Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 30

Last change on this file since 30 was 19, checked in by raasch, 18 years ago
preliminary version of modified boundary conditions at top
Property svn:keywords set to `Id`
File size: 54.3 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
	6	!
	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: header.f90 19 2007-02-23 04:53:48Z raasch $
	11	! RCS Log replace by Id keyword, revision history cleaned up
	12	!
[1]	13	! Revision 1.63 2006/08/22 13:53:13 raasch
	14	! Output of dz_max
	15	!
	16	! Revision 1.1 1997/08/11 06:17:20 raasch
	17	! Initial revision
	18	!
	19	!
	20	! Description:
	21	! ------------
	22	! Writing a header with all important informations about the actual run.
	23	! This subroutine is called three times, two times at the beginning
	24	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	25	! end of the run, then writing additional information about CPU-usage on file
	26	! header.
	27	!------------------------------------------------------------------------------!
	28
	29	USE arrays_3d
	30	USE control_parameters
	31	USE cloud_parameters
	32	USE cpulog
	33	USE dvrp_variables
	34	USE grid_variables
	35	USE indices
	36	USE model_1d
	37	USE particle_attributes
	38	USE pegrid
	39	USE spectrum
	40
	41	IMPLICIT NONE
	42
	43	CHARACTER (LEN=1) :: prec
	44	CHARACTER (LEN=2) :: do2d_mode
	45	CHARACTER (LEN=5) :: section_chr
	46	CHARACTER (LEN=9) :: time_to_string
	47	CHARACTER (LEN=10) :: coor_chr, host_chr
	48	CHARACTER (LEN=16) :: begin_chr
	49	CHARACTER (LEN=40) :: output_format
	50	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
	51	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
	52	run_classification, slices, temperatures, &
	53	ugcomponent, vgcomponent
	54	CHARACTER (LEN=85) :: roben, runten
	55
	56	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
	57	REAL :: cpuseconds_per_simulated_second
	58
	59	!
	60	!-- Open the output file. At the end of the simulation, output is directed
	61	!-- to unit 19.
	62	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	63	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	64	io = 15 ! header output on file RUN_CONTROL
	65	ELSE
	66	io = 19 ! header output on file HEADER
	67	ENDIF
	68	CALL check_open( io )
	69
	70	!
	71	!-- At the end of the run, output file (HEADER) will be rewritten with
	72	!-- new informations
	73	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	74
	75	!
	76	!-- Determine kind of model run
	77	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	78	run_classification = '3D - restart run'
	79	ELSE
	80	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	81	run_classification = '3D - run without 1D - prerun'
	82	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	83	run_classification = '3D - run with 1D - prerun'
	84	ELSE
	85	PRINT*,'+++ header: unknown action(s): ',initializing_actions
	86	ENDIF
	87	ENDIF
	88
	89	!
	90	!-- Run-identification, date, time, host
	91	host_chr = host(1:10)
	92	WRITE ( io, 100 ) version, TRIM( run_classification ), run_date, &
	93	run_identifier, run_time, runnr, ADJUSTR( host_chr )
	94	#if defined( __parallel )
	95	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	96	char1 = 'calculated'
	97	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	98	host(1:2) == 'lc' ) .AND. &
	99	npex == -1 .AND. pdims(2) == 1 ) THEN
	100	char1 = 'forced'
	101	ELSE
	102	char1 = 'predefined'
	103	ENDIF
	104	IF ( threads_per_task == 1 ) THEN
	105	WRITE ( io, 101 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
	106	ELSE
	107	WRITE ( io, 102 ) numprocs*threads_per_task, numprocs, &
	108	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	109	ENDIF
	110	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	111	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	112	npex == -1 .AND. pdims(2) == 1 ) &
	113	THEN
	114	WRITE ( io, 104 )
	115	ELSEIF ( pdims(2) == 1 ) THEN
	116	WRITE ( io, 105 ) 'x'
	117	ELSEIF ( pdims(1) == 1 ) THEN
	118	WRITE ( io, 105 ) 'y'
	119	ENDIF
	120	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 103 )
	121	#endif
	122	WRITE ( io, 99 )
	123
	124	!
	125	!-- Numerical schemes
	126	WRITE ( io, 110 )
	127	IF ( psolver(1:7) == 'poisfft' ) THEN
	128	WRITE ( io, 111 ) TRIM( fft_method )
	129	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	130	ELSEIF ( psolver == 'sor' ) THEN
	131	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	132	ELSEIF ( psolver == 'multigrid' ) THEN
	133	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	134	IF ( mg_cycles == -1 ) THEN
	135	WRITE ( io, 140 ) residual_limit
	136	ELSE
	137	WRITE ( io, 141 ) mg_cycles
	138	ENDIF
	139	IF ( mg_switch_to_pe0_level == 0 ) THEN
	140	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	141	nzt_mg(1)
	142	ELSE
	143	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	144	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	145	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	146	nzt_mg(mg_switch_to_pe0_level), &
	147	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	148	nzt_mg(1)
	149	ENDIF
	150	ENDIF
	151	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	152	THEN
	153	WRITE ( io, 142 )
	154	ENDIF
	155
	156	IF ( momentum_advec == 'pw-scheme' ) THEN
	157	WRITE ( io, 113 )
	158	ELSE
	159	WRITE ( io, 114 )
	160	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	161	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	162	overshoot_limit_w /= 0.0 ) THEN
	163	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	164	overshoot_limit_w
	165	ENDIF
	166	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	167	ups_limit_w /= 0.0 ) &
	168	THEN
	169	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	170	ENDIF
	171	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	172	ENDIF
	173	IF ( scalar_advec == 'pw-scheme' ) THEN
	174	WRITE ( io, 116 )
	175	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	176	WRITE ( io, 117 )
	177	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	178	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	179	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	180	ENDIF
	181	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	182	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	183	ENDIF
	184	ELSE
	185	WRITE ( io, 118 )
	186	ENDIF
	187	IF ( momentum_advec /= 'ups-scheme' .AND. scalar_advec /= 'ups-scheme' &
	188	.AND. scalar_advec /= 'bc-scheme' .AND. host(1:3) /= 'nec' ) THEN
	189	WRITE ( io, 139 )
	190	ENDIF
	191	IF ( galilei_transformation ) THEN
	192	IF ( use_ug_for_galilei_tr ) THEN
	193	char1 = 'geostrophic wind'
	194	ELSE
	195	char1 = 'mean wind in model domain'
	196	ENDIF
	197	IF ( simulated_time_at_begin == simulated_time ) THEN
	198	char2 = 'at the start of the run'
	199	ELSE
	200	char2 = 'at the end of the run'
	201	ENDIF
	202	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	203	advected_distance_x/1000.0, advected_distance_y/1000.0
	204	ENDIF
	205	IF ( timestep_scheme == 'leapfrog' ) THEN
	206	WRITE ( io, 120 )
	207	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	208	WRITE ( io, 121 )
	209	ELSE
	210	WRITE ( io, 122 ) timestep_scheme
	211	ENDIF
	212	IF ( rayleigh_damping_factor /= 0.0 ) THEN
	213	WRITE ( io, 123 ) rayleigh_damping_height, rayleigh_damping_factor
	214	ENDIF
	215	IF ( moisture ) THEN
	216	IF ( .NOT. cloud_physics ) THEN
	217	WRITE ( io, 129 )
	218	ELSE
	219	WRITE ( io, 130 )
	220	WRITE ( io, 131 )
	221	IF ( radiation ) WRITE ( io, 132 )
	222	IF ( precipitation ) WRITE ( io, 133 )
	223	ENDIF
	224	ENDIF
	225	IF ( passive_scalar ) WRITE ( io, 134 )
	226	IF ( conserve_volume_flow ) WRITE ( io, 150 )
	227	WRITE ( io, 99 )
	228
	229	!
	230	!-- Runtime and timestep informations
	231	WRITE ( io, 200 )
	232	IF ( .NOT. dt_fixed ) THEN
	233	WRITE ( io, 201 ) dt_max, cfl_factor
	234	ELSE
	235	WRITE ( io, 202 ) dt
	236	ENDIF
	237	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	238
	239	IF ( time_restart /= 9999999.9 .AND. &
	240	simulated_time_at_begin == simulated_time ) THEN
	241	IF ( dt_restart == 9999999.9 ) THEN
	242	WRITE ( io, 204 ) ' Restart at: ',time_restart
	243	ELSE
	244	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	245	ENDIF
	246	ENDIF
	247
	248	IF ( simulated_time_at_begin /= simulated_time ) THEN
	249	i = MAX ( log_point_s(10)%counts, 1 )
	250	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	251	cpuseconds_per_simulated_second = 0.0
	252	ELSE
	253	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	254	( simulated_time - &
	255	simulated_time_at_begin )
	256	ENDIF
	257	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	258	log_point_s(10)%sum / REAL( i ), &
	259	cpuseconds_per_simulated_second
	260	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	261	IF ( dt_restart == 9999999.9 ) THEN
	262	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	263	ELSE
	264	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	265	ENDIF
	266	ENDIF
	267	ENDIF
	268
	269	!
	270	!-- Computational grid
	271	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	272	IF ( dz_stretch_level_index < nzt+1 ) THEN
	273	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	274	dz_stretch_factor, dz_max
	275	ENDIF
	276	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	277	MIN( nnz+2, nzt+2 )
	278	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	279	WRITE ( io, 255 )
	280	ELSE
	281	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	282	ENDIF
	283	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	284
	285	!
	286	!-- Topography
	287	WRITE ( io, 270 ) topography
	288	SELECT CASE ( TRIM( topography ) )
	289
	290	CASE ( 'flat' )
	291	! no actions necessary
	292
	293	CASE ( 'single_building' )
	294	blx = INT( building_length_x / dx )
	295	bly = INT( building_length_y / dy )
	296	bh = INT( building_height / dz )
	297
	298	IF ( building_wall_left == 9999999.9 ) THEN
	299	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	300	ENDIF
	301	bxl = INT ( building_wall_left / dx + 0.5 )
	302	bxr = bxl + blx
	303
	304	IF ( building_wall_south == 9999999.9 ) THEN
	305	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	306	ENDIF
	307	bys = INT ( building_wall_south / dy + 0.5 )
	308	byn = bys + bly
	309
	310	WRITE ( io, 271 ) building_length_x, building_length_y, &
	311	building_height, bxl, bxr, bys, byn
	312
	313	END SELECT
	314
	315	!
	316	!-- Boundary conditions
	317	IF ( ibc_p_b == 0 ) THEN
	318	runten = 'p(0) = 0 \|'
	319	ELSEIF ( ibc_p_b == 1 ) THEN
	320	runten = 'p(0) = p(1) \|'
	321	ELSE
	322	runten = 'p(0) = p(1) +R\|'
	323	ENDIF
	324	IF ( ibc_p_t == 0 ) THEN
	325	roben = 'p(nzt+1) = 0 \|'
	326	ELSE
	327	roben = 'p(nzt+1) = p(nzt) \|'
	328	ENDIF
	329
	330	IF ( ibc_uv_b == 0 ) THEN
	331	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	332	ELSE
	333	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	334	ENDIF
	335	IF ( ibc_uv_t == 0 ) THEN
	336	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	337	ELSE
	338	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	339	ENDIF
	340
	341	IF ( ibc_pt_b == 0 ) THEN
	342	runten = TRIM( runten ) // ' pt(0) = pt_surface'
	343	ELSE
	344	runten = TRIM( runten ) // ' pt(0) = pt(1)'
	345	ENDIF
	346	IF ( ibc_pt_t == 0 ) THEN
[19]	347	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	348	ELSEIF( ibc_pt_t == 1 ) THEN
	349	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	350	ELSEIF( ibc_pt_t == 2 ) THEN
	351	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	352	ENDIF
	353
	354	WRITE ( io, 300 ) runten, roben
	355
	356	IF ( .NOT. constant_diffusion ) THEN
	357	IF ( ibc_e_b == 1 ) THEN
	358	runten = 'e(0) = e(1)'
	359	ELSE
	360	runten = 'e(0) = e(1) = (u/0.1)*2'
	361	ENDIF
	362	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	363
	364	WRITE ( io, 301 ) runten, roben
	365
	366	ENDIF
	367
	368	IF ( moisture .OR. passive_scalar ) THEN
	369	IF ( moisture ) THEN
	370	IF ( ibc_q_b == 0 ) THEN
	371	runten = 'q(0) = q_surface'
	372	ELSE
	373	runten = 'q(0) = q(1)'
	374	ENDIF
	375	IF ( ibc_q_t == 0 ) THEN
	376	roben = 'q(nzt) = q_top'
	377	ELSE
	378	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	379	ENDIF
	380	ELSE
	381	IF ( ibc_q_b == 0 ) THEN
	382	runten = 's(0) = s_surface'
	383	ELSE
	384	runten = 's(0) = s(1)'
	385	ENDIF
	386	IF ( ibc_q_t == 0 ) THEN
	387	roben = 's(nzt) = s_top'
	388	ELSE
	389	roben = 's(nzt) = s(nzt-1) + ds/dz'
	390	ENDIF
	391	ENDIF
	392
	393	WRITE ( io, 302 ) runten, roben
	394
	395	ENDIF
	396
	397	IF ( use_surface_fluxes ) THEN
	398	WRITE ( io, 303 )
	399	IF ( constant_heatflux ) THEN
	400	WRITE ( io, 306 ) surface_heatflux
	401	IF ( random_heatflux ) WRITE ( io, 307 )
	402	ENDIF
	403	IF ( moisture .AND. constant_waterflux ) THEN
	404	WRITE ( io, 311 ) surface_waterflux
	405	ENDIF
	406	IF ( passive_scalar .AND. constant_waterflux ) THEN
	407	WRITE ( io, 313 ) surface_waterflux
	408	ENDIF
	409	ENDIF
	410
[19]	411	IF ( use_top_fluxes ) THEN
	412	WRITE ( io, 304 )
	413	IF ( constant_top_heatflux ) THEN
	414	WRITE ( io, 306 ) top_heatflux
	415	ENDIF
	416	IF ( moisture .OR. passive_scalar ) THEN
	417	WRITE ( io, 315 )
	418	ENDIF
	419	ENDIF
	420
[1]	421	IF ( prandtl_layer ) THEN
	422	WRITE ( io, 305 ) zu(1), roughness_length, kappa, rif_min, rif_max
	423	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
	424	IF ( moisture .AND. .NOT. constant_waterflux ) THEN
	425	WRITE ( io, 312 )
	426	ENDIF
	427	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	428	WRITE ( io, 314 )
	429	ENDIF
	430	ELSE
	431	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	432	WRITE ( io, 310 ) rif_min, rif_max
	433	ENDIF
	434	ENDIF
	435
	436	WRITE ( io, 317 ) bc_lr, bc_ns
	437	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	438	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
	439	ENDIF
	440
	441	!
	442	!-- Listing of 1D-profiles
	443	WRITE ( io, 320 ) dt_dopr_listing
	444	IF ( averaging_interval_pr /= 0.0 ) THEN
	445	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	446	ENDIF
	447
	448	!
	449	!-- DATA output
	450	WRITE ( io, 330 )
	451	IF ( averaging_interval_pr /= 0.0 ) THEN
	452	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	453	ENDIF
	454
	455	!
	456	!-- 1D-profiles
	457	dopr_chr = 'Profile:'
	458	IF ( dopr_n /= 0 ) THEN
	459	WRITE ( io, 331 )
	460
	461	output_format = ''
	462	IF ( netcdf_output ) THEN
	463	IF ( netcdf_64bit ) THEN
	464	output_format = 'netcdf (64 bit offset)'
	465	ELSE
	466	output_format = 'netcdf'
	467	ENDIF
	468	ENDIF
	469	IF ( profil_output ) THEN
	470	IF ( netcdf_output ) THEN
	471	output_format = TRIM( output_format ) // ' and profil'
	472	ELSE
	473	output_format = 'profil'
	474	ENDIF
	475	ENDIF
	476	WRITE ( io, 345 ) output_format
	477
	478	DO i = 1, dopr_n
	479	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	480	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	481	WRITE ( io, 332 ) dopr_chr
	482	dopr_chr = ' :'
	483	ENDIF
	484	ENDDO
	485
	486	IF ( dopr_chr /= '' ) THEN
	487	WRITE ( io, 332 ) dopr_chr
	488	ENDIF
	489	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	490	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	491	ENDIF
	492
	493	!
	494	!-- 2D-arrays
	495	DO av = 0, 1
	496
	497	i = 1
	498	do2d_xy = ''
	499	do2d_xz = ''
	500	do2d_yz = ''
	501	DO WHILE ( do2d(av,i) /= ' ' )
	502
	503	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	504	do2d_mode = do2d(av,i)(l-1:l)
	505
	506	SELECT CASE ( do2d_mode )
	507	CASE ( 'xy' )
	508	ll = LEN_TRIM( do2d_xy )
	509	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	510	CASE ( 'xz' )
	511	ll = LEN_TRIM( do2d_xz )
	512	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	513	CASE ( 'yz' )
	514	ll = LEN_TRIM( do2d_yz )
	515	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	516	END SELECT
	517
	518	i = i + 1
	519
	520	ENDDO
	521
	522	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	523	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	524	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	525	( netcdf_output .OR. iso2d_output ) ) THEN
	526
	527	IF ( av == 0 ) THEN
	528	WRITE ( io, 334 ) ''
	529	ELSE
	530	WRITE ( io, 334 ) '(time-averaged)'
	531	ENDIF
	532
	533	IF ( do2d_at_begin ) THEN
	534	begin_chr = 'and at the start'
	535	ELSE
	536	begin_chr = ''
	537	ENDIF
	538
	539	output_format = ''
	540	IF ( netcdf_output ) THEN
	541	IF ( netcdf_64bit ) THEN
	542	output_format = 'netcdf (64 bit offset)'
	543	ELSE
	544	output_format = 'netcdf'
	545	ENDIF
	546	ENDIF
	547	IF ( iso2d_output ) THEN
	548	IF ( netcdf_output ) THEN
	549	output_format = TRIM( output_format ) // ' and iso2d'
	550	ELSE
	551	output_format = 'iso2d'
	552	ENDIF
	553	ENDIF
	554	WRITE ( io, 345 ) output_format
	555
	556	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	557	i = 1
	558	slices = '/'
	559	coordinates = '/'
	560	!
	561	!-- Building strings with index and coordinate informations of the
	562	!-- slices
	563	DO WHILE ( section(i,1) /= -9999 )
	564
	565	WRITE (section_chr,'(I5)') section(i,1)
	566	section_chr = ADJUSTL( section_chr )
	567	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	568
	569	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	570	coor_chr = ADJUSTL( coor_chr )
	571	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	572
	573	i = i + 1
	574	ENDDO
	575	IF ( av == 0 ) THEN
	576	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	577	TRIM( begin_chr ), 'k', TRIM( slices ), &
	578	TRIM( coordinates )
	579	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	580	WRITE ( io, 339 ) skip_time_do2d_xy
	581	ENDIF
	582	ELSE
	583	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	584	TRIM( begin_chr ), averaging_interval, &
	585	dt_averaging_input, 'k', TRIM( slices ), &
	586	TRIM( coordinates )
	587	IF ( skip_time_data_output_av /= 0.0 ) THEN
	588	WRITE ( io, 339 ) skip_time_data_output_av
	589	ENDIF
	590	ENDIF
	591
	592	ENDIF
	593
	594	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	595	i = 1
	596	slices = '/'
	597	coordinates = '/'
	598	!
	599	!-- Building strings with index and coordinate informations of the
	600	!-- slices
	601	DO WHILE ( section(i,2) /= -9999 )
	602
	603	WRITE (section_chr,'(I5)') section(i,2)
	604	section_chr = ADJUSTL( section_chr )
	605	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	606
	607	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	608	coor_chr = ADJUSTL( coor_chr )
	609	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	610
	611	i = i + 1
	612	ENDDO
	613	IF ( av == 0 ) THEN
	614	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	615	TRIM( begin_chr ), 'j', TRIM( slices ), &
	616	TRIM( coordinates )
	617	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	618	WRITE ( io, 339 ) skip_time_do2d_xz
	619	ENDIF
	620	ELSE
	621	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	622	TRIM( begin_chr ), averaging_interval, &
	623	dt_averaging_input, 'j', TRIM( slices ), &
	624	TRIM( coordinates )
	625	IF ( skip_time_data_output_av /= 0.0 ) THEN
	626	WRITE ( io, 339 ) skip_time_data_output_av
	627	ENDIF
	628	ENDIF
	629	ENDIF
	630
	631	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	632	i = 1
	633	slices = '/'
	634	coordinates = '/'
	635	!
	636	!-- Building strings with index and coordinate informations of the
	637	!-- slices
	638	DO WHILE ( section(i,3) /= -9999 )
	639
	640	WRITE (section_chr,'(I5)') section(i,3)
	641	section_chr = ADJUSTL( section_chr )
	642	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	643
	644	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	645	coor_chr = ADJUSTL( coor_chr )
	646	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	647
	648	i = i + 1
	649	ENDDO
	650	IF ( av == 0 ) THEN
	651	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	652	TRIM( begin_chr ), 'i', TRIM( slices ), &
	653	TRIM( coordinates )
	654	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	655	WRITE ( io, 339 ) skip_time_do2d_yz
	656	ENDIF
	657	ELSE
	658	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	659	TRIM( begin_chr ), averaging_interval, &
	660	dt_averaging_input, 'i', TRIM( slices ), &
	661	TRIM( coordinates )
	662	IF ( skip_time_data_output_av /= 0.0 ) THEN
	663	WRITE ( io, 339 ) skip_time_data_output_av
	664	ENDIF
	665	ENDIF
	666	ENDIF
	667
	668	ENDIF
	669
	670	ENDDO
	671
	672	!
	673	!-- 3d-arrays
	674	DO av = 0, 1
	675
	676	i = 1
	677	do3d_chr = ''
	678	DO WHILE ( do3d(av,i) /= ' ' )
	679
	680	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	681	i = i + 1
	682
	683	ENDDO
	684
	685	IF ( do3d_chr /= '' ) THEN
	686	IF ( av == 0 ) THEN
	687	WRITE ( io, 336 ) ''
	688	ELSE
	689	WRITE ( io, 336 ) '(time-averaged)'
	690	ENDIF
	691
	692	output_format = ''
	693	IF ( netcdf_output ) THEN
	694	IF ( netcdf_64bit ) THEN
	695	output_format = 'netcdf (64 bit offset)'
	696	ELSE
	697	output_format = 'netcdf'
	698	ENDIF
	699	ENDIF
	700	IF ( avs_output ) THEN
	701	IF ( netcdf_output ) THEN
	702	output_format = TRIM( output_format ) // ' and avs'
	703	ELSE
	704	output_format = 'avs'
	705	ENDIF
	706	ENDIF
	707	WRITE ( io, 345 ) output_format
	708
	709	IF ( do3d_at_begin ) THEN
	710	begin_chr = 'and at the start'
	711	ELSE
	712	begin_chr = ''
	713	ENDIF
	714	IF ( av == 0 ) THEN
	715	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	716	zu(nz_do3d), nz_do3d
	717	ELSE
	718	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	719	TRIM( begin_chr ), averaging_interval, &
	720	dt_averaging_input, zu(nz_do3d), nz_do3d
	721	ENDIF
	722
	723	IF ( do3d_compress ) THEN
	724	do3d_chr = ''
	725	i = 1
	726	DO WHILE ( do3d(av,i) /= ' ' )
	727
	728	SELECT CASE ( do3d(av,i) )
	729	CASE ( 'u' )
	730	j = 1
	731	CASE ( 'v' )
	732	j = 2
	733	CASE ( 'w' )
	734	j = 3
	735	CASE ( 'p' )
	736	j = 4
	737	CASE ( 'pt' )
	738	j = 5
	739	END SELECT
	740	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	741	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	742	':' // prec // ','
	743	i = i + 1
	744
	745	ENDDO
	746	WRITE ( io, 338 ) do3d_chr
	747
	748	ENDIF
	749
	750	IF ( av == 0 ) THEN
	751	IF ( skip_time_do3d /= 0.0 ) THEN
	752	WRITE ( io, 339 ) skip_time_do3d
	753	ENDIF
	754	ELSE
	755	IF ( skip_time_data_output_av /= 0.0 ) THEN
	756	WRITE ( io, 339 ) skip_time_data_output_av
	757	ENDIF
	758	ENDIF
	759
	760	ENDIF
	761
	762	ENDDO
	763
	764	!
	765	!-- Timeseries
	766	IF ( dt_dots /= 9999999.9 ) THEN
	767	WRITE ( io, 340 )
	768
	769	output_format = ''
	770	IF ( netcdf_output ) THEN
	771	IF ( netcdf_64bit ) THEN
	772	output_format = 'netcdf (64 bit offset)'
	773	ELSE
	774	output_format = 'netcdf'
	775	ENDIF
	776	ENDIF
	777	IF ( profil_output ) THEN
	778	IF ( netcdf_output ) THEN
	779	output_format = TRIM( output_format ) // ' and profil'
	780	ELSE
	781	output_format = 'profil'
	782	ENDIF
	783	ENDIF
	784	WRITE ( io, 345 ) output_format
	785	WRITE ( io, 341 ) dt_dots
	786	ENDIF
	787
	788	#if defined( __dvrp_graphics )
	789	!
	790	!-- Dvrp-output
	791	IF ( dt_dvrp /= 9999999.9 ) THEN
	792	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	793	TRIM( dvrp_username ), TRIM( dvrp_directory )
	794	i = 1
	795	l = 0
	796	DO WHILE ( mode_dvrp(i) /= ' ' )
	797	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
	798	READ ( mode_dvrp(i), '(10X,I1)' ) j
	799	l = l + 1
	800	IF ( do3d(0,j) /= ' ' ) THEN
	801	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	802	ENDIF
	803	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
	804	READ ( mode_dvrp(i), '(6X,I1)' ) j
	805	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	806	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	807	WRITE ( io, 363 )
	808	ENDIF
	809	i = i + 1
	810	ENDDO
	811	ENDIF
	812	#endif
	813
	814	#if defined( __spectra )
	815	!
	816	!-- Spectra output
	817	IF ( dt_dosp /= 9999999.9 ) THEN
	818	WRITE ( io, 370 )
	819
	820	output_format = ''
	821	IF ( netcdf_output ) THEN
	822	IF ( netcdf_64bit ) THEN
	823	output_format = 'netcdf (64 bit offset)'
	824	ELSE
	825	output_format = 'netcdf'
	826	ENDIF
	827	ENDIF
	828	IF ( profil_output ) THEN
	829	IF ( netcdf_output ) THEN
	830	output_format = TRIM( output_format ) // ' and profil'
	831	ELSE
	832	output_format = 'profil'
	833	ENDIF
	834	ENDIF
	835	WRITE ( io, 345 ) output_format
	836	WRITE ( io, 371 ) dt_dosp
	837	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	838	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	839	( spectra_direction(i), i = 1,10 ), &
	840	( comp_spectra_level(i), i = 1,10 ), &
	841	( plot_spectra_level(i), i = 1,10 ), &
	842	averaging_interval_sp, dt_averaging_input_pr
	843	ENDIF
	844	#endif
	845
	846	WRITE ( io, 99 )
	847
	848	!
	849	!-- Physical quantities
	850	WRITE ( io, 400 )
	851
	852	!
	853	!-- Geostrophic parameters
	854	WRITE ( io, 410 ) omega, phi, f, fs
	855
	856	!
	857	!-- Other quantities
	858	WRITE ( io, 411 ) g
	859
	860	!
	861	!-- Cloud physics parameters
	862	IF ( cloud_physics ) THEN
	863	WRITE ( io, 412 )
	864	WRITE ( io, 413 ) surface_pressure, r_d, rho_surface, cp, l_v
	865	ENDIF
	866
	867	!-- Profile of the geostrophic wind (component ug)
	868	!-- Building output strings
	869	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	870	gradients = '------'
	871	slices = ' 0'
	872	coordinates = ' 0.0'
	873	i = 1
	874	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	875
	876	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
	877	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	878
	879	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
	880	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	881
	882	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
	883	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	884
	885	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
	886	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	887
	888	i = i + 1
	889	ENDDO
	890
	891	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	892	TRIM( gradients ), TRIM( slices )
	893
	894	!-- Profile of the geostrophic wind (component vg)
	895	!-- Building output strings
	896	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	897	gradients = '------'
	898	slices = ' 0'
	899	coordinates = ' 0.0'
	900	i = 1
	901	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	902
	903	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
	904	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	905
	906	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
	907	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	908
	909	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
	910	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	911
	912	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
	913	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	914
	915	i = i + 1
	916	ENDDO
	917
	918	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	919	TRIM( gradients ), TRIM( slices )
	920
	921	!
	922	!-- Initial temperature profile
	923	!-- Building output strings, starting with surface temperature
	924	WRITE ( temperatures, '(F6.2)' ) pt_surface
	925	gradients = '------'
	926	slices = ' 0'
	927	coordinates = ' 0.0'
	928	i = 1
	929	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	930
	931	WRITE (coor_chr,'(F6.2,4X)') pt_init(pt_vertical_gradient_level_ind(i))
	932	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	933
	934	WRITE (coor_chr,'(F6.2,4X)') pt_vertical_gradient(i)
	935	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	936
	937	WRITE (coor_chr,'(I6,4X)') pt_vertical_gradient_level_ind(i)
	938	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	939
	940	WRITE (coor_chr,'(F6.1,4X)') pt_vertical_gradient_level(i)
	941	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	942
	943	i = i + 1
	944	ENDDO
	945
	946	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	947	TRIM( gradients ), TRIM( slices )
	948
	949	!
	950	!-- Initial humidity profile
	951	!-- Building output strings, starting with surface humidity
	952	IF ( moisture .OR. passive_scalar ) THEN
	953	WRITE ( temperatures, '(E8.1)' ) q_surface
	954	gradients = '--------'
	955	slices = ' 0'
	956	coordinates = ' 0.0'
	957	i = 1
	958	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	959
	960	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	961	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	962
	963	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	964	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	965
	966	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	967	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	968
	969	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	970	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	971
	972	i = i + 1
	973	ENDDO
	974
	975	IF ( moisture ) THEN
	976	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	977	TRIM( gradients ), TRIM( slices )
	978	ELSE
	979	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	980	TRIM( gradients ), TRIM( slices )
	981	ENDIF
	982	ENDIF
	983
	984	!
	985	!-- LES / turbulence parameters
	986	WRITE ( io, 450 )
	987
	988	!--
	989	! ... LES-constants used must still be added here
	990	!--
	991	IF ( constant_diffusion ) THEN
	992	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	993	prandtl_number
	994	ENDIF
	995	IF ( .NOT. constant_diffusion) THEN
	996	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	997	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	998	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	999	ENDIF
	1000
	1001	!
	1002	!-- Special actions during the run
	1003	WRITE ( io, 470 )
	1004	IF ( create_disturbances ) THEN
	1005	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1006	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1007	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1008	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1009	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1010	ELSE
	1011	WRITE ( io, 473 ) disturbance_energy_limit
	1012	ENDIF
	1013	WRITE ( io, 474 ) TRIM( random_generator )
	1014	ENDIF
	1015	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1016	WRITE ( io, 475 ) pt_surface_initial_change
	1017	ENDIF
	1018	IF ( moisture .AND. q_surface_initial_change /= 0.0 ) THEN
	1019	WRITE ( io, 476 ) q_surface_initial_change
	1020	ENDIF
	1021	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1022	WRITE ( io, 477 ) q_surface_initial_change
	1023	ENDIF
	1024
	1025	#if defined( __particles )
	1026	!
	1027	!-- Particle attributes
	1028	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1029	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
	1030	end_time_prel
	1031	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1032	IF ( random_start_position ) WRITE ( io, 481 )
	1033	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1034	WRITE ( io, 495 ) total_number_of_particles
	1035	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1036	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1037	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1038	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1039	WRITE ( io, 484 ) total_number_of_tails, minimum_tailpoint_distance,&
	1040	maximum_tailpoint_age
	1041	ENDIF
	1042	ENDIF
	1043	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1044	WRITE ( io, 485 ) dt_write_particle_data
	1045	output_format = ''
	1046	IF ( netcdf_output ) THEN
	1047	IF ( netcdf_64bit ) THEN
	1048	output_format = 'netcdf (64 bit offset) and binary'
	1049	ELSE
	1050	output_format = 'netcdf and binary'
	1051	ENDIF
	1052	ELSE
	1053	output_format = 'binary'
	1054	ENDIF
	1055	WRITE ( io, 345 ) output_format
	1056	ENDIF
	1057	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1058	IF ( write_particle_statistics ) WRITE ( io, 486 )
	1059
	1060	WRITE ( io, 487 ) number_of_particle_groups
	1061
	1062	DO i = 1, number_of_particle_groups
	1063	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1064	WRITE ( io, 490 ) i, 0.0
	1065	WRITE ( io, 492 )
	1066	ELSE
	1067	WRITE ( io, 490 ) i, radius(i)
	1068	IF ( density_ratio(i) /= 0.0 ) THEN
	1069	WRITE ( io, 491 ) density_ratio(i)
	1070	ELSE
	1071	WRITE ( io, 492 )
	1072	ENDIF
	1073	ENDIF
	1074	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1075	pdx(i), pdy(i), pdz(i)
	1076	ENDDO
	1077
	1078	#endif
	1079
	1080	!
	1081	!-- Parameters of 1D-model
	1082	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1083	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1084	mixing_length_1d, dissipation_1d
	1085	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1086	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1087	ENDIF
	1088	ENDIF
	1089
	1090	!
	1091	!-- User-defined informations
	1092	CALL user_header( io )
	1093
	1094	WRITE ( io, 99 )
	1095
	1096	#if defined( __ibm )
	1097	!
	1098	!-- Write buffer contents to disc immediately
	1099	CALL FLUSH_( io )
	1100	#elif defined( __lcmuk ) \|\| defined( __nec )
	1101	CALL FLUSH( io )
	1102	#endif
	1103
	1104	!
	1105	!-- Here the FORMATs start
	1106
	1107	99 FORMAT (1X,78('-'))
	1108	100 FORMAT (/10X,'****************',11X,28('-')/ &
	1109	10X,'* ',A12,'*',11X,A/ &
	1110	10X,'****************',11X,28('-')// &
	1111	' Date: ',A8,11X,'Run: ',A20/ &
	1112	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
	1113	' Run on host: ',A10)
	1114	#if defined( __parallel )
	1115	101 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
	1116	')',1X,A)
	1117	102 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
	1118	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
	1119	103 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1120	104 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
	1121	37X,'because the job is running on an SMP-cluster')
	1122	105 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
	1123	#endif
	1124	110 FORMAT (/' Numerical Schemes:'/ &
	1125	' -----------------'/)
	1126	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1127	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1128	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1129	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1130	' or Upstream')
	1131	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1132	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1133	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1134	' or Upstream')
	1135	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1136	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1137	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1138	' Translation velocity = ',A/ &
	1139	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1140	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1141	' of timestep changes)')
	1142	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1143	' timestep changes')
	1144	122 FORMAT (' --> Time differencing scheme: ',A)
	1145	123 FORMAT (' --> Rayleigh-Damping active, starts above z = ',F8.2,' m'/ &
	1146	' maximum damping coefficient: ',F5.3, ' 1/s')
	1147	124 FORMAT (' Spline-overshoots are being suppressed')
	1148	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1149	' of'/ &
	1150	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1151	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1152	' of'/ &
	1153	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1154	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1155	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1156	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1157	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1158	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1159	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1160	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1161	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1162	' effective emissivity scheme')
	1163	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1164	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1165	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1166	A,'-cycle)'/ &
	1167	' number of grid levels: ',I2/ &
	1168	' Gauss-Seidel red/black iterations: ',I2)
	1169	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1170	I3,')')
	1171	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1172	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1173	I3,')'/ &
	1174	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1175	I3,')')
	1176	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
	1177	139 FORMAT (' --> Prognostic equations are solved in one single loop (fast', &
	1178	' method)')
	1179	140 FORMAT (' maximum residual allowed: ',E10.3)
	1180	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1181	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1182	'step')
	1183	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
	1184	'conserved')
	1185	200 FORMAT (//' Run time and time step information:'/ &
	1186	' ----------------------------------'/)
	1187	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1188	' CFL-factor: ',F4.2)
	1189	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1190	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1191	' End time: ',F9.3,' s')
	1192	204 FORMAT ( A,F9.3,' s')
	1193	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1194	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1195	' CPU-time used: ',F9.3,' s per timestep: ', &
	1196	' ',F9.3,' s'/ &
	1197	' per second of simulated tim', &
	1198	'e: ',F9.3,' s')
	1199	250 FORMAT (//' Computational grid and domain size:'/ &
	1200	' ----------------------------------'// &
	1201	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1202	' m dz = ',F7.3,' m'/ &
	1203	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1204	' m z(u) = ',F10.3,' m'/)
	1205	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1206	' factor: ',F5.3/ &
	1207	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1208	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1209	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1210	255 FORMAT (' Subdomains have equal size')
	1211	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1212	'have smaller sizes'/ &
	1213	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1214	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1215	' degrees')
	1216	270 FORMAT (//' Topography informations:'/ &
	1217	' -----------------------'// &
	1218	1X,'Topography: ',A)
	1219	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1220	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1221	' / ',I4)
	1222	300 FORMAT (//' Boundary conditions:'/ &
	1223	' -------------------'// &
	1224	' p uv ', &
	1225	' pt'// &
	1226	' B. bound.: ',A/ &
	1227	' T. bound.: ',A)
	1228	301 FORMAT (/' e'// &
	1229	' B. bound.: ',A/ &
	1230	' T. bound.: ',A)
	1231	302 FORMAT (/' q'// &
	1232	' B. bound.: ',A/ &
	1233	' T. bound.: ',A)
[19]	1234	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1235	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1236	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1237	'computational u,v-level:'// &
[1]	1238	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1239	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1240	306 FORMAT (' Predefined constant heatflux: ',F6.3,' K m/s')
	1241	307 FORMAT (' Heatflux has a random normal distribution')
	1242	308 FORMAT (' Predefined surface temperature')
	1243	310 FORMAT (//' 1D-Model:'// &
	1244	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1245	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1246	312 FORMAT (' Predefined surface humidity')
	1247	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1248	314 FORMAT (' Predefined scalar value at the surface')
[19]	1249	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[1]	1250	317 FORMAT (//' Lateral boundaries:'/ &
	1251	' left/right: ',A/ &
	1252	' north/south: ',A)
	1253	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1254	'max =',F5.1,' m**2/s')
	1255	320 FORMAT (//' List output:'/ &
	1256	' -----------'// &
	1257	' 1D-Profiles:'/ &
	1258	' Output every ',F8.2,' s')
	1259	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
	1260	' Averaging input every ',F8.2,' s')
	1261	330 FORMAT (//' Data output:'/ &
	1262	' -----------'/)
	1263	331 FORMAT (/' 1D-Profiles:')
	1264	332 FORMAT (/' ',A)
	1265	333 FORMAT (' Output every ',F8.2,' s',/ &
	1266	' Time averaged over ',F8.2,' s'/ &
	1267	' Averaging input every ',F8.2,' s')
	1268	334 FORMAT (/' 2D-Arrays',A,':')
	1269	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1270	' Output every ',F8.2,' s ',A/ &
	1271	' Cross sections at ',A1,' = ',A/ &
	1272	' scalar-coordinates: ',A,' m'/)
	1273	336 FORMAT (/' 3D-Arrays',A,':')
	1274	337 FORMAT (/' Arrays: ',A/ &
	1275	' Output every ',F8.2,' s ',A/ &
	1276	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1277	338 FORMAT (' Compressed data output'/ &
	1278	' Decimal precision: ',A/)
	1279	339 FORMAT (' No output during initial ',F8.2,' s')
	1280	340 FORMAT (/' Time series:')
	1281	341 FORMAT (' Output every ',F8.2,' s'/)
	1282	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1283	' Output every ',F8.2,' s ',A/ &
	1284	' Time averaged over ',F8.2,' s'/ &
	1285	' Averaging input every ',F8.2,' s'/ &
	1286	' Cross sections at ',A1,' = ',A/ &
	1287	' scalar-coordinates: ',A,' m'/)
	1288	343 FORMAT (/' Arrays: ',A/ &
	1289	' Output every ',F8.2,' s ',A/ &
	1290	' Time averaged over ',F8.2,' s'/ &
	1291	' Averaging input every ',F8.2,' s'/ &
	1292	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1293	345 FORMAT (' Output format: ',A/)
	1294	#if defined( __dvrp_graphics )
	1295	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1296	' Output every ',F7.1,' s'/ &
	1297	' Output mode: ',A/ &
	1298	' Host / User: ',A,' / ',A/ &
	1299	' Directory: ',A// &
	1300	' The sequence contains:')
	1301	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1302	362 FORMAT (' Sectional plane ',A)
	1303	363 FORMAT (' Particles')
	1304	#endif
	1305	#if defined( __spectra )
	1306	370 FORMAT (' Spectra:')
	1307	371 FORMAT (' Output every ',F7.1,' s'/)
	1308	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1309	' Directions: ', 10(A5,',')/ &
	1310	' height levels k = ', 9(I3,','),I3,'.'/ &
	1311	' height levels selected for standard plot:'/ &
	1312	' k = ', 9(I3,','),I3,'.'/ &
	1313	' Time averaged over ', F7.1, ' s,' / &
	1314	' Profiles for the time averaging are taken every ', &
	1315	F6.1,' s')
	1316	#endif
	1317	400 FORMAT (//' Physical quantities:'/ &
	1318	' -------------------'/)
	1319	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1320	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1321	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1322	' f* = ',F9.6,' 1/s')
	1323	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
	1324	412 FORMAT (/' Cloud physics parameters:'/ &
	1325	' ------------------------'/)
	1326	413 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
	1327	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1328	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1329	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1330	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1331	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1332	' Height: ',A,' m'/ &
	1333	' Temperature: ',A,' K'/ &
	1334	' Gradient: ',A,' K/100m'/ &
	1335	' Gridpoint: ',A)
	1336	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1337	' Height: ',A,' m'/ &
	1338	' Humidity: ',A,' kg/kg'/ &
	1339	' Gradient: ',A,' (kg/kg)/100m'/ &
	1340	' Gridpoint: ',A)
	1341	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1342	' Height: ',A,' m'/ &
	1343	' Scalar concentration: ',A,' kg/m**3'/ &
	1344	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1345	' Gridpoint: ',A)
	1346	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1347	' Height: ',A,' m'/ &
	1348	' ug: ',A,' m/s'/ &
	1349	' Gradient: ',A,' 1/100s'/ &
	1350	' Gridpoint: ',A)
	1351	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1352	' Height: ',A,' m'/ &
	1353	' vg: ',A,' m/S'/ &
	1354	' Gradient: ',A,' 1/100s'/ &
	1355	' Gridpoint: ',A)
	1356	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1357	' ---------------------------'/)
	1358	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1359	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1360	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1361	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1362	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1363	470 FORMAT (//' Actions during the simulation:'/ &
	1364	' -----------------------------'/)
	1365	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1366	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1367	' Lower disturbance level : ',F7.2,' m (GP ',I4,')'/ &
	1368	' Upper disturbance level : ',F7.2,' m (GP ',I4,')')
	1369	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1370	' to i/j =',I4)
	1371	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1372	1X,F5.3, ' m2/s2')
	1373	474 FORMAT (' Random number generator used : ',A/)
	1374	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1375	'respectively, if'/ &
	1376	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1377	' 3D-simulation'/)
	1378	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1379	'respectively, if the'/ &
	1380	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1381	' the 3D-simulation'/)
	1382	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1383	'respectively, if the'/ &
	1384	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1385	' the 3D-simulation'/)
	1386	#if defined( __particles )
	1387	480 FORMAT (' Particles:'/ &
	1388	' ---------'// &
	1389	' Particle advection is active (switched on at t = ', F7.1, &
	1390	' s)'/ &
	1391	' Start of new particle generations every ',F6.1,' s'/ &
	1392	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1393	' bottom: ', A, ' top: ', A/&
	1394	' Maximum particle age: ',F9.1,' s'/ &
	1395	' Advection stopped at t = ',F9.1,' s'/)
	1396	481 FORMAT (' Particles have random start positions'/)
	1397	482 FORMAT (' Particles are advected only horizontally'/)
	1398	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1399	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1400	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1401	' Maximum age of the end of the tail: ',F8.2,' s')
	1402	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1403	486 FORMAT (' Particle statistics are written on file'/)
	1404	487 FORMAT (' Number of particle groups: ',I2/)
	1405	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1406	' minimum timestep for advection: ', F7.5/)
	1407	489 FORMAT (' Number of particles simultaneously released at each ', &
	1408	'point: ', I5/)
	1409	490 FORMAT (' Particle group ',I2,':'/ &
	1410	' Particle radius: ',E10.3, 'm')
	1411	491 FORMAT (' Particle inertia is activated'/ &
	1412	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1413	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1414	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1415	' y:',F8.1,' - ',F8.1,' m'/&
	1416	' z:',F8.1,' - ',F8.1,' m'/&
	1417	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1418	' m dz = ',F8.1,' m'/)
	1419	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1420	F8.2,' s'/)
	1421	495 FORMAT (' Number of particles in total domain: ',I10/)
	1422	#endif
	1423	500 FORMAT (//' 1D-Model parameters:'/ &
	1424	' -------------------'// &
	1425	' Simulation time: ',F8.1,' s'/ &
	1426	' Run-controll output every: ',F8.1,' s'/ &
	1427	' Vertical profile output every: ',F8.1,' s'/ &
	1428	' Mixing length calculation: ',A/ &
	1429	' Dissipation calculation: ',A/)
	1430	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1431
	1432
	1433	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |