Home

Context Navigation

data_output_ptseries.f90 @ 103

Last change on this file since 103 was 77, checked in by raasch, 18 years ago

New:
---

particle reflection from vertical walls implemented, particle SGS model adjusted to walls

Wall functions for vertical walls now include diabatic conditions. New subroutines wall_fluxes, wall_fluxes_e. New 4D-array rif_wall.

new d3par-parameter netcdf_64bit_3d to switch on 64bit offset only for 3D files

new d3par-parameter dt_max to define the maximum value for the allowed timestep

new inipar-parameter loop_optimization to control the loop optimization method

new inipar-parameter pt_refrence. If given, this value is used as the reference that in buoyancy terms (otherwise, the instantaneous horizontally averaged temperature is used).

new user interface user_advec_particles

new initializing action "by_user" calls user_init_3d_model and allows the initial setting of all 3d arrays

topography height informations are stored on arrays zu_s_inner and zw_w_inner and output to the 2d/3d NetCDF files

samples added to the user interface which show how to add user-define time series quantities.

calculation/output of precipitation amount, precipitation rate and z0 (by setting "pra*", "prr*", "z0*" with data_output). The time interval on which the precipitation amount is defined is set by new d3par-parameter precipitation_amount_interval

unit 9 opened for debug output (file DEBUG_<pe#>)

Makefile, advec_particles, average_3d_data, buoyancy, calc_precipitation, check_open, check_parameters, data_output_2d, diffusion_e, diffusion_u, diffusion_v, diffusion_w, diffusivities, header, impact_of_latent_heat, init_particles, init_3d_model, modules, netcdf, parin, production_e, read_var_list, read_3d_binary, sum_up_3d_data, user_interface, write_var_list, write_3d_binary

New: wall_fluxes

Changed:

General revision of non-cyclic horizontal boundary conditions: radiation boundary conditions are now used instead of Neumann conditions at the outflow (calculation needs velocity values for t-dt, which are stored on new arrays u_m_l, u_m_r, etc.), calculation of mean outflow is not needed any more, volume flow control is added for the outflow boundary (currently only for the north boundary!!), additional gridpoints along x and y (uxrp, vynp) are not needed any more, routine "boundary_conds" now operates on timelevel t+dt and is not split in two parts (main, uvw_outflow) any more, Neumann boundary conditions at inflow/outflow in case of non-cyclic boundary conditions for all 2d-arrays that are handled by exchange_horiz_2d

The FFT-method for solving the Poisson-equation is now working with Neumann boundary conditions both at the bottom and the top. This requires adjustments of the tridiagonal coefficients and subtracting the horizontally averaged mean from the vertical velocity field.

+age_m in particle_type

Particles-package is now part of the default code ("-p particles" is not needed any more).

Move call of user_actions( 'after_integration' ) below increment of times
and counters. user_actions is now called for each statistic region and has as an argument the number of the respective region (sr)

d3par-parameter data_output_ts removed. Timeseries output for "profil" removed. Timeseries are now switched on by dt_dots. Timeseries data is collected in flow_statistics.

Initial velocities at nzb+1 are regarded for volume flow control in case they have been set zero before (to avoid small timesteps); see new internal parameters u/v_nzb_p1_for_vfc.

q is not allowed to become negative (prognostic_equations).

poisfft_init is only called if fft-solver is switched on (init_pegrid).

d3par-parameter moisture renamed to humidity.

Subversion global revision number is read from mrun and added to the run description header and to the run control (_rc) file.

vtk directives removed from main program.

The uitility routine interpret_config reads PALM environment variables from NAMELIST instead using the system call GETENV.

advec_u_pw, advec_u_up, advec_v_pw, advec_v_up, asselin_filter, check_parameters, coriolis, data_output_dvrp, data_output_ptseries, data_output_ts, data_output_2d, data_output_3d, diffusion_u, diffusion_v, exchange_horiz, exchange_horiz_2d, flow_statistics, header, init_grid, init_particles, init_pegrid, init_rankine, init_pt_anomaly, init_1d_model, init_3d_model, modules, palm, package_parin, parin, poisfft, poismg, prandtl_fluxes, pres, production_e, prognostic_equations, read_var_list, read_3d_binary, sor, swap_timelevel, time_integration, write_var_list, write_3d_binary

Errors:

Bugfix: preset of tendencies te_em, te_um, te_vm in init_1d_model

Bugfix in sample for reading user defined data from restart file (user_init)

Bugfix in setting diffusivities for cases with the outflow damping layer extending over more than one subdomain (init_3d_model)

Check for possible negative humidities in the initial humidity profile.

in Makefile, default suffixes removed from the suffix list to avoid calling of m2c in
# case of .mod files

Makefile
check_parameters, init_1d_model, init_3d_model, user_interface

Property svn:keywords set to Id

File size: 10.8 KB

Rev	Line
[1]	1	SUBROUTINE data_output_ptseries
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[77]	6	!
[1]	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: data_output_ptseries.f90 77 2007-03-29 04:26:56Z raasch $
[77]	11	!
	12	! 60 2007-03-11 11:50:04Z raasch
	13	! Particles-package is now part of the default code.
	14	!
[3]	15	! RCS Log replace by Id keyword, revision history cleaned up
	16	!
[1]	17	! Revision 1.2 2006/08/22 13:51:13 raasch
	18	! Seperate output for particle groups
	19	!
	20	! Revision 1.1 2006/08/04 14:24:18 raasch
	21	! Initial revision
	22	!
	23	!
	24	! Description:
	25	! ------------
	26	! Output of particle data timeseries in NetCDF format.
	27	!------------------------------------------------------------------------------!
	28
	29	USE control_parameters
	30	USE cpulog
	31	USE indices
	32	USE interfaces
	33	USE netcdf_control
	34	USE particle_attributes
	35	USE pegrid
	36
	37	IMPLICIT NONE
	38
	39
	40	INTEGER :: i, inum, j, n
	41
	42	REAL, DIMENSION(0:number_of_particle_groups,30) :: pts_value, pts_value_l
	43
	44
	45
	46	CALL cpu_log( log_point(36), 'data_output_ptseries', 'start' )
	47
	48	IF ( myid == 0 .AND. netcdf_output ) THEN
	49	!
	50	!-- Open file for time series output in NetCDF format
	51	dopts_time_count = dopts_time_count + 1
	52	CALL check_open( 109 )
	53	#if defined( __netcdf )
	54	!
	55	!-- Update the particle time series time axis
	56	nc_stat = NF90_PUT_VAR( id_set_pts, id_var_time_pts, &
	57	(/ simulated_time /), &
	58	start = (/ dopts_time_count /), count = (/ 1 /) )
	59	IF (nc_stat /= NF90_NOERR) CALL handle_netcdf_error( 391 )
	60	#endif
	61
	62	ENDIF
	63
	64	pts_value_l = 0.0
	65
	66	!
	67	!-- Calculate or collect the particle time series quantities for all particles
	68	!-- and seperately for each particle group (if there is more than one group)
	69	DO n = 1, number_of_particles
	70
	71	pts_value_l(0,1) = number_of_particles ! total # of particles
	72	pts_value_l(0,2) = pts_value_l(0,2) + &
	73	( particles(n)%x - particles(n)%origin_x ) ! mean x
	74	pts_value_l(0,3) = pts_value_l(0,3) + &
	75	( particles(n)%y - particles(n)%origin_y ) ! mean y
	76	pts_value_l(0,4) = pts_value_l(0,4) + &
	77	( particles(n)%z - particles(n)%origin_z ) ! mean z
	78	pts_value_l(0,5) = pts_value_l(0,5) + particles(n)%z ! mean z (absolute)
	79	pts_value_l(0,6) = pts_value_l(0,6) + particles(n)%speed_x ! mean u
	80	pts_value_l(0,7) = pts_value_l(0,7) + particles(n)%speed_y ! mean v
	81	pts_value_l(0,8) = pts_value_l(0,8) + particles(n)%speed_z ! mean w
	82	pts_value_l(0,9) = pts_value_l(0,9) + &
	83	particles(n)%speed_x_sgs ! mean sgsu
	84	pts_value_l(0,10) = pts_value_l(0,10) + &
	85	particles(n)%speed_y_sgs ! mean sgsv
	86	pts_value_l(0,11) = pts_value_l(0,11) + &
	87	particles(n)%speed_z_sgs ! mean sgsw
	88	IF ( particles(n)%speed_z > 0.0 ) THEN
	89	pts_value_l(0,12) = pts_value_l(0,12) + 1.0 ! # of upward moving prts
	90	pts_value_l(0,13) = pts_value_l(0,13) + &
	91	particles(n)%speed_z ! mean w upw.
	92	ELSE
	93	pts_value_l(0,14) = pts_value_l(0,14) + &
	94	particles(n)%speed_z ! mean w down
	95	ENDIF
	96	pts_value_l(0,15) = number_of_particles
	97	pts_value_l(0,16) = number_of_particles
	98
	99	!
	100	!-- Repeat the same for the respective particle group
	101	IF ( number_of_particle_groups > 1 ) THEN
	102	j = particles(n)%group
	103
	104	pts_value_l(j,1) = pts_value_l(j,1) + 1
	105	pts_value_l(j,2) = pts_value_l(j,2) + &
	106	( particles(n)%x - particles(n)%origin_x )
	107	pts_value_l(j,3) = pts_value_l(j,3) + &
	108	( particles(n)%y - particles(n)%origin_y )
	109	pts_value_l(j,4) = pts_value_l(j,4) + &
	110	( particles(n)%z - particles(n)%origin_z )
	111	pts_value_l(j,5) = pts_value_l(j,5) + particles(n)%z
	112	pts_value_l(j,6) = pts_value_l(j,6) + particles(n)%speed_x
	113	pts_value_l(j,7) = pts_value_l(j,7) + particles(n)%speed_y
	114	pts_value_l(j,8) = pts_value_l(j,8) + particles(n)%speed_z
	115	pts_value_l(j,9) = pts_value_l(j,9) + particles(n)%speed_x_sgs
	116	pts_value_l(j,10) = pts_value_l(j,10) + particles(n)%speed_y_sgs
	117	pts_value_l(j,11) = pts_value_l(j,11) + particles(n)%speed_z_sgs
	118	IF ( particles(n)%speed_z > 0.0 ) THEN
	119	pts_value_l(j,12) = pts_value_l(j,12) + 1.0
	120	pts_value_l(j,13) = pts_value_l(j,13) + particles(n)%speed_z
	121	ELSE
	122	pts_value_l(j,14) = pts_value_l(j,14) + particles(n)%speed_z
	123	ENDIF
	124	pts_value_l(j,15) = pts_value_l(j,15) + 1.0
	125	pts_value_l(j,16) = pts_value_l(j,16) + 1.0
	126
	127	ENDIF
	128
	129	ENDDO
	130
	131	#if defined( __parallel )
	132	!
	133	!-- Sum values of the subdomains
	134	inum = number_of_particle_groups + 1
	135
	136	CALL MPI_ALLREDUCE( pts_value_l(0,1), pts_value(0,1), 14*inum, MPI_REAL, &
	137	MPI_SUM, comm2d, ierr )
	138	CALL MPI_ALLREDUCE( pts_value_l(0,15), pts_value(0,15), inum, MPI_REAL, &
	139	MPI_MAX, comm2d, ierr )
	140	CALL MPI_ALLREDUCE( pts_value_l(0,16), pts_value(0,16), inum, MPI_REAL, &
	141	MPI_MIN, comm2d, ierr )
	142	#else
	143	pts_value(:,1:16) = pts_value_l(:,1:16)
	144	#endif
	145
	146	!
	147	!-- Normalize the above calculated quantities with the total number of
	148	!-- particles
	149	IF ( number_of_particle_groups > 1 ) THEN
	150	inum = number_of_particle_groups
	151	ELSE
	152	inum = 0
	153	ENDIF
	154
	155	DO j = 0, inum
	156
	157	IF ( pts_value(j,1) > 0.0 ) THEN
	158
	159	pts_value(j,2:14) = pts_value(j,2:14) / pts_value(j,1)
	160	IF ( pts_value(j,12) > 0.0 .AND. pts_value(j,12) < 1.0 ) THEN
	161	pts_value(j,13) = pts_value(j,13) / pts_value(j,12)
	162	pts_value(j,14) = pts_value(j,14) / ( 1.0 - pts_value(j,12) )
	163	ELSEIF ( pts_value(j,12) == 0.0 ) THEN
	164	pts_value(j,13) = -1.0
	165	ELSE
	166	pts_value(j,14) = -1.0
	167	ENDIF
	168
	169	ENDIF
	170
	171	ENDDO
	172
	173	!
	174	!-- Calculate higher order moments of particle time series quantities,
	175	!-- seperately for each particle group (if there is more than one group)
	176	DO n = 1, number_of_particles
	177
	178	pts_value_l(0,17) = pts_value_l(0,17) + ( particles(n)%x - &
	179	particles(n)%origin_x - pts_value(0,2) )*2 ! x2
	180	pts_value_l(0,18) = pts_value_l(0,18) + ( particles(n)%y - &
	181	particles(n)%origin_y - pts_value(0,3) )*2 ! y2
	182	pts_value_l(0,19) = pts_value_l(0,19) + ( particles(n)%z - &
	183	particles(n)%origin_z - pts_value(0,4) )*2 ! z2
	184	pts_value_l(0,20) = pts_value_l(0,20) + ( particles(n)%speed_x - &
	185	pts_value(0,6) )*2 ! u2
	186	pts_value_l(0,21) = pts_value_l(0,21) + ( particles(n)%speed_y - &
	187	pts_value(0,7) )*2 ! v2
	188	pts_value_l(0,22) = pts_value_l(0,22) + ( particles(n)%speed_z - &
	189	pts_value(0,8) )*2 ! w2
	190	pts_value_l(0,23) = pts_value_l(0,23) + ( particles(n)%speed_x_sgs - &
	191	pts_value(0,9) )**2 ! u"2
	192	pts_value_l(0,24) = pts_value_l(0,24) + ( particles(n)%speed_y_sgs - &
	193	pts_value(0,10) )**2 ! v"2
	194	pts_value_l(0,25) = pts_value_l(0,25) + ( particles(n)%speed_z_sgs - &
	195	pts_value(0,11) )**2 ! w"2
	196	!
	197	!-- Repeat the same for the respective particle group
	198	IF ( number_of_particle_groups > 1 ) THEN
	199	j = particles(n)%group
	200
	201	pts_value_l(j,17) = pts_value_l(j,17) + ( particles(n)%x - &
	202	particles(n)%origin_x - pts_value(j,2) )**2
	203	pts_value_l(j,18) = pts_value_l(j,18) + ( particles(n)%y - &
	204	particles(n)%origin_y - pts_value(j,3) )**2
	205	pts_value_l(j,19) = pts_value_l(j,19) + ( particles(n)%z - &
	206	particles(n)%origin_z - pts_value(j,4) )**2
	207	pts_value_l(j,20) = pts_value_l(j,20) + ( particles(n)%speed_x - &
	208	pts_value(j,6) )**2
	209	pts_value_l(j,21) = pts_value_l(j,21) + ( particles(n)%speed_y - &
	210	pts_value(j,7) )**2
	211	pts_value_l(j,22) = pts_value_l(j,22) + ( particles(n)%speed_z - &
	212	pts_value(j,8) )**2
	213	pts_value_l(j,23) = pts_value_l(j,23) + ( particles(n)%speed_x_sgs - &
	214	pts_value(j,9) )**2
	215	pts_value_l(j,24) = pts_value_l(j,24) + ( particles(n)%speed_y_sgs - &
	216	pts_value(j,10) )**2
	217	pts_value_l(j,25) = pts_value_l(j,25) + ( particles(n)%speed_z_sgs - &
	218	pts_value(j,11) )**2
	219	ENDIF
	220
	221	ENDDO
	222
	223	pts_value_l(0,26) = ( number_of_particles - pts_value(0,1) / numprocs )**2
	224	! variance of particle numbers
	225	IF ( number_of_particle_groups > 1 ) THEN
	226	DO j = 1, number_of_particle_groups
	227	pts_value_l(j,26) = ( pts_value_l(j,1) - &
	228	pts_value(j,1) / numprocs )**2
	229	ENDDO
	230	ENDIF
	231
	232	#if defined( __parallel )
	233	!
	234	!-- Sum values of the subdomains
	235	inum = number_of_particle_groups + 1
	236
	237	CALL MPI_ALLREDUCE( pts_value_l(0,17), pts_value(0,17), inum*10, MPI_REAL, &
	238	MPI_SUM, comm2d, ierr )
	239	#else
	240	pts_value(:,17:26) = pts_value_l(:,17:26)
	241	#endif
	242
	243	!
	244	!-- Normalize the above calculated quantities with the total number of
	245	!-- particles
	246	IF ( number_of_particle_groups > 1 ) THEN
	247	inum = number_of_particle_groups
	248	ELSE
	249	inum = 0
	250	ENDIF
	251
	252	DO j = 0, inum
	253
	254	IF ( pts_value(j,1) > 0.0 ) THEN
	255	pts_value(j,17:25) = pts_value(j,17:25) / pts_value(j,1)
	256	ENDIF
	257	pts_value(j,26) = pts_value(j,26) / numprocs
	258
	259	ENDDO
	260
	261	#if defined( __netcdf )
	262	!
	263	!-- Output particle time series quantities in NetCDF format
	264	IF ( myid == 0 .AND. netcdf_output ) THEN
	265	DO j = 0, inum
	266	DO i = 1, dopts_num
	267	nc_stat = NF90_PUT_VAR( id_set_pts, id_var_dopts(i,j), &
	268	(/ pts_value(j,i) /), &
	269	start = (/ dopts_time_count /), &
	270	count = (/ 1 /) )
	271	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 392 )
	272	ENDDO
	273	ENDDO
	274	ENDIF
	275	#endif
	276
	277	CALL cpu_log( log_point(36), 'data_output_ptseries','stop', 'nobarrier' )
	278
	279	END SUBROUTINE data_output_ptseries

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/data_output_ptseries.f90 @ 103

Download in other formats: