Home

Context Navigation

source: palm/trunk/SOURCE/data_output_dvrp.f90 @ 331

Last change on this file since 331 was 287, checked in by raasch, 16 years ago
bugfix concerning dvr
Property svn:keywords set to `Id`
File size: 23.7 KB

Rev	Line
[1]	1	MODULE dvrp_color
	2
	3	USE dvrp_variables
	4
	5	IMPLICIT NONE
	6
	7	CONTAINS
	8
	9	SUBROUTINE color_dvrp( value, color )
	10
	11	REAL, INTENT(IN) :: value
	12	REAL, INTENT(OUT) :: color(4)
	13
	14	REAL :: scale
	15
	16	scale = ( value - slicer_range_limits_dvrp(1,islice_dvrp) ) / &
	17	( slicer_range_limits_dvrp(2,islice_dvrp) - &
	18	slicer_range_limits_dvrp(1,islice_dvrp) )
	19
	20	scale = MODULO( 180.0 + 180.0 * scale, 360.0 )
	21
	22	color = (/ scale, 0.5, 1.0, 0.0 /)
	23
	24	END SUBROUTINE color_dvrp
	25
	26	END MODULE dvrp_color
	27
	28
	29	RECURSIVE SUBROUTINE data_output_dvrp
	30
	31	!------------------------------------------------------------------------------!
[254]	32	! Current revisions:
[1]	33	! -----------------
[264]	34	! Clipping of dvr-output implemented, using a default colourtable for
	35	! particles,
[262]	36	! output of messages replaced by message handling routine.
[86]	37	! TEST: different colours for isosurfaces
[1]	38	!
	39	! Former revisions:
	40	! -----------------
[3]	41	! $Id: data_output_dvrp.f90 287 2009-04-09 08:59:36Z raasch $
[77]	42	!
[226]	43	! 210 2008-11-06 08:54:02Z raasch
	44	! DVRP arguments changed to single precision, mode pathlines added
	45	!
[139]	46	! 130 2007-11-13 14:08:40Z letzel
	47	! allow two instead of one digit to specify isosurface and slicer variables
	48	! for unknown variables (CASE DEFAULT) call new subroutine
	49	! user_data_output_dvrp
	50	!
[83]	51	! 82 2007-04-16 15:40:52Z raasch
	52	! Preprocessor strings for different linux clusters changed to "lc",
	53	! routine local_flush is used for buffer flushing
	54	!
[77]	55	! 75 2007-03-22 09:54:05Z raasch
	56	! Particles-package is now part of the default code,
	57	! moisture renamed humidity
	58	!
[3]	59	! RCS Log replace by Id keyword, revision history cleaned up
	60	!
[1]	61	! Revision 1.13 2006/02/23 10:25:12 raasch
	62	! Former routine plot_dvrp renamed data_output_dvrp,
	63	! Only a fraction of the particles may have a tail,
	64	! pl.. replaced by do.., %size renamed %dvrp_psize
	65	!
	66	! Revision 1.1 2000/04/27 06:27:17 raasch
	67	! Initial revision
	68	!
	69	!
	70	! Description:
	71	! ------------
	72	! Plot of isosurface, particles and slicers with dvrp-software
	73	!------------------------------------------------------------------------------!
	74	#if defined( __dvrp_graphics )
	75
	76	USE arrays_3d
	77	USE cloud_parameters
[210]	78	USE constants
[246]	79	USE control_parameters
[1]	80	USE cpulog
	81	USE DVRP
	82	USE dvrp_color
	83	USE dvrp_variables
	84	USE grid_variables
	85	USE indices
	86	USE interfaces
	87	USE particle_attributes
	88	USE pegrid
	89
	90	IMPLICIT NONE
	91
	92	CHARACTER (LEN=2) :: section_chr
	93	CHARACTER (LEN=6) :: output_variable
[242]	94	INTEGER :: c_mode, c_size_x, c_size_y, c_size_z, dvrp_nop, dvrp_not, &
[287]	95	gradient_normals, i, ip, j, jp, k, l, m, n, n_isosurface, &
[284]	96	n_slicer, nn, section_mode, vn
[1]	97	INTEGER, DIMENSION(:), ALLOCATABLE :: p_c, p_t
[242]	98
	99	LOGICAL, DIMENSION(:), ALLOCATABLE :: dvrp_mask
	100
[287]	101	REAL(4) :: slicer_position, tmp_alpha, tmp_alpha_w, tmp_b, tmp_c_alpha, &
	102	tmp_g, tmp_norm, tmp_pos, tmp_r, tmp_t, tmp_th
[210]	103	REAL(4), DIMENSION(:), ALLOCATABLE :: psize, p_x, p_y, p_z
	104	REAL(4), DIMENSION(:,:,:), ALLOCATABLE :: local_pf
	105	REAL(4), DIMENSION(:,:,:,:), ALLOCATABLE :: local_pfi
[1]	106
	107
	108	CALL cpu_log( log_point(27), 'data_output_dvrp', 'start' )
	109
	110	!
	111	!-- Loop over all output modes choosed
[284]	112	m = 1
	113	n_isosurface = 0 ! isosurface counter (for threshold values and color)
	114	n_slicer = 0 ! slice plane counter (for range of values)
[1]	115	DO WHILE ( mode_dvrp(m) /= ' ' )
	116	!
	117	!-- Update of the steering variables
	118	IF ( .NOT. lock_steering_update ) THEN
	119	!
	120	!-- Set lock to avoid recursive calls of DVRP_STEERING_UPDATE
	121	lock_steering_update = .TRUE.
[210]	122	! CALL DVRP_STEERING_UPDATE( m-1, data_output_dvrp )
[1]	123	lock_steering_update = .FALSE.
	124	ENDIF
	125
	126	!
	127	!-- Determine the variable which shall be plotted (in case of slicers or
	128	!-- isosurfaces)
	129	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
[130]	130	READ ( mode_dvrp(m), '(10X,I2)' ) vn
[1]	131	output_variable = do3d(0,vn)
[284]	132	n_isosurface = n_isosurface + 1
[1]	133	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
[130]	134	READ ( mode_dvrp(m), '(6X,I2)' ) vn
[1]	135	output_variable = do2d(0,vn)
	136	l = MAX( 2, LEN_TRIM( do2d(0,vn) ) )
	137	section_chr = do2d(0,vn)(l-1:l)
	138	SELECT CASE ( section_chr )
	139	CASE ( 'xy' )
	140	section_mode = 2
	141	slicer_position = zu(MIN( slicer_position_dvrp(m), nz_do3d ))
	142	CASE ( 'xz' )
	143	section_mode = 1
	144	slicer_position = slicer_position_dvrp(m) * dy
	145	CASE ( 'yz' )
	146	section_mode = 0
	147	slicer_position = slicer_position_dvrp(m) * dx
	148	END SELECT
	149	ENDIF
	150
	151	!
	152	!-- Select the plot mode (in case of isosurface or slicer only if user has
	153	!-- defined a variable which shall be plotted; otherwise do nothing)
[86]	154	IF ( mode_dvrp(m)(1:9) == 'particles' .AND. particle_advection .AND. &
	155	simulated_time >= particle_advection_start ) THEN
[1]	156	!
	157	!-- DVRP-Calls for plotting particles:
	158	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'start' )
	159
	160	!
	161	!-- Definition of characteristics of particle material
[210]	162	! tmp_r = 0.1; tmp_g = 0.7; tmp_b = 0.1; tmp_t = 0.0
	163	tmp_r = 0.0; tmp_g = 0.0; tmp_b = 0.0; tmp_t = 0.0
	164	CALL DVRP_MATERIAL_RGB( m-1, 1, tmp_r, tmp_g, tmp_b, tmp_t )
[1]	165
	166	!
[242]	167	!-- If clipping is active and if this subdomain is clipped, find out the
	168	!-- number of particles and tails to be plotted; otherwise, all
[246]	169	!-- particles/tails are plotted. dvrp_mask is used to mark the partikles.
[264]	170	ALLOCATE( dvrp_mask(number_of_particles) )
	171
[242]	172	IF ( dvrp_total_overlap ) THEN
[264]	173	dvrp_mask = .TRUE.
	174	dvrp_nop = number_of_particles
	175	dvrp_not = number_of_tails
[242]	176	ELSE
[264]	177	dvrp_mask = .FALSE.
	178	dvrp_nop = 0
	179	dvrp_not = 0
[242]	180	IF ( dvrp_overlap ) THEN
	181	IF ( .NOT. use_particle_tails ) THEN
	182	DO n = 1, number_of_particles
	183	ip = particles(n)%x / dx
	184	jp = particles(n)%y / dy
	185	IF ( ip >= nxl_dvrp .AND. ip <= nxr_dvrp .AND. &
	186	jp >= nys_dvrp .AND. jp <= nyn_dvrp ) THEN
	187	dvrp_nop = dvrp_nop + 1
[264]	188	dvrp_mask(n) = .TRUE.
[242]	189	ENDIF
	190	ENDDO
	191	ELSE
	192	k = 0
	193	DO n = 1, number_of_particles
	194	IF ( particles(n)%tail_id /= 0 ) THEN
	195	k = k + 1
	196	ip = particles(n)%x / dx
	197	jp = particles(n)%y / dy
	198	IF ( ip >= nxl_dvrp .AND. ip <= nxr_dvrp .AND. &
	199	jp >= nys_dvrp .AND. jp <= nyn_dvrp ) THEN
	200	dvrp_not = dvrp_not + 1
[264]	201	dvrp_mask(n) = .TRUE.
[242]	202	ENDIF
	203	ENDIF
	204	ENDDO
	205	ENDIF
	206	ENDIF
	207	ENDIF
	208
	209	!
[1]	210	!-- Move particle coordinates to one-dimensional arrays
	211	IF ( .NOT. use_particle_tails ) THEN
	212	!
	213	!-- All particles are output
[242]	214	ALLOCATE( psize(dvrp_nop), p_t(dvrp_nop), p_c(dvrp_nop), &
	215	p_x(dvrp_nop), p_y(dvrp_nop), p_z(dvrp_nop) )
[1]	216	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
[242]	217	p_z = 0.0
	218	k = 0
	219	DO n = 1, number_of_particles
	220	IF ( dvrp_mask(n) ) THEN
	221	k = k + 1
	222	psize(k) = particles(n)%dvrp_psize
	223	p_x(k) = particles(n)%x * superelevation_x
	224	p_y(k) = particles(n)%y * superelevation_y
	225	p_z(k) = particles(n)%z * superelevation
	226	p_c(k) = particles(n)%color
	227	ENDIF
	228	ENDDO
[1]	229	ELSE
	230	!
	231	!-- Particles have a tail
[242]	232	ALLOCATE( psize(dvrp_not), p_t(dvrp_not), &
	233	p_c(dvrp_not*maximum_number_of_tailpoints), &
	234	p_x(dvrp_not*maximum_number_of_tailpoints), &
	235	p_y(dvrp_not*maximum_number_of_tailpoints), &
	236	p_z(dvrp_not*maximum_number_of_tailpoints) )
[1]	237	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
	238	p_z = 0.0;
	239	i = 0
	240	k = 0
[264]	241
[1]	242	DO n = 1, number_of_particles
	243	nn = particles(n)%tail_id
[242]	244	IF ( nn /= 0 .AND. dvrp_mask(n) ) THEN
[1]	245	k = k + 1
	246	DO j = 1, particles(n)%tailpoints
	247	i = i + 1
	248	p_x(i) = particle_tail_coordinates(j,1,nn) * &
	249	superelevation_x
	250	p_y(i) = particle_tail_coordinates(j,2,nn) * &
	251	superelevation_y
	252	p_z(i) = particle_tail_coordinates(j,3,nn) * &
	253	superelevation
	254	p_c(i) = particle_tail_coordinates(j,4,nn)
	255	ENDDO
	256	psize(k) = particles(n)%dvrp_psize
	257	p_t(k) = particles(n)%tailpoints - 1
	258	ENDIF
	259	ENDDO
	260	ENDIF
	261
	262	!
	263	!-- Compute and plot particles in dvr-format
	264	IF ( uniform_particles .AND. .NOT. use_particle_tails ) THEN
	265	!
	266	!-- All particles have the same color. Use simple routine to set
	267	!-- the particle attributes (produces less output data)
	268	CALL DVRP_PARTICLES( m-1, p_x, p_y, p_z, psize )
	269	ELSE
	270	!
	271	!-- Set color definitions
	272	CALL user_dvrp_coltab( 'particles', 'none' )
	273
[264]	274	CALL DVRP_COLORTABLE_HLS( m-1, 0, interval_values_dvrp_prt, &
	275	interval_h_dvrp_prt, &
	276	interval_l_dvrp_prt, &
	277	interval_s_dvrp_prt, &
	278	interval_a_dvrp_prt )
[1]	279
	280	IF ( .NOT. use_particle_tails ) THEN
[242]	281	CALL DVRP_PARTICLES( m-1, dvrp_nop, p_x, p_y, p_z, 3, psize, &
	282	p_c, p_t )
[1]	283	ELSE
[242]	284	CALL DVRP_PARTICLES( m-1, dvrp_not, p_x, p_y, p_z, 15, psize, &
	285	p_c, p_t )
[1]	286	ENDIF
	287	ENDIF
	288
	289	CALL DVRP_VISUALIZE( m-1, 3, dvrp_filecount )
	290
[242]	291	DEALLOCATE( dvrp_mask, psize, p_c, p_t, p_x, p_y, p_z )
[1]	292
	293	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'stop' )
	294
	295
	296	ELSEIF ( ( mode_dvrp(m)(1:10) == 'isosurface' .OR. &
	297	mode_dvrp(m)(1:6) == 'slicer' ) &
	298	.AND. output_variable /= ' ' ) THEN
	299
	300	!
	301	!-- Create an intermediate array, properly dimensioned for plot-output
[246]	302	ALLOCATE( local_pf(nxl_dvrp:nxr_dvrp+1,nys_dvrp:nyn_dvrp+1, &
	303	nzb:nz_do3d) )
[1]	304
	305	!
	306	!-- Move original array to intermediate array
[246]	307	IF ( dvrp_overlap ) THEN
[1]	308
[246]	309	SELECT CASE ( output_variable )
	310
	311	CASE ( 'u', 'u_xy', 'u_xz', 'u_yz' )
	312	DO i = nxl_dvrp, nxr_dvrp+1
	313	DO j = nys_dvrp, nyn_dvrp+1
	314	DO k = nzb, nz_do3d
	315	local_pf(i,j,k) = u(k,j,i)
	316	ENDDO
[1]	317	ENDDO
	318	ENDDO
	319	!
[246]	320	!-- Replace mirrored values at lower surface by real surface
	321	!-- values
	322	IF ( output_variable == 'u_xz' .OR. &
	323	output_variable == 'u_yz' ) THEN
	324	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
	325	ENDIF
[1]	326
	327
[246]	328	CASE ( 'v', 'v_xy', 'v_xz', 'v_yz' )
	329	DO i = nxl_dvrp, nxr_dvrp+1
	330	DO j = nys_dvrp, nyn_dvrp+1
	331	DO k = nzb, nz_do3d
	332	local_pf(i,j,k) = v(k,j,i)
	333	ENDDO
[1]	334	ENDDO
	335	ENDDO
	336	!
[246]	337	!-- Replace mirrored values at lower surface by real surface
	338	!-- values
	339	IF ( output_variable == 'v_xz' .OR. &
	340	output_variable == 'v_yz' ) THEN
	341	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
	342	ENDIF
[1]	343
[246]	344	CASE ( 'w', 'w_xy', 'w_xz', 'w_yz' )
	345	DO i = nxl_dvrp, nxr_dvrp+1
	346	DO j = nys_dvrp, nyn_dvrp+1
	347	DO k = nzb, nz_do3d
	348	local_pf(i,j,k) = w(k,j,i)
	349	ENDDO
[1]	350	ENDDO
	351	ENDDO
[106]	352	! Averaging for Langmuir circulation
[246]	353	! DO k = nzb, nz_do3d
	354	! DO j = nys_dvrp+1, nyn_dvrp
	355	! DO i = nxl_dvrp, nxr_dvrp+1
	356	! local_pf(i,j,k) = 0.25 * local_pf(i,j-1,k) + &
	357	! 0.50 * local_pf(i,j,k) + &
	358	! 0.25 * local_pf(i,j+1,k)
	359	! ENDDO
[106]	360	! ENDDO
	361	! ENDDO
[1]	362
[246]	363	CASE ( 'p', 'p_xy', 'p_xz', 'p_yz' )
	364	DO i = nxl_dvrp, nxr_dvrp+1
	365	DO j = nys_dvrp, nyn_dvrp+1
	366	DO k = nzb, nz_do3d
	367	local_pf(i,j,k) = p(k,j,i)
	368	ENDDO
[1]	369	ENDDO
	370	ENDDO
	371
[246]	372	CASE ( 'pt', 'pt_xy', 'pt_xz', 'pt_yz' )
	373	IF ( .NOT. cloud_physics ) THEN
	374	DO i = nxl_dvrp, nxr_dvrp+1
	375	DO j = nys_dvrp, nyn_dvrp+1
	376	DO k = nzb, nz_do3d
	377	local_pf(i,j,k) = pt(k,j,i)
	378	ENDDO
[1]	379	ENDDO
	380	ENDDO
[246]	381	ELSE
	382	DO i = nxl_dvrp, nxr_dvrp+1
	383	DO j = nys_dvrp, nyn_dvrp+1
	384	DO k = nzb, nz_do3d
	385	local_pf(i,j,k) = pt(k,j,i) + l_d_cp * &
	386	pt_d_t(k) * ql(k,j,i)
	387	ENDDO
[1]	388	ENDDO
	389	ENDDO
[246]	390	ENDIF
[1]	391
[246]	392	CASE ( 'q', 'q_xy', 'q_xz', 'q_yz' )
	393	IF ( humidity .OR. passive_scalar ) THEN
	394	DO i = nxl_dvrp, nxr_dvrp+1
	395	DO j = nys_dvrp, nyn_dvrp+1
	396	DO k = nzb, nz_do3d
	397	local_pf(i,j,k) = q(k,j,i)
	398	ENDDO
[1]	399	ENDDO
[246]	400	ENDDO
[254]	401	ELSE
[274]	402	message_string = 'if humidity/passive_scalar = ' // &
	403	'FALSE output of ' // TRIM( output_variable ) // &
	404	'is not provided'
	405	CALL message( 'data_output_dvrp', 'PA0183',&
	406	0, 0, 0, 6, 0 )
[1]	407	ENDIF
	408
[246]	409	CASE ( 'ql', 'ql_xy', 'ql_xz', 'ql_yz' )
	410	IF ( cloud_physics .OR. cloud_droplets ) THEN
	411	DO i = nxl_dvrp, nxr_dvrp+1
	412	DO j = nys_dvrp, nyn_dvrp+1
	413	DO k = nzb, nz_do3d
	414	local_pf(i,j,k) = ql(k,j,i)
	415	ENDDO
[1]	416	ENDDO
	417	ENDDO
[254]	418	ELSE
[274]	419	message_string = 'if cloud_physics = FALSE ' // &
	420	'output of ' // TRIM( output_variable) // &
	421	'is not provided'
	422	CALL message( 'data_output_dvrp', 'PA0184',&
	423	0, 0, 0, 6, 0 )
[1]	424	ENDIF
	425
[246]	426	CASE ( 'u*_xy' )
	427	DO i = nxl_dvrp, nxr_dvrp+1
	428	DO j = nys_dvrp, nyn_dvrp+1
	429	local_pf(i,j,nzb+1) = us(j,i)
	430	ENDDO
[1]	431	ENDDO
[246]	432	slicer_position = zu(nzb+1)
[1]	433
[246]	434	CASE ( 't*_xy' )
	435	DO i = nxl_dvrp, nxr_dvrp+1
	436	DO j = nys_dvrp, nyn_dvrp+1
	437	local_pf(i,j,nzb+1) = ts(j,i)
	438	ENDDO
[1]	439	ENDDO
[246]	440	slicer_position = zu(nzb+1)
[1]	441
	442
[246]	443	CASE DEFAULT
[130]	444	!
[246]	445	!-- The DEFAULT case is reached either if output_variable
	446	!-- contains unsupported variable or if the user has coded a
	447	!-- special case in the user interface. There, the subroutine
	448	!-- user_data_output_dvrp checks which of these two conditions
	449	!-- applies.
	450	CALL user_data_output_dvrp( output_variable, local_pf )
[1]	451
[130]	452
[246]	453	END SELECT
[1]	454
[264]	455	ELSE
	456	!
	457	!-- No overlap of clipping domain with the current subdomain
	458	DO i = nxl_dvrp, nxr_dvrp+1
	459	DO j = nys_dvrp, nyn_dvrp+1
	460	DO k = nzb, nz_do3d
	461	local_pf(i,j,k) = 0.0
	462	ENDDO
	463	ENDDO
	464	ENDDO
	465
[246]	466	ENDIF
[1]	467
	468	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
[264]	469	WRITE(9,*) '#8'
	470	CALL local_flush( 9 )
[1]	471	!
	472	!-- DVRP-Calls for plotting isosurfaces:
	473	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'start' )
	474
	475	!
[284]	476	!-- Definition of isosurface color
	477	tmp_r = isosurface_color(1,n_isosurface)
	478	tmp_g = isosurface_color(2,n_isosurface)
	479	tmp_b = isosurface_color(3,n_isosurface)
	480	tmp_t = 0.0
	481	CALL DVRP_MATERIAL_RGB( m-1, 1, tmp_r, tmp_g, tmp_b, tmp_t )
[1]	482
	483	!
	484	!-- Compute and plot isosurface in dvr-format
	485	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
	486	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
[264]	487	WRITE(9,*) '#8.2'
	488	CALL local_flush( 9 )
[210]	489
	490	c_size_x = vc_size_x; c_size_y = vc_size_y; c_size_z = vc_size_z
	491	CALL DVRP_CLUSTER_SIZE( m-1, c_size_x, c_size_y, c_size_z )
[264]	492	WRITE(9,*) '#8.3'
	493	CALL local_flush( 9 )
[210]	494
	495	c_mode = vc_mode
	496	CALL DVRP_CLUSTERING_MODE( m-1, c_mode )
[264]	497	WRITE(9,*) '#8.4'
	498	CALL local_flush( 9 )
[210]	499
	500	gradient_normals = vc_gradient_normals
	501	CALL DVRP_GRADIENTNORMALS( m-1, gradient_normals )
[264]	502	WRITE(9,*) '#8.5'
	503	CALL local_flush( 9 )
[210]	504	!
	505	!-- A seperate procedure for setting vc_alpha will be in the next
	506	!-- version of libDVRP
	507	tmp_c_alpha = vc_alpha
	508	CALL DVRP_THRESHOLD( -(m-1)-1, tmp_c_alpha )
[264]	509	WRITE(9,*) '#8.6'
	510	CALL local_flush( 9 )
[210]	511
[246]	512	IF ( dvrp_overlap ) THEN
[284]	513	tmp_th = threshold(n_isosurface)
[246]	514	ELSE
	515	tmp_th = 1.0 ! nothing is plotted because array values are 0
	516	ENDIF
[264]	517	WRITE(9,*) '#8.7'
	518	CALL local_flush( 9 )
[246]	519
[210]	520	CALL DVRP_THRESHOLD( m-1, tmp_th )
[264]	521	WRITE(9,*) '#8.8'
	522	WRITE(9,*) 'nxl_dvrp=',nxl_dvrp, ' nxl=',nxl
	523	WRITE(9,*) 'nxr_dvrp=',nxr_dvrp, ' nxr=',nxr
	524	WRITE(9,*) 'nys_dvrp=',nys_dvrp, ' nys=',nys
	525	WRITE(9,*) 'nyn_dvrp=',nyn_dvrp, ' nyn=',nyn
	526	CALL local_flush( 9 )
[210]	527	CALL DVRP_VISUALIZE( m-1, 21, dvrp_filecount )
[264]	528	WRITE(9,*) '#8.9'
	529	CALL local_flush( 9 )
[210]	530
[1]	531	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'stop' )
[264]	532	WRITE(9,*) '#9'
	533	CALL local_flush( 9 )
[1]	534
	535	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
[264]	536	WRITE(9,*) '#10'
	537	CALL local_flush( 9 )
[1]	538	!
	539	!-- DVRP-Calls for plotting slicers:
	540	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'start' )
	541
	542	!
	543	!-- Material and color definitions
[210]	544	tmp_r = 0.0; tmp_g = 0.0; tmp_b = 0.0; tmp_t = 0.0
	545	CALL DVRP_MATERIAL_RGB( m-1, 1, tmp_r, tmp_g, tmp_b, tmp_t )
[1]	546
[284]	547	n_slicer = n_slicer + 1
	548
	549	!
	550	!-- Using dolorfunction has not been properly tested
	551	! islice_dvrp = n_slicer
	552	! CALL DVRP_COLORFUNCTION( m-1, DVRP_CM_HLS, 25, &
	553	! slicer_range_limits_dvrp(:,n_slicer), &
[1]	554	! color_dvrp )
	555
[284]	556	!
	557	!-- Set interval of values defining the colortable
	558	CALL set_slicer_attributes_dvrp( n_slicer )
	559
	560	!
	561	!-- Create user-defined colortable
[1]	562	CALL user_dvrp_coltab( 'slicer', output_variable )
	563
	564	CALL DVRP_COLORTABLE_HLS( m-1, 1, interval_values_dvrp, &
	565	interval_h_dvrp, interval_l_dvrp, &
	566	interval_s_dvrp, interval_a_dvrp )
	567
	568	!
	569	!-- Compute and plot slicer in dvr-format
	570	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
	571	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
[262]	572	tmp_pos = slicer_position
	573	CALL DVRP_SLICER( m-1, section_mode, tmp_pos )
	574	! tmp_pos = 1.0
	575	! CALL DVRP_SLICER( m-1, 2, tmp_pos )
[106]	576	WRITE (9,*) 'nx_dvrp=', nx_dvrp
	577	WRITE (9,*) 'ny_dvrp=', ny_dvrp
	578	WRITE (9,*) 'nz_dvrp=', nz_dvrp
	579	WRITE (9,*) 'section_mode=', section_mode
	580	WRITE (9,*) 'slicer_position=', slicer_position
	581	CALL local_flush( 9 )
	582
[1]	583	CALL DVRP_VISUALIZE( m-1, 2, dvrp_filecount )
	584
	585	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'stop' )
[264]	586	WRITE(9,*) '#11'
	587	CALL local_flush( 9 )
[1]	588
	589	ENDIF
	590
	591	DEALLOCATE( local_pf )
	592
[264]	593	WRITE(9,*) '#12'
	594	CALL local_flush( 9 )
[210]	595	ELSEIF ( mode_dvrp(m)(1:9) == 'pathlines' ) THEN
	596
	597	ALLOCATE( local_pfi(4,nxl:nxr+1,nys:nyn+1,nzb:nz_do3d) )
	598	DO i = nxl, nxr+1
	599	DO j = nys, nyn+1
	600	DO k = nzb, nz_do3d
	601	local_pfi(1,i,j,k) = u(k,j,i)
	602	local_pfi(2,i,j,k) = v(k,j,i)
	603	local_pfi(3,i,j,k) = w(k,j,i)
	604	tmp_norm = SQRT( u(k,j,i) * u(k,j,i) + &
	605	v(k,j,i) * v(k,j,i) + &
	606	w(k,j,i) * w(k,j,i) )
	607	tmp_alpha = ACOS( 0.0 * u(k,j,i) / tmp_norm + &
	608	0.0 * v(k,j,i) / tmp_norm - &
	609	1.0 * w(k,j,i) / tmp_norm )
	610	tmp_alpha_w = tmp_alpha / pi * 180.0
	611	local_pfi(4,i,j,k) = tmp_alpha_w
	612	ENDDO
	613	ENDDO
	614	ENDDO
	615
	616	CALL cpu_log( log_point_s(31), 'dvrp_pathlines', 'start' )
	617
	618	CALL DVRP_DATA( m-1, local_pfi, 4, nx_dvrp, ny_dvrp, nz_dvrp, &
	619	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
	620	CALL DVRP_VISUALIZE( m-1, 20, dvrp_filecount )
	621
	622	CALL cpu_log( log_point_s(31), 'dvrp_pathlines', 'stop' )
	623
	624	DEALLOCATE( local_pfi )
	625
[1]	626	ENDIF
	627
	628	m = m + 1
	629
	630	ENDDO
[264]	631	WRITE(9,*) '#13'
	632	CALL local_flush( 9 )
[1]	633
	634	dvrp_filecount = dvrp_filecount + 1
	635
	636	CALL cpu_log( log_point(27), 'data_output_dvrp', 'stop' )
	637
	638	#endif
	639	END SUBROUTINE data_output_dvrp

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |