source: palm/trunk/SOURCE/data_output_tseries.f90 @ 1

 SUBROUTINE data_output_tseries

!------------------------------------------------------------------------------!
! Actual revisions:
! -----------------
! 
!
! Former revisions:
! -----------------
! $Log: data_output_tseries.f90,v $
! Revision 1.13  2006/03/14 12:42:51  raasch
! Error removed: NetCDF output only if switched on
!
! Revision 1.12  2006/02/23 10:30:54  raasch
! Former routine plot_ts renamed data_output_tseries
! error number argument for handle_netcdf_error
! plts_anz renamed dots_n
!
! Revision 1.11  2005/05/18 15:50:54  raasch
! Extensions for NetCDF output
!
! Revision 1.10  2003/04/16 13:10:40  raasch
! Output of Monin Obukhov length included
!
! Revision 1.9  2001/03/30 07:45:34  raasch
! Translation of remaining German identifiers (variables, subroutines, etc.)
!
! Revision 1.8  2001/01/22 20:36:59  letzel
! All comments translated into English.
!
! Revision 1.7  2001/01/22 07:42:50  raasch
! Module test_variables removed
!
! Revision 1.6  1999/02/05 09:14:35  raasch
! Erweiterung fuer Ausgabe von Upstream-Anteilen, Erweiterung von ts_value
! auf 30 Elemente
!
! Revision 1.5  1998/07/06 12:26:59  raasch
! + USE test_variables
!
! Revision 1.4  1998/04/15 11:22:22  raasch
! Erweiterung der Zeitreihenausgabe auf oberflaechennahe Temperaturen und
! Waermestroeme
!
! Revision 1.3  1998/03/30 11:48:03  raasch
! Divergenzen stehen jetzt in hom
!
! Revision 1.2  1998/03/25 13:56:01  raasch
! Erweiterungen fuer Gebietsstatistiken,
! dt in dt_3d umbenannt
!
! Revision 1.1  1998/03/03 08:00:13  raasch
! Initial revision
!
!
! Description:
! ------------
! Time series output for PROFIL. Always all time series are stored. A selection
! can be applied via the PROFIL-parameters in close_file.
!------------------------------------------------------------------------------!

    USE control_parameters
    USE cpulog
    USE indices
    USE interfaces
    USE netcdf_control
    USE pegrid
    USE profil_parameter
    USE statistics

    IMPLICIT NONE


    INTEGER ::  file_id, i, j, sr
    REAL    ::  ts_value(30)


!
!-- If required, compute statistics.
    IF ( .NOT. flow_statistics_called )  CALL flow_statistics

!
!-- Flow_statistics has its own cpu-time measuring.
    CALL cpu_log( log_point(21), 'data_output_tseries', 'start' )

    IF ( myid == 0 )  THEN

!
!--    Open file for time series output in NetCDF format
       IF ( netcdf_output )  THEN
          dots_time_count = dots_time_count + 1
          CALL check_open( 105 )
#if defined( __netcdf )
!
!--       Update the time series time axis
          nc_stat = NF90_PUT_VAR( id_set_ts, id_var_time_ts,     &
                                  (/ simulated_time /),          &
                                  start = (/ dots_time_count /), &
                                  count = (/ 1 /) )
          IF (nc_stat /= NF90_NOERR)  CALL handle_netcdf_error( 350 )
#endif
       ENDIF

!
!--    Time series output for the total domain (and each subregion, if
!--    applicable)
       DO  sr = 0, statistic_regions
!
!--       Open file for time series output.
          IF ( profil_output )  THEN
             file_id = 50 + sr
             CALL check_open( file_id )
          ENDIF

!
!--       Collect and printout all time series quantities in a single line.
          ts_value(1) = hom(nzb+4,1,var_hom,sr)     ! E
          ts_value(2) = hom(nzb+5,1,var_hom,sr)     ! E*
          ts_value(3) = dt_3d
          ts_value(4) = hom(nzb,1,var_hom,sr)       ! u*
          ts_value(5) = hom(nzb+3,1,var_hom,sr)     ! th*
          ts_value(6) = u_max
          ts_value(7) = v_max
          ts_value(8) = w_max
          ts_value(9) = hom(nzb+10,1,var_sum,sr)    ! new divergence
          ts_value(10) = hom(nzb+9,1,var_hom,sr)    ! old Divergence
          ts_value(11) = hom(nzb+6,1,var_hom,sr)    ! z_i(1)
          ts_value(12) = hom(nzb+7,1,var_hom,sr)    ! z_i(2)
          ts_value(13) = hom(nzb+8,1,var_hom,sr)    ! w*
          ts_value(14) = hom(nzb,1,16,sr)           ! w'pt'   at k=0
          ts_value(15) = hom(nzb+1,1,16,sr)         ! w'pt'   at k=1
          ts_value(16) = hom(nzb+1,1,18,sr)         ! wpt     at k=1
          ts_value(17) = hom(nzb,1,4,sr)            ! pt(0)
          ts_value(18) = hom(nzb+1,1,4,sr)          ! pt(zp)
          ts_value(19) = hom(nzb+9,1,var_hom-1,sr)  ! splptx
          ts_value(20) = hom(nzb+10,1,var_hom-1,sr) ! splpty
          ts_value(21) = hom(nzb+11,1,var_hom-1,sr) ! splptz
          IF ( ts_value(5) /= 0.0 )  THEN
             ts_value(22) = ts_value(4)**2 / &
                            ( kappa * g * ts_value(5) / ts_value(18) )  ! L
          ELSE
             ts_value(22) = 10000.0
          ENDIF

#if defined( __netcdf )
          IF ( netcdf_output )  THEN
             DO  i = 1, dots_num
                nc_stat = NF90_PUT_VAR( id_set_ts, id_var_dots(i,sr),  &
                                        (/ ts_value(i) /),             &
                                        start = (/ dots_time_count /), &
                                        count = (/ 1 /) )
                IF ( nc_stat /= NF90_NOERR )  CALL handle_netcdf_error( 351 )
             ENDDO
          ENDIF
#endif

          IF ( profil_output )  THEN
             WRITE ( file_id, 500 )  simulated_time, ts_value(1:22)
!
!--          y-value range of the crosses to be drawn by PROFIL
!--          If required, enlarge them, provided they have not yet been
!--          specified in
!--          check_parameters
             DO  i = 1, dots_n

                j = dots_crossindex(i)

                IF ( cross_ts_uymin(j) == 999.999 )  THEN
!
!--                When the value range of the first line in the corresponding
!--                cross is determined, its value range is simply adopted.
                   IF ( cross_ts_uymin_computed(j) == 999.999 ) &
                   THEN
                      cross_ts_uymin_computed(j) = ts_value(dots_index(i))
                   ELSE
                      cross_ts_uymin_computed(j) = &
                         MIN(cross_ts_uymin_computed(j),ts_value(dots_index(i)))
                   ENDIF
                ENDIF

                IF ( cross_ts_uymax(j) == 999.999 )  THEN
!
!--                When the value range of the first line in the corresponding
!--                cross is determined, its value range is simply adopted.
                   IF ( cross_ts_uymax_computed(j) == 999.999 ) &
                   THEN
                      cross_ts_uymax_computed(j) = ts_value(dots_index(i))
                   ELSE
                      cross_ts_uymax_computed(j) = &
                         MAX(cross_ts_uymax_computed(j),ts_value(dots_index(i)))
                   ENDIF
                ENDIF

             ENDDO

          ENDIF

       ENDDO   ! Loop of subregions.

    ENDIF


    CALL cpu_log( log_point(21), 'data_output_tseries','stop', 'nobarrier' )

!
!-- formats
500 FORMAT (23(E15.7,1X))

 END SUBROUTINE data_output_tseries