Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1118

Last change on this file since 1118 was 1116, checked in by hoffmann, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 78.2 KB

Line
1	SUBROUTINE header
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: header.f90 1116 2013-03-26 18:49:55Z suehring $
27	!
28	! 1115 2013-03-26 18:16:16Z hoffmann
29	! descriptions for Seifert-Beheng-cloud-physics-scheme added
30	!
31	! 1111 2013-03-08 23:54:10Z raasch
32	! output of accelerator board information
33	! ibc_p_b = 2 removed
34	!
35	! 1108 2013-03-05 07:03:32Z raasch
36	! bugfix for r1106
37	!
38	! 1106 2013-03-04 05:31:38Z raasch
39	! some format changes for coupled runs
40	!
41	! 1092 2013-02-02 11:24:22Z raasch
42	! unused variables removed
43	!
44	! 1036 2012-10-22 13:43:42Z raasch
45	! code put under GPL (PALM 3.9)
46	!
47	! 1031 2012-10-19 14:35:30Z raasch
48	! output of netCDF data format modified
49	!
50	! 1015 2012-09-27 09:23:24Z raasch
51	! output of Aajustment of mixing length to the Prandtl mixing length at first
52	! grid point above ground removed
53	!
54	! 1003 2012-09-14 14:35:53Z raasch
55	! output of information about equal/unequal subdomain size removed
56	!
57	! 1001 2012-09-13 14:08:46Z raasch
58	! all actions concerning leapfrog- and upstream-spline-scheme removed
59	!
60	! 978 2012-08-09 08:28:32Z fricke
61	! -km_damp_max, outflow_damping_width
62	! +pt_damping_factor, pt_damping_width
63	! +z0h
64	!
65	! 964 2012-07-26 09:14:24Z raasch
66	! output of profil-related quantities removed
67	!
68	! 940 2012-07-09 14:31:00Z raasch
69	! Output in case of simulations for pure neutral stratification (no pt-equation
70	! solved)
71	!
72	! 927 2012-06-06 19:15:04Z raasch
73	! output of masking_method for mg-solver
74	!
75	! 868 2012-03-28 12:21:07Z raasch
76	! translation velocity in Galilean transformation changed to 0.6 * ug
77	!
78	! 833 2012-02-22 08:55:55Z maronga
79	! Adjusted format for leaf area density
80	!
81	! 828 2012-02-21 12:00:36Z raasch
82	! output of dissipation_classes + radius_classes
83	!
84	! 825 2012-02-19 03:03:44Z raasch
85	! Output of cloud physics parameters/quantities complemented and restructured
86	!
87	! 767 2011-10-14 06:39:12Z raasch
88	! Output of given initial u,v-profiles
89	!
90	! 759 2011-09-15 13:58:31Z raasch
91	! output of maximum number of parallel io streams
92	!
93	! 707 2011-03-29 11:39:40Z raasch
94	! bc_lr/ns replaced by bc_lr/ns_cyc
95	!
96	! 667 2010-12-23 12:06:00Z suehring/gryschka
97	! Output of advection scheme.
98	! Modified output of Prandtl-layer height.
99	!
100	! 580 2010-10-05 13:59:11Z heinze
101	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
102	! ws_vertical_gradient_level to subs_vertical_gradient_level and
103	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
104	!
105	! 493 2010-03-01 08:30:24Z raasch
106	! NetCDF data output format extendend for NetCDF4/HDF5
107	!
108	! 449 2010-02-02 11:23:59Z raasch
109	! +large scale vertical motion (subsidence/ascent)
110	! Bugfix: index problem concerning gradient_level indices removed
111	!
112	! 410 2009-12-04 17:05:40Z letzel
113	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
114	! mask_scale\|_x\|y\|z, masks, skip_time_domask
115	!
116	! 346 2009-07-06 10:13:41Z raasch
117	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
118	! Coupling with independent precursor runs.
119	! Output of messages replaced by message handling routine.
120	! Output of several additional dvr parameters
121	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
122	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
123	! dp_smooth, dpdxy, u_bulk, v_bulk
124	! topography_grid_convention moved from user_header
125	! small bugfix concerning 3d 64bit netcdf output format
126	!
127	! 206 2008-10-13 14:59:11Z raasch
128	! Bugfix: error in zu index in case of section_xy = -1
129	!
130	! 198 2008-09-17 08:55:28Z raasch
131	! Format adjustments allowing output of larger revision numbers
132	!
133	! 197 2008-09-16 15:29:03Z raasch
134	! allow 100 spectra levels instead of 10 for consistency with
135	! define_netcdf_header,
136	! bugfix in the output of the characteristic levels of potential temperature,
137	! geostrophic wind, scalar concentration, humidity and leaf area density,
138	! output of turbulence recycling informations
139	!
140	! 138 2007-11-28 10:03:58Z letzel
141	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
142	! Allow two instead of one digit to specify isosurface and slicer variables.
143	! Output of sorting frequency of particles
144	!
145	! 108 2007-08-24 15:10:38Z letzel
146	! Output of informations for coupled model runs (boundary conditions etc.)
147	! + output of momentumfluxes at the top boundary
148	! Rayleigh damping for ocean, e_init
149	!
150	! 97 2007-06-21 08:23:15Z raasch
151	! Adjustments for the ocean version.
152	! use_pt_reference renamed use_reference
153	!
154	! 87 2007-05-22 15:46:47Z raasch
155	! Bugfix: output of use_upstream_for_tke
156	!
157	! 82 2007-04-16 15:40:52Z raasch
158	! Preprocessor strings for different linux clusters changed to "lc",
159	! routine local_flush is used for buffer flushing
160	!
161	! 76 2007-03-29 00:58:32Z raasch
162	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
163	! output of the loop optimization method, moisture renamed humidity,
164	! output of subversion revision number
165	!
166	! 19 2007-02-23 04:53:48Z raasch
167	! Output of scalar flux applied at top boundary
168	!
169	! RCS Log replace by Id keyword, revision history cleaned up
170	!
171	! Revision 1.63 2006/08/22 13:53:13 raasch
172	! Output of dz_max
173	!
174	! Revision 1.1 1997/08/11 06:17:20 raasch
175	! Initial revision
176	!
177	!
178	! Description:
179	! ------------
180	! Writing a header with all important informations about the actual run.
181	! This subroutine is called three times, two times at the beginning
182	! (writing information on files RUN_CONTROL and HEADER) and one time at the
183	! end of the run, then writing additional information about CPU-usage on file
184	! header.
185	!-----------------------------------------------------------------------------!
186
187	USE arrays_3d
188	USE control_parameters
189	USE cloud_parameters
190	USE cpulog
191	USE dvrp_variables
192	USE grid_variables
193	USE indices
194	USE model_1d
195	USE particle_attributes
196	USE pegrid
197	USE subsidence_mod
198	USE spectrum
199
200	IMPLICIT NONE
201
202	CHARACTER (LEN=1) :: prec
203	CHARACTER (LEN=2) :: do2d_mode
204	CHARACTER (LEN=5) :: section_chr
205	CHARACTER (LEN=10) :: coor_chr, host_chr
206	CHARACTER (LEN=16) :: begin_chr
207	CHARACTER (LEN=26) :: ver_rev
208	CHARACTER (LEN=40) :: output_format
209	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
210	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
211	domask_chr, run_classification
212	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
213	temperatures, ugcomponent, vgcomponent
214	CHARACTER (LEN=85) :: roben, runten
215
216	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
217
218	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
219	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
220	REAL :: cpuseconds_per_simulated_second
221
222	!
223	!-- Open the output file. At the end of the simulation, output is directed
224	!-- to unit 19.
225	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
226	.NOT. simulated_time_at_begin /= simulated_time ) THEN
227	io = 15 ! header output on file RUN_CONTROL
228	ELSE
229	io = 19 ! header output on file HEADER
230	ENDIF
231	CALL check_open( io )
232
233	!
234	!-- At the end of the run, output file (HEADER) will be rewritten with
235	!-- new informations
236	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
237
238	!
239	!-- Determine kind of model run
240	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
241	run_classification = '3D - restart run'
242	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
243	run_classification = '3D - run with cyclic fill of 3D - prerun data'
244	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
245	run_classification = '3D - run without 1D - prerun'
246	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
247	run_classification = '3D - run with 1D - prerun'
248	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
249	run_classification = '3D - run initialized by user'
250	ELSE
251	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
252	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
253	ENDIF
254	IF ( ocean ) THEN
255	run_classification = 'ocean - ' // run_classification
256	ELSE
257	run_classification = 'atmosphere - ' // run_classification
258	ENDIF
259
260	!
261	!-- Run-identification, date, time, host
262	host_chr = host(1:10)
263	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
264	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
265	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
266	#if defined( __mpi2 )
267	mpi_type = 2
268	#else
269	mpi_type = 1
270	#endif
271	WRITE ( io, 101 ) mpi_type, coupling_mode
272	ENDIF
273	#if defined( __parallel )
274	IF ( coupling_start_time /= 0.0 ) THEN
275	IF ( coupling_start_time > simulated_time_at_begin ) THEN
276	WRITE ( io, 109 )
277	ELSE
278	WRITE ( io, 114 )
279	ENDIF
280	ENDIF
281	#endif
282	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
283	ADJUSTR( host_chr )
284	#if defined( __parallel )
285	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
286	char1 = 'calculated'
287	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
288	host(1:2) == 'lc' ) .AND. &
289	npex == -1 .AND. pdims(2) == 1 ) THEN
290	char1 = 'forced'
291	ELSE
292	char1 = 'predefined'
293	ENDIF
294	IF ( threads_per_task == 1 ) THEN
295	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
296	ELSE
297	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
298	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
299	ENDIF
300	IF ( num_acc_per_node /= 0 ) WRITE ( io, 117 ) num_acc_per_node
301	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
302	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
303	npex == -1 .AND. pdims(2) == 1 ) &
304	THEN
305	WRITE ( io, 106 )
306	ELSEIF ( pdims(2) == 1 ) THEN
307	WRITE ( io, 107 ) 'x'
308	ELSEIF ( pdims(1) == 1 ) THEN
309	WRITE ( io, 107 ) 'y'
310	ENDIF
311	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
312	IF ( numprocs /= maximum_parallel_io_streams ) THEN
313	WRITE ( io, 108 ) maximum_parallel_io_streams
314	ENDIF
315	#else
316	IF ( num_acc_per_node /= 0 ) WRITE ( io, 120 ) num_acc_per_node
317	#endif
318	WRITE ( io, 99 )
319
320	!
321	!-- Numerical schemes
322	WRITE ( io, 110 )
323	IF ( psolver(1:7) == 'poisfft' ) THEN
324	WRITE ( io, 111 ) TRIM( fft_method )
325	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
326	ELSEIF ( psolver == 'sor' ) THEN
327	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
328	ELSEIF ( psolver == 'multigrid' ) THEN
329	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
330	IF ( mg_cycles == -1 ) THEN
331	WRITE ( io, 140 ) residual_limit
332	ELSE
333	WRITE ( io, 141 ) mg_cycles
334	ENDIF
335	IF ( mg_switch_to_pe0_level == 0 ) THEN
336	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
337	nzt_mg(1)
338	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
339	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
340	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
341	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
342	nzt_mg(mg_switch_to_pe0_level), &
343	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
344	nzt_mg(1)
345	ENDIF
346	IF ( masking_method ) WRITE ( io, 144 )
347	ENDIF
348	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
349	THEN
350	WRITE ( io, 142 )
351	ENDIF
352
353	IF ( momentum_advec == 'pw-scheme' ) THEN
354	WRITE ( io, 113 )
355	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
356	WRITE ( io, 503 )
357	ENDIF
358	IF ( scalar_advec == 'pw-scheme' ) THEN
359	WRITE ( io, 116 )
360	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
361	WRITE ( io, 504 )
362	ELSE
363	WRITE ( io, 118 )
364	ENDIF
365
366	WRITE ( io, 139 ) TRIM( loop_optimization )
367
368	IF ( galilei_transformation ) THEN
369	IF ( use_ug_for_galilei_tr ) THEN
370	char1 = '0.6 * geostrophic wind'
371	ELSE
372	char1 = 'mean wind in model domain'
373	ENDIF
374	IF ( simulated_time_at_begin == simulated_time ) THEN
375	char2 = 'at the start of the run'
376	ELSE
377	char2 = 'at the end of the run'
378	ENDIF
379	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
380	advected_distance_x/1000.0, advected_distance_y/1000.0
381	ENDIF
382	WRITE ( io, 122 ) timestep_scheme
383	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
384	IF ( rayleigh_damping_factor /= 0.0 ) THEN
385	IF ( .NOT. ocean ) THEN
386	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
387	rayleigh_damping_factor
388	ELSE
389	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
390	rayleigh_damping_factor
391	ENDIF
392	ENDIF
393	IF ( neutral ) WRITE ( io, 131 ) pt_surface
394	IF ( humidity ) THEN
395	IF ( .NOT. cloud_physics ) THEN
396	WRITE ( io, 129 )
397	ELSE
398	WRITE ( io, 130 )
399	ENDIF
400	ENDIF
401	IF ( passive_scalar ) WRITE ( io, 134 )
402	IF ( conserve_volume_flow ) THEN
403	WRITE ( io, 150 ) conserve_volume_flow_mode
404	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
405	WRITE ( io, 151 ) u_bulk, v_bulk
406	ENDIF
407	ELSEIF ( dp_external ) THEN
408	IF ( dp_smooth ) THEN
409	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
410	ELSE
411	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
412	ENDIF
413	ENDIF
414	IF ( large_scale_subsidence ) THEN
415	WRITE ( io, 153 )
416	WRITE ( io, 154 )
417	ENDIF
418	WRITE ( io, 99 )
419
420	!
421	!-- Runtime and timestep informations
422	WRITE ( io, 200 )
423	IF ( .NOT. dt_fixed ) THEN
424	WRITE ( io, 201 ) dt_max, cfl_factor
425	ELSE
426	WRITE ( io, 202 ) dt
427	ENDIF
428	WRITE ( io, 203 ) simulated_time_at_begin, end_time
429
430	IF ( time_restart /= 9999999.9 .AND. &
431	simulated_time_at_begin == simulated_time ) THEN
432	IF ( dt_restart == 9999999.9 ) THEN
433	WRITE ( io, 204 ) ' Restart at: ',time_restart
434	ELSE
435	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
436	ENDIF
437	ENDIF
438
439	IF ( simulated_time_at_begin /= simulated_time ) THEN
440	i = MAX ( log_point_s(10)%counts, 1 )
441	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
442	cpuseconds_per_simulated_second = 0.0
443	ELSE
444	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
445	( simulated_time - &
446	simulated_time_at_begin )
447	ENDIF
448	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
449	log_point_s(10)%sum / REAL( i ), &
450	cpuseconds_per_simulated_second
451	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
452	IF ( dt_restart == 9999999.9 ) THEN
453	WRITE ( io, 204 ) ' Next restart at: ',time_restart
454	ELSE
455	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
456	ENDIF
457	ENDIF
458	ENDIF
459
460	!
461	!-- Start time for coupled runs, if independent precursor runs for atmosphere
462	!-- and ocean are used or have been used. In this case, coupling_start_time
463	!-- defines the time when the coupling is switched on.
464	IF ( coupling_start_time /= 0.0 ) THEN
465	WRITE ( io, 207 ) coupling_start_time
466	ENDIF
467
468	!
469	!-- Computational grid
470	IF ( .NOT. ocean ) THEN
471	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
472	IF ( dz_stretch_level_index < nzt+1 ) THEN
473	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
474	dz_stretch_factor, dz_max
475	ENDIF
476	ELSE
477	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
478	IF ( dz_stretch_level_index > 0 ) THEN
479	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
480	dz_stretch_factor, dz_max
481	ENDIF
482	ENDIF
483	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
484	MIN( nnz+2, nzt+2 )
485	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
486
487	!
488	!-- Topography
489	WRITE ( io, 270 ) topography
490	SELECT CASE ( TRIM( topography ) )
491
492	CASE ( 'flat' )
493	! no actions necessary
494
495	CASE ( 'single_building' )
496	blx = INT( building_length_x / dx )
497	bly = INT( building_length_y / dy )
498	bh = INT( building_height / dz )
499
500	IF ( building_wall_left == 9999999.9 ) THEN
501	building_wall_left = ( nx + 1 - blx ) / 2 * dx
502	ENDIF
503	bxl = INT ( building_wall_left / dx + 0.5 )
504	bxr = bxl + blx
505
506	IF ( building_wall_south == 9999999.9 ) THEN
507	building_wall_south = ( ny + 1 - bly ) / 2 * dy
508	ENDIF
509	bys = INT ( building_wall_south / dy + 0.5 )
510	byn = bys + bly
511
512	WRITE ( io, 271 ) building_length_x, building_length_y, &
513	building_height, bxl, bxr, bys, byn
514
515	CASE ( 'single_street_canyon' )
516	ch = NINT( canyon_height / dz )
517	IF ( canyon_width_x /= 9999999.9 ) THEN
518	!
519	!-- Street canyon in y direction
520	cwx = NINT( canyon_width_x / dx )
521	IF ( canyon_wall_left == 9999999.9 ) THEN
522	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
523	ENDIF
524	cxl = NINT( canyon_wall_left / dx )
525	cxr = cxl + cwx
526	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
527
528	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
529	!
530	!-- Street canyon in x direction
531	cwy = NINT( canyon_width_y / dy )
532	IF ( canyon_wall_south == 9999999.9 ) THEN
533	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
534	ENDIF
535	cys = NINT( canyon_wall_south / dy )
536	cyn = cys + cwy
537	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
538	ENDIF
539
540	END SELECT
541
542	IF ( TRIM( topography ) /= 'flat' ) THEN
543	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
544	IF ( TRIM( topography ) == 'single_building' .OR. &
545	TRIM( topography ) == 'single_street_canyon' ) THEN
546	WRITE ( io, 278 )
547	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
548	WRITE ( io, 279 )
549	ENDIF
550	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
551	WRITE ( io, 278 )
552	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
553	WRITE ( io, 279 )
554	ENDIF
555	ENDIF
556
557	IF ( plant_canopy ) THEN
558
559	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
560	IF ( passive_scalar ) THEN
561	WRITE ( io, 281 ) scalar_exchange_coefficient, &
562	leaf_surface_concentration
563	ENDIF
564
565	!
566	!-- Heat flux at the top of vegetation
567	WRITE ( io, 282 ) cthf
568
569	!
570	!-- Leaf area density profile
571	!-- Building output strings, starting with surface value
572	WRITE ( learde, '(F6.4)' ) lad_surface
573	gradients = '------'
574	slices = ' 0'
575	coordinates = ' 0.0'
576	i = 1
577	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
578
579	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
580	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
581
582	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
583	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
584
585	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
586	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
587
588	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
589	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
590
591	i = i + 1
592	ENDDO
593
594	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
595	TRIM( gradients ), TRIM( slices )
596
597	ENDIF
598
599	!
600	!-- Boundary conditions
601	IF ( ibc_p_b == 0 ) THEN
602	runten = 'p(0) = 0 \|'
603	ELSEIF ( ibc_p_b == 1 ) THEN
604	runten = 'p(0) = p(1) \|'
605	ENDIF
606	IF ( ibc_p_t == 0 ) THEN
607	roben = 'p(nzt+1) = 0 \|'
608	ELSE
609	roben = 'p(nzt+1) = p(nzt) \|'
610	ENDIF
611
612	IF ( ibc_uv_b == 0 ) THEN
613	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
614	ELSE
615	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
616	ENDIF
617	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
618	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
619	ELSEIF ( ibc_uv_t == 0 ) THEN
620	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
621	ELSE
622	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
623	ENDIF
624
625	IF ( ibc_pt_b == 0 ) THEN
626	runten = TRIM( runten ) // ' pt(0) = pt_surface'
627	ELSEIF ( ibc_pt_b == 1 ) THEN
628	runten = TRIM( runten ) // ' pt(0) = pt(1)'
629	ELSEIF ( ibc_pt_b == 2 ) THEN
630	runten = TRIM( runten ) // ' pt(0) = from coupled model'
631	ENDIF
632	IF ( ibc_pt_t == 0 ) THEN
633	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
634	ELSEIF( ibc_pt_t == 1 ) THEN
635	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
636	ELSEIF( ibc_pt_t == 2 ) THEN
637	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
638
639	ENDIF
640
641	WRITE ( io, 300 ) runten, roben
642
643	IF ( .NOT. constant_diffusion ) THEN
644	IF ( ibc_e_b == 1 ) THEN
645	runten = 'e(0) = e(1)'
646	ELSE
647	runten = 'e(0) = e(1) = (u/0.1)*2'
648	ENDIF
649	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
650
651	WRITE ( io, 301 ) 'e', runten, roben
652
653	ENDIF
654
655	IF ( ocean ) THEN
656	runten = 'sa(0) = sa(1)'
657	IF ( ibc_sa_t == 0 ) THEN
658	roben = 'sa(nzt+1) = sa_surface'
659	ELSE
660	roben = 'sa(nzt+1) = sa(nzt)'
661	ENDIF
662	WRITE ( io, 301 ) 'sa', runten, roben
663	ENDIF
664
665	IF ( humidity ) THEN
666	IF ( ibc_q_b == 0 ) THEN
667	runten = 'q(0) = q_surface'
668	ELSE
669	runten = 'q(0) = q(1)'
670	ENDIF
671	IF ( ibc_q_t == 0 ) THEN
672	roben = 'q(nzt) = q_top'
673	ELSE
674	roben = 'q(nzt) = q(nzt-1) + dq/dz'
675	ENDIF
676	WRITE ( io, 301 ) 'q', runten, roben
677	ENDIF
678
679	IF ( passive_scalar ) THEN
680	IF ( ibc_q_b == 0 ) THEN
681	runten = 's(0) = s_surface'
682	ELSE
683	runten = 's(0) = s(1)'
684	ENDIF
685	IF ( ibc_q_t == 0 ) THEN
686	roben = 's(nzt) = s_top'
687	ELSE
688	roben = 's(nzt) = s(nzt-1) + ds/dz'
689	ENDIF
690	WRITE ( io, 301 ) 's', runten, roben
691	ENDIF
692
693	IF ( use_surface_fluxes ) THEN
694	WRITE ( io, 303 )
695	IF ( constant_heatflux ) THEN
696	WRITE ( io, 306 ) surface_heatflux
697	IF ( random_heatflux ) WRITE ( io, 307 )
698	ENDIF
699	IF ( humidity .AND. constant_waterflux ) THEN
700	WRITE ( io, 311 ) surface_waterflux
701	ENDIF
702	IF ( passive_scalar .AND. constant_waterflux ) THEN
703	WRITE ( io, 313 ) surface_waterflux
704	ENDIF
705	ENDIF
706
707	IF ( use_top_fluxes ) THEN
708	WRITE ( io, 304 )
709	IF ( coupling_mode == 'uncoupled' ) THEN
710	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
711	IF ( constant_top_heatflux ) THEN
712	WRITE ( io, 306 ) top_heatflux
713	ENDIF
714	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
715	WRITE ( io, 316 )
716	ENDIF
717	IF ( ocean .AND. constant_top_salinityflux ) THEN
718	WRITE ( io, 309 ) top_salinityflux
719	ENDIF
720	IF ( humidity .OR. passive_scalar ) THEN
721	WRITE ( io, 315 )
722	ENDIF
723	ENDIF
724
725	IF ( prandtl_layer ) THEN
726	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
727	z0h_factor*roughness_length, kappa, &
728	rif_min, rif_max
729	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
730	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
731	WRITE ( io, 312 )
732	ENDIF
733	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
734	WRITE ( io, 314 )
735	ENDIF
736	ELSE
737	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
738	WRITE ( io, 310 ) rif_min, rif_max
739	ENDIF
740	ENDIF
741
742	WRITE ( io, 317 ) bc_lr, bc_ns
743	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
744	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
745	IF ( turbulent_inflow ) THEN
746	WRITE ( io, 319 ) recycling_width, recycling_plane, &
747	inflow_damping_height, inflow_damping_width
748	ENDIF
749	ENDIF
750
751	!
752	!-- Listing of 1D-profiles
753	WRITE ( io, 325 ) dt_dopr_listing
754	IF ( averaging_interval_pr /= 0.0 ) THEN
755	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
756	ENDIF
757
758	!
759	!-- DATA output
760	WRITE ( io, 330 )
761	IF ( averaging_interval_pr /= 0.0 ) THEN
762	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
763	ENDIF
764
765	!
766	!-- 1D-profiles
767	dopr_chr = 'Profile:'
768	IF ( dopr_n /= 0 ) THEN
769	WRITE ( io, 331 )
770
771	output_format = ''
772	IF ( netcdf_output ) THEN
773	output_format = output_format_netcdf
774	ENDIF
775	WRITE ( io, 344 ) output_format
776
777	DO i = 1, dopr_n
778	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
779	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
780	WRITE ( io, 332 ) dopr_chr
781	dopr_chr = ' :'
782	ENDIF
783	ENDDO
784
785	IF ( dopr_chr /= '' ) THEN
786	WRITE ( io, 332 ) dopr_chr
787	ENDIF
788	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
789	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
790	ENDIF
791
792	!
793	!-- 2D-arrays
794	DO av = 0, 1
795
796	i = 1
797	do2d_xy = ''
798	do2d_xz = ''
799	do2d_yz = ''
800	DO WHILE ( do2d(av,i) /= ' ' )
801
802	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
803	do2d_mode = do2d(av,i)(l-1:l)
804
805	SELECT CASE ( do2d_mode )
806	CASE ( 'xy' )
807	ll = LEN_TRIM( do2d_xy )
808	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
809	CASE ( 'xz' )
810	ll = LEN_TRIM( do2d_xz )
811	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
812	CASE ( 'yz' )
813	ll = LEN_TRIM( do2d_yz )
814	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
815	END SELECT
816
817	i = i + 1
818
819	ENDDO
820
821	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
822	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
823	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
824	( netcdf_output .OR. iso2d_output ) ) THEN
825
826	IF ( av == 0 ) THEN
827	WRITE ( io, 334 ) ''
828	ELSE
829	WRITE ( io, 334 ) '(time-averaged)'
830	ENDIF
831
832	IF ( do2d_at_begin ) THEN
833	begin_chr = 'and at the start'
834	ELSE
835	begin_chr = ''
836	ENDIF
837
838	output_format = ''
839	IF ( netcdf_output ) THEN
840	output_format = output_format_netcdf
841	ENDIF
842	IF ( iso2d_output ) THEN
843	IF ( netcdf_output ) THEN
844	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
845	ELSE
846	output_format = 'iso2d'
847	ENDIF
848	ENDIF
849	WRITE ( io, 344 ) output_format
850
851	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
852	i = 1
853	slices = '/'
854	coordinates = '/'
855	!
856	!-- Building strings with index and coordinate informations of the
857	!-- slices
858	DO WHILE ( section(i,1) /= -9999 )
859
860	WRITE (section_chr,'(I5)') section(i,1)
861	section_chr = ADJUSTL( section_chr )
862	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
863
864	IF ( section(i,1) == -1 ) THEN
865	WRITE (coor_chr,'(F10.1)') -1.0
866	ELSE
867	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
868	ENDIF
869	coor_chr = ADJUSTL( coor_chr )
870	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
871
872	i = i + 1
873	ENDDO
874	IF ( av == 0 ) THEN
875	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
876	TRIM( begin_chr ), 'k', TRIM( slices ), &
877	TRIM( coordinates )
878	IF ( skip_time_do2d_xy /= 0.0 ) THEN
879	WRITE ( io, 339 ) skip_time_do2d_xy
880	ENDIF
881	ELSE
882	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
883	TRIM( begin_chr ), averaging_interval, &
884	dt_averaging_input, 'k', TRIM( slices ), &
885	TRIM( coordinates )
886	IF ( skip_time_data_output_av /= 0.0 ) THEN
887	WRITE ( io, 339 ) skip_time_data_output_av
888	ENDIF
889	ENDIF
890
891	ENDIF
892
893	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
894	i = 1
895	slices = '/'
896	coordinates = '/'
897	!
898	!-- Building strings with index and coordinate informations of the
899	!-- slices
900	DO WHILE ( section(i,2) /= -9999 )
901
902	WRITE (section_chr,'(I5)') section(i,2)
903	section_chr = ADJUSTL( section_chr )
904	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
905
906	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
907	coor_chr = ADJUSTL( coor_chr )
908	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
909
910	i = i + 1
911	ENDDO
912	IF ( av == 0 ) THEN
913	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
914	TRIM( begin_chr ), 'j', TRIM( slices ), &
915	TRIM( coordinates )
916	IF ( skip_time_do2d_xz /= 0.0 ) THEN
917	WRITE ( io, 339 ) skip_time_do2d_xz
918	ENDIF
919	ELSE
920	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
921	TRIM( begin_chr ), averaging_interval, &
922	dt_averaging_input, 'j', TRIM( slices ), &
923	TRIM( coordinates )
924	IF ( skip_time_data_output_av /= 0.0 ) THEN
925	WRITE ( io, 339 ) skip_time_data_output_av
926	ENDIF
927	ENDIF
928	ENDIF
929
930	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
931	i = 1
932	slices = '/'
933	coordinates = '/'
934	!
935	!-- Building strings with index and coordinate informations of the
936	!-- slices
937	DO WHILE ( section(i,3) /= -9999 )
938
939	WRITE (section_chr,'(I5)') section(i,3)
940	section_chr = ADJUSTL( section_chr )
941	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
942
943	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
944	coor_chr = ADJUSTL( coor_chr )
945	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
946
947	i = i + 1
948	ENDDO
949	IF ( av == 0 ) THEN
950	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
951	TRIM( begin_chr ), 'i', TRIM( slices ), &
952	TRIM( coordinates )
953	IF ( skip_time_do2d_yz /= 0.0 ) THEN
954	WRITE ( io, 339 ) skip_time_do2d_yz
955	ENDIF
956	ELSE
957	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
958	TRIM( begin_chr ), averaging_interval, &
959	dt_averaging_input, 'i', TRIM( slices ), &
960	TRIM( coordinates )
961	IF ( skip_time_data_output_av /= 0.0 ) THEN
962	WRITE ( io, 339 ) skip_time_data_output_av
963	ENDIF
964	ENDIF
965	ENDIF
966
967	ENDIF
968
969	ENDDO
970
971	!
972	!-- 3d-arrays
973	DO av = 0, 1
974
975	i = 1
976	do3d_chr = ''
977	DO WHILE ( do3d(av,i) /= ' ' )
978
979	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
980	i = i + 1
981
982	ENDDO
983
984	IF ( do3d_chr /= '' ) THEN
985	IF ( av == 0 ) THEN
986	WRITE ( io, 336 ) ''
987	ELSE
988	WRITE ( io, 336 ) '(time-averaged)'
989	ENDIF
990
991	output_format = ''
992	IF ( netcdf_output ) THEN
993	output_format = output_format_netcdf
994	ENDIF
995	IF ( avs_output ) THEN
996	IF ( netcdf_output ) THEN
997	output_format = TRIM( output_format_netcdf ) // ' and avs'
998	ELSE
999	output_format = 'avs'
1000	ENDIF
1001	ENDIF
1002	WRITE ( io, 344 ) output_format
1003
1004	IF ( do3d_at_begin ) THEN
1005	begin_chr = 'and at the start'
1006	ELSE
1007	begin_chr = ''
1008	ENDIF
1009	IF ( av == 0 ) THEN
1010	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1011	zu(nz_do3d), nz_do3d
1012	ELSE
1013	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1014	TRIM( begin_chr ), averaging_interval, &
1015	dt_averaging_input, zu(nz_do3d), nz_do3d
1016	ENDIF
1017
1018	IF ( do3d_compress ) THEN
1019	do3d_chr = ''
1020	i = 1
1021	DO WHILE ( do3d(av,i) /= ' ' )
1022
1023	SELECT CASE ( do3d(av,i) )
1024	CASE ( 'u' )
1025	j = 1
1026	CASE ( 'v' )
1027	j = 2
1028	CASE ( 'w' )
1029	j = 3
1030	CASE ( 'p' )
1031	j = 4
1032	CASE ( 'pt' )
1033	j = 5
1034	END SELECT
1035	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1036	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1037	':' // prec // ','
1038	i = i + 1
1039
1040	ENDDO
1041	WRITE ( io, 338 ) do3d_chr
1042
1043	ENDIF
1044
1045	IF ( av == 0 ) THEN
1046	IF ( skip_time_do3d /= 0.0 ) THEN
1047	WRITE ( io, 339 ) skip_time_do3d
1048	ENDIF
1049	ELSE
1050	IF ( skip_time_data_output_av /= 0.0 ) THEN
1051	WRITE ( io, 339 ) skip_time_data_output_av
1052	ENDIF
1053	ENDIF
1054
1055	ENDIF
1056
1057	ENDDO
1058
1059	!
1060	!-- masked arrays
1061	IF ( masks > 0 ) WRITE ( io, 345 ) &
1062	mask_scale_x, mask_scale_y, mask_scale_z
1063	DO mid = 1, masks
1064	DO av = 0, 1
1065
1066	i = 1
1067	domask_chr = ''
1068	DO WHILE ( domask(mid,av,i) /= ' ' )
1069	domask_chr = TRIM( domask_chr ) // ' ' // &
1070	TRIM( domask(mid,av,i) ) // ','
1071	i = i + 1
1072	ENDDO
1073
1074	IF ( domask_chr /= '' ) THEN
1075	IF ( av == 0 ) THEN
1076	WRITE ( io, 346 ) '', mid
1077	ELSE
1078	WRITE ( io, 346 ) ' (time-averaged)', mid
1079	ENDIF
1080
1081	output_format = ' '
1082	IF ( netcdf_output ) THEN
1083	output_format = output_format_netcdf
1084	ENDIF
1085	WRITE ( io, 344 ) output_format
1086
1087	IF ( av == 0 ) THEN
1088	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1089	ELSE
1090	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1091	averaging_interval, dt_averaging_input
1092	ENDIF
1093
1094	IF ( av == 0 ) THEN
1095	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1096	WRITE ( io, 339 ) skip_time_domask(mid)
1097	ENDIF
1098	ELSE
1099	IF ( skip_time_data_output_av /= 0.0 ) THEN
1100	WRITE ( io, 339 ) skip_time_data_output_av
1101	ENDIF
1102	ENDIF
1103	!
1104	!-- output locations
1105	DO dim = 1, 3
1106	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1107	count = 0
1108	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1109	count = count + 1
1110	ENDDO
1111	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1112	mask(mid,dim,:count)
1113	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1114	mask_loop(mid,dim,2) < 0.0 .AND. &
1115	mask_loop(mid,dim,3) == 0.0 ) THEN
1116	WRITE ( io, 350 ) dir(dim), dir(dim)
1117	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1118	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1119	mask_loop(mid,dim,1:2)
1120	ELSE
1121	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1122	mask_loop(mid,dim,1:3)
1123	ENDIF
1124	ENDDO
1125	ENDIF
1126
1127	ENDDO
1128	ENDDO
1129
1130	!
1131	!-- Timeseries
1132	IF ( dt_dots /= 9999999.9 ) THEN
1133	WRITE ( io, 340 )
1134
1135	output_format = ''
1136	IF ( netcdf_output ) THEN
1137	output_format = output_format_netcdf
1138	ENDIF
1139	WRITE ( io, 344 ) output_format
1140	WRITE ( io, 341 ) dt_dots
1141	ENDIF
1142
1143	#if defined( __dvrp_graphics )
1144	!
1145	!-- Dvrp-output
1146	IF ( dt_dvrp /= 9999999.9 ) THEN
1147	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1148	TRIM( dvrp_username ), TRIM( dvrp_directory )
1149	i = 1
1150	l = 0
1151	m = 0
1152	DO WHILE ( mode_dvrp(i) /= ' ' )
1153	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1154	READ ( mode_dvrp(i), '(10X,I2)' ) j
1155	l = l + 1
1156	IF ( do3d(0,j) /= ' ' ) THEN
1157	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1158	isosurface_color(:,l)
1159	ENDIF
1160	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1161	READ ( mode_dvrp(i), '(6X,I2)' ) j
1162	m = m + 1
1163	IF ( do2d(0,j) /= ' ' ) THEN
1164	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1165	slicer_range_limits_dvrp(:,m)
1166	ENDIF
1167	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1168	WRITE ( io, 363 ) dvrp_psize
1169	IF ( particle_dvrpsize /= 'none' ) THEN
1170	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1171	dvrpsize_interval
1172	ENDIF
1173	IF ( particle_color /= 'none' ) THEN
1174	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1175	color_interval
1176	ENDIF
1177	ENDIF
1178	i = i + 1
1179	ENDDO
1180
1181	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1182	superelevation_y, superelevation, clip_dvrp_l, &
1183	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1184
1185	IF ( TRIM( topography ) /= 'flat' ) THEN
1186	WRITE ( io, 366 ) topography_color
1187	IF ( cluster_size > 1 ) THEN
1188	WRITE ( io, 367 ) cluster_size
1189	ENDIF
1190	ENDIF
1191
1192	ENDIF
1193	#endif
1194
1195	#if defined( __spectra )
1196	!
1197	!-- Spectra output
1198	IF ( dt_dosp /= 9999999.9 ) THEN
1199	WRITE ( io, 370 )
1200
1201	output_format = ' '
1202	IF ( netcdf_output ) THEN
1203	output_format = output_format_netcdf
1204	ENDIF
1205	WRITE ( io, 344 ) output_format
1206	WRITE ( io, 371 ) dt_dosp
1207	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1208	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1209	( spectra_direction(i), i = 1,10 ), &
1210	( comp_spectra_level(i), i = 1,100 ), &
1211	( plot_spectra_level(i), i = 1,100 ), &
1212	averaging_interval_sp, dt_averaging_input_pr
1213	ENDIF
1214	#endif
1215
1216	WRITE ( io, 99 )
1217
1218	!
1219	!-- Physical quantities
1220	WRITE ( io, 400 )
1221
1222	!
1223	!-- Geostrophic parameters
1224	WRITE ( io, 410 ) omega, phi, f, fs
1225
1226	!
1227	!-- Other quantities
1228	WRITE ( io, 411 ) g
1229	IF ( use_reference ) THEN
1230	IF ( ocean ) THEN
1231	WRITE ( io, 412 ) prho_reference
1232	ELSE
1233	WRITE ( io, 413 ) pt_reference
1234	ENDIF
1235	ENDIF
1236
1237	!
1238	!-- Cloud physics parameters
1239	IF ( cloud_physics ) THEN
1240	WRITE ( io, 415 )
1241	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1242	IF ( icloud_scheme == 0 ) THEN
1243	WRITE ( io, 510 ) 1.0E-6 * nc_const
1244	IF ( precipitation ) WRITE ( io, 511 ) c_sedimentation
1245	ENDIF
1246	ENDIF
1247
1248	!-- Profile of the geostrophic wind (component ug)
1249	!-- Building output strings
1250	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1251	gradients = '------'
1252	slices = ' 0'
1253	coordinates = ' 0.0'
1254	i = 1
1255	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1256
1257	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1258	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1259
1260	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1261	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1262
1263	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1264	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1265
1266	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1267	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1268
1269	IF ( i == 10 ) THEN
1270	EXIT
1271	ELSE
1272	i = i + 1
1273	ENDIF
1274
1275	ENDDO
1276
1277	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1278	TRIM( gradients ), TRIM( slices )
1279
1280	!-- Profile of the geostrophic wind (component vg)
1281	!-- Building output strings
1282	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1283	gradients = '------'
1284	slices = ' 0'
1285	coordinates = ' 0.0'
1286	i = 1
1287	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1288
1289	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1290	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1291
1292	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1293	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1294
1295	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1296	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1297
1298	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1299	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1300
1301	IF ( i == 10 ) THEN
1302	EXIT
1303	ELSE
1304	i = i + 1
1305	ENDIF
1306
1307	ENDDO
1308
1309	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1310	TRIM( gradients ), TRIM( slices )
1311
1312	!
1313	!-- Initial wind profiles
1314	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1315
1316	!
1317	!-- Initial temperature profile
1318	!-- Building output strings, starting with surface temperature
1319	WRITE ( temperatures, '(F6.2)' ) pt_surface
1320	gradients = '------'
1321	slices = ' 0'
1322	coordinates = ' 0.0'
1323	i = 1
1324	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1325
1326	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1327	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1328
1329	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1330	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1331
1332	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1333	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1334
1335	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1336	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1337
1338	IF ( i == 10 ) THEN
1339	EXIT
1340	ELSE
1341	i = i + 1
1342	ENDIF
1343
1344	ENDDO
1345
1346	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1347	TRIM( gradients ), TRIM( slices )
1348
1349	!
1350	!-- Initial humidity profile
1351	!-- Building output strings, starting with surface humidity
1352	IF ( humidity .OR. passive_scalar ) THEN
1353	WRITE ( temperatures, '(E8.1)' ) q_surface
1354	gradients = '--------'
1355	slices = ' 0'
1356	coordinates = ' 0.0'
1357	i = 1
1358	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1359
1360	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1361	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1362
1363	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1364	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1365
1366	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1367	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1368
1369	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1370	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1371
1372	IF ( i == 10 ) THEN
1373	EXIT
1374	ELSE
1375	i = i + 1
1376	ENDIF
1377
1378	ENDDO
1379
1380	IF ( humidity ) THEN
1381	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1382	TRIM( gradients ), TRIM( slices )
1383	ELSE
1384	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1385	TRIM( gradients ), TRIM( slices )
1386	ENDIF
1387	ENDIF
1388
1389	!
1390	!-- Initial salinity profile
1391	!-- Building output strings, starting with surface salinity
1392	IF ( ocean ) THEN
1393	WRITE ( temperatures, '(F6.2)' ) sa_surface
1394	gradients = '------'
1395	slices = ' 0'
1396	coordinates = ' 0.0'
1397	i = 1
1398	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1399
1400	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1401	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1402
1403	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1404	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1405
1406	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1407	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1408
1409	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1410	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1411
1412	IF ( i == 10 ) THEN
1413	EXIT
1414	ELSE
1415	i = i + 1
1416	ENDIF
1417
1418	ENDDO
1419
1420	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1421	TRIM( gradients ), TRIM( slices )
1422	ENDIF
1423
1424	!
1425	!-- Profile for the large scale vertial velocity
1426	!-- Building output strings, starting with surface value
1427	IF ( large_scale_subsidence ) THEN
1428	temperatures = ' 0.0'
1429	gradients = '------'
1430	slices = ' 0'
1431	coordinates = ' 0.0'
1432	i = 1
1433	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1434
1435	WRITE (coor_chr,'(E10.2,7X)') &
1436	w_subs(subs_vertical_gradient_level_i(i))
1437	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1438
1439	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1440	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1441
1442	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1443	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1444
1445	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1446	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1447
1448	IF ( i == 10 ) THEN
1449	EXIT
1450	ELSE
1451	i = i + 1
1452	ENDIF
1453
1454	ENDDO
1455
1456	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1457	TRIM( gradients ), TRIM( slices )
1458	ENDIF
1459
1460	!
1461	!-- Cloud physcis parameters / quantities / numerical methods
1462	WRITE ( io, 430 )
1463	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1464	WRITE ( io, 431 )
1465	ELSEIF ( humidity .AND. cloud_physics ) THEN
1466	WRITE ( io, 432 )
1467	IF ( radiation ) WRITE ( io, 132 )
1468	IF ( icloud_scheme == 1 ) THEN
1469	IF ( precipitation ) WRITE ( io, 133 )
1470	ELSEIF ( icloud_scheme == 0 ) THEN
1471	IF ( drizzle ) WRITE ( io, 506 )
1472	IF ( precipitation ) THEN
1473	WRITE ( io, 505 )
1474	IF ( turbulence ) WRITE ( io, 507 )
1475	IF ( ventilation_effect ) WRITE ( io, 508 )
1476	IF ( limiter_sedimentation ) WRITE ( io, 509 )
1477	ENDIF
1478	ENDIF
1479	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1480	WRITE ( io, 433 )
1481	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1482	IF ( collision_kernel /= 'none' ) THEN
1483	WRITE ( io, 435 ) TRIM( collision_kernel )
1484	IF ( collision_kernel(6:9) == 'fast' ) THEN
1485	WRITE ( io, 436 ) radius_classes, dissipation_classes
1486	ENDIF
1487	ELSE
1488	WRITE ( io, 437 )
1489	ENDIF
1490	ENDIF
1491
1492	!
1493	!-- LES / turbulence parameters
1494	WRITE ( io, 450 )
1495
1496	!--
1497	! ... LES-constants used must still be added here
1498	!--
1499	IF ( constant_diffusion ) THEN
1500	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1501	prandtl_number
1502	ENDIF
1503	IF ( .NOT. constant_diffusion) THEN
1504	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1505	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1506	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1507	ENDIF
1508
1509	!
1510	!-- Special actions during the run
1511	WRITE ( io, 470 )
1512	IF ( create_disturbances ) THEN
1513	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1514	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1515	zu(disturbance_level_ind_t), disturbance_level_ind_t
1516	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1517	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1518	ELSE
1519	WRITE ( io, 473 ) disturbance_energy_limit
1520	ENDIF
1521	WRITE ( io, 474 ) TRIM( random_generator )
1522	ENDIF
1523	IF ( pt_surface_initial_change /= 0.0 ) THEN
1524	WRITE ( io, 475 ) pt_surface_initial_change
1525	ENDIF
1526	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1527	WRITE ( io, 476 ) q_surface_initial_change
1528	ENDIF
1529	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1530	WRITE ( io, 477 ) q_surface_initial_change
1531	ENDIF
1532
1533	IF ( particle_advection ) THEN
1534	!
1535	!-- Particle attributes
1536	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1537	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1538	end_time_prel, dt_sort_particles
1539	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1540	IF ( random_start_position ) WRITE ( io, 481 )
1541	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1542	WRITE ( io, 495 ) total_number_of_particles
1543	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1544	WRITE ( io, 483 ) maximum_number_of_tailpoints
1545	IF ( minimum_tailpoint_distance /= 0 ) THEN
1546	WRITE ( io, 484 ) total_number_of_tails, &
1547	minimum_tailpoint_distance, &
1548	maximum_tailpoint_age
1549	ENDIF
1550	ENDIF
1551	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1552	WRITE ( io, 485 ) dt_write_particle_data
1553	output_format = ' '
1554	IF ( netcdf_output ) THEN
1555	IF ( netcdf_data_format > 1 ) THEN
1556	output_format = 'netcdf (64 bit offset) and binary'
1557	ELSE
1558	output_format = 'netcdf and binary'
1559	ENDIF
1560	ELSE
1561	output_format = 'binary'
1562	ENDIF
1563	WRITE ( io, 344 ) output_format
1564	ENDIF
1565	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1566	IF ( write_particle_statistics ) WRITE ( io, 486 )
1567
1568	WRITE ( io, 487 ) number_of_particle_groups
1569
1570	DO i = 1, number_of_particle_groups
1571	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1572	WRITE ( io, 490 ) i, 0.0
1573	WRITE ( io, 492 )
1574	ELSE
1575	WRITE ( io, 490 ) i, radius(i)
1576	IF ( density_ratio(i) /= 0.0 ) THEN
1577	WRITE ( io, 491 ) density_ratio(i)
1578	ELSE
1579	WRITE ( io, 492 )
1580	ENDIF
1581	ENDIF
1582	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1583	pdx(i), pdy(i), pdz(i)
1584	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1585	ENDDO
1586
1587	ENDIF
1588
1589
1590	!
1591	!-- Parameters of 1D-model
1592	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1593	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1594	mixing_length_1d, dissipation_1d
1595	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1596	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1597	ENDIF
1598	ENDIF
1599
1600	!
1601	!-- User-defined informations
1602	CALL user_header( io )
1603
1604	WRITE ( io, 99 )
1605
1606	!
1607	!-- Write buffer contents to disc immediately
1608	CALL local_flush( io )
1609
1610	!
1611	!-- Here the FORMATs start
1612
1613	99 FORMAT (1X,78('-'))
1614	100 FORMAT (/1X,'******************************',6X,42('-')/ &
1615	1X,'* ',A,' *',6X,A/ &
1616	1X,'******************************',6X,42('-'))
1617	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1618	37X,42('-'))
1619	102 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
1620	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
1621	' Run on host: ',A10)
1622	#if defined( __parallel )
1623	103 FORMAT (' Number of PEs:',10X,I6,6X,'Processor grid (x,y): (',I3,',',I3, &
1624	')',1X,A)
1625	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1626	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1627	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1628	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1629	37X,'because the job is running on an SMP-cluster')
1630	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1631	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1632	109 FORMAT (37X,'Precursor run for coupled atmos-ocean run'/ &
1633	37X,42('-'))
1634	114 FORMAT (37X,'Coupled atmosphere-ocean run following'/ &
1635	37X,'independent precursor runs'/ &
1636	37X,42('-'))
1637	117 FORMAT (' Accelerator boards / node: ',I2)
1638	#endif
1639	110 FORMAT (/' Numerical Schemes:'/ &
1640	' -----------------'/)
1641	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1642	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1643	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1644	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1645	' or Upstream')
1646	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1647	' or Upstream')
1648	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1649	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
1650	' translation velocity = ',A/ &
1651	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1652	120 FORMAT (' Accelerator boards: ',8X,I2)
1653	122 FORMAT (' --> Time differencing scheme: ',A)
1654	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1655	' maximum damping coefficient: ',F5.3, ' 1/s')
1656	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1657	130 FORMAT (' --> Additional prognostic equation for the total water content')
1658	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1659	F6.2, ' K assumed')
1660	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1661	' effective emissivity scheme')
1662	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1663	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1664	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1665	A,'-cycle)'/ &
1666	' number of grid levels: ',I2/ &
1667	' Gauss-Seidel red/black iterations: ',I2)
1668	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1669	I3,')')
1670	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1671	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1672	I3,')'/ &
1673	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1674	I3,')')
1675	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1676	139 FORMAT (' --> Loop optimization method: ',A)
1677	140 FORMAT (' maximum residual allowed: ',E10.3)
1678	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1679	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1680	'step')
1681	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1682	'kinetic energy')
1683	144 FORMAT (' masking method is used')
1684	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1685	'conserved'/ &
1686	' using the ',A,' mode')
1687	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1688	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1689	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1690	/' starting from dp_level_b =', F8.3, 'm', A /)
1691	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1692	'prognostic equation for')
1693	154 FORMAT (' the potential temperature')
1694	200 FORMAT (//' Run time and time step information:'/ &
1695	' ----------------------------------'/)
1696	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1697	' CFL-factor: ',F4.2)
1698	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1699	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1700	' End time: ',F9.3,' s')
1701	204 FORMAT ( A,F9.3,' s')
1702	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1703	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1704	' CPU-time used: ',F9.3,' s per timestep: ', &
1705	' ',F9.3,' s'/ &
1706	' per second of simulated tim', &
1707	'e: ',F9.3,' s')
1708	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
1709	250 FORMAT (//' Computational grid and domain size:'/ &
1710	' ----------------------------------'// &
1711	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1712	' m dz = ',F7.3,' m'/ &
1713	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1714	' m z(u) = ',F10.3,' m'/)
1715	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1716	' factor: ',F5.3/ &
1717	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1718	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1719	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1720	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1721	' degrees')
1722	270 FORMAT (//' Topography informations:'/ &
1723	' -----------------------'// &
1724	1X,'Topography: ',A)
1725	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1726	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1727	' / ',I4)
1728	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1729	' direction' / &
1730	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1731	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1732	278 FORMAT (' Topography grid definition convention:'/ &
1733	' cell edge (staggered grid points'/ &
1734	' (u in x-direction, v in y-direction))' /)
1735	279 FORMAT (' Topography grid definition convention:'/ &
1736	' cell center (scalar grid points)' /)
1737	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1738	' ------------------------------'// &
1739	' Canopy mode: ', A / &
1740	' Canopy top: ',I4 / &
1741	' Leaf drag coefficient: ',F6.2 /)
1742	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1743	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1744	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1745	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1746	' Height: ',A,' m'/ &
1747	' Leaf area density: ',A,' m2/m3'/ &
1748	' Gradient: ',A,' m2/m4'/ &
1749	' Gridpoint: ',A)
1750
1751	300 FORMAT (//' Boundary conditions:'/ &
1752	' -------------------'// &
1753	' p uv ', &
1754	' pt'// &
1755	' B. bound.: ',A/ &
1756	' T. bound.: ',A)
1757	301 FORMAT (/' ',A// &
1758	' B. bound.: ',A/ &
1759	' T. bound.: ',A)
1760	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1761	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1762	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1763	'computational u,v-level:'// &
1764	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
1765	' m kappa = ',F4.2/ &
1766	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1767	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1768	307 FORMAT (' Heatflux has a random normal distribution')
1769	308 FORMAT (' Predefined surface temperature')
1770	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1771	310 FORMAT (//' 1D-Model:'// &
1772	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1773	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1774	312 FORMAT (' Predefined surface humidity')
1775	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1776	314 FORMAT (' Predefined scalar value at the surface')
1777	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1778	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1779	'atmosphere model')
1780	317 FORMAT (//' Lateral boundaries:'/ &
1781	' left/right: ',A/ &
1782	' north/south: ',A)
1783	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
1784	'damping factor = ',F6.4)
1785	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1786	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1787	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1788	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1789	' v: ',F9.6,' m2/s2')
1790	325 FORMAT (//' List output:'/ &
1791	' -----------'// &
1792	' 1D-Profiles:'/ &
1793	' Output every ',F8.2,' s')
1794	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1795	' Averaging input every ',F8.2,' s')
1796	330 FORMAT (//' Data output:'/ &
1797	' -----------'/)
1798	331 FORMAT (/' 1D-Profiles:')
1799	332 FORMAT (/' ',A)
1800	333 FORMAT (' Output every ',F8.2,' s',/ &
1801	' Time averaged over ',F8.2,' s'/ &
1802	' Averaging input every ',F8.2,' s')
1803	334 FORMAT (/' 2D-Arrays',A,':')
1804	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1805	' Output every ',F8.2,' s ',A/ &
1806	' Cross sections at ',A1,' = ',A/ &
1807	' scalar-coordinates: ',A,' m'/)
1808	336 FORMAT (/' 3D-Arrays',A,':')
1809	337 FORMAT (/' Arrays: ',A/ &
1810	' Output every ',F8.2,' s ',A/ &
1811	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1812	338 FORMAT (' Compressed data output'/ &
1813	' Decimal precision: ',A/)
1814	339 FORMAT (' No output during initial ',F8.2,' s')
1815	340 FORMAT (/' Time series:')
1816	341 FORMAT (' Output every ',F8.2,' s'/)
1817	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1818	' Output every ',F8.2,' s ',A/ &
1819	' Time averaged over ',F8.2,' s'/ &
1820	' Averaging input every ',F8.2,' s'/ &
1821	' Cross sections at ',A1,' = ',A/ &
1822	' scalar-coordinates: ',A,' m'/)
1823	343 FORMAT (/' Arrays: ',A/ &
1824	' Output every ',F8.2,' s ',A/ &
1825	' Time averaged over ',F8.2,' s'/ &
1826	' Averaging input every ',F8.2,' s'/ &
1827	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1828	344 FORMAT (' Output format: ',A/)
1829	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1830	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1831	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1832	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1833	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1834	347 FORMAT (' Variables: ',A/ &
1835	' Output every ',F8.2,' s')
1836	348 FORMAT (' Variables: ',A/ &
1837	' Output every ',F8.2,' s'/ &
1838	' Time averaged over ',F8.2,' s'/ &
1839	' Averaging input every ',F8.2,' s')
1840	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1841	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1842	13(' ',8(F8.2,',')/) )
1843	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1844	'all gridpoints along ',A,'-direction (default).' )
1845	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1846	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1847	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1848	#if defined( __dvrp_graphics )
1849	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1850	' Output every ',F7.1,' s'/ &
1851	' Output mode: ',A/ &
1852	' Host / User: ',A,' / ',A/ &
1853	' Directory: ',A// &
1854	' The sequence contains:')
1855	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1856	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1857	362 FORMAT (/' Slicer plane ',A/ &
1858	' Slicer limits: [',F6.2,',',F6.2,']')
1859	363 FORMAT (/' Particles'/ &
1860	' particle size: ',F7.2,' m')
1861	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1862	F6.2,',',F6.2,']')
1863	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1864	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1865	')'/ &
1866	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1867	' from y = ',F9.1,' m to y = ',F9.1,' m')
1868	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1869	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1870	#endif
1871	#if defined( __spectra )
1872	370 FORMAT (' Spectra:')
1873	371 FORMAT (' Output every ',F7.1,' s'/)
1874	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1875	' Directions: ', 10(A5,',')/ &
1876	' height levels k = ', 20(I3,',')/ &
1877	' ', 20(I3,',')/ &
1878	' ', 20(I3,',')/ &
1879	' ', 20(I3,',')/ &
1880	' ', 19(I3,','),I3,'.'/ &
1881	' height levels selected for standard plot:'/ &
1882	' k = ', 20(I3,',')/ &
1883	' ', 20(I3,',')/ &
1884	' ', 20(I3,',')/ &
1885	' ', 20(I3,',')/ &
1886	' ', 19(I3,','),I3,'.'/ &
1887	' Time averaged over ', F7.1, ' s,' / &
1888	' Profiles for the time averaging are taken every ', &
1889	F6.1,' s')
1890	#endif
1891	400 FORMAT (//' Physical quantities:'/ &
1892	' -------------------'/)
1893	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1894	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1895	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1896	' f* = ',F9.6,' 1/s')
1897	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1898	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1899	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1900	415 FORMAT (/' Cloud physics parameters:'/ &
1901	' ------------------------'/)
1902	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1903	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1904	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1905	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1906	' Vapourization heat : L_v = ',E8.2,' J/kg')
1907	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1908	' Height: ',A,' m'/ &
1909	' Temperature: ',A,' K'/ &
1910	' Gradient: ',A,' K/100m'/ &
1911	' Gridpoint: ',A)
1912	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1913	' Height: ',A,' m'/ &
1914	' Humidity: ',A,' kg/kg'/ &
1915	' Gradient: ',A,' (kg/kg)/100m'/ &
1916	' Gridpoint: ',A)
1917	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1918	' Height: ',A,' m'/ &
1919	' Scalar concentration: ',A,' kg/m**3'/ &
1920	' Gradient: ',A,' (kg/m**3)/100m'/ &
1921	' Gridpoint: ',A)
1922	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1923	' Height: ',A,' m'/ &
1924	' ug: ',A,' m/s'/ &
1925	' Gradient: ',A,' 1/100s'/ &
1926	' Gridpoint: ',A)
1927	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1928	' Height: ',A,' m'/ &
1929	' vg: ',A,' m/s'/ &
1930	' Gradient: ',A,' 1/100s'/ &
1931	' Gridpoint: ',A)
1932	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1933	' Height: ',A,' m'/ &
1934	' Salinity: ',A,' psu'/ &
1935	' Gradient: ',A,' psu/100m'/ &
1936	' Gridpoint: ',A)
1937	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1938	' Height: ',A,' m'/ &
1939	' w_subs: ',A,' m/s'/ &
1940	' Gradient: ',A,' (m/s)/100m'/ &
1941	' Gridpoint: ',A)
1942	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1943	' profiles')
1944	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1945	' ----------------------------------'/)
1946	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1947	'on)')
1948	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1949	' total water content is used.'/ &
1950	' Condensation is parameterized via 0% - or 100% scheme.')
1951	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1952	'icle model')
1953	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1954	' droplets < 1.0E-6 m')
1955	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1956	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1957	'are used'/ &
1958	' number of radius classes: ',I3,' interval ', &
1959	'[1.0E-6,2.0E-4] m'/ &
1960	' number of dissipation classes: ',I2,' interval ', &
1961	'[0,1000] cm2/s3')
1962	437 FORMAT (' Droplet collision is switched off')
1963	450 FORMAT (//' LES / Turbulence quantities:'/ &
1964	' ---------------------------'/)
1965	451 FORMAT (' Diffusion coefficients are constant:'/ &
1966	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1967	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1968	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1969	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1970	470 FORMAT (//' Actions during the simulation:'/ &
1971	' -----------------------------'/)
1972	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1973	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1974	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1975	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1976	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1977	' to i/j =',I4)
1978	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1979	1X,F5.3, ' m2/s2')
1980	474 FORMAT (' Random number generator used : ',A/)
1981	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1982	'respectively, if'/ &
1983	' the value is negative) by ',F5.2,' K at the beginning of the',&
1984	' 3D-simulation'/)
1985	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1986	'respectively, if the'/ &
1987	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1988	' the 3D-simulation'/)
1989	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1990	'respectively, if the'/ &
1991	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1992	' the 3D-simulation'/)
1993	480 FORMAT (' Particles:'/ &
1994	' ---------'// &
1995	' Particle advection is active (switched on at t = ', F7.1, &
1996	' s)'/ &
1997	' Start of new particle generations every ',F6.1,' s'/ &
1998	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1999	' bottom: ', A, ' top: ', A/&
2000	' Maximum particle age: ',F9.1,' s'/ &
2001	' Advection stopped at t = ',F9.1,' s'/ &
2002	' Particles are sorted every ',F9.1,' s'/)
2003	481 FORMAT (' Particles have random start positions'/)
2004	482 FORMAT (' Particles are advected only horizontally'/)
2005	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2006	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2007	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2008	' Maximum age of the end of the tail: ',F8.2,' s')
2009	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2010	486 FORMAT (' Particle statistics are written on file'/)
2011	487 FORMAT (' Number of particle groups: ',I2/)
2012	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2013	' minimum timestep for advection: ', F7.5/)
2014	489 FORMAT (' Number of particles simultaneously released at each ', &
2015	'point: ', I5/)
2016	490 FORMAT (' Particle group ',I2,':'/ &
2017	' Particle radius: ',E10.3, 'm')
2018	491 FORMAT (' Particle inertia is activated'/ &
2019	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2020	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2021	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2022	' y:',F8.1,' - ',F8.1,' m'/&
2023	' z:',F8.1,' - ',F8.1,' m'/&
2024	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2025	' m dz = ',F8.1,' m'/)
2026	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2027	F8.2,' s'/)
2028	495 FORMAT (' Number of particles in total domain: ',I10/)
2029	500 FORMAT (//' 1D-Model parameters:'/ &
2030	' -------------------'// &
2031	' Simulation time: ',F8.1,' s'/ &
2032	' Run-controll output every: ',F8.1,' s'/ &
2033	' Vertical profile output every: ',F8.1,' s'/ &
2034	' Mixing length calculation: ',A/ &
2035	' Dissipation calculation: ',A/)
2036	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2037	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2038	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2039	505 FORMAT (' Precipitation parameterization via Seifert-Beheng-Scheme')
2040	506 FORMAT (' Drizzle parameterization via Stokes law')
2041	507 FORMAT (' Turbulence effects on precipitation process')
2042	508 FORMAT (' Ventilation effects on evaporation of rain drops')
2043	509 FORMAT (' Slope limiter used for sedimentation process')
2044	510 FORMAT (' Droplet density : N_c = ',F6.1,' 1/cm**3')
2045	511 FORMAT (' Sedimentation Courant number: '/&
2046	' C_s = ',F3.1,' ')
2047
2048	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |