Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 1587

Last change on this file since 1587 was 1586, checked in by maronga, 10 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 142.4 KB

Line
1	#if ! defined( __openacc )
2	SUBROUTINE flow_statistics
3
4	!--------------------------------------------------------------------------------!
5	! This file is part of PALM.
6	!
7	! PALM is free software: you can redistribute it and/or modify it under the terms
8	! of the GNU General Public License as published by the Free Software Foundation,
9	! either version 3 of the License, or (at your option) any later version.
10	!
11	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
12	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
13	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
14	!
15	! You should have received a copy of the GNU General Public License along with
16	! PALM. If not, see <http://www.gnu.org/licenses/>.
17	!
18	! Copyright 1997-2014 Leibniz Universitaet Hannover
19	!--------------------------------------------------------------------------------!
20	!
21	! Current revisions:
22	! -----------------
23	!
24	!
25	! Former revisions:
26	! -----------------
27	! $Id: flow_statistics.f90 1586 2015-04-30 07:11:33Z maronga $
28	!
29	! 1585 2015-04-30 07:05:52Z maronga
30	! Added output of timeseries and profiles for RRTMG
31	!
32	! 1571 2015-03-12 16:12:49Z maronga
33	! Bugfix: output of rad_net and rad_sw_in
34	!
35	! 1567 2015-03-10 17:57:55Z suehring
36	! Reverse modifications made for monotonic limiter.
37	!
38	! 1557 2015-03-05 16:43:04Z suehring
39	! Adjustments for monotonic limiter
40	!
41	! 1555 2015-03-04 17:44:27Z maronga
42	! Added output of r_a and r_s.
43	!
44	! 1551 2015-03-03 14:18:16Z maronga
45	! Added suppport for land surface model and radiation model output.
46	!
47	! 1498 2014-12-03 14:09:51Z suehring
48	! Comments added
49	!
50	! 1482 2014-10-18 12:34:45Z raasch
51	! missing ngp_sums_ls added in accelerator version
52	!
53	! 1450 2014-08-21 07:31:51Z heinze
54	! bugfix: calculate fac only for simulated_time >= 0.0
55	!
56	! 1396 2014-05-06 13:37:41Z raasch
57	! bugfix: "copyin" replaced by "update device" in openacc-branch
58	!
59	! 1386 2014-05-05 13:55:30Z boeske
60	! bugfix: simulated time before the last timestep is needed for the correct
61	! calculation of the profiles of large scale forcing tendencies
62	!
63	! 1382 2014-04-30 12:15:41Z boeske
64	! Renamed variables which store large scale forcing tendencies
65	! pt_lsa -> td_lsa_lpt, pt_subs -> td_sub_lpt,
66	! q_lsa -> td_lsa_q, q_subs -> td_sub_q,
67	! added Neumann boundary conditions for profile data output of large scale
68	! advection and subsidence terms at nzt+1
69	!
70	! 1374 2014-04-25 12:55:07Z raasch
71	! bugfix: syntax errors removed from openacc-branch
72	! missing variables added to ONLY-lists
73	!
74	! 1365 2014-04-22 15:03:56Z boeske
75	! Output of large scale advection, large scale subsidence and nudging tendencies
76	! +sums_ls_l, ngp_sums_ls, use_subsidence_tendencies
77	!
78	! 1353 2014-04-08 15:21:23Z heinze
79	! REAL constants provided with KIND-attribute
80	!
81	! 1322 2014-03-20 16:38:49Z raasch
82	! REAL constants defined as wp-kind
83	!
84	! 1320 2014-03-20 08:40:49Z raasch
85	! ONLY-attribute added to USE-statements,
86	! kind-parameters added to all INTEGER and REAL declaration statements,
87	! kinds are defined in new module kinds,
88	! revision history before 2012 removed,
89	! comment fields (!:) to be used for variable explanations added to
90	! all variable declaration statements
91	!
92	! 1299 2014-03-06 13:15:21Z heinze
93	! Output of large scale vertical velocity w_subs
94	!
95	! 1257 2013-11-08 15:18:40Z raasch
96	! openacc "end parallel" replaced by "end parallel loop"
97	!
98	! 1241 2013-10-30 11:36:58Z heinze
99	! Output of ug and vg
100	!
101	! 1221 2013-09-10 08:59:13Z raasch
102	! ported for openACC in separate #else branch
103	!
104	! 1179 2013-06-14 05:57:58Z raasch
105	! comment for profile 77 added
106	!
107	! 1115 2013-03-26 18:16:16Z hoffmann
108	! ql is calculated by calc_liquid_water_content
109	!
110	! 1111 2013-03-08 23:54:10Z raasch
111	! openACC directive added
112	!
113	! 1053 2012-11-13 17:11:03Z hoffmann
114	! additions for two-moment cloud physics scheme:
115	! +nr, qr, qc, prr
116	!
117	! 1036 2012-10-22 13:43:42Z raasch
118	! code put under GPL (PALM 3.9)
119	!
120	! 1007 2012-09-19 14:30:36Z franke
121	! Calculation of buoyancy flux for humidity in case of WS-scheme is now using
122	! turbulent fluxes of WS-scheme
123	! Bugfix: Calculation of subgridscale buoyancy flux for humidity and cloud
124	! droplets at nzb and nzt added
125	!
126	! 801 2012-01-10 17:30:36Z suehring
127	! Calculation of turbulent fluxes in advec_ws is now thread-safe.
128	!
129	! Revision 1.1 1997/08/11 06:15:17 raasch
130	! Initial revision
131	!
132	!
133	! Description:
134	! ------------
135	! Compute average profiles and further average flow quantities for the different
136	! user-defined (sub-)regions. The region indexed 0 is the total model domain.
137	!
138	! NOTE: For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
139	! ---- lower vertical index for k-loops for all variables, although strictly
140	! speaking the k-loops would have to be split up according to the staggered
141	! grid. However, this implies no error since staggered velocity components are
142	! zero at the walls and inside buildings.
143	!------------------------------------------------------------------------------!
144
145	USE arrays_3d, &
146	ONLY: ddzu, ddzw, e, hyp, km, kh, nr, p, prho, pt, q, qc, ql, qr, qs, &
147	qsws, qswst, rho, sa, saswsb, saswst, shf, td_lsa_lpt, td_lsa_q,&
148	td_sub_lpt, td_sub_q, time_vert, ts, tswst, u, ug, us, usws, &
149	uswst, vsws, v, vg, vpt, vswst, w, w_subs, zw
150
151	USE cloud_parameters, &
152	ONLY: l_d_cp, prr, pt_d_t
153
154	USE control_parameters, &
155	ONLY: average_count_pr, cloud_droplets, cloud_physics, do_sum, &
156	dt_3d, g, humidity, icloud_scheme, kappa, large_scale_forcing, &
157	large_scale_subsidence, max_pr_user, message_string, ocean, &
158	passive_scalar, precipitation, simulated_time, &
159	use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
160	ws_scheme_mom, ws_scheme_sca
161
162	USE cpulog, &
163	ONLY: cpu_log, log_point
164
165	USE grid_variables, &
166	ONLY: ddx, ddy
167
168	USE indices, &
169	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, ngp_sums, &
170	ngp_sums_ls, nxl, nxr, nyn, nys, nzb, nzb_diff_s_inner, &
171	nzb_s_inner, nzt, nzt_diff
172
173	USE kinds
174
175	USE land_surface_model_mod, &
176	ONLY: dots_soil, ghf_eb, land_surface, m_soil, nzb_soil, nzt_soil, &
177	qsws_eb, qsws_liq_eb, qsws_soil_eb, qsws_veg_eb, r_a, r_s, &
178	shf_eb, t_soil
179
180	USE pegrid
181
182	USE radiation_model_mod, &
183	ONLY: dots_rad, radiation, radiation_scheme, rad_net, &
184	rad_lw_in, rad_lw_out, rad_sw_in, rad_sw_out
185
186	#if defined ( __rrtmg )
187	USE radiation_model_mod, &
188	ONLY: rrtm_aldif, rrtm_aldir, rrtm_asdif, rrtm_asdir
189	#endif
190
191	USE statistics
192
193	IMPLICIT NONE
194
195	INTEGER(iwp) :: i !:
196	INTEGER(iwp) :: j !:
197	INTEGER(iwp) :: k !:
198	INTEGER(iwp) :: nt !:
199	INTEGER(iwp) :: omp_get_thread_num !:
200	INTEGER(iwp) :: sr !:
201	INTEGER(iwp) :: tn !:
202
203	LOGICAL :: first !:
204
205	REAL(wp) :: dptdz_threshold !:
206	REAL(wp) :: fac !:
207	REAL(wp) :: height !:
208	REAL(wp) :: pts !:
209	REAL(wp) :: sums_l_eper !:
210	REAL(wp) :: sums_l_etot !:
211	REAL(wp) :: ust !:
212	REAL(wp) :: ust2 !:
213	REAL(wp) :: u2 !:
214	REAL(wp) :: vst !:
215	REAL(wp) :: vst2 !:
216	REAL(wp) :: v2 !:
217	REAL(wp) :: w2 !:
218	REAL(wp) :: z_i(2) !:
219
220	REAL(wp) :: dptdz(nzb+1:nzt+1) !:
221	REAL(wp) :: sums_ll(nzb:nzt+1,2) !:
222
223	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
224
225	!$acc update host( km, kh, e, pt, qs, qsws, rif, shf, ts, u, usws, v, vsws, w )
226
227	!
228	!-- To be on the safe side, check whether flow_statistics has already been
229	!-- called once after the current time step
230	IF ( flow_statistics_called ) THEN
231
232	message_string = 'flow_statistics is called two times within one ' // &
233	'timestep'
234	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
235
236	ENDIF
237
238	!
239	!-- Compute statistics for each (sub-)region
240	DO sr = 0, statistic_regions
241
242	!
243	!-- Initialize (local) summation array
244	sums_l = 0.0_wp
245
246	!
247	!-- Store sums that have been computed in other subroutines in summation
248	!-- array
249	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
250	!-- WARNING: next line still has to be adjusted for OpenMP
251	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) ! heat flux from advec_s_bc
252	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
253	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
254
255	!
256	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
257	!-- scale) vertical fluxes and velocity variances by using commonly-
258	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
259	!-- in combination with the 5th order advection scheme, pronounced
260	!-- artificial kinks could be observed in the vertical profiles near the
261	!-- surface. Please note: these kinks were not related to the model truth,
262	!-- i.e. these kinks are just related to an evaluation problem.
263	!-- In order avoid these kinks, vertical fluxes and horizontal as well
264	!-- vertical velocity variances are calculated directly within the advection
265	!-- routines, according to the numerical discretization, to evaluate the
266	!-- statistical quantities as they will appear within the prognostic
267	!-- equations.
268	!-- Copy the turbulent quantities, evaluated in the advection routines to
269	!-- the local array sums_l() for further computations.
270	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
271
272	!
273	!-- According to the Neumann bc for the horizontal velocity components,
274	!-- the corresponding fluxes has to satisfiy the same bc.
275	IF ( ocean ) THEN
276	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
277	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
278	ENDIF
279
280	DO i = 0, threads_per_task-1
281	!
282	!-- Swap the turbulent quantities evaluated in advec_ws.
283	sums_l(:,13,i) = sums_wsus_ws_l(:,i) ! wu
284	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) ! wv
285	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
286	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
287	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
288	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
289	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
290	sums_ws2_ws_l(:,i) ) ! e*
291	DO k = nzb, nzt
292	sums_l(nzb+5,pr_palm,i) = sums_l(nzb+5,pr_palm,i) + 0.5_wp * ( &
293	sums_us2_ws_l(k,i) + &
294	sums_vs2_ws_l(k,i) + &
295	sums_ws2_ws_l(k,i) )
296	ENDDO
297	ENDDO
298
299	ENDIF
300
301	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
302
303	DO i = 0, threads_per_task-1
304	sums_l(:,17,i) = sums_wspts_ws_l(:,i) ! wpt from advec_s_ws
305	IF ( ocean ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
306	IF ( humidity .OR. passive_scalar ) sums_l(:,49,i) = &
307	sums_wsqs_ws_l(:,i) !wq
308	ENDDO
309
310	ENDIF
311	!
312	!-- Horizontally averaged profiles of horizontal velocities and temperature.
313	!-- They must have been computed before, because they are already required
314	!-- for other horizontal averages.
315	tn = 0
316
317	!$OMP PARALLEL PRIVATE( i, j, k, tn )
318	#if defined( __intel_openmp_bug )
319	tn = omp_get_thread_num()
320	#else
321	!$ tn = omp_get_thread_num()
322	#endif
323
324	!$OMP DO
325	DO i = nxl, nxr
326	DO j = nys, nyn
327	DO k = nzb_s_inner(j,i), nzt+1
328	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr)
329	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr)
330	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr)
331	ENDDO
332	ENDDO
333	ENDDO
334
335	!
336	!-- Horizontally averaged profile of salinity
337	IF ( ocean ) THEN
338	!$OMP DO
339	DO i = nxl, nxr
340	DO j = nys, nyn
341	DO k = nzb_s_inner(j,i), nzt+1
342	sums_l(k,23,tn) = sums_l(k,23,tn) + &
343	sa(k,j,i) * rmask(j,i,sr)
344	ENDDO
345	ENDDO
346	ENDDO
347	ENDIF
348
349	!
350	!-- Horizontally averaged profiles of virtual potential temperature,
351	!-- total water content, specific humidity and liquid water potential
352	!-- temperature
353	IF ( humidity ) THEN
354	!$OMP DO
355	DO i = nxl, nxr
356	DO j = nys, nyn
357	DO k = nzb_s_inner(j,i), nzt+1
358	sums_l(k,44,tn) = sums_l(k,44,tn) + &
359	vpt(k,j,i) * rmask(j,i,sr)
360	sums_l(k,41,tn) = sums_l(k,41,tn) + &
361	q(k,j,i) * rmask(j,i,sr)
362	ENDDO
363	ENDDO
364	ENDDO
365	IF ( cloud_physics ) THEN
366	!$OMP DO
367	DO i = nxl, nxr
368	DO j = nys, nyn
369	DO k = nzb_s_inner(j,i), nzt+1
370	sums_l(k,42,tn) = sums_l(k,42,tn) + &
371	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr)
372	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
373	pt(k,j,i) + l_d_cppt_d_t(k) ql(k,j,i) &
374	) * rmask(j,i,sr)
375	ENDDO
376	ENDDO
377	ENDDO
378	ENDIF
379	ENDIF
380
381	!
382	!-- Horizontally averaged profiles of passive scalar
383	IF ( passive_scalar ) THEN
384	!$OMP DO
385	DO i = nxl, nxr
386	DO j = nys, nyn
387	DO k = nzb_s_inner(j,i), nzt+1
388	sums_l(k,41,tn) = sums_l(k,41,tn) + q(k,j,i) * rmask(j,i,sr)
389	ENDDO
390	ENDDO
391	ENDDO
392	ENDIF
393	!$OMP END PARALLEL
394	!
395	!-- Summation of thread sums
396	IF ( threads_per_task > 1 ) THEN
397	DO i = 1, threads_per_task-1
398	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
399	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
400	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
401	IF ( ocean ) THEN
402	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
403	ENDIF
404	IF ( humidity ) THEN
405	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
406	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
407	IF ( cloud_physics ) THEN
408	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
409	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
410	ENDIF
411	ENDIF
412	IF ( passive_scalar ) THEN
413	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
414	ENDIF
415	ENDDO
416	ENDIF
417
418	#if defined( __parallel )
419	!
420	!-- Compute total sum from local sums
421	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
422	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
423	MPI_SUM, comm2d, ierr )
424	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
425	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
426	MPI_SUM, comm2d, ierr )
427	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
428	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
429	MPI_SUM, comm2d, ierr )
430	IF ( ocean ) THEN
431	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
432	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
433	MPI_REAL, MPI_SUM, comm2d, ierr )
434	ENDIF
435	IF ( humidity ) THEN
436	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
437	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
438	MPI_REAL, MPI_SUM, comm2d, ierr )
439	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
440	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
441	MPI_REAL, MPI_SUM, comm2d, ierr )
442	IF ( cloud_physics ) THEN
443	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
444	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
445	MPI_REAL, MPI_SUM, comm2d, ierr )
446	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
447	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
448	MPI_REAL, MPI_SUM, comm2d, ierr )
449	ENDIF
450	ENDIF
451
452	IF ( passive_scalar ) THEN
453	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
454	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
455	MPI_REAL, MPI_SUM, comm2d, ierr )
456	ENDIF
457	#else
458	sums(:,1) = sums_l(:,1,0)
459	sums(:,2) = sums_l(:,2,0)
460	sums(:,4) = sums_l(:,4,0)
461	IF ( ocean ) sums(:,23) = sums_l(:,23,0)
462	IF ( humidity ) THEN
463	sums(:,44) = sums_l(:,44,0)
464	sums(:,41) = sums_l(:,41,0)
465	IF ( cloud_physics ) THEN
466	sums(:,42) = sums_l(:,42,0)
467	sums(:,43) = sums_l(:,43,0)
468	ENDIF
469	ENDIF
470	IF ( passive_scalar ) sums(:,41) = sums_l(:,41,0)
471	#endif
472
473	!
474	!-- Final values are obtained by division by the total number of grid points
475	!-- used for summation. After that store profiles.
476	sums(:,1) = sums(:,1) / ngp_2dh(sr)
477	sums(:,2) = sums(:,2) / ngp_2dh(sr)
478	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
479	hom(:,1,1,sr) = sums(:,1) ! u
480	hom(:,1,2,sr) = sums(:,2) ! v
481	hom(:,1,4,sr) = sums(:,4) ! pt
482
483
484	!
485	!-- Salinity
486	IF ( ocean ) THEN
487	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
488	hom(:,1,23,sr) = sums(:,23) ! sa
489	ENDIF
490
491	!
492	!-- Humidity and cloud parameters
493	IF ( humidity ) THEN
494	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
495	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
496	hom(:,1,44,sr) = sums(:,44) ! vpt
497	hom(:,1,41,sr) = sums(:,41) ! qv (q)
498	IF ( cloud_physics ) THEN
499	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
500	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
501	hom(:,1,42,sr) = sums(:,42) ! qv
502	hom(:,1,43,sr) = sums(:,43) ! pt
503	ENDIF
504	ENDIF
505
506	!
507	!-- Passive scalar
508	IF ( passive_scalar ) hom(:,1,41,sr) = sums(:,41) / &
509	ngp_2dh_s_inner(:,sr) ! s (q)
510
511	!
512	!-- Horizontally averaged profiles of the remaining prognostic variables,
513	!-- variances, the total and the perturbation energy (single values in last
514	!-- column of sums_l) and some diagnostic quantities.
515	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
516	!-- ---- speaking the following k-loop would have to be split up and
517	!-- rearranged according to the staggered grid.
518	!-- However, this implies no error since staggered velocity components
519	!-- are zero at the walls and inside buildings.
520	tn = 0
521	#if defined( __intel_openmp_bug )
522	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, sums_l_eper, sums_l_etot, &
523	!$OMP tn, ust, ust2, u2, vst, vst2, v2, w2 )
524	tn = omp_get_thread_num()
525	#else
526	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, sums_l_eper, sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, w2 )
527	!$ tn = omp_get_thread_num()
528	#endif
529	!$OMP DO
530	DO i = nxl, nxr
531	DO j = nys, nyn
532	sums_l_etot = 0.0_wp
533	DO k = nzb_s_inner(j,i), nzt+1
534	!
535	!-- Prognostic and diagnostic variables
536	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr)
537	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr)
538	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr)
539	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr)
540	sums_l(k,40,tn) = sums_l(k,40,tn) + p(k,j,i)
541
542	sums_l(k,33,tn) = sums_l(k,33,tn) + &
543	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)
544
545	IF ( humidity ) THEN
546	sums_l(k,70,tn) = sums_l(k,70,tn) + &
547	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)
548	ENDIF
549
550	!
551	!-- Higher moments
552	!-- (Computation of the skewness of w further below)
553	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr)
554
555	sums_l_etot = sums_l_etot + &
556	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
557	w(k,j,i)*2 ) rmask(j,i,sr)
558	ENDDO
559	!
560	!-- Total and perturbation energy for the total domain (being
561	!-- collected in the last column of sums_l). Summation of these
562	!-- quantities is seperated from the previous loop in order to
563	!-- allow vectorization of that loop.
564	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
565	!
566	!-- 2D-arrays (being collected in the last column of sums_l)
567	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
568	us(j,i) * rmask(j,i,sr)
569	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
570	usws(j,i) * rmask(j,i,sr)
571	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
572	vsws(j,i) * rmask(j,i,sr)
573	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
574	ts(j,i) * rmask(j,i,sr)
575	IF ( humidity ) THEN
576	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
577	qs(j,i) * rmask(j,i,sr)
578	ENDIF
579	ENDDO
580	ENDDO
581
582	!
583	!-- Computation of statistics when ws-scheme is not used. Else these
584	!-- quantities are evaluated in the advection routines.
585	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
586	!$OMP DO
587	DO i = nxl, nxr
588	DO j = nys, nyn
589	sums_l_eper = 0.0_wp
590	DO k = nzb_s_inner(j,i), nzt+1
591	u2 = u(k,j,i)**2
592	v2 = v(k,j,i)**2
593	w2 = w(k,j,i)**2
594	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
595	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
596
597	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr)
598	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr)
599	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr)
600	!
601	!-- Perturbation energy
602
603	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
604	( ust2 + vst2 + w2 ) * rmask(j,i,sr)
605	sums_l_eper = sums_l_eper + &
606	0.5_wp * ( ust2+vst2+w2 ) * rmask(j,i,sr)
607
608	ENDDO
609	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
610	+ sums_l_eper
611	ENDDO
612	ENDDO
613	ENDIF
614
615	!
616	!-- Horizontally averaged profiles of the vertical fluxes
617
618	!$OMP DO
619	DO i = nxl, nxr
620	DO j = nys, nyn
621	!
622	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
623	!-- oterwise from k=nzb+1)
624	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
625	!-- ---- strictly speaking the following k-loop would have to be
626	!-- split up according to the staggered grid.
627	!-- However, this implies no error since staggered velocity
628	!-- components are zero at the walls and inside buildings.
629
630	DO k = nzb_diff_s_inner(j,i)-1, nzt_diff
631	!
632	!-- Momentum flux w"u"
633	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
634	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
635	) * ( &
636	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
637	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
638	) * rmask(j,i,sr)
639	!
640	!-- Momentum flux w"v"
641	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
642	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
643	) * ( &
644	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
645	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
646	) * rmask(j,i,sr)
647	!
648	!-- Heat flux w"pt"
649	sums_l(k,16,tn) = sums_l(k,16,tn) &
650	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
651	* ( pt(k+1,j,i) - pt(k,j,i) ) &
652	* ddzu(k+1) * rmask(j,i,sr)
653
654
655	!
656	!-- Salinity flux w"sa"
657	IF ( ocean ) THEN
658	sums_l(k,65,tn) = sums_l(k,65,tn) &
659	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
660	* ( sa(k+1,j,i) - sa(k,j,i) ) &
661	* ddzu(k+1) * rmask(j,i,sr)
662	ENDIF
663
664	!
665	!-- Buoyancy flux, water flux (humidity flux) w"q"
666	IF ( humidity ) THEN
667	sums_l(k,45,tn) = sums_l(k,45,tn) &
668	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
669	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
670	* ddzu(k+1) * rmask(j,i,sr)
671	sums_l(k,48,tn) = sums_l(k,48,tn) &
672	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
673	* ( q(k+1,j,i) - q(k,j,i) ) &
674	* ddzu(k+1) * rmask(j,i,sr)
675
676	IF ( cloud_physics ) THEN
677	sums_l(k,51,tn) = sums_l(k,51,tn) &
678	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
679	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
680	- ( q(k,j,i) - ql(k,j,i) ) ) &
681	* ddzu(k+1) * rmask(j,i,sr)
682	ENDIF
683	ENDIF
684
685	!
686	!-- Passive scalar flux
687	IF ( passive_scalar ) THEN
688	sums_l(k,48,tn) = sums_l(k,48,tn) &
689	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
690	* ( q(k+1,j,i) - q(k,j,i) ) &
691	* ddzu(k+1) * rmask(j,i,sr)
692	ENDIF
693
694	ENDDO
695
696	!
697	!-- Subgridscale fluxes in the Prandtl layer
698	IF ( use_surface_fluxes ) THEN
699	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
700	usws(j,i) * rmask(j,i,sr) ! w"u"
701	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
702	vsws(j,i) * rmask(j,i,sr) ! w"v"
703	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
704	shf(j,i) * rmask(j,i,sr) ! w"pt"
705	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
706	0.0_wp * rmask(j,i,sr) ! u"pt"
707	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
708	0.0_wp * rmask(j,i,sr) ! v"pt"
709	IF ( ocean ) THEN
710	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
711	saswsb(j,i) * rmask(j,i,sr) ! w"sa"
712	ENDIF
713	IF ( humidity ) THEN
714	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
715	qsws(j,i) * rmask(j,i,sr) ! w"q" (w"qv")
716	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
717	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
718	shf(j,i) + 0.61_wp * pt(nzb,j,i) * &
719	qsws(j,i) )
720	IF ( cloud_droplets ) THEN
721	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
722	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
723	ql(nzb,j,i) ) * shf(j,i) + &
724	0.61_wp * pt(nzb,j,i) * qsws(j,i) )
725	ENDIF
726	IF ( cloud_physics ) THEN
727	!
728	!-- Formula does not work if ql(nzb) /= 0.0
729	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + & ! w"q" (w"qv")
730	qsws(j,i) * rmask(j,i,sr)
731	ENDIF
732	ENDIF
733	IF ( passive_scalar ) THEN
734	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
735	qsws(j,i) * rmask(j,i,sr) ! w"q" (w"qv")
736	ENDIF
737	ENDIF
738
739	IF ( land_surface ) THEN
740	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + ghf_eb(j,i)
741	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + shf_eb(j,i)
742	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + qsws_eb(j,i)
743	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + qsws_liq_eb(j,i)
744	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + qsws_soil_eb(j,i)
745	sums_l(nzb,98,tn) = sums_l(nzb,98,tn) + qsws_veg_eb(j,i)
746	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + r_a(j,i)
747	sums_l(nzb,100,tn) = sums_l(nzb,100,tn)+ r_s(j,i)
748	ENDIF
749
750	IF ( radiation ) THEN
751	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + rad_net(j,i)
752	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + rad_lw_in(nzb,j,i)
753	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + rad_lw_out(nzb,j,i)
754	sums_l(nzb,104,tn) = sums_l(nzb,104,tn) + rad_sw_in(nzb,j,i)
755	sums_l(nzb,105,tn) = sums_l(nzb,105,tn) + rad_sw_out(nzb,j,i)
756
757	#if defined ( __rrtmg )
758	IF ( radiation_scheme == 'rrtmg' ) THEN
759	sums_l(nzb,106,tn) = sums_l(nzb,106,tn) + rrtm_aldif(0,j,i)
760	sums_l(nzb,107,tn) = sums_l(nzb,107,tn) + rrtm_aldir(0,j,i)
761	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + rrtm_asdif(0,j,i)
762	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + rrtm_asdir(0,j,i)
763	ENDIF
764	#endif
765
766	ENDIF
767
768	!
769	!-- Subgridscale fluxes at the top surface
770	IF ( use_top_fluxes ) THEN
771	sums_l(nzt:nzt+1,12,tn) = sums_l(nzt:nzt+1,12,tn) + &
772	uswst(j,i) * rmask(j,i,sr) ! w"u"
773	sums_l(nzt:nzt+1,14,tn) = sums_l(nzt:nzt+1,14,tn) + &
774	vswst(j,i) * rmask(j,i,sr) ! w"v"
775	sums_l(nzt:nzt+1,16,tn) = sums_l(nzt:nzt+1,16,tn) + &
776	tswst(j,i) * rmask(j,i,sr) ! w"pt"
777	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
778	0.0_wp * rmask(j,i,sr) ! u"pt"
779	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
780	0.0_wp * rmask(j,i,sr) ! v"pt"
781
782	IF ( ocean ) THEN
783	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
784	saswst(j,i) * rmask(j,i,sr) ! w"sa"
785	ENDIF
786	IF ( humidity ) THEN
787	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
788	qswst(j,i) * rmask(j,i,sr) ! w"q" (w"qv")
789	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
790	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
791	tswst(j,i) + 0.61_wp * pt(nzt,j,i) * &
792	qswst(j,i) )
793	IF ( cloud_droplets ) THEN
794	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
795	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
796	ql(nzt,j,i) ) * tswst(j,i) + &
797	0.61_wp * pt(nzt,j,i) * qswst(j,i) )
798	ENDIF
799	IF ( cloud_physics ) THEN
800	!
801	!-- Formula does not work if ql(nzb) /= 0.0
802	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
803	qswst(j,i) * rmask(j,i,sr)
804	ENDIF
805	ENDIF
806	IF ( passive_scalar ) THEN
807	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
808	qswst(j,i) * rmask(j,i,sr) ! w"q" (w"qv")
809	ENDIF
810	ENDIF
811
812	!
813	!-- Resolved fluxes (can be computed for all horizontal points)
814	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
815	!-- ---- speaking the following k-loop would have to be split up and
816	!-- rearranged according to the staggered grid.
817	DO k = nzb_s_inner(j,i), nzt
818	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
819	u(k+1,j,i) - hom(k+1,1,1,sr) )
820	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
821	v(k+1,j,i) - hom(k+1,1,2,sr) )
822	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
823	pt(k+1,j,i) - hom(k+1,1,4,sr) )
824
825	!-- Higher moments
826	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
827	rmask(j,i,sr)
828	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
829	rmask(j,i,sr)
830
831	!
832	!-- Salinity flux and density (density does not belong to here,
833	!-- but so far there is no other suitable place to calculate)
834	IF ( ocean ) THEN
835	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
836	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
837	sa(k+1,j,i) - hom(k+1,1,23,sr) )
838	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
839	rmask(j,i,sr)
840	ENDIF
841	sums_l(k,64,tn) = sums_l(k,64,tn) + rho(k,j,i) * &
842	rmask(j,i,sr)
843	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
844	rmask(j,i,sr)
845	ENDIF
846
847	!
848	!-- Buoyancy flux, water flux, humidity flux, liquid water
849	!-- content, rain drop concentration and rain water content
850	IF ( humidity ) THEN
851	IF ( cloud_physics .OR. cloud_droplets ) THEN
852	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
853	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
854	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
855	rmask(j,i,sr)
856	IF ( .NOT. cloud_droplets ) THEN
857	pts = 0.5_wp * &
858	( ( q(k,j,i) - ql(k,j,i) ) - &
859	hom(k,1,42,sr) + &
860	( q(k+1,j,i) - ql(k+1,j,i) ) - &
861	hom(k+1,1,42,sr) )
862	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
863	rmask(j,i,sr)
864	IF ( icloud_scheme == 0 ) THEN
865	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * &
866	rmask(j,i,sr)
867	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
868	rmask(j,i,sr)
869	IF ( precipitation ) THEN
870	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
871	rmask(j,i,sr)
872	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
873	rmask(j,i,sr)
874	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) *&
875	rmask(j,i,sr)
876	ENDIF
877	ELSE
878	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * &
879	rmask(j,i,sr)
880	ENDIF
881	ELSE
882	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * &
883	rmask(j,i,sr)
884	ENDIF
885	ELSE
886	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
887	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
888	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
889	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
890	rmask(j,i,sr)
891	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
892	sums_l(k,46,tn) = ( 1.0_wp + 0.61_wp * &
893	hom(k,1,41,sr) ) * &
894	sums_l(k,17,tn) + &
895	0.61_wp * hom(k,1,4,sr) * &
896	sums_l(k,49,tn)
897	END IF
898	END IF
899	ENDIF
900	!
901	!-- Passive scalar flux
902	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
903	.OR. sr /= 0 ) ) THEN
904	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
905	q(k+1,j,i) - hom(k+1,1,41,sr) )
906	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
907	rmask(j,i,sr)
908	ENDIF
909
910	!
911	!-- Energy flux we
912	!-- has to be adjusted
913	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
914	( ust2 + vst2 + w(k,j,i)**2 ) &
915	* rmask(j,i,sr)
916	ENDDO
917	ENDDO
918	ENDDO
919	!
920	!-- For speed optimization fluxes which have been computed in part directly
921	!-- inside the WS advection routines are treated seperatly
922	!-- Momentum fluxes first:
923	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
924	!$OMP DO
925	DO i = nxl, nxr
926	DO j = nys, nyn
927	DO k = nzb_diff_s_inner(j,i)-1, nzt_diff
928	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
929	u(k+1,j,i) - hom(k+1,1,1,sr) )
930	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
931	v(k+1,j,i) - hom(k+1,1,2,sr) )
932	!
933	!-- Momentum flux wu
934	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
935	( w(k,j,i-1) + w(k,j,i) ) &
936	* ust * rmask(j,i,sr)
937	!
938	!-- Momentum flux wv
939	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
940	( w(k,j-1,i) + w(k,j,i) ) &
941	* vst * rmask(j,i,sr)
942	ENDDO
943	ENDDO
944	ENDDO
945
946	ENDIF
947	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
948	!$OMP DO
949	DO i = nxl, nxr
950	DO j = nys, nyn
951	DO k = nzb_diff_s_inner(j,i)-1, nzt_diff
952	!
953	!-- Vertical heat flux
954	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
955	( pt(k,j,i) - hom(k,1,4,sr) + &
956	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
957	* w(k,j,i) * rmask(j,i,sr)
958	IF ( humidity ) THEN
959	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
960	q(k+1,j,i) - hom(k+1,1,41,sr) )
961	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
962	rmask(j,i,sr)
963	ENDIF
964	ENDDO
965	ENDDO
966	ENDDO
967
968	ENDIF
969
970	!
971	!-- Density at top follows Neumann condition
972	IF ( ocean ) THEN
973	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
974	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
975	ENDIF
976
977	!
978	!-- Divergence of vertical flux of resolved scale energy and pressure
979	!-- fluctuations as well as flux of pressure fluctuation itself (68).
980	!-- First calculate the products, then the divergence.
981	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
982	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) THEN
983
984	sums_ll = 0.0_wp ! local array
985
986	!$OMP DO
987	DO i = nxl, nxr
988	DO j = nys, nyn
989	DO k = nzb_s_inner(j,i)+1, nzt
990
991	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
992	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) &
993	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) &
994	) )**2 &
995	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) &
996	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) &
997	) )**2 &
998	+ w(k,j,i)**2 )
999
1000	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
1001	* ( p(k,j,i) + p(k+1,j,i) )
1002
1003	ENDDO
1004	ENDDO
1005	ENDDO
1006	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
1007	sums_ll(nzt+1,1) = 0.0_wp
1008	sums_ll(0,2) = 0.0_wp
1009	sums_ll(nzt+1,2) = 0.0_wp
1010
1011	DO k = nzb+1, nzt
1012	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
1013	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
1014	sums_l(k,68,tn) = sums_ll(k,2)
1015	ENDDO
1016	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
1017	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
1018	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
1019
1020	ENDIF
1021
1022	!
1023	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
1024	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) THEN
1025
1026	!$OMP DO
1027	DO i = nxl, nxr
1028	DO j = nys, nyn
1029	DO k = nzb_s_inner(j,i)+1, nzt
1030
1031	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
1032	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
1033	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
1034	) * ddzw(k)
1035
1036	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
1037	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
1038	)
1039
1040	ENDDO
1041	ENDDO
1042	ENDDO
1043	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
1044	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
1045
1046	ENDIF
1047
1048	!
1049	!-- Horizontal heat fluxes (subgrid, resolved, total).
1050	!-- Do it only, if profiles shall be plotted.
1051	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
1052
1053	!$OMP DO
1054	DO i = nxl, nxr
1055	DO j = nys, nyn
1056	DO k = nzb_s_inner(j,i)+1, nzt
1057	!
1058	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
1059	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
1060	( kh(k,j,i) + kh(k,j,i-1) ) &
1061	* ( pt(k,j,i-1) - pt(k,j,i) ) &
1062	* ddx * rmask(j,i,sr)
1063	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
1064	( kh(k,j,i) + kh(k,j-1,i) ) &
1065	* ( pt(k,j-1,i) - pt(k,j,i) ) &
1066	* ddy * rmask(j,i,sr)
1067	!
1068	!-- Resolved horizontal heat fluxes upt, vpt
1069	sums_l(k,59,tn) = sums_l(k,59,tn) + &
1070	( u(k,j,i) - hom(k,1,1,sr) ) &
1071	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
1072	pt(k,j,i) - hom(k,1,4,sr) )
1073	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
1074	pt(k,j,i) - hom(k,1,4,sr) )
1075	sums_l(k,62,tn) = sums_l(k,62,tn) + &
1076	( v(k,j,i) - hom(k,1,2,sr) ) &
1077	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
1078	pt(k,j,i) - hom(k,1,4,sr) )
1079	ENDDO
1080	ENDDO
1081	ENDDO
1082	!
1083	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
1084	sums_l(nzb,58,tn) = 0.0_wp
1085	sums_l(nzb,59,tn) = 0.0_wp
1086	sums_l(nzb,60,tn) = 0.0_wp
1087	sums_l(nzb,61,tn) = 0.0_wp
1088	sums_l(nzb,62,tn) = 0.0_wp
1089	sums_l(nzb,63,tn) = 0.0_wp
1090
1091	ENDIF
1092
1093	!
1094	!-- Collect current large scale advection and subsidence tendencies for
1095	!-- data output
1096	IF ( large_scale_forcing .AND. ( simulated_time .GT. 0.0_wp ) ) THEN
1097	!
1098	!-- Interpolation in time of LSF_DATA
1099	nt = 1
1100	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
1101	nt = nt + 1
1102	ENDDO
1103	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
1104	nt = nt - 1
1105	ENDIF
1106
1107	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
1108	/ ( time_vert(nt+1)-time_vert(nt) )
1109
1110
1111	DO k = nzb, nzt
1112	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
1113	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
1114	sums_ls_l(k,1) = td_lsa_q(k,nt) &
1115	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
1116	ENDDO
1117
1118	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
1119	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
1120
1121	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
1122
1123	DO k = nzb, nzt
1124	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
1125	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
1126	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
1127	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
1128	ENDDO
1129
1130	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
1131	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
1132
1133	ENDIF
1134
1135	ENDIF
1136
1137
1138	IF ( land_surface ) THEN
1139	!$OMP DO
1140	DO i = nxl, nxr
1141	DO j = nys, nyn
1142	DO k = nzb_soil, nzt_soil
1143	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil(k,j,i) * rmask(j,i,sr)
1144	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil(k,j,i) * rmask(j,i,sr)
1145	ENDDO
1146	ENDDO
1147	ENDDO
1148	ENDIF
1149
1150	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
1151	!$OMP DO
1152	DO i = nxl, nxr
1153	DO j = nys, nyn
1154	DO k = nzb_s_inner(j,i)+1, nzt+1
1155	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_lw_in(k,j,i) * rmask(j,i,sr)
1156	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_lw_out(k,j,i) * rmask(j,i,sr)
1157	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_sw_in(k,j,i) * rmask(j,i,sr)
1158	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_sw_out(k,j,i) * rmask(j,i,sr)
1159	ENDDO
1160	ENDDO
1161	ENDDO
1162	ENDIF
1163	!
1164	!-- Calculate the user-defined profiles
1165	CALL user_statistics( 'profiles', sr, tn )
1166	!$OMP END PARALLEL
1167
1168	!
1169	!-- Summation of thread sums
1170	IF ( threads_per_task > 1 ) THEN
1171	DO i = 1, threads_per_task-1
1172	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
1173	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
1174	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
1175	sums_l(:,45:pr_palm,i)
1176	IF ( max_pr_user > 0 ) THEN
1177	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
1178	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
1179	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
1180	ENDIF
1181	ENDDO
1182	ENDIF
1183
1184	#if defined( __parallel )
1185
1186	!
1187	!-- Compute total sum from local sums
1188	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1189	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
1190	MPI_SUM, comm2d, ierr )
1191	IF ( large_scale_forcing ) THEN
1192	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
1193	MPI_REAL, MPI_SUM, comm2d, ierr )
1194	ENDIF
1195	#else
1196	sums = sums_l(:,:,0)
1197	IF ( large_scale_forcing ) THEN
1198	sums(:,81:88) = sums_ls_l
1199	ENDIF
1200	#endif
1201
1202	!
1203	!-- Final values are obtained by division by the total number of grid points
1204	!-- used for summation. After that store profiles.
1205	!-- Profiles:
1206	DO k = nzb, nzt+1
1207	sums(k,3) = sums(k,3) / ngp_2dh(sr)
1208	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
1209	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
1210	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
1211	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
1212	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
1213	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
1214	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
1215	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
1216	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
1217	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
1218	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
1219	sums(k,65:69) = sums(k,65:69) / ngp_2dh(sr)
1220	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
1221	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
1222	sums(k,89:105) = sums(k,89:105) / ngp_2dh(sr)
1223	sums(k,106:pr_palm-2) = sums(k,106:pr_palm-2)/ ngp_2dh_s_inner(k,sr)
1224	ENDDO
1225
1226	!-- Upstream-parts
1227	sums(nzb:nzb+11,pr_palm-1) = sums(nzb:nzb+11,pr_palm-1) / ngp_3d(sr)
1228	!-- u* and so on
1229	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
1230	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
1231	!-- above the topography, they are being divided by ngp_2dh(sr)
1232	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
1233	ngp_2dh(sr)
1234	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
1235	ngp_2dh(sr)
1236	!-- eges, e*
1237	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
1238	ngp_3d(sr)
1239	!-- Old and new divergence
1240	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
1241	ngp_3d_inner(sr)
1242
1243	!-- User-defined profiles
1244	IF ( max_pr_user > 0 ) THEN
1245	DO k = nzb, nzt+1
1246	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
1247	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
1248	ngp_2dh_s_inner(k,sr)
1249	ENDDO
1250	ENDIF
1251
1252	!
1253	!-- Collect horizontal average in hom.
1254	!-- Compute deduced averages (e.g. total heat flux)
1255	hom(:,1,3,sr) = sums(:,3) ! w
1256	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
1257	hom(:,1,9,sr) = sums(:,9) ! km
1258	hom(:,1,10,sr) = sums(:,10) ! kh
1259	hom(:,1,11,sr) = sums(:,11) ! l
1260	hom(:,1,12,sr) = sums(:,12) ! w"u"
1261	hom(:,1,13,sr) = sums(:,13) ! wu
1262	hom(:,1,14,sr) = sums(:,14) ! w"v"
1263	hom(:,1,15,sr) = sums(:,15) ! wv
1264	hom(:,1,16,sr) = sums(:,16) ! w"pt"
1265	hom(:,1,17,sr) = sums(:,17) ! wpt
1266	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
1267	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
1268	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
1269	hom(:,1,21,sr) = sums(:,21) ! wptBC
1270	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
1271	! profile 24 is initial profile (sa)
1272	! profiles 25-29 left empty for initial
1273	! profiles
1274	hom(:,1,30,sr) = sums(:,30) ! u*2
1275	hom(:,1,31,sr) = sums(:,31) ! v*2
1276	hom(:,1,32,sr) = sums(:,32) ! w*2
1277	hom(:,1,33,sr) = sums(:,33) ! pt*2
1278	hom(:,1,34,sr) = sums(:,34) ! e*
1279	hom(:,1,35,sr) = sums(:,35) ! w2pt
1280	hom(:,1,36,sr) = sums(:,36) ! wpt2
1281	hom(:,1,37,sr) = sums(:,37) ! we
1282	hom(:,1,38,sr) = sums(:,38) ! w*3
1283	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
1284	hom(:,1,40,sr) = sums(:,40) ! p
1285	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
1286	hom(:,1,46,sr) = sums(:,46) ! wvpt
1287	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
1288	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
1289	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
1290	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
1291	hom(:,1,51,sr) = sums(:,51) ! w"qv"
1292	hom(:,1,52,sr) = sums(:,52) ! wqv
1293	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
1294	hom(:,1,54,sr) = sums(:,54) ! ql
1295	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
1296	hom(:,1,56,sr) = sums(:,56) ! wp/dz
1297	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho )/dz
1298	hom(:,1,58,sr) = sums(:,58) ! u"pt"
1299	hom(:,1,59,sr) = sums(:,59) ! upt
1300	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
1301	hom(:,1,61,sr) = sums(:,61) ! v"pt"
1302	hom(:,1,62,sr) = sums(:,62) ! vpt
1303	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
1304	hom(:,1,64,sr) = sums(:,64) ! rho
1305	hom(:,1,65,sr) = sums(:,65) ! w"sa"
1306	hom(:,1,66,sr) = sums(:,66) ! wsa
1307	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
1308	hom(:,1,68,sr) = sums(:,68) ! wp
1309	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho
1310	hom(:,1,70,sr) = sums(:,70) ! q*2
1311	hom(:,1,71,sr) = sums(:,71) ! prho
1312	hom(:,1,72,sr) = hyp * 1E-4_wp ! hyp in dbar
1313	hom(:,1,73,sr) = sums(:,73) ! nr
1314	hom(:,1,74,sr) = sums(:,74) ! qr
1315	hom(:,1,75,sr) = sums(:,75) ! qc
1316	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
1317	! 77 is initial density profile
1318	hom(:,1,78,sr) = ug ! ug
1319	hom(:,1,79,sr) = vg ! vg
1320	hom(:,1,80,sr) = w_subs ! w_subs
1321
1322	IF ( large_scale_forcing ) THEN
1323	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
1324	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
1325	IF ( use_subsidence_tendencies ) THEN
1326	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
1327	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
1328	ELSE
1329	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
1330	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
1331	ENDIF
1332	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
1333	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
1334	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
1335	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
1336	ENDIF
1337
1338	IF ( land_surface ) THEN
1339	hom(:,1,89,sr) = sums(:,89) ! t_soil
1340	! 90 is initial t_soil profile
1341	hom(:,1,91,sr) = sums(:,91) ! m_soil
1342	! 92 is initial m_soil profile
1343	hom(:,1,93,sr) = sums(:,93) ! ghf_eb
1344	hom(:,1,94,sr) = sums(:,94) ! shf_eb
1345	hom(:,1,95,sr) = sums(:,95) ! qsws_eb
1346	hom(:,1,96,sr) = sums(:,96) ! qsws_liq_eb
1347	hom(:,1,97,sr) = sums(:,97) ! qsws_soil_eb
1348	hom(:,1,98,sr) = sums(:,98) ! qsws_veg_eb
1349	hom(:,1,99,sr) = sums(:,99) ! r_a
1350	hom(:,1,100,sr) = sums(:,100) ! r_s
1351
1352	ENDIF
1353
1354	IF ( radiation ) THEN
1355	hom(:,1,101,sr) = sums(:,101) ! rad_net
1356	hom(:,1,102,sr) = sums(:,102) ! rad_lw_in
1357	hom(:,1,103,sr) = sums(:,103) ! rad_lw_out
1358	hom(:,1,104,sr) = sums(:,104) ! rad_sw_in
1359	hom(:,1,105,sr) = sums(:,105) ! rad_sw_out
1360
1361	#if defined ( __rrtmg )
1362	IF ( radiation_scheme == 'rrtmg' ) THEN
1363	hom(:,1,106,sr) = sums(:,106) ! rrtm_aldif
1364	hom(:,1,107,sr) = sums(:,107) ! rrtm_aldir
1365	hom(:,1,108,sr) = sums(:,108) ! rrtm_asdif
1366	hom(:,1,109,sr) = sums(:,109) ! rrtm_asdir
1367	ENDIF
1368	#endif
1369
1370	ENDIF
1371
1372	hom(:,1,pr_palm-1,sr) = sums(:,pr_palm-1)
1373	! upstream-parts u_x, u_y, u_z, v_x,
1374	! v_y, usw. (in last but one profile)
1375	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
1376	! u, w'u', w'v', t (in last profile)
1377
1378	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
1379	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
1380	sums(:,pr_palm+1:pr_palm+max_pr_user)
1381	ENDIF
1382
1383	!
1384	!-- Determine the boundary layer height using two different schemes.
1385	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
1386	!-- first relative minimum (maximum) of the total heat flux.
1387	!-- The corresponding height is assumed as the boundary layer height, if it
1388	!-- is less than 1.5 times the height where the heat flux becomes negative
1389	!-- (positive) for the first time.
1390	z_i(1) = 0.0_wp
1391	first = .TRUE.
1392
1393	IF ( ocean ) THEN
1394	DO k = nzt, nzb+1, -1
1395	IF ( first .AND. hom(k,1,18,sr) < 0.0_wp &
1396	.AND. abs(hom(k,1,18,sr)) > 1.0E-8_wp) THEN
1397	first = .FALSE.
1398	height = zw(k)
1399	ENDIF
1400	IF ( hom(k,1,18,sr) < 0.0_wp .AND. &
1401	abs(hom(k,1,18,sr)) > 1.0E-8_wp .AND. &
1402	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
1403	IF ( zw(k) < 1.5_wp * height ) THEN
1404	z_i(1) = zw(k)
1405	ELSE
1406	z_i(1) = height
1407	ENDIF
1408	EXIT
1409	ENDIF
1410	ENDDO
1411	ELSE
1412	DO k = nzb, nzt-1
1413	IF ( first .AND. hom(k,1,18,sr) < 0.0_wp &
1414	.AND. abs(hom(k,1,18,sr)) > 1.0E-8_wp ) THEN
1415	first = .FALSE.
1416	height = zw(k)
1417	ENDIF
1418	IF ( hom(k,1,18,sr) < 0.0_wp .AND. &
1419	abs(hom(k,1,18,sr)) > 1.0E-8_wp .AND. &
1420	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
1421	IF ( zw(k) < 1.5_wp * height ) THEN
1422	z_i(1) = zw(k)
1423	ELSE
1424	z_i(1) = height
1425	ENDIF
1426	EXIT
1427	ENDIF
1428	ENDDO
1429	ENDIF
1430
1431	!
1432	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
1433	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
1434	!-- maximal local temperature gradient: starting from the second (the last
1435	!-- but one) vertical gridpoint, the local gradient must be at least
1436	!-- 0.2K/100m and greater than the next four gradients.
1437	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
1438	!-- ocean case!
1439	z_i(2) = 0.0_wp
1440	DO k = nzb+1, nzt+1
1441	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
1442	ENDDO
1443	dptdz_threshold = 0.2_wp / 100.0_wp
1444
1445	IF ( ocean ) THEN
1446	DO k = nzt+1, nzb+5, -1
1447	IF ( dptdz(k) > dptdz_threshold .AND. &
1448	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND. &
1449	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
1450	z_i(2) = zw(k-1)
1451	EXIT
1452	ENDIF
1453	ENDDO
1454	ELSE
1455	DO k = nzb+1, nzt-3
1456	IF ( dptdz(k) > dptdz_threshold .AND. &
1457	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND. &
1458	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
1459	z_i(2) = zw(k-1)
1460	EXIT
1461	ENDIF
1462	ENDDO
1463	ENDIF
1464
1465	hom(nzb+6,1,pr_palm,sr) = z_i(1)
1466	hom(nzb+7,1,pr_palm,sr) = z_i(2)
1467
1468	!
1469	!-- Computation of both the characteristic vertical velocity and
1470	!-- the characteristic convective boundary layer temperature.
1471	!-- The horizontal average at nzb+1 is input for the average temperature.
1472	IF ( hom(nzb,1,18,sr) > 0.0_wp .AND. abs(hom(nzb,1,18,sr)) > 1.0E-8_wp &
1473	.AND. z_i(1) /= 0.0_wp ) THEN
1474	hom(nzb+8,1,pr_palm,sr) = ( g / hom(nzb+1,1,4,sr) * &
1475	hom(nzb,1,18,sr) * &
1476	ABS( z_i(1) ) )**0.333333333_wp
1477	!-- so far this only works if Prandtl layer is used
1478	hom(nzb+11,1,pr_palm,sr) = hom(nzb,1,16,sr) / hom(nzb+8,1,pr_palm,sr)
1479	ELSE
1480	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
1481	hom(nzb+11,1,pr_palm,sr) = 0.0_wp
1482	ENDIF
1483
1484	!
1485	!-- Collect the time series quantities
1486	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
1487	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
1488	ts_value(3,sr) = dt_3d
1489	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
1490	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
1491	ts_value(6,sr) = u_max
1492	ts_value(7,sr) = v_max
1493	ts_value(8,sr) = w_max
1494	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
1495	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
1496	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
1497	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
1498	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
1499	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
1500	ts_value(15,sr) = hom(nzb+1,1,16,sr) ! w'pt' at k=1
1501	ts_value(16,sr) = hom(nzb+1,1,18,sr) ! wpt at k=1
1502	ts_value(17,sr) = hom(nzb,1,4,sr) ! pt(0)
1503	ts_value(18,sr) = hom(nzb+1,1,4,sr) ! pt(zp)
1504	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
1505	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
1506	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
1507
1508	IF ( ts_value(5,sr) /= 0.0_wp ) THEN
1509	ts_value(22,sr) = ts_value(4,sr)**2 / &
1510	( kappa * g * ts_value(5,sr) / ts_value(18,sr) ) ! L
1511	ELSE
1512	ts_value(22,sr) = 10000.0_wp
1513	ENDIF
1514
1515	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
1516
1517	!
1518	!-- Collect land surface model timeseries
1519	IF ( land_surface ) THEN
1520	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf_eb
1521	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! shf_eb
1522	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_eb
1523	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_liq_eb
1524	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! qsws_soil_eb
1525	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! qsws_veg_eb
1526	ts_value(dots_soil+6,sr) = hom(nzb,1,99,sr) ! r_a
1527	ts_value(dots_soil+7,sr) = hom(nzb,1,100,sr) ! r_s
1528	ENDIF
1529	!
1530	!-- Collect radiation model timeseries
1531	IF ( radiation ) THEN
1532	ts_value(dots_rad,sr) = hom(nzb,1,101,sr) ! rad_net
1533	ts_value(dots_rad+1,sr) = hom(nzb,1,102,sr) ! rad_lw_in
1534	ts_value(dots_rad+2,sr) = hom(nzb,1,103,sr) ! rad_lw_out
1535	ts_value(dots_rad+3,sr) = hom(nzb,1,104,sr) ! rad_lw_in
1536	ts_value(dots_rad+4,sr) = hom(nzb,1,105,sr) ! rad_lw_out
1537
1538	#if defined ( __rrtmg )
1539	IF ( radiation_scheme == 'rrtmg' ) THEN
1540	ts_value(dots_rad+5,sr) = hom(nzb,1,106,sr) ! rrtm_aldif
1541	ts_value(dots_rad+6,sr) = hom(nzb,1,107,sr) ! rrtm_aldir
1542	ts_value(dots_rad+7,sr) = hom(nzb,1,108,sr) ! rrtm_asdif
1543	ts_value(dots_rad+8,sr) = hom(nzb,1,109,sr) ! rrtm_asdir
1544	ENDIF
1545	#endif
1546
1547	ENDIF
1548
1549	!
1550	!-- Calculate additional statistics provided by the user interface
1551	CALL user_statistics( 'time_series', sr, 0 )
1552
1553	ENDDO ! loop of the subregions
1554
1555	!
1556	!-- If required, sum up horizontal averages for subsequent time averaging
1557	IF ( do_sum ) THEN
1558	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
1559	hom_sum = hom_sum + hom(:,1,:,:)
1560	average_count_pr = average_count_pr + 1
1561	do_sum = .FALSE.
1562	ENDIF
1563
1564	!
1565	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
1566	!-- This flag is reset after each time step in time_integration.
1567	flow_statistics_called = .TRUE.
1568
1569	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
1570
1571
1572	END SUBROUTINE flow_statistics
1573
1574
1575	#else
1576
1577
1578	!------------------------------------------------------------------------------!
1579	! flow statistics - accelerator version
1580	!------------------------------------------------------------------------------!
1581	SUBROUTINE flow_statistics
1582
1583	USE arrays_3d, &
1584	ONLY: ddzu, ddzw, e, hyp, km, kh, nr, p, prho, pt, q, qc, ql, qr, qs, &
1585	qsws, qswst, rho, sa, saswsb, saswst, shf, td_lsa_lpt, td_lsa_q,&
1586	td_sub_lpt, td_sub_q, time_vert, ts, tswst, u, ug, us, usws, &
1587	uswst, vsws, v, vg, vpt, vswst, w, w_subs, zw
1588
1589
1590	USE cloud_parameters, &
1591	ONLY: l_d_cp, prr, pt_d_t
1592
1593	USE control_parameters, &
1594	ONLY : average_count_pr, cloud_droplets, cloud_physics, do_sum, &
1595	dt_3d, g, humidity, icloud_scheme, kappa, large_scale_forcing, &
1596	large_scale_subsidence, max_pr_user, message_string, ocean, &
1597	passive_scalar, precipitation, simulated_time, &
1598	use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
1599	ws_scheme_mom, ws_scheme_sca
1600
1601	USE cpulog, &
1602	ONLY: cpu_log, log_point
1603
1604	USE grid_variables, &
1605	ONLY: ddx, ddy
1606
1607	USE indices, &
1608	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, ngp_sums, &
1609	ngp_sums_ls, nxl, nxr, nyn, nys, nzb, nzb_diff_s_inner, &
1610	nzb_s_inner, nzt, nzt_diff, rflags_invers
1611
1612	USE kinds
1613
1614	USE pegrid
1615
1616	USE statistics
1617
1618	IMPLICIT NONE
1619
1620	INTEGER(iwp) :: i !:
1621	INTEGER(iwp) :: j !:
1622	INTEGER(iwp) :: k !:
1623	INTEGER(iwp) :: nt !:
1624	INTEGER(iwp) :: omp_get_thread_num !:
1625	INTEGER(iwp) :: sr !:
1626	INTEGER(iwp) :: tn !:
1627
1628	LOGICAL :: first !:
1629
1630	REAL(wp) :: dptdz_threshold !:
1631	REAL(wp) :: fac !:
1632	REAL(wp) :: height !:
1633	REAL(wp) :: pts !:
1634	REAL(wp) :: sums_l_eper !:
1635	REAL(wp) :: sums_l_etot !:
1636	REAL(wp) :: s1 !:
1637	REAL(wp) :: s2 !:
1638	REAL(wp) :: s3 !:
1639	REAL(wp) :: s4 !:
1640	REAL(wp) :: s5 !:
1641	REAL(wp) :: s6 !:
1642	REAL(wp) :: s7 !:
1643	REAL(wp) :: ust !:
1644	REAL(wp) :: ust2 !:
1645	REAL(wp) :: u2 !:
1646	REAL(wp) :: vst !:
1647	REAL(wp) :: vst2 !:
1648	REAL(wp) :: v2 !:
1649	REAL(wp) :: w2 !:
1650	REAL(wp) :: z_i(2) !:
1651
1652	REAL(wp) :: dptdz(nzb+1:nzt+1) !:
1653	REAL(wp) :: sums_ll(nzb:nzt+1,2) !:
1654
1655	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
1656
1657	!
1658	!-- To be on the safe side, check whether flow_statistics has already been
1659	!-- called once after the current time step
1660	IF ( flow_statistics_called ) THEN
1661
1662	message_string = 'flow_statistics is called two times within one ' // &
1663	'timestep'
1664	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
1665
1666	ENDIF
1667
1668	!$acc data create( sums, sums_l )
1669	!$acc update device( hom )
1670
1671	!
1672	!-- Compute statistics for each (sub-)region
1673	DO sr = 0, statistic_regions
1674
1675	!
1676	!-- Initialize (local) summation array
1677	sums_l = 0.0_wp
1678
1679	!
1680	!-- Store sums that have been computed in other subroutines in summation
1681	!-- array
1682	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
1683	!-- WARNING: next line still has to be adjusted for OpenMP
1684	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) ! heat flux from advec_s_bc
1685	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
1686	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
1687
1688	!
1689	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
1690	!-- scale) vertical fluxes and velocity variances by using commonly-
1691	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
1692	!-- in combination with the 5th order advection scheme, pronounced
1693	!-- artificial kinks could be observed in the vertical profiles near the
1694	!-- surface. Please note: these kinks were not related to the model truth,
1695	!-- i.e. these kinks are just related to an evaluation problem.
1696	!-- In order avoid these kinks, vertical fluxes and horizontal as well
1697	!-- vertical velocity variances are calculated directly within the advection
1698	!-- routines, according to the numerical discretization, to evaluate the
1699	!-- statistical quantities as they will appear within the prognostic
1700	!-- equations.
1701	!-- Copy the turbulent quantities, evaluated in the advection routines to
1702	!-- the local array sums_l() for further computations.
1703	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
1704
1705	!
1706	!-- According to the Neumann bc for the horizontal velocity components,
1707	!-- the corresponding fluxes has to satisfiy the same bc.
1708	IF ( ocean ) THEN
1709	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
1710	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
1711	ENDIF
1712
1713	DO i = 0, threads_per_task-1
1714	!
1715	!-- Swap the turbulent quantities evaluated in advec_ws.
1716	sums_l(:,13,i) = sums_wsus_ws_l(:,i) ! wu
1717	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) ! wv
1718	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
1719	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
1720	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
1721	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
1722	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
1723	sums_ws2_ws_l(:,i) ) ! e*
1724	DO k = nzb, nzt
1725	sums_l(nzb+5,pr_palm,i) = sums_l(nzb+5,pr_palm,i) + 0.5_wp * ( &
1726	sums_us2_ws_l(k,i) + &
1727	sums_vs2_ws_l(k,i) + &
1728	sums_ws2_ws_l(k,i) )
1729	ENDDO
1730	ENDDO
1731
1732	ENDIF
1733
1734	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
1735
1736	DO i = 0, threads_per_task-1
1737	sums_l(:,17,i) = sums_wspts_ws_l(:,i) ! wpt from advec_s_ws
1738	IF ( ocean ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
1739	IF ( humidity .OR. passive_scalar ) sums_l(:,49,i) = &
1740	sums_wsqs_ws_l(:,i) !wq
1741	ENDDO
1742
1743	ENDIF
1744	!
1745	!-- Horizontally averaged profiles of horizontal velocities and temperature.
1746	!-- They must have been computed before, because they are already required
1747	!-- for other horizontal averages.
1748	tn = 0
1749
1750	!$OMP PARALLEL PRIVATE( i, j, k, tn )
1751	#if defined( __intel_openmp_bug )
1752	tn = omp_get_thread_num()
1753	#else
1754	!$ tn = omp_get_thread_num()
1755	#endif
1756
1757	!$acc update device( sums_l )
1758
1759	!$OMP DO
1760	!$acc parallel loop gang present( pt, rflags_invers, rmask, sums_l, u, v ) create( s1, s2, s3 )
1761	DO k = nzb, nzt+1
1762	!$acc loop vector collapse( 2 ) reduction( +: s1, s2, s3 )
1763	DO i = nxl, nxr
1764	DO j = nys, nyn
1765	!
1766	!-- k+1 is used in rflags since rflags is set 0 at surface points
1767	s1 = s1 + u(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
1768	s2 = s2 + v(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
1769	s3 = s3 + pt(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
1770	ENDDO
1771	ENDDO
1772	sums_l(k,1,tn) = s1
1773	sums_l(k,2,tn) = s2
1774	sums_l(k,4,tn) = s3
1775	ENDDO
1776	!$acc end parallel loop
1777
1778	!
1779	!-- Horizontally averaged profile of salinity
1780	IF ( ocean ) THEN
1781	!$OMP DO
1782	!$acc parallel loop gang present( rflags_invers, rmask, sums_l, sa ) create( s1 )
1783	DO k = nzb, nzt+1
1784	!$acc loop vector collapse( 2 ) reduction( +: s1 )
1785	DO i = nxl, nxr
1786	DO j = nys, nyn
1787	s1 = s1 + sa(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
1788	ENDDO
1789	ENDDO
1790	sums_l(k,23,tn) = s1
1791	ENDDO
1792	!$acc end parallel loop
1793	ENDIF
1794
1795	!
1796	!-- Horizontally averaged profiles of virtual potential temperature,
1797	!-- total water content, specific humidity and liquid water potential
1798	!-- temperature
1799	IF ( humidity ) THEN
1800
1801	!$OMP DO
1802	!$acc parallel loop gang present( q, rflags_invers, rmask, sums_l, vpt ) create( s1, s2 )
1803	DO k = nzb, nzt+1
1804	!$acc loop vector collapse( 2 ) reduction( +: s1, s2 )
1805	DO i = nxl, nxr
1806	DO j = nys, nyn
1807	s1 = s1 + q(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
1808	s2 = s2 + vpt(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
1809	ENDDO
1810	ENDDO
1811	sums_l(k,41,tn) = s1
1812	sums_l(k,44,tn) = s2
1813	ENDDO
1814	!$acc end parallel loop
1815
1816	IF ( cloud_physics ) THEN
1817	!$OMP DO
1818	!$acc parallel loop gang present( pt, q, ql, rflags_invers, rmask, sums_l ) create( s1, s2 )
1819	DO k = nzb, nzt+1
1820	!$acc loop vector collapse( 2 ) reduction( +: s1, s2 )
1821	DO i = nxl, nxr
1822	DO j = nys, nyn
1823	s1 = s1 + ( q(k,j,i) - ql(k,j,i) ) * &
1824	rmask(j,i,sr) * rflags_invers(j,i,k+1)
1825	s2 = s2 + ( pt(k,j,i) + l_d_cppt_d_t(k) ql(k,j,i) ) * &
1826	rmask(j,i,sr) * rflags_invers(j,i,k+1)
1827	ENDDO
1828	ENDDO
1829	sums_l(k,42,tn) = s1
1830	sums_l(k,43,tn) = s2
1831	ENDDO
1832	!$acc end parallel loop
1833	ENDIF
1834	ENDIF
1835
1836	!
1837	!-- Horizontally averaged profiles of passive scalar
1838	IF ( passive_scalar ) THEN
1839	!$OMP DO
1840	!$acc parallel loop gang present( q, rflags_invers, rmask, sums_l ) create( s1 )
1841	DO k = nzb, nzt+1
1842	!$acc loop vector collapse( 2 ) reduction( +: s1 )
1843	DO i = nxl, nxr
1844	DO j = nys, nyn
1845	s1 = s1 + q(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
1846	ENDDO
1847	ENDDO
1848	sums_l(k,41,tn) = s1
1849	ENDDO
1850	!$acc end parallel loop
1851	ENDIF
1852	!$OMP END PARALLEL
1853
1854	!
1855	!-- Summation of thread sums
1856	IF ( threads_per_task > 1 ) THEN
1857	DO i = 1, threads_per_task-1
1858	!$acc parallel present( sums_l )
1859	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
1860	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
1861	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
1862	!$acc end parallel
1863	IF ( ocean ) THEN
1864	!$acc parallel present( sums_l )
1865	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
1866	!$acc end parallel
1867	ENDIF
1868	IF ( humidity ) THEN
1869	!$acc parallel present( sums_l )
1870	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
1871	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
1872	!$acc end parallel
1873	IF ( cloud_physics ) THEN
1874	!$acc parallel present( sums_l )
1875	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
1876	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
1877	!$acc end parallel
1878	ENDIF
1879	ENDIF
1880	IF ( passive_scalar ) THEN
1881	!$acc parallel present( sums_l )
1882	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
1883	!$acc end parallel
1884	ENDIF
1885	ENDDO
1886	ENDIF
1887
1888	#if defined( __parallel )
1889	!
1890	!-- Compute total sum from local sums
1891	!$acc update host( sums_l )
1892	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1893	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
1894	MPI_SUM, comm2d, ierr )
1895	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1896	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
1897	MPI_SUM, comm2d, ierr )
1898	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1899	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
1900	MPI_SUM, comm2d, ierr )
1901	IF ( ocean ) THEN
1902	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1903	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
1904	MPI_REAL, MPI_SUM, comm2d, ierr )
1905	ENDIF
1906	IF ( humidity ) THEN
1907	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1908	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
1909	MPI_REAL, MPI_SUM, comm2d, ierr )
1910	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1911	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
1912	MPI_REAL, MPI_SUM, comm2d, ierr )
1913	IF ( cloud_physics ) THEN
1914	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1915	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
1916	MPI_REAL, MPI_SUM, comm2d, ierr )
1917	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1918	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
1919	MPI_REAL, MPI_SUM, comm2d, ierr )
1920	ENDIF
1921	ENDIF
1922
1923	IF ( passive_scalar ) THEN
1924	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
1925	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
1926	MPI_REAL, MPI_SUM, comm2d, ierr )
1927	ENDIF
1928	!$acc update device( sums )
1929	#else
1930	!$acc parallel present( sums, sums_l )
1931	sums(:,1) = sums_l(:,1,0)
1932	sums(:,2) = sums_l(:,2,0)
1933	sums(:,4) = sums_l(:,4,0)
1934	!$acc end parallel
1935	IF ( ocean ) THEN
1936	!$acc parallel present( sums, sums_l )
1937	sums(:,23) = sums_l(:,23,0)
1938	!$acc end parallel
1939	ENDIF
1940	IF ( humidity ) THEN
1941	!$acc parallel present( sums, sums_l )
1942	sums(:,44) = sums_l(:,44,0)
1943	sums(:,41) = sums_l(:,41,0)
1944	!$acc end parallel
1945	IF ( cloud_physics ) THEN
1946	!$acc parallel present( sums, sums_l )
1947	sums(:,42) = sums_l(:,42,0)
1948	sums(:,43) = sums_l(:,43,0)
1949	!$acc end parallel
1950	ENDIF
1951	ENDIF
1952	IF ( passive_scalar ) THEN
1953	!$acc parallel present( sums, sums_l )
1954	sums(:,41) = sums_l(:,41,0)
1955	!$acc end parallel
1956	ENDIF
1957	#endif
1958
1959	!
1960	!-- Final values are obtained by division by the total number of grid points
1961	!-- used for summation. After that store profiles.
1962	!$acc parallel present( hom, ngp_2dh, ngp_2dh_s_inner, sums )
1963	sums(:,1) = sums(:,1) / ngp_2dh(sr)
1964	sums(:,2) = sums(:,2) / ngp_2dh(sr)
1965	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
1966	hom(:,1,1,sr) = sums(:,1) ! u
1967	hom(:,1,2,sr) = sums(:,2) ! v
1968	hom(:,1,4,sr) = sums(:,4) ! pt
1969	!$acc end parallel
1970
1971	!
1972	!-- Salinity
1973	IF ( ocean ) THEN
1974	!$acc parallel present( hom, ngp_2dh_s_inner, sums )
1975	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
1976	hom(:,1,23,sr) = sums(:,23) ! sa
1977	!$acc end parallel
1978	ENDIF
1979
1980	!
1981	!-- Humidity and cloud parameters
1982	IF ( humidity ) THEN
1983	!$acc parallel present( hom, ngp_2dh_s_inner, sums )
1984	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
1985	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
1986	hom(:,1,44,sr) = sums(:,44) ! vpt
1987	hom(:,1,41,sr) = sums(:,41) ! qv (q)
1988	!$acc end parallel
1989	IF ( cloud_physics ) THEN
1990	!$acc parallel present( hom, ngp_2dh_s_inner, sums )
1991	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
1992	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
1993	hom(:,1,42,sr) = sums(:,42) ! qv
1994	hom(:,1,43,sr) = sums(:,43) ! pt
1995	!$acc end parallel
1996	ENDIF
1997	ENDIF
1998
1999	!
2000	!-- Passive scalar
2001	IF ( passive_scalar ) THEN
2002	!$acc parallel present( hom, ngp_2dh_s_inner, sums )
2003	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
2004	hom(:,1,41,sr) = sums(:,41) ! s (q)
2005	!$acc end parallel
2006	ENDIF
2007
2008	!
2009	!-- Horizontally averaged profiles of the remaining prognostic variables,
2010	!-- variances, the total and the perturbation energy (single values in last
2011	!-- column of sums_l) and some diagnostic quantities.
2012	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
2013	!-- ---- speaking the following k-loop would have to be split up and
2014	!-- rearranged according to the staggered grid.
2015	!-- However, this implies no error since staggered velocity components
2016	!-- are zero at the walls and inside buildings.
2017	tn = 0
2018	#if defined( __intel_openmp_bug )
2019	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, sums_l_eper, sums_l_etot, &
2020	!$OMP tn, ust, ust2, u2, vst, vst2, v2, w2 )
2021	tn = omp_get_thread_num()
2022	#else
2023	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, sums_l_eper, sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, w2 )
2024	!$ tn = omp_get_thread_num()
2025	#endif
2026	!$OMP DO
2027	!$acc parallel loop gang present( e, hom, kh, km, p, pt, w, rflags_invers, rmask, sums_l ) create( s1, s2, s3, s4, s5, s6, s7 )
2028	DO k = nzb, nzt+1
2029	!$acc loop vector collapse( 2 ) reduction( +: s1, s2, s3, s4, s5, s6, s7 )
2030	DO i = nxl, nxr
2031	DO j = nys, nyn
2032	!
2033	!-- Prognostic and diagnostic variables
2034	s1 = s1 + w(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2035	s2 = s2 + e(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2036	s3 = s3 + km(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2037	s4 = s4 + kh(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2038	s5 = s5 + p(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2039	s6 = s6 + ( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr) * &
2040	rflags_invers(j,i,k+1)
2041	!
2042	!-- Higher moments
2043	!-- (Computation of the skewness of w further below)
2044	s7 = s7 + w(k,j,i)*3 rmask(j,i,sr) * rflags_invers(j,i,k+1)
2045	ENDDO
2046	ENDDO
2047	sums_l(k,3,tn) = s1
2048	sums_l(k,8,tn) = s2
2049	sums_l(k,9,tn) = s3
2050	sums_l(k,10,tn) = s4
2051	sums_l(k,40,tn) = s5
2052	sums_l(k,33,tn) = s6
2053	sums_l(k,38,tn) = s7
2054	ENDDO
2055	!$acc end parallel loop
2056
2057	IF ( humidity ) THEN
2058	!$OMP DO
2059	!$acc parallel loop gang present( hom, q, rflags_invers, rmask, sums_l ) create( s1 )
2060	DO k = nzb, nzt+1
2061	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2062	DO i = nxl, nxr
2063	DO j = nys, nyn
2064	s1 = s1 + ( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr) * &
2065	rflags_invers(j,i,k+1)
2066	ENDDO
2067	ENDDO
2068	sums_l(k,70,tn) = s1
2069	ENDDO
2070	!$acc end parallel loop
2071	ENDIF
2072
2073	!
2074	!-- Total and perturbation energy for the total domain (being
2075	!-- collected in the last column of sums_l).
2076	!$OMP DO
2077	!$acc parallel loop collapse(3) present( rflags_invers, rmask, u, v, w ) reduction(+:s1)
2078	DO i = nxl, nxr
2079	DO j = nys, nyn
2080	DO k = nzb, nzt+1
2081	s1 = s1 + 0.5_wp * &
2082	( u(k,j,i)2 + v(k,j,i)2 + w(k,j,i)*2 ) &
2083	rmask(j,i,sr) * rflags_invers(j,i,k+1)
2084	ENDDO
2085	ENDDO
2086	ENDDO
2087	!$acc end parallel loop
2088	!$acc parallel present( sums_l )
2089	sums_l(nzb+4,pr_palm,tn) = s1
2090	!$acc end parallel
2091
2092	!$OMP DO
2093	!$acc parallel present( rmask, sums_l, us, usws, vsws, ts ) create( s1, s2, s3, s4 )
2094	!$acc loop vector collapse( 2 ) reduction( +: s1, s2, s3, s4 )
2095	DO i = nxl, nxr
2096	DO j = nys, nyn
2097	!
2098	!-- 2D-arrays (being collected in the last column of sums_l)
2099	s1 = s1 + us(j,i) * rmask(j,i,sr)
2100	s2 = s2 + usws(j,i) * rmask(j,i,sr)
2101	s3 = s3 + vsws(j,i) * rmask(j,i,sr)
2102	s4 = s4 + ts(j,i) * rmask(j,i,sr)
2103	ENDDO
2104	ENDDO
2105	sums_l(nzb,pr_palm,tn) = s1
2106	sums_l(nzb+1,pr_palm,tn) = s2
2107	sums_l(nzb+2,pr_palm,tn) = s3
2108	sums_l(nzb+3,pr_palm,tn) = s4
2109	!$acc end parallel
2110
2111	IF ( humidity ) THEN
2112	!$acc parallel present( qs, rmask, sums_l ) create( s1 )
2113	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2114	DO i = nxl, nxr
2115	DO j = nys, nyn
2116	s1 = s1 + qs(j,i) * rmask(j,i,sr)
2117	ENDDO
2118	ENDDO
2119	sums_l(nzb+12,pr_palm,tn) = s1
2120	!$acc end parallel
2121	ENDIF
2122
2123	!
2124	!-- Computation of statistics when ws-scheme is not used. Else these
2125	!-- quantities are evaluated in the advection routines.
2126	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
2127
2128	!$OMP DO
2129	!$acc parallel loop gang present( u, v, w, rflags_invers, rmask, sums_l ) create( s1, s2, s3, s4, ust2, vst2, w2 )
2130	DO k = nzb, nzt+1
2131	!$acc loop vector collapse( 2 ) reduction( +: s1, s2, s3, s4 )
2132	DO i = nxl, nxr
2133	DO j = nys, nyn
2134	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
2135	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
2136	w2 = w(k,j,i)**2
2137
2138	s1 = s1 + ust2 * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2139	s2 = s2 + vst2 * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2140	s3 = s3 + w2 * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2141	!
2142	!-- Perturbation energy
2143	s4 = s4 + 0.5_wp * ( ust2 + vst2 + w2 ) * rmask(j,i,sr) * &
2144	rflags_invers(j,i,k+1)
2145	ENDDO
2146	ENDDO
2147	sums_l(k,30,tn) = s1
2148	sums_l(k,31,tn) = s2
2149	sums_l(k,32,tn) = s3
2150	sums_l(k,34,tn) = s4
2151	ENDDO
2152	!$acc end parallel loop
2153	!
2154	!-- Total perturbation TKE
2155	!$OMP DO
2156	!$acc parallel present( sums_l ) create( s1 )
2157	!$acc loop reduction( +: s1 )
2158	DO k = nzb, nzt+1
2159	s1 = s1 + sums_l(k,34,tn)
2160	ENDDO
2161	sums_l(nzb+5,pr_palm,tn) = s1
2162	!$acc end parallel
2163
2164	ENDIF
2165
2166	!
2167	!-- Horizontally averaged profiles of the vertical fluxes
2168
2169	!
2170	!-- Subgridscale fluxes.
2171	!-- WARNING: If a Prandtl-layer is used (k=nzb for flat terrain), the fluxes
2172	!-- ------- should be calculated there in a different way. This is done
2173	!-- in the next loop further below, where results from this loop are
2174	!-- overwritten. However, THIS WORKS IN CASE OF FLAT TERRAIN ONLY!
2175	!-- The non-flat case still has to be handled.
2176	!-- NOTE: for simplicity, nzb_s_inner is used below, although
2177	!-- ---- strictly speaking the following k-loop would have to be
2178	!-- split up according to the staggered grid.
2179	!-- However, this implies no error since staggered velocity
2180	!-- components are zero at the walls and inside buildings.
2181	!$OMP DO
2182	!$acc parallel loop gang present( ddzu, kh, km, pt, u, v, w, rflags_invers, rmask, sums_l ) create( s1, s2, s3 )
2183	DO k = nzb, nzt_diff
2184	!$acc loop vector collapse( 2 ) reduction( +: s1, s2, s3 )
2185	DO i = nxl, nxr
2186	DO j = nys, nyn
2187
2188	!
2189	!-- Momentum flux w"u"
2190	s1 = s1 - 0.25_wp * ( &
2191	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
2192	) * ( &
2193	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
2194	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
2195	) &
2196	* rmask(j,i,sr) * rflags_invers(j,i,k+1)
2197	!
2198	!-- Momentum flux w"v"
2199	s2 = s2 - 0.25_wp * ( &
2200	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
2201	) * ( &
2202	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
2203	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
2204	) &
2205	* rmask(j,i,sr) * rflags_invers(j,i,k+1)
2206	!
2207	!-- Heat flux w"pt"
2208	s3 = s3 - 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) ) &
2209	* ( pt(k+1,j,i) - pt(k,j,i) ) &
2210	* ddzu(k+1) * rmask(j,i,sr) &
2211	* rflags_invers(j,i,k+1)
2212	ENDDO
2213	ENDDO
2214	sums_l(k,12,tn) = s1
2215	sums_l(k,14,tn) = s2
2216	sums_l(k,16,tn) = s3
2217	ENDDO
2218	!$acc end parallel loop
2219
2220	!
2221	!-- Salinity flux w"sa"
2222	IF ( ocean ) THEN
2223	!$acc parallel loop gang present( ddzu, kh, sa, rflags_invers, rmask, sums_l ) create( s1 )
2224	DO k = nzb, nzt_diff
2225	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2226	DO i = nxl, nxr
2227	DO j = nys, nyn
2228	s1 = s1 - 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) ) &
2229	* ( sa(k+1,j,i) - sa(k,j,i) ) &
2230	* ddzu(k+1) * rmask(j,i,sr) &
2231	* rflags_invers(j,i,k+1)
2232	ENDDO
2233	ENDDO
2234	sums_l(k,65,tn) = s1
2235	ENDDO
2236	!$acc end parallel loop
2237	ENDIF
2238
2239	!
2240	!-- Buoyancy flux, water flux (humidity flux) w"q"
2241	IF ( humidity ) THEN
2242
2243	!$acc parallel loop gang present( ddzu, kh, q, vpt, rflags_invers, rmask, sums_l ) create( s1, s2 )
2244	DO k = nzb, nzt_diff
2245	!$acc loop vector collapse( 2 ) reduction( +: s1, s2 )
2246	DO i = nxl, nxr
2247	DO j = nys, nyn
2248	s1 = s1 - 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) ) &
2249	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
2250	* ddzu(k+1) * rmask(j,i,sr) &
2251	* rflags_invers(j,i,k+1)
2252	s2 = s2 - 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) ) &
2253	* ( q(k+1,j,i) - q(k,j,i) ) &
2254	* ddzu(k+1) * rmask(j,i,sr) &
2255	* rflags_invers(j,i,k+1)
2256	ENDDO
2257	ENDDO
2258	sums_l(k,45,tn) = s1
2259	sums_l(k,48,tn) = s2
2260	ENDDO
2261	!$acc end parallel loop
2262
2263	IF ( cloud_physics ) THEN
2264
2265	!$acc parallel loop gang present( ddzu, kh, q, ql, rflags_invers, rmask, sums_l ) create( s1 )
2266	DO k = nzb, nzt_diff
2267	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2268	DO i = nxl, nxr
2269	DO j = nys, nyn
2270	s1 = s1 - 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) ) &
2271	* ( ( q(k+1,j,i) - ql(k+1,j,i) ) &
2272	- ( q(k,j,i) - ql(k,j,i) ) ) &
2273	* ddzu(k+1) * rmask(j,i,sr) &
2274	* rflags_invers(j,i,k+1)
2275	ENDDO
2276	ENDDO
2277	sums_l(k,51,tn) = s1
2278	ENDDO
2279	!$acc end parallel loop
2280
2281	ENDIF
2282
2283	ENDIF
2284	!
2285	!-- Passive scalar flux
2286	IF ( passive_scalar ) THEN
2287
2288	!$acc parallel loop gang present( ddzu, kh, q, rflags_invers, rmask, sums_l ) create( s1 )
2289	DO k = nzb, nzt_diff
2290	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2291	DO i = nxl, nxr
2292	DO j = nys, nyn
2293	s1 = s1 - 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) ) &
2294	* ( q(k+1,j,i) - q(k,j,i) ) &
2295	* ddzu(k+1) * rmask(j,i,sr) &
2296	* rflags_invers(j,i,k+1)
2297	ENDDO
2298	ENDDO
2299	sums_l(k,48,tn) = s1
2300	ENDDO
2301	!$acc end parallel loop
2302
2303	ENDIF
2304
2305	IF ( use_surface_fluxes ) THEN
2306
2307	!$OMP DO
2308	!$acc parallel present( rmask, shf, sums_l, usws, vsws ) create( s1, s2, s3, s4, s5 )
2309	!$acc loop vector collapse( 2 ) reduction( +: s1, s2, s3, s4, s5 )
2310	DO i = nxl, nxr
2311	DO j = nys, nyn
2312	!
2313	!-- Subgridscale fluxes in the Prandtl layer
2314	s1 = s1 + usws(j,i) * rmask(j,i,sr) ! w"u"
2315	s2 = s2 + vsws(j,i) * rmask(j,i,sr) ! w"v"
2316	s3 = s3 + shf(j,i) * rmask(j,i,sr) ! w"pt"
2317	s4 = s4 + 0.0_wp * rmask(j,i,sr) ! u"pt"
2318	s5 = s5 + 0.0_wp * rmask(j,i,sr) ! v"pt"
2319	ENDDO
2320	ENDDO
2321	sums_l(nzb,12,tn) = s1
2322	sums_l(nzb,14,tn) = s2
2323	sums_l(nzb,16,tn) = s3
2324	sums_l(nzb,58,tn) = s4
2325	sums_l(nzb,61,tn) = s5
2326	!$acc end parallel
2327
2328	IF ( ocean ) THEN
2329
2330	!$OMP DO
2331	!$acc parallel present( rmask, saswsb, sums_l ) create( s1 )
2332	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2333	DO i = nxl, nxr
2334	DO j = nys, nyn
2335	s1 = s1 + saswsb(j,i) * rmask(j,i,sr) ! w"sa"
2336	ENDDO
2337	ENDDO
2338	sums_l(nzb,65,tn) = s1
2339	!$acc end parallel
2340
2341	ENDIF
2342
2343	IF ( humidity ) THEN
2344
2345	!$OMP DO
2346	!$acc parallel present( pt, q, qsws, rmask, shf, sums_l ) create( s1, s2 )
2347	!$acc loop vector collapse( 2 ) reduction( +: s1, s2 )
2348	DO i = nxl, nxr
2349	DO j = nys, nyn
2350	s1 = s1 + qsws(j,i) * rmask(j,i,sr) ! w"q" (w"qv")
2351	s2 = s2 + ( ( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * shf(j,i) &
2352	+ 0.61_wp * pt(nzb,j,i) * qsws(j,i) )
2353	ENDDO
2354	ENDDO
2355	sums_l(nzb,48,tn) = s1
2356	sums_l(nzb,45,tn) = s2
2357	!$acc end parallel
2358
2359	IF ( cloud_droplets ) THEN
2360
2361	!$OMP DO
2362	!$acc parallel present( pt, q, ql, qsws, rmask, shf, sums_l ) create( s1 )
2363	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2364	DO i = nxl, nxr
2365	DO j = nys, nyn
2366	s1 = s1 + ( ( 1.0_wp + &
2367	0.61_wp * q(nzb,j,i) - ql(nzb,j,i) ) * &
2368	shf(j,i) + 0.61_wp * pt(nzb,j,i) * qsws(j,i) )
2369	ENDDO
2370	ENDDO
2371	sums_l(nzb,45,tn) = s1
2372	!$acc end parallel
2373
2374	ENDIF
2375
2376	IF ( cloud_physics ) THEN
2377
2378	!$OMP DO
2379	!$acc parallel present( qsws, rmask, sums_l ) create( s1 )
2380	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2381	DO i = nxl, nxr
2382	DO j = nys, nyn
2383	!
2384	!-- Formula does not work if ql(nzb) /= 0.0
2385	s1 = s1 + qsws(j,i) * rmask(j,i,sr) ! w"q" (w"qv")
2386	ENDDO
2387	ENDDO
2388	sums_l(nzb,51,tn) = s1
2389	!$acc end parallel
2390
2391	ENDIF
2392
2393	ENDIF
2394
2395	IF ( passive_scalar ) THEN
2396
2397	!$OMP DO
2398	!$acc parallel present( qsws, rmask, sums_l ) create( s1 )
2399	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2400	DO i = nxl, nxr
2401	DO j = nys, nyn
2402	s1 = s1 + qsws(j,i) * rmask(j,i,sr) ! w"q" (w"qv")
2403	ENDDO
2404	ENDDO
2405	sums_l(nzb,48,tn) = s1
2406	!$acc end parallel
2407
2408	ENDIF
2409
2410	ENDIF
2411
2412	!
2413	!-- Subgridscale fluxes at the top surface
2414	IF ( use_top_fluxes ) THEN
2415
2416	!$OMP DO
2417	!$acc parallel present( rmask, sums_l, tswst, uswst, vswst ) create( s1, s2, s3, s4, s5 )
2418	!$acc loop vector collapse( 2 ) reduction( +: s1, s2, s3, s4, s5 )
2419	DO i = nxl, nxr
2420	DO j = nys, nyn
2421	s1 = s1 + uswst(j,i) * rmask(j,i,sr) ! w"u"
2422	s2 = s2 + vswst(j,i) * rmask(j,i,sr) ! w"v"
2423	s3 = s3 + tswst(j,i) * rmask(j,i,sr) ! w"pt"
2424	s4 = s4 + 0.0_wp * rmask(j,i,sr) ! u"pt"
2425	s5 = s5 + 0.0_wp * rmask(j,i,sr) ! v"pt"
2426	ENDDO
2427	ENDDO
2428	sums_l(nzt:nzt+1,12,tn) = s1
2429	sums_l(nzt:nzt+1,14,tn) = s2
2430	sums_l(nzt:nzt+1,16,tn) = s3
2431	sums_l(nzt:nzt+1,58,tn) = s4
2432	sums_l(nzt:nzt+1,61,tn) = s5
2433	!$acc end parallel
2434
2435	IF ( ocean ) THEN
2436
2437	!$OMP DO
2438	!$acc parallel present( rmask, saswst, sums_l ) create( s1 )
2439	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2440	DO i = nxl, nxr
2441	DO j = nys, nyn
2442	s1 = s1 + saswst(j,i) * rmask(j,i,sr) ! w"sa"
2443	ENDDO
2444	ENDDO
2445	sums_l(nzt,65,tn) = s1
2446	!$acc end parallel
2447
2448	ENDIF
2449
2450	IF ( humidity ) THEN
2451
2452	!$OMP DO
2453	!$acc parallel present( pt, q, qswst, rmask, tswst, sums_l ) create( s1, s2 )
2454	!$acc loop vector collapse( 2 ) reduction( +: s1, s2 )
2455	DO i = nxl, nxr
2456	DO j = nys, nyn
2457	s1 = s1 + qswst(j,i) * rmask(j,i,sr) ! w"q" (w"qv")
2458	s2 = s2 + ( ( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * tswst(j,i) +&
2459	0.61_wp * pt(nzt,j,i) * qswst(j,i) )
2460	ENDDO
2461	ENDDO
2462	sums_l(nzt,48,tn) = s1
2463	sums_l(nzt,45,tn) = s2
2464	!$acc end parallel
2465
2466	IF ( cloud_droplets ) THEN
2467
2468	!$OMP DO
2469	!$acc parallel present( pt, q, ql, qswst, rmask, tswst, sums_l ) create( s1 )
2470	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2471	DO i = nxl, nxr
2472	DO j = nys, nyn
2473	s1 = s1 + ( ( 1.0_wp + &
2474	0.61_wp * q(nzt,j,i) - ql(nzt,j,i) ) * &
2475	tswst(j,i) + &
2476	0.61_wp * pt(nzt,j,i) * qswst(j,i) )
2477	ENDDO
2478	ENDDO
2479	sums_l(nzt,45,tn) = s1
2480	!$acc end parallel
2481
2482	ENDIF
2483
2484	IF ( cloud_physics ) THEN
2485
2486	!$OMP DO
2487	!$acc parallel present( qswst, rmask, sums_l ) create( s1 )
2488	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2489	DO i = nxl, nxr
2490	DO j = nys, nyn
2491	!
2492	!-- Formula does not work if ql(nzb) /= 0.0
2493	s1 = s1 + qswst(j,i) * rmask(j,i,sr) ! w"q" (w"qv")
2494	ENDDO
2495	ENDDO
2496	sums_l(nzt,51,tn) = s1
2497	!$acc end parallel
2498
2499	ENDIF
2500
2501	ENDIF
2502
2503	IF ( passive_scalar ) THEN
2504
2505	!$OMP DO
2506	!$acc parallel present( qswst, rmask, sums_l ) create( s1 )
2507	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2508	DO i = nxl, nxr
2509	DO j = nys, nyn
2510	s1 = s1 + qswst(j,i) * rmask(j,i,sr) ! w"q" (w"qv")
2511	ENDDO
2512	ENDDO
2513	sums_l(nzt,48,tn) = s1
2514	!$acc end parallel
2515
2516	ENDIF
2517
2518	ENDIF
2519
2520	!
2521	!-- Resolved fluxes (can be computed for all horizontal points)
2522	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
2523	!-- ---- speaking the following k-loop would have to be split up and
2524	!-- rearranged according to the staggered grid.
2525	!$acc parallel loop gang present( hom, pt, rflags_invers, rmask, sums_l, u, v, w ) create( s1, s2, s3 )
2526	DO k = nzb, nzt_diff
2527	!$acc loop vector collapse( 2 ) reduction( +: s1, s2, s3 )
2528	DO i = nxl, nxr
2529	DO j = nys, nyn
2530	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
2531	u(k+1,j,i) - hom(k+1,1,1,sr) )
2532	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
2533	v(k+1,j,i) - hom(k+1,1,2,sr) )
2534	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
2535	pt(k+1,j,i) - hom(k+1,1,4,sr) )
2536	!
2537	!-- Higher moments
2538	s1 = s1 + pts * w(k,j,i)*2 rmask(j,i,sr) * rflags_invers(j,i,k+1)
2539	s2 = s2 + pts*2 w(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2540	!
2541	!-- Energy flux we (has to be adjusted?)
2542	s3 = s3 + w(k,j,i) * 0.5_wp * ( ust2 + vst2 + w(k,j,i)**2 )&
2543	* rmask(j,i,sr) * rflags_invers(j,i,k+1)
2544	ENDDO
2545	ENDDO
2546	sums_l(k,35,tn) = s1
2547	sums_l(k,36,tn) = s2
2548	sums_l(k,37,tn) = s3
2549	ENDDO
2550	!$acc end parallel loop
2551
2552	!
2553	!-- Salinity flux and density (density does not belong to here,
2554	!-- but so far there is no other suitable place to calculate)
2555	IF ( ocean ) THEN
2556
2557	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
2558
2559	!$acc parallel loop gang present( hom, rflags_invers, rmask, sa, sums_l, w ) create( s1 )
2560	DO k = nzb, nzt_diff
2561	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2562	DO i = nxl, nxr
2563	DO j = nys, nyn
2564	s1 = s1 + 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
2565	sa(k+1,j,i) - hom(k+1,1,23,sr) ) &
2566	* w(k,j,i) * rmask(j,i,sr) &
2567	* rflags_invers(j,i,k+1)
2568	ENDDO
2569	ENDDO
2570	sums_l(k,66,tn) = s1
2571	ENDDO
2572	!$acc end parallel loop
2573
2574	ENDIF
2575
2576	!$acc parallel loop gang present( rflags_invers, rho, prho, rmask, sums_l ) create( s1, s2 )
2577	DO k = nzb, nzt_diff
2578	!$acc loop vector collapse( 2 ) reduction( +: s1, s2 )
2579	DO i = nxl, nxr
2580	DO j = nys, nyn
2581	s1 = s1 + rho(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2582	s2 = s2 + prho(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2583	ENDDO
2584	ENDDO
2585	sums_l(k,64,tn) = s1
2586	sums_l(k,71,tn) = s2
2587	ENDDO
2588	!$acc end parallel loop
2589
2590	ENDIF
2591
2592	!
2593	!-- Buoyancy flux, water flux, humidity flux, liquid water
2594	!-- content, rain drop concentration and rain water content
2595	IF ( humidity ) THEN
2596
2597	IF ( cloud_physics .OR. cloud_droplets ) THEN
2598
2599	!$acc parallel loop gang present( hom, rflags_invers, rmask, sums_l, vpt, w ) create( s1 )
2600	DO k = nzb, nzt_diff
2601	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2602	DO i = nxl, nxr
2603	DO j = nys, nyn
2604	s1 = s1 + 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
2605	vpt(k+1,j,i) - hom(k+1,1,44,sr) ) * &
2606	w(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2607	ENDDO
2608	ENDDO
2609	sums_l(k,46,tn) = s1
2610	ENDDO
2611	!$acc end parallel loop
2612
2613	IF ( .NOT. cloud_droplets ) THEN
2614
2615	!$acc parallel loop gang present( hom, q, ql, rflags_invers, rmask, sums_l, w ) create( s1 )
2616	DO k = nzb, nzt_diff
2617	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2618	DO i = nxl, nxr
2619	DO j = nys, nyn
2620	s1 = s1 + 0.5_wp * ( ( q(k,j,i) - ql(k,j,i) ) - hom(k,1,42,sr) + &
2621	( q(k+1,j,i) - ql(k+1,j,i) ) - hom(k+1,1,42,sr) ) &
2622	* w(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2623	ENDDO
2624	ENDDO
2625	sums_l(k,52,tn) = s1
2626	ENDDO
2627	!$acc end parallel loop
2628
2629	IF ( icloud_scheme == 0 ) THEN
2630
2631	!$acc parallel loop gang present( qc, ql, rflags_invers, rmask, sums_l ) create( s1, s2 )
2632	DO k = nzb, nzt_diff
2633	!$acc loop vector collapse( 2 ) reduction( +: s1, s2 )
2634	DO i = nxl, nxr
2635	DO j = nys, nyn
2636	s1 = s1 + ql(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2637	s2 = s2 + qc(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2638	ENDDO
2639	ENDDO
2640	sums_l(k,54,tn) = s1
2641	sums_l(k,75,tn) = s2
2642	ENDDO
2643	!$acc end parallel loop
2644
2645	IF ( precipitation ) THEN
2646
2647	!$acc parallel loop gang present( nr, qr, prr, rflags_invers, rmask, sums_l ) create( s1, s2, s3 )
2648	DO k = nzb, nzt_diff
2649	!$acc loop vector collapse( 2 ) reduction( +: s1, s2, s3 )
2650	DO i = nxl, nxr
2651	DO j = nys, nyn
2652	s1 = s1 + nr(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2653	s2 = s2 + qr(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2654	s3 = s3 + prr(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2655	ENDDO
2656	ENDDO
2657	sums_l(k,73,tn) = s1
2658	sums_l(k,74,tn) = s2
2659	sums_l(k,76,tn) = s3
2660	ENDDO
2661	!$acc end parallel loop
2662
2663	ENDIF
2664
2665	ELSE
2666
2667	!$acc parallel loop gang present( ql, rflags_invers, rmask, sums_l ) create( s1 )
2668	DO k = nzb, nzt_diff
2669	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2670	DO i = nxl, nxr
2671	DO j = nys, nyn
2672	s1 = s1 + ql(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2673	ENDDO
2674	ENDDO
2675	sums_l(k,54,tn) = s1
2676	ENDDO
2677	!$acc end parallel loop
2678
2679	ENDIF
2680
2681	ELSE
2682
2683	!$acc parallel loop gang present( ql, rflags_invers, rmask, sums_l ) create( s1 )
2684	DO k = nzb, nzt_diff
2685	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2686	DO i = nxl, nxr
2687	DO j = nys, nyn
2688	s1 = s1 + ql(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2689	ENDDO
2690	ENDDO
2691	sums_l(k,54,tn) = s1
2692	ENDDO
2693	!$acc end parallel loop
2694
2695	ENDIF
2696
2697	ELSE
2698
2699	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
2700
2701	!$acc parallel loop gang present( hom, rflags_invers, rmask, sums_l, vpt, w ) create( s1 )
2702	DO k = nzb, nzt_diff
2703	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2704	DO i = nxl, nxr
2705	DO j = nys, nyn
2706	s1 = s1 + 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
2707	vpt(k+1,j,i) - hom(k+1,1,44,sr) ) &
2708	* w(k,j,i) * rmask(j,i,sr) * rflags_invers(j,i,k+1)
2709	ENDDO
2710	ENDDO
2711	sums_l(k,46,tn) = s1
2712	ENDDO
2713	!$acc end parallel loop
2714
2715	ELSEIF ( ws_scheme_sca .AND. sr == 0 ) THEN
2716
2717	!$acc parallel loop present( hom, sums_l )
2718	DO k = nzb, nzt_diff
2719	sums_l(k,46,tn) = ( 1.0_wp + 0.61_wp * hom(k,1,41,sr) ) * sums_l(k,17,tn) + &
2720	0.61_wp * hom(k,1,4,sr) * sums_l(k,49,tn)
2721	ENDDO
2722	!$acc end parallel loop
2723
2724	ENDIF
2725
2726	ENDIF
2727
2728	ENDIF
2729	!
2730	!-- Passive scalar flux
2731	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca .OR. sr /= 0 ) ) THEN
2732
2733	!$acc parallel loop gang present( hom, q, rflags_invers, rmask, sums_l, w ) create( s1 )
2734	DO k = nzb, nzt_diff
2735	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2736	DO i = nxl, nxr
2737	DO j = nys, nyn
2738	s1 = s1 + 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
2739	q(k+1,j,i) - hom(k+1,1,41,sr) ) &
2740	* w(k,j,i) * rmask(j,i,sr) &
2741	* rflags_invers(j,i,k+1)
2742	ENDDO
2743	ENDDO
2744	sums_l(k,49,tn) = s1
2745	ENDDO
2746	!$acc end parallel loop
2747
2748	ENDIF
2749
2750	!
2751	!-- For speed optimization fluxes which have been computed in part directly
2752	!-- inside the WS advection routines are treated seperatly
2753	!-- Momentum fluxes first:
2754	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
2755
2756	!$OMP DO
2757	!$acc parallel loop gang present( hom, rflags_invers, rmask, sums_l, u, v, w ) create( s1, s2 )
2758	DO k = nzb, nzt_diff
2759	!$acc loop vector collapse( 2 ) reduction( +: s1, s2 )
2760	DO i = nxl, nxr
2761	DO j = nys, nyn
2762	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
2763	u(k+1,j,i) - hom(k+1,1,1,sr) )
2764	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
2765	v(k+1,j,i) - hom(k+1,1,2,sr) )
2766	!
2767	!-- Momentum flux wu
2768	s1 = s1 + 0.5_wp * ( w(k,j,i-1) + w(k,j,i) ) &
2769	* ust * rmask(j,i,sr) &
2770	* rflags_invers(j,i,k+1)
2771	!
2772	!-- Momentum flux wv
2773	s2 = s2 + 0.5_wp * ( w(k,j-1,i) + w(k,j,i) ) &
2774	* vst * rmask(j,i,sr) &
2775	* rflags_invers(j,i,k+1)
2776	ENDDO
2777	ENDDO
2778	sums_l(k,13,tn) = s1
2779	sums_l(k,15,tn) = s1
2780	ENDDO
2781	!$acc end parallel loop
2782
2783	ENDIF
2784
2785	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
2786
2787	!$OMP DO
2788	!$acc parallel loop gang present( hom, pt, rflags_invers, rmask, sums_l, w ) create( s1 )
2789	DO k = nzb, nzt_diff
2790	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2791	DO i = nxl, nxr
2792	DO j = nys, nyn
2793	!
2794	!-- Vertical heat flux
2795	s1 = s1 + 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
2796	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
2797	* w(k,j,i) * rmask(j,i,sr) &
2798	* rflags_invers(j,i,k+1)
2799	ENDDO
2800	ENDDO
2801	sums_l(k,17,tn) = s1
2802	ENDDO
2803	!$acc end parallel loop
2804
2805	IF ( humidity ) THEN
2806
2807	!$acc parallel loop gang present( hom, q, rflags_invers, rmask, sums_l, w ) create( s1 )
2808	DO k = nzb, nzt_diff
2809	!$acc loop vector collapse( 2 ) reduction( +: s1 )
2810	DO i = nxl, nxr
2811	DO j = nys, nyn
2812	s1 = s1 + 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
2813	q(k+1,j,i) - hom(k+1,1,41,sr) ) &
2814	* w(k,j,i) * rmask(j,i,sr) &
2815	* rflags_invers(j,i,k+1)
2816	ENDDO
2817	ENDDO
2818	sums_l(k,49,tn) = s1
2819	ENDDO
2820	!$acc end parallel loop
2821
2822	ENDIF
2823
2824	ENDIF
2825
2826
2827	!
2828	!-- Density at top follows Neumann condition
2829	IF ( ocean ) THEN
2830	!$acc parallel present( sums_l )
2831	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
2832	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
2833	!$acc end parallel
2834	ENDIF
2835
2836	!
2837	!-- Divergence of vertical flux of resolved scale energy and pressure
2838	!-- fluctuations as well as flux of pressure fluctuation itself (68).
2839	!-- First calculate the products, then the divergence.
2840	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
2841	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) THEN
2842
2843	STOP '+++ openACC porting for vertical flux div of resolved scale TKE in flow_statistics is still missing'
2844	sums_ll = 0.0_wp ! local array
2845
2846	!$OMP DO
2847	DO i = nxl, nxr
2848	DO j = nys, nyn
2849	DO k = nzb_s_inner(j,i)+1, nzt
2850
2851	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
2852	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) &
2853	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) &
2854	) )**2 &
2855	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) &
2856	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) &
2857	) )**2 &
2858	+ w(k,j,i)**2 )
2859
2860	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
2861	* ( p(k,j,i) + p(k+1,j,i) )
2862
2863	ENDDO
2864	ENDDO
2865	ENDDO
2866	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
2867	sums_ll(nzt+1,1) = 0.0_wp
2868	sums_ll(0,2) = 0.0_wp
2869	sums_ll(nzt+1,2) = 0.0_wp
2870
2871	DO k = nzb+1, nzt
2872	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
2873	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
2874	sums_l(k,68,tn) = sums_ll(k,2)
2875	ENDDO
2876	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
2877	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
2878	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
2879
2880	ENDIF
2881
2882	!
2883	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
2884	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) THEN
2885
2886	STOP '+++ openACC porting for vertical flux div of SGS TKE in flow_statistics is still missing'
2887	!$OMP DO
2888	DO i = nxl, nxr
2889	DO j = nys, nyn
2890	DO k = nzb_s_inner(j,i)+1, nzt
2891
2892	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
2893	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
2894	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
2895	) * ddzw(k)
2896
2897	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
2898	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
2899	)
2900
2901	ENDDO
2902	ENDDO
2903	ENDDO
2904	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
2905	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
2906
2907	ENDIF
2908
2909	!
2910	!-- Horizontal heat fluxes (subgrid, resolved, total).
2911	!-- Do it only, if profiles shall be plotted.
2912	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
2913
2914	STOP '+++ openACC porting for horizontal flux calculation in flow_statistics is still missing'
2915	!$OMP DO
2916	DO i = nxl, nxr
2917	DO j = nys, nyn
2918	DO k = nzb_s_inner(j,i)+1, nzt
2919	!
2920	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
2921	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
2922	( kh(k,j,i) + kh(k,j,i-1) ) &
2923	* ( pt(k,j,i-1) - pt(k,j,i) ) &
2924	* ddx * rmask(j,i,sr)
2925	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
2926	( kh(k,j,i) + kh(k,j-1,i) ) &
2927	* ( pt(k,j-1,i) - pt(k,j,i) ) &
2928	* ddy * rmask(j,i,sr)
2929	!
2930	!-- Resolved horizontal heat fluxes upt, vpt
2931	sums_l(k,59,tn) = sums_l(k,59,tn) + &
2932	( u(k,j,i) - hom(k,1,1,sr) ) * 0.5_wp * &
2933	( pt(k,j,i-1) - hom(k,1,4,sr) + &
2934	pt(k,j,i) - hom(k,1,4,sr) )
2935	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
2936	pt(k,j,i) - hom(k,1,4,sr) )
2937	sums_l(k,62,tn) = sums_l(k,62,tn) + &
2938	( v(k,j,i) - hom(k,1,2,sr) ) * 0.5_wp * &
2939	( pt(k,j-1,i) - hom(k,1,4,sr) + &
2940	pt(k,j,i) - hom(k,1,4,sr) )
2941	ENDDO
2942	ENDDO
2943	ENDDO
2944	!
2945	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
2946	sums_l(nzb,58,tn) = 0.0_wp
2947	sums_l(nzb,59,tn) = 0.0_wp
2948	sums_l(nzb,60,tn) = 0.0_wp
2949	sums_l(nzb,61,tn) = 0.0_wp
2950	sums_l(nzb,62,tn) = 0.0_wp
2951	sums_l(nzb,63,tn) = 0.0_wp
2952
2953	ENDIF
2954
2955	!
2956	!-- Collect current large scale advection and subsidence tendencies for
2957	!-- data output
2958	IF ( large_scale_forcing .AND. ( simulated_time .GT. 0.0_wp ) ) THEN
2959	!
2960	!-- Interpolation in time of LSF_DATA
2961	nt = 1
2962	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
2963	nt = nt + 1
2964	ENDDO
2965	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
2966	nt = nt - 1
2967	ENDIF
2968
2969	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
2970	/ ( time_vert(nt+1)-time_vert(nt) )
2971
2972
2973	DO k = nzb, nzt
2974	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
2975	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
2976	sums_ls_l(k,1) = td_lsa_q(k,nt) &
2977	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
2978	ENDDO
2979
2980	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
2981	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
2982
2983	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
2984
2985	DO k = nzb, nzt
2986	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
2987	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
2988	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
2989	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
2990	ENDDO
2991
2992	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
2993	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
2994
2995	ENDIF
2996
2997	ENDIF
2998
2999
3000	IF ( land_surface ) THEN
3001	!$OMP DO
3002	DO i = nxl, nxr
3003	DO j = nys, nyn
3004	DO k = nzb_soil, nzt_soil
3005	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil(k,j,i) * rmask(j,i,sr)
3006	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil(k,j,i) * rmask(j,i,sr)
3007	ENDDO
3008	ENDDO
3009	ENDDO
3010	ENDIF
3011
3012
3013	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
3014	!$OMP DO
3015	DO i = nxl, nxr
3016	DO j = nys, nyn
3017	DO k = nzb_s_inner(j,i)+1, nzt+1
3018	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_lw_in(k,j,i) * rmask(j,i,sr)
3019	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_lw_out(k,j,i) * rmask(j,i,sr)
3020	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_sw_in(k,j,i) * rmask(j,i,sr)
3021	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_sw_out(k,j,i) * rmask(j,i,sr)
3022	ENDDO
3023	ENDDO
3024	ENDDO
3025	ENDIF
3026
3027	!
3028	!-- Calculate the user-defined profiles
3029	CALL user_statistics( 'profiles', sr, tn )
3030	!$OMP END PARALLEL
3031
3032	!
3033	!-- Summation of thread sums
3034	IF ( threads_per_task > 1 ) THEN
3035	STOP '+++ openACC porting for threads_per_task > 1 in flow_statistics is still missing'
3036	DO i = 1, threads_per_task-1
3037	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
3038	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
3039	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
3040	sums_l(:,45:pr_palm,i)
3041	IF ( max_pr_user > 0 ) THEN
3042	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
3043	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
3044	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
3045	ENDIF
3046	ENDDO
3047	ENDIF
3048
3049	!$acc update host( hom, sums, sums_l )
3050
3051	#if defined( __parallel )
3052
3053	!
3054	!-- Compute total sum from local sums
3055	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
3056	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
3057	MPI_SUM, comm2d, ierr )
3058	IF ( large_scale_forcing ) THEN
3059	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
3060	MPI_REAL, MPI_SUM, comm2d, ierr )
3061	ENDIF
3062	#else
3063	sums = sums_l(:,:,0)
3064	IF ( large_scale_forcing ) THEN
3065	sums(:,81:88) = sums_ls_l
3066	ENDIF
3067	#endif
3068
3069	!
3070	!-- Final values are obtained by division by the total number of grid points
3071	!-- used for summation. After that store profiles.
3072	!-- Profiles:
3073	DO k = nzb, nzt+1
3074	sums(k,3) = sums(k,3) / ngp_2dh(sr)
3075	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
3076	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
3077	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
3078	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
3079	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
3080	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
3081	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
3082	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
3083	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
3084	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
3085	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
3086	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
3087	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
3088	sums(k,89:105) = sums(k,89:105) / ngp_2dh(sr)
3089	sums(k,106:pr_palm-2) = sums(k,106:pr_palm-2)/ ngp_2dh_s_inner(k,sr)
3090	ENDDO
3091
3092	!-- Upstream-parts
3093	sums(nzb:nzb+11,pr_palm-1) = sums(nzb:nzb+11,pr_palm-1) / ngp_3d(sr)
3094	!-- u* and so on
3095	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
3096	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
3097	!-- above the topography, they are being divided by ngp_2dh(sr)
3098	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
3099	ngp_2dh(sr)
3100	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
3101	ngp_2dh(sr)
3102	!-- eges, e*
3103	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
3104	ngp_3d(sr)
3105	!-- Old and new divergence
3106	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
3107	ngp_3d_inner(sr)
3108
3109	!-- User-defined profiles
3110	IF ( max_pr_user > 0 ) THEN
3111	DO k = nzb, nzt+1
3112	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
3113	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
3114	ngp_2dh_s_inner(k,sr)
3115	ENDDO
3116	ENDIF
3117
3118	!
3119	!-- Collect horizontal average in hom.
3120	!-- Compute deduced averages (e.g. total heat flux)
3121	hom(:,1,3,sr) = sums(:,3) ! w
3122	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
3123	hom(:,1,9,sr) = sums(:,9) ! km
3124	hom(:,1,10,sr) = sums(:,10) ! kh
3125	hom(:,1,11,sr) = sums(:,11) ! l
3126	hom(:,1,12,sr) = sums(:,12) ! w"u"
3127	hom(:,1,13,sr) = sums(:,13) ! wu
3128	hom(:,1,14,sr) = sums(:,14) ! w"v"
3129	hom(:,1,15,sr) = sums(:,15) ! wv
3130	hom(:,1,16,sr) = sums(:,16) ! w"pt"
3131	hom(:,1,17,sr) = sums(:,17) ! wpt
3132	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
3133	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
3134	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
3135	hom(:,1,21,sr) = sums(:,21) ! wptBC
3136	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
3137	! profile 24 is initial profile (sa)
3138	! profiles 25-29 left empty for initial
3139	! profiles
3140	hom(:,1,30,sr) = sums(:,30) ! u*2
3141	hom(:,1,31,sr) = sums(:,31) ! v*2
3142	hom(:,1,32,sr) = sums(:,32) ! w*2
3143	hom(:,1,33,sr) = sums(:,33) ! pt*2
3144	hom(:,1,34,sr) = sums(:,34) ! e*
3145	hom(:,1,35,sr) = sums(:,35) ! w2pt
3146	hom(:,1,36,sr) = sums(:,36) ! wpt2
3147	hom(:,1,37,sr) = sums(:,37) ! we
3148	hom(:,1,38,sr) = sums(:,38) ! w*3
3149	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
3150	hom(:,1,40,sr) = sums(:,40) ! p
3151	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
3152	hom(:,1,46,sr) = sums(:,46) ! wvpt
3153	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
3154	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
3155	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
3156	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
3157	hom(:,1,51,sr) = sums(:,51) ! w"qv"
3158	hom(:,1,52,sr) = sums(:,52) ! wqv
3159	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
3160	hom(:,1,54,sr) = sums(:,54) ! ql
3161	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
3162	hom(:,1,56,sr) = sums(:,56) ! wp/dz
3163	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho )/dz
3164	hom(:,1,58,sr) = sums(:,58) ! u"pt"
3165	hom(:,1,59,sr) = sums(:,59) ! upt
3166	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
3167	hom(:,1,61,sr) = sums(:,61) ! v"pt"
3168	hom(:,1,62,sr) = sums(:,62) ! vpt
3169	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
3170	hom(:,1,64,sr) = sums(:,64) ! rho
3171	hom(:,1,65,sr) = sums(:,65) ! w"sa"
3172	hom(:,1,66,sr) = sums(:,66) ! wsa
3173	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
3174	hom(:,1,68,sr) = sums(:,68) ! wp
3175	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho
3176	hom(:,1,70,sr) = sums(:,70) ! q*2
3177	hom(:,1,71,sr) = sums(:,71) ! prho
3178	hom(:,1,72,sr) = hyp * 1E-4_wp ! hyp in dbar
3179	hom(:,1,73,sr) = sums(:,73) ! nr
3180	hom(:,1,74,sr) = sums(:,74) ! qr
3181	hom(:,1,75,sr) = sums(:,75) ! qc
3182	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
3183	! 77 is initial density profile
3184	hom(:,1,78,sr) = ug ! ug
3185	hom(:,1,79,sr) = vg ! vg
3186	hom(:,1,80,sr) = w_subs ! w_subs
3187
3188	IF ( large_scale_forcing ) THEN
3189	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
3190	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
3191	IF ( use_subsidence_tendencies ) THEN
3192	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
3193	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
3194	ELSE
3195	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
3196	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
3197	ENDIF
3198	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
3199	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
3200	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
3201	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
3202	END IF
3203
3204	hom(:,1,pr_palm-1,sr) = sums(:,pr_palm-1)
3205	! upstream-parts u_x, u_y, u_z, v_x,
3206	! v_y, usw. (in last but one profile)
3207	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
3208	! u, w'u', w'v', t (in last profile)
3209
3210	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
3211	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
3212	sums(:,pr_palm+1:pr_palm+max_pr_user)
3213	ENDIF
3214
3215	!
3216	!-- Determine the boundary layer height using two different schemes.
3217	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
3218	!-- first relative minimum (maximum) of the total heat flux.
3219	!-- The corresponding height is assumed as the boundary layer height, if it
3220	!-- is less than 1.5 times the height where the heat flux becomes negative
3221	!-- (positive) for the first time.
3222	z_i(1) = 0.0_wp
3223	first = .TRUE.
3224
3225	IF ( ocean ) THEN
3226	DO k = nzt, nzb+1, -1
3227	IF ( first .AND. hom(k,1,18,sr) < 0.0_wp &
3228	.AND. abs(hom(k,1,18,sr)) > 1.0E-8_wp ) THEN
3229	first = .FALSE.
3230	height = zw(k)
3231	ENDIF
3232	IF ( hom(k,1,18,sr) < 0.0_wp .AND. &
3233	abs(hom(k,1,18,sr)) > 1.0E-8_wp .AND. &
3234	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
3235	IF ( zw(k) < 1.5_wp * height ) THEN
3236	z_i(1) = zw(k)
3237	ELSE
3238	z_i(1) = height
3239	ENDIF
3240	EXIT
3241	ENDIF
3242	ENDDO
3243	ELSE
3244	DO k = nzb, nzt-1
3245	IF ( first .AND. hom(k,1,18,sr) < 0.0_wp &
3246	.AND. abs(hom(k,1,18,sr)) > 1.0E-8_wp ) THEN
3247	first = .FALSE.
3248	height = zw(k)
3249	ENDIF
3250	IF ( hom(k,1,18,sr) < 0.0 .AND. &
3251	abs(hom(k,1,18,sr)) > 1.0E-8_wp .AND. &
3252	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
3253	IF ( zw(k) < 1.5_wp * height ) THEN
3254	z_i(1) = zw(k)
3255	ELSE
3256	z_i(1) = height
3257	ENDIF
3258	EXIT
3259	ENDIF
3260	ENDDO
3261	ENDIF
3262
3263	!
3264	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
3265	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
3266	!-- maximal local temperature gradient: starting from the second (the last
3267	!-- but one) vertical gridpoint, the local gradient must be at least
3268	!-- 0.2K/100m and greater than the next four gradients.
3269	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
3270	!-- ocean case!
3271	z_i(2) = 0.0_wp
3272	DO k = nzb+1, nzt+1
3273	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
3274	ENDDO
3275	dptdz_threshold = 0.2_wp / 100.0_wp
3276
3277	IF ( ocean ) THEN
3278	DO k = nzt+1, nzb+5, -1
3279	IF ( dptdz(k) > dptdz_threshold .AND. &
3280	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND. &
3281	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
3282	z_i(2) = zw(k-1)
3283	EXIT
3284	ENDIF
3285	ENDDO
3286	ELSE
3287	DO k = nzb+1, nzt-3
3288	IF ( dptdz(k) > dptdz_threshold .AND. &
3289	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND. &
3290	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
3291	z_i(2) = zw(k-1)
3292	EXIT
3293	ENDIF
3294	ENDDO
3295	ENDIF
3296
3297	hom(nzb+6,1,pr_palm,sr) = z_i(1)
3298	hom(nzb+7,1,pr_palm,sr) = z_i(2)
3299
3300	!
3301	!-- Computation of both the characteristic vertical velocity and
3302	!-- the characteristic convective boundary layer temperature.
3303	!-- The horizontal average at nzb+1 is input for the average temperature.
3304	IF ( hom(nzb,1,18,sr) > 0.0_wp .AND. abs(hom(nzb,1,18,sr)) > 1.0E-8_wp &
3305	.AND. z_i(1) /= 0.0_wp ) THEN
3306	hom(nzb+8,1,pr_palm,sr) = ( g / hom(nzb+1,1,4,sr) * &
3307	hom(nzb,1,18,sr) * &
3308	ABS( z_i(1) ) )**0.333333333_wp
3309	!-- so far this only works if Prandtl layer is used
3310	hom(nzb+11,1,pr_palm,sr) = hom(nzb,1,16,sr) / hom(nzb+8,1,pr_palm,sr)
3311	ELSE
3312	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
3313	hom(nzb+11,1,pr_palm,sr) = 0.0_wp
3314	ENDIF
3315
3316	!
3317	!-- Collect the time series quantities
3318	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
3319	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
3320	ts_value(3,sr) = dt_3d
3321	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
3322	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
3323	ts_value(6,sr) = u_max
3324	ts_value(7,sr) = v_max
3325	ts_value(8,sr) = w_max
3326	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
3327	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
3328	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
3329	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
3330	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
3331	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
3332	ts_value(15,sr) = hom(nzb+1,1,16,sr) ! w'pt' at k=1
3333	ts_value(16,sr) = hom(nzb+1,1,18,sr) ! wpt at k=1
3334	ts_value(17,sr) = hom(nzb,1,4,sr) ! pt(0)
3335	ts_value(18,sr) = hom(nzb+1,1,4,sr) ! pt(zp)
3336	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
3337	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
3338	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
3339
3340	IF ( ts_value(5,sr) /= 0.0_wp ) THEN
3341	ts_value(22,sr) = ts_value(4,sr)**2_wp / &
3342	( kappa * g * ts_value(5,sr) / ts_value(18,sr) ) ! L
3343	ELSE
3344	ts_value(22,sr) = 10000.0_wp
3345	ENDIF
3346
3347	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
3348
3349	!
3350	!-- Collect land surface model timeseries
3351	IF ( land_surface ) THEN
3352	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf_eb
3353	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! shf_eb
3354	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_eb
3355	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_liq_eb
3356	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! qsws_soil_eb
3357	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! qsws_veg_eb
3358	ts_value(dots_soil+6,sr) = hom(nzb,1,99,sr) ! r_a
3359	ts_value(dots_soil+7,sr) = hom(nzb,1,100,sr) ! r_s
3360	ENDIF
3361	!
3362	!-- Collect radiation model timeseries
3363	IF ( radiation ) THEN
3364	ts_value(dots_rad,sr) = hom(nzb,1,101,sr) ! rad_net
3365	ts_value(dots_rad+1,sr) = hom(nzb,1,102,sr) ! rad_lw_in
3366	ts_value(dots_rad+2,sr) = hom(nzb,1,103,sr) ! rad_lw_out
3367	ts_value(dots_rad+3,sr) = hom(nzb,1,104,sr) ! rad_lw_in
3368	ts_value(dots_rad+4,sr) = hom(nzb,1,105,sr) ! rad_lw_out
3369
3370	#if defined ( __rrtmg )
3371	IF ( radiation_scheme == 'rrtmg' ) THEN
3372	ts_value(dots_rad+5,sr) = hom(nzb,1,106,sr) ! rrtm_aldif
3373	ts_value(dots_rad+6,sr) = hom(nzb,1,107,sr) ! rrtm_aldir
3374	ts_value(dots_rad+7,sr) = hom(nzb,1,108,sr) ! rrtm_asdif
3375	ts_value(dots_rad+8,sr) = hom(nzb,1,109,sr) ! rrtm_asdir
3376	ENDIF
3377	#endif
3378
3379	ENDIF
3380
3381	!
3382	!-- Calculate additional statistics provided by the user interface
3383	CALL user_statistics( 'time_series', sr, 0 )
3384
3385	ENDDO ! loop of the subregions
3386
3387	!$acc end data
3388
3389	!
3390	!-- If required, sum up horizontal averages for subsequent time averaging
3391	IF ( do_sum ) THEN
3392	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
3393	hom_sum = hom_sum + hom(:,1,:,:)
3394	average_count_pr = average_count_pr + 1
3395	do_sum = .FALSE.
3396	ENDIF
3397
3398	!
3399	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
3400	!-- This flag is reset after each time step in time_integration.
3401	flow_statistics_called = .TRUE.
3402
3403	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
3404
3405
3406	END SUBROUTINE flow_statistics
3407	#endif

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |