Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 16

Last change on this file since 16 was 4, checked in by raasch, 18 years ago
Id keyword set as property for all *.f90 files
Property svn:keywords set to `Id`
File size: 53.8 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
	6	!
	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: header.f90 4 2007-02-13 11:33:16Z raasch $
	11	! RCS Log replace by Id keyword, revision history cleaned up
	12	!
[1]	13	! Revision 1.63 2006/08/22 13:53:13 raasch
	14	! Output of dz_max
	15	!
	16	! Revision 1.1 1997/08/11 06:17:20 raasch
	17	! Initial revision
	18	!
	19	!
	20	! Description:
	21	! ------------
	22	! Writing a header with all important informations about the actual run.
	23	! This subroutine is called three times, two times at the beginning
	24	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	25	! end of the run, then writing additional information about CPU-usage on file
	26	! header.
	27	!------------------------------------------------------------------------------!
	28
	29	USE arrays_3d
	30	USE control_parameters
	31	USE cloud_parameters
	32	USE cpulog
	33	USE dvrp_variables
	34	USE grid_variables
	35	USE indices
	36	USE model_1d
	37	USE particle_attributes
	38	USE pegrid
	39	USE spectrum
	40
	41	IMPLICIT NONE
	42
	43	CHARACTER (LEN=1) :: prec
	44	CHARACTER (LEN=2) :: do2d_mode
	45	CHARACTER (LEN=5) :: section_chr
	46	CHARACTER (LEN=9) :: time_to_string
	47	CHARACTER (LEN=10) :: coor_chr, host_chr
	48	CHARACTER (LEN=16) :: begin_chr
	49	CHARACTER (LEN=40) :: output_format
	50	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
	51	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
	52	run_classification, slices, temperatures, &
	53	ugcomponent, vgcomponent
	54	CHARACTER (LEN=85) :: roben, runten
	55
	56	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
	57	REAL :: cpuseconds_per_simulated_second
	58
	59	!
	60	!-- Open the output file. At the end of the simulation, output is directed
	61	!-- to unit 19.
	62	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	63	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	64	io = 15 ! header output on file RUN_CONTROL
	65	ELSE
	66	io = 19 ! header output on file HEADER
	67	ENDIF
	68	CALL check_open( io )
	69
	70	!
	71	!-- At the end of the run, output file (HEADER) will be rewritten with
	72	!-- new informations
	73	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	74
	75	!
	76	!-- Determine kind of model run
	77	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	78	run_classification = '3D - restart run'
	79	ELSE
	80	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	81	run_classification = '3D - run without 1D - prerun'
	82	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	83	run_classification = '3D - run with 1D - prerun'
	84	ELSE
	85	PRINT*,'+++ header: unknown action(s): ',initializing_actions
	86	ENDIF
	87	ENDIF
	88
	89	!
	90	!-- Run-identification, date, time, host
	91	host_chr = host(1:10)
	92	WRITE ( io, 100 ) version, TRIM( run_classification ), run_date, &
	93	run_identifier, run_time, runnr, ADJUSTR( host_chr )
	94	#if defined( __parallel )
	95	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	96	char1 = 'calculated'
	97	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	98	host(1:2) == 'lc' ) .AND. &
	99	npex == -1 .AND. pdims(2) == 1 ) THEN
	100	char1 = 'forced'
	101	ELSE
	102	char1 = 'predefined'
	103	ENDIF
	104	IF ( threads_per_task == 1 ) THEN
	105	WRITE ( io, 101 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
	106	ELSE
	107	WRITE ( io, 102 ) numprocs*threads_per_task, numprocs, &
	108	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	109	ENDIF
	110	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	111	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	112	npex == -1 .AND. pdims(2) == 1 ) &
	113	THEN
	114	WRITE ( io, 104 )
	115	ELSEIF ( pdims(2) == 1 ) THEN
	116	WRITE ( io, 105 ) 'x'
	117	ELSEIF ( pdims(1) == 1 ) THEN
	118	WRITE ( io, 105 ) 'y'
	119	ENDIF
	120	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 103 )
	121	#endif
	122	WRITE ( io, 99 )
	123
	124	!
	125	!-- Numerical schemes
	126	WRITE ( io, 110 )
	127	IF ( psolver(1:7) == 'poisfft' ) THEN
	128	WRITE ( io, 111 ) TRIM( fft_method )
	129	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	130	ELSEIF ( psolver == 'sor' ) THEN
	131	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	132	ELSEIF ( psolver == 'multigrid' ) THEN
	133	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	134	IF ( mg_cycles == -1 ) THEN
	135	WRITE ( io, 140 ) residual_limit
	136	ELSE
	137	WRITE ( io, 141 ) mg_cycles
	138	ENDIF
	139	IF ( mg_switch_to_pe0_level == 0 ) THEN
	140	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	141	nzt_mg(1)
	142	ELSE
	143	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	144	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	145	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	146	nzt_mg(mg_switch_to_pe0_level), &
	147	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	148	nzt_mg(1)
	149	ENDIF
	150	ENDIF
	151	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	152	THEN
	153	WRITE ( io, 142 )
	154	ENDIF
	155
	156	IF ( momentum_advec == 'pw-scheme' ) THEN
	157	WRITE ( io, 113 )
	158	ELSE
	159	WRITE ( io, 114 )
	160	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	161	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	162	overshoot_limit_w /= 0.0 ) THEN
	163	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	164	overshoot_limit_w
	165	ENDIF
	166	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	167	ups_limit_w /= 0.0 ) &
	168	THEN
	169	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	170	ENDIF
	171	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	172	ENDIF
	173	IF ( scalar_advec == 'pw-scheme' ) THEN
	174	WRITE ( io, 116 )
	175	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	176	WRITE ( io, 117 )
	177	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	178	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	179	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	180	ENDIF
	181	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	182	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	183	ENDIF
	184	ELSE
	185	WRITE ( io, 118 )
	186	ENDIF
	187	IF ( momentum_advec /= 'ups-scheme' .AND. scalar_advec /= 'ups-scheme' &
	188	.AND. scalar_advec /= 'bc-scheme' .AND. host(1:3) /= 'nec' ) THEN
	189	WRITE ( io, 139 )
	190	ENDIF
	191	IF ( galilei_transformation ) THEN
	192	IF ( use_ug_for_galilei_tr ) THEN
	193	char1 = 'geostrophic wind'
	194	ELSE
	195	char1 = 'mean wind in model domain'
	196	ENDIF
	197	IF ( simulated_time_at_begin == simulated_time ) THEN
	198	char2 = 'at the start of the run'
	199	ELSE
	200	char2 = 'at the end of the run'
	201	ENDIF
	202	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	203	advected_distance_x/1000.0, advected_distance_y/1000.0
	204	ENDIF
	205	IF ( timestep_scheme == 'leapfrog' ) THEN
	206	WRITE ( io, 120 )
	207	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	208	WRITE ( io, 121 )
	209	ELSE
	210	WRITE ( io, 122 ) timestep_scheme
	211	ENDIF
	212	IF ( rayleigh_damping_factor /= 0.0 ) THEN
	213	WRITE ( io, 123 ) rayleigh_damping_height, rayleigh_damping_factor
	214	ENDIF
	215	IF ( moisture ) THEN
	216	IF ( .NOT. cloud_physics ) THEN
	217	WRITE ( io, 129 )
	218	ELSE
	219	WRITE ( io, 130 )
	220	WRITE ( io, 131 )
	221	IF ( radiation ) WRITE ( io, 132 )
	222	IF ( precipitation ) WRITE ( io, 133 )
	223	ENDIF
	224	ENDIF
	225	IF ( passive_scalar ) WRITE ( io, 134 )
	226	IF ( conserve_volume_flow ) WRITE ( io, 150 )
	227	WRITE ( io, 99 )
	228
	229	!
	230	!-- Runtime and timestep informations
	231	WRITE ( io, 200 )
	232	IF ( .NOT. dt_fixed ) THEN
	233	WRITE ( io, 201 ) dt_max, cfl_factor
	234	ELSE
	235	WRITE ( io, 202 ) dt
	236	ENDIF
	237	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	238
	239	IF ( time_restart /= 9999999.9 .AND. &
	240	simulated_time_at_begin == simulated_time ) THEN
	241	IF ( dt_restart == 9999999.9 ) THEN
	242	WRITE ( io, 204 ) ' Restart at: ',time_restart
	243	ELSE
	244	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	245	ENDIF
	246	ENDIF
	247
	248	IF ( simulated_time_at_begin /= simulated_time ) THEN
	249	i = MAX ( log_point_s(10)%counts, 1 )
	250	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	251	cpuseconds_per_simulated_second = 0.0
	252	ELSE
	253	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	254	( simulated_time - &
	255	simulated_time_at_begin )
	256	ENDIF
	257	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	258	log_point_s(10)%sum / REAL( i ), &
	259	cpuseconds_per_simulated_second
	260	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	261	IF ( dt_restart == 9999999.9 ) THEN
	262	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	263	ELSE
	264	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	265	ENDIF
	266	ENDIF
	267	ENDIF
	268
	269	!
	270	!-- Computational grid
	271	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	272	IF ( dz_stretch_level_index < nzt+1 ) THEN
	273	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	274	dz_stretch_factor, dz_max
	275	ENDIF
	276	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	277	MIN( nnz+2, nzt+2 )
	278	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	279	WRITE ( io, 255 )
	280	ELSE
	281	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	282	ENDIF
	283	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	284
	285	!
	286	!-- Topography
	287	WRITE ( io, 270 ) topography
	288	SELECT CASE ( TRIM( topography ) )
	289
	290	CASE ( 'flat' )
	291	! no actions necessary
	292
	293	CASE ( 'single_building' )
	294	blx = INT( building_length_x / dx )
	295	bly = INT( building_length_y / dy )
	296	bh = INT( building_height / dz )
	297
	298	IF ( building_wall_left == 9999999.9 ) THEN
	299	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	300	ENDIF
	301	bxl = INT ( building_wall_left / dx + 0.5 )
	302	bxr = bxl + blx
	303
	304	IF ( building_wall_south == 9999999.9 ) THEN
	305	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	306	ENDIF
	307	bys = INT ( building_wall_south / dy + 0.5 )
	308	byn = bys + bly
	309
	310	WRITE ( io, 271 ) building_length_x, building_length_y, &
	311	building_height, bxl, bxr, bys, byn
	312
	313	END SELECT
	314
	315	!
	316	!-- Boundary conditions
	317	IF ( ibc_p_b == 0 ) THEN
	318	runten = 'p(0) = 0 \|'
	319	ELSEIF ( ibc_p_b == 1 ) THEN
	320	runten = 'p(0) = p(1) \|'
	321	ELSE
	322	runten = 'p(0) = p(1) +R\|'
	323	ENDIF
	324	IF ( ibc_p_t == 0 ) THEN
	325	roben = 'p(nzt+1) = 0 \|'
	326	ELSE
	327	roben = 'p(nzt+1) = p(nzt) \|'
	328	ENDIF
	329
	330	IF ( ibc_uv_b == 0 ) THEN
	331	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	332	ELSE
	333	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	334	ENDIF
	335	IF ( ibc_uv_t == 0 ) THEN
	336	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	337	ELSE
	338	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	339	ENDIF
	340
	341	IF ( ibc_pt_b == 0 ) THEN
	342	runten = TRIM( runten ) // ' pt(0) = pt_surface'
	343	ELSE
	344	runten = TRIM( runten ) // ' pt(0) = pt(1)'
	345	ENDIF
	346	IF ( ibc_pt_t == 0 ) THEN
	347	roben = TRIM( roben ) // ' pt(nzt) = pt_top'
	348	ELSE
	349	roben = TRIM( roben ) // ' pt(nzt) = pt(nzt-1) + dpt/dz'
	350	ENDIF
	351
	352	WRITE ( io, 300 ) runten, roben
	353
	354	IF ( .NOT. constant_diffusion ) THEN
	355	IF ( ibc_e_b == 1 ) THEN
	356	runten = 'e(0) = e(1)'
	357	ELSE
	358	runten = 'e(0) = e(1) = (u/0.1)*2'
	359	ENDIF
	360	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	361
	362	WRITE ( io, 301 ) runten, roben
	363
	364	ENDIF
	365
	366	IF ( moisture .OR. passive_scalar ) THEN
	367	IF ( moisture ) THEN
	368	IF ( ibc_q_b == 0 ) THEN
	369	runten = 'q(0) = q_surface'
	370	ELSE
	371	runten = 'q(0) = q(1)'
	372	ENDIF
	373	IF ( ibc_q_t == 0 ) THEN
	374	roben = 'q(nzt) = q_top'
	375	ELSE
	376	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	377	ENDIF
	378	ELSE
	379	IF ( ibc_q_b == 0 ) THEN
	380	runten = 's(0) = s_surface'
	381	ELSE
	382	runten = 's(0) = s(1)'
	383	ENDIF
	384	IF ( ibc_q_t == 0 ) THEN
	385	roben = 's(nzt) = s_top'
	386	ELSE
	387	roben = 's(nzt) = s(nzt-1) + ds/dz'
	388	ENDIF
	389	ENDIF
	390
	391	WRITE ( io, 302 ) runten, roben
	392
	393	ENDIF
	394
	395	IF ( use_surface_fluxes ) THEN
	396	WRITE ( io, 303 )
	397	IF ( constant_heatflux ) THEN
	398	WRITE ( io, 306 ) surface_heatflux
	399	IF ( random_heatflux ) WRITE ( io, 307 )
	400	ENDIF
	401	IF ( moisture .AND. constant_waterflux ) THEN
	402	WRITE ( io, 311 ) surface_waterflux
	403	ENDIF
	404	IF ( passive_scalar .AND. constant_waterflux ) THEN
	405	WRITE ( io, 313 ) surface_waterflux
	406	ENDIF
	407	ENDIF
	408
	409	IF ( prandtl_layer ) THEN
	410	WRITE ( io, 305 ) zu(1), roughness_length, kappa, rif_min, rif_max
	411	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
	412	IF ( moisture .AND. .NOT. constant_waterflux ) THEN
	413	WRITE ( io, 312 )
	414	ENDIF
	415	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	416	WRITE ( io, 314 )
	417	ENDIF
	418	ELSE
	419	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	420	WRITE ( io, 310 ) rif_min, rif_max
	421	ENDIF
	422	ENDIF
	423
	424	WRITE ( io, 317 ) bc_lr, bc_ns
	425	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	426	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
	427	ENDIF
	428
	429	!
	430	!-- Listing of 1D-profiles
	431	WRITE ( io, 320 ) dt_dopr_listing
	432	IF ( averaging_interval_pr /= 0.0 ) THEN
	433	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	434	ENDIF
	435
	436	!
	437	!-- DATA output
	438	WRITE ( io, 330 )
	439	IF ( averaging_interval_pr /= 0.0 ) THEN
	440	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
	441	ENDIF
	442
	443	!
	444	!-- 1D-profiles
	445	dopr_chr = 'Profile:'
	446	IF ( dopr_n /= 0 ) THEN
	447	WRITE ( io, 331 )
	448
	449	output_format = ''
	450	IF ( netcdf_output ) THEN
	451	IF ( netcdf_64bit ) THEN
	452	output_format = 'netcdf (64 bit offset)'
	453	ELSE
	454	output_format = 'netcdf'
	455	ENDIF
	456	ENDIF
	457	IF ( profil_output ) THEN
	458	IF ( netcdf_output ) THEN
	459	output_format = TRIM( output_format ) // ' and profil'
	460	ELSE
	461	output_format = 'profil'
	462	ENDIF
	463	ENDIF
	464	WRITE ( io, 345 ) output_format
	465
	466	DO i = 1, dopr_n
	467	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	468	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	469	WRITE ( io, 332 ) dopr_chr
	470	dopr_chr = ' :'
	471	ENDIF
	472	ENDDO
	473
	474	IF ( dopr_chr /= '' ) THEN
	475	WRITE ( io, 332 ) dopr_chr
	476	ENDIF
	477	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	478	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	479	ENDIF
	480
	481	!
	482	!-- 2D-arrays
	483	DO av = 0, 1
	484
	485	i = 1
	486	do2d_xy = ''
	487	do2d_xz = ''
	488	do2d_yz = ''
	489	DO WHILE ( do2d(av,i) /= ' ' )
	490
	491	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	492	do2d_mode = do2d(av,i)(l-1:l)
	493
	494	SELECT CASE ( do2d_mode )
	495	CASE ( 'xy' )
	496	ll = LEN_TRIM( do2d_xy )
	497	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	498	CASE ( 'xz' )
	499	ll = LEN_TRIM( do2d_xz )
	500	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	501	CASE ( 'yz' )
	502	ll = LEN_TRIM( do2d_yz )
	503	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	504	END SELECT
	505
	506	i = i + 1
	507
	508	ENDDO
	509
	510	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	511	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	512	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	513	( netcdf_output .OR. iso2d_output ) ) THEN
	514
	515	IF ( av == 0 ) THEN
	516	WRITE ( io, 334 ) ''
	517	ELSE
	518	WRITE ( io, 334 ) '(time-averaged)'
	519	ENDIF
	520
	521	IF ( do2d_at_begin ) THEN
	522	begin_chr = 'and at the start'
	523	ELSE
	524	begin_chr = ''
	525	ENDIF
	526
	527	output_format = ''
	528	IF ( netcdf_output ) THEN
	529	IF ( netcdf_64bit ) THEN
	530	output_format = 'netcdf (64 bit offset)'
	531	ELSE
	532	output_format = 'netcdf'
	533	ENDIF
	534	ENDIF
	535	IF ( iso2d_output ) THEN
	536	IF ( netcdf_output ) THEN
	537	output_format = TRIM( output_format ) // ' and iso2d'
	538	ELSE
	539	output_format = 'iso2d'
	540	ENDIF
	541	ENDIF
	542	WRITE ( io, 345 ) output_format
	543
	544	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	545	i = 1
	546	slices = '/'
	547	coordinates = '/'
	548	!
	549	!-- Building strings with index and coordinate informations of the
	550	!-- slices
	551	DO WHILE ( section(i,1) /= -9999 )
	552
	553	WRITE (section_chr,'(I5)') section(i,1)
	554	section_chr = ADJUSTL( section_chr )
	555	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	556
	557	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	558	coor_chr = ADJUSTL( coor_chr )
	559	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	560
	561	i = i + 1
	562	ENDDO
	563	IF ( av == 0 ) THEN
	564	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	565	TRIM( begin_chr ), 'k', TRIM( slices ), &
	566	TRIM( coordinates )
	567	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	568	WRITE ( io, 339 ) skip_time_do2d_xy
	569	ENDIF
	570	ELSE
	571	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	572	TRIM( begin_chr ), averaging_interval, &
	573	dt_averaging_input, 'k', TRIM( slices ), &
	574	TRIM( coordinates )
	575	IF ( skip_time_data_output_av /= 0.0 ) THEN
	576	WRITE ( io, 339 ) skip_time_data_output_av
	577	ENDIF
	578	ENDIF
	579
	580	ENDIF
	581
	582	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	583	i = 1
	584	slices = '/'
	585	coordinates = '/'
	586	!
	587	!-- Building strings with index and coordinate informations of the
	588	!-- slices
	589	DO WHILE ( section(i,2) /= -9999 )
	590
	591	WRITE (section_chr,'(I5)') section(i,2)
	592	section_chr = ADJUSTL( section_chr )
	593	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	594
	595	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	596	coor_chr = ADJUSTL( coor_chr )
	597	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	598
	599	i = i + 1
	600	ENDDO
	601	IF ( av == 0 ) THEN
	602	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	603	TRIM( begin_chr ), 'j', TRIM( slices ), &
	604	TRIM( coordinates )
	605	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	606	WRITE ( io, 339 ) skip_time_do2d_xz
	607	ENDIF
	608	ELSE
	609	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	610	TRIM( begin_chr ), averaging_interval, &
	611	dt_averaging_input, 'j', TRIM( slices ), &
	612	TRIM( coordinates )
	613	IF ( skip_time_data_output_av /= 0.0 ) THEN
	614	WRITE ( io, 339 ) skip_time_data_output_av
	615	ENDIF
	616	ENDIF
	617	ENDIF
	618
	619	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	620	i = 1
	621	slices = '/'
	622	coordinates = '/'
	623	!
	624	!-- Building strings with index and coordinate informations of the
	625	!-- slices
	626	DO WHILE ( section(i,3) /= -9999 )
	627
	628	WRITE (section_chr,'(I5)') section(i,3)
	629	section_chr = ADJUSTL( section_chr )
	630	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	631
	632	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	633	coor_chr = ADJUSTL( coor_chr )
	634	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	635
	636	i = i + 1
	637	ENDDO
	638	IF ( av == 0 ) THEN
	639	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	640	TRIM( begin_chr ), 'i', TRIM( slices ), &
	641	TRIM( coordinates )
	642	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	643	WRITE ( io, 339 ) skip_time_do2d_yz
	644	ENDIF
	645	ELSE
	646	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	647	TRIM( begin_chr ), averaging_interval, &
	648	dt_averaging_input, 'i', TRIM( slices ), &
	649	TRIM( coordinates )
	650	IF ( skip_time_data_output_av /= 0.0 ) THEN
	651	WRITE ( io, 339 ) skip_time_data_output_av
	652	ENDIF
	653	ENDIF
	654	ENDIF
	655
	656	ENDIF
	657
	658	ENDDO
	659
	660	!
	661	!-- 3d-arrays
	662	DO av = 0, 1
	663
	664	i = 1
	665	do3d_chr = ''
	666	DO WHILE ( do3d(av,i) /= ' ' )
	667
	668	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	669	i = i + 1
	670
	671	ENDDO
	672
	673	IF ( do3d_chr /= '' ) THEN
	674	IF ( av == 0 ) THEN
	675	WRITE ( io, 336 ) ''
	676	ELSE
	677	WRITE ( io, 336 ) '(time-averaged)'
	678	ENDIF
	679
	680	output_format = ''
	681	IF ( netcdf_output ) THEN
	682	IF ( netcdf_64bit ) THEN
	683	output_format = 'netcdf (64 bit offset)'
	684	ELSE
	685	output_format = 'netcdf'
	686	ENDIF
	687	ENDIF
	688	IF ( avs_output ) THEN
	689	IF ( netcdf_output ) THEN
	690	output_format = TRIM( output_format ) // ' and avs'
	691	ELSE
	692	output_format = 'avs'
	693	ENDIF
	694	ENDIF
	695	WRITE ( io, 345 ) output_format
	696
	697	IF ( do3d_at_begin ) THEN
	698	begin_chr = 'and at the start'
	699	ELSE
	700	begin_chr = ''
	701	ENDIF
	702	IF ( av == 0 ) THEN
	703	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	704	zu(nz_do3d), nz_do3d
	705	ELSE
	706	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	707	TRIM( begin_chr ), averaging_interval, &
	708	dt_averaging_input, zu(nz_do3d), nz_do3d
	709	ENDIF
	710
	711	IF ( do3d_compress ) THEN
	712	do3d_chr = ''
	713	i = 1
	714	DO WHILE ( do3d(av,i) /= ' ' )
	715
	716	SELECT CASE ( do3d(av,i) )
	717	CASE ( 'u' )
	718	j = 1
	719	CASE ( 'v' )
	720	j = 2
	721	CASE ( 'w' )
	722	j = 3
	723	CASE ( 'p' )
	724	j = 4
	725	CASE ( 'pt' )
	726	j = 5
	727	END SELECT
	728	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	729	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	730	':' // prec // ','
	731	i = i + 1
	732
	733	ENDDO
	734	WRITE ( io, 338 ) do3d_chr
	735
	736	ENDIF
	737
	738	IF ( av == 0 ) THEN
	739	IF ( skip_time_do3d /= 0.0 ) THEN
	740	WRITE ( io, 339 ) skip_time_do3d
	741	ENDIF
	742	ELSE
	743	IF ( skip_time_data_output_av /= 0.0 ) THEN
	744	WRITE ( io, 339 ) skip_time_data_output_av
	745	ENDIF
	746	ENDIF
	747
	748	ENDIF
	749
	750	ENDDO
	751
	752	!
	753	!-- Timeseries
	754	IF ( dt_dots /= 9999999.9 ) THEN
	755	WRITE ( io, 340 )
	756
	757	output_format = ''
	758	IF ( netcdf_output ) THEN
	759	IF ( netcdf_64bit ) THEN
	760	output_format = 'netcdf (64 bit offset)'
	761	ELSE
	762	output_format = 'netcdf'
	763	ENDIF
	764	ENDIF
	765	IF ( profil_output ) THEN
	766	IF ( netcdf_output ) THEN
	767	output_format = TRIM( output_format ) // ' and profil'
	768	ELSE
	769	output_format = 'profil'
	770	ENDIF
	771	ENDIF
	772	WRITE ( io, 345 ) output_format
	773	WRITE ( io, 341 ) dt_dots
	774	ENDIF
	775
	776	#if defined( __dvrp_graphics )
	777	!
	778	!-- Dvrp-output
	779	IF ( dt_dvrp /= 9999999.9 ) THEN
	780	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	781	TRIM( dvrp_username ), TRIM( dvrp_directory )
	782	i = 1
	783	l = 0
	784	DO WHILE ( mode_dvrp(i) /= ' ' )
	785	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
	786	READ ( mode_dvrp(i), '(10X,I1)' ) j
	787	l = l + 1
	788	IF ( do3d(0,j) /= ' ' ) THEN
	789	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
	790	ENDIF
	791	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
	792	READ ( mode_dvrp(i), '(6X,I1)' ) j
	793	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
	794	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
	795	WRITE ( io, 363 )
	796	ENDIF
	797	i = i + 1
	798	ENDDO
	799	ENDIF
	800	#endif
	801
	802	#if defined( __spectra )
	803	!
	804	!-- Spectra output
	805	IF ( dt_dosp /= 9999999.9 ) THEN
	806	WRITE ( io, 370 )
	807
	808	output_format = ''
	809	IF ( netcdf_output ) THEN
	810	IF ( netcdf_64bit ) THEN
	811	output_format = 'netcdf (64 bit offset)'
	812	ELSE
	813	output_format = 'netcdf'
	814	ENDIF
	815	ENDIF
	816	IF ( profil_output ) THEN
	817	IF ( netcdf_output ) THEN
	818	output_format = TRIM( output_format ) // ' and profil'
	819	ELSE
	820	output_format = 'profil'
	821	ENDIF
	822	ENDIF
	823	WRITE ( io, 345 ) output_format
	824	WRITE ( io, 371 ) dt_dosp
	825	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	826	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	827	( spectra_direction(i), i = 1,10 ), &
	828	( comp_spectra_level(i), i = 1,10 ), &
	829	( plot_spectra_level(i), i = 1,10 ), &
	830	averaging_interval_sp, dt_averaging_input_pr
	831	ENDIF
	832	#endif
	833
	834	WRITE ( io, 99 )
	835
	836	!
	837	!-- Physical quantities
	838	WRITE ( io, 400 )
	839
	840	!
	841	!-- Geostrophic parameters
	842	WRITE ( io, 410 ) omega, phi, f, fs
	843
	844	!
	845	!-- Other quantities
	846	WRITE ( io, 411 ) g
	847
	848	!
	849	!-- Cloud physics parameters
	850	IF ( cloud_physics ) THEN
	851	WRITE ( io, 412 )
	852	WRITE ( io, 413 ) surface_pressure, r_d, rho_surface, cp, l_v
	853	ENDIF
	854
	855	!-- Profile of the geostrophic wind (component ug)
	856	!-- Building output strings
	857	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	858	gradients = '------'
	859	slices = ' 0'
	860	coordinates = ' 0.0'
	861	i = 1
	862	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	863
	864	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
	865	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	866
	867	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
	868	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	869
	870	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
	871	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	872
	873	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
	874	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	875
	876	i = i + 1
	877	ENDDO
	878
	879	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	880	TRIM( gradients ), TRIM( slices )
	881
	882	!-- Profile of the geostrophic wind (component vg)
	883	!-- Building output strings
	884	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	885	gradients = '------'
	886	slices = ' 0'
	887	coordinates = ' 0.0'
	888	i = 1
	889	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	890
	891	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
	892	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	893
	894	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
	895	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	896
	897	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
	898	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	899
	900	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
	901	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	902
	903	i = i + 1
	904	ENDDO
	905
	906	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	907	TRIM( gradients ), TRIM( slices )
	908
	909	!
	910	!-- Initial temperature profile
	911	!-- Building output strings, starting with surface temperature
	912	WRITE ( temperatures, '(F6.2)' ) pt_surface
	913	gradients = '------'
	914	slices = ' 0'
	915	coordinates = ' 0.0'
	916	i = 1
	917	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	918
	919	WRITE (coor_chr,'(F6.2,4X)') pt_init(pt_vertical_gradient_level_ind(i))
	920	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	921
	922	WRITE (coor_chr,'(F6.2,4X)') pt_vertical_gradient(i)
	923	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	924
	925	WRITE (coor_chr,'(I6,4X)') pt_vertical_gradient_level_ind(i)
	926	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	927
	928	WRITE (coor_chr,'(F6.1,4X)') pt_vertical_gradient_level(i)
	929	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	930
	931	i = i + 1
	932	ENDDO
	933
	934	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	935	TRIM( gradients ), TRIM( slices )
	936
	937	!
	938	!-- Initial humidity profile
	939	!-- Building output strings, starting with surface humidity
	940	IF ( moisture .OR. passive_scalar ) THEN
	941	WRITE ( temperatures, '(E8.1)' ) q_surface
	942	gradients = '--------'
	943	slices = ' 0'
	944	coordinates = ' 0.0'
	945	i = 1
	946	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	947
	948	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	949	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	950
	951	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	952	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	953
	954	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	955	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	956
	957	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	958	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	959
	960	i = i + 1
	961	ENDDO
	962
	963	IF ( moisture ) THEN
	964	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	965	TRIM( gradients ), TRIM( slices )
	966	ELSE
	967	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	968	TRIM( gradients ), TRIM( slices )
	969	ENDIF
	970	ENDIF
	971
	972	!
	973	!-- LES / turbulence parameters
	974	WRITE ( io, 450 )
	975
	976	!--
	977	! ... LES-constants used must still be added here
	978	!--
	979	IF ( constant_diffusion ) THEN
	980	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	981	prandtl_number
	982	ENDIF
	983	IF ( .NOT. constant_diffusion) THEN
	984	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	985	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	986	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	987	ENDIF
	988
	989	!
	990	!-- Special actions during the run
	991	WRITE ( io, 470 )
	992	IF ( create_disturbances ) THEN
	993	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	994	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	995	zu(disturbance_level_ind_t), disturbance_level_ind_t
	996	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	997	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	998	ELSE
	999	WRITE ( io, 473 ) disturbance_energy_limit
	1000	ENDIF
	1001	WRITE ( io, 474 ) TRIM( random_generator )
	1002	ENDIF
	1003	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1004	WRITE ( io, 475 ) pt_surface_initial_change
	1005	ENDIF
	1006	IF ( moisture .AND. q_surface_initial_change /= 0.0 ) THEN
	1007	WRITE ( io, 476 ) q_surface_initial_change
	1008	ENDIF
	1009	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1010	WRITE ( io, 477 ) q_surface_initial_change
	1011	ENDIF
	1012
	1013	#if defined( __particles )
	1014	!
	1015	!-- Particle attributes
	1016	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1017	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
	1018	end_time_prel
	1019	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1020	IF ( random_start_position ) WRITE ( io, 481 )
	1021	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1022	WRITE ( io, 495 ) total_number_of_particles
	1023	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
	1024	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1025	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1026	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1027	WRITE ( io, 484 ) total_number_of_tails, minimum_tailpoint_distance,&
	1028	maximum_tailpoint_age
	1029	ENDIF
	1030	ENDIF
	1031	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1032	WRITE ( io, 485 ) dt_write_particle_data
	1033	output_format = ''
	1034	IF ( netcdf_output ) THEN
	1035	IF ( netcdf_64bit ) THEN
	1036	output_format = 'netcdf (64 bit offset) and binary'
	1037	ELSE
	1038	output_format = 'netcdf and binary'
	1039	ENDIF
	1040	ELSE
	1041	output_format = 'binary'
	1042	ENDIF
	1043	WRITE ( io, 345 ) output_format
	1044	ENDIF
	1045	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1046	IF ( write_particle_statistics ) WRITE ( io, 486 )
	1047
	1048	WRITE ( io, 487 ) number_of_particle_groups
	1049
	1050	DO i = 1, number_of_particle_groups
	1051	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1052	WRITE ( io, 490 ) i, 0.0
	1053	WRITE ( io, 492 )
	1054	ELSE
	1055	WRITE ( io, 490 ) i, radius(i)
	1056	IF ( density_ratio(i) /= 0.0 ) THEN
	1057	WRITE ( io, 491 ) density_ratio(i)
	1058	ELSE
	1059	WRITE ( io, 492 )
	1060	ENDIF
	1061	ENDIF
	1062	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1063	pdx(i), pdy(i), pdz(i)
	1064	ENDDO
	1065
	1066	#endif
	1067
	1068	!
	1069	!-- Parameters of 1D-model
	1070	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1071	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1072	mixing_length_1d, dissipation_1d
	1073	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1074	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1075	ENDIF
	1076	ENDIF
	1077
	1078	!
	1079	!-- User-defined informations
	1080	CALL user_header( io )
	1081
	1082	WRITE ( io, 99 )
	1083
	1084	#if defined( __ibm )
	1085	!
	1086	!-- Write buffer contents to disc immediately
	1087	CALL FLUSH_( io )
	1088	#elif defined( __lcmuk ) \|\| defined( __nec )
	1089	CALL FLUSH( io )
	1090	#endif
	1091
	1092	!
	1093	!-- Here the FORMATs start
	1094
	1095	99 FORMAT (1X,78('-'))
	1096	100 FORMAT (/10X,'****************',11X,28('-')/ &
	1097	10X,'* ',A12,'*',11X,A/ &
	1098	10X,'****************',11X,28('-')// &
	1099	' Date: ',A8,11X,'Run: ',A20/ &
	1100	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
	1101	' Run on host: ',A10)
	1102	#if defined( __parallel )
	1103	101 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
	1104	')',1X,A)
	1105	102 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
	1106	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
	1107	103 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1108	104 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
	1109	37X,'because the job is running on an SMP-cluster')
	1110	105 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
	1111	#endif
	1112	110 FORMAT (/' Numerical Schemes:'/ &
	1113	' -----------------'/)
	1114	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1115	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1116	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1117	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1118	' or Upstream')
	1119	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1120	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1121	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1122	' or Upstream')
	1123	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1124	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1125	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1126	' Translation velocity = ',A/ &
	1127	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1128	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1129	' of timestep changes)')
	1130	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1131	' timestep changes')
	1132	122 FORMAT (' --> Time differencing scheme: ',A)
	1133	123 FORMAT (' --> Rayleigh-Damping active, starts above z = ',F8.2,' m'/ &
	1134	' maximum damping coefficient: ',F5.3, ' 1/s')
	1135	124 FORMAT (' Spline-overshoots are being suppressed')
	1136	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1137	' of'/ &
	1138	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1139	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1140	' of'/ &
	1141	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1142	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1143	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1144	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1145	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1146	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1147	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1148	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1149	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1150	' effective emissivity scheme')
	1151	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1152	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1153	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1154	A,'-cycle)'/ &
	1155	' number of grid levels: ',I2/ &
	1156	' Gauss-Seidel red/black iterations: ',I2)
	1157	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1158	I3,')')
	1159	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1160	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1161	I3,')'/ &
	1162	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1163	I3,')')
	1164	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
	1165	139 FORMAT (' --> Prognostic equations are solved in one single loop (fast', &
	1166	' method)')
	1167	140 FORMAT (' maximum residual allowed: ',E10.3)
	1168	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1169	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1170	'step')
	1171	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
	1172	'conserved')
	1173	200 FORMAT (//' Run time and time step information:'/ &
	1174	' ----------------------------------'/)
	1175	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1176	' CFL-factor: ',F4.2)
	1177	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1178	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1179	' End time: ',F9.3,' s')
	1180	204 FORMAT ( A,F9.3,' s')
	1181	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1182	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1183	' CPU-time used: ',F9.3,' s per timestep: ', &
	1184	' ',F9.3,' s'/ &
	1185	' per second of simulated tim', &
	1186	'e: ',F9.3,' s')
	1187	250 FORMAT (//' Computational grid and domain size:'/ &
	1188	' ----------------------------------'// &
	1189	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1190	' m dz = ',F7.3,' m'/ &
	1191	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1192	' m z(u) = ',F10.3,' m'/)
	1193	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1194	' factor: ',F5.3/ &
	1195	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1196	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1197	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1198	255 FORMAT (' Subdomains have equal size')
	1199	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1200	'have smaller sizes'/ &
	1201	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1202	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1203	' degrees')
	1204	270 FORMAT (//' Topography informations:'/ &
	1205	' -----------------------'// &
	1206	1X,'Topography: ',A)
	1207	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1208	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1209	' / ',I4)
	1210	300 FORMAT (//' Boundary conditions:'/ &
	1211	' -------------------'// &
	1212	' p uv ', &
	1213	' pt'// &
	1214	' B. bound.: ',A/ &
	1215	' T. bound.: ',A)
	1216	301 FORMAT (/' e'// &
	1217	' B. bound.: ',A/ &
	1218	' T. bound.: ',A)
	1219	302 FORMAT (/' q'// &
	1220	' B. bound.: ',A/ &
	1221	' T. bound.: ',A)
	1222	303 FORMAT (/' Surface fluxes are used in diffusion terms at k=1')
	1223	305 FORMAT (//' Prandtl-Layer between surface and first computational ', &
	1224	'u,v-level:'// &
	1225	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1226	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1227	306 FORMAT (' Predefined constant heatflux: ',F6.3,' K m/s')
	1228	307 FORMAT (' Heatflux has a random normal distribution')
	1229	308 FORMAT (' Predefined surface temperature')
	1230	310 FORMAT (//' 1D-Model:'// &
	1231	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1232	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1233	312 FORMAT (' Predefined surface humidity')
	1234	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1235	314 FORMAT (' Predefined scalar value at the surface')
	1236	317 FORMAT (//' Lateral boundaries:'/ &
	1237	' left/right: ',A/ &
	1238	' north/south: ',A)
	1239	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1240	'max =',F5.1,' m**2/s')
	1241	320 FORMAT (//' List output:'/ &
	1242	' -----------'// &
	1243	' 1D-Profiles:'/ &
	1244	' Output every ',F8.2,' s')
	1245	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
	1246	' Averaging input every ',F8.2,' s')
	1247	330 FORMAT (//' Data output:'/ &
	1248	' -----------'/)
	1249	331 FORMAT (/' 1D-Profiles:')
	1250	332 FORMAT (/' ',A)
	1251	333 FORMAT (' Output every ',F8.2,' s',/ &
	1252	' Time averaged over ',F8.2,' s'/ &
	1253	' Averaging input every ',F8.2,' s')
	1254	334 FORMAT (/' 2D-Arrays',A,':')
	1255	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1256	' Output every ',F8.2,' s ',A/ &
	1257	' Cross sections at ',A1,' = ',A/ &
	1258	' scalar-coordinates: ',A,' m'/)
	1259	336 FORMAT (/' 3D-Arrays',A,':')
	1260	337 FORMAT (/' Arrays: ',A/ &
	1261	' Output every ',F8.2,' s ',A/ &
	1262	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1263	338 FORMAT (' Compressed data output'/ &
	1264	' Decimal precision: ',A/)
	1265	339 FORMAT (' No output during initial ',F8.2,' s')
	1266	340 FORMAT (/' Time series:')
	1267	341 FORMAT (' Output every ',F8.2,' s'/)
	1268	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1269	' Output every ',F8.2,' s ',A/ &
	1270	' Time averaged over ',F8.2,' s'/ &
	1271	' Averaging input every ',F8.2,' s'/ &
	1272	' Cross sections at ',A1,' = ',A/ &
	1273	' scalar-coordinates: ',A,' m'/)
	1274	343 FORMAT (/' Arrays: ',A/ &
	1275	' Output every ',F8.2,' s ',A/ &
	1276	' Time averaged over ',F8.2,' s'/ &
	1277	' Averaging input every ',F8.2,' s'/ &
	1278	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1279	345 FORMAT (' Output format: ',A/)
	1280	#if defined( __dvrp_graphics )
	1281	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1282	' Output every ',F7.1,' s'/ &
	1283	' Output mode: ',A/ &
	1284	' Host / User: ',A,' / ',A/ &
	1285	' Directory: ',A// &
	1286	' The sequence contains:')
	1287	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
	1288	362 FORMAT (' Sectional plane ',A)
	1289	363 FORMAT (' Particles')
	1290	#endif
	1291	#if defined( __spectra )
	1292	370 FORMAT (' Spectra:')
	1293	371 FORMAT (' Output every ',F7.1,' s'/)
	1294	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1295	' Directions: ', 10(A5,',')/ &
	1296	' height levels k = ', 9(I3,','),I3,'.'/ &
	1297	' height levels selected for standard plot:'/ &
	1298	' k = ', 9(I3,','),I3,'.'/ &
	1299	' Time averaged over ', F7.1, ' s,' / &
	1300	' Profiles for the time averaging are taken every ', &
	1301	F6.1,' s')
	1302	#endif
	1303	400 FORMAT (//' Physical quantities:'/ &
	1304	' -------------------'/)
	1305	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1306	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1307	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1308	' f* = ',F9.6,' 1/s')
	1309	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
	1310	412 FORMAT (/' Cloud physics parameters:'/ &
	1311	' ------------------------'/)
	1312	413 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
	1313	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1314	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1315	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1316	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1317	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1318	' Height: ',A,' m'/ &
	1319	' Temperature: ',A,' K'/ &
	1320	' Gradient: ',A,' K/100m'/ &
	1321	' Gridpoint: ',A)
	1322	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1323	' Height: ',A,' m'/ &
	1324	' Humidity: ',A,' kg/kg'/ &
	1325	' Gradient: ',A,' (kg/kg)/100m'/ &
	1326	' Gridpoint: ',A)
	1327	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1328	' Height: ',A,' m'/ &
	1329	' Scalar concentration: ',A,' kg/m**3'/ &
	1330	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1331	' Gridpoint: ',A)
	1332	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1333	' Height: ',A,' m'/ &
	1334	' ug: ',A,' m/s'/ &
	1335	' Gradient: ',A,' 1/100s'/ &
	1336	' Gridpoint: ',A)
	1337	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1338	' Height: ',A,' m'/ &
	1339	' vg: ',A,' m/S'/ &
	1340	' Gradient: ',A,' 1/100s'/ &
	1341	' Gridpoint: ',A)
	1342	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1343	' ---------------------------'/)
	1344	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1345	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1346	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1347	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1348	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1349	470 FORMAT (//' Actions during the simulation:'/ &
	1350	' -----------------------------'/)
	1351	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1352	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1353	' Lower disturbance level : ',F7.2,' m (GP ',I4,')'/ &
	1354	' Upper disturbance level : ',F7.2,' m (GP ',I4,')')
	1355	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1356	' to i/j =',I4)
	1357	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1358	1X,F5.3, ' m2/s2')
	1359	474 FORMAT (' Random number generator used : ',A/)
	1360	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1361	'respectively, if'/ &
	1362	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1363	' 3D-simulation'/)
	1364	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1365	'respectively, if the'/ &
	1366	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1367	' the 3D-simulation'/)
	1368	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1369	'respectively, if the'/ &
	1370	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1371	' the 3D-simulation'/)
	1372	#if defined( __particles )
	1373	480 FORMAT (' Particles:'/ &
	1374	' ---------'// &
	1375	' Particle advection is active (switched on at t = ', F7.1, &
	1376	' s)'/ &
	1377	' Start of new particle generations every ',F6.1,' s'/ &
	1378	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1379	' bottom: ', A, ' top: ', A/&
	1380	' Maximum particle age: ',F9.1,' s'/ &
	1381	' Advection stopped at t = ',F9.1,' s'/)
	1382	481 FORMAT (' Particles have random start positions'/)
	1383	482 FORMAT (' Particles are advected only horizontally'/)
	1384	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1385	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1386	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1387	' Maximum age of the end of the tail: ',F8.2,' s')
	1388	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1389	486 FORMAT (' Particle statistics are written on file'/)
	1390	487 FORMAT (' Number of particle groups: ',I2/)
	1391	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1392	' minimum timestep for advection: ', F7.5/)
	1393	489 FORMAT (' Number of particles simultaneously released at each ', &
	1394	'point: ', I5/)
	1395	490 FORMAT (' Particle group ',I2,':'/ &
	1396	' Particle radius: ',E10.3, 'm')
	1397	491 FORMAT (' Particle inertia is activated'/ &
	1398	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1399	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1400	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1401	' y:',F8.1,' - ',F8.1,' m'/&
	1402	' z:',F8.1,' - ',F8.1,' m'/&
	1403	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1404	' m dz = ',F8.1,' m'/)
	1405	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1406	F8.2,' s'/)
	1407	495 FORMAT (' Number of particles in total domain: ',I10/)
	1408	#endif
	1409	500 FORMAT (//' 1D-Model parameters:'/ &
	1410	' -------------------'// &
	1411	' Simulation time: ',F8.1,' s'/ &
	1412	' Run-controll output every: ',F8.1,' s'/ &
	1413	' Vertical profile output every: ',F8.1,' s'/ &
	1414	' Mixing length calculation: ',A/ &
	1415	' Dissipation calculation: ',A/)
	1416	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1417
	1418
	1419	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |