Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 4517

Last change on this file since 4517 was 4502, checked in by schwenkel, 5 years ago
Implementation of ice microphysics
Property svn:keywords set to `Id`
File size: 114.4 KB

Line
1	!> @file flow_statistics.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2020 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! ------------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: flow_statistics.f90 4502 2020-04-17 16:14:16Z raasch $
27	! Implementation of ice microphysics
28	!
29	! 4472 2020-03-24 12:21:00Z Giersch
30	! Calculations of the Kolmogorov lengt scale eta implemented
31	!
32	! 4464 2020-03-17 11:08:46Z Giersch
33	! Reset last change (r4463)
34	!
35	! 4463 2020-03-17 09:27:36Z Giersch
36	! Calculate horizontally averaged profiles of all velocity components at the
37	! same place
38	!
39	! 4444 2020-03-05 15:59:50Z raasch
40	! bugfix: cpp-directives for serial mode added
41	!
42	! 4442 2020-03-04 19:21:13Z suehring
43	! Change order of dimension in surface array %frac to allow for better
44	! vectorization.
45	!
46	! 4441 2020-03-04 19:20:35Z suehring
47	! Introduction of wall_flags_total_0, which currently sets bits based on static
48	! topography information used in wall_flags_static_0
49	!
50	! 4329 2019-12-10 15:46:36Z motisi
51	! Renamed wall_flags_0 to wall_flags_static_0
52	!
53	! 4182 2019-08-22 15:20:23Z scharf
54	! Corrected "Former revisions" section
55	!
56	! 4131 2019-08-02 11:06:18Z monakurppa
57	! Allow profile output for salsa variables.
58	!
59	! 4039 2019-06-18 10:32:41Z suehring
60	! Correct conversion to kinematic scalar fluxes in case of pw-scheme and
61	! statistic regions
62	!
63	! 3828 2019-03-27 19:36:23Z raasch
64	! unused variables removed
65	!
66	! 3676 2019-01-16 15:07:05Z knoop
67	! Bugfix, terminate OMP Parallel block
68	!
69	! Revision 1.1 1997/08/11 06:15:17 raasch
70	! Initial revision
71	!
72	!
73	! Description:
74	! ------------
75	!> Compute average profiles and further average flow quantities for the different
76	!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
77	!>
78	!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
79	!> lower vertical index for k-loops for all variables, although strictly
80	!> speaking the k-loops would have to be split up according to the staggered
81	!> grid. However, this implies no error since staggered velocity components
82	!> are zero at the walls and inside buildings.
83	!------------------------------------------------------------------------------!
84	SUBROUTINE flow_statistics
85
86
87	USE arrays_3d, &
88	ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
89	momentumflux_output_conversion, nc, ni, nr, p, prho, prr, pt, q,&
90	qc, qi, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
91	sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, &
92	zw, d_exner
93
94	USE basic_constants_and_equations_mod, &
95	ONLY: g, lv_d_cp
96
97	USE bulk_cloud_model_mod, &
98	ONLY: bulk_cloud_model, microphysics_morrison, microphysics_seifert, &
99	microphysics_ice_extension
100
101	USE chem_modules, &
102	ONLY: max_pr_cs
103
104	USE control_parameters, &
105	ONLY: air_chemistry, average_count_pr, cloud_droplets, do_sum, &
106	dt_3d, humidity, initializing_actions, kolmogorov_length_scale,&
107	land_surface, large_scale_forcing, large_scale_subsidence, &
108	max_pr_user, message_string, neutral, ocean_mode, &
109	passive_scalar, simulated_time, simulated_time_at_begin, &
110	use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
111	ws_scheme_mom, ws_scheme_sca, salsa, max_pr_salsa
112
113	USE cpulog, &
114	ONLY: cpu_log, log_point
115
116	USE grid_variables, &
117	ONLY: ddx, ddy
118
119	USE indices, &
120	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, nxl, nxr, nyn, &
121	nys, nzb, nzt, topo_min_level, wall_flags_total_0
122
123	#if defined( __parallel )
124	USE indices, &
125	ONLY: ngp_sums, ngp_sums_ls
126	#endif
127
128	USE kinds
129
130	USE land_surface_model_mod, &
131	ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
132
133	USE lsf_nudging_mod, &
134	ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
135
136	USE module_interface, &
137	ONLY: module_interface_statistics
138
139	USE netcdf_interface, &
140	ONLY: dots_rad, dots_soil, dots_max
141
142	USE pegrid
143
144	USE radiation_model_mod, &
145	ONLY: radiation, radiation_scheme, &
146	rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
147	rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
148
149	USE statistics
150
151	USE surface_mod, &
152	ONLY : surf_def_h, surf_lsm_h, surf_usm_h
153
154
155	IMPLICIT NONE
156
157	INTEGER(iwp) :: i !<
158	INTEGER(iwp) :: j !<
159	INTEGER(iwp) :: k !<
160	INTEGER(iwp) :: ki !<
161	INTEGER(iwp) :: k_surface_level !<
162	INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
163	INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
164	INTEGER(iwp) :: nt !<
165	!$ INTEGER(iwp) :: omp_get_thread_num !<
166	INTEGER(iwp) :: sr !<
167	INTEGER(iwp) :: tn !<
168
169	LOGICAL :: first !<
170
171	REAL(wp) :: dissipation !< dissipation rate
172	REAL(wp) :: dptdz_threshold !<
173	REAL(wp) :: du_dx !< Derivative of u fluctuations with respect to x
174	REAL(wp) :: du_dy !< Derivative of u fluctuations with respect to y
175	REAL(wp) :: du_dz !< Derivative of u fluctuations with respect to z
176	REAL(wp) :: dv_dx !< Derivative of v fluctuations with respect to x
177	REAL(wp) :: dv_dy !< Derivative of v fluctuations with respect to y
178	REAL(wp) :: dv_dz !< Derivative of v fluctuations with respect to z
179	REAL(wp) :: dw_dx !< Derivative of w fluctuations with respect to x
180	REAL(wp) :: dw_dy !< Derivative of w fluctuations with respect to y
181	REAL(wp) :: dw_dz !< Derivative of w fluctuations with respect to z
182	REAL(wp) :: eta !< Kolmogorov length scale
183	REAL(wp) :: fac !<
184	REAL(wp) :: flag !<
185	REAL(wp) :: height !<
186	REAL(wp) :: pts !<
187	REAL(wp) :: s11 !< fluctuating rate-of-strain tensor component 11
188	REAL(wp) :: s21 !< fluctuating rate-of-strain tensor component 21
189	REAL(wp) :: s31 !< fluctuating rate-of-strain tensor component 31
190	REAL(wp) :: s12 !< fluctuating rate-of-strain tensor component 12
191	REAL(wp) :: s22 !< fluctuating rate-of-strain tensor component 22
192	REAL(wp) :: s32 !< fluctuating rate-of-strain tensor component 32
193	REAL(wp) :: s13 !< fluctuating rate-of-strain tensor component 13
194	REAL(wp) :: s23 !< fluctuating rate-of-strain tensor component 23
195	REAL(wp) :: s33 !< fluctuating rate-of-strain tensor component 33
196	REAL(wp) :: sums_l_etot !<
197	REAL(wp) :: ust !<
198	REAL(wp) :: ust2 !<
199	REAL(wp) :: u2 !<
200	REAL(wp) :: vst !<
201	REAL(wp) :: vst2 !<
202	REAL(wp) :: v2 !<
203	REAL(wp) :: w2 !<
204
205	REAL(wp) :: dptdz(nzb+1:nzt+1) !<
206	REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
207
208	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
209
210
211	!
212	!-- To be on the safe side, check whether flow_statistics has already been
213	!-- called once after the current time step
214	IF ( flow_statistics_called ) THEN
215
216	message_string = 'flow_statistics is called two times within one ' // &
217	'timestep'
218	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
219
220	ENDIF
221
222	!
223	!-- Compute statistics for each (sub-)region
224	DO sr = 0, statistic_regions
225
226	!
227	!-- Initialize (local) summation array
228	sums_l = 0.0_wp
229	#ifdef _OPENACC
230	!$ACC KERNELS PRESENT(sums_l)
231	sums_l = 0.0_wp
232	!$ACC END KERNELS
233	#endif
234
235	!
236	!-- Store sums that have been computed in other subroutines in summation
237	!-- array
238	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
239	!-- WARNING: next line still has to be adjusted for OpenMP
240	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
241	heatflux_output_conversion ! heat flux from advec_s_bc
242	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
243	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
244
245	!
246	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
247	!-- scale) vertical fluxes and velocity variances by using commonly-
248	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
249	!-- in combination with the 5th order advection scheme, pronounced
250	!-- artificial kinks could be observed in the vertical profiles near the
251	!-- surface. Please note: these kinks were not related to the model truth,
252	!-- i.e. these kinks are just related to an evaluation problem.
253	!-- In order avoid these kinks, vertical fluxes and horizontal as well
254	!-- vertical velocity variances are calculated directly within the advection
255	!-- routines, according to the numerical discretization, to evaluate the
256	!-- statistical quantities as they will appear within the prognostic
257	!-- equations.
258	!-- Copy the turbulent quantities, evaluated in the advection routines to
259	!-- the local array sums_l() for further computations.
260	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
261
262	!
263	!-- According to the Neumann bc for the horizontal velocity components,
264	!-- the corresponding fluxes has to satisfiy the same bc.
265	IF ( ocean_mode ) THEN
266	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
267	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
268	ENDIF
269
270	DO i = 0, threads_per_task-1
271	!
272	!-- Swap the turbulent quantities evaluated in advec_ws.
273	sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
274	* momentumflux_output_conversion ! wu
275	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
276	* momentumflux_output_conversion ! wv
277	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
278	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
279	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
280	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
281	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
282	sums_ws2_ws_l(:,i) ) ! e*
283	ENDDO
284
285	ENDIF
286
287	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
288
289	DO i = 0, threads_per_task-1
290	sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
291	* heatflux_output_conversion ! wpt
292	IF ( ocean_mode ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
293	IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
294	* waterflux_output_conversion ! wq
295	IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! ws
296	ENDDO
297
298	ENDIF
299	!
300	!-- Horizontally averaged profiles of horizontal velocities and temperature.
301	!-- They must have been computed before, because they are already required
302	!-- for other horizontal averages.
303	tn = 0
304	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
305	!$ tn = omp_get_thread_num()
306	!$OMP DO
307	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag) &
308	!$ACC PRESENT(wall_flags_total_0, u, v, pt, rmask, sums_l)
309	DO i = nxl, nxr
310	DO j = nys, nyn
311	DO k = nzb, nzt+1
312	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
313	!$ACC ATOMIC
314	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
315	* flag
316	!$ACC ATOMIC
317	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
318	* flag
319	!$ACC ATOMIC
320	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
321	* flag
322	ENDDO
323	ENDDO
324	ENDDO
325	!$ACC UPDATE HOST(sums_l(:,1,tn), sums_l(:,2,tn), sums_l(:,4,tn))
326
327	!
328	!-- Horizontally averaged profile of salinity
329	IF ( ocean_mode ) THEN
330	!$OMP DO
331	DO i = nxl, nxr
332	DO j = nys, nyn
333	DO k = nzb, nzt+1
334	sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
335	* rmask(j,i,sr) &
336	* MERGE( 1.0_wp, 0.0_wp, &
337	BTEST( wall_flags_total_0(k,j,i), 22 ) )
338	ENDDO
339	ENDDO
340	ENDDO
341	ENDIF
342
343	!
344	!-- Horizontally averaged profiles of virtual potential temperature,
345	!-- total water content, water vapor mixing ratio and liquid water potential
346	!-- temperature
347	IF ( humidity ) THEN
348	!$OMP DO
349	DO i = nxl, nxr
350	DO j = nys, nyn
351	DO k = nzb, nzt+1
352	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
353	sums_l(k,44,tn) = sums_l(k,44,tn) + &
354	vpt(k,j,i) * rmask(j,i,sr) * flag
355	sums_l(k,41,tn) = sums_l(k,41,tn) + &
356	q(k,j,i) * rmask(j,i,sr) * flag
357	ENDDO
358	ENDDO
359	ENDDO
360	IF ( bulk_cloud_model ) THEN
361	!$OMP DO
362	DO i = nxl, nxr
363	DO j = nys, nyn
364	DO k = nzb, nzt+1
365	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
366	sums_l(k,42,tn) = sums_l(k,42,tn) + &
367	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
368	* flag
369	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
370	pt(k,j,i) + lv_d_cp * d_exner(k) * ql(k,j,i) &
371	) * rmask(j,i,sr) &
372	* flag
373	ENDDO
374	ENDDO
375	ENDDO
376	ENDIF
377	ENDIF
378
379	!
380	!-- Horizontally averaged profiles of passive scalar
381	IF ( passive_scalar ) THEN
382	!$OMP DO
383	DO i = nxl, nxr
384	DO j = nys, nyn
385	DO k = nzb, nzt+1
386	sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
387	* rmask(j,i,sr) &
388	* MERGE( 1.0_wp, 0.0_wp, &
389	BTEST( wall_flags_total_0(k,j,i), 22 ) )
390	ENDDO
391	ENDDO
392	ENDDO
393	ENDIF
394	!$OMP END PARALLEL
395	!
396	!-- Summation of thread sums
397	IF ( threads_per_task > 1 ) THEN
398	DO i = 1, threads_per_task-1
399	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
400	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
401	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
402	IF ( ocean_mode ) THEN
403	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
404	ENDIF
405	IF ( humidity ) THEN
406	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
407	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
408	IF ( bulk_cloud_model ) THEN
409	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
410	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
411	ENDIF
412	ENDIF
413	IF ( passive_scalar ) THEN
414	sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
415	ENDIF
416	ENDDO
417	ENDIF
418
419	#if defined( __parallel )
420	!
421	!-- Compute total sum from local sums
422	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
423	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
424	MPI_SUM, comm2d, ierr )
425	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
426	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
427	MPI_SUM, comm2d, ierr )
428	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
429	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
430	MPI_SUM, comm2d, ierr )
431	IF ( ocean_mode ) THEN
432	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
433	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
434	MPI_REAL, MPI_SUM, comm2d, ierr )
435	ENDIF
436	IF ( humidity ) THEN
437	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
438	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
439	MPI_REAL, MPI_SUM, comm2d, ierr )
440	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
441	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
442	MPI_REAL, MPI_SUM, comm2d, ierr )
443	IF ( bulk_cloud_model ) THEN
444	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
445	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
446	MPI_REAL, MPI_SUM, comm2d, ierr )
447	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
448	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
449	MPI_REAL, MPI_SUM, comm2d, ierr )
450	ENDIF
451	ENDIF
452
453	IF ( passive_scalar ) THEN
454	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
455	CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
456	MPI_REAL, MPI_SUM, comm2d, ierr )
457	ENDIF
458	#else
459	sums(:,1) = sums_l(:,1,0)
460	sums(:,2) = sums_l(:,2,0)
461	sums(:,4) = sums_l(:,4,0)
462	IF ( ocean_mode ) sums(:,23) = sums_l(:,23,0)
463	IF ( humidity ) THEN
464	sums(:,44) = sums_l(:,44,0)
465	sums(:,41) = sums_l(:,41,0)
466	IF ( bulk_cloud_model ) THEN
467	sums(:,42) = sums_l(:,42,0)
468	sums(:,43) = sums_l(:,43,0)
469	ENDIF
470	ENDIF
471	IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
472	#endif
473
474	!
475	!-- Final values are obtained by division by the total number of grid points
476	!-- used for summation. After that store profiles.
477	sums(:,1) = sums(:,1) / ngp_2dh(sr)
478	sums(:,2) = sums(:,2) / ngp_2dh(sr)
479	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
480	hom(:,1,1,sr) = sums(:,1) ! u
481	hom(:,1,2,sr) = sums(:,2) ! v
482	hom(:,1,4,sr) = sums(:,4) ! pt
483	!$ACC UPDATE DEVICE(hom(:,1,1,sr), hom(:,1,2,sr), hom(:,1,4,sr))
484
485
486	!
487	!-- Salinity
488	IF ( ocean_mode ) THEN
489	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
490	hom(:,1,23,sr) = sums(:,23) ! sa
491	ENDIF
492
493	!
494	!-- Humidity and cloud parameters
495	IF ( humidity ) THEN
496	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
497	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
498	hom(:,1,44,sr) = sums(:,44) ! vpt
499	hom(:,1,41,sr) = sums(:,41) ! qv (q)
500	IF ( bulk_cloud_model ) THEN
501	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
502	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
503	hom(:,1,42,sr) = sums(:,42) ! qv
504	hom(:,1,43,sr) = sums(:,43) ! pt
505	ENDIF
506	ENDIF
507
508	!
509	!-- Passive scalar
510	IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
511	ngp_2dh_s_inner(:,sr) ! s
512
513	!
514	!-- Horizontally averaged profiles of the remaining prognostic variables,
515	!-- variances, the total and the perturbation energy (single values in last
516	!-- column of sums_l) and some diagnostic quantities.
517	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
518	!-- ---- speaking the following k-loop would have to be split up and
519	!-- rearranged according to the staggered grid.
520	!-- However, this implies no error since staggered velocity components
521	!-- are zero at the walls and inside buildings.
522	tn = 0
523	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, &
524	!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
525	!$OMP w2, flag, m, ki, l )
526	!$ tn = omp_get_thread_num()
527	!$OMP DO
528	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, m) &
529	!$ACC PRIVATE(sums_l_etot, flag, du_dx, du_dy, du_dz) &
530	!$ACC PRIVATE(dv_dx, dv_dy, dv_dz, dw_dx, dw_dy, dw_dz) &
531	!$ACC PRIVATE(s11, s21, s31, s12, s22, s32, s13, s23, s33) &
532	!$ACC PRIVATE(dissipation, eta) &
533	!$ACC PRESENT(wall_flags_total_0, rmask, momentumflux_output_conversion) &
534	!$ACC PRESENT(hom(:,1,1:2,sr), hom(:,1,4,sr)) &
535	!$ACC PRESENT(e, u, v, w, km, kh, p, pt) &
536	!$ACC PRESENT(ddx, ddy, ddzu, ddzw) &
537	!$ACC PRESENT(surf_def_h(0), surf_lsm_h, surf_usm_h) &
538	!$ACC PRESENT(sums_l)
539	DO i = nxl, nxr
540	DO j = nys, nyn
541	sums_l_etot = 0.0_wp
542	DO k = nzb, nzt+1
543	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
544	!
545	!-- Prognostic and diagnostic variables
546	!$ACC ATOMIC
547	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
548	* flag
549	!$ACC ATOMIC
550	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
551	* flag
552	!$ACC ATOMIC
553	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
554	* flag
555	!$ACC ATOMIC
556	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
557	* flag
558	!$ACC ATOMIC
559	sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
560	/ momentumflux_output_conversion(k) ) &
561	* flag
562
563	!$ACC ATOMIC
564	sums_l(k,33,tn) = sums_l(k,33,tn) + &
565	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)&
566	* flag
567	#ifndef _OPENACC
568	IF ( humidity ) THEN
569	sums_l(k,70,tn) = sums_l(k,70,tn) + &
570	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)&
571	* flag
572	ENDIF
573	IF ( passive_scalar ) THEN
574	sums_l(k,116,tn) = sums_l(k,116,tn) + &
575	( s(k,j,i)-hom(k,1,115,sr) )*2 rmask(j,i,sr)&
576	* flag
577	ENDIF
578	#endif
579	!
580	!-- Higher moments
581	!-- (Computation of the skewness of w further below)
582	!$ACC ATOMIC
583	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr) &
584	* flag
585
586	sums_l_etot = sums_l_etot + &
587	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
588	w(k,j,i)*2 ) rmask(j,i,sr)&
589	* flag
590
591	!
592	!-- Computation of the Kolmogorov length scale. Calculation is based
593	!-- on gradients of the deviations from the horizontal mean.
594	!-- Kolmogorov scale at the boundaries (k=0/z=0m and k=nzt+1) is set to zero.
595	IF ( kolmogorov_length_scale .AND. k /= nzb .AND. k /= nzt+1) THEN
596	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
597
598	!
599	!-- Calculate components of the fluctuating rate-of-strain tensor
600	!-- (0.5*(del u'_i/del x_j + del u'_j/del x_i)) defined in the
601	!-- center of each grid box.
602	du_dx = ( ( u(k,j,i+1) - hom(k,1,1,sr) ) - &
603	( u(k,j,i) - hom(k,1,1,sr) ) ) * ddx
604	du_dy = 0.25_wp * ddy * &
605	( ( u(k,j+1,i) - hom(k,1,1,sr) ) - &
606	( u(k,j-1,i) - hom(k,1,1,sr) ) + &
607	( u(k,j+1,i+1) - hom(k,1,1,sr) ) - &
608	( u(k,j-1,i+1) - hom(k,1,1,sr) ) )
609	du_dz = 0.25_wp * ( ( ( u(k+1,j,i) - hom(k+1,1,1,sr) ) - &
610	( u(k,j,i) - hom(k,1,1,sr) ) ) * &
611	ddzu(k+1) + &
612	( ( u(k,j,i) - hom(k,1,1,sr) ) - &
613	( u(k-1,j,i) - hom(k-1,1,1,sr) ) )* &
614	ddzu(k) + &
615	( ( u(k+1,j,i+1) - hom(k+1,1,1,sr) )- &
616	( u(k,j,i+1) - hom(k,1,1,sr) ) ) * &
617	ddzu(k+1) + &
618	( ( u(k,j,i+1) - hom(k,1,1,sr) ) - &
619	( u(k-1,j,i+1) - hom(k-1,1,1,sr) ) ) *&
620	ddzu(k) )
621
622	dv_dx = 0.25_wp * ddx * &
623	( ( v(k,j,i+1) - hom(k,1,2,sr) ) - &
624	( v(k,j,i-1) - hom(k,1,2,sr) ) + &
625	( v(k,j+1,i+1) - hom(k,1,2,sr) ) - &
626	( v(k,j+1,i-1) - hom(k,1,2,sr) ) )
627	dv_dy = ( ( v(k,j+1,i) - hom(k,1,2,sr) ) - &
628	( v(k,j,i) - hom(k,1,2,sr) ) ) * ddy
629	dv_dz = 0.25_wp * ( ( ( v(k+1,j,i) - hom(k+1,1,2,sr) ) - &
630	( v(k,j,i) - hom(k,1,2,sr) ) ) * &
631	ddzu(k+1) + &
632	( ( v(k,j,i) - hom(k,1,2,sr) ) - &
633	( v(k-1,j,i) - hom(k-1,1,2,sr) ) ) * &
634	ddzu(k) + &
635	( ( v(k+1,j+1,i) - hom(k+1,1,2,sr) ) - &
636	( v(k,j+1,i) - hom(k,1,2,sr) ) ) * &
637	ddzu(k+1) + &
638	( ( v(k,j+1,i) - hom(k,1,2,sr) ) - &
639	( v(k-1,j+1,i) - hom(k-1,1,2,sr) ) ) *&
640	ddzu(k) )
641
642	dw_dx = 0.25_wp * ddx * ( w(k,j,i+1) - w(k,j,i-1) + &
643	w(k-1,j,i+1) - w(k-1,j,i-1) )
644	dw_dy = 0.25_wp * ddy * ( w(k,j+1,i) - w(k,j-1,i) + &
645	w(k-1,j+1,i) - w(k-1,j-1,i) )
646	dw_dz = ( w(k,j,i) - w(k-1,j,i) ) * ddzw(k)
647
648	s11 = 0.5_wp * ( du_dx + du_dx )
649	s21 = 0.5_wp * ( dv_dx + du_dy )
650	s31 = 0.5_wp * ( dw_dx + du_dz )
651
652	s12 = s21
653	s22 = 0.5 * ( dv_dy + dv_dy )
654	s32 = 0.5 * ( dw_dy + dv_dz )
655
656	s13 = s31
657	s23 = s32
658	s33 = 0.5_wp * ( dw_dz + dw_dz )
659
660	!-- Calculate 3D instantaneous energy dissipation rate after
661	!-- Pope (2000): Turbulent flows, p.259. It is defined in the center
662	!-- of each grid volume.
663	dissipation = 2.0_wp * km(k,j,i) * &
664	( s11s11 + s21s21 + s31*s31 + &
665	s12s12 + s22s22 + s32*s32 + &
666	s13s13 + s23s23 + s33*s33 )
667	eta = ( km(k,j,i)3.0_wp / ( dissipation+1.0E-12 ) )(1.0_wp/4.0_wp)
668
669	!$ACC ATOMIC
670	sums_l(k,121,tn) = sums_l(k,121,tn) + eta * rmask(j,i,sr) &
671	* flag
672
673
674	ENDIF !Kolmogorov length scale
675
676	ENDDO !k-loop
677	!
678	!-- Total and perturbation energy for the total domain (being
679	!-- collected in the last column of sums_l). Summation of these
680	!-- quantities is seperated from the previous loop in order to
681	!-- allow vectorization of that loop.
682	!$ACC ATOMIC
683	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
684	!
685	!-- 2D-arrays (being collected in the last column of sums_l)
686	IF ( surf_def_h(0)%end_index(j,i) >= &
687	surf_def_h(0)%start_index(j,i) ) THEN
688	m = surf_def_h(0)%start_index(j,i)
689	!$ACC ATOMIC
690	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
691	surf_def_h(0)%us(m) * rmask(j,i,sr)
692	!$ACC ATOMIC
693	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
694	surf_def_h(0)%usws(m) * rmask(j,i,sr)
695	!$ACC ATOMIC
696	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
697	surf_def_h(0)%vsws(m) * rmask(j,i,sr)
698	!$ACC ATOMIC
699	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
700	surf_def_h(0)%ts(m) * rmask(j,i,sr)
701	#ifndef _OPENACC
702	IF ( humidity ) THEN
703	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
704	surf_def_h(0)%qs(m) * rmask(j,i,sr)
705	ENDIF
706	IF ( passive_scalar ) THEN
707	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
708	surf_def_h(0)%ss(m) * rmask(j,i,sr)
709	ENDIF
710	#endif
711	!
712	!-- Summation of surface temperature.
713	!$ACC ATOMIC
714	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
715	surf_def_h(0)%pt_surface(m) * &
716	rmask(j,i,sr)
717	ENDIF
718	IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
719	m = surf_lsm_h%start_index(j,i)
720	!$ACC ATOMIC
721	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
722	surf_lsm_h%us(m) * rmask(j,i,sr)
723	!$ACC ATOMIC
724	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
725	surf_lsm_h%usws(m) * rmask(j,i,sr)
726	!$ACC ATOMIC
727	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
728	surf_lsm_h%vsws(m) * rmask(j,i,sr)
729	!$ACC ATOMIC
730	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
731	surf_lsm_h%ts(m) * rmask(j,i,sr)
732	#ifndef _OPENACC
733	IF ( humidity ) THEN
734	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
735	surf_lsm_h%qs(m) * rmask(j,i,sr)
736	ENDIF
737	IF ( passive_scalar ) THEN
738	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
739	surf_lsm_h%ss(m) * rmask(j,i,sr)
740	ENDIF
741	#endif
742	!
743	!-- Summation of surface temperature.
744	!$ACC ATOMIC
745	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
746	surf_lsm_h%pt_surface(m) * &
747	rmask(j,i,sr)
748	ENDIF
749	IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
750	m = surf_usm_h%start_index(j,i)
751	!$ACC ATOMIC
752	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
753	surf_usm_h%us(m) * rmask(j,i,sr)
754	!$ACC ATOMIC
755	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
756	surf_usm_h%usws(m) * rmask(j,i,sr)
757	!$ACC ATOMIC
758	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
759	surf_usm_h%vsws(m) * rmask(j,i,sr)
760	!$ACC ATOMIC
761	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
762	surf_usm_h%ts(m) * rmask(j,i,sr)
763	#ifndef _OPENACC
764	IF ( humidity ) THEN
765	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
766	surf_usm_h%qs(m) * rmask(j,i,sr)
767	ENDIF
768	IF ( passive_scalar ) THEN
769	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
770	surf_usm_h%ss(m) * rmask(j,i,sr)
771	ENDIF
772	#endif
773	!
774	!-- Summation of surface temperature.
775	!$ACC ATOMIC
776	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
777	surf_usm_h%pt_surface(m) * &
778	rmask(j,i,sr)
779	ENDIF
780	ENDDO !j-loop
781	ENDDO !i-loop
782	!$ACC UPDATE &
783	!$ACC HOST(sums_l(:,3,tn), sums_l(:,8,tn), sums_l(:,9,tn)) &
784	!$ACC HOST(sums_l(:,10,tn), sums_l(:,40,tn), sums_l(:,33,tn)) &
785	!$ACC HOST(sums_l(:,38,tn), sums_l(:,121,tn)) &
786	!$ACC HOST(sums_l(nzb:nzb+4,pr_palm,tn), sums_l(nzb+14:nzb+14,pr_palm,tn))
787
788	!
789	!-- Computation of statistics when ws-scheme is not used. Else these
790	!-- quantities are evaluated in the advection routines.
791	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
792	THEN
793	!$OMP DO
794	DO i = nxl, nxr
795	DO j = nys, nyn
796	DO k = nzb, nzt+1
797	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
798
799	u2 = u(k,j,i)**2
800	v2 = v(k,j,i)**2
801	w2 = w(k,j,i)**2
802	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
803	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
804
805	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
806	* flag
807	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
808	* flag
809	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
810	* flag
811	!
812	!-- Perturbation energy
813
814	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
815	( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
816	* flag
817	ENDDO
818	ENDDO
819	ENDDO
820	ENDIF
821	!
822	!-- Computaion of domain-averaged perturbation energy. Please note,
823	!-- to prevent that perturbation energy is larger (even if only slightly)
824	!-- than the total kinetic energy, calculation is based on deviations from
825	!-- the horizontal mean, instead of spatial descretization of the advection
826	!-- term.
827	!$OMP DO
828	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag, w2, ust2, vst2) &
829	!$ACC PRESENT(wall_flags_total_0, u, v, w, rmask, hom(:,1,1:2,sr)) &
830	!$ACC PRESENT(sums_l)
831	DO i = nxl, nxr
832	DO j = nys, nyn
833	DO k = nzb, nzt+1
834	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
835
836	w2 = w(k,j,i)**2
837	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
838	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
839	w2 = w(k,j,i)**2
840
841	!$ACC ATOMIC
842	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
843	+ 0.5_wp * ( ust2 + vst2 + w2 ) &
844	* rmask(j,i,sr) &
845	* flag
846
847	ENDDO
848	ENDDO
849	ENDDO
850	!$ACC UPDATE HOST(sums_l(nzb+5:nzb+5,pr_palm,tn))
851
852	!
853	!-- Horizontally averaged profiles of the vertical fluxes
854
855	!$OMP DO
856	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, l, m) &
857	!$ACC PRIVATE(ki, flag, ust, vst, pts) &
858	!$ACC PRESENT(kh, km, u, v, w, pt) &
859	!$ACC PRESENT(wall_flags_total_0, rmask, ddzu, rho_air_zw, hom(:,1,1:4,sr)) &
860	!$ACC PRESENT(heatflux_output_conversion, momentumflux_output_conversion) &
861	!$ACC PRESENT(surf_def_h(0:2), surf_lsm_h, surf_usm_h) &
862	!$ACC PRESENT(sums_l)
863	DO i = nxl, nxr
864	DO j = nys, nyn
865	!
866	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
867	!-- oterwise from k=nzb+1)
868	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
869	!-- ---- strictly speaking the following k-loop would have to be
870	!-- split up according to the staggered grid.
871	!-- However, this implies no error since staggered velocity
872	!-- components are zero at the walls and inside buildings.
873	!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
874	!-- which are added further below.
875	DO k = nzb, nzt
876	flag = MERGE( 1.0_wp, 0.0_wp, &
877	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
878	MERGE( 1.0_wp, 0.0_wp, &
879	BTEST( wall_flags_total_0(k,j,i), 9 ) )
880	!
881	!-- Momentum flux w"u"
882	!$ACC ATOMIC
883	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
884	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
885	) * ( &
886	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
887	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
888	) * rmask(j,i,sr) &
889	* rho_air_zw(k) &
890	* momentumflux_output_conversion(k) &
891	* flag
892	!
893	!-- Momentum flux w"v"
894	!$ACC ATOMIC
895	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
896	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
897	) * ( &
898	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
899	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
900	) * rmask(j,i,sr) &
901	* rho_air_zw(k) &
902	* momentumflux_output_conversion(k) &
903	* flag
904	!
905	!-- Heat flux w"pt"
906	!$ACC ATOMIC
907	sums_l(k,16,tn) = sums_l(k,16,tn) &
908	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
909	* ( pt(k+1,j,i) - pt(k,j,i) ) &
910	* rho_air_zw(k) &
911	* heatflux_output_conversion(k) &
912	* ddzu(k+1) * rmask(j,i,sr) &
913	* flag
914
915	!
916	!-- Salinity flux w"sa"
917	#ifndef _OPENACC
918	IF ( ocean_mode ) THEN
919	sums_l(k,65,tn) = sums_l(k,65,tn) &
920	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
921	* ( sa(k+1,j,i) - sa(k,j,i) ) &
922	* ddzu(k+1) * rmask(j,i,sr) &
923	* flag
924	ENDIF
925
926	!
927	!-- Buoyancy flux, water flux (humidity flux) w"q"
928	IF ( humidity ) THEN
929	sums_l(k,45,tn) = sums_l(k,45,tn) &
930	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
931	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
932	* rho_air_zw(k) &
933	* heatflux_output_conversion(k) &
934	* ddzu(k+1) * rmask(j,i,sr) * flag
935	sums_l(k,48,tn) = sums_l(k,48,tn) &
936	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
937	* ( q(k+1,j,i) - q(k,j,i) ) &
938	* rho_air_zw(k) &
939	* waterflux_output_conversion(k)&
940	* ddzu(k+1) * rmask(j,i,sr) * flag
941
942	IF ( bulk_cloud_model ) THEN
943	sums_l(k,51,tn) = sums_l(k,51,tn) &
944	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
945	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
946	- ( q(k,j,i) - ql(k,j,i) ) ) &
947	* rho_air_zw(k) &
948	* waterflux_output_conversion(k)&
949	* ddzu(k+1) * rmask(j,i,sr) * flag
950	ENDIF
951	ENDIF
952
953	!
954	!-- Passive scalar flux
955	IF ( passive_scalar ) THEN
956	sums_l(k,117,tn) = sums_l(k,117,tn) &
957	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
958	* ( s(k+1,j,i) - s(k,j,i) ) &
959	* ddzu(k+1) * rmask(j,i,sr) &
960	* flag
961	ENDIF
962	#endif
963
964	ENDDO
965
966	!
967	!-- Subgridscale fluxes in the Prandtl layer
968	IF ( use_surface_fluxes ) THEN
969	DO l = 0, 1
970	! The original code using MERGE doesn't work with the PGI
971	! compiler when running on the GPU.
972	! This is submitted as a compiler Bug in PGI ticket TPR#26718
973	! ki = MERGE( -1, 0, l == 0 )
974	ki = -1 + l
975	IF ( surf_def_h(l)%ns >= 1 ) THEN
976	DO m = surf_def_h(l)%start_index(j,i), &
977	surf_def_h(l)%end_index(j,i)
978	k = surf_def_h(l)%k(m)
979
980	!$ACC ATOMIC
981	sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
982	momentumflux_output_conversion(k+ki) * &
983	surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
984	!$ACC ATOMIC
985	sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
986	momentumflux_output_conversion(k+ki) * &
987	surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
988	!$ACC ATOMIC
989	sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
990	heatflux_output_conversion(k+ki) * &
991	surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
992	#if 0
993	sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
994	0.0_wp * rmask(j,i,sr) ! u"pt"
995	sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
996	0.0_wp * rmask(j,i,sr) ! v"pt"
997	#endif
998	#ifndef _OPENACC
999	IF ( ocean_mode ) THEN
1000	sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
1001	surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
1002	ENDIF
1003	IF ( humidity ) THEN
1004	sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
1005	waterflux_output_conversion(k+ki) * &
1006	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1007	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
1008	( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
1009	surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
1010	surf_def_h(l)%qsws(m) ) &
1011	* heatflux_output_conversion(k+ki)
1012	IF ( cloud_droplets ) THEN
1013	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
1014	( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
1015	ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
1016	0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
1017	* heatflux_output_conversion(k+ki)
1018	ENDIF
1019	IF ( bulk_cloud_model ) THEN
1020	!
1021	!-- Formula does not work if ql(k+ki) /= 0.0
1022	sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
1023	waterflux_output_conversion(k+ki) * &
1024	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1025	ENDIF
1026	ENDIF
1027	IF ( passive_scalar ) THEN
1028	sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
1029	surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
1030	ENDIF
1031	#endif
1032
1033	ENDDO
1034
1035	ENDIF
1036	ENDDO
1037	IF ( surf_lsm_h%end_index(j,i) >= &
1038	surf_lsm_h%start_index(j,i) ) THEN
1039	m = surf_lsm_h%start_index(j,i)
1040	!$ACC ATOMIC
1041	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
1042	momentumflux_output_conversion(nzb) * &
1043	surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
1044	!$ACC ATOMIC
1045	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
1046	momentumflux_output_conversion(nzb) * &
1047	surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
1048	!$ACC ATOMIC
1049	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
1050	heatflux_output_conversion(nzb) * &
1051	surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
1052	#if 0
1053	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
1054	0.0_wp * rmask(j,i,sr) ! u"pt"
1055	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
1056	0.0_wp * rmask(j,i,sr) ! v"pt"
1057	#endif
1058	#ifndef _OPENACC
1059	IF ( ocean_mode ) THEN
1060	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
1061	surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
1062	ENDIF
1063	IF ( humidity ) THEN
1064	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
1065	waterflux_output_conversion(nzb) * &
1066	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1067	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
1068	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
1069	surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
1070	surf_lsm_h%qsws(m) ) &
1071	* heatflux_output_conversion(nzb)
1072	IF ( cloud_droplets ) THEN
1073	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
1074	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
1075	ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
1076	0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
1077	* heatflux_output_conversion(nzb)
1078	ENDIF
1079	IF ( bulk_cloud_model ) THEN
1080	!
1081	!-- Formula does not work if ql(nzb) /= 0.0
1082	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
1083	waterflux_output_conversion(nzb) * &
1084	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1085	ENDIF
1086	ENDIF
1087	IF ( passive_scalar ) THEN
1088	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
1089	surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
1090	ENDIF
1091	#endif
1092
1093	ENDIF
1094	IF ( surf_usm_h%end_index(j,i) >= &
1095	surf_usm_h%start_index(j,i) ) THEN
1096	m = surf_usm_h%start_index(j,i)
1097	!$ACC ATOMIC
1098	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
1099	momentumflux_output_conversion(nzb) * &
1100	surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
1101	!$ACC ATOMIC
1102	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
1103	momentumflux_output_conversion(nzb) * &
1104	surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
1105	!$ACC ATOMIC
1106	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
1107	heatflux_output_conversion(nzb) * &
1108	surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
1109	#if 0
1110	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
1111	0.0_wp * rmask(j,i,sr) ! u"pt"
1112	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
1113	0.0_wp * rmask(j,i,sr) ! v"pt"
1114	#endif
1115	#ifndef _OPENACC
1116	IF ( ocean_mode ) THEN
1117	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
1118	surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
1119	ENDIF
1120	IF ( humidity ) THEN
1121	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
1122	waterflux_output_conversion(nzb) * &
1123	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1124	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
1125	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
1126	surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
1127	surf_usm_h%qsws(m) ) &
1128	* heatflux_output_conversion(nzb)
1129	IF ( cloud_droplets ) THEN
1130	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
1131	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
1132	ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
1133	0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
1134	* heatflux_output_conversion(nzb)
1135	ENDIF
1136	IF ( bulk_cloud_model ) THEN
1137	!
1138	!-- Formula does not work if ql(nzb) /= 0.0
1139	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
1140	waterflux_output_conversion(nzb) * &
1141	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1142	ENDIF
1143	ENDIF
1144	IF ( passive_scalar ) THEN
1145	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
1146	surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
1147	ENDIF
1148	#endif
1149
1150	ENDIF
1151
1152	ENDIF
1153
1154	#ifndef _OPENACC
1155	IF ( .NOT. neutral ) THEN
1156	IF ( surf_def_h(0)%end_index(j,i) >= &
1157	surf_def_h(0)%start_index(j,i) ) THEN
1158	m = surf_def_h(0)%start_index(j,i)
1159	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
1160	surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
1161	ENDIF
1162	IF ( surf_lsm_h%end_index(j,i) >= &
1163	surf_lsm_h%start_index(j,i) ) THEN
1164	m = surf_lsm_h%start_index(j,i)
1165	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
1166	surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
1167	ENDIF
1168	IF ( surf_usm_h%end_index(j,i) >= &
1169	surf_usm_h%start_index(j,i) ) THEN
1170	m = surf_usm_h%start_index(j,i)
1171	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
1172	surf_usm_h%ol(m) * rmask(j,i,sr) ! L
1173	ENDIF
1174	ENDIF
1175
1176	IF ( radiation ) THEN
1177	IF ( surf_def_h(0)%end_index(j,i) >= &
1178	surf_def_h(0)%start_index(j,i) ) THEN
1179	m = surf_def_h(0)%start_index(j,i)
1180	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
1181	surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
1182	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
1183	surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
1184	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
1185	surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
1186	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
1187	surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
1188	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
1189	surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
1190	ENDIF
1191	IF ( surf_lsm_h%end_index(j,i) >= &
1192	surf_lsm_h%start_index(j,i) ) THEN
1193	m = surf_lsm_h%start_index(j,i)
1194	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
1195	surf_lsm_h%rad_net(m) * rmask(j,i,sr)
1196	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
1197	surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
1198	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
1199	surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
1200	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
1201	surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
1202	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
1203	surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
1204	ENDIF
1205	IF ( surf_usm_h%end_index(j,i) >= &
1206	surf_usm_h%start_index(j,i) ) THEN
1207	m = surf_usm_h%start_index(j,i)
1208	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
1209	surf_usm_h%rad_net(m) * rmask(j,i,sr)
1210	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
1211	surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
1212	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
1213	surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
1214	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
1215	surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
1216	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
1217	surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
1218	ENDIF
1219
1220	#if defined ( __rrtmg )
1221	IF ( radiation_scheme == 'rrtmg' ) THEN
1222
1223	IF ( surf_def_h(0)%end_index(j,i) >= &
1224	surf_def_h(0)%start_index(j,i) ) THEN
1225	m = surf_def_h(0)%start_index(j,i)
1226	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
1227	surf_def_h(0)%rrtm_aldif(m,0) * rmask(j,i,sr)
1228	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
1229	surf_def_h(0)%rrtm_aldir(m,0) * rmask(j,i,sr)
1230	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
1231	surf_def_h(0)%rrtm_asdif(m,0) * rmask(j,i,sr)
1232	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
1233	surf_def_h(0)%rrtm_asdir(m,0) * rmask(j,i,sr)
1234	ENDIF
1235	IF ( surf_lsm_h%end_index(j,i) >= &
1236	surf_lsm_h%start_index(j,i) ) THEN
1237	m = surf_lsm_h%start_index(j,i)
1238	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
1239	SUM( surf_lsm_h%frac(m,:) * &
1240	surf_lsm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
1241	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
1242	SUM( surf_lsm_h%frac(m,:) * &
1243	surf_lsm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
1244	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
1245	SUM( surf_lsm_h%frac(m,:) * &
1246	surf_lsm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
1247	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
1248	SUM( surf_lsm_h%frac(m,:) * &
1249	surf_lsm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
1250	ENDIF
1251	IF ( surf_usm_h%end_index(j,i) >= &
1252	surf_usm_h%start_index(j,i) ) THEN
1253	m = surf_usm_h%start_index(j,i)
1254	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
1255	SUM( surf_usm_h%frac(m,:) * &
1256	surf_usm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
1257	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
1258	SUM( surf_usm_h%frac(m,:) * &
1259	surf_usm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
1260	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
1261	SUM( surf_usm_h%frac(m,:) * &
1262	surf_usm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
1263	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
1264	SUM( surf_usm_h%frac(m,:) * &
1265	surf_usm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
1266	ENDIF
1267
1268	ENDIF
1269	#endif
1270	ENDIF
1271	#endif
1272	!
1273	!-- Subgridscale fluxes at the top surface
1274	IF ( use_top_fluxes ) THEN
1275	m = surf_def_h(2)%start_index(j,i)
1276	!$ACC ATOMIC
1277	sums_l(nzt,12,tn) = sums_l(nzt,12,tn) + &
1278	momentumflux_output_conversion(nzt) * &
1279	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
1280	!$ACC ATOMIC
1281	sums_l(nzt+1,12,tn) = sums_l(nzt+1,12,tn) + &
1282	momentumflux_output_conversion(nzt+1) * &
1283	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
1284	!$ACC ATOMIC
1285	sums_l(nzt,14,tn) = sums_l(nzt,14,tn) + &
1286	momentumflux_output_conversion(nzt) * &
1287	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
1288	!$ACC ATOMIC
1289	sums_l(nzt+1,14,tn) = sums_l(nzt+1,14,tn) + &
1290	momentumflux_output_conversion(nzt+1) * &
1291	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
1292	!$ACC ATOMIC
1293	sums_l(nzt,16,tn) = sums_l(nzt,16,tn) + &
1294	heatflux_output_conversion(nzt) * &
1295	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
1296	!$ACC ATOMIC
1297	sums_l(nzt+1,16,tn) = sums_l(nzt+1,16,tn) + &
1298	heatflux_output_conversion(nzt+1) * &
1299	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
1300	#if 0
1301	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
1302	0.0_wp * rmask(j,i,sr) ! u"pt"
1303	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
1304	0.0_wp * rmask(j,i,sr) ! v"pt"
1305	#endif
1306	#ifndef _OPENACC
1307	IF ( ocean_mode ) THEN
1308	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
1309	surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
1310	ENDIF
1311	IF ( humidity ) THEN
1312	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
1313	waterflux_output_conversion(nzt) * &
1314	surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1315	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
1316	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
1317	surf_def_h(2)%shf(m) + &
1318	0.61_wp * pt(nzt,j,i) * &
1319	surf_def_h(2)%qsws(m) ) &
1320	* heatflux_output_conversion(nzt)
1321	IF ( cloud_droplets ) THEN
1322	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
1323	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
1324	ql(nzt,j,i) ) * &
1325	surf_def_h(2)%shf(m) + &
1326	0.61_wp * pt(nzt,j,i) * &
1327	surf_def_h(2)%qsws(m) )&
1328	* heatflux_output_conversion(nzt)
1329	ENDIF
1330	IF ( bulk_cloud_model ) THEN
1331	!
1332	!-- Formula does not work if ql(nzb) /= 0.0
1333	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
1334	waterflux_output_conversion(nzt) * &
1335	surf_def_h(2)%qsws(m) * rmask(j,i,sr)
1336	ENDIF
1337	ENDIF
1338	IF ( passive_scalar ) THEN
1339	sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
1340	surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
1341	ENDIF
1342	#endif
1343	ENDIF
1344
1345	!
1346	!-- Resolved fluxes (can be computed for all horizontal points)
1347	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
1348	!-- ---- speaking the following k-loop would have to be split up and
1349	!-- rearranged according to the staggered grid.
1350	DO k = nzb, nzt
1351	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
1352	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
1353	u(k+1,j,i) - hom(k+1,1,1,sr) )
1354	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
1355	v(k+1,j,i) - hom(k+1,1,2,sr) )
1356	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
1357	pt(k+1,j,i) - hom(k+1,1,4,sr) )
1358
1359	!-- Higher moments
1360	!$ACC ATOMIC
1361	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
1362	rmask(j,i,sr) * flag
1363	!$ACC ATOMIC
1364	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
1365	rmask(j,i,sr) * flag
1366
1367	!
1368	!-- Salinity flux and density (density does not belong to here,
1369	!-- but so far there is no other suitable place to calculate)
1370	#ifndef _OPENACC
1371	IF ( ocean_mode ) THEN
1372	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
1373	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
1374	sa(k+1,j,i) - hom(k+1,1,23,sr) )
1375	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
1376	rmask(j,i,sr) * flag
1377	ENDIF
1378	sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
1379	rmask(j,i,sr) * flag
1380	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
1381	rmask(j,i,sr) * flag
1382	ENDIF
1383
1384	!
1385	!-- Buoyancy flux, water flux, humidity flux, liquid water
1386	!-- content, rain drop concentration and rain water content
1387	IF ( humidity ) THEN
1388	IF ( bulk_cloud_model .OR. cloud_droplets ) THEN
1389	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
1390	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
1391	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
1392	rho_air_zw(k) * &
1393	heatflux_output_conversion(k) * &
1394	rmask(j,i,sr) * flag
1395	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
1396	* flag
1397
1398	IF ( .NOT. cloud_droplets ) THEN
1399	pts = 0.5_wp * &
1400	( ( q(k,j,i) - ql(k,j,i) ) - &
1401	hom(k,1,42,sr) + &
1402	( q(k+1,j,i) - ql(k+1,j,i) ) - &
1403	hom(k+1,1,42,sr) )
1404	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
1405	rho_air_zw(k) * &
1406	waterflux_output_conversion(k) * &
1407	rmask(j,i,sr) * &
1408	flag
1409	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
1410	rmask(j,i,sr) * &
1411	flag
1412	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
1413	rmask(j,i,sr) * &
1414	flag
1415	IF ( microphysics_morrison ) THEN
1416	sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
1417	rmask(j,i,sr) *&
1418	flag
1419	ENDIF
1420	IF ( microphysics_ice_extension ) THEN
1421	sums_l(k,124,tn) = sums_l(k,124,tn) + ni(k,j,i) * &
1422	rmask(j,i,sr) *&
1423	flag
1424	sums_l(k,125,tn) = sums_l(k,125,tn) + qi(k,j,i) * &
1425	rmask(j,i,sr) *&
1426	flag
1427	ENDIF
1428
1429	IF ( microphysics_seifert ) THEN
1430	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
1431	rmask(j,i,sr) *&
1432	flag
1433	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
1434	rmask(j,i,sr) *&
1435	flag
1436	ENDIF
1437	ENDIF
1438
1439	ELSE
1440	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
1441	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
1442	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
1443	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
1444	rho_air_zw(k) * &
1445	heatflux_output_conversion(k) * &
1446	rmask(j,i,sr) * &
1447	flag
1448	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
1449	sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
1450	hom(k,1,41,sr) ) * &
1451	sums_l(k,17,tn) + &
1452	0.61_wp * hom(k,1,4,sr) * &
1453	sums_l(k,49,tn) &
1454	) * heatflux_output_conversion(k) * &
1455	flag
1456	END IF
1457	END IF
1458	ENDIF
1459	!
1460	!-- Passive scalar flux
1461	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
1462	.OR. sr /= 0 ) ) THEN
1463	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
1464	s(k+1,j,i) - hom(k+1,1,115,sr) )
1465	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
1466	rmask(j,i,sr) * flag
1467	ENDIF
1468	#endif
1469
1470	!
1471	!-- Energy flux we
1472	!-- has to be adjusted
1473	!$ACC ATOMIC
1474	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
1475	( ust2 + vst2 + w(k,j,i)**2 ) &
1476	* rho_air_zw(k) &
1477	* momentumflux_output_conversion(k) &
1478	* rmask(j,i,sr) * flag
1479	ENDDO
1480	ENDDO
1481	ENDDO
1482	!$OMP END PARALLEL
1483
1484	!$ACC UPDATE &
1485	!$ACC HOST(sums_l(:,12,tn), sums_l(:,14,tn), sums_l(:,16,tn)) &
1486	!$ACC HOST(sums_l(:,35,tn), sums_l(:,36,tn), sums_l(:,37,tn))
1487	!
1488	!-- Treat land-surface quantities according to new wall model structure.
1489	IF ( land_surface ) THEN
1490	tn = 0
1491	!$OMP PARALLEL PRIVATE( i, j, m, tn )
1492	!$ tn = omp_get_thread_num()
1493	!$OMP DO
1494	DO m = 1, surf_lsm_h%ns
1495	i = surf_lsm_h%i(m)
1496	j = surf_lsm_h%j(m)
1497
1498	IF ( i >= nxl .AND. i <= nxr .AND. &
1499	j >= nys .AND. j <= nyn ) THEN
1500	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
1501	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
1502	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
1503	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
1504	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
1505	sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
1506	ENDIF
1507	ENDDO
1508	!$OMP END PARALLEL
1509
1510	tn = 0
1511	!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
1512	!$ tn = omp_get_thread_num()
1513	!$OMP DO
1514	DO m = 1, surf_lsm_h%ns
1515
1516	i = surf_lsm_h%i(m)
1517	j = surf_lsm_h%j(m)
1518
1519	IF ( i >= nxl .AND. i <= nxr .AND. &
1520	j >= nys .AND. j <= nyn ) THEN
1521
1522	DO k = nzb_soil, nzt_soil
1523	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
1524	* rmask(j,i,sr)
1525	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
1526	* rmask(j,i,sr)
1527	ENDDO
1528	ENDIF
1529	ENDDO
1530	!$OMP END PARALLEL
1531	ENDIF
1532	!
1533	!-- For speed optimization fluxes which have been computed in part directly
1534	!-- inside the WS advection routines are treated seperatly
1535	!-- Momentum fluxes first:
1536
1537	tn = 0
1538	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
1539	!$ tn = omp_get_thread_num()
1540	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
1541	!$OMP DO
1542	DO i = nxl, nxr
1543	DO j = nys, nyn
1544	DO k = nzb, nzt
1545	!
1546	!-- Flag 23 is used to mask surface fluxes as well as model-top
1547	!-- fluxes, which are added further below.
1548	flag = MERGE( 1.0_wp, 0.0_wp, &
1549	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
1550	MERGE( 1.0_wp, 0.0_wp, &
1551	BTEST( wall_flags_total_0(k,j,i), 9 ) )
1552
1553	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
1554	u(k+1,j,i) - hom(k+1,1,1,sr) )
1555	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
1556	v(k+1,j,i) - hom(k+1,1,2,sr) )
1557	!
1558	!-- Momentum flux wu
1559	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
1560	( w(k,j,i-1) + w(k,j,i) ) &
1561	* rho_air_zw(k) &
1562	* momentumflux_output_conversion(k) &
1563	* ust * rmask(j,i,sr) &
1564	* flag
1565	!
1566	!-- Momentum flux wv
1567	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
1568	( w(k,j-1,i) + w(k,j,i) ) &
1569	* rho_air_zw(k) &
1570	* momentumflux_output_conversion(k) &
1571	* vst * rmask(j,i,sr) &
1572	* flag
1573	ENDDO
1574	ENDDO
1575	ENDDO
1576
1577	ENDIF
1578	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
1579	!$OMP DO
1580	DO i = nxl, nxr
1581	DO j = nys, nyn
1582	DO k = nzb, nzt
1583	flag = MERGE( 1.0_wp, 0.0_wp, &
1584	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
1585	MERGE( 1.0_wp, 0.0_wp, &
1586	BTEST( wall_flags_total_0(k,j,i), 9 ) )
1587	!
1588	!-- Vertical heat flux
1589	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
1590	( pt(k,j,i) - hom(k,1,4,sr) + &
1591	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
1592	* rho_air_zw(k) &
1593	* heatflux_output_conversion(k) &
1594	* w(k,j,i) * rmask(j,i,sr) * flag
1595	IF ( humidity ) THEN
1596	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
1597	q(k+1,j,i) - hom(k+1,1,41,sr) )
1598	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
1599	rho_air_zw(k) * &
1600	waterflux_output_conversion(k) * &
1601	rmask(j,i,sr) * flag
1602	ENDIF
1603	IF ( passive_scalar ) THEN
1604	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
1605	s(k+1,j,i) - hom(k+1,1,115,sr) )
1606	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
1607	rmask(j,i,sr) * flag
1608	ENDIF
1609	ENDDO
1610	ENDDO
1611	ENDDO
1612
1613	ENDIF
1614
1615	!
1616	!-- Density at top follows Neumann condition
1617	IF ( ocean_mode ) THEN
1618	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
1619	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
1620	ENDIF
1621
1622	!
1623	!-- Divergence of vertical flux of resolved scale energy and pressure
1624	!-- fluctuations as well as flux of pressure fluctuation itself (68).
1625	!-- First calculate the products, then the divergence.
1626	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
1627	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
1628	THEN
1629	sums_ll = 0.0_wp ! local array
1630
1631	!$OMP DO
1632	DO i = nxl, nxr
1633	DO j = nys, nyn
1634	DO k = nzb+1, nzt
1635	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1636
1637	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
1638	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
1639	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
1640	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
1641	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
1642	+ w(k,j,i)*2 ) flag
1643
1644	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
1645	* ( ( p(k,j,i) + p(k+1,j,i) ) &
1646	/ momentumflux_output_conversion(k) ) &
1647	* flag
1648
1649	ENDDO
1650	ENDDO
1651	ENDDO
1652	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
1653	sums_ll(nzt+1,1) = 0.0_wp
1654	sums_ll(0,2) = 0.0_wp
1655	sums_ll(nzt+1,2) = 0.0_wp
1656
1657	DO k = nzb+1, nzt
1658	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
1659	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
1660	sums_l(k,68,tn) = sums_ll(k,2)
1661	ENDDO
1662	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
1663	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
1664	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
1665
1666	ENDIF
1667
1668	!
1669	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
1670	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
1671	THEN
1672	!$OMP DO
1673	DO i = nxl, nxr
1674	DO j = nys, nyn
1675	DO k = nzb+1, nzt
1676
1677	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1678
1679	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
1680	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
1681	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
1682	) * ddzw(k) &
1683	* flag
1684
1685	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
1686	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
1687	) * flag
1688
1689	ENDDO
1690	ENDDO
1691	ENDDO
1692	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
1693	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
1694
1695	ENDIF
1696
1697	!
1698	!-- Horizontal heat fluxes (subgrid, resolved, total).
1699	!-- Do it only, if profiles shall be plotted.
1700	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
1701
1702	!$OMP DO
1703	DO i = nxl, nxr
1704	DO j = nys, nyn
1705	DO k = nzb+1, nzt
1706	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1707	!
1708	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
1709	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
1710	( kh(k,j,i) + kh(k,j,i-1) ) &
1711	* ( pt(k,j,i-1) - pt(k,j,i) ) &
1712	* rho_air_zw(k) &
1713	* heatflux_output_conversion(k) &
1714	* ddx * rmask(j,i,sr) * flag
1715	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
1716	( kh(k,j,i) + kh(k,j-1,i) ) &
1717	* ( pt(k,j-1,i) - pt(k,j,i) ) &
1718	* rho_air_zw(k) &
1719	* heatflux_output_conversion(k) &
1720	* ddy * rmask(j,i,sr) * flag
1721	!
1722	!-- Resolved horizontal heat fluxes upt, vpt
1723	sums_l(k,59,tn) = sums_l(k,59,tn) + &
1724	( u(k,j,i) - hom(k,1,1,sr) ) &
1725	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
1726	pt(k,j,i) - hom(k,1,4,sr) ) &
1727	* heatflux_output_conversion(k) &
1728	* flag
1729	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
1730	pt(k,j,i) - hom(k,1,4,sr) )
1731	sums_l(k,62,tn) = sums_l(k,62,tn) + &
1732	( v(k,j,i) - hom(k,1,2,sr) ) &
1733	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
1734	pt(k,j,i) - hom(k,1,4,sr) ) &
1735	* heatflux_output_conversion(k) &
1736	* flag
1737	ENDDO
1738	ENDDO
1739	ENDDO
1740	!
1741	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
1742	sums_l(nzb,58,tn) = 0.0_wp
1743	sums_l(nzb,59,tn) = 0.0_wp
1744	sums_l(nzb,60,tn) = 0.0_wp
1745	sums_l(nzb,61,tn) = 0.0_wp
1746	sums_l(nzb,62,tn) = 0.0_wp
1747	sums_l(nzb,63,tn) = 0.0_wp
1748
1749	ENDIF
1750	!$OMP END PARALLEL
1751
1752	!
1753	!-- Collect current large scale advection and subsidence tendencies for
1754	!-- data output
1755	IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
1756	!
1757	!-- Interpolation in time of LSF_DATA
1758	nt = 1
1759	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
1760	nt = nt + 1
1761	ENDDO
1762	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
1763	nt = nt - 1
1764	ENDIF
1765
1766	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
1767	/ ( time_vert(nt+1)-time_vert(nt) )
1768
1769
1770	DO k = nzb, nzt
1771	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
1772	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
1773	sums_ls_l(k,1) = td_lsa_q(k,nt) &
1774	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
1775	ENDDO
1776
1777	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
1778	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
1779
1780	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
1781
1782	DO k = nzb, nzt
1783	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
1784	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
1785	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
1786	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
1787	ENDDO
1788
1789	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
1790	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
1791
1792	ENDIF
1793
1794	ENDIF
1795
1796	tn = 0
1797	!$OMP PARALLEL PRIVATE( i, j, k, tn )
1798	!$ tn = omp_get_thread_num()
1799	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
1800	!$OMP DO
1801	DO i = nxl, nxr
1802	DO j = nys, nyn
1803	DO k = nzb+1, nzt+1
1804	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1805
1806	sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
1807	* rmask(j,i,sr) * flag
1808	sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
1809	* rmask(j,i,sr) * flag
1810	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
1811	* rmask(j,i,sr) * flag
1812	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
1813	* rmask(j,i,sr) * flag
1814	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
1815	* rmask(j,i,sr) * flag
1816	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
1817	* rmask(j,i,sr) * flag
1818	sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
1819	* rmask(j,i,sr) * flag
1820	sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
1821	* rmask(j,i,sr) * flag
1822	ENDDO
1823	ENDDO
1824	ENDDO
1825	ENDIF
1826
1827	!
1828	!-- Calculate the profiles for all other modules
1829	CALL module_interface_statistics( 'profiles', sr, tn, dots_max )
1830	!$OMP END PARALLEL
1831
1832	!
1833	!-- Summation of thread sums
1834	IF ( threads_per_task > 1 ) THEN
1835	DO i = 1, threads_per_task-1
1836	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
1837	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
1838	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
1839	sums_l(:,45:pr_palm,i)
1840	IF ( max_pr_user > 0 ) THEN
1841	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
1842	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
1843	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
1844	ENDIF
1845
1846	IF ( air_chemistry ) THEN
1847	IF ( max_pr_cs > 0 ) THEN
1848	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+ max_pr_cs,0) = &
1849	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,0) + &
1850	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,i)
1851
1852	ENDIF
1853	ENDIF
1854	IF ( salsa ) THEN
1855	IF ( max_pr_cs > 0 ) THEN
1856	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) = &
1857	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) + &
1858	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,i)
1859
1860	ENDIF
1861	ENDIF
1862	ENDDO
1863	ENDIF
1864
1865	#if defined( __parallel )
1866
1867	!
1868	!-- Compute total sum from local sums
1869	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1870	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
1871	MPI_SUM, comm2d, ierr )
1872	IF ( large_scale_forcing ) THEN
1873	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
1874	MPI_REAL, MPI_SUM, comm2d, ierr )
1875	ENDIF
1876
1877	IF ( air_chemistry .AND. max_pr_cs > 0 ) THEN
1878	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1879	DO i = 1, max_pr_cs
1880	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+i,0), &
1881	sums(nzb,pr_palm+max_pr_user+i), &
1882	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
1883	ENDDO
1884	ENDIF
1885
1886	IF ( salsa .AND. max_pr_salsa > 0 ) THEN
1887	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1888	DO i = 1, max_pr_salsa
1889	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+max_pr_cs+i,0), &
1890	sums(nzb,pr_palm+max_pr_user+max_pr_user+i), &
1891	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
1892	ENDDO
1893	ENDIF
1894
1895	#else
1896	sums = sums_l(:,:,0)
1897	IF ( large_scale_forcing ) THEN
1898	sums(:,81:88) = sums_ls_l
1899	ENDIF
1900	#endif
1901
1902	!
1903	!-- Final values are obtained by division by the total number of grid points
1904	!-- used for summation. After that store profiles.
1905	!-- Check, if statistical regions do contain at least one grid point at the
1906	!-- respective k-level, otherwise division by zero will lead to undefined
1907	!-- values, which may cause e.g. problems with NetCDF output
1908	!-- Profiles:
1909	DO k = nzb, nzt+1
1910	sums(k,3) = sums(k,3) / ngp_2dh(sr)
1911	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
1912	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
1913	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
1914	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
1915	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
1916	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
1917	sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
1918	sums(k,114) = sums(k,114) / ngp_2dh(sr)
1919	sums(k,117) = sums(k,117) / ngp_2dh(sr)
1920	IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
1921	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
1922	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
1923	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
1924	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
1925	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
1926	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
1927	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
1928	sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
1929	sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
1930	sums(k,123:125) = sums(k,123:125) * ngp_2dh_s_inner(k,sr) / ngp_2dh(sr)
1931	ENDIF
1932	ENDDO
1933
1934	!-- u* and so on
1935	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
1936	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
1937	!-- above the topography, they are being divided by ngp_2dh(sr)
1938	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
1939	ngp_2dh(sr)
1940	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
1941	ngp_2dh(sr)
1942	sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
1943	ngp_2dh(sr)
1944	sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
1945	ngp_2dh(sr)
1946	!-- eges, e*
1947	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
1948	ngp_3d(sr)
1949	!-- Old and new divergence
1950	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
1951	ngp_3d_inner(sr)
1952
1953	!-- User-defined profiles
1954	IF ( max_pr_user > 0 ) THEN
1955	DO k = nzb, nzt+1
1956	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
1957	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
1958	ngp_2dh_s_inner(k,sr)
1959	ENDDO
1960	ENDIF
1961
1962	IF ( air_chemistry ) THEN
1963	IF ( max_pr_cs > 0 ) THEN
1964	DO k = nzb, nzt+1
1965	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) = &
1966	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) / &
1967	ngp_2dh_s_inner(k,sr)
1968	ENDDO
1969	ENDIF
1970	ENDIF
1971
1972	IF ( salsa ) THEN
1973	IF ( max_pr_salsa > 0 ) THEN
1974	DO k = nzb, nzt+1
1975	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) = &
1976	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) &
1977	/ ngp_2dh_s_inner(k,sr)
1978	ENDDO
1979	ENDIF
1980	ENDIF
1981
1982	!
1983	!-- Collect horizontal average in hom.
1984	!-- Compute deduced averages (e.g. total heat flux)
1985	hom(:,1,3,sr) = sums(:,3) ! w
1986	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
1987	hom(:,1,9,sr) = sums(:,9) ! km
1988	hom(:,1,10,sr) = sums(:,10) ! kh
1989	hom(:,1,11,sr) = sums(:,11) ! l
1990	hom(:,1,12,sr) = sums(:,12) ! w"u"
1991	hom(:,1,13,sr) = sums(:,13) ! wu
1992	hom(:,1,14,sr) = sums(:,14) ! w"v"
1993	hom(:,1,15,sr) = sums(:,15) ! wv
1994	hom(:,1,16,sr) = sums(:,16) ! w"pt"
1995	hom(:,1,17,sr) = sums(:,17) ! wpt
1996	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
1997	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
1998	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
1999	hom(:,1,21,sr) = sums(:,21) ! wptBC
2000	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
2001	! profile 24 is initial profile (sa)
2002	! profiles 25-29 left empty for initial
2003	! profiles
2004	hom(:,1,30,sr) = sums(:,30) ! u*2
2005	hom(:,1,31,sr) = sums(:,31) ! v*2
2006	hom(:,1,32,sr) = sums(:,32) ! w*2
2007	hom(:,1,33,sr) = sums(:,33) ! pt*2
2008	hom(:,1,34,sr) = sums(:,34) ! e*
2009	hom(:,1,35,sr) = sums(:,35) ! w2pt
2010	hom(:,1,36,sr) = sums(:,36) ! wpt2
2011	hom(:,1,37,sr) = sums(:,37) ! we
2012	hom(:,1,38,sr) = sums(:,38) ! w*3
2013	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
2014	hom(:,1,40,sr) = sums(:,40) ! p
2015	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
2016	hom(:,1,46,sr) = sums(:,46) ! wvpt
2017	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
2018	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
2019	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
2020	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
2021	hom(:,1,51,sr) = sums(:,51) ! w"qv"
2022	hom(:,1,52,sr) = sums(:,52) ! wqv
2023	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
2024	hom(:,1,54,sr) = sums(:,54) ! ql
2025	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
2026	hom(:,1,56,sr) = sums(:,56) ! wp/dz
2027	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
2028	hom(:,1,58,sr) = sums(:,58) ! u"pt"
2029	hom(:,1,59,sr) = sums(:,59) ! upt
2030	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
2031	hom(:,1,61,sr) = sums(:,61) ! v"pt"
2032	hom(:,1,62,sr) = sums(:,62) ! vpt
2033	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
2034	hom(:,1,64,sr) = sums(:,64) ! rho_ocean
2035	hom(:,1,65,sr) = sums(:,65) ! w"sa"
2036	hom(:,1,66,sr) = sums(:,66) ! wsa
2037	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
2038	hom(:,1,68,sr) = sums(:,68) ! wp
2039	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
2040	hom(:,1,70,sr) = sums(:,70) ! q*2
2041	hom(:,1,71,sr) = sums(:,71) ! prho
2042	hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
2043	hom(:,1,123,sr) = sums(:,123) ! nc
2044	hom(:,1,124,sr) = sums(:,124) ! ni
2045	hom(:,1,125,sr) = sums(:,125) ! qi
2046	hom(:,1,73,sr) = sums(:,73) ! nr
2047	hom(:,1,74,sr) = sums(:,74) ! qr
2048	hom(:,1,75,sr) = sums(:,75) ! qc
2049	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
2050	! 77 is initial density profile
2051	hom(:,1,78,sr) = ug ! ug
2052	hom(:,1,79,sr) = vg ! vg
2053	hom(:,1,80,sr) = w_subs ! w_subs
2054
2055	IF ( large_scale_forcing ) THEN
2056	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
2057	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
2058	IF ( use_subsidence_tendencies ) THEN
2059	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
2060	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
2061	ELSE
2062	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
2063	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
2064	ENDIF
2065	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
2066	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
2067	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
2068	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
2069	ENDIF
2070
2071	IF ( land_surface ) THEN
2072	hom(:,1,89,sr) = sums(:,89) ! t_soil
2073	! 90 is initial t_soil profile
2074	hom(:,1,91,sr) = sums(:,91) ! m_soil
2075	! 92 is initial m_soil profile
2076	hom(:,1,93,sr) = sums(:,93) ! ghf
2077	hom(:,1,94,sr) = sums(:,94) ! qsws_liq
2078	hom(:,1,95,sr) = sums(:,95) ! qsws_soil
2079	hom(:,1,96,sr) = sums(:,96) ! qsws_veg
2080	hom(:,1,97,sr) = sums(:,97) ! r_a
2081	hom(:,1,98,sr) = sums(:,98) ! r_s
2082
2083	ENDIF
2084
2085	IF ( radiation ) THEN
2086	hom(:,1,99,sr) = sums(:,99) ! rad_net
2087	hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
2088	hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
2089	hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
2090	hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
2091
2092	IF ( radiation_scheme == 'rrtmg' ) THEN
2093	hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
2094	hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
2095	hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
2096	hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
2097
2098	hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
2099	hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
2100	hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
2101	hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
2102	ENDIF
2103	ENDIF
2104
2105	hom(:,1,112,sr) = sums(:,112) !: L
2106
2107	IF ( passive_scalar ) THEN
2108	hom(:,1,117,sr) = sums(:,117) ! w"s"
2109	hom(:,1,114,sr) = sums(:,114) ! ws
2110	hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
2111	hom(:,1,116,sr) = sums(:,116) ! s*2
2112	ENDIF
2113
2114	hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
2115	hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
2116
2117	IF ( kolmogorov_length_scale ) THEN
2118	hom(:,1,121,sr) = sums(:,121) * 1E3_wp ! eta in mm
2119	ENDIF
2120
2121
2122	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
2123	! u, w'u', w'v', t (in last profile)
2124
2125	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
2126	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
2127	sums(:,pr_palm+1:pr_palm+max_pr_user)
2128	ENDIF
2129
2130	IF ( air_chemistry ) THEN
2131	IF ( max_pr_cs > 0 ) THEN ! chem_spcs profiles
2132	hom(:, 1, pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs, sr) = &
2133	sums(:, pr_palm+max_pr_user+1:pr_palm+max_pr_user+max_pr_cs)
2134	ENDIF
2135	ENDIF
2136
2137	IF ( salsa ) THEN
2138	IF ( max_pr_salsa > 0 ) THEN ! salsa profiles
2139	hom(:,1,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa, sr) = &
2140	sums(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa)
2141	ENDIF
2142	ENDIF
2143	!
2144	!-- Determine the boundary layer height using two different schemes.
2145	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
2146	!-- first relative minimum (maximum) of the total heat flux.
2147	!-- The corresponding height is assumed as the boundary layer height, if it
2148	!-- is less than 1.5 times the height where the heat flux becomes negative
2149	!-- (positive) for the first time. Attention: the resolved vertical sensible
2150	!-- heat flux (hom(:,1,17,sr) = wpt) is not known at the beginning because
2151	!-- the calculation happens in advec_s_ws which is called after
2152	!-- flow_statistics. Therefore z_i is directly taken from restart data at
2153	!-- the beginning of restart runs.
2154	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .OR. &
2155	simulated_time_at_begin /= simulated_time ) THEN
2156
2157	z_i(1) = 0.0_wp
2158	first = .TRUE.
2159
2160	IF ( ocean_mode ) THEN
2161	DO k = nzt, nzb+1, -1
2162	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
2163	first = .FALSE.
2164	height = zw(k)
2165	ENDIF
2166	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
2167	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
2168	IF ( zw(k) < 1.5_wp * height ) THEN
2169	z_i(1) = zw(k)
2170	ELSE
2171	z_i(1) = height
2172	ENDIF
2173	EXIT
2174	ENDIF
2175	ENDDO
2176	ELSE
2177	DO k = nzb, nzt-1
2178	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
2179	first = .FALSE.
2180	height = zw(k)
2181	ENDIF
2182	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
2183	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
2184	IF ( zw(k) < 1.5_wp * height ) THEN
2185	z_i(1) = zw(k)
2186	ELSE
2187	z_i(1) = height
2188	ENDIF
2189	EXIT
2190	ENDIF
2191	ENDDO
2192	ENDIF
2193
2194	!
2195	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
2196	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
2197	!-- maximal local temperature gradient: starting from the second (the
2198	!-- last but one) vertical gridpoint, the local gradient must be at least
2199	!-- 0.2K/100m and greater than the next four gradients.
2200	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
2201	!-- ocean case!
2202	z_i(2) = 0.0_wp
2203	DO k = nzb+1, nzt+1
2204	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
2205	ENDDO
2206	dptdz_threshold = 0.2_wp / 100.0_wp
2207
2208	IF ( ocean_mode ) THEN
2209	DO k = nzt+1, nzb+5, -1
2210	IF ( dptdz(k) > dptdz_threshold .AND. &
2211	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND.&
2212	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
2213	z_i(2) = zw(k-1)
2214	EXIT
2215	ENDIF
2216	ENDDO
2217	ELSE
2218	DO k = nzb+1, nzt-3
2219	IF ( dptdz(k) > dptdz_threshold .AND. &
2220	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND.&
2221	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
2222	z_i(2) = zw(k-1)
2223	EXIT
2224	ENDIF
2225	ENDDO
2226	ENDIF
2227
2228	ENDIF
2229
2230	hom(nzb+6,1,pr_palm,sr) = z_i(1)
2231	hom(nzb+7,1,pr_palm,sr) = z_i(2)
2232
2233	!
2234	!-- Determine vertical index which is nearest to the mean surface level
2235	!-- height of the respective statistic region
2236	DO k = nzb, nzt
2237	IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
2238	k_surface_level = k
2239	EXIT
2240	ENDIF
2241	ENDDO
2242
2243	!
2244	!-- Computation of both the characteristic vertical velocity and
2245	!-- the characteristic convective boundary layer temperature.
2246	!-- The inversion height entering into the equation is defined with respect
2247	!-- to the mean surface level height of the respective statistic region.
2248	!-- The horizontal average at surface level index + 1 is input for the
2249	!-- average temperature.
2250	IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
2251	THEN
2252	hom(nzb+8,1,pr_palm,sr) = &
2253	( g / hom(k_surface_level+1,1,4,sr) * &
2254	( hom(k_surface_level,1,18,sr) / &
2255	( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
2256	* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
2257	ELSE
2258	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
2259	ENDIF
2260
2261	!
2262	!-- Collect the time series quantities. Please note, timeseries quantities
2263	!-- which are collected from horizontally averaged profiles, e.g. wpt
2264	!-- or pt(zp), are treated specially. In case of elevated model surfaces,
2265	!-- index nzb+1 might be within topography and data will be zero. Therefore,
2266	!-- take value for the first atmosphere index, which is topo_min_level+1.
2267	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
2268	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
2269	ts_value(3,sr) = dt_3d
2270	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
2271	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
2272	ts_value(6,sr) = u_max
2273	ts_value(7,sr) = v_max
2274	ts_value(8,sr) = w_max
2275	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
2276	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
2277	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
2278	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
2279	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
2280	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
2281	ts_value(15,sr) = hom(topo_min_level+1,1,16,sr) ! w'pt' at k=1
2282	ts_value(16,sr) = hom(topo_min_level+1,1,18,sr) ! wpt at k=1
2283	ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
2284	ts_value(18,sr) = hom(topo_min_level+1,1,4,sr) ! pt(zp)
2285	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
2286	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
2287	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
2288
2289	IF ( .NOT. neutral ) THEN
2290	ts_value(22,sr) = hom(nzb,1,112,sr) ! L
2291	ELSE
2292	ts_value(22,sr) = 1.0E10_wp
2293	ENDIF
2294
2295	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
2296
2297	IF ( passive_scalar ) THEN
2298	ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
2299	ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
2300	ENDIF
2301
2302	!
2303	!-- Collect land surface model timeseries
2304	IF ( land_surface ) THEN
2305	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
2306	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
2307	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
2308	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
2309	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
2310	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
2311	ENDIF
2312	!
2313	!-- Collect radiation model timeseries
2314	IF ( radiation ) THEN
2315	ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
2316	ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
2317	ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
2318	ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
2319	ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
2320
2321	IF ( radiation_scheme == 'rrtmg' ) THEN
2322	ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
2323	ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
2324	ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
2325	ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
2326	ENDIF
2327
2328	ENDIF
2329
2330	!
2331	!-- Calculate additional statistics provided by other modules
2332	CALL module_interface_statistics( 'time_series', sr, 0, dots_max )
2333
2334	ENDDO ! loop of the subregions
2335
2336	!
2337	!-- If required, sum up horizontal averages for subsequent time averaging.
2338	!-- Do not sum, if flow statistics is called before the first initial time step.
2339	IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
2340	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
2341	hom_sum = hom_sum + hom(:,1,:,:)
2342	average_count_pr = average_count_pr + 1
2343	do_sum = .FALSE.
2344	ENDIF
2345
2346	!
2347	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
2348	!-- This flag is reset after each time step in time_integration.
2349	flow_statistics_called = .TRUE.
2350
2351	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
2352
2353
2354	END SUBROUTINE flow_statistics

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |