Home

Context Navigation

source: palm/trunk/SOURCE/data_output_profiles.f90 @ 1016

Last change on this file since 1016 was 965, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 10.8 KB

Rev	Line
[1]	1	SUBROUTINE data_output_profiles
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[965]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: data_output_profiles.f90 965 2012-07-26 09:29:52Z raasch $
	11	!
[965]	12	! 964 2012-07-26 09:14:24Z raasch
	13	! code for profil-output removed
	14	!
[392]	15	! 345 2009-07-01 14:37:56Z heinze
[345]	16	! In case of restart runs without extension, initial profiles are not written
	17	! to NetCDF-file anymore.
[291]	18	! simulated_time in NetCDF output replaced by time_since_reference_point.
[263]	19	! Output of NetCDF messages with aid of message handling routine.
[254]	20	! Output of messages replaced by message handling routine.
[1]	21	!
[198]	22	! 197 2008-09-16 15:29:03Z raasch
	23	! Time coordinate t=0 stored on netcdf-file only if an output is required for
	24	! this time for at least one of the profiles
	25	!
	26	! February 2007
[3]	27	! RCS Log replace by Id keyword, revision history cleaned up
	28	!
[90]	29	! 87 2007-05-22 15:46:47Z raasch
	30	! var_hom renamed pr_palm
	31	!
[1]	32	! Revision 1.18 2006/08/16 14:27:04 raasch
	33	! PRINT* statements for testing removed
	34	!
	35	! Revision 1.1 1997/09/12 06:28:48 raasch
	36	! Initial revision
	37	!
	38	!
	39	! Description:
	40	! ------------
	41	! Plot output of 1D-profiles for PROFIL
	42	!------------------------------------------------------------------------------!
	43
	44	USE control_parameters
	45	USE cpulog
	46	USE indices
	47	USE interfaces
	48	USE netcdf_control
	49	USE pegrid
	50	USE profil_parameter
	51	USE statistics
	52
	53	IMPLICIT NONE
	54
	55
	56	INTEGER :: i, id, ilc, ils, j, k, sr
	57
	58	!
	59	!-- If required, compute statistics
	60	IF ( .NOT. flow_statistics_called ) CALL flow_statistics
	61
	62	!
	63	!-- Flow_statistics has its own CPU time measurement
	64	CALL cpu_log( log_point(15), 'data_output_profiles', 'start' )
	65
	66	!
	67	!-- If required, compute temporal average
	68	IF ( averaging_interval_pr == 0.0 ) THEN
	69	hom_sum(:,:,:) = hom(:,1,:,:)
	70	ELSE
	71	IF ( average_count_pr > 0 ) THEN
	72	hom_sum = hom_sum / REAL( average_count_pr )
	73	ELSE
	74	!
	75	!-- This case may happen if dt_dopr is changed in the d3par-list of
	76	!-- a restart run
	77	RETURN
	78	ENDIF
	79	ENDIF
	80
	81
	82	IF ( myid == 0 ) THEN
	83
	84	!
	85	!-- Plot-output for each (sub-)region
	86
	87	!
	88	!-- Open file for profile output in NetCDF format
	89	IF ( netcdf_output ) THEN
	90	CALL check_open( 104 )
	91	ENDIF
	92
	93	!
	94	!-- Increment the counter for number of output times
	95	dopr_time_count = dopr_time_count + 1
	96
	97	!
	98	!-- Output of initial profiles
	99	IF ( dopr_time_count == 1 ) THEN
[345]	100
	101	IF ( .NOT. output_for_t0 ) THEN
[1]	102
[345]	103	IF ( netcdf_output ) THEN
	104	#if defined( __netcdf )
[1]	105	!
[345]	106	!-- Store initial time (t=0) to time axis, but only if an output
	107	!-- is required for at least one of the profiles
	108	DO i = 1, dopr_n
[197]	109	IF ( dopr_initial_index(i) /= 0 ) THEN
	110	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
[345]	111	(/ 0.0 /), start = (/ 1 /), &
	112	count = (/ 1 /) )
	113	CALL handle_netcdf_error( 'data_output_profiles', 329 )
	114	output_for_t0 = .TRUE.
	115	EXIT
	116	ENDIF
	117	ENDDO
[1]	118
	119	!
[345]	120	!-- Store normalization factors
	121	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
	122	(/ hom_sum(nzb,18,normalizing_region) /), &
	123	start = (/ 1 /), count = (/ 1 /) )
	124	CALL handle_netcdf_error( 'data_output_profiles', 330 )
[1]	125
[345]	126	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
	127	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
	128	start = (/ 1 /), count = (/ 1 /) )
	129	CALL handle_netcdf_error( 'data_output_profiles', 331 )
	130	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
	131	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	132	start = (/ 1 /), count = (/ 1 /) )
[345]	133	CALL handle_netcdf_error( 'data_output_profiles', 332 )
	134	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
	135	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
	136	start = (/ 1 /), count = (/ 1 /) )
	137	CALL handle_netcdf_error( 'data_output_profiles', 333 )
[1]	138
[345]	139	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), &!ws2tsw
	140	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
	141	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
	142	start = (/ 1 /), count = (/ 1 /) )
	143	CALL handle_netcdf_error( 'data_output_profiles', 334 )
[1]	144
[345]	145	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), &!wstsw2
	146	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
	147	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
	148	start = (/ 1 /), count = (/ 1 /) )
	149	CALL handle_netcdf_error( 'data_output_profiles', 335 )
[1]	150
[345]	151	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
	152	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
	153	start = (/ 1 /), count = (/ 1 /) )
	154	CALL handle_netcdf_error( 'data_output_profiles', 336 )
	155
[1]	156	#endif
[345]	157	ENDIF
[1]	158	!
[345]	159	!-- Loop over all 1D variables
	160	DO i = 1, dopr_n
[1]	161
[345]	162	IF ( dopr_initial_index(i) /= 0 ) THEN
[1]	163
	164	!
[345]	165	!-- Output for the individual (sub-)regions
	166	DO sr = 0, statistic_regions
[1]	167
[345]	168	IF ( netcdf_output ) THEN
[1]	169	#if defined( __netcdf )
	170	!
[345]	171	!-- Write data to netcdf file
	172	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
	173	hom(nzb:nzt+1,1,dopr_initial_index(i),sr), &
	174	start = (/ 1, 1 /), &
	175	count = (/ nzt-nzb+2, 1 /) )
	176	CALL handle_netcdf_error( 'data_output_profiles', 337 )
[1]	177	#endif
[345]	178	ENDIF
[1]	179
[345]	180	ENDDO
[1]	181
[345]	182	ENDIF ! Initial profile available
[1]	183
[345]	184	ENDDO ! Loop over dopr_n for initial profiles
[1]	185
[345]	186	IF ( netcdf_output .AND. output_for_t0 ) THEN
	187	dopr_time_count = dopr_time_count + 1
	188	ENDIF
[1]	189
[345]	190	END IF
[1]	191	ENDIF ! Initial profiles
	192
	193	IF ( netcdf_output ) THEN
	194	#if defined( __netcdf )
[345]	195
[1]	196	!
	197	!-- Store time to time axis
[291]	198	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_time_pr, &
	199	(/ time_since_reference_point /), &
	200	start = (/ dopr_time_count /), &
[1]	201	count = (/ 1 /) )
[263]	202	CALL handle_netcdf_error( 'data_output_profiles', 338 )
[1]	203
	204	!
	205	!-- Store normalization factors
	206	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(1), & ! wpt0
	207	(/ hom_sum(nzb,18,normalizing_region) /), &
	208	start = (/ dopr_time_count /), &
	209	count = (/ 1 /) )
[263]	210	CALL handle_netcdf_error( 'data_output_profiles', 339 )
[1]	211
	212	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(2), & ! ws2
[87]	213	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**2 /), &
[1]	214	start = (/ dopr_time_count /), &
	215	count = (/ 1 /) )
[263]	216	CALL handle_netcdf_error( 'data_output_profiles', 340 )
[1]	217
	218	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(3), & ! tsw2
[87]	219	(/ hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	220	start = (/ dopr_time_count /), &
	221	count = (/ 1 /) )
[263]	222	CALL handle_netcdf_error( 'data_output_profiles', 341 )
[1]	223
	224	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(4), & ! ws3
[87]	225	(/ hom_sum(nzb+8,pr_palm,normalizing_region)**3 /), &
[1]	226	start = (/ dopr_time_count /), &
	227	count = (/ 1 /) )
[263]	228	CALL handle_netcdf_error( 'data_output_profiles', 342 )
[1]	229
	230	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(5), & ! ws2tsw
[87]	231	(/ hom_sum(nzb+8,pr_palm,normalizing_region)*3 &
	232	hom_sum(nzb+3,pr_palm,normalizing_region) /), &
[1]	233	start = (/ dopr_time_count /), &
	234	count = (/ 1 /) )
[263]	235	CALL handle_netcdf_error( 'data_output_profiles', 343 )
	236
[1]	237	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(6), & ! wstsw2
[87]	238	(/ hom_sum(nzb+8,pr_palm,normalizing_region) * &
	239	hom_sum(nzb+3,pr_palm,normalizing_region)**2 /), &
[1]	240	start = (/ dopr_time_count /), &
	241	count = (/ 1 /) )
[263]	242	CALL handle_netcdf_error( 'data_output_profiles', 344 )
[1]	243
	244	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_norm_dopr(7), & ! z_i
[87]	245	(/ hom_sum(nzb+6,pr_palm,normalizing_region) /), &
[1]	246	start = (/ dopr_time_count /), &
	247	count = (/ 1 /) )
[263]	248	CALL handle_netcdf_error( 'data_output_profiles', 345 )
[1]	249	#endif
	250	ENDIF
	251
	252	!
	253	!-- Output of the individual (non-initial) profiles
	254	DO i = 1, dopr_n
	255
	256	!
	257	!-- Output for the individual (sub-)domains
	258	DO sr = 0, statistic_regions
	259
	260	IF ( netcdf_output ) THEN
	261	#if defined( __netcdf )
	262	!
	263	!-- Write data to netcdf file
	264	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_dopr(i,sr), &
	265	hom_sum(nzb:nzt+1,dopr_index(i),sr),&
	266	start = (/ 1, dopr_time_count /), &
	267	count = (/ nzt-nzb+2, 1 /) )
[263]	268	CALL handle_netcdf_error( 'data_output_profiles', 346 )
[1]	269	#endif
	270	ENDIF
	271
	272	ENDDO
	273
[964]	274	ENDDO
[1]	275
	276	ENDIF ! Output on PE0
	277
	278	!
	279	!-- If averaging has been done above, the summation counter must be re-set.
	280	IF ( averaging_interval_pr /= 0.0 ) THEN
	281	average_count_pr = 0
	282	ENDIF
	283
	284	CALL cpu_log( log_point(15), 'data_output_profiles','stop', 'nobarrier' )
	285
	286	!
	287	!-- Formats
	288	100 FORMAT ('#1 ',A,1X,A)
	289	101 FORMAT (E15.7,1X,E15.7)
	290	102 FORMAT ('NEXT')
	291
	292	END SUBROUTINE data_output_profiles

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |