Home

Context Navigation

source: palm/trunk/SOURCE/data_output_dvrp.f90 @ 9

Last change on this file since 9 was 4, checked in by raasch, 18 years ago
Id keyword set as property for all *.f90 files
Property svn:keywords set to `Id`
File size: 16.8 KB

Line
1	MODULE dvrp_color
2
3	USE dvrp_variables
4
5	IMPLICIT NONE
6
7	CONTAINS
8
9	SUBROUTINE color_dvrp( value, color )
10
11	REAL, INTENT(IN) :: value
12	REAL, INTENT(OUT) :: color(4)
13
14	REAL :: scale
15
16	scale = ( value - slicer_range_limits_dvrp(1,islice_dvrp) ) / &
17	( slicer_range_limits_dvrp(2,islice_dvrp) - &
18	slicer_range_limits_dvrp(1,islice_dvrp) )
19
20	scale = MODULO( 180.0 + 180.0 * scale, 360.0 )
21
22	color = (/ scale, 0.5, 1.0, 0.0 /)
23
24	END SUBROUTINE color_dvrp
25
26	END MODULE dvrp_color
27
28
29	RECURSIVE SUBROUTINE data_output_dvrp
30
31	!------------------------------------------------------------------------------!
32	! Actual revisions:
33	! -----------------
34	! TEST: write statements
35	!
36	! Former revisions:
37	! -----------------
38	! $Id: data_output_dvrp.f90 4 2007-02-13 11:33:16Z raasch $
39	! RCS Log replace by Id keyword, revision history cleaned up
40	!
41	! Revision 1.13 2006/02/23 10:25:12 raasch
42	! Former routine plot_dvrp renamed data_output_dvrp,
43	! Only a fraction of the particles may have a tail,
44	! pl.. replaced by do.., %size renamed %dvrp_psize
45	!
46	! Revision 1.1 2000/04/27 06:27:17 raasch
47	! Initial revision
48	!
49	!
50	! Description:
51	! ------------
52	! Plot of isosurface, particles and slicers with dvrp-software
53	!------------------------------------------------------------------------------!
54	#if defined( __dvrp_graphics )
55
56	USE arrays_3d
57	USE cloud_parameters
58	USE cpulog
59	USE DVRP
60	USE dvrp_color
61	USE dvrp_variables
62	USE grid_variables
63	USE indices
64	USE interfaces
65	USE particle_attributes
66	USE pegrid
67	USE control_parameters
68
69	IMPLICIT NONE
70
71	CHARACTER (LEN=2) :: section_chr
72	CHARACTER (LEN=6) :: output_variable
73	INTEGER :: i, j, k, l, m, n, nn, section_mode, tv, vn
74	INTEGER, DIMENSION(:), ALLOCATABLE :: p_c, p_t
75	REAL :: center(3), distance, slicer_position, surface_value
76	REAL, DIMENSION(:), ALLOCATABLE :: psize, p_x, p_y, p_z
77	REAL, DIMENSION(:,:,:), ALLOCATABLE :: local_pf
78
79
80	WRITE ( 9, * ) '*** myid=', myid, ' Anfang data_output_dvrp'
81	CALL FLUSH_( 9 )
82	CALL cpu_log( log_point(27), 'data_output_dvrp', 'start' )
83
84	!
85	!-- Loop over all output modes choosed
86	m = 1
87	tv = 0 ! threshold counter
88	islice_dvrp = 0 ! slice plane counter
89	DO WHILE ( mode_dvrp(m) /= ' ' )
90	!
91	!-- Update of the steering variables
92	IF ( .NOT. lock_steering_update ) THEN
93	!
94	!-- Set lock to avoid recursive calls of DVRP_STEERING_UPDATE
95	lock_steering_update = .TRUE.
96	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: vor steering_update'
97	CALL FLUSH_( 9 )
98	CALL DVRP_STEERING_UPDATE( m-1, data_output_dvrp )
99	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: nach steering_update'
100	CALL FLUSH_( 9 )
101	lock_steering_update = .FALSE.
102	ENDIF
103
104	!
105	!-- Determine the variable which shall be plotted (in case of slicers or
106	!-- isosurfaces)
107	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
108	READ ( mode_dvrp(m), '(10X,I1)' ) vn
109	output_variable = do3d(0,vn)
110	tv = tv + 1
111	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
112	READ ( mode_dvrp(m), '(6X,I1)' ) vn
113	output_variable = do2d(0,vn)
114	l = MAX( 2, LEN_TRIM( do2d(0,vn) ) )
115	section_chr = do2d(0,vn)(l-1:l)
116	SELECT CASE ( section_chr )
117	CASE ( 'xy' )
118	section_mode = 2
119	slicer_position = zu(MIN( slicer_position_dvrp(m), nz_do3d ))
120	CASE ( 'xz' )
121	section_mode = 1
122	slicer_position = slicer_position_dvrp(m) * dy
123	CASE ( 'yz' )
124	section_mode = 0
125	slicer_position = slicer_position_dvrp(m) * dx
126	END SELECT
127	ENDIF
128
129	!
130	!-- Select the plot mode (in case of isosurface or slicer only if user has
131	!-- defined a variable which shall be plotted; otherwise do nothing)
132	IF ( mode_dvrp(m)(1:9) == 'particles' ) THEN
133
134	#if defined( __particles )
135	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang particles'
136	CALL FLUSH_( 9 )
137	!
138	!-- DVRP-Calls for plotting particles:
139	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'start' )
140
141	!
142	!-- Definition of characteristics of particle material
143	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.1, 0.7, 0.1, 0.0 )
144
145	!
146	!-- Move particle coordinates to one-dimensional arrays
147	IF ( .NOT. use_particle_tails ) THEN
148	!
149	!-- All particles are output
150	ALLOCATE( psize(number_of_particles), p_t(number_of_particles), &
151	p_c(number_of_particles), p_x(number_of_particles), &
152	p_y(number_of_particles), p_z(number_of_particles) )
153	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
154	p_z = 0.0;
155	psize = particles(1:number_of_particles)%dvrp_psize
156	p_x = particles(1:number_of_particles)%x * superelevation_x
157	p_y = particles(1:number_of_particles)%y * superelevation_y
158	p_z = particles(1:number_of_particles)%z * superelevation
159	p_c = particles(1:number_of_particles)%color
160	ELSE
161	!
162	!-- Particles have a tail
163	WRITE (9,*) '--- before ALLOCATE simtime=',simulated_time,' #of_tails=', number_of_tails, &
164	' max#of_tp=', maximum_number_of_tailpoints
165	CALL FLUSH_( 9 )
166	ALLOCATE( psize(number_of_tails), p_t(number_of_tails), &
167	p_c(number_of_tails*maximum_number_of_tailpoints), &
168	p_x(number_of_tails*maximum_number_of_tailpoints), &
169	p_y(number_of_tails*maximum_number_of_tailpoints), &
170	p_z(number_of_tails*maximum_number_of_tailpoints) )
171	WRITE (9,*) '--- after ALLOCATE'
172	CALL FLUSH_( 9 )
173	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
174	p_z = 0.0;
175	i = 0
176	k = 0
177	DO n = 1, number_of_particles
178	nn = particles(n)%tail_id
179	IF ( nn /= 0 ) THEN
180	k = k + 1
181	IF ( simulated_time > 1338.0 ) THEN
182	WRITE (9,*) '--- particle ',n,' tail_id=',nn,' #of_tp=',particles(n)%tailpoints
183	CALL FLUSH_( 9 )
184	ENDIF
185	DO j = 1, particles(n)%tailpoints
186	i = i + 1
187	p_x(i) = particle_tail_coordinates(j,1,nn) * &
188	superelevation_x
189	p_y(i) = particle_tail_coordinates(j,2,nn) * &
190	superelevation_y
191	p_z(i) = particle_tail_coordinates(j,3,nn) * &
192	superelevation
193	p_c(i) = particle_tail_coordinates(j,4,nn)
194	IF ( simulated_time > 1338.0 ) THEN
195	WRITE (9,*) '--- tp= ',i,' x=',p_x(i),' y=',p_y(i), &
196	' z=',p_z(i),' c=',p_c(i)
197	CALL FLUSH_( 9 )
198	ENDIF
199	ENDDO
200	psize(k) = particles(n)%dvrp_psize
201	p_t(k) = particles(n)%tailpoints - 1
202	IF ( simulated_time > 1338.0 ) THEN
203	WRITE (9,*) '--- t= ',k,' psize=',psize(k),' p_t=',p_t(k)
204	CALL FLUSH_( 9 )
205	ENDIF
206	ENDIF
207	ENDDO
208	WRITE (9,*) '--- after locally storing the particle attributes'
209	CALL FLUSH_( 9 )
210	ENDIF
211
212	!
213	!-- Compute and plot particles in dvr-format
214	IF ( uniform_particles .AND. .NOT. use_particle_tails ) THEN
215	!
216	!-- All particles have the same color. Use simple routine to set
217	!-- the particle attributes (produces less output data)
218	CALL DVRP_PARTICLES( m-1, p_x, p_y, p_z, psize )
219	ELSE
220	!
221	!-- Set color definitions
222	CALL user_dvrp_coltab( 'particles', 'none' )
223
224	CALL DVRP_COLORTABLE_HLS( m-1, 0, interval_values_dvrp, &
225	interval_h_dvrp, interval_l_dvrp, &
226	interval_s_dvrp, interval_a_dvrp )
227
228	IF ( .NOT. use_particle_tails ) THEN
229	CALL DVRP_PARTICLES( m-1, number_of_particles, p_x, p_y, p_z, &
230	3, psize, p_c, p_t )
231	ELSE
232	WRITE (9,*) '--- before DVRP_PARTICLES'
233	CALL FLUSH_( 9 )
234	CALL DVRP_PARTICLES( m-1, number_of_tails, p_x, p_y, p_z, 15, &
235	psize, p_c, p_t )
236	WRITE (9,*) '--- after DVRP_PARTICLES'
237	CALL FLUSH_( 9 )
238	ENDIF
239	ENDIF
240
241	CALL DVRP_VISUALIZE( m-1, 3, dvrp_filecount )
242	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende particles'
243	CALL FLUSH_( 9 )
244
245	DEALLOCATE( psize, p_c, p_t, p_x, p_y, p_z )
246
247	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'stop' )
248	#endif
249
250
251	ELSEIF ( ( mode_dvrp(m)(1:10) == 'isosurface' .OR. &
252	mode_dvrp(m)(1:6) == 'slicer' ) &
253	.AND. output_variable /= ' ' ) THEN
254
255	!
256	!-- Create an intermediate array, properly dimensioned for plot-output
257	ALLOCATE( local_pf(nxl:nxr+1,nys:nyn+1,nzb:nz_do3d) )
258
259	!
260	!-- Move original array to intermediate array
261	SELECT CASE ( output_variable )
262
263	CASE ( 'u', 'u_xy', 'u_xz', 'u_yz' )
264	DO i = nxl, nxr+1
265	DO j = nys, nyn+1
266	DO k = nzb, nz_do3d
267	local_pf(i,j,k) = u(k,j,i)
268	ENDDO
269	ENDDO
270	ENDDO
271	!
272	!-- Replace mirrored values at lower surface by real surface values
273	IF ( output_variable == 'u_xz' .OR. &
274	output_variable == 'u_yz' ) THEN
275	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
276	ENDIF
277
278
279	CASE ( 'v', 'v_xy', 'v_xz', 'v_yz' )
280	DO i = nxl, nxr+1
281	DO j = nys, nyn+1
282	DO k = nzb, nz_do3d
283	local_pf(i,j,k) = v(k,j,i)
284	ENDDO
285	ENDDO
286	ENDDO
287	!
288	!-- Replace mirrored values at lower surface by real surface values
289	IF ( output_variable == 'v_xz' .OR. &
290	output_variable == 'v_yz' ) THEN
291	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
292	ENDIF
293
294	CASE ( 'w', 'w_xy', 'w_xz', 'w_yz' )
295	DO i = nxl, nxr+1
296	DO j = nys, nyn+1
297	DO k = nzb, nz_do3d
298	local_pf(i,j,k) = w(k,j,i)
299	ENDDO
300	ENDDO
301	ENDDO
302
303	CASE ( 'p', 'p_xy', 'p_xz', 'p_yz' )
304	DO i = nxl, nxr+1
305	DO j = nys, nyn+1
306	DO k = nzb, nz_do3d
307	local_pf(i,j,k) = p(k,j,i)
308	ENDDO
309	ENDDO
310	ENDDO
311
312	CASE ( 'pt', 'pt_xy', 'pt_xz', 'pt_yz' )
313	IF ( .NOT. cloud_physics ) THEN
314	DO i = nxl, nxr+1
315	DO j = nys, nyn+1
316	DO k = nzb, nz_do3d
317	local_pf(i,j,k) = pt(k,j,i)
318	ENDDO
319	ENDDO
320	ENDDO
321	ELSE
322	DO i = nxl, nxr+1
323	DO j = nys, nyn+1
324	DO k = nzb, nz_do3d
325	local_pf(i,j,k) = pt(k,j,i) + l_d_cp * pt_d_t(k) * &
326	ql(k,j,i)
327	ENDDO
328	ENDDO
329	ENDDO
330	ENDIF
331
332	CASE ( 'q', 'q_xy', 'q_xz', 'q_yz' )
333	IF ( moisture .OR. passive_scalar ) THEN
334	DO i = nxl, nxr+1
335	DO j = nys, nyn+1
336	DO k = nzb, nz_do3d
337	local_pf(i,j,k) = q(k,j,i)
338	ENDDO
339	ENDDO
340	ENDDO
341	ELSE
342	IF ( myid == 0 ) THEN
343	PRINT*, '+++ data_output_dvrp: if moisture/passive_scalar = ', &
344	'FALSE output of ', output_variable, &
345	'is not provided'
346	ENDIF
347	ENDIF
348
349	CASE ( 'ql', 'ql_xy', 'ql_xz', 'ql_yz' )
350	IF ( cloud_physics .OR. cloud_droplets ) THEN
351	DO i = nxl, nxr+1
352	DO j = nys, nyn+1
353	DO k = nzb, nz_do3d
354	local_pf(i,j,k) = ql(k,j,i)
355	ENDDO
356	ENDDO
357	ENDDO
358	ELSE
359	IF ( myid == 0 ) THEN
360	PRINT*, '+++ data_output_dvrp: if cloud_physics = FALSE ', &
361	'output of ', output_variable, 'is not provided'
362	ENDIF
363	ENDIF
364
365	CASE ( 'u*_xy' )
366	DO i = nxl, nxr+1
367	DO j = nys, nyn+1
368	local_pf(i,j,nzb+1) = us(j,i)
369	ENDDO
370	ENDDO
371	slicer_position = zu(nzb+1)
372
373	CASE ( 't*_xy' )
374	DO i = nxl, nxr+1
375	DO j = nys, nyn+1
376	local_pf(i,j,nzb+1) = ts(j,i)
377	ENDDO
378	ENDDO
379	slicer_position = zu(nzb+1)
380
381
382	CASE DEFAULT
383	IF ( myid == 0 ) THEN
384	PRINT*,'+++ data_output_dvrp: no output possible for: ', &
385	output_variable
386	ENDIF
387
388	END SELECT
389
390
391	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
392
393	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang isosurface'
394	CALL FLUSH_( 9 )
395	!
396	!-- DVRP-Calls for plotting isosurfaces:
397	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'start' )
398
399	!
400	!-- Definition of characteristics of isosurface material
401	!-- Preliminary settings for w!
402	IF ( output_variable == 'w' ) THEN
403	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.3, 0.8, 0.3, 0.0 )
404	ELSE
405	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.9, 0.9, 0.9, 0.0 )
406	ENDIF
407
408	!
409	!-- Compute and plot isosurface in dvr-format
410	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
411	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
412	CALL DVRP_THRESHOLD( m-1, threshold(tv) )
413	CALL DVRP_VISUALIZE( m-1, 1, dvrp_filecount )
414	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende isosurface'
415	CALL FLUSH_( 9 )
416
417	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'stop' )
418
419	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
420
421	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang slicer'
422	CALL FLUSH_( 9 )
423	!
424	!-- DVRP-Calls for plotting slicers:
425	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'start' )
426
427	!
428	!-- Material and color definitions
429	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.0, 0.0, 0.0, 0.0 )
430
431	islice_dvrp = islice_dvrp + 1
432	! CALL DVRP_COLORFUNCTION( m-1, DVRP_CM_HLS, 25, &
433	! slicer_range_limits_dvrp(:,islice_dvrp), &
434	! color_dvrp )
435
436	CALL user_dvrp_coltab( 'slicer', output_variable )
437
438	CALL DVRP_COLORTABLE_HLS( m-1, 1, interval_values_dvrp, &
439	interval_h_dvrp, interval_l_dvrp, &
440	interval_s_dvrp, interval_a_dvrp )
441
442	!
443	!-- Compute and plot slicer in dvr-format
444	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
445	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
446	CALL DVRP_SLICER( m-1, section_mode, slicer_position )
447	CALL DVRP_VISUALIZE( m-1, 2, dvrp_filecount )
448
449	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'stop' )
450
451	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende slicer'
452	CALL FLUSH_( 9 )
453	ENDIF
454
455	DEALLOCATE( local_pf )
456
457	ENDIF
458
459	m = m + 1
460
461	ENDDO
462
463	dvrp_filecount = dvrp_filecount + 1
464
465	CALL cpu_log( log_point(27), 'data_output_dvrp', 'stop' )
466	WRITE ( 9, * ) '*** myid=', myid, ' Ende data_output_dvrp'
467	CALL FLUSH_( 9 )
468
469	#endif
470	END SUBROUTINE data_output_dvrp

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |