Home

Context Navigation

source: palm/trunk/SOURCE/data_output_profiles.f90 @ 325

Last change on this file since 325 was 291, checked in by raasch, 16 years ago
changes for coupling with independent precursor runs; z_i calculation with Sullivan criterion
Property svn:keywords set to `Id`
File size: 25.0 KB

Line
1	SUBROUTINE data_output_profiles
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! simulated_time in NetCDF output replaced by time_since_reference_point.
7	! Output of NetCDF messages with aid of message handling routine.
8	! Output of messages replaced by message handling routine.
9	!
10	!
11	! Former revisions:
12	! -----------------
13	! $Id: data_output_profiles.f90 291 2009-04-16 12:07:26Z raasch $
14	!
15	! 197 2008-09-16 15:29:03Z raasch
16	! Time coordinate t=0 stored on netcdf-file only if an output is required for
17	! this time for at least one of the profiles
18	!
19	! February 2007
20	! RCS Log replace by Id keyword, revision history cleaned up
21	!
22	! 87 2007-05-22 15:46:47Z raasch
23	! var_hom renamed pr_palm
24	!
25	! Revision 1.18 2006/08/16 14:27:04 raasch
26	! PRINT* statements for testing removed
27	!
28	! Revision 1.1 1997/09/12 06:28:48 raasch
29	! Initial revision
30	!
31	!
32	! Description:
33	! ------------
34	! Plot output of 1D-profiles for PROFIL
35	!------------------------------------------------------------------------------!
36
37	USE control_parameters
38	USE cpulog
39	USE indices
40	USE interfaces
41	USE netcdf_control
42	USE pegrid
43	USE profil_parameter
44	USE statistics
45
46	IMPLICIT NONE
47
48
49	INTEGER :: i, id, ilc, ils, j, k, sr
50	LOGICAL :: output_for_t0
51	REAL :: uxma, uxmi
52
53
54	!
55	!-- If required, compute statistics
56	IF ( .NOT. flow_statistics_called ) CALL flow_statistics
57
58	!
59	!-- Flow_statistics has its own CPU time measurement
60	CALL cpu_log( log_point(15), 'data_output_profiles', 'start' )
61
62	!
63	!-- If required, compute temporal average
64	IF ( averaging_interval_pr == 0.0 ) THEN
65	hom_sum(:,:,:) = hom(:,1,:,:)
66	ELSE
67	IF ( average_count_pr > 0 ) THEN
68	hom_sum = hom_sum / REAL( average_count_pr )
69	ELSE
70	!
71	!-- This case may happen if dt_dopr is changed in the d3par-list of
72	!-- a restart run
73	RETURN
74	ENDIF
75	ENDIF
76
77
78	IF ( myid == 0 ) THEN
79
80	!
81	!-- Plot-output for each (sub-)region
82
83	!
84	!-- Open file for profile output in NetCDF format
85	IF ( netcdf_output ) THEN
86	CALL check_open( 104 )
87	ENDIF
88
89	!
90	!-- Open PROFIL-output files for each (sub-)region
91	IF ( profil_output ) THEN
92	DO sr = 0, statistic_regions
93	CALL check_open( 40 + sr )
94	ENDDO
95	ENDIF
96
97	!
98	!-- Increment the counter for number of output times
99	dopr_time_count = dopr_time_count + 1
100
101	!
102	!-- Re-set to zero the counter for the number of profiles already written
103	!-- at the current output time into the respective crosses
104	cross_pnc_local = 0
105
106	!
107	!-- Output of initial profiles
108	IF ( dopr_time_count == 1 ) THEN
109
110	IF ( netcdf_output ) THEN
111	#if defined( __netcdf )
112	!
113	!-- Store initial time (t=0) to time axis, but only if an output
114	!-- is required for at least one of the profiles
115	output_for_t0 = .FALSE.
116	DO i = 1, dopr_n
117	IF ( dopr_initial_index(i) /= 0 ) THEN
118	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
119	(/ 0.0 /), start = (/ 1 /), &
120	count = (/ 1 /) )
121	CALL handle_netcdf_error( 'data_output_profiles', 329 )
122	output_for_t0 = .TRUE.
123	EXIT
124	ENDIF
125	ENDDO
126
127	!
128	!-- Store normalization factors
129	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
130	(/ hom_sum(nzb,18,normalizing_region) /), &
131	start = (/ 1 /), count = (/ 1 /) )
132	CALL handle_netcdf_error( 'data_output_profiles', 330 )
133
134	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
135	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
136	start = (/ 1 /), count = (/ 1 /) )
137	CALL handle_netcdf_error( 'data_output_profiles', 331 )
138	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
139	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
140	start = (/ 1 /), count = (/ 1 /) )
141	CALL handle_netcdf_error( 'data_output_profiles', 332 )
142	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
143	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
144	start = (/ 1 /), count = (/ 1 /) )
145	CALL handle_netcdf_error( 'data_output_profiles', 333 )
146
147	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
148	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
149	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
150	start = (/ 1 /), count = (/ 1 /) )
151	CALL handle_netcdf_error( 'data_output_profiles', 334 )
152
153	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
154	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
155	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
156	start = (/ 1 /), count = (/ 1 /) )
157	CALL handle_netcdf_error( 'data_output_profiles', 335 )
158
159	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
160	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
161	start = (/ 1 /), count = (/ 1 /) )
162	CALL handle_netcdf_error( 'data_output_profiles', 336 )
163	#endif
164	ENDIF
165	!
166	!-- Loop over all 1D variables
167	DO i = 1, dopr_n
168
169	IF ( dopr_initial_index(i) /= 0 ) THEN
170
171	!
172	!-- Output for the individual (sub-)regions
173	DO sr = 0, statistic_regions
174
175	IF ( profil_output ) THEN
176	id = 40 + sr
177	!
178	!-- Write Label-Header
179	WRITE ( id, 100 ) TRIM( data_output_pr(i) ), '(t=0)'
180	!
181	!-- Write total profile
182	DO k = nzb, nzt+1
183	WRITE ( id, 101 ) hom(k,2,dopr_initial_index(i),sr), &
184	hom(k,1,dopr_initial_index(i),sr)
185	ENDDO
186	!
187	!-- Write separation label
188	WRITE ( id, 102 )
189	ENDIF
190
191	IF ( netcdf_output ) THEN
192	#if defined( __netcdf )
193	!
194	!-- Write data to netcdf file
195	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
196	hom(nzb:nzt+1,1,dopr_initial_index(i),sr), &
197	start = (/ 1, 1 /), &
198	count = (/ nzt-nzb+2, 1 /) )
199	CALL handle_netcdf_error( 'data_output_profiles', 337 )
200	#endif
201	ENDIF
202
203	ENDDO
204
205	IF ( profil_output ) THEN
206	!
207	!-- Determine indices for later NAMELIST-output (s. below)
208	profile_number = profile_number + 1
209	j = dopr_crossindex(i)
210	IF ( j /= 0 ) THEN
211	cross_profile_number_count(j) = &
212	cross_profile_number_count(j) + 1
213	k = cross_profile_number_count(j)
214	cross_profile_numbers(k,j) = profile_number
215	!
216	!-- Initial profiles are always drawn as solid lines in
217	!-- anti-background colour.
218	cross_linecolors(k,j) = 1
219	cross_linestyles(k,j) = 0
220	!
221	!-- If required, extend x-value range of the respective
222	!-- cross, provided it has not been specified in &
223	!-- check_parameters. Determination over all (sub-)regions.
224	IF ( cross_uxmin(j) == 0.0 .AND. &
225	cross_uxmax(j) == 0.0 ) THEN
226
227	DO sr = 0, statistic_regions
228
229	uxmi = &
230	MINVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
231
232	uxma = &
233	MAXVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
234	!
235	!-- When the value range of the first line in the
236	!-- corresponding cross is determined, its value range
237	!-- is simply adopted.
238	IF ( cross_uxmin_computed(j) > &
239	cross_uxmax_computed(j) ) THEN
240	cross_uxmin_computed(j) = uxmi
241	cross_uxmax_computed(j) = uxma
242	ELSE
243	cross_uxmin_computed(j) = &
244	MIN( cross_uxmin_computed(j), uxmi )
245	cross_uxmax_computed(j) = &
246	MAX( cross_uxmax_computed(j), uxma )
247	ENDIF
248
249	ENDDO
250
251	ENDIF
252	!
253	!-- If required, determine and note normalizing factors
254	SELECT CASE ( cross_normalized_x(j) )
255
256	CASE ( 'ts2' )
257	cross_normx_factor(k,j) = &
258	( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
259	CASE ( 'wpt0' )
260	cross_normx_factor(k,j) = &
261	hom_sum(nzb,18,normalizing_region)
262	CASE ( 'wsts2' )
263	cross_normx_factor(k,j) = &
264	hom_sum(nzb+8,pr_palm,normalizing_region) &
265	* ( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
266	CASE ( 'ws2' )
267	cross_normx_factor(k,j) = &
268	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
269	CASE ( 'ws2ts' )
270	cross_normx_factor(k,j) = &
271	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2 &
272	* hom_sum(nzb+3,pr_palm,normalizing_region)
273	CASE ( 'ws3' )
274	cross_normx_factor(k,j) = &
275	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
276
277	END SELECT
278
279	SELECT CASE ( cross_normalized_y(j) )
280
281	CASE ( 'z_i' )
282	cross_normy_factor(k,j) = &
283	hom_sum(nzb+6,pr_palm,normalizing_region)
284
285	END SELECT
286
287	!
288	!-- Check the normalizing factors for zeros and deactivate
289	!-- the normalization, if required.
290	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
291	cross_normy_factor(k,j) == 0.0 ) THEN
292	WRITE( message_string, * ) 'data_output_profiles: ', &
293	'normalizing cross ',j, ' is not possible ', &
294	'since one of the & normalizing factors ', &
295	'is zero! & cross_normx_factor(',k,',',j,') = ', &
296	cross_normx_factor(k,j), &
297	' & cross_normy_factor(',k,',',j,') = ', &
298	cross_normy_factor(k,j)
299	CALL message( 'data_output_profiles', 'PA0185',&
300	0, 1, 0, 6, 0 )
301	cross_normx_factor(k,j) = 1.0
302	cross_normy_factor(k,j) = 1.0
303	cross_normalized_x(j) = ' '
304	cross_normalized_y(j) = ' '
305	ENDIF
306
307	!
308	!-- If required, extend normalized x-value range of the
309	!-- respective cross, provided it has not been specified in
310	!-- check_parameters. Determination over all (sub-)regions.
311	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
312	cross_uxmax_normalized(j) == 0.0 ) THEN
313
314	DO sr = 0, statistic_regions
315
316	uxmi = MINVAL( hom(:nz_do1d,1, &
317	dopr_initial_index(i),sr) ) / &
318	cross_normx_factor(k,j)
319	uxma = MAXVAL( hom(:nz_do1d,1, &
320	dopr_initial_index(i),sr) ) / &
321	cross_normx_factor(k,j)
322	!
323	!-- When the value range of the first line in the
324	!-- corresponding cross is determined, its value range
325	!-- is simply adopted.
326	IF ( cross_uxmin_normalized_computed(j) > &
327	cross_uxmax_normalized_computed(j) ) THEN
328	cross_uxmin_normalized_computed(j) = uxmi
329	cross_uxmax_normalized_computed(j) = uxma
330	ELSE
331	cross_uxmin_normalized_computed(j) = &
332	MIN( cross_uxmin_normalized_computed(j), uxmi )
333	cross_uxmax_normalized_computed(j) = &
334	MAX( cross_uxmax_normalized_computed(j), uxma )
335	ENDIF
336
337	ENDDO
338
339	ENDIF
340
341	ENDIF ! Index determination
342
343	ENDIF ! profil output
344
345	ENDIF ! Initial profile available
346
347	ENDDO ! Loop over dopr_n for initial profiles
348
349	IF ( netcdf_output .AND. output_for_t0 ) THEN
350	dopr_time_count = dopr_time_count + 1
351	ENDIF
352
353	ENDIF ! Initial profiles
354
355	IF ( netcdf_output ) THEN
356	#if defined( __netcdf )
357	!
358	!-- Store time to time axis
359	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
360	(/ time_since_reference_point /), &
361	start = (/ dopr_time_count /), &
362	count = (/ 1 /) )
363	CALL handle_netcdf_error( 'data_output_profiles', 338 )
364
365	!
366	!-- Store normalization factors
367	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
368	(/ hom_sum(nzb,18,normalizing_region) /), &
369	start = (/ dopr_time_count /), &
370	count = (/ 1 /) )
371	CALL handle_netcdf_error( 'data_output_profiles', 339 )
372
373	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
374	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
375	start = (/ dopr_time_count /), &
376	count = (/ 1 /) )
377	CALL handle_netcdf_error( 'data_output_profiles', 340 )
378
379	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
380	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
381	start = (/ dopr_time_count /), &
382	count = (/ 1 /) )
383	CALL handle_netcdf_error( 'data_output_profiles', 341 )
384
385	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
386	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
387	start = (/ dopr_time_count /), &
388	count = (/ 1 /) )
389	CALL handle_netcdf_error( 'data_output_profiles', 342 )
390
391	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
392	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
393	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
394	start = (/ dopr_time_count /), &
395	count = (/ 1 /) )
396	CALL handle_netcdf_error( 'data_output_profiles', 343 )
397
398	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
399	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
400	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
401	start = (/ dopr_time_count /), &
402	count = (/ 1 /) )
403	CALL handle_netcdf_error( 'data_output_profiles', 344 )
404
405	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
406	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
407	start = (/ dopr_time_count /), &
408	count = (/ 1 /) )
409	CALL handle_netcdf_error( 'data_output_profiles', 345 )
410	#endif
411	ENDIF
412
413	!
414	!-- Output of the individual (non-initial) profiles
415	DO i = 1, dopr_n
416
417	!
418	!-- Output for the individual (sub-)domains
419	DO sr = 0, statistic_regions
420
421	IF ( profil_output ) THEN
422	id = 40 + sr
423	!
424	!-- Write Label-Header
425	WRITE ( id, 100 ) TRIM( dopr_label(i) ), simulated_time_chr
426	!
427	!-- Output of total profile
428	DO k = nzb, nzt+1
429	WRITE ( id, 101 ) hom(k,2,dopr_index(i),sr), &
430	hom_sum(k,dopr_index(i),sr)
431	ENDDO
432	!
433	!-- Write separation label
434	WRITE ( id, 102 )
435	ENDIF
436
437	IF ( netcdf_output ) THEN
438	#if defined( __netcdf )
439	!
440	!-- Write data to netcdf file
441	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
442	hom_sum(nzb:nzt+1,dopr_index(i),sr),&
443	start = (/ 1, dopr_time_count /), &
444	count = (/ nzt-nzb+2, 1 /) )
445	CALL handle_netcdf_error( 'data_output_profiles', 346 )
446	#endif
447	ENDIF
448
449	ENDDO
450
451	IF ( profil_output ) THEN
452	!
453	!-- Determine profile number on file and note the data for later
454	!-- NAMELIST output, if the respective profile is to be drawn by
455	!-- PROFIL (if it shall not be drawn, the variable dopr_crossindex has
456	!-- the value 0, otherwise the number of the coordinate cross)
457	profile_number = profile_number + 1
458	j = dopr_crossindex(i)
459
460	IF ( j /= 0 ) THEN
461	cross_profile_number_count(j) = cross_profile_number_count(j) +1
462	k = cross_profile_number_count(j)
463	cross_pnc_local(j) = cross_pnc_local(j) +1
464	cross_profile_numbers(k,j) = profile_number
465	ilc = MOD( dopr_time_count, 10 )
466	IF ( ilc == 0 ) ilc = 10
467	cross_linecolors(k,j) = linecolors(ilc)
468	ils = MOD( cross_pnc_local(j), 11 )
469	IF ( ils == 0 ) ils = 11
470	cross_linestyles(k,j) = linestyles(ils)
471	!
472	!-- If required, extend x-value range of the respective coordinate
473	!-- cross, provided it has not been specified in check_parameters.
474	!-- Determination over all (sub-)regions.
475	IF ( cross_uxmin(j) == 0.0 .AND. cross_uxmax(j) == 0.0 ) THEN
476
477	DO sr = 0, statistic_regions
478
479	uxmi = MINVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
480	uxma = MAXVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
481	!
482	!-- When the value range of the first line in the
483	!-- corresponding cross is determined, its value range is
484	!-- simply adopted.
485	IF ( cross_uxmin_computed(j) > cross_uxmax_computed(j) ) &
486	THEN
487	cross_uxmin_computed(j) = uxmi
488	cross_uxmax_computed(j) = uxma
489	ELSE
490	cross_uxmin_computed(j) = &
491	MIN( cross_uxmin_computed(j), uxmi )
492	cross_uxmax_computed(j) = &
493	MAX( cross_uxmax_computed(j), uxma )
494	ENDIF
495
496	ENDDO
497
498	ENDIF
499	!
500	!-- If required, store the normalizing factors
501	SELECT CASE ( cross_normalized_x(j) )
502
503	CASE ( 'tsw2' )
504	cross_normx_factor(k,j) = &
505	( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
506	CASE ( 'wpt0' )
507	cross_normx_factor(k,j) = &
508	hom_sum(nzb,18,normalizing_region)
509	CASE ( 'wstsw2' )
510	cross_normx_factor(k,j) = &
511	hom_sum(nzb+8,pr_palm,normalizing_region) &
512	* ( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
513	CASE ( 'ws2' )
514	cross_normx_factor(k,j) = &
515	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
516	CASE ( 'ws2tsw' )
517	cross_normx_factor(k,j) = &
518	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2&
519	* hom_sum(nzb+11,pr_palm,normalizing_region)
520	CASE ( 'ws3' )
521	cross_normx_factor(k,j) = &
522	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
523
524	END SELECT
525	SELECT CASE ( cross_normalized_y(j) )
526
527	CASE ( 'z_i' )
528	cross_normy_factor(k,j) = &
529	hom_sum(nzb+6,pr_palm,normalizing_region)
530
531	END SELECT
532
533	!
534	!-- Check the normalizing factors for zeros and deactivate
535	!-- the normalization, if required.
536	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
537	cross_normy_factor(k,j) == 0.0 ) THEN
538	WRITE( message_string, * ) 'data_output_profiles: ', &
539	'normalizing cross ',j, ' is not possible ', &
540	'since one of the & normalizing factors ', &
541	'is zero! & cross_normx_factor(',k,',',j,') = ', &
542	cross_normx_factor(k,j), &
543	' & cross_normy_factor(',k,',',j,') = ', &
544	cross_normy_factor(k,j)
545	CALL message( 'data_output_profiles', 'PA0185',&
546	0, 1, 0, 6, 0 )
547	cross_normx_factor(k,j) = 1.0
548	cross_normy_factor(k,j) = 1.0
549	cross_normalized_x(j) = ' '
550	cross_normalized_y(j) = ' '
551	ENDIF
552
553	!
554	!-- If required, extend normalized x-value range of the respective
555	!-- cross, provided it has not been specified in check_parameters.
556	!-- Determination over all (sub-)regions.
557	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
558	cross_uxmax_normalized(j) == 0.0 ) THEN
559
560	DO sr = 0, statistic_regions
561
562	uxmi = MINVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
563	cross_normx_factor(k,j)
564	uxma = MAXVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
565	cross_normx_factor(k,j)
566	!
567	!-- When the value range of the first line in the
568	!-- corresponding cross is determined, its value range is
569	!-- simply adopted.
570	IF ( cross_uxmin_normalized_computed(j) > &
571	cross_uxmax_normalized_computed(j) ) THEN
572	cross_uxmin_normalized_computed(j) = uxmi
573	cross_uxmax_normalized_computed(j) = uxma
574	ELSE
575	cross_uxmin_normalized_computed(j) = &
576	MIN( cross_uxmin_normalized_computed(j), uxmi )
577	cross_uxmax_normalized_computed(j) = &
578	MAX( cross_uxmax_normalized_computed(j), uxma )
579	ENDIF
580
581	ENDDO
582
583	ENDIF
584
585	ENDIF ! Index determination
586
587	ENDIF ! profil output
588
589	ENDDO ! Loop over dopr_n
590
591	ENDIF ! Output on PE0
592
593	!
594	!-- If averaging has been done above, the summation counter must be re-set.
595	IF ( averaging_interval_pr /= 0.0 ) THEN
596	average_count_pr = 0
597	ENDIF
598
599	CALL cpu_log( log_point(15), 'data_output_profiles','stop', 'nobarrier' )
600
601	!
602	!-- Formats
603	100 FORMAT ('#1 ',A,1X,A)
604	101 FORMAT (E15.7,1X,E15.7)
605	102 FORMAT ('NEXT')
606
607	END SUBROUTINE data_output_profiles

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |