Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 4462

Last change on this file since 4462 was 4444, checked in by raasch, 5 years ago
bugfix: cpp-directives for serial mode added
Property svn:keywords set to `Id`
File size: 106.5 KB

Rev	Line
[1682]	1	!> @file flow_statistics.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[4360]	17	! Copyright 1997-2020 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[3298]	21	! ------------------
[1961]	22	!
[4442]	23	!
[1739]	24	! Former revisions:
	25	! -----------------
	26	! $Id: flow_statistics.f90 4444 2020-03-05 15:59:50Z Giersch $
[4444]	27	! bugfix: cpp-directives for serial mode added
	28	!
	29	! 4442 2020-03-04 19:21:13Z suehring
[4442]	30	! Change order of dimension in surface array %frac to allow for better
	31	! vectorization.
	32	!
	33	! 4441 2020-03-04 19:20:35Z suehring
[4346]	34	! Introduction of wall_flags_total_0, which currently sets bits based on static
	35	! topography information used in wall_flags_static_0
	36	!
	37	! 4329 2019-12-10 15:46:36Z motisi
[4329]	38	! Renamed wall_flags_0 to wall_flags_static_0
	39	!
	40	! 4182 2019-08-22 15:20:23Z scharf
[4182]	41	! Corrected "Former revisions" section
	42	!
	43	! 4131 2019-08-02 11:06:18Z monakurppa
[4131]	44	! Allow profile output for salsa variables.
	45	!
	46	! 4039 2019-06-18 10:32:41Z suehring
[4039]	47	! Correct conversion to kinematic scalar fluxes in case of pw-scheme and
	48	! statistic regions
	49	!
	50	! 3828 2019-03-27 19:36:23Z raasch
[3828]	51	! unused variables removed
	52	!
	53	! 3676 2019-01-16 15:07:05Z knoop
[3651]	54	! Bugfix, terminate OMP Parallel block
[3298]	55	!
[4182]	56	! Revision 1.1 1997/08/11 06:15:17 raasch
	57	! Initial revision
	58	!
	59	!
[1]	60	! Description:
	61	! ------------
[1682]	62	!> Compute average profiles and further average flow quantities for the different
	63	!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
	64	!>
	65	!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
	66	!> lower vertical index for k-loops for all variables, although strictly
	67	!> speaking the k-loops would have to be split up according to the staggered
	68	!> grid. However, this implies no error since staggered velocity components
	69	!> are zero at the walls and inside buildings.
[1]	70	!------------------------------------------------------------------------------!
[1682]	71	SUBROUTINE flow_statistics
[1]	72
[3298]	73
[1320]	74	USE arrays_3d, &
[2037]	75	ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
[2292]	76	momentumflux_output_conversion, nc, nr, p, prho, prr, pt, q, &
[2232]	77	qc, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
[3274]	78	sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, &
	79	zw, d_exner
[3298]	80
[3274]	81	USE basic_constants_and_equations_mod, &
[3298]	82	ONLY: g, lv_d_cp
	83
[3637]	84	USE bulk_cloud_model_mod, &
	85	ONLY: bulk_cloud_model, microphysics_morrison, microphysics_seifert
[3298]	86
	87	USE chem_modules, &
	88	ONLY: max_pr_cs
	89
[1320]	90	USE control_parameters, &
[3298]	91	ONLY: air_chemistry, average_count_pr, cloud_droplets, do_sum, &
[3274]	92	dt_3d, humidity, initializing_actions, land_surface, &
[3003]	93	large_scale_forcing, large_scale_subsidence, max_pr_user, &
[3294]	94	message_string, neutral, ocean_mode, passive_scalar, &
	95	simulated_time, simulated_time_at_begin, &
	96	use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
[4131]	97	ws_scheme_mom, ws_scheme_sca, salsa, max_pr_salsa
[3298]	98
[1320]	99	USE cpulog, &
[1551]	100	ONLY: cpu_log, log_point
[3298]	101
[1320]	102	USE grid_variables, &
[1551]	103	ONLY: ddx, ddy
[1320]	104
	105	USE indices, &
[4444]	106	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, nxl, nxr, nyn, &
	107	nys, nzb, nzt, topo_min_level, wall_flags_total_0
	108
	109	#if defined( __parallel )
	110	USE indices, &
	111	ONLY: ngp_sums, ngp_sums_ls
	112	#endif
[1320]	113
	114	USE kinds
	115
[1551]	116	USE land_surface_model_mod, &
[2232]	117	ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
[1551]	118
[2320]	119	USE lsf_nudging_mod, &
	120	ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
	121
[3637]	122	USE module_interface, &
	123	ONLY: module_interface_statistics
	124
[1783]	125	USE netcdf_interface, &
[2817]	126	ONLY: dots_rad, dots_soil, dots_max
[1783]	127
[1]	128	USE pegrid
[1551]	129
	130	USE radiation_model_mod, &
[2696]	131	ONLY: radiation, radiation_scheme, &
[1691]	132	rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
	133	rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
[1585]	134
[1]	135	USE statistics
	136
[3828]	137	USE surface_mod, &
	138	ONLY : surf_def_h, surf_lsm_h, surf_usm_h
[1691]	139
[2232]	140
[1]	141	IMPLICIT NONE
	142
[1682]	143	INTEGER(iwp) :: i !<
	144	INTEGER(iwp) :: j !<
	145	INTEGER(iwp) :: k !<
[2232]	146	INTEGER(iwp) :: ki !<
[1738]	147	INTEGER(iwp) :: k_surface_level !<
[2232]	148	INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
	149	INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
[1682]	150	INTEGER(iwp) :: nt !<
[3241]	151	!$ INTEGER(iwp) :: omp_get_thread_num !<
[1682]	152	INTEGER(iwp) :: sr !<
	153	INTEGER(iwp) :: tn !<
[2232]	154
[1682]	155	LOGICAL :: first !<
[1320]	156
[1682]	157	REAL(wp) :: dptdz_threshold !<
	158	REAL(wp) :: fac !<
[2232]	159	REAL(wp) :: flag !<
[1682]	160	REAL(wp) :: height !<
	161	REAL(wp) :: pts !<
	162	REAL(wp) :: sums_l_etot !<
	163	REAL(wp) :: ust !<
	164	REAL(wp) :: ust2 !<
	165	REAL(wp) :: u2 !<
	166	REAL(wp) :: vst !<
	167	REAL(wp) :: vst2 !<
	168	REAL(wp) :: v2 !<
	169	REAL(wp) :: w2 !<
[1320]	170
[1682]	171	REAL(wp) :: dptdz(nzb+1:nzt+1) !<
	172	REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
[1]	173
	174	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
	175
[1221]	176
[1]	177	!
	178	!-- To be on the safe side, check whether flow_statistics has already been
	179	!-- called once after the current time step
	180	IF ( flow_statistics_called ) THEN
[254]	181
[274]	182	message_string = 'flow_statistics is called two times within one ' // &
	183	'timestep'
[254]	184	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
[1007]	185
[1]	186	ENDIF
	187
	188	!
	189	!-- Compute statistics for each (sub-)region
	190	DO sr = 0, statistic_regions
	191
	192	!
	193	!-- Initialize (local) summation array
[1353]	194	sums_l = 0.0_wp
[3658]	195	#ifdef _OPENACC
	196	!$ACC KERNELS PRESENT(sums_l)
	197	sums_l = 0.0_wp
	198	!$ACC END KERNELS
	199	#endif
[1]	200
	201	!
	202	!-- Store sums that have been computed in other subroutines in summation
	203	!-- array
	204	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
	205	!-- WARNING: next line still has to be adjusted for OpenMP
[2037]	206	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
	207	heatflux_output_conversion ! heat flux from advec_s_bc
[87]	208	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
	209	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
[1]	210
[667]	211	!
[1498]	212	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
	213	!-- scale) vertical fluxes and velocity variances by using commonly-
	214	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
	215	!-- in combination with the 5th order advection scheme, pronounced
	216	!-- artificial kinks could be observed in the vertical profiles near the
	217	!-- surface. Please note: these kinks were not related to the model truth,
	218	!-- i.e. these kinks are just related to an evaluation problem.
	219	!-- In order avoid these kinks, vertical fluxes and horizontal as well
	220	!-- vertical velocity variances are calculated directly within the advection
	221	!-- routines, according to the numerical discretization, to evaluate the
	222	!-- statistical quantities as they will appear within the prognostic
	223	!-- equations.
[667]	224	!-- Copy the turbulent quantities, evaluated in the advection routines to
[1498]	225	!-- the local array sums_l() for further computations.
[743]	226	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
[696]	227
[1007]	228	!
[673]	229	!-- According to the Neumann bc for the horizontal velocity components,
	230	!-- the corresponding fluxes has to satisfiy the same bc.
[3294]	231	IF ( ocean_mode ) THEN
[801]	232	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
[1007]	233	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
[673]	234	ENDIF
[696]	235
	236	DO i = 0, threads_per_task-1
[1007]	237	!
[696]	238	!-- Swap the turbulent quantities evaluated in advec_ws.
[2037]	239	sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
	240	* momentumflux_output_conversion ! wu
	241	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
	242	* momentumflux_output_conversion ! wv
[801]	243	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
	244	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
	245	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
[1353]	246	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
[1320]	247	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
[801]	248	sums_ws2_ws_l(:,i) ) ! e*
[667]	249	ENDDO
[696]	250
[667]	251	ENDIF
[696]	252
[1567]	253	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[696]	254
	255	DO i = 0, threads_per_task-1
[2037]	256	sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
	257	* heatflux_output_conversion ! wpt
[3294]	258	IF ( ocean_mode ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
[2037]	259	IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
	260	* waterflux_output_conversion ! wq
[2270]	261	IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! ws
[696]	262	ENDDO
	263
[667]	264	ENDIF
[305]	265	!
[1]	266	!-- Horizontally averaged profiles of horizontal velocities and temperature.
	267	!-- They must have been computed before, because they are already required
	268	!-- for other horizontal averages.
	269	tn = 0
[2232]	270	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	271	!$ tn = omp_get_thread_num()
[1]	272	!$OMP DO
[3658]	273	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag) &
[4346]	274	!$ACC PRESENT(wall_flags_total_0, u, v, pt, rmask, sums_l)
[1]	275	DO i = nxl, nxr
	276	DO j = nys, nyn
[2232]	277	DO k = nzb, nzt+1
[4346]	278	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[3658]	279	!$ACC ATOMIC
[2232]	280	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
	281	* flag
[3658]	282	!$ACC ATOMIC
[2232]	283	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
	284	* flag
[3658]	285	!$ACC ATOMIC
[2232]	286	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
	287	* flag
[1]	288	ENDDO
	289	ENDDO
	290	ENDDO
[3658]	291	!$ACC UPDATE HOST(sums_l(:,1,tn), sums_l(:,2,tn), sums_l(:,4,tn))
[1]	292
	293	!
[96]	294	!-- Horizontally averaged profile of salinity
[3294]	295	IF ( ocean_mode ) THEN
[96]	296	!$OMP DO
	297	DO i = nxl, nxr
	298	DO j = nys, nyn
[2232]	299	DO k = nzb, nzt+1
	300	sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
	301	* rmask(j,i,sr) &
	302	* MERGE( 1.0_wp, 0.0_wp, &
[4346]	303	BTEST( wall_flags_total_0(k,j,i), 22 ) )
[96]	304	ENDDO
	305	ENDDO
	306	ENDDO
	307	ENDIF
	308
	309	!
[1]	310	!-- Horizontally averaged profiles of virtual potential temperature,
[3040]	311	!-- total water content, water vapor mixing ratio and liquid water potential
[1]	312	!-- temperature
[75]	313	IF ( humidity ) THEN
[1]	314	!$OMP DO
	315	DO i = nxl, nxr
	316	DO j = nys, nyn
[2232]	317	DO k = nzb, nzt+1
[4346]	318	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	319	sums_l(k,44,tn) = sums_l(k,44,tn) + &
	320	vpt(k,j,i) * rmask(j,i,sr) * flag
	321	sums_l(k,41,tn) = sums_l(k,41,tn) + &
	322	q(k,j,i) * rmask(j,i,sr) * flag
[1]	323	ENDDO
	324	ENDDO
	325	ENDDO
[3274]	326	IF ( bulk_cloud_model ) THEN
[1]	327	!$OMP DO
	328	DO i = nxl, nxr
	329	DO j = nys, nyn
[2232]	330	DO k = nzb, nzt+1
[4346]	331	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	332	sums_l(k,42,tn) = sums_l(k,42,tn) + &
	333	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
	334	* flag
	335	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
[3274]	336	pt(k,j,i) + lv_d_cp * d_exner(k) * ql(k,j,i) &
[2232]	337	) * rmask(j,i,sr) &
	338	* flag
[1]	339	ENDDO
	340	ENDDO
	341	ENDDO
	342	ENDIF
	343	ENDIF
	344
	345	!
	346	!-- Horizontally averaged profiles of passive scalar
	347	IF ( passive_scalar ) THEN
	348	!$OMP DO
	349	DO i = nxl, nxr
	350	DO j = nys, nyn
[2232]	351	DO k = nzb, nzt+1
[2270]	352	sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
[2232]	353	* rmask(j,i,sr) &
	354	* MERGE( 1.0_wp, 0.0_wp, &
[4346]	355	BTEST( wall_flags_total_0(k,j,i), 22 ) )
[1]	356	ENDDO
	357	ENDDO
	358	ENDDO
	359	ENDIF
	360	!$OMP END PARALLEL
	361	!
	362	!-- Summation of thread sums
	363	IF ( threads_per_task > 1 ) THEN
	364	DO i = 1, threads_per_task-1
	365	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
	366	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
	367	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
[3294]	368	IF ( ocean_mode ) THEN
[96]	369	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
	370	ENDIF
[75]	371	IF ( humidity ) THEN
[1]	372	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
	373	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
[3274]	374	IF ( bulk_cloud_model ) THEN
[1]	375	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
	376	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
	377	ENDIF
	378	ENDIF
	379	IF ( passive_scalar ) THEN
[2270]	380	sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
[1]	381	ENDIF
	382	ENDDO
	383	ENDIF
	384
	385	#if defined( __parallel )
	386	!
	387	!-- Compute total sum from local sums
[622]	388	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	389	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
[1]	390	MPI_SUM, comm2d, ierr )
[622]	391	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	392	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
[1]	393	MPI_SUM, comm2d, ierr )
[622]	394	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	395	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
[1]	396	MPI_SUM, comm2d, ierr )
[3294]	397	IF ( ocean_mode ) THEN
[622]	398	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	399	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
[96]	400	MPI_REAL, MPI_SUM, comm2d, ierr )
	401	ENDIF
[75]	402	IF ( humidity ) THEN
[622]	403	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	404	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
[1]	405	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	406	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	407	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
[1]	408	MPI_REAL, MPI_SUM, comm2d, ierr )
[3274]	409	IF ( bulk_cloud_model ) THEN
[622]	410	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	411	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
[1]	412	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	413	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	414	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
[1]	415	MPI_REAL, MPI_SUM, comm2d, ierr )
	416	ENDIF
	417	ENDIF
	418
	419	IF ( passive_scalar ) THEN
[622]	420	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2270]	421	CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
[1]	422	MPI_REAL, MPI_SUM, comm2d, ierr )
	423	ENDIF
	424	#else
	425	sums(:,1) = sums_l(:,1,0)
	426	sums(:,2) = sums_l(:,2,0)
	427	sums(:,4) = sums_l(:,4,0)
[3294]	428	IF ( ocean_mode ) sums(:,23) = sums_l(:,23,0)
[75]	429	IF ( humidity ) THEN
[1]	430	sums(:,44) = sums_l(:,44,0)
	431	sums(:,41) = sums_l(:,41,0)
[3274]	432	IF ( bulk_cloud_model ) THEN
[1]	433	sums(:,42) = sums_l(:,42,0)
	434	sums(:,43) = sums_l(:,43,0)
	435	ENDIF
	436	ENDIF
[2270]	437	IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
[1]	438	#endif
	439
	440	!
	441	!-- Final values are obtained by division by the total number of grid points
	442	!-- used for summation. After that store profiles.
[132]	443	sums(:,1) = sums(:,1) / ngp_2dh(sr)
	444	sums(:,2) = sums(:,2) / ngp_2dh(sr)
	445	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
[1]	446	hom(:,1,1,sr) = sums(:,1) ! u
	447	hom(:,1,2,sr) = sums(:,2) ! v
	448	hom(:,1,4,sr) = sums(:,4) ! pt
[3658]	449	!$ACC UPDATE DEVICE(hom(:,1,1,sr), hom(:,1,2,sr), hom(:,1,4,sr))
[1]	450
[667]	451
[1]	452	!
[96]	453	!-- Salinity
[3294]	454	IF ( ocean_mode ) THEN
[132]	455	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
[96]	456	hom(:,1,23,sr) = sums(:,23) ! sa
	457	ENDIF
	458
	459	!
[1]	460	!-- Humidity and cloud parameters
[75]	461	IF ( humidity ) THEN
[132]	462	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
	463	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
[1]	464	hom(:,1,44,sr) = sums(:,44) ! vpt
	465	hom(:,1,41,sr) = sums(:,41) ! qv (q)
[3274]	466	IF ( bulk_cloud_model ) THEN
[132]	467	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
	468	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
[1]	469	hom(:,1,42,sr) = sums(:,42) ! qv
	470	hom(:,1,43,sr) = sums(:,43) ! pt
	471	ENDIF
	472	ENDIF
	473
	474	!
	475	!-- Passive scalar
[2270]	476	IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
[1960]	477	ngp_2dh_s_inner(:,sr) ! s
[1]	478
	479	!
	480	!-- Horizontally averaged profiles of the remaining prognostic variables,
	481	!-- variances, the total and the perturbation energy (single values in last
	482	!-- column of sums_l) and some diagnostic quantities.
[132]	483	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	484	!-- ---- speaking the following k-loop would have to be split up and
	485	!-- rearranged according to the staggered grid.
[132]	486	!-- However, this implies no error since staggered velocity components
	487	!-- are zero at the walls and inside buildings.
[1]	488	tn = 0
[3241]	489	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, &
[1815]	490	!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
[2232]	491	!$OMP w2, flag, m, ki, l )
	492	!$ tn = omp_get_thread_num()
[1]	493	!$OMP DO
[3658]	494	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, m) &
	495	!$ACC PRIVATE(sums_l_etot, flag) &
[4346]	496	!$ACC PRESENT(wall_flags_total_0, rmask, momentumflux_output_conversion) &
[3658]	497	!$ACC PRESENT(hom(:,1,4,sr)) &
	498	!$ACC PRESENT(e, u, v, w, km, kh, p, pt) &
	499	!$ACC PRESENT(surf_def_h(0), surf_lsm_h, surf_usm_h) &
	500	!$ACC PRESENT(sums_l)
[1]	501	DO i = nxl, nxr
	502	DO j = nys, nyn
[1353]	503	sums_l_etot = 0.0_wp
[2232]	504	DO k = nzb, nzt+1
[4346]	505	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[1]	506	!
	507	!-- Prognostic and diagnostic variables
[3658]	508	!$ACC ATOMIC
[2232]	509	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
	510	* flag
[3658]	511	!$ACC ATOMIC
[2232]	512	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
	513	* flag
[3658]	514	!$ACC ATOMIC
[2232]	515	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
	516	* flag
[3658]	517	!$ACC ATOMIC
[2232]	518	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
	519	* flag
[3658]	520	!$ACC ATOMIC
[2252]	521	sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
	522	/ momentumflux_output_conversion(k) ) &
	523	* flag
[1]	524
[3658]	525	!$ACC ATOMIC
[1]	526	sums_l(k,33,tn) = sums_l(k,33,tn) + &
[2232]	527	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)&
	528	* flag
[3658]	529	#ifndef _OPENACC
[624]	530	IF ( humidity ) THEN
	531	sums_l(k,70,tn) = sums_l(k,70,tn) + &
[2232]	532	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)&
	533	* flag
[624]	534	ENDIF
[1960]	535	IF ( passive_scalar ) THEN
[2270]	536	sums_l(k,116,tn) = sums_l(k,116,tn) + &
	537	( s(k,j,i)-hom(k,1,115,sr) )*2 rmask(j,i,sr)&
[2232]	538	* flag
[1960]	539	ENDIF
[3658]	540	#endif
[699]	541	!
	542	!-- Higher moments
	543	!-- (Computation of the skewness of w further below)
[3658]	544	!$ACC ATOMIC
[2232]	545	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr) &
	546	* flag
[667]	547
[1]	548	sums_l_etot = sums_l_etot + &
[2232]	549	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
	550	w(k,j,i)*2 ) rmask(j,i,sr)&
	551	* flag
[1]	552	ENDDO
	553	!
	554	!-- Total and perturbation energy for the total domain (being
	555	!-- collected in the last column of sums_l). Summation of these
	556	!-- quantities is seperated from the previous loop in order to
	557	!-- allow vectorization of that loop.
[3658]	558	!$ACC ATOMIC
[87]	559	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
[1]	560	!
	561	!-- 2D-arrays (being collected in the last column of sums_l)
[2773]	562	IF ( surf_def_h(0)%end_index(j,i) >= &
[2696]	563	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	564	m = surf_def_h(0)%start_index(j,i)
[3658]	565	!$ACC ATOMIC
[2773]	566	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	567	surf_def_h(0)%us(m) * rmask(j,i,sr)
[3658]	568	!$ACC ATOMIC
[2773]	569	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	570	surf_def_h(0)%usws(m) * rmask(j,i,sr)
[3658]	571	!$ACC ATOMIC
[2773]	572	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	573	surf_def_h(0)%vsws(m) * rmask(j,i,sr)
[3658]	574	!$ACC ATOMIC
[2773]	575	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	576	surf_def_h(0)%ts(m) * rmask(j,i,sr)
[3658]	577	#ifndef _OPENACC
[2232]	578	IF ( humidity ) THEN
[2773]	579	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	580	surf_def_h(0)%qs(m) * rmask(j,i,sr)
	581	ENDIF
	582	IF ( passive_scalar ) THEN
[2773]	583	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	584	surf_def_h(0)%ss(m) * rmask(j,i,sr)
	585	ENDIF
[3658]	586	#endif
[2773]	587	!
	588	!-- Summation of surface temperature.
[3658]	589	!$ACC ATOMIC
[2773]	590	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	591	surf_def_h(0)%pt_surface(m) * &
	592	rmask(j,i,sr)
[197]	593	ENDIF
[2696]	594	IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
[2232]	595	m = surf_lsm_h%start_index(j,i)
[3658]	596	!$ACC ATOMIC
[2773]	597	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	598	surf_lsm_h%us(m) * rmask(j,i,sr)
[3658]	599	!$ACC ATOMIC
[2773]	600	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	601	surf_lsm_h%usws(m) * rmask(j,i,sr)
[3658]	602	!$ACC ATOMIC
[2773]	603	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	604	surf_lsm_h%vsws(m) * rmask(j,i,sr)
[3658]	605	!$ACC ATOMIC
[2773]	606	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	607	surf_lsm_h%ts(m) * rmask(j,i,sr)
[3658]	608	#ifndef _OPENACC
[2232]	609	IF ( humidity ) THEN
[2773]	610	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	611	surf_lsm_h%qs(m) * rmask(j,i,sr)
	612	ENDIF
	613	IF ( passive_scalar ) THEN
[2773]	614	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	615	surf_lsm_h%ss(m) * rmask(j,i,sr)
	616	ENDIF
[3658]	617	#endif
[2773]	618	!
	619	!-- Summation of surface temperature.
[3658]	620	!$ACC ATOMIC
[2773]	621	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	622	surf_lsm_h%pt_surface(m) * &
	623	rmask(j,i,sr)
[1960]	624	ENDIF
[2696]	625	IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
	626	m = surf_usm_h%start_index(j,i)
[3658]	627	!$ACC ATOMIC
[2773]	628	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	629	surf_usm_h%us(m) * rmask(j,i,sr)
[3658]	630	!$ACC ATOMIC
[2773]	631	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	632	surf_usm_h%usws(m) * rmask(j,i,sr)
[3658]	633	!$ACC ATOMIC
[2773]	634	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	635	surf_usm_h%vsws(m) * rmask(j,i,sr)
[3658]	636	!$ACC ATOMIC
[2773]	637	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	638	surf_usm_h%ts(m) * rmask(j,i,sr)
[3658]	639	#ifndef _OPENACC
[2232]	640	IF ( humidity ) THEN
[2773]	641	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	642	surf_usm_h%qs(m) * rmask(j,i,sr)
	643	ENDIF
	644	IF ( passive_scalar ) THEN
[2773]	645	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	646	surf_usm_h%ss(m) * rmask(j,i,sr)
	647	ENDIF
[3658]	648	#endif
[2773]	649	!
	650	!-- Summation of surface temperature.
[3658]	651	!$ACC ATOMIC
[2773]	652	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	653	surf_usm_h%pt_surface(m) * &
	654	rmask(j,i,sr)
[2232]	655	ENDIF
[1]	656	ENDDO
	657	ENDDO
[3658]	658	!$ACC UPDATE &
	659	!$ACC HOST(sums_l(:,3,tn), sums_l(:,8,tn), sums_l(:,9,tn)) &
	660	!$ACC HOST(sums_l(:,10,tn), sums_l(:,40,tn), sums_l(:,33,tn)) &
	661	!$ACC HOST(sums_l(:,38,tn)) &
	662	!$ACC HOST(sums_l(nzb:nzb+4,pr_palm,tn), sums_l(nzb+14:nzb+14,pr_palm,tn))
[1]	663
	664	!
[667]	665	!-- Computation of statistics when ws-scheme is not used. Else these
	666	!-- quantities are evaluated in the advection routines.
[1918]	667	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
	668	THEN
[667]	669	!$OMP DO
	670	DO i = nxl, nxr
	671	DO j = nys, nyn
[2232]	672	DO k = nzb, nzt+1
[4346]	673	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	674
[667]	675	u2 = u(k,j,i)**2
	676	v2 = v(k,j,i)**2
	677	w2 = w(k,j,i)**2
	678	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	679	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	680
[2232]	681	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
	682	* flag
	683	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
	684	* flag
	685	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
	686	* flag
[667]	687	!
[2026]	688	!-- Perturbation energy
[667]	689
[1353]	690	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
[2232]	691	( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
	692	* flag
[667]	693	ENDDO
	694	ENDDO
	695	ENDDO
	696	ENDIF
[2026]	697	!
	698	!-- Computaion of domain-averaged perturbation energy. Please note,
	699	!-- to prevent that perturbation energy is larger (even if only slightly)
	700	!-- than the total kinetic energy, calculation is based on deviations from
	701	!-- the horizontal mean, instead of spatial descretization of the advection
	702	!-- term.
	703	!$OMP DO
[3658]	704	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag, w2, ust2, vst2) &
[4346]	705	!$ACC PRESENT(wall_flags_total_0, u, v, w, rmask, hom(:,1,1:2,sr)) &
[3658]	706	!$ACC PRESENT(sums_l)
[2026]	707	DO i = nxl, nxr
	708	DO j = nys, nyn
[2232]	709	DO k = nzb, nzt+1
[4346]	710	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	711
[2026]	712	w2 = w(k,j,i)**2
	713	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	714	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	715	w2 = w(k,j,i)**2
[1241]	716
[3658]	717	!$ACC ATOMIC
[2026]	718	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
[2232]	719	+ 0.5_wp * ( ust2 + vst2 + w2 ) &
	720	* rmask(j,i,sr) &
	721	* flag
[2026]	722	ENDDO
	723	ENDDO
	724	ENDDO
[3658]	725	!$ACC UPDATE HOST(sums_l(nzb+5:nzb+5,pr_palm,tn))
[2026]	726
[667]	727	!
[1]	728	!-- Horizontally averaged profiles of the vertical fluxes
[667]	729
[1]	730	!$OMP DO
[3658]	731	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, l, m) &
	732	!$ACC PRIVATE(ki, flag, ust, vst, pts) &
	733	!$ACC PRESENT(kh, km, u, v, w, pt) &
[4346]	734	!$ACC PRESENT(wall_flags_total_0, rmask, ddzu, rho_air_zw, hom(:,1,1:4,sr)) &
[3658]	735	!$ACC PRESENT(heatflux_output_conversion, momentumflux_output_conversion) &
	736	!$ACC PRESENT(surf_def_h(0:2), surf_lsm_h, surf_usm_h) &
	737	!$ACC PRESENT(sums_l)
[1]	738	DO i = nxl, nxr
	739	DO j = nys, nyn
	740	!
	741	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
	742	!-- oterwise from k=nzb+1)
[132]	743	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
[1]	744	!-- ---- strictly speaking the following k-loop would have to be
	745	!-- split up according to the staggered grid.
[132]	746	!-- However, this implies no error since staggered velocity
	747	!-- components are zero at the walls and inside buildings.
[2232]	748	!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
	749	!-- which are added further below.
	750	DO k = nzb, nzt
	751	flag = MERGE( 1.0_wp, 0.0_wp, &
[4346]	752	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
[2232]	753	MERGE( 1.0_wp, 0.0_wp, &
[4346]	754	BTEST( wall_flags_total_0(k,j,i), 9 ) )
[1]	755	!
	756	!-- Momentum flux w"u"
[3658]	757	!$ACC ATOMIC
[1353]	758	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
[1]	759	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
	760	) * ( &
	761	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
	762	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
[2037]	763	) * rmask(j,i,sr) &
	764	* rho_air_zw(k) &
[2232]	765	* momentumflux_output_conversion(k) &
	766	* flag
[1]	767	!
	768	!-- Momentum flux w"v"
[3658]	769	!$ACC ATOMIC
[1353]	770	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
[1]	771	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
	772	) * ( &
	773	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
	774	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
[2037]	775	) * rmask(j,i,sr) &
	776	* rho_air_zw(k) &
[2232]	777	* momentumflux_output_conversion(k) &
	778	* flag
[1]	779	!
	780	!-- Heat flux w"pt"
[3658]	781	!$ACC ATOMIC
[1]	782	sums_l(k,16,tn) = sums_l(k,16,tn) &
[1353]	783	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	784	* ( pt(k+1,j,i) - pt(k,j,i) ) &
[2037]	785	* rho_air_zw(k) &
	786	* heatflux_output_conversion(k) &
[2232]	787	* ddzu(k+1) * rmask(j,i,sr) &
	788	* flag
[1]	789
	790	!
[96]	791	!-- Salinity flux w"sa"
[3658]	792	#ifndef _OPENACC
[3294]	793	IF ( ocean_mode ) THEN
[96]	794	sums_l(k,65,tn) = sums_l(k,65,tn) &
[1353]	795	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[96]	796	* ( sa(k+1,j,i) - sa(k,j,i) ) &
[2232]	797	* ddzu(k+1) * rmask(j,i,sr) &
	798	* flag
[96]	799	ENDIF
	800
	801	!
[1]	802	!-- Buoyancy flux, water flux (humidity flux) w"q"
[75]	803	IF ( humidity ) THEN
[1]	804	sums_l(k,45,tn) = sums_l(k,45,tn) &
[1353]	805	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	806	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
[2037]	807	* rho_air_zw(k) &
	808	* heatflux_output_conversion(k) &
[2232]	809	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	810	sums_l(k,48,tn) = sums_l(k,48,tn) &
[1353]	811	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	812	* ( q(k+1,j,i) - q(k,j,i) ) &
[2037]	813	* rho_air_zw(k) &
	814	* waterflux_output_conversion(k)&
[2232]	815	* ddzu(k+1) * rmask(j,i,sr) * flag
[1007]	816
[3274]	817	IF ( bulk_cloud_model ) THEN
[1]	818	sums_l(k,51,tn) = sums_l(k,51,tn) &
[1353]	819	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	820	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
	821	- ( q(k,j,i) - ql(k,j,i) ) ) &
[2037]	822	* rho_air_zw(k) &
	823	* waterflux_output_conversion(k)&
[2232]	824	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	825	ENDIF
	826	ENDIF
	827
	828	!
	829	!-- Passive scalar flux
	830	IF ( passive_scalar ) THEN
[2270]	831	sums_l(k,117,tn) = sums_l(k,117,tn) &
[1353]	832	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[2026]	833	* ( s(k+1,j,i) - s(k,j,i) ) &
[2232]	834	* ddzu(k+1) * rmask(j,i,sr) &
	835	* flag
[1]	836	ENDIF
[3658]	837	#endif
[1]	838
	839	ENDDO
	840
	841	!
	842	!-- Subgridscale fluxes in the Prandtl layer
	843	IF ( use_surface_fluxes ) THEN
[2232]	844	DO l = 0, 1
[3658]	845	! The original code using MERGE doesn't work with the PGI
	846	! compiler when running on the GPU.
[3676]	847	! This is submitted as a compiler Bug in PGI ticket TPR#26718
[3658]	848	! ki = MERGE( -1, 0, l == 0 )
	849	ki = -1 + l
[2232]	850	IF ( surf_def_h(l)%ns >= 1 ) THEN
[2696]	851	DO m = surf_def_h(l)%start_index(j,i), &
	852	surf_def_h(l)%end_index(j,i)
[2232]	853	k = surf_def_h(l)%k(m)
	854
[3658]	855	!$ACC ATOMIC
[2232]	856	sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
	857	momentumflux_output_conversion(k+ki) * &
	858	surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	859	!$ACC ATOMIC
[2232]	860	sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
	861	momentumflux_output_conversion(k+ki) * &
	862	surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	863	!$ACC ATOMIC
[2232]	864	sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
	865	heatflux_output_conversion(k+ki) * &
	866	surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	867	#if 0
[2232]	868	sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
	869	0.0_wp * rmask(j,i,sr) ! u"pt"
	870	sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
	871	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	872	#endif
	873	#ifndef _OPENACC
[3294]	874	IF ( ocean_mode ) THEN
[2232]	875	sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
	876	surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
	877	ENDIF
	878	IF ( humidity ) THEN
	879	sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
	880	waterflux_output_conversion(k+ki) * &
	881	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	882	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	883	( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
	884	surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
	885	surf_def_h(l)%qsws(m) ) &
	886	* heatflux_output_conversion(k+ki)
	887	IF ( cloud_droplets ) THEN
	888	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	889	( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
	890	ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
	891	0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
	892	* heatflux_output_conversion(k+ki)
	893	ENDIF
[3274]	894	IF ( bulk_cloud_model ) THEN
[2232]	895	!
	896	!-- Formula does not work if ql(k+ki) /= 0.0
	897	sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
	898	waterflux_output_conversion(k+ki) * &
	899	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	900	ENDIF
	901	ENDIF
	902	IF ( passive_scalar ) THEN
[2270]	903	sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
[2232]	904	surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
	905	ENDIF
[3658]	906	#endif
[2232]	907
	908	ENDDO
	909
	910	ENDIF
	911	ENDDO
[2696]	912	IF ( surf_lsm_h%end_index(j,i) >= &
	913	surf_lsm_h%start_index(j,i) ) THEN
[2232]	914	m = surf_lsm_h%start_index(j,i)
[3658]	915	!$ACC ATOMIC
[2232]	916	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
[2037]	917	momentumflux_output_conversion(nzb) * &
[2232]	918	surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	919	!$ACC ATOMIC
[2232]	920	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
[2037]	921	momentumflux_output_conversion(nzb) * &
[2232]	922	surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	923	!$ACC ATOMIC
[2232]	924	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
[2037]	925	heatflux_output_conversion(nzb) * &
[2232]	926	surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	927	#if 0
[2232]	928	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
[1353]	929	0.0_wp * rmask(j,i,sr) ! u"pt"
[2232]	930	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
[1353]	931	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	932	#endif
	933	#ifndef _OPENACC
[3294]	934	IF ( ocean_mode ) THEN
[2232]	935	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	936	surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	937	ENDIF
	938	IF ( humidity ) THEN
	939	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
	940	waterflux_output_conversion(nzb) * &
	941	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	942	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	943	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
	944	surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	945	surf_lsm_h%qsws(m) ) &
	946	* heatflux_output_conversion(nzb)
	947	IF ( cloud_droplets ) THEN
	948	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	949	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
	950	ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
	951	0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
	952	* heatflux_output_conversion(nzb)
	953	ENDIF
[3274]	954	IF ( bulk_cloud_model ) THEN
[2232]	955	!
	956	!-- Formula does not work if ql(nzb) /= 0.0
	957	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
	958	waterflux_output_conversion(nzb) * &
	959	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	960	ENDIF
	961	ENDIF
	962	IF ( passive_scalar ) THEN
[2270]	963	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	964	surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	965	ENDIF
[3658]	966	#endif
[2232]	967
[96]	968	ENDIF
[2696]	969	IF ( surf_usm_h%end_index(j,i) >= &
	970	surf_usm_h%start_index(j,i) ) THEN
[2232]	971	m = surf_usm_h%start_index(j,i)
[3658]	972	!$ACC ATOMIC
[2232]	973	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
	974	momentumflux_output_conversion(nzb) * &
	975	surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	976	!$ACC ATOMIC
[2232]	977	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
	978	momentumflux_output_conversion(nzb) * &
	979	surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	980	!$ACC ATOMIC
[2232]	981	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
	982	heatflux_output_conversion(nzb) * &
	983	surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	984	#if 0
[2232]	985	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
	986	0.0_wp * rmask(j,i,sr) ! u"pt"
	987	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
	988	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	989	#endif
	990	#ifndef _OPENACC
[3294]	991	IF ( ocean_mode ) THEN
[2232]	992	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	993	surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	994	ENDIF
	995	IF ( humidity ) THEN
	996	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
[2037]	997	waterflux_output_conversion(nzb) * &
[2232]	998	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	999	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	1000	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
[2232]	1001	surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	1002	surf_usm_h%qsws(m) ) &
[2037]	1003	* heatflux_output_conversion(nzb)
[2232]	1004	IF ( cloud_droplets ) THEN
	1005	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	1006	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
[2232]	1007	ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
	1008	0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
[2037]	1009	* heatflux_output_conversion(nzb)
[2232]	1010	ENDIF
[3274]	1011	IF ( bulk_cloud_model ) THEN
[1]	1012	!
[2232]	1013	!-- Formula does not work if ql(nzb) /= 0.0
	1014	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
[2037]	1015	waterflux_output_conversion(nzb) * &
[2232]	1016	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1017	ENDIF
[1]	1018	ENDIF
[2232]	1019	IF ( passive_scalar ) THEN
[2270]	1020	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	1021	surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	1022	ENDIF
[3658]	1023	#endif
[2232]	1024
[1]	1025	ENDIF
[2232]	1026
[1]	1027	ENDIF
	1028
[3658]	1029	#ifndef _OPENACC
[1691]	1030	IF ( .NOT. neutral ) THEN
[2696]	1031	IF ( surf_def_h(0)%end_index(j,i) >= &
	1032	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	1033	m = surf_def_h(0)%start_index(j,i)
[2696]	1034	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1035	surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
	1036	ENDIF
[2696]	1037	IF ( surf_lsm_h%end_index(j,i) >= &
	1038	surf_lsm_h%start_index(j,i) ) THEN
[2232]	1039	m = surf_lsm_h%start_index(j,i)
[2696]	1040	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1041	surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
	1042	ENDIF
[2696]	1043	IF ( surf_usm_h%end_index(j,i) >= &
	1044	surf_usm_h%start_index(j,i) ) THEN
[2232]	1045	m = surf_usm_h%start_index(j,i)
[2696]	1046	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1047	surf_usm_h%ol(m) * rmask(j,i,sr) ! L
	1048	ENDIF
[1691]	1049	ENDIF
	1050
[2296]	1051	IF ( radiation ) THEN
[2696]	1052	IF ( surf_def_h(0)%end_index(j,i) >= &
	1053	surf_def_h(0)%start_index(j,i) ) THEN
	1054	m = surf_def_h(0)%start_index(j,i)
	1055	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1056	surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
	1057	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1058	surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
	1059	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1060	surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
	1061	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1062	surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
	1063	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1064	surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
	1065	ENDIF
	1066	IF ( surf_lsm_h%end_index(j,i) >= &
	1067	surf_lsm_h%start_index(j,i) ) THEN
	1068	m = surf_lsm_h%start_index(j,i)
	1069	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1070	surf_lsm_h%rad_net(m) * rmask(j,i,sr)
	1071	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1072	surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
	1073	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1074	surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
	1075	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1076	surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
	1077	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1078	surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
	1079	ENDIF
	1080	IF ( surf_usm_h%end_index(j,i) >= &
	1081	surf_usm_h%start_index(j,i) ) THEN
	1082	m = surf_usm_h%start_index(j,i)
	1083	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1084	surf_usm_h%rad_net(m) * rmask(j,i,sr)
	1085	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1086	surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
	1087	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1088	surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
	1089	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1090	surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
	1091	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1092	surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
	1093	ENDIF
[1585]	1094
	1095	#if defined ( __rrtmg )
	1096	IF ( radiation_scheme == 'rrtmg' ) THEN
[2696]	1097
	1098	IF ( surf_def_h(0)%end_index(j,i) >= &
	1099	surf_def_h(0)%start_index(j,i) ) THEN
	1100	m = surf_def_h(0)%start_index(j,i)
	1101	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[4441]	1102	surf_def_h(0)%rrtm_aldif(m,0) * rmask(j,i,sr)
[2696]	1103	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[4441]	1104	surf_def_h(0)%rrtm_aldir(m,0) * rmask(j,i,sr)
[2696]	1105	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[4441]	1106	surf_def_h(0)%rrtm_asdif(m,0) * rmask(j,i,sr)
[2696]	1107	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[4441]	1108	surf_def_h(0)%rrtm_asdir(m,0) * rmask(j,i,sr)
[2696]	1109	ENDIF
	1110	IF ( surf_lsm_h%end_index(j,i) >= &
	1111	surf_lsm_h%start_index(j,i) ) THEN
	1112	m = surf_lsm_h%start_index(j,i)
	1113	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[4441]	1114	SUM( surf_lsm_h%frac(m,:) * &
	1115	surf_lsm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
[2696]	1116	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[4441]	1117	SUM( surf_lsm_h%frac(m,:) * &
	1118	surf_lsm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
[2696]	1119	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[4441]	1120	SUM( surf_lsm_h%frac(m,:) * &
	1121	surf_lsm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
[2696]	1122	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[4441]	1123	SUM( surf_lsm_h%frac(m,:) * &
	1124	surf_lsm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
[2696]	1125	ENDIF
	1126	IF ( surf_usm_h%end_index(j,i) >= &
	1127	surf_usm_h%start_index(j,i) ) THEN
	1128	m = surf_usm_h%start_index(j,i)
	1129	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[4441]	1130	SUM( surf_usm_h%frac(m,:) * &
	1131	surf_usm_h%rrtm_aldif(m,:) ) * rmask(j,i,sr)
[2696]	1132	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[4441]	1133	SUM( surf_usm_h%frac(m,:) * &
	1134	surf_usm_h%rrtm_aldir(m,:) ) * rmask(j,i,sr)
[2696]	1135	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[4441]	1136	SUM( surf_usm_h%frac(m,:) * &
	1137	surf_usm_h%rrtm_asdif(m,:) ) * rmask(j,i,sr)
[2696]	1138	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[4441]	1139	SUM( surf_usm_h%frac(m,:) * &
	1140	surf_usm_h%rrtm_asdir(m,:) ) * rmask(j,i,sr)
[2696]	1141	ENDIF
	1142
[1585]	1143	ENDIF
	1144	#endif
[1551]	1145	ENDIF
[3658]	1146	#endif
[1]	1147	!
[19]	1148	!-- Subgridscale fluxes at the top surface
	1149	IF ( use_top_fluxes ) THEN
[2232]	1150	m = surf_def_h(2)%start_index(j,i)
[3658]	1151	!$ACC ATOMIC
	1152	sums_l(nzt,12,tn) = sums_l(nzt,12,tn) + &
	1153	momentumflux_output_conversion(nzt) * &
[2232]	1154	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	1155	!$ACC ATOMIC
	1156	sums_l(nzt+1,12,tn) = sums_l(nzt+1,12,tn) + &
	1157	momentumflux_output_conversion(nzt+1) * &
	1158	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
	1159	!$ACC ATOMIC
	1160	sums_l(nzt,14,tn) = sums_l(nzt,14,tn) + &
	1161	momentumflux_output_conversion(nzt) * &
[2232]	1162	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	1163	!$ACC ATOMIC
	1164	sums_l(nzt+1,14,tn) = sums_l(nzt+1,14,tn) + &
	1165	momentumflux_output_conversion(nzt+1) * &
	1166	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
	1167	!$ACC ATOMIC
	1168	sums_l(nzt,16,tn) = sums_l(nzt,16,tn) + &
	1169	heatflux_output_conversion(nzt) * &
[2232]	1170	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	1171	!$ACC ATOMIC
	1172	sums_l(nzt+1,16,tn) = sums_l(nzt+1,16,tn) + &
	1173	heatflux_output_conversion(nzt+1) * &
	1174	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
	1175	#if 0
[550]	1176	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
[1353]	1177	0.0_wp * rmask(j,i,sr) ! u"pt"
[550]	1178	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
[1353]	1179	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	1180	#endif
	1181	#ifndef _OPENACC
[3294]	1182	IF ( ocean_mode ) THEN
[96]	1183	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
[2232]	1184	surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
[96]	1185	ENDIF
[75]	1186	IF ( humidity ) THEN
[1353]	1187	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
[2037]	1188	waterflux_output_conversion(nzt) * &
[2232]	1189	surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
[1353]	1190	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1191	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
[2232]	1192	surf_def_h(2)%shf(m) + &
	1193	0.61_wp * pt(nzt,j,i) * &
	1194	surf_def_h(2)%qsws(m) ) &
[2037]	1195	* heatflux_output_conversion(nzt)
[1007]	1196	IF ( cloud_droplets ) THEN
[1353]	1197	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1198	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
[2232]	1199	ql(nzt,j,i) ) * &
	1200	surf_def_h(2)%shf(m) + &
	1201	0.61_wp * pt(nzt,j,i) * &
	1202	surf_def_h(2)%qsws(m) )&
[2037]	1203	* heatflux_output_conversion(nzt)
[1007]	1204	ENDIF
[3274]	1205	IF ( bulk_cloud_model ) THEN
[19]	1206	!
	1207	!-- Formula does not work if ql(nzb) /= 0.0
	1208	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
[2037]	1209	waterflux_output_conversion(nzt) * &
[2232]	1210	surf_def_h(2)%qsws(m) * rmask(j,i,sr)
[19]	1211	ENDIF
	1212	ENDIF
	1213	IF ( passive_scalar ) THEN
[2270]	1214	sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
[2232]	1215	surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
[19]	1216	ENDIF
[3658]	1217	#endif
[19]	1218	ENDIF
	1219
	1220	!
[1]	1221	!-- Resolved fluxes (can be computed for all horizontal points)
[132]	1222	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	1223	!-- ---- speaking the following k-loop would have to be split up and
	1224	!-- rearranged according to the staggered grid.
[2232]	1225	DO k = nzb, nzt
[4346]	1226	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[1353]	1227	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1228	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1229	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1230	v(k+1,j,i) - hom(k+1,1,2,sr) )
	1231	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
	1232	pt(k+1,j,i) - hom(k+1,1,4,sr) )
[667]	1233
[1]	1234	!-- Higher moments
[3658]	1235	!$ACC ATOMIC
[1353]	1236	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
[2232]	1237	rmask(j,i,sr) * flag
[3658]	1238	!$ACC ATOMIC
[1353]	1239	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
[2232]	1240	rmask(j,i,sr) * flag
[1]	1241
	1242	!
[96]	1243	!-- Salinity flux and density (density does not belong to here,
[97]	1244	!-- but so far there is no other suitable place to calculate)
[3658]	1245	#ifndef _OPENACC
[3294]	1246	IF ( ocean_mode ) THEN
[1567]	1247	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1248	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
	1249	sa(k+1,j,i) - hom(k+1,1,23,sr) )
	1250	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
[2232]	1251	rmask(j,i,sr) * flag
[667]	1252	ENDIF
[2232]	1253	sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
	1254	rmask(j,i,sr) * flag
[1353]	1255	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
[2232]	1256	rmask(j,i,sr) * flag
[96]	1257	ENDIF
	1258
	1259	!
[1053]	1260	!-- Buoyancy flux, water flux, humidity flux, liquid water
	1261	!-- content, rain drop concentration and rain water content
[75]	1262	IF ( humidity ) THEN
[3274]	1263	IF ( bulk_cloud_model .OR. cloud_droplets ) THEN
[1353]	1264	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
[1007]	1265	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
[1353]	1266	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[4039]	1267	rho_air_zw(k) * &
[2037]	1268	heatflux_output_conversion(k) * &
[2232]	1269	rmask(j,i,sr) * flag
	1270	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
	1271	* flag
[1822]	1272
[1053]	1273	IF ( .NOT. cloud_droplets ) THEN
[1353]	1274	pts = 0.5_wp * &
[1115]	1275	( ( q(k,j,i) - ql(k,j,i) ) - &
	1276	hom(k,1,42,sr) + &
	1277	( q(k+1,j,i) - ql(k+1,j,i) ) - &
[1053]	1278	hom(k+1,1,42,sr) )
[1115]	1279	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
[4039]	1280	rho_air_zw(k) * &
[2037]	1281	waterflux_output_conversion(k) * &
[2232]	1282	rmask(j,i,sr) * &
	1283	flag
[1822]	1284	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
[2232]	1285	rmask(j,i,sr) * &
	1286	flag
[1822]	1287	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
[2232]	1288	rmask(j,i,sr) * &
	1289	flag
[2292]	1290	IF ( microphysics_morrison ) THEN
	1291	sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
	1292	rmask(j,i,sr) *&
	1293	flag
	1294	ENDIF
[1822]	1295	IF ( microphysics_seifert ) THEN
	1296	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
[2232]	1297	rmask(j,i,sr) *&
	1298	flag
[1822]	1299	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
[2232]	1300	rmask(j,i,sr) *&
	1301	flag
[1053]	1302	ENDIF
	1303	ENDIF
[1822]	1304
[1007]	1305	ELSE
[1567]	1306	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1307	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
	1308	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
	1309	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[4039]	1310	rho_air_zw(k) * &
[2037]	1311	heatflux_output_conversion(k) * &
[2232]	1312	rmask(j,i,sr) * &
	1313	flag
[1567]	1314	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[2037]	1315	sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
	1316	hom(k,1,41,sr) ) * &
	1317	sums_l(k,17,tn) + &
	1318	0.61_wp * hom(k,1,4,sr) * &
	1319	sums_l(k,49,tn) &
[2232]	1320	) * heatflux_output_conversion(k) * &
	1321	flag
[1007]	1322	END IF
	1323	END IF
[1]	1324	ENDIF
	1325	!
	1326	!-- Passive scalar flux
[1353]	1327	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
[1567]	1328	.OR. sr /= 0 ) ) THEN
[2270]	1329	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1330	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1331	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1332	rmask(j,i,sr) * flag
[1]	1333	ENDIF
[3658]	1334	#endif
[1]	1335
	1336	!
	1337	!-- Energy flux we
[667]	1338	!-- has to be adjusted
[3658]	1339	!$ACC ATOMIC
[1353]	1340	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
	1341	( ust2 + vst2 + w(k,j,i)**2 ) &
[2674]	1342	* rho_air_zw(k) &
[2037]	1343	* momentumflux_output_conversion(k) &
[2232]	1344	* rmask(j,i,sr) * flag
[1]	1345	ENDDO
	1346	ENDDO
	1347	ENDDO
[2232]	1348	!$OMP END PARALLEL
[3658]	1349
	1350	!$ACC UPDATE &
	1351	!$ACC HOST(sums_l(:,12,tn), sums_l(:,14,tn), sums_l(:,16,tn)) &
	1352	!$ACC HOST(sums_l(:,35,tn), sums_l(:,36,tn), sums_l(:,37,tn))
[709]	1353	!
[2232]	1354	!-- Treat land-surface quantities according to new wall model structure.
	1355	IF ( land_surface ) THEN
	1356	tn = 0
	1357	!$OMP PARALLEL PRIVATE( i, j, m, tn )
	1358	!$ tn = omp_get_thread_num()
	1359	!$OMP DO
	1360	DO m = 1, surf_lsm_h%ns
	1361	i = surf_lsm_h%i(m)
	1362	j = surf_lsm_h%j(m)
	1363
	1364	IF ( i >= nxl .AND. i <= nxr .AND. &
	1365	j >= nys .AND. j <= nyn ) THEN
[2270]	1366	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
	1367	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
	1368	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
	1369	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
	1370	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
	1371	sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
[2232]	1372	ENDIF
	1373	ENDDO
	1374	!$OMP END PARALLEL
	1375
	1376	tn = 0
	1377	!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
	1378	!$ tn = omp_get_thread_num()
	1379	!$OMP DO
	1380	DO m = 1, surf_lsm_h%ns
	1381
	1382	i = surf_lsm_h%i(m)
	1383	j = surf_lsm_h%j(m)
	1384
	1385	IF ( i >= nxl .AND. i <= nxr .AND. &
	1386	j >= nys .AND. j <= nyn ) THEN
	1387
	1388	DO k = nzb_soil, nzt_soil
	1389	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
	1390	* rmask(j,i,sr)
	1391	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
	1392	* rmask(j,i,sr)
	1393	ENDDO
	1394	ENDIF
	1395	ENDDO
	1396	!$OMP END PARALLEL
	1397	ENDIF
	1398	!
[709]	1399	!-- For speed optimization fluxes which have been computed in part directly
	1400	!-- inside the WS advection routines are treated seperatly
	1401	!-- Momentum fluxes first:
[2232]	1402
	1403	tn = 0
	1404	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	1405	!$ tn = omp_get_thread_num()
[743]	1406	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
[2232]	1407	!$OMP DO
	1408	DO i = nxl, nxr
	1409	DO j = nys, nyn
	1410	DO k = nzb, nzt
[1007]	1411	!
[2232]	1412	!-- Flag 23 is used to mask surface fluxes as well as model-top
	1413	!-- fluxes, which are added further below.
	1414	flag = MERGE( 1.0_wp, 0.0_wp, &
[4346]	1415	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
[2232]	1416	MERGE( 1.0_wp, 0.0_wp, &
[4346]	1417	BTEST( wall_flags_total_0(k,j,i), 9 ) )
[2232]	1418
	1419	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1420	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1421	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1422	v(k+1,j,i) - hom(k+1,1,2,sr) )
[667]	1423	!
[2232]	1424	!-- Momentum flux wu
	1425	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
	1426	( w(k,j,i-1) + w(k,j,i) ) &
[2674]	1427	* rho_air_zw(k) &
[2232]	1428	* momentumflux_output_conversion(k) &
	1429	* ust * rmask(j,i,sr) &
	1430	* flag
	1431	!
	1432	!-- Momentum flux wv
	1433	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
	1434	( w(k,j-1,i) + w(k,j,i) ) &
[2674]	1435	* rho_air_zw(k) &
[2232]	1436	* momentumflux_output_conversion(k) &
	1437	* vst * rmask(j,i,sr) &
	1438	* flag
	1439	ENDDO
	1440	ENDDO
	1441	ENDDO
[1]	1442
[667]	1443	ENDIF
[1567]	1444	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[2232]	1445	!$OMP DO
	1446	DO i = nxl, nxr
	1447	DO j = nys, nyn
	1448	DO k = nzb, nzt
	1449	flag = MERGE( 1.0_wp, 0.0_wp, &
[4346]	1450	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
[2232]	1451	MERGE( 1.0_wp, 0.0_wp, &
[4346]	1452	BTEST( wall_flags_total_0(k,j,i), 9 ) )
[709]	1453	!
[2232]	1454	!-- Vertical heat flux
	1455	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
[1353]	1456	( pt(k,j,i) - hom(k,1,4,sr) + &
	1457	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
[4039]	1458	* rho_air_zw(k) &
[2037]	1459	* heatflux_output_conversion(k) &
[2232]	1460	* w(k,j,i) * rmask(j,i,sr) * flag
	1461	IF ( humidity ) THEN
	1462	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
[1353]	1463	q(k+1,j,i) - hom(k+1,1,41,sr) )
[2232]	1464	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
[4039]	1465	rho_air_zw(k) * &
[2037]	1466	waterflux_output_conversion(k) * &
[2232]	1467	rmask(j,i,sr) * flag
	1468	ENDIF
	1469	IF ( passive_scalar ) THEN
[2270]	1470	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1471	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1472	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1473	rmask(j,i,sr) * flag
	1474	ENDIF
	1475	ENDDO
	1476	ENDDO
	1477	ENDDO
[667]	1478
	1479	ENDIF
	1480
[1]	1481	!
[97]	1482	!-- Density at top follows Neumann condition
[3294]	1483	IF ( ocean_mode ) THEN
[388]	1484	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
	1485	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
	1486	ENDIF
[97]	1487
	1488	!
[1]	1489	!-- Divergence of vertical flux of resolved scale energy and pressure
[106]	1490	!-- fluctuations as well as flux of pressure fluctuation itself (68).
	1491	!-- First calculate the products, then the divergence.
[1]	1492	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
[1691]	1493	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
	1494	THEN
[1353]	1495	sums_ll = 0.0_wp ! local array
[1]	1496
	1497	!$OMP DO
	1498	DO i = nxl, nxr
	1499	DO j = nys, nyn
[2232]	1500	DO k = nzb+1, nzt
[4346]	1501	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[1]	1502
[1353]	1503	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
[1652]	1504	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
	1505	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
	1506	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
[1654]	1507	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
[2232]	1508	+ w(k,j,i)*2 ) flag
[1]	1509
[1353]	1510	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
[2252]	1511	* ( ( p(k,j,i) + p(k+1,j,i) ) &
	1512	/ momentumflux_output_conversion(k) ) &
	1513	* flag
[1]	1514
	1515	ENDDO
	1516	ENDDO
	1517	ENDDO
[1353]	1518	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
	1519	sums_ll(nzt+1,1) = 0.0_wp
	1520	sums_ll(0,2) = 0.0_wp
	1521	sums_ll(nzt+1,2) = 0.0_wp
[1]	1522
[678]	1523	DO k = nzb+1, nzt
[1]	1524	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
	1525	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
[106]	1526	sums_l(k,68,tn) = sums_ll(k,2)
[1]	1527	ENDDO
	1528	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
	1529	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
[1353]	1530	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
[1]	1531
	1532	ENDIF
	1533
	1534	!
[106]	1535	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
[1691]	1536	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
	1537	THEN
[1]	1538	!$OMP DO
	1539	DO i = nxl, nxr
	1540	DO j = nys, nyn
[2232]	1541	DO k = nzb+1, nzt
[1]	1542
[4346]	1543	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[2232]	1544
[1353]	1545	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
[1]	1546	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
	1547	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
[2232]	1548	) * ddzw(k) &
	1549	* flag
[1]	1550
[1353]	1551	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
[106]	1552	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
[2232]	1553	) * flag
[106]	1554
[1]	1555	ENDDO
	1556	ENDDO
	1557	ENDDO
	1558	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
[106]	1559	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
[1]	1560
	1561	ENDIF
	1562
	1563	!
	1564	!-- Horizontal heat fluxes (subgrid, resolved, total).
	1565	!-- Do it only, if profiles shall be plotted.
[1353]	1566	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
[1]	1567
	1568	!$OMP DO
	1569	DO i = nxl, nxr
	1570	DO j = nys, nyn
[2232]	1571	DO k = nzb+1, nzt
[4346]	1572	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[1]	1573	!
	1574	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
[1353]	1575	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
[1]	1576	( kh(k,j,i) + kh(k,j,i-1) ) &
	1577	* ( pt(k,j,i-1) - pt(k,j,i) ) &
[2037]	1578	* rho_air_zw(k) &
	1579	* heatflux_output_conversion(k) &
[2232]	1580	* ddx * rmask(j,i,sr) * flag
[1353]	1581	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
[1]	1582	( kh(k,j,i) + kh(k,j-1,i) ) &
	1583	* ( pt(k,j-1,i) - pt(k,j,i) ) &
[2037]	1584	* rho_air_zw(k) &
	1585	* heatflux_output_conversion(k) &
[2232]	1586	* ddy * rmask(j,i,sr) * flag
[1]	1587	!
	1588	!-- Resolved horizontal heat fluxes upt, vpt
	1589	sums_l(k,59,tn) = sums_l(k,59,tn) + &
	1590	( u(k,j,i) - hom(k,1,1,sr) ) &
[1353]	1591	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
[2037]	1592	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1593	* heatflux_output_conversion(k) &
	1594	* flag
[1353]	1595	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
	1596	pt(k,j,i) - hom(k,1,4,sr) )
[1]	1597	sums_l(k,62,tn) = sums_l(k,62,tn) + &
	1598	( v(k,j,i) - hom(k,1,2,sr) ) &
[1353]	1599	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
[2037]	1600	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1601	* heatflux_output_conversion(k) &
	1602	* flag
[1]	1603	ENDDO
	1604	ENDDO
	1605	ENDDO
	1606	!
	1607	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
[1353]	1608	sums_l(nzb,58,tn) = 0.0_wp
	1609	sums_l(nzb,59,tn) = 0.0_wp
	1610	sums_l(nzb,60,tn) = 0.0_wp
	1611	sums_l(nzb,61,tn) = 0.0_wp
	1612	sums_l(nzb,62,tn) = 0.0_wp
	1613	sums_l(nzb,63,tn) = 0.0_wp
[1]	1614
	1615	ENDIF
[2073]	1616	!$OMP END PARALLEL
[87]	1617
	1618	!
[1365]	1619	!-- Collect current large scale advection and subsidence tendencies for
	1620	!-- data output
[1691]	1621	IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
[1365]	1622	!
	1623	!-- Interpolation in time of LSF_DATA
	1624	nt = 1
[1386]	1625	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
[1365]	1626	nt = nt + 1
	1627	ENDDO
[1386]	1628	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
[1365]	1629	nt = nt - 1
	1630	ENDIF
	1631
[1386]	1632	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
[1365]	1633	/ ( time_vert(nt+1)-time_vert(nt) )
	1634
	1635
	1636	DO k = nzb, nzt
[1382]	1637	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
	1638	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
	1639	sums_ls_l(k,1) = td_lsa_q(k,nt) &
	1640	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
[1365]	1641	ENDDO
	1642
[1382]	1643	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
	1644	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
	1645
[1365]	1646	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
	1647
	1648	DO k = nzb, nzt
[1382]	1649	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
	1650	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
	1651	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
	1652	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
[1365]	1653	ENDDO
	1654
[1382]	1655	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
	1656	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
	1657
[1365]	1658	ENDIF
	1659
	1660	ENDIF
	1661
[2232]	1662	tn = 0
[2073]	1663	!$OMP PARALLEL PRIVATE( i, j, k, tn )
[2232]	1664	!$ tn = omp_get_thread_num()
[1585]	1665	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
	1666	!$OMP DO
	1667	DO i = nxl, nxr
	1668	DO j = nys, nyn
[2232]	1669	DO k = nzb+1, nzt+1
[4346]	1670	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[2232]	1671
[2270]	1672	sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
[2232]	1673	* rmask(j,i,sr) * flag
[2270]	1674	sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
[2232]	1675	* rmask(j,i,sr) * flag
[2270]	1676	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
[2232]	1677	* rmask(j,i,sr) * flag
[2270]	1678	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
[2232]	1679	* rmask(j,i,sr) * flag
[2270]	1680	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
[2232]	1681	* rmask(j,i,sr) * flag
[2270]	1682	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
[2232]	1683	* rmask(j,i,sr) * flag
[2270]	1684	sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
[2232]	1685	* rmask(j,i,sr) * flag
[2270]	1686	sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
[2232]	1687	* rmask(j,i,sr) * flag
[1585]	1688	ENDDO
	1689	ENDDO
	1690	ENDDO
	1691	ENDIF
[3637]	1692
[1365]	1693	!
[3637]	1694	!-- Calculate the profiles for all other modules
	1695	CALL module_interface_statistics( 'profiles', sr, tn, dots_max )
[3651]	1696	!$OMP END PARALLEL
[1]	1697
	1698	!
	1699	!-- Summation of thread sums
	1700	IF ( threads_per_task > 1 ) THEN
	1701	DO i = 1, threads_per_task-1
	1702	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
	1703	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
[87]	1704	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
	1705	sums_l(:,45:pr_palm,i)
	1706	IF ( max_pr_user > 0 ) THEN
	1707	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
	1708	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
	1709	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
	1710	ENDIF
[3298]	1711
	1712	IF ( air_chemistry ) THEN
	1713	IF ( max_pr_cs > 0 ) THEN
	1714	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+ max_pr_cs,0) = &
	1715	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,0) + &
	1716	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,i)
	1717
	1718	ENDIF
	1719	ENDIF
[4131]	1720	IF ( salsa ) THEN
	1721	IF ( max_pr_cs > 0 ) THEN
	1722	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) = &
	1723	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) + &
	1724	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,i)
	1725
	1726	ENDIF
	1727	ENDIF
[1]	1728	ENDDO
	1729	ENDIF
	1730
	1731	#if defined( __parallel )
[667]	1732
[1]	1733	!
	1734	!-- Compute total sum from local sums
[622]	1735	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1365]	1736	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
[1]	1737	MPI_SUM, comm2d, ierr )
[1365]	1738	IF ( large_scale_forcing ) THEN
	1739	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
	1740	MPI_REAL, MPI_SUM, comm2d, ierr )
	1741	ENDIF
[3298]	1742
[3458]	1743	IF ( air_chemistry .AND. max_pr_cs > 0 ) THEN
[3298]	1744	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[3458]	1745	DO i = 1, max_pr_cs
	1746	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+i,0), &
	1747	sums(nzb,pr_palm+max_pr_user+i), &
	1748	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
	1749	ENDDO
[3298]	1750	ENDIF
	1751
[4131]	1752	IF ( salsa .AND. max_pr_salsa > 0 ) THEN
	1753	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
	1754	DO i = 1, max_pr_salsa
	1755	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+max_pr_cs+i,0), &
	1756	sums(nzb,pr_palm+max_pr_user+max_pr_user+i), &
	1757	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
	1758	ENDDO
	1759	ENDIF
	1760
[1]	1761	#else
	1762	sums = sums_l(:,:,0)
[1365]	1763	IF ( large_scale_forcing ) THEN
	1764	sums(:,81:88) = sums_ls_l
	1765	ENDIF
[1]	1766	#endif
	1767
	1768	!
	1769	!-- Final values are obtained by division by the total number of grid points
	1770	!-- used for summation. After that store profiles.
[1738]	1771	!-- Check, if statistical regions do contain at least one grid point at the
	1772	!-- respective k-level, otherwise division by zero will lead to undefined
	1773	!-- values, which may cause e.g. problems with NetCDF output
[1]	1774	!-- Profiles:
	1775	DO k = nzb, nzt+1
[1738]	1776	sums(k,3) = sums(k,3) / ngp_2dh(sr)
	1777	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
	1778	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
	1779	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
	1780	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
	1781	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
	1782	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
[2270]	1783	sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
	1784	sums(k,114) = sums(k,114) / ngp_2dh(sr)
	1785	sums(k,117) = sums(k,117) / ngp_2dh(sr)
[1738]	1786	IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
	1787	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
	1788	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
	1789	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
	1790	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
	1791	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
	1792	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
	1793	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
[2270]	1794	sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
	1795	sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
[3452]	1796	sums(k,123) = sums(k,123) * ngp_2dh_s_inner(k,sr) / ngp_2dh(sr)
[1738]	1797	ENDIF
[1]	1798	ENDDO
[667]	1799
[1]	1800	!-- u* and so on
[87]	1801	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
[1]	1802	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
	1803	!-- above the topography, they are being divided by ngp_2dh(sr)
[87]	1804	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
[1]	1805	ngp_2dh(sr)
[197]	1806	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
	1807	ngp_2dh(sr)
[1960]	1808	sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
	1809	ngp_2dh(sr)
[2773]	1810	sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
	1811	ngp_2dh(sr)
[1]	1812	!-- eges, e*
[87]	1813	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
[132]	1814	ngp_3d(sr)
[1]	1815	!-- Old and new divergence
[87]	1816	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
[1]	1817	ngp_3d_inner(sr)
	1818
[87]	1819	!-- User-defined profiles
	1820	IF ( max_pr_user > 0 ) THEN
	1821	DO k = nzb, nzt+1
	1822	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
	1823	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
[132]	1824	ngp_2dh_s_inner(k,sr)
[87]	1825	ENDDO
	1826	ENDIF
[1007]	1827
[3298]	1828	IF ( air_chemistry ) THEN
	1829	IF ( max_pr_cs > 0 ) THEN
	1830	DO k = nzb, nzt+1
	1831	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) = &
	1832	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) / &
	1833	ngp_2dh_s_inner(k,sr)
	1834	ENDDO
	1835	ENDIF
	1836	ENDIF
	1837
[4131]	1838	IF ( salsa ) THEN
	1839	IF ( max_pr_salsa > 0 ) THEN
	1840	DO k = nzb, nzt+1
	1841	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) = &
	1842	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) &
	1843	/ ngp_2dh_s_inner(k,sr)
	1844	ENDDO
	1845	ENDIF
	1846	ENDIF
	1847
[1]	1848	!
	1849	!-- Collect horizontal average in hom.
	1850	!-- Compute deduced averages (e.g. total heat flux)
	1851	hom(:,1,3,sr) = sums(:,3) ! w
	1852	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
	1853	hom(:,1,9,sr) = sums(:,9) ! km
	1854	hom(:,1,10,sr) = sums(:,10) ! kh
	1855	hom(:,1,11,sr) = sums(:,11) ! l
	1856	hom(:,1,12,sr) = sums(:,12) ! w"u"
	1857	hom(:,1,13,sr) = sums(:,13) ! wu
	1858	hom(:,1,14,sr) = sums(:,14) ! w"v"
	1859	hom(:,1,15,sr) = sums(:,15) ! wv
	1860	hom(:,1,16,sr) = sums(:,16) ! w"pt"
	1861	hom(:,1,17,sr) = sums(:,17) ! wpt
	1862	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
	1863	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
	1864	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
	1865	hom(:,1,21,sr) = sums(:,21) ! wptBC
	1866	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
[96]	1867	! profile 24 is initial profile (sa)
	1868	! profiles 25-29 left empty for initial
[1]	1869	! profiles
	1870	hom(:,1,30,sr) = sums(:,30) ! u*2
	1871	hom(:,1,31,sr) = sums(:,31) ! v*2
	1872	hom(:,1,32,sr) = sums(:,32) ! w*2
	1873	hom(:,1,33,sr) = sums(:,33) ! pt*2
	1874	hom(:,1,34,sr) = sums(:,34) ! e*
	1875	hom(:,1,35,sr) = sums(:,35) ! w2pt
	1876	hom(:,1,36,sr) = sums(:,36) ! wpt2
	1877	hom(:,1,37,sr) = sums(:,37) ! we
	1878	hom(:,1,38,sr) = sums(:,38) ! w*3
[1353]	1879	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
[1]	1880	hom(:,1,40,sr) = sums(:,40) ! p
[531]	1881	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
[1]	1882	hom(:,1,46,sr) = sums(:,46) ! wvpt
	1883	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
	1884	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
	1885	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
	1886	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
	1887	hom(:,1,51,sr) = sums(:,51) ! w"qv"
	1888	hom(:,1,52,sr) = sums(:,52) ! wqv
	1889	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
	1890	hom(:,1,54,sr) = sums(:,54) ! ql
	1891	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
	1892	hom(:,1,56,sr) = sums(:,56) ! wp/dz
[2031]	1893	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
[1]	1894	hom(:,1,58,sr) = sums(:,58) ! u"pt"
	1895	hom(:,1,59,sr) = sums(:,59) ! upt
	1896	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
	1897	hom(:,1,61,sr) = sums(:,61) ! v"pt"
	1898	hom(:,1,62,sr) = sums(:,62) ! vpt
	1899	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
[2031]	1900	hom(:,1,64,sr) = sums(:,64) ! rho_ocean
[96]	1901	hom(:,1,65,sr) = sums(:,65) ! w"sa"
	1902	hom(:,1,66,sr) = sums(:,66) ! wsa
	1903	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
[106]	1904	hom(:,1,68,sr) = sums(:,68) ! wp
[2031]	1905	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
[197]	1906	hom(:,1,70,sr) = sums(:,70) ! q*2
[388]	1907	hom(:,1,71,sr) = sums(:,71) ! prho
[2252]	1908	hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
[2292]	1909	hom(:,1,123,sr) = sums(:,123) ! nc
[1053]	1910	hom(:,1,73,sr) = sums(:,73) ! nr
	1911	hom(:,1,74,sr) = sums(:,74) ! qr
	1912	hom(:,1,75,sr) = sums(:,75) ! qc
	1913	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
[1179]	1914	! 77 is initial density profile
[1241]	1915	hom(:,1,78,sr) = ug ! ug
	1916	hom(:,1,79,sr) = vg ! vg
[1299]	1917	hom(:,1,80,sr) = w_subs ! w_subs
[1]	1918
[1365]	1919	IF ( large_scale_forcing ) THEN
[1382]	1920	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
	1921	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
[1365]	1922	IF ( use_subsidence_tendencies ) THEN
[1382]	1923	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
	1924	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
[1365]	1925	ELSE
[1382]	1926	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
	1927	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
[1365]	1928	ENDIF
[1382]	1929	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
	1930	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
	1931	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
	1932	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
[1365]	1933	ENDIF
	1934
[1551]	1935	IF ( land_surface ) THEN
	1936	hom(:,1,89,sr) = sums(:,89) ! t_soil
	1937	! 90 is initial t_soil profile
	1938	hom(:,1,91,sr) = sums(:,91) ! m_soil
	1939	! 92 is initial m_soil profile
[2270]	1940	hom(:,1,93,sr) = sums(:,93) ! ghf
	1941	hom(:,1,94,sr) = sums(:,94) ! qsws_liq
	1942	hom(:,1,95,sr) = sums(:,95) ! qsws_soil
	1943	hom(:,1,96,sr) = sums(:,96) ! qsws_veg
	1944	hom(:,1,97,sr) = sums(:,97) ! r_a
	1945	hom(:,1,98,sr) = sums(:,98) ! r_s
[1555]	1946
[1551]	1947	ENDIF
	1948
	1949	IF ( radiation ) THEN
[2270]	1950	hom(:,1,99,sr) = sums(:,99) ! rad_net
	1951	hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
	1952	hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
	1953	hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
	1954	hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
[1585]	1955
[1691]	1956	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	1957	hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
	1958	hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
	1959	hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
	1960	hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
[1691]	1961
[2270]	1962	hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
	1963	hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
	1964	hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
	1965	hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
[1585]	1966	ENDIF
[1551]	1967	ENDIF
	1968
[2270]	1969	hom(:,1,112,sr) = sums(:,112) !: L
[1691]	1970
[1960]	1971	IF ( passive_scalar ) THEN
[2270]	1972	hom(:,1,117,sr) = sums(:,117) ! w"s"
	1973	hom(:,1,114,sr) = sums(:,114) ! ws
	1974	hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
	1975	hom(:,1,116,sr) = sums(:,116) ! s*2
[1960]	1976	ENDIF
	1977
[2270]	1978	hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
	1979	hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
[2037]	1980
[667]	1981	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
[1]	1982	! u, w'u', w'v', t (in last profile)
	1983
[87]	1984	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
	1985	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
	1986	sums(:,pr_palm+1:pr_palm+max_pr_user)
	1987	ENDIF
	1988
[3298]	1989	IF ( air_chemistry ) THEN
	1990	IF ( max_pr_cs > 0 ) THEN ! chem_spcs profiles
	1991	hom(:, 1, pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs, sr) = &
	1992	sums(:, pr_palm+max_pr_user+1:pr_palm+max_pr_user+max_pr_cs)
	1993	ENDIF
	1994	ENDIF
[4131]	1995
	1996	IF ( salsa ) THEN
	1997	IF ( max_pr_salsa > 0 ) THEN ! salsa profiles
	1998	hom(:,1,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa, sr) = &
	1999	sums(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa)
	2000	ENDIF
	2001	ENDIF
[1]	2002	!
	2003	!-- Determine the boundary layer height using two different schemes.
[94]	2004	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
	2005	!-- first relative minimum (maximum) of the total heat flux.
	2006	!-- The corresponding height is assumed as the boundary layer height, if it
	2007	!-- is less than 1.5 times the height where the heat flux becomes negative
[3004]	2008	!-- (positive) for the first time. Attention: the resolved vertical sensible
	2009	!-- heat flux (hom(:,1,17,sr) = wpt) is not known at the beginning because
	2010	!-- the calculation happens in advec_s_ws which is called after
	2011	!-- flow_statistics. Therefore z_i is directly taken from restart data at
	2012	!-- the beginning of restart runs.
[3003]	2013	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .OR. &
	2014	simulated_time_at_begin /= simulated_time ) THEN
[667]	2015
[3003]	2016	z_i(1) = 0.0_wp
	2017	first = .TRUE.
	2018
[3294]	2019	IF ( ocean_mode ) THEN
[3003]	2020	DO k = nzt, nzb+1, -1
	2021	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2022	first = .FALSE.
	2023	height = zw(k)
[97]	2024	ENDIF
[3003]	2025	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2026	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2027	IF ( zw(k) < 1.5_wp * height ) THEN
	2028	z_i(1) = zw(k)
	2029	ELSE
	2030	z_i(1) = height
	2031	ENDIF
	2032	EXIT
[94]	2033	ENDIF
[3003]	2034	ENDDO
	2035	ELSE
	2036	DO k = nzb, nzt-1
	2037	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2038	first = .FALSE.
	2039	height = zw(k)
	2040	ENDIF
	2041	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2042	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2043	IF ( zw(k) < 1.5_wp * height ) THEN
	2044	z_i(1) = zw(k)
	2045	ELSE
	2046	z_i(1) = height
	2047	ENDIF
	2048	EXIT
	2049	ENDIF
	2050	ENDDO
	2051	ENDIF
[1]	2052
	2053	!
[3003]	2054	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
	2055	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
	2056	!-- maximal local temperature gradient: starting from the second (the
	2057	!-- last but one) vertical gridpoint, the local gradient must be at least
	2058	!-- 0.2K/100m and greater than the next four gradients.
	2059	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
	2060	!-- ocean case!
	2061	z_i(2) = 0.0_wp
	2062	DO k = nzb+1, nzt+1
	2063	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
	2064	ENDDO
	2065	dptdz_threshold = 0.2_wp / 100.0_wp
[291]	2066
[3294]	2067	IF ( ocean_mode ) THEN
[3003]	2068	DO k = nzt+1, nzb+5, -1
	2069	IF ( dptdz(k) > dptdz_threshold .AND. &
	2070	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND.&
	2071	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
	2072	z_i(2) = zw(k-1)
	2073	EXIT
	2074	ENDIF
	2075	ENDDO
	2076	ELSE
	2077	DO k = nzb+1, nzt-3
	2078	IF ( dptdz(k) > dptdz_threshold .AND. &
	2079	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND.&
	2080	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
	2081	z_i(2) = zw(k-1)
	2082	EXIT
	2083	ENDIF
	2084	ENDDO
	2085	ENDIF
	2086
[97]	2087	ENDIF
[1]	2088
[87]	2089	hom(nzb+6,1,pr_palm,sr) = z_i(1)
	2090	hom(nzb+7,1,pr_palm,sr) = z_i(2)
[1]	2091
	2092	!
[1738]	2093	!-- Determine vertical index which is nearest to the mean surface level
	2094	!-- height of the respective statistic region
	2095	DO k = nzb, nzt
	2096	IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
	2097	k_surface_level = k
	2098	EXIT
	2099	ENDIF
	2100	ENDDO
[3003]	2101
[1738]	2102	!
[1]	2103	!-- Computation of both the characteristic vertical velocity and
	2104	!-- the characteristic convective boundary layer temperature.
[1738]	2105	!-- The inversion height entering into the equation is defined with respect
	2106	!-- to the mean surface level height of the respective statistic region.
	2107	!-- The horizontal average at surface level index + 1 is input for the
	2108	!-- average temperature.
	2109	IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
	2110	THEN
[2252]	2111	hom(nzb+8,1,pr_palm,sr) = &
[2037]	2112	( g / hom(k_surface_level+1,1,4,sr) * &
[2252]	2113	( hom(k_surface_level,1,18,sr) / &
	2114	( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
[1738]	2115	* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
[1]	2116	ELSE
[1353]	2117	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
[1]	2118	ENDIF
	2119
[48]	2120	!
[2968]	2121	!-- Collect the time series quantities. Please note, timeseries quantities
	2122	!-- which are collected from horizontally averaged profiles, e.g. wpt
	2123	!-- or pt(zp), are treated specially. In case of elevated model surfaces,
	2124	!-- index nzb+1 might be within topography and data will be zero. Therefore,
	2125	!-- take value for the first atmosphere index, which is topo_min_level+1.
	2126	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
	2127	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
[48]	2128	ts_value(3,sr) = dt_3d
[2968]	2129	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
	2130	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
[48]	2131	ts_value(6,sr) = u_max
	2132	ts_value(7,sr) = v_max
	2133	ts_value(8,sr) = w_max
[2968]	2134	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
	2135	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
	2136	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
	2137	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
	2138	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
	2139	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
	2140	ts_value(15,sr) = hom(topo_min_level+1,1,16,sr) ! w'pt' at k=1
	2141	ts_value(16,sr) = hom(topo_min_level+1,1,18,sr) ! wpt at k=1
	2142	ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
	2143	ts_value(18,sr) = hom(topo_min_level+1,1,4,sr) ! pt(zp)
	2144	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
	2145	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
	2146	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
[1709]	2147
	2148	IF ( .NOT. neutral ) THEN
[2270]	2149	ts_value(22,sr) = hom(nzb,1,112,sr) ! L
[48]	2150	ELSE
[1709]	2151	ts_value(22,sr) = 1.0E10_wp
[48]	2152	ENDIF
[1]	2153
[343]	2154	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
[1551]	2155
[1960]	2156	IF ( passive_scalar ) THEN
[2270]	2157	ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
[1960]	2158	ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
	2159	ENDIF
	2160
[1]	2161	!
[1551]	2162	!-- Collect land surface model timeseries
	2163	IF ( land_surface ) THEN
[2270]	2164	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
	2165	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
	2166	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
	2167	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
	2168	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
	2169	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
[1551]	2170	ENDIF
	2171	!
	2172	!-- Collect radiation model timeseries
	2173	IF ( radiation ) THEN
[2270]	2174	ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
	2175	ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
	2176	ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
	2177	ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
	2178	ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
[1585]	2179
	2180	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	2181	ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
	2182	ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
	2183	ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
	2184	ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
[1585]	2185	ENDIF
	2186
[1551]	2187	ENDIF
	2188
	2189	!
[3637]	2190	!-- Calculate additional statistics provided by other modules
	2191	CALL module_interface_statistics( 'time_series', sr, 0, dots_max )
[2817]	2192
[48]	2193	ENDDO ! loop of the subregions
	2194
[1]	2195	!
[1918]	2196	!-- If required, sum up horizontal averages for subsequent time averaging.
	2197	!-- Do not sum, if flow statistics is called before the first initial time step.
	2198	IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
[1353]	2199	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
[1]	2200	hom_sum = hom_sum + hom(:,1,:,:)
	2201	average_count_pr = average_count_pr + 1
	2202	do_sum = .FALSE.
	2203	ENDIF
	2204
	2205	!
	2206	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
	2207	!-- This flag is reset after each time step in time_integration.
	2208	flow_statistics_called = .TRUE.
	2209
	2210	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
	2211
	2212
	2213	END SUBROUTINE flow_statistics

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |