Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 4356

Last change on this file since 4356 was 4346, checked in by motisi, 5 years ago
Introduction of wall_flags_total_0, which currently sets bits based on static topography information used in wall_flags_static_0
Property svn:keywords set to `Id`
File size: 106.2 KB

Rev	Line
[1682]	1	!> @file flow_statistics.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[3651]	17	! Copyright 1997-2019 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[3298]	21	! ------------------
[1961]	22	!
[3042]	23	!
[1739]	24	! Former revisions:
	25	! -----------------
	26	! $Id: flow_statistics.f90 4346 2019-12-18 11:55:56Z suehring $
[4346]	27	! Introduction of wall_flags_total_0, which currently sets bits based on static
	28	! topography information used in wall_flags_static_0
	29	!
	30	! 4329 2019-12-10 15:46:36Z motisi
[4329]	31	! Renamed wall_flags_0 to wall_flags_static_0
	32	!
	33	! 4182 2019-08-22 15:20:23Z scharf
[4182]	34	! Corrected "Former revisions" section
	35	!
	36	! 4131 2019-08-02 11:06:18Z monakurppa
[4131]	37	! Allow profile output for salsa variables.
	38	!
	39	! 4039 2019-06-18 10:32:41Z suehring
[4039]	40	! Correct conversion to kinematic scalar fluxes in case of pw-scheme and
	41	! statistic regions
	42	!
	43	! 3828 2019-03-27 19:36:23Z raasch
[3828]	44	! unused variables removed
	45	!
	46	! 3676 2019-01-16 15:07:05Z knoop
[3651]	47	! Bugfix, terminate OMP Parallel block
[3298]	48	!
[4182]	49	! Revision 1.1 1997/08/11 06:15:17 raasch
	50	! Initial revision
	51	!
	52	!
[1]	53	! Description:
	54	! ------------
[1682]	55	!> Compute average profiles and further average flow quantities for the different
	56	!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
	57	!>
	58	!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
	59	!> lower vertical index for k-loops for all variables, although strictly
	60	!> speaking the k-loops would have to be split up according to the staggered
	61	!> grid. However, this implies no error since staggered velocity components
	62	!> are zero at the walls and inside buildings.
[1]	63	!------------------------------------------------------------------------------!
[1682]	64	SUBROUTINE flow_statistics
[1]	65
[3298]	66
[1320]	67	USE arrays_3d, &
[2037]	68	ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
[2292]	69	momentumflux_output_conversion, nc, nr, p, prho, prr, pt, q, &
[2232]	70	qc, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
[3274]	71	sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, &
	72	zw, d_exner
[3298]	73
[3274]	74	USE basic_constants_and_equations_mod, &
[3298]	75	ONLY: g, lv_d_cp
	76
[3637]	77	USE bulk_cloud_model_mod, &
	78	ONLY: bulk_cloud_model, microphysics_morrison, microphysics_seifert
[3298]	79
	80	USE chem_modules, &
	81	ONLY: max_pr_cs
	82
[1320]	83	USE control_parameters, &
[3298]	84	ONLY: air_chemistry, average_count_pr, cloud_droplets, do_sum, &
[3274]	85	dt_3d, humidity, initializing_actions, land_surface, &
[3003]	86	large_scale_forcing, large_scale_subsidence, max_pr_user, &
[3294]	87	message_string, neutral, ocean_mode, passive_scalar, &
	88	simulated_time, simulated_time_at_begin, &
	89	use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
[4131]	90	ws_scheme_mom, ws_scheme_sca, salsa, max_pr_salsa
[3298]	91
[1320]	92	USE cpulog, &
[1551]	93	ONLY: cpu_log, log_point
[3298]	94
[1320]	95	USE grid_variables, &
[1551]	96	ONLY: ddx, ddy
[1320]	97
	98	USE indices, &
[1551]	99	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, ngp_sums, &
[2968]	100	ngp_sums_ls, nxl, nxr, nyn, nys, nzb, nzt, topo_min_level, &
[4346]	101	wall_flags_total_0
[1320]	102
	103	USE kinds
	104
[1551]	105	USE land_surface_model_mod, &
[2232]	106	ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
[1551]	107
[2320]	108	USE lsf_nudging_mod, &
	109	ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
	110
[3637]	111	USE module_interface, &
	112	ONLY: module_interface_statistics
	113
[1783]	114	USE netcdf_interface, &
[2817]	115	ONLY: dots_rad, dots_soil, dots_max
[1783]	116
[1]	117	USE pegrid
[1551]	118
	119	USE radiation_model_mod, &
[2696]	120	ONLY: radiation, radiation_scheme, &
[1691]	121	rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
	122	rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
[1585]	123
[1]	124	USE statistics
	125
[3828]	126	USE surface_mod, &
	127	ONLY : surf_def_h, surf_lsm_h, surf_usm_h
[1691]	128
[2232]	129
[1]	130	IMPLICIT NONE
	131
[1682]	132	INTEGER(iwp) :: i !<
	133	INTEGER(iwp) :: j !<
	134	INTEGER(iwp) :: k !<
[2232]	135	INTEGER(iwp) :: ki !<
[1738]	136	INTEGER(iwp) :: k_surface_level !<
[2232]	137	INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
	138	INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
[1682]	139	INTEGER(iwp) :: nt !<
[3241]	140	!$ INTEGER(iwp) :: omp_get_thread_num !<
[1682]	141	INTEGER(iwp) :: sr !<
	142	INTEGER(iwp) :: tn !<
[2232]	143
[1682]	144	LOGICAL :: first !<
[1320]	145
[1682]	146	REAL(wp) :: dptdz_threshold !<
	147	REAL(wp) :: fac !<
[2232]	148	REAL(wp) :: flag !<
[1682]	149	REAL(wp) :: height !<
	150	REAL(wp) :: pts !<
	151	REAL(wp) :: sums_l_etot !<
	152	REAL(wp) :: ust !<
	153	REAL(wp) :: ust2 !<
	154	REAL(wp) :: u2 !<
	155	REAL(wp) :: vst !<
	156	REAL(wp) :: vst2 !<
	157	REAL(wp) :: v2 !<
	158	REAL(wp) :: w2 !<
[1320]	159
[1682]	160	REAL(wp) :: dptdz(nzb+1:nzt+1) !<
	161	REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
[1]	162
	163	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
	164
[1221]	165
[1]	166	!
	167	!-- To be on the safe side, check whether flow_statistics has already been
	168	!-- called once after the current time step
	169	IF ( flow_statistics_called ) THEN
[254]	170
[274]	171	message_string = 'flow_statistics is called two times within one ' // &
	172	'timestep'
[254]	173	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
[1007]	174
[1]	175	ENDIF
	176
	177	!
	178	!-- Compute statistics for each (sub-)region
	179	DO sr = 0, statistic_regions
	180
	181	!
	182	!-- Initialize (local) summation array
[1353]	183	sums_l = 0.0_wp
[3658]	184	#ifdef _OPENACC
	185	!$ACC KERNELS PRESENT(sums_l)
	186	sums_l = 0.0_wp
	187	!$ACC END KERNELS
	188	#endif
[1]	189
	190	!
	191	!-- Store sums that have been computed in other subroutines in summation
	192	!-- array
	193	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
	194	!-- WARNING: next line still has to be adjusted for OpenMP
[2037]	195	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
	196	heatflux_output_conversion ! heat flux from advec_s_bc
[87]	197	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
	198	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
[1]	199
[667]	200	!
[1498]	201	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
	202	!-- scale) vertical fluxes and velocity variances by using commonly-
	203	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
	204	!-- in combination with the 5th order advection scheme, pronounced
	205	!-- artificial kinks could be observed in the vertical profiles near the
	206	!-- surface. Please note: these kinks were not related to the model truth,
	207	!-- i.e. these kinks are just related to an evaluation problem.
	208	!-- In order avoid these kinks, vertical fluxes and horizontal as well
	209	!-- vertical velocity variances are calculated directly within the advection
	210	!-- routines, according to the numerical discretization, to evaluate the
	211	!-- statistical quantities as they will appear within the prognostic
	212	!-- equations.
[667]	213	!-- Copy the turbulent quantities, evaluated in the advection routines to
[1498]	214	!-- the local array sums_l() for further computations.
[743]	215	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
[696]	216
[1007]	217	!
[673]	218	!-- According to the Neumann bc for the horizontal velocity components,
	219	!-- the corresponding fluxes has to satisfiy the same bc.
[3294]	220	IF ( ocean_mode ) THEN
[801]	221	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
[1007]	222	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
[673]	223	ENDIF
[696]	224
	225	DO i = 0, threads_per_task-1
[1007]	226	!
[696]	227	!-- Swap the turbulent quantities evaluated in advec_ws.
[2037]	228	sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
	229	* momentumflux_output_conversion ! wu
	230	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
	231	* momentumflux_output_conversion ! wv
[801]	232	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
	233	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
	234	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
[1353]	235	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
[1320]	236	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
[801]	237	sums_ws2_ws_l(:,i) ) ! e*
[667]	238	ENDDO
[696]	239
[667]	240	ENDIF
[696]	241
[1567]	242	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[696]	243
	244	DO i = 0, threads_per_task-1
[2037]	245	sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
	246	* heatflux_output_conversion ! wpt
[3294]	247	IF ( ocean_mode ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
[2037]	248	IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
	249	* waterflux_output_conversion ! wq
[2270]	250	IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! ws
[696]	251	ENDDO
	252
[667]	253	ENDIF
[305]	254	!
[1]	255	!-- Horizontally averaged profiles of horizontal velocities and temperature.
	256	!-- They must have been computed before, because they are already required
	257	!-- for other horizontal averages.
	258	tn = 0
[2232]	259	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	260	!$ tn = omp_get_thread_num()
[1]	261	!$OMP DO
[3658]	262	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag) &
[4346]	263	!$ACC PRESENT(wall_flags_total_0, u, v, pt, rmask, sums_l)
[1]	264	DO i = nxl, nxr
	265	DO j = nys, nyn
[2232]	266	DO k = nzb, nzt+1
[4346]	267	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[3658]	268	!$ACC ATOMIC
[2232]	269	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
	270	* flag
[3658]	271	!$ACC ATOMIC
[2232]	272	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
	273	* flag
[3658]	274	!$ACC ATOMIC
[2232]	275	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
	276	* flag
[1]	277	ENDDO
	278	ENDDO
	279	ENDDO
[3658]	280	!$ACC UPDATE HOST(sums_l(:,1,tn), sums_l(:,2,tn), sums_l(:,4,tn))
[1]	281
	282	!
[96]	283	!-- Horizontally averaged profile of salinity
[3294]	284	IF ( ocean_mode ) THEN
[96]	285	!$OMP DO
	286	DO i = nxl, nxr
	287	DO j = nys, nyn
[2232]	288	DO k = nzb, nzt+1
	289	sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
	290	* rmask(j,i,sr) &
	291	* MERGE( 1.0_wp, 0.0_wp, &
[4346]	292	BTEST( wall_flags_total_0(k,j,i), 22 ) )
[96]	293	ENDDO
	294	ENDDO
	295	ENDDO
	296	ENDIF
	297
	298	!
[1]	299	!-- Horizontally averaged profiles of virtual potential temperature,
[3040]	300	!-- total water content, water vapor mixing ratio and liquid water potential
[1]	301	!-- temperature
[75]	302	IF ( humidity ) THEN
[1]	303	!$OMP DO
	304	DO i = nxl, nxr
	305	DO j = nys, nyn
[2232]	306	DO k = nzb, nzt+1
[4346]	307	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	308	sums_l(k,44,tn) = sums_l(k,44,tn) + &
	309	vpt(k,j,i) * rmask(j,i,sr) * flag
	310	sums_l(k,41,tn) = sums_l(k,41,tn) + &
	311	q(k,j,i) * rmask(j,i,sr) * flag
[1]	312	ENDDO
	313	ENDDO
	314	ENDDO
[3274]	315	IF ( bulk_cloud_model ) THEN
[1]	316	!$OMP DO
	317	DO i = nxl, nxr
	318	DO j = nys, nyn
[2232]	319	DO k = nzb, nzt+1
[4346]	320	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	321	sums_l(k,42,tn) = sums_l(k,42,tn) + &
	322	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
	323	* flag
	324	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
[3274]	325	pt(k,j,i) + lv_d_cp * d_exner(k) * ql(k,j,i) &
[2232]	326	) * rmask(j,i,sr) &
	327	* flag
[1]	328	ENDDO
	329	ENDDO
	330	ENDDO
	331	ENDIF
	332	ENDIF
	333
	334	!
	335	!-- Horizontally averaged profiles of passive scalar
	336	IF ( passive_scalar ) THEN
	337	!$OMP DO
	338	DO i = nxl, nxr
	339	DO j = nys, nyn
[2232]	340	DO k = nzb, nzt+1
[2270]	341	sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
[2232]	342	* rmask(j,i,sr) &
	343	* MERGE( 1.0_wp, 0.0_wp, &
[4346]	344	BTEST( wall_flags_total_0(k,j,i), 22 ) )
[1]	345	ENDDO
	346	ENDDO
	347	ENDDO
	348	ENDIF
	349	!$OMP END PARALLEL
	350	!
	351	!-- Summation of thread sums
	352	IF ( threads_per_task > 1 ) THEN
	353	DO i = 1, threads_per_task-1
	354	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
	355	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
	356	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
[3294]	357	IF ( ocean_mode ) THEN
[96]	358	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
	359	ENDIF
[75]	360	IF ( humidity ) THEN
[1]	361	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
	362	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
[3274]	363	IF ( bulk_cloud_model ) THEN
[1]	364	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
	365	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
	366	ENDIF
	367	ENDIF
	368	IF ( passive_scalar ) THEN
[2270]	369	sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
[1]	370	ENDIF
	371	ENDDO
	372	ENDIF
	373
	374	#if defined( __parallel )
	375	!
	376	!-- Compute total sum from local sums
[622]	377	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	378	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
[1]	379	MPI_SUM, comm2d, ierr )
[622]	380	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	381	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
[1]	382	MPI_SUM, comm2d, ierr )
[622]	383	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	384	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
[1]	385	MPI_SUM, comm2d, ierr )
[3294]	386	IF ( ocean_mode ) THEN
[622]	387	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	388	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
[96]	389	MPI_REAL, MPI_SUM, comm2d, ierr )
	390	ENDIF
[75]	391	IF ( humidity ) THEN
[622]	392	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	393	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
[1]	394	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	395	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	396	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
[1]	397	MPI_REAL, MPI_SUM, comm2d, ierr )
[3274]	398	IF ( bulk_cloud_model ) THEN
[622]	399	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	400	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
[1]	401	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	402	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	403	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
[1]	404	MPI_REAL, MPI_SUM, comm2d, ierr )
	405	ENDIF
	406	ENDIF
	407
	408	IF ( passive_scalar ) THEN
[622]	409	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2270]	410	CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
[1]	411	MPI_REAL, MPI_SUM, comm2d, ierr )
	412	ENDIF
	413	#else
	414	sums(:,1) = sums_l(:,1,0)
	415	sums(:,2) = sums_l(:,2,0)
	416	sums(:,4) = sums_l(:,4,0)
[3294]	417	IF ( ocean_mode ) sums(:,23) = sums_l(:,23,0)
[75]	418	IF ( humidity ) THEN
[1]	419	sums(:,44) = sums_l(:,44,0)
	420	sums(:,41) = sums_l(:,41,0)
[3274]	421	IF ( bulk_cloud_model ) THEN
[1]	422	sums(:,42) = sums_l(:,42,0)
	423	sums(:,43) = sums_l(:,43,0)
	424	ENDIF
	425	ENDIF
[2270]	426	IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
[1]	427	#endif
	428
	429	!
	430	!-- Final values are obtained by division by the total number of grid points
	431	!-- used for summation. After that store profiles.
[132]	432	sums(:,1) = sums(:,1) / ngp_2dh(sr)
	433	sums(:,2) = sums(:,2) / ngp_2dh(sr)
	434	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
[1]	435	hom(:,1,1,sr) = sums(:,1) ! u
	436	hom(:,1,2,sr) = sums(:,2) ! v
	437	hom(:,1,4,sr) = sums(:,4) ! pt
[3658]	438	!$ACC UPDATE DEVICE(hom(:,1,1,sr), hom(:,1,2,sr), hom(:,1,4,sr))
[1]	439
[667]	440
[1]	441	!
[96]	442	!-- Salinity
[3294]	443	IF ( ocean_mode ) THEN
[132]	444	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
[96]	445	hom(:,1,23,sr) = sums(:,23) ! sa
	446	ENDIF
	447
	448	!
[1]	449	!-- Humidity and cloud parameters
[75]	450	IF ( humidity ) THEN
[132]	451	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
	452	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
[1]	453	hom(:,1,44,sr) = sums(:,44) ! vpt
	454	hom(:,1,41,sr) = sums(:,41) ! qv (q)
[3274]	455	IF ( bulk_cloud_model ) THEN
[132]	456	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
	457	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
[1]	458	hom(:,1,42,sr) = sums(:,42) ! qv
	459	hom(:,1,43,sr) = sums(:,43) ! pt
	460	ENDIF
	461	ENDIF
	462
	463	!
	464	!-- Passive scalar
[2270]	465	IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
[1960]	466	ngp_2dh_s_inner(:,sr) ! s
[1]	467
	468	!
	469	!-- Horizontally averaged profiles of the remaining prognostic variables,
	470	!-- variances, the total and the perturbation energy (single values in last
	471	!-- column of sums_l) and some diagnostic quantities.
[132]	472	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	473	!-- ---- speaking the following k-loop would have to be split up and
	474	!-- rearranged according to the staggered grid.
[132]	475	!-- However, this implies no error since staggered velocity components
	476	!-- are zero at the walls and inside buildings.
[1]	477	tn = 0
[3241]	478	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, &
[1815]	479	!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
[2232]	480	!$OMP w2, flag, m, ki, l )
	481	!$ tn = omp_get_thread_num()
[1]	482	!$OMP DO
[3658]	483	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, m) &
	484	!$ACC PRIVATE(sums_l_etot, flag) &
[4346]	485	!$ACC PRESENT(wall_flags_total_0, rmask, momentumflux_output_conversion) &
[3658]	486	!$ACC PRESENT(hom(:,1,4,sr)) &
	487	!$ACC PRESENT(e, u, v, w, km, kh, p, pt) &
	488	!$ACC PRESENT(surf_def_h(0), surf_lsm_h, surf_usm_h) &
	489	!$ACC PRESENT(sums_l)
[1]	490	DO i = nxl, nxr
	491	DO j = nys, nyn
[1353]	492	sums_l_etot = 0.0_wp
[2232]	493	DO k = nzb, nzt+1
[4346]	494	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[1]	495	!
	496	!-- Prognostic and diagnostic variables
[3658]	497	!$ACC ATOMIC
[2232]	498	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
	499	* flag
[3658]	500	!$ACC ATOMIC
[2232]	501	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
	502	* flag
[3658]	503	!$ACC ATOMIC
[2232]	504	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
	505	* flag
[3658]	506	!$ACC ATOMIC
[2232]	507	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
	508	* flag
[3658]	509	!$ACC ATOMIC
[2252]	510	sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
	511	/ momentumflux_output_conversion(k) ) &
	512	* flag
[1]	513
[3658]	514	!$ACC ATOMIC
[1]	515	sums_l(k,33,tn) = sums_l(k,33,tn) + &
[2232]	516	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)&
	517	* flag
[3658]	518	#ifndef _OPENACC
[624]	519	IF ( humidity ) THEN
	520	sums_l(k,70,tn) = sums_l(k,70,tn) + &
[2232]	521	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)&
	522	* flag
[624]	523	ENDIF
[1960]	524	IF ( passive_scalar ) THEN
[2270]	525	sums_l(k,116,tn) = sums_l(k,116,tn) + &
	526	( s(k,j,i)-hom(k,1,115,sr) )*2 rmask(j,i,sr)&
[2232]	527	* flag
[1960]	528	ENDIF
[3658]	529	#endif
[699]	530	!
	531	!-- Higher moments
	532	!-- (Computation of the skewness of w further below)
[3658]	533	!$ACC ATOMIC
[2232]	534	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr) &
	535	* flag
[667]	536
[1]	537	sums_l_etot = sums_l_etot + &
[2232]	538	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
	539	w(k,j,i)*2 ) rmask(j,i,sr)&
	540	* flag
[1]	541	ENDDO
	542	!
	543	!-- Total and perturbation energy for the total domain (being
	544	!-- collected in the last column of sums_l). Summation of these
	545	!-- quantities is seperated from the previous loop in order to
	546	!-- allow vectorization of that loop.
[3658]	547	!$ACC ATOMIC
[87]	548	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
[1]	549	!
	550	!-- 2D-arrays (being collected in the last column of sums_l)
[2773]	551	IF ( surf_def_h(0)%end_index(j,i) >= &
[2696]	552	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	553	m = surf_def_h(0)%start_index(j,i)
[3658]	554	!$ACC ATOMIC
[2773]	555	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	556	surf_def_h(0)%us(m) * rmask(j,i,sr)
[3658]	557	!$ACC ATOMIC
[2773]	558	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	559	surf_def_h(0)%usws(m) * rmask(j,i,sr)
[3658]	560	!$ACC ATOMIC
[2773]	561	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	562	surf_def_h(0)%vsws(m) * rmask(j,i,sr)
[3658]	563	!$ACC ATOMIC
[2773]	564	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	565	surf_def_h(0)%ts(m) * rmask(j,i,sr)
[3658]	566	#ifndef _OPENACC
[2232]	567	IF ( humidity ) THEN
[2773]	568	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	569	surf_def_h(0)%qs(m) * rmask(j,i,sr)
	570	ENDIF
	571	IF ( passive_scalar ) THEN
[2773]	572	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	573	surf_def_h(0)%ss(m) * rmask(j,i,sr)
	574	ENDIF
[3658]	575	#endif
[2773]	576	!
	577	!-- Summation of surface temperature.
[3658]	578	!$ACC ATOMIC
[2773]	579	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	580	surf_def_h(0)%pt_surface(m) * &
	581	rmask(j,i,sr)
[197]	582	ENDIF
[2696]	583	IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
[2232]	584	m = surf_lsm_h%start_index(j,i)
[3658]	585	!$ACC ATOMIC
[2773]	586	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	587	surf_lsm_h%us(m) * rmask(j,i,sr)
[3658]	588	!$ACC ATOMIC
[2773]	589	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	590	surf_lsm_h%usws(m) * rmask(j,i,sr)
[3658]	591	!$ACC ATOMIC
[2773]	592	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	593	surf_lsm_h%vsws(m) * rmask(j,i,sr)
[3658]	594	!$ACC ATOMIC
[2773]	595	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	596	surf_lsm_h%ts(m) * rmask(j,i,sr)
[3658]	597	#ifndef _OPENACC
[2232]	598	IF ( humidity ) THEN
[2773]	599	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	600	surf_lsm_h%qs(m) * rmask(j,i,sr)
	601	ENDIF
	602	IF ( passive_scalar ) THEN
[2773]	603	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	604	surf_lsm_h%ss(m) * rmask(j,i,sr)
	605	ENDIF
[3658]	606	#endif
[2773]	607	!
	608	!-- Summation of surface temperature.
[3658]	609	!$ACC ATOMIC
[2773]	610	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	611	surf_lsm_h%pt_surface(m) * &
	612	rmask(j,i,sr)
[1960]	613	ENDIF
[2696]	614	IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
	615	m = surf_usm_h%start_index(j,i)
[3658]	616	!$ACC ATOMIC
[2773]	617	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	618	surf_usm_h%us(m) * rmask(j,i,sr)
[3658]	619	!$ACC ATOMIC
[2773]	620	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	621	surf_usm_h%usws(m) * rmask(j,i,sr)
[3658]	622	!$ACC ATOMIC
[2773]	623	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	624	surf_usm_h%vsws(m) * rmask(j,i,sr)
[3658]	625	!$ACC ATOMIC
[2773]	626	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	627	surf_usm_h%ts(m) * rmask(j,i,sr)
[3658]	628	#ifndef _OPENACC
[2232]	629	IF ( humidity ) THEN
[2773]	630	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	631	surf_usm_h%qs(m) * rmask(j,i,sr)
	632	ENDIF
	633	IF ( passive_scalar ) THEN
[2773]	634	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	635	surf_usm_h%ss(m) * rmask(j,i,sr)
	636	ENDIF
[3658]	637	#endif
[2773]	638	!
	639	!-- Summation of surface temperature.
[3658]	640	!$ACC ATOMIC
[2773]	641	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	642	surf_usm_h%pt_surface(m) * &
	643	rmask(j,i,sr)
[2232]	644	ENDIF
[1]	645	ENDDO
	646	ENDDO
[3658]	647	!$ACC UPDATE &
	648	!$ACC HOST(sums_l(:,3,tn), sums_l(:,8,tn), sums_l(:,9,tn)) &
	649	!$ACC HOST(sums_l(:,10,tn), sums_l(:,40,tn), sums_l(:,33,tn)) &
	650	!$ACC HOST(sums_l(:,38,tn)) &
	651	!$ACC HOST(sums_l(nzb:nzb+4,pr_palm,tn), sums_l(nzb+14:nzb+14,pr_palm,tn))
[1]	652
	653	!
[667]	654	!-- Computation of statistics when ws-scheme is not used. Else these
	655	!-- quantities are evaluated in the advection routines.
[1918]	656	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
	657	THEN
[667]	658	!$OMP DO
	659	DO i = nxl, nxr
	660	DO j = nys, nyn
[2232]	661	DO k = nzb, nzt+1
[4346]	662	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	663
[667]	664	u2 = u(k,j,i)**2
	665	v2 = v(k,j,i)**2
	666	w2 = w(k,j,i)**2
	667	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	668	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	669
[2232]	670	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
	671	* flag
	672	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
	673	* flag
	674	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
	675	* flag
[667]	676	!
[2026]	677	!-- Perturbation energy
[667]	678
[1353]	679	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
[2232]	680	( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
	681	* flag
[667]	682	ENDDO
	683	ENDDO
	684	ENDDO
	685	ENDIF
[2026]	686	!
	687	!-- Computaion of domain-averaged perturbation energy. Please note,
	688	!-- to prevent that perturbation energy is larger (even if only slightly)
	689	!-- than the total kinetic energy, calculation is based on deviations from
	690	!-- the horizontal mean, instead of spatial descretization of the advection
	691	!-- term.
	692	!$OMP DO
[3658]	693	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag, w2, ust2, vst2) &
[4346]	694	!$ACC PRESENT(wall_flags_total_0, u, v, w, rmask, hom(:,1,1:2,sr)) &
[3658]	695	!$ACC PRESENT(sums_l)
[2026]	696	DO i = nxl, nxr
	697	DO j = nys, nyn
[2232]	698	DO k = nzb, nzt+1
[4346]	699	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[2232]	700
[2026]	701	w2 = w(k,j,i)**2
	702	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	703	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	704	w2 = w(k,j,i)**2
[1241]	705
[3658]	706	!$ACC ATOMIC
[2026]	707	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
[2232]	708	+ 0.5_wp * ( ust2 + vst2 + w2 ) &
	709	* rmask(j,i,sr) &
	710	* flag
[2026]	711	ENDDO
	712	ENDDO
	713	ENDDO
[3658]	714	!$ACC UPDATE HOST(sums_l(nzb+5:nzb+5,pr_palm,tn))
[2026]	715
[667]	716	!
[1]	717	!-- Horizontally averaged profiles of the vertical fluxes
[667]	718
[1]	719	!$OMP DO
[3658]	720	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, l, m) &
	721	!$ACC PRIVATE(ki, flag, ust, vst, pts) &
	722	!$ACC PRESENT(kh, km, u, v, w, pt) &
[4346]	723	!$ACC PRESENT(wall_flags_total_0, rmask, ddzu, rho_air_zw, hom(:,1,1:4,sr)) &
[3658]	724	!$ACC PRESENT(heatflux_output_conversion, momentumflux_output_conversion) &
	725	!$ACC PRESENT(surf_def_h(0:2), surf_lsm_h, surf_usm_h) &
	726	!$ACC PRESENT(sums_l)
[1]	727	DO i = nxl, nxr
	728	DO j = nys, nyn
	729	!
	730	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
	731	!-- oterwise from k=nzb+1)
[132]	732	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
[1]	733	!-- ---- strictly speaking the following k-loop would have to be
	734	!-- split up according to the staggered grid.
[132]	735	!-- However, this implies no error since staggered velocity
	736	!-- components are zero at the walls and inside buildings.
[2232]	737	!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
	738	!-- which are added further below.
	739	DO k = nzb, nzt
	740	flag = MERGE( 1.0_wp, 0.0_wp, &
[4346]	741	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
[2232]	742	MERGE( 1.0_wp, 0.0_wp, &
[4346]	743	BTEST( wall_flags_total_0(k,j,i), 9 ) )
[1]	744	!
	745	!-- Momentum flux w"u"
[3658]	746	!$ACC ATOMIC
[1353]	747	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
[1]	748	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
	749	) * ( &
	750	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
	751	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
[2037]	752	) * rmask(j,i,sr) &
	753	* rho_air_zw(k) &
[2232]	754	* momentumflux_output_conversion(k) &
	755	* flag
[1]	756	!
	757	!-- Momentum flux w"v"
[3658]	758	!$ACC ATOMIC
[1353]	759	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
[1]	760	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
	761	) * ( &
	762	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
	763	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
[2037]	764	) * rmask(j,i,sr) &
	765	* rho_air_zw(k) &
[2232]	766	* momentumflux_output_conversion(k) &
	767	* flag
[1]	768	!
	769	!-- Heat flux w"pt"
[3658]	770	!$ACC ATOMIC
[1]	771	sums_l(k,16,tn) = sums_l(k,16,tn) &
[1353]	772	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	773	* ( pt(k+1,j,i) - pt(k,j,i) ) &
[2037]	774	* rho_air_zw(k) &
	775	* heatflux_output_conversion(k) &
[2232]	776	* ddzu(k+1) * rmask(j,i,sr) &
	777	* flag
[1]	778
	779	!
[96]	780	!-- Salinity flux w"sa"
[3658]	781	#ifndef _OPENACC
[3294]	782	IF ( ocean_mode ) THEN
[96]	783	sums_l(k,65,tn) = sums_l(k,65,tn) &
[1353]	784	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[96]	785	* ( sa(k+1,j,i) - sa(k,j,i) ) &
[2232]	786	* ddzu(k+1) * rmask(j,i,sr) &
	787	* flag
[96]	788	ENDIF
	789
	790	!
[1]	791	!-- Buoyancy flux, water flux (humidity flux) w"q"
[75]	792	IF ( humidity ) THEN
[1]	793	sums_l(k,45,tn) = sums_l(k,45,tn) &
[1353]	794	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	795	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
[2037]	796	* rho_air_zw(k) &
	797	* heatflux_output_conversion(k) &
[2232]	798	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	799	sums_l(k,48,tn) = sums_l(k,48,tn) &
[1353]	800	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	801	* ( q(k+1,j,i) - q(k,j,i) ) &
[2037]	802	* rho_air_zw(k) &
	803	* waterflux_output_conversion(k)&
[2232]	804	* ddzu(k+1) * rmask(j,i,sr) * flag
[1007]	805
[3274]	806	IF ( bulk_cloud_model ) THEN
[1]	807	sums_l(k,51,tn) = sums_l(k,51,tn) &
[1353]	808	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	809	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
	810	- ( q(k,j,i) - ql(k,j,i) ) ) &
[2037]	811	* rho_air_zw(k) &
	812	* waterflux_output_conversion(k)&
[2232]	813	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	814	ENDIF
	815	ENDIF
	816
	817	!
	818	!-- Passive scalar flux
	819	IF ( passive_scalar ) THEN
[2270]	820	sums_l(k,117,tn) = sums_l(k,117,tn) &
[1353]	821	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[2026]	822	* ( s(k+1,j,i) - s(k,j,i) ) &
[2232]	823	* ddzu(k+1) * rmask(j,i,sr) &
	824	* flag
[1]	825	ENDIF
[3658]	826	#endif
[1]	827
	828	ENDDO
	829
	830	!
	831	!-- Subgridscale fluxes in the Prandtl layer
	832	IF ( use_surface_fluxes ) THEN
[2232]	833	DO l = 0, 1
[3658]	834	! The original code using MERGE doesn't work with the PGI
	835	! compiler when running on the GPU.
[3676]	836	! This is submitted as a compiler Bug in PGI ticket TPR#26718
[3658]	837	! ki = MERGE( -1, 0, l == 0 )
	838	ki = -1 + l
[2232]	839	IF ( surf_def_h(l)%ns >= 1 ) THEN
[2696]	840	DO m = surf_def_h(l)%start_index(j,i), &
	841	surf_def_h(l)%end_index(j,i)
[2232]	842	k = surf_def_h(l)%k(m)
	843
[3658]	844	!$ACC ATOMIC
[2232]	845	sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
	846	momentumflux_output_conversion(k+ki) * &
	847	surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	848	!$ACC ATOMIC
[2232]	849	sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
	850	momentumflux_output_conversion(k+ki) * &
	851	surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	852	!$ACC ATOMIC
[2232]	853	sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
	854	heatflux_output_conversion(k+ki) * &
	855	surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	856	#if 0
[2232]	857	sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
	858	0.0_wp * rmask(j,i,sr) ! u"pt"
	859	sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
	860	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	861	#endif
	862	#ifndef _OPENACC
[3294]	863	IF ( ocean_mode ) THEN
[2232]	864	sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
	865	surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
	866	ENDIF
	867	IF ( humidity ) THEN
	868	sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
	869	waterflux_output_conversion(k+ki) * &
	870	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	871	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	872	( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
	873	surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
	874	surf_def_h(l)%qsws(m) ) &
	875	* heatflux_output_conversion(k+ki)
	876	IF ( cloud_droplets ) THEN
	877	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	878	( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
	879	ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
	880	0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
	881	* heatflux_output_conversion(k+ki)
	882	ENDIF
[3274]	883	IF ( bulk_cloud_model ) THEN
[2232]	884	!
	885	!-- Formula does not work if ql(k+ki) /= 0.0
	886	sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
	887	waterflux_output_conversion(k+ki) * &
	888	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	889	ENDIF
	890	ENDIF
	891	IF ( passive_scalar ) THEN
[2270]	892	sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
[2232]	893	surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
	894	ENDIF
[3658]	895	#endif
[2232]	896
	897	ENDDO
	898
	899	ENDIF
	900	ENDDO
[2696]	901	IF ( surf_lsm_h%end_index(j,i) >= &
	902	surf_lsm_h%start_index(j,i) ) THEN
[2232]	903	m = surf_lsm_h%start_index(j,i)
[3658]	904	!$ACC ATOMIC
[2232]	905	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
[2037]	906	momentumflux_output_conversion(nzb) * &
[2232]	907	surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	908	!$ACC ATOMIC
[2232]	909	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
[2037]	910	momentumflux_output_conversion(nzb) * &
[2232]	911	surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	912	!$ACC ATOMIC
[2232]	913	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
[2037]	914	heatflux_output_conversion(nzb) * &
[2232]	915	surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	916	#if 0
[2232]	917	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
[1353]	918	0.0_wp * rmask(j,i,sr) ! u"pt"
[2232]	919	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
[1353]	920	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	921	#endif
	922	#ifndef _OPENACC
[3294]	923	IF ( ocean_mode ) THEN
[2232]	924	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	925	surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	926	ENDIF
	927	IF ( humidity ) THEN
	928	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
	929	waterflux_output_conversion(nzb) * &
	930	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	931	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	932	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
	933	surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	934	surf_lsm_h%qsws(m) ) &
	935	* heatflux_output_conversion(nzb)
	936	IF ( cloud_droplets ) THEN
	937	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	938	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
	939	ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
	940	0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
	941	* heatflux_output_conversion(nzb)
	942	ENDIF
[3274]	943	IF ( bulk_cloud_model ) THEN
[2232]	944	!
	945	!-- Formula does not work if ql(nzb) /= 0.0
	946	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
	947	waterflux_output_conversion(nzb) * &
	948	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	949	ENDIF
	950	ENDIF
	951	IF ( passive_scalar ) THEN
[2270]	952	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	953	surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	954	ENDIF
[3658]	955	#endif
[2232]	956
[96]	957	ENDIF
[2696]	958	IF ( surf_usm_h%end_index(j,i) >= &
	959	surf_usm_h%start_index(j,i) ) THEN
[2232]	960	m = surf_usm_h%start_index(j,i)
[3658]	961	!$ACC ATOMIC
[2232]	962	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
	963	momentumflux_output_conversion(nzb) * &
	964	surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	965	!$ACC ATOMIC
[2232]	966	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
	967	momentumflux_output_conversion(nzb) * &
	968	surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	969	!$ACC ATOMIC
[2232]	970	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
	971	heatflux_output_conversion(nzb) * &
	972	surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	973	#if 0
[2232]	974	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
	975	0.0_wp * rmask(j,i,sr) ! u"pt"
	976	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
	977	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	978	#endif
	979	#ifndef _OPENACC
[3294]	980	IF ( ocean_mode ) THEN
[2232]	981	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	982	surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	983	ENDIF
	984	IF ( humidity ) THEN
	985	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
[2037]	986	waterflux_output_conversion(nzb) * &
[2232]	987	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	988	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	989	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
[2232]	990	surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	991	surf_usm_h%qsws(m) ) &
[2037]	992	* heatflux_output_conversion(nzb)
[2232]	993	IF ( cloud_droplets ) THEN
	994	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	995	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
[2232]	996	ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
	997	0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
[2037]	998	* heatflux_output_conversion(nzb)
[2232]	999	ENDIF
[3274]	1000	IF ( bulk_cloud_model ) THEN
[1]	1001	!
[2232]	1002	!-- Formula does not work if ql(nzb) /= 0.0
	1003	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
[2037]	1004	waterflux_output_conversion(nzb) * &
[2232]	1005	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1006	ENDIF
[1]	1007	ENDIF
[2232]	1008	IF ( passive_scalar ) THEN
[2270]	1009	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	1010	surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	1011	ENDIF
[3658]	1012	#endif
[2232]	1013
[1]	1014	ENDIF
[2232]	1015
[1]	1016	ENDIF
	1017
[3658]	1018	#ifndef _OPENACC
[1691]	1019	IF ( .NOT. neutral ) THEN
[2696]	1020	IF ( surf_def_h(0)%end_index(j,i) >= &
	1021	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	1022	m = surf_def_h(0)%start_index(j,i)
[2696]	1023	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1024	surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
	1025	ENDIF
[2696]	1026	IF ( surf_lsm_h%end_index(j,i) >= &
	1027	surf_lsm_h%start_index(j,i) ) THEN
[2232]	1028	m = surf_lsm_h%start_index(j,i)
[2696]	1029	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1030	surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
	1031	ENDIF
[2696]	1032	IF ( surf_usm_h%end_index(j,i) >= &
	1033	surf_usm_h%start_index(j,i) ) THEN
[2232]	1034	m = surf_usm_h%start_index(j,i)
[2696]	1035	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1036	surf_usm_h%ol(m) * rmask(j,i,sr) ! L
	1037	ENDIF
[1691]	1038	ENDIF
	1039
[2296]	1040	IF ( radiation ) THEN
[2696]	1041	IF ( surf_def_h(0)%end_index(j,i) >= &
	1042	surf_def_h(0)%start_index(j,i) ) THEN
	1043	m = surf_def_h(0)%start_index(j,i)
	1044	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1045	surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
	1046	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1047	surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
	1048	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1049	surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
	1050	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1051	surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
	1052	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1053	surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
	1054	ENDIF
	1055	IF ( surf_lsm_h%end_index(j,i) >= &
	1056	surf_lsm_h%start_index(j,i) ) THEN
	1057	m = surf_lsm_h%start_index(j,i)
	1058	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1059	surf_lsm_h%rad_net(m) * rmask(j,i,sr)
	1060	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1061	surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
	1062	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1063	surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
	1064	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1065	surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
	1066	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1067	surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
	1068	ENDIF
	1069	IF ( surf_usm_h%end_index(j,i) >= &
	1070	surf_usm_h%start_index(j,i) ) THEN
	1071	m = surf_usm_h%start_index(j,i)
	1072	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1073	surf_usm_h%rad_net(m) * rmask(j,i,sr)
	1074	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1075	surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
	1076	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1077	surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
	1078	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1079	surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
	1080	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1081	surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
	1082	ENDIF
[1585]	1083
	1084	#if defined ( __rrtmg )
	1085	IF ( radiation_scheme == 'rrtmg' ) THEN
[2696]	1086
	1087	IF ( surf_def_h(0)%end_index(j,i) >= &
	1088	surf_def_h(0)%start_index(j,i) ) THEN
	1089	m = surf_def_h(0)%start_index(j,i)
	1090	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1091	surf_def_h(0)%rrtm_aldif(0,m) * rmask(j,i,sr)
[2696]	1092	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1093	surf_def_h(0)%rrtm_aldir(0,m) * rmask(j,i,sr)
[2696]	1094	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1095	surf_def_h(0)%rrtm_asdif(0,m) * rmask(j,i,sr)
[2696]	1096	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1097	surf_def_h(0)%rrtm_asdir(0,m) * rmask(j,i,sr)
[2696]	1098	ENDIF
	1099	IF ( surf_lsm_h%end_index(j,i) >= &
	1100	surf_lsm_h%start_index(j,i) ) THEN
	1101	m = surf_lsm_h%start_index(j,i)
	1102	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1103	SUM( surf_lsm_h%frac(:,m) * &
	1104	surf_lsm_h%rrtm_aldif(:,m) ) * rmask(j,i,sr)
[2696]	1105	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1106	SUM( surf_lsm_h%frac(:,m) * &
	1107	surf_lsm_h%rrtm_aldir(:,m) ) * rmask(j,i,sr)
[2696]	1108	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1109	SUM( surf_lsm_h%frac(:,m) * &
	1110	surf_lsm_h%rrtm_asdif(:,m) ) * rmask(j,i,sr)
[2696]	1111	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1112	SUM( surf_lsm_h%frac(:,m) * &
	1113	surf_lsm_h%rrtm_asdir(:,m) ) * rmask(j,i,sr)
[2696]	1114	ENDIF
	1115	IF ( surf_usm_h%end_index(j,i) >= &
	1116	surf_usm_h%start_index(j,i) ) THEN
	1117	m = surf_usm_h%start_index(j,i)
	1118	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1119	SUM( surf_usm_h%frac(:,m) * &
	1120	surf_usm_h%rrtm_aldif(:,m) ) * rmask(j,i,sr)
[2696]	1121	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1122	SUM( surf_usm_h%frac(:,m) * &
	1123	surf_usm_h%rrtm_aldir(:,m) ) * rmask(j,i,sr)
[2696]	1124	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1125	SUM( surf_usm_h%frac(:,m) * &
	1126	surf_usm_h%rrtm_asdif(:,m) ) * rmask(j,i,sr)
[2696]	1127	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1128	SUM( surf_usm_h%frac(:,m) * &
	1129	surf_usm_h%rrtm_asdir(:,m) ) * rmask(j,i,sr)
[2696]	1130	ENDIF
	1131
[1585]	1132	ENDIF
	1133	#endif
[1551]	1134	ENDIF
[3658]	1135	#endif
[1]	1136	!
[19]	1137	!-- Subgridscale fluxes at the top surface
	1138	IF ( use_top_fluxes ) THEN
[2232]	1139	m = surf_def_h(2)%start_index(j,i)
[3658]	1140	!$ACC ATOMIC
	1141	sums_l(nzt,12,tn) = sums_l(nzt,12,tn) + &
	1142	momentumflux_output_conversion(nzt) * &
[2232]	1143	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	1144	!$ACC ATOMIC
	1145	sums_l(nzt+1,12,tn) = sums_l(nzt+1,12,tn) + &
	1146	momentumflux_output_conversion(nzt+1) * &
	1147	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
	1148	!$ACC ATOMIC
	1149	sums_l(nzt,14,tn) = sums_l(nzt,14,tn) + &
	1150	momentumflux_output_conversion(nzt) * &
[2232]	1151	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	1152	!$ACC ATOMIC
	1153	sums_l(nzt+1,14,tn) = sums_l(nzt+1,14,tn) + &
	1154	momentumflux_output_conversion(nzt+1) * &
	1155	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
	1156	!$ACC ATOMIC
	1157	sums_l(nzt,16,tn) = sums_l(nzt,16,tn) + &
	1158	heatflux_output_conversion(nzt) * &
[2232]	1159	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	1160	!$ACC ATOMIC
	1161	sums_l(nzt+1,16,tn) = sums_l(nzt+1,16,tn) + &
	1162	heatflux_output_conversion(nzt+1) * &
	1163	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
	1164	#if 0
[550]	1165	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
[1353]	1166	0.0_wp * rmask(j,i,sr) ! u"pt"
[550]	1167	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
[1353]	1168	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	1169	#endif
	1170	#ifndef _OPENACC
[3294]	1171	IF ( ocean_mode ) THEN
[96]	1172	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
[2232]	1173	surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
[96]	1174	ENDIF
[75]	1175	IF ( humidity ) THEN
[1353]	1176	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
[2037]	1177	waterflux_output_conversion(nzt) * &
[2232]	1178	surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
[1353]	1179	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1180	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
[2232]	1181	surf_def_h(2)%shf(m) + &
	1182	0.61_wp * pt(nzt,j,i) * &
	1183	surf_def_h(2)%qsws(m) ) &
[2037]	1184	* heatflux_output_conversion(nzt)
[1007]	1185	IF ( cloud_droplets ) THEN
[1353]	1186	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1187	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
[2232]	1188	ql(nzt,j,i) ) * &
	1189	surf_def_h(2)%shf(m) + &
	1190	0.61_wp * pt(nzt,j,i) * &
	1191	surf_def_h(2)%qsws(m) )&
[2037]	1192	* heatflux_output_conversion(nzt)
[1007]	1193	ENDIF
[3274]	1194	IF ( bulk_cloud_model ) THEN
[19]	1195	!
	1196	!-- Formula does not work if ql(nzb) /= 0.0
	1197	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
[2037]	1198	waterflux_output_conversion(nzt) * &
[2232]	1199	surf_def_h(2)%qsws(m) * rmask(j,i,sr)
[19]	1200	ENDIF
	1201	ENDIF
	1202	IF ( passive_scalar ) THEN
[2270]	1203	sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
[2232]	1204	surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
[19]	1205	ENDIF
[3658]	1206	#endif
[19]	1207	ENDIF
	1208
	1209	!
[1]	1210	!-- Resolved fluxes (can be computed for all horizontal points)
[132]	1211	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	1212	!-- ---- speaking the following k-loop would have to be split up and
	1213	!-- rearranged according to the staggered grid.
[2232]	1214	DO k = nzb, nzt
[4346]	1215	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 22 ) )
[1353]	1216	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1217	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1218	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1219	v(k+1,j,i) - hom(k+1,1,2,sr) )
	1220	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
	1221	pt(k+1,j,i) - hom(k+1,1,4,sr) )
[667]	1222
[1]	1223	!-- Higher moments
[3658]	1224	!$ACC ATOMIC
[1353]	1225	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
[2232]	1226	rmask(j,i,sr) * flag
[3658]	1227	!$ACC ATOMIC
[1353]	1228	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
[2232]	1229	rmask(j,i,sr) * flag
[1]	1230
	1231	!
[96]	1232	!-- Salinity flux and density (density does not belong to here,
[97]	1233	!-- but so far there is no other suitable place to calculate)
[3658]	1234	#ifndef _OPENACC
[3294]	1235	IF ( ocean_mode ) THEN
[1567]	1236	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1237	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
	1238	sa(k+1,j,i) - hom(k+1,1,23,sr) )
	1239	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
[2232]	1240	rmask(j,i,sr) * flag
[667]	1241	ENDIF
[2232]	1242	sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
	1243	rmask(j,i,sr) * flag
[1353]	1244	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
[2232]	1245	rmask(j,i,sr) * flag
[96]	1246	ENDIF
	1247
	1248	!
[1053]	1249	!-- Buoyancy flux, water flux, humidity flux, liquid water
	1250	!-- content, rain drop concentration and rain water content
[75]	1251	IF ( humidity ) THEN
[3274]	1252	IF ( bulk_cloud_model .OR. cloud_droplets ) THEN
[1353]	1253	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
[1007]	1254	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
[1353]	1255	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[4039]	1256	rho_air_zw(k) * &
[2037]	1257	heatflux_output_conversion(k) * &
[2232]	1258	rmask(j,i,sr) * flag
	1259	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
	1260	* flag
[1822]	1261
[1053]	1262	IF ( .NOT. cloud_droplets ) THEN
[1353]	1263	pts = 0.5_wp * &
[1115]	1264	( ( q(k,j,i) - ql(k,j,i) ) - &
	1265	hom(k,1,42,sr) + &
	1266	( q(k+1,j,i) - ql(k+1,j,i) ) - &
[1053]	1267	hom(k+1,1,42,sr) )
[1115]	1268	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
[4039]	1269	rho_air_zw(k) * &
[2037]	1270	waterflux_output_conversion(k) * &
[2232]	1271	rmask(j,i,sr) * &
	1272	flag
[1822]	1273	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
[2232]	1274	rmask(j,i,sr) * &
	1275	flag
[1822]	1276	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
[2232]	1277	rmask(j,i,sr) * &
	1278	flag
[2292]	1279	IF ( microphysics_morrison ) THEN
	1280	sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
	1281	rmask(j,i,sr) *&
	1282	flag
	1283	ENDIF
[1822]	1284	IF ( microphysics_seifert ) THEN
	1285	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
[2232]	1286	rmask(j,i,sr) *&
	1287	flag
[1822]	1288	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
[2232]	1289	rmask(j,i,sr) *&
	1290	flag
[1053]	1291	ENDIF
	1292	ENDIF
[1822]	1293
[1007]	1294	ELSE
[1567]	1295	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1296	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
	1297	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
	1298	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[4039]	1299	rho_air_zw(k) * &
[2037]	1300	heatflux_output_conversion(k) * &
[2232]	1301	rmask(j,i,sr) * &
	1302	flag
[1567]	1303	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[2037]	1304	sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
	1305	hom(k,1,41,sr) ) * &
	1306	sums_l(k,17,tn) + &
	1307	0.61_wp * hom(k,1,4,sr) * &
	1308	sums_l(k,49,tn) &
[2232]	1309	) * heatflux_output_conversion(k) * &
	1310	flag
[1007]	1311	END IF
	1312	END IF
[1]	1313	ENDIF
	1314	!
	1315	!-- Passive scalar flux
[1353]	1316	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
[1567]	1317	.OR. sr /= 0 ) ) THEN
[2270]	1318	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1319	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1320	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1321	rmask(j,i,sr) * flag
[1]	1322	ENDIF
[3658]	1323	#endif
[1]	1324
	1325	!
	1326	!-- Energy flux we
[667]	1327	!-- has to be adjusted
[3658]	1328	!$ACC ATOMIC
[1353]	1329	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
	1330	( ust2 + vst2 + w(k,j,i)**2 ) &
[2674]	1331	* rho_air_zw(k) &
[2037]	1332	* momentumflux_output_conversion(k) &
[2232]	1333	* rmask(j,i,sr) * flag
[1]	1334	ENDDO
	1335	ENDDO
	1336	ENDDO
[2232]	1337	!$OMP END PARALLEL
[3658]	1338
	1339	!$ACC UPDATE &
	1340	!$ACC HOST(sums_l(:,12,tn), sums_l(:,14,tn), sums_l(:,16,tn)) &
	1341	!$ACC HOST(sums_l(:,35,tn), sums_l(:,36,tn), sums_l(:,37,tn))
[709]	1342	!
[2232]	1343	!-- Treat land-surface quantities according to new wall model structure.
	1344	IF ( land_surface ) THEN
	1345	tn = 0
	1346	!$OMP PARALLEL PRIVATE( i, j, m, tn )
	1347	!$ tn = omp_get_thread_num()
	1348	!$OMP DO
	1349	DO m = 1, surf_lsm_h%ns
	1350	i = surf_lsm_h%i(m)
	1351	j = surf_lsm_h%j(m)
	1352
	1353	IF ( i >= nxl .AND. i <= nxr .AND. &
	1354	j >= nys .AND. j <= nyn ) THEN
[2270]	1355	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
	1356	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
	1357	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
	1358	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
	1359	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
	1360	sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
[2232]	1361	ENDIF
	1362	ENDDO
	1363	!$OMP END PARALLEL
	1364
	1365	tn = 0
	1366	!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
	1367	!$ tn = omp_get_thread_num()
	1368	!$OMP DO
	1369	DO m = 1, surf_lsm_h%ns
	1370
	1371	i = surf_lsm_h%i(m)
	1372	j = surf_lsm_h%j(m)
	1373
	1374	IF ( i >= nxl .AND. i <= nxr .AND. &
	1375	j >= nys .AND. j <= nyn ) THEN
	1376
	1377	DO k = nzb_soil, nzt_soil
	1378	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
	1379	* rmask(j,i,sr)
	1380	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
	1381	* rmask(j,i,sr)
	1382	ENDDO
	1383	ENDIF
	1384	ENDDO
	1385	!$OMP END PARALLEL
	1386	ENDIF
	1387	!
[709]	1388	!-- For speed optimization fluxes which have been computed in part directly
	1389	!-- inside the WS advection routines are treated seperatly
	1390	!-- Momentum fluxes first:
[2232]	1391
	1392	tn = 0
	1393	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	1394	!$ tn = omp_get_thread_num()
[743]	1395	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
[2232]	1396	!$OMP DO
	1397	DO i = nxl, nxr
	1398	DO j = nys, nyn
	1399	DO k = nzb, nzt
[1007]	1400	!
[2232]	1401	!-- Flag 23 is used to mask surface fluxes as well as model-top
	1402	!-- fluxes, which are added further below.
	1403	flag = MERGE( 1.0_wp, 0.0_wp, &
[4346]	1404	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
[2232]	1405	MERGE( 1.0_wp, 0.0_wp, &
[4346]	1406	BTEST( wall_flags_total_0(k,j,i), 9 ) )
[2232]	1407
	1408	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1409	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1410	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1411	v(k+1,j,i) - hom(k+1,1,2,sr) )
[667]	1412	!
[2232]	1413	!-- Momentum flux wu
	1414	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
	1415	( w(k,j,i-1) + w(k,j,i) ) &
[2674]	1416	* rho_air_zw(k) &
[2232]	1417	* momentumflux_output_conversion(k) &
	1418	* ust * rmask(j,i,sr) &
	1419	* flag
	1420	!
	1421	!-- Momentum flux wv
	1422	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
	1423	( w(k,j-1,i) + w(k,j,i) ) &
[2674]	1424	* rho_air_zw(k) &
[2232]	1425	* momentumflux_output_conversion(k) &
	1426	* vst * rmask(j,i,sr) &
	1427	* flag
	1428	ENDDO
	1429	ENDDO
	1430	ENDDO
[1]	1431
[667]	1432	ENDIF
[1567]	1433	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[2232]	1434	!$OMP DO
	1435	DO i = nxl, nxr
	1436	DO j = nys, nyn
	1437	DO k = nzb, nzt
	1438	flag = MERGE( 1.0_wp, 0.0_wp, &
[4346]	1439	BTEST( wall_flags_total_0(k,j,i), 23 ) ) * &
[2232]	1440	MERGE( 1.0_wp, 0.0_wp, &
[4346]	1441	BTEST( wall_flags_total_0(k,j,i), 9 ) )
[709]	1442	!
[2232]	1443	!-- Vertical heat flux
	1444	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
[1353]	1445	( pt(k,j,i) - hom(k,1,4,sr) + &
	1446	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
[4039]	1447	* rho_air_zw(k) &
[2037]	1448	* heatflux_output_conversion(k) &
[2232]	1449	* w(k,j,i) * rmask(j,i,sr) * flag
	1450	IF ( humidity ) THEN
	1451	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
[1353]	1452	q(k+1,j,i) - hom(k+1,1,41,sr) )
[2232]	1453	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
[4039]	1454	rho_air_zw(k) * &
[2037]	1455	waterflux_output_conversion(k) * &
[2232]	1456	rmask(j,i,sr) * flag
	1457	ENDIF
	1458	IF ( passive_scalar ) THEN
[2270]	1459	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1460	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1461	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1462	rmask(j,i,sr) * flag
	1463	ENDIF
	1464	ENDDO
	1465	ENDDO
	1466	ENDDO
[667]	1467
	1468	ENDIF
	1469
[1]	1470	!
[97]	1471	!-- Density at top follows Neumann condition
[3294]	1472	IF ( ocean_mode ) THEN
[388]	1473	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
	1474	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
	1475	ENDIF
[97]	1476
	1477	!
[1]	1478	!-- Divergence of vertical flux of resolved scale energy and pressure
[106]	1479	!-- fluctuations as well as flux of pressure fluctuation itself (68).
	1480	!-- First calculate the products, then the divergence.
[1]	1481	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
[1691]	1482	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
	1483	THEN
[1353]	1484	sums_ll = 0.0_wp ! local array
[1]	1485
	1486	!$OMP DO
	1487	DO i = nxl, nxr
	1488	DO j = nys, nyn
[2232]	1489	DO k = nzb+1, nzt
[4346]	1490	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[1]	1491
[1353]	1492	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
[1652]	1493	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
	1494	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
	1495	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
[1654]	1496	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
[2232]	1497	+ w(k,j,i)*2 ) flag
[1]	1498
[1353]	1499	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
[2252]	1500	* ( ( p(k,j,i) + p(k+1,j,i) ) &
	1501	/ momentumflux_output_conversion(k) ) &
	1502	* flag
[1]	1503
	1504	ENDDO
	1505	ENDDO
	1506	ENDDO
[1353]	1507	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
	1508	sums_ll(nzt+1,1) = 0.0_wp
	1509	sums_ll(0,2) = 0.0_wp
	1510	sums_ll(nzt+1,2) = 0.0_wp
[1]	1511
[678]	1512	DO k = nzb+1, nzt
[1]	1513	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
	1514	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
[106]	1515	sums_l(k,68,tn) = sums_ll(k,2)
[1]	1516	ENDDO
	1517	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
	1518	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
[1353]	1519	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
[1]	1520
	1521	ENDIF
	1522
	1523	!
[106]	1524	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
[1691]	1525	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
	1526	THEN
[1]	1527	!$OMP DO
	1528	DO i = nxl, nxr
	1529	DO j = nys, nyn
[2232]	1530	DO k = nzb+1, nzt
[1]	1531
[4346]	1532	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[2232]	1533
[1353]	1534	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
[1]	1535	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
	1536	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
[2232]	1537	) * ddzw(k) &
	1538	* flag
[1]	1539
[1353]	1540	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
[106]	1541	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
[2232]	1542	) * flag
[106]	1543
[1]	1544	ENDDO
	1545	ENDDO
	1546	ENDDO
	1547	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
[106]	1548	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
[1]	1549
	1550	ENDIF
	1551
	1552	!
	1553	!-- Horizontal heat fluxes (subgrid, resolved, total).
	1554	!-- Do it only, if profiles shall be plotted.
[1353]	1555	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
[1]	1556
	1557	!$OMP DO
	1558	DO i = nxl, nxr
	1559	DO j = nys, nyn
[2232]	1560	DO k = nzb+1, nzt
[4346]	1561	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[1]	1562	!
	1563	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
[1353]	1564	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
[1]	1565	( kh(k,j,i) + kh(k,j,i-1) ) &
	1566	* ( pt(k,j,i-1) - pt(k,j,i) ) &
[2037]	1567	* rho_air_zw(k) &
	1568	* heatflux_output_conversion(k) &
[2232]	1569	* ddx * rmask(j,i,sr) * flag
[1353]	1570	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
[1]	1571	( kh(k,j,i) + kh(k,j-1,i) ) &
	1572	* ( pt(k,j-1,i) - pt(k,j,i) ) &
[2037]	1573	* rho_air_zw(k) &
	1574	* heatflux_output_conversion(k) &
[2232]	1575	* ddy * rmask(j,i,sr) * flag
[1]	1576	!
	1577	!-- Resolved horizontal heat fluxes upt, vpt
	1578	sums_l(k,59,tn) = sums_l(k,59,tn) + &
	1579	( u(k,j,i) - hom(k,1,1,sr) ) &
[1353]	1580	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
[2037]	1581	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1582	* heatflux_output_conversion(k) &
	1583	* flag
[1353]	1584	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
	1585	pt(k,j,i) - hom(k,1,4,sr) )
[1]	1586	sums_l(k,62,tn) = sums_l(k,62,tn) + &
	1587	( v(k,j,i) - hom(k,1,2,sr) ) &
[1353]	1588	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
[2037]	1589	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1590	* heatflux_output_conversion(k) &
	1591	* flag
[1]	1592	ENDDO
	1593	ENDDO
	1594	ENDDO
	1595	!
	1596	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
[1353]	1597	sums_l(nzb,58,tn) = 0.0_wp
	1598	sums_l(nzb,59,tn) = 0.0_wp
	1599	sums_l(nzb,60,tn) = 0.0_wp
	1600	sums_l(nzb,61,tn) = 0.0_wp
	1601	sums_l(nzb,62,tn) = 0.0_wp
	1602	sums_l(nzb,63,tn) = 0.0_wp
[1]	1603
	1604	ENDIF
[2073]	1605	!$OMP END PARALLEL
[87]	1606
	1607	!
[1365]	1608	!-- Collect current large scale advection and subsidence tendencies for
	1609	!-- data output
[1691]	1610	IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
[1365]	1611	!
	1612	!-- Interpolation in time of LSF_DATA
	1613	nt = 1
[1386]	1614	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
[1365]	1615	nt = nt + 1
	1616	ENDDO
[1386]	1617	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
[1365]	1618	nt = nt - 1
	1619	ENDIF
	1620
[1386]	1621	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
[1365]	1622	/ ( time_vert(nt+1)-time_vert(nt) )
	1623
	1624
	1625	DO k = nzb, nzt
[1382]	1626	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
	1627	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
	1628	sums_ls_l(k,1) = td_lsa_q(k,nt) &
	1629	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
[1365]	1630	ENDDO
	1631
[1382]	1632	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
	1633	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
	1634
[1365]	1635	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
	1636
	1637	DO k = nzb, nzt
[1382]	1638	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
	1639	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
	1640	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
	1641	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
[1365]	1642	ENDDO
	1643
[1382]	1644	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
	1645	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
	1646
[1365]	1647	ENDIF
	1648
	1649	ENDIF
	1650
[2232]	1651	tn = 0
[2073]	1652	!$OMP PARALLEL PRIVATE( i, j, k, tn )
[2232]	1653	!$ tn = omp_get_thread_num()
[1585]	1654	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
	1655	!$OMP DO
	1656	DO i = nxl, nxr
	1657	DO j = nys, nyn
[2232]	1658	DO k = nzb+1, nzt+1
[4346]	1659	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) )
[2232]	1660
[2270]	1661	sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
[2232]	1662	* rmask(j,i,sr) * flag
[2270]	1663	sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
[2232]	1664	* rmask(j,i,sr) * flag
[2270]	1665	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
[2232]	1666	* rmask(j,i,sr) * flag
[2270]	1667	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
[2232]	1668	* rmask(j,i,sr) * flag
[2270]	1669	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
[2232]	1670	* rmask(j,i,sr) * flag
[2270]	1671	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
[2232]	1672	* rmask(j,i,sr) * flag
[2270]	1673	sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
[2232]	1674	* rmask(j,i,sr) * flag
[2270]	1675	sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
[2232]	1676	* rmask(j,i,sr) * flag
[1585]	1677	ENDDO
	1678	ENDDO
	1679	ENDDO
	1680	ENDIF
[3637]	1681
[1365]	1682	!
[3637]	1683	!-- Calculate the profiles for all other modules
	1684	CALL module_interface_statistics( 'profiles', sr, tn, dots_max )
[3651]	1685	!$OMP END PARALLEL
[1]	1686
	1687	!
	1688	!-- Summation of thread sums
	1689	IF ( threads_per_task > 1 ) THEN
	1690	DO i = 1, threads_per_task-1
	1691	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
	1692	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
[87]	1693	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
	1694	sums_l(:,45:pr_palm,i)
	1695	IF ( max_pr_user > 0 ) THEN
	1696	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
	1697	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
	1698	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
	1699	ENDIF
[3298]	1700
	1701	IF ( air_chemistry ) THEN
	1702	IF ( max_pr_cs > 0 ) THEN
	1703	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+ max_pr_cs,0) = &
	1704	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,0) + &
	1705	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,i)
	1706
	1707	ENDIF
	1708	ENDIF
[4131]	1709	IF ( salsa ) THEN
	1710	IF ( max_pr_cs > 0 ) THEN
	1711	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) = &
	1712	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) + &
	1713	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,i)
	1714
	1715	ENDIF
	1716	ENDIF
[1]	1717	ENDDO
	1718	ENDIF
	1719
	1720	#if defined( __parallel )
[667]	1721
[1]	1722	!
	1723	!-- Compute total sum from local sums
[622]	1724	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1365]	1725	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
[1]	1726	MPI_SUM, comm2d, ierr )
[1365]	1727	IF ( large_scale_forcing ) THEN
	1728	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
	1729	MPI_REAL, MPI_SUM, comm2d, ierr )
	1730	ENDIF
[3298]	1731
[3458]	1732	IF ( air_chemistry .AND. max_pr_cs > 0 ) THEN
[3298]	1733	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[3458]	1734	DO i = 1, max_pr_cs
	1735	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+i,0), &
	1736	sums(nzb,pr_palm+max_pr_user+i), &
	1737	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
	1738	ENDDO
[3298]	1739	ENDIF
	1740
[4131]	1741	IF ( salsa .AND. max_pr_salsa > 0 ) THEN
	1742	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
	1743	DO i = 1, max_pr_salsa
	1744	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+max_pr_cs+i,0), &
	1745	sums(nzb,pr_palm+max_pr_user+max_pr_user+i), &
	1746	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
	1747	ENDDO
	1748	ENDIF
	1749
[1]	1750	#else
	1751	sums = sums_l(:,:,0)
[1365]	1752	IF ( large_scale_forcing ) THEN
	1753	sums(:,81:88) = sums_ls_l
	1754	ENDIF
[1]	1755	#endif
	1756
	1757	!
	1758	!-- Final values are obtained by division by the total number of grid points
	1759	!-- used for summation. After that store profiles.
[1738]	1760	!-- Check, if statistical regions do contain at least one grid point at the
	1761	!-- respective k-level, otherwise division by zero will lead to undefined
	1762	!-- values, which may cause e.g. problems with NetCDF output
[1]	1763	!-- Profiles:
	1764	DO k = nzb, nzt+1
[1738]	1765	sums(k,3) = sums(k,3) / ngp_2dh(sr)
	1766	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
	1767	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
	1768	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
	1769	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
	1770	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
	1771	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
[2270]	1772	sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
	1773	sums(k,114) = sums(k,114) / ngp_2dh(sr)
	1774	sums(k,117) = sums(k,117) / ngp_2dh(sr)
[1738]	1775	IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
	1776	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
	1777	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
	1778	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
	1779	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
	1780	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
	1781	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
	1782	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
[2270]	1783	sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
	1784	sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
[3452]	1785	sums(k,123) = sums(k,123) * ngp_2dh_s_inner(k,sr) / ngp_2dh(sr)
[1738]	1786	ENDIF
[1]	1787	ENDDO
[667]	1788
[1]	1789	!-- u* and so on
[87]	1790	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
[1]	1791	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
	1792	!-- above the topography, they are being divided by ngp_2dh(sr)
[87]	1793	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
[1]	1794	ngp_2dh(sr)
[197]	1795	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
	1796	ngp_2dh(sr)
[1960]	1797	sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
	1798	ngp_2dh(sr)
[2773]	1799	sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
	1800	ngp_2dh(sr)
[1]	1801	!-- eges, e*
[87]	1802	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
[132]	1803	ngp_3d(sr)
[1]	1804	!-- Old and new divergence
[87]	1805	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
[1]	1806	ngp_3d_inner(sr)
	1807
[87]	1808	!-- User-defined profiles
	1809	IF ( max_pr_user > 0 ) THEN
	1810	DO k = nzb, nzt+1
	1811	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
	1812	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
[132]	1813	ngp_2dh_s_inner(k,sr)
[87]	1814	ENDDO
	1815	ENDIF
[1007]	1816
[3298]	1817	IF ( air_chemistry ) THEN
	1818	IF ( max_pr_cs > 0 ) THEN
	1819	DO k = nzb, nzt+1
	1820	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) = &
	1821	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) / &
	1822	ngp_2dh_s_inner(k,sr)
	1823	ENDDO
	1824	ENDIF
	1825	ENDIF
	1826
[4131]	1827	IF ( salsa ) THEN
	1828	IF ( max_pr_salsa > 0 ) THEN
	1829	DO k = nzb, nzt+1
	1830	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) = &
	1831	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) &
	1832	/ ngp_2dh_s_inner(k,sr)
	1833	ENDDO
	1834	ENDIF
	1835	ENDIF
	1836
[1]	1837	!
	1838	!-- Collect horizontal average in hom.
	1839	!-- Compute deduced averages (e.g. total heat flux)
	1840	hom(:,1,3,sr) = sums(:,3) ! w
	1841	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
	1842	hom(:,1,9,sr) = sums(:,9) ! km
	1843	hom(:,1,10,sr) = sums(:,10) ! kh
	1844	hom(:,1,11,sr) = sums(:,11) ! l
	1845	hom(:,1,12,sr) = sums(:,12) ! w"u"
	1846	hom(:,1,13,sr) = sums(:,13) ! wu
	1847	hom(:,1,14,sr) = sums(:,14) ! w"v"
	1848	hom(:,1,15,sr) = sums(:,15) ! wv
	1849	hom(:,1,16,sr) = sums(:,16) ! w"pt"
	1850	hom(:,1,17,sr) = sums(:,17) ! wpt
	1851	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
	1852	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
	1853	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
	1854	hom(:,1,21,sr) = sums(:,21) ! wptBC
	1855	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
[96]	1856	! profile 24 is initial profile (sa)
	1857	! profiles 25-29 left empty for initial
[1]	1858	! profiles
	1859	hom(:,1,30,sr) = sums(:,30) ! u*2
	1860	hom(:,1,31,sr) = sums(:,31) ! v*2
	1861	hom(:,1,32,sr) = sums(:,32) ! w*2
	1862	hom(:,1,33,sr) = sums(:,33) ! pt*2
	1863	hom(:,1,34,sr) = sums(:,34) ! e*
	1864	hom(:,1,35,sr) = sums(:,35) ! w2pt
	1865	hom(:,1,36,sr) = sums(:,36) ! wpt2
	1866	hom(:,1,37,sr) = sums(:,37) ! we
	1867	hom(:,1,38,sr) = sums(:,38) ! w*3
[1353]	1868	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
[1]	1869	hom(:,1,40,sr) = sums(:,40) ! p
[531]	1870	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
[1]	1871	hom(:,1,46,sr) = sums(:,46) ! wvpt
	1872	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
	1873	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
	1874	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
	1875	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
	1876	hom(:,1,51,sr) = sums(:,51) ! w"qv"
	1877	hom(:,1,52,sr) = sums(:,52) ! wqv
	1878	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
	1879	hom(:,1,54,sr) = sums(:,54) ! ql
	1880	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
	1881	hom(:,1,56,sr) = sums(:,56) ! wp/dz
[2031]	1882	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
[1]	1883	hom(:,1,58,sr) = sums(:,58) ! u"pt"
	1884	hom(:,1,59,sr) = sums(:,59) ! upt
	1885	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
	1886	hom(:,1,61,sr) = sums(:,61) ! v"pt"
	1887	hom(:,1,62,sr) = sums(:,62) ! vpt
	1888	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
[2031]	1889	hom(:,1,64,sr) = sums(:,64) ! rho_ocean
[96]	1890	hom(:,1,65,sr) = sums(:,65) ! w"sa"
	1891	hom(:,1,66,sr) = sums(:,66) ! wsa
	1892	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
[106]	1893	hom(:,1,68,sr) = sums(:,68) ! wp
[2031]	1894	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
[197]	1895	hom(:,1,70,sr) = sums(:,70) ! q*2
[388]	1896	hom(:,1,71,sr) = sums(:,71) ! prho
[2252]	1897	hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
[2292]	1898	hom(:,1,123,sr) = sums(:,123) ! nc
[1053]	1899	hom(:,1,73,sr) = sums(:,73) ! nr
	1900	hom(:,1,74,sr) = sums(:,74) ! qr
	1901	hom(:,1,75,sr) = sums(:,75) ! qc
	1902	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
[1179]	1903	! 77 is initial density profile
[1241]	1904	hom(:,1,78,sr) = ug ! ug
	1905	hom(:,1,79,sr) = vg ! vg
[1299]	1906	hom(:,1,80,sr) = w_subs ! w_subs
[1]	1907
[1365]	1908	IF ( large_scale_forcing ) THEN
[1382]	1909	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
	1910	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
[1365]	1911	IF ( use_subsidence_tendencies ) THEN
[1382]	1912	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
	1913	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
[1365]	1914	ELSE
[1382]	1915	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
	1916	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
[1365]	1917	ENDIF
[1382]	1918	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
	1919	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
	1920	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
	1921	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
[1365]	1922	ENDIF
	1923
[1551]	1924	IF ( land_surface ) THEN
	1925	hom(:,1,89,sr) = sums(:,89) ! t_soil
	1926	! 90 is initial t_soil profile
	1927	hom(:,1,91,sr) = sums(:,91) ! m_soil
	1928	! 92 is initial m_soil profile
[2270]	1929	hom(:,1,93,sr) = sums(:,93) ! ghf
	1930	hom(:,1,94,sr) = sums(:,94) ! qsws_liq
	1931	hom(:,1,95,sr) = sums(:,95) ! qsws_soil
	1932	hom(:,1,96,sr) = sums(:,96) ! qsws_veg
	1933	hom(:,1,97,sr) = sums(:,97) ! r_a
	1934	hom(:,1,98,sr) = sums(:,98) ! r_s
[1555]	1935
[1551]	1936	ENDIF
	1937
	1938	IF ( radiation ) THEN
[2270]	1939	hom(:,1,99,sr) = sums(:,99) ! rad_net
	1940	hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
	1941	hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
	1942	hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
	1943	hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
[1585]	1944
[1691]	1945	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	1946	hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
	1947	hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
	1948	hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
	1949	hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
[1691]	1950
[2270]	1951	hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
	1952	hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
	1953	hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
	1954	hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
[1585]	1955	ENDIF
[1551]	1956	ENDIF
	1957
[2270]	1958	hom(:,1,112,sr) = sums(:,112) !: L
[1691]	1959
[1960]	1960	IF ( passive_scalar ) THEN
[2270]	1961	hom(:,1,117,sr) = sums(:,117) ! w"s"
	1962	hom(:,1,114,sr) = sums(:,114) ! ws
	1963	hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
	1964	hom(:,1,116,sr) = sums(:,116) ! s*2
[1960]	1965	ENDIF
	1966
[2270]	1967	hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
	1968	hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
[2037]	1969
[667]	1970	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
[1]	1971	! u, w'u', w'v', t (in last profile)
	1972
[87]	1973	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
	1974	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
	1975	sums(:,pr_palm+1:pr_palm+max_pr_user)
	1976	ENDIF
	1977
[3298]	1978	IF ( air_chemistry ) THEN
	1979	IF ( max_pr_cs > 0 ) THEN ! chem_spcs profiles
	1980	hom(:, 1, pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs, sr) = &
	1981	sums(:, pr_palm+max_pr_user+1:pr_palm+max_pr_user+max_pr_cs)
	1982	ENDIF
	1983	ENDIF
[4131]	1984
	1985	IF ( salsa ) THEN
	1986	IF ( max_pr_salsa > 0 ) THEN ! salsa profiles
	1987	hom(:,1,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa, sr) = &
	1988	sums(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa)
	1989	ENDIF
	1990	ENDIF
[1]	1991	!
	1992	!-- Determine the boundary layer height using two different schemes.
[94]	1993	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
	1994	!-- first relative minimum (maximum) of the total heat flux.
	1995	!-- The corresponding height is assumed as the boundary layer height, if it
	1996	!-- is less than 1.5 times the height where the heat flux becomes negative
[3004]	1997	!-- (positive) for the first time. Attention: the resolved vertical sensible
	1998	!-- heat flux (hom(:,1,17,sr) = wpt) is not known at the beginning because
	1999	!-- the calculation happens in advec_s_ws which is called after
	2000	!-- flow_statistics. Therefore z_i is directly taken from restart data at
	2001	!-- the beginning of restart runs.
[3003]	2002	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .OR. &
	2003	simulated_time_at_begin /= simulated_time ) THEN
[667]	2004
[3003]	2005	z_i(1) = 0.0_wp
	2006	first = .TRUE.
	2007
[3294]	2008	IF ( ocean_mode ) THEN
[3003]	2009	DO k = nzt, nzb+1, -1
	2010	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2011	first = .FALSE.
	2012	height = zw(k)
[97]	2013	ENDIF
[3003]	2014	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2015	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2016	IF ( zw(k) < 1.5_wp * height ) THEN
	2017	z_i(1) = zw(k)
	2018	ELSE
	2019	z_i(1) = height
	2020	ENDIF
	2021	EXIT
[94]	2022	ENDIF
[3003]	2023	ENDDO
	2024	ELSE
	2025	DO k = nzb, nzt-1
	2026	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2027	first = .FALSE.
	2028	height = zw(k)
	2029	ENDIF
	2030	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2031	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2032	IF ( zw(k) < 1.5_wp * height ) THEN
	2033	z_i(1) = zw(k)
	2034	ELSE
	2035	z_i(1) = height
	2036	ENDIF
	2037	EXIT
	2038	ENDIF
	2039	ENDDO
	2040	ENDIF
[1]	2041
	2042	!
[3003]	2043	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
	2044	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
	2045	!-- maximal local temperature gradient: starting from the second (the
	2046	!-- last but one) vertical gridpoint, the local gradient must be at least
	2047	!-- 0.2K/100m and greater than the next four gradients.
	2048	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
	2049	!-- ocean case!
	2050	z_i(2) = 0.0_wp
	2051	DO k = nzb+1, nzt+1
	2052	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
	2053	ENDDO
	2054	dptdz_threshold = 0.2_wp / 100.0_wp
[291]	2055
[3294]	2056	IF ( ocean_mode ) THEN
[3003]	2057	DO k = nzt+1, nzb+5, -1
	2058	IF ( dptdz(k) > dptdz_threshold .AND. &
	2059	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND.&
	2060	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
	2061	z_i(2) = zw(k-1)
	2062	EXIT
	2063	ENDIF
	2064	ENDDO
	2065	ELSE
	2066	DO k = nzb+1, nzt-3
	2067	IF ( dptdz(k) > dptdz_threshold .AND. &
	2068	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND.&
	2069	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
	2070	z_i(2) = zw(k-1)
	2071	EXIT
	2072	ENDIF
	2073	ENDDO
	2074	ENDIF
	2075
[97]	2076	ENDIF
[1]	2077
[87]	2078	hom(nzb+6,1,pr_palm,sr) = z_i(1)
	2079	hom(nzb+7,1,pr_palm,sr) = z_i(2)
[1]	2080
	2081	!
[1738]	2082	!-- Determine vertical index which is nearest to the mean surface level
	2083	!-- height of the respective statistic region
	2084	DO k = nzb, nzt
	2085	IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
	2086	k_surface_level = k
	2087	EXIT
	2088	ENDIF
	2089	ENDDO
[3003]	2090
[1738]	2091	!
[1]	2092	!-- Computation of both the characteristic vertical velocity and
	2093	!-- the characteristic convective boundary layer temperature.
[1738]	2094	!-- The inversion height entering into the equation is defined with respect
	2095	!-- to the mean surface level height of the respective statistic region.
	2096	!-- The horizontal average at surface level index + 1 is input for the
	2097	!-- average temperature.
	2098	IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
	2099	THEN
[2252]	2100	hom(nzb+8,1,pr_palm,sr) = &
[2037]	2101	( g / hom(k_surface_level+1,1,4,sr) * &
[2252]	2102	( hom(k_surface_level,1,18,sr) / &
	2103	( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
[1738]	2104	* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
[1]	2105	ELSE
[1353]	2106	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
[1]	2107	ENDIF
	2108
[48]	2109	!
[2968]	2110	!-- Collect the time series quantities. Please note, timeseries quantities
	2111	!-- which are collected from horizontally averaged profiles, e.g. wpt
	2112	!-- or pt(zp), are treated specially. In case of elevated model surfaces,
	2113	!-- index nzb+1 might be within topography and data will be zero. Therefore,
	2114	!-- take value for the first atmosphere index, which is topo_min_level+1.
	2115	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
	2116	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
[48]	2117	ts_value(3,sr) = dt_3d
[2968]	2118	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
	2119	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
[48]	2120	ts_value(6,sr) = u_max
	2121	ts_value(7,sr) = v_max
	2122	ts_value(8,sr) = w_max
[2968]	2123	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
	2124	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
	2125	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
	2126	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
	2127	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
	2128	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
	2129	ts_value(15,sr) = hom(topo_min_level+1,1,16,sr) ! w'pt' at k=1
	2130	ts_value(16,sr) = hom(topo_min_level+1,1,18,sr) ! wpt at k=1
	2131	ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
	2132	ts_value(18,sr) = hom(topo_min_level+1,1,4,sr) ! pt(zp)
	2133	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
	2134	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
	2135	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
[1709]	2136
	2137	IF ( .NOT. neutral ) THEN
[2270]	2138	ts_value(22,sr) = hom(nzb,1,112,sr) ! L
[48]	2139	ELSE
[1709]	2140	ts_value(22,sr) = 1.0E10_wp
[48]	2141	ENDIF
[1]	2142
[343]	2143	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
[1551]	2144
[1960]	2145	IF ( passive_scalar ) THEN
[2270]	2146	ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
[1960]	2147	ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
	2148	ENDIF
	2149
[1]	2150	!
[1551]	2151	!-- Collect land surface model timeseries
	2152	IF ( land_surface ) THEN
[2270]	2153	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
	2154	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
	2155	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
	2156	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
	2157	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
	2158	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
[1551]	2159	ENDIF
	2160	!
	2161	!-- Collect radiation model timeseries
	2162	IF ( radiation ) THEN
[2270]	2163	ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
	2164	ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
	2165	ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
	2166	ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
	2167	ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
[1585]	2168
	2169	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	2170	ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
	2171	ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
	2172	ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
	2173	ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
[1585]	2174	ENDIF
	2175
[1551]	2176	ENDIF
	2177
	2178	!
[3637]	2179	!-- Calculate additional statistics provided by other modules
	2180	CALL module_interface_statistics( 'time_series', sr, 0, dots_max )
[2817]	2181
[48]	2182	ENDDO ! loop of the subregions
	2183
[1]	2184	!
[1918]	2185	!-- If required, sum up horizontal averages for subsequent time averaging.
	2186	!-- Do not sum, if flow statistics is called before the first initial time step.
	2187	IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
[1353]	2188	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
[1]	2189	hom_sum = hom_sum + hom(:,1,:,:)
	2190	average_count_pr = average_count_pr + 1
	2191	do_sum = .FALSE.
	2192	ENDIF
	2193
	2194	!
	2195	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
	2196	!-- This flag is reset after each time step in time_integration.
	2197	flow_statistics_called = .TRUE.
	2198
	2199	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
	2200
	2201
	2202	END SUBROUTINE flow_statistics

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |