Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 4245

Last change on this file since 4245 was 4182, checked in by scharf, 5 years ago
corrected "Former revisions" section minor formatting in "Former revisions" section added "Author" section
Property svn:keywords set to `Id`
File size: 105.8 KB

Rev	Line
[1682]	1	!> @file flow_statistics.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[3651]	17	! Copyright 1997-2019 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[3298]	21	! ------------------
[1961]	22	!
[3042]	23	!
[1739]	24	! Former revisions:
	25	! -----------------
	26	! $Id: flow_statistics.f90 4182 2019-08-22 15:20:23Z pavelkrc $
[4182]	27	! Corrected "Former revisions" section
	28	!
	29	! 4131 2019-08-02 11:06:18Z monakurppa
[4131]	30	! Allow profile output for salsa variables.
	31	!
	32	! 4039 2019-06-18 10:32:41Z suehring
[4039]	33	! Correct conversion to kinematic scalar fluxes in case of pw-scheme and
	34	! statistic regions
	35	!
	36	! 3828 2019-03-27 19:36:23Z raasch
[3828]	37	! unused variables removed
	38	!
	39	! 3676 2019-01-16 15:07:05Z knoop
[3651]	40	! Bugfix, terminate OMP Parallel block
[3298]	41	!
[4182]	42	! Revision 1.1 1997/08/11 06:15:17 raasch
	43	! Initial revision
	44	!
	45	!
[1]	46	! Description:
	47	! ------------
[1682]	48	!> Compute average profiles and further average flow quantities for the different
	49	!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
	50	!>
	51	!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
	52	!> lower vertical index for k-loops for all variables, although strictly
	53	!> speaking the k-loops would have to be split up according to the staggered
	54	!> grid. However, this implies no error since staggered velocity components
	55	!> are zero at the walls and inside buildings.
[1]	56	!------------------------------------------------------------------------------!
[1682]	57	SUBROUTINE flow_statistics
[1]	58
[3298]	59
[1320]	60	USE arrays_3d, &
[2037]	61	ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
[2292]	62	momentumflux_output_conversion, nc, nr, p, prho, prr, pt, q, &
[2232]	63	qc, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
[3274]	64	sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, &
	65	zw, d_exner
[3298]	66
[3274]	67	USE basic_constants_and_equations_mod, &
[3298]	68	ONLY: g, lv_d_cp
	69
[3637]	70	USE bulk_cloud_model_mod, &
	71	ONLY: bulk_cloud_model, microphysics_morrison, microphysics_seifert
[3298]	72
	73	USE chem_modules, &
	74	ONLY: max_pr_cs
	75
[1320]	76	USE control_parameters, &
[3298]	77	ONLY: air_chemistry, average_count_pr, cloud_droplets, do_sum, &
[3274]	78	dt_3d, humidity, initializing_actions, land_surface, &
[3003]	79	large_scale_forcing, large_scale_subsidence, max_pr_user, &
[3294]	80	message_string, neutral, ocean_mode, passive_scalar, &
	81	simulated_time, simulated_time_at_begin, &
	82	use_subsidence_tendencies, use_surface_fluxes, use_top_fluxes, &
[4131]	83	ws_scheme_mom, ws_scheme_sca, salsa, max_pr_salsa
[3298]	84
[1320]	85	USE cpulog, &
[1551]	86	ONLY: cpu_log, log_point
[3298]	87
[1320]	88	USE grid_variables, &
[1551]	89	ONLY: ddx, ddy
[1320]	90
	91	USE indices, &
[1551]	92	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, ngp_sums, &
[2968]	93	ngp_sums_ls, nxl, nxr, nyn, nys, nzb, nzt, topo_min_level, &
	94	wall_flags_0
[1320]	95
	96	USE kinds
	97
[1551]	98	USE land_surface_model_mod, &
[2232]	99	ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
[1551]	100
[2320]	101	USE lsf_nudging_mod, &
	102	ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
	103
[3637]	104	USE module_interface, &
	105	ONLY: module_interface_statistics
	106
[1783]	107	USE netcdf_interface, &
[2817]	108	ONLY: dots_rad, dots_soil, dots_max
[1783]	109
[1]	110	USE pegrid
[1551]	111
	112	USE radiation_model_mod, &
[2696]	113	ONLY: radiation, radiation_scheme, &
[1691]	114	rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
	115	rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
[1585]	116
[1]	117	USE statistics
	118
[3828]	119	USE surface_mod, &
	120	ONLY : surf_def_h, surf_lsm_h, surf_usm_h
[1691]	121
[2232]	122
[1]	123	IMPLICIT NONE
	124
[1682]	125	INTEGER(iwp) :: i !<
	126	INTEGER(iwp) :: j !<
	127	INTEGER(iwp) :: k !<
[2232]	128	INTEGER(iwp) :: ki !<
[1738]	129	INTEGER(iwp) :: k_surface_level !<
[2232]	130	INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
	131	INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
[1682]	132	INTEGER(iwp) :: nt !<
[3241]	133	!$ INTEGER(iwp) :: omp_get_thread_num !<
[1682]	134	INTEGER(iwp) :: sr !<
	135	INTEGER(iwp) :: tn !<
[2232]	136
[1682]	137	LOGICAL :: first !<
[1320]	138
[1682]	139	REAL(wp) :: dptdz_threshold !<
	140	REAL(wp) :: fac !<
[2232]	141	REAL(wp) :: flag !<
[1682]	142	REAL(wp) :: height !<
	143	REAL(wp) :: pts !<
	144	REAL(wp) :: sums_l_etot !<
	145	REAL(wp) :: ust !<
	146	REAL(wp) :: ust2 !<
	147	REAL(wp) :: u2 !<
	148	REAL(wp) :: vst !<
	149	REAL(wp) :: vst2 !<
	150	REAL(wp) :: v2 !<
	151	REAL(wp) :: w2 !<
[1320]	152
[1682]	153	REAL(wp) :: dptdz(nzb+1:nzt+1) !<
	154	REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
[1]	155
	156	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
	157
[1221]	158
[1]	159	!
	160	!-- To be on the safe side, check whether flow_statistics has already been
	161	!-- called once after the current time step
	162	IF ( flow_statistics_called ) THEN
[254]	163
[274]	164	message_string = 'flow_statistics is called two times within one ' // &
	165	'timestep'
[254]	166	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
[1007]	167
[1]	168	ENDIF
	169
	170	!
	171	!-- Compute statistics for each (sub-)region
	172	DO sr = 0, statistic_regions
	173
	174	!
	175	!-- Initialize (local) summation array
[1353]	176	sums_l = 0.0_wp
[3658]	177	#ifdef _OPENACC
	178	!$ACC KERNELS PRESENT(sums_l)
	179	sums_l = 0.0_wp
	180	!$ACC END KERNELS
	181	#endif
[1]	182
	183	!
	184	!-- Store sums that have been computed in other subroutines in summation
	185	!-- array
	186	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
	187	!-- WARNING: next line still has to be adjusted for OpenMP
[2037]	188	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
	189	heatflux_output_conversion ! heat flux from advec_s_bc
[87]	190	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
	191	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
[1]	192
[667]	193	!
[1498]	194	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
	195	!-- scale) vertical fluxes and velocity variances by using commonly-
	196	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
	197	!-- in combination with the 5th order advection scheme, pronounced
	198	!-- artificial kinks could be observed in the vertical profiles near the
	199	!-- surface. Please note: these kinks were not related to the model truth,
	200	!-- i.e. these kinks are just related to an evaluation problem.
	201	!-- In order avoid these kinks, vertical fluxes and horizontal as well
	202	!-- vertical velocity variances are calculated directly within the advection
	203	!-- routines, according to the numerical discretization, to evaluate the
	204	!-- statistical quantities as they will appear within the prognostic
	205	!-- equations.
[667]	206	!-- Copy the turbulent quantities, evaluated in the advection routines to
[1498]	207	!-- the local array sums_l() for further computations.
[743]	208	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
[696]	209
[1007]	210	!
[673]	211	!-- According to the Neumann bc for the horizontal velocity components,
	212	!-- the corresponding fluxes has to satisfiy the same bc.
[3294]	213	IF ( ocean_mode ) THEN
[801]	214	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
[1007]	215	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
[673]	216	ENDIF
[696]	217
	218	DO i = 0, threads_per_task-1
[1007]	219	!
[696]	220	!-- Swap the turbulent quantities evaluated in advec_ws.
[2037]	221	sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
	222	* momentumflux_output_conversion ! wu
	223	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
	224	* momentumflux_output_conversion ! wv
[801]	225	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
	226	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
	227	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
[1353]	228	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
[1320]	229	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
[801]	230	sums_ws2_ws_l(:,i) ) ! e*
[667]	231	ENDDO
[696]	232
[667]	233	ENDIF
[696]	234
[1567]	235	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[696]	236
	237	DO i = 0, threads_per_task-1
[2037]	238	sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
	239	* heatflux_output_conversion ! wpt
[3294]	240	IF ( ocean_mode ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
[2037]	241	IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
	242	* waterflux_output_conversion ! wq
[2270]	243	IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! ws
[696]	244	ENDDO
	245
[667]	246	ENDIF
[305]	247	!
[1]	248	!-- Horizontally averaged profiles of horizontal velocities and temperature.
	249	!-- They must have been computed before, because they are already required
	250	!-- for other horizontal averages.
	251	tn = 0
[2232]	252	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	253	!$ tn = omp_get_thread_num()
[1]	254	!$OMP DO
[3658]	255	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag) &
	256	!$ACC PRESENT(wall_flags_0, u, v, pt, rmask, sums_l)
[1]	257	DO i = nxl, nxr
	258	DO j = nys, nyn
[2232]	259	DO k = nzb, nzt+1
	260	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
[3658]	261	!$ACC ATOMIC
[2232]	262	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
	263	* flag
[3658]	264	!$ACC ATOMIC
[2232]	265	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
	266	* flag
[3658]	267	!$ACC ATOMIC
[2232]	268	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
	269	* flag
[1]	270	ENDDO
	271	ENDDO
	272	ENDDO
[3658]	273	!$ACC UPDATE HOST(sums_l(:,1,tn), sums_l(:,2,tn), sums_l(:,4,tn))
[1]	274
	275	!
[96]	276	!-- Horizontally averaged profile of salinity
[3294]	277	IF ( ocean_mode ) THEN
[96]	278	!$OMP DO
	279	DO i = nxl, nxr
	280	DO j = nys, nyn
[2232]	281	DO k = nzb, nzt+1
	282	sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
	283	* rmask(j,i,sr) &
	284	* MERGE( 1.0_wp, 0.0_wp, &
	285	BTEST( wall_flags_0(k,j,i), 22 ) )
[96]	286	ENDDO
	287	ENDDO
	288	ENDDO
	289	ENDIF
	290
	291	!
[1]	292	!-- Horizontally averaged profiles of virtual potential temperature,
[3040]	293	!-- total water content, water vapor mixing ratio and liquid water potential
[1]	294	!-- temperature
[75]	295	IF ( humidity ) THEN
[1]	296	!$OMP DO
	297	DO i = nxl, nxr
	298	DO j = nys, nyn
[2232]	299	DO k = nzb, nzt+1
	300	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	301	sums_l(k,44,tn) = sums_l(k,44,tn) + &
	302	vpt(k,j,i) * rmask(j,i,sr) * flag
	303	sums_l(k,41,tn) = sums_l(k,41,tn) + &
	304	q(k,j,i) * rmask(j,i,sr) * flag
[1]	305	ENDDO
	306	ENDDO
	307	ENDDO
[3274]	308	IF ( bulk_cloud_model ) THEN
[1]	309	!$OMP DO
	310	DO i = nxl, nxr
	311	DO j = nys, nyn
[2232]	312	DO k = nzb, nzt+1
	313	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	314	sums_l(k,42,tn) = sums_l(k,42,tn) + &
	315	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
	316	* flag
	317	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
[3274]	318	pt(k,j,i) + lv_d_cp * d_exner(k) * ql(k,j,i) &
[2232]	319	) * rmask(j,i,sr) &
	320	* flag
[1]	321	ENDDO
	322	ENDDO
	323	ENDDO
	324	ENDIF
	325	ENDIF
	326
	327	!
	328	!-- Horizontally averaged profiles of passive scalar
	329	IF ( passive_scalar ) THEN
	330	!$OMP DO
	331	DO i = nxl, nxr
	332	DO j = nys, nyn
[2232]	333	DO k = nzb, nzt+1
[2270]	334	sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
[2232]	335	* rmask(j,i,sr) &
	336	* MERGE( 1.0_wp, 0.0_wp, &
	337	BTEST( wall_flags_0(k,j,i), 22 ) )
[1]	338	ENDDO
	339	ENDDO
	340	ENDDO
	341	ENDIF
	342	!$OMP END PARALLEL
	343	!
	344	!-- Summation of thread sums
	345	IF ( threads_per_task > 1 ) THEN
	346	DO i = 1, threads_per_task-1
	347	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
	348	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
	349	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
[3294]	350	IF ( ocean_mode ) THEN
[96]	351	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
	352	ENDIF
[75]	353	IF ( humidity ) THEN
[1]	354	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
	355	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
[3274]	356	IF ( bulk_cloud_model ) THEN
[1]	357	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
	358	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
	359	ENDIF
	360	ENDIF
	361	IF ( passive_scalar ) THEN
[2270]	362	sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
[1]	363	ENDIF
	364	ENDDO
	365	ENDIF
	366
	367	#if defined( __parallel )
	368	!
	369	!-- Compute total sum from local sums
[622]	370	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	371	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
[1]	372	MPI_SUM, comm2d, ierr )
[622]	373	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	374	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
[1]	375	MPI_SUM, comm2d, ierr )
[622]	376	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	377	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
[1]	378	MPI_SUM, comm2d, ierr )
[3294]	379	IF ( ocean_mode ) THEN
[622]	380	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	381	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
[96]	382	MPI_REAL, MPI_SUM, comm2d, ierr )
	383	ENDIF
[75]	384	IF ( humidity ) THEN
[622]	385	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	386	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
[1]	387	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	388	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	389	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
[1]	390	MPI_REAL, MPI_SUM, comm2d, ierr )
[3274]	391	IF ( bulk_cloud_model ) THEN
[622]	392	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	393	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
[1]	394	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	395	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	396	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
[1]	397	MPI_REAL, MPI_SUM, comm2d, ierr )
	398	ENDIF
	399	ENDIF
	400
	401	IF ( passive_scalar ) THEN
[622]	402	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2270]	403	CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
[1]	404	MPI_REAL, MPI_SUM, comm2d, ierr )
	405	ENDIF
	406	#else
	407	sums(:,1) = sums_l(:,1,0)
	408	sums(:,2) = sums_l(:,2,0)
	409	sums(:,4) = sums_l(:,4,0)
[3294]	410	IF ( ocean_mode ) sums(:,23) = sums_l(:,23,0)
[75]	411	IF ( humidity ) THEN
[1]	412	sums(:,44) = sums_l(:,44,0)
	413	sums(:,41) = sums_l(:,41,0)
[3274]	414	IF ( bulk_cloud_model ) THEN
[1]	415	sums(:,42) = sums_l(:,42,0)
	416	sums(:,43) = sums_l(:,43,0)
	417	ENDIF
	418	ENDIF
[2270]	419	IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
[1]	420	#endif
	421
	422	!
	423	!-- Final values are obtained by division by the total number of grid points
	424	!-- used for summation. After that store profiles.
[132]	425	sums(:,1) = sums(:,1) / ngp_2dh(sr)
	426	sums(:,2) = sums(:,2) / ngp_2dh(sr)
	427	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
[1]	428	hom(:,1,1,sr) = sums(:,1) ! u
	429	hom(:,1,2,sr) = sums(:,2) ! v
	430	hom(:,1,4,sr) = sums(:,4) ! pt
[3658]	431	!$ACC UPDATE DEVICE(hom(:,1,1,sr), hom(:,1,2,sr), hom(:,1,4,sr))
[1]	432
[667]	433
[1]	434	!
[96]	435	!-- Salinity
[3294]	436	IF ( ocean_mode ) THEN
[132]	437	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
[96]	438	hom(:,1,23,sr) = sums(:,23) ! sa
	439	ENDIF
	440
	441	!
[1]	442	!-- Humidity and cloud parameters
[75]	443	IF ( humidity ) THEN
[132]	444	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
	445	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
[1]	446	hom(:,1,44,sr) = sums(:,44) ! vpt
	447	hom(:,1,41,sr) = sums(:,41) ! qv (q)
[3274]	448	IF ( bulk_cloud_model ) THEN
[132]	449	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
	450	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
[1]	451	hom(:,1,42,sr) = sums(:,42) ! qv
	452	hom(:,1,43,sr) = sums(:,43) ! pt
	453	ENDIF
	454	ENDIF
	455
	456	!
	457	!-- Passive scalar
[2270]	458	IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
[1960]	459	ngp_2dh_s_inner(:,sr) ! s
[1]	460
	461	!
	462	!-- Horizontally averaged profiles of the remaining prognostic variables,
	463	!-- variances, the total and the perturbation energy (single values in last
	464	!-- column of sums_l) and some diagnostic quantities.
[132]	465	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	466	!-- ---- speaking the following k-loop would have to be split up and
	467	!-- rearranged according to the staggered grid.
[132]	468	!-- However, this implies no error since staggered velocity components
	469	!-- are zero at the walls and inside buildings.
[1]	470	tn = 0
[3241]	471	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, &
[1815]	472	!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
[2232]	473	!$OMP w2, flag, m, ki, l )
	474	!$ tn = omp_get_thread_num()
[1]	475	!$OMP DO
[3658]	476	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, m) &
	477	!$ACC PRIVATE(sums_l_etot, flag) &
	478	!$ACC PRESENT(wall_flags_0, rmask, momentumflux_output_conversion) &
	479	!$ACC PRESENT(hom(:,1,4,sr)) &
	480	!$ACC PRESENT(e, u, v, w, km, kh, p, pt) &
	481	!$ACC PRESENT(surf_def_h(0), surf_lsm_h, surf_usm_h) &
	482	!$ACC PRESENT(sums_l)
[1]	483	DO i = nxl, nxr
	484	DO j = nys, nyn
[1353]	485	sums_l_etot = 0.0_wp
[2232]	486	DO k = nzb, nzt+1
	487	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
[1]	488	!
	489	!-- Prognostic and diagnostic variables
[3658]	490	!$ACC ATOMIC
[2232]	491	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
	492	* flag
[3658]	493	!$ACC ATOMIC
[2232]	494	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
	495	* flag
[3658]	496	!$ACC ATOMIC
[2232]	497	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
	498	* flag
[3658]	499	!$ACC ATOMIC
[2232]	500	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
	501	* flag
[3658]	502	!$ACC ATOMIC
[2252]	503	sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
	504	/ momentumflux_output_conversion(k) ) &
	505	* flag
[1]	506
[3658]	507	!$ACC ATOMIC
[1]	508	sums_l(k,33,tn) = sums_l(k,33,tn) + &
[2232]	509	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)&
	510	* flag
[3658]	511	#ifndef _OPENACC
[624]	512	IF ( humidity ) THEN
	513	sums_l(k,70,tn) = sums_l(k,70,tn) + &
[2232]	514	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)&
	515	* flag
[624]	516	ENDIF
[1960]	517	IF ( passive_scalar ) THEN
[2270]	518	sums_l(k,116,tn) = sums_l(k,116,tn) + &
	519	( s(k,j,i)-hom(k,1,115,sr) )*2 rmask(j,i,sr)&
[2232]	520	* flag
[1960]	521	ENDIF
[3658]	522	#endif
[699]	523	!
	524	!-- Higher moments
	525	!-- (Computation of the skewness of w further below)
[3658]	526	!$ACC ATOMIC
[2232]	527	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr) &
	528	* flag
[667]	529
[1]	530	sums_l_etot = sums_l_etot + &
[2232]	531	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
	532	w(k,j,i)*2 ) rmask(j,i,sr)&
	533	* flag
[1]	534	ENDDO
	535	!
	536	!-- Total and perturbation energy for the total domain (being
	537	!-- collected in the last column of sums_l). Summation of these
	538	!-- quantities is seperated from the previous loop in order to
	539	!-- allow vectorization of that loop.
[3658]	540	!$ACC ATOMIC
[87]	541	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
[1]	542	!
	543	!-- 2D-arrays (being collected in the last column of sums_l)
[2773]	544	IF ( surf_def_h(0)%end_index(j,i) >= &
[2696]	545	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	546	m = surf_def_h(0)%start_index(j,i)
[3658]	547	!$ACC ATOMIC
[2773]	548	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	549	surf_def_h(0)%us(m) * rmask(j,i,sr)
[3658]	550	!$ACC ATOMIC
[2773]	551	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	552	surf_def_h(0)%usws(m) * rmask(j,i,sr)
[3658]	553	!$ACC ATOMIC
[2773]	554	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	555	surf_def_h(0)%vsws(m) * rmask(j,i,sr)
[3658]	556	!$ACC ATOMIC
[2773]	557	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	558	surf_def_h(0)%ts(m) * rmask(j,i,sr)
[3658]	559	#ifndef _OPENACC
[2232]	560	IF ( humidity ) THEN
[2773]	561	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	562	surf_def_h(0)%qs(m) * rmask(j,i,sr)
	563	ENDIF
	564	IF ( passive_scalar ) THEN
[2773]	565	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	566	surf_def_h(0)%ss(m) * rmask(j,i,sr)
	567	ENDIF
[3658]	568	#endif
[2773]	569	!
	570	!-- Summation of surface temperature.
[3658]	571	!$ACC ATOMIC
[2773]	572	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	573	surf_def_h(0)%pt_surface(m) * &
	574	rmask(j,i,sr)
[197]	575	ENDIF
[2696]	576	IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
[2232]	577	m = surf_lsm_h%start_index(j,i)
[3658]	578	!$ACC ATOMIC
[2773]	579	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	580	surf_lsm_h%us(m) * rmask(j,i,sr)
[3658]	581	!$ACC ATOMIC
[2773]	582	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	583	surf_lsm_h%usws(m) * rmask(j,i,sr)
[3658]	584	!$ACC ATOMIC
[2773]	585	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	586	surf_lsm_h%vsws(m) * rmask(j,i,sr)
[3658]	587	!$ACC ATOMIC
[2773]	588	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	589	surf_lsm_h%ts(m) * rmask(j,i,sr)
[3658]	590	#ifndef _OPENACC
[2232]	591	IF ( humidity ) THEN
[2773]	592	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	593	surf_lsm_h%qs(m) * rmask(j,i,sr)
	594	ENDIF
	595	IF ( passive_scalar ) THEN
[2773]	596	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	597	surf_lsm_h%ss(m) * rmask(j,i,sr)
	598	ENDIF
[3658]	599	#endif
[2773]	600	!
	601	!-- Summation of surface temperature.
[3658]	602	!$ACC ATOMIC
[2773]	603	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	604	surf_lsm_h%pt_surface(m) * &
	605	rmask(j,i,sr)
[1960]	606	ENDIF
[2696]	607	IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
	608	m = surf_usm_h%start_index(j,i)
[3658]	609	!$ACC ATOMIC
[2773]	610	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	611	surf_usm_h%us(m) * rmask(j,i,sr)
[3658]	612	!$ACC ATOMIC
[2773]	613	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	614	surf_usm_h%usws(m) * rmask(j,i,sr)
[3658]	615	!$ACC ATOMIC
[2773]	616	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	617	surf_usm_h%vsws(m) * rmask(j,i,sr)
[3658]	618	!$ACC ATOMIC
[2773]	619	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	620	surf_usm_h%ts(m) * rmask(j,i,sr)
[3658]	621	#ifndef _OPENACC
[2232]	622	IF ( humidity ) THEN
[2773]	623	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	624	surf_usm_h%qs(m) * rmask(j,i,sr)
	625	ENDIF
	626	IF ( passive_scalar ) THEN
[2773]	627	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	628	surf_usm_h%ss(m) * rmask(j,i,sr)
	629	ENDIF
[3658]	630	#endif
[2773]	631	!
	632	!-- Summation of surface temperature.
[3658]	633	!$ACC ATOMIC
[2773]	634	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	635	surf_usm_h%pt_surface(m) * &
	636	rmask(j,i,sr)
[2232]	637	ENDIF
[1]	638	ENDDO
	639	ENDDO
[3658]	640	!$ACC UPDATE &
	641	!$ACC HOST(sums_l(:,3,tn), sums_l(:,8,tn), sums_l(:,9,tn)) &
	642	!$ACC HOST(sums_l(:,10,tn), sums_l(:,40,tn), sums_l(:,33,tn)) &
	643	!$ACC HOST(sums_l(:,38,tn)) &
	644	!$ACC HOST(sums_l(nzb:nzb+4,pr_palm,tn), sums_l(nzb+14:nzb+14,pr_palm,tn))
[1]	645
	646	!
[667]	647	!-- Computation of statistics when ws-scheme is not used. Else these
	648	!-- quantities are evaluated in the advection routines.
[1918]	649	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
	650	THEN
[667]	651	!$OMP DO
	652	DO i = nxl, nxr
	653	DO j = nys, nyn
[2232]	654	DO k = nzb, nzt+1
	655	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	656
[667]	657	u2 = u(k,j,i)**2
	658	v2 = v(k,j,i)**2
	659	w2 = w(k,j,i)**2
	660	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	661	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	662
[2232]	663	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
	664	* flag
	665	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
	666	* flag
	667	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
	668	* flag
[667]	669	!
[2026]	670	!-- Perturbation energy
[667]	671
[1353]	672	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
[2232]	673	( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
	674	* flag
[667]	675	ENDDO
	676	ENDDO
	677	ENDDO
	678	ENDIF
[2026]	679	!
	680	!-- Computaion of domain-averaged perturbation energy. Please note,
	681	!-- to prevent that perturbation energy is larger (even if only slightly)
	682	!-- than the total kinetic energy, calculation is based on deviations from
	683	!-- the horizontal mean, instead of spatial descretization of the advection
	684	!-- term.
	685	!$OMP DO
[3658]	686	!$ACC PARALLEL LOOP COLLAPSE(3) PRIVATE(i, j, k, flag, w2, ust2, vst2) &
	687	!$ACC PRESENT(wall_flags_0, u, v, w, rmask, hom(:,1,1:2,sr)) &
	688	!$ACC PRESENT(sums_l)
[2026]	689	DO i = nxl, nxr
	690	DO j = nys, nyn
[2232]	691	DO k = nzb, nzt+1
	692	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	693
[2026]	694	w2 = w(k,j,i)**2
	695	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	696	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	697	w2 = w(k,j,i)**2
[1241]	698
[3658]	699	!$ACC ATOMIC
[2026]	700	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
[2232]	701	+ 0.5_wp * ( ust2 + vst2 + w2 ) &
	702	* rmask(j,i,sr) &
	703	* flag
[2026]	704	ENDDO
	705	ENDDO
	706	ENDDO
[3658]	707	!$ACC UPDATE HOST(sums_l(nzb+5:nzb+5,pr_palm,tn))
[2026]	708
[667]	709	!
[1]	710	!-- Horizontally averaged profiles of the vertical fluxes
[667]	711
[1]	712	!$OMP DO
[3658]	713	!$ACC PARALLEL LOOP COLLAPSE(2) PRIVATE(i, j, k, l, m) &
	714	!$ACC PRIVATE(ki, flag, ust, vst, pts) &
	715	!$ACC PRESENT(kh, km, u, v, w, pt) &
	716	!$ACC PRESENT(wall_flags_0, rmask, ddzu, rho_air_zw, hom(:,1,1:4,sr)) &
	717	!$ACC PRESENT(heatflux_output_conversion, momentumflux_output_conversion) &
	718	!$ACC PRESENT(surf_def_h(0:2), surf_lsm_h, surf_usm_h) &
	719	!$ACC PRESENT(sums_l)
[1]	720	DO i = nxl, nxr
	721	DO j = nys, nyn
	722	!
	723	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
	724	!-- oterwise from k=nzb+1)
[132]	725	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
[1]	726	!-- ---- strictly speaking the following k-loop would have to be
	727	!-- split up according to the staggered grid.
[132]	728	!-- However, this implies no error since staggered velocity
	729	!-- components are zero at the walls and inside buildings.
[2232]	730	!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
	731	!-- which are added further below.
	732	DO k = nzb, nzt
	733	flag = MERGE( 1.0_wp, 0.0_wp, &
	734	BTEST( wall_flags_0(k,j,i), 23 ) ) * &
	735	MERGE( 1.0_wp, 0.0_wp, &
	736	BTEST( wall_flags_0(k,j,i), 9 ) )
[1]	737	!
	738	!-- Momentum flux w"u"
[3658]	739	!$ACC ATOMIC
[1353]	740	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
[1]	741	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
	742	) * ( &
	743	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
	744	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
[2037]	745	) * rmask(j,i,sr) &
	746	* rho_air_zw(k) &
[2232]	747	* momentumflux_output_conversion(k) &
	748	* flag
[1]	749	!
	750	!-- Momentum flux w"v"
[3658]	751	!$ACC ATOMIC
[1353]	752	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
[1]	753	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
	754	) * ( &
	755	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
	756	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
[2037]	757	) * rmask(j,i,sr) &
	758	* rho_air_zw(k) &
[2232]	759	* momentumflux_output_conversion(k) &
	760	* flag
[1]	761	!
	762	!-- Heat flux w"pt"
[3658]	763	!$ACC ATOMIC
[1]	764	sums_l(k,16,tn) = sums_l(k,16,tn) &
[1353]	765	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	766	* ( pt(k+1,j,i) - pt(k,j,i) ) &
[2037]	767	* rho_air_zw(k) &
	768	* heatflux_output_conversion(k) &
[2232]	769	* ddzu(k+1) * rmask(j,i,sr) &
	770	* flag
[1]	771
	772	!
[96]	773	!-- Salinity flux w"sa"
[3658]	774	#ifndef _OPENACC
[3294]	775	IF ( ocean_mode ) THEN
[96]	776	sums_l(k,65,tn) = sums_l(k,65,tn) &
[1353]	777	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[96]	778	* ( sa(k+1,j,i) - sa(k,j,i) ) &
[2232]	779	* ddzu(k+1) * rmask(j,i,sr) &
	780	* flag
[96]	781	ENDIF
	782
	783	!
[1]	784	!-- Buoyancy flux, water flux (humidity flux) w"q"
[75]	785	IF ( humidity ) THEN
[1]	786	sums_l(k,45,tn) = sums_l(k,45,tn) &
[1353]	787	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	788	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
[2037]	789	* rho_air_zw(k) &
	790	* heatflux_output_conversion(k) &
[2232]	791	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	792	sums_l(k,48,tn) = sums_l(k,48,tn) &
[1353]	793	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	794	* ( q(k+1,j,i) - q(k,j,i) ) &
[2037]	795	* rho_air_zw(k) &
	796	* waterflux_output_conversion(k)&
[2232]	797	* ddzu(k+1) * rmask(j,i,sr) * flag
[1007]	798
[3274]	799	IF ( bulk_cloud_model ) THEN
[1]	800	sums_l(k,51,tn) = sums_l(k,51,tn) &
[1353]	801	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	802	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
	803	- ( q(k,j,i) - ql(k,j,i) ) ) &
[2037]	804	* rho_air_zw(k) &
	805	* waterflux_output_conversion(k)&
[2232]	806	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	807	ENDIF
	808	ENDIF
	809
	810	!
	811	!-- Passive scalar flux
	812	IF ( passive_scalar ) THEN
[2270]	813	sums_l(k,117,tn) = sums_l(k,117,tn) &
[1353]	814	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[2026]	815	* ( s(k+1,j,i) - s(k,j,i) ) &
[2232]	816	* ddzu(k+1) * rmask(j,i,sr) &
	817	* flag
[1]	818	ENDIF
[3658]	819	#endif
[1]	820
	821	ENDDO
	822
	823	!
	824	!-- Subgridscale fluxes in the Prandtl layer
	825	IF ( use_surface_fluxes ) THEN
[2232]	826	DO l = 0, 1
[3658]	827	! The original code using MERGE doesn't work with the PGI
	828	! compiler when running on the GPU.
[3676]	829	! This is submitted as a compiler Bug in PGI ticket TPR#26718
[3658]	830	! ki = MERGE( -1, 0, l == 0 )
	831	ki = -1 + l
[2232]	832	IF ( surf_def_h(l)%ns >= 1 ) THEN
[2696]	833	DO m = surf_def_h(l)%start_index(j,i), &
	834	surf_def_h(l)%end_index(j,i)
[2232]	835	k = surf_def_h(l)%k(m)
	836
[3658]	837	!$ACC ATOMIC
[2232]	838	sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
	839	momentumflux_output_conversion(k+ki) * &
	840	surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	841	!$ACC ATOMIC
[2232]	842	sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
	843	momentumflux_output_conversion(k+ki) * &
	844	surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	845	!$ACC ATOMIC
[2232]	846	sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
	847	heatflux_output_conversion(k+ki) * &
	848	surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	849	#if 0
[2232]	850	sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
	851	0.0_wp * rmask(j,i,sr) ! u"pt"
	852	sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
	853	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	854	#endif
	855	#ifndef _OPENACC
[3294]	856	IF ( ocean_mode ) THEN
[2232]	857	sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
	858	surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
	859	ENDIF
	860	IF ( humidity ) THEN
	861	sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
	862	waterflux_output_conversion(k+ki) * &
	863	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	864	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	865	( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
	866	surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
	867	surf_def_h(l)%qsws(m) ) &
	868	* heatflux_output_conversion(k+ki)
	869	IF ( cloud_droplets ) THEN
	870	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	871	( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
	872	ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
	873	0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
	874	* heatflux_output_conversion(k+ki)
	875	ENDIF
[3274]	876	IF ( bulk_cloud_model ) THEN
[2232]	877	!
	878	!-- Formula does not work if ql(k+ki) /= 0.0
	879	sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
	880	waterflux_output_conversion(k+ki) * &
	881	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	882	ENDIF
	883	ENDIF
	884	IF ( passive_scalar ) THEN
[2270]	885	sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
[2232]	886	surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
	887	ENDIF
[3658]	888	#endif
[2232]	889
	890	ENDDO
	891
	892	ENDIF
	893	ENDDO
[2696]	894	IF ( surf_lsm_h%end_index(j,i) >= &
	895	surf_lsm_h%start_index(j,i) ) THEN
[2232]	896	m = surf_lsm_h%start_index(j,i)
[3658]	897	!$ACC ATOMIC
[2232]	898	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
[2037]	899	momentumflux_output_conversion(nzb) * &
[2232]	900	surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	901	!$ACC ATOMIC
[2232]	902	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
[2037]	903	momentumflux_output_conversion(nzb) * &
[2232]	904	surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	905	!$ACC ATOMIC
[2232]	906	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
[2037]	907	heatflux_output_conversion(nzb) * &
[2232]	908	surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	909	#if 0
[2232]	910	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
[1353]	911	0.0_wp * rmask(j,i,sr) ! u"pt"
[2232]	912	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
[1353]	913	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	914	#endif
	915	#ifndef _OPENACC
[3294]	916	IF ( ocean_mode ) THEN
[2232]	917	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	918	surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	919	ENDIF
	920	IF ( humidity ) THEN
	921	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
	922	waterflux_output_conversion(nzb) * &
	923	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	924	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	925	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
	926	surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	927	surf_lsm_h%qsws(m) ) &
	928	* heatflux_output_conversion(nzb)
	929	IF ( cloud_droplets ) THEN
	930	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	931	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
	932	ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
	933	0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
	934	* heatflux_output_conversion(nzb)
	935	ENDIF
[3274]	936	IF ( bulk_cloud_model ) THEN
[2232]	937	!
	938	!-- Formula does not work if ql(nzb) /= 0.0
	939	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
	940	waterflux_output_conversion(nzb) * &
	941	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	942	ENDIF
	943	ENDIF
	944	IF ( passive_scalar ) THEN
[2270]	945	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	946	surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	947	ENDIF
[3658]	948	#endif
[2232]	949
[96]	950	ENDIF
[2696]	951	IF ( surf_usm_h%end_index(j,i) >= &
	952	surf_usm_h%start_index(j,i) ) THEN
[2232]	953	m = surf_usm_h%start_index(j,i)
[3658]	954	!$ACC ATOMIC
[2232]	955	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
	956	momentumflux_output_conversion(nzb) * &
	957	surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	958	!$ACC ATOMIC
[2232]	959	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
	960	momentumflux_output_conversion(nzb) * &
	961	surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	962	!$ACC ATOMIC
[2232]	963	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
	964	heatflux_output_conversion(nzb) * &
	965	surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	966	#if 0
[2232]	967	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
	968	0.0_wp * rmask(j,i,sr) ! u"pt"
	969	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
	970	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	971	#endif
	972	#ifndef _OPENACC
[3294]	973	IF ( ocean_mode ) THEN
[2232]	974	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	975	surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	976	ENDIF
	977	IF ( humidity ) THEN
	978	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
[2037]	979	waterflux_output_conversion(nzb) * &
[2232]	980	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	981	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	982	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
[2232]	983	surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	984	surf_usm_h%qsws(m) ) &
[2037]	985	* heatflux_output_conversion(nzb)
[2232]	986	IF ( cloud_droplets ) THEN
	987	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	988	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
[2232]	989	ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
	990	0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
[2037]	991	* heatflux_output_conversion(nzb)
[2232]	992	ENDIF
[3274]	993	IF ( bulk_cloud_model ) THEN
[1]	994	!
[2232]	995	!-- Formula does not work if ql(nzb) /= 0.0
	996	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
[2037]	997	waterflux_output_conversion(nzb) * &
[2232]	998	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	999	ENDIF
[1]	1000	ENDIF
[2232]	1001	IF ( passive_scalar ) THEN
[2270]	1002	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	1003	surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	1004	ENDIF
[3658]	1005	#endif
[2232]	1006
[1]	1007	ENDIF
[2232]	1008
[1]	1009	ENDIF
	1010
[3658]	1011	#ifndef _OPENACC
[1691]	1012	IF ( .NOT. neutral ) THEN
[2696]	1013	IF ( surf_def_h(0)%end_index(j,i) >= &
	1014	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	1015	m = surf_def_h(0)%start_index(j,i)
[2696]	1016	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1017	surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
	1018	ENDIF
[2696]	1019	IF ( surf_lsm_h%end_index(j,i) >= &
	1020	surf_lsm_h%start_index(j,i) ) THEN
[2232]	1021	m = surf_lsm_h%start_index(j,i)
[2696]	1022	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1023	surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
	1024	ENDIF
[2696]	1025	IF ( surf_usm_h%end_index(j,i) >= &
	1026	surf_usm_h%start_index(j,i) ) THEN
[2232]	1027	m = surf_usm_h%start_index(j,i)
[2696]	1028	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1029	surf_usm_h%ol(m) * rmask(j,i,sr) ! L
	1030	ENDIF
[1691]	1031	ENDIF
	1032
[2296]	1033	IF ( radiation ) THEN
[2696]	1034	IF ( surf_def_h(0)%end_index(j,i) >= &
	1035	surf_def_h(0)%start_index(j,i) ) THEN
	1036	m = surf_def_h(0)%start_index(j,i)
	1037	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1038	surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
	1039	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1040	surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
	1041	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1042	surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
	1043	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1044	surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
	1045	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1046	surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
	1047	ENDIF
	1048	IF ( surf_lsm_h%end_index(j,i) >= &
	1049	surf_lsm_h%start_index(j,i) ) THEN
	1050	m = surf_lsm_h%start_index(j,i)
	1051	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1052	surf_lsm_h%rad_net(m) * rmask(j,i,sr)
	1053	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1054	surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
	1055	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1056	surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
	1057	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1058	surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
	1059	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1060	surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
	1061	ENDIF
	1062	IF ( surf_usm_h%end_index(j,i) >= &
	1063	surf_usm_h%start_index(j,i) ) THEN
	1064	m = surf_usm_h%start_index(j,i)
	1065	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1066	surf_usm_h%rad_net(m) * rmask(j,i,sr)
	1067	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1068	surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
	1069	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1070	surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
	1071	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1072	surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
	1073	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1074	surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
	1075	ENDIF
[1585]	1076
	1077	#if defined ( __rrtmg )
	1078	IF ( radiation_scheme == 'rrtmg' ) THEN
[2696]	1079
	1080	IF ( surf_def_h(0)%end_index(j,i) >= &
	1081	surf_def_h(0)%start_index(j,i) ) THEN
	1082	m = surf_def_h(0)%start_index(j,i)
	1083	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1084	surf_def_h(0)%rrtm_aldif(0,m) * rmask(j,i,sr)
[2696]	1085	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1086	surf_def_h(0)%rrtm_aldir(0,m) * rmask(j,i,sr)
[2696]	1087	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1088	surf_def_h(0)%rrtm_asdif(0,m) * rmask(j,i,sr)
[2696]	1089	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1090	surf_def_h(0)%rrtm_asdir(0,m) * rmask(j,i,sr)
[2696]	1091	ENDIF
	1092	IF ( surf_lsm_h%end_index(j,i) >= &
	1093	surf_lsm_h%start_index(j,i) ) THEN
	1094	m = surf_lsm_h%start_index(j,i)
	1095	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1096	SUM( surf_lsm_h%frac(:,m) * &
	1097	surf_lsm_h%rrtm_aldif(:,m) ) * rmask(j,i,sr)
[2696]	1098	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1099	SUM( surf_lsm_h%frac(:,m) * &
	1100	surf_lsm_h%rrtm_aldir(:,m) ) * rmask(j,i,sr)
[2696]	1101	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1102	SUM( surf_lsm_h%frac(:,m) * &
	1103	surf_lsm_h%rrtm_asdif(:,m) ) * rmask(j,i,sr)
[2696]	1104	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1105	SUM( surf_lsm_h%frac(:,m) * &
	1106	surf_lsm_h%rrtm_asdir(:,m) ) * rmask(j,i,sr)
[2696]	1107	ENDIF
	1108	IF ( surf_usm_h%end_index(j,i) >= &
	1109	surf_usm_h%start_index(j,i) ) THEN
	1110	m = surf_usm_h%start_index(j,i)
	1111	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1112	SUM( surf_usm_h%frac(:,m) * &
	1113	surf_usm_h%rrtm_aldif(:,m) ) * rmask(j,i,sr)
[2696]	1114	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1115	SUM( surf_usm_h%frac(:,m) * &
	1116	surf_usm_h%rrtm_aldir(:,m) ) * rmask(j,i,sr)
[2696]	1117	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1118	SUM( surf_usm_h%frac(:,m) * &
	1119	surf_usm_h%rrtm_asdif(:,m) ) * rmask(j,i,sr)
[2696]	1120	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1121	SUM( surf_usm_h%frac(:,m) * &
	1122	surf_usm_h%rrtm_asdir(:,m) ) * rmask(j,i,sr)
[2696]	1123	ENDIF
	1124
[1585]	1125	ENDIF
	1126	#endif
[1551]	1127	ENDIF
[3658]	1128	#endif
[1]	1129	!
[19]	1130	!-- Subgridscale fluxes at the top surface
	1131	IF ( use_top_fluxes ) THEN
[2232]	1132	m = surf_def_h(2)%start_index(j,i)
[3658]	1133	!$ACC ATOMIC
	1134	sums_l(nzt,12,tn) = sums_l(nzt,12,tn) + &
	1135	momentumflux_output_conversion(nzt) * &
[2232]	1136	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
[3658]	1137	!$ACC ATOMIC
	1138	sums_l(nzt+1,12,tn) = sums_l(nzt+1,12,tn) + &
	1139	momentumflux_output_conversion(nzt+1) * &
	1140	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
	1141	!$ACC ATOMIC
	1142	sums_l(nzt,14,tn) = sums_l(nzt,14,tn) + &
	1143	momentumflux_output_conversion(nzt) * &
[2232]	1144	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
[3658]	1145	!$ACC ATOMIC
	1146	sums_l(nzt+1,14,tn) = sums_l(nzt+1,14,tn) + &
	1147	momentumflux_output_conversion(nzt+1) * &
	1148	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
	1149	!$ACC ATOMIC
	1150	sums_l(nzt,16,tn) = sums_l(nzt,16,tn) + &
	1151	heatflux_output_conversion(nzt) * &
[2232]	1152	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
[3658]	1153	!$ACC ATOMIC
	1154	sums_l(nzt+1,16,tn) = sums_l(nzt+1,16,tn) + &
	1155	heatflux_output_conversion(nzt+1) * &
	1156	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
	1157	#if 0
[550]	1158	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
[1353]	1159	0.0_wp * rmask(j,i,sr) ! u"pt"
[550]	1160	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
[1353]	1161	0.0_wp * rmask(j,i,sr) ! v"pt"
[3658]	1162	#endif
	1163	#ifndef _OPENACC
[3294]	1164	IF ( ocean_mode ) THEN
[96]	1165	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
[2232]	1166	surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
[96]	1167	ENDIF
[75]	1168	IF ( humidity ) THEN
[1353]	1169	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
[2037]	1170	waterflux_output_conversion(nzt) * &
[2232]	1171	surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
[1353]	1172	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1173	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
[2232]	1174	surf_def_h(2)%shf(m) + &
	1175	0.61_wp * pt(nzt,j,i) * &
	1176	surf_def_h(2)%qsws(m) ) &
[2037]	1177	* heatflux_output_conversion(nzt)
[1007]	1178	IF ( cloud_droplets ) THEN
[1353]	1179	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1180	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
[2232]	1181	ql(nzt,j,i) ) * &
	1182	surf_def_h(2)%shf(m) + &
	1183	0.61_wp * pt(nzt,j,i) * &
	1184	surf_def_h(2)%qsws(m) )&
[2037]	1185	* heatflux_output_conversion(nzt)
[1007]	1186	ENDIF
[3274]	1187	IF ( bulk_cloud_model ) THEN
[19]	1188	!
	1189	!-- Formula does not work if ql(nzb) /= 0.0
	1190	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
[2037]	1191	waterflux_output_conversion(nzt) * &
[2232]	1192	surf_def_h(2)%qsws(m) * rmask(j,i,sr)
[19]	1193	ENDIF
	1194	ENDIF
	1195	IF ( passive_scalar ) THEN
[2270]	1196	sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
[2232]	1197	surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
[19]	1198	ENDIF
[3658]	1199	#endif
[19]	1200	ENDIF
	1201
	1202	!
[1]	1203	!-- Resolved fluxes (can be computed for all horizontal points)
[132]	1204	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	1205	!-- ---- speaking the following k-loop would have to be split up and
	1206	!-- rearranged according to the staggered grid.
[2232]	1207	DO k = nzb, nzt
	1208	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
[1353]	1209	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1210	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1211	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1212	v(k+1,j,i) - hom(k+1,1,2,sr) )
	1213	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
	1214	pt(k+1,j,i) - hom(k+1,1,4,sr) )
[667]	1215
[1]	1216	!-- Higher moments
[3658]	1217	!$ACC ATOMIC
[1353]	1218	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
[2232]	1219	rmask(j,i,sr) * flag
[3658]	1220	!$ACC ATOMIC
[1353]	1221	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
[2232]	1222	rmask(j,i,sr) * flag
[1]	1223
	1224	!
[96]	1225	!-- Salinity flux and density (density does not belong to here,
[97]	1226	!-- but so far there is no other suitable place to calculate)
[3658]	1227	#ifndef _OPENACC
[3294]	1228	IF ( ocean_mode ) THEN
[1567]	1229	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1230	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
	1231	sa(k+1,j,i) - hom(k+1,1,23,sr) )
	1232	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
[2232]	1233	rmask(j,i,sr) * flag
[667]	1234	ENDIF
[2232]	1235	sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
	1236	rmask(j,i,sr) * flag
[1353]	1237	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
[2232]	1238	rmask(j,i,sr) * flag
[96]	1239	ENDIF
	1240
	1241	!
[1053]	1242	!-- Buoyancy flux, water flux, humidity flux, liquid water
	1243	!-- content, rain drop concentration and rain water content
[75]	1244	IF ( humidity ) THEN
[3274]	1245	IF ( bulk_cloud_model .OR. cloud_droplets ) THEN
[1353]	1246	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
[1007]	1247	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
[1353]	1248	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[4039]	1249	rho_air_zw(k) * &
[2037]	1250	heatflux_output_conversion(k) * &
[2232]	1251	rmask(j,i,sr) * flag
	1252	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
	1253	* flag
[1822]	1254
[1053]	1255	IF ( .NOT. cloud_droplets ) THEN
[1353]	1256	pts = 0.5_wp * &
[1115]	1257	( ( q(k,j,i) - ql(k,j,i) ) - &
	1258	hom(k,1,42,sr) + &
	1259	( q(k+1,j,i) - ql(k+1,j,i) ) - &
[1053]	1260	hom(k+1,1,42,sr) )
[1115]	1261	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
[4039]	1262	rho_air_zw(k) * &
[2037]	1263	waterflux_output_conversion(k) * &
[2232]	1264	rmask(j,i,sr) * &
	1265	flag
[1822]	1266	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
[2232]	1267	rmask(j,i,sr) * &
	1268	flag
[1822]	1269	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
[2232]	1270	rmask(j,i,sr) * &
	1271	flag
[2292]	1272	IF ( microphysics_morrison ) THEN
	1273	sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
	1274	rmask(j,i,sr) *&
	1275	flag
	1276	ENDIF
[1822]	1277	IF ( microphysics_seifert ) THEN
	1278	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
[2232]	1279	rmask(j,i,sr) *&
	1280	flag
[1822]	1281	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
[2232]	1282	rmask(j,i,sr) *&
	1283	flag
[1053]	1284	ENDIF
	1285	ENDIF
[1822]	1286
[1007]	1287	ELSE
[1567]	1288	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1289	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
	1290	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
	1291	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[4039]	1292	rho_air_zw(k) * &
[2037]	1293	heatflux_output_conversion(k) * &
[2232]	1294	rmask(j,i,sr) * &
	1295	flag
[1567]	1296	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[2037]	1297	sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
	1298	hom(k,1,41,sr) ) * &
	1299	sums_l(k,17,tn) + &
	1300	0.61_wp * hom(k,1,4,sr) * &
	1301	sums_l(k,49,tn) &
[2232]	1302	) * heatflux_output_conversion(k) * &
	1303	flag
[1007]	1304	END IF
	1305	END IF
[1]	1306	ENDIF
	1307	!
	1308	!-- Passive scalar flux
[1353]	1309	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
[1567]	1310	.OR. sr /= 0 ) ) THEN
[2270]	1311	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1312	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1313	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1314	rmask(j,i,sr) * flag
[1]	1315	ENDIF
[3658]	1316	#endif
[1]	1317
	1318	!
	1319	!-- Energy flux we
[667]	1320	!-- has to be adjusted
[3658]	1321	!$ACC ATOMIC
[1353]	1322	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
	1323	( ust2 + vst2 + w(k,j,i)**2 ) &
[2674]	1324	* rho_air_zw(k) &
[2037]	1325	* momentumflux_output_conversion(k) &
[2232]	1326	* rmask(j,i,sr) * flag
[1]	1327	ENDDO
	1328	ENDDO
	1329	ENDDO
[2232]	1330	!$OMP END PARALLEL
[3658]	1331
	1332	!$ACC UPDATE &
	1333	!$ACC HOST(sums_l(:,12,tn), sums_l(:,14,tn), sums_l(:,16,tn)) &
	1334	!$ACC HOST(sums_l(:,35,tn), sums_l(:,36,tn), sums_l(:,37,tn))
[709]	1335	!
[2232]	1336	!-- Treat land-surface quantities according to new wall model structure.
	1337	IF ( land_surface ) THEN
	1338	tn = 0
	1339	!$OMP PARALLEL PRIVATE( i, j, m, tn )
	1340	!$ tn = omp_get_thread_num()
	1341	!$OMP DO
	1342	DO m = 1, surf_lsm_h%ns
	1343	i = surf_lsm_h%i(m)
	1344	j = surf_lsm_h%j(m)
	1345
	1346	IF ( i >= nxl .AND. i <= nxr .AND. &
	1347	j >= nys .AND. j <= nyn ) THEN
[2270]	1348	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
	1349	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
	1350	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
	1351	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
	1352	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
	1353	sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
[2232]	1354	ENDIF
	1355	ENDDO
	1356	!$OMP END PARALLEL
	1357
	1358	tn = 0
	1359	!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
	1360	!$ tn = omp_get_thread_num()
	1361	!$OMP DO
	1362	DO m = 1, surf_lsm_h%ns
	1363
	1364	i = surf_lsm_h%i(m)
	1365	j = surf_lsm_h%j(m)
	1366
	1367	IF ( i >= nxl .AND. i <= nxr .AND. &
	1368	j >= nys .AND. j <= nyn ) THEN
	1369
	1370	DO k = nzb_soil, nzt_soil
	1371	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
	1372	* rmask(j,i,sr)
	1373	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
	1374	* rmask(j,i,sr)
	1375	ENDDO
	1376	ENDIF
	1377	ENDDO
	1378	!$OMP END PARALLEL
	1379	ENDIF
	1380	!
[709]	1381	!-- For speed optimization fluxes which have been computed in part directly
	1382	!-- inside the WS advection routines are treated seperatly
	1383	!-- Momentum fluxes first:
[2232]	1384
	1385	tn = 0
	1386	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	1387	!$ tn = omp_get_thread_num()
[743]	1388	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
[2232]	1389	!$OMP DO
	1390	DO i = nxl, nxr
	1391	DO j = nys, nyn
	1392	DO k = nzb, nzt
[1007]	1393	!
[2232]	1394	!-- Flag 23 is used to mask surface fluxes as well as model-top
	1395	!-- fluxes, which are added further below.
	1396	flag = MERGE( 1.0_wp, 0.0_wp, &
	1397	BTEST( wall_flags_0(k,j,i), 23 ) ) * &
	1398	MERGE( 1.0_wp, 0.0_wp, &
	1399	BTEST( wall_flags_0(k,j,i), 9 ) )
	1400
	1401	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1402	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1403	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1404	v(k+1,j,i) - hom(k+1,1,2,sr) )
[667]	1405	!
[2232]	1406	!-- Momentum flux wu
	1407	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
	1408	( w(k,j,i-1) + w(k,j,i) ) &
[2674]	1409	* rho_air_zw(k) &
[2232]	1410	* momentumflux_output_conversion(k) &
	1411	* ust * rmask(j,i,sr) &
	1412	* flag
	1413	!
	1414	!-- Momentum flux wv
	1415	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
	1416	( w(k,j-1,i) + w(k,j,i) ) &
[2674]	1417	* rho_air_zw(k) &
[2232]	1418	* momentumflux_output_conversion(k) &
	1419	* vst * rmask(j,i,sr) &
	1420	* flag
	1421	ENDDO
	1422	ENDDO
	1423	ENDDO
[1]	1424
[667]	1425	ENDIF
[1567]	1426	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[2232]	1427	!$OMP DO
	1428	DO i = nxl, nxr
	1429	DO j = nys, nyn
	1430	DO k = nzb, nzt
	1431	flag = MERGE( 1.0_wp, 0.0_wp, &
	1432	BTEST( wall_flags_0(k,j,i), 23 ) ) * &
	1433	MERGE( 1.0_wp, 0.0_wp, &
	1434	BTEST( wall_flags_0(k,j,i), 9 ) )
[709]	1435	!
[2232]	1436	!-- Vertical heat flux
	1437	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
[1353]	1438	( pt(k,j,i) - hom(k,1,4,sr) + &
	1439	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
[4039]	1440	* rho_air_zw(k) &
[2037]	1441	* heatflux_output_conversion(k) &
[2232]	1442	* w(k,j,i) * rmask(j,i,sr) * flag
	1443	IF ( humidity ) THEN
	1444	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
[1353]	1445	q(k+1,j,i) - hom(k+1,1,41,sr) )
[2232]	1446	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
[4039]	1447	rho_air_zw(k) * &
[2037]	1448	waterflux_output_conversion(k) * &
[2232]	1449	rmask(j,i,sr) * flag
	1450	ENDIF
	1451	IF ( passive_scalar ) THEN
[2270]	1452	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1453	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1454	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1455	rmask(j,i,sr) * flag
	1456	ENDIF
	1457	ENDDO
	1458	ENDDO
	1459	ENDDO
[667]	1460
	1461	ENDIF
	1462
[1]	1463	!
[97]	1464	!-- Density at top follows Neumann condition
[3294]	1465	IF ( ocean_mode ) THEN
[388]	1466	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
	1467	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
	1468	ENDIF
[97]	1469
	1470	!
[1]	1471	!-- Divergence of vertical flux of resolved scale energy and pressure
[106]	1472	!-- fluctuations as well as flux of pressure fluctuation itself (68).
	1473	!-- First calculate the products, then the divergence.
[1]	1474	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
[1691]	1475	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
	1476	THEN
[1353]	1477	sums_ll = 0.0_wp ! local array
[1]	1478
	1479	!$OMP DO
	1480	DO i = nxl, nxr
	1481	DO j = nys, nyn
[2232]	1482	DO k = nzb+1, nzt
	1483	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
[1]	1484
[1353]	1485	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
[1652]	1486	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
	1487	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
	1488	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
[1654]	1489	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
[2232]	1490	+ w(k,j,i)*2 ) flag
[1]	1491
[1353]	1492	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
[2252]	1493	* ( ( p(k,j,i) + p(k+1,j,i) ) &
	1494	/ momentumflux_output_conversion(k) ) &
	1495	* flag
[1]	1496
	1497	ENDDO
	1498	ENDDO
	1499	ENDDO
[1353]	1500	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
	1501	sums_ll(nzt+1,1) = 0.0_wp
	1502	sums_ll(0,2) = 0.0_wp
	1503	sums_ll(nzt+1,2) = 0.0_wp
[1]	1504
[678]	1505	DO k = nzb+1, nzt
[1]	1506	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
	1507	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
[106]	1508	sums_l(k,68,tn) = sums_ll(k,2)
[1]	1509	ENDDO
	1510	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
	1511	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
[1353]	1512	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
[1]	1513
	1514	ENDIF
	1515
	1516	!
[106]	1517	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
[1691]	1518	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
	1519	THEN
[1]	1520	!$OMP DO
	1521	DO i = nxl, nxr
	1522	DO j = nys, nyn
[2232]	1523	DO k = nzb+1, nzt
[1]	1524
[2232]	1525	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
	1526
[1353]	1527	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
[1]	1528	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
	1529	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
[2232]	1530	) * ddzw(k) &
	1531	* flag
[1]	1532
[1353]	1533	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
[106]	1534	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
[2232]	1535	) * flag
[106]	1536
[1]	1537	ENDDO
	1538	ENDDO
	1539	ENDDO
	1540	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
[106]	1541	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
[1]	1542
	1543	ENDIF
	1544
	1545	!
	1546	!-- Horizontal heat fluxes (subgrid, resolved, total).
	1547	!-- Do it only, if profiles shall be plotted.
[1353]	1548	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
[1]	1549
	1550	!$OMP DO
	1551	DO i = nxl, nxr
	1552	DO j = nys, nyn
[2232]	1553	DO k = nzb+1, nzt
	1554	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
[1]	1555	!
	1556	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
[1353]	1557	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
[1]	1558	( kh(k,j,i) + kh(k,j,i-1) ) &
	1559	* ( pt(k,j,i-1) - pt(k,j,i) ) &
[2037]	1560	* rho_air_zw(k) &
	1561	* heatflux_output_conversion(k) &
[2232]	1562	* ddx * rmask(j,i,sr) * flag
[1353]	1563	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
[1]	1564	( kh(k,j,i) + kh(k,j-1,i) ) &
	1565	* ( pt(k,j-1,i) - pt(k,j,i) ) &
[2037]	1566	* rho_air_zw(k) &
	1567	* heatflux_output_conversion(k) &
[2232]	1568	* ddy * rmask(j,i,sr) * flag
[1]	1569	!
	1570	!-- Resolved horizontal heat fluxes upt, vpt
	1571	sums_l(k,59,tn) = sums_l(k,59,tn) + &
	1572	( u(k,j,i) - hom(k,1,1,sr) ) &
[1353]	1573	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
[2037]	1574	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1575	* heatflux_output_conversion(k) &
	1576	* flag
[1353]	1577	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
	1578	pt(k,j,i) - hom(k,1,4,sr) )
[1]	1579	sums_l(k,62,tn) = sums_l(k,62,tn) + &
	1580	( v(k,j,i) - hom(k,1,2,sr) ) &
[1353]	1581	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
[2037]	1582	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1583	* heatflux_output_conversion(k) &
	1584	* flag
[1]	1585	ENDDO
	1586	ENDDO
	1587	ENDDO
	1588	!
	1589	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
[1353]	1590	sums_l(nzb,58,tn) = 0.0_wp
	1591	sums_l(nzb,59,tn) = 0.0_wp
	1592	sums_l(nzb,60,tn) = 0.0_wp
	1593	sums_l(nzb,61,tn) = 0.0_wp
	1594	sums_l(nzb,62,tn) = 0.0_wp
	1595	sums_l(nzb,63,tn) = 0.0_wp
[1]	1596
	1597	ENDIF
[2073]	1598	!$OMP END PARALLEL
[87]	1599
	1600	!
[1365]	1601	!-- Collect current large scale advection and subsidence tendencies for
	1602	!-- data output
[1691]	1603	IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
[1365]	1604	!
	1605	!-- Interpolation in time of LSF_DATA
	1606	nt = 1
[1386]	1607	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
[1365]	1608	nt = nt + 1
	1609	ENDDO
[1386]	1610	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
[1365]	1611	nt = nt - 1
	1612	ENDIF
	1613
[1386]	1614	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
[1365]	1615	/ ( time_vert(nt+1)-time_vert(nt) )
	1616
	1617
	1618	DO k = nzb, nzt
[1382]	1619	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
	1620	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
	1621	sums_ls_l(k,1) = td_lsa_q(k,nt) &
	1622	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
[1365]	1623	ENDDO
	1624
[1382]	1625	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
	1626	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
	1627
[1365]	1628	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
	1629
	1630	DO k = nzb, nzt
[1382]	1631	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
	1632	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
	1633	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
	1634	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
[1365]	1635	ENDDO
	1636
[1382]	1637	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
	1638	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
	1639
[1365]	1640	ENDIF
	1641
	1642	ENDIF
	1643
[2232]	1644	tn = 0
[2073]	1645	!$OMP PARALLEL PRIVATE( i, j, k, tn )
[2232]	1646	!$ tn = omp_get_thread_num()
[1585]	1647	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
	1648	!$OMP DO
	1649	DO i = nxl, nxr
	1650	DO j = nys, nyn
[2232]	1651	DO k = nzb+1, nzt+1
	1652	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
	1653
[2270]	1654	sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
[2232]	1655	* rmask(j,i,sr) * flag
[2270]	1656	sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
[2232]	1657	* rmask(j,i,sr) * flag
[2270]	1658	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
[2232]	1659	* rmask(j,i,sr) * flag
[2270]	1660	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
[2232]	1661	* rmask(j,i,sr) * flag
[2270]	1662	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
[2232]	1663	* rmask(j,i,sr) * flag
[2270]	1664	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
[2232]	1665	* rmask(j,i,sr) * flag
[2270]	1666	sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
[2232]	1667	* rmask(j,i,sr) * flag
[2270]	1668	sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
[2232]	1669	* rmask(j,i,sr) * flag
[1585]	1670	ENDDO
	1671	ENDDO
	1672	ENDDO
	1673	ENDIF
[3637]	1674
[1365]	1675	!
[3637]	1676	!-- Calculate the profiles for all other modules
	1677	CALL module_interface_statistics( 'profiles', sr, tn, dots_max )
[3651]	1678	!$OMP END PARALLEL
[1]	1679
	1680	!
	1681	!-- Summation of thread sums
	1682	IF ( threads_per_task > 1 ) THEN
	1683	DO i = 1, threads_per_task-1
	1684	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
	1685	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
[87]	1686	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
	1687	sums_l(:,45:pr_palm,i)
	1688	IF ( max_pr_user > 0 ) THEN
	1689	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
	1690	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
	1691	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
	1692	ENDIF
[3298]	1693
	1694	IF ( air_chemistry ) THEN
	1695	IF ( max_pr_cs > 0 ) THEN
	1696	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+ max_pr_cs,0) = &
	1697	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,0) + &
	1698	sums_l(:,pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs,i)
	1699
	1700	ENDIF
	1701	ENDIF
[4131]	1702	IF ( salsa ) THEN
	1703	IF ( max_pr_cs > 0 ) THEN
	1704	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) = &
	1705	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0) + &
	1706	sums_l(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,i)
	1707
	1708	ENDIF
	1709	ENDIF
[1]	1710	ENDDO
	1711	ENDIF
	1712
	1713	#if defined( __parallel )
[667]	1714
[1]	1715	!
	1716	!-- Compute total sum from local sums
[622]	1717	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1365]	1718	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
[1]	1719	MPI_SUM, comm2d, ierr )
[1365]	1720	IF ( large_scale_forcing ) THEN
	1721	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
	1722	MPI_REAL, MPI_SUM, comm2d, ierr )
	1723	ENDIF
[3298]	1724
[3458]	1725	IF ( air_chemistry .AND. max_pr_cs > 0 ) THEN
[3298]	1726	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[3458]	1727	DO i = 1, max_pr_cs
	1728	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+i,0), &
	1729	sums(nzb,pr_palm+max_pr_user+i), &
	1730	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
	1731	ENDDO
[3298]	1732	ENDIF
	1733
[4131]	1734	IF ( salsa .AND. max_pr_salsa > 0 ) THEN
	1735	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
	1736	DO i = 1, max_pr_salsa
	1737	CALL MPI_ALLREDUCE( sums_l(nzb,pr_palm+max_pr_user+max_pr_cs+i,0), &
	1738	sums(nzb,pr_palm+max_pr_user+max_pr_user+i), &
	1739	nzt+2-nzb, MPI_REAL, MPI_SUM, comm2d, ierr )
	1740	ENDDO
	1741	ENDIF
	1742
[1]	1743	#else
	1744	sums = sums_l(:,:,0)
[1365]	1745	IF ( large_scale_forcing ) THEN
	1746	sums(:,81:88) = sums_ls_l
	1747	ENDIF
[1]	1748	#endif
	1749
	1750	!
	1751	!-- Final values are obtained by division by the total number of grid points
	1752	!-- used for summation. After that store profiles.
[1738]	1753	!-- Check, if statistical regions do contain at least one grid point at the
	1754	!-- respective k-level, otherwise division by zero will lead to undefined
	1755	!-- values, which may cause e.g. problems with NetCDF output
[1]	1756	!-- Profiles:
	1757	DO k = nzb, nzt+1
[1738]	1758	sums(k,3) = sums(k,3) / ngp_2dh(sr)
	1759	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
	1760	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
	1761	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
	1762	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
	1763	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
	1764	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
[2270]	1765	sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
	1766	sums(k,114) = sums(k,114) / ngp_2dh(sr)
	1767	sums(k,117) = sums(k,117) / ngp_2dh(sr)
[1738]	1768	IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
	1769	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
	1770	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
	1771	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
	1772	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
	1773	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
	1774	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
	1775	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
[2270]	1776	sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
	1777	sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
[3452]	1778	sums(k,123) = sums(k,123) * ngp_2dh_s_inner(k,sr) / ngp_2dh(sr)
[1738]	1779	ENDIF
[1]	1780	ENDDO
[667]	1781
[1]	1782	!-- u* and so on
[87]	1783	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
[1]	1784	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
	1785	!-- above the topography, they are being divided by ngp_2dh(sr)
[87]	1786	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
[1]	1787	ngp_2dh(sr)
[197]	1788	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
	1789	ngp_2dh(sr)
[1960]	1790	sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
	1791	ngp_2dh(sr)
[2773]	1792	sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
	1793	ngp_2dh(sr)
[1]	1794	!-- eges, e*
[87]	1795	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
[132]	1796	ngp_3d(sr)
[1]	1797	!-- Old and new divergence
[87]	1798	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
[1]	1799	ngp_3d_inner(sr)
	1800
[87]	1801	!-- User-defined profiles
	1802	IF ( max_pr_user > 0 ) THEN
	1803	DO k = nzb, nzt+1
	1804	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
	1805	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
[132]	1806	ngp_2dh_s_inner(k,sr)
[87]	1807	ENDDO
	1808	ENDIF
[1007]	1809
[3298]	1810	IF ( air_chemistry ) THEN
	1811	IF ( max_pr_cs > 0 ) THEN
	1812	DO k = nzb, nzt+1
	1813	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) = &
	1814	sums(k, pr_palm+1:pr_palm+max_pr_user+max_pr_cs) / &
	1815	ngp_2dh_s_inner(k,sr)
	1816	ENDDO
	1817	ENDIF
	1818	ENDIF
	1819
[4131]	1820	IF ( salsa ) THEN
	1821	IF ( max_pr_salsa > 0 ) THEN
	1822	DO k = nzb, nzt+1
	1823	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) = &
	1824	sums(k,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa) &
	1825	/ ngp_2dh_s_inner(k,sr)
	1826	ENDDO
	1827	ENDIF
	1828	ENDIF
	1829
[1]	1830	!
	1831	!-- Collect horizontal average in hom.
	1832	!-- Compute deduced averages (e.g. total heat flux)
	1833	hom(:,1,3,sr) = sums(:,3) ! w
	1834	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
	1835	hom(:,1,9,sr) = sums(:,9) ! km
	1836	hom(:,1,10,sr) = sums(:,10) ! kh
	1837	hom(:,1,11,sr) = sums(:,11) ! l
	1838	hom(:,1,12,sr) = sums(:,12) ! w"u"
	1839	hom(:,1,13,sr) = sums(:,13) ! wu
	1840	hom(:,1,14,sr) = sums(:,14) ! w"v"
	1841	hom(:,1,15,sr) = sums(:,15) ! wv
	1842	hom(:,1,16,sr) = sums(:,16) ! w"pt"
	1843	hom(:,1,17,sr) = sums(:,17) ! wpt
	1844	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
	1845	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
	1846	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
	1847	hom(:,1,21,sr) = sums(:,21) ! wptBC
	1848	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
[96]	1849	! profile 24 is initial profile (sa)
	1850	! profiles 25-29 left empty for initial
[1]	1851	! profiles
	1852	hom(:,1,30,sr) = sums(:,30) ! u*2
	1853	hom(:,1,31,sr) = sums(:,31) ! v*2
	1854	hom(:,1,32,sr) = sums(:,32) ! w*2
	1855	hom(:,1,33,sr) = sums(:,33) ! pt*2
	1856	hom(:,1,34,sr) = sums(:,34) ! e*
	1857	hom(:,1,35,sr) = sums(:,35) ! w2pt
	1858	hom(:,1,36,sr) = sums(:,36) ! wpt2
	1859	hom(:,1,37,sr) = sums(:,37) ! we
	1860	hom(:,1,38,sr) = sums(:,38) ! w*3
[1353]	1861	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
[1]	1862	hom(:,1,40,sr) = sums(:,40) ! p
[531]	1863	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
[1]	1864	hom(:,1,46,sr) = sums(:,46) ! wvpt
	1865	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
	1866	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
	1867	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
	1868	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
	1869	hom(:,1,51,sr) = sums(:,51) ! w"qv"
	1870	hom(:,1,52,sr) = sums(:,52) ! wqv
	1871	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
	1872	hom(:,1,54,sr) = sums(:,54) ! ql
	1873	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
	1874	hom(:,1,56,sr) = sums(:,56) ! wp/dz
[2031]	1875	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
[1]	1876	hom(:,1,58,sr) = sums(:,58) ! u"pt"
	1877	hom(:,1,59,sr) = sums(:,59) ! upt
	1878	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
	1879	hom(:,1,61,sr) = sums(:,61) ! v"pt"
	1880	hom(:,1,62,sr) = sums(:,62) ! vpt
	1881	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
[2031]	1882	hom(:,1,64,sr) = sums(:,64) ! rho_ocean
[96]	1883	hom(:,1,65,sr) = sums(:,65) ! w"sa"
	1884	hom(:,1,66,sr) = sums(:,66) ! wsa
	1885	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
[106]	1886	hom(:,1,68,sr) = sums(:,68) ! wp
[2031]	1887	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
[197]	1888	hom(:,1,70,sr) = sums(:,70) ! q*2
[388]	1889	hom(:,1,71,sr) = sums(:,71) ! prho
[2252]	1890	hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
[2292]	1891	hom(:,1,123,sr) = sums(:,123) ! nc
[1053]	1892	hom(:,1,73,sr) = sums(:,73) ! nr
	1893	hom(:,1,74,sr) = sums(:,74) ! qr
	1894	hom(:,1,75,sr) = sums(:,75) ! qc
	1895	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
[1179]	1896	! 77 is initial density profile
[1241]	1897	hom(:,1,78,sr) = ug ! ug
	1898	hom(:,1,79,sr) = vg ! vg
[1299]	1899	hom(:,1,80,sr) = w_subs ! w_subs
[1]	1900
[1365]	1901	IF ( large_scale_forcing ) THEN
[1382]	1902	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
	1903	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
[1365]	1904	IF ( use_subsidence_tendencies ) THEN
[1382]	1905	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
	1906	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
[1365]	1907	ELSE
[1382]	1908	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
	1909	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
[1365]	1910	ENDIF
[1382]	1911	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
	1912	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
	1913	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
	1914	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
[1365]	1915	ENDIF
	1916
[1551]	1917	IF ( land_surface ) THEN
	1918	hom(:,1,89,sr) = sums(:,89) ! t_soil
	1919	! 90 is initial t_soil profile
	1920	hom(:,1,91,sr) = sums(:,91) ! m_soil
	1921	! 92 is initial m_soil profile
[2270]	1922	hom(:,1,93,sr) = sums(:,93) ! ghf
	1923	hom(:,1,94,sr) = sums(:,94) ! qsws_liq
	1924	hom(:,1,95,sr) = sums(:,95) ! qsws_soil
	1925	hom(:,1,96,sr) = sums(:,96) ! qsws_veg
	1926	hom(:,1,97,sr) = sums(:,97) ! r_a
	1927	hom(:,1,98,sr) = sums(:,98) ! r_s
[1555]	1928
[1551]	1929	ENDIF
	1930
	1931	IF ( radiation ) THEN
[2270]	1932	hom(:,1,99,sr) = sums(:,99) ! rad_net
	1933	hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
	1934	hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
	1935	hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
	1936	hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
[1585]	1937
[1691]	1938	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	1939	hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
	1940	hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
	1941	hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
	1942	hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
[1691]	1943
[2270]	1944	hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
	1945	hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
	1946	hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
	1947	hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
[1585]	1948	ENDIF
[1551]	1949	ENDIF
	1950
[2270]	1951	hom(:,1,112,sr) = sums(:,112) !: L
[1691]	1952
[1960]	1953	IF ( passive_scalar ) THEN
[2270]	1954	hom(:,1,117,sr) = sums(:,117) ! w"s"
	1955	hom(:,1,114,sr) = sums(:,114) ! ws
	1956	hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
	1957	hom(:,1,116,sr) = sums(:,116) ! s*2
[1960]	1958	ENDIF
	1959
[2270]	1960	hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
	1961	hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
[2037]	1962
[667]	1963	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
[1]	1964	! u, w'u', w'v', t (in last profile)
	1965
[87]	1966	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
	1967	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
	1968	sums(:,pr_palm+1:pr_palm+max_pr_user)
	1969	ENDIF
	1970
[3298]	1971	IF ( air_chemistry ) THEN
	1972	IF ( max_pr_cs > 0 ) THEN ! chem_spcs profiles
	1973	hom(:, 1, pr_palm+max_pr_user+1:pr_palm + max_pr_user+max_pr_cs, sr) = &
	1974	sums(:, pr_palm+max_pr_user+1:pr_palm+max_pr_user+max_pr_cs)
	1975	ENDIF
	1976	ENDIF
[4131]	1977
	1978	IF ( salsa ) THEN
	1979	IF ( max_pr_salsa > 0 ) THEN ! salsa profiles
	1980	hom(:,1,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa, sr) = &
	1981	sums(:,pr_palm+max_pr_user+max_pr_cs+1:pr_palm+max_pr_user+max_pr_cs+max_pr_salsa)
	1982	ENDIF
	1983	ENDIF
[1]	1984	!
	1985	!-- Determine the boundary layer height using two different schemes.
[94]	1986	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
	1987	!-- first relative minimum (maximum) of the total heat flux.
	1988	!-- The corresponding height is assumed as the boundary layer height, if it
	1989	!-- is less than 1.5 times the height where the heat flux becomes negative
[3004]	1990	!-- (positive) for the first time. Attention: the resolved vertical sensible
	1991	!-- heat flux (hom(:,1,17,sr) = wpt) is not known at the beginning because
	1992	!-- the calculation happens in advec_s_ws which is called after
	1993	!-- flow_statistics. Therefore z_i is directly taken from restart data at
	1994	!-- the beginning of restart runs.
[3003]	1995	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .OR. &
	1996	simulated_time_at_begin /= simulated_time ) THEN
[667]	1997
[3003]	1998	z_i(1) = 0.0_wp
	1999	first = .TRUE.
	2000
[3294]	2001	IF ( ocean_mode ) THEN
[3003]	2002	DO k = nzt, nzb+1, -1
	2003	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2004	first = .FALSE.
	2005	height = zw(k)
[97]	2006	ENDIF
[3003]	2007	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2008	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2009	IF ( zw(k) < 1.5_wp * height ) THEN
	2010	z_i(1) = zw(k)
	2011	ELSE
	2012	z_i(1) = height
	2013	ENDIF
	2014	EXIT
[94]	2015	ENDIF
[3003]	2016	ENDDO
	2017	ELSE
	2018	DO k = nzb, nzt-1
	2019	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
	2020	first = .FALSE.
	2021	height = zw(k)
	2022	ENDIF
	2023	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
	2024	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
	2025	IF ( zw(k) < 1.5_wp * height ) THEN
	2026	z_i(1) = zw(k)
	2027	ELSE
	2028	z_i(1) = height
	2029	ENDIF
	2030	EXIT
	2031	ENDIF
	2032	ENDDO
	2033	ENDIF
[1]	2034
	2035	!
[3003]	2036	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
	2037	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
	2038	!-- maximal local temperature gradient: starting from the second (the
	2039	!-- last but one) vertical gridpoint, the local gradient must be at least
	2040	!-- 0.2K/100m and greater than the next four gradients.
	2041	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
	2042	!-- ocean case!
	2043	z_i(2) = 0.0_wp
	2044	DO k = nzb+1, nzt+1
	2045	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
	2046	ENDDO
	2047	dptdz_threshold = 0.2_wp / 100.0_wp
[291]	2048
[3294]	2049	IF ( ocean_mode ) THEN
[3003]	2050	DO k = nzt+1, nzb+5, -1
	2051	IF ( dptdz(k) > dptdz_threshold .AND. &
	2052	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND.&
	2053	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
	2054	z_i(2) = zw(k-1)
	2055	EXIT
	2056	ENDIF
	2057	ENDDO
	2058	ELSE
	2059	DO k = nzb+1, nzt-3
	2060	IF ( dptdz(k) > dptdz_threshold .AND. &
	2061	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND.&
	2062	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
	2063	z_i(2) = zw(k-1)
	2064	EXIT
	2065	ENDIF
	2066	ENDDO
	2067	ENDIF
	2068
[97]	2069	ENDIF
[1]	2070
[87]	2071	hom(nzb+6,1,pr_palm,sr) = z_i(1)
	2072	hom(nzb+7,1,pr_palm,sr) = z_i(2)
[1]	2073
	2074	!
[1738]	2075	!-- Determine vertical index which is nearest to the mean surface level
	2076	!-- height of the respective statistic region
	2077	DO k = nzb, nzt
	2078	IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
	2079	k_surface_level = k
	2080	EXIT
	2081	ENDIF
	2082	ENDDO
[3003]	2083
[1738]	2084	!
[1]	2085	!-- Computation of both the characteristic vertical velocity and
	2086	!-- the characteristic convective boundary layer temperature.
[1738]	2087	!-- The inversion height entering into the equation is defined with respect
	2088	!-- to the mean surface level height of the respective statistic region.
	2089	!-- The horizontal average at surface level index + 1 is input for the
	2090	!-- average temperature.
	2091	IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
	2092	THEN
[2252]	2093	hom(nzb+8,1,pr_palm,sr) = &
[2037]	2094	( g / hom(k_surface_level+1,1,4,sr) * &
[2252]	2095	( hom(k_surface_level,1,18,sr) / &
	2096	( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
[1738]	2097	* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
[1]	2098	ELSE
[1353]	2099	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
[1]	2100	ENDIF
	2101
[48]	2102	!
[2968]	2103	!-- Collect the time series quantities. Please note, timeseries quantities
	2104	!-- which are collected from horizontally averaged profiles, e.g. wpt
	2105	!-- or pt(zp), are treated specially. In case of elevated model surfaces,
	2106	!-- index nzb+1 might be within topography and data will be zero. Therefore,
	2107	!-- take value for the first atmosphere index, which is topo_min_level+1.
	2108	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
	2109	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
[48]	2110	ts_value(3,sr) = dt_3d
[2968]	2111	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
	2112	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
[48]	2113	ts_value(6,sr) = u_max
	2114	ts_value(7,sr) = v_max
	2115	ts_value(8,sr) = w_max
[2968]	2116	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
	2117	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
	2118	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
	2119	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
	2120	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
	2121	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
	2122	ts_value(15,sr) = hom(topo_min_level+1,1,16,sr) ! w'pt' at k=1
	2123	ts_value(16,sr) = hom(topo_min_level+1,1,18,sr) ! wpt at k=1
	2124	ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
	2125	ts_value(18,sr) = hom(topo_min_level+1,1,4,sr) ! pt(zp)
	2126	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
	2127	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
	2128	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
[1709]	2129
	2130	IF ( .NOT. neutral ) THEN
[2270]	2131	ts_value(22,sr) = hom(nzb,1,112,sr) ! L
[48]	2132	ELSE
[1709]	2133	ts_value(22,sr) = 1.0E10_wp
[48]	2134	ENDIF
[1]	2135
[343]	2136	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
[1551]	2137
[1960]	2138	IF ( passive_scalar ) THEN
[2270]	2139	ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
[1960]	2140	ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
	2141	ENDIF
	2142
[1]	2143	!
[1551]	2144	!-- Collect land surface model timeseries
	2145	IF ( land_surface ) THEN
[2270]	2146	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
	2147	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
	2148	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
	2149	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
	2150	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
	2151	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
[1551]	2152	ENDIF
	2153	!
	2154	!-- Collect radiation model timeseries
	2155	IF ( radiation ) THEN
[2270]	2156	ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
	2157	ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
	2158	ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
	2159	ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
	2160	ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
[1585]	2161
	2162	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	2163	ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
	2164	ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
	2165	ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
	2166	ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
[1585]	2167	ENDIF
	2168
[1551]	2169	ENDIF
	2170
	2171	!
[3637]	2172	!-- Calculate additional statistics provided by other modules
	2173	CALL module_interface_statistics( 'time_series', sr, 0, dots_max )
[2817]	2174
[48]	2175	ENDDO ! loop of the subregions
	2176
[1]	2177	!
[1918]	2178	!-- If required, sum up horizontal averages for subsequent time averaging.
	2179	!-- Do not sum, if flow statistics is called before the first initial time step.
	2180	IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
[1353]	2181	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
[1]	2182	hom_sum = hom_sum + hom(:,1,:,:)
	2183	average_count_pr = average_count_pr + 1
	2184	do_sum = .FALSE.
	2185	ENDIF
	2186
	2187	!
	2188	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
	2189	!-- This flag is reset after each time step in time_integration.
	2190	flow_statistics_called = .TRUE.
	2191
	2192	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
	2193
	2194
	2195	END SUBROUTINE flow_statistics

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |