Home

Context Navigation

source: palm/trunk/SOURCE/data_output_profiles.f90 @ 289

Last change on this file since 289 was 274, checked in by heinze, 16 years ago
Indentation of the message calls corrected
Property svn:keywords set to `Id`
File size: 24.9 KB

Line
1	SUBROUTINE data_output_profiles
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! Output of NetCDF messages with aid of message handling routine.
7	! Output of messages replaced by message handling routine.
8	!
9	!
10	! Former revisions:
11	! -----------------
12	! $Id: data_output_profiles.f90 274 2009-03-26 15:11:21Z letzel $
13	!
14	! 197 2008-09-16 15:29:03Z raasch
15	! Time coordinate t=0 stored on netcdf-file only if an output is required for
16	! this time for at least one of the profiles
17	!
18	! February 2007
19	! RCS Log replace by Id keyword, revision history cleaned up
20	!
21	! 87 2007-05-22 15:46:47Z raasch
22	! var_hom renamed pr_palm
23	!
24	! Revision 1.18 2006/08/16 14:27:04 raasch
25	! PRINT* statements for testing removed
26	!
27	! Revision 1.1 1997/09/12 06:28:48 raasch
28	! Initial revision
29	!
30	!
31	! Description:
32	! ------------
33	! Plot output of 1D-profiles for PROFIL
34	!------------------------------------------------------------------------------!
35
36	USE control_parameters
37	USE cpulog
38	USE indices
39	USE interfaces
40	USE netcdf_control
41	USE pegrid
42	USE profil_parameter
43	USE statistics
44
45	IMPLICIT NONE
46
47
48	INTEGER :: i, id, ilc, ils, j, k, sr
49	LOGICAL :: output_for_t0
50	REAL :: uxma, uxmi
51
52
53	!
54	!-- If required, compute statistics
55	IF ( .NOT. flow_statistics_called ) CALL flow_statistics
56
57	!
58	!-- Flow_statistics has its own CPU time measurement
59	CALL cpu_log( log_point(15), 'data_output_profiles', 'start' )
60
61	!
62	!-- If required, compute temporal average
63	IF ( averaging_interval_pr == 0.0 ) THEN
64	hom_sum(:,:,:) = hom(:,1,:,:)
65	ELSE
66	IF ( average_count_pr > 0 ) THEN
67	hom_sum = hom_sum / REAL( average_count_pr )
68	ELSE
69	!
70	!-- This case may happen if dt_dopr is changed in the d3par-list of
71	!-- a restart run
72	RETURN
73	ENDIF
74	ENDIF
75
76
77	IF ( myid == 0 ) THEN
78
79	!
80	!-- Plot-output for each (sub-)region
81
82	!
83	!-- Open file for profile output in NetCDF format
84	IF ( netcdf_output ) THEN
85	CALL check_open( 104 )
86	ENDIF
87
88	!
89	!-- Open PROFIL-output files for each (sub-)region
90	IF ( profil_output ) THEN
91	DO sr = 0, statistic_regions
92	CALL check_open( 40 + sr )
93	ENDDO
94	ENDIF
95
96	!
97	!-- Increment the counter for number of output times
98	dopr_time_count = dopr_time_count + 1
99
100	!
101	!-- Re-set to zero the counter for the number of profiles already written
102	!-- at the current output time into the respective crosses
103	cross_pnc_local = 0
104
105	!
106	!-- Output of initial profiles
107	IF ( dopr_time_count == 1 ) THEN
108
109	IF ( netcdf_output ) THEN
110	#if defined( __netcdf )
111	!
112	!-- Store initial time (t=0) to time axis, but only if an output
113	!-- is required for at least one of the profiles
114	output_for_t0 = .FALSE.
115	DO i = 1, dopr_n
116	IF ( dopr_initial_index(i) /= 0 ) THEN
117	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
118	(/ 0.0 /), start = (/ 1 /), &
119	count = (/ 1 /) )
120	CALL handle_netcdf_error( 'data_output_profiles', 329 )
121	output_for_t0 = .TRUE.
122	EXIT
123	ENDIF
124	ENDDO
125
126	!
127	!-- Store normalization factors
128	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
129	(/ hom_sum(nzb,18,normalizing_region) /), &
130	start = (/ 1 /), count = (/ 1 /) )
131	CALL handle_netcdf_error( 'data_output_profiles', 330 )
132
133	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
134	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
135	start = (/ 1 /), count = (/ 1 /) )
136	CALL handle_netcdf_error( 'data_output_profiles', 331 )
137	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
138	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
139	start = (/ 1 /), count = (/ 1 /) )
140	CALL handle_netcdf_error( 'data_output_profiles', 332 )
141	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
142	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
143	start = (/ 1 /), count = (/ 1 /) )
144	CALL handle_netcdf_error( 'data_output_profiles', 333 )
145
146	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
147	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
148	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
149	start = (/ 1 /), count = (/ 1 /) )
150	CALL handle_netcdf_error( 'data_output_profiles', 334 )
151
152	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
153	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
154	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
155	start = (/ 1 /), count = (/ 1 /) )
156	CALL handle_netcdf_error( 'data_output_profiles', 335 )
157
158	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
159	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
160	start = (/ 1 /), count = (/ 1 /) )
161	CALL handle_netcdf_error( 'data_output_profiles', 336 )
162	#endif
163	ENDIF
164	!
165	!-- Loop over all 1D variables
166	DO i = 1, dopr_n
167
168	IF ( dopr_initial_index(i) /= 0 ) THEN
169
170	!
171	!-- Output for the individual (sub-)regions
172	DO sr = 0, statistic_regions
173
174	IF ( profil_output ) THEN
175	id = 40 + sr
176	!
177	!-- Write Label-Header
178	WRITE ( id, 100 ) TRIM( data_output_pr(i) ), '(t=0)'
179	!
180	!-- Write total profile
181	DO k = nzb, nzt+1
182	WRITE ( id, 101 ) hom(k,2,dopr_initial_index(i),sr), &
183	hom(k,1,dopr_initial_index(i),sr)
184	ENDDO
185	!
186	!-- Write separation label
187	WRITE ( id, 102 )
188	ENDIF
189
190	IF ( netcdf_output ) THEN
191	#if defined( __netcdf )
192	!
193	!-- Write data to netcdf file
194	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
195	hom(nzb:nzt+1,1,dopr_initial_index(i),sr), &
196	start = (/ 1, 1 /), &
197	count = (/ nzt-nzb+2, 1 /) )
198	CALL handle_netcdf_error( 'data_output_profiles', 337 )
199	#endif
200	ENDIF
201
202	ENDDO
203
204	IF ( profil_output ) THEN
205	!
206	!-- Determine indices for later NAMELIST-output (s. below)
207	profile_number = profile_number + 1
208	j = dopr_crossindex(i)
209	IF ( j /= 0 ) THEN
210	cross_profile_number_count(j) = &
211	cross_profile_number_count(j) + 1
212	k = cross_profile_number_count(j)
213	cross_profile_numbers(k,j) = profile_number
214	!
215	!-- Initial profiles are always drawn as solid lines in
216	!-- anti-background colour.
217	cross_linecolors(k,j) = 1
218	cross_linestyles(k,j) = 0
219	!
220	!-- If required, extend x-value range of the respective
221	!-- cross, provided it has not been specified in &
222	!-- check_parameters. Determination over all (sub-)regions.
223	IF ( cross_uxmin(j) == 0.0 .AND. &
224	cross_uxmax(j) == 0.0 ) THEN
225
226	DO sr = 0, statistic_regions
227
228	uxmi = &
229	MINVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
230
231	uxma = &
232	MAXVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
233	!
234	!-- When the value range of the first line in the
235	!-- corresponding cross is determined, its value range
236	!-- is simply adopted.
237	IF ( cross_uxmin_computed(j) > &
238	cross_uxmax_computed(j) ) THEN
239	cross_uxmin_computed(j) = uxmi
240	cross_uxmax_computed(j) = uxma
241	ELSE
242	cross_uxmin_computed(j) = &
243	MIN( cross_uxmin_computed(j), uxmi )
244	cross_uxmax_computed(j) = &
245	MAX( cross_uxmax_computed(j), uxma )
246	ENDIF
247
248	ENDDO
249
250	ENDIF
251	!
252	!-- If required, determine and note normalizing factors
253	SELECT CASE ( cross_normalized_x(j) )
254
255	CASE ( 'ts2' )
256	cross_normx_factor(k,j) = &
257	( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
258	CASE ( 'wpt0' )
259	cross_normx_factor(k,j) = &
260	hom_sum(nzb,18,normalizing_region)
261	CASE ( 'wsts2' )
262	cross_normx_factor(k,j) = &
263	hom_sum(nzb+8,pr_palm,normalizing_region) &
264	* ( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
265	CASE ( 'ws2' )
266	cross_normx_factor(k,j) = &
267	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
268	CASE ( 'ws2ts' )
269	cross_normx_factor(k,j) = &
270	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2 &
271	* hom_sum(nzb+3,pr_palm,normalizing_region)
272	CASE ( 'ws3' )
273	cross_normx_factor(k,j) = &
274	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
275
276	END SELECT
277
278	SELECT CASE ( cross_normalized_y(j) )
279
280	CASE ( 'z_i' )
281	cross_normy_factor(k,j) = &
282	hom_sum(nzb+6,pr_palm,normalizing_region)
283
284	END SELECT
285
286	!
287	!-- Check the normalizing factors for zeros and deactivate
288	!-- the normalization, if required.
289	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
290	cross_normy_factor(k,j) == 0.0 ) THEN
291	WRITE( message_string, * ) 'data_output_profiles: ', &
292	'normalizing cross ',j, ' is not possible ', &
293	'since one of the & normalizing factors ', &
294	'is zero! & cross_normx_factor(',k,',',j,') = ', &
295	cross_normx_factor(k,j), &
296	' & cross_normy_factor(',k,',',j,') = ', &
297	cross_normy_factor(k,j)
298	CALL message( 'data_output_profiles', 'PA0185',&
299	0, 1, 0, 6, 0 )
300	cross_normx_factor(k,j) = 1.0
301	cross_normy_factor(k,j) = 1.0
302	cross_normalized_x(j) = ' '
303	cross_normalized_y(j) = ' '
304	ENDIF
305
306	!
307	!-- If required, extend normalized x-value range of the
308	!-- respective cross, provided it has not been specified in
309	!-- check_parameters. Determination over all (sub-)regions.
310	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
311	cross_uxmax_normalized(j) == 0.0 ) THEN
312
313	DO sr = 0, statistic_regions
314
315	uxmi = MINVAL( hom(:nz_do1d,1, &
316	dopr_initial_index(i),sr) ) / &
317	cross_normx_factor(k,j)
318	uxma = MAXVAL( hom(:nz_do1d,1, &
319	dopr_initial_index(i),sr) ) / &
320	cross_normx_factor(k,j)
321	!
322	!-- When the value range of the first line in the
323	!-- corresponding cross is determined, its value range
324	!-- is simply adopted.
325	IF ( cross_uxmin_normalized_computed(j) > &
326	cross_uxmax_normalized_computed(j) ) THEN
327	cross_uxmin_normalized_computed(j) = uxmi
328	cross_uxmax_normalized_computed(j) = uxma
329	ELSE
330	cross_uxmin_normalized_computed(j) = &
331	MIN( cross_uxmin_normalized_computed(j), uxmi )
332	cross_uxmax_normalized_computed(j) = &
333	MAX( cross_uxmax_normalized_computed(j), uxma )
334	ENDIF
335
336	ENDDO
337
338	ENDIF
339
340	ENDIF ! Index determination
341
342	ENDIF ! profil output
343
344	ENDIF ! Initial profile available
345
346	ENDDO ! Loop over dopr_n for initial profiles
347
348	IF ( netcdf_output .AND. output_for_t0 ) THEN
349	dopr_time_count = dopr_time_count + 1
350	ENDIF
351
352	ENDIF ! Initial profiles
353
354	IF ( netcdf_output ) THEN
355	#if defined( __netcdf )
356	!
357	!-- Store time to time axis
358	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
359	(/ simulated_time /), &
360	start = (/ dopr_time_count /), &
361	count = (/ 1 /) )
362	CALL handle_netcdf_error( 'data_output_profiles', 338 )
363
364	!
365	!-- Store normalization factors
366	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
367	(/ hom_sum(nzb,18,normalizing_region) /), &
368	start = (/ dopr_time_count /), &
369	count = (/ 1 /) )
370	CALL handle_netcdf_error( 'data_output_profiles', 339 )
371
372	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
373	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
374	start = (/ dopr_time_count /), &
375	count = (/ 1 /) )
376	CALL handle_netcdf_error( 'data_output_profiles', 340 )
377
378	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
379	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
380	start = (/ dopr_time_count /), &
381	count = (/ 1 /) )
382	CALL handle_netcdf_error( 'data_output_profiles', 341 )
383
384	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
385	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
386	start = (/ dopr_time_count /), &
387	count = (/ 1 /) )
388	CALL handle_netcdf_error( 'data_output_profiles', 342 )
389
390	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
391	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
392	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
393	start = (/ dopr_time_count /), &
394	count = (/ 1 /) )
395	CALL handle_netcdf_error( 'data_output_profiles', 343 )
396
397	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
398	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
399	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
400	start = (/ dopr_time_count /), &
401	count = (/ 1 /) )
402	CALL handle_netcdf_error( 'data_output_profiles', 344 )
403
404	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
405	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
406	start = (/ dopr_time_count /), &
407	count = (/ 1 /) )
408	CALL handle_netcdf_error( 'data_output_profiles', 345 )
409	#endif
410	ENDIF
411
412	!
413	!-- Output of the individual (non-initial) profiles
414	DO i = 1, dopr_n
415
416	!
417	!-- Output for the individual (sub-)domains
418	DO sr = 0, statistic_regions
419
420	IF ( profil_output ) THEN
421	id = 40 + sr
422	!
423	!-- Write Label-Header
424	WRITE ( id, 100 ) TRIM( dopr_label(i) ), simulated_time_chr
425	!
426	!-- Output of total profile
427	DO k = nzb, nzt+1
428	WRITE ( id, 101 ) hom(k,2,dopr_index(i),sr), &
429	hom_sum(k,dopr_index(i),sr)
430	ENDDO
431	!
432	!-- Write separation label
433	WRITE ( id, 102 )
434	ENDIF
435
436	IF ( netcdf_output ) THEN
437	#if defined( __netcdf )
438	!
439	!-- Write data to netcdf file
440	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
441	hom_sum(nzb:nzt+1,dopr_index(i),sr),&
442	start = (/ 1, dopr_time_count /), &
443	count = (/ nzt-nzb+2, 1 /) )
444	CALL handle_netcdf_error( 'data_output_profiles', 346 )
445	#endif
446	ENDIF
447
448	ENDDO
449
450	IF ( profil_output ) THEN
451	!
452	!-- Determine profile number on file and note the data for later
453	!-- NAMELIST output, if the respective profile is to be drawn by
454	!-- PROFIL (if it shall not be drawn, the variable dopr_crossindex has
455	!-- the value 0, otherwise the number of the coordinate cross)
456	profile_number = profile_number + 1
457	j = dopr_crossindex(i)
458
459	IF ( j /= 0 ) THEN
460	cross_profile_number_count(j) = cross_profile_number_count(j) +1
461	k = cross_profile_number_count(j)
462	cross_pnc_local(j) = cross_pnc_local(j) +1
463	cross_profile_numbers(k,j) = profile_number
464	ilc = MOD( dopr_time_count, 10 )
465	IF ( ilc == 0 ) ilc = 10
466	cross_linecolors(k,j) = linecolors(ilc)
467	ils = MOD( cross_pnc_local(j), 11 )
468	IF ( ils == 0 ) ils = 11
469	cross_linestyles(k,j) = linestyles(ils)
470	!
471	!-- If required, extend x-value range of the respective coordinate
472	!-- cross, provided it has not been specified in check_parameters.
473	!-- Determination over all (sub-)regions.
474	IF ( cross_uxmin(j) == 0.0 .AND. cross_uxmax(j) == 0.0 ) THEN
475
476	DO sr = 0, statistic_regions
477
478	uxmi = MINVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
479	uxma = MAXVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
480	!
481	!-- When the value range of the first line in the
482	!-- corresponding cross is determined, its value range is
483	!-- simply adopted.
484	IF ( cross_uxmin_computed(j) > cross_uxmax_computed(j) ) &
485	THEN
486	cross_uxmin_computed(j) = uxmi
487	cross_uxmax_computed(j) = uxma
488	ELSE
489	cross_uxmin_computed(j) = &
490	MIN( cross_uxmin_computed(j), uxmi )
491	cross_uxmax_computed(j) = &
492	MAX( cross_uxmax_computed(j), uxma )
493	ENDIF
494
495	ENDDO
496
497	ENDIF
498	!
499	!-- If required, store the normalizing factors
500	SELECT CASE ( cross_normalized_x(j) )
501
502	CASE ( 'tsw2' )
503	cross_normx_factor(k,j) = &
504	( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
505	CASE ( 'wpt0' )
506	cross_normx_factor(k,j) = &
507	hom_sum(nzb,18,normalizing_region)
508	CASE ( 'wstsw2' )
509	cross_normx_factor(k,j) = &
510	hom_sum(nzb+8,pr_palm,normalizing_region) &
511	* ( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
512	CASE ( 'ws2' )
513	cross_normx_factor(k,j) = &
514	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
515	CASE ( 'ws2tsw' )
516	cross_normx_factor(k,j) = &
517	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2&
518	* hom_sum(nzb+11,pr_palm,normalizing_region)
519	CASE ( 'ws3' )
520	cross_normx_factor(k,j) = &
521	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
522
523	END SELECT
524	SELECT CASE ( cross_normalized_y(j) )
525
526	CASE ( 'z_i' )
527	cross_normy_factor(k,j) = &
528	hom_sum(nzb+6,pr_palm,normalizing_region)
529
530	END SELECT
531
532	!
533	!-- Check the normalizing factors for zeros and deactivate
534	!-- the normalization, if required.
535	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
536	cross_normy_factor(k,j) == 0.0 ) THEN
537	WRITE( message_string, * ) 'data_output_profiles: ', &
538	'normalizing cross ',j, ' is not possible ', &
539	'since one of the & normalizing factors ', &
540	'is zero! & cross_normx_factor(',k,',',j,') = ', &
541	cross_normx_factor(k,j), &
542	' & cross_normy_factor(',k,',',j,') = ', &
543	cross_normy_factor(k,j)
544	CALL message( 'data_output_profiles', 'PA0185',&
545	0, 1, 0, 6, 0 )
546	cross_normx_factor(k,j) = 1.0
547	cross_normy_factor(k,j) = 1.0
548	cross_normalized_x(j) = ' '
549	cross_normalized_y(j) = ' '
550	ENDIF
551
552	!
553	!-- If required, extend normalized x-value range of the respective
554	!-- cross, provided it has not been specified in check_parameters.
555	!-- Determination over all (sub-)regions.
556	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
557	cross_uxmax_normalized(j) == 0.0 ) THEN
558
559	DO sr = 0, statistic_regions
560
561	uxmi = MINVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
562	cross_normx_factor(k,j)
563	uxma = MAXVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
564	cross_normx_factor(k,j)
565	!
566	!-- When the value range of the first line in the
567	!-- corresponding cross is determined, its value range is
568	!-- simply adopted.
569	IF ( cross_uxmin_normalized_computed(j) > &
570	cross_uxmax_normalized_computed(j) ) THEN
571	cross_uxmin_normalized_computed(j) = uxmi
572	cross_uxmax_normalized_computed(j) = uxma
573	ELSE
574	cross_uxmin_normalized_computed(j) = &
575	MIN( cross_uxmin_normalized_computed(j), uxmi )
576	cross_uxmax_normalized_computed(j) = &
577	MAX( cross_uxmax_normalized_computed(j), uxma )
578	ENDIF
579
580	ENDDO
581
582	ENDIF
583
584	ENDIF ! Index determination
585
586	ENDIF ! profil output
587
588	ENDDO ! Loop over dopr_n
589
590	ENDIF ! Output on PE0
591
592	!
593	!-- If averaging has been done above, the summation counter must be re-set.
594	IF ( averaging_interval_pr /= 0.0 ) THEN
595	average_count_pr = 0
596	ENDIF
597
598	CALL cpu_log( log_point(15), 'data_output_profiles','stop', 'nobarrier' )
599
600	!
601	!-- Formats
602	100 FORMAT ('#1 ',A,1X,A)
603	101 FORMAT (E15.7,1X,E15.7)
604	102 FORMAT ('NEXT')
605
606	END SUBROUTINE data_output_profiles

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |