDIF
688	IF ( ibc_q_t == 0 ) THEN
689	roben = 's(nzt) = s_top'
690	ELSE
691	roben = 's(nzt) = s(nzt-1) + ds/dz'
692	ENDIF
693	WRITE ( io, 301 ) 's', runten, roben
694	ENDIF
695
696	IF ( use_surface_fluxes ) THEN
697	WRITE ( io, 303 )
698	IF ( constant_heatflux ) THEN
699	WRITE ( io, 306 ) surface_heatflux
700	IF ( random_heatflux ) WRITE ( io, 307 )
701	ENDIF
702	IF ( humidity .AND. constant_waterflux ) THEN
703	WRITE ( io, 311 ) surface_waterflux
704	ENDIF
705	IF ( passive_scalar .AND. constant_waterflux ) THEN
706	WRITE ( io, 313 ) surface_waterflux
707	ENDIF
708	ENDIF
709
710	IF ( use_top_fluxes ) THEN
711	WRITE ( io, 304 )
712	IF ( coupling_mode == 'uncoupled' ) THEN
713	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
714	IF ( constant_top_heatflux ) THEN
715	WRITE ( io, 306 ) top_heatflux
716	ENDIF
717	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
718	WRITE ( io, 316 )
719	ENDIF
720	IF ( ocean .AND. constant_top_salinityflux ) THEN
721	WRITE ( io, 309 ) top_salinityflux
722	ENDIF
723	IF ( humidity .OR. passive_scalar ) THEN
724	WRITE ( io, 315 )
725	ENDIF
726	ENDIF
727
728	IF ( prandtl_layer ) THEN
729	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
730	z0h_factor*roughness_length, kappa, &
731	rif_min, rif_max
732	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
733	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
734	WRITE ( io, 312 )
735	ENDIF
736	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
737	WRITE ( io, 314 )
738	ENDIF
739	ELSE
740	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
741	WRITE ( io, 310 ) rif_min, rif_max
742	ENDIF
743	ENDIF
744
745	WRITE ( io, 317 ) bc_lr, bc_ns
746	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
747	WRITE ( io, 318 ) use_cmax, pt_damping_width, pt_damping_factor
748	IF ( turbulent_inflow ) THEN
749	WRITE ( io, 319 ) recycling_width, recycling_plane, &
750	inflow_damping_height, inflow_damping_width
751	ENDIF
752	ENDIF
753
754	!
755	!-- Listing of 1D-profiles
756	WRITE ( io, 325 ) dt_dopr_listing
757	IF ( averaging_interval_pr /= 0.0 ) THEN
758	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
759	ENDIF
760
761	!
762	!-- DATA output
763	WRITE ( io, 330 )
764	IF ( averaging_interval_pr /= 0.0 ) THEN
765	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
766	ENDIF
767
768	!
769	!-- 1D-profiles
770	dopr_chr = 'Profile:'
771	IF ( dopr_n /= 0 ) THEN
772	WRITE ( io, 331 )
773
774	output_format = ''
775	IF ( netcdf_output ) THEN
776	output_format = output_format_netcdf
777	ENDIF
778	WRITE ( io, 344 ) output_format
779
780	DO i = 1, dopr_n
781	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
782	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
783	WRITE ( io, 332 ) dopr_chr
784	dopr_chr = ' :'
785	ENDIF
786	ENDDO
787
788	IF ( dopr_chr /= '' ) THEN
789	WRITE ( io, 332 ) dopr_chr
790	ENDIF
791	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
792	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
793	ENDIF
794
795	!
796	!-- 2D-arrays
797	DO av = 0, 1
798
799	i = 1
800	do2d_xy = ''
801	do2d_xz = ''
802	do2d_yz = ''
803	DO WHILE ( do2d(av,i) /= ' ' )
804
805	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
806	do2d_mode = do2d(av,i)(l-1:l)
807
808	SELECT CASE ( do2d_mode )
809	CASE ( 'xy' )
810	ll = LEN_TRIM( do2d_xy )
811	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
812	CASE ( 'xz' )
813	ll = LEN_TRIM( do2d_xz )
814	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
815	CASE ( 'yz' )
816	ll = LEN_TRIM( do2d_yz )
817	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
818	END SELECT
819
820	i = i + 1
821
822	ENDDO
823
824	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
825	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
826	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
827	( netcdf_output .OR. iso2d_output ) ) THEN
828
829	IF ( av == 0 ) THEN
830	WRITE ( io, 334 ) ''
831	ELSE
832	WRITE ( io, 334 ) '(time-averaged)'
833	ENDIF
834
835	IF ( do2d_at_begin ) THEN
836	begin_chr = 'and at the start'
837	ELSE
838	begin_chr = ''
839	ENDIF
840
841	output_format = ''
842	IF ( netcdf_output ) THEN
843	output_format = output_format_netcdf
844	ENDIF
845	IF ( iso2d_output ) THEN
846	IF ( netcdf_output ) THEN
847	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
848	ELSE
849	output_format = 'iso2d'
850	ENDIF
851	ENDIF
852	WRITE ( io, 344 ) output_format
853
854	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
855	i = 1
856	slices = '/'
857	coordinates = '/'
858	!
859	!-- Building strings with index and coordinate informations of the
860	!-- slices
861	DO WHILE ( section(i,1) /= -9999 )
862
863	WRITE (section_chr,'(I5)') section(i,1)
864	section_chr = ADJUSTL( section_chr )
865	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
866
867	IF ( section(i,1) == -1 ) THEN
868	WRITE (coor_chr,'(F10.1)') -1.0
869	ELSE
870	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
871	ENDIF
872	coor_chr = ADJUSTL( coor_chr )
873	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
874
875	i = i + 1
876	ENDDO
877	IF ( av == 0 ) THEN
878	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
879	TRIM( begin_chr ), 'k', TRIM( slices ), &
880	TRIM( coordinates )
881	IF ( skip_time_do2d_xy /= 0.0 ) THEN
882	WRITE ( io, 339 ) skip_time_do2d_xy
883	ENDIF
884	ELSE
885	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
886	TRIM( begin_chr ), averaging_interval, &
887	dt_averaging_input, 'k', TRIM( slices ), &
888	TRIM( coordinates )
889	IF ( skip_time_data_output_av /= 0.0 ) THEN
890	WRITE ( io, 339 ) skip_time_data_output_av
891	ENDIF
892	ENDIF
893
894	ENDIF
895
896	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
897	i = 1
898	slices = '/'
899	coordinates = '/'
900	!
901	!-- Building strings with index and coordinate informations of the
902	!-- slices
903	DO WHILE ( section(i,2) /= -9999 )
904
905	WRITE (section_chr,'(I5)') section(i,2)
906	section_chr = ADJUSTL( section_chr )
907	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
908
909	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
910	coor_chr = ADJUSTL( coor_chr )
911	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
912
913	i = i + 1
914	ENDDO
915	IF ( av == 0 ) THEN
916	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
917	TRIM( begin_chr ), 'j', TRIM( slices ), &
918	TRIM( coordinates )
919	IF ( skip_time_do2d_xz /= 0.0 ) THEN
920	WRITE ( io, 339 ) skip_time_do2d_xz
921	ENDIF
922	ELSE
923	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
924	TRIM( begin_chr ), averaging_interval, &
925	dt_averaging_input, 'j', TRIM( slices ), &
926	TRIM( coordinates )
927	IF ( skip_time_data_output_av /= 0.0 ) THEN
928	WRITE ( io, 339 ) skip_time_data_output_av
929	ENDIF
930	ENDIF
931	ENDIF
932
933	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
934	i = 1
935	slices = '/'
936	coordinates = '/'
937	!
938	!-- Building strings with index and coordinate informations of the
939	!-- slices
940	DO WHILE ( section(i,3) /= -9999 )
941
942	WRITE (section_chr,'(I5)') section(i,3)
943	section_chr = ADJUSTL( section_chr )
944	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
945
946	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
947	coor_chr = ADJUSTL( coor_chr )
948	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
949
950	i = i + 1
951	ENDDO
952	IF ( av == 0 ) THEN
953	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
954	TRIM( begin_chr ), 'i', TRIM( slices ), &
955	TRIM( coordinates )
956	IF ( skip_time_do2d_yz /= 0.0 ) THEN
957	WRITE ( io, 339 ) skip_time_do2d_yz
958	ENDIF
959	ELSE
960	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
961	TRIM( begin_chr ), averaging_interval, &
962	dt_averaging_input, 'i', TRIM( slices ), &
963	TRIM( coordinates )
964	IF ( skip_time_data_output_av /= 0.0 ) THEN
965	WRITE ( io, 339 ) skip_time_data_output_av
966	ENDIF
967	ENDIF
968	ENDIF
969
970	ENDIF
971
972	ENDDO
973
974	!
975	!-- 3d-arrays
976	DO av = 0, 1
977
978	i = 1
979	do3d_chr = ''
980	DO WHILE ( do3d(av,i) /= ' ' )
981
982	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
983	i = i + 1
984
985	ENDDO
986
987	IF ( do3d_chr /= '' ) THEN
988	IF ( av == 0 ) THEN
989	WRITE ( io, 336 ) ''
990	ELSE
991	WRITE ( io, 336 ) '(time-averaged)'
992	ENDIF
993
994	output_format = ''
995	IF ( netcdf_output ) THEN
996	output_format = output_format_netcdf
997	ENDIF
998	IF ( avs_output ) THEN
999	IF ( netcdf_output ) THEN
1000	output_format = TRIM( output_format_netcdf ) // ' and avs'
1001	ELSE
1002	output_format = 'avs'
1003	ENDIF
1004	ENDIF
1005	WRITE ( io, 344 ) output_format
1006
1007	IF ( do3d_at_begin ) THEN
1008	begin_chr = 'and at the start'
1009	ELSE
1010	begin_chr = ''
1011	ENDIF
1012	IF ( av == 0 ) THEN
1013	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1014	zu(nz_do3d), nz_do3d
1015	ELSE
1016	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1017	TRIM( begin_chr ), averaging_interval, &
1018	dt_averaging_input, zu(nz_do3d), nz_do3d
1019	ENDIF
1020
1021	IF ( do3d_compress ) THEN
1022	do3d_chr = ''
1023	i = 1
1024	DO WHILE ( do3d(av,i) /= ' ' )
1025
1026	SELECT CASE ( do3d(av,i) )
1027	CASE ( 'u' )
1028	j = 1
1029	CASE ( 'v' )
1030	j = 2
1031	CASE ( 'w' )
1032	j = 3
1033	CASE ( 'p' )
1034	j = 4
1035	CASE ( 'pt' )
1036	j = 5
1037	END SELECT
1038	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1039	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1040	':' // prec // ','
1041	i = i + 1
1042
1043	ENDDO
1044	WRITE ( io, 338 ) do3d_chr
1045
1046	ENDIF
1047
1048	IF ( av == 0 ) THEN
1049	IF ( skip_time_do3d /= 0.0 ) THEN
1050	WRITE ( io, 339 ) skip_time_do3d
1051	ENDIF
1052	ELSE
1053	IF ( skip_time_data_output_av /= 0.0 ) THEN
1054	WRITE ( io, 339 ) skip_time_data_output_av
1055	ENDIF
1056	ENDIF
1057
1058	ENDIF
1059
1060	ENDDO
1061
1062	!
1063	!-- masked arrays
1064	IF ( masks > 0 ) WRITE ( io, 345 ) &
1065	mask_scale_x, mask_scale_y, mask_scale_z
1066	DO mid = 1, masks
1067	DO av = 0, 1
1068
1069	i = 1
1070	domask_chr = ''
1071	DO WHILE ( domask(mid,av,i) /= ' ' )
1072	domask_chr = TRIM( domask_chr ) // ' ' // &
1073	TRIM( domask(mid,av,i) ) // ','
1074	i = i + 1
1075	ENDDO
1076
1077	IF ( domask_chr /= '' ) THEN
1078	IF ( av == 0 ) THEN
1079	WRITE ( io, 346 ) '', mid
1080	ELSE
1081	WRITE ( io, 346 ) ' (time-averaged)', mid
1082	ENDIF
1083
1084	output_format = ' '
1085	IF ( netcdf_output ) THEN
1086	output_format = output_format_netcdf
1087	ENDIF
1088	WRITE ( io, 344 ) output_format
1089
1090	IF ( av == 0 ) THEN
1091	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1092	ELSE
1093	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1094	averaging_interval, dt_averaging_input
1095	ENDIF
1096
1097	IF ( av == 0 ) THEN
1098	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1099	WRITE ( io, 339 ) skip_time_domask(mid)
1100	ENDIF
1101	ELSE
1102	IF ( skip_time_data_output_av /= 0.0 ) THEN
1103	WRITE ( io, 339 ) skip_time_data_output_av
1104	ENDIF
1105	ENDIF
1106	!
1107	!-- output locations
1108	DO dim = 1, 3
1109	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1110	count = 0
1111	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1112	count = count + 1
1113	ENDDO
1114	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1115	mask(mid,dim,:count)
1116	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1117	mask_loop(mid,dim,2) < 0.0 .AND. &
1118	mask_loop(mid,dim,3) == 0.0 ) THEN
1119	WRITE ( io, 350 ) dir(dim), dir(dim)
1120	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1121	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1122	mask_loop(mid,dim,1:2)
1123	ELSE
1124	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1125	mask_loop(mid,dim,1:3)
1126	ENDIF
1127	ENDDO
1128	ENDIF
1129
1130	ENDDO
1131	ENDDO
1132
1133	!
1134	!-- Timeseries
1135	IF ( dt_dots /= 9999999.9 ) THEN
1136	WRITE ( io, 340 )
1137
1138	output_format = ''
1139	IF ( netcdf_output ) THEN
1140	output_format = output_format_netcdf
1141	ENDIF
1142	WRITE ( io, 344 ) output_format
1143	WRITE ( io, 341 ) dt_dots
1144	ENDIF
1145
1146	#if defined( __dvrp_graphics )
1147	!
1148	!-- Dvrp-output
1149	IF ( dt_dvrp /= 9999999.9 ) THEN
1150	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1151	TRIM( dvrp_username ), TRIM( dvrp_directory )
1152	i = 1
1153	l = 0
1154	m = 0
1155	DO WHILE ( mode_dvrp(i) /= ' ' )
1156	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1157	READ ( mode_dvrp(i), '(10X,I2)' ) j
1158	l = l + 1
1159	IF ( do3d(0,j) /= ' ' ) THEN
1160	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1161	isosurface_color(:,l)
1162	ENDIF
1163	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1164	READ ( mode_dvrp(i), '(6X,I2)' ) j
1165	m = m + 1
1166	IF ( do2d(0,j) /= ' ' ) THEN
1167	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1168	slicer_range_limits_dvrp(:,m)
1169	ENDIF
1170	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1171	WRITE ( io, 363 ) dvrp_psize
1172	IF ( particle_dvrpsize /= 'none' ) THEN
1173	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1174	dvrpsize_interval
1175	ENDIF
1176	IF ( particle_color /= 'none' ) THEN
1177	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1178	color_interval
1179	ENDIF
1180	ENDIF
1181	i = i + 1
1182	ENDDO
1183
1184	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1185	superelevation_y, superelevation, clip_dvrp_l, &
1186	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1187
1188	IF ( TRIM( topography ) /= 'flat' ) THEN
1189	WRITE ( io, 366 ) topography_color
1190	IF ( cluster_size > 1 ) THEN
1191	WRITE ( io, 367 ) cluster_size
1192	ENDIF
1193	ENDIF
1194
1195	ENDIF
1196	#endif
1197
1198	#if defined( __spectra )
1199	!
1200	!-- Spectra output
1201	IF ( dt_dosp /= 9999999.9 ) THEN
1202	WRITE ( io, 370 )
1203
1204	output_format = ' '
1205	IF ( netcdf_output ) THEN
1206	output_format = output_format_netcdf
1207	ENDIF
1208	WRITE ( io, 344 ) output_format
1209	WRITE ( io, 371 ) dt_dosp
1210	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1211	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1212	( spectra_direction(i), i = 1,10 ), &
1213	( comp_spectra_level(i), i = 1,100 ), &
1214	( plot_spectra_level(i), i = 1,100 ), &
1215	averaging_interval_sp, dt_averaging_input_pr
1216	ENDIF
1217	#endif
1218
1219	WRITE ( io, 99 )
1220
1221	!
1222	!-- Physical quantities
1223	WRITE ( io, 400 )
1224
1225	!
1226	!-- Geostrophic parameters
1227	WRITE ( io, 410 ) omega, phi, f, fs
1228
1229	!
1230	!-- Other quantities
1231	WRITE ( io, 411 ) g
1232	IF ( use_reference ) THEN
1233	IF ( ocean ) THEN
1234	WRITE ( io, 412 ) prho_reference
1235	ELSE
1236	WRITE ( io, 413 ) pt_reference
1237	ENDIF
1238	ENDIF
1239
1240	!
1241	!-- Cloud physics parameters
1242	IF ( cloud_physics ) THEN
1243	WRITE ( io, 415 )
1244	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1245	IF ( icloud_scheme == 0 ) THEN
1246	WRITE ( io, 510 ) 1.0E-6 * nc_const
1247	IF ( precipitation ) WRITE ( io, 511 ) c_sedimentation
1248	ENDIF
1249	ENDIF
1250
1251	!-- Profile of the geostrophic wind (component ug)
1252	!-- Building output strings
1253	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1254	gradients = '------'
1255	slices = ' 0'
1256	coordinates = ' 0.0'
1257	i = 1
1258	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1259
1260	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1261	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1262
1263	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1264	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1265
1266	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1267	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1268
1269	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1270	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1271
1272	IF ( i == 10 ) THEN
1273	EXIT
1274	ELSE
1275	i = i + 1
1276	ENDIF
1277
1278	ENDDO
1279
1280	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1281	TRIM( gradients ), TRIM( slices )
1282
1283	!-- Profile of the geostrophic wind (component vg)
1284	!-- Building output strings
1285	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1286	gradients = '------'
1287	slices = ' 0'
1288	coordinates = ' 0.0'
1289	i = 1
1290	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1291
1292	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1293	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1294
1295	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1296	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1297
1298	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1299	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1300
1301	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1302	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1303
1304	IF ( i == 10 ) THEN
1305	EXIT
1306	ELSE
1307	i = i + 1
1308	ENDIF
1309
1310	ENDDO
1311
1312	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1313	TRIM( gradients ), TRIM( slices )
1314
1315	!
1316	!-- Initial wind profiles
1317	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1318
1319	!
1320	!-- Initial temperature profile
1321	!-- Building output strings, starting with surface temperature
1322	WRITE ( temperatures, '(F6.2)' ) pt_surface
1323	gradients = '------'
1324	slices = ' 0'
1325	coordinates = ' 0.0'
1326	i = 1
1327	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1328
1329	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1330	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1331
1332	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1333	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1334
1335	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1336	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1337
1338	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1339	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1340
1341	IF ( i == 10 ) THEN
1342	EXIT
1343	ELSE
1344	i = i + 1
1345	ENDIF
1346
1347	ENDDO
1348
1349	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1350	TRIM( gradients ), TRIM( slices )
1351
1352	!
1353	!-- Initial humidity profile
1354	!-- Building output strings, starting with surface humidity
1355	IF ( humidity .OR. passive_scalar ) THEN
1356	WRITE ( temperatures, '(E8.1)' ) q_surface
1357	gradients = '--------'
1358	slices = ' 0'
1359	coordinates = ' 0.0'
1360	i = 1
1361	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1362
1363	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1364	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1365
1366	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1367	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1368
1369	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1370	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1371
1372	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1373	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1374
1375	IF ( i == 10 ) THEN
1376	EXIT
1377	ELSE
1378	i = i + 1
1379	ENDIF
1380
1381	ENDDO
1382
1383	IF ( humidity ) THEN
1384	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1385	TRIM( gradients ), TRIM( slices )
1386	ELSE
1387	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1388	TRIM( gradients ), TRIM( slices )
1389	ENDIF
1390	ENDIF
1391
1392	!
1393	!-- Initial salinity profile
1394	!-- Building output strings, starting with surface salinity
1395	IF ( ocean ) THEN
1396	WRITE ( temperatures, '(F6.2)' ) sa_surface
1397	gradients = '------'
1398	slices = ' 0'
1399	coordinates = ' 0.0'
1400	i = 1
1401	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1402
1403	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1404	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1405
1406	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1407	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1408
1409	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1410	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1411
1412	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1413	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1414
1415	IF ( i == 10 ) THEN
1416	EXIT
1417	ELSE
1418	i = i + 1
1419	ENDIF
1420
1421	ENDDO
1422
1423	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1424	TRIM( gradients ), TRIM( slices )
1425	ENDIF
1426
1427	!
1428	!-- Profile for the large scale vertial velocity
1429	!-- Building output strings, starting with surface value
1430	IF ( large_scale_subsidence ) THEN
1431	temperatures = ' 0.0'
1432	gradients = '------'
1433	slices = ' 0'
1434	coordinates = ' 0.0'
1435	i = 1
1436	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1437
1438	WRITE (coor_chr,'(E10.2,7X)') &
1439	w_subs(subs_vertical_gradient_level_i(i))
1440	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1441
1442	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1443	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1444
1445	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1446	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1447
1448	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1449	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1450
1451	IF ( i == 10 ) THEN
1452	EXIT
1453	ELSE
1454	i = i + 1
1455	ENDIF
1456
1457	ENDDO
1458
1459	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1460	TRIM( gradients ), TRIM( slices )
1461	ENDIF
1462
1463	!
1464	!-- Cloud physcis parameters / quantities / numerical methods
1465	WRITE ( io, 430 )
1466	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1467	WRITE ( io, 431 )
1468	ELSEIF ( humidity .AND. cloud_physics ) THEN
1469	WRITE ( io, 432 )
1470	IF ( radiation ) WRITE ( io, 132 )
1471	IF ( icloud_scheme == 1 ) THEN
1472	IF ( precipitation ) WRITE ( io, 133 )
1473	ELSEIF ( icloud_scheme == 0 ) THEN
1474	IF ( drizzle ) WRITE ( io, 506 )
1475	IF ( precipitation ) THEN
1476	WRITE ( io, 505 )
1477	IF ( turbulence ) WRITE ( io, 507 )
1478	IF ( ventilation_effect ) WRITE ( io, 508 )
1479	IF ( limiter_sedimentation ) WRITE ( io, 509 )
1480	ENDIF
1481	ENDIF
1482	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1483	WRITE ( io, 433 )
1484	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1485	IF ( collision_kernel /= 'none' ) THEN
1486	WRITE ( io, 435 ) TRIM( collision_kernel )
1487	IF ( collision_kernel(6:9) == 'fast' ) THEN
1488	WRITE ( io, 436 ) radius_classes, dissipation_classes
1489	ENDIF
1490	ELSE
1491	WRITE ( io, 437 )
1492	ENDIF
1493	ENDIF
1494
1495	!
1496	!-- LES / turbulence parameters
1497	WRITE ( io, 450 )
1498
1499	!--
1500	! ... LES-constants used must still be added here
1501	!--
1502	IF ( constant_diffusion ) THEN
1503	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1504	prandtl_number
1505	ENDIF
1506	IF ( .NOT. constant_diffusion) THEN
1507	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1508	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1509	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1510	ENDIF
1511
1512	!
1513	!-- Special actions during the run
1514	WRITE ( io, 470 )
1515	IF ( create_disturbances ) THEN
1516	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1517	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1518	zu(disturbance_level_ind_t), disturbance_level_ind_t
1519	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1520	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1521	ELSE
1522	WRITE ( io, 473 ) disturbance_energy_limit
1523	ENDIF
1524	WRITE ( io, 474 ) TRIM( random_generator )
1525	ENDIF
1526	IF ( pt_surface_initial_change /= 0.0 ) THEN
1527	WRITE ( io, 475 ) pt_surface_initial_change
1528	ENDIF
1529	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1530	WRITE ( io, 476 ) q_surface_initial_change
1531	ENDIF
1532	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1533	WRITE ( io, 477 ) q_surface_initial_change
1534	ENDIF
1535
1536	IF ( particle_advection ) THEN
1537	!
1538	!-- Particle attributes
1539	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1540	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1541	end_time_prel, dt_sort_particles
1542	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1543	IF ( random_start_position ) WRITE ( io, 481 )
1544	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1545	WRITE ( io, 495 ) total_number_of_particles
1546	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1547	WRITE ( io, 483 ) maximum_number_of_tailpoints
1548	IF ( minimum_tailpoint_distance /= 0 ) THEN
1549	WRITE ( io, 484 ) total_number_of_tails, &
1550	minimum_tailpoint_distance, &
1551	maximum_tailpoint_age
1552	ENDIF
1553	ENDIF
1554	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1555	WRITE ( io, 485 ) dt_write_particle_data
1556	output_format = ' '
1557	IF ( netcdf_output ) THEN
1558	IF ( netcdf_data_format > 1 ) THEN
1559	output_format = 'netcdf (64 bit offset) and binary'
1560	ELSE
1561	output_format = 'netcdf and binary'
1562	ENDIF
1563	ELSE
1564	output_format = 'binary'
1565	ENDIF
1566	WRITE ( io, 344 ) output_format
1567	ENDIF
1568	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1569	IF ( write_particle_statistics ) WRITE ( io, 486 )
1570
1571	WRITE ( io, 487 ) number_of_particle_groups
1572
1573	DO i = 1, number_of_particle_groups
1574	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1575	WRITE ( io, 490 ) i, 0.0
1576	WRITE ( io, 492 )
1577	ELSE
1578	WRITE ( io, 490 ) i, radius(i)
1579	IF ( density_ratio(i) /= 0.0 ) THEN
1580	WRITE ( io, 491 ) density_ratio(i)
1581	ELSE
1582	WRITE ( io, 492 )
1583	ENDIF
1584	ENDIF
1585	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1586	pdx(i), pdy(i), pdz(i)
1587	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1588	ENDDO
1589
1590	ENDIF
1591
1592
1593	!
1594	!-- Parameters of 1D-model
1595	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1596	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1597	mixing_length_1d, dissipation_1d
1598	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1599	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1600	ENDIF
1601	ENDIF
1602
1603	!
1604	!-- User-defined informations
1605	CALL user_header( io )
1606
1607	WRITE ( io, 99 )
1608
1609	!
1610	!-- Write buffer contents to disc immediately
1611	CALL local_flush( io )
1612
1613	!
1614	!-- Here the FORMATs start
1615
1616	99 FORMAT (1X,78('-'))
1617	100 FORMAT (/1X,'******************************',6X,42('-')/ &
1618	1X,'* ',A,' *',6X,A/ &
1619	1X,'******************************',6X,42('-'))
1620	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1621	37X,42('-'))
1622	102 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
1623	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
1624	' Run on host: ',A10)
1625	#if defined( __parallel )
1626	103 FORMAT (' Number of PEs:',10X,I6,6X,'Processor grid (x,y): (',I3,',',I3, &
1627	')',1X,A)
1628	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1629	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1630	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1631	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1632	37X,'because the job is running on an SMP-cluster')
1633	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1634	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1635	109 FORMAT (37X,'Precursor run for coupled atmos-ocean run'/ &
1636	37X,42('-'))
1637	114 FORMAT (37X,'Coupled atmosphere-ocean run following'/ &
1638	37X,'independent precursor runs'/ &
1639	37X,42('-'))
1640	117 FORMAT (' Accelerator boards / node: ',I2)
1641	#endif
1642	110 FORMAT (/' Numerical Schemes:'/ &
1643	' -----------------'/)
1644	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1645	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1646	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1647	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1648	' or Upstream')
1649	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1650	' or Upstream')
1651	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1652	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
1653	' translation velocity = ',A/ &
1654	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1655	120 FORMAT (' Accelerator boards: ',8X,I2)
1656	122 FORMAT (' --> Time differencing scheme: ',A)
1657	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1658	' maximum damping coefficient: ',F5.3, ' 1/s')
1659	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1660	130 FORMAT (' --> Additional prognostic equation for the total water content')
1661	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1662	F6.2, ' K assumed')
1663	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1664	' effective emissivity scheme')
1665	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1666	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1667	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1668	A,'-cycle)'/ &
1669	' number of grid levels: ',I2/ &
1670	' Gauss-Seidel red/black iterations: ',I2)
1671	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1672	I3,')')
1673	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1674	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1675	I3,')'/ &
1676	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1677	I3,')')
1678	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1679	139 FORMAT (' --> Loop optimization method: ',A)
1680	140 FORMAT (' maximum residual allowed: ',E10.3)
1681	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1682	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1683	'step')
1684	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1685	'kinetic energy')
1686	144 FORMAT (' masking method is used')
1687	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1688	'conserved'/ &
1689	' using the ',A,' mode')
1690	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1691	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1692	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1693	/' starting from dp_level_b =', F8.3, 'm', A /)
1694	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1695	'prognostic equation for')
1696	154 FORMAT (' the potential temperature')
1697	200 FORMAT (//' Run time and time step information:'/ &
1698	' ----------------------------------'/)
1699	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1700	' CFL-factor: ',F4.2)
1701	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1702	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1703	' End time: ',F9.3,' s')
1704	204 FORMAT ( A,F9.3,' s')
1705	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1706	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1707	' CPU-time used: ',F9.3,' s per timestep: ', &
1708	' ',F9.3,' s'/ &
1709	' per second of simulated tim', &
1710	'e: ',F9.3,' s')
1711	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
1712	250 FORMAT (//' Computational grid and domain size:'/ &
1713	' ----------------------------------'// &
1714	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1715	' m dz = ',F7.3,' m'/ &
1716	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1717	' m z(u) = ',F10.3,' m'/)
1718	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1719	' factor: ',F5.3/ &
1720	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1721	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1722	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1723	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1724	' degrees')
1725	270 FORMAT (//' Topography informations:'/ &
1726	' -----------------------'// &
1727	1X,'Topography: ',A)
1728	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1729	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1730	' / ',I4)
1731	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1732	' direction' / &
1733	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1734	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1735	278 FORMAT (' Topography grid definition convention:'/ &
1736	' cell edge (staggered grid points'/ &
1737	' (u in x-direction, v in y-direction))' /)
1738	279 FORMAT (' Topography grid definition convention:'/ &
1739	' cell center (scalar grid points)' /)
1740	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1741	' ------------------------------'// &
1742	' Canopy mode: ', A / &
1743	' Canopy top: ',I4 / &
1744	' Leaf drag coefficient: ',F6.2 /)
1745	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1746	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1747	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1748	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1749	' Height: ',A,' m'/ &
1750	' Leaf area density: ',A,' m2/m3'/ &
1751	' Gradient: ',A,' m2/m4'/ &
1752	' Gridpoint: ',A)
1753
1754	300 FORMAT (//' Boundary conditions:'/ &
1755	' -------------------'// &
1756	' p uv ', &
1757	' pt'// &
1758	' B. bound.: ',A/ &
1759	' T. bound.: ',A)
1760	301 FORMAT (/' ',A// &
1761	' B. bound.: ',A/ &
1762	' T. bound.: ',A)
1763	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1764	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1765	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1766	'computational u,v-level:'// &
1767	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
1768	' m kappa = ',F4.2/ &
1769	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1770	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1771	307 FORMAT (' Heatflux has a random normal distribution')
1772	308 FORMAT (' Predefined surface temperature')
1773	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1774	310 FORMAT (//' 1D-Model:'// &
1775	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1776	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1777	312 FORMAT (' Predefined surface humidity')
1778	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1779	314 FORMAT (' Predefined scalar value at the surface')
1780	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1781	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1782	'atmosphere model')
1783	317 FORMAT (//' Lateral boundaries:'/ &
1784	' left/right: ',A/ &
1785	' north/south: ',A)
1786	318 FORMAT (/' use_cmax: ',L1 / &
1787	' pt damping layer width = ',F8.2,' m, pt ', &
1788	'damping factor = ',F6.4)
1789	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1790	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1791	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1792	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1793	' v: ',F9.6,' m2/s2')
1794	325 FORMAT (//' List output:'/ &
1795	' -----------'// &
1796	' 1D-Profiles:'/ &
1797	' Output every ',F8.2,' s')
1798	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1799	' Averaging input every ',F8.2,' s')
1800	330 FORMAT (//' Data output:'/ &
1801	' -----------'/)
1802	331 FORMAT (/' 1D-Profiles:')
1803	332 FORMAT (/' ',A)
1804	333 FORMAT (' Output every ',F8.2,' s',/ &
1805	' Time averaged over ',F8.2,' s'/ &
1806	' Averaging input every ',F8.2,' s')
1807	334 FORMAT (/' 2D-Arrays',A,':')
1808	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1809	' Output every ',F8.2,' s ',A/ &
1810	' Cross sections at ',A1,' = ',A/ &
1811	' scalar-coordinates: ',A,' m'/)
1812	336 FORMAT (/' 3D-Arrays',A,':')
1813	337 FORMAT (/' Arrays: ',A/ &
1814	' Output every ',F8.2,' s ',A/ &
1815	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1816	338 FORMAT (' Compressed data output'/ &
1817	' Decimal precision: ',A/)
1818	339 FORMAT (' No output during initial ',F8.2,' s')
1819	340 FORMAT (/' Time series:')
1820	341 FORMAT (' Output every ',F8.2,' s'/)
1821	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1822	' Output every ',F8.2,' s ',A/ &
1823	' Time averaged over ',F8.2,' s'/ &
1824	' Averaging input every ',F8.2,' s'/ &
1825	' Cross sections at ',A1,' = ',A/ &
1826	' scalar-coordinates: ',A,' m'/)
1827	343 FORMAT (/' Arrays: ',A/ &
1828	' Output every ',F8.2,' s ',A/ &
1829	' Time averaged over ',F8.2,' s'/ &
1830	' Averaging input every ',F8.2,' s'/ &
1831	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1832	344 FORMAT (' Output format: ',A/)
1833	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1834	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1835	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1836	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1837	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1838	347 FORMAT (' Variables: ',A/ &
1839	' Output every ',F8.2,' s')
1840	348 FORMAT (' Variables: ',A/ &
1841	' Output every ',F8.2,' s'/ &
1842	' Time averaged over ',F8.2,' s'/ &
1843	' Averaging input every ',F8.2,' s')
1844	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1845	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1846	13(' ',8(F8.2,',')/) )
1847	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1848	'all gridpoints along ',A,'-direction (default).' )
1849	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1850	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1851	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1852	#if defined( __dvrp_graphics )
1853	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1854	' Output every ',F7.1,' s'/ &
1855	' Output mode: ',A/ &
1856	' Host / User: ',A,' / ',A/ &
1857	' Directory: ',A// &
1858	' The sequence contains:')
1859	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1860	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1861	362 FORMAT (/' Slicer plane ',A/ &
1862	' Slicer limits: [',F6.2,',',F6.2,']')
1863	363 FORMAT (/' Particles'/ &
1864	' particle size: ',F7.2,' m')
1865	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1866	F6.2,',',F6.2,']')
1867	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1868	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1869	')'/ &
1870	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1871	' from y = ',F9.1,' m to y = ',F9.1,' m')
1872	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1873	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1874	#endif
1875	#if defined( __spectra )
1876	370 FORMAT (' Spectra:')
1877	371 FORMAT (' Output every ',F7.1,' s'/)
1878	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1879	' Directions: ', 10(A5,',')/ &
1880	' height levels k = ', 20(I3,',')/ &
1881	' ', 20(I3,',')/ &
1882	' ', 20(I3,',')/ &
1883	' ', 20(I3,',')/ &
1884	' ', 19(I3,','),I3,'.'/ &
1885	' height levels selected for standard plot:'/ &
1886	' k = ', 20(I3,',')/ &
1887	' ', 20(I3,',')/ &
1888	' ', 20(I3,',')/ &
1889	' ', 20(I3,',')/ &
1890	' ', 19(I3,','),I3,'.'/ &
1891	' Time averaged over ', F7.1, ' s,' / &
1892	' Profiles for the time averaging are taken every ', &
1893	F6.1,' s')
1894	#endif
1895	400 FORMAT (//' Physical quantities:'/ &
1896	' -------------------'/)
1897	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1898	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1899	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1900	' f* = ',F9.6,' 1/s')
1901	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1902	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1903	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1904	415 FORMAT (/' Cloud physics parameters:'/ &
1905	' ------------------------'/)
1906	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1907	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1908	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1909	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1910	' Vapourization heat : L_v = ',E8.2,' J/kg')
1911	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1912	' Height: ',A,' m'/ &
1913	' Temperature: ',A,' K'/ &
1914	' Gradient: ',A,' K/100m'/ &
1915	' Gridpoint: ',A)
1916	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1917	' Height: ',A,' m'/ &
1918	' Humidity: ',A,' kg/kg'/ &
1919	' Gradient: ',A,' (kg/kg)/100m'/ &
1920	' Gridpoint: ',A)
1921	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1922	' Height: ',A,' m'/ &
1923	' Scalar concentration: ',A,' kg/m**3'/ &
1924	' Gradient: ',A,' (kg/m**3)/100m'/ &
1925	' Gridpoint: ',A)
1926	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1927	' Height: ',A,' m'/ &
1928	' ug: ',A,' m/s'/ &
1929	' Gradient: ',A,' 1/100s'/ &
1930	' Gridpoint: ',A)
1931	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1932	' Height: ',A,' m'/ &
1933	' vg: ',A,' m/s'/ &
1934	' Gradient: ',A,' 1/100s'/ &
1935	' Gridpoint: ',A)
1936	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1937	' Height: ',A,' m'/ &
1938	' Salinity: ',A,' psu'/ &
1939	' Gradient: ',A,' psu/100m'/ &
1940	' Gridpoint: ',A)
1941	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1942	' Height: ',A,' m'/ &
1943	' w_subs: ',A,' m/s'/ &
1944	' Gradient: ',A,' (m/s)/100m'/ &
1945	' Gridpoint: ',A)
1946	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1947	' profiles')
1948	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1949	' ----------------------------------'/)
1950	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1951	'on)')
1952	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1953	' total water content is used.'/ &
1954	' Condensation is parameterized via 0% - or 100% scheme.')
1955	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1956	'icle model')
1957	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1958	' droplets < 1.0E-6 m')
1959	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1960	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1961	'are used'/ &
1962	' number of radius classes: ',I3,' interval ', &
1963	'[1.0E-6,2.0E-4] m'/ &
1964	' number of dissipation classes: ',I2,' interval ', &
1965	'[0,1000] cm2/s3')
1966	437 FORMAT (' Droplet collision is switched off')
1967	450 FORMAT (//' LES / Turbulence quantities:'/ &
1968	' ---------------------------'/)
1969	451 FORMAT (' Diffusion coefficients are constant:'/ &
1970	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1971	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1972	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1973	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1974	470 FORMAT (//' Actions during the simulation:'/ &
1975	' -----------------------------'/)
1976	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1977	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1978	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1979	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1980	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1981	' to i/j =',I4)
1982	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1983	1X,F5.3, ' m2/s2')
1984	474 FORMAT (' Random number generator used : ',A/)
1985	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1986	'respectively, if'/ &
1987	' the value is negative) by ',F5.2,' K at the beginning of the',&
1988	' 3D-simulation'/)
1989	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1990	'respectively, if the'/ &
1991	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1992	' the 3D-simulation'/)
1993	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1994	'respectively, if the'/ &
1995	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1996	' the 3D-simulation'/)
1997	480 FORMAT (' Particles:'/ &
1998	' ---------'// &
1999	' Particle advection is active (switched on at t = ', F7.1, &
2000	' s)'/ &
2001	' Start of new particle generations every ',F6.1,' s'/ &
2002	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2003	' bottom: ', A, ' top: ', A/&
2004	' Maximum particle age: ',F9.1,' s'/ &
2005	' Advection stopped at t = ',F9.1,' s'/ &
2006	' Particles are sorted every ',F9.1,' s'/)
2007	481 FORMAT (' Particles have random start positions'/)
2008	482 FORMAT (' Particles are advected only horizontally'/)
2009	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2010	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2011	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2012	' Maximum age of the end of the tail: ',F8.2,' s')
2013	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2014	486 FORMAT (' Particle statistics are written on file'/)
2015	487 FORMAT (' Number of particle groups: ',I2/)
2016	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2017	' minimum timestep for advection: ', F7.5/)
2018	489 FORMAT (' Number of particles simultaneously released at each ', &
2019	'point: ', I5/)
2020	490 FORMAT (' Particle group ',I2,':'/ &
2021	' Particle radius: ',E10.3, 'm')
2022	491 FORMAT (' Particle inertia is activated'/ &
2023	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2024	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2025	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2026	' y:',F8.1,' - ',F8.1,' m'/&
2027	' z:',F8.1,' - ',F8.1,' m'/&
2028	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2029	' m dz = ',F8.1,' m'/)
2030	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2031	F8.2,' s'/)
2032	495 FORMAT (' Number of particles in total domain: ',I10/)
2033	500 FORMAT (//' 1D-Model parameters:'/ &
2034	' -------------------'// &
2035	' Simulation time: ',F8.1,' s'/ &
2036	' Run-controll output every: ',F8.1,' s'/ &
2037	' Vertical profile output every: ',F8.1,' s'/ &
2038	' Mixing length calculation: ',A/ &
2039	' Dissipation calculation: ',A/)
2040	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2041	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2042	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2043	505 FORMAT (' Precipitation parameterization via Seifert-Beheng-Scheme')
2044	506 FORMAT (' Drizzle parameterization via Stokes law')
2045	507 FORMAT (' Turbulence effects on precipitation process')
2046	508 FORMAT (' Ventilation effects on evaporation of rain drops')
2047	509 FORMAT (' Slope limiter used for sedimentation process')
2048	510 FORMAT (' Droplet density : N_c = ',F6.1,' 1/cm**3')
2049	511 FORMAT (' Sedimentation Courant number: '/&
2050	' C_s = ',F3.1,' ')
2051
2052	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |