Home

Context Navigation

source: palm/trunk/SOURCE/data_output_profiles.f90 @ 236

Last change on this file since 236 was 198, checked in by raasch, 16 years ago
file headers updated for the next release 3.5
Property svn:keywords set to `Id`
File size: 24.6 KB

Rev	Line
[1]	1	SUBROUTINE data_output_profiles
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[198]	6	!
[1]	7	!
	8	! Former revisions:
	9	! -----------------
[3]	10	! $Id: data_output_profiles.f90 198 2008-09-17 08:55:28Z letzel $
[198]	11	!
	12	! 197 2008-09-16 15:29:03Z raasch
	13	! Time coordinate t=0 stored on netcdf-file only if an output is required for
	14	! this time for at least one of the profiles
	15	!
	16	! February 2007
[3]	17	! RCS Log replace by Id keyword, revision history cleaned up
	18	!
[90]	19	! 87 2007-05-22 15:46:47Z raasch
	20	! var_hom renamed pr_palm
	21	!
[1]	22	! Revision 1.18 2006/08/16 14:27:04 raasch
	23	! PRINT* statements for testing removed
	24	!
	25	! Revision 1.1 1997/09/12 06:28:48 raasch
	26	! Initial revision
	27	!
	28	!
	29	! Description:
	30	! ------------
	31	! Plot output of 1D-profiles for PROFIL
	32	!------------------------------------------------------------------------------!
	33
	34	USE control_parameters
	35	USE cpulog
	36	USE indices
	37	USE interfaces
	38	USE netcdf_control
	39	USE pegrid
	40	USE profil_parameter
	41	USE statistics
	42
	43	IMPLICIT NONE
	44
	45
	46	INTEGER :: i, id, ilc, ils, j, k, sr
[197]	47	LOGICAL :: output_for_t0
[1]	48	REAL :: uxma, uxmi
	49
	50
	51	!
	52	!-- If required, compute statistics
	53	IF ( .NOT. flow_statistics_called ) CALL flow_statistics
	54
	55	!
	56	!-- Flow_statistics has its own CPU time measurement
	57	CALL cpu_log( log_point(15), 'data_output_profiles', 'start' )
	58
	59	!
	60	!-- If required, compute temporal average
	61	IF ( averaging_interval_pr == 0.0 ) THEN
	62	hom_sum(:,:,:) = hom(:,1,:,:)
	63	ELSE
	64	IF ( average_count_pr > 0 ) THEN
	65	hom_sum = hom_sum / REAL( average_count_pr )
	66	ELSE
	67	!
	68	!-- This case may happen if dt_dopr is changed in the d3par-list of
	69	!-- a restart run
	70	RETURN
	71	ENDIF
	72	ENDIF
	73
	74
	75	IF ( myid == 0 ) THEN
	76
	77	!
	78	!-- Plot-output for each (sub-)region
	79
	80	!
	81	!-- Open file for profile output in NetCDF format
	82	IF ( netcdf_output ) THEN
	83	CALL check_open( 104 )
	84	ENDIF
	85
	86	!
	87	!-- Open PROFIL-output files for each (sub-)region
	88	IF ( profil_output ) THEN
	89	DO sr = 0, statistic_regions
	90	CALL check_open( 40 + sr )
	91	ENDDO
	92	ENDIF
	93
	94	!
	95	!-- Increment the counter for number of output times
	96	dopr_time_count = dopr_time_count + 1
	97
	98	!
	99	!-- Re-set to zero the counter for the number of profiles already written
	100	!-- at the current output time into the respective crosses
	101	cross_pnc_local = 0
	102
	103	!
	104	!-- Output of initial profiles
	105	IF ( dopr_time_count == 1 ) THEN
	106
	107	IF ( netcdf_output ) THEN
	108	#if defined( __netcdf )
	109	!
[197]	110	!-- Store initial time (t=0) to time axis, but only if an output
	111	!-- is required for at least one of the profiles
	112	output_for_t0 = .FALSE.
	113	DO i = 1, dopr_n
	114	IF ( dopr_initial_index(i) /= 0 ) THEN
	115	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
	116	(/ 0.0 /), start = (/ 1 /), &
	117	count = (/ 1 /) )
	118	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 329 )
	119	output_for_t0 = .TRUE.
	120	EXIT
	121	ENDIF
	122	ENDDO
[1]	123
	124	!
	125	!-- Store normalization factors
	126	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
	127	(/ hom_sum(nzb,18,normalizing_region) /), &
	128	start = (/ 1 /), count = (/ 1 /) )
	129	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 330 )
	130
	131	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
[87]	132	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
[1]	133	start = (/ 1 /), count = (/ 1 /) )
	134	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 331 )
	135
	136	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
[87]	137	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	138	start = (/ 1 /), count = (/ 1 /) )
	139	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 332 )
	140
	141	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
[87]	142	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
[1]	143	start = (/ 1 /), count = (/ 1 /) )
	144	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 333 )
	145
	146	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
[87]	147	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
	148	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
[1]	149	start = (/ 1 /), count = (/ 1 /) )
	150	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 334 )
	151
	152	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
[87]	153	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
	154	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	155	start = (/ 1 /), count = (/ 1 /) )
	156	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 335 )
	157
	158	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
[87]	159	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
[1]	160	start = (/ 1 /), count = (/ 1 /) )
	161	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 336 )
	162	#endif
	163	ENDIF
	164	!
	165	!-- Loop over all 1D variables
	166	DO i = 1, dopr_n
	167
	168	IF ( dopr_initial_index(i) /= 0 ) THEN
	169
	170	!
	171	!-- Output for the individual (sub-)regions
	172	DO sr = 0, statistic_regions
	173
	174	IF ( profil_output ) THEN
	175	id = 40 + sr
	176	!
	177	!-- Write Label-Header
	178	WRITE ( id, 100 ) TRIM( data_output_pr(i) ), '(t=0)'
	179	!
	180	!-- Write total profile
	181	DO k = nzb, nzt+1
	182	WRITE ( id, 101 ) hom(k,2,dopr_initial_index(i),sr), &
	183	hom(k,1,dopr_initial_index(i),sr)
	184	ENDDO
	185	!
	186	!-- Write separation label
	187	WRITE ( id, 102 )
	188	ENDIF
	189
	190	IF ( netcdf_output ) THEN
	191	#if defined( __netcdf )
	192	!
	193	!-- Write data to netcdf file
	194	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
	195	hom(nzb:nzt+1,1,dopr_initial_index(i),sr), &
	196	start = (/ 1, 1 /), &
	197	count = (/ nzt-nzb+2, 1 /) )
	198	IF ( nc_stat /= NF90_NOERR ) &
	199	CALL handle_netcdf_error( 337 )
	200	#endif
	201	ENDIF
	202
	203	ENDDO
	204
	205	IF ( profil_output ) THEN
	206	!
	207	!-- Determine indices for later NAMELIST-output (s. below)
	208	profile_number = profile_number + 1
	209	j = dopr_crossindex(i)
	210	IF ( j /= 0 ) THEN
	211	cross_profile_number_count(j) = &
	212	cross_profile_number_count(j) + 1
	213	k = cross_profile_number_count(j)
	214	cross_profile_numbers(k,j) = profile_number
	215	!
	216	!-- Initial profiles are always drawn as solid lines in
	217	!-- anti-background colour.
	218	cross_linecolors(k,j) = 1
	219	cross_linestyles(k,j) = 0
	220	!
	221	!-- If required, extend x-value range of the respective
	222	!-- cross, provided it has not been specified in &
	223	!-- check_parameters. Determination over all (sub-)regions.
	224	IF ( cross_uxmin(j) == 0.0 .AND. &
	225	cross_uxmax(j) == 0.0 ) THEN
	226
	227	DO sr = 0, statistic_regions
	228
	229	uxmi = &
	230	MINVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
	231
	232	uxma = &
	233	MAXVAL( hom(:nz_do1d,1,dopr_initial_index(i),sr) )
	234	!
	235	!-- When the value range of the first line in the
	236	!-- corresponding cross is determined, its value range
	237	!-- is simply adopted.
	238	IF ( cross_uxmin_computed(j) > &
	239	cross_uxmax_computed(j) ) THEN
	240	cross_uxmin_computed(j) = uxmi
	241	cross_uxmax_computed(j) = uxma
	242	ELSE
	243	cross_uxmin_computed(j) = &
	244	MIN( cross_uxmin_computed(j), uxmi )
	245	cross_uxmax_computed(j) = &
	246	MAX( cross_uxmax_computed(j), uxma )
	247	ENDIF
	248
	249	ENDDO
	250
	251	ENDIF
	252	!
	253	!-- If required, determine and note normalizing factors
	254	SELECT CASE ( cross_normalized_x(j) )
	255
	256	CASE ( 'ts2' )
	257	cross_normx_factor(k,j) = &
[87]	258	( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
[1]	259	CASE ( 'wpt0' )
	260	cross_normx_factor(k,j) = &
	261	hom_sum(nzb,18,normalizing_region)
	262	CASE ( 'wsts2' )
	263	cross_normx_factor(k,j) = &
[87]	264	hom_sum(nzb+8,pr_palm,normalizing_region) &
	265	* ( hom_sum(nzb+3,pr_palm,normalizing_region) )**2
[1]	266	CASE ( 'ws2' )
	267	cross_normx_factor(k,j) = &
[87]	268	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
[1]	269	CASE ( 'ws2ts' )
	270	cross_normx_factor(k,j) = &
[87]	271	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2 &
	272	* hom_sum(nzb+3,pr_palm,normalizing_region)
[1]	273	CASE ( 'ws3' )
	274	cross_normx_factor(k,j) = &
[87]	275	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
[1]	276
	277	END SELECT
	278
	279	SELECT CASE ( cross_normalized_y(j) )
	280
	281	CASE ( 'z_i' )
	282	cross_normy_factor(k,j) = &
[87]	283	hom_sum(nzb+6,pr_palm,normalizing_region)
[1]	284
	285	END SELECT
	286
	287	!
	288	!-- Check the normalizing factors for zeros and deactivate
	289	!-- the normalization, if required.
	290	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
	291	cross_normy_factor(k,j) == 0.0 ) THEN
	292	PRINT*,'+++ WARNING data_output_profiles: normalizi', &
	293	'ng cross ',j, ' is not possible since one o', &
	294	'f the'
	295	PRINT*,' normalizing factors is ',&
	296	'zero!'
	297	PRINT*,' cross_normx_factor(',k,',',j,') = ', &
	298	cross_normx_factor(k,j)
	299	PRINT*,' cross_normy_factor(',k,',',j,') = ', &
	300	cross_normy_factor(k,j)
	301	cross_normx_factor(k,j) = 1.0
	302	cross_normy_factor(k,j) = 1.0
	303	cross_normalized_x(j) = ' '
	304	cross_normalized_y(j) = ' '
	305	ENDIF
	306
	307	!
	308	!-- If required, extend normalized x-value range of the
	309	!-- respective cross, provided it has not been specified in
	310	!-- check_parameters. Determination over all (sub-)regions.
	311	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
	312	cross_uxmax_normalized(j) == 0.0 ) THEN
	313
	314	DO sr = 0, statistic_regions
	315
	316	uxmi = MINVAL( hom(:nz_do1d,1, &
	317	dopr_initial_index(i),sr) ) / &
	318	cross_normx_factor(k,j)
	319	uxma = MAXVAL( hom(:nz_do1d,1, &
	320	dopr_initial_index(i),sr) ) / &
	321	cross_normx_factor(k,j)
	322	!
	323	!-- When the value range of the first line in the
	324	!-- corresponding cross is determined, its value range
	325	!-- is simply adopted.
	326	IF ( cross_uxmin_normalized_computed(j) > &
	327	cross_uxmax_normalized_computed(j) ) THEN
	328	cross_uxmin_normalized_computed(j) = uxmi
	329	cross_uxmax_normalized_computed(j) = uxma
	330	ELSE
	331	cross_uxmin_normalized_computed(j) = &
	332	MIN( cross_uxmin_normalized_computed(j), uxmi )
	333	cross_uxmax_normalized_computed(j) = &
	334	MAX( cross_uxmax_normalized_computed(j), uxma )
	335	ENDIF
	336
	337	ENDDO
	338
	339	ENDIF
	340
	341	ENDIF ! Index determination
	342
	343	ENDIF ! profil output
	344
	345	ENDIF ! Initial profile available
	346
	347	ENDDO ! Loop over dopr_n for initial profiles
	348
[197]	349	IF ( netcdf_output .AND. output_for_t0 ) THEN
	350	dopr_time_count = dopr_time_count + 1
	351	ENDIF
[1]	352
	353	ENDIF ! Initial profiles
	354
	355	IF ( netcdf_output ) THEN
	356	#if defined( __netcdf )
	357	!
	358	!-- Store time to time axis
	359	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
	360	(/ simulated_time /), &
	361	start = (/ dopr_time_count /), &
	362	count = (/ 1 /) )
	363	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 338 )
	364
	365	!
	366	!-- Store normalization factors
	367	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
	368	(/ hom_sum(nzb,18,normalizing_region) /), &
	369	start = (/ dopr_time_count /), &
	370	count = (/ 1 /) )
	371	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 339 )
	372
	373	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
[87]	374	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
[1]	375	start = (/ dopr_time_count /), &
	376	count = (/ 1 /) )
	377	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 340 )
	378
	379	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
[87]	380	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	381	start = (/ dopr_time_count /), &
	382	count = (/ 1 /) )
	383	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 341 )
	384
	385	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
[87]	386	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
[1]	387	start = (/ dopr_time_count /), &
	388	count = (/ 1 /) )
	389	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 342 )
	390
	391	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
[87]	392	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
	393	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
[1]	394	start = (/ dopr_time_count /), &
	395	count = (/ 1 /) )
	396	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 343 )
	397
	398	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
[87]	399	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
	400	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	401	start = (/ dopr_time_count /), &
	402	count = (/ 1 /) )
	403	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 344 )
	404
	405	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
[87]	406	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
[1]	407	start = (/ dopr_time_count /), &
	408	count = (/ 1 /) )
	409	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 345 )
	410	#endif
	411	ENDIF
	412
	413	!
	414	!-- Output of the individual (non-initial) profiles
	415	DO i = 1, dopr_n
	416
	417	!
	418	!-- Output for the individual (sub-)domains
	419	DO sr = 0, statistic_regions
	420
	421	IF ( profil_output ) THEN
	422	id = 40 + sr
	423	!
	424	!-- Write Label-Header
	425	WRITE ( id, 100 ) TRIM( dopr_label(i) ), simulated_time_chr
	426	!
	427	!-- Output of total profile
	428	DO k = nzb, nzt+1
	429	WRITE ( id, 101 ) hom(k,2,dopr_index(i),sr), &
	430	hom_sum(k,dopr_index(i),sr)
	431	ENDDO
	432	!
	433	!-- Write separation label
	434	WRITE ( id, 102 )
	435	ENDIF
	436
	437	IF ( netcdf_output ) THEN
	438	#if defined( __netcdf )
	439	!
	440	!-- Write data to netcdf file
	441	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
	442	hom_sum(nzb:nzt+1,dopr_index(i),sr),&
	443	start = (/ 1, dopr_time_count /), &
	444	count = (/ nzt-nzb+2, 1 /) )
	445	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 346 )
	446	#endif
	447	ENDIF
	448
	449	ENDDO
	450
	451	IF ( profil_output ) THEN
	452	!
	453	!-- Determine profile number on file and note the data for later
	454	!-- NAMELIST output, if the respective profile is to be drawn by
	455	!-- PROFIL (if it shall not be drawn, the variable dopr_crossindex has
	456	!-- the value 0, otherwise the number of the coordinate cross)
	457	profile_number = profile_number + 1
	458	j = dopr_crossindex(i)
	459
	460	IF ( j /= 0 ) THEN
	461	cross_profile_number_count(j) = cross_profile_number_count(j) +1
	462	k = cross_profile_number_count(j)
	463	cross_pnc_local(j) = cross_pnc_local(j) +1
	464	cross_profile_numbers(k,j) = profile_number
	465	ilc = MOD( dopr_time_count, 10 )
	466	IF ( ilc == 0 ) ilc = 10
	467	cross_linecolors(k,j) = linecolors(ilc)
	468	ils = MOD( cross_pnc_local(j), 11 )
	469	IF ( ils == 0 ) ils = 11
	470	cross_linestyles(k,j) = linestyles(ils)
	471	!
	472	!-- If required, extend x-value range of the respective coordinate
	473	!-- cross, provided it has not been specified in check_parameters.
	474	!-- Determination over all (sub-)regions.
	475	IF ( cross_uxmin(j) == 0.0 .AND. cross_uxmax(j) == 0.0 ) THEN
	476
	477	DO sr = 0, statistic_regions
	478
	479	uxmi = MINVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
	480	uxma = MAXVAL( hom_sum(:nz_do1d,dopr_index(i),sr) )
	481	!
	482	!-- When the value range of the first line in the
	483	!-- corresponding cross is determined, its value range is
	484	!-- simply adopted.
	485	IF ( cross_uxmin_computed(j) > cross_uxmax_computed(j) ) &
	486	THEN
	487	cross_uxmin_computed(j) = uxmi
	488	cross_uxmax_computed(j) = uxma
	489	ELSE
	490	cross_uxmin_computed(j) = &
	491	MIN( cross_uxmin_computed(j), uxmi )
	492	cross_uxmax_computed(j) = &
	493	MAX( cross_uxmax_computed(j), uxma )
	494	ENDIF
	495
	496	ENDDO
	497
	498	ENDIF
	499	!
	500	!-- If required, store the normalizing factors
	501	SELECT CASE ( cross_normalized_x(j) )
	502
	503	CASE ( 'tsw2' )
	504	cross_normx_factor(k,j) = &
[87]	505	( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
[1]	506	CASE ( 'wpt0' )
	507	cross_normx_factor(k,j) = &
	508	hom_sum(nzb,18,normalizing_region)
	509	CASE ( 'wstsw2' )
	510	cross_normx_factor(k,j) = &
[87]	511	hom_sum(nzb+8,pr_palm,normalizing_region) &
	512	* ( hom_sum(nzb+11,pr_palm,normalizing_region) )**2
[1]	513	CASE ( 'ws2' )
	514	cross_normx_factor(k,j) = &
[87]	515	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2
[1]	516	CASE ( 'ws2tsw' )
	517	cross_normx_factor(k,j) = &
[87]	518	( hom_sum(nzb+8,pr_palm,normalizing_region) )**2&
	519	* hom_sum(nzb+11,pr_palm,normalizing_region)
[1]	520	CASE ( 'ws3' )
	521	cross_normx_factor(k,j) = &
[87]	522	( hom_sum(nzb+8,pr_palm,normalizing_region) )**3
[1]	523
	524	END SELECT
	525	SELECT CASE ( cross_normalized_y(j) )
	526
	527	CASE ( 'z_i' )
	528	cross_normy_factor(k,j) = &
[87]	529	hom_sum(nzb+6,pr_palm,normalizing_region)
[1]	530
	531	END SELECT
	532
	533	!
	534	!-- Check the normalizing factors for zeros and deactivate the
	535	!-- normalization, if required.
	536	IF ( cross_normx_factor(k,j) == 0.0 .OR. &
	537	cross_normy_factor(k,j) == 0.0 ) THEN
	538	PRINT*,'+++ WARNING data_output_profiles: normalizing ',j, &
	539	' cross is not possible since one of the'
	540	PRINT*,' normalizing factors is zero!'
	541	PRINT*,' cross_normx_factor(',k,',',j,') = ', &
	542	cross_normx_factor(k,j)
	543	PRINT*,' cross_normy_factor(',k,',',j,') = ', &
	544	cross_normy_factor(k,j)
	545	cross_normx_factor(k,j) = 1.0
	546	cross_normy_factor(k,j) = 1.0
	547	cross_normalized_x(j) = ' '
	548	cross_normalized_y(j) = ' '
	549	ENDIF
	550
	551	!
	552	!-- If required, extend normalized x-value range of the respective
	553	!-- cross, provided it has not been specified in check_parameters.
	554	!-- Determination over all (sub-)regions.
	555	IF ( cross_uxmin_normalized(j) == 0.0 .AND. &
	556	cross_uxmax_normalized(j) == 0.0 ) THEN
	557
	558	DO sr = 0, statistic_regions
	559
	560	uxmi = MINVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
	561	cross_normx_factor(k,j)
	562	uxma = MAXVAL( hom(:nz_do1d,1,dopr_index(i),sr) ) / &
	563	cross_normx_factor(k,j)
	564	!
	565	!-- When the value range of the first line in the
	566	!-- corresponding cross is determined, its value range is
	567	!-- simply adopted.
	568	IF ( cross_uxmin_normalized_computed(j) > &
	569	cross_uxmax_normalized_computed(j) ) THEN
	570	cross_uxmin_normalized_computed(j) = uxmi
	571	cross_uxmax_normalized_computed(j) = uxma
	572	ELSE
	573	cross_uxmin_normalized_computed(j) = &
	574	MIN( cross_uxmin_normalized_computed(j), uxmi )
	575	cross_uxmax_normalized_computed(j) = &
	576	MAX( cross_uxmax_normalized_computed(j), uxma )
	577	ENDIF
	578
	579	ENDDO
	580
	581	ENDIF
	582
	583	ENDIF ! Index determination
	584
	585	ENDIF ! profil output
	586
	587	ENDDO ! Loop over dopr_n
	588
	589	ENDIF ! Output on PE0
	590
	591	!
	592	!-- If averaging has been done above, the summation counter must be re-set.
	593	IF ( averaging_interval_pr /= 0.0 ) THEN
	594	average_count_pr = 0
	595	ENDIF
	596
	597	CALL cpu_log( log_point(15), 'data_output_profiles','stop', 'nobarrier' )
	598
	599	!
	600	!-- Formats
	601	100 FORMAT ('#1 ',A,1X,A)
	602	101 FORMAT (E15.7,1X,E15.7)
	603	102 FORMAT ('NEXT')
	604
	605	END SUBROUTINE data_output_profiles

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |