Home

Context Navigation

data_output_dvrp.f90 @ 130

Last change on this file since 130 was 130, checked in by letzel, 17 years ago

DVRP output modifications:

The user can now visualize user-defined quantities using dvrp.

data_output_dvrp calls the new user_interface subroutine
user_data_output_dvrp in case of unknown variables (CASE DEFAULT).

Two instead of one digit are allowed to specify isosurface and slicer

variables with the parameter mode_dvrp.

Property svn:keywords set to Id

File size: 18.8 KB

Rev	Line
[1]	1	MODULE dvrp_color
	2
	3	USE dvrp_variables
	4
	5	IMPLICIT NONE
	6
	7	CONTAINS
	8
	9	SUBROUTINE color_dvrp( value, color )
	10
	11	REAL, INTENT(IN) :: value
	12	REAL, INTENT(OUT) :: color(4)
	13
	14	REAL :: scale
	15
	16	scale = ( value - slicer_range_limits_dvrp(1,islice_dvrp) ) / &
	17	( slicer_range_limits_dvrp(2,islice_dvrp) - &
	18	slicer_range_limits_dvrp(1,islice_dvrp) )
	19
	20	scale = MODULO( 180.0 + 180.0 * scale, 360.0 )
	21
	22	color = (/ scale, 0.5, 1.0, 0.0 /)
	23
	24	END SUBROUTINE color_dvrp
	25
	26	END MODULE dvrp_color
	27
	28
	29	RECURSIVE SUBROUTINE data_output_dvrp
	30
	31	!------------------------------------------------------------------------------!
	32	! Actual revisions:
	33	! -----------------
[130]	34	! allow two instead of one digit to specify isosurface and slicer variables
	35	! for unknown variables (CASE DEFAULT) call new subroutine
	36	! user_data_output_dvrp
[86]	37	! TEST: different colours for isosurfaces
[1]	38	! TEST: write statements
	39	!
	40	! Former revisions:
	41	! -----------------
[3]	42	! $Id: data_output_dvrp.f90 130 2007-11-13 14:08:40Z letzel $
[77]	43	!
[83]	44	! 82 2007-04-16 15:40:52Z raasch
	45	! Preprocessor strings for different linux clusters changed to "lc",
	46	! routine local_flush is used for buffer flushing
	47	!
[77]	48	! 75 2007-03-22 09:54:05Z raasch
	49	! Particles-package is now part of the default code,
	50	! moisture renamed humidity
	51	!
[3]	52	! RCS Log replace by Id keyword, revision history cleaned up
	53	!
[1]	54	! Revision 1.13 2006/02/23 10:25:12 raasch
	55	! Former routine plot_dvrp renamed data_output_dvrp,
	56	! Only a fraction of the particles may have a tail,
	57	! pl.. replaced by do.., %size renamed %dvrp_psize
	58	!
	59	! Revision 1.1 2000/04/27 06:27:17 raasch
	60	! Initial revision
	61	!
	62	!
	63	! Description:
	64	! ------------
	65	! Plot of isosurface, particles and slicers with dvrp-software
	66	!------------------------------------------------------------------------------!
	67	#if defined( __dvrp_graphics )
	68
	69	USE arrays_3d
	70	USE cloud_parameters
	71	USE cpulog
	72	USE DVRP
	73	USE dvrp_color
	74	USE dvrp_variables
	75	USE grid_variables
	76	USE indices
	77	USE interfaces
	78	USE particle_attributes
	79	USE pegrid
	80	USE control_parameters
	81
	82	IMPLICIT NONE
	83
	84	CHARACTER (LEN=2) :: section_chr
	85	CHARACTER (LEN=6) :: output_variable
	86	INTEGER :: i, j, k, l, m, n, nn, section_mode, tv, vn
	87	INTEGER, DIMENSION(:), ALLOCATABLE :: p_c, p_t
	88	REAL :: center(3), distance, slicer_position, surface_value
	89	REAL, DIMENSION(:), ALLOCATABLE :: psize, p_x, p_y, p_z
	90	REAL, DIMENSION(:,:,:), ALLOCATABLE :: local_pf
	91
	92
	93	WRITE ( 9, * ) '*** myid=', myid, ' Anfang data_output_dvrp'
[82]	94	CALL local_flush( 9 )
[1]	95	CALL cpu_log( log_point(27), 'data_output_dvrp', 'start' )
	96
	97	!
	98	!-- Loop over all output modes choosed
	99	m = 1
	100	tv = 0 ! threshold counter
	101	islice_dvrp = 0 ! slice plane counter
	102	DO WHILE ( mode_dvrp(m) /= ' ' )
	103	!
	104	!-- Update of the steering variables
	105	IF ( .NOT. lock_steering_update ) THEN
	106	!
	107	!-- Set lock to avoid recursive calls of DVRP_STEERING_UPDATE
	108	lock_steering_update = .TRUE.
[86]	109	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: vor steering_update'
	110	! CALL local_flush( 9 )
[1]	111	CALL DVRP_STEERING_UPDATE( m-1, data_output_dvrp )
[86]	112	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: nach steering_update'
	113	! CALL local_flush( 9 )
[1]	114	lock_steering_update = .FALSE.
	115	ENDIF
	116
	117	!
	118	!-- Determine the variable which shall be plotted (in case of slicers or
	119	!-- isosurfaces)
	120	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
[130]	121	READ ( mode_dvrp(m), '(10X,I2)' ) vn
[1]	122	output_variable = do3d(0,vn)
	123	tv = tv + 1
	124	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
[130]	125	READ ( mode_dvrp(m), '(6X,I2)' ) vn
[1]	126	output_variable = do2d(0,vn)
	127	l = MAX( 2, LEN_TRIM( do2d(0,vn) ) )
	128	section_chr = do2d(0,vn)(l-1:l)
	129	SELECT CASE ( section_chr )
	130	CASE ( 'xy' )
	131	section_mode = 2
	132	slicer_position = zu(MIN( slicer_position_dvrp(m), nz_do3d ))
	133	CASE ( 'xz' )
	134	section_mode = 1
	135	slicer_position = slicer_position_dvrp(m) * dy
	136	CASE ( 'yz' )
	137	section_mode = 0
	138	slicer_position = slicer_position_dvrp(m) * dx
	139	END SELECT
	140	ENDIF
	141
	142	!
	143	!-- Select the plot mode (in case of isosurface or slicer only if user has
	144	!-- defined a variable which shall be plotted; otherwise do nothing)
[86]	145	IF ( mode_dvrp(m)(1:9) == 'particles' .AND. particle_advection .AND. &
	146	simulated_time >= particle_advection_start ) THEN
[1]	147
[86]	148	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang particles'
	149	! CALL local_flush( 9 )
[1]	150	!
	151	!-- DVRP-Calls for plotting particles:
	152	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'start' )
	153
	154	!
	155	!-- Definition of characteristics of particle material
[106]	156	! CALL DVRP_MATERIAL_RGB( m-1, 1, 0.1, 0.7, 0.1, 0.0 )
	157	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.0, 0.0, 0.0, 0.0 )
[1]	158
	159	!
	160	!-- Move particle coordinates to one-dimensional arrays
	161	IF ( .NOT. use_particle_tails ) THEN
	162	!
	163	!-- All particles are output
	164	ALLOCATE( psize(number_of_particles), p_t(number_of_particles), &
	165	p_c(number_of_particles), p_x(number_of_particles), &
	166	p_y(number_of_particles), p_z(number_of_particles) )
	167	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
	168	p_z = 0.0;
	169	psize = particles(1:number_of_particles)%dvrp_psize
	170	p_x = particles(1:number_of_particles)%x * superelevation_x
	171	p_y = particles(1:number_of_particles)%y * superelevation_y
	172	p_z = particles(1:number_of_particles)%z * superelevation
	173	p_c = particles(1:number_of_particles)%color
	174	ELSE
	175	!
	176	!-- Particles have a tail
[86]	177	! WRITE (9,*) '--- before ALLOCATE simtime=',simulated_time,' #of_tails=', number_of_tails, &
	178	! ' max#of_tp=', maximum_number_of_tailpoints
	179	! CALL local_flush( 9 )
[1]	180	ALLOCATE( psize(number_of_tails), p_t(number_of_tails), &
	181	p_c(number_of_tails*maximum_number_of_tailpoints), &
	182	p_x(number_of_tails*maximum_number_of_tailpoints), &
	183	p_y(number_of_tails*maximum_number_of_tailpoints), &
	184	p_z(number_of_tails*maximum_number_of_tailpoints) )
[86]	185	! WRITE (9,*) '--- after ALLOCATE'
	186	! CALL local_flush( 9 )
[1]	187	psize = 0.0; p_t = 0; p_c = 0.0; p_x = 0.0; p_y = 0.0
	188	p_z = 0.0;
	189	i = 0
	190	k = 0
	191	DO n = 1, number_of_particles
	192	nn = particles(n)%tail_id
	193	IF ( nn /= 0 ) THEN
	194	k = k + 1
[86]	195	! IF ( simulated_time > 1338.0 ) THEN
	196	! WRITE (9,*) '--- particle ',n,' tail_id=',nn,' #of_tp=',particles(n)%tailpoints
	197	! CALL local_flush( 9 )
	198	! ENDIF
[1]	199	DO j = 1, particles(n)%tailpoints
	200	i = i + 1
	201	p_x(i) = particle_tail_coordinates(j,1,nn) * &
	202	superelevation_x
	203	p_y(i) = particle_tail_coordinates(j,2,nn) * &
	204	superelevation_y
	205	p_z(i) = particle_tail_coordinates(j,3,nn) * &
	206	superelevation
	207	p_c(i) = particle_tail_coordinates(j,4,nn)
[86]	208	! IF ( simulated_time > 1338.0 ) THEN
	209	! WRITE (9,*) '--- tp= ',i,' x=',p_x(i),' y=',p_y(i), &
	210	! ' z=',p_z(i),' c=',p_c(i)
	211	! CALL local_flush( 9 )
	212	! ENDIF
[1]	213	ENDDO
	214	psize(k) = particles(n)%dvrp_psize
	215	p_t(k) = particles(n)%tailpoints - 1
[86]	216	! IF ( simulated_time > 1338.0 ) THEN
	217	! WRITE (9,*) '--- t= ',k,' psize=',psize(k),' p_t=',p_t(k)
	218	! CALL local_flush( 9 )
	219	! ENDIF
[1]	220	ENDIF
	221	ENDDO
[86]	222	! WRITE (9,*) '--- after locally storing the particle attributes'
	223	! CALL local_flush( 9 )
[1]	224	ENDIF
	225
	226	!
	227	!-- Compute and plot particles in dvr-format
	228	IF ( uniform_particles .AND. .NOT. use_particle_tails ) THEN
	229	!
	230	!-- All particles have the same color. Use simple routine to set
	231	!-- the particle attributes (produces less output data)
	232	CALL DVRP_PARTICLES( m-1, p_x, p_y, p_z, psize )
	233	ELSE
	234	!
	235	!-- Set color definitions
	236	CALL user_dvrp_coltab( 'particles', 'none' )
	237
	238	CALL DVRP_COLORTABLE_HLS( m-1, 0, interval_values_dvrp, &
	239	interval_h_dvrp, interval_l_dvrp, &
	240	interval_s_dvrp, interval_a_dvrp )
	241
	242	IF ( .NOT. use_particle_tails ) THEN
	243	CALL DVRP_PARTICLES( m-1, number_of_particles, p_x, p_y, p_z, &
	244	3, psize, p_c, p_t )
	245	ELSE
[86]	246	! WRITE (9,*) '--- before DVRP_PARTICLES'
	247	! CALL local_flush( 9 )
[1]	248	CALL DVRP_PARTICLES( m-1, number_of_tails, p_x, p_y, p_z, 15, &
	249	psize, p_c, p_t )
[86]	250	! WRITE (9,*) '--- after DVRP_PARTICLES'
	251	! WRITE (9,*) 'm-1 = ',m-1
	252	! WRITE (9,*) 'number_of_tails=', number_of_tails
	253	! WRITE (9,*) 'p_x =', p_x
	254	! WRITE (9,*) 'p_y =', p_y
	255	! WRITE (9,*) 'p_z =', p_z
	256	! WRITE (9,*) 'psize =', psize
	257	! WRITE (9,*) 'p_c =', p_c
	258	! WRITE (9,*) 'p_t =', p_t
[60]	259
[86]	260	! CALL local_flush( 9 )
[1]	261	ENDIF
	262	ENDIF
	263
	264	CALL DVRP_VISUALIZE( m-1, 3, dvrp_filecount )
[86]	265	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende particles'
	266	! CALL local_flush( 9 )
[1]	267
	268	DEALLOCATE( psize, p_c, p_t, p_x, p_y, p_z )
	269
	270	CALL cpu_log( log_point_s(28), 'dvrp_particles', 'stop' )
	271
	272
	273	ELSEIF ( ( mode_dvrp(m)(1:10) == 'isosurface' .OR. &
	274	mode_dvrp(m)(1:6) == 'slicer' ) &
	275	.AND. output_variable /= ' ' ) THEN
	276
	277	!
	278	!-- Create an intermediate array, properly dimensioned for plot-output
	279	ALLOCATE( local_pf(nxl:nxr+1,nys:nyn+1,nzb:nz_do3d) )
	280
	281	!
	282	!-- Move original array to intermediate array
	283	SELECT CASE ( output_variable )
	284
	285	CASE ( 'u', 'u_xy', 'u_xz', 'u_yz' )
	286	DO i = nxl, nxr+1
	287	DO j = nys, nyn+1
	288	DO k = nzb, nz_do3d
	289	local_pf(i,j,k) = u(k,j,i)
	290	ENDDO
	291	ENDDO
	292	ENDDO
	293	!
	294	!-- Replace mirrored values at lower surface by real surface values
	295	IF ( output_variable == 'u_xz' .OR. &
	296	output_variable == 'u_yz' ) THEN
	297	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
	298	ENDIF
	299
	300
	301	CASE ( 'v', 'v_xy', 'v_xz', 'v_yz' )
	302	DO i = nxl, nxr+1
	303	DO j = nys, nyn+1
	304	DO k = nzb, nz_do3d
	305	local_pf(i,j,k) = v(k,j,i)
	306	ENDDO
	307	ENDDO
	308	ENDDO
	309	!
	310	!-- Replace mirrored values at lower surface by real surface values
	311	IF ( output_variable == 'v_xz' .OR. &
	312	output_variable == 'v_yz' ) THEN
	313	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
	314	ENDIF
	315
	316	CASE ( 'w', 'w_xy', 'w_xz', 'w_yz' )
	317	DO i = nxl, nxr+1
	318	DO j = nys, nyn+1
	319	DO k = nzb, nz_do3d
	320	local_pf(i,j,k) = w(k,j,i)
	321	ENDDO
	322	ENDDO
	323	ENDDO
[106]	324	! Averaging for Langmuir circulation
	325	! DO k = nzb, nz_do3d
	326	! DO j = nys+1, nyn
	327	! DO i = nxl, nxr+1
	328	! local_pf(i,j,k) = 0.25 * local_pf(i,j-1,k) + &
	329	! 0.50 * local_pf(i,j,k) + &
	330	! 0.25 * local_pf(i,j+1,k)
	331	! ENDDO
	332	! ENDDO
	333	! ENDDO
[1]	334
	335	CASE ( 'p', 'p_xy', 'p_xz', 'p_yz' )
	336	DO i = nxl, nxr+1
	337	DO j = nys, nyn+1
	338	DO k = nzb, nz_do3d
	339	local_pf(i,j,k) = p(k,j,i)
	340	ENDDO
	341	ENDDO
	342	ENDDO
	343
	344	CASE ( 'pt', 'pt_xy', 'pt_xz', 'pt_yz' )
	345	IF ( .NOT. cloud_physics ) THEN
	346	DO i = nxl, nxr+1
	347	DO j = nys, nyn+1
	348	DO k = nzb, nz_do3d
	349	local_pf(i,j,k) = pt(k,j,i)
	350	ENDDO
	351	ENDDO
	352	ENDDO
	353	ELSE
	354	DO i = nxl, nxr+1
	355	DO j = nys, nyn+1
	356	DO k = nzb, nz_do3d
	357	local_pf(i,j,k) = pt(k,j,i) + l_d_cp * pt_d_t(k) * &
	358	ql(k,j,i)
	359	ENDDO
	360	ENDDO
	361	ENDDO
	362	ENDIF
	363
	364	CASE ( 'q', 'q_xy', 'q_xz', 'q_yz' )
[75]	365	IF ( humidity .OR. passive_scalar ) THEN
[1]	366	DO i = nxl, nxr+1
	367	DO j = nys, nyn+1
	368	DO k = nzb, nz_do3d
	369	local_pf(i,j,k) = q(k,j,i)
	370	ENDDO
	371	ENDDO
	372	ENDDO
	373	ELSE
	374	IF ( myid == 0 ) THEN
[75]	375	PRINT*, '+++ data_output_dvrp: if humidity/passive_scalar = ', &
[1]	376	'FALSE output of ', output_variable, &
	377	'is not provided'
	378	ENDIF
	379	ENDIF
	380
	381	CASE ( 'ql', 'ql_xy', 'ql_xz', 'ql_yz' )
	382	IF ( cloud_physics .OR. cloud_droplets ) THEN
	383	DO i = nxl, nxr+1
	384	DO j = nys, nyn+1
	385	DO k = nzb, nz_do3d
	386	local_pf(i,j,k) = ql(k,j,i)
	387	ENDDO
	388	ENDDO
	389	ENDDO
	390	ELSE
	391	IF ( myid == 0 ) THEN
	392	PRINT*, '+++ data_output_dvrp: if cloud_physics = FALSE ', &
	393	'output of ', output_variable, 'is not provided'
	394	ENDIF
	395	ENDIF
	396
	397	CASE ( 'u*_xy' )
	398	DO i = nxl, nxr+1
	399	DO j = nys, nyn+1
	400	local_pf(i,j,nzb+1) = us(j,i)
	401	ENDDO
	402	ENDDO
	403	slicer_position = zu(nzb+1)
	404
	405	CASE ( 't*_xy' )
	406	DO i = nxl, nxr+1
	407	DO j = nys, nyn+1
	408	local_pf(i,j,nzb+1) = ts(j,i)
	409	ENDDO
	410	ENDDO
	411	slicer_position = zu(nzb+1)
	412
	413
	414	CASE DEFAULT
[130]	415	!
	416	!-- The DEFAULT case is reached either if output_variable contains
	417	!-- unsupported variable or if the user has coded a special case in
	418	!-- the user interface. There, the subroutine user_data_output_dvrp
	419	!-- checks which of these two conditions applies.
	420	CALL user_data_output_dvrp( output_variable, local_pf )
[1]	421
[130]	422
[1]	423	END SELECT
	424
	425
	426	IF ( mode_dvrp(m)(1:10) == 'isosurface' ) THEN
	427
[86]	428	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang isosurface'
	429	! CALL local_flush( 9 )
[1]	430	!
	431	!-- DVRP-Calls for plotting isosurfaces:
	432	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'start' )
	433
	434	!
	435	!-- Definition of characteristics of isosurface material
	436	!-- Preliminary settings for w!
	437	IF ( output_variable == 'w' ) THEN
[86]	438	IF ( tv == 1 ) THEN
	439	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.8, 0.1, 0.1, 0.0 )
	440	ELSE
	441	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.1, 0.1, 0.8, 0.0 )
	442	ENDIF
[1]	443	ELSE
	444	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.9, 0.9, 0.9, 0.0 )
	445	ENDIF
	446
	447	!
	448	!-- Compute and plot isosurface in dvr-format
	449	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
	450	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
	451	CALL DVRP_THRESHOLD( m-1, threshold(tv) )
	452	CALL DVRP_VISUALIZE( m-1, 1, dvrp_filecount )
[86]	453	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende isosurface'
	454	! CALL local_flush( 9 )
[1]	455
	456	CALL cpu_log( log_point_s(26), 'dvrp_isosurface', 'stop' )
	457
	458	ELSEIF ( mode_dvrp(m)(1:6) == 'slicer' ) THEN
	459
[86]	460	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: anfang slicer'
	461	! CALL local_flush( 9 )
[1]	462	!
	463	!-- DVRP-Calls for plotting slicers:
	464	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'start' )
	465
	466	!
	467	!-- Material and color definitions
	468	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.0, 0.0, 0.0, 0.0 )
	469
	470	islice_dvrp = islice_dvrp + 1
	471	! CALL DVRP_COLORFUNCTION( m-1, DVRP_CM_HLS, 25, &
	472	! slicer_range_limits_dvrp(:,islice_dvrp), &
	473	! color_dvrp )
	474
	475	CALL user_dvrp_coltab( 'slicer', output_variable )
	476
	477	CALL DVRP_COLORTABLE_HLS( m-1, 1, interval_values_dvrp, &
	478	interval_h_dvrp, interval_l_dvrp, &
	479	interval_s_dvrp, interval_a_dvrp )
	480
	481	!
	482	!-- Compute and plot slicer in dvr-format
	483	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
	484	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
[106]	485	! CALL DVRP_SLICER( m-1, section_mode, slicer_position )
	486	CALL DVRP_SLICER( m-1, 2, 1.0 )
	487	WRITE (9,*) 'nx_dvrp=', nx_dvrp
	488	WRITE (9,*) 'ny_dvrp=', ny_dvrp
	489	WRITE (9,*) 'nz_dvrp=', nz_dvrp
	490	WRITE (9,*) 'section_mode=', section_mode
	491	WRITE (9,*) 'slicer_position=', slicer_position
	492	CALL local_flush( 9 )
	493
[1]	494	CALL DVRP_VISUALIZE( m-1, 2, dvrp_filecount )
	495
	496	CALL cpu_log( log_point_s(27), 'dvrp_slicer', 'stop' )
	497
[86]	498	! WRITE ( 9, * ) '*** myid=', myid, ' data_output_dvrp: ende slicer'
	499	! CALL local_flush( 9 )
[1]	500	ENDIF
	501
	502	DEALLOCATE( local_pf )
	503
	504	ENDIF
	505
	506	m = m + 1
	507
	508	ENDDO
	509
	510	dvrp_filecount = dvrp_filecount + 1
	511
	512	CALL cpu_log( log_point(27), 'data_output_dvrp', 'stop' )
[86]	513	! WRITE ( 9, * ) '*** myid=', myid, ' Ende data_output_dvrp'
	514	! CALL local_flush( 9 )
[1]	515
	516	#endif
	517	END SUBROUTINE data_output_dvrp

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/data_output_dvrp.f90 @ 130

Download in other formats: