Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 4523

Last change on this file since 4523 was 4521, checked in by schwenkel, 5 years ago
add error number
Property svn:keywords set to `Id`
File size: 114.5 KB

Line
1	!> @file flow_statistics.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2020 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! ------------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: flow_statistics.f90 4521 2020-05-06 11:39:49Z eckhard $
27	! Rename variable
28	!
29	! 4502 2020-04-17 16:14:16Z schwenkel
30	! Implementation of ice microphysics
31	!
32	! 4472 2020-03-24 12:21:00Z Giersch
33	! Calculations of the Kolmogorov lengt scale eta implemented
34	!
35	! 4464 2020-03-17 11:08:46Z Giersch
36	! Reset last change (r4463)
37	!
38	! 4463 2020-03-17 09:27:36Z Giersch
39	! Calculate horizontally averaged profiles of all velocity components at the
40	! same place
41	!
42	! 4444 2020-03-05 15:59:50Z raasch
43	! bugfix: cpp-directives for serial mode added
44	!
45	! 4442 2020-03-04 19:21:13Z suehring
46	! Change order of dimension in surface array %frac to allow for better
47	! vectorization.
48	!
49	! 4441 2020-03-04 19:20:35Z suehring
50	! Introduction of wall_flags_total_0, which currently sets bits based on static
51	! topography information used in wall_flags_static_0
52	!
53	! 4329 2019-12-10 15:46:36Z motisi
54	! Renamed wall_flags_0 to wall_flags_static_0
55	!
56	! 4182 2019-08-22 15:20:23Z scharf
57	! Corrected "Former revisions" section
58	!
59	! 4131 2019-08-02 11:06:18Z monakurppa
60	! Allow profile output for salsa variables.
61	!
62	! 4039 2019-06-18 10:32:41Z suehring
63	! Correct conversion to kinematic scalar fluxes in case of pw-scheme and
64	! statistic regions
65	!
66	! 3828 2019-03-27 19:36:23Z raasch
67	! unused variables removed
68	!
69	! 3676 2019-01-16 15:07:05Z knoop
70	! Bugfix, terminate OMP Parallel block
71	!
72	! Revision 1.1 1997/08/11 06:15:17 raasch
73	! Initial revision
74	!
75	!
76	! Description:
77	! ------------
78	!> Compute average profiles and further average flow quantities for the different
79	!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
80	!>
81	!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
82	!> lower vertical index for k-loops for all variables, although strictly
83	!> speaking the k-loops would have to be split up according to the staggered
84	!> grid. However, this implies no error since staggered velocity components
85	!> are zero at the walls and inside buildings.
86	!------------------------------------------------------------------------------!
87	SUBROUTINE flow_statistics
88
89
90	USE arrays_3d, &
91	ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
92	momentumflux_output_conversion, nc, ni, nr, p, prho, prr, pt, q,&
93	qc, qi, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
94	sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, &
95	zw, d_exner
96
97	USE basic_constants_and_equations_mod, &
98	ONLY: g, lv_d_cp
99
100	USE bulk_cloud_model_mod, &
101	ONLY: bulk_cloud_model, microphysics_morrison, microphysics_seifert, &
102	microphysics_ice_phase
103
104	USE chem_modules, &
105	ONLY: max_pr_cs
106
107	USE control_parameters, &
108	ONLY: air_chemistry, average_count_pr, cloud_droplets, do_sum, &
109	dt_3d, humidity, initializing_actions, kolmogorov_length_scale,&
110	land_surface, large_scale_forcing, large_scale_subsidence, &
111	max_pr_user, message_string, neutral, ocean_mode, &
112	passive_scalar, simulated_time, simulated_time_at_begin, &
113	use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
114	ws_scheme_mom, ws_scheme_sca, salsa, max_pr_salsa
115
116	USE cpulog, &
117	ONLY: cpu_log, log_point
118
119	USE grid_variables, &
120	ONLY: ddx, ddy
121
122	USE indices, &
123	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, nxl, nxr, nyn, &
124	nys, nzb, nzt, topo_min_level, wall_flags_total_0
125
126	#if defined( __parallel )
127	USE indices, &
128	ONLY: ngp_sums, ngp_sums_ls
129	#endif
130
131	USE kinds
132
133	USE land_surface_model_mod, &
134	ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
135
136	USE lsf_nudging_mod, &
137	ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
138
139	USE module_interface, &
140	ONLY: module_interface_statistics
141
142	USE netcdf_interface, &
143	ONLY: dots_rad, dots_soil, dots_max
144
145	USE pegrid
146
147	USE radiation_model_mod, &
148	ONLY: radiation, radiation_scheme, &
149	rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
150	rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
151
152	USE statistics
153
154	USE surface_mod, &
155	ONLY : surf_def_h, surf_lsm_h, surf_usm_h
156
157
158	IMPLICIT NONE
159
160	INTEGER(iwp) :: i !<
161	INTEGER(iwp) :: j !<
162	INTEGER(iwp) :: k !<
163	INTEGER(iwp) :: ki !<
164	INTEGER(iwp) :: k_surface_level !<
165	INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
166	INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
167	INTEGER(iwp) :: nt !<
168	!$ INTEGER(iwp) :: omp_get_thread_num !<
169	INTEGER(iwp) :: sr !<
170	INTEGER(iwp) :: tn !<
171
172	LOGICAL :: first !<
173
174	REAL(wp) :: dissipation !< dissipation rate
175	REAL(wp) :: dptdz_threshold !<
176	REAL(wp) :: du_dx !< Derivative of u fluctuations with respect to x
177	REAL(wp) :: du_dy !< Derivative of u fluctuations with respect to y
178	REAL(wp) :: du_dz !< Derivative of u fluctuations with respect to z
179	REAL(wp) :: dv_dx !< Derivative of v fluctuations with respect to x
180	REAL(wp) :: dv_dy !< Derivative of v fluctuations with respect to y
181	REAL(wp) :: dv_dz !< Derivative of v fluctuations with respect to z
182	REAL(wp) :: dw_dx !< Derivative of w fluctuations with respect to x
183	REAL(wp) :: dw_dy !< Derivative of w fluctuations with respect to y
184	REAL(wp) :: dw_dz !< Derivative of w fluctuations with respect to z
185	REAL(wp) :: eta !< Kolmogorov length scale
186	REAL(wp) :: fac !<
187	REAL(wp) :: flag !<
188	REAL(wp) :: height !<
189	REAL(wp) :: pts !<
190	REAL(wp) :: s11 !< fluctuating rate-of-strain tensor component 11
191	REAL(wp) :: s21 !< fluctuating rate-of-strain tensor component 21
192	REAL(wp) :: s31 !< fluctuating rate-of-strain tensor component 31
193	REAL(wp) :: s12 !< fluctuating rate-of-strain tensor component 12
194	REAL(wp) :: s22 !< fluctuating rate-of-strain tensor component 22
195	REAL(wp) :: s32 !< fluctuating rate-of-strain tensor component 32
196	REAL(wp) :: s13 !< fluctuating rate-of-strain tensor component 13
197	REAL(wp) :: s23 !< fluctuating rate-of-strain tensor component 23
198	REAL(wp) :: s33 !< fluctuating rate-of-strain tensor component 33
199	REAL(wp) :: sums_l_etot !<
200	REAL(wp) :: ust !<
201	REAL(wp) :: ust2 !<
202	REAL(wp) :: u2 !<
203	REAL(wp) :: vst !<
204	REAL(wp) :: vst2 !<
205	REAL(wp) :: v2 !<
206	REAL(wp) :: w2 !<
207
208	REAL(wp) :: dptdz(nzb+1:nzt+1) !<
209	REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
210
211	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
212
213
214	!
215	!-- To be on the safe side, check whether flow_statistics has already been
216	!-- called once after the current time step
217	IF ( flow_statistics_called ) THEN
218
219	message_string = 'flow_statistics is called two times within one ' // &
220	'timestep'
221	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
222
223	ENDIF
224
225	!
226	!-- Compute statistics for each (sub-)region
227	DO sr = 0, statistic_regions
228
229	!
230	!-- Initialize (local) summation array
231	sums_l = 0.0_wp
232	#ifdef _OPENACC
233	!$ACC KERNELS PRESENT(sums_l)
234	sums_l = 0.0_wp
235	!$ACC END KERNELS
236	#endif
237
238	!
239	!-- Store sums that have been computed in other subroutines in summation
240	!-- array
241	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
242	!-- WARNING: next line still has to be adjusted for OpenMP
243	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
244	heatflux_output_conversion ! heat flux from advec_s_bc
245	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
246	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
247
248	!
249	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
250	!-- scale) vertical fluxes and velocity variances by using commonly-
251	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
252	!-- in combination with the 5th order advection scheme, pronounced
253	!-- artificial kinks could be observed in the vertical profiles near the
254	!-- surface. Please note: these kinks were not related to the model truth,
255	!-- i.e. these kinks are just related to an evaluation problem.
256	!-- In order avoid these kinks, vertical fluxes and horizontal as well
257	!-- vertical velocity variances are calculated directly within the advection
258	!-- routines, according to the numerical discretization, to evaluate the
259	!-- statistical quantities as they will appear within the prognostic
260	!-- equations.
261	!-- Copy the turbulent quantities, evaluated in the advection routines to
262	!-- the local array sums_l() for further computations.
263	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
264
265	!
266	!-- According to the Neumann bc for the horizontal velocity components,
267	!-- the corresponding fluxes has to satisfiy the same bc.
268	IF ( ocean_mode ) THEN
269	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
270	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
271	ENDIF
272
273	DO i = 0, threads_per_task-1
274	!
275	!-- Swap the turbulent quantities evaluated in advec_ws.
276	sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
277	* momentumflux_output_conversion ! wu
278	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
279	* momentumflux_output_conversion ! wv
280	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
281	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
282	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
283	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
284	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
285	sums_ws2_ws_l(:,i) ) ! e*
286	ENDDO
287
288	ENDIF
289
290	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
291
292	DO i = 0, threads_per_task-1
293	sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
294	* heatflux_output_conversion ! wpt
295	IF ( ocean_mode ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
296	IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
297	* waterflux_output_conversion ! wq
298	IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! ws
299	ENDDO
300
301	ENDIF
302	!
303	!-- Horizontally averaged profiles of horizontal velocities and temperature.
304	!-- They must have been computed before, because they are already required
305	!-- for other horizontal averages.
306	tn = 0
307	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
308	!$ tn = omp_get_thread_num()
309	!$OMP DO
310	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag) &
311	!$ACC PRESENT(wall_flags_total_0, u, v, pt, rmask, sums_l)
312	DO i = nxl, nxr
313	DO j = nys, nyn
314	DO k = nzb, nzt+1
315	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
316	!$ACC ATOMIC
317	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
318	* flag
319	!$ACC ATOMIC
320	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
321	* flag
322	!$ACC ATOMIC
323	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
324	* flag
325	ENDDO
326	ENDDO
327	ENDDO
328	!$ACC UPDATE HOST(sums_l(:,1,tn), sums_l(:,2,tn), sums_l(:,4,tn))
329
330	!
331	!-- Horizontally averaged profile of salinity
332	IF ( ocean_mode ) THEN
333	!$OMP DO
334	DO i = nxl, nxr
335	DO j = nys, nyn
336	DO k = nzb, nzt+1
337	sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
338	* rmask(j,i,sr) &
339	* MERGE( 1.0_wp, 0.0_wp, &
340	BTEST( wall_flags_total_0(k,j,i), 22 ) )
341	ENDDO
342	ENDDO
343	ENDDO
344	ENDIF
345
346	!
347	!-- Horizontally averaged profiles of virtual potential temperature,
348	!-- total water content, water vapor mixing ratio and liquid water potential
349	!-- temperature
350	IF ( humidity ) THEN
351	!$OMP DO
352	DO i = nxl, nxr
353	DO j = nys, nyn
354	DO k = nzb, nzt+1
355	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
356	sums_l(k,44,tn) = sums_l(k,44,tn) + &
357	vpt(k,j,i) * rmask(j,i,sr) * flag
358	sums_l(k,41,tn) = sums_l(k,41,tn) + &
359	q(k,j,i) * rmask(j,i,sr) * flag
360	ENDDO
361	ENDDO
362	ENDDO
363	IF ( bulk_cloud_model ) THEN
364	!$OMP DO
365	DO i = nxl, nxr
366	DO j = nys, nyn
367	DO k = nzb, nzt+1
368	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
369	sums_l(k,42,tn) = sums_l(k,42,tn) + &
370	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
371	* flag
372	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
373	pt(k,j,i) + lv_d_cp * d_exner(k) * ql(k,j,i) &
374	) * rmask(j,i,sr) &
375	* flag
376	ENDDO
377	ENDDO
378	ENDDO
379	ENDIF
380	ENDIF
381
382	!
383	!-- Horizontally averaged profiles of passive scalar
384	IF ( passive_scalar ) THEN
385	!$OMP DO
386	DO i = nxl, nxr
387	DO j = nys, nyn
388	DO k = nzb, nzt+1
389	sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
390	* rmask(j,i,sr) &
391	* MERGE( 1.0_wp, 0.0_wp, &
392	BTEST( wall_flags_total_0(k,j,i), 22 ) )
393	ENDDO
394	ENDDO
395	ENDDO
396	ENDIF
397	!$OMP END PARALLEL
398	!
399	!-- Summation of thread sums
400	IF ( threads_per_task > 1 ) THEN
401	DO i = 1, threads_per_task-1
402	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
403	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
404	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
405	IF ( ocean_mode ) THEN
406	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
407	ENDIF
408	IF ( humidity ) THEN
409	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
410	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
411	IF ( bulk_cloud_model ) THEN
412	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
413	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
414	ENDIF
415	ENDIF
416	IF ( passive_scalar ) THEN
417	sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
418	ENDIF
419	ENDDO
420	ENDIF
421
422	#if defined( __parallel )
423	!
424	!-- Compute total sum from local sums
425	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
426	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
427	MPI_SUM, comm2d, ierr )
428	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
429	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
430	MPI_SUM, comm2d, ierr )
431	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
432	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
433	MPI_SUM, comm2d, ierr )
434	IF ( ocean_mode ) THEN
435	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
436	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
437	MPI_REAL, MPI_SUM, comm2d, ierr )
438	ENDIF
439	IF ( humidity ) THEN
440	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
441	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
442	MPI_REAL, MPI_SUM, comm2d, ierr )
443	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
444	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
445	MPI_REAL, MPI_SUM, comm2d, ierr )
446	IF ( bulk_cloud_model ) THEN
447	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
448	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
449	MPI_REAL, MPI_SUM, comm2d, ierr )
450	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
451	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
452	MPI_REAL, MPI_SUM, comm2d, ierr )
453	ENDIF
454	ENDIF
455
456	IF ( passive_scalar ) THEN
457	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
458	CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
459	MPI_REAL, MPI_SUM, comm2d, ierr )
460	ENDIF
461	#else
462	sums(:,1) = sums_l(:,1,0)
463	sums(:,2) = sums_l(:,2,0)
464	sums(:,4) = sums_l(:,4,0)
465	IF ( ocean_mode ) sums(:,23) = sums_l(:,23,0)
466	IF ( humidity ) THEN
467	sums(:,44) = sums_l(:,44,0)
468	sums(:,41) = sums_l(:,41,0)
469	IF ( bulk_cloud_model ) THEN
470	sums(:,42) = sums_l(:,42,0)
471	sums(:,43) = sums_l(:,43,0)
472	ENDIF
473	ENDIF
474	IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
475	#endif
476
477	!
478	!-- Final values are obtained by division by the total number of grid points
479	!-- used for summation. After that store profiles.
480	sums(:,1) = sums(:,1) / ngp_2dh(sr)
481	sums(:,2) = sums(:,2) / ngp_2dh(sr)
482	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
483	hom(:,1,1,sr) = sums(:,1) ! u
484	hom(:,1,2,sr) = sums(:,2) ! v
485	hom(:,1,4,sr) = sums(:,4) ! pt
486	!$ACC UPDATE DEVICE(hom(:,1,1,sr), hom(:,1,2,sr), hom(:,1,4,sr))
487
488
489	!
490	!-- Salinity
491	IF ( ocean_mode ) THEN
492	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
493	hom(:,1,23,sr) = sums(:,23) ! sa
494	ENDIF
495
496	!
497	!-- Humidity and cloud parameters
498	IF ( humidity ) THEN
499	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
500	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
501	hom(:,1,44,sr) = sums(:,44) ! vpt
502	hom(:,1,41,sr) = sums(:,41) ! qv (q)
503	IF ( bulk_cloud_model ) THEN
504	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
505	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
506	hom(:,1,42,sr) = sums(:,42) ! qv
507	hom(:,1,43,sr) = sums(:,43) ! pt
508	ENDIF
509	ENDIF
510
511	!
512	!-- Passive scalar
513	IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
514	ngp_2dh_s_inner(:,sr) ! s
515
516	!
517	!-- Horizontally averaged profiles of the remaining prognostic variables,
518	!-- variances, the total and the perturbation energy (single values in last
519	!-- column of sums_l) and some diagnostic quantities.
520	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
521	!-- ---- speaking the following k-loop would have to be split up and
522	!-- rearranged according to the staggered grid.
523	!-- However, this implies no error since staggered velocity components
524	!-- are zero at the walls and inside buildings.
525	tn = 0
526	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, &
527	!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
528	!$OMP w2, flag, m, ki, l )
529	!$ tn = omp_get_thread_num()
530	!$OMP DO
531	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, m) &
532	!$ACC PRIVATE(sums_l_etot, flag, du_dx, du_dy, du_dz) &
533	!$ACC PRIVATE(dv_dx, dv_dy, dv_dz, dw_dx, dw_dy, dw_dz) &
534	!$ACC PRIVATE(s11, s21, s31, s12, s22, s32, s13, s23, s33) &
535	!$ACC PRIVATE(dissipation, eta) &
536	!$ACC PRESENT(wall_flags_total_0, rmask, momentumflux_output_conversion) &
537	!$ACC PRESENT(hom(:,1,1:2,sr), hom(:,1,4,sr)) &
538	!$ACC PRESENT(e, u, v, w, km, kh, p, pt) &
539	!$ACC PRESENT(ddx, ddy, ddzu, ddzw) &
540	!$ACC PRESENT(surf_def_h(0), surf_lsm_h, surf_usm_h) &
541	!$ACC PRESENT(sums_l)
542	DO i = nxl, nxr
543	DO j = nys, nyn
544	sums_l_etot = 0.0_wp
545	DO k = nzb, nzt+1
546	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
547	!
548	!-- Prognostic and diagnostic variables
549	!$ACC ATOMIC
550	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
551	* flag
552	!$ACC ATOMIC
553	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
554	* flag
555	!$ACC ATOMIC
556	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
557	* flag
558	!$ACC ATOMIC
559	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
560	* flag
561	!$ACC ATOMIC
562	sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
563	/ momentumflux_output_conversion(k) ) &
564	* flag
565
566	!$ACC ATOMIC
567	sums_l(k,33,tn) = sums_l(k,33,tn) + &
568	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)&
569	* flag
570	#ifndef _OPENACC
571	IF ( humidity ) THEN
572	sums_l(k,70,tn) = sums_l(k,70,tn) + &
573	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)&
574	* flag
575	ENDIF
576	IF ( passive_scalar ) THEN
577	sums_l(k,116,tn) = sums_l(k,116,tn) + &
578	( s(k,j,i)-hom(k,1,115,sr) )*2 rmask(j,i,sr)&
579	* flag
580	ENDIF
581	#endif
582	!
583	!-- Higher moments
584	!-- (Computation of the skewness of w further below)
585	!$ACC ATOMIC
586	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr) &
587	* flag
588
589	sums_l_etot = sums_l_etot + &
590	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
591	w(k,j,i)*2 ) rmask(j,i,sr)&
592	* flag
593
594	!
595	!-- Computation of the Kolmogorov length scale. Calculation is based
596	!-- on gradients of the deviations from the horizontal mean.
597	!-- Kolmogorov scale at the boundaries (k=0/z=0m and k=nzt+1) is set to zero.
598	IF ( kolmogorov_length_scale .AND. k /= nzb .AND. k /= nzt+1) THEN
599	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
600
601	!
602	!-- Calculate components of the fluctuating rate-of-strain tensor
603	!-- (0.5*(del u'_i/del x_j + del u'_j/del x_i)) defined in the
604	!-- center of each grid box.
605	du_dx = ( ( u(k,j,i+1) - hom(k,1,1,sr) ) - &
606	( u(k,j,i) - hom(k,1,1,sr) ) ) * ddx
607	du_dy = 0.25_wp * ddy * &
608	( ( u(k,j+1,i) - hom(k,1,1,sr) ) - &
609	( u(k,j-1,i) - hom(k,1,1,sr) ) + &
610	( u(k,j+1,i+1) - hom(k,1,1,sr) ) - &
611	( u(k,j-1,i+1) - hom(k,1,1,sr) ) )
612	du_dz = 0.25_wp * ( ( ( u(k+1,j,i) - hom(k+1,1,1,sr) ) - &
613	( u(k,j,i) - hom(k,1,1,sr) ) ) * &
614	ddzu(k+1) + &
615	( ( u(k,j,i) - hom(k,1,1,sr) ) - &
616	( u(k-1,j,i) - hom(k-1,1,1,sr) ) )* &
617	ddzu(k) + &
618	( ( u(k+1,j,i+1) - hom(k+1,1,1,sr) )- &
619	( u(k,j,i+1) - hom(k,1,1,sr) ) ) * &
620	ddzu(k+1) + &
621	( ( u(k,j,i+1) - hom(k,1,1,sr) ) - &
622	( u(k-1,j,i+1) - hom(k-1,1,1,sr) ) ) *&
623	ddzu(k) )
624
625	dv_dx = 0.25_wp * ddx * &
626	( ( v(k,j,i+1) - hom(k,1,2,sr) ) - &
627	( v(k,j,i-1) - hom(k,1,2,sr) ) + &
628	( v(k,j+1,i+1) - hom(k,1,2,sr) ) - &
629	( v(k,j+1,i-1) - hom(k,1,2,sr) ) )
630	dv_dy = ( ( v(k,j+1,i) - hom(k,1,2,sr) ) - &
631	( v(k,j,i) - hom(k,1,2,sr) ) ) * ddy
632	dv_dz = 0.25_wp * ( ( ( v(k+1,j,i) - hom(k+1,1,2,sr) ) - &
633	( v(k,j,i) - hom(k,1,2,sr) ) ) * &
634	ddzu(k+1) + &
635	( ( v(k,j,i) - hom(k,1,2,sr) ) - &
636	( v(k-1,j,i) - hom(k-1,1,2,sr) ) ) * &
637	ddzu(k) + &
638	( ( v(k+1,j+1,i) - hom(k+1,1,2,sr) ) - &
639	( v(k,j+1,i) - hom(k,1,2,sr) ) ) * &
640	ddzu(k+1) + &
641	( ( v(k,j+1,i) - hom(k,1,2,sr) ) - &
642	( v(k-1,j+1,i) - hom(k-1,1,2,sr) ) ) *&
643	ddzu(k) )
644
645	dw_dx = 0.25_wp * ddx * ( w(k,j,i+1) - w(k,j,i-1) + &
646	w(k-1,j,i+1) - w(k-1,j,i-1) )
647	dw_dy = 0.25_wp * ddy * ( w(k,j+1,i) - w(k,j-1,i) + &
648	w(k-1,j+1,i) - w(k-1,j-1,i) )
649	dw_dz = ( w(k,j,i) - w(k-1,j,i) ) * ddzw(k)
650
651	s11 = 0.5_wp * ( du_dx + du_dx )
652	s21 = 0.5_wp * ( dv_dx + du_dy )
653	s31 = 0.5_wp * ( dw_dx + du_dz )
654
655	s12 = s21
656	s22 = 0.5 * ( dv_dy + dv_dy )
657	s32 = 0.5 * ( dw_dy + dv_dz )
658
659	s13 = s31
660	s23 = s32
661	s33 = 0.5_wp * ( dw_dz + dw_dz )
662
663	!-- Calculate 3D instantaneous energy dissipation rate after
664	!-- Pope (2000): Turbulent flows, p.259. It is defined in the center
665	!-- of each grid volume.
666	dissipation = 2.0_wp * km(k,j,i) * &
667	( s11s11 + s21s21 + s31*s31 + &
668	s12s12 + s22s22 + s32*s32 + &
669	s13s13 + s23s23 + s33*s33 )
670	eta = ( km(k,j,i)3.0_wp / ( dissipation+1.0E-12 ) )(1.0_wp/4.0_wp)
671
672	!$ACC ATOMIC
673	sums_l(k,121,tn) = sums_l(k,121,tn) + eta * rmask(j,i,sr) &
674	* flag
675
676
677	ENDIF !Kolmogorov length scale
678
679	ENDDO !k-loop
680	!
681	!-- Total and perturbation energy for the total domain (being
682	!-- collected in the last column of sums_l). Summation of these
683	!-- quantities is seperated from the previous loop in order to
684	!-- allow vectorization of that loop.
685	!$ACC ATOMIC
686	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
687	!
688	!-- 2D-arrays (being collected in the last column of sums_l)
689	IF ( surf_def_h(0)%end_index(j,i) >= &
690	surf_def_h(0)%start_index(j,i) ) THEN
691	m = surf_def_h(0)%start_index(j,i)
692	!$ACC ATOMIC
693	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
694	surf_def_h(0)%us(m) * rmask(j,i,sr)
695	!$ACC ATOMIC
696	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
697	surf_def_h(0)%usws(m) * rmask(j,i,sr)
698	!$ACC ATOMIC
699	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
700	surf_def_h(0)%vsws(m) * rmask(j,i,sr)
701	!$ACC ATOMIC
702	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
703	surf_def_h(0)%ts(m) * rmask(j,i,sr)
704	#ifndef _OPENACC
705	IF ( humidity ) THEN
706	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
707	surf_def_h(0)%qs(m) * rmask(j,i,sr)
708	ENDIF
709	IF ( passive_scalar ) THEN
710	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
711	surf_def_h(0)%ss(m) * rmask(j,i,sr)
712	ENDIF
713	#endif
714	!
715	!-- Summation of surface temperature.
716	!$ACC ATOMIC
717	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
718	surf_def_h(0)%pt_surface(m) * &
719	rmask(j,i,sr)
720	ENDIF
721	IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
722	m = surf_lsm_h%start_index(j,i)
723	!$ACC ATOMIC
724	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
725	surf_lsm_h%us(m) * rmask(j,i,sr)
726	!$ACC ATOMIC
727	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
728	surf_lsm_h%usws(m) * rmask(j,i,sr)
729	!$ACC ATOMIC
730	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
731	surf_lsm_h%vsws(m) * rmask(j,i,sr)
732	!$ACC ATOMIC
733	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
734	surf_lsm_h%ts(m) * rmask(j,i,sr)
735	#ifndef _OPENACC
736	IF ( humidity ) THEN
737	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
738	surf_lsm_h%qs(m) * rmask(j,i,sr)
739	ENDIF
740	IF ( passive_scalar ) THEN
741	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
742	surf_lsm_h%ss(m) * rmask(j,i,sr)
743	ENDIF
744	#endif
745	!
746	!-- Summation of surface temperature.
747	!$ACC ATOMIC
748	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
749	surf_lsm_h%pt_surface(m) * &
750	rmask(j,i,sr)
751	ENDIF
752	IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
753	m = surf_usm_h%start_index(j,i)
754	!$ACC ATOMIC
755	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
756	surf_usm_h%us(m) * rmask(j,i,sr)
757	!$ACC ATOMIC
758	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
759	surf_usm_h%usws(m) * rmask(j,i,sr)
760	!$ACC ATOMIC
761	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
762	surf_usm_h%vsws(m) * rmask(j,i,sr)
763	!$ACC ATOMIC
764	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
765	surf_usm_h%ts(m) * rmask(j,i,sr)
766	#ifndef _OPENACC
767	IF ( humidity ) THEN
768	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
769	surf_usm_h%qs(m) * rmask(j,i,sr)
770	ENDIF
771	IF ( passive_scalar ) THEN
772	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
773	surf_usm_h%ss(m) * rmask(j,i,sr)
774	ENDIF
775	#endif
776	!
777	!-- Summation of surface temperature.
778	!$ACC ATOMIC
779	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
780	surf_usm_h%pt_surface(m) * &
781	rmask(j,i,sr)
782	ENDIF
783	ENDDO !j-loop
784	ENDDO !i-loop
785	!$ACC UPDATE &
786	!$ACC HOST(sums_l(:,3,tn), sums_l(:,8,tn), sums_l(:,9,tn)) &
787	!$ACC HOST(sums_l(:,10,tn), sums_l(:,40,tn), sums_l(:,33,tn)) &
788	!$ACC HOST(sums_l(:,38,tn), sums_l(:,121,tn)) &
789	!$ACC HOST(sums_l(nzb:nzb+4,pr_palm,tn), sums_l(nzb+14:nzb+14,pr_palm,tn))
790
791	!
792	!-- Computation of statistics when ws-scheme is not used. Else these
793	!-- quantities are evaluated in the advection routines.
794	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
795	THEN
796	!$OMP DO
797	DO i = nxl, nxr
798	DO j = nys, nyn
799	DO k = nzb, nzt+1
800	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
801
802	u2 = u(k,j,i)**2
803	v2 = v(k,j,i)**2
804	w2 = w(k,j,i)**2
805	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
806	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
807
808	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
809	* flag
810	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
811	* flag
812	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
813	* flag
814	!
815	!-- Perturbation energy
816
817	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
818	( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
819	* flag
820	ENDDO
821	ENDDO
822	ENDDO
823	ENDIF
824	!
825	!-- Computaion of domain-averaged perturbation energy. Please note,
826	!-- to prevent that perturbation energy is larger (even if only slightly)
827	!-- than the total kinetic energy, calculation is based on deviations from
828	!-- the horizontal mean, instead of spatial descretization of the advection
829	!-- term.
830	!$OMP DO
831	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag, w2, ust2, vst2) &
832	!$ACC PRESENT(wall_flags_total_0, u, v, w, rmask, hom(:,1,1:2,sr)) &
833	!$ACC PRESENT(sums_l)
834	DO i = nxl, nxr
835	DO j = nys, nyn
836	DO k = nzb, nzt+1
837	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
838
839	w2 = w(k,j,i)**2
840	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
841	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
842	w2 = w(k,j,i)**2
843
844	!$ACC ATOMIC
845	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
846	+ 0.5_wp * ( ust2 + vst2 + w2 ) &
847	* rmask(j,i,sr) &
848	* flag
849
850	ENDDO
851	ENDDO
852	ENDDO
853	!$ACC UPDATE HOST(sums_l(nzb+5:nzb+5,pr_palm,tn))
854
855	!
856	!-- Horizontally averaged profiles of the vertical fluxes
857
858	!$OMP DO
859	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, l, m) &
860	!$ACC PRIVATE(ki, flag, ust, vst, pts) &
861	!$ACC PRESENT(kh, km, u, v, w, pt) &
862	!$ACC PRESENT(wall_flags_total_0, rmask, ddzu, rho_air_zw, hom(:,1,1:4,sr)) &
863	!$ACC PRESENT(heatflux_output_conversion, momentumflux_output_conversion) &
864	!$ACC PRESENT(surf_def_h(0:2), surf_lsm_h, surf_usm_h) &
865	!$ACC PRESENT(sums_l)
866	DO i = nxl, nxr
867	DO j = nys, nyn
868	!
869	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
870	!-- oterwise from k=nzb+1)
871	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
872	!-- ---- strictly speaking the following k-loop would have to be
873	!-- split up according to the staggered grid.
874	!-- However, this implies no error since staggered velocity
875	!-- components are zero at the walls and inside buildings.
876	!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
877	!-- which are added further below.
878	DO k = nzb, nzt
879	flag = MERGE( 1.0_wp, 0.0_wp, &
880	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
881	MERGE( 1.0_wp, 0.0_wp, &
882	BTEST( wall_flags_total_0(k,j,i), 9 ) )
883	!
884	!-- Momentum flux w"u"
885	!$ACC ATOMIC
886	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
887	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
888	) * ( &
889	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
890	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
891	) * rmask(j,i,sr) &
892	* rho_air_zw(k) &
893	* momentumflux_output_conversion(k) &
894	* flag
895	!
896	!-- Momentum flux w"v"
897	!$ACC ATOMIC
898	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
899	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
900	) * ( &
901	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
902	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
903	) * rmask(j,i,sr) &
904	* rho_air_zw(k) &
905	* momentumflux_output_conversion(k) &
906	* flag
907	!
908	!-- Heat flux w"pt"
909	!$ACC ATOMIC
910	sums_l(k,16,tn) = sums_l(k,16,tn) &
911	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
912	* ( pt(k+1,j,i) - pt(k,j,i) ) &
913	* rho_air_zw(k) &
914	* heatflux_output_conversion(k) &
915	* ddzu(k+1) * rmask(j,i,sr) &
916	* flag
917
918	!
919	!-- Salinity flux w"sa"
920	#ifndef _OPENACC
921	IF ( ocean_mode ) THEN
922	sums_l(k,65,tn) = sums_l(k,65,tn) &
923	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
924	* ( sa(k+1,j,i) - sa(k,j,i) ) &
925	* ddzu(k+1) * rmask(j,i,sr) &
926	* flag
927	ENDIF
928
929	!
930	!-- Buoyancy flux, water flux (humidity flux) w"q"
931	IF ( humidity ) THEN
932	sums_l(k,45,tn) = sums_l(k,45,tn) &
933	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
934	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
935	* rho_air_zw(k) &
936	* heatflux_output_conversion(k) &
937	* ddzu(k+1) * rmask(j,i,sr) * flag
938	sums_l(k,48,tn) = sums_l(k,48,tn) &
939	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
940	* ( q(k+1,j,i) - q(k,j,i) ) &
941	* rho_air_zw(k) &
942	* waterflux_output_conversion(k)&
943	* ddzu(k+1) * rmask(j,i,sr) * flag
944
945	IF ( bulk_cloud_model ) THEN
946	sums_l(k,51,tn) = sums_l(k,51,tn) &
947	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
948	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
949	- ( q(k,j,i) - ql(k,j,i) ) ) &
950	* rho_air_zw(k) &
951	* waterflux_output_conversion(k)&
952	* ddzu(k+1) * rmask(j,i,sr) * flag
953	ENDIF
954	ENDIF
955
956	!
957	!-- Passive scalar flux
958	IF ( passive_scalar ) THEN
959	sums_l(k,117,tn) = sums_l(k,117,tn) &
960	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
961	* ( s(k+1,j,i) - s(k,j,i) ) &
962	* ddzu(k+1) * rmask(j,i,sr) &
963	* flag
964	ENDIF
965	#endif
966
967	ENDDO
968
969	!
970	!-- Subgridscale fluxes in the Prandtl layer
971	IF ( use_surface_fluxes ) THEN
972	DO l = 0, 1
973	! The original code using MERGE doesn't work with the PGI
974	! compiler when running on the GPU.
975	! This is submitted as a compiler Bug in PGI ticket TPR#26718
976	! ki = MERGE( -1, 0, l == 0 )
977	ki = -1 + l
978	IF ( surf_def_h(l)%ns >= 1 ) THEN
979	DO m = surf_def_h(l)%start_index(j,i), &
980	surf_def_h(l)%end_index(j,i)
981	k = surf_def_h(l)%k(m)
982
983	!$ACC ATOMIC
984	sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
985	momentumflux_output_conversion(k+ki) * &
986	surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
987	!$ACC ATOMIC
988	sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
989	momentumflux_output_conversion(k+ki) * &
990	surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
991	!$ACC ATOMIC
992	sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
993	heatflux_output_conversion(k+ki) * &
994	surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
995	#if 0
996	sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
997	0.0_wp * rmask(j,i,sr) ! u"pt"
998	sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
999	0.0_wp * rmask(j,i,sr) ! v"pt"
1000	#endif
1001	#ifndef _OPENACC
1002	IF ( ocean_mode ) THEN
1003	sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
1004	surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
1005	ENDIF
1006	IF ( humidity ) THEN
1007	sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
1008	waterflux_output_conversion(k+ki) * &
1009	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1010	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
1011	( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
1012	surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
1013	surf_def_h(l)%qsws(m) ) &
1014	* heatflux_output_conversion(k+ki)
1015	IF ( cloud_droplets ) THEN
1016	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
1017	( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
1018	ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
1019	0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
1020	* heatflux_output_conversion(k+ki)
1021	ENDIF
1022	IF ( bulk_cloud_model ) THEN
1023	!
1024	!-- Formula does not work if ql(k+ki) /= 0.0
1025	sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
1026	waterflux_output_conversion(k+ki) * &
1027	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1028	ENDIF
1029	ENDIF
1030	IF ( passive_scalar ) THEN
1031	sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
1032	surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
1033	ENDIF
1034	#endif
1035
1036	ENDDO
1037
1038	ENDIF
1039	ENDDO
1040	IF ( surf_lsm_h%end_index(j,i) >= &
1041	surf_lsm_h%start_index(j,i) ) THEN
1042	m = surf_lsm_h%start_index(j,i)
1043	!$ACC ATOMIC
1044	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
1045	momentumflux_output_conversion(nzb) * &
1046	surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
1047	!$ACC ATOMIC
1048	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
1049	momentumflux_output_conversion(nzb) * &
1050	surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
1051	!$ACC ATOMIC
1052	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
1053	heatflux_output_conversion(nzb) * &
1054	surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
1055	#if 0
1056	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
1057	0.0_wp * rmask(j,i,sr) ! u"pt"
1058	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
1059	0.0_wp * rmask(j,i,sr) ! v"pt"
1060	#endif
1061	#ifndef _OPENACC
1062	IF ( ocean_mode ) THEN
1063	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
1064	surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
1065	ENDIF
1066	IF ( humidity ) THEN
1067	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
1068	waterflux_output_conversion(nzb) * &
1069	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1070	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
1071	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
1072	surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
1073	surf_lsm_h%qsws(m) ) &
1074	* heatflux_output_conversion(nzb)
1075	IF ( cloud_droplets ) THEN
1076	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
1077	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
1078	ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
1079	0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
1080	* heatflux_output_conversion(nzb)
1081	ENDIF
1082	IF ( bulk_cloud_model ) THEN
1083	!
1084	!-- Formula does not work if ql(nzb) /= 0.0
1085	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
1086	waterflux_output_conversion(nzb) * &
1087	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1088	ENDIF
1089	ENDIF
1090	IF ( passive_scalar ) THEN
1091	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
1092	surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
1093	ENDIF
1094	#endif
1095
1096	ENDIF
1097	IF ( surf_usm_h%end_index(j,i) >= &
1098	surf_usm_h%start_index(j,i) ) THEN
1099	m = surf_usm_h%start_index(j,i)
1100	!$ACC ATOMIC
1101	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
1102	momentumflux_output_conversion(nzb) * &
1103	surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
1104	!$ACC ATOMIC
1105	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
1106	momentumflux_output_conversion(nzb) * &
1107	surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
1108	!$ACC ATOMIC
1109	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
1110	heatflux_output_conversion(nzb) * &
1111	surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
1112	#if 0
1113	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
1114	0.0_wp * rmask(j,i,sr) ! u"pt"
1115	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
1116	0.0_wp * rmask(j,i,sr) ! v"pt"
1117	#endif
1118	#ifndef _OPENACC
1119	IF ( ocean_mode ) THEN
1120	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
1121	surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
1122	ENDIF
1123	IF ( humidity ) THEN
1124	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
1125	waterflux_output_conversion(nzb) * &
1126	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1127	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
1128	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
1129	surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
1130	surf_usm_h%qsws(m) ) &
1131	* heatflux_output_conversion(nzb)
1132	IF ( cloud_droplets ) THEN
1133	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
1134	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
1135	ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
1136	0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
1137	* heatflux_output_conversion(nzb)
1138	ENDIF
1139	IF ( bulk_cloud_model ) THEN
1140	!
1141	!-- Formula does not work if ql(nzb) /= 0.0
1142	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
1143	waterflux_output_conversion(nzb) * &
1144	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1145	ENDIF
1146	ENDIF
1147	IF ( passive_scalar ) THEN
1148	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
1149	surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
1150	ENDIF
1151	#endif
1152
1153	ENDIF
1154
1155	ENDIF
1156
1157	#ifndef _OPENACC
1158	IF ( .NOT. neutral ) THEN
1159	IF ( surf_def_h(0)%end_index(j,i) >= &
1160	surf_def_h(0)%start_index(j,i) ) THEN
1161	m = surf_def_h(0)%start_index(j,i)
1162	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
1163	surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
1164	ENDIF
1165	IF ( surf_lsm_h%end_index(j,i) >= &
1166	surf_lsm_h%start_index(j,i) ) THEN
1167	m = surf_lsm_h%start_index(j,i)
1168	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
1169	surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
1170	ENDIF
1171	IF ( surf_usm_h%end_index(j,i) >= &
1172	surf_usm_h%start_index(j,i) ) THEN
1173	m = surf_usm_h%start_index(j,i)
1174	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
1175	surf_usm_h%ol(m) * rmask(j,i,sr) ! L
1176	ENDIF
1177	ENDIF
1178
1179	IF ( radiation ) THEN
1180	IF ( surf_def_h(0)%end_index(j,i) >= &
1181	surf_def_h(0)%start_index(j,i) ) THEN
1182	m = surf_def_h(0)%start_index(j,i)
1183	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
1184	surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
1185	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
1186	surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
1187	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
1188	surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
1189	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
1190	surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
1191	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
1192	surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
1193	ENDIF
1194	IF ( surf_lsm_h%end_index(j,i) >= &
1195	surf_lsm_h%start_index(j,i) ) THEN
1196	m = surf_lsm_h%start_index(j,i)
1197	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
1198	surf_lsm_h%rad_net(m) * rmask(j,i,sr)
1199	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
1200	surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
1201	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
1202	surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
1203	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
1204	surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
1205	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
1206	surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
1207	ENDIF
1208	IF ( surf_usm_h%end_index(j,i) >= &
1209	surf_usm_h%start_index(j,i) ) THEN
1210	m = surf_usm_h%start_index(j,i)
1211	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
1212	surf_usm_h%rad_net(m) * rmask(j,i,sr)
1213	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
1214	surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
1215	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
1216	surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
1217	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
1218	surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
1219	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
1220	surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
1221	ENDIF
1222
1223	#if defined ( __rrtmg )
1224	IF ( radiation_scheme == 'rrtmg' ) THEN
1225
1226	IF ( surf_def_h(0)%end_index(j,i) >= &
1227	surf_def_h(0)%start_index(j,i) ) THEN
1228	m = surf_def_h(0)%start_index(j,i)
1229	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
1230	surf_def_h(0)%rrtm_aldif(m,0) * rmask(j,i,sr)
1231	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
1232	surf_def_h(0)%rrtm_aldir(m,0) * rmask(j,i,sr)
1233	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
1234	surf_def_h(0)%rrtm_asdif(m,0) * rmask(j,i,sr)
1235	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
1236	surf_def_h(0)%rrtm_asdir(m,0) * rmask(j,i,sr)
1237	ENDIF
1238	IF ( surf_lsm_h%end_index(j,i) >= &
1239	surf_lsm_h%start_index(j,i) ) THEN
1240	m = surf_lsm_h%start_index(j,i)
1241	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
1242	SUM( surf_lsm_h%frac(m,:) * &
1243	surf_lsm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
1244	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
1245	SUM( surf_lsm_h%frac(m,:) * &
1246	surf_lsm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
1247	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
1248	SUM( surf_lsm_h%frac(m,:) * &
1249	surf_lsm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
1250	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
1251	SUM( surf_lsm_h%frac(m,:) * &
1252	surf_lsm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
1253	ENDIF
1254	IF ( surf_usm_h%end_index(j,i) >= &
1255	surf_usm_h%start_index(j,i) ) THEN
1256	m = surf_usm_h%start_index(j,i)
1257	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
1258	SUM( surf_usm_h%frac(m,:) * &
1259	surf_usm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
1260	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
1261	SUM( surf_usm_h%frac(m,:) * &
1262	surf_usm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
1263	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
1264	SUM( surf_usm_h%frac(m,:) * &
1265	surf_usm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
1266	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
1267	SUM( surf_usm_h%frac(m,:) * &
1268	surf_usm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
1269	ENDIF
1270
1271	ENDIF
1272	#endif
1273	ENDIF
1274	#endif
1275	!
1276	!-- Subgridscale fluxes at the top surface
1277	IF ( use_top_fluxes ) THEN
1278	m = surf_def_h(2)%start_index(j,i)
1279	!$ACC ATOMIC
1280	sums_l(nzt,12,tn) = sums_l(nzt,12,tn) + &
1281	momentumflux_output_conversion(nzt) * &
1282	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
1283	!$ACC ATOMIC
1284	sums_l(nzt+1,12,tn) = sums_l(nzt+1,12,tn) + &
1285	momentumflux_output_conversion(nzt+1) * &
1286	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
1287	!$ACC ATOMIC
1288	sums_l(nzt,14,tn) = sums_l(nzt,14,tn) + &
1289	momentumflux_output_conversion(nzt) * &
1290	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
1291	!$ACC ATOMIC
1292	sums_l(nzt+1,14,tn) = sums_l(nzt+1,14,tn) + &
1293	momentumflux_output_conversion(nzt+1) * &
1294	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
1295	!$ACC ATOMIC
1296	sums_l(nzt,16,tn) = sums_l(nzt,16,tn) + &
1297	heatflux_output_conversion(nzt) * &
1298	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
1299	!$ACC ATOMIC
1300	sums_l(nzt+1,16,tn) = sums_l(nzt+1,16,tn) + &
1301	heatflux_output_conversion(nzt+1) * &
1302	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
1303	#if 0
1304	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
1305	0.0_wp * rmask(j,i,sr) ! u"pt"
1306	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
1307	0.0_wp * rmask(j,i,sr) ! v"pt"
1308	#endif
1309	#ifndef _OPENACC
1310	IF ( ocean_mode ) THEN
1311	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
1312	surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
1313	ENDIF
1314	IF ( humidity ) THEN
1315	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
1316	waterflux_output_conversion(nzt) * &
1317	surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1318	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
1319	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
1320	surf_def_h(2)%shf(m) + &
1321	0.61_wp * pt(nzt,j,i) * &
1322	surf_def_h(2)%qsws(m) ) &
1323	* heatflux_output_conversion(nzt)
1324	IF ( cloud_droplets ) THEN
1325	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
1326	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
1327	ql(nzt,j,i) ) * &
1328	surf_def_h(2)%shf(m) + &
1329	0.61_wp * pt(nzt,j,i) * &
1330	surf_def_h(2)%qsws(m) )&
1331	* heatflux_output_conversion(nzt)
1332	ENDIF
1333	IF ( bulk_cloud_model ) THEN
1334	!
1335	!-- Formula does not work if ql(nzb) /= 0.0
1336	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
1337	waterflux_output_conversion(nzt) * &
1338	surf_def_h(2)%qsws(m) * rmask(j,i,sr)
1339	ENDIF
1340	ENDIF
1341	IF ( passive_scalar ) THEN
1342	sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
1343	surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
1344	ENDIF
1345	#endif
1346	ENDIF
1347
1348	!
1349	!-- Resolved fluxes (can be computed for all horizontal points)
1350	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
1351	!-- ---- speaking the following k-loop would have to be split up and
1352	!-- rearranged according to the staggered grid.
1353	DO k = nzb, nzt
1354	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
1355	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
1356	u(k+1,j,i) - hom(k+1,1,1,sr) )
1357	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
1358	v(k+1,j,i) - hom(k+1,1,2,sr) )
1359	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
1360	pt(k+1,j,i) - hom(k+1,1,4,sr) )
1361
1362	!-- Higher moments
1363	!$ACC ATOMIC
1364	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
1365	rmask(j,i,sr) * flag
1366	!$ACC ATOMIC
1367	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
1368	rmask(j,i,sr) * flag
1369
1370	!
1371	!-- Salinity flux and density (density does not belong to here,
1372	!-- but so far there is no other suitable place to calculate)
1373	#ifndef _OPENACC
1374	IF ( ocean_mode ) THEN
1375	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
1376	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
1377	sa(k+1,j,i) - hom(k+1,1,23,sr) )
1378	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
1379	rmask(j,i,sr) * flag
1380	ENDIF
1381	sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
1382	rmask(j,i,sr) * flag
1383	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
1384	rmask(j,i,sr) * flag
1385	ENDIF
1386
1387	!
1388	!-- Buoyancy flux, water flux, humidity flux, liquid water
1389	!-- content, rain drop concentration and rain water content
1390	IF ( humidity ) THEN
1391	IF ( bulk_cloud_model .OR. cloud_droplets ) THEN
1392	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
1393	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
1394	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
1395	rho_air_zw(k) * &
1396	heatflux_output_conversion(k) * &
1397	rmask(j,i,sr) * flag
1398	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
1399	* flag
1400
1401	IF ( .NOT. cloud_droplets ) THEN
1402	pts = 0.5_wp * &
1403	( ( q(k,j,i) - ql(k,j,i) ) - &
1404	hom(k,1,42,sr) + &
1405	( q(k+1,j,i) - ql(k+1,j,i) ) - &
1406	hom(k+1,1,42,sr) )
1407	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
1408	rho_air_zw(k) * &
1409	waterflux_output_conversion(k) * &
1410	rmask(j,i,sr) * &
1411	flag
1412	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
1413	rmask(j,i,sr) * &
1414	flag
1415	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
1416	rmask(j,i,sr) * &
1417	flag
1418	IF ( microphysics_morrison ) THEN
1419	sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
1420	rmask(j,i,sr) *&
1421	flag
1422	ENDIF
1423	IF ( microphysics_ice_phase ) THEN
1424	sums_l(k,124,tn) = sums_l(k,124,tn) + ni(k,j,i) * &
1425	rmask(j,i,sr) *&
1426	flag
1427	sums_l(k,125,tn) = sums_l(k,125,tn) + qi(k,j,i) * &
1428	rmask(j,i,sr) *&
1429	flag
1430	ENDIF
1431
1432	IF ( microphysics_seifert ) THEN
1433	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
1434	rmask(j,i,sr) *&
1435	flag
1436	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
1437	rmask(j,i,sr) *&
1438	flag
1439	ENDIF
1440	ENDIF
1441
1442	ELSE
1443	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
1444	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
1445	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
1446	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
1447	rho_air_zw(k) * &
1448	heatflux_output_conversion(k) * &
1449	rmask(j,i,sr) * &
1450	flag
1451	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
1452	sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
1453	hom(k,1,41,sr) ) * &
1454	sums_l(k,17,tn) + &
1455	0.61_wp * hom(k,1,4,sr) * &
1456	sums_l(k,49,tn) &
1457	) * heatflux_output_conversion(k) * &
1458	flag
1459	END IF
1460	END IF
1461	ENDIF
1462	!
1463	!-- Passive scalar flux
1464	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
1465	.OR. sr /= 0 ) ) THEN
1466	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
1467	s(k+1,j,i) - hom(k+1,1,115,sr) )
1468	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
1469	rmask(j,i,sr) * flag
1470	ENDIF
1471	#endif
1472
1473	!
1474	!-- Energy flux we
1475	!-- has to be adjusted
1476	!$ACC ATOMIC
1477	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
1478	( ust2 + vst2 + w(k,j,i)**2 ) &
1479	* rho_air_zw(k) &
1480	* momentumflux_output_conversion(k) &
1481	* rmask(j,i,sr) * flag
1482	ENDDO
1483	ENDDO
1484	ENDDO
1485	!$OMP END PARALLEL
1486
1487	!$ACC UPDATE &
1488	!$ACC HOST(sums_l(:,12,tn), sums_l(:,14,tn), sums_l(:,16,tn)) &
1489	!$ACC HOST(sums_l(:,35,tn), sums_l(:,36,tn), sums_l(:,37,tn))
1490	!
1491	!-- Treat land-surface quantities according to new wall model structure.
1492	IF ( land_surface ) THEN
1493	tn = 0
1494	!$OMP PARALLEL PRIVATE( i, j, m, tn )
1495	!$ tn = omp_get_thread_num()
1496	!$OMP DO
1497	DO m = 1, surf_lsm_h%ns
1498	i = surf_lsm_h%i(m)
1499	j = surf_lsm_h%j(m)
1500
1501	IF ( i >= nxl .AND. i <= nxr .AND. &
1502	j >= nys .AND. j <= nyn ) THEN
1503	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
1504	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
1505	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
1506	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
1507	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
1508	sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
1509	ENDIF
1510	ENDDO
1511	!$OMP END PARALLEL
1512
1513	tn = 0
1514	!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
1515	!$ tn = omp_get_thread_num()
1516	!$OMP DO
1517	DO m = 1, surf_lsm_h%ns
1518
1519	i = surf_lsm_h%i(m)
1520	j = surf_lsm_h%j(m)
1521
1522	IF ( i >= nxl .AND. i <= nxr .AND. &
1523	j >= nys .AND. j <= nyn ) THEN
1524
1525	DO k = nzb_soil, nzt_soil
1526	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
1527	* rmask(j,i,sr)
1528	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
1529	* rmask(j,i,sr)
1530	ENDDO
1531	ENDIF
1532	ENDDO
1533	!$OMP END PARALLEL
1534	ENDIF
1535	!
1536	!-- For speed optimization fluxes which have been computed in part directly
1537	!-- inside the WS advection routines are treated seperatly
1538	!-- Momentum fluxes first:
1539
1540	tn = 0
1541	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
1542	!$ tn = omp_get_thread_num()
1543	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
1544	!$OMP DO
1545	DO i = nxl, nxr
1546	DO j = nys, nyn
1547	DO k = nzb, nzt
1548	!
1549	!-- Flag 23 is used to mask surface fluxes as well as model-top
1550	!-- fluxes, which are added further below.
1551	flag = MERGE( 1.0_wp, 0.0_wp, &
1552	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
1553	MERGE( 1.0_wp, 0.0_wp, &
1554	BTEST( wall_flags_total_0(k,j,i), 9 ) )
1555
1556	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
1557	u(k+1,j,i) - hom(k+1,1,1,sr) )
1558	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
1559	v(k+1,j,i) - hom(k+1,1,2,sr) )
1560	!
1561	!-- Momentum flux wu
1562	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
1563	( w(k,j,i-1) + w(k,j,i) ) &
1564	* rho_air_zw(k) &
1565	* momentumflux_output_conversion(k) &
1566	* ust * rmask(j,i,sr) &
1567	* flag
1568	!
1569	!-- Momentum flux wv
1570	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
1571	( w(k,j-1,i) + w(k,j,i) ) &
1572	* rho_air_zw(k) &
1573	* momentumflux_output_conversion(k) &
1574	* vst * rmask(j,i,sr) &
1575	* flag
1576	ENDDO
1577	ENDDO
1578	ENDDO
1579
1580	ENDIF
1581	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
1582	!$OMP DO
1583	DO i = nxl, nxr
1584	DO j = nys, nyn
1585	DO k = nzb, nzt
1586	flag = MERGE( 1.0_wp, 0.0_wp, &
1587	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
1588	MERGE( 1.0_wp, 0.0_wp, &
1589	BTEST( wall_flags_total_0(k,j,i), 9 ) )
1590	!
1591	!-- Vertical heat flux
1592	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
1593	( pt(k,j,i) - hom(k,1,4,sr) + &
1594	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
1595	* rho_air_zw(k) &
1596	* heatflux_output_conversion(k) &
1597	* w(k,j,i) * rmask(j,i,sr) * flag
1598	IF ( humidity ) THEN
1599	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
1600	q(k+1,j,i) - hom(k+1,1,41,sr) )
1601	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
1602	rho_air_zw(k) * &
1603	waterflux_output_conversion(k) * &
1604	rmask(j,i,sr) * flag
1605	ENDIF
1606	IF ( passive_scalar ) THEN
1607	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
1608	s(k+1,j,i) - hom(k+1,1,115,sr) )
1609	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
1610	rmask(j,i,sr) * flag
1611	ENDIF
1612	ENDDO
1613	ENDDO
1614	ENDDO
1615
1616	ENDIF
1617
1618	!
1619	!-- Density at top follows Neumann condition
1620	IF ( ocean_mode ) THEN
1621	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
1622	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
1623	ENDIF
1624
1625	!
1626	!-- Divergence of vertical flux of resolved scale energy and pressure
1627	!-- fluctuations as well as flux of pressure fluctuation itself (68).
1628	!-- First calculate the products, then the divergence.
1629	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
1630	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
1631	THEN
1632	sums_ll = 0.0_wp ! local array
1633
1634	!$OMP DO
1635	DO i = nxl, nxr
1636	DO j = nys, nyn
1637	DO k = nzb+1, nzt
1638	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1639
1640	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
1641	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
1642	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
1643	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
1644	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
1645	+ w(k,j,i)*2 ) flag
1646
1647	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
1648	* ( ( p(k,j,i) + p(k+1,j,i) ) &
1649	/ momentumflux_output_conversion(k) ) &
1650	* flag
1651
1652	ENDDO
1653	ENDDO
1654	ENDDO
1655	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
1656	sums_ll(nzt+1,1) = 0.0_wp
1657	sums_ll(0,2) = 0.0_wp
1658	sums_ll(nzt+1,2) = 0.0_wp
1659
1660	DO k = nzb+1, nzt
1661	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
1662	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
1663	sums_l(k,68,tn) = sums_ll(k,2)
1664	ENDDO
1665	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
1666	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
1667	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
1668
1669	ENDIF
1670
1671	!
1672	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
1673	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
1674	THEN
1675	!$OMP DO
1676	DO i = nxl, nxr
1677	DO j = nys, nyn
1678	DO k = nzb+1, nzt
1679
1680	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1681
1682	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
1683	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
1684	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
1685	) * ddzw(k) &
1686	* flag
1687
1688	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
1689	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
1690	) * flag
1691
1692	ENDDO
1693	ENDDO
1694	ENDDO
1695	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
1696	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
1697
1698	ENDIF
1699
1700	!
1701	!-- Horizontal heat fluxes (subgrid, resolved, total).
1702	!-- Do it only, if profiles shall be plotted.
1703	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
1704
1705	!$OMP DO
1706	DO i = nxl, nxr
1707	DO j = nys, nyn
1708	DO k = nzb+1, nzt
1709	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1710	!
1711	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
1712	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
1713	( kh(k,j,i) + kh(k,j,i-1) ) &
1714	* ( pt(k,j,i-1) - pt(k,j,i) ) &
1715	* rho_air_zw(k) &
1716	* heatflux_output_conversion(k) &
1717	* ddx * rmask(j,i,sr) * flag
1718	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
1719	( kh(k,j,i) + kh(k,j-1,i) ) &
1720	* ( pt(k,j-1,i) - pt(k,j,i) ) &
1721	* rho_air_zw(k) &
1722	* heatflux_output_conversion(k) &
1723	* ddy * rmask(j,i,sr) * flag
1724	!
1725	!-- Resolved horizontal heat fluxes upt, vpt
1726	sums_l(k,59,tn) = sums_l(k,59,tn) + &
1727	( u(k,j,i) - hom(k,1,1,sr) ) &
1728	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
1729	pt(k,j,i) - hom(k,1,4,sr) ) &
1730	* heatflux_output_conversion(k) &
1731	* flag
1732	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
1733	pt(k,j,i) - hom(k,1,4,sr) )
1734	sums_l(k,62,tn) = sums_l(k,62,tn) + &
1735	( v(k,j,i) - hom(k,1,2,sr) ) &
1736	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
1737	pt(k,j,i) - hom(k,1,4,sr) ) &
1738	* heatflux_output_conversion(k) &
1739	* flag
1740	ENDDO
1741	ENDDO
1742	ENDDO
1743	!
1744	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
1745	sums_l(nzb,58,tn) = 0.0_wp
1746	sums_l(nzb,59,tn) = 0.0_wp
1747	sums_l(nzb,60,tn) = 0.0_wp
1748	sums_l(nzb,61,tn) = 0.0_wp
1749	sums_l(nzb,62,tn) = 0.0_wp
1750	sums_l(nzb,63,tn) = 0.0_wp
1751
1752	ENDIF
1753	!$OMP END PARALLEL
1754
1755	!
1756	!-- Collect current large scale advection and subsidence tendencies for
1757	!-- data output
1758	IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
1759	!
1760	!-- Interpolation in time of LSF_DATA
1761	nt = 1
1762	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
1763	nt = nt + 1
1764	ENDDO
1765	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
1766	nt = nt - 1
1767	ENDIF
1768
1769	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
1770	/ ( time_vert(nt+1)-time_vert(nt) )
1771
1772
1773	DO k = nzb, nzt
1774	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
1775	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
1776	sums_ls_l(k,1) = td_lsa_q(k,nt) &
1777	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
1778	ENDDO
1779
1780	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
1781	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
1782
1783	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
1784
1785	DO k = nzb, nzt
1786	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
1787	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
1788	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
1789	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
1790	ENDDO
1791
1792	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
1793	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
1794
1795	ENDIF
1796
1797	ENDIF
1798
1799	tn = 0
1800	!$OMP PARALLEL PRIVATE( i, j, k, tn )
1801	!$ tn = omp_get_thread_num()
1802	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
1803	!$OMP DO
1804	DO i = nxl, nxr
1805	DO j = nys, nyn
1806	DO k = nzb+1, nzt+1
1807	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1808
1809	sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
1810	* rmask(j,i,sr) * flag
1811	sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
1812	* rmask(j,i,sr) * flag
1813	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
1814	* rmask(j,i,sr) * flag
1815	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
1816	* rmask(j,i,sr) * flag
1817	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
1818	* rmask(j,i,sr) * flag
1819	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
1820	* rmask(j,i,sr) * flag
1821	sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
1822	* rmask(j,i,sr) * flag
1823	sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
1824	* rmask(j,i,sr) * flag
1825	ENDDO
1826	ENDDO
1827	ENDDO
1828	ENDIF
1829
1830	!
1831	!-- Calculate the profiles for all other modules
1832	CALL module_interface_statistics( 'profiles', sr, tn, dots_max )
1833	!$OMP END PARALLEL
1834
1835	!
1836	!-- Summation of thread sums
1837	IF ( threads_per_task > 1 ) THEN
1838	DO i = 1, threads_per_task-1
1839	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
1840	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
1841	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
1842	sums_l(:,45:pr_palm,i)
1843	IF ( max_pr_user > 0 ) THEN
1844	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
1845	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
1846	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
1847	ENDIF
1848
1849	IF ( air_chemistry ) THEN
1850	IF ( max_pr_cs > 0 ) THEN
1851	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+ max_pr_cs,0) = &
1852	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,0) + &
1853	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,i)
1854
1855	ENDIF
1856	ENDIF
1857	IF ( salsa ) THEN
1858	IF ( max_pr_cs > 0 ) THEN
1859	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) = &
1860	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) + &
1861	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,i)
1862
1863	ENDIF
1864	ENDIF
1865	ENDDO
1866	ENDIF
1867
1868	#if defined( __parallel )
1869
1870	!
1871	!-- Compute total sum from local sums
1872	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1873	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
1874	MPI_SUM, comm2d, ierr )
1875	IF ( large_scale_forcing ) THEN
1876	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
1877	MPI_REAL, MPI_SUM, comm2d, ierr )
1878	ENDIF
1879
1880	IF ( air_chemistry .AND. max_pr_cs > 0 ) THEN
1881	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1882	DO i = 1, max_pr_cs
1883	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+i,0), &
1884	sums(nzb,pr_palm+max_pr_user+i), &
1885	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
1886	ENDDO
1887	ENDIF
1888
1889	IF ( salsa .AND. max_pr_salsa > 0 ) THEN
1890	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1891	DO i = 1, max_pr_salsa
1892	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+max_pr_cs+i,0), &
1893	sums(nzb,pr_palm+max_pr_user+max_pr_user+i), &
1894	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
1895	ENDDO
1896	ENDIF
1897
1898	#else
1899	sums = sums_l(:,:,0)
1900	IF ( large_scale_forcing ) THEN
1901	sums(:,81:88) = sums_ls_l
1902	ENDIF
1903	#endif
1904
1905	!
1906	!-- Final values are obtained by division by the total number of grid points
1907	!-- used for summation. After that store profiles.
1908	!-- Check, if statistical regions do contain at least one grid point at the
1909	!-- respective k-level, otherwise division by zero will lead to undefined
1910	!-- values, which may cause e.g. problems with NetCDF output
1911	!-- Profiles:
1912	DO k = nzb, nzt+1
1913	sums(k,3) = sums(k,3) / ngp_2dh(sr)
1914	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
1915	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
1916	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
1917	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
1918	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
1919	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
1920	sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
1921	sums(k,114) = sums(k,114) / ngp_2dh(sr)
1922	sums(k,117) = sums(k,117) / ngp_2dh(sr)
1923	IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
1924	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
1925	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
1926	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
1927	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
1928	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
1929	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
1930	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
1931	sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
1932	sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
1933	sums(k,123:125) = sums(k,123:125) * ngp_2dh_s_inner(k,sr) / ngp_2dh(sr)
1934	ENDIF
1935	ENDDO
1936
1937	!-- u* and so on
1938	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
1939	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
1940	!-- above the topography, they are being divided by ngp_2dh(sr)
1941	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
1942	ngp_2dh(sr)
1943	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
1944	ngp_2dh(sr)
1945	sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
1946	ngp_2dh(sr)
1947	sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
1948	ngp_2dh(sr)
1949	!-- eges, e*
1950	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
1951	ngp_3d(sr)
1952	!-- Old and new divergence
1953	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
1954	ngp_3d_inner(sr)
1955
1956	!-- User-defined profiles
1957	IF ( max_pr_user > 0 ) THEN
1958	DO k = nzb, nzt+1
1959	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
1960	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
1961	ngp_2dh_s_inner(k,sr)
1962	ENDDO
1963	ENDIF
1964
1965	IF ( air_chemistry ) THEN
1966	IF ( max_pr_cs > 0 ) THEN
1967	DO k = nzb, nzt+1
1968	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) = &
1969	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) / &
1970	ngp_2dh_s_inner(k,sr)
1971	ENDDO
1972	ENDIF
1973	ENDIF
1974
1975	IF ( salsa ) THEN
1976	IF ( max_pr_salsa > 0 ) THEN
1977	DO k = nzb, nzt+1
1978	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) = &
1979	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) &
1980	/ ngp_2dh_s_inner(k,sr)
1981	ENDDO
1982	ENDIF
1983	ENDIF
1984
1985	!
1986	!-- Collect horizontal average in hom.
1987	!-- Compute deduced averages (e.g. total heat flux)
1988	hom(:,1,3,sr) = sums(:,3) ! w
1989	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
1990	hom(:,1,9,sr) = sums(:,9) ! km
1991	hom(:,1,10,sr) = sums(:,10) ! kh
1992	hom(:,1,11,sr) = sums(:,11) ! l
1993	hom(:,1,12,sr) = sums(:,12) ! w"u"
1994	hom(:,1,13,sr) = sums(:,13) ! wu
1995	hom(:,1,14,sr) = sums(:,14) ! w"v"
1996	hom(:,1,15,sr) = sums(:,15) ! wv
1997	hom(:,1,16,sr) = sums(:,16) ! w"pt"
1998	hom(:,1,17,sr) = sums(:,17) ! wpt
1999	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
2000	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
2001	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
2002	hom(:,1,21,sr) = sums(:,21) ! wptBC
2003	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
2004	! profile 24 is initial profile (sa)
2005	! profiles 25-29 left empty for initial
2006	! profiles
2007	hom(:,1,30,sr) = sums(:,30) ! u*2
2008	hom(:,1,31,sr) = sums(:,31) ! v*2
2009	hom(:,1,32,sr) = sums(:,32) ! w*2
2010	hom(:,1,33,sr) = sums(:,33) ! pt*2
2011	hom(:,1,34,sr) = sums(:,34) ! e*
2012	hom(:,1,35,sr) = sums(:,35) ! w2pt
2013	hom(:,1,36,sr) = sums(:,36) ! wpt2
2014	hom(:,1,37,sr) = sums(:,37) ! we
2015	hom(:,1,38,sr) = sums(:,38) ! w*3
2016	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
2017	hom(:,1,40,sr) = sums(:,40) ! p
2018	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
2019	hom(:,1,46,sr) = sums(:,46) ! wvpt
2020	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
2021	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
2022	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
2023	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
2024	hom(:,1,51,sr) = sums(:,51) ! w"qv"
2025	hom(:,1,52,sr) = sums(:,52) ! wqv
2026	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
2027	hom(:,1,54,sr) = sums(:,54) ! ql
2028	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
2029	hom(:,1,56,sr) = sums(:,56) ! wp/dz
2030	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
2031	hom(:,1,58,sr) = sums(:,58) ! u"pt"
2032	hom(:,1,59,sr) = sums(:,59) ! upt
2033	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
2034	hom(:,1,61,sr) = sums(:,61) ! v"pt"
2035	hom(:,1,62,sr) = sums(:,62) ! vpt
2036	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
2037	hom(:,1,64,sr) = sums(:,64) ! rho_ocean
2038	hom(:,1,65,sr) = sums(:,65) ! w"sa"
2039	hom(:,1,66,sr) = sums(:,66) ! wsa
2040	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
2041	hom(:,1,68,sr) = sums(:,68) ! wp
2042	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
2043	hom(:,1,70,sr) = sums(:,70) ! q*2
2044	hom(:,1,71,sr) = sums(:,71) ! prho
2045	hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
2046	hom(:,1,123,sr) = sums(:,123) ! nc
2047	hom(:,1,124,sr) = sums(:,124) ! ni
2048	hom(:,1,125,sr) = sums(:,125) ! qi
2049	hom(:,1,73,sr) = sums(:,73) ! nr
2050	hom(:,1,74,sr) = sums(:,74) ! qr
2051	hom(:,1,75,sr) = sums(:,75) ! qc
2052	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
2053	! 77 is initial density profile
2054	hom(:,1,78,sr) = ug ! ug
2055	hom(:,1,79,sr) = vg ! vg
2056	hom(:,1,80,sr) = w_subs ! w_subs
2057
2058	IF ( large_scale_forcing ) THEN
2059	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
2060	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
2061	IF ( use_subsidence_tendencies ) THEN
2062	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
2063	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
2064	ELSE
2065	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
2066	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
2067	ENDIF
2068	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
2069	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
2070	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
2071	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
2072	ENDIF
2073
2074	IF ( land_surface ) THEN
2075	hom(:,1,89,sr) = sums(:,89) ! t_soil
2076	! 90 is initial t_soil profile
2077	hom(:,1,91,sr) = sums(:,91) ! m_soil
2078	! 92 is initial m_soil profile
2079	hom(:,1,93,sr) = sums(:,93) ! ghf
2080	hom(:,1,94,sr) = sums(:,94) ! qsws_liq
2081	hom(:,1,95,sr) = sums(:,95) ! qsws_soil
2082	hom(:,1,96,sr) = sums(:,96) ! qsws_veg
2083	hom(:,1,97,sr) = sums(:,97) ! r_a
2084	hom(:,1,98,sr) = sums(:,98) ! r_s
2085
2086	ENDIF
2087
2088	IF ( radiation ) THEN
2089	hom(:,1,99,sr) = sums(:,99) ! rad_net
2090	hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
2091	hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
2092	hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
2093	hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
2094
2095	IF ( radiation_scheme == 'rrtmg' ) THEN
2096	hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
2097	hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
2098	hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
2099	hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
2100
2101	hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
2102	hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
2103	hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
2104	hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
2105	ENDIF
2106	ENDIF
2107
2108	hom(:,1,112,sr) = sums(:,112) !: L
2109
2110	IF ( passive_scalar ) THEN
2111	hom(:,1,117,sr) = sums(:,117) ! w"s"
2112	hom(:,1,114,sr) = sums(:,114) ! ws
2113	hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
2114	hom(:,1,116,sr) = sums(:,116) ! s*2
2115	ENDIF
2116
2117	hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
2118	hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
2119
2120	IF ( kolmogorov_length_scale ) THEN
2121	hom(:,1,121,sr) = sums(:,121) * 1E3_wp ! eta in mm
2122	ENDIF
2123
2124
2125	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
2126	! u, w'u', w'v', t (in last profile)
2127
2128	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
2129	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
2130	sums(:,pr_palm+1:pr_palm+max_pr_user)
2131	ENDIF
2132
2133	IF ( air_chemistry ) THEN
2134	IF ( max_pr_cs > 0 ) THEN ! chem_spcs profiles
2135	hom(:, 1, pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs, sr) = &
2136	sums(:, pr_palm+max_pr_user+1:pr_palm+max_pr_user+max_pr_cs)
2137	ENDIF
2138	ENDIF
2139
2140	IF ( salsa ) THEN
2141	IF ( max_pr_salsa > 0 ) THEN ! salsa profiles
2142	hom(:,1,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa, sr) = &
2143	sums(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa)
2144	ENDIF
2145	ENDIF
2146	!
2147	!-- Determine the boundary layer height using two different schemes.
2148	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
2149	!-- first relative minimum (maximum) of the total heat flux.
2150	!-- The corresponding height is assumed as the boundary layer height, if it
2151	!-- is less than 1.5 times the height where the heat flux becomes negative
2152	!-- (positive) for the first time. Attention: the resolved vertical sensible
2153	!-- heat flux (hom(:,1,17,sr) = wpt) is not known at the beginning because
2154	!-- the calculation happens in advec_s_ws which is called after
2155	!-- flow_statistics. Therefore z_i is directly taken from restart data at
2156	!-- the beginning of restart runs.
2157	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .OR. &
2158	simulated_time_at_begin /= simulated_time ) THEN
2159
2160	z_i(1) = 0.0_wp
2161	first = .TRUE.
2162
2163	IF ( ocean_mode ) THEN
2164	DO k = nzt, nzb+1, -1
2165	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
2166	first = .FALSE.
2167	height = zw(k)
2168	ENDIF
2169	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
2170	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
2171	IF ( zw(k) < 1.5_wp * height ) THEN
2172	z_i(1) = zw(k)
2173	ELSE
2174	z_i(1) = height
2175	ENDIF
2176	EXIT
2177	ENDIF
2178	ENDDO
2179	ELSE
2180	DO k = nzb, nzt-1
2181	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
2182	first = .FALSE.
2183	height = zw(k)
2184	ENDIF
2185	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
2186	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
2187	IF ( zw(k) < 1.5_wp * height ) THEN
2188	z_i(1) = zw(k)
2189	ELSE
2190	z_i(1) = height
2191	ENDIF
2192	EXIT
2193	ENDIF
2194	ENDDO
2195	ENDIF
2196
2197	!
2198	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
2199	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
2200	!-- maximal local temperature gradient: starting from the second (the
2201	!-- last but one) vertical gridpoint, the local gradient must be at least
2202	!-- 0.2K/100m and greater than the next four gradients.
2203	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
2204	!-- ocean case!
2205	z_i(2) = 0.0_wp
2206	DO k = nzb+1, nzt+1
2207	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
2208	ENDDO
2209	dptdz_threshold = 0.2_wp / 100.0_wp
2210
2211	IF ( ocean_mode ) THEN
2212	DO k = nzt+1, nzb+5, -1
2213	IF ( dptdz(k) > dptdz_threshold .AND. &
2214	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND.&
2215	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
2216	z_i(2) = zw(k-1)
2217	EXIT
2218	ENDIF
2219	ENDDO
2220	ELSE
2221	DO k = nzb+1, nzt-3
2222	IF ( dptdz(k) > dptdz_threshold .AND. &
2223	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND.&
2224	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
2225	z_i(2) = zw(k-1)
2226	EXIT
2227	ENDIF
2228	ENDDO
2229	ENDIF
2230
2231	ENDIF
2232
2233	hom(nzb+6,1,pr_palm,sr) = z_i(1)
2234	hom(nzb+7,1,pr_palm,sr) = z_i(2)
2235
2236	!
2237	!-- Determine vertical index which is nearest to the mean surface level
2238	!-- height of the respective statistic region
2239	DO k = nzb, nzt
2240	IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
2241	k_surface_level = k
2242	EXIT
2243	ENDIF
2244	ENDDO
2245
2246	!
2247	!-- Computation of both the characteristic vertical velocity and
2248	!-- the characteristic convective boundary layer temperature.
2249	!-- The inversion height entering into the equation is defined with respect
2250	!-- to the mean surface level height of the respective statistic region.
2251	!-- The horizontal average at surface level index + 1 is input for the
2252	!-- average temperature.
2253	IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
2254	THEN
2255	hom(nzb+8,1,pr_palm,sr) = &
2256	( g / hom(k_surface_level+1,1,4,sr) * &
2257	( hom(k_surface_level,1,18,sr) / &
2258	( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
2259	* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
2260	ELSE
2261	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
2262	ENDIF
2263
2264	!
2265	!-- Collect the time series quantities. Please note, timeseries quantities
2266	!-- which are collected from horizontally averaged profiles, e.g. wpt
2267	!-- or pt(zp), are treated specially. In case of elevated model surfaces,
2268	!-- index nzb+1 might be within topography and data will be zero. Therefore,
2269	!-- take value for the first atmosphere index, which is topo_min_level+1.
2270	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
2271	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
2272	ts_value(3,sr) = dt_3d
2273	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
2274	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
2275	ts_value(6,sr) = u_max
2276	ts_value(7,sr) = v_max
2277	ts_value(8,sr) = w_max
2278	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
2279	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
2280	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
2281	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
2282	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
2283	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
2284	ts_value(15,sr) = hom(topo_min_level+1,1,16,sr) ! w'pt' at k=1
2285	ts_value(16,sr) = hom(topo_min_level+1,1,18,sr) ! wpt at k=1
2286	ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
2287	ts_value(18,sr) = hom(topo_min_level+1,1,4,sr) ! pt(zp)
2288	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
2289	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
2290	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
2291
2292	IF ( .NOT. neutral ) THEN
2293	ts_value(22,sr) = hom(nzb,1,112,sr) ! L
2294	ELSE
2295	ts_value(22,sr) = 1.0E10_wp
2296	ENDIF
2297
2298	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
2299
2300	IF ( passive_scalar ) THEN
2301	ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
2302	ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
2303	ENDIF
2304
2305	!
2306	!-- Collect land surface model timeseries
2307	IF ( land_surface ) THEN
2308	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
2309	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
2310	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
2311	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
2312	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
2313	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
2314	ENDIF
2315	!
2316	!-- Collect radiation model timeseries
2317	IF ( radiation ) THEN
2318	ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
2319	ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
2320	ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
2321	ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
2322	ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
2323
2324	IF ( radiation_scheme == 'rrtmg' ) THEN
2325	ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
2326	ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
2327	ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
2328	ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
2329	ENDIF
2330
2331	ENDIF
2332
2333	!
2334	!-- Calculate additional statistics provided by other modules
2335	CALL module_interface_statistics( 'time_series', sr, 0, dots_max )
2336
2337	ENDDO ! loop of the subregions
2338
2339	!
2340	!-- If required, sum up horizontal averages for subsequent time averaging.
2341	!-- Do not sum, if flow statistics is called before the first initial time step.
2342	IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
2343	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
2344	hom_sum = hom_sum + hom(:,1,:,:)
2345	average_count_pr = average_count_pr + 1
2346	do_sum = .FALSE.
2347	ENDIF
2348
2349	!
2350	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
2351	!-- This flag is reset after each time step in time_integration.
2352	flow_statistics_called = .TRUE.
2353
2354	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
2355
2356
2357	END SUBROUTINE flow_statistics

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |