Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 54

Last change on this file since 54 was 46, checked in by raasch, 18 years ago
updating parts of Marcus changes
Property svn:keywords set to `Id`
File size: 54.5 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[46]	6	! Output of netcdf_64bit_3d
[1]	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: header.f90 46 2007-03-05 06:00:47Z raasch $
[39]	11	!
	12	! 19 2007-02-23 04:53:48Z raasch
	13	! Output of scalar flux applied at top boundary
	14	!
[3]	15	! RCS Log replace by Id keyword, revision history cleaned up
	16	!
[1]	17	! Revision 1.63 2006/08/22 13:53:13 raasch
	18	! Output of dz_max
	19	!
	20	! Revision 1.1 1997/08/11 06:17:20 raasch
	21	! Initial revision
	22	!
	23	!
	24	! Description:
	25	! ------------
	26	! Writing a header with all important informations about the actual run.
	27	! This subroutine is called three times, two times at the beginning
	28	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	29	! end of the run, then writing additional information about CPU-usage on file
	30	! header.
	31	!------------------------------------------------------------------------------!
	32
	33	USE arrays_3d
	34	USE control_parameters
	35	USE cloud_parameters
	36	USE cpulog
	37	USE dvrp_variables
	38	USE grid_variables
	39	USE indices
	40	USE model_1d
	41	USE particle_attributes
	42	USE pegrid
	43	USE spectrum
	44
	45	IMPLICIT NONE
	46
	47	CHARACTER (LEN=1) :: prec
	48	CHARACTER (LEN=2) :: do2d_mode
	49	CHARACTER (LEN=5) :: section_chr
	50	CHARACTER (LEN=9) :: time_to_string
	51	CHARACTER (LEN=10) :: coor_chr, host_chr
	52	CHARACTER (LEN=16) :: begin_chr
	53	CHARACTER (LEN=40) :: output_format
	54	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
	55	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
	56	run_classification, slices, temperatures, &
	57	ugcomponent, vgcomponent
	58	CHARACTER (LEN=85) :: roben, runten
	59
	60	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
	61	REAL :: cpuseconds_per_simulated_second
	62
	63	!
	64	!-- Open the output file. At the end of the simulation, output is directed
	65	!-- to unit 19.
	66	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	67	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	68	io = 15 ! header output on file RUN_CONTROL
	69	ELSE
	70	io = 19 ! header output on file HEADER
	71	ENDIF
	72	CALL check_open( io )
	73
	74	!
	75	!-- At the end of the run, output file (HEADER) will be rewritten with
	76	!-- new informations
	77	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	78
	79	!
	80	!-- Determine kind of model run
	81	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	82	run_classification = '3D - restart run'
	83	ELSE
	84	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	85	run_classification = '3D - run without 1D - prerun'
	86	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	87	run_classification = '3D - run with 1D - prerun'
	88	ELSE
	89	PRINT*,'+++ header: unknown action(s): ',initializing_actions
	90	ENDIF
	91	ENDIF
	92
	93	!
	94	!-- Run-identification, date, time, host
	95	host_chr = host(1:10)
	96	WRITE ( io, 100 ) version, TRIM( run_classification ), run_date, &
	97	run_identifier, run_time, runnr, ADJUSTR( host_chr )
	98	#if defined( __parallel )
	99	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	100	char1 = 'calculated'
	101	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	102	host(1:2) == 'lc' ) .AND. &
	103	npex == -1 .AND. pdims(2) == 1 ) THEN
	104	char1 = 'forced'
	105	ELSE
	106	char1 = 'predefined'
	107	ENDIF
	108	IF ( threads_per_task == 1 ) THEN
	109	WRITE ( io, 101 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
	110	ELSE
	111	WRITE ( io, 102 ) numprocs*threads_per_task, numprocs, &
	112	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	113	ENDIF
	114	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	115	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	116	npex == -1 .AND. pdims(2) == 1 ) &
	117	THEN
	118	WRITE ( io, 104 )
	119	ELSEIF ( pdims(2) == 1 ) THEN
	120	WRITE ( io, 105 ) 'x'
	121	ELSEIF ( pdims(1) == 1 ) THEN
	122	WRITE ( io, 105 ) 'y'
	123	ENDIF
	124	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 103 )
	125	#endif
	126	WRITE ( io, 99 )
	127
	128	!
	129	!-- Numerical schemes
	130	WRITE ( io, 110 )
	131	IF ( psolver(1:7) == 'poisfft' ) THEN
	132	WRITE ( io, 111 ) TRIM( fft_method )
	133	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	134	ELSEIF ( psolver == 'sor' ) THEN
	135	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	136	ELSEIF ( psolver == 'multigrid' ) THEN
	137	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	138	IF ( mg_cycles == -1 ) THEN
	139	WRITE ( io, 140 ) residual_limit
	140	ELSE
	141	WRITE ( io, 141 ) mg_cycles
	142	ENDIF
	143	IF ( mg_switch_to_pe0_level == 0 ) THEN
	144	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	145	nzt_mg(1)
	146	ELSE
	147	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	148	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	149	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	150	nzt_mg(mg_switch_to_pe0_level), &
	151	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	152	nzt_mg(1)
	153	ENDIF
	154	ENDIF
	155	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	156	THEN
	157	WRITE ( io, 142 )
	158	ENDIF
	159
	160	IF ( momentum_advec == 'pw-scheme' ) THEN
	161	WRITE ( io, 113 )
	162	ELSE
	163	WRITE ( io, 114 )
	164	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	165	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	166	overshoot_limit_w /= 0.0 ) THEN
	167	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	168	overshoot_limit_w
	169	ENDIF
	170	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	171	ups_limit_w /= 0.0 ) &
	172	THEN
	173	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	174	ENDIF
	175	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	176	ENDIF
	177	IF ( scalar_advec == 'pw-scheme' ) THEN
	178	WRITE ( io, 116 )
	179	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	180	WRITE ( io, 117 )
	181	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	182	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	183	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	184	ENDIF
	185	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	186	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	187	ENDIF
	188	ELSE
	189	WRITE ( io, 118 )
	190	ENDIF
	191	IF ( momentum_advec /= 'ups-scheme' .AND. scalar_advec /= 'ups-scheme' &
	192	.AND. scalar_advec /= 'bc-scheme' .AND. host(1:3) /= 'nec' ) THEN
	193	WRITE ( io, 139 )
	194	ENDIF
	195	IF ( galilei_transformation ) THEN
	196	IF ( use_ug_for_galilei_tr ) THEN
	197	char1 = 'geostrophic wind'
	198	ELSE
	199	char1 = 'mean wind in model domain'
	200	ENDIF
	201	IF ( simulated_time_at_begin == simulated_time ) THEN
	202	char2 = 'at the start of the run'
	203	ELSE
	204	char2 = 'at the end of the run'
	205	ENDIF
	206	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	207	advected_distance_x/1000.0, advected_distance_y/1000.0
	208	ENDIF
	209	IF ( timestep_scheme == 'leapfrog' ) THEN
	210	WRITE ( io, 120 )
	211	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	212	WRITE ( io, 121 )
	213	ELSE
	214	WRITE ( io, 122 ) timestep_scheme
	215	ENDIF
	216	IF ( rayleigh_damping_factor /= 0.0 ) THEN
	217	WRITE ( io, 123 ) rayleigh_damping_height, rayleigh_damping_factor
	218	ENDIF
	219	IF ( moisture ) THEN
	220	IF ( .NOT. cloud_physics ) THEN
	221	WRITE ( io, 129 )
	222	ELSE
	223	WRITE ( io, 130 )
	224	WRITE ( io, 131 )
	225	IF ( radiation ) WRITE ( io, 132 )
	226	IF ( precipitation ) WRITE ( io, 133 )
	227	ENDIF
	228	ENDIF
	229	IF ( passive_scalar ) WRITE ( io, 134 )
	230	IF ( conserve_volume_flow ) WRITE ( io, 150 )
	231	WRITE ( io, 99 )
	232
	233	!
	234	!-- Runtime and timestep informations
	235	WRITE ( io, 200 )
	236	IF ( .NOT. dt_fixed ) THEN
	237	WRITE ( io, 201 ) dt_max, cfl_factor
	238	ELSE
	239	WRITE ( io, 202 ) dt
	240	ENDIF
	241	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	242
	243	IF ( time_restart /= 9999999.9 .AND. &
	244	simulated_time_at_begin == simulated_time ) THEN
	245	IF ( dt_restart == 9999999.9 ) THEN
	246	WRITE ( io, 204 ) ' Restart at: ',time_restart
	247	ELSE
	248	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	249	ENDIF
	250	ENDIF
	251
	252	IF ( simulated_time_at_begin /= simulated_time ) THEN
	253	i = MAX ( log_point_s(10)%counts, 1 )
	254	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	255	cpuseconds_per_simulated_second = 0.0
	256	ELSE
	257	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	258	( simulated_time - &
	259	simulated_time_at_begin )
	260	ENDIF
	261	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	262	log_point_s(10)%sum / REAL( i ), &
	263	cpuseconds_per_simulated_second
	264	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	265	IF ( dt_restart == 9999999.9 ) THEN
	266	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	267	ELSE
	268	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	269	ENDIF
	270	ENDIF
	271	ENDIF
	272
	273	!
	274	!-- Computational grid
	275	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	276	IF ( dz_stretch_level_index < nzt+1 ) THEN
	277	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	278	dz_stretch_factor, dz_max
	279	ENDIF
	280	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	281	MIN( nnz+2, nzt+2 )
	282	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	283	WRITE ( io, 255 )
	284	ELSE
	285	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	286	ENDIF
	287	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	288
	289	!
	290	!-- Topography
	291	WRITE ( io, 270 ) topography
	292	SELECT CASE ( TRIM( topography ) )
	293
	294	CASE ( 'flat' )
	295	! no actions necessary
	296
	297	CASE ( 'single_building' )
	298	blx = INT( building_length_x / dx )
	299	bly = INT( building_length_y / dy )
	300	bh = INT( building_height / dz )
	301
	302	IF ( building_wall_left == 9999999.9 ) THEN
	303	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	304	ENDIF
	305	bxl = INT ( building_wall_left / dx + 0.5 )
	306	bxr = bxl + blx
	307
	308	IF ( building_wall_south == 9999999.9 ) THEN
	309	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	310	ENDIF
	311	bys = INT ( building_wall_south / dy + 0.5 )
	312	byn = bys + bly
	313
	314	WRITE ( io, 271 ) building_length_x, building_length_y, &
	315	building_height, bxl, bxr, bys, byn
	316
	317	END SELECT
	318
	319	!
	320	!-- Boundary conditions
	321	IF ( ibc_p_b == 0 ) THEN
	322	runten = 'p(0) = 0 \|'
	323	ELSEIF ( ibc_p_b == 1 ) THEN
	324	runten = 'p(0) = p(1) \|'
	325	ELSE
	326	runten = 'p(0) = p(1) +R\|'
	327	ENDIF
	328	IF ( ibc_p_t == 0 ) THEN
	329	roben = 'p(nzt+1) = 0 \|'
	330	ELSE
	331	roben = 'p(nzt+1) = p(nzt) \|'
	332	ENDIF
	333
	334	IF ( ibc_uv_b == 0 ) THEN
	335	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	336	ELSE
	337	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	338	ENDIF
	339	IF ( ibc_uv_t == 0 ) THEN
	340	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	341	ELSE
	342	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	343	ENDIF
	344
	345	IF ( ibc_pt_b == 0 ) THEN
	346	runten = TRIM( runten ) // ' pt(0) = pt_surface'
	347	ELSE
	348	runten = TRIM( runten ) // ' pt(0) = pt(1)'
	349	ENDIF
	350	IF ( ibc_pt_t == 0 ) THEN
[19]	351	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	352	ELSEIF( ibc_pt_t == 1 ) THEN
	353	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	354	ELSEIF( ibc_pt_t == 2 ) THEN
	355	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	356	ENDIF
	357
	358	WRITE ( io, 300 ) runten, roben
	359
	360	IF ( .NOT. constant_diffusion ) THEN
	361	IF ( ibc_e_b == 1 ) THEN
	362	runten = 'e(0) = e(1)'
	363	ELSE
	364	runten = 'e(0) = e(1) = (u/0.1)*2'
	365	ENDIF
	366	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	367
	368	WRITE ( io, 301 ) runten, roben
	369
	370	ENDIF
	371
	372	IF ( moisture .OR. passive_scalar ) THEN
	373	IF ( moisture ) THEN
	374	IF ( ibc_q_b == 0 ) THEN
	375	runten = 'q(0) = q_surface'
	376	ELSE
	377	runten = 'q(0) = q(1)'
	378	ENDIF
	379	IF ( ibc_q_t == 0 ) THEN
	380	roben = 'q(nzt) = q_top'
	381	ELSE
	382	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	383	ENDIF
	384	ELSE
	385	IF ( ibc_q_b == 0 ) THEN
	386	runten = 's(0) = s_surface'
	387	ELSE
	388	runten = 's(0) = s(1)'
	389	ENDIF
	390	IF ( ibc_q_t == 0 ) THEN
	391	roben = 's(nzt) = s_top'
	392	ELSE
	393	roben = 's(nzt) = s(nzt-1) + ds/dz'
	394	ENDIF
	395	ENDIF
	396
	397	WRITE ( io, 302 ) runten, roben
	398
	399	ENDIF
	400
	401	IF ( use_surface_fluxes ) THEN
	402	WRITE ( io, 303 )
	403	IF ( constant_heatflux ) THEN
	404	WRITE ( io, 306 ) surface_heatflux
	405	IF ( random_heatflux ) WRITE ( io, 307 )
	406	ENDIF
	407	IF ( moisture .AND. constant_waterflux ) THEN
	408	WRITE ( io, 311 ) surface_waterflux
	409	ENDIF
	410	IF ( passive_scalar .AND. constant_waterflux ) THEN
	411	WRITE ( io, 313 ) surface_waterflux
	412	ENDIF
	413	ENDIF
	414
[19]	415	IF ( use_top_fluxes ) THEN
	416	WRITE ( io, 304 )
	417	IF ( constant_top_heatflux ) THEN
	418	WRITE ( io, 306 ) top_heatflux
	419	ENDIF
	420	IF ( moisture .OR. passive_scalar ) THEN
	421	WRITE ( io, 315 )
	422	ENDIF
	423	ENDIF
	424
[1]	425	IF ( prandtl_layer ) THEN
	426	WRITE ( io, 305 ) zu(1), roughness_length, kappa, rif_min, rif_max
	427	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
	428	IF ( moisture .AND. .NOT. constant_waterflux ) THEN
	429	WRITE ( io, 312 )
	430	ENDIF
	431	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	432	WRITE ( io, 314 )
	433	ENDIF
	434	ELSE
	435	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	436	WRITE ( io, 310 ) rif_min, rif_max
	437	ENDIF
	438	ENDIF
	439
	440	WRITE ( io, 317 ) bc_lr, bc_ns
	441	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	442	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
	443	ENDIF
	444
	445	!
	446	!-- Listing of 1D-profiles
	447	WRITE ( io, 320 ) dt_dopr_listing
	448	IF ( averaging_interval_pr /= 0.0 ) THEN
	449	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	450	ENDIF
	451
	452	!
	453	!-- DATA output
	454	WRITE ( io, 330 )
	455	IF ( averaging_interval_pr /= 0.0 ) THEN
	456	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	457	ENDIF
	458
	459	!
	460	!-- 1D-profiles
	461	dopr_chr = 'Profile:'
	462	IF ( dopr_n /= 0 ) THEN
	463	WRITE ( io, 331 )
	464
	465	output_format = ''
	466	IF ( netcdf_output ) THEN
	467	IF ( netcdf_64bit ) THEN
	468	output_format = 'netcdf (64 bit offset)'
	469	ELSE
	470	output_format = 'netcdf'
	471	ENDIF
	472	ENDIF
	473	IF ( profil_output ) THEN
	474	IF ( netcdf_output ) THEN
	475	output_format = TRIM( output_format ) // ' and profil'
	476	ELSE
	477	output_format = 'profil'
	478	ENDIF
	479	ENDIF
	480	WRITE ( io, 345 ) output_format
	481
	482	DO i = 1, dopr_n
	483	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	484	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	485	WRITE ( io, 332 ) dopr_chr
	486	dopr_chr = ' :'
	487	ENDIF
	488	ENDDO
	489
	490	IF ( dopr_chr /= '' ) THEN
	491	WRITE ( io, 332 ) dopr_chr
	492	ENDIF
	493	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	494	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	495	ENDIF
	496
	497	!
	498	!-- 2D-arrays
	499	DO av = 0, 1
	500
	501	i = 1
	502	do2d_xy = ''
	503	do2d_xz = ''
	504	do2d_yz = ''
	505	DO WHILE ( do2d(av,i) /= ' ' )
	506
	507	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	508	do2d_mode = do2d(av,i)(l-1:l)
	509
	510	SELECT CASE ( do2d_mode )
	511	CASE ( 'xy' )
	512	ll = LEN_TRIM( do2d_xy )
	513	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	514	CASE ( 'xz' )
	515	ll = LEN_TRIM( do2d_xz )
	516	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	517	CASE ( 'yz' )
	518	ll = LEN_TRIM( do2d_yz )
	519	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	520	END SELECT
	521
	522	i = i + 1
	523
	524	ENDDO
	525
	526	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	527	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	528	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	529	( netcdf_output .OR. iso2d_output ) ) THEN
	530
	531	IF ( av == 0 ) THEN
	532	WRITE ( io, 334 ) ''
	533	ELSE
	534	WRITE ( io, 334 ) '(time-averaged)'
	535	ENDIF
	536
	537	IF ( do2d_at_begin ) THEN
	538	begin_chr = 'and at the start'
	539	ELSE
	540	begin_chr = ''
	541	ENDIF
	542
	543	output_format = ''
	544	IF ( netcdf_output ) THEN
	545	IF ( netcdf_64bit ) THEN
	546	output_format = 'netcdf (64 bit offset)'
	547	ELSE
	548	output_format = 'netcdf'
	549	ENDIF
	550	ENDIF
	551	IF ( iso2d_output ) THEN
	552	IF ( netcdf_output ) THEN
	553	output_format = TRIM( output_format ) // ' and iso2d'
	554	ELSE
	555	output_format = 'iso2d'
	556	ENDIF
	557	ENDIF
	558	WRITE ( io, 345 ) output_format
	559
	560	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	561	i = 1
	562	slices = '/'
	563	coordinates = '/'
	564	!
	565	!-- Building strings with index and coordinate informations of the
	566	!-- slices
	567	DO WHILE ( section(i,1) /= -9999 )
	568
	569	WRITE (section_chr,'(I5)') section(i,1)
	570	section_chr = ADJUSTL( section_chr )
	571	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	572
	573	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	574	coor_chr = ADJUSTL( coor_chr )
	575	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	576
	577	i = i + 1
	578	ENDDO
	579	IF ( av == 0 ) THEN
	580	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	581	TRIM( begin_chr ), 'k', TRIM( slices ), &
	582	TRIM( coordinates )
	583	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	584	WRITE ( io, 339 ) skip_time_do2d_xy
	585	ENDIF
	586	ELSE
	587	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	588	TRIM( begin_chr ), averaging_interval, &
	589	dt_averaging_input, 'k', TRIM( slices ), &
	590	TRIM( coordinates )
	591	IF ( skip_time_data_output_av /= 0.0 ) THEN
	592	WRITE ( io, 339 ) skip_time_data_output_av
	593	ENDIF
	594	ENDIF
	595
	596	ENDIF
	597
	598	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	599	i = 1
	600	slices = '/'
	601	coordinates = '/'
	602	!
	603	!-- Building strings with index and coordinate informations of the
	604	!-- slices
	605	DO WHILE ( section(i,2) /= -9999 )
	606
	607	WRITE (section_chr,'(I5)') section(i,2)
	608	section_chr = ADJUSTL( section_chr )
	609	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	610
	611	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	612	coor_chr = ADJUSTL( coor_chr )
	613	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	614
	615	i = i + 1
	616	ENDDO
	617	IF ( av == 0 ) THEN
	618	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	619	TRIM( begin_chr ), 'j', TRIM( slices ), &
	620	TRIM( coordinates )
	621	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	622	WRITE ( io, 339 ) skip_time_do2d_xz
	623	ENDIF
	624	ELSE
	625	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	626	TRIM( begin_chr ), averaging_interval, &
	627	dt_averaging_input, 'j', TRIM( slices ), &
	628	TRIM( coordinates )
	629	IF ( skip_time_data_output_av /= 0.0 ) THEN
	630	WRITE ( io, 339 ) skip_time_data_output_av
	631	ENDIF
	632	ENDIF
	633	ENDIF
	634
	635	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	636	i = 1
	637	slices = '/'
	638	coordinates = '/'
	639	!
	640	!-- Building strings with index and coordinate informations of the
	641	!-- slices
	642	DO WHILE ( section(i,3) /= -9999 )
	643
	644	WRITE (section_chr,'(I5)') section(i,3)
	645	section_chr = ADJUSTL( section_chr )
	646	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	647
	648	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	649	coor_chr = ADJUSTL( coor_chr )
	650	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	651
	652	i = i + 1
	653	ENDDO
	654	IF ( av == 0 ) THEN
	655	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	656	TRIM( begin_chr ), 'i', TRIM( slices ), &
	657	TRIM( coordinates )
	658	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	659	WRITE ( io, 339 ) skip_time_do2d_yz
	660	ENDIF
	661	ELSE
	662	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	663	TRIM( begin_chr ), averaging_interval, &
	664	dt_averaging_input, 'i', TRIM( slices ), &
	665	TRIM( coordinates )
	666	IF ( skip_time_data_output_av /= 0.0 ) THEN
	667	WRITE ( io, 339 ) skip_time_data_output_av
	668	ENDIF
	669	ENDIF
	670	ENDIF
	671
	672	ENDIF
	673
	674	ENDDO
	675
	676	!
	677	!-- 3d-arrays
	678	DO av = 0, 1
	679
	680	i = 1
	681	do3d_chr = ''
	682	DO WHILE ( do3d(av,i) /= ' ' )
	683
	684	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	685	i = i + 1
	686
	687	ENDDO
	688
	689	IF ( do3d_chr /= '' ) THEN
	690	IF ( av == 0 ) THEN
	691	WRITE ( io, 336 ) ''
	692	ELSE
	693	WRITE ( io, 336 ) '(time-averaged)'
	694	ENDIF
	695
	696	output_format = ''
	697	IF ( netcdf_output ) THEN
[46]	698	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
[1]	699	output_format = 'netcdf (64 bit offset)'
	700	ELSE
	701	output_format = 'netcdf'
	702	ENDIF
	703	ENDIF
	704	IF ( avs_output ) THEN
	705	IF ( netcdf_output ) THEN
	706	output_format = TRIM( output_format ) // ' and avs'
	707	ELSE
	708	output_format = 'avs'
	709	ENDIF
	710	ENDIF
	711	WRITE ( io, 345 ) output_format
	712
	713	IF ( do3d_at_begin ) THEN
	714	begin_chr = 'and at the start'
	715	ELSE
	716	begin_chr = ''
	717	ENDIF
	718	IF ( av == 0 ) THEN
	719	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	720	zu(nz_do3d), nz_do3d
	721	ELSE
	722	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	723	TRIM( begin_chr ), averaging_interval, &
	724	dt_averaging_input, zu(nz_do3d), nz_do3d
	725	ENDIF
	726
	727	IF ( do3d_compress ) THEN
	728	do3d_chr = ''
	729	i = 1
	730	DO WHILE ( do3d(av,i) /= ' ' )
	731
	732	SELECT CASE ( do3d(av,i) )
	733	CASE ( 'u' )
	734	j = 1
	735	CASE ( 'v' )
	736	j = 2
	737	CASE ( 'w' )
	738	j = 3
	739	CASE ( 'p' )
	740	j = 4
	741	CASE ( 'pt' )
	742	j = 5
	743	END SELECT
	744	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	745	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	746	':' // prec // ','
	747	i = i + 1
	748
	749	ENDDO
	750	WRITE ( io, 338 ) do3d_chr
	751
	752	ENDIF
	753
	754	IF ( av == 0 ) THEN
	755	IF ( skip_time_do3d /= 0.0 ) THEN
	756	WRITE ( io, 339 ) skip_time_do3d
	757	ENDIF
	758	ELSE
	759	IF ( skip_time_data_output_av /= 0.0 ) THEN
	760	WRITE ( io, 339 ) skip_time_data_output_av
	761	ENDIF
	762	ENDIF
	763
	764	ENDIF
	765
	766	ENDDO
	767
	768	!
	769	!-- Timeseries
	770	IF ( dt_dots /= 9999999.9 ) THEN
	771	WRITE ( io, 340 )
	772
	773	output_format = ''
	774	IF ( netcdf_output ) THEN
	775	IF ( netcdf_64bit ) THEN
	776	output_format = 'netcdf (64 bit offset)'
	777	ELSE
	778	output_format = 'netcdf'
	779	ENDIF
	780	ENDIF
	781	IF ( profil_output ) THEN
	782	IF ( netcdf_output ) THEN
	783	output_format = TRIM( output_format ) // ' and profil'
	784	ELSE
	785	output_format = 'profil'
	786	ENDIF
	787	ENDIF
	788	WRITE ( io, 345 ) output_format
	789	WRITE ( io, 341 ) dt_dots
	790	ENDIF
	791
	792	#if defined( __dvrp_graphics )
	793	!
	794	!-- Dvrp-output
	795	IF ( dt_dvrp /= 9999999.9 ) THEN
	796	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	797	TRIM( dvrp_username ), TRIM( dvrp_directory )
	798	i = 1
	799	l = 0
	800	DO WHILE ( mode_dvrp(i) /= ' ' )
	801	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
	802	READ ( mode_dvrp(i), '(10X,I1)' ) j
	803	l = l + 1
	804	IF ( do3d(0,j) /= ' ' ) THEN
	805	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	806	ENDIF
	807	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
	808	READ ( mode_dvrp(i), '(6X,I1)' ) j
	809	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	810	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	811	WRITE ( io, 363 )
	812	ENDIF
	813	i = i + 1
	814	ENDDO
	815	ENDIF
	816	#endif
	817
	818	#if defined( __spectra )
	819	!
	820	!-- Spectra output
	821	IF ( dt_dosp /= 9999999.9 ) THEN
	822	WRITE ( io, 370 )
	823
	824	output_format = ''
	825	IF ( netcdf_output ) THEN
	826	IF ( netcdf_64bit ) THEN
	827	output_format = 'netcdf (64 bit offset)'
	828	ELSE
	829	output_format = 'netcdf'
	830	ENDIF
	831	ENDIF
	832	IF ( profil_output ) THEN
	833	IF ( netcdf_output ) THEN
	834	output_format = TRIM( output_format ) // ' and profil'
	835	ELSE
	836	output_format = 'profil'
	837	ENDIF
	838	ENDIF
	839	WRITE ( io, 345 ) output_format
	840	WRITE ( io, 371 ) dt_dosp
	841	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	842	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	843	( spectra_direction(i), i = 1,10 ), &
	844	( comp_spectra_level(i), i = 1,10 ), &
	845	( plot_spectra_level(i), i = 1,10 ), &
	846	averaging_interval_sp, dt_averaging_input_pr
	847	ENDIF
	848	#endif
	849
	850	WRITE ( io, 99 )
	851
	852	!
	853	!-- Physical quantities
	854	WRITE ( io, 400 )
	855
	856	!
	857	!-- Geostrophic parameters
	858	WRITE ( io, 410 ) omega, phi, f, fs
	859
	860	!
	861	!-- Other quantities
	862	WRITE ( io, 411 ) g
	863
	864	!
	865	!-- Cloud physics parameters
	866	IF ( cloud_physics ) THEN
	867	WRITE ( io, 412 )
	868	WRITE ( io, 413 ) surface_pressure, r_d, rho_surface, cp, l_v
	869	ENDIF
	870
	871	!-- Profile of the geostrophic wind (component ug)
	872	!-- Building output strings
	873	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	874	gradients = '------'
	875	slices = ' 0'
	876	coordinates = ' 0.0'
	877	i = 1
	878	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	879
	880	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
	881	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	882
	883	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
	884	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	885
	886	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
	887	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	888
	889	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
	890	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	891
	892	i = i + 1
	893	ENDDO
	894
	895	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	896	TRIM( gradients ), TRIM( slices )
	897
	898	!-- Profile of the geostrophic wind (component vg)
	899	!-- Building output strings
	900	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	901	gradients = '------'
	902	slices = ' 0'
	903	coordinates = ' 0.0'
	904	i = 1
	905	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	906
	907	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
	908	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	909
	910	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
	911	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	912
	913	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
	914	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	915
	916	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
	917	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	918
	919	i = i + 1
	920	ENDDO
	921
	922	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	923	TRIM( gradients ), TRIM( slices )
	924
	925	!
	926	!-- Initial temperature profile
	927	!-- Building output strings, starting with surface temperature
	928	WRITE ( temperatures, '(F6.2)' ) pt_surface
	929	gradients = '------'
	930	slices = ' 0'
	931	coordinates = ' 0.0'
	932	i = 1
	933	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	934
	935	WRITE (coor_chr,'(F6.2,4X)') pt_init(pt_vertical_gradient_level_ind(i))
	936	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	937
	938	WRITE (coor_chr,'(F6.2,4X)') pt_vertical_gradient(i)
	939	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	940
	941	WRITE (coor_chr,'(I6,4X)') pt_vertical_gradient_level_ind(i)
	942	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	943
	944	WRITE (coor_chr,'(F6.1,4X)') pt_vertical_gradient_level(i)
	945	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	946
	947	i = i + 1
	948	ENDDO
	949
	950	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	951	TRIM( gradients ), TRIM( slices )
	952
	953	!
	954	!-- Initial humidity profile
	955	!-- Building output strings, starting with surface humidity
	956	IF ( moisture .OR. passive_scalar ) THEN
	957	WRITE ( temperatures, '(E8.1)' ) q_surface
	958	gradients = '--------'
	959	slices = ' 0'
	960	coordinates = ' 0.0'
	961	i = 1
	962	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	963
	964	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	965	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	966
	967	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	968	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	969
	970	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	971	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	972
	973	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	974	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	975
	976	i = i + 1
	977	ENDDO
	978
	979	IF ( moisture ) THEN
	980	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	981	TRIM( gradients ), TRIM( slices )
	982	ELSE
	983	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	984	TRIM( gradients ), TRIM( slices )
	985	ENDIF
	986	ENDIF
	987
	988	!
	989	!-- LES / turbulence parameters
	990	WRITE ( io, 450 )
	991
	992	!--
	993	! ... LES-constants used must still be added here
	994	!--
	995	IF ( constant_diffusion ) THEN
	996	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	997	prandtl_number
	998	ENDIF
	999	IF ( .NOT. constant_diffusion) THEN
	1000	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1001	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1002	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1003	ENDIF
	1004
	1005	!
	1006	!-- Special actions during the run
	1007	WRITE ( io, 470 )
	1008	IF ( create_disturbances ) THEN
	1009	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1010	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1011	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1012	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1013	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1014	ELSE
	1015	WRITE ( io, 473 ) disturbance_energy_limit
	1016	ENDIF
	1017	WRITE ( io, 474 ) TRIM( random_generator )
	1018	ENDIF
	1019	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1020	WRITE ( io, 475 ) pt_surface_initial_change
	1021	ENDIF
	1022	IF ( moisture .AND. q_surface_initial_change /= 0.0 ) THEN
	1023	WRITE ( io, 476 ) q_surface_initial_change
	1024	ENDIF
	1025	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1026	WRITE ( io, 477 ) q_surface_initial_change
	1027	ENDIF
	1028
	1029	#if defined( __particles )
	1030	!
	1031	!-- Particle attributes
	1032	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1033	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
	1034	end_time_prel
	1035	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1036	IF ( random_start_position ) WRITE ( io, 481 )
	1037	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1038	WRITE ( io, 495 ) total_number_of_particles
	1039	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1040	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1041	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1042	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1043	WRITE ( io, 484 ) total_number_of_tails, minimum_tailpoint_distance,&
	1044	maximum_tailpoint_age
	1045	ENDIF
	1046	ENDIF
	1047	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1048	WRITE ( io, 485 ) dt_write_particle_data
	1049	output_format = ''
	1050	IF ( netcdf_output ) THEN
	1051	IF ( netcdf_64bit ) THEN
	1052	output_format = 'netcdf (64 bit offset) and binary'
	1053	ELSE
	1054	output_format = 'netcdf and binary'
	1055	ENDIF
	1056	ELSE
	1057	output_format = 'binary'
	1058	ENDIF
	1059	WRITE ( io, 345 ) output_format
	1060	ENDIF
	1061	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1062	IF ( write_particle_statistics ) WRITE ( io, 486 )
	1063
	1064	WRITE ( io, 487 ) number_of_particle_groups
	1065
	1066	DO i = 1, number_of_particle_groups
	1067	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1068	WRITE ( io, 490 ) i, 0.0
	1069	WRITE ( io, 492 )
	1070	ELSE
	1071	WRITE ( io, 490 ) i, radius(i)
	1072	IF ( density_ratio(i) /= 0.0 ) THEN
	1073	WRITE ( io, 491 ) density_ratio(i)
	1074	ELSE
	1075	WRITE ( io, 492 )
	1076	ENDIF
	1077	ENDIF
	1078	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1079	pdx(i), pdy(i), pdz(i)
	1080	ENDDO
	1081
	1082	#endif
	1083
	1084	!
	1085	!-- Parameters of 1D-model
	1086	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1087	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1088	mixing_length_1d, dissipation_1d
	1089	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1090	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1091	ENDIF
	1092	ENDIF
	1093
	1094	!
	1095	!-- User-defined informations
	1096	CALL user_header( io )
	1097
	1098	WRITE ( io, 99 )
	1099
	1100	#if defined( __ibm )
	1101	!
	1102	!-- Write buffer contents to disc immediately
	1103	CALL FLUSH_( io )
	1104	#elif defined( __lcmuk ) \|\| defined( __nec )
	1105	CALL FLUSH( io )
	1106	#endif
	1107
	1108	!
	1109	!-- Here the FORMATs start
	1110
	1111	99 FORMAT (1X,78('-'))
	1112	100 FORMAT (/10X,'****************',11X,28('-')/ &
	1113	10X,'* ',A12,'*',11X,A/ &
	1114	10X,'****************',11X,28('-')// &
	1115	' Date: ',A8,11X,'Run: ',A20/ &
	1116	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
	1117	' Run on host: ',A10)
	1118	#if defined( __parallel )
	1119	101 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
	1120	')',1X,A)
	1121	102 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
	1122	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
	1123	103 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1124	104 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
	1125	37X,'because the job is running on an SMP-cluster')
	1126	105 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
	1127	#endif
	1128	110 FORMAT (/' Numerical Schemes:'/ &
	1129	' -----------------'/)
	1130	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1131	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1132	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1133	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1134	' or Upstream')
	1135	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1136	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1137	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1138	' or Upstream')
	1139	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1140	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1141	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1142	' Translation velocity = ',A/ &
	1143	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1144	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1145	' of timestep changes)')
	1146	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1147	' timestep changes')
	1148	122 FORMAT (' --> Time differencing scheme: ',A)
	1149	123 FORMAT (' --> Rayleigh-Damping active, starts above z = ',F8.2,' m'/ &
	1150	' maximum damping coefficient: ',F5.3, ' 1/s')
	1151	124 FORMAT (' Spline-overshoots are being suppressed')
	1152	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1153	' of'/ &
	1154	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1155	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1156	' of'/ &
	1157	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1158	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1159	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1160	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1161	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1162	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1163	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1164	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1165	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1166	' effective emissivity scheme')
	1167	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1168	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1169	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1170	A,'-cycle)'/ &
	1171	' number of grid levels: ',I2/ &
	1172	' Gauss-Seidel red/black iterations: ',I2)
	1173	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1174	I3,')')
	1175	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1176	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1177	I3,')'/ &
	1178	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1179	I3,')')
	1180	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
	1181	139 FORMAT (' --> Prognostic equations are solved in one single loop (fast', &
	1182	' method)')
	1183	140 FORMAT (' maximum residual allowed: ',E10.3)
	1184	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1185	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1186	'step')
	1187	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
	1188	'conserved')
	1189	200 FORMAT (//' Run time and time step information:'/ &
	1190	' ----------------------------------'/)
	1191	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1192	' CFL-factor: ',F4.2)
	1193	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1194	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1195	' End time: ',F9.3,' s')
	1196	204 FORMAT ( A,F9.3,' s')
	1197	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1198	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1199	' CPU-time used: ',F9.3,' s per timestep: ', &
	1200	' ',F9.3,' s'/ &
	1201	' per second of simulated tim', &
	1202	'e: ',F9.3,' s')
	1203	250 FORMAT (//' Computational grid and domain size:'/ &
	1204	' ----------------------------------'// &
	1205	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1206	' m dz = ',F7.3,' m'/ &
	1207	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1208	' m z(u) = ',F10.3,' m'/)
	1209	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1210	' factor: ',F5.3/ &
	1211	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1212	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1213	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1214	255 FORMAT (' Subdomains have equal size')
	1215	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1216	'have smaller sizes'/ &
	1217	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1218	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1219	' degrees')
	1220	270 FORMAT (//' Topography informations:'/ &
	1221	' -----------------------'// &
	1222	1X,'Topography: ',A)
	1223	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1224	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1225	' / ',I4)
	1226	300 FORMAT (//' Boundary conditions:'/ &
	1227	' -------------------'// &
	1228	' p uv ', &
	1229	' pt'// &
	1230	' B. bound.: ',A/ &
	1231	' T. bound.: ',A)
	1232	301 FORMAT (/' e'// &
	1233	' B. bound.: ',A/ &
	1234	' T. bound.: ',A)
	1235	302 FORMAT (/' q'// &
	1236	' B. bound.: ',A/ &
	1237	' T. bound.: ',A)
[19]	1238	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1239	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1240	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1241	'computational u,v-level:'// &
[1]	1242	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1243	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1244	306 FORMAT (' Predefined constant heatflux: ',F6.3,' K m/s')
	1245	307 FORMAT (' Heatflux has a random normal distribution')
	1246	308 FORMAT (' Predefined surface temperature')
	1247	310 FORMAT (//' 1D-Model:'// &
	1248	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1249	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1250	312 FORMAT (' Predefined surface humidity')
	1251	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1252	314 FORMAT (' Predefined scalar value at the surface')
[19]	1253	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[1]	1254	317 FORMAT (//' Lateral boundaries:'/ &
	1255	' left/right: ',A/ &
	1256	' north/south: ',A)
	1257	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1258	'max =',F5.1,' m**2/s')
	1259	320 FORMAT (//' List output:'/ &
	1260	' -----------'// &
	1261	' 1D-Profiles:'/ &
	1262	' Output every ',F8.2,' s')
	1263	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
	1264	' Averaging input every ',F8.2,' s')
	1265	330 FORMAT (//' Data output:'/ &
	1266	' -----------'/)
	1267	331 FORMAT (/' 1D-Profiles:')
	1268	332 FORMAT (/' ',A)
	1269	333 FORMAT (' Output every ',F8.2,' s',/ &
	1270	' Time averaged over ',F8.2,' s'/ &
	1271	' Averaging input every ',F8.2,' s')
	1272	334 FORMAT (/' 2D-Arrays',A,':')
	1273	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1274	' Output every ',F8.2,' s ',A/ &
	1275	' Cross sections at ',A1,' = ',A/ &
	1276	' scalar-coordinates: ',A,' m'/)
	1277	336 FORMAT (/' 3D-Arrays',A,':')
	1278	337 FORMAT (/' Arrays: ',A/ &
	1279	' Output every ',F8.2,' s ',A/ &
	1280	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1281	338 FORMAT (' Compressed data output'/ &
	1282	' Decimal precision: ',A/)
	1283	339 FORMAT (' No output during initial ',F8.2,' s')
	1284	340 FORMAT (/' Time series:')
	1285	341 FORMAT (' Output every ',F8.2,' s'/)
	1286	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1287	' Output every ',F8.2,' s ',A/ &
	1288	' Time averaged over ',F8.2,' s'/ &
	1289	' Averaging input every ',F8.2,' s'/ &
	1290	' Cross sections at ',A1,' = ',A/ &
	1291	' scalar-coordinates: ',A,' m'/)
	1292	343 FORMAT (/' Arrays: ',A/ &
	1293	' Output every ',F8.2,' s ',A/ &
	1294	' Time averaged over ',F8.2,' s'/ &
	1295	' Averaging input every ',F8.2,' s'/ &
	1296	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1297	345 FORMAT (' Output format: ',A/)
	1298	#if defined( __dvrp_graphics )
	1299	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1300	' Output every ',F7.1,' s'/ &
	1301	' Output mode: ',A/ &
	1302	' Host / User: ',A,' / ',A/ &
	1303	' Directory: ',A// &
	1304	' The sequence contains:')
	1305	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1306	362 FORMAT (' Sectional plane ',A)
	1307	363 FORMAT (' Particles')
	1308	#endif
	1309	#if defined( __spectra )
	1310	370 FORMAT (' Spectra:')
	1311	371 FORMAT (' Output every ',F7.1,' s'/)
	1312	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1313	' Directions: ', 10(A5,',')/ &
	1314	' height levels k = ', 9(I3,','),I3,'.'/ &
	1315	' height levels selected for standard plot:'/ &
	1316	' k = ', 9(I3,','),I3,'.'/ &
	1317	' Time averaged over ', F7.1, ' s,' / &
	1318	' Profiles for the time averaging are taken every ', &
	1319	F6.1,' s')
	1320	#endif
	1321	400 FORMAT (//' Physical quantities:'/ &
	1322	' -------------------'/)
	1323	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1324	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1325	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1326	' f* = ',F9.6,' 1/s')
	1327	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
	1328	412 FORMAT (/' Cloud physics parameters:'/ &
	1329	' ------------------------'/)
	1330	413 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
	1331	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1332	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1333	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1334	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1335	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1336	' Height: ',A,' m'/ &
	1337	' Temperature: ',A,' K'/ &
	1338	' Gradient: ',A,' K/100m'/ &
	1339	' Gridpoint: ',A)
	1340	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1341	' Height: ',A,' m'/ &
	1342	' Humidity: ',A,' kg/kg'/ &
	1343	' Gradient: ',A,' (kg/kg)/100m'/ &
	1344	' Gridpoint: ',A)
	1345	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1346	' Height: ',A,' m'/ &
	1347	' Scalar concentration: ',A,' kg/m**3'/ &
	1348	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1349	' Gridpoint: ',A)
	1350	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1351	' Height: ',A,' m'/ &
	1352	' ug: ',A,' m/s'/ &
	1353	' Gradient: ',A,' 1/100s'/ &
	1354	' Gridpoint: ',A)
	1355	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1356	' Height: ',A,' m'/ &
	1357	' vg: ',A,' m/S'/ &
	1358	' Gradient: ',A,' 1/100s'/ &
	1359	' Gridpoint: ',A)
	1360	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1361	' ---------------------------'/)
	1362	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1363	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1364	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1365	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1366	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1367	470 FORMAT (//' Actions during the simulation:'/ &
	1368	' -----------------------------'/)
	1369	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1370	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1371	' Lower disturbance level : ',F7.2,' m (GP ',I4,')'/ &
	1372	' Upper disturbance level : ',F7.2,' m (GP ',I4,')')
	1373	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1374	' to i/j =',I4)
	1375	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1376	1X,F5.3, ' m2/s2')
	1377	474 FORMAT (' Random number generator used : ',A/)
	1378	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1379	'respectively, if'/ &
	1380	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1381	' 3D-simulation'/)
	1382	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1383	'respectively, if the'/ &
	1384	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1385	' the 3D-simulation'/)
	1386	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1387	'respectively, if the'/ &
	1388	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1389	' the 3D-simulation'/)
	1390	#if defined( __particles )
	1391	480 FORMAT (' Particles:'/ &
	1392	' ---------'// &
	1393	' Particle advection is active (switched on at t = ', F7.1, &
	1394	' s)'/ &
	1395	' Start of new particle generations every ',F6.1,' s'/ &
	1396	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1397	' bottom: ', A, ' top: ', A/&
	1398	' Maximum particle age: ',F9.1,' s'/ &
	1399	' Advection stopped at t = ',F9.1,' s'/)
	1400	481 FORMAT (' Particles have random start positions'/)
	1401	482 FORMAT (' Particles are advected only horizontally'/)
	1402	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1403	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1404	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1405	' Maximum age of the end of the tail: ',F8.2,' s')
	1406	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1407	486 FORMAT (' Particle statistics are written on file'/)
	1408	487 FORMAT (' Number of particle groups: ',I2/)
	1409	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1410	' minimum timestep for advection: ', F7.5/)
	1411	489 FORMAT (' Number of particles simultaneously released at each ', &
	1412	'point: ', I5/)
	1413	490 FORMAT (' Particle group ',I2,':'/ &
	1414	' Particle radius: ',E10.3, 'm')
	1415	491 FORMAT (' Particle inertia is activated'/ &
	1416	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1417	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1418	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1419	' y:',F8.1,' - ',F8.1,' m'/&
	1420	' z:',F8.1,' - ',F8.1,' m'/&
	1421	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1422	' m dz = ',F8.1,' m'/)
	1423	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1424	F8.2,' s'/)
	1425	495 FORMAT (' Number of particles in total domain: ',I10/)
	1426	#endif
	1427	500 FORMAT (//' 1D-Model parameters:'/ &
	1428	' -------------------'// &
	1429	' Simulation time: ',F8.1,' s'/ &
	1430	' Run-controll output every: ',F8.1,' s'/ &
	1431	' Vertical profile output every: ',F8.1,' s'/ &
	1432	' Mixing length calculation: ',A/ &
	1433	' Dissipation calculation: ',A/)
	1434	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1435
	1436
	1437	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |