Home

Context Navigation

source: palm/trunk/SOURCE/data_output_profiles.f90 @ 357

Last change on this file since 357 was 345, checked in by heinze, 15 years ago
In case of restart runs without extension, initial profiles are not written to NetCDF-file anymore.
Property svn:keywords set to `Id`
File size: 25.7 KB

Line
1	SUBROUTINE data_output_profiles
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! In case of restart runs without extension, initial profiles are not written
7	! to NetCDF-file anymore.
8	! simulated_time in NetCDF output replaced by time_since_reference_point.
9	! Output of NetCDF messages with aid of message handling routine.
10	! Output of messages replaced by message handling routine.
11	!
12	!
13	! Former revisions:
14	! -----------------
15	! $Id: data_output_profiles.f90 345 2009-07-01 14:37:56Z heinze $
16	!
17	! 197 2008-09-16 15:29:03Z raasch
18	! Time coordinate t=0 stored on netcdf-file only if an output is required for
19	! this time for at least one of the profiles
20	!
21	! February 2007
22	! RCS Log replace by Id keyword, revision history cleaned up
23	!
24	! 87 2007-05-22 15:46:47Z raasch
25	! var_hom renamed pr_palm
26	!
27	! Revision 1.18 2006/08/16 14:27:04 raasch
28	! PRINT* statements for testing removed
29	!
30	! Revision 1.1 1997/09/12 06:28:48 raasch
31	! Initial revision
32	!
33	!
34	! Description:
35	! ------------
36	! Plot output of 1D-profiles for PROFIL
37	!------------------------------------------------------------------------------!
38
39	USE control_parameters
40	USE cpulog
41	USE indices
42	USE interfaces
43	USE netcdf_control
44	USE pegrid
45	USE profil_parameter
46	USE statistics
47
48	IMPLICIT NONE
49
50
51	INTEGER :: i, id, ilc, ils, j, k, sr
52	REAL :: uxma, uxmi
53
54
55	!
56	!-- If required, compute statistics
57	IF ( .NOT. flow_statistics_called ) CALL flow_statistics
58
59	!
60	!-- Flow_statistics has its own CPU time measurement
61	CALL cpu_log( log_point(15), 'data_output_profiles', 'start' )
62
63	!
64	!-- If required, compute temporal average
65	IF ( averaging_interval_pr == 0.0 ) THEN
66	hom_sum(:,:,:) = hom(:,1,:,:)
67	ELSE
68	IF ( average_count_pr > 0 ) THEN
69	hom_sum = hom_sum / REAL( average_count_pr )
70	ELSE
71	!
72	!-- This case may happen if dt_dopr is changed in the d3par-list of
73	!-- a restart run
74	RETURN
75	ENDIF
76	ENDIF
77
78
79	IF ( myid == 0 ) THEN
80
81	!
82	!-- Plot-output for each (sub-)region
83
84	!
85	!-- Open file for profile output in NetCDF format
86	IF ( netcdf_output ) THEN
87	CALL check_open( 104 )
88	ENDIF
89
90	!
91	!-- Open PROFIL-output files for each (sub-)region
92	IF ( profil_output ) THEN
93	DO sr = 0, statistic_regions
94	CALL check_open( 40 + sr )
95	ENDDO
96	ENDIF
97
98	!
99	!-- Increment the counter for number of output times
100	dopr_time_count = dopr_time_count + 1
101
102	!
103	!-- Re-set to zero the counter for the number of profiles already written
104	!-- at the current output time into the respective crosses
105	cross_pnc_local = 0
106
107	!
108	!-- Output of initial profiles
109	IF ( dopr_time_count == 1 ) THEN
110
111	IF ( .NOT. output_for_t0 ) THEN
112
113	IF ( netcdf_output ) THEN
114	#if defined( __netcdf )
115	!
116	!-- Store initial time (t=0) to time axis, but only if an output
117	!-- is required for at least one of the profiles
118	DO i = 1, dopr_n
119	IF ( dopr_initial_index(i) /= 0 ) THEN
120	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
121	(/ 0.0 /), start = (/ 1 /), &
122	count = (/ 1 /) )
123	CALL handle_netcdf_error( 'data_output_profiles', 329 )
124	output_for_t0 = .TRUE.
125	EXIT
126	ENDIF
127	ENDDO
128
129	!
130	!-- Store normalization factors
131	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
132	(/ hom_sum(nzb,18,normalizing_region) /), &
133	start = (/ 1 /), count = (/ 1 /) )
134	CALL handle_netcdf_error( 'data_output_profiles', 330 )
135
136	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
137	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
138	start = (/ 1 /), count = (/ 1 /) )
139	CALL handle_netcdf_error( 'data_output_profiles', 331 )
140	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
141	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
142	start = (/ 1 /), count = (/ 1 /) )
143	CALL handle_netcdf_error( 'data_output_profiles', 332 )
144	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
145	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
146	start = (/ 1 /), count = (/ 1 /) )
147	CALL handle_netcdf_error( 'data_output_profiles', 333 )
148
149	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), &!ws2tsw
150	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
151	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
152	start = (/ 1 /), count = (/ 1 /) )
153	CALL handle_netcdf_error( 'data_output_profiles', 334 )
154
155	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), &!wstsw2
156	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
157	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
158	start = (/ 1 /), count = (/ 1 /) )
159	CALL handle_netcdf_error( 'data_output_profiles', 335 )
160
161	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
162	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
163	start = (/ 1 /), count = (/ 1 /) )
164	CALL handle_netcdf_error( 'data_output_profiles', 336 )
165
166	#endif
167	ENDIF
168	!
169	!-- Loop over all 1D variables
170	DO i = 1, dopr_n
171
172	IF ( dopr_initial_index(i) /= 0 ) THEN
173
174	!
175	!-- Output for the individual (sub-)regions
176	DO sr = 0, statistic_regions
177
178	IF ( profil_output ) THEN
179	id = 40 + sr
180	!
181	!-- Write Label-Header
182	WRITE ( id, 100 ) TRIM( data_output_pr(i) ), '(t=0)'
183	!
184	!-- Write total profile
185	DO k = nzb, nzt+1
186	WRITE ( id, 101 ) hom(k,2,dopr_initial_index(i),sr), &
187	hom(k,1,dopr_initial_index(i),sr)
188	ENDDO
189	!
190	!-- Write separation label
191	WRITE ( id, 102 )
192	ENDIF
193
194	IF ( netcdf_output ) THEN
195	#if defined( __netcdf )
196	!
197	!-- Write data to netcdf file
198	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
199	hom(nzb:nzt+1,1,dopr_initial_index(i),sr), &
200	start = (/ 1, 1 /), &
201	count = (/ nzt-nzb+2, 1 /) )
202	CALL handle_netcdf_error( 'data_output_profiles', 337 )
203	#endif
204	ENDIF
205
206	ENDDO
207
208	IF ( profil_output ) THEN
209	!
210	!-- Determine indices for later NAMELIST-output (s. below)
211	profile_number = profile_number + 1
212	j = dopr_crossindex(i)
213	IF ( j /= 0 ) THEN
214	cross_profile_number_count(j) = &
215	cross_profile_number_count(j) + 1
216	k = cross_profile_number_count(j)
217	cross_profile_numbers(k,j) = profile_number
218	!
219	!-- Initial profiles are always drawn as solid lines in
220	!-- anti-background colour.
221	cross_linecolors(k,j) = 1
222	cross_linestyles(k,j) = 0
223	!
224	!-- If required, extend x-value range of the respective
225	!-- cross, provided it has not been specified in &
226	!-- check_parameters. Determination over all (sub-)regions.
227	IF ( cross_uxmin(j) == 0.0 .AND. &
228	cross_uxmax(j) == 0.0 ) THEN
229
230	DO sr = 0, statistic_regions
231
232	uxmi = &
233	MINVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
234
235	uxma = &
236	MAXVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
237	!
238	!-- When the value range of the first line in the
239	!-- corresponding cross is determined, its value range
240	!-- is simply adopted.
241	IF ( cross_uxmin_computed(j) > &
242	cross_uxmax_computed(j) ) THEN
243	cross_uxmin_computed(j) = uxmi
244	cross_uxmax_computed(j) = uxma
245	ELSE
246	cross_uxmin_computed(j) = &
247	MIN( cross_uxmin_computed(j), uxmi )
248	cross_uxmax_computed(j) = &
249	MAX( cross_uxmax_computed(j), uxma )
250	ENDIF
251
252	ENDDO
253
254	ENDIF
255	!
256	!-- If required, determine and note normalizing factors
257	SELECT CASE ( cross_normalized_x(j) )
258
259	CASE ( 'ts2' )
260	cross_normx_factor(k,j) = &
261	( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
262	CASE ( 'wpt0' )
263	cross_normx_factor(k,j) = &
264	hom_sum(nzb,18,normalizing_region)
265	CASE ( 'wsts2' )
266	cross_normx_factor(k,j) = &
267	hom_sum(nzb+8,pr_palm,normalizing_region) &
268	* ( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
269	CASE ( 'ws2' )
270	cross_normx_factor(k,j) = &
271	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
272	CASE ( 'ws2ts' )
273	cross_normx_factor(k,j) = &
274	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2 &
275	* hom_sum(nzb+3,pr_palm,normalizing_region)
276	CASE ( 'ws3' )
277	cross_normx_factor(k,j) = &
278	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
279
280	END SELECT
281
282	SELECT CASE ( cross_normalized_y(j) )
283
284	CASE ( 'z_i' )
285	cross_normy_factor(k,j) = &
286	hom_sum(nzb+6,pr_palm,normalizing_region)
287
288	END SELECT
289
290	!
291	!-- Check the normalizing factors for zeros and deactivate
292	!-- the normalization, if required.
293	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
294	cross_normy_factor(k,j) == 0.0 ) THEN
295	WRITE( message_string, * ) 'data_output_profiles: ', &
296	'normalizing cross ',j, ' is not possible ', &
297	'since one of the & normalizing factors ', &
298	'is zero! & cross_normx_factor(',k,',',j,') = ', &
299	cross_normx_factor(k,j), &
300	' & cross_normy_factor(',k,',',j,') = ', &
301	cross_normy_factor(k,j)
302	CALL message( 'data_output_profiles', 'PA0185',&
303	0, 1, 0, 6, 0 )
304	cross_normx_factor(k,j) = 1.0
305	cross_normy_factor(k,j) = 1.0
306	cross_normalized_x(j) = ' '
307	cross_normalized_y(j) = ' '
308	ENDIF
309
310	!
311	!-- If required, extend normalized x-value range of the
312	!-- respective cross, provided it has not been specified in
313	!-- check_parameters. Determination over all (sub-)regions.
314	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
315	cross_uxmax_normalized(j) == 0.0 ) THEN
316
317	DO sr = 0, statistic_regions
318
319	uxmi = MINVAL( hom(:nz_do1d,1, &
320	dopr_initial_index(i),sr) ) / &
321	cross_normx_factor(k,j)
322	uxma = MAXVAL( hom(:nz_do1d,1, &
323	dopr_initial_index(i),sr) ) / &
324	cross_normx_factor(k,j)
325	!
326	!-- When the value range of the first line in the
327	!-- corresponding cross is determined, its value range
328	!-- is simply adopted.
329	IF ( cross_uxmin_normalized_computed(j) > &
330	cross_uxmax_normalized_computed(j) ) THEN
331	cross_uxmin_normalized_computed(j) = uxmi
332	cross_uxmax_normalized_computed(j) = uxma
333	ELSE
334	cross_uxmin_normalized_computed(j) = &
335	MIN( cross_uxmin_normalized_computed(j), uxmi )
336	cross_uxmax_normalized_computed(j) = &
337	MAX( cross_uxmax_normalized_computed(j), uxma )
338	ENDIF
339
340	ENDDO
341
342	ENDIF
343
344	ENDIF ! Index determination
345
346	ENDIF ! profil output
347
348	ENDIF ! Initial profile available
349
350	ENDDO ! Loop over dopr_n for initial profiles
351
352	IF ( netcdf_output .AND. output_for_t0 ) THEN
353	dopr_time_count = dopr_time_count + 1
354	ENDIF
355
356	END IF
357	ENDIF ! Initial profiles
358
359	IF ( netcdf_output ) THEN
360	#if defined( __netcdf )
361
362	!
363	!-- Store time to time axis
364	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
365	(/ time_since_reference_point /), &
366	start = (/ dopr_time_count /), &
367	count = (/ 1 /) )
368	CALL handle_netcdf_error( 'data_output_profiles', 338 )
369
370	!
371	!-- Store normalization factors
372	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
373	(/ hom_sum(nzb,18,normalizing_region) /), &
374	start = (/ dopr_time_count /), &
375	count = (/ 1 /) )
376	CALL handle_netcdf_error( 'data_output_profiles', 339 )
377
378	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
379	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
380	start = (/ dopr_time_count /), &
381	count = (/ 1 /) )
382	CALL handle_netcdf_error( 'data_output_profiles', 340 )
383
384	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
385	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
386	start = (/ dopr_time_count /), &
387	count = (/ 1 /) )
388	CALL handle_netcdf_error( 'data_output_profiles', 341 )
389
390	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
391	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
392	start = (/ dopr_time_count /), &
393	count = (/ 1 /) )
394	CALL handle_netcdf_error( 'data_output_profiles', 342 )
395
396	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
397	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
398	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
399	start = (/ dopr_time_count /), &
400	count = (/ 1 /) )
401	CALL handle_netcdf_error( 'data_output_profiles', 343 )
402
403	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
404	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
405	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
406	start = (/ dopr_time_count /), &
407	count = (/ 1 /) )
408	CALL handle_netcdf_error( 'data_output_profiles', 344 )
409
410	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
411	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
412	start = (/ dopr_time_count /), &
413	count = (/ 1 /) )
414	CALL handle_netcdf_error( 'data_output_profiles', 345 )
415	#endif
416	ENDIF
417
418	!
419	!-- Output of the individual (non-initial) profiles
420	DO i = 1, dopr_n
421
422	!
423	!-- Output for the individual (sub-)domains
424	DO sr = 0, statistic_regions
425
426	IF ( profil_output ) THEN
427	id = 40 + sr
428	!
429	!-- Write Label-Header
430	WRITE ( id, 100 ) TRIM( dopr_label(i) ), simulated_time_chr
431	!
432	!-- Output of total profile
433	DO k = nzb, nzt+1
434	WRITE ( id, 101 ) hom(k,2,dopr_index(i),sr), &
435	hom_sum(k,dopr_index(i),sr)
436	ENDDO
437	!
438	!-- Write separation label
439	WRITE ( id, 102 )
440	ENDIF
441
442	IF ( netcdf_output ) THEN
443	#if defined( __netcdf )
444	!
445	!-- Write data to netcdf file
446	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
447	hom_sum(nzb:nzt+1,dopr_index(i),sr),&
448	start = (/ 1, dopr_time_count /), &
449	count = (/ nzt-nzb+2, 1 /) )
450	CALL handle_netcdf_error( 'data_output_profiles', 346 )
451	#endif
452	ENDIF
453
454	ENDDO
455
456	IF ( profil_output ) THEN
457	!
458	!-- Determine profile number on file and note the data for later
459	!-- NAMELIST output, if the respective profile is to be drawn by
460	!-- PROFIL (if it shall not be drawn, the variable dopr_crossindex has
461	!-- the value 0, otherwise the number of the coordinate cross)
462	profile_number = profile_number + 1
463	j = dopr_crossindex(i)
464
465	IF ( j /= 0 ) THEN
466	cross_profile_number_count(j) = cross_profile_number_count(j) +1
467	k = cross_profile_number_count(j)
468	cross_pnc_local(j) = cross_pnc_local(j) +1
469	cross_profile_numbers(k,j) = profile_number
470	ilc = MOD( dopr_time_count, 10 )
471	IF ( ilc == 0 ) ilc = 10
472	cross_linecolors(k,j) = linecolors(ilc)
473	ils = MOD( cross_pnc_local(j), 11 )
474	IF ( ils == 0 ) ils = 11
475	cross_linestyles(k,j) = linestyles(ils)
476	!
477	!-- If required, extend x-value range of the respective coordinate
478	!-- cross, provided it has not been specified in check_parameters.
479	!-- Determination over all (sub-)regions.
480	IF ( cross_uxmin(j) == 0.0 .AND. cross_uxmax(j) == 0.0 ) THEN
481
482	DO sr = 0, statistic_regions
483
484	uxmi = MINVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
485	uxma = MAXVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
486	!
487	!-- When the value range of the first line in the
488	!-- corresponding cross is determined, its value range is
489	!-- simply adopted.
490	IF ( cross_uxmin_computed(j) > cross_uxmax_computed(j) ) &
491	THEN
492	cross_uxmin_computed(j) = uxmi
493	cross_uxmax_computed(j) = uxma
494	ELSE
495	cross_uxmin_computed(j) = &
496	MIN( cross_uxmin_computed(j), uxmi )
497	cross_uxmax_computed(j) = &
498	MAX( cross_uxmax_computed(j), uxma )
499	ENDIF
500
501	ENDDO
502
503	ENDIF
504	!
505	!-- If required, store the normalizing factors
506	SELECT CASE ( cross_normalized_x(j) )
507
508	CASE ( 'tsw2' )
509	cross_normx_factor(k,j) = &
510	( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
511	CASE ( 'wpt0' )
512	cross_normx_factor(k,j) = &
513	hom_sum(nzb,18,normalizing_region)
514	CASE ( 'wstsw2' )
515	cross_normx_factor(k,j) = &
516	hom_sum(nzb+8,pr_palm,normalizing_region) &
517	* ( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
518	CASE ( 'ws2' )
519	cross_normx_factor(k,j) = &
520	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
521	CASE ( 'ws2tsw' )
522	cross_normx_factor(k,j) = &
523	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2&
524	* hom_sum(nzb+11,pr_palm,normalizing_region)
525	CASE ( 'ws3' )
526	cross_normx_factor(k,j) = &
527	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
528
529	END SELECT
530	SELECT CASE ( cross_normalized_y(j) )
531
532	CASE ( 'z_i' )
533	cross_normy_factor(k,j) = &
534	hom_sum(nzb+6,pr_palm,normalizing_region)
535
536	END SELECT
537
538	!
539	!-- Check the normalizing factors for zeros and deactivate
540	!-- the normalization, if required.
541	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
542	cross_normy_factor(k,j) == 0.0 ) THEN
543	WRITE( message_string, * ) 'data_output_profiles: ', &
544	'normalizing cross ',j, ' is not possible ', &
545	'since one of the & normalizing factors ', &
546	'is zero! & cross_normx_factor(',k,',',j,') = ', &
547	cross_normx_factor(k,j), &
548	' & cross_normy_factor(',k,',',j,') = ', &
549	cross_normy_factor(k,j)
550	CALL message( 'data_output_profiles', 'PA0185',&
551	0, 1, 0, 6, 0 )
552	cross_normx_factor(k,j) = 1.0
553	cross_normy_factor(k,j) = 1.0
554	cross_normalized_x(j) = ' '
555	cross_normalized_y(j) = ' '
556	ENDIF
557
558	!
559	!-- If required, extend normalized x-value range of the respective
560	!-- cross, provided it has not been specified in check_parameters.
561	!-- Determination over all (sub-)regions.
562	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
563	cross_uxmax_normalized(j) == 0.0 ) THEN
564
565	DO sr = 0, statistic_regions
566
567	uxmi = MINVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
568	cross_normx_factor(k,j)
569	uxma = MAXVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
570	cross_normx_factor(k,j)
571	!
572	!-- When the value range of the first line in the
573	!-- corresponding cross is determined, its value range is
574	!-- simply adopted.
575	IF ( cross_uxmin_normalized_computed(j) > &
576	cross_uxmax_normalized_computed(j) ) THEN
577	cross_uxmin_normalized_computed(j) = uxmi
578	cross_uxmax_normalized_computed(j) = uxma
579	ELSE
580	cross_uxmin_normalized_computed(j) = &
581	MIN( cross_uxmin_normalized_computed(j), uxmi )
582	cross_uxmax_normalized_computed(j) = &
583	MAX( cross_uxmax_normalized_computed(j), uxma )
584	ENDIF
585
586	ENDDO
587
588	ENDIF
589
590	ENDIF ! Index determination
591
592	ENDIF ! profil output
593
594	ENDDO ! Loop over dopr_n
595
596	ENDIF ! Output on PE0
597
598	!
599	!-- If averaging has been done above, the summation counter must be re-set.
600	IF ( averaging_interval_pr /= 0.0 ) THEN
601	average_count_pr = 0
602	ENDIF
603
604	CALL cpu_log( log_point(15), 'data_output_profiles','stop', 'nobarrier' )
605
606	!
607	!-- Formats
608	100 FORMAT ('#1 ',A,1X,A)
609	101 FORMAT (E15.7,1X,E15.7)
610	102 FORMAT ('NEXT')
611
612	END SUBROUTINE data_output_profiles

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |