Home

Context Navigation

source: palm/trunk/SOURCE/data_output_profiles.f90 @ 255

Last change on this file since 255 was 254, checked in by heinze, 16 years ago
Output of messages replaced by message handling routine.
Property svn:keywords set to `Id`
File size: 25.0 KB

Rev	Line
[1]	1	SUBROUTINE data_output_profiles
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[254]	6	! Output of messages replaced by message handling routine.
[1]	7	!
[254]	8	!
[1]	9	! Former revisions:
	10	! -----------------
[3]	11	! $Id: data_output_profiles.f90 254 2009-03-05 15:33:42Z raasch $
[198]	12	!
	13	! 197 2008-09-16 15:29:03Z raasch
	14	! Time coordinate t=0 stored on netcdf-file only if an output is required for
	15	! this time for at least one of the profiles
	16	!
	17	! February 2007
[3]	18	! RCS Log replace by Id keyword, revision history cleaned up
	19	!
[90]	20	! 87 2007-05-22 15:46:47Z raasch
	21	! var_hom renamed pr_palm
	22	!
[1]	23	! Revision 1.18 2006/08/16 14:27:04 raasch
	24	! PRINT* statements for testing removed
	25	!
	26	! Revision 1.1 1997/09/12 06:28:48 raasch
	27	! Initial revision
	28	!
	29	!
	30	! Description:
	31	! ------------
	32	! Plot output of 1D-profiles for PROFIL
	33	!------------------------------------------------------------------------------!
	34
	35	USE control_parameters
	36	USE cpulog
	37	USE indices
	38	USE interfaces
	39	USE netcdf_control
	40	USE pegrid
	41	USE profil_parameter
	42	USE statistics
	43
	44	IMPLICIT NONE
	45
	46
	47	INTEGER :: i, id, ilc, ils, j, k, sr
[197]	48	LOGICAL :: output_for_t0
[1]	49	REAL :: uxma, uxmi
	50
	51
	52	!
	53	!-- If required, compute statistics
	54	IF ( .NOT. flow_statistics_called ) CALL flow_statistics
	55
	56	!
	57	!-- Flow_statistics has its own CPU time measurement
	58	CALL cpu_log( log_point(15), 'data_output_profiles', 'start' )
	59
	60	!
	61	!-- If required, compute temporal average
	62	IF ( averaging_interval_pr == 0.0 ) THEN
	63	hom_sum(:,:,:) = hom(:,1,:,:)
	64	ELSE
	65	IF ( average_count_pr > 0 ) THEN
	66	hom_sum = hom_sum / REAL( average_count_pr )
	67	ELSE
	68	!
	69	!-- This case may happen if dt_dopr is changed in the d3par-list of
	70	!-- a restart run
	71	RETURN
	72	ENDIF
	73	ENDIF
	74
	75
	76	IF ( myid == 0 ) THEN
	77
	78	!
	79	!-- Plot-output for each (sub-)region
	80
	81	!
	82	!-- Open file for profile output in NetCDF format
	83	IF ( netcdf_output ) THEN
	84	CALL check_open( 104 )
	85	ENDIF
	86
	87	!
	88	!-- Open PROFIL-output files for each (sub-)region
	89	IF ( profil_output ) THEN
	90	DO sr = 0, statistic_regions
	91	CALL check_open( 40 + sr )
	92	ENDDO
	93	ENDIF
	94
	95	!
	96	!-- Increment the counter for number of output times
	97	dopr_time_count = dopr_time_count + 1
	98
	99	!
	100	!-- Re-set to zero the counter for the number of profiles already written
	101	!-- at the current output time into the respective crosses
	102	cross_pnc_local = 0
	103
	104	!
	105	!-- Output of initial profiles
	106	IF ( dopr_time_count == 1 ) THEN
	107
	108	IF ( netcdf_output ) THEN
	109	#if defined( __netcdf )
	110	!
[197]	111	!-- Store initial time (t=0) to time axis, but only if an output
	112	!-- is required for at least one of the profiles
	113	output_for_t0 = .FALSE.
	114	DO i = 1, dopr_n
	115	IF ( dopr_initial_index(i) /= 0 ) THEN
	116	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
	117	(/ 0.0 /), start = (/ 1 /), &
	118	count = (/ 1 /) )
	119	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 329 )
	120	output_for_t0 = .TRUE.
	121	EXIT
	122	ENDIF
	123	ENDDO
[1]	124
	125	!
	126	!-- Store normalization factors
	127	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
	128	(/ hom_sum(nzb,18,normalizing_region) /), &
	129	start = (/ 1 /), count = (/ 1 /) )
	130	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 330 )
	131
	132	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
[87]	133	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
[1]	134	start = (/ 1 /), count = (/ 1 /) )
	135	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 331 )
	136
	137	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
[87]	138	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	139	start = (/ 1 /), count = (/ 1 /) )
	140	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 332 )
	141
	142	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
[87]	143	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
[1]	144	start = (/ 1 /), count = (/ 1 /) )
	145	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 333 )
	146
	147	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
[87]	148	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
	149	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
[1]	150	start = (/ 1 /), count = (/ 1 /) )
	151	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 334 )
	152
	153	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
[87]	154	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
	155	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	156	start = (/ 1 /), count = (/ 1 /) )
	157	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 335 )
	158
	159	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
[87]	160	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
[1]	161	start = (/ 1 /), count = (/ 1 /) )
	162	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 336 )
	163	#endif
	164	ENDIF
	165	!
	166	!-- Loop over all 1D variables
	167	DO i = 1, dopr_n
	168
	169	IF ( dopr_initial_index(i) /= 0 ) THEN
	170
	171	!
	172	!-- Output for the individual (sub-)regions
	173	DO sr = 0, statistic_regions
	174
	175	IF ( profil_output ) THEN
	176	id = 40 + sr
	177	!
	178	!-- Write Label-Header
	179	WRITE ( id, 100 ) TRIM( data_output_pr(i) ), '(t=0)'
	180	!
	181	!-- Write total profile
	182	DO k = nzb, nzt+1
	183	WRITE ( id, 101 ) hom(k,2,dopr_initial_index(i),sr), &
	184	hom(k,1,dopr_initial_index(i),sr)
	185	ENDDO
	186	!
	187	!-- Write separation label
	188	WRITE ( id, 102 )
	189	ENDIF
	190
	191	IF ( netcdf_output ) THEN
	192	#if defined( __netcdf )
	193	!
	194	!-- Write data to netcdf file
	195	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
	196	hom(nzb:nzt+1,1,dopr_initial_index(i),sr), &
	197	start = (/ 1, 1 /), &
	198	count = (/ nzt-nzb+2, 1 /) )
	199	IF ( nc_stat /= NF90_NOERR ) &
	200	CALL handle_netcdf_error( 337 )
	201	#endif
	202	ENDIF
	203
	204	ENDDO
	205
	206	IF ( profil_output ) THEN
	207	!
	208	!-- Determine indices for later NAMELIST-output (s. below)
	209	profile_number = profile_number + 1
	210	j = dopr_crossindex(i)
	211	IF ( j /= 0 ) THEN
	212	cross_profile_number_count(j) = &
	213	cross_profile_number_count(j) + 1
	214	k = cross_profile_number_count(j)
	215	cross_profile_numbers(k,j) = profile_number
	216	!
	217	!-- Initial profiles are always drawn as solid lines in
	218	!-- anti-background colour.
	219	cross_linecolors(k,j) = 1
	220	cross_linestyles(k,j) = 0
	221	!
	222	!-- If required, extend x-value range of the respective
	223	!-- cross, provided it has not been specified in &
	224	!-- check_parameters. Determination over all (sub-)regions.
	225	IF ( cross_uxmin(j) == 0.0 .AND. &
	226	cross_uxmax(j) == 0.0 ) THEN
	227
	228	DO sr = 0, statistic_regions
	229
	230	uxmi = &
	231	MINVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
	232
	233	uxma = &
	234	MAXVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
	235	!
	236	!-- When the value range of the first line in the
	237	!-- corresponding cross is determined, its value range
	238	!-- is simply adopted.
	239	IF ( cross_uxmin_computed(j) > &
	240	cross_uxmax_computed(j) ) THEN
	241	cross_uxmin_computed(j) = uxmi
	242	cross_uxmax_computed(j) = uxma
	243	ELSE
	244	cross_uxmin_computed(j) = &
	245	MIN( cross_uxmin_computed(j), uxmi )
	246	cross_uxmax_computed(j) = &
	247	MAX( cross_uxmax_computed(j), uxma )
	248	ENDIF
	249
	250	ENDDO
	251
	252	ENDIF
	253	!
	254	!-- If required, determine and note normalizing factors
	255	SELECT CASE ( cross_normalized_x(j) )
	256
	257	CASE ( 'ts2' )
	258	cross_normx_factor(k,j) = &
[87]	259	( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
[1]	260	CASE ( 'wpt0' )
	261	cross_normx_factor(k,j) = &
	262	hom_sum(nzb,18,normalizing_region)
	263	CASE ( 'wsts2' )
	264	cross_normx_factor(k,j) = &
[87]	265	hom_sum(nzb+8,pr_palm,normalizing_region) &
	266	* ( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
[1]	267	CASE ( 'ws2' )
	268	cross_normx_factor(k,j) = &
[87]	269	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
[1]	270	CASE ( 'ws2ts' )
	271	cross_normx_factor(k,j) = &
[87]	272	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2 &
	273	* hom_sum(nzb+3,pr_palm,normalizing_region)
[1]	274	CASE ( 'ws3' )
	275	cross_normx_factor(k,j) = &
[87]	276	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
[1]	277
	278	END SELECT
	279
	280	SELECT CASE ( cross_normalized_y(j) )
	281
	282	CASE ( 'z_i' )
	283	cross_normy_factor(k,j) = &
[87]	284	hom_sum(nzb+6,pr_palm,normalizing_region)
[1]	285
	286	END SELECT
	287
	288	!
	289	!-- Check the normalizing factors for zeros and deactivate
	290	!-- the normalization, if required.
	291	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
	292	cross_normy_factor(k,j) == 0.0 ) THEN
[254]	293	WRITE( message_string, * ) 'data_output_profiles: normalizi', &
	294	'ng cross ',j, ' is not possible since one o', &
	295	'f the & normalizing factors is zero! & ', &
	296	'cross_normx_factor(',k,',',j,') = ', &
	297	cross_normx_factor(k,j), &
	298	' & cross_normy_factor(',k,',',j,') = ', &
	299	cross_normy_factor(k,j)
	300	CALL message( 'data_output_profiles', 'PA0185', 0, 1, 0, 6, 0 )
[1]	301	cross_normx_factor(k,j) = 1.0
	302	cross_normy_factor(k,j) = 1.0
	303	cross_normalized_x(j) = ' '
	304	cross_normalized_y(j) = ' '
	305	ENDIF
	306
	307	!
	308	!-- If required, extend normalized x-value range of the
	309	!-- respective cross, provided it has not been specified in
	310	!-- check_parameters. Determination over all (sub-)regions.
	311	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
	312	cross_uxmax_normalized(j) == 0.0 ) THEN
	313
	314	DO sr = 0, statistic_regions
	315
	316	uxmi = MINVAL( hom(:nz_do1d,1, &
	317	dopr_initial_index(i),sr) ) / &
	318	cross_normx_factor(k,j)
	319	uxma = MAXVAL( hom(:nz_do1d,1, &
	320	dopr_initial_index(i),sr) ) / &
	321	cross_normx_factor(k,j)
	322	!
	323	!-- When the value range of the first line in the
	324	!-- corresponding cross is determined, its value range
	325	!-- is simply adopted.
	326	IF ( cross_uxmin_normalized_computed(j) > &
	327	cross_uxmax_normalized_computed(j) ) THEN
	328	cross_uxmin_normalized_computed(j) = uxmi
	329	cross_uxmax_normalized_computed(j) = uxma
	330	ELSE
	331	cross_uxmin_normalized_computed(j) = &
	332	MIN( cross_uxmin_normalized_computed(j), uxmi )
	333	cross_uxmax_normalized_computed(j) = &
	334	MAX( cross_uxmax_normalized_computed(j), uxma )
	335	ENDIF
	336
	337	ENDDO
	338
	339	ENDIF
	340
	341	ENDIF ! Index determination
	342
	343	ENDIF ! profil output
	344
	345	ENDIF ! Initial profile available
	346
	347	ENDDO ! Loop over dopr_n for initial profiles
	348
[197]	349	IF ( netcdf_output .AND. output_for_t0 ) THEN
	350	dopr_time_count = dopr_time_count + 1
	351	ENDIF
[1]	352
	353	ENDIF ! Initial profiles
	354
	355	IF ( netcdf_output ) THEN
	356	#if defined( __netcdf )
	357	!
	358	!-- Store time to time axis
	359	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
	360	(/ simulated_time /), &
	361	start = (/ dopr_time_count /), &
	362	count = (/ 1 /) )
	363	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 338 )
	364
	365	!
	366	!-- Store normalization factors
	367	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
	368	(/ hom_sum(nzb,18,normalizing_region) /), &
	369	start = (/ dopr_time_count /), &
	370	count = (/ 1 /) )
	371	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 339 )
	372
	373	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
[87]	374	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
[1]	375	start = (/ dopr_time_count /), &
	376	count = (/ 1 /) )
	377	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 340 )
	378
	379	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
[87]	380	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	381	start = (/ dopr_time_count /), &
	382	count = (/ 1 /) )
	383	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 341 )
	384
	385	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
[87]	386	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
[1]	387	start = (/ dopr_time_count /), &
	388	count = (/ 1 /) )
	389	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 342 )
	390
	391	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
[87]	392	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
	393	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
[1]	394	start = (/ dopr_time_count /), &
	395	count = (/ 1 /) )
	396	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 343 )
	397
	398	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
[87]	399	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
	400	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	401	start = (/ dopr_time_count /), &
	402	count = (/ 1 /) )
	403	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 344 )
	404
	405	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
[87]	406	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
[1]	407	start = (/ dopr_time_count /), &
	408	count = (/ 1 /) )
	409	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 345 )
	410	#endif
	411	ENDIF
	412
	413	!
	414	!-- Output of the individual (non-initial) profiles
	415	DO i = 1, dopr_n
	416
	417	!
	418	!-- Output for the individual (sub-)domains
	419	DO sr = 0, statistic_regions
	420
	421	IF ( profil_output ) THEN
	422	id = 40 + sr
	423	!
	424	!-- Write Label-Header
	425	WRITE ( id, 100 ) TRIM( dopr_label(i) ), simulated_time_chr
	426	!
	427	!-- Output of total profile
	428	DO k = nzb, nzt+1
	429	WRITE ( id, 101 ) hom(k,2,dopr_index(i),sr), &
	430	hom_sum(k,dopr_index(i),sr)
	431	ENDDO
	432	!
	433	!-- Write separation label
	434	WRITE ( id, 102 )
	435	ENDIF
	436
	437	IF ( netcdf_output ) THEN
	438	#if defined( __netcdf )
	439	!
	440	!-- Write data to netcdf file
	441	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
	442	hom_sum(nzb:nzt+1,dopr_index(i),sr),&
	443	start = (/ 1, dopr_time_count /), &
	444	count = (/ nzt-nzb+2, 1 /) )
	445	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 346 )
	446	#endif
	447	ENDIF
	448
	449	ENDDO
	450
	451	IF ( profil_output ) THEN
	452	!
	453	!-- Determine profile number on file and note the data for later
	454	!-- NAMELIST output, if the respective profile is to be drawn by
	455	!-- PROFIL (if it shall not be drawn, the variable dopr_crossindex has
	456	!-- the value 0, otherwise the number of the coordinate cross)
	457	profile_number = profile_number + 1
	458	j = dopr_crossindex(i)
	459
	460	IF ( j /= 0 ) THEN
	461	cross_profile_number_count(j) = cross_profile_number_count(j) +1
	462	k = cross_profile_number_count(j)
	463	cross_pnc_local(j) = cross_pnc_local(j) +1
	464	cross_profile_numbers(k,j) = profile_number
	465	ilc = MOD( dopr_time_count, 10 )
	466	IF ( ilc == 0 ) ilc = 10
	467	cross_linecolors(k,j) = linecolors(ilc)
	468	ils = MOD( cross_pnc_local(j), 11 )
	469	IF ( ils == 0 ) ils = 11
	470	cross_linestyles(k,j) = linestyles(ils)
	471	!
	472	!-- If required, extend x-value range of the respective coordinate
	473	!-- cross, provided it has not been specified in check_parameters.
	474	!-- Determination over all (sub-)regions.
	475	IF ( cross_uxmin(j) == 0.0 .AND. cross_uxmax(j) == 0.0 ) THEN
	476
	477	DO sr = 0, statistic_regions
	478
	479	uxmi = MINVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
	480	uxma = MAXVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
	481	!
	482	!-- When the value range of the first line in the
	483	!-- corresponding cross is determined, its value range is
	484	!-- simply adopted.
	485	IF ( cross_uxmin_computed(j) > cross_uxmax_computed(j) ) &
	486	THEN
	487	cross_uxmin_computed(j) = uxmi
	488	cross_uxmax_computed(j) = uxma
	489	ELSE
	490	cross_uxmin_computed(j) = &
	491	MIN( cross_uxmin_computed(j), uxmi )
	492	cross_uxmax_computed(j) = &
	493	MAX( cross_uxmax_computed(j), uxma )
	494	ENDIF
	495
	496	ENDDO
	497
	498	ENDIF
	499	!
	500	!-- If required, store the normalizing factors
	501	SELECT CASE ( cross_normalized_x(j) )
	502
	503	CASE ( 'tsw2' )
	504	cross_normx_factor(k,j) = &
[87]	505	( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
[1]	506	CASE ( 'wpt0' )
	507	cross_normx_factor(k,j) = &
	508	hom_sum(nzb,18,normalizing_region)
	509	CASE ( 'wstsw2' )
	510	cross_normx_factor(k,j) = &
[87]	511	hom_sum(nzb+8,pr_palm,normalizing_region) &
	512	* ( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
[1]	513	CASE ( 'ws2' )
	514	cross_normx_factor(k,j) = &
[87]	515	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
[1]	516	CASE ( 'ws2tsw' )
	517	cross_normx_factor(k,j) = &
[87]	518	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2&
	519	* hom_sum(nzb+11,pr_palm,normalizing_region)
[1]	520	CASE ( 'ws3' )
	521	cross_normx_factor(k,j) = &
[87]	522	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
[1]	523
	524	END SELECT
	525	SELECT CASE ( cross_normalized_y(j) )
	526
	527	CASE ( 'z_i' )
	528	cross_normy_factor(k,j) = &
[87]	529	hom_sum(nzb+6,pr_palm,normalizing_region)
[1]	530
	531	END SELECT
	532
	533	!
[254]	534	!-- Check the normalizing factors for zeros and deactivate
	535	!-- the normalization, if required.
[1]	536	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
	537	cross_normy_factor(k,j) == 0.0 ) THEN
[254]	538	WRITE( message_string, * ) 'data_output_profiles: normalizi', &
	539	'ng cross ',j, ' is not possible since one o', &
	540	'f the & normalizing factors is zero! & ', &
	541	'cross_normx_factor(',k,',',j,') = ', &
	542	cross_normx_factor(k,j), &
	543	' & cross_normy_factor(',k,',',j,') = ', &
	544	cross_normy_factor(k,j)
	545	CALL message( 'data_output_profiles', 'PA0185', 0, 1, 0, 6, 0 )
	546	cross_normx_factor(k,j) = 1.0
	547	cross_normy_factor(k,j) = 1.0
	548	cross_normalized_x(j) = ' '
	549	cross_normalized_y(j) = ' '
[1]	550	ENDIF
	551
	552	!
	553	!-- If required, extend normalized x-value range of the respective
	554	!-- cross, provided it has not been specified in check_parameters.
	555	!-- Determination over all (sub-)regions.
	556	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
	557	cross_uxmax_normalized(j) == 0.0 ) THEN
	558
	559	DO sr = 0, statistic_regions
	560
	561	uxmi = MINVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
	562	cross_normx_factor(k,j)
	563	uxma = MAXVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
	564	cross_normx_factor(k,j)
	565	!
	566	!-- When the value range of the first line in the
	567	!-- corresponding cross is determined, its value range is
	568	!-- simply adopted.
	569	IF ( cross_uxmin_normalized_computed(j) > &
	570	cross_uxmax_normalized_computed(j) ) THEN
	571	cross_uxmin_normalized_computed(j) = uxmi
	572	cross_uxmax_normalized_computed(j) = uxma
	573	ELSE
	574	cross_uxmin_normalized_computed(j) = &
	575	MIN( cross_uxmin_normalized_computed(j), uxmi )
	576	cross_uxmax_normalized_computed(j) = &
	577	MAX( cross_uxmax_normalized_computed(j), uxma )
	578	ENDIF
	579
	580	ENDDO
	581
	582	ENDIF
	583
	584	ENDIF ! Index determination
	585
	586	ENDIF ! profil output
	587
	588	ENDDO ! Loop over dopr_n
	589
	590	ENDIF ! Output on PE0
	591
	592	!
	593	!-- If averaging has been done above, the summation counter must be re-set.
	594	IF ( averaging_interval_pr /= 0.0 ) THEN
	595	average_count_pr = 0
	596	ENDIF
	597
	598	CALL cpu_log( log_point(15), 'data_output_profiles','stop', 'nobarrier' )
	599
	600	!
	601	!-- Formats
	602	100 FORMAT ('#1 ',A,1X,A)
	603	101 FORMAT (E15.7,1X,E15.7)
	604	102 FORMAT ('NEXT')
	605
	606	END SUBROUTINE data_output_profiles

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |