Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 4329

Last change on this file since 4329 was 4329, checked in by motisi, 5 years ago
Renamed wall_flags_0 to wall_flags_static_0
Property svn:keywords set to `Id`
File size: 106.1 KB

Rev	Line
[1682]	1	!> @file flow_statistics.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[3651]	17	! Copyright 1997-2019 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[3298]	21	! ------------------
[1961]	22	!
[3042]	23	!
[1739]	24	! Former revisions:
	25	! -----------------
	26	! $Id: flow_statistics.f90 4329 2019-12-10 15:46:36Z motisi $
[4329]	27	! Renamed wall_flags_0 to wall_flags_static_0
	28	!
	29	! 4182 2019-08-22 15:20:23Z scharf
[4182]	30	! Corrected "Former revisions" section
	31	!
	32	! 4131 2019-08-02 11:06:18Z monakurppa
[4131]	33	! Allow profile output for salsa variables.
	34	!
	35	! 4039 2019-06-18 10:32:41Z suehring
[4039]	36	! Correct conversion to kinematic scalar fluxes in case of pw-scheme and
	37	! statistic regions
	38	!
	39	! 3828 2019-03-27 19:36:23Z raasch
[3828]	40	! unused variables removed
	41	!
	42	! 3676 2019-01-16 15:07:05Z knoop
[3651]	43	! Bugfix, terminate OMP Parallel block
[3298]	44	!
[4182]	45	! Revision 1.1 1997/08/11 06:15:17 raasch
	46	! Initial revision
	47	!
	48	!
[1]	49	! Description:
	50	! ------------
[1682]	51	!> Compute average profiles and further average flow quantities for the different
	52	!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
	53	!>
	54	!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
	55	!> lower vertical index for k-loops for all variables, although strictly
	56	!> speaking the k-loops would have to be split up according to the staggered
	57	!> grid. However, this implies no error since staggered velocity components
	58	!> are zero at the walls and inside buildings.
[1]	59	!------------------------------------------------------------------------------!
[1682]	60	SUBROUTINE flow_statistics
[1]	61
[3298]	62
[1320]	63	USE arrays_3d, &
[2037]	64	ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
[2292]	65	momentumflux_output_conversion, nc, nr, p, prho, prr, pt, q, &
[2232]	66	qc, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
[3274]	67	sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, &
	68	zw, d_exner
[3298]	69
[3274]	70	USE basic_constants_and_equations_mod, &
[3298]	71	ONLY: g, lv_d_cp
	72
[3637]	73	USE bulk_cloud_model_mod, &
	74	ONLY: bulk_cloud_model, microphysics_morrison, microphysics_seifert
[3298]	75
	76	USE chem_modules, &
	77	ONLY: max_pr_cs
	78
[1320]	79	USE control_parameters, &
[3298]	80	ONLY: air_chemistry, average_count_pr, cloud_droplets, do_sum, &
[3274]	81	dt_3d, humidity, initializing_actions, land_surface, &
[3003]	82	large_scale_forcing, large_scale_subsidence, max_pr_user, &
[3294]	83	message_string, neutral, ocean_mode, passive_scalar, &
	84	simulated_time, simulated_time_at_begin, &
	85	use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
[4131]	86	ws_scheme_mom, ws_scheme_sca, salsa, max_pr_salsa
[3298]	87
[1320]	88	USE cpulog, &
[1551]	89	ONLY: cpu_log, log_point
[3298]	90
[1320]	91	USE grid_variables, &
[1551]	92	ONLY: ddx, ddy
[1320]	93
	94	USE indices, &
[1551]	95	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, ngp_sums, &
[2968]	96	ngp_sums_ls, nxl, nxr, nyn, nys, nzb, nzt, topo_min_level, &
[4329]	97	wall_flags_static_0
[1320]	98
	99	USE kinds
	100
[1551]	101	USE land_surface_model_mod, &
[2232]	102	ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
[1551]	103
[2320]	104	USE lsf_nudging_mod, &
	105	ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
	106
[3637]	107	USE module_interface, &
	108	ONLY: module_interface_statistics
	109
[1783]	110	USE netcdf_interface, &
[2817]	111	ONLY: dots_rad, dots_soil, dots_max
[1783]	112
[1]	113	USE pegrid
[1551]	114
	115	USE radiation_model_mod, &
[2696]	116	ONLY: radiation, radiation_scheme, &
[1691]	117	rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
	118	rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
[1585]	119
[1]	120	USE statistics
	121
[3828]	122	USE surface_mod, &
	123	ONLY : surf_def_h, surf_lsm_h, surf_usm_h
[1691]	124
[2232]	125
[1]	126	IMPLICIT NONE
	127
[1682]	128	INTEGER(iwp) :: i !<
	129	INTEGER(iwp) :: j !<
	130	INTEGER(iwp) :: k !<
[2232]	131	INTEGER(iwp) :: ki !<
[1738]	132	INTEGER(iwp) :: k_surface_level !<
[2232]	133	INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
	134	INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
[1682]	135	INTEGER(iwp) :: nt !<
[3241]	136	!$ INTEGER(iwp) :: omp_get_thread_num !<
[1682]	137	INTEGER(iwp) :: sr !<
	138	INTEGER(iwp) :: tn !<
[2232]	139
[1682]	140	LOGICAL :: first !<
[1320]	141
[1682]	142	REAL(wp) :: dptdz_threshold !<
	143	REAL(wp) :: fac !<
[2232]	144	REAL(wp) :: flag !<
[1682]	145	REAL(wp) :: height !<
	146	REAL(wp) :: pts !<
	147	REAL(wp) :: sums_l_etot !<
	148	REAL(wp) :: ust !<
	149	REAL(wp) :: ust2 !<
	150	REAL(wp) :: u2 !<
	151	REAL(wp) :: vst !<
	152	REAL(wp) :: vst2 !<
	153	REAL(wp) :: v2 !<
	154	REAL(wp) :: w2 !<
[1320]	155
[1682]	156	REAL(wp) :: dptdz(nzb+1:nzt+1) !<
	157	REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
[1]	158
	159	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
	160
[1221]	161
[1]	162	!
	163	!-- To be on the safe side, check whether flow_statistics has already been
	164	!-- called once after the current time step
	165	IF ( flow_statistics_called ) THEN
[254]	166
[274]	167	message_string = 'flow_statistics is called two times within one ' // &
	168	'timestep'
[254]	169	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
[1007]	170
[1]	171	ENDIF
	172
	173	!
	174	!-- Compute statistics for each (sub-)region
	175	DO sr = 0, statistic_regions
	176
	177	!
	178	!-- Initialize (local) summation array
[1353]	179	sums_l = 0.0_wp
[3658]	180	#ifdef _OPENACC
	181	!$ACC KERNELS PRESENT(sums_l)
	182	sums_l = 0.0_wp
	183	!$ACC END KERNELS
	184	#endif
[1]	185
	186	!
	187	!-- Store sums that have been computed in other subroutines in summation
	188	!-- array
	189	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
	190	!-- WARNING: next line still has to be adjusted for OpenMP
[2037]	191	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
	192	heatflux_output_conversion ! heat flux from advec_s_bc
[87]	193	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
	194	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
[1]	195
[667]	196	!
[1498]	197	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
	198	!-- scale) vertical fluxes and velocity variances by using commonly-
	199	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
	200	!-- in combination with the 5th order advection scheme, pronounced
	201	!-- artificial kinks could be observed in the vertical profiles near the
	202	!-- surface. Please note: these kinks were not related to the model truth,
	203	!-- i.e. these kinks are just related to an evaluation problem.
	204	!-- In order avoid these kinks, vertical fluxes and horizontal as well
	205	!-- vertical velocity variances are calculated directly within the advection
	206	!-- routines, according to the numerical discretization, to evaluate the
	207	!-- statistical quantities as they will appear within the prognostic
	208	!-- equations.
[667]	209	!-- Copy the turbulent quantities, evaluated in the advection routines to
[1498]	210	!-- the local array sums_l() for further computations.
[743]	211	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
[696]	212
[1007]	213	!
[673]	214	!-- According to the Neumann bc for the horizontal velocity components,
	215	!-- the corresponding fluxes has to satisfiy the same bc.
[3294]	216	IF ( ocean_mode ) THEN
[801]	217	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
[1007]	218	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
[673]	219	ENDIF
[696]	220
	221	DO i = 0, threads_per_task-1
[1007]	222	!
[696]	223	!-- Swap the turbulent quantities evaluated in advec_ws.
[2037]	224	sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
	225	* momentumflux_output_conversion ! wu
	226	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
	227	* momentumflux_output_conversion ! wv
[801]	228	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
	229	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
	230	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
[1353]	231	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
[1320]	232	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
[801]	233	sums_ws2_ws_l(:,i) ) ! e*
[667]	234	ENDDO
[696]	235
[667]	236	ENDIF
[696]	237
[1567]	238	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[696]	239
	240	DO i = 0, threads_per_task-1
[2037]	241	sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
	242	* heatflux_output_conversion ! wpt
[3294]	243	IF ( ocean_mode ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
[2037]	244	IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
	245	* waterflux_output_conversion ! wq
[2270]	246	IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! ws
[696]	247	ENDDO
	248
[667]	249	ENDIF
[305]	250	!
[1]	251	!-- Horizontally averaged profiles of horizontal velocities and temperature.
	252	!-- They must have been computed before, because they are already required
	253	!-- for other horizontal averages.
	254	tn = 0
[2232]	255	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	256	!$ tn = omp_get_thread_num()
[1]	257	!$OMP DO
[3658]	258	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag) &
[4329]	259	!$ACC PRESENT(wall_flags_static_0, u, v, pt, rmask, sums_l)
[1]	260	DO i = nxl, nxr
	261	DO j = nys, nyn
[2232]	262	DO k = nzb, nzt+1
[4329]	263	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 22 ) )
[3658]	264	!$ACC ATOMIC
[2232]	265	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
	266	* flag
[3658]	267	!$ACC ATOMIC
[2232]	268	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
	269	* flag
[3658]	270	!$ACC ATOMIC
[2232]	271	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
	272	* flag
[1]	273	ENDDO
	274	ENDDO
	275	ENDDO
[3658]	276	!$ACC UPDATE HOST(sums_l(:,1,tn), sums_l(:,2,tn), sums_l(:,4,tn))
[1]	277
	278	!
[96]	279	!-- Horizontally averaged profile of salinity
[3294]	280	IF ( ocean_mode ) THEN
[96]	281	!$OMP DO
	282	DO i = nxl, nxr
	283	DO j = nys, nyn
[2232]	284	DO k = nzb, nzt+1
	285	sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
	286	* rmask(j,i,sr) &
	287	* MERGE( 1.0_wp, 0.0_wp, &
[4329]	288	BTEST( wall_flags_static_0(k,j,i), 22 ) )
[96]	289	ENDDO
	290	ENDDO
	291	ENDDO
	292	ENDIF
	293
	294	!
[1]	295	!-- Horizontally averaged profiles of virtual potential temperature,
[3040]	296	!-- total water content, water vapor mixing ratio and liquid water potential
[1]	297	!-- temperature
[75]	298	IF ( humidity ) THEN
[1]	299	!$OMP DO
	300	DO i = nxl, nxr
	301	DO j = nys, nyn
[2232]	302	DO k = nzb, nzt+1
[4329]	303	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 22 ) )
[2232]	304	sums_l(k,44,tn) = sums_l(k,44,tn) + &
	305	vpt(k,j,i) * rmask(j,i,sr) * flag
	306	sums_l(k,41,tn) = sums_l(k,41,tn) + &
	307	q(k,j,i) * rmask(j,i,sr) * flag
[1]	308	ENDDO
	309	ENDDO
	310	ENDDO
[3274]	311	IF ( bulk_cloud_model ) THEN
[1]	312	!$OMP DO
	313	DO i = nxl, nxr
	314	DO j = nys, nyn
[2232]	315	DO k = nzb, nzt+1
[4329]	316	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 22 ) )
[2232]	317	sums_l(k,42,tn) = sums_l(k,42,tn) + &
	318	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
	319	* flag
	320	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
[3274]	321	pt(k,j,i) + lv_d_cp * d_exner(k) * ql(k,j,i) &
[2232]	322	) * rmask(j,i,sr) &
	323	* flag
[1]	324	ENDDO
	325	ENDDO
	326	ENDDO
	327	ENDIF
	328	ENDIF
	329
	330	!
	331	!-- Horizontally averaged profiles of passive scalar
	332	IF ( passive_scalar ) THEN
	333	!$OMP DO
	334	DO i = nxl, nxr
	335	DO j = nys, nyn
[2232]	336	DO k = nzb, nzt+1
[2270]	337	sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
[2232]	338	* rmask(j,i,sr) &
	339	* MERGE( 1.0_wp, 0.0_wp, &
[4329]	340	BTEST( wall_flags_static_0(k,j,i), 22 ) )
[1]	341	ENDDO
	342	ENDDO
	343	ENDDO
	344	ENDIF
	345	!$OMP END PARALLEL
	346	!
	347	!-- Summation of thread sums
	348	IF ( threads_per_task > 1 ) THEN
	349	DO i = 1, threads_per_task-1
	350	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
	351	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
	352	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
[3294]	353	IF ( ocean_mode ) THEN
[96]	354	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
	355	ENDIF
[75]	356	IF ( humidity ) THEN
[1]	357	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
	358	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
[3274]	359	IF ( bulk_cloud_model ) THEN
[1]	360	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
	361	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
	362	ENDIF
	363	ENDIF
	364	IF ( passive_scalar ) THEN
[2270]	365	sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
[1]	366	ENDIF
	367	ENDDO
	368	ENDIF
	369
	370	#if defined( __parallel )
	371	!
	372	!-- Compute total sum from local sums
[622]	373	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	374	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
[1]	375	MPI_SUM, comm2d, ierr )
[622]	376	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	377	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
[1]	378	MPI_SUM, comm2d, ierr )
[622]	379	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	380	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
[1]	381	MPI_SUM, comm2d, ierr )
[3294]	382	IF ( ocean_mode ) THEN
[622]	383	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	384	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
[96]	385	MPI_REAL, MPI_SUM, comm2d, ierr )
	386	ENDIF
[75]	387	IF ( humidity ) THEN
[622]	388	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	389	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
[1]	390	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	391	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	392	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
[1]	393	MPI_REAL, MPI_SUM, comm2d, ierr )
[3274]	394	IF ( bulk_cloud_model ) THEN
[622]	395	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	396	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
[1]	397	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	398	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	399	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
[1]	400	MPI_REAL, MPI_SUM, comm2d, ierr )
	401	ENDIF
	402	ENDIF
	403
	404	IF ( passive_scalar ) THEN
[622]	405	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2270]	406	CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
[1]	407	MPI_REAL, MPI_SUM, comm2d, ierr )
	408	ENDIF
	409	#else
	410	sums(:,1) = sums_l(:,1,0)
	411	sums(:,2) = sums_l(:,2,0)
	412	sums(:,4) = sums_l(:,4,0)
[3294]	413	IF ( ocean_mode ) sums(:,23) = sums_l(:,23,0)
[75]	414	IF ( humidity ) THEN
[1]	415	sums(:,44) = sums_l(:,44,0)
	416	sums(:,41) = sums_l(:,41,0)
[3274]	417	IF ( bulk_cloud_model ) THEN
[1]	418	sums(:,42) = sums_l(:,42,0)
	419	sums(:,43) = sums_l(:,43,0)
	420	ENDIF
	421	ENDIF
[2270]	422	IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
[1]	423	#endif
	424
	425	!
	426	!-- Final values are obtained by division by the total number of grid points
	427	!-- used for summation. After that store profiles.
[132]	428	sums(:,1) = sums(:,1) / ngp_2dh(sr)
	429	sums(:,2) = sums(:,2) / ngp_2dh(sr)
	430	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
[1]	431	hom(:,1,1,sr) = sums(:,1) ! u
	432	hom(:,1,2,sr) = sums(:,2) ! v
	433	hom(:,1,4,sr) = sums(:,4) ! pt
[3658]	434	!$ACC UPDATE DEVICE(hom(:,1,1,sr), hom(:,1,2,sr), hom(:,1,4,sr))
[1]	435
[667]	436
[1]	437	!
[96]	438	!-- Salinity
[3294]	439	IF ( ocean_mode ) THEN
[132]	440	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
[96]	441	hom(:,1,23,sr) = sums(:,23) ! sa
	442	ENDIF
	443
	444	!
[1]	445	!-- Humidity and cloud parameters
[75]	446	IF ( humidity ) THEN
[132]	447	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
	448	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
[1]	449	hom(:,1,44,sr) = sums(:,44) ! vpt
	450	hom(:,1,41,sr) = sums(:,41) ! qv (q)
[3274]	451	IF ( bulk_cloud_model ) THEN
[132]	452	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
	453	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
[1]	454	hom(:,1,42,sr) = sums(:,42) ! qv
	455	hom(:,1,43,sr) = sums(:,43) ! pt
	456	ENDIF
	457	ENDIF
	458
	459	!
	460	!-- Passive scalar
[2270]	461	IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
[1960]	462	ngp_2dh_s_inner(:,sr) ! s
[1]	463
	464	!
	465	!-- Horizontally averaged profiles of the remaining prognostic variables,
	466	!-- variances, the total and the perturbation energy (single values in last
	467	!-- column of sums_l) and some diagnostic quantities.
[132]	468	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	469	!-- ---- speaking the following k-loop would have to be split up and
	470	!-- rearranged according to the staggered grid.
[132]	471	!-- However, this implies no error since staggered velocity components
	472	!-- are zero at the walls and inside buildings.
[1]	473	tn = 0
[3241]	474	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, &
[1815]	475	!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
[2232]	476	!$OMP w2, flag, m, ki, l )
	477	!$ tn = omp_get_thread_num()
[1]	478	!$OMP DO
[3658]	479	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, m) &
	480	!$ACC PRIVATE(sums_l_etot, flag) &
[4329]	481	!$ACC PRESENT(wall_flags_static_0, rmask, momentumflux_output_conversion) &
[3658]	482	!$ACC PRESENT(hom(:,1,4,sr)) &
	483	!$ACC PRESENT(e, u, v, w, km, kh, p, pt) &
	484	!$ACC PRESENT(surf_def_h(0), surf_lsm_h, surf_usm_h) &
	485	!$ACC PRESENT(sums_l)
[1]	486	DO i = nxl, nxr
	487	DO j = nys, nyn
[1353]	488	sums_l_etot = 0.0_wp
[2232]	489	DO k = nzb, nzt+1
[4329]	490	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 22 ) )
[1]	491	!
	492	!-- Prognostic and diagnostic variables
[3658]	493	!$ACC ATOMIC
[2232]	494	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
	495	* flag
[3658]	496	!$ACC ATOMIC
[2232]	497	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
	498	* flag
[3658]	499	!$ACC ATOMIC
[2232]	500	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
	501	* flag
[3658]	502	!$ACC ATOMIC
[2232]	503	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
	504	* flag
[3658]	505	!$ACC ATOMIC
[2252]	506	sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
	507	/ momentumflux_output_conversion(k) ) &
	508	* flag
[1]	509
[3658]	510	!$ACC ATOMIC
[1]	511	sums_l(k,33,tn) = sums_l(k,33,tn) + &
[2232]	512	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)&
	513	* flag
[3658]	514	#ifndef _OPENACC
[624]	515	IF ( humidity ) THEN
	516	sums_l(k,70,tn) = sums_l(k,70,tn) + &
[2232]	517	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)&
	518	* flag
[624]	519	ENDIF
[1960]	520	IF ( passive_scalar ) THEN
[2270]	521	sums_l(k,116,tn) = sums_l(k,116,tn) + &
	522	( s(k,j,i)-hom(k,1,115,sr) )*2 rmask(j,i,sr)&
[2232]	523	* flag
[1960]	524	ENDIF
[3658]	525	#endif
[699]	526	!
	527	!-- Higher moments
	528	!-- (Computation of the skewness of w further below)
[3658]	529	!$ACC ATOMIC
[2232]	530	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr) &
	531	* flag
[667]	532
[1]	533	sums_l_etot = sums_l_etot + &
[2232]	534	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
	535	w(k,j,i)*2 ) rmask(j,i,sr)&
	536	* flag
[1]	537	ENDDO
	538	!
	539	!-- Total and perturbation energy for the total domain (being
	540	!-- collected in the last column of sums_l). Summation of these
	541	!-- quantities is seperated from the previous loop in order to
	542	!-- allow vectorization of that loop.
[3658]	543	!$ACC ATOMIC
[87]	544	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
[1]	545	!
	546	!-- 2D-arrays (being collected in the last column of sums_l)
[2773]	547	IF ( surf_def_h(0)%end_index(j,i) >= &
[2696]	548	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	549	m = surf_def_h(0)%start_index(j,i)
[3658]	550	!$ACC ATOMIC
[2773]	551	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	552	surf_def_h(0)%us(m) * rmask(j,i,sr)
[3658]	553	!$ACC ATOMIC
[2773]	554	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	555	surf_def_h(0)%usws(m) * rmask(j,i,sr)
[3658]	556	!$ACC ATOMIC
[2773]	557	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	558	surf_def_h(0)%vsws(m) * rmask(j,i,sr)
[3658]	559	!$ACC ATOMIC
[2773]	560	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	561	surf_def_h(0)%ts(m) * rmask(j,i,sr)
[3658]	562	#ifndef _OPENACC
[2232]	563	IF ( humidity ) THEN
[2773]	564	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	565	surf_def_h(0)%qs(m) * rmask(j,i,sr)
	566	ENDIF
	567	IF ( passive_scalar ) THEN
[2773]	568	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	569	surf_def_h(0)%ss(m) * rmask(j,i,sr)
	570	ENDIF
[3658]	571	#endif
[2773]	572	!
	573	!-- Summation of surface temperature.
[3658]	574	!$ACC ATOMIC
[2773]	575	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	576	surf_def_h(0)%pt_surface(m) * &
	577	rmask(j,i,sr)
[197]	578	ENDIF
[2696]	579	IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
[2232]	580	m = surf_lsm_h%start_index(j,i)
[3658]	581	!$ACC ATOMIC
[2773]	582	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	583	surf_lsm_h%us(m) * rmask(j,i,sr)
[3658]	584	!$ACC ATOMIC
[2773]	585	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	586	surf_lsm_h%usws(m) * rmask(j,i,sr)
[3658]	587	!$ACC ATOMIC
[2773]	588	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	589	surf_lsm_h%vsws(m) * rmask(j,i,sr)
[3658]	590	!$ACC ATOMIC
[2773]	591	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	592	surf_lsm_h%ts(m) * rmask(j,i,sr)
[3658]	593	#ifndef _OPENACC
[2232]	594	IF ( humidity ) THEN
[2773]	595	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	596	surf_lsm_h%qs(m) * rmask(j,i,sr)
	597	ENDIF
	598	IF ( passive_scalar ) THEN
[2773]	599	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	600	surf_lsm_h%ss(m) * rmask(j,i,sr)
	601	ENDIF
[3658]	602	#endif
[2773]	603	!
	604	!-- Summation of surface temperature.
[3658]	605	!$ACC ATOMIC
[2773]	606	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	607	surf_lsm_h%pt_surface(m) * &
	608	rmask(j,i,sr)
[1960]	609	ENDIF
[2696]	610	IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
	611	m = surf_usm_h%start_index(j,i)
[3658]	612	!$ACC ATOMIC
[2773]	613	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	614	surf_usm_h%us(m) * rmask(j,i,sr)
[3658]	615	!$ACC ATOMIC
[2773]	616	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	617	surf_usm_h%usws(m) * rmask(j,i,sr)
[3658]	618	!$ACC ATOMIC
[2773]	619	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	620	surf_usm_h%vsws(m) * rmask(j,i,sr)
[3658]	621	!$ACC ATOMIC
[2773]	622	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	623	surf_usm_h%ts(m) * rmask(j,i,sr)
[3658]	624	#ifndef _OPENACC
[2232]	625	IF ( humidity ) THEN
[2773]	626	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	627	surf_usm_h%qs(m) * rmask(j,i,sr)
	628	ENDIF
	629	IF ( passive_scalar ) THEN
[2773]	630	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	631	surf_usm_h%ss(m) * rmask(j,i,sr)
	632	ENDIF
[3658]	633	#endif
[2773]	634	!
	635	!-- Summation of surface temperature.
[3658]	636	!$ACC ATOMIC
[2773]	637	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	638	surf_usm_h%pt_surface(m) * &
	639	rmask(j,i,sr)
[2232]	640	ENDIF
[1]	641	ENDDO
	642	ENDDO
[3658]	643	!$ACC UPDATE &
	644	!$ACC HOST(sums_l(:,3,tn), sums_l(:,8,tn), sums_l(:,9,tn)) &
	645	!$ACC HOST(sums_l(:,10,tn), sums_l(:,40,tn), sums_l(:,33,tn)) &
	646	!$ACC HOST(sums_l(:,38,tn)) &
	647	!$ACC HOST(sums_l(nzb:nzb+4,pr_palm,tn), sums_l(nzb+14:nzb+14,pr_palm,tn))
[1]	648
	649	!
[667]	650	!-- Computation of statistics when ws-scheme is not used. Else these
	651	!-- quantities are evaluated in the advection routines.
[1918]	652	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
	653	THEN
[667]	654	!$OMP DO
	655	DO i = nxl, nxr
	656	DO j = nys, nyn
[2232]	657	DO k = nzb, nzt+1
[4329]	658	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 22 ) )
[2232]	659
[667]	660	u2 = u(k,j,i)**2
	661	v2 = v(k,j,i)**2
	662	w2 = w(k,j,i)**2
	663	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	664	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	665
[2232]	666	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
	667	* flag
	668	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
	669	* flag
	670	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
	671	* flag
[667]	672	!
[2026]	673	!-- Perturbation energy
[667]	674
[1353]	675	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
[2232]	676	( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
	677	* flag
[667]	678	ENDDO
	679	ENDDO
	680	ENDDO
	681	ENDIF
[2026]	682	!
	683	!-- Computaion of domain-averaged perturbation energy. Please note,
	684	!-- to prevent that perturbation energy is larger (even if only slightly)
	685	!-- than the total kinetic energy, calculation is based on deviations from
	686	!-- the horizontal mean, instead of spatial descretization of the advection
	687	!-- term.
	688	!$OMP DO
[3658]	689	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag, w2, ust2, vst2) &
[4329]	690	!$ACC PRESENT(wall_flags_static_0, u, v, w, rmask, hom(:,1,1:2,sr)) &
[3658]	691	!$ACC PRESENT(sums_l)
[2026]	692	DO i = nxl, nxr
	693	DO j = nys, nyn
[2232]	694	DO k = nzb, nzt+1
[4329]	695	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 22 ) )
[2232]	696
[2026]	697	w2 = w(k,j,i)**2
	698	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	699	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	700	w2 = w(k,j,i)**2
[1241]	701
[3658]	702	!$ACC ATOMIC
[2026]	703	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
[2232]	704	+ 0.5_wp * ( ust2 + vst2 + w2 ) &
	705	* rmask(j,i,sr) &
	706	* flag
[2026]	707	ENDDO
	708	ENDDO
	709	ENDDO
[3658]	710	!$ACC UPDATE HOST(sums_l(nzb+5:nzb+5,pr_palm,tn))
[2026]	711
[667]	712	!
[1]	713	!-- Horizontally averaged profiles of the vertical fluxes
[667]	714
[1]	715	!$OMP DO
[3658]	716	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, l, m) &
	717	!$ACC PRIVATE(ki, flag, ust, vst, pts) &
	718	!$ACC PRESENT(kh, km, u, v, w, pt) &
[4329]	719	!$ACC PRESENT(wall_flags_static_0, rmask, ddzu, rho_air_zw, hom(:,1,1:4,sr)) &
[3658]	720	!$ACC PRESENT(heatflux_output_conversion, momentumflux_output_conversion) &
	721	!$ACC PRESENT(surf_def_h(0:2), surf_lsm_h, surf_usm_h) &
	722	!$ACC PRESENT(sums_l)
[1]	723	DO i = nxl, nxr
	724	DO j = nys, nyn
	725	!
	726	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
	727	!-- oterwise from k=nzb+1)
[132]	728	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
[1]	729	!-- ---- strictly speaking the following k-loop would have to be
	730	!-- split up according to the staggered grid.
[132]	731	!-- However, this implies no error since staggered velocity
	732	!-- components are zero at the walls and inside buildings.
[2232]	733	!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
	734	!-- which are added further below.
	735	DO k = nzb, nzt
	736	flag = MERGE( 1.0_wp, 0.0_wp, &
[4329]	737	BTEST( wall_flags_static_0(k,j,i), 23 ) ) * &
[2232]	738	MERGE( 1.0_wp, 0.0_wp, &
[4329]	739	BTEST( wall_flags_static_0(k,j,i), 9 ) )
[1]	740	!
	741	!-- Momentum flux w"u"
[3658]	742	!$ACC ATOMIC
[1353]	743	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
[1]	744	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
	745	) * ( &
	746	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
	747	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
[2037]	748	) * rmask(j,i,sr) &
	749	* rho_air_zw(k) &
[2232]	750	* momentumflux_output_conversion(k) &
	751	* flag
[1]	752	!
	753	!-- Momentum flux w"v"
[3658]	754	!$ACC ATOMIC
[1353]	755	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
[1]	756	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
	757	) * ( &
	758	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
	759	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
[2037]	760	) * rmask(j,i,sr) &
	761	* rho_air_zw(k) &
[2232]	762	* momentumflux_output_conversion(k) &
	763	* flag
[1]	764	!
	765	!-- Heat flux w"pt"
[3658]	766	!$ACC ATOMIC
[1]	767	sums_l(k,16,tn) = sums_l(k,16,tn) &
[1353]	768	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	769	* ( pt(k+1,j,i) - pt(k,j,i) ) &
[2037]	770	* rho_air_zw(k) &
	771	* heatflux_output_conversion(k) &
[2232]	772	* ddzu(k+1) * rmask(j,i,sr) &
	773	* flag
[1]	774
	775	!
[96]	776	!-- Salinity flux w"sa"
[3658]	777	#ifndef _OPENACC
[3294]	778	IF ( ocean_mode ) THEN
[96]	779	sums_l(k,65,tn) = sums_l(k,65,tn) &
[1353]	780	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[96]	781	* ( sa(k+1,j,i) - sa(k,j,i) ) &
[2232]	782	* ddzu(k+1) * rmask(j,i,sr) &
	783	* flag
[96]	784	ENDIF
	785
	786	!
[1]	787	!-- Buoyancy flux, water flux (humidity flux) w"q"
[75]	788	IF ( humidity ) THEN
[1]	789	sums_l(k,45,tn) = sums_l(k,45,tn) &
[1353]	790	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	791	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
[2037]	792	* rho_air_zw(k) &
	793	* heatflux_output_conversion(k) &
[2232]	794	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	795	sums_l(k,48,tn) = sums_l(k,48,tn) &
[1353]	796	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	797	* ( q(k+1,j,i) - q(k,j,i) ) &
[2037]	798	* rho_air_zw(k) &
	799	* waterflux_output_conversion(k)&
[2232]	800	* ddzu(k+1) * rmask(j,i,sr) * flag
[1007]	801
[3274]	802	IF ( bulk_cloud_model ) THEN
[1]	803	sums_l(k,51,tn) = sums_l(k,51,tn) &
[1353]	804	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	805	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
	806	- ( q(k,j,i) - ql(k,j,i) ) ) &
[2037]	807	* rho_air_zw(k) &
	808	* waterflux_output_conversion(k)&
[2232]	809	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	810	ENDIF
	811	ENDIF
	812
	813	!
	814	!-- Passive scalar flux
	815	IF ( passive_scalar ) THEN
[2270]	816	sums_l(k,117,tn) = sums_l(k,117,tn) &
[1353]	817	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[2026]	818	* ( s(k+1,j,i) - s(k,j,i) ) &
[2232]	819	* ddzu(k+1) * rmask(j,i,sr) &
	820	* flag
[1]	821	ENDIF
[3658]	822	#endif
[1]	823
	824	ENDDO
	825
	826	!
	827	!-- Subgridscale fluxes in the Prandtl layer
	828	IF ( use_surface_fluxes ) THEN
[2232]	829	DO l = 0, 1
[3658]	830	! The original code using MERGE doesn't work with the PGI
	831	! compiler when running on the GPU.
[3676]	832	! This is submitted as a compiler Bug in PGI ticket TPR#26718
[3658]	833	! ki = MERGE( -1, 0, l == 0 )
	834	ki = -1 + l
[2232]	835	IF ( surf_def_h(l)%ns >= 1 ) THEN
[2696]	836	DO m = surf_def_h(l)%start_index(j,i), &
	837	surf_def_h(l)%end_index(j,i)
[2232]	838	k = surf_def_h(l)%k(m)
	839
[3658]	840	!$ACC ATOMIC
[2232]	841	sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
	842	momentumflux_output_conversion(k+ki) * &
	843	surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	844	!$ACC ATOMIC
[2232]	845	sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
	846	momentumflux_output_conversion(k+ki) * &
	847	surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	848	!$ACC ATOMIC
[2232]	849	sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
	850	heatflux_output_conversion(k+ki) * &
	851	surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	852	#if 0
[2232]	853	sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
	854	0.0_wp * rmask(j,i,sr) ! u"pt"
	855	sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
	856	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	857	#endif
	858	#ifndef _OPENACC
[3294]	859	IF ( ocean_mode ) THEN
[2232]	860	sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
	861	surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
	862	ENDIF
	863	IF ( humidity ) THEN
	864	sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
	865	waterflux_output_conversion(k+ki) * &
	866	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	867	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	868	( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
	869	surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
	870	surf_def_h(l)%qsws(m) ) &
	871	* heatflux_output_conversion(k+ki)
	872	IF ( cloud_droplets ) THEN
	873	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	874	( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
	875	ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
	876	0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
	877	* heatflux_output_conversion(k+ki)
	878	ENDIF
[3274]	879	IF ( bulk_cloud_model ) THEN
[2232]	880	!
	881	!-- Formula does not work if ql(k+ki) /= 0.0
	882	sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
	883	waterflux_output_conversion(k+ki) * &
	884	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	885	ENDIF
	886	ENDIF
	887	IF ( passive_scalar ) THEN
[2270]	888	sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
[2232]	889	surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
	890	ENDIF
[3658]	891	#endif
[2232]	892
	893	ENDDO
	894
	895	ENDIF
	896	ENDDO
[2696]	897	IF ( surf_lsm_h%end_index(j,i) >= &
	898	surf_lsm_h%start_index(j,i) ) THEN
[2232]	899	m = surf_lsm_h%start_index(j,i)
[3658]	900	!$ACC ATOMIC
[2232]	901	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
[2037]	902	momentumflux_output_conversion(nzb) * &
[2232]	903	surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	904	!$ACC ATOMIC
[2232]	905	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
[2037]	906	momentumflux_output_conversion(nzb) * &
[2232]	907	surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	908	!$ACC ATOMIC
[2232]	909	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
[2037]	910	heatflux_output_conversion(nzb) * &
[2232]	911	surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	912	#if 0
[2232]	913	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
[1353]	914	0.0_wp * rmask(j,i,sr) ! u"pt"
[2232]	915	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
[1353]	916	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	917	#endif
	918	#ifndef _OPENACC
[3294]	919	IF ( ocean_mode ) THEN
[2232]	920	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	921	surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	922	ENDIF
	923	IF ( humidity ) THEN
	924	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
	925	waterflux_output_conversion(nzb) * &
	926	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	927	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	928	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
	929	surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	930	surf_lsm_h%qsws(m) ) &
	931	* heatflux_output_conversion(nzb)
	932	IF ( cloud_droplets ) THEN
	933	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	934	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
	935	ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
	936	0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
	937	* heatflux_output_conversion(nzb)
	938	ENDIF
[3274]	939	IF ( bulk_cloud_model ) THEN
[2232]	940	!
	941	!-- Formula does not work if ql(nzb) /= 0.0
	942	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
	943	waterflux_output_conversion(nzb) * &
	944	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	945	ENDIF
	946	ENDIF
	947	IF ( passive_scalar ) THEN
[2270]	948	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	949	surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	950	ENDIF
[3658]	951	#endif
[2232]	952
[96]	953	ENDIF
[2696]	954	IF ( surf_usm_h%end_index(j,i) >= &
	955	surf_usm_h%start_index(j,i) ) THEN
[2232]	956	m = surf_usm_h%start_index(j,i)
[3658]	957	!$ACC ATOMIC
[2232]	958	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
	959	momentumflux_output_conversion(nzb) * &
	960	surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	961	!$ACC ATOMIC
[2232]	962	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
	963	momentumflux_output_conversion(nzb) * &
	964	surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	965	!$ACC ATOMIC
[2232]	966	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
	967	heatflux_output_conversion(nzb) * &
	968	surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	969	#if 0
[2232]	970	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
	971	0.0_wp * rmask(j,i,sr) ! u"pt"
	972	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
	973	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	974	#endif
	975	#ifndef _OPENACC
[3294]	976	IF ( ocean_mode ) THEN
[2232]	977	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	978	surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	979	ENDIF
	980	IF ( humidity ) THEN
	981	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
[2037]	982	waterflux_output_conversion(nzb) * &
[2232]	983	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	984	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	985	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
[2232]	986	surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	987	surf_usm_h%qsws(m) ) &
[2037]	988	* heatflux_output_conversion(nzb)
[2232]	989	IF ( cloud_droplets ) THEN
	990	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	991	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
[2232]	992	ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
	993	0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
[2037]	994	* heatflux_output_conversion(nzb)
[2232]	995	ENDIF
[3274]	996	IF ( bulk_cloud_model ) THEN
[1]	997	!
[2232]	998	!-- Formula does not work if ql(nzb) /= 0.0
	999	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
[2037]	1000	waterflux_output_conversion(nzb) * &
[2232]	1001	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1002	ENDIF
[1]	1003	ENDIF
[2232]	1004	IF ( passive_scalar ) THEN
[2270]	1005	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	1006	surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	1007	ENDIF
[3658]	1008	#endif
[2232]	1009
[1]	1010	ENDIF
[2232]	1011
[1]	1012	ENDIF
	1013
[3658]	1014	#ifndef _OPENACC
[1691]	1015	IF ( .NOT. neutral ) THEN
[2696]	1016	IF ( surf_def_h(0)%end_index(j,i) >= &
	1017	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	1018	m = surf_def_h(0)%start_index(j,i)
[2696]	1019	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1020	surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
	1021	ENDIF
[2696]	1022	IF ( surf_lsm_h%end_index(j,i) >= &
	1023	surf_lsm_h%start_index(j,i) ) THEN
[2232]	1024	m = surf_lsm_h%start_index(j,i)
[2696]	1025	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1026	surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
	1027	ENDIF
[2696]	1028	IF ( surf_usm_h%end_index(j,i) >= &
	1029	surf_usm_h%start_index(j,i) ) THEN
[2232]	1030	m = surf_usm_h%start_index(j,i)
[2696]	1031	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1032	surf_usm_h%ol(m) * rmask(j,i,sr) ! L
	1033	ENDIF
[1691]	1034	ENDIF
	1035
[2296]	1036	IF ( radiation ) THEN
[2696]	1037	IF ( surf_def_h(0)%end_index(j,i) >= &
	1038	surf_def_h(0)%start_index(j,i) ) THEN
	1039	m = surf_def_h(0)%start_index(j,i)
	1040	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1041	surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
	1042	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1043	surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
	1044	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1045	surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
	1046	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1047	surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
	1048	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1049	surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
	1050	ENDIF
	1051	IF ( surf_lsm_h%end_index(j,i) >= &
	1052	surf_lsm_h%start_index(j,i) ) THEN
	1053	m = surf_lsm_h%start_index(j,i)
	1054	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1055	surf_lsm_h%rad_net(m) * rmask(j,i,sr)
	1056	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1057	surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
	1058	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1059	surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
	1060	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1061	surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
	1062	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1063	surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
	1064	ENDIF
	1065	IF ( surf_usm_h%end_index(j,i) >= &
	1066	surf_usm_h%start_index(j,i) ) THEN
	1067	m = surf_usm_h%start_index(j,i)
	1068	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1069	surf_usm_h%rad_net(m) * rmask(j,i,sr)
	1070	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1071	surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
	1072	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1073	surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
	1074	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1075	surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
	1076	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1077	surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
	1078	ENDIF
[1585]	1079
	1080	#if defined ( __rrtmg )
	1081	IF ( radiation_scheme == 'rrtmg' ) THEN
[2696]	1082
	1083	IF ( surf_def_h(0)%end_index(j,i) >= &
	1084	surf_def_h(0)%start_index(j,i) ) THEN
	1085	m = surf_def_h(0)%start_index(j,i)
	1086	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1087	surf_def_h(0)%rrtm_aldif(0,m) * rmask(j,i,sr)
[2696]	1088	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1089	surf_def_h(0)%rrtm_aldir(0,m) * rmask(j,i,sr)
[2696]	1090	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1091	surf_def_h(0)%rrtm_asdif(0,m) * rmask(j,i,sr)
[2696]	1092	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1093	surf_def_h(0)%rrtm_asdir(0,m) * rmask(j,i,sr)
[2696]	1094	ENDIF
	1095	IF ( surf_lsm_h%end_index(j,i) >= &
	1096	surf_lsm_h%start_index(j,i) ) THEN
	1097	m = surf_lsm_h%start_index(j,i)
	1098	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1099	SUM( surf_lsm_h%frac(:,m) * &
	1100	surf_lsm_h%rrtm_aldif(:,m) ) * rmask(j,i,sr)
[2696]	1101	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1102	SUM( surf_lsm_h%frac(:,m) * &
	1103	surf_lsm_h%rrtm_aldir(:,m) ) * rmask(j,i,sr)
[2696]	1104	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1105	SUM( surf_lsm_h%frac(:,m) * &
	1106	surf_lsm_h%rrtm_asdif(:,m) ) * rmask(j,i,sr)
[2696]	1107	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1108	SUM( surf_lsm_h%frac(:,m) * &
	1109	surf_lsm_h%rrtm_asdir(:,m) ) * rmask(j,i,sr)
[2696]	1110	ENDIF
	1111	IF ( surf_usm_h%end_index(j,i) >= &
	1112	surf_usm_h%start_index(j,i) ) THEN
	1113	m = surf_usm_h%start_index(j,i)
	1114	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1115	SUM( surf_usm_h%frac(:,m) * &
	1116	surf_usm_h%rrtm_aldif(:,m) ) * rmask(j,i,sr)
[2696]	1117	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1118	SUM( surf_usm_h%frac(:,m) * &
	1119	surf_usm_h%rrtm_aldir(:,m) ) * rmask(j,i,sr)
[2696]	1120	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1121	SUM( surf_usm_h%frac(:,m) * &
	1122	surf_usm_h%rrtm_asdif(:,m) ) * rmask(j,i,sr)
[2696]	1123	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1124	SUM( surf_usm_h%frac(:,m) * &
	1125	surf_usm_h%rrtm_asdir(:,m) ) * rmask(j,i,sr)
[2696]	1126	ENDIF
	1127
[1585]	1128	ENDIF
	1129	#endif
[1551]	1130	ENDIF
[3658]	1131	#endif
[1]	1132	!
[19]	1133	!-- Subgridscale fluxes at the top surface
	1134	IF ( use_top_fluxes ) THEN
[2232]	1135	m = surf_def_h(2)%start_index(j,i)
[3658]	1136	!$ACC ATOMIC
	1137	sums_l(nzt,12,tn) = sums_l(nzt,12,tn) + &
	1138	momentumflux_output_conversion(nzt) * &
[2232]	1139	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	1140	!$ACC ATOMIC
	1141	sums_l(nzt+1,12,tn) = sums_l(nzt+1,12,tn) + &
	1142	momentumflux_output_conversion(nzt+1) * &
	1143	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
	1144	!$ACC ATOMIC
	1145	sums_l(nzt,14,tn) = sums_l(nzt,14,tn) + &
	1146	momentumflux_output_conversion(nzt) * &
[2232]	1147	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	1148	!$ACC ATOMIC
	1149	sums_l(nzt+1,14,tn) = sums_l(nzt+1,14,tn) + &
	1150	momentumflux_output_conversion(nzt+1) * &
	1151	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
	1152	!$ACC ATOMIC
	1153	sums_l(nzt,16,tn) = sums_l(nzt,16,tn) + &
	1154	heatflux_output_conversion(nzt) * &
[2232]	1155	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	1156	!$ACC ATOMIC
	1157	sums_l(nzt+1,16,tn) = sums_l(nzt+1,16,tn) + &
	1158	heatflux_output_conversion(nzt+1) * &
	1159	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
	1160	#if 0
[550]	1161	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
[1353]	1162	0.0_wp * rmask(j,i,sr) ! u"pt"
[550]	1163	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
[1353]	1164	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	1165	#endif
	1166	#ifndef _OPENACC
[3294]	1167	IF ( ocean_mode ) THEN
[96]	1168	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
[2232]	1169	surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
[96]	1170	ENDIF
[75]	1171	IF ( humidity ) THEN
[1353]	1172	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
[2037]	1173	waterflux_output_conversion(nzt) * &
[2232]	1174	surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
[1353]	1175	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1176	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
[2232]	1177	surf_def_h(2)%shf(m) + &
	1178	0.61_wp * pt(nzt,j,i) * &
	1179	surf_def_h(2)%qsws(m) ) &
[2037]	1180	* heatflux_output_conversion(nzt)
[1007]	1181	IF ( cloud_droplets ) THEN
[1353]	1182	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1183	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
[2232]	1184	ql(nzt,j,i) ) * &
	1185	surf_def_h(2)%shf(m) + &
	1186	0.61_wp * pt(nzt,j,i) * &
	1187	surf_def_h(2)%qsws(m) )&
[2037]	1188	* heatflux_output_conversion(nzt)
[1007]	1189	ENDIF
[3274]	1190	IF ( bulk_cloud_model ) THEN
[19]	1191	!
	1192	!-- Formula does not work if ql(nzb) /= 0.0
	1193	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
[2037]	1194	waterflux_output_conversion(nzt) * &
[2232]	1195	surf_def_h(2)%qsws(m) * rmask(j,i,sr)
[19]	1196	ENDIF
	1197	ENDIF
	1198	IF ( passive_scalar ) THEN
[2270]	1199	sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
[2232]	1200	surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
[19]	1201	ENDIF
[3658]	1202	#endif
[19]	1203	ENDIF
	1204
	1205	!
[1]	1206	!-- Resolved fluxes (can be computed for all horizontal points)
[132]	1207	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	1208	!-- ---- speaking the following k-loop would have to be split up and
	1209	!-- rearranged according to the staggered grid.
[2232]	1210	DO k = nzb, nzt
[4329]	1211	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 22 ) )
[1353]	1212	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1213	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1214	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1215	v(k+1,j,i) - hom(k+1,1,2,sr) )
	1216	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
	1217	pt(k+1,j,i) - hom(k+1,1,4,sr) )
[667]	1218
[1]	1219	!-- Higher moments
[3658]	1220	!$ACC ATOMIC
[1353]	1221	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
[2232]	1222	rmask(j,i,sr) * flag
[3658]	1223	!$ACC ATOMIC
[1353]	1224	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
[2232]	1225	rmask(j,i,sr) * flag
[1]	1226
	1227	!
[96]	1228	!-- Salinity flux and density (density does not belong to here,
[97]	1229	!-- but so far there is no other suitable place to calculate)
[3658]	1230	#ifndef _OPENACC
[3294]	1231	IF ( ocean_mode ) THEN
[1567]	1232	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1233	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
	1234	sa(k+1,j,i) - hom(k+1,1,23,sr) )
	1235	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
[2232]	1236	rmask(j,i,sr) * flag
[667]	1237	ENDIF
[2232]	1238	sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
	1239	rmask(j,i,sr) * flag
[1353]	1240	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
[2232]	1241	rmask(j,i,sr) * flag
[96]	1242	ENDIF
	1243
	1244	!
[1053]	1245	!-- Buoyancy flux, water flux, humidity flux, liquid water
	1246	!-- content, rain drop concentration and rain water content
[75]	1247	IF ( humidity ) THEN
[3274]	1248	IF ( bulk_cloud_model .OR. cloud_droplets ) THEN
[1353]	1249	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
[1007]	1250	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
[1353]	1251	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[4039]	1252	rho_air_zw(k) * &
[2037]	1253	heatflux_output_conversion(k) * &
[2232]	1254	rmask(j,i,sr) * flag
	1255	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
	1256	* flag
[1822]	1257
[1053]	1258	IF ( .NOT. cloud_droplets ) THEN
[1353]	1259	pts = 0.5_wp * &
[1115]	1260	( ( q(k,j,i) - ql(k,j,i) ) - &
	1261	hom(k,1,42,sr) + &
	1262	( q(k+1,j,i) - ql(k+1,j,i) ) - &
[1053]	1263	hom(k+1,1,42,sr) )
[1115]	1264	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
[4039]	1265	rho_air_zw(k) * &
[2037]	1266	waterflux_output_conversion(k) * &
[2232]	1267	rmask(j,i,sr) * &
	1268	flag
[1822]	1269	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
[2232]	1270	rmask(j,i,sr) * &
	1271	flag
[1822]	1272	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
[2232]	1273	rmask(j,i,sr) * &
	1274	flag
[2292]	1275	IF ( microphysics_morrison ) THEN
	1276	sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
	1277	rmask(j,i,sr) *&
	1278	flag
	1279	ENDIF
[1822]	1280	IF ( microphysics_seifert ) THEN
	1281	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
[2232]	1282	rmask(j,i,sr) *&
	1283	flag
[1822]	1284	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
[2232]	1285	rmask(j,i,sr) *&
	1286	flag
[1053]	1287	ENDIF
	1288	ENDIF
[1822]	1289
[1007]	1290	ELSE
[1567]	1291	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1292	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
	1293	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
	1294	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[4039]	1295	rho_air_zw(k) * &
[2037]	1296	heatflux_output_conversion(k) * &
[2232]	1297	rmask(j,i,sr) * &
	1298	flag
[1567]	1299	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[2037]	1300	sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
	1301	hom(k,1,41,sr) ) * &
	1302	sums_l(k,17,tn) + &
	1303	0.61_wp * hom(k,1,4,sr) * &
	1304	sums_l(k,49,tn) &
[2232]	1305	) * heatflux_output_conversion(k) * &
	1306	flag
[1007]	1307	END IF
	1308	END IF
[1]	1309	ENDIF
	1310	!
	1311	!-- Passive scalar flux
[1353]	1312	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
[1567]	1313	.OR. sr /= 0 ) ) THEN
[2270]	1314	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1315	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1316	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1317	rmask(j,i,sr) * flag
[1]	1318	ENDIF
[3658]	1319	#endif
[1]	1320
	1321	!
	1322	!-- Energy flux we
[667]	1323	!-- has to be adjusted
[3658]	1324	!$ACC ATOMIC
[1353]	1325	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
	1326	( ust2 + vst2 + w(k,j,i)**2 ) &
[2674]	1327	* rho_air_zw(k) &
[2037]	1328	* momentumflux_output_conversion(k) &
[2232]	1329	* rmask(j,i,sr) * flag
[1]	1330	ENDDO
	1331	ENDDO
	1332	ENDDO
[2232]	1333	!$OMP END PARALLEL
[3658]	1334
	1335	!$ACC UPDATE &
	1336	!$ACC HOST(sums_l(:,12,tn), sums_l(:,14,tn), sums_l(:,16,tn)) &
	1337	!$ACC HOST(sums_l(:,35,tn), sums_l(:,36,tn), sums_l(:,37,tn))
[709]	1338	!
[2232]	1339	!-- Treat land-surface quantities according to new wall model structure.
	1340	IF ( land_surface ) THEN
	1341	tn = 0
	1342	!$OMP PARALLEL PRIVATE( i, j, m, tn )
	1343	!$ tn = omp_get_thread_num()
	1344	!$OMP DO
	1345	DO m = 1, surf_lsm_h%ns
	1346	i = surf_lsm_h%i(m)
	1347	j = surf_lsm_h%j(m)
	1348
	1349	IF ( i >= nxl .AND. i <= nxr .AND. &
	1350	j >= nys .AND. j <= nyn ) THEN
[2270]	1351	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
	1352	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
	1353	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
	1354	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
	1355	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
	1356	sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
[2232]	1357	ENDIF
	1358	ENDDO
	1359	!$OMP END PARALLEL
	1360
	1361	tn = 0
	1362	!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
	1363	!$ tn = omp_get_thread_num()
	1364	!$OMP DO
	1365	DO m = 1, surf_lsm_h%ns
	1366
	1367	i = surf_lsm_h%i(m)
	1368	j = surf_lsm_h%j(m)
	1369
	1370	IF ( i >= nxl .AND. i <= nxr .AND. &
	1371	j >= nys .AND. j <= nyn ) THEN
	1372
	1373	DO k = nzb_soil, nzt_soil
	1374	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
	1375	* rmask(j,i,sr)
	1376	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
	1377	* rmask(j,i,sr)
	1378	ENDDO
	1379	ENDIF
	1380	ENDDO
	1381	!$OMP END PARALLEL
	1382	ENDIF
	1383	!
[709]	1384	!-- For speed optimization fluxes which have been computed in part directly
	1385	!-- inside the WS advection routines are treated seperatly
	1386	!-- Momentum fluxes first:
[2232]	1387
	1388	tn = 0
	1389	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	1390	!$ tn = omp_get_thread_num()
[743]	1391	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
[2232]	1392	!$OMP DO
	1393	DO i = nxl, nxr
	1394	DO j = nys, nyn
	1395	DO k = nzb, nzt
[1007]	1396	!
[2232]	1397	!-- Flag 23 is used to mask surface fluxes as well as model-top
	1398	!-- fluxes, which are added further below.
	1399	flag = MERGE( 1.0_wp, 0.0_wp, &
[4329]	1400	BTEST( wall_flags_static_0(k,j,i), 23 ) ) * &
[2232]	1401	MERGE( 1.0_wp, 0.0_wp, &
[4329]	1402	BTEST( wall_flags_static_0(k,j,i), 9 ) )
[2232]	1403
	1404	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1405	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1406	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1407	v(k+1,j,i) - hom(k+1,1,2,sr) )
[667]	1408	!
[2232]	1409	!-- Momentum flux wu
	1410	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
	1411	( w(k,j,i-1) + w(k,j,i) ) &
[2674]	1412	* rho_air_zw(k) &
[2232]	1413	* momentumflux_output_conversion(k) &
	1414	* ust * rmask(j,i,sr) &
	1415	* flag
	1416	!
	1417	!-- Momentum flux wv
	1418	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
	1419	( w(k,j-1,i) + w(k,j,i) ) &
[2674]	1420	* rho_air_zw(k) &
[2232]	1421	* momentumflux_output_conversion(k) &
	1422	* vst * rmask(j,i,sr) &
	1423	* flag
	1424	ENDDO
	1425	ENDDO
	1426	ENDDO
[1]	1427
[667]	1428	ENDIF
[1567]	1429	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[2232]	1430	!$OMP DO
	1431	DO i = nxl, nxr
	1432	DO j = nys, nyn
	1433	DO k = nzb, nzt
	1434	flag = MERGE( 1.0_wp, 0.0_wp, &
[4329]	1435	BTEST( wall_flags_static_0(k,j,i), 23 ) ) * &
[2232]	1436	MERGE( 1.0_wp, 0.0_wp, &
[4329]	1437	BTEST( wall_flags_static_0(k,j,i), 9 ) )
[709]	1438	!
[2232]	1439	!-- Vertical heat flux
	1440	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
[1353]	1441	( pt(k,j,i) - hom(k,1,4,sr) + &
	1442	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
[4039]	1443	* rho_air_zw(k) &
[2037]	1444	* heatflux_output_conversion(k) &
[2232]	1445	* w(k,j,i) * rmask(j,i,sr) * flag
	1446	IF ( humidity ) THEN
	1447	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
[1353]	1448	q(k+1,j,i) - hom(k+1,1,41,sr) )
[2232]	1449	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
[4039]	1450	rho_air_zw(k) * &
[2037]	1451	waterflux_output_conversion(k) * &
[2232]	1452	rmask(j,i,sr) * flag
	1453	ENDIF
	1454	IF ( passive_scalar ) THEN
[2270]	1455	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1456	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1457	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1458	rmask(j,i,sr) * flag
	1459	ENDIF
	1460	ENDDO
	1461	ENDDO
	1462	ENDDO
[667]	1463
	1464	ENDIF
	1465
[1]	1466	!
[97]	1467	!-- Density at top follows Neumann condition
[3294]	1468	IF ( ocean_mode ) THEN
[388]	1469	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
	1470	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
	1471	ENDIF
[97]	1472
	1473	!
[1]	1474	!-- Divergence of vertical flux of resolved scale energy and pressure
[106]	1475	!-- fluctuations as well as flux of pressure fluctuation itself (68).
	1476	!-- First calculate the products, then the divergence.
[1]	1477	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
[1691]	1478	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
	1479	THEN
[1353]	1480	sums_ll = 0.0_wp ! local array
[1]	1481
	1482	!$OMP DO
	1483	DO i = nxl, nxr
	1484	DO j = nys, nyn
[2232]	1485	DO k = nzb+1, nzt
[4329]	1486	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 0 ) )
[1]	1487
[1353]	1488	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
[1652]	1489	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
	1490	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
	1491	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
[1654]	1492	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
[2232]	1493	+ w(k,j,i)*2 ) flag
[1]	1494
[1353]	1495	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
[2252]	1496	* ( ( p(k,j,i) + p(k+1,j,i) ) &
	1497	/ momentumflux_output_conversion(k) ) &
	1498	* flag
[1]	1499
	1500	ENDDO
	1501	ENDDO
	1502	ENDDO
[1353]	1503	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
	1504	sums_ll(nzt+1,1) = 0.0_wp
	1505	sums_ll(0,2) = 0.0_wp
	1506	sums_ll(nzt+1,2) = 0.0_wp
[1]	1507
[678]	1508	DO k = nzb+1, nzt
[1]	1509	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
	1510	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
[106]	1511	sums_l(k,68,tn) = sums_ll(k,2)
[1]	1512	ENDDO
	1513	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
	1514	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
[1353]	1515	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
[1]	1516
	1517	ENDIF
	1518
	1519	!
[106]	1520	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
[1691]	1521	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
	1522	THEN
[1]	1523	!$OMP DO
	1524	DO i = nxl, nxr
	1525	DO j = nys, nyn
[2232]	1526	DO k = nzb+1, nzt
[1]	1527
[4329]	1528	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 0 ) )
[2232]	1529
[1353]	1530	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
[1]	1531	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
	1532	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
[2232]	1533	) * ddzw(k) &
	1534	* flag
[1]	1535
[1353]	1536	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
[106]	1537	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
[2232]	1538	) * flag
[106]	1539
[1]	1540	ENDDO
	1541	ENDDO
	1542	ENDDO
	1543	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
[106]	1544	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
[1]	1545
	1546	ENDIF
	1547
	1548	!
	1549	!-- Horizontal heat fluxes (subgrid, resolved, total).
	1550	!-- Do it only, if profiles shall be plotted.
[1353]	1551	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
[1]	1552
	1553	!$OMP DO
	1554	DO i = nxl, nxr
	1555	DO j = nys, nyn
[2232]	1556	DO k = nzb+1, nzt
[4329]	1557	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 0 ) )
[1]	1558	!
	1559	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
[1353]	1560	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
[1]	1561	( kh(k,j,i) + kh(k,j,i-1) ) &
	1562	* ( pt(k,j,i-1) - pt(k,j,i) ) &
[2037]	1563	* rho_air_zw(k) &
	1564	* heatflux_output_conversion(k) &
[2232]	1565	* ddx * rmask(j,i,sr) * flag
[1353]	1566	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
[1]	1567	( kh(k,j,i) + kh(k,j-1,i) ) &
	1568	* ( pt(k,j-1,i) - pt(k,j,i) ) &
[2037]	1569	* rho_air_zw(k) &
	1570	* heatflux_output_conversion(k) &
[2232]	1571	* ddy * rmask(j,i,sr) * flag
[1]	1572	!
	1573	!-- Resolved horizontal heat fluxes upt, vpt
	1574	sums_l(k,59,tn) = sums_l(k,59,tn) + &
	1575	( u(k,j,i) - hom(k,1,1,sr) ) &
[1353]	1576	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
[2037]	1577	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1578	* heatflux_output_conversion(k) &
	1579	* flag
[1353]	1580	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
	1581	pt(k,j,i) - hom(k,1,4,sr) )
[1]	1582	sums_l(k,62,tn) = sums_l(k,62,tn) + &
	1583	( v(k,j,i) - hom(k,1,2,sr) ) &
[1353]	1584	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
[2037]	1585	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1586	* heatflux_output_conversion(k) &
	1587	* flag
[1]	1588	ENDDO
	1589	ENDDO
	1590	ENDDO
	1591	!
	1592	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
[1353]	1593	sums_l(nzb,58,tn) = 0.0_wp
	1594	sums_l(nzb,59,tn) = 0.0_wp
	1595	sums_l(nzb,60,tn) = 0.0_wp
	1596	sums_l(nzb,61,tn) = 0.0_wp
	1597	sums_l(nzb,62,tn) = 0.0_wp
	1598	sums_l(nzb,63,tn) = 0.0_wp
[1]	1599
	1600	ENDIF
[2073]	1601	!$OMP END PARALLEL
[87]	1602
	1603	!
[1365]	1604	!-- Collect current large scale advection and subsidence tendencies for
	1605	!-- data output
[1691]	1606	IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
[1365]	1607	!
	1608	!-- Interpolation in time of LSF_DATA
	1609	nt = 1
[1386]	1610	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
[1365]	1611	nt = nt + 1
	1612	ENDDO
[1386]	1613	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
[1365]	1614	nt = nt - 1
	1615	ENDIF
	1616
[1386]	1617	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
[1365]	1618	/ ( time_vert(nt+1)-time_vert(nt) )
	1619
	1620
	1621	DO k = nzb, nzt
[1382]	1622	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
	1623	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
	1624	sums_ls_l(k,1) = td_lsa_q(k,nt) &
	1625	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
[1365]	1626	ENDDO
	1627
[1382]	1628	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
	1629	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
	1630
[1365]	1631	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
	1632
	1633	DO k = nzb, nzt
[1382]	1634	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
	1635	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
	1636	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
	1637	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
[1365]	1638	ENDDO
	1639
[1382]	1640	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
	1641	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
	1642
[1365]	1643	ENDIF
	1644
	1645	ENDIF
	1646
[2232]	1647	tn = 0
[2073]	1648	!$OMP PARALLEL PRIVATE( i, j, k, tn )
[2232]	1649	!$ tn = omp_get_thread_num()
[1585]	1650	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
	1651	!$OMP DO
	1652	DO i = nxl, nxr
	1653	DO j = nys, nyn
[2232]	1654	DO k = nzb+1, nzt+1
[4329]	1655	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_static_0(k,j,i), 0 ) )
[2232]	1656
[2270]	1657	sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
[2232]	1658	* rmask(j,i,sr) * flag
[2270]	1659	sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
[2232]	1660	* rmask(j,i,sr) * flag
[2270]	1661	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
[2232]	1662	* rmask(j,i,sr) * flag
[2270]	1663	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
[2232]	1664	* rmask(j,i,sr) * flag
[2270]	1665	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
[2232]	1666	* rmask(j,i,sr) * flag
[2270]	1667	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
[2232]	1668	* rmask(j,i,sr) * flag
[2270]	1669	sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
[2232]	1670	* rmask(j,i,sr) * flag
[2270]	1671	sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
[2232]	1672	* rmask(j,i,sr) * flag
[1585]	1673	ENDDO
	1674	ENDDO
	1675	ENDDO
	1676	ENDIF
[3637]	1677
[1365]	1678	!
[3637]	1679	!-- Calculate the profiles for all other modules
	1680	CALL module_interface_statistics( 'profiles', sr, tn, dots_max )
[3651]	1681	!$OMP END PARALLEL
[1]	1682
	1683	!
	1684	!-- Summation of thread sums
	1685	IF ( threads_per_task > 1 ) THEN
	1686	DO i = 1, threads_per_task-1
	1687	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
	1688	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
[87]	1689	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
	1690	sums_l(:,45:pr_palm,i)
	1691	IF ( max_pr_user > 0 ) THEN
	1692	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
	1693	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
	1694	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
	1695	ENDIF
[3298]	1696
	1697	IF ( air_chemistry ) THEN
	1698	IF ( max_pr_cs > 0 ) THEN
	1699	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+ max_pr_cs,0) = &
	1700	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,0) + &
	1701	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,i)
	1702
	1703	ENDIF
	1704	ENDIF
[4131]	1705	IF ( salsa ) THEN
	1706	IF ( max_pr_cs > 0 ) THEN
	1707	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) = &
	1708	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) + &
	1709	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,i)
	1710
	1711	ENDIF
	1712	ENDIF
[1]	1713	ENDDO
	1714	ENDIF
	1715
	1716	#if defined( __parallel )
[667]	1717
[1]	1718	!
	1719	!-- Compute total sum from local sums
[622]	1720	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1365]	1721	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
[1]	1722	MPI_SUM, comm2d, ierr )
[1365]	1723	IF ( large_scale_forcing ) THEN
	1724	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
	1725	MPI_REAL, MPI_SUM, comm2d, ierr )
	1726	ENDIF
[3298]	1727
[3458]	1728	IF ( air_chemistry .AND. max_pr_cs > 0 ) THEN
[3298]	1729	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[3458]	1730	DO i = 1, max_pr_cs
	1731	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+i,0), &
	1732	sums(nzb,pr_palm+max_pr_user+i), &
	1733	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
	1734	ENDDO
[3298]	1735	ENDIF
	1736
[4131]	1737	IF ( salsa .AND. max_pr_salsa > 0 ) THEN
	1738	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
	1739	DO i = 1, max_pr_salsa
	1740	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+max_pr_cs+i,0), &
	1741	sums(nzb,pr_palm+max_pr_user+max_pr_user+i), &
	1742	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
	1743	ENDDO
	1744	ENDIF
	1745
[1]	1746	#else
	1747	sums = sums_l(:,:,0)
[1365]	1748	IF ( large_scale_forcing ) THEN
	1749	sums(:,81:88) = sums_ls_l
	1750	ENDIF
[1]	1751	#endif
	1752
	1753	!
	1754	!-- Final values are obtained by division by the total number of grid points
	1755	!-- used for summation. After that store profiles.
[1738]	1756	!-- Check, if statistical regions do contain at least one grid point at the
	1757	!-- respective k-level, otherwise division by zero will lead to undefined
	1758	!-- values, which may cause e.g. problems with NetCDF output
[1]	1759	!-- Profiles:
	1760	DO k = nzb, nzt+1
[1738]	1761	sums(k,3) = sums(k,3) / ngp_2dh(sr)
	1762	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
	1763	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
	1764	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
	1765	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
	1766	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
	1767	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
[2270]	1768	sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
	1769	sums(k,114) = sums(k,114) / ngp_2dh(sr)
	1770	sums(k,117) = sums(k,117) / ngp_2dh(sr)
[1738]	1771	IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
	1772	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
	1773	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
	1774	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
	1775	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
	1776	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
	1777	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
	1778	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
[2270]	1779	sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
	1780	sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
[3452]	1781	sums(k,123) = sums(k,123) * ngp_2dh_s_inner(k,sr) / ngp_2dh(sr)
[1738]	1782	ENDIF
[1]	1783	ENDDO
[667]	1784
[1]	1785	!-- u* and so on
[87]	1786	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
[1]	1787	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
	1788	!-- above the topography, they are being divided by ngp_2dh(sr)
[87]	1789	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
[1]	1790	ngp_2dh(sr)
[197]	1791	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
	1792	ngp_2dh(sr)
[1960]	1793	sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
	1794	ngp_2dh(sr)
[2773]	1795	sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
	1796	ngp_2dh(sr)
[1]	1797	!-- eges, e*
[87]	1798	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
[132]	1799	ngp_3d(sr)
[1]	1800	!-- Old and new divergence
[87]	1801	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
[1]	1802	ngp_3d_inner(sr)
	1803
[87]	1804	!-- User-defined profiles
	1805	IF ( max_pr_user > 0 ) THEN
	1806	DO k = nzb, nzt+1
	1807	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
	1808	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
[132]	1809	ngp_2dh_s_inner(k,sr)
[87]	1810	ENDDO
	1811	ENDIF
[1007]	1812
[3298]	1813	IF ( air_chemistry ) THEN
	1814	IF ( max_pr_cs > 0 ) THEN
	1815	DO k = nzb, nzt+1
	1816	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) = &
	1817	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) / &
	1818	ngp_2dh_s_inner(k,sr)
	1819	ENDDO
	1820	ENDIF
	1821	ENDIF
	1822
[4131]	1823	IF ( salsa ) THEN
	1824	IF ( max_pr_salsa > 0 ) THEN
	1825	DO k = nzb, nzt+1
	1826	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) = &
	1827	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) &
	1828	/ ngp_2dh_s_inner(k,sr)
	1829	ENDDO
	1830	ENDIF
	1831	ENDIF
	1832
[1]	1833	!
	1834	!-- Collect horizontal average in hom.
	1835	!-- Compute deduced averages (e.g. total heat flux)
	1836	hom(:,1,3,sr) = sums(:,3) ! w
	1837	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
	1838	hom(:,1,9,sr) = sums(:,9) ! km
	1839	hom(:,1,10,sr) = sums(:,10) ! kh
	1840	hom(:,1,11,sr) = sums(:,11) ! l
	1841	hom(:,1,12,sr) = sums(:,12) ! w"u"
	1842	hom(:,1,13,sr) = sums(:,13) ! wu
	1843	hom(:,1,14,sr) = sums(:,14) ! w"v"
	1844	hom(:,1,15,sr) = sums(:,15) ! wv
	1845	hom(:,1,16,sr) = sums(:,16) ! w"pt"
	1846	hom(:,1,17,sr) = sums(:,17) ! wpt
	1847	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
	1848	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
	1849	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
	1850	hom(:,1,21,sr) = sums(:,21) ! wptBC
	1851	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
[96]	1852	! profile 24 is initial profile (sa)
	1853	! profiles 25-29 left empty for initial
[1]	1854	! profiles
	1855	hom(:,1,30,sr) = sums(:,30) ! u*2
	1856	hom(:,1,31,sr) = sums(:,31) ! v*2
	1857	hom(:,1,32,sr) = sums(:,32) ! w*2
	1858	hom(:,1,33,sr) = sums(:,33) ! pt*2
	1859	hom(:,1,34,sr) = sums(:,34) ! e*
	1860	hom(:,1,35,sr) = sums(:,35) ! w2pt
	1861	hom(:,1,36,sr) = sums(:,36) ! wpt2
	1862	hom(:,1,37,sr) = sums(:,37) ! we
	1863	hom(:,1,38,sr) = sums(:,38) ! w*3
[1353]	1864	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
[1]	1865	hom(:,1,40,sr) = sums(:,40) ! p
[531]	1866	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
[1]	1867	hom(:,1,46,sr) = sums(:,46) ! wvpt
	1868	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
	1869	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
	1870	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
	1871	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
	1872	hom(:,1,51,sr) = sums(:,51) ! w"qv"
	1873	hom(:,1,52,sr) = sums(:,52) ! wqv
	1874	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
	1875	hom(:,1,54,sr) = sums(:,54) ! ql
	1876	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
	1877	hom(:,1,56,sr) = sums(:,56) ! wp/dz
[2031]	1878	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
[1]	1879	hom(:,1,58,sr) = sums(:,58) ! u"pt"
	1880	hom(:,1,59,sr) = sums(:,59) ! upt
	1881	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
	1882	hom(:,1,61,sr) = sums(:,61) ! v"pt"
	1883	hom(:,1,62,sr) = sums(:,62) ! vpt
	1884	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
[2031]	1885	hom(:,1,64,sr) = sums(:,64) ! rho_ocean
[96]	1886	hom(:,1,65,sr) = sums(:,65) ! w"sa"
	1887	hom(:,1,66,sr) = sums(:,66) ! wsa
	1888	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
[106]	1889	hom(:,1,68,sr) = sums(:,68) ! wp
[2031]	1890	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
[197]	1891	hom(:,1,70,sr) = sums(:,70) ! q*2
[388]	1892	hom(:,1,71,sr) = sums(:,71) ! prho
[2252]	1893	hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
[2292]	1894	hom(:,1,123,sr) = sums(:,123) ! nc
[1053]	1895	hom(:,1,73,sr) = sums(:,73) ! nr
	1896	hom(:,1,74,sr) = sums(:,74) ! qr
	1897	hom(:,1,75,sr) = sums(:,75) ! qc
	1898	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
[1179]	1899	! 77 is initial density profile
[1241]	1900	hom(:,1,78,sr) = ug ! ug
	1901	hom(:,1,79,sr) = vg ! vg
[1299]	1902	hom(:,1,80,sr) = w_subs ! w_subs
[1]	1903
[1365]	1904	IF ( large_scale_forcing ) THEN
[1382]	1905	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
	1906	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
[1365]	1907	IF ( use_subsidence_tendencies ) THEN
[1382]	1908	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
	1909	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
[1365]	1910	ELSE
[1382]	1911	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
	1912	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
[1365]	1913	ENDIF
[1382]	1914	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
	1915	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
	1916	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
	1917	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
[1365]	1918	ENDIF
	1919
[1551]	1920	IF ( land_surface ) THEN
	1921	hom(:,1,89,sr) = sums(:,89) ! t_soil
	1922	! 90 is initial t_soil profile
	1923	hom(:,1,91,sr) = sums(:,91) ! m_soil
	1924	! 92 is initial m_soil profile
[2270]	1925	hom(:,1,93,sr) = sums(:,93) ! ghf
	1926	hom(:,1,94,sr) = sums(:,94) ! qsws_liq
	1927	hom(:,1,95,sr) = sums(:,95) ! qsws_soil
	1928	hom(:,1,96,sr) = sums(:,96) ! qsws_veg
	1929	hom(:,1,97,sr) = sums(:,97) ! r_a
	1930	hom(:,1,98,sr) = sums(:,98) ! r_s
[1555]	1931
[1551]	1932	ENDIF
	1933
	1934	IF ( radiation ) THEN
[2270]	1935	hom(:,1,99,sr) = sums(:,99) ! rad_net
	1936	hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
	1937	hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
	1938	hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
	1939	hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
[1585]	1940
[1691]	1941	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	1942	hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
	1943	hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
	1944	hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
	1945	hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
[1691]	1946
[2270]	1947	hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
	1948	hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
	1949	hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
	1950	hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
[1585]	1951	ENDIF
[1551]	1952	ENDIF
	1953
[2270]	1954	hom(:,1,112,sr) = sums(:,112) !: L
[1691]	1955
[1960]	1956	IF ( passive_scalar ) THEN
[2270]	1957	hom(:,1,117,sr) = sums(:,117) ! w"s"
	1958	hom(:,1,114,sr) = sums(:,114) ! ws
	1959	hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
	1960	hom(:,1,116,sr) = sums(:,116) ! s*2
[1960]	1961	ENDIF
	1962
[2270]	1963	hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
	1964	hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
[2037]	1965
[667]	1966	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
[1]	1967	! u, w'u', w'v', t (in last profile)
	1968
[87]	1969	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
	1970	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
	1971	sums(:,pr_palm+1:pr_palm+max_pr_user)
	1972	ENDIF
	1973
[3298]	1974	IF ( air_chemistry ) THEN
	1975	IF ( max_pr_cs > 0 ) THEN ! chem_spcs profiles
	1976	hom(:, 1, pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs, sr) = &
	1977	sums(:, pr_palm+max_pr_user+1:pr_palm+max_pr_user+max_pr_cs)
	1978	ENDIF
	1979	ENDIF
[4131]	1980
	1981	IF ( salsa ) THEN
	1982	IF ( max_pr_salsa > 0 ) THEN ! salsa profiles
	1983	hom(:,1,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa, sr) = &
	1984	sums(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa)
	1985	ENDIF
	1986	ENDIF
[1]	1987	!
	1988	!-- Determine the boundary layer height using two different schemes.
[94]	1989	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
	1990	!-- first relative minimum (maximum) of the total heat flux.
	1991	!-- The corresponding height is assumed as the boundary layer height, if it
	1992	!-- is less than 1.5 times the height where the heat flux becomes negative
[3004]	1993	!-- (positive) for the first time. Attention: the resolved vertical sensible
	1994	!-- heat flux (hom(:,1,17,sr) = wpt) is not known at the beginning because
	1995	!-- the calculation happens in advec_s_ws which is called after
	1996	!-- flow_statistics. Therefore z_i is directly taken from restart data at
	1997	!-- the beginning of restart runs.
[3003]	1998	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .OR. &
	1999	simulated_time_at_begin /= simulated_time ) THEN
[667]	2000
[3003]	2001	z_i(1) = 0.0_wp
	2002	first = .TRUE.
	2003
[3294]	2004	IF ( ocean_mode ) THEN
[3003]	2005	DO k = nzt, nzb+1, -1
	2006	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2007	first = .FALSE.
	2008	height = zw(k)
[97]	2009	ENDIF
[3003]	2010	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2011	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2012	IF ( zw(k) < 1.5_wp * height ) THEN
	2013	z_i(1) = zw(k)
	2014	ELSE
	2015	z_i(1) = height
	2016	ENDIF
	2017	EXIT
[94]	2018	ENDIF
[3003]	2019	ENDDO
	2020	ELSE
	2021	DO k = nzb, nzt-1
	2022	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2023	first = .FALSE.
	2024	height = zw(k)
	2025	ENDIF
	2026	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2027	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2028	IF ( zw(k) < 1.5_wp * height ) THEN
	2029	z_i(1) = zw(k)
	2030	ELSE
	2031	z_i(1) = height
	2032	ENDIF
	2033	EXIT
	2034	ENDIF
	2035	ENDDO
	2036	ENDIF
[1]	2037
	2038	!
[3003]	2039	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
	2040	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
	2041	!-- maximal local temperature gradient: starting from the second (the
	2042	!-- last but one) vertical gridpoint, the local gradient must be at least
	2043	!-- 0.2K/100m and greater than the next four gradients.
	2044	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
	2045	!-- ocean case!
	2046	z_i(2) = 0.0_wp
	2047	DO k = nzb+1, nzt+1
	2048	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
	2049	ENDDO
	2050	dptdz_threshold = 0.2_wp / 100.0_wp
[291]	2051
[3294]	2052	IF ( ocean_mode ) THEN
[3003]	2053	DO k = nzt+1, nzb+5, -1
	2054	IF ( dptdz(k) > dptdz_threshold .AND. &
	2055	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND.&
	2056	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
	2057	z_i(2) = zw(k-1)
	2058	EXIT
	2059	ENDIF
	2060	ENDDO
	2061	ELSE
	2062	DO k = nzb+1, nzt-3
	2063	IF ( dptdz(k) > dptdz_threshold .AND. &
	2064	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND.&
	2065	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
	2066	z_i(2) = zw(k-1)
	2067	EXIT
	2068	ENDIF
	2069	ENDDO
	2070	ENDIF
	2071
[97]	2072	ENDIF
[1]	2073
[87]	2074	hom(nzb+6,1,pr_palm,sr) = z_i(1)
	2075	hom(nzb+7,1,pr_palm,sr) = z_i(2)
[1]	2076
	2077	!
[1738]	2078	!-- Determine vertical index which is nearest to the mean surface level
	2079	!-- height of the respective statistic region
	2080	DO k = nzb, nzt
	2081	IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
	2082	k_surface_level = k
	2083	EXIT
	2084	ENDIF
	2085	ENDDO
[3003]	2086
[1738]	2087	!
[1]	2088	!-- Computation of both the characteristic vertical velocity and
	2089	!-- the characteristic convective boundary layer temperature.
[1738]	2090	!-- The inversion height entering into the equation is defined with respect
	2091	!-- to the mean surface level height of the respective statistic region.
	2092	!-- The horizontal average at surface level index + 1 is input for the
	2093	!-- average temperature.
	2094	IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
	2095	THEN
[2252]	2096	hom(nzb+8,1,pr_palm,sr) = &
[2037]	2097	( g / hom(k_surface_level+1,1,4,sr) * &
[2252]	2098	( hom(k_surface_level,1,18,sr) / &
	2099	( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
[1738]	2100	* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
[1]	2101	ELSE
[1353]	2102	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
[1]	2103	ENDIF
	2104
[48]	2105	!
[2968]	2106	!-- Collect the time series quantities. Please note, timeseries quantities
	2107	!-- which are collected from horizontally averaged profiles, e.g. wpt
	2108	!-- or pt(zp), are treated specially. In case of elevated model surfaces,
	2109	!-- index nzb+1 might be within topography and data will be zero. Therefore,
	2110	!-- take value for the first atmosphere index, which is topo_min_level+1.
	2111	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
	2112	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
[48]	2113	ts_value(3,sr) = dt_3d
[2968]	2114	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
	2115	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
[48]	2116	ts_value(6,sr) = u_max
	2117	ts_value(7,sr) = v_max
	2118	ts_value(8,sr) = w_max
[2968]	2119	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
	2120	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
	2121	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
	2122	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
	2123	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
	2124	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
	2125	ts_value(15,sr) = hom(topo_min_level+1,1,16,sr) ! w'pt' at k=1
	2126	ts_value(16,sr) = hom(topo_min_level+1,1,18,sr) ! wpt at k=1
	2127	ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
	2128	ts_value(18,sr) = hom(topo_min_level+1,1,4,sr) ! pt(zp)
	2129	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
	2130	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
	2131	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
[1709]	2132
	2133	IF ( .NOT. neutral ) THEN
[2270]	2134	ts_value(22,sr) = hom(nzb,1,112,sr) ! L
[48]	2135	ELSE
[1709]	2136	ts_value(22,sr) = 1.0E10_wp
[48]	2137	ENDIF
[1]	2138
[343]	2139	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
[1551]	2140
[1960]	2141	IF ( passive_scalar ) THEN
[2270]	2142	ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
[1960]	2143	ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
	2144	ENDIF
	2145
[1]	2146	!
[1551]	2147	!-- Collect land surface model timeseries
	2148	IF ( land_surface ) THEN
[2270]	2149	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
	2150	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
	2151	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
	2152	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
	2153	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
	2154	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
[1551]	2155	ENDIF
	2156	!
	2157	!-- Collect radiation model timeseries
	2158	IF ( radiation ) THEN
[2270]	2159	ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
	2160	ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
	2161	ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
	2162	ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
	2163	ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
[1585]	2164
	2165	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	2166	ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
	2167	ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
	2168	ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
	2169	ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
[1585]	2170	ENDIF
	2171
[1551]	2172	ENDIF
	2173
	2174	!
[3637]	2175	!-- Calculate additional statistics provided by other modules
	2176	CALL module_interface_statistics( 'time_series', sr, 0, dots_max )
[2817]	2177
[48]	2178	ENDDO ! loop of the subregions
	2179
[1]	2180	!
[1918]	2181	!-- If required, sum up horizontal averages for subsequent time averaging.
	2182	!-- Do not sum, if flow statistics is called before the first initial time step.
	2183	IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
[1353]	2184	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
[1]	2185	hom_sum = hom_sum + hom(:,1,:,:)
	2186	average_count_pr = average_count_pr + 1
	2187	do_sum = .FALSE.
	2188	ENDIF
	2189
	2190	!
	2191	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
	2192	!-- This flag is reset after each time step in time_integration.
	2193	flow_statistics_called = .TRUE.
	2194
	2195	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
	2196
	2197
	2198	END SUBROUTINE flow_statistics

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |