Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 4445

Last change on this file since 4445 was 4444, checked in by raasch, 5 years ago
bugfix: cpp-directives for serial mode added
Property svn:keywords set to `Id`
File size: 106.5 KB

Line
1	!> @file flow_statistics.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2020 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! ------------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: flow_statistics.f90 4444 2020-03-05 15:59:50Z raasch $
27	! bugfix: cpp-directives for serial mode added
28	!
29	! 4442 2020-03-04 19:21:13Z suehring
30	! Change order of dimension in surface array %frac to allow for better
31	! vectorization.
32	!
33	! 4441 2020-03-04 19:20:35Z suehring
34	! Introduction of wall_flags_total_0, which currently sets bits based on static
35	! topography information used in wall_flags_static_0
36	!
37	! 4329 2019-12-10 15:46:36Z motisi
38	! Renamed wall_flags_0 to wall_flags_static_0
39	!
40	! 4182 2019-08-22 15:20:23Z scharf
41	! Corrected "Former revisions" section
42	!
43	! 4131 2019-08-02 11:06:18Z monakurppa
44	! Allow profile output for salsa variables.
45	!
46	! 4039 2019-06-18 10:32:41Z suehring
47	! Correct conversion to kinematic scalar fluxes in case of pw-scheme and
48	! statistic regions
49	!
50	! 3828 2019-03-27 19:36:23Z raasch
51	! unused variables removed
52	!
53	! 3676 2019-01-16 15:07:05Z knoop
54	! Bugfix, terminate OMP Parallel block
55	!
56	! Revision 1.1 1997/08/11 06:15:17 raasch
57	! Initial revision
58	!
59	!
60	! Description:
61	! ------------
62	!> Compute average profiles and further average flow quantities for the different
63	!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
64	!>
65	!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
66	!> lower vertical index for k-loops for all variables, although strictly
67	!> speaking the k-loops would have to be split up according to the staggered
68	!> grid. However, this implies no error since staggered velocity components
69	!> are zero at the walls and inside buildings.
70	!------------------------------------------------------------------------------!
71	SUBROUTINE flow_statistics
72
73
74	USE arrays_3d, &
75	ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
76	momentumflux_output_conversion, nc, nr, p, prho, prr, pt, q, &
77	qc, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
78	sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, &
79	zw, d_exner
80
81	USE basic_constants_and_equations_mod, &
82	ONLY: g, lv_d_cp
83
84	USE bulk_cloud_model_mod, &
85	ONLY: bulk_cloud_model, microphysics_morrison, microphysics_seifert
86
87	USE chem_modules, &
88	ONLY: max_pr_cs
89
90	USE control_parameters, &
91	ONLY: air_chemistry, average_count_pr, cloud_droplets, do_sum, &
92	dt_3d, humidity, initializing_actions, land_surface, &
93	large_scale_forcing, large_scale_subsidence, max_pr_user, &
94	message_string, neutral, ocean_mode, passive_scalar, &
95	simulated_time, simulated_time_at_begin, &
96	use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
97	ws_scheme_mom, ws_scheme_sca, salsa, max_pr_salsa
98
99	USE cpulog, &
100	ONLY: cpu_log, log_point
101
102	USE grid_variables, &
103	ONLY: ddx, ddy
104
105	USE indices, &
106	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, nxl, nxr, nyn, &
107	nys, nzb, nzt, topo_min_level, wall_flags_total_0
108
109	#if defined( __parallel )
110	USE indices, &
111	ONLY: ngp_sums, ngp_sums_ls
112	#endif
113
114	USE kinds
115
116	USE land_surface_model_mod, &
117	ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
118
119	USE lsf_nudging_mod, &
120	ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
121
122	USE module_interface, &
123	ONLY: module_interface_statistics
124
125	USE netcdf_interface, &
126	ONLY: dots_rad, dots_soil, dots_max
127
128	USE pegrid
129
130	USE radiation_model_mod, &
131	ONLY: radiation, radiation_scheme, &
132	rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
133	rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
134
135	USE statistics
136
137	USE surface_mod, &
138	ONLY : surf_def_h, surf_lsm_h, surf_usm_h
139
140
141	IMPLICIT NONE
142
143	INTEGER(iwp) :: i !<
144	INTEGER(iwp) :: j !<
145	INTEGER(iwp) :: k !<
146	INTEGER(iwp) :: ki !<
147	INTEGER(iwp) :: k_surface_level !<
148	INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
149	INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
150	INTEGER(iwp) :: nt !<
151	!$ INTEGER(iwp) :: omp_get_thread_num !<
152	INTEGER(iwp) :: sr !<
153	INTEGER(iwp) :: tn !<
154
155	LOGICAL :: first !<
156
157	REAL(wp) :: dptdz_threshold !<
158	REAL(wp) :: fac !<
159	REAL(wp) :: flag !<
160	REAL(wp) :: height !<
161	REAL(wp) :: pts !<
162	REAL(wp) :: sums_l_etot !<
163	REAL(wp) :: ust !<
164	REAL(wp) :: ust2 !<
165	REAL(wp) :: u2 !<
166	REAL(wp) :: vst !<
167	REAL(wp) :: vst2 !<
168	REAL(wp) :: v2 !<
169	REAL(wp) :: w2 !<
170
171	REAL(wp) :: dptdz(nzb+1:nzt+1) !<
172	REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
173
174	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
175
176
177	!
178	!-- To be on the safe side, check whether flow_statistics has already been
179	!-- called once after the current time step
180	IF ( flow_statistics_called ) THEN
181
182	message_string = 'flow_statistics is called two times within one ' // &
183	'timestep'
184	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
185
186	ENDIF
187
188	!
189	!-- Compute statistics for each (sub-)region
190	DO sr = 0, statistic_regions
191
192	!
193	!-- Initialize (local) summation array
194	sums_l = 0.0_wp
195	#ifdef _OPENACC
196	!$ACC KERNELS PRESENT(sums_l)
197	sums_l = 0.0_wp
198	!$ACC END KERNELS
199	#endif
200
201	!
202	!-- Store sums that have been computed in other subroutines in summation
203	!-- array
204	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
205	!-- WARNING: next line still has to be adjusted for OpenMP
206	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
207	heatflux_output_conversion ! heat flux from advec_s_bc
208	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
209	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
210
211	!
212	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
213	!-- scale) vertical fluxes and velocity variances by using commonly-
214	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
215	!-- in combination with the 5th order advection scheme, pronounced
216	!-- artificial kinks could be observed in the vertical profiles near the
217	!-- surface. Please note: these kinks were not related to the model truth,
218	!-- i.e. these kinks are just related to an evaluation problem.
219	!-- In order avoid these kinks, vertical fluxes and horizontal as well
220	!-- vertical velocity variances are calculated directly within the advection
221	!-- routines, according to the numerical discretization, to evaluate the
222	!-- statistical quantities as they will appear within the prognostic
223	!-- equations.
224	!-- Copy the turbulent quantities, evaluated in the advection routines to
225	!-- the local array sums_l() for further computations.
226	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
227
228	!
229	!-- According to the Neumann bc for the horizontal velocity components,
230	!-- the corresponding fluxes has to satisfiy the same bc.
231	IF ( ocean_mode ) THEN
232	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
233	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
234	ENDIF
235
236	DO i = 0, threads_per_task-1
237	!
238	!-- Swap the turbulent quantities evaluated in advec_ws.
239	sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
240	* momentumflux_output_conversion ! wu
241	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
242	* momentumflux_output_conversion ! wv
243	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
244	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
245	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
246	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
247	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
248	sums_ws2_ws_l(:,i) ) ! e*
249	ENDDO
250
251	ENDIF
252
253	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
254
255	DO i = 0, threads_per_task-1
256	sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
257	* heatflux_output_conversion ! wpt
258	IF ( ocean_mode ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
259	IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
260	* waterflux_output_conversion ! wq
261	IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! ws
262	ENDDO
263
264	ENDIF
265	!
266	!-- Horizontally averaged profiles of horizontal velocities and temperature.
267	!-- They must have been computed before, because they are already required
268	!-- for other horizontal averages.
269	tn = 0
270	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
271	!$ tn = omp_get_thread_num()
272	!$OMP DO
273	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag) &
274	!$ACC PRESENT(wall_flags_total_0, u, v, pt, rmask, sums_l)
275	DO i = nxl, nxr
276	DO j = nys, nyn
277	DO k = nzb, nzt+1
278	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
279	!$ACC ATOMIC
280	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
281	* flag
282	!$ACC ATOMIC
283	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
284	* flag
285	!$ACC ATOMIC
286	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
287	* flag
288	ENDDO
289	ENDDO
290	ENDDO
291	!$ACC UPDATE HOST(sums_l(:,1,tn), sums_l(:,2,tn), sums_l(:,4,tn))
292
293	!
294	!-- Horizontally averaged profile of salinity
295	IF ( ocean_mode ) THEN
296	!$OMP DO
297	DO i = nxl, nxr
298	DO j = nys, nyn
299	DO k = nzb, nzt+1
300	sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
301	* rmask(j,i,sr) &
302	* MERGE( 1.0_wp, 0.0_wp, &
303	BTEST( wall_flags_total_0(k,j,i), 22 ) )
304	ENDDO
305	ENDDO
306	ENDDO
307	ENDIF
308
309	!
310	!-- Horizontally averaged profiles of virtual potential temperature,
311	!-- total water content, water vapor mixing ratio and liquid water potential
312	!-- temperature
313	IF ( humidity ) THEN
314	!$OMP DO
315	DO i = nxl, nxr
316	DO j = nys, nyn
317	DO k = nzb, nzt+1
318	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
319	sums_l(k,44,tn) = sums_l(k,44,tn) + &
320	vpt(k,j,i) * rmask(j,i,sr) * flag
321	sums_l(k,41,tn) = sums_l(k,41,tn) + &
322	q(k,j,i) * rmask(j,i,sr) * flag
323	ENDDO
324	ENDDO
325	ENDDO
326	IF ( bulk_cloud_model ) THEN
327	!$OMP DO
328	DO i = nxl, nxr
329	DO j = nys, nyn
330	DO k = nzb, nzt+1
331	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
332	sums_l(k,42,tn) = sums_l(k,42,tn) + &
333	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
334	* flag
335	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
336	pt(k,j,i) + lv_d_cp * d_exner(k) * ql(k,j,i) &
337	) * rmask(j,i,sr) &
338	* flag
339	ENDDO
340	ENDDO
341	ENDDO
342	ENDIF
343	ENDIF
344
345	!
346	!-- Horizontally averaged profiles of passive scalar
347	IF ( passive_scalar ) THEN
348	!$OMP DO
349	DO i = nxl, nxr
350	DO j = nys, nyn
351	DO k = nzb, nzt+1
352	sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
353	* rmask(j,i,sr) &
354	* MERGE( 1.0_wp, 0.0_wp, &
355	BTEST( wall_flags_total_0(k,j,i), 22 ) )
356	ENDDO
357	ENDDO
358	ENDDO
359	ENDIF
360	!$OMP END PARALLEL
361	!
362	!-- Summation of thread sums
363	IF ( threads_per_task > 1 ) THEN
364	DO i = 1, threads_per_task-1
365	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
366	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
367	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
368	IF ( ocean_mode ) THEN
369	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
370	ENDIF
371	IF ( humidity ) THEN
372	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
373	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
374	IF ( bulk_cloud_model ) THEN
375	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
376	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
377	ENDIF
378	ENDIF
379	IF ( passive_scalar ) THEN
380	sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
381	ENDIF
382	ENDDO
383	ENDIF
384
385	#if defined( __parallel )
386	!
387	!-- Compute total sum from local sums
388	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
389	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
390	MPI_SUM, comm2d, ierr )
391	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
392	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
393	MPI_SUM, comm2d, ierr )
394	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
395	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
396	MPI_SUM, comm2d, ierr )
397	IF ( ocean_mode ) THEN
398	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
399	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
400	MPI_REAL, MPI_SUM, comm2d, ierr )
401	ENDIF
402	IF ( humidity ) THEN
403	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
404	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
405	MPI_REAL, MPI_SUM, comm2d, ierr )
406	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
407	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
408	MPI_REAL, MPI_SUM, comm2d, ierr )
409	IF ( bulk_cloud_model ) THEN
410	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
411	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
412	MPI_REAL, MPI_SUM, comm2d, ierr )
413	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
414	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
415	MPI_REAL, MPI_SUM, comm2d, ierr )
416	ENDIF
417	ENDIF
418
419	IF ( passive_scalar ) THEN
420	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
421	CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
422	MPI_REAL, MPI_SUM, comm2d, ierr )
423	ENDIF
424	#else
425	sums(:,1) = sums_l(:,1,0)
426	sums(:,2) = sums_l(:,2,0)
427	sums(:,4) = sums_l(:,4,0)
428	IF ( ocean_mode ) sums(:,23) = sums_l(:,23,0)
429	IF ( humidity ) THEN
430	sums(:,44) = sums_l(:,44,0)
431	sums(:,41) = sums_l(:,41,0)
432	IF ( bulk_cloud_model ) THEN
433	sums(:,42) = sums_l(:,42,0)
434	sums(:,43) = sums_l(:,43,0)
435	ENDIF
436	ENDIF
437	IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
438	#endif
439
440	!
441	!-- Final values are obtained by division by the total number of grid points
442	!-- used for summation. After that store profiles.
443	sums(:,1) = sums(:,1) / ngp_2dh(sr)
444	sums(:,2) = sums(:,2) / ngp_2dh(sr)
445	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
446	hom(:,1,1,sr) = sums(:,1) ! u
447	hom(:,1,2,sr) = sums(:,2) ! v
448	hom(:,1,4,sr) = sums(:,4) ! pt
449	!$ACC UPDATE DEVICE(hom(:,1,1,sr), hom(:,1,2,sr), hom(:,1,4,sr))
450
451
452	!
453	!-- Salinity
454	IF ( ocean_mode ) THEN
455	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
456	hom(:,1,23,sr) = sums(:,23) ! sa
457	ENDIF
458
459	!
460	!-- Humidity and cloud parameters
461	IF ( humidity ) THEN
462	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
463	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
464	hom(:,1,44,sr) = sums(:,44) ! vpt
465	hom(:,1,41,sr) = sums(:,41) ! qv (q)
466	IF ( bulk_cloud_model ) THEN
467	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
468	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
469	hom(:,1,42,sr) = sums(:,42) ! qv
470	hom(:,1,43,sr) = sums(:,43) ! pt
471	ENDIF
472	ENDIF
473
474	!
475	!-- Passive scalar
476	IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
477	ngp_2dh_s_inner(:,sr) ! s
478
479	!
480	!-- Horizontally averaged profiles of the remaining prognostic variables,
481	!-- variances, the total and the perturbation energy (single values in last
482	!-- column of sums_l) and some diagnostic quantities.
483	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
484	!-- ---- speaking the following k-loop would have to be split up and
485	!-- rearranged according to the staggered grid.
486	!-- However, this implies no error since staggered velocity components
487	!-- are zero at the walls and inside buildings.
488	tn = 0
489	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, &
490	!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
491	!$OMP w2, flag, m, ki, l )
492	!$ tn = omp_get_thread_num()
493	!$OMP DO
494	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, m) &
495	!$ACC PRIVATE(sums_l_etot, flag) &
496	!$ACC PRESENT(wall_flags_total_0, rmask, momentumflux_output_conversion) &
497	!$ACC PRESENT(hom(:,1,4,sr)) &
498	!$ACC PRESENT(e, u, v, w, km, kh, p, pt) &
499	!$ACC PRESENT(surf_def_h(0), surf_lsm_h, surf_usm_h) &
500	!$ACC PRESENT(sums_l)
501	DO i = nxl, nxr
502	DO j = nys, nyn
503	sums_l_etot = 0.0_wp
504	DO k = nzb, nzt+1
505	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
506	!
507	!-- Prognostic and diagnostic variables
508	!$ACC ATOMIC
509	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
510	* flag
511	!$ACC ATOMIC
512	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
513	* flag
514	!$ACC ATOMIC
515	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
516	* flag
517	!$ACC ATOMIC
518	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
519	* flag
520	!$ACC ATOMIC
521	sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
522	/ momentumflux_output_conversion(k) ) &
523	* flag
524
525	!$ACC ATOMIC
526	sums_l(k,33,tn) = sums_l(k,33,tn) + &
527	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)&
528	* flag
529	#ifndef _OPENACC
530	IF ( humidity ) THEN
531	sums_l(k,70,tn) = sums_l(k,70,tn) + &
532	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)&
533	* flag
534	ENDIF
535	IF ( passive_scalar ) THEN
536	sums_l(k,116,tn) = sums_l(k,116,tn) + &
537	( s(k,j,i)-hom(k,1,115,sr) )*2 rmask(j,i,sr)&
538	* flag
539	ENDIF
540	#endif
541	!
542	!-- Higher moments
543	!-- (Computation of the skewness of w further below)
544	!$ACC ATOMIC
545	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr) &
546	* flag
547
548	sums_l_etot = sums_l_etot + &
549	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
550	w(k,j,i)*2 ) rmask(j,i,sr)&
551	* flag
552	ENDDO
553	!
554	!-- Total and perturbation energy for the total domain (being
555	!-- collected in the last column of sums_l). Summation of these
556	!-- quantities is seperated from the previous loop in order to
557	!-- allow vectorization of that loop.
558	!$ACC ATOMIC
559	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
560	!
561	!-- 2D-arrays (being collected in the last column of sums_l)
562	IF ( surf_def_h(0)%end_index(j,i) >= &
563	surf_def_h(0)%start_index(j,i) ) THEN
564	m = surf_def_h(0)%start_index(j,i)
565	!$ACC ATOMIC
566	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
567	surf_def_h(0)%us(m) * rmask(j,i,sr)
568	!$ACC ATOMIC
569	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
570	surf_def_h(0)%usws(m) * rmask(j,i,sr)
571	!$ACC ATOMIC
572	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
573	surf_def_h(0)%vsws(m) * rmask(j,i,sr)
574	!$ACC ATOMIC
575	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
576	surf_def_h(0)%ts(m) * rmask(j,i,sr)
577	#ifndef _OPENACC
578	IF ( humidity ) THEN
579	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
580	surf_def_h(0)%qs(m) * rmask(j,i,sr)
581	ENDIF
582	IF ( passive_scalar ) THEN
583	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
584	surf_def_h(0)%ss(m) * rmask(j,i,sr)
585	ENDIF
586	#endif
587	!
588	!-- Summation of surface temperature.
589	!$ACC ATOMIC
590	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
591	surf_def_h(0)%pt_surface(m) * &
592	rmask(j,i,sr)
593	ENDIF
594	IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
595	m = surf_lsm_h%start_index(j,i)
596	!$ACC ATOMIC
597	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
598	surf_lsm_h%us(m) * rmask(j,i,sr)
599	!$ACC ATOMIC
600	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
601	surf_lsm_h%usws(m) * rmask(j,i,sr)
602	!$ACC ATOMIC
603	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
604	surf_lsm_h%vsws(m) * rmask(j,i,sr)
605	!$ACC ATOMIC
606	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
607	surf_lsm_h%ts(m) * rmask(j,i,sr)
608	#ifndef _OPENACC
609	IF ( humidity ) THEN
610	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
611	surf_lsm_h%qs(m) * rmask(j,i,sr)
612	ENDIF
613	IF ( passive_scalar ) THEN
614	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
615	surf_lsm_h%ss(m) * rmask(j,i,sr)
616	ENDIF
617	#endif
618	!
619	!-- Summation of surface temperature.
620	!$ACC ATOMIC
621	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
622	surf_lsm_h%pt_surface(m) * &
623	rmask(j,i,sr)
624	ENDIF
625	IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
626	m = surf_usm_h%start_index(j,i)
627	!$ACC ATOMIC
628	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
629	surf_usm_h%us(m) * rmask(j,i,sr)
630	!$ACC ATOMIC
631	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
632	surf_usm_h%usws(m) * rmask(j,i,sr)
633	!$ACC ATOMIC
634	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
635	surf_usm_h%vsws(m) * rmask(j,i,sr)
636	!$ACC ATOMIC
637	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
638	surf_usm_h%ts(m) * rmask(j,i,sr)
639	#ifndef _OPENACC
640	IF ( humidity ) THEN
641	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
642	surf_usm_h%qs(m) * rmask(j,i,sr)
643	ENDIF
644	IF ( passive_scalar ) THEN
645	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
646	surf_usm_h%ss(m) * rmask(j,i,sr)
647	ENDIF
648	#endif
649	!
650	!-- Summation of surface temperature.
651	!$ACC ATOMIC
652	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
653	surf_usm_h%pt_surface(m) * &
654	rmask(j,i,sr)
655	ENDIF
656	ENDDO
657	ENDDO
658	!$ACC UPDATE &
659	!$ACC HOST(sums_l(:,3,tn), sums_l(:,8,tn), sums_l(:,9,tn)) &
660	!$ACC HOST(sums_l(:,10,tn), sums_l(:,40,tn), sums_l(:,33,tn)) &
661	!$ACC HOST(sums_l(:,38,tn)) &
662	!$ACC HOST(sums_l(nzb:nzb+4,pr_palm,tn), sums_l(nzb+14:nzb+14,pr_palm,tn))
663
664	!
665	!-- Computation of statistics when ws-scheme is not used. Else these
666	!-- quantities are evaluated in the advection routines.
667	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
668	THEN
669	!$OMP DO
670	DO i = nxl, nxr
671	DO j = nys, nyn
672	DO k = nzb, nzt+1
673	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
674
675	u2 = u(k,j,i)**2
676	v2 = v(k,j,i)**2
677	w2 = w(k,j,i)**2
678	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
679	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
680
681	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
682	* flag
683	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
684	* flag
685	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
686	* flag
687	!
688	!-- Perturbation energy
689
690	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
691	( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
692	* flag
693	ENDDO
694	ENDDO
695	ENDDO
696	ENDIF
697	!
698	!-- Computaion of domain-averaged perturbation energy. Please note,
699	!-- to prevent that perturbation energy is larger (even if only slightly)
700	!-- than the total kinetic energy, calculation is based on deviations from
701	!-- the horizontal mean, instead of spatial descretization of the advection
702	!-- term.
703	!$OMP DO
704	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag, w2, ust2, vst2) &
705	!$ACC PRESENT(wall_flags_total_0, u, v, w, rmask, hom(:,1,1:2,sr)) &
706	!$ACC PRESENT(sums_l)
707	DO i = nxl, nxr
708	DO j = nys, nyn
709	DO k = nzb, nzt+1
710	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
711
712	w2 = w(k,j,i)**2
713	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
714	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
715	w2 = w(k,j,i)**2
716
717	!$ACC ATOMIC
718	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
719	+ 0.5_wp * ( ust2 + vst2 + w2 ) &
720	* rmask(j,i,sr) &
721	* flag
722	ENDDO
723	ENDDO
724	ENDDO
725	!$ACC UPDATE HOST(sums_l(nzb+5:nzb+5,pr_palm,tn))
726
727	!
728	!-- Horizontally averaged profiles of the vertical fluxes
729
730	!$OMP DO
731	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, l, m) &
732	!$ACC PRIVATE(ki, flag, ust, vst, pts) &
733	!$ACC PRESENT(kh, km, u, v, w, pt) &
734	!$ACC PRESENT(wall_flags_total_0, rmask, ddzu, rho_air_zw, hom(:,1,1:4,sr)) &
735	!$ACC PRESENT(heatflux_output_conversion, momentumflux_output_conversion) &
736	!$ACC PRESENT(surf_def_h(0:2), surf_lsm_h, surf_usm_h) &
737	!$ACC PRESENT(sums_l)
738	DO i = nxl, nxr
739	DO j = nys, nyn
740	!
741	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
742	!-- oterwise from k=nzb+1)
743	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
744	!-- ---- strictly speaking the following k-loop would have to be
745	!-- split up according to the staggered grid.
746	!-- However, this implies no error since staggered velocity
747	!-- components are zero at the walls and inside buildings.
748	!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
749	!-- which are added further below.
750	DO k = nzb, nzt
751	flag = MERGE( 1.0_wp, 0.0_wp, &
752	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
753	MERGE( 1.0_wp, 0.0_wp, &
754	BTEST( wall_flags_total_0(k,j,i), 9 ) )
755	!
756	!-- Momentum flux w"u"
757	!$ACC ATOMIC
758	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
759	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
760	) * ( &
761	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
762	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
763	) * rmask(j,i,sr) &
764	* rho_air_zw(k) &
765	* momentumflux_output_conversion(k) &
766	* flag
767	!
768	!-- Momentum flux w"v"
769	!$ACC ATOMIC
770	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
771	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
772	) * ( &
773	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
774	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
775	) * rmask(j,i,sr) &
776	* rho_air_zw(k) &
777	* momentumflux_output_conversion(k) &
778	* flag
779	!
780	!-- Heat flux w"pt"
781	!$ACC ATOMIC
782	sums_l(k,16,tn) = sums_l(k,16,tn) &
783	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
784	* ( pt(k+1,j,i) - pt(k,j,i) ) &
785	* rho_air_zw(k) &
786	* heatflux_output_conversion(k) &
787	* ddzu(k+1) * rmask(j,i,sr) &
788	* flag
789
790	!
791	!-- Salinity flux w"sa"
792	#ifndef _OPENACC
793	IF ( ocean_mode ) THEN
794	sums_l(k,65,tn) = sums_l(k,65,tn) &
795	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
796	* ( sa(k+1,j,i) - sa(k,j,i) ) &
797	* ddzu(k+1) * rmask(j,i,sr) &
798	* flag
799	ENDIF
800
801	!
802	!-- Buoyancy flux, water flux (humidity flux) w"q"
803	IF ( humidity ) THEN
804	sums_l(k,45,tn) = sums_l(k,45,tn) &
805	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
806	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
807	* rho_air_zw(k) &
808	* heatflux_output_conversion(k) &
809	* ddzu(k+1) * rmask(j,i,sr) * flag
810	sums_l(k,48,tn) = sums_l(k,48,tn) &
811	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
812	* ( q(k+1,j,i) - q(k,j,i) ) &
813	* rho_air_zw(k) &
814	* waterflux_output_conversion(k)&
815	* ddzu(k+1) * rmask(j,i,sr) * flag
816
817	IF ( bulk_cloud_model ) THEN
818	sums_l(k,51,tn) = sums_l(k,51,tn) &
819	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
820	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
821	- ( q(k,j,i) - ql(k,j,i) ) ) &
822	* rho_air_zw(k) &
823	* waterflux_output_conversion(k)&
824	* ddzu(k+1) * rmask(j,i,sr) * flag
825	ENDIF
826	ENDIF
827
828	!
829	!-- Passive scalar flux
830	IF ( passive_scalar ) THEN
831	sums_l(k,117,tn) = sums_l(k,117,tn) &
832	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
833	* ( s(k+1,j,i) - s(k,j,i) ) &
834	* ddzu(k+1) * rmask(j,i,sr) &
835	* flag
836	ENDIF
837	#endif
838
839	ENDDO
840
841	!
842	!-- Subgridscale fluxes in the Prandtl layer
843	IF ( use_surface_fluxes ) THEN
844	DO l = 0, 1
845	! The original code using MERGE doesn't work with the PGI
846	! compiler when running on the GPU.
847	! This is submitted as a compiler Bug in PGI ticket TPR#26718
848	! ki = MERGE( -1, 0, l == 0 )
849	ki = -1 + l
850	IF ( surf_def_h(l)%ns >= 1 ) THEN
851	DO m = surf_def_h(l)%start_index(j,i), &
852	surf_def_h(l)%end_index(j,i)
853	k = surf_def_h(l)%k(m)
854
855	!$ACC ATOMIC
856	sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
857	momentumflux_output_conversion(k+ki) * &
858	surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
859	!$ACC ATOMIC
860	sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
861	momentumflux_output_conversion(k+ki) * &
862	surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
863	!$ACC ATOMIC
864	sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
865	heatflux_output_conversion(k+ki) * &
866	surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
867	#if 0
868	sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
869	0.0_wp * rmask(j,i,sr) ! u"pt"
870	sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
871	0.0_wp * rmask(j,i,sr) ! v"pt"
872	#endif
873	#ifndef _OPENACC
874	IF ( ocean_mode ) THEN
875	sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
876	surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
877	ENDIF
878	IF ( humidity ) THEN
879	sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
880	waterflux_output_conversion(k+ki) * &
881	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
882	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
883	( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
884	surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
885	surf_def_h(l)%qsws(m) ) &
886	* heatflux_output_conversion(k+ki)
887	IF ( cloud_droplets ) THEN
888	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
889	( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
890	ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
891	0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
892	* heatflux_output_conversion(k+ki)
893	ENDIF
894	IF ( bulk_cloud_model ) THEN
895	!
896	!-- Formula does not work if ql(k+ki) /= 0.0
897	sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
898	waterflux_output_conversion(k+ki) * &
899	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
900	ENDIF
901	ENDIF
902	IF ( passive_scalar ) THEN
903	sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
904	surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
905	ENDIF
906	#endif
907
908	ENDDO
909
910	ENDIF
911	ENDDO
912	IF ( surf_lsm_h%end_index(j,i) >= &
913	surf_lsm_h%start_index(j,i) ) THEN
914	m = surf_lsm_h%start_index(j,i)
915	!$ACC ATOMIC
916	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
917	momentumflux_output_conversion(nzb) * &
918	surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
919	!$ACC ATOMIC
920	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
921	momentumflux_output_conversion(nzb) * &
922	surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
923	!$ACC ATOMIC
924	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
925	heatflux_output_conversion(nzb) * &
926	surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
927	#if 0
928	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
929	0.0_wp * rmask(j,i,sr) ! u"pt"
930	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
931	0.0_wp * rmask(j,i,sr) ! v"pt"
932	#endif
933	#ifndef _OPENACC
934	IF ( ocean_mode ) THEN
935	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
936	surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
937	ENDIF
938	IF ( humidity ) THEN
939	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
940	waterflux_output_conversion(nzb) * &
941	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
942	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
943	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
944	surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
945	surf_lsm_h%qsws(m) ) &
946	* heatflux_output_conversion(nzb)
947	IF ( cloud_droplets ) THEN
948	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
949	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
950	ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
951	0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
952	* heatflux_output_conversion(nzb)
953	ENDIF
954	IF ( bulk_cloud_model ) THEN
955	!
956	!-- Formula does not work if ql(nzb) /= 0.0
957	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
958	waterflux_output_conversion(nzb) * &
959	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
960	ENDIF
961	ENDIF
962	IF ( passive_scalar ) THEN
963	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
964	surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
965	ENDIF
966	#endif
967
968	ENDIF
969	IF ( surf_usm_h%end_index(j,i) >= &
970	surf_usm_h%start_index(j,i) ) THEN
971	m = surf_usm_h%start_index(j,i)
972	!$ACC ATOMIC
973	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
974	momentumflux_output_conversion(nzb) * &
975	surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
976	!$ACC ATOMIC
977	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
978	momentumflux_output_conversion(nzb) * &
979	surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
980	!$ACC ATOMIC
981	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
982	heatflux_output_conversion(nzb) * &
983	surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
984	#if 0
985	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
986	0.0_wp * rmask(j,i,sr) ! u"pt"
987	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
988	0.0_wp * rmask(j,i,sr) ! v"pt"
989	#endif
990	#ifndef _OPENACC
991	IF ( ocean_mode ) THEN
992	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
993	surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
994	ENDIF
995	IF ( humidity ) THEN
996	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
997	waterflux_output_conversion(nzb) * &
998	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
999	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
1000	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
1001	surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
1002	surf_usm_h%qsws(m) ) &
1003	* heatflux_output_conversion(nzb)
1004	IF ( cloud_droplets ) THEN
1005	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
1006	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
1007	ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
1008	0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
1009	* heatflux_output_conversion(nzb)
1010	ENDIF
1011	IF ( bulk_cloud_model ) THEN
1012	!
1013	!-- Formula does not work if ql(nzb) /= 0.0
1014	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
1015	waterflux_output_conversion(nzb) * &
1016	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1017	ENDIF
1018	ENDIF
1019	IF ( passive_scalar ) THEN
1020	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
1021	surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
1022	ENDIF
1023	#endif
1024
1025	ENDIF
1026
1027	ENDIF
1028
1029	#ifndef _OPENACC
1030	IF ( .NOT. neutral ) THEN
1031	IF ( surf_def_h(0)%end_index(j,i) >= &
1032	surf_def_h(0)%start_index(j,i) ) THEN
1033	m = surf_def_h(0)%start_index(j,i)
1034	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
1035	surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
1036	ENDIF
1037	IF ( surf_lsm_h%end_index(j,i) >= &
1038	surf_lsm_h%start_index(j,i) ) THEN
1039	m = surf_lsm_h%start_index(j,i)
1040	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
1041	surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
1042	ENDIF
1043	IF ( surf_usm_h%end_index(j,i) >= &
1044	surf_usm_h%start_index(j,i) ) THEN
1045	m = surf_usm_h%start_index(j,i)
1046	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
1047	surf_usm_h%ol(m) * rmask(j,i,sr) ! L
1048	ENDIF
1049	ENDIF
1050
1051	IF ( radiation ) THEN
1052	IF ( surf_def_h(0)%end_index(j,i) >= &
1053	surf_def_h(0)%start_index(j,i) ) THEN
1054	m = surf_def_h(0)%start_index(j,i)
1055	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
1056	surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
1057	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
1058	surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
1059	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
1060	surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
1061	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
1062	surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
1063	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
1064	surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
1065	ENDIF
1066	IF ( surf_lsm_h%end_index(j,i) >= &
1067	surf_lsm_h%start_index(j,i) ) THEN
1068	m = surf_lsm_h%start_index(j,i)
1069	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
1070	surf_lsm_h%rad_net(m) * rmask(j,i,sr)
1071	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
1072	surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
1073	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
1074	surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
1075	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
1076	surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
1077	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
1078	surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
1079	ENDIF
1080	IF ( surf_usm_h%end_index(j,i) >= &
1081	surf_usm_h%start_index(j,i) ) THEN
1082	m = surf_usm_h%start_index(j,i)
1083	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
1084	surf_usm_h%rad_net(m) * rmask(j,i,sr)
1085	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
1086	surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
1087	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
1088	surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
1089	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
1090	surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
1091	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
1092	surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
1093	ENDIF
1094
1095	#if defined ( __rrtmg )
1096	IF ( radiation_scheme == 'rrtmg' ) THEN
1097
1098	IF ( surf_def_h(0)%end_index(j,i) >= &
1099	surf_def_h(0)%start_index(j,i) ) THEN
1100	m = surf_def_h(0)%start_index(j,i)
1101	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
1102	surf_def_h(0)%rrtm_aldif(m,0) * rmask(j,i,sr)
1103	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
1104	surf_def_h(0)%rrtm_aldir(m,0) * rmask(j,i,sr)
1105	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
1106	surf_def_h(0)%rrtm_asdif(m,0) * rmask(j,i,sr)
1107	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
1108	surf_def_h(0)%rrtm_asdir(m,0) * rmask(j,i,sr)
1109	ENDIF
1110	IF ( surf_lsm_h%end_index(j,i) >= &
1111	surf_lsm_h%start_index(j,i) ) THEN
1112	m = surf_lsm_h%start_index(j,i)
1113	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
1114	SUM( surf_lsm_h%frac(m,:) * &
1115	surf_lsm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
1116	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
1117	SUM( surf_lsm_h%frac(m,:) * &
1118	surf_lsm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
1119	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
1120	SUM( surf_lsm_h%frac(m,:) * &
1121	surf_lsm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
1122	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
1123	SUM( surf_lsm_h%frac(m,:) * &
1124	surf_lsm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
1125	ENDIF
1126	IF ( surf_usm_h%end_index(j,i) >= &
1127	surf_usm_h%start_index(j,i) ) THEN
1128	m = surf_usm_h%start_index(j,i)
1129	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
1130	SUM( surf_usm_h%frac(m,:) * &
1131	surf_usm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
1132	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
1133	SUM( surf_usm_h%frac(m,:) * &
1134	surf_usm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
1135	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
1136	SUM( surf_usm_h%frac(m,:) * &
1137	surf_usm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
1138	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
1139	SUM( surf_usm_h%frac(m,:) * &
1140	surf_usm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
1141	ENDIF
1142
1143	ENDIF
1144	#endif
1145	ENDIF
1146	#endif
1147	!
1148	!-- Subgridscale fluxes at the top surface
1149	IF ( use_top_fluxes ) THEN
1150	m = surf_def_h(2)%start_index(j,i)
1151	!$ACC ATOMIC
1152	sums_l(nzt,12,tn) = sums_l(nzt,12,tn) + &
1153	momentumflux_output_conversion(nzt) * &
1154	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
1155	!$ACC ATOMIC
1156	sums_l(nzt+1,12,tn) = sums_l(nzt+1,12,tn) + &
1157	momentumflux_output_conversion(nzt+1) * &
1158	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
1159	!$ACC ATOMIC
1160	sums_l(nzt,14,tn) = sums_l(nzt,14,tn) + &
1161	momentumflux_output_conversion(nzt) * &
1162	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
1163	!$ACC ATOMIC
1164	sums_l(nzt+1,14,tn) = sums_l(nzt+1,14,tn) + &
1165	momentumflux_output_conversion(nzt+1) * &
1166	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
1167	!$ACC ATOMIC
1168	sums_l(nzt,16,tn) = sums_l(nzt,16,tn) + &
1169	heatflux_output_conversion(nzt) * &
1170	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
1171	!$ACC ATOMIC
1172	sums_l(nzt+1,16,tn) = sums_l(nzt+1,16,tn) + &
1173	heatflux_output_conversion(nzt+1) * &
1174	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
1175	#if 0
1176	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
1177	0.0_wp * rmask(j,i,sr) ! u"pt"
1178	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
1179	0.0_wp * rmask(j,i,sr) ! v"pt"
1180	#endif
1181	#ifndef _OPENACC
1182	IF ( ocean_mode ) THEN
1183	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
1184	surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
1185	ENDIF
1186	IF ( humidity ) THEN
1187	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
1188	waterflux_output_conversion(nzt) * &
1189	surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
1190	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
1191	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
1192	surf_def_h(2)%shf(m) + &
1193	0.61_wp * pt(nzt,j,i) * &
1194	surf_def_h(2)%qsws(m) ) &
1195	* heatflux_output_conversion(nzt)
1196	IF ( cloud_droplets ) THEN
1197	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
1198	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
1199	ql(nzt,j,i) ) * &
1200	surf_def_h(2)%shf(m) + &
1201	0.61_wp * pt(nzt,j,i) * &
1202	surf_def_h(2)%qsws(m) )&
1203	* heatflux_output_conversion(nzt)
1204	ENDIF
1205	IF ( bulk_cloud_model ) THEN
1206	!
1207	!-- Formula does not work if ql(nzb) /= 0.0
1208	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
1209	waterflux_output_conversion(nzt) * &
1210	surf_def_h(2)%qsws(m) * rmask(j,i,sr)
1211	ENDIF
1212	ENDIF
1213	IF ( passive_scalar ) THEN
1214	sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
1215	surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
1216	ENDIF
1217	#endif
1218	ENDIF
1219
1220	!
1221	!-- Resolved fluxes (can be computed for all horizontal points)
1222	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
1223	!-- ---- speaking the following k-loop would have to be split up and
1224	!-- rearranged according to the staggered grid.
1225	DO k = nzb, nzt
1226	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
1227	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
1228	u(k+1,j,i) - hom(k+1,1,1,sr) )
1229	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
1230	v(k+1,j,i) - hom(k+1,1,2,sr) )
1231	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
1232	pt(k+1,j,i) - hom(k+1,1,4,sr) )
1233
1234	!-- Higher moments
1235	!$ACC ATOMIC
1236	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
1237	rmask(j,i,sr) * flag
1238	!$ACC ATOMIC
1239	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
1240	rmask(j,i,sr) * flag
1241
1242	!
1243	!-- Salinity flux and density (density does not belong to here,
1244	!-- but so far there is no other suitable place to calculate)
1245	#ifndef _OPENACC
1246	IF ( ocean_mode ) THEN
1247	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
1248	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
1249	sa(k+1,j,i) - hom(k+1,1,23,sr) )
1250	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
1251	rmask(j,i,sr) * flag
1252	ENDIF
1253	sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
1254	rmask(j,i,sr) * flag
1255	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
1256	rmask(j,i,sr) * flag
1257	ENDIF
1258
1259	!
1260	!-- Buoyancy flux, water flux, humidity flux, liquid water
1261	!-- content, rain drop concentration and rain water content
1262	IF ( humidity ) THEN
1263	IF ( bulk_cloud_model .OR. cloud_droplets ) THEN
1264	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
1265	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
1266	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
1267	rho_air_zw(k) * &
1268	heatflux_output_conversion(k) * &
1269	rmask(j,i,sr) * flag
1270	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
1271	* flag
1272
1273	IF ( .NOT. cloud_droplets ) THEN
1274	pts = 0.5_wp * &
1275	( ( q(k,j,i) - ql(k,j,i) ) - &
1276	hom(k,1,42,sr) + &
1277	( q(k+1,j,i) - ql(k+1,j,i) ) - &
1278	hom(k+1,1,42,sr) )
1279	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
1280	rho_air_zw(k) * &
1281	waterflux_output_conversion(k) * &
1282	rmask(j,i,sr) * &
1283	flag
1284	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
1285	rmask(j,i,sr) * &
1286	flag
1287	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
1288	rmask(j,i,sr) * &
1289	flag
1290	IF ( microphysics_morrison ) THEN
1291	sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
1292	rmask(j,i,sr) *&
1293	flag
1294	ENDIF
1295	IF ( microphysics_seifert ) THEN
1296	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
1297	rmask(j,i,sr) *&
1298	flag
1299	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
1300	rmask(j,i,sr) *&
1301	flag
1302	ENDIF
1303	ENDIF
1304
1305	ELSE
1306	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
1307	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
1308	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
1309	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
1310	rho_air_zw(k) * &
1311	heatflux_output_conversion(k) * &
1312	rmask(j,i,sr) * &
1313	flag
1314	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
1315	sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
1316	hom(k,1,41,sr) ) * &
1317	sums_l(k,17,tn) + &
1318	0.61_wp * hom(k,1,4,sr) * &
1319	sums_l(k,49,tn) &
1320	) * heatflux_output_conversion(k) * &
1321	flag
1322	END IF
1323	END IF
1324	ENDIF
1325	!
1326	!-- Passive scalar flux
1327	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
1328	.OR. sr /= 0 ) ) THEN
1329	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
1330	s(k+1,j,i) - hom(k+1,1,115,sr) )
1331	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
1332	rmask(j,i,sr) * flag
1333	ENDIF
1334	#endif
1335
1336	!
1337	!-- Energy flux we
1338	!-- has to be adjusted
1339	!$ACC ATOMIC
1340	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
1341	( ust2 + vst2 + w(k,j,i)**2 ) &
1342	* rho_air_zw(k) &
1343	* momentumflux_output_conversion(k) &
1344	* rmask(j,i,sr) * flag
1345	ENDDO
1346	ENDDO
1347	ENDDO
1348	!$OMP END PARALLEL
1349
1350	!$ACC UPDATE &
1351	!$ACC HOST(sums_l(:,12,tn), sums_l(:,14,tn), sums_l(:,16,tn)) &
1352	!$ACC HOST(sums_l(:,35,tn), sums_l(:,36,tn), sums_l(:,37,tn))
1353	!
1354	!-- Treat land-surface quantities according to new wall model structure.
1355	IF ( land_surface ) THEN
1356	tn = 0
1357	!$OMP PARALLEL PRIVATE( i, j, m, tn )
1358	!$ tn = omp_get_thread_num()
1359	!$OMP DO
1360	DO m = 1, surf_lsm_h%ns
1361	i = surf_lsm_h%i(m)
1362	j = surf_lsm_h%j(m)
1363
1364	IF ( i >= nxl .AND. i <= nxr .AND. &
1365	j >= nys .AND. j <= nyn ) THEN
1366	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
1367	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
1368	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
1369	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
1370	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
1371	sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
1372	ENDIF
1373	ENDDO
1374	!$OMP END PARALLEL
1375
1376	tn = 0
1377	!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
1378	!$ tn = omp_get_thread_num()
1379	!$OMP DO
1380	DO m = 1, surf_lsm_h%ns
1381
1382	i = surf_lsm_h%i(m)
1383	j = surf_lsm_h%j(m)
1384
1385	IF ( i >= nxl .AND. i <= nxr .AND. &
1386	j >= nys .AND. j <= nyn ) THEN
1387
1388	DO k = nzb_soil, nzt_soil
1389	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
1390	* rmask(j,i,sr)
1391	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
1392	* rmask(j,i,sr)
1393	ENDDO
1394	ENDIF
1395	ENDDO
1396	!$OMP END PARALLEL
1397	ENDIF
1398	!
1399	!-- For speed optimization fluxes which have been computed in part directly
1400	!-- inside the WS advection routines are treated seperatly
1401	!-- Momentum fluxes first:
1402
1403	tn = 0
1404	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
1405	!$ tn = omp_get_thread_num()
1406	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
1407	!$OMP DO
1408	DO i = nxl, nxr
1409	DO j = nys, nyn
1410	DO k = nzb, nzt
1411	!
1412	!-- Flag 23 is used to mask surface fluxes as well as model-top
1413	!-- fluxes, which are added further below.
1414	flag = MERGE( 1.0_wp, 0.0_wp, &
1415	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
1416	MERGE( 1.0_wp, 0.0_wp, &
1417	BTEST( wall_flags_total_0(k,j,i), 9 ) )
1418
1419	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
1420	u(k+1,j,i) - hom(k+1,1,1,sr) )
1421	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
1422	v(k+1,j,i) - hom(k+1,1,2,sr) )
1423	!
1424	!-- Momentum flux wu
1425	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
1426	( w(k,j,i-1) + w(k,j,i) ) &
1427	* rho_air_zw(k) &
1428	* momentumflux_output_conversion(k) &
1429	* ust * rmask(j,i,sr) &
1430	* flag
1431	!
1432	!-- Momentum flux wv
1433	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
1434	( w(k,j-1,i) + w(k,j,i) ) &
1435	* rho_air_zw(k) &
1436	* momentumflux_output_conversion(k) &
1437	* vst * rmask(j,i,sr) &
1438	* flag
1439	ENDDO
1440	ENDDO
1441	ENDDO
1442
1443	ENDIF
1444	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
1445	!$OMP DO
1446	DO i = nxl, nxr
1447	DO j = nys, nyn
1448	DO k = nzb, nzt
1449	flag = MERGE( 1.0_wp, 0.0_wp, &
1450	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
1451	MERGE( 1.0_wp, 0.0_wp, &
1452	BTEST( wall_flags_total_0(k,j,i), 9 ) )
1453	!
1454	!-- Vertical heat flux
1455	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
1456	( pt(k,j,i) - hom(k,1,4,sr) + &
1457	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
1458	* rho_air_zw(k) &
1459	* heatflux_output_conversion(k) &
1460	* w(k,j,i) * rmask(j,i,sr) * flag
1461	IF ( humidity ) THEN
1462	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
1463	q(k+1,j,i) - hom(k+1,1,41,sr) )
1464	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
1465	rho_air_zw(k) * &
1466	waterflux_output_conversion(k) * &
1467	rmask(j,i,sr) * flag
1468	ENDIF
1469	IF ( passive_scalar ) THEN
1470	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
1471	s(k+1,j,i) - hom(k+1,1,115,sr) )
1472	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
1473	rmask(j,i,sr) * flag
1474	ENDIF
1475	ENDDO
1476	ENDDO
1477	ENDDO
1478
1479	ENDIF
1480
1481	!
1482	!-- Density at top follows Neumann condition
1483	IF ( ocean_mode ) THEN
1484	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
1485	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
1486	ENDIF
1487
1488	!
1489	!-- Divergence of vertical flux of resolved scale energy and pressure
1490	!-- fluctuations as well as flux of pressure fluctuation itself (68).
1491	!-- First calculate the products, then the divergence.
1492	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
1493	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
1494	THEN
1495	sums_ll = 0.0_wp ! local array
1496
1497	!$OMP DO
1498	DO i = nxl, nxr
1499	DO j = nys, nyn
1500	DO k = nzb+1, nzt
1501	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1502
1503	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
1504	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
1505	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
1506	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
1507	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
1508	+ w(k,j,i)*2 ) flag
1509
1510	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
1511	* ( ( p(k,j,i) + p(k+1,j,i) ) &
1512	/ momentumflux_output_conversion(k) ) &
1513	* flag
1514
1515	ENDDO
1516	ENDDO
1517	ENDDO
1518	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
1519	sums_ll(nzt+1,1) = 0.0_wp
1520	sums_ll(0,2) = 0.0_wp
1521	sums_ll(nzt+1,2) = 0.0_wp
1522
1523	DO k = nzb+1, nzt
1524	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
1525	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
1526	sums_l(k,68,tn) = sums_ll(k,2)
1527	ENDDO
1528	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
1529	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
1530	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
1531
1532	ENDIF
1533
1534	!
1535	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
1536	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
1537	THEN
1538	!$OMP DO
1539	DO i = nxl, nxr
1540	DO j = nys, nyn
1541	DO k = nzb+1, nzt
1542
1543	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1544
1545	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
1546	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
1547	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
1548	) * ddzw(k) &
1549	* flag
1550
1551	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
1552	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
1553	) * flag
1554
1555	ENDDO
1556	ENDDO
1557	ENDDO
1558	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
1559	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
1560
1561	ENDIF
1562
1563	!
1564	!-- Horizontal heat fluxes (subgrid, resolved, total).
1565	!-- Do it only, if profiles shall be plotted.
1566	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
1567
1568	!$OMP DO
1569	DO i = nxl, nxr
1570	DO j = nys, nyn
1571	DO k = nzb+1, nzt
1572	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1573	!
1574	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
1575	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
1576	( kh(k,j,i) + kh(k,j,i-1) ) &
1577	* ( pt(k,j,i-1) - pt(k,j,i) ) &
1578	* rho_air_zw(k) &
1579	* heatflux_output_conversion(k) &
1580	* ddx * rmask(j,i,sr) * flag
1581	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
1582	( kh(k,j,i) + kh(k,j-1,i) ) &
1583	* ( pt(k,j-1,i) - pt(k,j,i) ) &
1584	* rho_air_zw(k) &
1585	* heatflux_output_conversion(k) &
1586	* ddy * rmask(j,i,sr) * flag
1587	!
1588	!-- Resolved horizontal heat fluxes upt, vpt
1589	sums_l(k,59,tn) = sums_l(k,59,tn) + &
1590	( u(k,j,i) - hom(k,1,1,sr) ) &
1591	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
1592	pt(k,j,i) - hom(k,1,4,sr) ) &
1593	* heatflux_output_conversion(k) &
1594	* flag
1595	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
1596	pt(k,j,i) - hom(k,1,4,sr) )
1597	sums_l(k,62,tn) = sums_l(k,62,tn) + &
1598	( v(k,j,i) - hom(k,1,2,sr) ) &
1599	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
1600	pt(k,j,i) - hom(k,1,4,sr) ) &
1601	* heatflux_output_conversion(k) &
1602	* flag
1603	ENDDO
1604	ENDDO
1605	ENDDO
1606	!
1607	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
1608	sums_l(nzb,58,tn) = 0.0_wp
1609	sums_l(nzb,59,tn) = 0.0_wp
1610	sums_l(nzb,60,tn) = 0.0_wp
1611	sums_l(nzb,61,tn) = 0.0_wp
1612	sums_l(nzb,62,tn) = 0.0_wp
1613	sums_l(nzb,63,tn) = 0.0_wp
1614
1615	ENDIF
1616	!$OMP END PARALLEL
1617
1618	!
1619	!-- Collect current large scale advection and subsidence tendencies for
1620	!-- data output
1621	IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
1622	!
1623	!-- Interpolation in time of LSF_DATA
1624	nt = 1
1625	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
1626	nt = nt + 1
1627	ENDDO
1628	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
1629	nt = nt - 1
1630	ENDIF
1631
1632	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
1633	/ ( time_vert(nt+1)-time_vert(nt) )
1634
1635
1636	DO k = nzb, nzt
1637	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
1638	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
1639	sums_ls_l(k,1) = td_lsa_q(k,nt) &
1640	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
1641	ENDDO
1642
1643	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
1644	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
1645
1646	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
1647
1648	DO k = nzb, nzt
1649	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
1650	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
1651	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
1652	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
1653	ENDDO
1654
1655	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
1656	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
1657
1658	ENDIF
1659
1660	ENDIF
1661
1662	tn = 0
1663	!$OMP PARALLEL PRIVATE( i, j, k, tn )
1664	!$ tn = omp_get_thread_num()
1665	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
1666	!$OMP DO
1667	DO i = nxl, nxr
1668	DO j = nys, nyn
1669	DO k = nzb+1, nzt+1
1670	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
1671
1672	sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
1673	* rmask(j,i,sr) * flag
1674	sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
1675	* rmask(j,i,sr) * flag
1676	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
1677	* rmask(j,i,sr) * flag
1678	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
1679	* rmask(j,i,sr) * flag
1680	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
1681	* rmask(j,i,sr) * flag
1682	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
1683	* rmask(j,i,sr) * flag
1684	sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
1685	* rmask(j,i,sr) * flag
1686	sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
1687	* rmask(j,i,sr) * flag
1688	ENDDO
1689	ENDDO
1690	ENDDO
1691	ENDIF
1692
1693	!
1694	!-- Calculate the profiles for all other modules
1695	CALL module_interface_statistics( 'profiles', sr, tn, dots_max )
1696	!$OMP END PARALLEL
1697
1698	!
1699	!-- Summation of thread sums
1700	IF ( threads_per_task > 1 ) THEN
1701	DO i = 1, threads_per_task-1
1702	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
1703	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
1704	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
1705	sums_l(:,45:pr_palm,i)
1706	IF ( max_pr_user > 0 ) THEN
1707	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
1708	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
1709	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
1710	ENDIF
1711
1712	IF ( air_chemistry ) THEN
1713	IF ( max_pr_cs > 0 ) THEN
1714	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+ max_pr_cs,0) = &
1715	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,0) + &
1716	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,i)
1717
1718	ENDIF
1719	ENDIF
1720	IF ( salsa ) THEN
1721	IF ( max_pr_cs > 0 ) THEN
1722	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) = &
1723	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) + &
1724	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,i)
1725
1726	ENDIF
1727	ENDIF
1728	ENDDO
1729	ENDIF
1730
1731	#if defined( __parallel )
1732
1733	!
1734	!-- Compute total sum from local sums
1735	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1736	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
1737	MPI_SUM, comm2d, ierr )
1738	IF ( large_scale_forcing ) THEN
1739	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
1740	MPI_REAL, MPI_SUM, comm2d, ierr )
1741	ENDIF
1742
1743	IF ( air_chemistry .AND. max_pr_cs > 0 ) THEN
1744	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1745	DO i = 1, max_pr_cs
1746	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+i,0), &
1747	sums(nzb,pr_palm+max_pr_user+i), &
1748	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
1749	ENDDO
1750	ENDIF
1751
1752	IF ( salsa .AND. max_pr_salsa > 0 ) THEN
1753	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1754	DO i = 1, max_pr_salsa
1755	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+max_pr_cs+i,0), &
1756	sums(nzb,pr_palm+max_pr_user+max_pr_user+i), &
1757	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
1758	ENDDO
1759	ENDIF
1760
1761	#else
1762	sums = sums_l(:,:,0)
1763	IF ( large_scale_forcing ) THEN
1764	sums(:,81:88) = sums_ls_l
1765	ENDIF
1766	#endif
1767
1768	!
1769	!-- Final values are obtained by division by the total number of grid points
1770	!-- used for summation. After that store profiles.
1771	!-- Check, if statistical regions do contain at least one grid point at the
1772	!-- respective k-level, otherwise division by zero will lead to undefined
1773	!-- values, which may cause e.g. problems with NetCDF output
1774	!-- Profiles:
1775	DO k = nzb, nzt+1
1776	sums(k,3) = sums(k,3) / ngp_2dh(sr)
1777	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
1778	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
1779	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
1780	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
1781	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
1782	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
1783	sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
1784	sums(k,114) = sums(k,114) / ngp_2dh(sr)
1785	sums(k,117) = sums(k,117) / ngp_2dh(sr)
1786	IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
1787	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
1788	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
1789	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
1790	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
1791	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
1792	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
1793	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
1794	sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
1795	sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
1796	sums(k,123) = sums(k,123) * ngp_2dh_s_inner(k,sr) / ngp_2dh(sr)
1797	ENDIF
1798	ENDDO
1799
1800	!-- u* and so on
1801	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
1802	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
1803	!-- above the topography, they are being divided by ngp_2dh(sr)
1804	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
1805	ngp_2dh(sr)
1806	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
1807	ngp_2dh(sr)
1808	sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
1809	ngp_2dh(sr)
1810	sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
1811	ngp_2dh(sr)
1812	!-- eges, e*
1813	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
1814	ngp_3d(sr)
1815	!-- Old and new divergence
1816	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
1817	ngp_3d_inner(sr)
1818
1819	!-- User-defined profiles
1820	IF ( max_pr_user > 0 ) THEN
1821	DO k = nzb, nzt+1
1822	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
1823	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
1824	ngp_2dh_s_inner(k,sr)
1825	ENDDO
1826	ENDIF
1827
1828	IF ( air_chemistry ) THEN
1829	IF ( max_pr_cs > 0 ) THEN
1830	DO k = nzb, nzt+1
1831	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) = &
1832	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) / &
1833	ngp_2dh_s_inner(k,sr)
1834	ENDDO
1835	ENDIF
1836	ENDIF
1837
1838	IF ( salsa ) THEN
1839	IF ( max_pr_salsa > 0 ) THEN
1840	DO k = nzb, nzt+1
1841	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) = &
1842	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) &
1843	/ ngp_2dh_s_inner(k,sr)
1844	ENDDO
1845	ENDIF
1846	ENDIF
1847
1848	!
1849	!-- Collect horizontal average in hom.
1850	!-- Compute deduced averages (e.g. total heat flux)
1851	hom(:,1,3,sr) = sums(:,3) ! w
1852	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
1853	hom(:,1,9,sr) = sums(:,9) ! km
1854	hom(:,1,10,sr) = sums(:,10) ! kh
1855	hom(:,1,11,sr) = sums(:,11) ! l
1856	hom(:,1,12,sr) = sums(:,12) ! w"u"
1857	hom(:,1,13,sr) = sums(:,13) ! wu
1858	hom(:,1,14,sr) = sums(:,14) ! w"v"
1859	hom(:,1,15,sr) = sums(:,15) ! wv
1860	hom(:,1,16,sr) = sums(:,16) ! w"pt"
1861	hom(:,1,17,sr) = sums(:,17) ! wpt
1862	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
1863	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
1864	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
1865	hom(:,1,21,sr) = sums(:,21) ! wptBC
1866	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
1867	! profile 24 is initial profile (sa)
1868	! profiles 25-29 left empty for initial
1869	! profiles
1870	hom(:,1,30,sr) = sums(:,30) ! u*2
1871	hom(:,1,31,sr) = sums(:,31) ! v*2
1872	hom(:,1,32,sr) = sums(:,32) ! w*2
1873	hom(:,1,33,sr) = sums(:,33) ! pt*2
1874	hom(:,1,34,sr) = sums(:,34) ! e*
1875	hom(:,1,35,sr) = sums(:,35) ! w2pt
1876	hom(:,1,36,sr) = sums(:,36) ! wpt2
1877	hom(:,1,37,sr) = sums(:,37) ! we
1878	hom(:,1,38,sr) = sums(:,38) ! w*3
1879	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
1880	hom(:,1,40,sr) = sums(:,40) ! p
1881	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
1882	hom(:,1,46,sr) = sums(:,46) ! wvpt
1883	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
1884	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
1885	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
1886	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
1887	hom(:,1,51,sr) = sums(:,51) ! w"qv"
1888	hom(:,1,52,sr) = sums(:,52) ! wqv
1889	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
1890	hom(:,1,54,sr) = sums(:,54) ! ql
1891	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
1892	hom(:,1,56,sr) = sums(:,56) ! wp/dz
1893	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
1894	hom(:,1,58,sr) = sums(:,58) ! u"pt"
1895	hom(:,1,59,sr) = sums(:,59) ! upt
1896	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
1897	hom(:,1,61,sr) = sums(:,61) ! v"pt"
1898	hom(:,1,62,sr) = sums(:,62) ! vpt
1899	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
1900	hom(:,1,64,sr) = sums(:,64) ! rho_ocean
1901	hom(:,1,65,sr) = sums(:,65) ! w"sa"
1902	hom(:,1,66,sr) = sums(:,66) ! wsa
1903	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
1904	hom(:,1,68,sr) = sums(:,68) ! wp
1905	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
1906	hom(:,1,70,sr) = sums(:,70) ! q*2
1907	hom(:,1,71,sr) = sums(:,71) ! prho
1908	hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
1909	hom(:,1,123,sr) = sums(:,123) ! nc
1910	hom(:,1,73,sr) = sums(:,73) ! nr
1911	hom(:,1,74,sr) = sums(:,74) ! qr
1912	hom(:,1,75,sr) = sums(:,75) ! qc
1913	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
1914	! 77 is initial density profile
1915	hom(:,1,78,sr) = ug ! ug
1916	hom(:,1,79,sr) = vg ! vg
1917	hom(:,1,80,sr) = w_subs ! w_subs
1918
1919	IF ( large_scale_forcing ) THEN
1920	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
1921	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
1922	IF ( use_subsidence_tendencies ) THEN
1923	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
1924	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
1925	ELSE
1926	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
1927	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
1928	ENDIF
1929	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
1930	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
1931	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
1932	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
1933	ENDIF
1934
1935	IF ( land_surface ) THEN
1936	hom(:,1,89,sr) = sums(:,89) ! t_soil
1937	! 90 is initial t_soil profile
1938	hom(:,1,91,sr) = sums(:,91) ! m_soil
1939	! 92 is initial m_soil profile
1940	hom(:,1,93,sr) = sums(:,93) ! ghf
1941	hom(:,1,94,sr) = sums(:,94) ! qsws_liq
1942	hom(:,1,95,sr) = sums(:,95) ! qsws_soil
1943	hom(:,1,96,sr) = sums(:,96) ! qsws_veg
1944	hom(:,1,97,sr) = sums(:,97) ! r_a
1945	hom(:,1,98,sr) = sums(:,98) ! r_s
1946
1947	ENDIF
1948
1949	IF ( radiation ) THEN
1950	hom(:,1,99,sr) = sums(:,99) ! rad_net
1951	hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
1952	hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
1953	hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
1954	hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
1955
1956	IF ( radiation_scheme == 'rrtmg' ) THEN
1957	hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
1958	hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
1959	hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
1960	hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
1961
1962	hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
1963	hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
1964	hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
1965	hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
1966	ENDIF
1967	ENDIF
1968
1969	hom(:,1,112,sr) = sums(:,112) !: L
1970
1971	IF ( passive_scalar ) THEN
1972	hom(:,1,117,sr) = sums(:,117) ! w"s"
1973	hom(:,1,114,sr) = sums(:,114) ! ws
1974	hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
1975	hom(:,1,116,sr) = sums(:,116) ! s*2
1976	ENDIF
1977
1978	hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
1979	hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
1980
1981	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
1982	! u, w'u', w'v', t (in last profile)
1983
1984	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
1985	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
1986	sums(:,pr_palm+1:pr_palm+max_pr_user)
1987	ENDIF
1988
1989	IF ( air_chemistry ) THEN
1990	IF ( max_pr_cs > 0 ) THEN ! chem_spcs profiles
1991	hom(:, 1, pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs, sr) = &
1992	sums(:, pr_palm+max_pr_user+1:pr_palm+max_pr_user+max_pr_cs)
1993	ENDIF
1994	ENDIF
1995
1996	IF ( salsa ) THEN
1997	IF ( max_pr_salsa > 0 ) THEN ! salsa profiles
1998	hom(:,1,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa, sr) = &
1999	sums(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa)
2000	ENDIF
2001	ENDIF
2002	!
2003	!-- Determine the boundary layer height using two different schemes.
2004	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
2005	!-- first relative minimum (maximum) of the total heat flux.
2006	!-- The corresponding height is assumed as the boundary layer height, if it
2007	!-- is less than 1.5 times the height where the heat flux becomes negative
2008	!-- (positive) for the first time. Attention: the resolved vertical sensible
2009	!-- heat flux (hom(:,1,17,sr) = wpt) is not known at the beginning because
2010	!-- the calculation happens in advec_s_ws which is called after
2011	!-- flow_statistics. Therefore z_i is directly taken from restart data at
2012	!-- the beginning of restart runs.
2013	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .OR. &
2014	simulated_time_at_begin /= simulated_time ) THEN
2015
2016	z_i(1) = 0.0_wp
2017	first = .TRUE.
2018
2019	IF ( ocean_mode ) THEN
2020	DO k = nzt, nzb+1, -1
2021	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
2022	first = .FALSE.
2023	height = zw(k)
2024	ENDIF
2025	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
2026	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
2027	IF ( zw(k) < 1.5_wp * height ) THEN
2028	z_i(1) = zw(k)
2029	ELSE
2030	z_i(1) = height
2031	ENDIF
2032	EXIT
2033	ENDIF
2034	ENDDO
2035	ELSE
2036	DO k = nzb, nzt-1
2037	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
2038	first = .FALSE.
2039	height = zw(k)
2040	ENDIF
2041	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
2042	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
2043	IF ( zw(k) < 1.5_wp * height ) THEN
2044	z_i(1) = zw(k)
2045	ELSE
2046	z_i(1) = height
2047	ENDIF
2048	EXIT
2049	ENDIF
2050	ENDDO
2051	ENDIF
2052
2053	!
2054	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
2055	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
2056	!-- maximal local temperature gradient: starting from the second (the
2057	!-- last but one) vertical gridpoint, the local gradient must be at least
2058	!-- 0.2K/100m and greater than the next four gradients.
2059	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
2060	!-- ocean case!
2061	z_i(2) = 0.0_wp
2062	DO k = nzb+1, nzt+1
2063	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
2064	ENDDO
2065	dptdz_threshold = 0.2_wp / 100.0_wp
2066
2067	IF ( ocean_mode ) THEN
2068	DO k = nzt+1, nzb+5, -1
2069	IF ( dptdz(k) > dptdz_threshold .AND. &
2070	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND.&
2071	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
2072	z_i(2) = zw(k-1)
2073	EXIT
2074	ENDIF
2075	ENDDO
2076	ELSE
2077	DO k = nzb+1, nzt-3
2078	IF ( dptdz(k) > dptdz_threshold .AND. &
2079	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND.&
2080	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
2081	z_i(2) = zw(k-1)
2082	EXIT
2083	ENDIF
2084	ENDDO
2085	ENDIF
2086
2087	ENDIF
2088
2089	hom(nzb+6,1,pr_palm,sr) = z_i(1)
2090	hom(nzb+7,1,pr_palm,sr) = z_i(2)
2091
2092	!
2093	!-- Determine vertical index which is nearest to the mean surface level
2094	!-- height of the respective statistic region
2095	DO k = nzb, nzt
2096	IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
2097	k_surface_level = k
2098	EXIT
2099	ENDIF
2100	ENDDO
2101
2102	!
2103	!-- Computation of both the characteristic vertical velocity and
2104	!-- the characteristic convective boundary layer temperature.
2105	!-- The inversion height entering into the equation is defined with respect
2106	!-- to the mean surface level height of the respective statistic region.
2107	!-- The horizontal average at surface level index + 1 is input for the
2108	!-- average temperature.
2109	IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
2110	THEN
2111	hom(nzb+8,1,pr_palm,sr) = &
2112	( g / hom(k_surface_level+1,1,4,sr) * &
2113	( hom(k_surface_level,1,18,sr) / &
2114	( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
2115	* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
2116	ELSE
2117	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
2118	ENDIF
2119
2120	!
2121	!-- Collect the time series quantities. Please note, timeseries quantities
2122	!-- which are collected from horizontally averaged profiles, e.g. wpt
2123	!-- or pt(zp), are treated specially. In case of elevated model surfaces,
2124	!-- index nzb+1 might be within topography and data will be zero. Therefore,
2125	!-- take value for the first atmosphere index, which is topo_min_level+1.
2126	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
2127	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
2128	ts_value(3,sr) = dt_3d
2129	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
2130	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
2131	ts_value(6,sr) = u_max
2132	ts_value(7,sr) = v_max
2133	ts_value(8,sr) = w_max
2134	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
2135	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
2136	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
2137	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
2138	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
2139	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
2140	ts_value(15,sr) = hom(topo_min_level+1,1,16,sr) ! w'pt' at k=1
2141	ts_value(16,sr) = hom(topo_min_level+1,1,18,sr) ! wpt at k=1
2142	ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
2143	ts_value(18,sr) = hom(topo_min_level+1,1,4,sr) ! pt(zp)
2144	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
2145	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
2146	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
2147
2148	IF ( .NOT. neutral ) THEN
2149	ts_value(22,sr) = hom(nzb,1,112,sr) ! L
2150	ELSE
2151	ts_value(22,sr) = 1.0E10_wp
2152	ENDIF
2153
2154	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
2155
2156	IF ( passive_scalar ) THEN
2157	ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
2158	ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
2159	ENDIF
2160
2161	!
2162	!-- Collect land surface model timeseries
2163	IF ( land_surface ) THEN
2164	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
2165	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
2166	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
2167	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
2168	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
2169	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
2170	ENDIF
2171	!
2172	!-- Collect radiation model timeseries
2173	IF ( radiation ) THEN
2174	ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
2175	ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
2176	ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
2177	ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
2178	ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
2179
2180	IF ( radiation_scheme == 'rrtmg' ) THEN
2181	ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
2182	ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
2183	ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
2184	ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
2185	ENDIF
2186
2187	ENDIF
2188
2189	!
2190	!-- Calculate additional statistics provided by other modules
2191	CALL module_interface_statistics( 'time_series', sr, 0, dots_max )
2192
2193	ENDDO ! loop of the subregions
2194
2195	!
2196	!-- If required, sum up horizontal averages for subsequent time averaging.
2197	!-- Do not sum, if flow statistics is called before the first initial time step.
2198	IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
2199	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
2200	hom_sum = hom_sum + hom(:,1,:,:)
2201	average_count_pr = average_count_pr + 1
2202	do_sum = .FALSE.
2203	ENDIF
2204
2205	!
2206	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
2207	!-- This flag is reset after each time step in time_integration.
2208	flow_statistics_called = .TRUE.
2209
2210	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
2211
2212
2213	END SUBROUTINE flow_statistics

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |