Home

Context Navigation

source: palm/trunk/SOURCE/data_output_dvrp.f90 @ 30

Last change on this file since 30 was 13, checked in by raasch, 18 years ago
flush calls adjusted
Property svn:keywords set to `Id`
File size: 18.8 KB

Line
1	MODULE dvrp_color
2
3	USE dvrp_variables
4
5	IMPLICIT NONE
6
7	CONTAINS
8
9	SUBROUTINE color_dvrp( value, color )
10
11	REAL, INTENT(IN) :: value
12	REAL, INTENT(OUT) :: color(4)
13
14	REAL :: scale
15
16	scale = ( value - slicer_range_limits_dvrp(1,islice_dvrp) ) / &
17	( slicer_range_limits_dvrp(2,islice_dvrp) - &
18	slicer_range_limits_dvrp(1,islice_dvrp) )
19
20	scale = MODULO( 180.0 + 180.0 * scale, 360.0 )
21
22	color = (/ scale, 0.5, 1.0, 0.0 /)
23
24	END SUBROUTINE color_dvrp
25
26	END MODULE dvrp_color
27
28
29	RECURSIVE SUBROUTINE data_output_dvrp
30
31	!------------------------------------------------------------------------------!
32	! Actual revisions:
33	! -----------------
34	! TEST: write statements
35	!
36	! Former revisions:
37	! -----------------
38	! $Id: data_output_dvrp.f90 13 2007-02-14 12:15:07Z raasch $
39	! RCS Log replace by Id keyword, revision history cleaned up
40	!
41	! Revision 1.13 2006/02/23 10:25:12 raasch
42	! Former routine plot_dvrp renamed data_output_dvrp,
43	! Only a fraction of the particles may have a tail,
44	! pl.. replaced by do.., %size renamed %dvrp_psize
45	!
46	! Revision 1.1 2000/04/27 06:27:17 raasch
47	! Initial revision
48	!
49	!
50	! Description:
51	! ------------
52	! Plot of isosurface, particles and slicers with dvrp-software
53	!------------------------------------------------------------------------------!
54	#if defined( __dvrp_graphics )
55
56	USE arrays_3d
57	USE cloud_parameters
58	USE cpulog
59	USE DVRP
60	USE dvrp_color
61	USE dvrp_variables
62	USE grid_variables
63	USE indices
64	USE interfaces
65	USE particle_attributes
66	USE pegrid
67	USE control_parameters
68
69	IMPLICIT NONE
70
71	CHARACTER (LEN=2) :: section_chr
72	CHARACTER (LEN=6) :: output_variable
73	INTEGER :: i, j, k, l, m, n, nn, section_mode, tv, vn
74	INTEGER, DIMENSION(:), ALLOCATABLE :: p_c, p_t
75	REAL :: center(3), distance, slicer_position, surface_value
76	REAL, DIMENSION(:), ALLOCATABLE :: psize, p_x, p_y, p_z
77	REAL, DIMENSION(:,:,:), ALLOCATABLE :: local_pf
78
79
80	WRITE ( 9, * ) '*** myid=', myid, ' Anfang data_output_dvrp'
81	#if defined( __ibm )
82	CALL FLUSH_( 9 )
83	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
84	CALL FLUSH( 9 )
85	#endif
86	CALL cpu_log( log_point(27), 'data_output_dvrp', 'start' )
87
88	!
89	!-- Loop over all output modes choosed
90	m = 1
91	tv = 0 ! threshold counter
92	islice_dvrp = 0 ! slice plane counter
93	DO WHILE ( mode_dvrp(m) /= ' ' )
94	!
95	!-- Update of the steering variables
96	IF ( .NOT. lock_steering_update ) THEN
97	!
98	!-- Set lock to avoid recursive calls of DVRP_STEERING_UPDATE
99	lock_steering_update = .TRUE.
100	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: vor steering_update'
101	#if defined( __ibm )
102	CALL FLUSH_( 9 )
103	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
104	CALL FLUSH( 9 )
105	#endif
106	CALL DVRP_STEERING_UPDATE( m-1, data_output_dvrp )
107	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: nach steering_update'
108	#if defined( __ibm )
109	CALL FLUSH_( 9 )
110	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
111	CALL FLUSH( 9 )
112	#endif
113	lock_steering_update = .FALSE.
114	ENDIF
115
116	!
117	!-- Determine the variable which shall be plotted (in case of slicers or
118	!-- isosurfaces)
119	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
120	READ ( mode_dvrp(m), '(10X,I1)' ) vn
121	output_variable = do3d(0,vn)
122	tv = tv + 1
123	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
124	READ ( mode_dvrp(m), '(6X,I1)' ) vn
125	output_variable = do2d(0,vn)
126	l = MAX( 2, LEN_TRIM( do2d(0,vn) ) )
127	section_chr = do2d(0,vn)(l-1:l)
128	SELECT CASE ( section_chr )
129	CASE ( 'xy' )
130	section_mode = 2
131	slicer_position = zu(MIN( slicer_position_dvrp(m), nz_do3d ))
132	CASE ( 'xz' )
133	section_mode = 1
134	slicer_position = slicer_position_dvrp(m) * dy
135	CASE ( 'yz' )
136	section_mode = 0
137	slicer_position = slicer_position_dvrp(m) * dx
138	END SELECT
139	ENDIF
140
141	!
142	!-- Select the plot mode (in case of isosurface or slicer only if user has
143	!-- defined a variable which shall be plotted; otherwise do nothing)
144	IF ( mode_dvrp(m)(1:9) == 'particles' ) THEN
145
146	#if defined( __particles )
147	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang particles'
148	#if defined( __ibm )
149	CALL FLUSH_( 9 )
150	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
151	CALL FLUSH( 9 )
152	#endif
153	!
154	!-- DVRP-Calls for plotting particles:
155	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'start' )
156
157	!
158	!-- Definition of characteristics of particle material
159	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.1, 0.7, 0.1, 0.0 )
160
161	!
162	!-- Move particle coordinates to one-dimensional arrays
163	IF ( .NOT. use_particle_tails ) THEN
164	!
165	!-- All particles are output
166	ALLOCATE( psize(number_of_particles), p_t(number_of_particles), &
167	p_c(number_of_particles), p_x(number_of_particles), &
168	p_y(number_of_particles), p_z(number_of_particles) )
169	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
170	p_z = 0.0;
171	psize = particles(1:number_of_particles)%dvrp_psize
172	p_x = particles(1:number_of_particles)%x * superelevation_x
173	p_y = particles(1:number_of_particles)%y * superelevation_y
174	p_z = particles(1:number_of_particles)%z * superelevation
175	p_c = particles(1:number_of_particles)%color
176	ELSE
177	!
178	!-- Particles have a tail
179	WRITE (9,*) '--- before ALLOCATE simtime=',simulated_time,' #of_tails=', number_of_tails, &
180	' max#of_tp=', maximum_number_of_tailpoints
181	#if defined( __ibm )
182	CALL FLUSH_( 9 )
183	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
184	CALL FLUSH( 9 )
185	#endif
186	ALLOCATE( psize(number_of_tails), p_t(number_of_tails), &
187	p_c(number_of_tails*maximum_number_of_tailpoints), &
188	p_x(number_of_tails*maximum_number_of_tailpoints), &
189	p_y(number_of_tails*maximum_number_of_tailpoints), &
190	p_z(number_of_tails*maximum_number_of_tailpoints) )
191	WRITE (9,*) '--- after ALLOCATE'
192	#if defined( __ibm )
193	CALL FLUSH_( 9 )
194	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
195	CALL FLUSH( 9 )
196	#endif
197	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
198	p_z = 0.0;
199	i = 0
200	k = 0
201	DO n = 1, number_of_particles
202	nn = particles(n)%tail_id
203	IF ( nn /= 0 ) THEN
204	k = k + 1
205	IF ( simulated_time > 1338.0 ) THEN
206	WRITE (9,*) '--- particle ',n,' tail_id=',nn,' #of_tp=',particles(n)%tailpoints
207	#if defined( __ibm )
208	CALL FLUSH_( 9 )
209	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
210	CALL FLUSH( 9 )
211	#endif
212	ENDIF
213	DO j = 1, particles(n)%tailpoints
214	i = i + 1
215	p_x(i) = particle_tail_coordinates(j,1,nn) * &
216	superelevation_x
217	p_y(i) = particle_tail_coordinates(j,2,nn) * &
218	superelevation_y
219	p_z(i) = particle_tail_coordinates(j,3,nn) * &
220	superelevation
221	p_c(i) = particle_tail_coordinates(j,4,nn)
222	IF ( simulated_time > 1338.0 ) THEN
223	WRITE (9,*) '--- tp= ',i,' x=',p_x(i),' y=',p_y(i), &
224	' z=',p_z(i),' c=',p_c(i)
225	#if defined( __ibm )
226	CALL FLUSH_( 9 )
227	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
228	CALL FLUSH( 9 )
229	#endif
230	ENDIF
231	ENDDO
232	psize(k) = particles(n)%dvrp_psize
233	p_t(k) = particles(n)%tailpoints - 1
234	IF ( simulated_time > 1338.0 ) THEN
235	WRITE (9,*) '--- t= ',k,' psize=',psize(k),' p_t=',p_t(k)
236	#if defined( __ibm )
237	CALL FLUSH_( 9 )
238	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
239	CALL FLUSH( 9 )
240	#endif
241	ENDIF
242	ENDIF
243	ENDDO
244	WRITE (9,*) '--- after locally storing the particle attributes'
245	#if defined( __ibm )
246	CALL FLUSH_( 9 )
247	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
248	CALL FLUSH( 9 )
249	#endif
250	ENDIF
251
252	!
253	!-- Compute and plot particles in dvr-format
254	IF ( uniform_particles .AND. .NOT. use_particle_tails ) THEN
255	!
256	!-- All particles have the same color. Use simple routine to set
257	!-- the particle attributes (produces less output data)
258	CALL DVRP_PARTICLES( m-1, p_x, p_y, p_z, psize )
259	ELSE
260	!
261	!-- Set color definitions
262	CALL user_dvrp_coltab( 'particles', 'none' )
263
264	CALL DVRP_COLORTABLE_HLS( m-1, 0, interval_values_dvrp, &
265	interval_h_dvrp, interval_l_dvrp, &
266	interval_s_dvrp, interval_a_dvrp )
267
268	IF ( .NOT. use_particle_tails ) THEN
269	CALL DVRP_PARTICLES( m-1, number_of_particles, p_x, p_y, p_z, &
270	3, psize, p_c, p_t )
271	ELSE
272	WRITE (9,*) '--- before DVRP_PARTICLES'
273	#if defined( __ibm )
274	CALL FLUSH_( 9 )
275	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
276	CALL FLUSH( 9 )
277	#endif
278	CALL DVRP_PARTICLES( m-1, number_of_tails, p_x, p_y, p_z, 15, &
279	psize, p_c, p_t )
280	WRITE (9,*) '--- after DVRP_PARTICLES'
281	#if defined( __ibm )
282	CALL FLUSH_( 9 )
283	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
284	CALL FLUSH( 9 )
285	#endif
286	ENDIF
287	ENDIF
288
289	CALL DVRP_VISUALIZE( m-1, 3, dvrp_filecount )
290	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende particles'
291	#if defined( __ibm )
292	CALL FLUSH_( 9 )
293	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
294	CALL FLUSH( 9 )
295	#endif
296
297	DEALLOCATE( psize, p_c, p_t, p_x, p_y, p_z )
298
299	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'stop' )
300	#endif
301
302
303	ELSEIF ( ( mode_dvrp(m)(1:10) == 'isosurface' .OR. &
304	mode_dvrp(m)(1:6) == 'slicer' ) &
305	.AND. output_variable /= ' ' ) THEN
306
307	!
308	!-- Create an intermediate array, properly dimensioned for plot-output
309	ALLOCATE( local_pf(nxl:nxr+1,nys:nyn+1,nzb:nz_do3d) )
310
311	!
312	!-- Move original array to intermediate array
313	SELECT CASE ( output_variable )
314
315	CASE ( 'u', 'u_xy', 'u_xz', 'u_yz' )
316	DO i = nxl, nxr+1
317	DO j = nys, nyn+1
318	DO k = nzb, nz_do3d
319	local_pf(i,j,k) = u(k,j,i)
320	ENDDO
321	ENDDO
322	ENDDO
323	!
324	!-- Replace mirrored values at lower surface by real surface values
325	IF ( output_variable == 'u_xz' .OR. &
326	output_variable == 'u_yz' ) THEN
327	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
328	ENDIF
329
330
331	CASE ( 'v', 'v_xy', 'v_xz', 'v_yz' )
332	DO i = nxl, nxr+1
333	DO j = nys, nyn+1
334	DO k = nzb, nz_do3d
335	local_pf(i,j,k) = v(k,j,i)
336	ENDDO
337	ENDDO
338	ENDDO
339	!
340	!-- Replace mirrored values at lower surface by real surface values
341	IF ( output_variable == 'v_xz' .OR. &
342	output_variable == 'v_yz' ) THEN
343	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
344	ENDIF
345
346	CASE ( 'w', 'w_xy', 'w_xz', 'w_yz' )
347	DO i = nxl, nxr+1
348	DO j = nys, nyn+1
349	DO k = nzb, nz_do3d
350	local_pf(i,j,k) = w(k,j,i)
351	ENDDO
352	ENDDO
353	ENDDO
354
355	CASE ( 'p', 'p_xy', 'p_xz', 'p_yz' )
356	DO i = nxl, nxr+1
357	DO j = nys, nyn+1
358	DO k = nzb, nz_do3d
359	local_pf(i,j,k) = p(k,j,i)
360	ENDDO
361	ENDDO
362	ENDDO
363
364	CASE ( 'pt', 'pt_xy', 'pt_xz', 'pt_yz' )
365	IF ( .NOT. cloud_physics ) THEN
366	DO i = nxl, nxr+1
367	DO j = nys, nyn+1
368	DO k = nzb, nz_do3d
369	local_pf(i,j,k) = pt(k,j,i)
370	ENDDO
371	ENDDO
372	ENDDO
373	ELSE
374	DO i = nxl, nxr+1
375	DO j = nys, nyn+1
376	DO k = nzb, nz_do3d
377	local_pf(i,j,k) = pt(k,j,i) + l_d_cp * pt_d_t(k) * &
378	ql(k,j,i)
379	ENDDO
380	ENDDO
381	ENDDO
382	ENDIF
383
384	CASE ( 'q', 'q_xy', 'q_xz', 'q_yz' )
385	IF ( moisture .OR. passive_scalar ) THEN
386	DO i = nxl, nxr+1
387	DO j = nys, nyn+1
388	DO k = nzb, nz_do3d
389	local_pf(i,j,k) = q(k,j,i)
390	ENDDO
391	ENDDO
392	ENDDO
393	ELSE
394	IF ( myid == 0 ) THEN
395	PRINT*, '+++ data_output_dvrp: if moisture/passive_scalar = ', &
396	'FALSE output of ', output_variable, &
397	'is not provided'
398	ENDIF
399	ENDIF
400
401	CASE ( 'ql', 'ql_xy', 'ql_xz', 'ql_yz' )
402	IF ( cloud_physics .OR. cloud_droplets ) THEN
403	DO i = nxl, nxr+1
404	DO j = nys, nyn+1
405	DO k = nzb, nz_do3d
406	local_pf(i,j,k) = ql(k,j,i)
407	ENDDO
408	ENDDO
409	ENDDO
410	ELSE
411	IF ( myid == 0 ) THEN
412	PRINT*, '+++ data_output_dvrp: if cloud_physics = FALSE ', &
413	'output of ', output_variable, 'is not provided'
414	ENDIF
415	ENDIF
416
417	CASE ( 'u*_xy' )
418	DO i = nxl, nxr+1
419	DO j = nys, nyn+1
420	local_pf(i,j,nzb+1) = us(j,i)
421	ENDDO
422	ENDDO
423	slicer_position = zu(nzb+1)
424
425	CASE ( 't*_xy' )
426	DO i = nxl, nxr+1
427	DO j = nys, nyn+1
428	local_pf(i,j,nzb+1) = ts(j,i)
429	ENDDO
430	ENDDO
431	slicer_position = zu(nzb+1)
432
433
434	CASE DEFAULT
435	IF ( myid == 0 ) THEN
436	PRINT*,'+++ data_output_dvrp: no output possible for: ', &
437	output_variable
438	ENDIF
439
440	END SELECT
441
442
443	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
444
445	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang isosurface'
446	#if defined( __ibm )
447	CALL FLUSH_( 9 )
448	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
449	CALL FLUSH( 9 )
450	#endif
451	!
452	!-- DVRP-Calls for plotting isosurfaces:
453	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'start' )
454
455	!
456	!-- Definition of characteristics of isosurface material
457	!-- Preliminary settings for w!
458	IF ( output_variable == 'w' ) THEN
459	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.3, 0.8, 0.3, 0.0 )
460	ELSE
461	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.9, 0.9, 0.9, 0.0 )
462	ENDIF
463
464	!
465	!-- Compute and plot isosurface in dvr-format
466	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
467	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
468	CALL DVRP_THRESHOLD( m-1, threshold(tv) )
469	CALL DVRP_VISUALIZE( m-1, 1, dvrp_filecount )
470	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende isosurface'
471	#if defined( __ibm )
472	CALL FLUSH_( 9 )
473	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
474	CALL FLUSH( 9 )
475	#endif
476
477	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'stop' )
478
479	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
480
481	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang slicer'
482	#if defined( __ibm )
483	CALL FLUSH_( 9 )
484	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
485	CALL FLUSH( 9 )
486	#endif
487	!
488	!-- DVRP-Calls for plotting slicers:
489	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'start' )
490
491	!
492	!-- Material and color definitions
493	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.0, 0.0, 0.0, 0.0 )
494
495	islice_dvrp = islice_dvrp + 1
496	! CALL DVRP_COLORFUNCTION( m-1, DVRP_CM_HLS, 25, &
497	! slicer_range_limits_dvrp(:,islice_dvrp), &
498	! color_dvrp )
499
500	CALL user_dvrp_coltab( 'slicer', output_variable )
501
502	CALL DVRP_COLORTABLE_HLS( m-1, 1, interval_values_dvrp, &
503	interval_h_dvrp, interval_l_dvrp, &
504	interval_s_dvrp, interval_a_dvrp )
505
506	!
507	!-- Compute and plot slicer in dvr-format
508	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
509	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
510	CALL DVRP_SLICER( m-1, section_mode, slicer_position )
511	CALL DVRP_VISUALIZE( m-1, 2, dvrp_filecount )
512
513	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'stop' )
514
515	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende slicer'
516	#if defined( __ibm )
517	CALL FLUSH_( 9 )
518	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
519	CALL FLUSH( 9 )
520	#endif
521	ENDIF
522
523	DEALLOCATE( local_pf )
524
525	ENDIF
526
527	m = m + 1
528
529	ENDDO
530
531	dvrp_filecount = dvrp_filecount + 1
532
533	CALL cpu_log( log_point(27), 'data_output_dvrp', 'stop' )
534	WRITE ( 9, * ) '*** myid=', myid, ' Ende data_output_dvrp'
535	#if defined( __ibm )
536	CALL FLUSH_( 9 )
537	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
538	CALL FLUSH( 9 )
539	#endif
540
541	#endif
542	END SUBROUTINE data_output_dvrp

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |