Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1108

Last change on this file since 1108 was 1108, checked in by raasch, 12 years ago
bugfix for r1106 + coupled runs on lckyut/lckyuh
Property svn:keywords set to `Id`
File size: 76.7 KB

Line
1	SUBROUTINE header
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	! bugfix for r1106
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: header.f90 1108 2013-03-05 07:03:32Z raasch $
27	!
28	! 1106 2013-03-04 05:31:38Z raasch
29	! some format changes for coupled runs
30	!
31	! 1092 2013-02-02 11:24:22Z raasch
32	! unused variables removed
33	!
34	! 1036 2012-10-22 13:43:42Z raasch
35	! code put under GPL (PALM 3.9)
36	!
37	! 1031 2012-10-19 14:35:30Z raasch
38	! output of netCDF data format modified
39	!
40	! 1015 2012-09-27 09:23:24Z raasch
41	! output of Aajustment of mixing length to the Prandtl mixing length at first
42	! grid point above ground removed
43	!
44	! 1003 2012-09-14 14:35:53Z raasch
45	! output of information about equal/unequal subdomain size removed
46	!
47	! 1001 2012-09-13 14:08:46Z raasch
48	! all actions concerning leapfrog- and upstream-spline-scheme removed
49	!
50	! 978 2012-08-09 08:28:32Z fricke
51	! -km_damp_max, outflow_damping_width
52	! +pt_damping_factor, pt_damping_width
53	! +z0h
54	!
55	! 964 2012-07-26 09:14:24Z raasch
56	! output of profil-related quantities removed
57	!
58	! 940 2012-07-09 14:31:00Z raasch
59	! Output in case of simulations for pure neutral stratification (no pt-equation
60	! solved)
61	!
62	! 927 2012-06-06 19:15:04Z raasch
63	! output of masking_method for mg-solver
64	!
65	! 868 2012-03-28 12:21:07Z raasch
66	! translation velocity in Galilean transformation changed to 0.6 * ug
67	!
68	! 833 2012-02-22 08:55:55Z maronga
69	! Adjusted format for leaf area density
70	!
71	! 828 2012-02-21 12:00:36Z raasch
72	! output of dissipation_classes + radius_classes
73	!
74	! 825 2012-02-19 03:03:44Z raasch
75	! Output of cloud physics parameters/quantities complemented and restructured
76	!
77	! 767 2011-10-14 06:39:12Z raasch
78	! Output of given initial u,v-profiles
79	!
80	! 759 2011-09-15 13:58:31Z raasch
81	! output of maximum number of parallel io streams
82	!
83	! 707 2011-03-29 11:39:40Z raasch
84	! bc_lr/ns replaced by bc_lr/ns_cyc
85	!
86	! 667 2010-12-23 12:06:00Z suehring/gryschka
87	! Output of advection scheme.
88	! Modified output of Prandtl-layer height.
89	!
90	! 580 2010-10-05 13:59:11Z heinze
91	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
92	! ws_vertical_gradient_level to subs_vertical_gradient_level and
93	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
94	!
95	! 493 2010-03-01 08:30:24Z raasch
96	! NetCDF data output format extendend for NetCDF4/HDF5
97	!
98	! 449 2010-02-02 11:23:59Z raasch
99	! +large scale vertical motion (subsidence/ascent)
100	! Bugfix: index problem concerning gradient_level indices removed
101	!
102	! 410 2009-12-04 17:05:40Z letzel
103	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
104	! mask_scale\|_x\|y\|z, masks, skip_time_domask
105	!
106	! 346 2009-07-06 10:13:41Z raasch
107	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
108	! Coupling with independent precursor runs.
109	! Output of messages replaced by message handling routine.
110	! Output of several additional dvr parameters
111	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
112	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
113	! dp_smooth, dpdxy, u_bulk, v_bulk
114	! topography_grid_convention moved from user_header
115	! small bugfix concerning 3d 64bit netcdf output format
116	!
117	! 206 2008-10-13 14:59:11Z raasch
118	! Bugfix: error in zu index in case of section_xy = -1
119	!
120	! 198 2008-09-17 08:55:28Z raasch
121	! Format adjustments allowing output of larger revision numbers
122	!
123	! 197 2008-09-16 15:29:03Z raasch
124	! allow 100 spectra levels instead of 10 for consistency with
125	! define_netcdf_header,
126	! bugfix in the output of the characteristic levels of potential temperature,
127	! geostrophic wind, scalar concentration, humidity and leaf area density,
128	! output of turbulence recycling informations
129	!
130	! 138 2007-11-28 10:03:58Z letzel
131	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
132	! Allow two instead of one digit to specify isosurface and slicer variables.
133	! Output of sorting frequency of particles
134	!
135	! 108 2007-08-24 15:10:38Z letzel
136	! Output of informations for coupled model runs (boundary conditions etc.)
137	! + output of momentumfluxes at the top boundary
138	! Rayleigh damping for ocean, e_init
139	!
140	! 97 2007-06-21 08:23:15Z raasch
141	! Adjustments for the ocean version.
142	! use_pt_reference renamed use_reference
143	!
144	! 87 2007-05-22 15:46:47Z raasch
145	! Bugfix: output of use_upstream_for_tke
146	!
147	! 82 2007-04-16 15:40:52Z raasch
148	! Preprocessor strings for different linux clusters changed to "lc",
149	! routine local_flush is used for buffer flushing
150	!
151	! 76 2007-03-29 00:58:32Z raasch
152	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
153	! output of the loop optimization method, moisture renamed humidity,
154	! output of subversion revision number
155	!
156	! 19 2007-02-23 04:53:48Z raasch
157	! Output of scalar flux applied at top boundary
158	!
159	! RCS Log replace by Id keyword, revision history cleaned up
160	!
161	! Revision 1.63 2006/08/22 13:53:13 raasch
162	! Output of dz_max
163	!
164	! Revision 1.1 1997/08/11 06:17:20 raasch
165	! Initial revision
166	!
167	!
168	! Description:
169	! ------------
170	! Writing a header with all important informations about the actual run.
171	! This subroutine is called three times, two times at the beginning
172	! (writing information on files RUN_CONTROL and HEADER) and one time at the
173	! end of the run, then writing additional information about CPU-usage on file
174	! header.
175	!-----------------------------------------------------------------------------!
176
177	USE arrays_3d
178	USE control_parameters
179	USE cloud_parameters
180	USE cpulog
181	USE dvrp_variables
182	USE grid_variables
183	USE indices
184	USE model_1d
185	USE particle_attributes
186	USE pegrid
187	USE subsidence_mod
188	USE spectrum
189
190	IMPLICIT NONE
191
192	CHARACTER (LEN=1) :: prec
193	CHARACTER (LEN=2) :: do2d_mode
194	CHARACTER (LEN=5) :: section_chr
195	CHARACTER (LEN=10) :: coor_chr, host_chr
196	CHARACTER (LEN=16) :: begin_chr
197	CHARACTER (LEN=26) :: ver_rev
198	CHARACTER (LEN=40) :: output_format
199	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
200	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
201	domask_chr, run_classification
202	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
203	temperatures, ugcomponent, vgcomponent
204	CHARACTER (LEN=85) :: roben, runten
205
206	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
207
208	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
209	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
210	REAL :: cpuseconds_per_simulated_second
211
212	!
213	!-- Open the output file. At the end of the simulation, output is directed
214	!-- to unit 19.
215	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
216	.NOT. simulated_time_at_begin /= simulated_time ) THEN
217	io = 15 ! header output on file RUN_CONTROL
218	ELSE
219	io = 19 ! header output on file HEADER
220	ENDIF
221	CALL check_open( io )
222
223	!
224	!-- At the end of the run, output file (HEADER) will be rewritten with
225	!-- new informations
226	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
227
228	!
229	!-- Determine kind of model run
230	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
231	run_classification = '3D - restart run'
232	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
233	run_classification = '3D - run with cyclic fill of 3D - prerun data'
234	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
235	run_classification = '3D - run without 1D - prerun'
236	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
237	run_classification = '3D - run with 1D - prerun'
238	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
239	run_classification = '3D - run initialized by user'
240	ELSE
241	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
242	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
243	ENDIF
244	IF ( ocean ) THEN
245	run_classification = 'ocean - ' // run_classification
246	ELSE
247	run_classification = 'atmosphere - ' // run_classification
248	ENDIF
249
250	!
251	!-- Run-identification, date, time, host
252	host_chr = host(1:10)
253	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
254	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
255	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
256	#if defined( __mpi2 )
257	mpi_type = 2
258	#else
259	mpi_type = 1
260	#endif
261	WRITE ( io, 101 ) mpi_type, coupling_mode
262	ENDIF
263	#if defined( __parallel )
264	IF ( coupling_start_time /= 0.0 ) THEN
265	IF ( coupling_start_time > simulated_time_at_begin ) THEN
266	WRITE ( io, 109 )
267	ELSE
268	WRITE ( io, 114 )
269	ENDIF
270	ENDIF
271	#endif
272	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
273	ADJUSTR( host_chr )
274	#if defined( __parallel )
275	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
276	char1 = 'calculated'
277	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
278	host(1:2) == 'lc' ) .AND. &
279	npex == -1 .AND. pdims(2) == 1 ) THEN
280	char1 = 'forced'
281	ELSE
282	char1 = 'predefined'
283	ENDIF
284	IF ( threads_per_task == 1 ) THEN
285	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
286	ELSE
287	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
288	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
289	ENDIF
290	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
291	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
292	npex == -1 .AND. pdims(2) == 1 ) &
293	THEN
294	WRITE ( io, 106 )
295	ELSEIF ( pdims(2) == 1 ) THEN
296	WRITE ( io, 107 ) 'x'
297	ELSEIF ( pdims(1) == 1 ) THEN
298	WRITE ( io, 107 ) 'y'
299	ENDIF
300	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
301	IF ( numprocs /= maximum_parallel_io_streams ) THEN
302	WRITE ( io, 108 ) maximum_parallel_io_streams
303	ENDIF
304	#endif
305	WRITE ( io, 99 )
306
307	!
308	!-- Numerical schemes
309	WRITE ( io, 110 )
310	IF ( psolver(1:7) == 'poisfft' ) THEN
311	WRITE ( io, 111 ) TRIM( fft_method )
312	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
313	ELSEIF ( psolver == 'sor' ) THEN
314	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
315	ELSEIF ( psolver == 'multigrid' ) THEN
316	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
317	IF ( mg_cycles == -1 ) THEN
318	WRITE ( io, 140 ) residual_limit
319	ELSE
320	WRITE ( io, 141 ) mg_cycles
321	ENDIF
322	IF ( mg_switch_to_pe0_level == 0 ) THEN
323	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
324	nzt_mg(1)
325	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
326	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
327	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
328	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
329	nzt_mg(mg_switch_to_pe0_level), &
330	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
331	nzt_mg(1)
332	ENDIF
333	IF ( masking_method ) WRITE ( io, 144 )
334	ENDIF
335	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
336	THEN
337	WRITE ( io, 142 )
338	ENDIF
339
340	IF ( momentum_advec == 'pw-scheme' ) THEN
341	WRITE ( io, 113 )
342	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
343	WRITE ( io, 503 )
344	ENDIF
345	IF ( scalar_advec == 'pw-scheme' ) THEN
346	WRITE ( io, 116 )
347	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
348	WRITE ( io, 504 )
349	ELSE
350	WRITE ( io, 118 )
351	ENDIF
352
353	WRITE ( io, 139 ) TRIM( loop_optimization )
354
355	IF ( galilei_transformation ) THEN
356	IF ( use_ug_for_galilei_tr ) THEN
357	char1 = '0.6 * geostrophic wind'
358	ELSE
359	char1 = 'mean wind in model domain'
360	ENDIF
361	IF ( simulated_time_at_begin == simulated_time ) THEN
362	char2 = 'at the start of the run'
363	ELSE
364	char2 = 'at the end of the run'
365	ENDIF
366	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
367	advected_distance_x/1000.0, advected_distance_y/1000.0
368	ENDIF
369	WRITE ( io, 122 ) timestep_scheme
370	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
371	IF ( rayleigh_damping_factor /= 0.0 ) THEN
372	IF ( .NOT. ocean ) THEN
373	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
374	rayleigh_damping_factor
375	ELSE
376	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
377	rayleigh_damping_factor
378	ENDIF
379	ENDIF
380	IF ( neutral ) WRITE ( io, 131 ) pt_surface
381	IF ( humidity ) THEN
382	IF ( .NOT. cloud_physics ) THEN
383	WRITE ( io, 129 )
384	ELSE
385	WRITE ( io, 130 )
386	ENDIF
387	ENDIF
388	IF ( passive_scalar ) WRITE ( io, 134 )
389	IF ( conserve_volume_flow ) THEN
390	WRITE ( io, 150 ) conserve_volume_flow_mode
391	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
392	WRITE ( io, 151 ) u_bulk, v_bulk
393	ENDIF
394	ELSEIF ( dp_external ) THEN
395	IF ( dp_smooth ) THEN
396	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
397	ELSE
398	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
399	ENDIF
400	ENDIF
401	IF ( large_scale_subsidence ) THEN
402	WRITE ( io, 153 )
403	WRITE ( io, 154 )
404	ENDIF
405	WRITE ( io, 99 )
406
407	!
408	!-- Runtime and timestep informations
409	WRITE ( io, 200 )
410	IF ( .NOT. dt_fixed ) THEN
411	WRITE ( io, 201 ) dt_max, cfl_factor
412	ELSE
413	WRITE ( io, 202 ) dt
414	ENDIF
415	WRITE ( io, 203 ) simulated_time_at_begin, end_time
416
417	IF ( time_restart /= 9999999.9 .AND. &
418	simulated_time_at_begin == simulated_time ) THEN
419	IF ( dt_restart == 9999999.9 ) THEN
420	WRITE ( io, 204 ) ' Restart at: ',time_restart
421	ELSE
422	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
423	ENDIF
424	ENDIF
425
426	IF ( simulated_time_at_begin /= simulated_time ) THEN
427	i = MAX ( log_point_s(10)%counts, 1 )
428	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
429	cpuseconds_per_simulated_second = 0.0
430	ELSE
431	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
432	( simulated_time - &
433	simulated_time_at_begin )
434	ENDIF
435	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
436	log_point_s(10)%sum / REAL( i ), &
437	cpuseconds_per_simulated_second
438	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
439	IF ( dt_restart == 9999999.9 ) THEN
440	WRITE ( io, 204 ) ' Next restart at: ',time_restart
441	ELSE
442	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
443	ENDIF
444	ENDIF
445	ENDIF
446
447	!
448	!-- Start time for coupled runs, if independent precursor runs for atmosphere
449	!-- and ocean are used or have been used. In this case, coupling_start_time
450	!-- defines the time when the coupling is switched on.
451	IF ( coupling_start_time /= 0.0 ) THEN
452	WRITE ( io, 207 ) coupling_start_time
453	ENDIF
454
455	!
456	!-- Computational grid
457	IF ( .NOT. ocean ) THEN
458	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
459	IF ( dz_stretch_level_index < nzt+1 ) THEN
460	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
461	dz_stretch_factor, dz_max
462	ENDIF
463	ELSE
464	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
465	IF ( dz_stretch_level_index > 0 ) THEN
466	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
467	dz_stretch_factor, dz_max
468	ENDIF
469	ENDIF
470	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
471	MIN( nnz+2, nzt+2 )
472	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
473
474	!
475	!-- Topography
476	WRITE ( io, 270 ) topography
477	SELECT CASE ( TRIM( topography ) )
478
479	CASE ( 'flat' )
480	! no actions necessary
481
482	CASE ( 'single_building' )
483	blx = INT( building_length_x / dx )
484	bly = INT( building_length_y / dy )
485	bh = INT( building_height / dz )
486
487	IF ( building_wall_left == 9999999.9 ) THEN
488	building_wall_left = ( nx + 1 - blx ) / 2 * dx
489	ENDIF
490	bxl = INT ( building_wall_left / dx + 0.5 )
491	bxr = bxl + blx
492
493	IF ( building_wall_south == 9999999.9 ) THEN
494	building_wall_south = ( ny + 1 - bly ) / 2 * dy
495	ENDIF
496	bys = INT ( building_wall_south / dy + 0.5 )
497	byn = bys + bly
498
499	WRITE ( io, 271 ) building_length_x, building_length_y, &
500	building_height, bxl, bxr, bys, byn
501
502	CASE ( 'single_street_canyon' )
503	ch = NINT( canyon_height / dz )
504	IF ( canyon_width_x /= 9999999.9 ) THEN
505	!
506	!-- Street canyon in y direction
507	cwx = NINT( canyon_width_x / dx )
508	IF ( canyon_wall_left == 9999999.9 ) THEN
509	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
510	ENDIF
511	cxl = NINT( canyon_wall_left / dx )
512	cxr = cxl + cwx
513	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
514
515	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
516	!
517	!-- Street canyon in x direction
518	cwy = NINT( canyon_width_y / dy )
519	IF ( canyon_wall_south == 9999999.9 ) THEN
520	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
521	ENDIF
522	cys = NINT( canyon_wall_south / dy )
523	cyn = cys + cwy
524	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
525	ENDIF
526
527	END SELECT
528
529	IF ( TRIM( topography ) /= 'flat' ) THEN
530	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
531	IF ( TRIM( topography ) == 'single_building' .OR. &
532	TRIM( topography ) == 'single_street_canyon' ) THEN
533	WRITE ( io, 278 )
534	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
535	WRITE ( io, 279 )
536	ENDIF
537	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
538	WRITE ( io, 278 )
539	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
540	WRITE ( io, 279 )
541	ENDIF
542	ENDIF
543
544	IF ( plant_canopy ) THEN
545
546	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
547	IF ( passive_scalar ) THEN
548	WRITE ( io, 281 ) scalar_exchange_coefficient, &
549	leaf_surface_concentration
550	ENDIF
551
552	!
553	!-- Heat flux at the top of vegetation
554	WRITE ( io, 282 ) cthf
555
556	!
557	!-- Leaf area density profile
558	!-- Building output strings, starting with surface value
559	WRITE ( learde, '(F6.4)' ) lad_surface
560	gradients = '------'
561	slices = ' 0'
562	coordinates = ' 0.0'
563	i = 1
564	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
565
566	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
567	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
568
569	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
570	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
571
572	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
573	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
574
575	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
576	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
577
578	i = i + 1
579	ENDDO
580
581	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
582	TRIM( gradients ), TRIM( slices )
583
584	ENDIF
585
586	!
587	!-- Boundary conditions
588	IF ( ibc_p_b == 0 ) THEN
589	runten = 'p(0) = 0 \|'
590	ELSEIF ( ibc_p_b == 1 ) THEN
591	runten = 'p(0) = p(1) \|'
592	ELSE
593	runten = 'p(0) = p(1) +R\|'
594	ENDIF
595	IF ( ibc_p_t == 0 ) THEN
596	roben = 'p(nzt+1) = 0 \|'
597	ELSE
598	roben = 'p(nzt+1) = p(nzt) \|'
599	ENDIF
600
601	IF ( ibc_uv_b == 0 ) THEN
602	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
603	ELSE
604	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
605	ENDIF
606	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
607	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
608	ELSEIF ( ibc_uv_t == 0 ) THEN
609	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
610	ELSE
611	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
612	ENDIF
613
614	IF ( ibc_pt_b == 0 ) THEN
615	runten = TRIM( runten ) // ' pt(0) = pt_surface'
616	ELSEIF ( ibc_pt_b == 1 ) THEN
617	runten = TRIM( runten ) // ' pt(0) = pt(1)'
618	ELSEIF ( ibc_pt_b == 2 ) THEN
619	runten = TRIM( runten ) // ' pt(0) = from coupled model'
620	ENDIF
621	IF ( ibc_pt_t == 0 ) THEN
622	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
623	ELSEIF( ibc_pt_t == 1 ) THEN
624	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
625	ELSEIF( ibc_pt_t == 2 ) THEN
626	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
627
628	ENDIF
629
630	WRITE ( io, 300 ) runten, roben
631
632	IF ( .NOT. constant_diffusion ) THEN
633	IF ( ibc_e_b == 1 ) THEN
634	runten = 'e(0) = e(1)'
635	ELSE
636	runten = 'e(0) = e(1) = (u/0.1)*2'
637	ENDIF
638	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
639
640	WRITE ( io, 301 ) 'e', runten, roben
641
642	ENDIF
643
644	IF ( ocean ) THEN
645	runten = 'sa(0) = sa(1)'
646	IF ( ibc_sa_t == 0 ) THEN
647	roben = 'sa(nzt+1) = sa_surface'
648	ELSE
649	roben = 'sa(nzt+1) = sa(nzt)'
650	ENDIF
651	WRITE ( io, 301 ) 'sa', runten, roben
652	ENDIF
653
654	IF ( humidity ) THEN
655	IF ( ibc_q_b == 0 ) THEN
656	runten = 'q(0) = q_surface'
657	ELSE
658	runten = 'q(0) = q(1)'
659	ENDIF
660	IF ( ibc_q_t == 0 ) THEN
661	roben = 'q(nzt) = q_top'
662	ELSE
663	roben = 'q(nzt) = q(nzt-1) + dq/dz'
664	ENDIF
665	WRITE ( io, 301 ) 'q', runten, roben
666	ENDIF
667
668	IF ( passive_scalar ) THEN
669	IF ( ibc_q_b == 0 ) THEN
670	runten = 's(0) = s_surface'
671	ELSE
672	runten = 's(0) = s(1)'
673	ENDIF
674	IF ( ibc_q_t == 0 ) THEN
675	roben = 's(nzt) = s_top'
676	ELSE
677	roben = 's(nzt) = s(nzt-1) + ds/dz'
678	ENDIF
679	WRITE ( io, 301 ) 's', runten, roben
680	ENDIF
681
682	IF ( use_surface_fluxes ) THEN
683	WRITE ( io, 303 )
684	IF ( constant_heatflux ) THEN
685	WRITE ( io, 306 ) surface_heatflux
686	IF ( random_heatflux ) WRITE ( io, 307 )
687	ENDIF
688	IF ( humidity .AND. constant_waterflux ) THEN
689	WRITE ( io, 311 ) surface_waterflux
690	ENDIF
691	IF ( passive_scalar .AND. constant_waterflux ) THEN
692	WRITE ( io, 313 ) surface_waterflux
693	ENDIF
694	ENDIF
695
696	IF ( use_top_fluxes ) THEN
697	WRITE ( io, 304 )
698	IF ( coupling_mode == 'uncoupled' ) THEN
699	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
700	IF ( constant_top_heatflux ) THEN
701	WRITE ( io, 306 ) top_heatflux
702	ENDIF
703	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
704	WRITE ( io, 316 )
705	ENDIF
706	IF ( ocean .AND. constant_top_salinityflux ) THEN
707	WRITE ( io, 309 ) top_salinityflux
708	ENDIF
709	IF ( humidity .OR. passive_scalar ) THEN
710	WRITE ( io, 315 )
711	ENDIF
712	ENDIF
713
714	IF ( prandtl_layer ) THEN
715	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
716	z0h_factor*roughness_length, kappa, &
717	rif_min, rif_max
718	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
719	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
720	WRITE ( io, 312 )
721	ENDIF
722	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
723	WRITE ( io, 314 )
724	ENDIF
725	ELSE
726	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
727	WRITE ( io, 310 ) rif_min, rif_max
728	ENDIF
729	ENDIF
730
731	WRITE ( io, 317 ) bc_lr, bc_ns
732	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
733	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
734	IF ( turbulent_inflow ) THEN
735	WRITE ( io, 319 ) recycling_width, recycling_plane, &
736	inflow_damping_height, inflow_damping_width
737	ENDIF
738	ENDIF
739
740	!
741	!-- Listing of 1D-profiles
742	WRITE ( io, 325 ) dt_dopr_listing
743	IF ( averaging_interval_pr /= 0.0 ) THEN
744	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
745	ENDIF
746
747	!
748	!-- DATA output
749	WRITE ( io, 330 )
750	IF ( averaging_interval_pr /= 0.0 ) THEN
751	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
752	ENDIF
753
754	!
755	!-- 1D-profiles
756	dopr_chr = 'Profile:'
757	IF ( dopr_n /= 0 ) THEN
758	WRITE ( io, 331 )
759
760	output_format = ''
761	IF ( netcdf_output ) THEN
762	output_format = output_format_netcdf
763	ENDIF
764	WRITE ( io, 344 ) output_format
765
766	DO i = 1, dopr_n
767	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
768	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
769	WRITE ( io, 332 ) dopr_chr
770	dopr_chr = ' :'
771	ENDIF
772	ENDDO
773
774	IF ( dopr_chr /= '' ) THEN
775	WRITE ( io, 332 ) dopr_chr
776	ENDIF
777	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
778	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
779	ENDIF
780
781	!
782	!-- 2D-arrays
783	DO av = 0, 1
784
785	i = 1
786	do2d_xy = ''
787	do2d_xz = ''
788	do2d_yz = ''
789	DO WHILE ( do2d(av,i) /= ' ' )
790
791	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
792	do2d_mode = do2d(av,i)(l-1:l)
793
794	SELECT CASE ( do2d_mode )
795	CASE ( 'xy' )
796	ll = LEN_TRIM( do2d_xy )
797	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
798	CASE ( 'xz' )
799	ll = LEN_TRIM( do2d_xz )
800	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
801	CASE ( 'yz' )
802	ll = LEN_TRIM( do2d_yz )
803	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
804	END SELECT
805
806	i = i + 1
807
808	ENDDO
809
810	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
811	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
812	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
813	( netcdf_output .OR. iso2d_output ) ) THEN
814
815	IF ( av == 0 ) THEN
816	WRITE ( io, 334 ) ''
817	ELSE
818	WRITE ( io, 334 ) '(time-averaged)'
819	ENDIF
820
821	IF ( do2d_at_begin ) THEN
822	begin_chr = 'and at the start'
823	ELSE
824	begin_chr = ''
825	ENDIF
826
827	output_format = ''
828	IF ( netcdf_output ) THEN
829	output_format = output_format_netcdf
830	ENDIF
831	IF ( iso2d_output ) THEN
832	IF ( netcdf_output ) THEN
833	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
834	ELSE
835	output_format = 'iso2d'
836	ENDIF
837	ENDIF
838	WRITE ( io, 344 ) output_format
839
840	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
841	i = 1
842	slices = '/'
843	coordinates = '/'
844	!
845	!-- Building strings with index and coordinate informations of the
846	!-- slices
847	DO WHILE ( section(i,1) /= -9999 )
848
849	WRITE (section_chr,'(I5)') section(i,1)
850	section_chr = ADJUSTL( section_chr )
851	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
852
853	IF ( section(i,1) == -1 ) THEN
854	WRITE (coor_chr,'(F10.1)') -1.0
855	ELSE
856	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
857	ENDIF
858	coor_chr = ADJUSTL( coor_chr )
859	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
860
861	i = i + 1
862	ENDDO
863	IF ( av == 0 ) THEN
864	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
865	TRIM( begin_chr ), 'k', TRIM( slices ), &
866	TRIM( coordinates )
867	IF ( skip_time_do2d_xy /= 0.0 ) THEN
868	WRITE ( io, 339 ) skip_time_do2d_xy
869	ENDIF
870	ELSE
871	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
872	TRIM( begin_chr ), averaging_interval, &
873	dt_averaging_input, 'k', TRIM( slices ), &
874	TRIM( coordinates )
875	IF ( skip_time_data_output_av /= 0.0 ) THEN
876	WRITE ( io, 339 ) skip_time_data_output_av
877	ENDIF
878	ENDIF
879
880	ENDIF
881
882	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
883	i = 1
884	slices = '/'
885	coordinates = '/'
886	!
887	!-- Building strings with index and coordinate informations of the
888	!-- slices
889	DO WHILE ( section(i,2) /= -9999 )
890
891	WRITE (section_chr,'(I5)') section(i,2)
892	section_chr = ADJUSTL( section_chr )
893	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
894
895	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
896	coor_chr = ADJUSTL( coor_chr )
897	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
898
899	i = i + 1
900	ENDDO
901	IF ( av == 0 ) THEN
902	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
903	TRIM( begin_chr ), 'j', TRIM( slices ), &
904	TRIM( coordinates )
905	IF ( skip_time_do2d_xz /= 0.0 ) THEN
906	WRITE ( io, 339 ) skip_time_do2d_xz
907	ENDIF
908	ELSE
909	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
910	TRIM( begin_chr ), averaging_interval, &
911	dt_averaging_input, 'j', TRIM( slices ), &
912	TRIM( coordinates )
913	IF ( skip_time_data_output_av /= 0.0 ) THEN
914	WRITE ( io, 339 ) skip_time_data_output_av
915	ENDIF
916	ENDIF
917	ENDIF
918
919	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
920	i = 1
921	slices = '/'
922	coordinates = '/'
923	!
924	!-- Building strings with index and coordinate informations of the
925	!-- slices
926	DO WHILE ( section(i,3) /= -9999 )
927
928	WRITE (section_chr,'(I5)') section(i,3)
929	section_chr = ADJUSTL( section_chr )
930	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
931
932	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
933	coor_chr = ADJUSTL( coor_chr )
934	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
935
936	i = i + 1
937	ENDDO
938	IF ( av == 0 ) THEN
939	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
940	TRIM( begin_chr ), 'i', TRIM( slices ), &
941	TRIM( coordinates )
942	IF ( skip_time_do2d_yz /= 0.0 ) THEN
943	WRITE ( io, 339 ) skip_time_do2d_yz
944	ENDIF
945	ELSE
946	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
947	TRIM( begin_chr ), averaging_interval, &
948	dt_averaging_input, 'i', TRIM( slices ), &
949	TRIM( coordinates )
950	IF ( skip_time_data_output_av /= 0.0 ) THEN
951	WRITE ( io, 339 ) skip_time_data_output_av
952	ENDIF
953	ENDIF
954	ENDIF
955
956	ENDIF
957
958	ENDDO
959
960	!
961	!-- 3d-arrays
962	DO av = 0, 1
963
964	i = 1
965	do3d_chr = ''
966	DO WHILE ( do3d(av,i) /= ' ' )
967
968	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
969	i = i + 1
970
971	ENDDO
972
973	IF ( do3d_chr /= '' ) THEN
974	IF ( av == 0 ) THEN
975	WRITE ( io, 336 ) ''
976	ELSE
977	WRITE ( io, 336 ) '(time-averaged)'
978	ENDIF
979
980	output_format = ''
981	IF ( netcdf_output ) THEN
982	output_format = output_format_netcdf
983	ENDIF
984	IF ( avs_output ) THEN
985	IF ( netcdf_output ) THEN
986	output_format = TRIM( output_format_netcdf ) // ' and avs'
987	ELSE
988	output_format = 'avs'
989	ENDIF
990	ENDIF
991	WRITE ( io, 344 ) output_format
992
993	IF ( do3d_at_begin ) THEN
994	begin_chr = 'and at the start'
995	ELSE
996	begin_chr = ''
997	ENDIF
998	IF ( av == 0 ) THEN
999	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1000	zu(nz_do3d), nz_do3d
1001	ELSE
1002	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1003	TRIM( begin_chr ), averaging_interval, &
1004	dt_averaging_input, zu(nz_do3d), nz_do3d
1005	ENDIF
1006
1007	IF ( do3d_compress ) THEN
1008	do3d_chr = ''
1009	i = 1
1010	DO WHILE ( do3d(av,i) /= ' ' )
1011
1012	SELECT CASE ( do3d(av,i) )
1013	CASE ( 'u' )
1014	j = 1
1015	CASE ( 'v' )
1016	j = 2
1017	CASE ( 'w' )
1018	j = 3
1019	CASE ( 'p' )
1020	j = 4
1021	CASE ( 'pt' )
1022	j = 5
1023	END SELECT
1024	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1025	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1026	':' // prec // ','
1027	i = i + 1
1028
1029	ENDDO
1030	WRITE ( io, 338 ) do3d_chr
1031
1032	ENDIF
1033
1034	IF ( av == 0 ) THEN
1035	IF ( skip_time_do3d /= 0.0 ) THEN
1036	WRITE ( io, 339 ) skip_time_do3d
1037	ENDIF
1038	ELSE
1039	IF ( skip_time_data_output_av /= 0.0 ) THEN
1040	WRITE ( io, 339 ) skip_time_data_output_av
1041	ENDIF
1042	ENDIF
1043
1044	ENDIF
1045
1046	ENDDO
1047
1048	!
1049	!-- masked arrays
1050	IF ( masks > 0 ) WRITE ( io, 345 ) &
1051	mask_scale_x, mask_scale_y, mask_scale_z
1052	DO mid = 1, masks
1053	DO av = 0, 1
1054
1055	i = 1
1056	domask_chr = ''
1057	DO WHILE ( domask(mid,av,i) /= ' ' )
1058	domask_chr = TRIM( domask_chr ) // ' ' // &
1059	TRIM( domask(mid,av,i) ) // ','
1060	i = i + 1
1061	ENDDO
1062
1063	IF ( domask_chr /= '' ) THEN
1064	IF ( av == 0 ) THEN
1065	WRITE ( io, 346 ) '', mid
1066	ELSE
1067	WRITE ( io, 346 ) ' (time-averaged)', mid
1068	ENDIF
1069
1070	output_format = ' '
1071	IF ( netcdf_output ) THEN
1072	output_format = output_format_netcdf
1073	ENDIF
1074	WRITE ( io, 344 ) output_format
1075
1076	IF ( av == 0 ) THEN
1077	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1078	ELSE
1079	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1080	averaging_interval, dt_averaging_input
1081	ENDIF
1082
1083	IF ( av == 0 ) THEN
1084	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1085	WRITE ( io, 339 ) skip_time_domask(mid)
1086	ENDIF
1087	ELSE
1088	IF ( skip_time_data_output_av /= 0.0 ) THEN
1089	WRITE ( io, 339 ) skip_time_data_output_av
1090	ENDIF
1091	ENDIF
1092	!
1093	!-- output locations
1094	DO dim = 1, 3
1095	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1096	count = 0
1097	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1098	count = count + 1
1099	ENDDO
1100	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1101	mask(mid,dim,:count)
1102	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1103	mask_loop(mid,dim,2) < 0.0 .AND. &
1104	mask_loop(mid,dim,3) == 0.0 ) THEN
1105	WRITE ( io, 350 ) dir(dim), dir(dim)
1106	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1107	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1108	mask_loop(mid,dim,1:2)
1109	ELSE
1110	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1111	mask_loop(mid,dim,1:3)
1112	ENDIF
1113	ENDDO
1114	ENDIF
1115
1116	ENDDO
1117	ENDDO
1118
1119	!
1120	!-- Timeseries
1121	IF ( dt_dots /= 9999999.9 ) THEN
1122	WRITE ( io, 340 )
1123
1124	output_format = ''
1125	IF ( netcdf_output ) THEN
1126	output_format = output_format_netcdf
1127	ENDIF
1128	WRITE ( io, 344 ) output_format
1129	WRITE ( io, 341 ) dt_dots
1130	ENDIF
1131
1132	#if defined( __dvrp_graphics )
1133	!
1134	!-- Dvrp-output
1135	IF ( dt_dvrp /= 9999999.9 ) THEN
1136	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1137	TRIM( dvrp_username ), TRIM( dvrp_directory )
1138	i = 1
1139	l = 0
1140	m = 0
1141	DO WHILE ( mode_dvrp(i) /= ' ' )
1142	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1143	READ ( mode_dvrp(i), '(10X,I2)' ) j
1144	l = l + 1
1145	IF ( do3d(0,j) /= ' ' ) THEN
1146	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1147	isosurface_color(:,l)
1148	ENDIF
1149	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1150	READ ( mode_dvrp(i), '(6X,I2)' ) j
1151	m = m + 1
1152	IF ( do2d(0,j) /= ' ' ) THEN
1153	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1154	slicer_range_limits_dvrp(:,m)
1155	ENDIF
1156	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1157	WRITE ( io, 363 ) dvrp_psize
1158	IF ( particle_dvrpsize /= 'none' ) THEN
1159	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1160	dvrpsize_interval
1161	ENDIF
1162	IF ( particle_color /= 'none' ) THEN
1163	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1164	color_interval
1165	ENDIF
1166	ENDIF
1167	i = i + 1
1168	ENDDO
1169
1170	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1171	superelevation_y, superelevation, clip_dvrp_l, &
1172	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1173
1174	IF ( TRIM( topography ) /= 'flat' ) THEN
1175	WRITE ( io, 366 ) topography_color
1176	IF ( cluster_size > 1 ) THEN
1177	WRITE ( io, 367 ) cluster_size
1178	ENDIF
1179	ENDIF
1180
1181	ENDIF
1182	#endif
1183
1184	#if defined( __spectra )
1185	!
1186	!-- Spectra output
1187	IF ( dt_dosp /= 9999999.9 ) THEN
1188	WRITE ( io, 370 )
1189
1190	output_format = ' '
1191	IF ( netcdf_output ) THEN
1192	output_format = output_format_netcdf
1193	ENDIF
1194	WRITE ( io, 344 ) output_format
1195	WRITE ( io, 371 ) dt_dosp
1196	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1197	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1198	( spectra_direction(i), i = 1,10 ), &
1199	( comp_spectra_level(i), i = 1,100 ), &
1200	( plot_spectra_level(i), i = 1,100 ), &
1201	averaging_interval_sp, dt_averaging_input_pr
1202	ENDIF
1203	#endif
1204
1205	WRITE ( io, 99 )
1206
1207	!
1208	!-- Physical quantities
1209	WRITE ( io, 400 )
1210
1211	!
1212	!-- Geostrophic parameters
1213	WRITE ( io, 410 ) omega, phi, f, fs
1214
1215	!
1216	!-- Other quantities
1217	WRITE ( io, 411 ) g
1218	IF ( use_reference ) THEN
1219	IF ( ocean ) THEN
1220	WRITE ( io, 412 ) prho_reference
1221	ELSE
1222	WRITE ( io, 413 ) pt_reference
1223	ENDIF
1224	ENDIF
1225
1226	!
1227	!-- Cloud physics parameters
1228	IF ( cloud_physics ) THEN
1229	WRITE ( io, 415 )
1230	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1231	ENDIF
1232
1233	!-- Profile of the geostrophic wind (component ug)
1234	!-- Building output strings
1235	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1236	gradients = '------'
1237	slices = ' 0'
1238	coordinates = ' 0.0'
1239	i = 1
1240	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1241
1242	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1243	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1244
1245	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1246	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1247
1248	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1249	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1250
1251	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1252	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1253
1254	IF ( i == 10 ) THEN
1255	EXIT
1256	ELSE
1257	i = i + 1
1258	ENDIF
1259
1260	ENDDO
1261
1262	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1263	TRIM( gradients ), TRIM( slices )
1264
1265	!-- Profile of the geostrophic wind (component vg)
1266	!-- Building output strings
1267	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1268	gradients = '------'
1269	slices = ' 0'
1270	coordinates = ' 0.0'
1271	i = 1
1272	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1273
1274	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1275	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1276
1277	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1278	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1279
1280	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1281	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1282
1283	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1284	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1285
1286	IF ( i == 10 ) THEN
1287	EXIT
1288	ELSE
1289	i = i + 1
1290	ENDIF
1291
1292	ENDDO
1293
1294	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1295	TRIM( gradients ), TRIM( slices )
1296
1297	!
1298	!-- Initial wind profiles
1299	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1300
1301	!
1302	!-- Initial temperature profile
1303	!-- Building output strings, starting with surface temperature
1304	WRITE ( temperatures, '(F6.2)' ) pt_surface
1305	gradients = '------'
1306	slices = ' 0'
1307	coordinates = ' 0.0'
1308	i = 1
1309	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1310
1311	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1312	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1313
1314	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1315	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1316
1317	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1318	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1319
1320	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1321	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1322
1323	IF ( i == 10 ) THEN
1324	EXIT
1325	ELSE
1326	i = i + 1
1327	ENDIF
1328
1329	ENDDO
1330
1331	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1332	TRIM( gradients ), TRIM( slices )
1333
1334	!
1335	!-- Initial humidity profile
1336	!-- Building output strings, starting with surface humidity
1337	IF ( humidity .OR. passive_scalar ) THEN
1338	WRITE ( temperatures, '(E8.1)' ) q_surface
1339	gradients = '--------'
1340	slices = ' 0'
1341	coordinates = ' 0.0'
1342	i = 1
1343	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1344
1345	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1346	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1347
1348	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1349	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1350
1351	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1352	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1353
1354	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1355	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1356
1357	IF ( i == 10 ) THEN
1358	EXIT
1359	ELSE
1360	i = i + 1
1361	ENDIF
1362
1363	ENDDO
1364
1365	IF ( humidity ) THEN
1366	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1367	TRIM( gradients ), TRIM( slices )
1368	ELSE
1369	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1370	TRIM( gradients ), TRIM( slices )
1371	ENDIF
1372	ENDIF
1373
1374	!
1375	!-- Initial salinity profile
1376	!-- Building output strings, starting with surface salinity
1377	IF ( ocean ) THEN
1378	WRITE ( temperatures, '(F6.2)' ) sa_surface
1379	gradients = '------'
1380	slices = ' 0'
1381	coordinates = ' 0.0'
1382	i = 1
1383	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1384
1385	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1386	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1387
1388	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1389	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1390
1391	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1392	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1393
1394	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1395	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1396
1397	IF ( i == 10 ) THEN
1398	EXIT
1399	ELSE
1400	i = i + 1
1401	ENDIF
1402
1403	ENDDO
1404
1405	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1406	TRIM( gradients ), TRIM( slices )
1407	ENDIF
1408
1409	!
1410	!-- Profile for the large scale vertial velocity
1411	!-- Building output strings, starting with surface value
1412	IF ( large_scale_subsidence ) THEN
1413	temperatures = ' 0.0'
1414	gradients = '------'
1415	slices = ' 0'
1416	coordinates = ' 0.0'
1417	i = 1
1418	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1419
1420	WRITE (coor_chr,'(E10.2,7X)') &
1421	w_subs(subs_vertical_gradient_level_i(i))
1422	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1423
1424	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1425	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1426
1427	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1428	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1429
1430	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1431	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1432
1433	IF ( i == 10 ) THEN
1434	EXIT
1435	ELSE
1436	i = i + 1
1437	ENDIF
1438
1439	ENDDO
1440
1441	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1442	TRIM( gradients ), TRIM( slices )
1443	ENDIF
1444
1445	!
1446	!-- Cloud physcis parameters / quantities / numerical methods
1447	WRITE ( io, 430 )
1448	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1449	WRITE ( io, 431 )
1450	ELSEIF ( humidity .AND. cloud_physics ) THEN
1451	WRITE ( io, 432 )
1452	IF ( radiation ) WRITE ( io, 132 )
1453	IF ( precipitation ) WRITE ( io, 133 )
1454	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1455	WRITE ( io, 433 )
1456	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1457	IF ( collision_kernel /= 'none' ) THEN
1458	WRITE ( io, 435 ) TRIM( collision_kernel )
1459	IF ( collision_kernel(6:9) == 'fast' ) THEN
1460	WRITE ( io, 436 ) radius_classes, dissipation_classes
1461	ENDIF
1462	ELSE
1463	WRITE ( io, 437 )
1464	ENDIF
1465	ENDIF
1466
1467	!
1468	!-- LES / turbulence parameters
1469	WRITE ( io, 450 )
1470
1471	!--
1472	! ... LES-constants used must still be added here
1473	!--
1474	IF ( constant_diffusion ) THEN
1475	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1476	prandtl_number
1477	ENDIF
1478	IF ( .NOT. constant_diffusion) THEN
1479	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1480	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1481	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1482	ENDIF
1483
1484	!
1485	!-- Special actions during the run
1486	WRITE ( io, 470 )
1487	IF ( create_disturbances ) THEN
1488	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1489	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1490	zu(disturbance_level_ind_t), disturbance_level_ind_t
1491	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1492	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1493	ELSE
1494	WRITE ( io, 473 ) disturbance_energy_limit
1495	ENDIF
1496	WRITE ( io, 474 ) TRIM( random_generator )
1497	ENDIF
1498	IF ( pt_surface_initial_change /= 0.0 ) THEN
1499	WRITE ( io, 475 ) pt_surface_initial_change
1500	ENDIF
1501	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1502	WRITE ( io, 476 ) q_surface_initial_change
1503	ENDIF
1504	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1505	WRITE ( io, 477 ) q_surface_initial_change
1506	ENDIF
1507
1508	IF ( particle_advection ) THEN
1509	!
1510	!-- Particle attributes
1511	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1512	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1513	end_time_prel, dt_sort_particles
1514	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1515	IF ( random_start_position ) WRITE ( io, 481 )
1516	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1517	WRITE ( io, 495 ) total_number_of_particles
1518	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1519	WRITE ( io, 483 ) maximum_number_of_tailpoints
1520	IF ( minimum_tailpoint_distance /= 0 ) THEN
1521	WRITE ( io, 484 ) total_number_of_tails, &
1522	minimum_tailpoint_distance, &
1523	maximum_tailpoint_age
1524	ENDIF
1525	ENDIF
1526	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1527	WRITE ( io, 485 ) dt_write_particle_data
1528	output_format = ' '
1529	IF ( netcdf_output ) THEN
1530	IF ( netcdf_data_format > 1 ) THEN
1531	output_format = 'netcdf (64 bit offset) and binary'
1532	ELSE
1533	output_format = 'netcdf and binary'
1534	ENDIF
1535	ELSE
1536	output_format = 'binary'
1537	ENDIF
1538	WRITE ( io, 344 ) output_format
1539	ENDIF
1540	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1541	IF ( write_particle_statistics ) WRITE ( io, 486 )
1542
1543	WRITE ( io, 487 ) number_of_particle_groups
1544
1545	DO i = 1, number_of_particle_groups
1546	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1547	WRITE ( io, 490 ) i, 0.0
1548	WRITE ( io, 492 )
1549	ELSE
1550	WRITE ( io, 490 ) i, radius(i)
1551	IF ( density_ratio(i) /= 0.0 ) THEN
1552	WRITE ( io, 491 ) density_ratio(i)
1553	ELSE
1554	WRITE ( io, 492 )
1555	ENDIF
1556	ENDIF
1557	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1558	pdx(i), pdy(i), pdz(i)
1559	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1560	ENDDO
1561
1562	ENDIF
1563
1564
1565	!
1566	!-- Parameters of 1D-model
1567	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1568	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1569	mixing_length_1d, dissipation_1d
1570	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1571	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1572	ENDIF
1573	ENDIF
1574
1575	!
1576	!-- User-defined informations
1577	CALL user_header( io )
1578
1579	WRITE ( io, 99 )
1580
1581	!
1582	!-- Write buffer contents to disc immediately
1583	CALL local_flush( io )
1584
1585	!
1586	!-- Here the FORMATs start
1587
1588	99 FORMAT (1X,78('-'))
1589	100 FORMAT (/1X,'******************************',6X,42('-')/ &
1590	1X,'* ',A,' *',6X,A/ &
1591	1X,'******************************',6X,42('-'))
1592	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1593	37X,42('-'))
1594	102 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
1595	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
1596	' Run on host: ',A10)
1597	#if defined( __parallel )
1598	103 FORMAT (' Number of PEs:',10X,I6,6X,'Processor grid (x,y): (',I3,',',I3, &
1599	')',1X,A)
1600	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1601	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1602	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1603	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1604	37X,'because the job is running on an SMP-cluster')
1605	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1606	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1607	109 FORMAT (37X,'Precursor run for coupled atmos-ocean run'/ &
1608	37X,42('-'))
1609	114 FORMAT (37X,'Coupled atmosphere-ocean run following'/ &
1610	37X,'independent precursor runs'/ &
1611	37X,42('-'))
1612	#endif
1613	110 FORMAT (/' Numerical Schemes:'/ &
1614	' -----------------'/)
1615	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1616	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1617	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1618	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1619	' or Upstream')
1620	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1621	' or Upstream')
1622	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1623	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
1624	' translation velocity = ',A/ &
1625	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1626	122 FORMAT (' --> Time differencing scheme: ',A)
1627	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1628	' maximum damping coefficient: ',F5.3, ' 1/s')
1629	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1630	130 FORMAT (' --> Additional prognostic equation for the total water content')
1631	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1632	F6.2, ' K assumed')
1633	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1634	' effective emissivity scheme')
1635	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1636	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1637	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1638	A,'-cycle)'/ &
1639	' number of grid levels: ',I2/ &
1640	' Gauss-Seidel red/black iterations: ',I2)
1641	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1642	I3,')')
1643	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1644	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1645	I3,')'/ &
1646	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1647	I3,')')
1648	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1649	139 FORMAT (' --> Loop optimization method: ',A)
1650	140 FORMAT (' maximum residual allowed: ',E10.3)
1651	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1652	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1653	'step')
1654	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1655	'kinetic energy')
1656	144 FORMAT (' masking method is used')
1657	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1658	'conserved'/ &
1659	' using the ',A,' mode')
1660	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1661	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1662	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1663	/' starting from dp_level_b =', F8.3, 'm', A /)
1664	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1665	'prognostic equation for')
1666	154 FORMAT (' the potential temperature')
1667	200 FORMAT (//' Run time and time step information:'/ &
1668	' ----------------------------------'/)
1669	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1670	' CFL-factor: ',F4.2)
1671	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1672	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1673	' End time: ',F9.3,' s')
1674	204 FORMAT ( A,F9.3,' s')
1675	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1676	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1677	' CPU-time used: ',F9.3,' s per timestep: ', &
1678	' ',F9.3,' s'/ &
1679	' per second of simulated tim', &
1680	'e: ',F9.3,' s')
1681	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
1682	250 FORMAT (//' Computational grid and domain size:'/ &
1683	' ----------------------------------'// &
1684	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1685	' m dz = ',F7.3,' m'/ &
1686	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1687	' m z(u) = ',F10.3,' m'/)
1688	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1689	' factor: ',F5.3/ &
1690	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1691	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1692	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1693	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1694	' degrees')
1695	270 FORMAT (//' Topography informations:'/ &
1696	' -----------------------'// &
1697	1X,'Topography: ',A)
1698	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1699	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1700	' / ',I4)
1701	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1702	' direction' / &
1703	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1704	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1705	278 FORMAT (' Topography grid definition convention:'/ &
1706	' cell edge (staggered grid points'/ &
1707	' (u in x-direction, v in y-direction))' /)
1708	279 FORMAT (' Topography grid definition convention:'/ &
1709	' cell center (scalar grid points)' /)
1710	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1711	' ------------------------------'// &
1712	' Canopy mode: ', A / &
1713	' Canopy top: ',I4 / &
1714	' Leaf drag coefficient: ',F6.2 /)
1715	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1716	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1717	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1718	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1719	' Height: ',A,' m'/ &
1720	' Leaf area density: ',A,' m2/m3'/ &
1721	' Gradient: ',A,' m2/m4'/ &
1722	' Gridpoint: ',A)
1723
1724	300 FORMAT (//' Boundary conditions:'/ &
1725	' -------------------'// &
1726	' p uv ', &
1727	' pt'// &
1728	' B. bound.: ',A/ &
1729	' T. bound.: ',A)
1730	301 FORMAT (/' ',A// &
1731	' B. bound.: ',A/ &
1732	' T. bound.: ',A)
1733	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1734	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1735	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1736	'computational u,v-level:'// &
1737	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
1738	' m kappa = ',F4.2/ &
1739	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1740	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1741	307 FORMAT (' Heatflux has a random normal distribution')
1742	308 FORMAT (' Predefined surface temperature')
1743	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1744	310 FORMAT (//' 1D-Model:'// &
1745	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1746	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1747	312 FORMAT (' Predefined surface humidity')
1748	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1749	314 FORMAT (' Predefined scalar value at the surface')
1750	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1751	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1752	'atmosphere model')
1753	317 FORMAT (//' Lateral boundaries:'/ &
1754	' left/right: ',A/ &
1755	' north/south: ',A)
1756	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
1757	'damping factor = ',F6.4)
1758	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1759	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1760	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1761	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1762	' v: ',F9.6,' m2/s2')
1763	325 FORMAT (//' List output:'/ &
1764	' -----------'// &
1765	' 1D-Profiles:'/ &
1766	' Output every ',F8.2,' s')
1767	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1768	' Averaging input every ',F8.2,' s')
1769	330 FORMAT (//' Data output:'/ &
1770	' -----------'/)
1771	331 FORMAT (/' 1D-Profiles:')
1772	332 FORMAT (/' ',A)
1773	333 FORMAT (' Output every ',F8.2,' s',/ &
1774	' Time averaged over ',F8.2,' s'/ &
1775	' Averaging input every ',F8.2,' s')
1776	334 FORMAT (/' 2D-Arrays',A,':')
1777	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1778	' Output every ',F8.2,' s ',A/ &
1779	' Cross sections at ',A1,' = ',A/ &
1780	' scalar-coordinates: ',A,' m'/)
1781	336 FORMAT (/' 3D-Arrays',A,':')
1782	337 FORMAT (/' Arrays: ',A/ &
1783	' Output every ',F8.2,' s ',A/ &
1784	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1785	338 FORMAT (' Compressed data output'/ &
1786	' Decimal precision: ',A/)
1787	339 FORMAT (' No output during initial ',F8.2,' s')
1788	340 FORMAT (/' Time series:')
1789	341 FORMAT (' Output every ',F8.2,' s'/)
1790	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1791	' Output every ',F8.2,' s ',A/ &
1792	' Time averaged over ',F8.2,' s'/ &
1793	' Averaging input every ',F8.2,' s'/ &
1794	' Cross sections at ',A1,' = ',A/ &
1795	' scalar-coordinates: ',A,' m'/)
1796	343 FORMAT (/' Arrays: ',A/ &
1797	' Output every ',F8.2,' s ',A/ &
1798	' Time averaged over ',F8.2,' s'/ &
1799	' Averaging input every ',F8.2,' s'/ &
1800	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1801	344 FORMAT (' Output format: ',A/)
1802	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1803	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1804	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1805	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1806	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1807	347 FORMAT (' Variables: ',A/ &
1808	' Output every ',F8.2,' s')
1809	348 FORMAT (' Variables: ',A/ &
1810	' Output every ',F8.2,' s'/ &
1811	' Time averaged over ',F8.2,' s'/ &
1812	' Averaging input every ',F8.2,' s')
1813	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1814	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1815	13(' ',8(F8.2,',')/) )
1816	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1817	'all gridpoints along ',A,'-direction (default).' )
1818	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1819	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1820	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1821	#if defined( __dvrp_graphics )
1822	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1823	' Output every ',F7.1,' s'/ &
1824	' Output mode: ',A/ &
1825	' Host / User: ',A,' / ',A/ &
1826	' Directory: ',A// &
1827	' The sequence contains:')
1828	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1829	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1830	362 FORMAT (/' Slicer plane ',A/ &
1831	' Slicer limits: [',F6.2,',',F6.2,']')
1832	363 FORMAT (/' Particles'/ &
1833	' particle size: ',F7.2,' m')
1834	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1835	F6.2,',',F6.2,']')
1836	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1837	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1838	')'/ &
1839	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1840	' from y = ',F9.1,' m to y = ',F9.1,' m')
1841	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1842	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1843	#endif
1844	#if defined( __spectra )
1845	370 FORMAT (' Spectra:')
1846	371 FORMAT (' Output every ',F7.1,' s'/)
1847	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1848	' Directions: ', 10(A5,',')/ &
1849	' height levels k = ', 20(I3,',')/ &
1850	' ', 20(I3,',')/ &
1851	' ', 20(I3,',')/ &
1852	' ', 20(I3,',')/ &
1853	' ', 19(I3,','),I3,'.'/ &
1854	' height levels selected for standard plot:'/ &
1855	' k = ', 20(I3,',')/ &
1856	' ', 20(I3,',')/ &
1857	' ', 20(I3,',')/ &
1858	' ', 20(I3,',')/ &
1859	' ', 19(I3,','),I3,'.'/ &
1860	' Time averaged over ', F7.1, ' s,' / &
1861	' Profiles for the time averaging are taken every ', &
1862	F6.1,' s')
1863	#endif
1864	400 FORMAT (//' Physical quantities:'/ &
1865	' -------------------'/)
1866	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1867	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1868	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1869	' f* = ',F9.6,' 1/s')
1870	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1871	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1872	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1873	415 FORMAT (/' Cloud physics parameters:'/ &
1874	' ------------------------'/)
1875	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1876	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1877	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1878	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1879	' Vapourization heat : L_v = ',E8.2,' J/kg')
1880	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1881	' Height: ',A,' m'/ &
1882	' Temperature: ',A,' K'/ &
1883	' Gradient: ',A,' K/100m'/ &
1884	' Gridpoint: ',A)
1885	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1886	' Height: ',A,' m'/ &
1887	' Humidity: ',A,' kg/kg'/ &
1888	' Gradient: ',A,' (kg/kg)/100m'/ &
1889	' Gridpoint: ',A)
1890	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1891	' Height: ',A,' m'/ &
1892	' Scalar concentration: ',A,' kg/m**3'/ &
1893	' Gradient: ',A,' (kg/m**3)/100m'/ &
1894	' Gridpoint: ',A)
1895	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1896	' Height: ',A,' m'/ &
1897	' ug: ',A,' m/s'/ &
1898	' Gradient: ',A,' 1/100s'/ &
1899	' Gridpoint: ',A)
1900	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1901	' Height: ',A,' m'/ &
1902	' vg: ',A,' m/s'/ &
1903	' Gradient: ',A,' 1/100s'/ &
1904	' Gridpoint: ',A)
1905	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1906	' Height: ',A,' m'/ &
1907	' Salinity: ',A,' psu'/ &
1908	' Gradient: ',A,' psu/100m'/ &
1909	' Gridpoint: ',A)
1910	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1911	' Height: ',A,' m'/ &
1912	' w_subs: ',A,' m/s'/ &
1913	' Gradient: ',A,' (m/s)/100m'/ &
1914	' Gridpoint: ',A)
1915	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1916	' profiles')
1917	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1918	' ----------------------------------'/)
1919	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1920	'on)')
1921	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1922	' total water content is used.'/ &
1923	' Condensation is parameterized via 0% - or 100% scheme.')
1924	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1925	'icle model')
1926	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1927	' droplets < 1.0E-6 m')
1928	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1929	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1930	'are used'/ &
1931	' number of radius classes: ',I3,' interval ', &
1932	'[1.0E-6,2.0E-4] m'/ &
1933	' number of dissipation classes: ',I2,' interval ', &
1934	'[0,1000] cm2/s3')
1935	437 FORMAT (' Droplet collision is switched off')
1936	450 FORMAT (//' LES / Turbulence quantities:'/ &
1937	' ---------------------------'/)
1938	451 FORMAT (' Diffusion coefficients are constant:'/ &
1939	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1940	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1941	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1942	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1943	470 FORMAT (//' Actions during the simulation:'/ &
1944	' -----------------------------'/)
1945	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1946	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1947	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1948	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1949	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1950	' to i/j =',I4)
1951	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1952	1X,F5.3, ' m2/s2')
1953	474 FORMAT (' Random number generator used : ',A/)
1954	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1955	'respectively, if'/ &
1956	' the value is negative) by ',F5.2,' K at the beginning of the',&
1957	' 3D-simulation'/)
1958	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1959	'respectively, if the'/ &
1960	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1961	' the 3D-simulation'/)
1962	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1963	'respectively, if the'/ &
1964	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1965	' the 3D-simulation'/)
1966	480 FORMAT (' Particles:'/ &
1967	' ---------'// &
1968	' Particle advection is active (switched on at t = ', F7.1, &
1969	' s)'/ &
1970	' Start of new particle generations every ',F6.1,' s'/ &
1971	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1972	' bottom: ', A, ' top: ', A/&
1973	' Maximum particle age: ',F9.1,' s'/ &
1974	' Advection stopped at t = ',F9.1,' s'/ &
1975	' Particles are sorted every ',F9.1,' s'/)
1976	481 FORMAT (' Particles have random start positions'/)
1977	482 FORMAT (' Particles are advected only horizontally'/)
1978	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1979	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1980	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1981	' Maximum age of the end of the tail: ',F8.2,' s')
1982	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1983	486 FORMAT (' Particle statistics are written on file'/)
1984	487 FORMAT (' Number of particle groups: ',I2/)
1985	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1986	' minimum timestep for advection: ', F7.5/)
1987	489 FORMAT (' Number of particles simultaneously released at each ', &
1988	'point: ', I5/)
1989	490 FORMAT (' Particle group ',I2,':'/ &
1990	' Particle radius: ',E10.3, 'm')
1991	491 FORMAT (' Particle inertia is activated'/ &
1992	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1993	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1994	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1995	' y:',F8.1,' - ',F8.1,' m'/&
1996	' z:',F8.1,' - ',F8.1,' m'/&
1997	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1998	' m dz = ',F8.1,' m'/)
1999	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2000	F8.2,' s'/)
2001	495 FORMAT (' Number of particles in total domain: ',I10/)
2002	500 FORMAT (//' 1D-Model parameters:'/ &
2003	' -------------------'// &
2004	' Simulation time: ',F8.1,' s'/ &
2005	' Run-controll output every: ',F8.1,' s'/ &
2006	' Vertical profile output every: ',F8.1,' s'/ &
2007	' Mixing length calculation: ',A/ &
2008	' Dissipation calculation: ',A/)
2009	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2010	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2011	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2012
2013
2014	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |