Home

Context Navigation

source: palm/trunk/SOURCE/data_output_dvrp.f90 @ 23

Last change on this file since 23 was 13, checked in by raasch, 18 years ago
flush calls adjusted
Property svn:keywords set to `Id`
File size: 18.8 KB

Rev	Line
[1]	1	MODULE dvrp_color
	2
	3	USE dvrp_variables
	4
	5	IMPLICIT NONE
	6
	7	CONTAINS
	8
	9	SUBROUTINE color_dvrp( value, color )
	10
	11	REAL, INTENT(IN) :: value
	12	REAL, INTENT(OUT) :: color(4)
	13
	14	REAL :: scale
	15
	16	scale = ( value - slicer_range_limits_dvrp(1,islice_dvrp) ) / &
	17	( slicer_range_limits_dvrp(2,islice_dvrp) - &
	18	slicer_range_limits_dvrp(1,islice_dvrp) )
	19
	20	scale = MODULO( 180.0 + 180.0 * scale, 360.0 )
	21
	22	color = (/ scale, 0.5, 1.0, 0.0 /)
	23
	24	END SUBROUTINE color_dvrp
	25
	26	END MODULE dvrp_color
	27
	28
	29	RECURSIVE SUBROUTINE data_output_dvrp
	30
	31	!------------------------------------------------------------------------------!
	32	! Actual revisions:
	33	! -----------------
	34	! TEST: write statements
	35	!
	36	! Former revisions:
	37	! -----------------
[3]	38	! $Id: data_output_dvrp.f90 13 2007-02-14 12:15:07Z raasch $
	39	! RCS Log replace by Id keyword, revision history cleaned up
	40	!
[1]	41	! Revision 1.13 2006/02/23 10:25:12 raasch
	42	! Former routine plot_dvrp renamed data_output_dvrp,
	43	! Only a fraction of the particles may have a tail,
	44	! pl.. replaced by do.., %size renamed %dvrp_psize
	45	!
	46	! Revision 1.1 2000/04/27 06:27:17 raasch
	47	! Initial revision
	48	!
	49	!
	50	! Description:
	51	! ------------
	52	! Plot of isosurface, particles and slicers with dvrp-software
	53	!------------------------------------------------------------------------------!
	54	#if defined( __dvrp_graphics )
	55
	56	USE arrays_3d
	57	USE cloud_parameters
	58	USE cpulog
	59	USE DVRP
	60	USE dvrp_color
	61	USE dvrp_variables
	62	USE grid_variables
	63	USE indices
	64	USE interfaces
	65	USE particle_attributes
	66	USE pegrid
	67	USE control_parameters
	68
	69	IMPLICIT NONE
	70
	71	CHARACTER (LEN=2) :: section_chr
	72	CHARACTER (LEN=6) :: output_variable
	73	INTEGER :: i, j, k, l, m, n, nn, section_mode, tv, vn
	74	INTEGER, DIMENSION(:), ALLOCATABLE :: p_c, p_t
	75	REAL :: center(3), distance, slicer_position, surface_value
	76	REAL, DIMENSION(:), ALLOCATABLE :: psize, p_x, p_y, p_z
	77	REAL, DIMENSION(:,:,:), ALLOCATABLE :: local_pf
	78
	79
	80	WRITE ( 9, * ) '*** myid=', myid, ' Anfang data_output_dvrp'
[13]	81	#if defined( __ibm )
[1]	82	CALL FLUSH_( 9 )
[13]	83	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	84	CALL FLUSH( 9 )
	85	#endif
[1]	86	CALL cpu_log( log_point(27), 'data_output_dvrp', 'start' )
	87
	88	!
	89	!-- Loop over all output modes choosed
	90	m = 1
	91	tv = 0 ! threshold counter
	92	islice_dvrp = 0 ! slice plane counter
	93	DO WHILE ( mode_dvrp(m) /= ' ' )
	94	!
	95	!-- Update of the steering variables
	96	IF ( .NOT. lock_steering_update ) THEN
	97	!
	98	!-- Set lock to avoid recursive calls of DVRP_STEERING_UPDATE
	99	lock_steering_update = .TRUE.
	100	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: vor steering_update'
[13]	101	#if defined( __ibm )
[1]	102	CALL FLUSH_( 9 )
[13]	103	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	104	CALL FLUSH( 9 )
	105	#endif
[1]	106	CALL DVRP_STEERING_UPDATE( m-1, data_output_dvrp )
	107	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: nach steering_update'
[13]	108	#if defined( __ibm )
[1]	109	CALL FLUSH_( 9 )
[13]	110	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	111	CALL FLUSH( 9 )
	112	#endif
[1]	113	lock_steering_update = .FALSE.
	114	ENDIF
	115
	116	!
	117	!-- Determine the variable which shall be plotted (in case of slicers or
	118	!-- isosurfaces)
	119	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
	120	READ ( mode_dvrp(m), '(10X,I1)' ) vn
	121	output_variable = do3d(0,vn)
	122	tv = tv + 1
	123	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
	124	READ ( mode_dvrp(m), '(6X,I1)' ) vn
	125	output_variable = do2d(0,vn)
	126	l = MAX( 2, LEN_TRIM( do2d(0,vn) ) )
	127	section_chr = do2d(0,vn)(l-1:l)
	128	SELECT CASE ( section_chr )
	129	CASE ( 'xy' )
	130	section_mode = 2
	131	slicer_position = zu(MIN( slicer_position_dvrp(m), nz_do3d ))
	132	CASE ( 'xz' )
	133	section_mode = 1
	134	slicer_position = slicer_position_dvrp(m) * dy
	135	CASE ( 'yz' )
	136	section_mode = 0
	137	slicer_position = slicer_position_dvrp(m) * dx
	138	END SELECT
	139	ENDIF
	140
	141	!
	142	!-- Select the plot mode (in case of isosurface or slicer only if user has
	143	!-- defined a variable which shall be plotted; otherwise do nothing)
	144	IF ( mode_dvrp(m)(1:9) == 'particles' ) THEN
	145
	146	#if defined( __particles )
	147	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang particles'
[13]	148	#if defined( __ibm )
[1]	149	CALL FLUSH_( 9 )
[13]	150	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	151	CALL FLUSH( 9 )
	152	#endif
[1]	153	!
	154	!-- DVRP-Calls for plotting particles:
	155	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'start' )
	156
	157	!
	158	!-- Definition of characteristics of particle material
	159	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.1, 0.7, 0.1, 0.0 )
	160
	161	!
	162	!-- Move particle coordinates to one-dimensional arrays
	163	IF ( .NOT. use_particle_tails ) THEN
	164	!
	165	!-- All particles are output
	166	ALLOCATE( psize(number_of_particles), p_t(number_of_particles), &
	167	p_c(number_of_particles), p_x(number_of_particles), &
	168	p_y(number_of_particles), p_z(number_of_particles) )
	169	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
	170	p_z = 0.0;
	171	psize = particles(1:number_of_particles)%dvrp_psize
	172	p_x = particles(1:number_of_particles)%x * superelevation_x
	173	p_y = particles(1:number_of_particles)%y * superelevation_y
	174	p_z = particles(1:number_of_particles)%z * superelevation
	175	p_c = particles(1:number_of_particles)%color
	176	ELSE
	177	!
	178	!-- Particles have a tail
	179	WRITE (9,*) '--- before ALLOCATE simtime=',simulated_time,' #of_tails=', number_of_tails, &
	180	' max#of_tp=', maximum_number_of_tailpoints
[13]	181	#if defined( __ibm )
	182	CALL FLUSH_( 9 )
	183	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	184	CALL FLUSH( 9 )
	185	#endif
[1]	186	ALLOCATE( psize(number_of_tails), p_t(number_of_tails), &
	187	p_c(number_of_tails*maximum_number_of_tailpoints), &
	188	p_x(number_of_tails*maximum_number_of_tailpoints), &
	189	p_y(number_of_tails*maximum_number_of_tailpoints), &
	190	p_z(number_of_tails*maximum_number_of_tailpoints) )
	191	WRITE (9,*) '--- after ALLOCATE'
[13]	192	#if defined( __ibm )
	193	CALL FLUSH_( 9 )
	194	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	195	CALL FLUSH( 9 )
	196	#endif
[1]	197	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
	198	p_z = 0.0;
	199	i = 0
	200	k = 0
	201	DO n = 1, number_of_particles
	202	nn = particles(n)%tail_id
	203	IF ( nn /= 0 ) THEN
	204	k = k + 1
	205	IF ( simulated_time > 1338.0 ) THEN
	206	WRITE (9,*) '--- particle ',n,' tail_id=',nn,' #of_tp=',particles(n)%tailpoints
[13]	207	#if defined( __ibm )
	208	CALL FLUSH_( 9 )
	209	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	210	CALL FLUSH( 9 )
	211	#endif
[1]	212	ENDIF
	213	DO j = 1, particles(n)%tailpoints
	214	i = i + 1
	215	p_x(i) = particle_tail_coordinates(j,1,nn) * &
	216	superelevation_x
	217	p_y(i) = particle_tail_coordinates(j,2,nn) * &
	218	superelevation_y
	219	p_z(i) = particle_tail_coordinates(j,3,nn) * &
	220	superelevation
	221	p_c(i) = particle_tail_coordinates(j,4,nn)
	222	IF ( simulated_time > 1338.0 ) THEN
	223	WRITE (9,*) '--- tp= ',i,' x=',p_x(i),' y=',p_y(i), &
	224	' z=',p_z(i),' c=',p_c(i)
[13]	225	#if defined( __ibm )
	226	CALL FLUSH_( 9 )
	227	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	228	CALL FLUSH( 9 )
	229	#endif
[1]	230	ENDIF
	231	ENDDO
	232	psize(k) = particles(n)%dvrp_psize
	233	p_t(k) = particles(n)%tailpoints - 1
	234	IF ( simulated_time > 1338.0 ) THEN
	235	WRITE (9,*) '--- t= ',k,' psize=',psize(k),' p_t=',p_t(k)
[13]	236	#if defined( __ibm )
	237	CALL FLUSH_( 9 )
	238	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	239	CALL FLUSH( 9 )
	240	#endif
[1]	241	ENDIF
	242	ENDIF
	243	ENDDO
	244	WRITE (9,*) '--- after locally storing the particle attributes'
[13]	245	#if defined( __ibm )
	246	CALL FLUSH_( 9 )
	247	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	248	CALL FLUSH( 9 )
	249	#endif
[1]	250	ENDIF
	251
	252	!
	253	!-- Compute and plot particles in dvr-format
	254	IF ( uniform_particles .AND. .NOT. use_particle_tails ) THEN
	255	!
	256	!-- All particles have the same color. Use simple routine to set
	257	!-- the particle attributes (produces less output data)
	258	CALL DVRP_PARTICLES( m-1, p_x, p_y, p_z, psize )
	259	ELSE
	260	!
	261	!-- Set color definitions
	262	CALL user_dvrp_coltab( 'particles', 'none' )
	263
	264	CALL DVRP_COLORTABLE_HLS( m-1, 0, interval_values_dvrp, &
	265	interval_h_dvrp, interval_l_dvrp, &
	266	interval_s_dvrp, interval_a_dvrp )
	267
	268	IF ( .NOT. use_particle_tails ) THEN
	269	CALL DVRP_PARTICLES( m-1, number_of_particles, p_x, p_y, p_z, &
	270	3, psize, p_c, p_t )
	271	ELSE
	272	WRITE (9,*) '--- before DVRP_PARTICLES'
[13]	273	#if defined( __ibm )
	274	CALL FLUSH_( 9 )
	275	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	276	CALL FLUSH( 9 )
	277	#endif
[1]	278	CALL DVRP_PARTICLES( m-1, number_of_tails, p_x, p_y, p_z, 15, &
	279	psize, p_c, p_t )
	280	WRITE (9,*) '--- after DVRP_PARTICLES'
[13]	281	#if defined( __ibm )
	282	CALL FLUSH_( 9 )
	283	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	284	CALL FLUSH( 9 )
	285	#endif
[1]	286	ENDIF
	287	ENDIF
	288
	289	CALL DVRP_VISUALIZE( m-1, 3, dvrp_filecount )
	290	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende particles'
[13]	291	#if defined( __ibm )
[1]	292	CALL FLUSH_( 9 )
[13]	293	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	294	CALL FLUSH( 9 )
	295	#endif
[1]	296
	297	DEALLOCATE( psize, p_c, p_t, p_x, p_y, p_z )
	298
	299	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'stop' )
	300	#endif
	301
	302
	303	ELSEIF ( ( mode_dvrp(m)(1:10) == 'isosurface' .OR. &
	304	mode_dvrp(m)(1:6) == 'slicer' ) &
	305	.AND. output_variable /= ' ' ) THEN
	306
	307	!
	308	!-- Create an intermediate array, properly dimensioned for plot-output
	309	ALLOCATE( local_pf(nxl:nxr+1,nys:nyn+1,nzb:nz_do3d) )
	310
	311	!
	312	!-- Move original array to intermediate array
	313	SELECT CASE ( output_variable )
	314
	315	CASE ( 'u', 'u_xy', 'u_xz', 'u_yz' )
	316	DO i = nxl, nxr+1
	317	DO j = nys, nyn+1
	318	DO k = nzb, nz_do3d
	319	local_pf(i,j,k) = u(k,j,i)
	320	ENDDO
	321	ENDDO
	322	ENDDO
	323	!
	324	!-- Replace mirrored values at lower surface by real surface values
	325	IF ( output_variable == 'u_xz' .OR. &
	326	output_variable == 'u_yz' ) THEN
	327	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
	328	ENDIF
	329
	330
	331	CASE ( 'v', 'v_xy', 'v_xz', 'v_yz' )
	332	DO i = nxl, nxr+1
	333	DO j = nys, nyn+1
	334	DO k = nzb, nz_do3d
	335	local_pf(i,j,k) = v(k,j,i)
	336	ENDDO
	337	ENDDO
	338	ENDDO
	339	!
	340	!-- Replace mirrored values at lower surface by real surface values
	341	IF ( output_variable == 'v_xz' .OR. &
	342	output_variable == 'v_yz' ) THEN
	343	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
	344	ENDIF
	345
	346	CASE ( 'w', 'w_xy', 'w_xz', 'w_yz' )
	347	DO i = nxl, nxr+1
	348	DO j = nys, nyn+1
	349	DO k = nzb, nz_do3d
	350	local_pf(i,j,k) = w(k,j,i)
	351	ENDDO
	352	ENDDO
	353	ENDDO
	354
	355	CASE ( 'p', 'p_xy', 'p_xz', 'p_yz' )
	356	DO i = nxl, nxr+1
	357	DO j = nys, nyn+1
	358	DO k = nzb, nz_do3d
	359	local_pf(i,j,k) = p(k,j,i)
	360	ENDDO
	361	ENDDO
	362	ENDDO
	363
	364	CASE ( 'pt', 'pt_xy', 'pt_xz', 'pt_yz' )
	365	IF ( .NOT. cloud_physics ) THEN
	366	DO i = nxl, nxr+1
	367	DO j = nys, nyn+1
	368	DO k = nzb, nz_do3d
	369	local_pf(i,j,k) = pt(k,j,i)
	370	ENDDO
	371	ENDDO
	372	ENDDO
	373	ELSE
	374	DO i = nxl, nxr+1
	375	DO j = nys, nyn+1
	376	DO k = nzb, nz_do3d
	377	local_pf(i,j,k) = pt(k,j,i) + l_d_cp * pt_d_t(k) * &
	378	ql(k,j,i)
	379	ENDDO
	380	ENDDO
	381	ENDDO
	382	ENDIF
	383
	384	CASE ( 'q', 'q_xy', 'q_xz', 'q_yz' )
	385	IF ( moisture .OR. passive_scalar ) THEN
	386	DO i = nxl, nxr+1
	387	DO j = nys, nyn+1
	388	DO k = nzb, nz_do3d
	389	local_pf(i,j,k) = q(k,j,i)
	390	ENDDO
	391	ENDDO
	392	ENDDO
	393	ELSE
	394	IF ( myid == 0 ) THEN
	395	PRINT*, '+++ data_output_dvrp: if moisture/passive_scalar = ', &
	396	'FALSE output of ', output_variable, &
	397	'is not provided'
	398	ENDIF
	399	ENDIF
	400
	401	CASE ( 'ql', 'ql_xy', 'ql_xz', 'ql_yz' )
	402	IF ( cloud_physics .OR. cloud_droplets ) THEN
	403	DO i = nxl, nxr+1
	404	DO j = nys, nyn+1
	405	DO k = nzb, nz_do3d
	406	local_pf(i,j,k) = ql(k,j,i)
	407	ENDDO
	408	ENDDO
	409	ENDDO
	410	ELSE
	411	IF ( myid == 0 ) THEN
	412	PRINT*, '+++ data_output_dvrp: if cloud_physics = FALSE ', &
	413	'output of ', output_variable, 'is not provided'
	414	ENDIF
	415	ENDIF
	416
	417	CASE ( 'u*_xy' )
	418	DO i = nxl, nxr+1
	419	DO j = nys, nyn+1
	420	local_pf(i,j,nzb+1) = us(j,i)
	421	ENDDO
	422	ENDDO
	423	slicer_position = zu(nzb+1)
	424
	425	CASE ( 't*_xy' )
	426	DO i = nxl, nxr+1
	427	DO j = nys, nyn+1
	428	local_pf(i,j,nzb+1) = ts(j,i)
	429	ENDDO
	430	ENDDO
	431	slicer_position = zu(nzb+1)
	432
	433
	434	CASE DEFAULT
	435	IF ( myid == 0 ) THEN
	436	PRINT*,'+++ data_output_dvrp: no output possible for: ', &
	437	output_variable
	438	ENDIF
	439
	440	END SELECT
	441
	442
	443	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
	444
	445	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang isosurface'
[13]	446	#if defined( __ibm )
[1]	447	CALL FLUSH_( 9 )
[13]	448	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	449	CALL FLUSH( 9 )
	450	#endif
[1]	451	!
	452	!-- DVRP-Calls for plotting isosurfaces:
	453	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'start' )
	454
	455	!
	456	!-- Definition of characteristics of isosurface material
	457	!-- Preliminary settings for w!
	458	IF ( output_variable == 'w' ) THEN
	459	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.3, 0.8, 0.3, 0.0 )
	460	ELSE
	461	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.9, 0.9, 0.9, 0.0 )
	462	ENDIF
	463
	464	!
	465	!-- Compute and plot isosurface in dvr-format
	466	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
	467	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
	468	CALL DVRP_THRESHOLD( m-1, threshold(tv) )
	469	CALL DVRP_VISUALIZE( m-1, 1, dvrp_filecount )
	470	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende isosurface'
[13]	471	#if defined( __ibm )
[1]	472	CALL FLUSH_( 9 )
[13]	473	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	474	CALL FLUSH( 9 )
	475	#endif
[1]	476
	477	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'stop' )
	478
	479	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
	480
	481	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang slicer'
[13]	482	#if defined( __ibm )
[1]	483	CALL FLUSH_( 9 )
[13]	484	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	485	CALL FLUSH( 9 )
	486	#endif
[1]	487	!
	488	!-- DVRP-Calls for plotting slicers:
	489	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'start' )
	490
	491	!
	492	!-- Material and color definitions
	493	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.0, 0.0, 0.0, 0.0 )
	494
	495	islice_dvrp = islice_dvrp + 1
	496	! CALL DVRP_COLORFUNCTION( m-1, DVRP_CM_HLS, 25, &
	497	! slicer_range_limits_dvrp(:,islice_dvrp), &
	498	! color_dvrp )
	499
	500	CALL user_dvrp_coltab( 'slicer', output_variable )
	501
	502	CALL DVRP_COLORTABLE_HLS( m-1, 1, interval_values_dvrp, &
	503	interval_h_dvrp, interval_l_dvrp, &
	504	interval_s_dvrp, interval_a_dvrp )
	505
	506	!
	507	!-- Compute and plot slicer in dvr-format
	508	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
	509	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
	510	CALL DVRP_SLICER( m-1, section_mode, slicer_position )
	511	CALL DVRP_VISUALIZE( m-1, 2, dvrp_filecount )
	512
	513	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'stop' )
	514
	515	WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende slicer'
[13]	516	#if defined( __ibm )
[1]	517	CALL FLUSH_( 9 )
[13]	518	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	519	CALL FLUSH( 9 )
	520	#endif
[1]	521	ENDIF
	522
	523	DEALLOCATE( local_pf )
	524
	525	ENDIF
	526
	527	m = m + 1
	528
	529	ENDDO
	530
	531	dvrp_filecount = dvrp_filecount + 1
	532
	533	CALL cpu_log( log_point(27), 'data_output_dvrp', 'stop' )
	534	WRITE ( 9, * ) '*** myid=', myid, ' Ende data_output_dvrp'
[13]	535	#if defined( __ibm )
[1]	536	CALL FLUSH_( 9 )
[13]	537	#elif defined( __lcmuk ) \|\| defined( __lctit ) \|\| defined( __nec )
	538	CALL FLUSH( 9 )
	539	#endif
[1]	540
	541	#endif
	542	END SUBROUTINE data_output_dvrp

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |