Home

Context Navigation

source: palm/trunk/SOURCE/flow_statistics.f90 @ 2809

Last change on this file since 2809 was 2773, checked in by suehring, 7 years ago
Nesting for chemical species implemented; Bugfix passive scalar boundary condition after anterpolation; Timeseries output of surface temperature; Enable initialization of 3D topography (was commented out so far)
Property svn:keywords set to `Id`
File size: 102.8 KB

Rev	Line
[1682]	1	!> @file flow_statistics.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2718]	17	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[1961]	22	!
[2233]	23	!
[1739]	24	! Former revisions:
	25	! -----------------
	26	! $Id: flow_statistics.f90 2773 2018-01-30 14:12:54Z schwenkel $
[2773]	27	! Timeseries output of surface temperature.
	28	!
	29	! 2753 2018-01-16 14:16:49Z suehring
[2753]	30	! Tile approach for spectral albedo implemented.
	31	!
	32	! 2718 2018-01-02 08:49:38Z maronga
[2716]	33	! Corrected "Former revisions" section
	34	!
	35	! 2696 2017-12-14 17:12:51Z kanani
	36	! Change in file header (GPL part)
[2696]	37	! Bugfix in evaluation of surface quantities in case different surface types
	38	! are used (MS)
	39	!
	40	! 2674 2017-12-07 11:49:21Z suehring
[2674]	41	! Bugfix in output conversion of resolved-scale momentum fluxes in case of
	42	! PW advections scheme.
	43	!
	44	! 2320 2017-07-21 12:47:43Z suehring
[2320]	45	! Modularize large-scale forcing and nudging
	46	!
	47	! 2296 2017-06-28 07:53:56Z maronga
[2296]	48	! Enabled output of radiation quantities for radiation_scheme = 'constant'
	49	!
	50	! 2292 2017-06-20 09:51:42Z schwenkel
[2292]	51	! Implementation of new microphysic scheme: cloud_scheme = 'morrison'
	52	! includes two more prognostic equations for cloud drop concentration (nc)
	53	! and cloud water content (qc).
	54	!
	55	! 2270 2017-06-09 12:18:47Z maronga
[2270]	56	! Revised numbering (removed 2 timeseries)
	57	!
	58	! 2252 2017-06-07 09:35:37Z knoop
[2252]	59	! perturbation pressure now depending on flux_output_mode
	60	!
	61	! 2233 2017-05-30 18:08:54Z suehring
[1739]	62	!
[2233]	63	! 2232 2017-05-30 17:47:52Z suehring
	64	! Adjustments to new topography and surface concept
	65	!
[2119]	66	! 2118 2017-01-17 16:38:49Z raasch
	67	! OpenACC version of subroutine removed
	68	!
[2074]	69	! 2073 2016-11-30 14:34:05Z raasch
	70	! openmp bugfix: large scale forcing calculations cannot be executed thread
	71	! parallel
	72	!
[2038]	73	! 2037 2016-10-26 11:15:40Z knoop
	74	! Anelastic approximation implemented
	75	!
[2032]	76	! 2031 2016-10-21 15:11:58Z knoop
	77	! renamed variable rho to rho_ocean
	78	!
[2027]	79	! 2026 2016-10-18 10:27:02Z suehring
	80	! Bugfix, enable output of s*2.
	81	! Change, calculation of domain-averaged perturbation energy.
	82	! Some formatting adjustments.
	83	!
[2001]	84	! 2000 2016-08-20 18:09:15Z knoop
	85	! Forced header and separation lines into 80 columns
	86	!
[1977]	87	! 1976 2016-07-27 13:28:04Z maronga
	88	! Removed some unneeded __rrtmg preprocessor directives
	89	!
[1961]	90	! 1960 2016-07-12 16:34:24Z suehring
	91	! Separate humidity and passive scalar
	92	!
[1919]	93	! 1918 2016-05-27 14:35:57Z raasch
	94	! in case of Wicker-Skamarock scheme, calculate disturbance kinetic energy here,
	95	! if flow_statistics is called before the first initial time step
	96	!
[1854]	97	! 1853 2016-04-11 09:00:35Z maronga
	98	! Adjusted for use with radiation_scheme = constant
	99	!
[1851]	100	! 1849 2016-04-08 11:33:18Z hoffmann
	101	! prr moved to arrays_3d
	102	!
[1823]	103	! 1822 2016-04-07 07:49:42Z hoffmann
	104	! Output of bulk microphysics simplified.
	105	!
[1816]	106	! 1815 2016-04-06 13:49:59Z raasch
	107	! cpp-directives for intel openmp bug removed
	108	!
[1784]	109	! 1783 2016-03-06 18:36:17Z raasch
	110	! +module netcdf_interface
	111	!
[1748]	112	! 1747 2016-02-08 12:25:53Z raasch
	113	! small bugfixes for accelerator version
	114	!
[1739]	115	! 1738 2015-12-18 13:56:05Z raasch
[1738]	116	! bugfixes for calculations in statistical regions which do not contain grid
	117	! points in the lowest vertical levels, mean surface level height considered
	118	! in the calculation of the characteristic vertical velocity,
	119	! old upstream parts removed
[1383]	120	!
[1710]	121	! 1709 2015-11-04 14:47:01Z maronga
	122	! Updated output of Obukhov length
	123	!
[1692]	124	! 1691 2015-10-26 16:17:44Z maronga
	125	! Revised calculation of Obukhov length. Added output of radiative heating >
	126	! rates for RRTMG.
	127	!
[1683]	128	! 1682 2015-10-07 23:56:08Z knoop
	129	! Code annotations made doxygen readable
	130	!
[1659]	131	! 1658 2015-09-18 10:52:53Z raasch
	132	! bugfix: temporary reduction variables in the openacc branch are now
	133	! initialized to zero
	134	!
[1655]	135	! 1654 2015-09-17 09:20:17Z raasch
	136	! FORTRAN bugfix of r1652
	137	!
[1653]	138	! 1652 2015-09-17 08:12:24Z raasch
	139	! bugfix in calculation of energy production by turbulent transport of TKE
	140	!
[1594]	141	! 1593 2015-05-16 13:58:02Z raasch
	142	! FORTRAN errors removed from openacc branch
	143	!
[1586]	144	! 1585 2015-04-30 07:05:52Z maronga
	145	! Added output of timeseries and profiles for RRTMG
	146	!
[1572]	147	! 1571 2015-03-12 16:12:49Z maronga
	148	! Bugfix: output of rad_net and rad_sw_in
	149	!
[1568]	150	! 1567 2015-03-10 17:57:55Z suehring
	151	! Reverse modifications made for monotonic limiter.
	152	!
[1558]	153	! 1557 2015-03-05 16:43:04Z suehring
	154	! Adjustments for monotonic limiter
	155	!
[1556]	156	! 1555 2015-03-04 17:44:27Z maronga
	157	! Added output of r_a and r_s.
	158	!
[1552]	159	! 1551 2015-03-03 14:18:16Z maronga
	160	! Added suppport for land surface model and radiation model output.
	161	!
[1499]	162	! 1498 2014-12-03 14:09:51Z suehring
	163	! Comments added
	164	!
[1483]	165	! 1482 2014-10-18 12:34:45Z raasch
	166	! missing ngp_sums_ls added in accelerator version
	167	!
[1451]	168	! 1450 2014-08-21 07:31:51Z heinze
	169	! bugfix: calculate fac only for simulated_time >= 0.0
	170	!
[1397]	171	! 1396 2014-05-06 13:37:41Z raasch
	172	! bugfix: "copyin" replaced by "update device" in openacc-branch
	173	!
[1387]	174	! 1386 2014-05-05 13:55:30Z boeske
	175	! bugfix: simulated time before the last timestep is needed for the correct
	176	! calculation of the profiles of large scale forcing tendencies
	177	!
[1383]	178	! 1382 2014-04-30 12:15:41Z boeske
[1382]	179	! Renamed variables which store large scale forcing tendencies
	180	! pt_lsa -> td_lsa_lpt, pt_subs -> td_sub_lpt,
	181	! q_lsa -> td_lsa_q, q_subs -> td_sub_q,
	182	! added Neumann boundary conditions for profile data output of large scale
	183	! advection and subsidence terms at nzt+1
[1354]	184	!
[1375]	185	! 1374 2014-04-25 12:55:07Z raasch
	186	! bugfix: syntax errors removed from openacc-branch
	187	! missing variables added to ONLY-lists
	188	!
[1366]	189	! 1365 2014-04-22 15:03:56Z boeske
	190	! Output of large scale advection, large scale subsidence and nudging tendencies
	191	! +sums_ls_l, ngp_sums_ls, use_subsidence_tendencies
	192	!
[1354]	193	! 1353 2014-04-08 15:21:23Z heinze
	194	! REAL constants provided with KIND-attribute
	195	!
[1323]	196	! 1322 2014-03-20 16:38:49Z raasch
	197	! REAL constants defined as wp-kind
	198	!
[1321]	199	! 1320 2014-03-20 08:40:49Z raasch
[1320]	200	! ONLY-attribute added to USE-statements,
	201	! kind-parameters added to all INTEGER and REAL declaration statements,
	202	! kinds are defined in new module kinds,
	203	! revision history before 2012 removed,
	204	! comment fields (!:) to be used for variable explanations added to
	205	! all variable declaration statements
[1008]	206	!
[1300]	207	! 1299 2014-03-06 13:15:21Z heinze
	208	! Output of large scale vertical velocity w_subs
	209	!
[1258]	210	! 1257 2013-11-08 15:18:40Z raasch
	211	! openacc "end parallel" replaced by "end parallel loop"
	212	!
[1242]	213	! 1241 2013-10-30 11:36:58Z heinze
	214	! Output of ug and vg
	215	!
[1222]	216	! 1221 2013-09-10 08:59:13Z raasch
	217	! ported for openACC in separate #else branch
	218	!
[1182]	219	! 1179 2013-06-14 05:57:58Z raasch
	220	! comment for profile 77 added
	221	!
[1116]	222	! 1115 2013-03-26 18:16:16Z hoffmann
	223	! ql is calculated by calc_liquid_water_content
	224	!
[1112]	225	! 1111 2013-03-08 23:54:10Z raasch
	226	! openACC directive added
	227	!
[1054]	228	! 1053 2012-11-13 17:11:03Z hoffmann
[1112]	229	! additions for two-moment cloud physics scheme:
[1054]	230	! +nr, qr, qc, prr
	231	!
[1037]	232	! 1036 2012-10-22 13:43:42Z raasch
	233	! code put under GPL (PALM 3.9)
	234	!
[1008]	235	! 1007 2012-09-19 14:30:36Z franke
[1007]	236	! Calculation of buoyancy flux for humidity in case of WS-scheme is now using
	237	! turbulent fluxes of WS-scheme
	238	! Bugfix: Calculation of subgridscale buoyancy flux for humidity and cloud
	239	! droplets at nzb and nzt added
[700]	240	!
[802]	241	! 801 2012-01-10 17:30:36Z suehring
	242	! Calculation of turbulent fluxes in advec_ws is now thread-safe.
	243	!
[1]	244	! Revision 1.1 1997/08/11 06:15:17 raasch
	245	! Initial revision
	246	!
	247	!
	248	! Description:
	249	! ------------
[1682]	250	!> Compute average profiles and further average flow quantities for the different
	251	!> user-defined (sub-)regions. The region indexed 0 is the total model domain.
	252	!>
	253	!> @note For simplicity, nzb_s_inner and nzb_diff_s_inner are being used as a
	254	!> lower vertical index for k-loops for all variables, although strictly
	255	!> speaking the k-loops would have to be split up according to the staggered
	256	!> grid. However, this implies no error since staggered velocity components
	257	!> are zero at the walls and inside buildings.
[1]	258	!------------------------------------------------------------------------------!
[1682]	259	SUBROUTINE flow_statistics
	260
[1]	261
[1320]	262	USE arrays_3d, &
[2037]	263	ONLY: ddzu, ddzw, e, heatflux_output_conversion, hyp, km, kh, &
[2292]	264	momentumflux_output_conversion, nc, nr, p, prho, prr, pt, q, &
[2232]	265	qc, ql, qr, rho_air, rho_air_zw, rho_ocean, s, &
[2320]	266	sa, u, ug, v, vg, vpt, w, w_subs, waterflux_output_conversion, zw
[1320]	267
	268	USE cloud_parameters, &
[1849]	269	ONLY: l_d_cp, pt_d_t
[1320]	270
	271	USE control_parameters, &
[1551]	272	ONLY: average_count_pr, cloud_droplets, cloud_physics, do_sum, &
[2232]	273	dt_3d, g, humidity, kappa, land_surface, large_scale_forcing, &
[1691]	274	large_scale_subsidence, max_pr_user, message_string, neutral, &
[2292]	275	microphysics_morrison, microphysics_seifert, ocean, &
	276	passive_scalar, simulated_time, use_subsidence_tendencies, &
	277	use_surface_fluxes, use_top_fluxes, ws_scheme_mom, &
	278	ws_scheme_sca
[1320]	279
	280	USE cpulog, &
[1551]	281	ONLY: cpu_log, log_point
[1320]	282
	283	USE grid_variables, &
[1551]	284	ONLY: ddx, ddy
[1320]	285
	286	USE indices, &
[1551]	287	ONLY: ngp_2dh, ngp_2dh_s_inner, ngp_3d, ngp_3d_inner, ngp_sums, &
[2232]	288	ngp_sums_ls, nxl, nxr, nyn, nys, nzb, nzt, wall_flags_0
[1320]	289
	290	USE kinds
	291
[1551]	292	USE land_surface_model_mod, &
[2232]	293	ONLY: m_soil_h, nzb_soil, nzt_soil, t_soil_h
[1551]	294
[2320]	295	USE lsf_nudging_mod, &
	296	ONLY: td_lsa_lpt, td_lsa_q, td_sub_lpt, td_sub_q, time_vert
	297
[1783]	298	USE netcdf_interface, &
	299	ONLY: dots_rad, dots_soil
	300
[1]	301	USE pegrid
[1551]	302
	303	USE radiation_model_mod, &
[2696]	304	ONLY: radiation, radiation_scheme, &
[1691]	305	rad_lw_in, rad_lw_out, rad_lw_cs_hr, rad_lw_hr, &
	306	rad_sw_in, rad_sw_out, rad_sw_cs_hr, rad_sw_hr
[1585]	307
	308	#if defined ( __rrtmg )
	309	USE radiation_model_mod, &
	310	ONLY: rrtm_aldif, rrtm_aldir, rrtm_asdif, rrtm_asdir
	311	#endif
	312
[1]	313	USE statistics
	314
[2232]	315	USE surface_mod, &
	316	ONLY : surf_def_h, surf_lsm_h, surf_usm_h
[1691]	317
[2232]	318
[1]	319	IMPLICIT NONE
	320
[1682]	321	INTEGER(iwp) :: i !<
	322	INTEGER(iwp) :: j !<
	323	INTEGER(iwp) :: k !<
[2232]	324	INTEGER(iwp) :: ki !<
[1738]	325	INTEGER(iwp) :: k_surface_level !<
[2232]	326	INTEGER(iwp) :: m !< loop variable over all horizontal wall elements
	327	INTEGER(iwp) :: l !< loop variable over surface facing -- up- or downward-facing
[1682]	328	INTEGER(iwp) :: nt !<
	329	INTEGER(iwp) :: omp_get_thread_num !<
	330	INTEGER(iwp) :: sr !<
	331	INTEGER(iwp) :: tn !<
[2232]	332
[1682]	333	LOGICAL :: first !<
[1320]	334
[1682]	335	REAL(wp) :: dptdz_threshold !<
	336	REAL(wp) :: fac !<
[2232]	337	REAL(wp) :: flag !<
[1682]	338	REAL(wp) :: height !<
	339	REAL(wp) :: pts !<
	340	REAL(wp) :: sums_l_eper !<
	341	REAL(wp) :: sums_l_etot !<
	342	REAL(wp) :: ust !<
	343	REAL(wp) :: ust2 !<
	344	REAL(wp) :: u2 !<
	345	REAL(wp) :: vst !<
	346	REAL(wp) :: vst2 !<
	347	REAL(wp) :: v2 !<
	348	REAL(wp) :: w2 !<
	349	REAL(wp) :: z_i(2) !<
[1320]	350
[1682]	351	REAL(wp) :: dptdz(nzb+1:nzt+1) !<
	352	REAL(wp) :: sums_ll(nzb:nzt+1,2) !<
[1]	353
	354	CALL cpu_log( log_point(10), 'flow_statistics', 'start' )
	355
[1221]	356
[1]	357	!
	358	!-- To be on the safe side, check whether flow_statistics has already been
	359	!-- called once after the current time step
	360	IF ( flow_statistics_called ) THEN
[254]	361
[274]	362	message_string = 'flow_statistics is called two times within one ' // &
	363	'timestep'
[254]	364	CALL message( 'flow_statistics', 'PA0190', 1, 2, 0, 6, 0 )
[1007]	365
[1]	366	ENDIF
	367
	368	!
	369	!-- Compute statistics for each (sub-)region
	370	DO sr = 0, statistic_regions
	371
	372	!
	373	!-- Initialize (local) summation array
[1353]	374	sums_l = 0.0_wp
[1]	375
	376	!
	377	!-- Store sums that have been computed in other subroutines in summation
	378	!-- array
	379	sums_l(:,11,:) = sums_l_l(:,sr,:) ! mixing length from diffusivities
	380	!-- WARNING: next line still has to be adjusted for OpenMP
[2037]	381	sums_l(:,21,0) = sums_wsts_bc_l(:,sr) * &
	382	heatflux_output_conversion ! heat flux from advec_s_bc
[87]	383	sums_l(nzb+9,pr_palm,0) = sums_divold_l(sr) ! old divergence from pres
	384	sums_l(nzb+10,pr_palm,0) = sums_divnew_l(sr) ! new divergence from pres
[1]	385
[667]	386	!
[1498]	387	!-- When calcuating horizontally-averaged total (resolved- plus subgrid-
	388	!-- scale) vertical fluxes and velocity variances by using commonly-
	389	!-- applied Reynolds-based methods ( e.g. <w'pt'> = (w-<w>)*(pt-<pt>) )
	390	!-- in combination with the 5th order advection scheme, pronounced
	391	!-- artificial kinks could be observed in the vertical profiles near the
	392	!-- surface. Please note: these kinks were not related to the model truth,
	393	!-- i.e. these kinks are just related to an evaluation problem.
	394	!-- In order avoid these kinks, vertical fluxes and horizontal as well
	395	!-- vertical velocity variances are calculated directly within the advection
	396	!-- routines, according to the numerical discretization, to evaluate the
	397	!-- statistical quantities as they will appear within the prognostic
	398	!-- equations.
[667]	399	!-- Copy the turbulent quantities, evaluated in the advection routines to
[1498]	400	!-- the local array sums_l() for further computations.
[743]	401	IF ( ws_scheme_mom .AND. sr == 0 ) THEN
[696]	402
[1007]	403	!
[673]	404	!-- According to the Neumann bc for the horizontal velocity components,
	405	!-- the corresponding fluxes has to satisfiy the same bc.
	406	IF ( ocean ) THEN
[801]	407	sums_us2_ws_l(nzt+1,:) = sums_us2_ws_l(nzt,:)
[1007]	408	sums_vs2_ws_l(nzt+1,:) = sums_vs2_ws_l(nzt,:)
[673]	409	ENDIF
[696]	410
	411	DO i = 0, threads_per_task-1
[1007]	412	!
[696]	413	!-- Swap the turbulent quantities evaluated in advec_ws.
[2037]	414	sums_l(:,13,i) = sums_wsus_ws_l(:,i) &
	415	* momentumflux_output_conversion ! wu
	416	sums_l(:,15,i) = sums_wsvs_ws_l(:,i) &
	417	* momentumflux_output_conversion ! wv
[801]	418	sums_l(:,30,i) = sums_us2_ws_l(:,i) ! u*2
	419	sums_l(:,31,i) = sums_vs2_ws_l(:,i) ! v*2
	420	sums_l(:,32,i) = sums_ws2_ws_l(:,i) ! w*2
[1353]	421	sums_l(:,34,i) = sums_l(:,34,i) + 0.5_wp * &
[1320]	422	( sums_us2_ws_l(:,i) + sums_vs2_ws_l(:,i) + &
[801]	423	sums_ws2_ws_l(:,i) ) ! e*
[667]	424	ENDDO
[696]	425
[667]	426	ENDIF
[696]	427
[1567]	428	IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[696]	429
	430	DO i = 0, threads_per_task-1
[2037]	431	sums_l(:,17,i) = sums_wspts_ws_l(:,i) &
	432	* heatflux_output_conversion ! wpt
[1960]	433	IF ( ocean ) sums_l(:,66,i) = sums_wssas_ws_l(:,i) ! wsa
[2037]	434	IF ( humidity ) sums_l(:,49,i) = sums_wsqs_ws_l(:,i) &
	435	* waterflux_output_conversion ! wq
[2270]	436	IF ( passive_scalar ) sums_l(:,114,i) = sums_wsss_ws_l(:,i) ! ws
[696]	437	ENDDO
	438
[667]	439	ENDIF
[305]	440	!
[1]	441	!-- Horizontally averaged profiles of horizontal velocities and temperature.
	442	!-- They must have been computed before, because they are already required
	443	!-- for other horizontal averages.
	444	tn = 0
[2232]	445	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	446	!$ tn = omp_get_thread_num()
[1]	447	!$OMP DO
	448	DO i = nxl, nxr
	449	DO j = nys, nyn
[2232]	450	DO k = nzb, nzt+1
	451	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	452	sums_l(k,1,tn) = sums_l(k,1,tn) + u(k,j,i) * rmask(j,i,sr) &
	453	* flag
	454	sums_l(k,2,tn) = sums_l(k,2,tn) + v(k,j,i) * rmask(j,i,sr) &
	455	* flag
	456	sums_l(k,4,tn) = sums_l(k,4,tn) + pt(k,j,i) * rmask(j,i,sr) &
	457	* flag
[1]	458	ENDDO
	459	ENDDO
	460	ENDDO
	461
	462	!
[96]	463	!-- Horizontally averaged profile of salinity
	464	IF ( ocean ) THEN
	465	!$OMP DO
	466	DO i = nxl, nxr
	467	DO j = nys, nyn
[2232]	468	DO k = nzb, nzt+1
	469	sums_l(k,23,tn) = sums_l(k,23,tn) + sa(k,j,i) &
	470	* rmask(j,i,sr) &
	471	* MERGE( 1.0_wp, 0.0_wp, &
	472	BTEST( wall_flags_0(k,j,i), 22 ) )
[96]	473	ENDDO
	474	ENDDO
	475	ENDDO
	476	ENDIF
	477
	478	!
[1]	479	!-- Horizontally averaged profiles of virtual potential temperature,
	480	!-- total water content, specific humidity and liquid water potential
	481	!-- temperature
[75]	482	IF ( humidity ) THEN
[1]	483	!$OMP DO
	484	DO i = nxl, nxr
	485	DO j = nys, nyn
[2232]	486	DO k = nzb, nzt+1
	487	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	488	sums_l(k,44,tn) = sums_l(k,44,tn) + &
	489	vpt(k,j,i) * rmask(j,i,sr) * flag
	490	sums_l(k,41,tn) = sums_l(k,41,tn) + &
	491	q(k,j,i) * rmask(j,i,sr) * flag
[1]	492	ENDDO
	493	ENDDO
	494	ENDDO
	495	IF ( cloud_physics ) THEN
	496	!$OMP DO
	497	DO i = nxl, nxr
	498	DO j = nys, nyn
[2232]	499	DO k = nzb, nzt+1
	500	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	501	sums_l(k,42,tn) = sums_l(k,42,tn) + &
	502	( q(k,j,i) - ql(k,j,i) ) * rmask(j,i,sr) &
	503	* flag
	504	sums_l(k,43,tn) = sums_l(k,43,tn) + ( &
[1]	505	pt(k,j,i) + l_d_cppt_d_t(k) ql(k,j,i) &
[2232]	506	) * rmask(j,i,sr) &
	507	* flag
[1]	508	ENDDO
	509	ENDDO
	510	ENDDO
	511	ENDIF
	512	ENDIF
	513
	514	!
	515	!-- Horizontally averaged profiles of passive scalar
	516	IF ( passive_scalar ) THEN
	517	!$OMP DO
	518	DO i = nxl, nxr
	519	DO j = nys, nyn
[2232]	520	DO k = nzb, nzt+1
[2270]	521	sums_l(k,115,tn) = sums_l(k,115,tn) + s(k,j,i) &
[2232]	522	* rmask(j,i,sr) &
	523	* MERGE( 1.0_wp, 0.0_wp, &
	524	BTEST( wall_flags_0(k,j,i), 22 ) )
[1]	525	ENDDO
	526	ENDDO
	527	ENDDO
	528	ENDIF
	529	!$OMP END PARALLEL
	530	!
	531	!-- Summation of thread sums
	532	IF ( threads_per_task > 1 ) THEN
	533	DO i = 1, threads_per_task-1
	534	sums_l(:,1,0) = sums_l(:,1,0) + sums_l(:,1,i)
	535	sums_l(:,2,0) = sums_l(:,2,0) + sums_l(:,2,i)
	536	sums_l(:,4,0) = sums_l(:,4,0) + sums_l(:,4,i)
[96]	537	IF ( ocean ) THEN
	538	sums_l(:,23,0) = sums_l(:,23,0) + sums_l(:,23,i)
	539	ENDIF
[75]	540	IF ( humidity ) THEN
[1]	541	sums_l(:,41,0) = sums_l(:,41,0) + sums_l(:,41,i)
	542	sums_l(:,44,0) = sums_l(:,44,0) + sums_l(:,44,i)
	543	IF ( cloud_physics ) THEN
	544	sums_l(:,42,0) = sums_l(:,42,0) + sums_l(:,42,i)
	545	sums_l(:,43,0) = sums_l(:,43,0) + sums_l(:,43,i)
	546	ENDIF
	547	ENDIF
	548	IF ( passive_scalar ) THEN
[2270]	549	sums_l(:,115,0) = sums_l(:,115,0) + sums_l(:,115,i)
[1]	550	ENDIF
	551	ENDDO
	552	ENDIF
	553
	554	#if defined( __parallel )
	555	!
	556	!-- Compute total sum from local sums
[622]	557	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	558	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), nzt+2-nzb, MPI_REAL, &
[1]	559	MPI_SUM, comm2d, ierr )
[622]	560	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	561	CALL MPI_ALLREDUCE( sums_l(nzb,2,0), sums(nzb,2), nzt+2-nzb, MPI_REAL, &
[1]	562	MPI_SUM, comm2d, ierr )
[622]	563	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	564	CALL MPI_ALLREDUCE( sums_l(nzb,4,0), sums(nzb,4), nzt+2-nzb, MPI_REAL, &
[1]	565	MPI_SUM, comm2d, ierr )
[96]	566	IF ( ocean ) THEN
[622]	567	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	568	CALL MPI_ALLREDUCE( sums_l(nzb,23,0), sums(nzb,23), nzt+2-nzb, &
[96]	569	MPI_REAL, MPI_SUM, comm2d, ierr )
	570	ENDIF
[75]	571	IF ( humidity ) THEN
[622]	572	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	573	CALL MPI_ALLREDUCE( sums_l(nzb,44,0), sums(nzb,44), nzt+2-nzb, &
[1]	574	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	575	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	576	CALL MPI_ALLREDUCE( sums_l(nzb,41,0), sums(nzb,41), nzt+2-nzb, &
[1]	577	MPI_REAL, MPI_SUM, comm2d, ierr )
	578	IF ( cloud_physics ) THEN
[622]	579	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	580	CALL MPI_ALLREDUCE( sums_l(nzb,42,0), sums(nzb,42), nzt+2-nzb, &
[1]	581	MPI_REAL, MPI_SUM, comm2d, ierr )
[622]	582	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1320]	583	CALL MPI_ALLREDUCE( sums_l(nzb,43,0), sums(nzb,43), nzt+2-nzb, &
[1]	584	MPI_REAL, MPI_SUM, comm2d, ierr )
	585	ENDIF
	586	ENDIF
	587
	588	IF ( passive_scalar ) THEN
[622]	589	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2270]	590	CALL MPI_ALLREDUCE( sums_l(nzb,115,0), sums(nzb,115), nzt+2-nzb, &
[1]	591	MPI_REAL, MPI_SUM, comm2d, ierr )
	592	ENDIF
	593	#else
	594	sums(:,1) = sums_l(:,1,0)
	595	sums(:,2) = sums_l(:,2,0)
	596	sums(:,4) = sums_l(:,4,0)
[96]	597	IF ( ocean ) sums(:,23) = sums_l(:,23,0)
[75]	598	IF ( humidity ) THEN
[1]	599	sums(:,44) = sums_l(:,44,0)
	600	sums(:,41) = sums_l(:,41,0)
	601	IF ( cloud_physics ) THEN
	602	sums(:,42) = sums_l(:,42,0)
	603	sums(:,43) = sums_l(:,43,0)
	604	ENDIF
	605	ENDIF
[2270]	606	IF ( passive_scalar ) sums(:,115) = sums_l(:,115,0)
[1]	607	#endif
	608
	609	!
	610	!-- Final values are obtained by division by the total number of grid points
	611	!-- used for summation. After that store profiles.
[132]	612	sums(:,1) = sums(:,1) / ngp_2dh(sr)
	613	sums(:,2) = sums(:,2) / ngp_2dh(sr)
	614	sums(:,4) = sums(:,4) / ngp_2dh_s_inner(:,sr)
[1]	615	hom(:,1,1,sr) = sums(:,1) ! u
	616	hom(:,1,2,sr) = sums(:,2) ! v
	617	hom(:,1,4,sr) = sums(:,4) ! pt
	618
[667]	619
[1]	620	!
[96]	621	!-- Salinity
	622	IF ( ocean ) THEN
[132]	623	sums(:,23) = sums(:,23) / ngp_2dh_s_inner(:,sr)
[96]	624	hom(:,1,23,sr) = sums(:,23) ! sa
	625	ENDIF
	626
	627	!
[1]	628	!-- Humidity and cloud parameters
[75]	629	IF ( humidity ) THEN
[132]	630	sums(:,44) = sums(:,44) / ngp_2dh_s_inner(:,sr)
	631	sums(:,41) = sums(:,41) / ngp_2dh_s_inner(:,sr)
[1]	632	hom(:,1,44,sr) = sums(:,44) ! vpt
	633	hom(:,1,41,sr) = sums(:,41) ! qv (q)
	634	IF ( cloud_physics ) THEN
[132]	635	sums(:,42) = sums(:,42) / ngp_2dh_s_inner(:,sr)
	636	sums(:,43) = sums(:,43) / ngp_2dh_s_inner(:,sr)
[1]	637	hom(:,1,42,sr) = sums(:,42) ! qv
	638	hom(:,1,43,sr) = sums(:,43) ! pt
	639	ENDIF
	640	ENDIF
	641
	642	!
	643	!-- Passive scalar
[2270]	644	IF ( passive_scalar ) hom(:,1,115,sr) = sums(:,115) / &
[1960]	645	ngp_2dh_s_inner(:,sr) ! s
[1]	646
	647	!
	648	!-- Horizontally averaged profiles of the remaining prognostic variables,
	649	!-- variances, the total and the perturbation energy (single values in last
	650	!-- column of sums_l) and some diagnostic quantities.
[132]	651	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	652	!-- ---- speaking the following k-loop would have to be split up and
	653	!-- rearranged according to the staggered grid.
[132]	654	!-- However, this implies no error since staggered velocity components
	655	!-- are zero at the walls and inside buildings.
[1]	656	tn = 0
[1815]	657	!$OMP PARALLEL PRIVATE( i, j, k, pts, sums_ll, sums_l_eper, &
	658	!$OMP sums_l_etot, tn, ust, ust2, u2, vst, vst2, v2, &
[2232]	659	!$OMP w2, flag, m, ki, l )
	660	!$ tn = omp_get_thread_num()
[1]	661	!$OMP DO
	662	DO i = nxl, nxr
	663	DO j = nys, nyn
[1353]	664	sums_l_etot = 0.0_wp
[2232]	665	DO k = nzb, nzt+1
	666	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
[1]	667	!
	668	!-- Prognostic and diagnostic variables
[2232]	669	sums_l(k,3,tn) = sums_l(k,3,tn) + w(k,j,i) * rmask(j,i,sr) &
	670	* flag
	671	sums_l(k,8,tn) = sums_l(k,8,tn) + e(k,j,i) * rmask(j,i,sr) &
	672	* flag
	673	sums_l(k,9,tn) = sums_l(k,9,tn) + km(k,j,i) * rmask(j,i,sr) &
	674	* flag
	675	sums_l(k,10,tn) = sums_l(k,10,tn) + kh(k,j,i) * rmask(j,i,sr) &
	676	* flag
[2252]	677	sums_l(k,40,tn) = sums_l(k,40,tn) + ( p(k,j,i) &
	678	/ momentumflux_output_conversion(k) ) &
	679	* flag
[1]	680
	681	sums_l(k,33,tn) = sums_l(k,33,tn) + &
[2232]	682	( pt(k,j,i)-hom(k,1,4,sr) )*2 rmask(j,i,sr)&
	683	* flag
[624]	684
	685	IF ( humidity ) THEN
	686	sums_l(k,70,tn) = sums_l(k,70,tn) + &
[2232]	687	( q(k,j,i)-hom(k,1,41,sr) )*2 rmask(j,i,sr)&
	688	* flag
[624]	689	ENDIF
[1960]	690	IF ( passive_scalar ) THEN
[2270]	691	sums_l(k,116,tn) = sums_l(k,116,tn) + &
	692	( s(k,j,i)-hom(k,1,115,sr) )*2 rmask(j,i,sr)&
[2232]	693	* flag
[1960]	694	ENDIF
[699]	695	!
	696	!-- Higher moments
	697	!-- (Computation of the skewness of w further below)
[2232]	698	sums_l(k,38,tn) = sums_l(k,38,tn) + w(k,j,i)*3 rmask(j,i,sr) &
	699	* flag
[667]	700
[1]	701	sums_l_etot = sums_l_etot + &
[2232]	702	0.5_wp * ( u(k,j,i)2 + v(k,j,i)2 + &
	703	w(k,j,i)*2 ) rmask(j,i,sr)&
	704	* flag
[1]	705	ENDDO
	706	!
	707	!-- Total and perturbation energy for the total domain (being
	708	!-- collected in the last column of sums_l). Summation of these
	709	!-- quantities is seperated from the previous loop in order to
	710	!-- allow vectorization of that loop.
[87]	711	sums_l(nzb+4,pr_palm,tn) = sums_l(nzb+4,pr_palm,tn) + sums_l_etot
[1]	712	!
	713	!-- 2D-arrays (being collected in the last column of sums_l)
[2773]	714	IF ( surf_def_h(0)%end_index(j,i) >= &
[2696]	715	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	716	m = surf_def_h(0)%start_index(j,i)
[2773]	717	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	718	surf_def_h(0)%us(m) * rmask(j,i,sr)
[2773]	719	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	720	surf_def_h(0)%usws(m) * rmask(j,i,sr)
[2773]	721	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	722	surf_def_h(0)%vsws(m) * rmask(j,i,sr)
[2773]	723	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	724	surf_def_h(0)%ts(m) * rmask(j,i,sr)
	725	IF ( humidity ) THEN
[2773]	726	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	727	surf_def_h(0)%qs(m) * rmask(j,i,sr)
	728	ENDIF
	729	IF ( passive_scalar ) THEN
[2773]	730	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	731	surf_def_h(0)%ss(m) * rmask(j,i,sr)
	732	ENDIF
[2773]	733	!
	734	!-- Summation of surface temperature.
	735	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	736	surf_def_h(0)%pt_surface(m) * &
	737	rmask(j,i,sr)
[197]	738	ENDIF
[2696]	739	IF ( surf_lsm_h%end_index(j,i) >= surf_lsm_h%start_index(j,i) ) THEN
[2232]	740	m = surf_lsm_h%start_index(j,i)
[2773]	741	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	742	surf_lsm_h%us(m) * rmask(j,i,sr)
[2773]	743	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	744	surf_lsm_h%usws(m) * rmask(j,i,sr)
[2773]	745	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	746	surf_lsm_h%vsws(m) * rmask(j,i,sr)
[2773]	747	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	748	surf_lsm_h%ts(m) * rmask(j,i,sr)
	749	IF ( humidity ) THEN
[2773]	750	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	751	surf_lsm_h%qs(m) * rmask(j,i,sr)
	752	ENDIF
	753	IF ( passive_scalar ) THEN
[2773]	754	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	755	surf_lsm_h%ss(m) * rmask(j,i,sr)
	756	ENDIF
[2773]	757	!
	758	!-- Summation of surface temperature.
	759	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	760	surf_lsm_h%pt_surface(m) * &
	761	rmask(j,i,sr)
[1960]	762	ENDIF
[2696]	763	IF ( surf_usm_h%end_index(j,i) >= surf_usm_h%start_index(j,i) ) THEN
	764	m = surf_usm_h%start_index(j,i)
[2773]	765	sums_l(nzb,pr_palm,tn) = sums_l(nzb,pr_palm,tn) + &
[2232]	766	surf_usm_h%us(m) * rmask(j,i,sr)
[2773]	767	sums_l(nzb+1,pr_palm,tn) = sums_l(nzb+1,pr_palm,tn) + &
[2232]	768	surf_usm_h%usws(m) * rmask(j,i,sr)
[2773]	769	sums_l(nzb+2,pr_palm,tn) = sums_l(nzb+2,pr_palm,tn) + &
[2232]	770	surf_usm_h%vsws(m) * rmask(j,i,sr)
[2773]	771	sums_l(nzb+3,pr_palm,tn) = sums_l(nzb+3,pr_palm,tn) + &
[2232]	772	surf_usm_h%ts(m) * rmask(j,i,sr)
	773	IF ( humidity ) THEN
[2773]	774	sums_l(nzb+12,pr_palm,tn) = sums_l(nzb+12,pr_palm,tn) + &
[2232]	775	surf_usm_h%qs(m) * rmask(j,i,sr)
	776	ENDIF
	777	IF ( passive_scalar ) THEN
[2773]	778	sums_l(nzb+13,pr_palm,tn) = sums_l(nzb+13,pr_palm,tn) + &
[2232]	779	surf_usm_h%ss(m) * rmask(j,i,sr)
	780	ENDIF
[2773]	781	!
	782	!-- Summation of surface temperature.
	783	sums_l(nzb+14,pr_palm,tn) = sums_l(nzb+14,pr_palm,tn) + &
	784	surf_usm_h%pt_surface(m) * &
	785	rmask(j,i,sr)
[2232]	786	ENDIF
[1]	787	ENDDO
	788	ENDDO
	789
	790	!
[667]	791	!-- Computation of statistics when ws-scheme is not used. Else these
	792	!-- quantities are evaluated in the advection routines.
[1918]	793	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 .OR. simulated_time == 0.0_wp ) &
	794	THEN
[667]	795	!$OMP DO
	796	DO i = nxl, nxr
	797	DO j = nys, nyn
[2232]	798	DO k = nzb, nzt+1
	799	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	800
[667]	801	u2 = u(k,j,i)**2
	802	v2 = v(k,j,i)**2
	803	w2 = w(k,j,i)**2
	804	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	805	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	806
[2232]	807	sums_l(k,30,tn) = sums_l(k,30,tn) + ust2 * rmask(j,i,sr) &
	808	* flag
	809	sums_l(k,31,tn) = sums_l(k,31,tn) + vst2 * rmask(j,i,sr) &
	810	* flag
	811	sums_l(k,32,tn) = sums_l(k,32,tn) + w2 * rmask(j,i,sr) &
	812	* flag
[667]	813	!
[2026]	814	!-- Perturbation energy
[667]	815
[1353]	816	sums_l(k,34,tn) = sums_l(k,34,tn) + 0.5_wp * &
[2232]	817	( ust2 + vst2 + w2 ) * rmask(j,i,sr) &
	818	* flag
[667]	819	ENDDO
	820	ENDDO
	821	ENDDO
	822	ENDIF
[2026]	823	!
	824	!-- Computaion of domain-averaged perturbation energy. Please note,
	825	!-- to prevent that perturbation energy is larger (even if only slightly)
	826	!-- than the total kinetic energy, calculation is based on deviations from
	827	!-- the horizontal mean, instead of spatial descretization of the advection
	828	!-- term.
	829	!$OMP DO
	830	DO i = nxl, nxr
	831	DO j = nys, nyn
[2232]	832	DO k = nzb, nzt+1
	833	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
	834
[2026]	835	w2 = w(k,j,i)**2
	836	ust2 = ( u(k,j,i) - hom(k,1,1,sr) )**2
	837	vst2 = ( v(k,j,i) - hom(k,1,2,sr) )**2
	838	w2 = w(k,j,i)**2
[1241]	839
[2026]	840	sums_l(nzb+5,pr_palm,tn) = sums_l(nzb+5,pr_palm,tn) &
[2232]	841	+ 0.5_wp * ( ust2 + vst2 + w2 ) &
	842	* rmask(j,i,sr) &
	843	* flag
[2026]	844	ENDDO
	845	ENDDO
	846	ENDDO
	847
[667]	848	!
[1]	849	!-- Horizontally averaged profiles of the vertical fluxes
[667]	850
[1]	851	!$OMP DO
	852	DO i = nxl, nxr
	853	DO j = nys, nyn
	854	!
	855	!-- Subgridscale fluxes (without Prandtl layer from k=nzb,
	856	!-- oterwise from k=nzb+1)
[132]	857	!-- NOTE: for simplicity, nzb_diff_s_inner is used below, although
[1]	858	!-- ---- strictly speaking the following k-loop would have to be
	859	!-- split up according to the staggered grid.
[132]	860	!-- However, this implies no error since staggered velocity
	861	!-- components are zero at the walls and inside buildings.
[2232]	862	!-- Flag 23 is used to mask surface fluxes as well as model-top fluxes,
	863	!-- which are added further below.
	864	DO k = nzb, nzt
	865	flag = MERGE( 1.0_wp, 0.0_wp, &
	866	BTEST( wall_flags_0(k,j,i), 23 ) ) * &
	867	MERGE( 1.0_wp, 0.0_wp, &
	868	BTEST( wall_flags_0(k,j,i), 9 ) )
[1]	869	!
	870	!-- Momentum flux w"u"
[1353]	871	sums_l(k,12,tn) = sums_l(k,12,tn) - 0.25_wp * ( &
[1]	872	km(k,j,i)+km(k+1,j,i)+km(k,j,i-1)+km(k+1,j,i-1) &
	873	) * ( &
	874	( u(k+1,j,i) - u(k,j,i) ) * ddzu(k+1) &
	875	+ ( w(k,j,i) - w(k,j,i-1) ) * ddx &
[2037]	876	) * rmask(j,i,sr) &
	877	* rho_air_zw(k) &
[2232]	878	* momentumflux_output_conversion(k) &
	879	* flag
[1]	880	!
	881	!-- Momentum flux w"v"
[1353]	882	sums_l(k,14,tn) = sums_l(k,14,tn) - 0.25_wp * ( &
[1]	883	km(k,j,i)+km(k+1,j,i)+km(k,j-1,i)+km(k+1,j-1,i) &
	884	) * ( &
	885	( v(k+1,j,i) - v(k,j,i) ) * ddzu(k+1) &
	886	+ ( w(k,j,i) - w(k,j-1,i) ) * ddy &
[2037]	887	) * rmask(j,i,sr) &
	888	* rho_air_zw(k) &
[2232]	889	* momentumflux_output_conversion(k) &
	890	* flag
[1]	891	!
	892	!-- Heat flux w"pt"
	893	sums_l(k,16,tn) = sums_l(k,16,tn) &
[1353]	894	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	895	* ( pt(k+1,j,i) - pt(k,j,i) ) &
[2037]	896	* rho_air_zw(k) &
	897	* heatflux_output_conversion(k) &
[2232]	898	* ddzu(k+1) * rmask(j,i,sr) &
	899	* flag
[1]	900
	901
	902	!
[96]	903	!-- Salinity flux w"sa"
	904	IF ( ocean ) THEN
	905	sums_l(k,65,tn) = sums_l(k,65,tn) &
[1353]	906	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[96]	907	* ( sa(k+1,j,i) - sa(k,j,i) ) &
[2232]	908	* ddzu(k+1) * rmask(j,i,sr) &
	909	* flag
[96]	910	ENDIF
	911
	912	!
[1]	913	!-- Buoyancy flux, water flux (humidity flux) w"q"
[75]	914	IF ( humidity ) THEN
[1]	915	sums_l(k,45,tn) = sums_l(k,45,tn) &
[1353]	916	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	917	* ( vpt(k+1,j,i) - vpt(k,j,i) ) &
[2037]	918	* rho_air_zw(k) &
	919	* heatflux_output_conversion(k) &
[2232]	920	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	921	sums_l(k,48,tn) = sums_l(k,48,tn) &
[1353]	922	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	923	* ( q(k+1,j,i) - q(k,j,i) ) &
[2037]	924	* rho_air_zw(k) &
	925	* waterflux_output_conversion(k)&
[2232]	926	* ddzu(k+1) * rmask(j,i,sr) * flag
[1007]	927
[1]	928	IF ( cloud_physics ) THEN
	929	sums_l(k,51,tn) = sums_l(k,51,tn) &
[1353]	930	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[1]	931	* ( ( q(k+1,j,i) - ql(k+1,j,i) )&
	932	- ( q(k,j,i) - ql(k,j,i) ) ) &
[2037]	933	* rho_air_zw(k) &
	934	* waterflux_output_conversion(k)&
[2232]	935	* ddzu(k+1) * rmask(j,i,sr) * flag
[1]	936	ENDIF
	937	ENDIF
	938
	939	!
	940	!-- Passive scalar flux
	941	IF ( passive_scalar ) THEN
[2270]	942	sums_l(k,117,tn) = sums_l(k,117,tn) &
[1353]	943	- 0.5_wp * ( kh(k,j,i) + kh(k+1,j,i) )&
[2026]	944	* ( s(k+1,j,i) - s(k,j,i) ) &
[2232]	945	* ddzu(k+1) * rmask(j,i,sr) &
	946	* flag
[1]	947	ENDIF
	948
	949	ENDDO
	950
	951	!
	952	!-- Subgridscale fluxes in the Prandtl layer
	953	IF ( use_surface_fluxes ) THEN
[2232]	954	DO l = 0, 1
	955	ki = MERGE( -1, 0, l == 0 )
	956	IF ( surf_def_h(l)%ns >= 1 ) THEN
[2696]	957	DO m = surf_def_h(l)%start_index(j,i), &
	958	surf_def_h(l)%end_index(j,i)
[2232]	959	k = surf_def_h(l)%k(m)
	960
	961	sums_l(k+ki,12,tn) = sums_l(k+ki,12,tn) + &
	962	momentumflux_output_conversion(k+ki) * &
	963	surf_def_h(l)%usws(m) * rmask(j,i,sr) ! w"u"
	964	sums_l(k+ki,14,tn) = sums_l(k+ki,14,tn) + &
	965	momentumflux_output_conversion(k+ki) * &
	966	surf_def_h(l)%vsws(m) * rmask(j,i,sr) ! w"v"
	967	sums_l(k+ki,16,tn) = sums_l(k+ki,16,tn) + &
	968	heatflux_output_conversion(k+ki) * &
	969	surf_def_h(l)%shf(m) * rmask(j,i,sr) ! w"pt"
	970	sums_l(k+ki,58,tn) = sums_l(k+ki,58,tn) + &
	971	0.0_wp * rmask(j,i,sr) ! u"pt"
	972	sums_l(k+ki,61,tn) = sums_l(k+ki,61,tn) + &
	973	0.0_wp * rmask(j,i,sr) ! v"pt"
	974	IF ( ocean ) THEN
	975	sums_l(k+ki,65,tn) = sums_l(k+ki,65,tn) + &
	976	surf_def_h(l)%sasws(m) * rmask(j,i,sr) ! w"sa"
	977	ENDIF
	978	IF ( humidity ) THEN
	979	sums_l(k+ki,48,tn) = sums_l(k+ki,48,tn) + &
	980	waterflux_output_conversion(k+ki) * &
	981	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	982	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	983	( 1.0_wp + 0.61_wp * q(k+ki,j,i) ) * &
	984	surf_def_h(l)%shf(m) + 0.61_wp * pt(k+ki,j,i) * &
	985	surf_def_h(l)%qsws(m) ) &
	986	* heatflux_output_conversion(k+ki)
	987	IF ( cloud_droplets ) THEN
	988	sums_l(k+ki,45,tn) = sums_l(k+ki,45,tn) + ( &
	989	( 1.0_wp + 0.61_wp * q(k+ki,j,i) - &
	990	ql(k+ki,j,i) ) * surf_def_h(l)%shf(m) + &
	991	0.61_wp * pt(k+ki,j,i) * surf_def_h(l)%qsws(m) ) &
	992	* heatflux_output_conversion(k+ki)
	993	ENDIF
	994	IF ( cloud_physics ) THEN
	995	!
	996	!-- Formula does not work if ql(k+ki) /= 0.0
	997	sums_l(k+ki,51,tn) = sums_l(k+ki,51,tn) + &
	998	waterflux_output_conversion(k+ki) * &
	999	surf_def_h(l)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1000	ENDIF
	1001	ENDIF
	1002	IF ( passive_scalar ) THEN
[2270]	1003	sums_l(k+ki,117,tn) = sums_l(k+ki,117,tn) + &
[2232]	1004	surf_def_h(l)%ssws(m) * rmask(j,i,sr) ! w"s"
	1005	ENDIF
	1006
	1007	ENDDO
	1008
	1009	ENDIF
	1010	ENDDO
[2696]	1011	IF ( surf_lsm_h%end_index(j,i) >= &
	1012	surf_lsm_h%start_index(j,i) ) THEN
[2232]	1013	m = surf_lsm_h%start_index(j,i)
	1014	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
[2037]	1015	momentumflux_output_conversion(nzb) * &
[2232]	1016	surf_lsm_h%usws(m) * rmask(j,i,sr) ! w"u"
	1017	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
[2037]	1018	momentumflux_output_conversion(nzb) * &
[2232]	1019	surf_lsm_h%vsws(m) * rmask(j,i,sr) ! w"v"
	1020	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
[2037]	1021	heatflux_output_conversion(nzb) * &
[2232]	1022	surf_lsm_h%shf(m) * rmask(j,i,sr) ! w"pt"
	1023	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
[1353]	1024	0.0_wp * rmask(j,i,sr) ! u"pt"
[2232]	1025	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
[1353]	1026	0.0_wp * rmask(j,i,sr) ! v"pt"
[2232]	1027	IF ( ocean ) THEN
	1028	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	1029	surf_lsm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	1030	ENDIF
	1031	IF ( humidity ) THEN
	1032	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
	1033	waterflux_output_conversion(nzb) * &
	1034	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1035	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	1036	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
	1037	surf_lsm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	1038	surf_lsm_h%qsws(m) ) &
	1039	* heatflux_output_conversion(nzb)
	1040	IF ( cloud_droplets ) THEN
	1041	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
	1042	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
	1043	ql(nzb,j,i) ) * surf_lsm_h%shf(m) + &
	1044	0.61_wp * pt(nzb,j,i) * surf_lsm_h%qsws(m) ) &
	1045	* heatflux_output_conversion(nzb)
	1046	ENDIF
	1047	IF ( cloud_physics ) THEN
	1048	!
	1049	!-- Formula does not work if ql(nzb) /= 0.0
	1050	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
	1051	waterflux_output_conversion(nzb) * &
	1052	surf_lsm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1053	ENDIF
	1054	ENDIF
	1055	IF ( passive_scalar ) THEN
[2270]	1056	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	1057	surf_lsm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	1058	ENDIF
	1059
	1060
[96]	1061	ENDIF
[2696]	1062	IF ( surf_usm_h%end_index(j,i) >= &
	1063	surf_usm_h%start_index(j,i) ) THEN
[2232]	1064	m = surf_usm_h%start_index(j,i)
	1065	sums_l(nzb,12,tn) = sums_l(nzb,12,tn) + &
	1066	momentumflux_output_conversion(nzb) * &
	1067	surf_usm_h%usws(m) * rmask(j,i,sr) ! w"u"
	1068	sums_l(nzb,14,tn) = sums_l(nzb,14,tn) + &
	1069	momentumflux_output_conversion(nzb) * &
	1070	surf_usm_h%vsws(m) * rmask(j,i,sr) ! w"v"
	1071	sums_l(nzb,16,tn) = sums_l(nzb,16,tn) + &
	1072	heatflux_output_conversion(nzb) * &
	1073	surf_usm_h%shf(m) * rmask(j,i,sr) ! w"pt"
	1074	sums_l(nzb,58,tn) = sums_l(nzb,58,tn) + &
	1075	0.0_wp * rmask(j,i,sr) ! u"pt"
	1076	sums_l(nzb,61,tn) = sums_l(nzb,61,tn) + &
	1077	0.0_wp * rmask(j,i,sr) ! v"pt"
	1078	IF ( ocean ) THEN
	1079	sums_l(nzb,65,tn) = sums_l(nzb,65,tn) + &
	1080	surf_usm_h%sasws(m) * rmask(j,i,sr) ! w"sa"
	1081	ENDIF
	1082	IF ( humidity ) THEN
	1083	sums_l(nzb,48,tn) = sums_l(nzb,48,tn) + &
[2037]	1084	waterflux_output_conversion(nzb) * &
[2232]	1085	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1086	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	1087	( 1.0_wp + 0.61_wp * q(nzb,j,i) ) * &
[2232]	1088	surf_usm_h%shf(m) + 0.61_wp * pt(nzb,j,i) * &
	1089	surf_usm_h%qsws(m) ) &
[2037]	1090	* heatflux_output_conversion(nzb)
[2232]	1091	IF ( cloud_droplets ) THEN
	1092	sums_l(nzb,45,tn) = sums_l(nzb,45,tn) + ( &
[1353]	1093	( 1.0_wp + 0.61_wp * q(nzb,j,i) - &
[2232]	1094	ql(nzb,j,i) ) * surf_usm_h%shf(m) + &
	1095	0.61_wp * pt(nzb,j,i) * surf_usm_h%qsws(m) ) &
[2037]	1096	* heatflux_output_conversion(nzb)
[2232]	1097	ENDIF
	1098	IF ( cloud_physics ) THEN
[1]	1099	!
[2232]	1100	!-- Formula does not work if ql(nzb) /= 0.0
	1101	sums_l(nzb,51,tn) = sums_l(nzb,51,tn) + &
[2037]	1102	waterflux_output_conversion(nzb) * &
[2232]	1103	surf_usm_h%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
	1104	ENDIF
[1]	1105	ENDIF
[2232]	1106	IF ( passive_scalar ) THEN
[2270]	1107	sums_l(nzb,117,tn) = sums_l(nzb,117,tn) + &
[2232]	1108	surf_usm_h%ssws(m) * rmask(j,i,sr) ! w"s"
	1109	ENDIF
	1110
	1111
[1]	1112	ENDIF
[2232]	1113
[1]	1114	ENDIF
	1115
[1691]	1116	IF ( .NOT. neutral ) THEN
[2696]	1117	IF ( surf_def_h(0)%end_index(j,i) >= &
	1118	surf_def_h(0)%start_index(j,i) ) THEN
[2232]	1119	m = surf_def_h(0)%start_index(j,i)
[2696]	1120	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1121	surf_def_h(0)%ol(m) * rmask(j,i,sr) ! L
	1122	ENDIF
[2696]	1123	IF ( surf_lsm_h%end_index(j,i) >= &
	1124	surf_lsm_h%start_index(j,i) ) THEN
[2232]	1125	m = surf_lsm_h%start_index(j,i)
[2696]	1126	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1127	surf_lsm_h%ol(m) * rmask(j,i,sr) ! L
	1128	ENDIF
[2696]	1129	IF ( surf_usm_h%end_index(j,i) >= &
	1130	surf_usm_h%start_index(j,i) ) THEN
[2232]	1131	m = surf_usm_h%start_index(j,i)
[2696]	1132	sums_l(nzb,112,tn) = sums_l(nzb,112,tn) + &
[2232]	1133	surf_usm_h%ol(m) * rmask(j,i,sr) ! L
	1134	ENDIF
[1691]	1135	ENDIF
	1136
[2296]	1137	IF ( radiation ) THEN
[2696]	1138	IF ( surf_def_h(0)%end_index(j,i) >= &
	1139	surf_def_h(0)%start_index(j,i) ) THEN
	1140	m = surf_def_h(0)%start_index(j,i)
	1141	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1142	surf_def_h(0)%rad_net(m) * rmask(j,i,sr)
	1143	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1144	surf_def_h(0)%rad_lw_in(m) * rmask(j,i,sr)
	1145	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1146	surf_def_h(0)%rad_lw_out(m) * rmask(j,i,sr)
	1147	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1148	surf_def_h(0)%rad_sw_in(m) * rmask(j,i,sr)
	1149	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1150	surf_def_h(0)%rad_sw_out(m) * rmask(j,i,sr)
	1151	ENDIF
	1152	IF ( surf_lsm_h%end_index(j,i) >= &
	1153	surf_lsm_h%start_index(j,i) ) THEN
	1154	m = surf_lsm_h%start_index(j,i)
	1155	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1156	surf_lsm_h%rad_net(m) * rmask(j,i,sr)
	1157	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1158	surf_lsm_h%rad_lw_in(m) * rmask(j,i,sr)
	1159	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1160	surf_lsm_h%rad_lw_out(m) * rmask(j,i,sr)
	1161	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1162	surf_lsm_h%rad_sw_in(m) * rmask(j,i,sr)
	1163	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1164	surf_lsm_h%rad_sw_out(m) * rmask(j,i,sr)
	1165	ENDIF
	1166	IF ( surf_usm_h%end_index(j,i) >= &
	1167	surf_usm_h%start_index(j,i) ) THEN
	1168	m = surf_usm_h%start_index(j,i)
	1169	sums_l(nzb,99,tn) = sums_l(nzb,99,tn) + &
	1170	surf_usm_h%rad_net(m) * rmask(j,i,sr)
	1171	sums_l(nzb,100,tn) = sums_l(nzb,100,tn) + &
	1172	surf_usm_h%rad_lw_in(m) * rmask(j,i,sr)
	1173	sums_l(nzb,101,tn) = sums_l(nzb,101,tn) + &
	1174	surf_usm_h%rad_lw_out(m) * rmask(j,i,sr)
	1175	sums_l(nzb,102,tn) = sums_l(nzb,102,tn) + &
	1176	surf_usm_h%rad_sw_in(m) * rmask(j,i,sr)
	1177	sums_l(nzb,103,tn) = sums_l(nzb,103,tn) + &
	1178	surf_usm_h%rad_sw_out(m) * rmask(j,i,sr)
	1179	ENDIF
[1585]	1180
	1181	#if defined ( __rrtmg )
	1182	IF ( radiation_scheme == 'rrtmg' ) THEN
[2696]	1183
	1184	IF ( surf_def_h(0)%end_index(j,i) >= &
	1185	surf_def_h(0)%start_index(j,i) ) THEN
	1186	m = surf_def_h(0)%start_index(j,i)
	1187	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1188	surf_def_h(0)%rrtm_aldif(0,m) * rmask(j,i,sr)
[2696]	1189	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1190	surf_def_h(0)%rrtm_aldir(0,m) * rmask(j,i,sr)
[2696]	1191	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1192	surf_def_h(0)%rrtm_asdif(0,m) * rmask(j,i,sr)
[2696]	1193	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1194	surf_def_h(0)%rrtm_asdir(0,m) * rmask(j,i,sr)
[2696]	1195	ENDIF
	1196	IF ( surf_lsm_h%end_index(j,i) >= &
	1197	surf_lsm_h%start_index(j,i) ) THEN
	1198	m = surf_lsm_h%start_index(j,i)
	1199	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1200	SUM( surf_lsm_h%frac(:,m) * &
	1201	surf_lsm_h%rrtm_aldif(:,m) ) * rmask(j,i,sr)
[2696]	1202	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1203	SUM( surf_lsm_h%frac(:,m) * &
	1204	surf_lsm_h%rrtm_aldir(:,m) ) * rmask(j,i,sr)
[2696]	1205	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1206	SUM( surf_lsm_h%frac(:,m) * &
	1207	surf_lsm_h%rrtm_asdif(:,m) ) * rmask(j,i,sr)
[2696]	1208	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1209	SUM( surf_lsm_h%frac(:,m) * &
	1210	surf_lsm_h%rrtm_asdir(:,m) ) * rmask(j,i,sr)
[2696]	1211	ENDIF
	1212	IF ( surf_usm_h%end_index(j,i) >= &
	1213	surf_usm_h%start_index(j,i) ) THEN
	1214	m = surf_usm_h%start_index(j,i)
	1215	sums_l(nzb,108,tn) = sums_l(nzb,108,tn) + &
[2753]	1216	SUM( surf_usm_h%frac(:,m) * &
	1217	surf_usm_h%rrtm_aldif(:,m) ) * rmask(j,i,sr)
[2696]	1218	sums_l(nzb,109,tn) = sums_l(nzb,109,tn) + &
[2753]	1219	SUM( surf_usm_h%frac(:,m) * &
	1220	surf_usm_h%rrtm_aldir(:,m) ) * rmask(j,i,sr)
[2696]	1221	sums_l(nzb,110,tn) = sums_l(nzb,110,tn) + &
[2753]	1222	SUM( surf_usm_h%frac(:,m) * &
	1223	surf_usm_h%rrtm_asdif(:,m) ) * rmask(j,i,sr)
[2696]	1224	sums_l(nzb,111,tn) = sums_l(nzb,111,tn) + &
[2753]	1225	SUM( surf_usm_h%frac(:,m) * &
	1226	surf_usm_h%rrtm_asdir(:,m) ) * rmask(j,i,sr)
[2696]	1227	ENDIF
	1228
[1585]	1229	ENDIF
	1230	#endif
[1551]	1231	ENDIF
[1]	1232	!
[19]	1233	!-- Subgridscale fluxes at the top surface
	1234	IF ( use_top_fluxes ) THEN
[2232]	1235	m = surf_def_h(2)%start_index(j,i)
[550]	1236	sums_l(nzt:nzt+1,12,tn) = sums_l(nzt:nzt+1,12,tn) + &
[2037]	1237	momentumflux_output_conversion(nzt:nzt+1) * &
[2232]	1238	surf_def_h(2)%usws(m) * rmask(j,i,sr) ! w"u"
[550]	1239	sums_l(nzt:nzt+1,14,tn) = sums_l(nzt:nzt+1,14,tn) + &
[2037]	1240	momentumflux_output_conversion(nzt:nzt+1) * &
[2232]	1241	surf_def_h(2)%vsws(m) * rmask(j,i,sr) ! w"v"
[550]	1242	sums_l(nzt:nzt+1,16,tn) = sums_l(nzt:nzt+1,16,tn) + &
[2037]	1243	heatflux_output_conversion(nzt:nzt+1) * &
[2232]	1244	surf_def_h(2)%shf(m) * rmask(j,i,sr) ! w"pt"
[550]	1245	sums_l(nzt:nzt+1,58,tn) = sums_l(nzt:nzt+1,58,tn) + &
[1353]	1246	0.0_wp * rmask(j,i,sr) ! u"pt"
[550]	1247	sums_l(nzt:nzt+1,61,tn) = sums_l(nzt:nzt+1,61,tn) + &
[1353]	1248	0.0_wp * rmask(j,i,sr) ! v"pt"
[550]	1249
[96]	1250	IF ( ocean ) THEN
	1251	sums_l(nzt,65,tn) = sums_l(nzt,65,tn) + &
[2232]	1252	surf_def_h(2)%sasws(m) * rmask(j,i,sr) ! w"sa"
[96]	1253	ENDIF
[75]	1254	IF ( humidity ) THEN
[1353]	1255	sums_l(nzt,48,tn) = sums_l(nzt,48,tn) + &
[2037]	1256	waterflux_output_conversion(nzt) * &
[2232]	1257	surf_def_h(2)%qsws(m) * rmask(j,i,sr) ! w"q" (w"qv")
[1353]	1258	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1259	( 1.0_wp + 0.61_wp * q(nzt,j,i) ) * &
[2232]	1260	surf_def_h(2)%shf(m) + &
	1261	0.61_wp * pt(nzt,j,i) * &
	1262	surf_def_h(2)%qsws(m) ) &
[2037]	1263	* heatflux_output_conversion(nzt)
[1007]	1264	IF ( cloud_droplets ) THEN
[1353]	1265	sums_l(nzt,45,tn) = sums_l(nzt,45,tn) + ( &
	1266	( 1.0_wp + 0.61_wp * q(nzt,j,i) - &
[2232]	1267	ql(nzt,j,i) ) * &
	1268	surf_def_h(2)%shf(m) + &
	1269	0.61_wp * pt(nzt,j,i) * &
	1270	surf_def_h(2)%qsws(m) )&
[2037]	1271	* heatflux_output_conversion(nzt)
[1007]	1272	ENDIF
[19]	1273	IF ( cloud_physics ) THEN
	1274	!
	1275	!-- Formula does not work if ql(nzb) /= 0.0
	1276	sums_l(nzt,51,tn) = sums_l(nzt,51,tn) + & ! w"q" (w"qv")
[2037]	1277	waterflux_output_conversion(nzt) * &
[2232]	1278	surf_def_h(2)%qsws(m) * rmask(j,i,sr)
[19]	1279	ENDIF
	1280	ENDIF
	1281	IF ( passive_scalar ) THEN
[2270]	1282	sums_l(nzt,117,tn) = sums_l(nzt,117,tn) + &
[2232]	1283	surf_def_h(2)%ssws(m) * rmask(j,i,sr) ! w"s"
[19]	1284	ENDIF
	1285	ENDIF
	1286
	1287	!
[1]	1288	!-- Resolved fluxes (can be computed for all horizontal points)
[132]	1289	!-- NOTE: for simplicity, nzb_s_inner is used below, although strictly
[1]	1290	!-- ---- speaking the following k-loop would have to be split up and
	1291	!-- rearranged according to the staggered grid.
[2232]	1292	DO k = nzb, nzt
	1293	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 22 ) )
[1353]	1294	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1295	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1296	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1297	v(k+1,j,i) - hom(k+1,1,2,sr) )
	1298	pts = 0.5_wp * ( pt(k,j,i) - hom(k,1,4,sr) + &
	1299	pt(k+1,j,i) - hom(k+1,1,4,sr) )
[667]	1300
[1]	1301	!-- Higher moments
[1353]	1302	sums_l(k,35,tn) = sums_l(k,35,tn) + pts * w(k,j,i)*2 &
[2232]	1303	rmask(j,i,sr) * flag
[1353]	1304	sums_l(k,36,tn) = sums_l(k,36,tn) + pts*2 w(k,j,i) * &
[2232]	1305	rmask(j,i,sr) * flag
[1]	1306
	1307	!
[96]	1308	!-- Salinity flux and density (density does not belong to here,
[97]	1309	!-- but so far there is no other suitable place to calculate)
[96]	1310	IF ( ocean ) THEN
[1567]	1311	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1312	pts = 0.5_wp * ( sa(k,j,i) - hom(k,1,23,sr) + &
	1313	sa(k+1,j,i) - hom(k+1,1,23,sr) )
	1314	sums_l(k,66,tn) = sums_l(k,66,tn) + pts * w(k,j,i) * &
[2232]	1315	rmask(j,i,sr) * flag
[667]	1316	ENDIF
[2232]	1317	sums_l(k,64,tn) = sums_l(k,64,tn) + rho_ocean(k,j,i) * &
	1318	rmask(j,i,sr) * flag
[1353]	1319	sums_l(k,71,tn) = sums_l(k,71,tn) + prho(k,j,i) * &
[2232]	1320	rmask(j,i,sr) * flag
[96]	1321	ENDIF
	1322
	1323	!
[1053]	1324	!-- Buoyancy flux, water flux, humidity flux, liquid water
	1325	!-- content, rain drop concentration and rain water content
[75]	1326	IF ( humidity ) THEN
[1007]	1327	IF ( cloud_physics .OR. cloud_droplets ) THEN
[1353]	1328	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
[1007]	1329	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
[1353]	1330	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[2037]	1331	heatflux_output_conversion(k) * &
[2232]	1332	rmask(j,i,sr) * flag
	1333	sums_l(k,54,tn) = sums_l(k,54,tn) + ql(k,j,i) * rmask(j,i,sr) &
	1334	* flag
[1822]	1335
[1053]	1336	IF ( .NOT. cloud_droplets ) THEN
[1353]	1337	pts = 0.5_wp * &
[1115]	1338	( ( q(k,j,i) - ql(k,j,i) ) - &
	1339	hom(k,1,42,sr) + &
	1340	( q(k+1,j,i) - ql(k+1,j,i) ) - &
[1053]	1341	hom(k+1,1,42,sr) )
[1115]	1342	sums_l(k,52,tn) = sums_l(k,52,tn) + pts * w(k,j,i) * &
[2037]	1343	waterflux_output_conversion(k) * &
[2232]	1344	rmask(j,i,sr) * &
	1345	flag
[1822]	1346	sums_l(k,75,tn) = sums_l(k,75,tn) + qc(k,j,i) * &
[2232]	1347	rmask(j,i,sr) * &
	1348	flag
[1822]	1349	sums_l(k,76,tn) = sums_l(k,76,tn) + prr(k,j,i) * &
[2232]	1350	rmask(j,i,sr) * &
	1351	flag
[2292]	1352	IF ( microphysics_morrison ) THEN
	1353	sums_l(k,123,tn) = sums_l(k,123,tn) + nc(k,j,i) * &
	1354	rmask(j,i,sr) *&
	1355	flag
	1356	ENDIF
[1822]	1357	IF ( microphysics_seifert ) THEN
	1358	sums_l(k,73,tn) = sums_l(k,73,tn) + nr(k,j,i) * &
[2232]	1359	rmask(j,i,sr) *&
	1360	flag
[1822]	1361	sums_l(k,74,tn) = sums_l(k,74,tn) + qr(k,j,i) * &
[2232]	1362	rmask(j,i,sr) *&
	1363	flag
[1053]	1364	ENDIF
	1365	ENDIF
[1822]	1366
[1007]	1367	ELSE
[1567]	1368	IF( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[1353]	1369	pts = 0.5_wp * ( vpt(k,j,i) - hom(k,1,44,sr) + &
	1370	vpt(k+1,j,i) - hom(k+1,1,44,sr) )
	1371	sums_l(k,46,tn) = sums_l(k,46,tn) + pts * w(k,j,i) * &
[2037]	1372	heatflux_output_conversion(k) * &
[2232]	1373	rmask(j,i,sr) * &
	1374	flag
[1567]	1375	ELSE IF ( ws_scheme_sca .AND. sr == 0 ) THEN
[2037]	1376	sums_l(k,46,tn) = ( ( 1.0_wp + 0.61_wp * &
	1377	hom(k,1,41,sr) ) * &
	1378	sums_l(k,17,tn) + &
	1379	0.61_wp * hom(k,1,4,sr) * &
	1380	sums_l(k,49,tn) &
[2232]	1381	) * heatflux_output_conversion(k) * &
	1382	flag
[1007]	1383	END IF
	1384	END IF
[1]	1385	ENDIF
	1386	!
	1387	!-- Passive scalar flux
[1353]	1388	IF ( passive_scalar .AND. ( .NOT. ws_scheme_sca &
[1567]	1389	.OR. sr /= 0 ) ) THEN
[2270]	1390	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1391	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1392	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1393	rmask(j,i,sr) * flag
[1]	1394	ENDIF
	1395
	1396	!
	1397	!-- Energy flux we
[667]	1398	!-- has to be adjusted
[1353]	1399	sums_l(k,37,tn) = sums_l(k,37,tn) + w(k,j,i) * 0.5_wp * &
	1400	( ust2 + vst2 + w(k,j,i)**2 ) &
[2674]	1401	* rho_air_zw(k) &
[2037]	1402	* momentumflux_output_conversion(k) &
[2232]	1403	* rmask(j,i,sr) * flag
[1]	1404	ENDDO
	1405	ENDDO
	1406	ENDDO
[2232]	1407	!$OMP END PARALLEL
[709]	1408	!
[2232]	1409	!-- Treat land-surface quantities according to new wall model structure.
	1410	IF ( land_surface ) THEN
	1411	tn = 0
	1412	!$OMP PARALLEL PRIVATE( i, j, m, tn )
	1413	!$ tn = omp_get_thread_num()
	1414	!$OMP DO
	1415	DO m = 1, surf_lsm_h%ns
	1416	i = surf_lsm_h%i(m)
	1417	j = surf_lsm_h%j(m)
	1418
	1419	IF ( i >= nxl .AND. i <= nxr .AND. &
	1420	j >= nys .AND. j <= nyn ) THEN
[2270]	1421	sums_l(nzb,93,tn) = sums_l(nzb,93,tn) + surf_lsm_h%ghf(m)
	1422	sums_l(nzb,94,tn) = sums_l(nzb,94,tn) + surf_lsm_h%qsws_liq(m)
	1423	sums_l(nzb,95,tn) = sums_l(nzb,95,tn) + surf_lsm_h%qsws_soil(m)
	1424	sums_l(nzb,96,tn) = sums_l(nzb,96,tn) + surf_lsm_h%qsws_veg(m)
	1425	sums_l(nzb,97,tn) = sums_l(nzb,97,tn) + surf_lsm_h%r_a(m)
	1426	sums_l(nzb,98,tn) = sums_l(nzb,98,tn)+ surf_lsm_h%r_s(m)
[2232]	1427	ENDIF
	1428	ENDDO
	1429	!$OMP END PARALLEL
	1430
	1431	tn = 0
	1432	!$OMP PARALLEL PRIVATE( i, j, k, m, tn )
	1433	!$ tn = omp_get_thread_num()
	1434	!$OMP DO
	1435	DO m = 1, surf_lsm_h%ns
	1436
	1437	i = surf_lsm_h%i(m)
	1438	j = surf_lsm_h%j(m)
	1439
	1440	IF ( i >= nxl .AND. i <= nxr .AND. &
	1441	j >= nys .AND. j <= nyn ) THEN
	1442
	1443	DO k = nzb_soil, nzt_soil
	1444	sums_l(k,89,tn) = sums_l(k,89,tn) + t_soil_h%var_2d(k,m) &
	1445	* rmask(j,i,sr)
	1446	sums_l(k,91,tn) = sums_l(k,91,tn) + m_soil_h%var_2d(k,m) &
	1447	* rmask(j,i,sr)
	1448	ENDDO
	1449	ENDIF
	1450	ENDDO
	1451	!$OMP END PARALLEL
	1452	ENDIF
	1453	!
[709]	1454	!-- For speed optimization fluxes which have been computed in part directly
	1455	!-- inside the WS advection routines are treated seperatly
	1456	!-- Momentum fluxes first:
[2232]	1457
	1458	tn = 0
	1459	!$OMP PARALLEL PRIVATE( i, j, k, tn, flag )
	1460	!$ tn = omp_get_thread_num()
[743]	1461	IF ( .NOT. ws_scheme_mom .OR. sr /= 0 ) THEN
[2232]	1462	!$OMP DO
	1463	DO i = nxl, nxr
	1464	DO j = nys, nyn
	1465	DO k = nzb, nzt
[1007]	1466	!
[2232]	1467	!-- Flag 23 is used to mask surface fluxes as well as model-top
	1468	!-- fluxes, which are added further below.
	1469	flag = MERGE( 1.0_wp, 0.0_wp, &
	1470	BTEST( wall_flags_0(k,j,i), 23 ) ) * &
	1471	MERGE( 1.0_wp, 0.0_wp, &
	1472	BTEST( wall_flags_0(k,j,i), 9 ) )
	1473
	1474	ust = 0.5_wp * ( u(k,j,i) - hom(k,1,1,sr) + &
	1475	u(k+1,j,i) - hom(k+1,1,1,sr) )
	1476	vst = 0.5_wp * ( v(k,j,i) - hom(k,1,2,sr) + &
	1477	v(k+1,j,i) - hom(k+1,1,2,sr) )
[667]	1478	!
[2232]	1479	!-- Momentum flux wu
	1480	sums_l(k,13,tn) = sums_l(k,13,tn) + 0.5_wp * &
	1481	( w(k,j,i-1) + w(k,j,i) ) &
[2674]	1482	* rho_air_zw(k) &
[2232]	1483	* momentumflux_output_conversion(k) &
	1484	* ust * rmask(j,i,sr) &
	1485	* flag
	1486	!
	1487	!-- Momentum flux wv
	1488	sums_l(k,15,tn) = sums_l(k,15,tn) + 0.5_wp * &
	1489	( w(k,j-1,i) + w(k,j,i) ) &
[2674]	1490	* rho_air_zw(k) &
[2232]	1491	* momentumflux_output_conversion(k) &
	1492	* vst * rmask(j,i,sr) &
	1493	* flag
	1494	ENDDO
	1495	ENDDO
	1496	ENDDO
[1]	1497
[667]	1498	ENDIF
[1567]	1499	IF ( .NOT. ws_scheme_sca .OR. sr /= 0 ) THEN
[2232]	1500	!$OMP DO
	1501	DO i = nxl, nxr
	1502	DO j = nys, nyn
	1503	DO k = nzb, nzt
	1504	flag = MERGE( 1.0_wp, 0.0_wp, &
	1505	BTEST( wall_flags_0(k,j,i), 23 ) ) * &
	1506	MERGE( 1.0_wp, 0.0_wp, &
	1507	BTEST( wall_flags_0(k,j,i), 9 ) )
[709]	1508	!
[2232]	1509	!-- Vertical heat flux
	1510	sums_l(k,17,tn) = sums_l(k,17,tn) + 0.5_wp * &
[1353]	1511	( pt(k,j,i) - hom(k,1,4,sr) + &
	1512	pt(k+1,j,i) - hom(k+1,1,4,sr) ) &
[2037]	1513	* heatflux_output_conversion(k) &
[2232]	1514	* w(k,j,i) * rmask(j,i,sr) * flag
	1515	IF ( humidity ) THEN
	1516	pts = 0.5_wp * ( q(k,j,i) - hom(k,1,41,sr) + &
[1353]	1517	q(k+1,j,i) - hom(k+1,1,41,sr) )
[2232]	1518	sums_l(k,49,tn) = sums_l(k,49,tn) + pts * w(k,j,i) * &
[2037]	1519	waterflux_output_conversion(k) * &
[2232]	1520	rmask(j,i,sr) * flag
	1521	ENDIF
	1522	IF ( passive_scalar ) THEN
[2270]	1523	pts = 0.5_wp * ( s(k,j,i) - hom(k,1,115,sr) + &
	1524	s(k+1,j,i) - hom(k+1,1,115,sr) )
	1525	sums_l(k,114,tn) = sums_l(k,114,tn) + pts * w(k,j,i) * &
[2232]	1526	rmask(j,i,sr) * flag
	1527	ENDIF
	1528	ENDDO
	1529	ENDDO
	1530	ENDDO
[667]	1531
	1532	ENDIF
	1533
[1]	1534	!
[97]	1535	!-- Density at top follows Neumann condition
[388]	1536	IF ( ocean ) THEN
	1537	sums_l(nzt+1,64,tn) = sums_l(nzt,64,tn)
	1538	sums_l(nzt+1,71,tn) = sums_l(nzt,71,tn)
	1539	ENDIF
[97]	1540
	1541	!
[1]	1542	!-- Divergence of vertical flux of resolved scale energy and pressure
[106]	1543	!-- fluctuations as well as flux of pressure fluctuation itself (68).
	1544	!-- First calculate the products, then the divergence.
[1]	1545	!-- Calculation is time consuming. Do it only, if profiles shall be plotted.
[1691]	1546	IF ( hom(nzb+1,2,55,0) /= 0.0_wp .OR. hom(nzb+1,2,68,0) /= 0.0_wp ) &
	1547	THEN
[1353]	1548	sums_ll = 0.0_wp ! local array
[1]	1549
	1550	!$OMP DO
	1551	DO i = nxl, nxr
	1552	DO j = nys, nyn
[2232]	1553	DO k = nzb+1, nzt
	1554	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
[1]	1555
[1353]	1556	sums_ll(k,1) = sums_ll(k,1) + 0.5_wp * w(k,j,i) * ( &
[1652]	1557	( 0.25_wp * ( u(k,j,i)+u(k+1,j,i)+u(k,j,i+1)+u(k+1,j,i+1) ) &
	1558	- 0.5_wp * ( hom(k,1,1,sr) + hom(k+1,1,1,sr) ) )**2&
	1559	+ ( 0.25_wp * ( v(k,j,i)+v(k+1,j,i)+v(k,j+1,i)+v(k+1,j+1,i) ) &
[1654]	1560	- 0.5_wp * ( hom(k,1,2,sr) + hom(k+1,1,2,sr) ) )**2&
[2232]	1561	+ w(k,j,i)*2 ) flag
[1]	1562
[1353]	1563	sums_ll(k,2) = sums_ll(k,2) + 0.5_wp * w(k,j,i) &
[2252]	1564	* ( ( p(k,j,i) + p(k+1,j,i) ) &
	1565	/ momentumflux_output_conversion(k) ) &
	1566	* flag
[1]	1567
	1568	ENDDO
	1569	ENDDO
	1570	ENDDO
[1353]	1571	sums_ll(0,1) = 0.0_wp ! because w is zero at the bottom
	1572	sums_ll(nzt+1,1) = 0.0_wp
	1573	sums_ll(0,2) = 0.0_wp
	1574	sums_ll(nzt+1,2) = 0.0_wp
[1]	1575
[678]	1576	DO k = nzb+1, nzt
[1]	1577	sums_l(k,55,tn) = ( sums_ll(k,1) - sums_ll(k-1,1) ) * ddzw(k)
	1578	sums_l(k,56,tn) = ( sums_ll(k,2) - sums_ll(k-1,2) ) * ddzw(k)
[106]	1579	sums_l(k,68,tn) = sums_ll(k,2)
[1]	1580	ENDDO
	1581	sums_l(nzb,55,tn) = sums_l(nzb+1,55,tn)
	1582	sums_l(nzb,56,tn) = sums_l(nzb+1,56,tn)
[1353]	1583	sums_l(nzb,68,tn) = 0.0_wp ! because w* = 0 at nzb
[1]	1584
	1585	ENDIF
	1586
	1587	!
[106]	1588	!-- Divergence of vertical flux of SGS TKE and the flux itself (69)
[1691]	1589	IF ( hom(nzb+1,2,57,0) /= 0.0_wp .OR. hom(nzb+1,2,69,0) /= 0.0_wp ) &
	1590	THEN
[1]	1591	!$OMP DO
	1592	DO i = nxl, nxr
	1593	DO j = nys, nyn
[2232]	1594	DO k = nzb+1, nzt
[1]	1595
[2232]	1596	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
	1597
[1353]	1598	sums_l(k,57,tn) = sums_l(k,57,tn) - 0.5_wp * ( &
[1]	1599	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
	1600	- (km(k-1,j,i)+km(k,j,i)) * (e(k,j,i)-e(k-1,j,i)) * ddzu(k) &
[2232]	1601	) * ddzw(k) &
	1602	* flag
[1]	1603
[1353]	1604	sums_l(k,69,tn) = sums_l(k,69,tn) - 0.5_wp * ( &
[106]	1605	(km(k,j,i)+km(k+1,j,i)) * (e(k+1,j,i)-e(k,j,i)) * ddzu(k+1) &
[2232]	1606	) * flag
[106]	1607
[1]	1608	ENDDO
	1609	ENDDO
	1610	ENDDO
	1611	sums_l(nzb,57,tn) = sums_l(nzb+1,57,tn)
[106]	1612	sums_l(nzb,69,tn) = sums_l(nzb+1,69,tn)
[1]	1613
	1614	ENDIF
	1615
	1616	!
	1617	!-- Horizontal heat fluxes (subgrid, resolved, total).
	1618	!-- Do it only, if profiles shall be plotted.
[1353]	1619	IF ( hom(nzb+1,2,58,0) /= 0.0_wp ) THEN
[1]	1620
	1621	!$OMP DO
	1622	DO i = nxl, nxr
	1623	DO j = nys, nyn
[2232]	1624	DO k = nzb+1, nzt
	1625	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
[1]	1626	!
	1627	!-- Subgrid horizontal heat fluxes u"pt", v"pt"
[1353]	1628	sums_l(k,58,tn) = sums_l(k,58,tn) - 0.5_wp * &
[1]	1629	( kh(k,j,i) + kh(k,j,i-1) ) &
	1630	* ( pt(k,j,i-1) - pt(k,j,i) ) &
[2037]	1631	* rho_air_zw(k) &
	1632	* heatflux_output_conversion(k) &
[2232]	1633	* ddx * rmask(j,i,sr) * flag
[1353]	1634	sums_l(k,61,tn) = sums_l(k,61,tn) - 0.5_wp * &
[1]	1635	( kh(k,j,i) + kh(k,j-1,i) ) &
	1636	* ( pt(k,j-1,i) - pt(k,j,i) ) &
[2037]	1637	* rho_air_zw(k) &
	1638	* heatflux_output_conversion(k) &
[2232]	1639	* ddy * rmask(j,i,sr) * flag
[1]	1640	!
	1641	!-- Resolved horizontal heat fluxes upt, vpt
	1642	sums_l(k,59,tn) = sums_l(k,59,tn) + &
	1643	( u(k,j,i) - hom(k,1,1,sr) ) &
[1353]	1644	* 0.5_wp * ( pt(k,j,i-1) - hom(k,1,4,sr) + &
[2037]	1645	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1646	* heatflux_output_conversion(k) &
	1647	* flag
[1353]	1648	pts = 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
	1649	pt(k,j,i) - hom(k,1,4,sr) )
[1]	1650	sums_l(k,62,tn) = sums_l(k,62,tn) + &
	1651	( v(k,j,i) - hom(k,1,2,sr) ) &
[1353]	1652	* 0.5_wp * ( pt(k,j-1,i) - hom(k,1,4,sr) + &
[2037]	1653	pt(k,j,i) - hom(k,1,4,sr) ) &
[2232]	1654	* heatflux_output_conversion(k) &
	1655	* flag
[1]	1656	ENDDO
	1657	ENDDO
	1658	ENDDO
	1659	!
	1660	!-- Fluxes at the surface must be zero (e.g. due to the Prandtl-layer)
[1353]	1661	sums_l(nzb,58,tn) = 0.0_wp
	1662	sums_l(nzb,59,tn) = 0.0_wp
	1663	sums_l(nzb,60,tn) = 0.0_wp
	1664	sums_l(nzb,61,tn) = 0.0_wp
	1665	sums_l(nzb,62,tn) = 0.0_wp
	1666	sums_l(nzb,63,tn) = 0.0_wp
[1]	1667
	1668	ENDIF
[2073]	1669	!$OMP END PARALLEL
[87]	1670
	1671	!
[1365]	1672	!-- Collect current large scale advection and subsidence tendencies for
	1673	!-- data output
[1691]	1674	IF ( large_scale_forcing .AND. ( simulated_time > 0.0_wp ) ) THEN
[1365]	1675	!
	1676	!-- Interpolation in time of LSF_DATA
	1677	nt = 1
[1386]	1678	DO WHILE ( simulated_time - dt_3d > time_vert(nt) )
[1365]	1679	nt = nt + 1
	1680	ENDDO
[1386]	1681	IF ( simulated_time - dt_3d /= time_vert(nt) ) THEN
[1365]	1682	nt = nt - 1
	1683	ENDIF
	1684
[1386]	1685	fac = ( simulated_time - dt_3d - time_vert(nt) ) &
[1365]	1686	/ ( time_vert(nt+1)-time_vert(nt) )
	1687
	1688
	1689	DO k = nzb, nzt
[1382]	1690	sums_ls_l(k,0) = td_lsa_lpt(k,nt) &
	1691	+ fac * ( td_lsa_lpt(k,nt+1) - td_lsa_lpt(k,nt) )
	1692	sums_ls_l(k,1) = td_lsa_q(k,nt) &
	1693	+ fac * ( td_lsa_q(k,nt+1) - td_lsa_q(k,nt) )
[1365]	1694	ENDDO
	1695
[1382]	1696	sums_ls_l(nzt+1,0) = sums_ls_l(nzt,0)
	1697	sums_ls_l(nzt+1,1) = sums_ls_l(nzt,1)
	1698
[1365]	1699	IF ( large_scale_subsidence .AND. use_subsidence_tendencies ) THEN
	1700
	1701	DO k = nzb, nzt
[1382]	1702	sums_ls_l(k,2) = td_sub_lpt(k,nt) + fac * &
	1703	( td_sub_lpt(k,nt+1) - td_sub_lpt(k,nt) )
	1704	sums_ls_l(k,3) = td_sub_q(k,nt) + fac * &
	1705	( td_sub_q(k,nt+1) - td_sub_q(k,nt) )
[1365]	1706	ENDDO
	1707
[1382]	1708	sums_ls_l(nzt+1,2) = sums_ls_l(nzt,2)
	1709	sums_ls_l(nzt+1,3) = sums_ls_l(nzt,3)
	1710
[1365]	1711	ENDIF
	1712
	1713	ENDIF
	1714
[2232]	1715	tn = 0
[2073]	1716	!$OMP PARALLEL PRIVATE( i, j, k, tn )
[2232]	1717	!$ tn = omp_get_thread_num()
[1585]	1718	IF ( radiation .AND. radiation_scheme == 'rrtmg' ) THEN
	1719	!$OMP DO
	1720	DO i = nxl, nxr
	1721	DO j = nys, nyn
[2232]	1722	DO k = nzb+1, nzt+1
	1723	flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_0(k,j,i), 0 ) )
	1724
[2270]	1725	sums_l(k,100,tn) = sums_l(k,100,tn) + rad_lw_in(k,j,i) &
[2232]	1726	* rmask(j,i,sr) * flag
[2270]	1727	sums_l(k,101,tn) = sums_l(k,101,tn) + rad_lw_out(k,j,i) &
[2232]	1728	* rmask(j,i,sr) * flag
[2270]	1729	sums_l(k,102,tn) = sums_l(k,102,tn) + rad_sw_in(k,j,i) &
[2232]	1730	* rmask(j,i,sr) * flag
[2270]	1731	sums_l(k,103,tn) = sums_l(k,103,tn) + rad_sw_out(k,j,i) &
[2232]	1732	* rmask(j,i,sr) * flag
[2270]	1733	sums_l(k,104,tn) = sums_l(k,104,tn) + rad_lw_cs_hr(k,j,i) &
[2232]	1734	* rmask(j,i,sr) * flag
[2270]	1735	sums_l(k,105,tn) = sums_l(k,105,tn) + rad_lw_hr(k,j,i) &
[2232]	1736	* rmask(j,i,sr) * flag
[2270]	1737	sums_l(k,106,tn) = sums_l(k,106,tn) + rad_sw_cs_hr(k,j,i) &
[2232]	1738	* rmask(j,i,sr) * flag
[2270]	1739	sums_l(k,107,tn) = sums_l(k,107,tn) + rad_sw_hr(k,j,i) &
[2232]	1740	* rmask(j,i,sr) * flag
[1585]	1741	ENDDO
	1742	ENDDO
	1743	ENDDO
	1744	ENDIF
[1365]	1745	!
[87]	1746	!-- Calculate the user-defined profiles
	1747	CALL user_statistics( 'profiles', sr, tn )
[1]	1748	!$OMP END PARALLEL
	1749
	1750	!
	1751	!-- Summation of thread sums
	1752	IF ( threads_per_task > 1 ) THEN
	1753	DO i = 1, threads_per_task-1
	1754	sums_l(:,3,0) = sums_l(:,3,0) + sums_l(:,3,i)
	1755	sums_l(:,4:40,0) = sums_l(:,4:40,0) + sums_l(:,4:40,i)
[87]	1756	sums_l(:,45:pr_palm,0) = sums_l(:,45:pr_palm,0) + &
	1757	sums_l(:,45:pr_palm,i)
	1758	IF ( max_pr_user > 0 ) THEN
	1759	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) = &
	1760	sums_l(:,pr_palm+1:pr_palm+max_pr_user,0) + &
	1761	sums_l(:,pr_palm+1:pr_palm+max_pr_user,i)
	1762	ENDIF
[1]	1763	ENDDO
	1764	ENDIF
	1765
	1766	#if defined( __parallel )
[667]	1767
[1]	1768	!
	1769	!-- Compute total sum from local sums
[622]	1770	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[1365]	1771	CALL MPI_ALLREDUCE( sums_l(nzb,1,0), sums(nzb,1), ngp_sums, MPI_REAL, &
[1]	1772	MPI_SUM, comm2d, ierr )
[1365]	1773	IF ( large_scale_forcing ) THEN
	1774	CALL MPI_ALLREDUCE( sums_ls_l(nzb,2), sums(nzb,83), ngp_sums_ls, &
	1775	MPI_REAL, MPI_SUM, comm2d, ierr )
	1776	ENDIF
[1]	1777	#else
	1778	sums = sums_l(:,:,0)
[1365]	1779	IF ( large_scale_forcing ) THEN
	1780	sums(:,81:88) = sums_ls_l
	1781	ENDIF
[1]	1782	#endif
	1783
	1784	!
	1785	!-- Final values are obtained by division by the total number of grid points
	1786	!-- used for summation. After that store profiles.
[1738]	1787	!-- Check, if statistical regions do contain at least one grid point at the
	1788	!-- respective k-level, otherwise division by zero will lead to undefined
	1789	!-- values, which may cause e.g. problems with NetCDF output
[1]	1790	!-- Profiles:
	1791	DO k = nzb, nzt+1
[1738]	1792	sums(k,3) = sums(k,3) / ngp_2dh(sr)
	1793	sums(k,12:22) = sums(k,12:22) / ngp_2dh(sr)
	1794	sums(k,30:32) = sums(k,30:32) / ngp_2dh(sr)
	1795	sums(k,35:39) = sums(k,35:39) / ngp_2dh(sr)
	1796	sums(k,45:53) = sums(k,45:53) / ngp_2dh(sr)
	1797	sums(k,55:63) = sums(k,55:63) / ngp_2dh(sr)
	1798	sums(k,81:88) = sums(k,81:88) / ngp_2dh(sr)
[2270]	1799	sums(k,89:112) = sums(k,89:112) / ngp_2dh(sr)
	1800	sums(k,114) = sums(k,114) / ngp_2dh(sr)
	1801	sums(k,117) = sums(k,117) / ngp_2dh(sr)
[1738]	1802	IF ( ngp_2dh_s_inner(k,sr) /= 0 ) THEN
	1803	sums(k,8:11) = sums(k,8:11) / ngp_2dh_s_inner(k,sr)
	1804	sums(k,23:29) = sums(k,23:29) / ngp_2dh_s_inner(k,sr)
	1805	sums(k,33:34) = sums(k,33:34) / ngp_2dh_s_inner(k,sr)
	1806	sums(k,40) = sums(k,40) / ngp_2dh_s_inner(k,sr)
	1807	sums(k,54) = sums(k,54) / ngp_2dh_s_inner(k,sr)
	1808	sums(k,64) = sums(k,64) / ngp_2dh_s_inner(k,sr)
	1809	sums(k,70:80) = sums(k,70:80) / ngp_2dh_s_inner(k,sr)
[2270]	1810	sums(k,116) = sums(k,116) / ngp_2dh_s_inner(k,sr)
	1811	sums(k,118:pr_palm-2) = sums(k,118:pr_palm-2) / ngp_2dh_s_inner(k,sr)
[1738]	1812	ENDIF
[1]	1813	ENDDO
[667]	1814
[1]	1815	!-- u* and so on
[87]	1816	!-- As sums(nzb:nzb+3,pr_palm) are full 2D arrays (us, usws, vsws, ts) whose
[1]	1817	!-- size is always ( nx + 1 ) * ( ny + 1 ), defined at the first grid layer
	1818	!-- above the topography, they are being divided by ngp_2dh(sr)
[87]	1819	sums(nzb:nzb+3,pr_palm) = sums(nzb:nzb+3,pr_palm) / &
[1]	1820	ngp_2dh(sr)
[197]	1821	sums(nzb+12,pr_palm) = sums(nzb+12,pr_palm) / & ! qs
	1822	ngp_2dh(sr)
[1960]	1823	sums(nzb+13,pr_palm) = sums(nzb+13,pr_palm) / & ! ss
	1824	ngp_2dh(sr)
[2773]	1825	sums(nzb+14,pr_palm) = sums(nzb+14,pr_palm) / & ! surface temperature
	1826	ngp_2dh(sr)
[1]	1827	!-- eges, e*
[87]	1828	sums(nzb+4:nzb+5,pr_palm) = sums(nzb+4:nzb+5,pr_palm) / &
[132]	1829	ngp_3d(sr)
[1]	1830	!-- Old and new divergence
[87]	1831	sums(nzb+9:nzb+10,pr_palm) = sums(nzb+9:nzb+10,pr_palm) / &
[1]	1832	ngp_3d_inner(sr)
	1833
[87]	1834	!-- User-defined profiles
	1835	IF ( max_pr_user > 0 ) THEN
	1836	DO k = nzb, nzt+1
	1837	sums(k,pr_palm+1:pr_palm+max_pr_user) = &
	1838	sums(k,pr_palm+1:pr_palm+max_pr_user) / &
[132]	1839	ngp_2dh_s_inner(k,sr)
[87]	1840	ENDDO
	1841	ENDIF
[1007]	1842
[1]	1843	!
	1844	!-- Collect horizontal average in hom.
	1845	!-- Compute deduced averages (e.g. total heat flux)
	1846	hom(:,1,3,sr) = sums(:,3) ! w
	1847	hom(:,1,8,sr) = sums(:,8) ! e profiles 5-7 are initial profiles
	1848	hom(:,1,9,sr) = sums(:,9) ! km
	1849	hom(:,1,10,sr) = sums(:,10) ! kh
	1850	hom(:,1,11,sr) = sums(:,11) ! l
	1851	hom(:,1,12,sr) = sums(:,12) ! w"u"
	1852	hom(:,1,13,sr) = sums(:,13) ! wu
	1853	hom(:,1,14,sr) = sums(:,14) ! w"v"
	1854	hom(:,1,15,sr) = sums(:,15) ! wv
	1855	hom(:,1,16,sr) = sums(:,16) ! w"pt"
	1856	hom(:,1,17,sr) = sums(:,17) ! wpt
	1857	hom(:,1,18,sr) = sums(:,16) + sums(:,17) ! wpt
	1858	hom(:,1,19,sr) = sums(:,12) + sums(:,13) ! wu
	1859	hom(:,1,20,sr) = sums(:,14) + sums(:,15) ! wv
	1860	hom(:,1,21,sr) = sums(:,21) ! wptBC
	1861	hom(:,1,22,sr) = sums(:,16) + sums(:,21) ! wptBC
[96]	1862	! profile 24 is initial profile (sa)
	1863	! profiles 25-29 left empty for initial
[1]	1864	! profiles
	1865	hom(:,1,30,sr) = sums(:,30) ! u*2
	1866	hom(:,1,31,sr) = sums(:,31) ! v*2
	1867	hom(:,1,32,sr) = sums(:,32) ! w*2
	1868	hom(:,1,33,sr) = sums(:,33) ! pt*2
	1869	hom(:,1,34,sr) = sums(:,34) ! e*
	1870	hom(:,1,35,sr) = sums(:,35) ! w2pt
	1871	hom(:,1,36,sr) = sums(:,36) ! wpt2
	1872	hom(:,1,37,sr) = sums(:,37) ! we
	1873	hom(:,1,38,sr) = sums(:,38) ! w*3
[1353]	1874	hom(:,1,39,sr) = sums(:,38) / ( abs( sums(:,32) ) + 1E-20_wp )**1.5_wp ! Sw
[1]	1875	hom(:,1,40,sr) = sums(:,40) ! p
[531]	1876	hom(:,1,45,sr) = sums(:,45) ! w"vpt"
[1]	1877	hom(:,1,46,sr) = sums(:,46) ! wvpt
	1878	hom(:,1,47,sr) = sums(:,45) + sums(:,46) ! wvpt
	1879	hom(:,1,48,sr) = sums(:,48) ! w"q" (w"qv")
	1880	hom(:,1,49,sr) = sums(:,49) ! wq (wqv)
	1881	hom(:,1,50,sr) = sums(:,48) + sums(:,49) ! wq (wqv)
	1882	hom(:,1,51,sr) = sums(:,51) ! w"qv"
	1883	hom(:,1,52,sr) = sums(:,52) ! wqv
	1884	hom(:,1,53,sr) = sums(:,52) + sums(:,51) ! wq (wqv)
	1885	hom(:,1,54,sr) = sums(:,54) ! ql
	1886	hom(:,1,55,sr) = sums(:,55) ! wuu*/dz
	1887	hom(:,1,56,sr) = sums(:,56) ! wp/dz
[2031]	1888	hom(:,1,57,sr) = sums(:,57) ! ( w"e + w"p"/rho_ocean )/dz
[1]	1889	hom(:,1,58,sr) = sums(:,58) ! u"pt"
	1890	hom(:,1,59,sr) = sums(:,59) ! upt
	1891	hom(:,1,60,sr) = sums(:,58) + sums(:,59) ! upt_t
	1892	hom(:,1,61,sr) = sums(:,61) ! v"pt"
	1893	hom(:,1,62,sr) = sums(:,62) ! vpt
	1894	hom(:,1,63,sr) = sums(:,61) + sums(:,62) ! vpt_t
[2031]	1895	hom(:,1,64,sr) = sums(:,64) ! rho_ocean
[96]	1896	hom(:,1,65,sr) = sums(:,65) ! w"sa"
	1897	hom(:,1,66,sr) = sums(:,66) ! wsa
	1898	hom(:,1,67,sr) = sums(:,65) + sums(:,66) ! wsa
[106]	1899	hom(:,1,68,sr) = sums(:,68) ! wp
[2031]	1900	hom(:,1,69,sr) = sums(:,69) ! w"e + w"p"/rho_ocean
[197]	1901	hom(:,1,70,sr) = sums(:,70) ! q*2
[388]	1902	hom(:,1,71,sr) = sums(:,71) ! prho
[2252]	1903	hom(:,1,72,sr) = hyp * 1E-2_wp ! hyp in hPa
[2292]	1904	hom(:,1,123,sr) = sums(:,123) ! nc
[1053]	1905	hom(:,1,73,sr) = sums(:,73) ! nr
	1906	hom(:,1,74,sr) = sums(:,74) ! qr
	1907	hom(:,1,75,sr) = sums(:,75) ! qc
	1908	hom(:,1,76,sr) = sums(:,76) ! prr (precipitation rate)
[1179]	1909	! 77 is initial density profile
[1241]	1910	hom(:,1,78,sr) = ug ! ug
	1911	hom(:,1,79,sr) = vg ! vg
[1299]	1912	hom(:,1,80,sr) = w_subs ! w_subs
[1]	1913
[1365]	1914	IF ( large_scale_forcing ) THEN
[1382]	1915	hom(:,1,81,sr) = sums_ls_l(:,0) ! td_lsa_lpt
	1916	hom(:,1,82,sr) = sums_ls_l(:,1) ! td_lsa_q
[1365]	1917	IF ( use_subsidence_tendencies ) THEN
[1382]	1918	hom(:,1,83,sr) = sums_ls_l(:,2) ! td_sub_lpt
	1919	hom(:,1,84,sr) = sums_ls_l(:,3) ! td_sub_q
[1365]	1920	ELSE
[1382]	1921	hom(:,1,83,sr) = sums(:,83) ! td_sub_lpt
	1922	hom(:,1,84,sr) = sums(:,84) ! td_sub_q
[1365]	1923	ENDIF
[1382]	1924	hom(:,1,85,sr) = sums(:,85) ! td_nud_lpt
	1925	hom(:,1,86,sr) = sums(:,86) ! td_nud_q
	1926	hom(:,1,87,sr) = sums(:,87) ! td_nud_u
	1927	hom(:,1,88,sr) = sums(:,88) ! td_nud_v
[1365]	1928	ENDIF
	1929
[1551]	1930	IF ( land_surface ) THEN
	1931	hom(:,1,89,sr) = sums(:,89) ! t_soil
	1932	! 90 is initial t_soil profile
	1933	hom(:,1,91,sr) = sums(:,91) ! m_soil
	1934	! 92 is initial m_soil profile
[2270]	1935	hom(:,1,93,sr) = sums(:,93) ! ghf
	1936	hom(:,1,94,sr) = sums(:,94) ! qsws_liq
	1937	hom(:,1,95,sr) = sums(:,95) ! qsws_soil
	1938	hom(:,1,96,sr) = sums(:,96) ! qsws_veg
	1939	hom(:,1,97,sr) = sums(:,97) ! r_a
	1940	hom(:,1,98,sr) = sums(:,98) ! r_s
[1555]	1941
[1551]	1942	ENDIF
	1943
	1944	IF ( radiation ) THEN
[2270]	1945	hom(:,1,99,sr) = sums(:,99) ! rad_net
	1946	hom(:,1,100,sr) = sums(:,100) ! rad_lw_in
	1947	hom(:,1,101,sr) = sums(:,101) ! rad_lw_out
	1948	hom(:,1,102,sr) = sums(:,102) ! rad_sw_in
	1949	hom(:,1,103,sr) = sums(:,103) ! rad_sw_out
[1585]	1950
[1691]	1951	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	1952	hom(:,1,104,sr) = sums(:,104) ! rad_lw_cs_hr
	1953	hom(:,1,105,sr) = sums(:,105) ! rad_lw_hr
	1954	hom(:,1,106,sr) = sums(:,106) ! rad_sw_cs_hr
	1955	hom(:,1,107,sr) = sums(:,107) ! rad_sw_hr
[1691]	1956
[2270]	1957	hom(:,1,108,sr) = sums(:,108) ! rrtm_aldif
	1958	hom(:,1,109,sr) = sums(:,109) ! rrtm_aldir
	1959	hom(:,1,110,sr) = sums(:,110) ! rrtm_asdif
	1960	hom(:,1,111,sr) = sums(:,111) ! rrtm_asdir
[1585]	1961	ENDIF
[1551]	1962	ENDIF
	1963
[2270]	1964	hom(:,1,112,sr) = sums(:,112) !: L
[1691]	1965
[1960]	1966	IF ( passive_scalar ) THEN
[2270]	1967	hom(:,1,117,sr) = sums(:,117) ! w"s"
	1968	hom(:,1,114,sr) = sums(:,114) ! ws
	1969	hom(:,1,118,sr) = sums(:,117) + sums(:,114) ! ws
	1970	hom(:,1,116,sr) = sums(:,116) ! s*2
[1960]	1971	ENDIF
	1972
[2270]	1973	hom(:,1,119,sr) = rho_air ! rho_air in Kg/m^3
	1974	hom(:,1,120,sr) = rho_air_zw ! rho_air_zw in Kg/m^3
[2037]	1975
[667]	1976	hom(:,1,pr_palm,sr) = sums(:,pr_palm)
[1]	1977	! u, w'u', w'v', t (in last profile)
	1978
[87]	1979	IF ( max_pr_user > 0 ) THEN ! user-defined profiles
	1980	hom(:,1,pr_palm+1:pr_palm+max_pr_user,sr) = &
	1981	sums(:,pr_palm+1:pr_palm+max_pr_user)
	1982	ENDIF
	1983
[1]	1984	!
	1985	!-- Determine the boundary layer height using two different schemes.
[94]	1986	!-- First scheme: Starting from the Earth's (Ocean's) surface, look for the
	1987	!-- first relative minimum (maximum) of the total heat flux.
	1988	!-- The corresponding height is assumed as the boundary layer height, if it
	1989	!-- is less than 1.5 times the height where the heat flux becomes negative
	1990	!-- (positive) for the first time.
[1353]	1991	z_i(1) = 0.0_wp
[1]	1992	first = .TRUE.
[667]	1993
[97]	1994	IF ( ocean ) THEN
	1995	DO k = nzt, nzb+1, -1
[1738]	1996	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
[97]	1997	first = .FALSE.
	1998	height = zw(k)
	1999	ENDIF
[1738]	2000	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
[97]	2001	hom(k-1,1,18,sr) > hom(k,1,18,sr) ) THEN
[1353]	2002	IF ( zw(k) < 1.5_wp * height ) THEN
[97]	2003	z_i(1) = zw(k)
	2004	ELSE
	2005	z_i(1) = height
	2006	ENDIF
	2007	EXIT
	2008	ENDIF
	2009	ENDDO
	2010	ELSE
[94]	2011	DO k = nzb, nzt-1
[1738]	2012	IF ( first .AND. hom(k,1,18,sr) < -1.0E-8_wp ) THEN
[94]	2013	first = .FALSE.
	2014	height = zw(k)
[1]	2015	ENDIF
[1738]	2016	IF ( hom(k,1,18,sr) < -1.0E-8_wp .AND. &
[94]	2017	hom(k+1,1,18,sr) > hom(k,1,18,sr) ) THEN
[1353]	2018	IF ( zw(k) < 1.5_wp * height ) THEN
[94]	2019	z_i(1) = zw(k)
	2020	ELSE
	2021	z_i(1) = height
	2022	ENDIF
	2023	EXIT
	2024	ENDIF
	2025	ENDDO
[97]	2026	ENDIF
[1]	2027
	2028	!
[291]	2029	!-- Second scheme: Gradient scheme from Sullivan et al. (1998), modified
	2030	!-- by Uhlenbrock(2006). The boundary layer height is the height with the
	2031	!-- maximal local temperature gradient: starting from the second (the last
	2032	!-- but one) vertical gridpoint, the local gradient must be at least
	2033	!-- 0.2K/100m and greater than the next four gradients.
	2034	!-- WARNING: The threshold value of 0.2K/100m must be adjusted for the
	2035	!-- ocean case!
[1353]	2036	z_i(2) = 0.0_wp
[291]	2037	DO k = nzb+1, nzt+1
	2038	dptdz(k) = ( hom(k,1,4,sr) - hom(k-1,1,4,sr) ) * ddzu(k)
	2039	ENDDO
[1322]	2040	dptdz_threshold = 0.2_wp / 100.0_wp
[291]	2041
[97]	2042	IF ( ocean ) THEN
[291]	2043	DO k = nzt+1, nzb+5, -1
	2044	IF ( dptdz(k) > dptdz_threshold .AND. &
	2045	dptdz(k) > dptdz(k-1) .AND. dptdz(k) > dptdz(k-2) .AND. &
	2046	dptdz(k) > dptdz(k-3) .AND. dptdz(k) > dptdz(k-4) ) THEN
	2047	z_i(2) = zw(k-1)
[97]	2048	EXIT
	2049	ENDIF
	2050	ENDDO
	2051	ELSE
[291]	2052	DO k = nzb+1, nzt-3
	2053	IF ( dptdz(k) > dptdz_threshold .AND. &
	2054	dptdz(k) > dptdz(k+1) .AND. dptdz(k) > dptdz(k+2) .AND. &
	2055	dptdz(k) > dptdz(k+3) .AND. dptdz(k) > dptdz(k+4) ) THEN
	2056	z_i(2) = zw(k-1)
[97]	2057	EXIT
	2058	ENDIF
	2059	ENDDO
	2060	ENDIF
[1]	2061
[87]	2062	hom(nzb+6,1,pr_palm,sr) = z_i(1)
	2063	hom(nzb+7,1,pr_palm,sr) = z_i(2)
[1]	2064
	2065	!
[1738]	2066	!-- Determine vertical index which is nearest to the mean surface level
	2067	!-- height of the respective statistic region
	2068	DO k = nzb, nzt
	2069	IF ( zw(k) >= mean_surface_level_height(sr) ) THEN
	2070	k_surface_level = k
	2071	EXIT
	2072	ENDIF
	2073	ENDDO
	2074	!
[1]	2075	!-- Computation of both the characteristic vertical velocity and
	2076	!-- the characteristic convective boundary layer temperature.
[1738]	2077	!-- The inversion height entering into the equation is defined with respect
	2078	!-- to the mean surface level height of the respective statistic region.
	2079	!-- The horizontal average at surface level index + 1 is input for the
	2080	!-- average temperature.
	2081	IF ( hom(k_surface_level,1,18,sr) > 1.0E-8_wp .AND. z_i(1) /= 0.0_wp )&
	2082	THEN
[2252]	2083	hom(nzb+8,1,pr_palm,sr) = &
[2037]	2084	( g / hom(k_surface_level+1,1,4,sr) * &
[2252]	2085	( hom(k_surface_level,1,18,sr) / &
	2086	( heatflux_output_conversion(nzb) * rho_air(nzb) ) ) &
[1738]	2087	* ABS( z_i(1) - mean_surface_level_height(sr) ) )**0.333333333_wp
[1]	2088	ELSE
[1353]	2089	hom(nzb+8,1,pr_palm,sr) = 0.0_wp
[1]	2090	ENDIF
	2091
[48]	2092	!
	2093	!-- Collect the time series quantities
[87]	2094	ts_value(1,sr) = hom(nzb+4,1,pr_palm,sr) ! E
	2095	ts_value(2,sr) = hom(nzb+5,1,pr_palm,sr) ! E*
[48]	2096	ts_value(3,sr) = dt_3d
[87]	2097	ts_value(4,sr) = hom(nzb,1,pr_palm,sr) ! u*
	2098	ts_value(5,sr) = hom(nzb+3,1,pr_palm,sr) ! th*
[48]	2099	ts_value(6,sr) = u_max
	2100	ts_value(7,sr) = v_max
	2101	ts_value(8,sr) = w_max
[87]	2102	ts_value(9,sr) = hom(nzb+10,1,pr_palm,sr) ! new divergence
	2103	ts_value(10,sr) = hom(nzb+9,1,pr_palm,sr) ! old Divergence
	2104	ts_value(11,sr) = hom(nzb+6,1,pr_palm,sr) ! z_i(1)
	2105	ts_value(12,sr) = hom(nzb+7,1,pr_palm,sr) ! z_i(2)
	2106	ts_value(13,sr) = hom(nzb+8,1,pr_palm,sr) ! w*
[48]	2107	ts_value(14,sr) = hom(nzb,1,16,sr) ! w'pt' at k=0
	2108	ts_value(15,sr) = hom(nzb+1,1,16,sr) ! w'pt' at k=1
	2109	ts_value(16,sr) = hom(nzb+1,1,18,sr) ! wpt at k=1
[2773]	2110	ts_value(17,sr) = hom(nzb+14,1,pr_palm,sr) ! pt(0)
[48]	2111	ts_value(18,sr) = hom(nzb+1,1,4,sr) ! pt(zp)
[197]	2112	ts_value(19,sr) = hom(nzb+1,1,pr_palm,sr) ! u'w' at k=0
	2113	ts_value(20,sr) = hom(nzb+2,1,pr_palm,sr) ! v'w' at k=0
[343]	2114	ts_value(21,sr) = hom(nzb,1,48,sr) ! w"q" at k=0
[1709]	2115
	2116	IF ( .NOT. neutral ) THEN
[2270]	2117	ts_value(22,sr) = hom(nzb,1,112,sr) ! L
[48]	2118	ELSE
[1709]	2119	ts_value(22,sr) = 1.0E10_wp
[48]	2120	ENDIF
[1]	2121
[343]	2122	ts_value(23,sr) = hom(nzb+12,1,pr_palm,sr) ! q*
[1551]	2123
[1960]	2124	IF ( passive_scalar ) THEN
[2270]	2125	ts_value(24,sr) = hom(nzb+13,1,117,sr) ! w"s" ( to do ! )
[1960]	2126	ts_value(25,sr) = hom(nzb+13,1,pr_palm,sr) ! s*
	2127	ENDIF
	2128
[1]	2129	!
[1551]	2130	!-- Collect land surface model timeseries
	2131	IF ( land_surface ) THEN
[2270]	2132	ts_value(dots_soil ,sr) = hom(nzb,1,93,sr) ! ghf
	2133	ts_value(dots_soil+1,sr) = hom(nzb,1,94,sr) ! qsws_liq
	2134	ts_value(dots_soil+2,sr) = hom(nzb,1,95,sr) ! qsws_soil
	2135	ts_value(dots_soil+3,sr) = hom(nzb,1,96,sr) ! qsws_veg
	2136	ts_value(dots_soil+4,sr) = hom(nzb,1,97,sr) ! r_a
	2137	ts_value(dots_soil+5,sr) = hom(nzb,1,98,sr) ! r_s
[1551]	2138	ENDIF
	2139	!
	2140	!-- Collect radiation model timeseries
	2141	IF ( radiation ) THEN
[2270]	2142	ts_value(dots_rad,sr) = hom(nzb,1,99,sr) ! rad_net
	2143	ts_value(dots_rad+1,sr) = hom(nzb,1,100,sr) ! rad_lw_in
	2144	ts_value(dots_rad+2,sr) = hom(nzb,1,101,sr) ! rad_lw_out
	2145	ts_value(dots_rad+3,sr) = hom(nzb,1,102,sr) ! rad_sw_in
	2146	ts_value(dots_rad+4,sr) = hom(nzb,1,103,sr) ! rad_sw_out
[1585]	2147
	2148	IF ( radiation_scheme == 'rrtmg' ) THEN
[2270]	2149	ts_value(dots_rad+5,sr) = hom(nzb,1,108,sr) ! rrtm_aldif
	2150	ts_value(dots_rad+6,sr) = hom(nzb,1,109,sr) ! rrtm_aldir
	2151	ts_value(dots_rad+7,sr) = hom(nzb,1,110,sr) ! rrtm_asdif
	2152	ts_value(dots_rad+8,sr) = hom(nzb,1,111,sr) ! rrtm_asdir
[1585]	2153	ENDIF
	2154
[1551]	2155	ENDIF
	2156
	2157	!
[48]	2158	!-- Calculate additional statistics provided by the user interface
[87]	2159	CALL user_statistics( 'time_series', sr, 0 )
[1]	2160
[48]	2161	ENDDO ! loop of the subregions
	2162
[1]	2163	!
[1918]	2164	!-- If required, sum up horizontal averages for subsequent time averaging.
	2165	!-- Do not sum, if flow statistics is called before the first initial time step.
	2166	IF ( do_sum .AND. simulated_time /= 0.0_wp ) THEN
[1353]	2167	IF ( average_count_pr == 0 ) hom_sum = 0.0_wp
[1]	2168	hom_sum = hom_sum + hom(:,1,:,:)
	2169	average_count_pr = average_count_pr + 1
	2170	do_sum = .FALSE.
	2171	ENDIF
	2172
	2173	!
	2174	!-- Set flag for other UPs (e.g. output routines, but also buoyancy).
	2175	!-- This flag is reset after each time step in time_integration.
	2176	flow_statistics_called = .TRUE.
	2177
	2178	CALL cpu_log( log_point(10), 'flow_statistics', 'stop' )
	2179
	2180
	2181	END SUBROUTINE flow_statistics

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |