Home

Context Navigation

data_output_profiles.f90 @ 91

Last change on this file since 91 was 90, checked in by raasch, 17 years ago

New:
---
Calculation and output of user-defined profiles. New &userpar parameters data_output_pr_user and max_pr_user.

check_parameters, flow_statistics, modules, parin, read_var_list, user_interface, write_var_list

Changed:

Division through dt_3d replaced by multiplication of the inverse. For performance optimisation, this is done in the loop calculating the divergence instead of using a seperate loop. (pres.f90) var_hom and var_sum renamed pr_palm.

data_output_profiles, flow_statistics, init_3d_model, modules, parin, pres, read_var_list, run_control, time_integration

Errors:

Bugfix: work_fft*_vec removed from some PRIVATE-declarations (poisfft).

Bugfix: field_chr renamed field_char (user_interface).

Bugfix: output of use_upstream_for_tke (header).

header, poisfft, user_interface

Property svn:keywords set to Id

File size: 24.0 KB

Rev	Line
[1]	1	SUBROUTINE data_output_profiles
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[90]	6	!
[1]	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: data_output_profiles.f90 90 2007-05-30 09:18:47Z raasch $
	11	! RCS Log replace by Id keyword, revision history cleaned up
	12	!
[90]	13	! 87 2007-05-22 15:46:47Z raasch
	14	! var_hom renamed pr_palm
	15	!
[1]	16	! Revision 1.18 2006/08/16 14:27:04 raasch
	17	! PRINT* statements for testing removed
	18	!
	19	! Revision 1.1 1997/09/12 06:28:48 raasch
	20	! Initial revision
	21	!
	22	!
	23	! Description:
	24	! ------------
	25	! Plot output of 1D-profiles for PROFIL
	26	!------------------------------------------------------------------------------!
	27
	28	USE control_parameters
	29	USE cpulog
	30	USE indices
	31	USE interfaces
	32	USE netcdf_control
	33	USE pegrid
	34	USE profil_parameter
	35	USE statistics
	36
	37	IMPLICIT NONE
	38
	39
	40	INTEGER :: i, id, ilc, ils, j, k, sr
	41	REAL :: uxma, uxmi
	42
	43
	44	!
	45	!-- If required, compute statistics
	46	IF ( .NOT. flow_statistics_called ) CALL flow_statistics
	47
	48	!
	49	!-- Flow_statistics has its own CPU time measurement
	50	CALL cpu_log( log_point(15), 'data_output_profiles', 'start' )
	51
	52	!
	53	!-- If required, compute temporal average
	54	IF ( averaging_interval_pr == 0.0 ) THEN
	55	hom_sum(:,:,:) = hom(:,1,:,:)
	56	ELSE
	57	IF ( average_count_pr > 0 ) THEN
	58	hom_sum = hom_sum / REAL( average_count_pr )
	59	ELSE
	60	!
	61	!-- This case may happen if dt_dopr is changed in the d3par-list of
	62	!-- a restart run
	63	RETURN
	64	ENDIF
	65	ENDIF
	66
	67
	68	IF ( myid == 0 ) THEN
	69
	70	!
	71	!-- Plot-output for each (sub-)region
	72
	73	!
	74	!-- Open file for profile output in NetCDF format
	75	IF ( netcdf_output ) THEN
	76	CALL check_open( 104 )
	77	ENDIF
	78
	79	!
	80	!-- Open PROFIL-output files for each (sub-)region
	81	IF ( profil_output ) THEN
	82	DO sr = 0, statistic_regions
	83	CALL check_open( 40 + sr )
	84	ENDDO
	85	ENDIF
	86
	87	!
	88	!-- Increment the counter for number of output times
	89	dopr_time_count = dopr_time_count + 1
	90
	91	!
	92	!-- Re-set to zero the counter for the number of profiles already written
	93	!-- at the current output time into the respective crosses
	94	cross_pnc_local = 0
	95
	96	!
	97	!-- Output of initial profiles
	98	IF ( dopr_time_count == 1 ) THEN
	99
	100	IF ( netcdf_output ) THEN
	101	#if defined( __netcdf )
	102	!
	103	!-- Store initial time (t=0) to time axis
	104	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, (/ 0.0 /), &
	105	start = (/ 1 /), count = (/ 1 /) )
	106	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 329 )
	107
	108	!
	109	!-- Store normalization factors
	110	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
	111	(/ hom_sum(nzb,18,normalizing_region) /), &
	112	start = (/ 1 /), count = (/ 1 /) )
	113	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 330 )
	114
	115	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
[87]	116	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
[1]	117	start = (/ 1 /), count = (/ 1 /) )
	118	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 331 )
	119
	120	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
[87]	121	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	122	start = (/ 1 /), count = (/ 1 /) )
	123	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 332 )
	124
	125	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
[87]	126	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
[1]	127	start = (/ 1 /), count = (/ 1 /) )
	128	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 333 )
	129
	130	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
[87]	131	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
	132	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
[1]	133	start = (/ 1 /), count = (/ 1 /) )
	134	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 334 )
	135
	136	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
[87]	137	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
	138	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	139	start = (/ 1 /), count = (/ 1 /) )
	140	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 335 )
	141
	142	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
[87]	143	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
[1]	144	start = (/ 1 /), count = (/ 1 /) )
	145	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 336 )
	146	#endif
	147	ENDIF
	148	!
	149	!-- Loop over all 1D variables
	150	DO i = 1, dopr_n
	151
	152	IF ( dopr_initial_index(i) /= 0 ) THEN
	153
	154	!
	155	!-- Output for the individual (sub-)regions
	156	DO sr = 0, statistic_regions
	157
	158	IF ( profil_output ) THEN
	159	id = 40 + sr
	160	!
	161	!-- Write Label-Header
	162	WRITE ( id, 100 ) TRIM( data_output_pr(i) ), '(t=0)'
	163	!
	164	!-- Write total profile
	165	DO k = nzb, nzt+1
	166	WRITE ( id, 101 ) hom(k,2,dopr_initial_index(i),sr), &
	167	hom(k,1,dopr_initial_index(i),sr)
	168	ENDDO
	169	!
	170	!-- Write separation label
	171	WRITE ( id, 102 )
	172	ENDIF
	173
	174	IF ( netcdf_output ) THEN
	175	#if defined( __netcdf )
	176	!
	177	!-- Write data to netcdf file
	178	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
	179	hom(nzb:nzt+1,1,dopr_initial_index(i),sr), &
	180	start = (/ 1, 1 /), &
	181	count = (/ nzt-nzb+2, 1 /) )
	182	IF ( nc_stat /= NF90_NOERR ) &
	183	CALL handle_netcdf_error( 337 )
	184	#endif
	185	ENDIF
	186
	187	ENDDO
	188
	189	IF ( profil_output ) THEN
	190	!
	191	!-- Determine indices for later NAMELIST-output (s. below)
	192	profile_number = profile_number + 1
	193	j = dopr_crossindex(i)
	194	IF ( j /= 0 ) THEN
	195	cross_profile_number_count(j) = &
	196	cross_profile_number_count(j) + 1
	197	k = cross_profile_number_count(j)
	198	cross_profile_numbers(k,j) = profile_number
	199	!
	200	!-- Initial profiles are always drawn as solid lines in
	201	!-- anti-background colour.
	202	cross_linecolors(k,j) = 1
	203	cross_linestyles(k,j) = 0
	204	!
	205	!-- If required, extend x-value range of the respective
	206	!-- cross, provided it has not been specified in &
	207	!-- check_parameters. Determination over all (sub-)regions.
	208	IF ( cross_uxmin(j) == 0.0 .AND. &
	209	cross_uxmax(j) == 0.0 ) THEN
	210
	211	DO sr = 0, statistic_regions
	212
	213	uxmi = &
	214	MINVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
	215
	216	uxma = &
	217	MAXVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
	218	!
	219	!-- When the value range of the first line in the
	220	!-- corresponding cross is determined, its value range
	221	!-- is simply adopted.
	222	IF ( cross_uxmin_computed(j) > &
	223	cross_uxmax_computed(j) ) THEN
	224	cross_uxmin_computed(j) = uxmi
	225	cross_uxmax_computed(j) = uxma
	226	ELSE
	227	cross_uxmin_computed(j) = &
	228	MIN( cross_uxmin_computed(j), uxmi )
	229	cross_uxmax_computed(j) = &
	230	MAX( cross_uxmax_computed(j), uxma )
	231	ENDIF
	232
	233	ENDDO
	234
	235	ENDIF
	236	!
	237	!-- If required, determine and note normalizing factors
	238	SELECT CASE ( cross_normalized_x(j) )
	239
	240	CASE ( 'ts2' )
	241	cross_normx_factor(k,j) = &
[87]	242	( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
[1]	243	CASE ( 'wpt0' )
	244	cross_normx_factor(k,j) = &
	245	hom_sum(nzb,18,normalizing_region)
	246	CASE ( 'wsts2' )
	247	cross_normx_factor(k,j) = &
[87]	248	hom_sum(nzb+8,pr_palm,normalizing_region) &
	249	* ( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
[1]	250	CASE ( 'ws2' )
	251	cross_normx_factor(k,j) = &
[87]	252	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
[1]	253	CASE ( 'ws2ts' )
	254	cross_normx_factor(k,j) = &
[87]	255	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2 &
	256	* hom_sum(nzb+3,pr_palm,normalizing_region)
[1]	257	CASE ( 'ws3' )
	258	cross_normx_factor(k,j) = &
[87]	259	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
[1]	260
	261	END SELECT
	262
	263	SELECT CASE ( cross_normalized_y(j) )
	264
	265	CASE ( 'z_i' )
	266	cross_normy_factor(k,j) = &
[87]	267	hom_sum(nzb+6,pr_palm,normalizing_region)
[1]	268
	269	END SELECT
	270
	271	!
	272	!-- Check the normalizing factors for zeros and deactivate
	273	!-- the normalization, if required.
	274	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
	275	cross_normy_factor(k,j) == 0.0 ) THEN
	276	PRINT*,'+++ WARNING data_output_profiles: normalizi', &
	277	'ng cross ',j, ' is not possible since one o', &
	278	'f the'
	279	PRINT*,' normalizing factors is ',&
	280	'zero!'
	281	PRINT*,' cross_normx_factor(',k,',',j,') = ', &
	282	cross_normx_factor(k,j)
	283	PRINT*,' cross_normy_factor(',k,',',j,') = ', &
	284	cross_normy_factor(k,j)
	285	cross_normx_factor(k,j) = 1.0
	286	cross_normy_factor(k,j) = 1.0
	287	cross_normalized_x(j) = ' '
	288	cross_normalized_y(j) = ' '
	289	ENDIF
	290
	291	!
	292	!-- If required, extend normalized x-value range of the
	293	!-- respective cross, provided it has not been specified in
	294	!-- check_parameters. Determination over all (sub-)regions.
	295	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
	296	cross_uxmax_normalized(j) == 0.0 ) THEN
	297
	298	DO sr = 0, statistic_regions
	299
	300	uxmi = MINVAL( hom(:nz_do1d,1, &
	301	dopr_initial_index(i),sr) ) / &
	302	cross_normx_factor(k,j)
	303	uxma = MAXVAL( hom(:nz_do1d,1, &
	304	dopr_initial_index(i),sr) ) / &
	305	cross_normx_factor(k,j)
	306	!
	307	!-- When the value range of the first line in the
	308	!-- corresponding cross is determined, its value range
	309	!-- is simply adopted.
	310	IF ( cross_uxmin_normalized_computed(j) > &
	311	cross_uxmax_normalized_computed(j) ) THEN
	312	cross_uxmin_normalized_computed(j) = uxmi
	313	cross_uxmax_normalized_computed(j) = uxma
	314	ELSE
	315	cross_uxmin_normalized_computed(j) = &
	316	MIN( cross_uxmin_normalized_computed(j), uxmi )
	317	cross_uxmax_normalized_computed(j) = &
	318	MAX( cross_uxmax_normalized_computed(j), uxma )
	319	ENDIF
	320
	321	ENDDO
	322
	323	ENDIF
	324
	325	ENDIF ! Index determination
	326
	327	ENDIF ! profil output
	328
	329	ENDIF ! Initial profile available
	330
	331	ENDDO ! Loop over dopr_n for initial profiles
	332
	333	IF ( netcdf_output ) dopr_time_count = dopr_time_count + 1
	334
	335	ENDIF ! Initial profiles
	336
	337	IF ( netcdf_output ) THEN
	338	#if defined( __netcdf )
	339	!
	340	!-- Store time to time axis
	341	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
	342	(/ simulated_time /), &
	343	start = (/ dopr_time_count /), &
	344	count = (/ 1 /) )
	345	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 338 )
	346
	347	!
	348	!-- Store normalization factors
	349	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
	350	(/ hom_sum(nzb,18,normalizing_region) /), &
	351	start = (/ dopr_time_count /), &
	352	count = (/ 1 /) )
	353	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 339 )
	354
	355	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
[87]	356	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
[1]	357	start = (/ dopr_time_count /), &
	358	count = (/ 1 /) )
	359	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 340 )
	360
	361	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
[87]	362	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	363	start = (/ dopr_time_count /), &
	364	count = (/ 1 /) )
	365	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 341 )
	366
	367	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
[87]	368	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
[1]	369	start = (/ dopr_time_count /), &
	370	count = (/ 1 /) )
	371	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 342 )
	372
	373	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
[87]	374	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
	375	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
[1]	376	start = (/ dopr_time_count /), &
	377	count = (/ 1 /) )
	378	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 343 )
	379
	380	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
[87]	381	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
	382	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	383	start = (/ dopr_time_count /), &
	384	count = (/ 1 /) )
	385	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 344 )
	386
	387	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
[87]	388	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
[1]	389	start = (/ dopr_time_count /), &
	390	count = (/ 1 /) )
	391	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 345 )
	392	#endif
	393	ENDIF
	394
	395	!
	396	!-- Output of the individual (non-initial) profiles
	397	DO i = 1, dopr_n
	398
	399	!
	400	!-- Output for the individual (sub-)domains
	401	DO sr = 0, statistic_regions
	402
	403	IF ( profil_output ) THEN
	404	id = 40 + sr
	405	!
	406	!-- Write Label-Header
	407	WRITE ( id, 100 ) TRIM( dopr_label(i) ), simulated_time_chr
	408	!
	409	!-- Output of total profile
	410	DO k = nzb, nzt+1
	411	WRITE ( id, 101 ) hom(k,2,dopr_index(i),sr), &
	412	hom_sum(k,dopr_index(i),sr)
	413	ENDDO
	414	!
	415	!-- Write separation label
	416	WRITE ( id, 102 )
	417	ENDIF
	418
	419	IF ( netcdf_output ) THEN
	420	#if defined( __netcdf )
	421	!
	422	!-- Write data to netcdf file
	423	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
	424	hom_sum(nzb:nzt+1,dopr_index(i),sr),&
	425	start = (/ 1, dopr_time_count /), &
	426	count = (/ nzt-nzb+2, 1 /) )
	427	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 346 )
	428	#endif
	429	ENDIF
	430
	431	ENDDO
	432
	433	IF ( profil_output ) THEN
	434	!
	435	!-- Determine profile number on file and note the data for later
	436	!-- NAMELIST output, if the respective profile is to be drawn by
	437	!-- PROFIL (if it shall not be drawn, the variable dopr_crossindex has
	438	!-- the value 0, otherwise the number of the coordinate cross)
	439	profile_number = profile_number + 1
	440	j = dopr_crossindex(i)
	441
	442	IF ( j /= 0 ) THEN
	443	cross_profile_number_count(j) = cross_profile_number_count(j) +1
	444	k = cross_profile_number_count(j)
	445	cross_pnc_local(j) = cross_pnc_local(j) +1
	446	cross_profile_numbers(k,j) = profile_number
	447	ilc = MOD( dopr_time_count, 10 )
	448	IF ( ilc == 0 ) ilc = 10
	449	cross_linecolors(k,j) = linecolors(ilc)
	450	ils = MOD( cross_pnc_local(j), 11 )
	451	IF ( ils == 0 ) ils = 11
	452	cross_linestyles(k,j) = linestyles(ils)
	453	!
	454	!-- If required, extend x-value range of the respective coordinate
	455	!-- cross, provided it has not been specified in check_parameters.
	456	!-- Determination over all (sub-)regions.
	457	IF ( cross_uxmin(j) == 0.0 .AND. cross_uxmax(j) == 0.0 ) THEN
	458
	459	DO sr = 0, statistic_regions
	460
	461	uxmi = MINVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
	462	uxma = MAXVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
	463	!
	464	!-- When the value range of the first line in the
	465	!-- corresponding cross is determined, its value range is
	466	!-- simply adopted.
	467	IF ( cross_uxmin_computed(j) > cross_uxmax_computed(j) ) &
	468	THEN
	469	cross_uxmin_computed(j) = uxmi
	470	cross_uxmax_computed(j) = uxma
	471	ELSE
	472	cross_uxmin_computed(j) = &
	473	MIN( cross_uxmin_computed(j), uxmi )
	474	cross_uxmax_computed(j) = &
	475	MAX( cross_uxmax_computed(j), uxma )
	476	ENDIF
	477
	478	ENDDO
	479
	480	ENDIF
	481	!
	482	!-- If required, store the normalizing factors
	483	SELECT CASE ( cross_normalized_x(j) )
	484
	485	CASE ( 'tsw2' )
	486	cross_normx_factor(k,j) = &
[87]	487	( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
[1]	488	CASE ( 'wpt0' )
	489	cross_normx_factor(k,j) = &
	490	hom_sum(nzb,18,normalizing_region)
	491	CASE ( 'wstsw2' )
	492	cross_normx_factor(k,j) = &
[87]	493	hom_sum(nzb+8,pr_palm,normalizing_region) &
	494	* ( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
[1]	495	CASE ( 'ws2' )
	496	cross_normx_factor(k,j) = &
[87]	497	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
[1]	498	CASE ( 'ws2tsw' )
	499	cross_normx_factor(k,j) = &
[87]	500	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2&
	501	* hom_sum(nzb+11,pr_palm,normalizing_region)
[1]	502	CASE ( 'ws3' )
	503	cross_normx_factor(k,j) = &
[87]	504	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
[1]	505
	506	END SELECT
	507	SELECT CASE ( cross_normalized_y(j) )
	508
	509	CASE ( 'z_i' )
	510	cross_normy_factor(k,j) = &
[87]	511	hom_sum(nzb+6,pr_palm,normalizing_region)
[1]	512
	513	END SELECT
	514
	515	!
	516	!-- Check the normalizing factors for zeros and deactivate the
	517	!-- normalization, if required.
	518	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
	519	cross_normy_factor(k,j) == 0.0 ) THEN
	520	PRINT*,'+++ WARNING data_output_profiles: normalizing ',j, &
	521	' cross is not possible since one of the'
	522	PRINT*,' normalizing factors is zero!'
	523	PRINT*,' cross_normx_factor(',k,',',j,') = ', &
	524	cross_normx_factor(k,j)
	525	PRINT*,' cross_normy_factor(',k,',',j,') = ', &
	526	cross_normy_factor(k,j)
	527	cross_normx_factor(k,j) = 1.0
	528	cross_normy_factor(k,j) = 1.0
	529	cross_normalized_x(j) = ' '
	530	cross_normalized_y(j) = ' '
	531	ENDIF
	532
	533	!
	534	!-- If required, extend normalized x-value range of the respective
	535	!-- cross, provided it has not been specified in check_parameters.
	536	!-- Determination over all (sub-)regions.
	537	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
	538	cross_uxmax_normalized(j) == 0.0 ) THEN
	539
	540	DO sr = 0, statistic_regions
	541
	542	uxmi = MINVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
	543	cross_normx_factor(k,j)
	544	uxma = MAXVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
	545	cross_normx_factor(k,j)
	546	!
	547	!-- When the value range of the first line in the
	548	!-- corresponding cross is determined, its value range is
	549	!-- simply adopted.
	550	IF ( cross_uxmin_normalized_computed(j) > &
	551	cross_uxmax_normalized_computed(j) ) THEN
	552	cross_uxmin_normalized_computed(j) = uxmi
	553	cross_uxmax_normalized_computed(j) = uxma
	554	ELSE
	555	cross_uxmin_normalized_computed(j) = &
	556	MIN( cross_uxmin_normalized_computed(j), uxmi )
	557	cross_uxmax_normalized_computed(j) = &
	558	MAX( cross_uxmax_normalized_computed(j), uxma )
	559	ENDIF
	560
	561	ENDDO
	562
	563	ENDIF
	564
	565	ENDIF ! Index determination
	566
	567	ENDIF ! profil output
	568
	569	ENDDO ! Loop over dopr_n
	570
	571	ENDIF ! Output on PE0
	572
	573	!
	574	!-- If averaging has been done above, the summation counter must be re-set.
	575	IF ( averaging_interval_pr /= 0.0 ) THEN
	576	average_count_pr = 0
	577	ENDIF
	578
	579	CALL cpu_log( log_point(15), 'data_output_profiles','stop', 'nobarrier' )
	580
	581	!
	582	!-- Formats
	583	100 FORMAT ('#1 ',A,1X,A)
	584	101 FORMAT (E15.7,1X,E15.7)
	585	102 FORMAT ('NEXT')
	586
	587	END SUBROUTINE data_output_profiles

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/data_output_profiles.f90 @ 91

Download in other formats: