source: palm/trunk/SOURCE/dynamics_mod.f90 @ 4172

!> @file dynamics_mod.f90
!--------------------------------------------------------------------------------------------------!
! This file is part of the PALM model system.
!
! PALM is free software: you can redistribute it and/or modify it under the
! terms of the GNU General Public License as published by the Free Software
! Foundation, either version 3 of the License, or (at your option) any later
! version.
!
! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
!
! You should have received a copy of the GNU General Public License along with
! PALM. If not, see <http://www.gnu.org/licenses/>.
!
! Copyright 1997-2019 Leibniz Universitaet Hannover
!--------------------------------------------------------------------------------------------------!
!
! Current revisions:
! -----------------
! 
! 
! Former revisions:
! -----------------
! $Id: dynamics_mod.f90 4097 2019-07-15 11:59:11Z oliver.maas $
! Avoid overlong lines - limit is 132 characters per line
!
! 4047 2019-06-21 18:58:09Z knoop
! Initial introduction of the dynamics module with only dynamics_swap_timelevel implemented
!
!
! Description:
! ------------
!> This module contains the dynamics of PALM.
!--------------------------------------------------------------------------------------------------!
 MODULE dynamics_mod


    USE arrays_3d, &
        ONLY:  pt, pt_1, pt_2, pt_p, &
               q, q_1, q_2, q_p, &
               s, s_1, s_2, s_p, &
               u, u_1, u_2, u_p, &
               v, v_1, v_2, v_p, &
               w, w_1, w_2, w_p

    USE control_parameters, &
        ONLY:  length, &
               restart_string, &
               humidity, &
               neutral, &
               passive_scalar

    USE indices, &
        ONLY:  nbgp, &
               nxl, &
               nxr, &
               nys, &
               nyn, &
               nzb, &
               nzt

    USE kinds

    IMPLICIT NONE

    LOGICAL ::  dynamics_module_enabled = .FALSE.   !<

    SAVE

    PRIVATE

!
!-- Public functions
    PUBLIC &
       dynamics_parin, &
       dynamics_check_parameters, &
       dynamics_check_data_output_ts, &
       dynamics_check_data_output_pr, &
       dynamics_check_data_output, &
       dynamics_init_masks, &
       dynamics_define_netcdf_grid, &
       dynamics_init_arrays, &
       dynamics_init, &
       dynamics_init_checks, &
       dynamics_header, &
       dynamics_actions, &
       dynamics_non_advective_processes, &
       dynamics_exchange_horiz, &
       dynamics_prognostic_equations, &
       dynamics_swap_timelevel, &
       dynamics_3d_data_averaging, &
       dynamics_data_output_2d, &
       dynamics_data_output_3d, &
       dynamics_statistics, &
       dynamics_rrd_global, &
       dynamics_rrd_local, &
       dynamics_wrd_global, &
       dynamics_wrd_local, &
       dynamics_last_actions

!
!-- Public parameters, constants and initial values
    PUBLIC &
       dynamics_module_enabled

    INTERFACE dynamics_parin
       MODULE PROCEDURE dynamics_parin
    END INTERFACE dynamics_parin

    INTERFACE dynamics_check_parameters
       MODULE PROCEDURE dynamics_check_parameters
    END INTERFACE dynamics_check_parameters

    INTERFACE dynamics_check_data_output_ts
       MODULE PROCEDURE dynamics_check_data_output_ts
    END INTERFACE dynamics_check_data_output_ts

    INTERFACE dynamics_check_data_output_pr
       MODULE PROCEDURE dynamics_check_data_output_pr
    END INTERFACE dynamics_check_data_output_pr

    INTERFACE dynamics_check_data_output
       MODULE PROCEDURE dynamics_check_data_output
    END INTERFACE dynamics_check_data_output

    INTERFACE dynamics_init_masks
       MODULE PROCEDURE dynamics_init_masks
    END INTERFACE dynamics_init_masks

    INTERFACE dynamics_define_netcdf_grid
       MODULE PROCEDURE dynamics_define_netcdf_grid
    END INTERFACE dynamics_define_netcdf_grid

    INTERFACE dynamics_init_arrays
       MODULE PROCEDURE dynamics_init_arrays
    END INTERFACE dynamics_init_arrays

    INTERFACE dynamics_init
       MODULE PROCEDURE dynamics_init
    END INTERFACE dynamics_init

    INTERFACE dynamics_init_checks
       MODULE PROCEDURE dynamics_init_checks
    END INTERFACE dynamics_init_checks

    INTERFACE dynamics_header
       MODULE PROCEDURE dynamics_header
    END INTERFACE dynamics_header

    INTERFACE dynamics_actions
       MODULE PROCEDURE dynamics_actions
       MODULE PROCEDURE dynamics_actions_ij
    END INTERFACE dynamics_actions

    INTERFACE dynamics_non_advective_processes
       MODULE PROCEDURE dynamics_non_advective_processes
       MODULE PROCEDURE dynamics_non_advective_processes_ij
    END INTERFACE dynamics_non_advective_processes

    INTERFACE dynamics_exchange_horiz
       MODULE PROCEDURE dynamics_exchange_horiz
    END INTERFACE dynamics_exchange_horiz

    INTERFACE dynamics_prognostic_equations
       MODULE PROCEDURE dynamics_prognostic_equations
       MODULE PROCEDURE dynamics_prognostic_equations_ij
    END INTERFACE dynamics_prognostic_equations

    INTERFACE dynamics_swap_timelevel
       MODULE PROCEDURE dynamics_swap_timelevel
    END INTERFACE dynamics_swap_timelevel

    INTERFACE dynamics_3d_data_averaging
       MODULE PROCEDURE dynamics_3d_data_averaging
    END INTERFACE dynamics_3d_data_averaging

    INTERFACE dynamics_data_output_2d
       MODULE PROCEDURE dynamics_data_output_2d
    END INTERFACE dynamics_data_output_2d

    INTERFACE dynamics_data_output_3d
       MODULE PROCEDURE dynamics_data_output_3d
    END INTERFACE dynamics_data_output_3d

    INTERFACE dynamics_statistics
       MODULE PROCEDURE dynamics_statistics
    END INTERFACE dynamics_statistics

    INTERFACE dynamics_rrd_global
       MODULE PROCEDURE dynamics_rrd_global
    END INTERFACE dynamics_rrd_global

    INTERFACE dynamics_rrd_local
       MODULE PROCEDURE dynamics_rrd_local
    END INTERFACE dynamics_rrd_local

    INTERFACE dynamics_wrd_global
       MODULE PROCEDURE dynamics_wrd_global
    END INTERFACE dynamics_wrd_global

    INTERFACE dynamics_wrd_local
       MODULE PROCEDURE dynamics_wrd_local
    END INTERFACE dynamics_wrd_local

    INTERFACE dynamics_last_actions
       MODULE PROCEDURE dynamics_last_actions
    END INTERFACE dynamics_last_actions


 CONTAINS


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Read module-specific namelist
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_parin


    CHARACTER (LEN=80)  ::  line  !< dummy string that contains the current line of the parameter file

    NAMELIST /dynamics_parameters/  &
       dynamics_module_enabled

    line = ' '
!
!-- Try to find module-specific namelist
    REWIND ( 11 )
    line = ' '
    DO   WHILE ( INDEX( line, '&dynamics_parameters' ) == 0 )
       READ ( 11, '(A)', END=12 )  line
    ENDDO
    BACKSPACE ( 11 )

!-- Set default module switch to true
    dynamics_module_enabled = .TRUE.

!-- Read user-defined namelist
    READ ( 11, dynamics_parameters, ERR = 10 )

    GOTO 12

10  BACKSPACE( 11 )
    READ( 11 , '(A)') line
    CALL parin_fail_message( 'dynamics_parameters', line )

12  CONTINUE

 END SUBROUTINE dynamics_parin


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Check control parameters and deduce further quantities.
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_check_parameters


 END SUBROUTINE dynamics_check_parameters


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Set module-specific timeseries units and labels
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )


    INTEGER(iwp),      INTENT(IN)     ::  dots_max
    INTEGER(iwp),      INTENT(INOUT)  ::  dots_num
    CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT)  :: dots_label
    CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT)  :: dots_unit

!
!-- Next line is to avoid compiler warning about unused variables. Please remove.
    IF ( dots_num == 0  .OR.  dots_label(1)(1:1) == ' '  .OR.  dots_unit(1)(1:1) == ' ' )  CONTINUE


 END SUBROUTINE dynamics_check_data_output_ts


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Set the unit of module-specific profile output quantities. For those variables not recognized,
!> the parameter unit is set to "illegal", which tells the calling routine that the output variable
!> is not defined and leads to a program abort.
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )


    CHARACTER (LEN=*) ::  unit     !<
    CHARACTER (LEN=*) ::  variable !<
    CHARACTER (LEN=*) ::  dopr_unit !< local value of dopr_unit

    INTEGER(iwp) ::  var_count     !<

!
!-- Next line is to avoid compiler warning about unused variables. Please remove.
    IF ( unit(1:1) == ' '  .OR.  dopr_unit(1:1) == ' '  .OR.  var_count == 0 )  CONTINUE

    SELECT CASE ( TRIM( variable ) )

!       CASE ( 'var_name' )

       CASE DEFAULT
          unit = 'illegal'

    END SELECT


 END SUBROUTINE dynamics_check_data_output_pr


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Set the unit of module-specific output quantities. For those variables not recognized,
!> the parameter unit is set to "illegal", which tells the calling routine that the output variable
!< is not defined and leads to a program abort.
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_check_data_output( variable, unit )


    CHARACTER (LEN=*) ::  unit     !<
    CHARACTER (LEN=*) ::  variable !<

    SELECT CASE ( TRIM( variable ) )

!       CASE ( 'u2' )

       CASE DEFAULT
          unit = 'illegal'

    END SELECT


 END SUBROUTINE dynamics_check_data_output


!------------------------------------------------------------------------------!
!
! Description:
! ------------
!> Initialize module-specific masked output
!------------------------------------------------------------------------------!
 SUBROUTINE dynamics_init_masks( variable, unit )


    CHARACTER (LEN=*) ::  unit     !<
    CHARACTER (LEN=*) ::  variable !<


    SELECT CASE ( TRIM( variable ) )

!       CASE ( 'u2' )

       CASE DEFAULT
          unit = 'illegal'

    END SELECT


 END SUBROUTINE dynamics_init_masks


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Initialize module-specific arrays
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_init_arrays


 END SUBROUTINE dynamics_init_arrays


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Execution of module-specific initializing actions
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_init


 END SUBROUTINE dynamics_init


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Perform module-specific post-initialization checks
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_init_checks


 END SUBROUTINE dynamics_init_checks


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Set the grids on which module-specific output quantities are defined. Allowed values for
!> grid_x are "x" and "xu", for grid_y "y" and "yv", and for grid_z "zu" and "zw".
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_define_netcdf_grid( variable, found, grid_x, grid_y, grid_z )


    CHARACTER (LEN=*) ::  grid_x     !<
    CHARACTER (LEN=*) ::  grid_y     !<
    CHARACTER (LEN=*) ::  grid_z     !<
    CHARACTER (LEN=*) ::  variable   !<

    LOGICAL ::  found   !<


    SELECT CASE ( TRIM( variable ) )

!       CASE ( 'u2' )

       CASE DEFAULT
          found  = .FALSE.
          grid_x = 'none'
          grid_y = 'none'
          grid_z = 'none'

    END SELECT


 END SUBROUTINE dynamics_define_netcdf_grid


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Print a header with module-specific information.
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_header( io )


    INTEGER(iwp) ::  io   !<

!
!-- If no module-specific variables are read from the namelist-file, no information will be printed.
    IF ( .NOT. dynamics_module_enabled )  THEN
       WRITE ( io, 100 )
       RETURN
    ENDIF

!
!-- Printing the information.
    WRITE ( io, 110 )

!
!-- Format-descriptors
100 FORMAT (//' *** dynamic module disabled'/)
110 FORMAT (//1X,78('#')                                                       &
            //' User-defined variables and actions:'/                          &
              ' -----------------------------------'//)

 END SUBROUTINE dynamics_header


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Execute module-specific actions for all grid points
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_actions( location )


    CHARACTER (LEN=*) ::  location !<

!    INTEGER(iwp) ::  i !<
!    INTEGER(iwp) ::  j !<
!    INTEGER(iwp) ::  k !<

!
!-- Here the user-defined actions follow
!-- No calls for single grid points are allowed at locations before and
!-- after the timestep, since these calls are not within an i,j-loop
    SELECT CASE ( location )

       CASE ( 'before_timestep' )


       CASE ( 'before_prognostic_equations' )


       CASE ( 'after_integration' )


       CASE ( 'after_timestep' )


       CASE ( 'u-tendency' )


       CASE ( 'v-tendency' )


       CASE ( 'w-tendency' )


       CASE ( 'pt-tendency' )


       CASE ( 'sa-tendency' )


       CASE ( 'e-tendency' )


       CASE ( 'q-tendency' )


       CASE ( 's-tendency' )


       CASE DEFAULT
          CONTINUE

    END SELECT

 END SUBROUTINE dynamics_actions


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Execute module-specific actions for grid point i,j
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_actions_ij( i, j, location )


    CHARACTER (LEN=*) ::  location

    INTEGER(iwp) ::  i
    INTEGER(iwp) ::  j

!
!-- Here the user-defined actions follow
    SELECT CASE ( location )

       CASE ( 'u-tendency' )

!--       Next line is to avoid compiler warning about unused variables. Please remove.
          IF ( i +  j < 0 )  CONTINUE

       CASE ( 'v-tendency' )


       CASE ( 'w-tendency' )


       CASE ( 'pt-tendency' )


       CASE ( 'sa-tendency' )


       CASE ( 'e-tendency' )


       CASE ( 'q-tendency' )


       CASE ( 's-tendency' )


       CASE DEFAULT
          CONTINUE

    END SELECT

 END SUBROUTINE dynamics_actions_ij


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Compute module-specific non-advective processes for all grid points
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_non_advective_processes



 END SUBROUTINE dynamics_non_advective_processes


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Compute module-specific non-advective processes for grid points i,j
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_non_advective_processes_ij( i, j )


    INTEGER(iwp) ::  i                 !<
    INTEGER(iwp) ::  j                 !<

!
!--    Next line is just to avoid compiler warnings about unused variables. You may remove it.
       IF ( i + j < 0 )  CONTINUE


 END SUBROUTINE dynamics_non_advective_processes_ij


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Perform module-specific horizontal boundary exchange
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_exchange_horiz



 END SUBROUTINE dynamics_exchange_horiz


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Compute module-specific prognostic equations for all grid points
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_prognostic_equations



 END SUBROUTINE dynamics_prognostic_equations


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Compute module-specific prognostic equations for grid point i,j
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_prognostic_equations_ij( i, j, i_omp_start, tn )


    INTEGER(iwp), INTENT(IN) ::  i            !< grid index in x-direction
    INTEGER(iwp), INTENT(IN) ::  j            !< grid index in y-direction
    INTEGER(iwp), INTENT(IN) ::  i_omp_start  !< first loop index of i-loop in prognostic_equations
    INTEGER(iwp), INTENT(IN) ::  tn           !< task number of openmp task

!
!-- Next line is just to avoid compiler warnings about unused variables. You may remove it.
    IF ( i + j + i_omp_start + tn < 0 )  CONTINUE

 END SUBROUTINE dynamics_prognostic_equations_ij


!------------------------------------------------------------------------------!
! Description:
! ------------
!> Swap timelevels of module-specific array pointers
!------------------------------------------------------------------------------!
 SUBROUTINE dynamics_swap_timelevel ( mod_count )


    INTEGER, INTENT(IN) :: mod_count


    SELECT CASE ( mod_count )

       CASE ( 0 )

          u  => u_1;   u_p  => u_2
          v  => v_1;   v_p  => v_2
          w  => w_1;   w_p  => w_2
          IF ( .NOT. neutral )  THEN
             pt => pt_1;  pt_p => pt_2
          ENDIF
          IF ( humidity )  THEN
             q => q_1;    q_p => q_2
          ENDIF
          IF ( passive_scalar )  THEN
             s => s_1;    s_p => s_2
          ENDIF

       CASE ( 1 )

          u  => u_2;   u_p  => u_1
          v  => v_2;   v_p  => v_1
          w  => w_2;   w_p  => w_1
          IF ( .NOT. neutral )  THEN
             pt => pt_2;  pt_p => pt_1
          ENDIF
          IF ( humidity )  THEN
             q => q_2;    q_p => q_1
          ENDIF
          IF ( passive_scalar )  THEN
             s => s_2;    s_p => s_1
          ENDIF

    END SELECT

 END SUBROUTINE dynamics_swap_timelevel


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Sum up and time-average module-specific output quantities
!> as well as allocate the array necessary for storing the average.
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_3d_data_averaging( mode, variable )


    CHARACTER (LEN=*) ::  mode    !<
    CHARACTER (LEN=*) :: variable !<


    IF ( mode == 'allocate' )  THEN

       SELECT CASE ( TRIM( variable ) )

!          CASE ( 'u2' )

          CASE DEFAULT
             CONTINUE

       END SELECT

    ELSEIF ( mode == 'sum' )  THEN

       SELECT CASE ( TRIM( variable ) )

!          CASE ( 'u2' )

          CASE DEFAULT
             CONTINUE

       END SELECT

    ELSEIF ( mode == 'average' )  THEN

       SELECT CASE ( TRIM( variable ) )

!          CASE ( 'u2' )

       END SELECT

    ENDIF


 END SUBROUTINE dynamics_3d_data_averaging


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Resorts the module-specific output quantity with indices (k,j,i) to a
!> temporary array with indices (i,j,k) and sets the grid on which it is defined.
!> Allowed values for grid are "zu" and "zw".
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_data_output_2d( av, variable, found, grid, mode, local_pf, &
                                     two_d, nzb_do, nzt_do, fill_value )


    CHARACTER (LEN=*) ::  grid     !<
    CHARACTER (LEN=*), INTENT(IN) ::  mode       !< either 'xy', 'xz' or 'yz'
    CHARACTER (LEN=*) ::  variable !<

    INTEGER(iwp) ::  av     !< flag to control data output of instantaneous or time-averaged data
!    INTEGER(iwp) ::  i      !< grid index along x-direction
!    INTEGER(iwp) ::  j      !< grid index along y-direction
!    INTEGER(iwp) ::  k      !< grid index along z-direction
!    INTEGER(iwp) ::  m      !< running index surface elements
    INTEGER(iwp) ::  nzb_do !< lower limit of the domain (usually nzb)
    INTEGER(iwp) ::  nzt_do !< upper limit of the domain (usually nzt+1)

    LOGICAL      ::  found !<
    LOGICAL      ::  two_d !< flag parameter that indicates 2D variables (horizontal cross sections)

    REAL(wp), INTENT(IN) ::  fill_value

    REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) ::  local_pf !<

!
!-- Next line is just to avoid compiler warnings about unused variables. You may remove it.
    IF ( two_d .AND. av + LEN( mode ) + local_pf(nxl,nys,nzb_do) + fill_value < 0.0 )  CONTINUE

    found = .TRUE.

    SELECT CASE ( TRIM( variable ) )

!       CASE ( 'u2_xy', 'u2_xz', 'u2_yz' )

       CASE DEFAULT
          found = .FALSE.
          grid  = 'none'

    END SELECT


 END SUBROUTINE dynamics_data_output_2d


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Resorts the module-specific output quantity with indices (k,j,i)
!> to a temporary array with indices (i,j,k).
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )


    CHARACTER (LEN=*) ::  variable !<

    INTEGER(iwp) ::  av    !<
!    INTEGER(iwp) ::  i     !<
!    INTEGER(iwp) ::  j     !<
!    INTEGER(iwp) ::  k     !<
    INTEGER(iwp) ::  nzb_do !< lower limit of the data output (usually 0)
    INTEGER(iwp) ::  nzt_do !< vertical upper limit of the data output (usually nz_do3d)

    LOGICAL      ::  found !<

    REAL(wp), INTENT(IN) ::  fill_value    !< value for the _FillValue attribute

    REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) ::  local_pf !<

!
!-- Next line is to avoid compiler warning about unused variables. Please remove.
    IF ( av + local_pf(nxl,nys,nzb_do) + fill_value < 0.0 )  CONTINUE


    found = .TRUE.

    SELECT CASE ( TRIM( variable ) )

!       CASE ( 'u2' )

       CASE DEFAULT
          found = .FALSE.

    END SELECT


 END SUBROUTINE dynamics_data_output_3d


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Calculation of module-specific statistics, i.e. horizontally averaged profiles and time series.
!> This is called for every statistic region sr, but at least for the region "total domain" (sr=0).
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_statistics( mode, sr, tn )


    CHARACTER (LEN=*) ::  mode   !<
!    INTEGER(iwp) ::  i    !<
!    INTEGER(iwp) ::  j    !<
!    INTEGER(iwp) ::  k    !<
    INTEGER(iwp) ::  sr   !<
    INTEGER(iwp) ::  tn   !<

!
!-- Next line is to avoid compiler warning about unused variables. Please remove.
    IF ( sr == 0  .OR.  tn == 0 )  CONTINUE

    IF ( mode == 'profiles' )  THEN

    ELSEIF ( mode == 'time_series' )  THEN

    ENDIF

 END SUBROUTINE dynamics_statistics


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Read module-specific global restart data.
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_rrd_global( found )


    LOGICAL, INTENT(OUT)  ::  found


    found = .TRUE.


    SELECT CASE ( restart_string(1:length) )

       CASE ( 'global_paramter' )
!          READ ( 13 )  global_parameter

       CASE DEFAULT

          found = .FALSE.

    END SELECT


 END SUBROUTINE dynamics_rrd_global


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Read module-specific processor specific restart data from file(s).
!> Subdomain index limits on file are given by nxl_on_file, etc.
!> Indices nxlc, etc. indicate the range of gridpoints to be mapped from the subdomain on file (f)
!> to the subdomain of the current PE (c). They have been calculated in routine rrd_local.
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_rrd_local( k, nxlf, nxlc, nxl_on_file, nxrf, nxrc, nxr_on_file, nynf, nync,   &
                                nyn_on_file, nysf, nysc, nys_on_file, tmp_2d, tmp_3d, found )


    INTEGER(iwp) ::  k               !<
    INTEGER(iwp) ::  nxlc            !<
    INTEGER(iwp) ::  nxlf            !<
    INTEGER(iwp) ::  nxl_on_file     !<
    INTEGER(iwp) ::  nxrc            !<
    INTEGER(iwp) ::  nxrf            !<
    INTEGER(iwp) ::  nxr_on_file     !<
    INTEGER(iwp) ::  nync            !<
    INTEGER(iwp) ::  nynf            !<
    INTEGER(iwp) ::  nyn_on_file     !<
    INTEGER(iwp) ::  nysc            !<
    INTEGER(iwp) ::  nysf            !<
    INTEGER(iwp) ::  nys_on_file     !<

    LOGICAL, INTENT(OUT)  ::  found

    REAL(wp), DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp) :: tmp_2d   !<
    REAL(wp), DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp) :: tmp_3d   !<

!
!-- Next line is to avoid compiler warning about unused variables. Please remove.
    IF ( k + nxlc + nxlf + nxrc + nxrf + nync + nynf + nysc + nysf +           &
         tmp_2d(nys_on_file,nxl_on_file) +                                     &
         tmp_3d(nzb,nys_on_file,nxl_on_file) < 0.0 )  CONTINUE
!
!-- Here the reading of user-defined restart data follows:
!-- Sample for user-defined output

    found = .TRUE.

    SELECT CASE ( restart_string(1:length) )

!       CASE ( 'u2_av' )

       CASE DEFAULT

          found = .FALSE.

    END SELECT

 END SUBROUTINE dynamics_rrd_local


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Writes global module-specific restart data into binary file(s) for restart runs.
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_wrd_global


 END SUBROUTINE dynamics_wrd_global


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Writes processor specific and module-specific restart data into binary file(s) for restart runs.
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_wrd_local


 END SUBROUTINE dynamics_wrd_local


!--------------------------------------------------------------------------------------------------!
! Description:
! ------------
!> Execute module-specific actions at the very end of the program.
!--------------------------------------------------------------------------------------------------!
 SUBROUTINE dynamics_last_actions


 END SUBROUTINE dynamics_last_actions

 END MODULE dynamics_mod