Home

Context Navigation

data_output_2d.f90 @ 80

Last change on this file since 80 was 77, checked in by raasch, 18 years ago

New:
---

particle reflection from vertical walls implemented, particle SGS model adjusted to walls

Wall functions for vertical walls now include diabatic conditions. New subroutines wall_fluxes, wall_fluxes_e. New 4D-array rif_wall.

new d3par-parameter netcdf_64bit_3d to switch on 64bit offset only for 3D files

new d3par-parameter dt_max to define the maximum value for the allowed timestep

new inipar-parameter loop_optimization to control the loop optimization method

new inipar-parameter pt_refrence. If given, this value is used as the reference that in buoyancy terms (otherwise, the instantaneous horizontally averaged temperature is used).

new user interface user_advec_particles

new initializing action "by_user" calls user_init_3d_model and allows the initial setting of all 3d arrays

topography height informations are stored on arrays zu_s_inner and zw_w_inner and output to the 2d/3d NetCDF files

samples added to the user interface which show how to add user-define time series quantities.

calculation/output of precipitation amount, precipitation rate and z0 (by setting "pra*", "prr*", "z0*" with data_output). The time interval on which the precipitation amount is defined is set by new d3par-parameter precipitation_amount_interval

unit 9 opened for debug output (file DEBUG_<pe#>)

Makefile, advec_particles, average_3d_data, buoyancy, calc_precipitation, check_open, check_parameters, data_output_2d, diffusion_e, diffusion_u, diffusion_v, diffusion_w, diffusivities, header, impact_of_latent_heat, init_particles, init_3d_model, modules, netcdf, parin, production_e, read_var_list, read_3d_binary, sum_up_3d_data, user_interface, write_var_list, write_3d_binary

New: wall_fluxes

Changed:

General revision of non-cyclic horizontal boundary conditions: radiation boundary conditions are now used instead of Neumann conditions at the outflow (calculation needs velocity values for t-dt, which are stored on new arrays u_m_l, u_m_r, etc.), calculation of mean outflow is not needed any more, volume flow control is added for the outflow boundary (currently only for the north boundary!!), additional gridpoints along x and y (uxrp, vynp) are not needed any more, routine "boundary_conds" now operates on timelevel t+dt and is not split in two parts (main, uvw_outflow) any more, Neumann boundary conditions at inflow/outflow in case of non-cyclic boundary conditions for all 2d-arrays that are handled by exchange_horiz_2d

The FFT-method for solving the Poisson-equation is now working with Neumann boundary conditions both at the bottom and the top. This requires adjustments of the tridiagonal coefficients and subtracting the horizontally averaged mean from the vertical velocity field.

+age_m in particle_type

Particles-package is now part of the default code ("-p particles" is not needed any more).

Move call of user_actions( 'after_integration' ) below increment of times
and counters. user_actions is now called for each statistic region and has as an argument the number of the respective region (sr)

d3par-parameter data_output_ts removed. Timeseries output for "profil" removed. Timeseries are now switched on by dt_dots. Timeseries data is collected in flow_statistics.

Initial velocities at nzb+1 are regarded for volume flow control in case they have been set zero before (to avoid small timesteps); see new internal parameters u/v_nzb_p1_for_vfc.

q is not allowed to become negative (prognostic_equations).

poisfft_init is only called if fft-solver is switched on (init_pegrid).

d3par-parameter moisture renamed to humidity.

Subversion global revision number is read from mrun and added to the run description header and to the run control (_rc) file.

vtk directives removed from main program.

The uitility routine interpret_config reads PALM environment variables from NAMELIST instead using the system call GETENV.

advec_u_pw, advec_u_up, advec_v_pw, advec_v_up, asselin_filter, check_parameters, coriolis, data_output_dvrp, data_output_ptseries, data_output_ts, data_output_2d, data_output_3d, diffusion_u, diffusion_v, exchange_horiz, exchange_horiz_2d, flow_statistics, header, init_grid, init_particles, init_pegrid, init_rankine, init_pt_anomaly, init_1d_model, init_3d_model, modules, palm, package_parin, parin, poisfft, poismg, prandtl_fluxes, pres, production_e, prognostic_equations, read_var_list, read_3d_binary, sor, swap_timelevel, time_integration, write_var_list, write_3d_binary

Errors:

Bugfix: preset of tendencies te_em, te_um, te_vm in init_1d_model

Bugfix in sample for reading user defined data from restart file (user_init)

Bugfix in setting diffusivities for cases with the outflow damping layer extending over more than one subdomain (init_3d_model)

Check for possible negative humidities in the initial humidity profile.

in Makefile, default suffixes removed from the suffix list to avoid calling of m2c in
# case of .mod files

Makefile
check_parameters, init_1d_model, init_3d_model, user_interface

Property svn:keywords set to Id

File size: 46.4 KB

Line
1	SUBROUTINE data_output_2d( mode, av )
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: data_output_2d.f90 77 2007-03-29 04:26:56Z raasch $
11	!
12	! 75 2007-03-22 09:54:05Z raasch
13	! Output of precipitation amount/rate and roughness length,
14	! 2nd+3rd argument removed from exchange horiz
15	!
16	! RCS Log replace by Id keyword, revision history cleaned up
17	!
18	! Revision 1.5 2006/08/22 13:50:29 raasch
19	! xz and yz cross sections now up to nzt+1
20	!
21	! Revision 1.2 2006/02/23 10:19:22 raasch
22	! Output of time-averaged data, output of averages along x, y, or z,
23	! output of user-defined quantities,
24	! section data are copied from local_pf to local_2d before they are output,
25	! output of particle concentration and mean radius,
26	! Former subroutine plot_2d renamed data_output_2d, pl2d.. renamed do2d..,
27	! anz renamed ngp, ebene renamed section, pl2d_.._anz renamed do2d_.._n
28	!
29	! Revision 1.1 1997/08/11 06:24:09 raasch
30	! Initial revision
31	!
32	!
33	! Description:
34	! ------------
35	! Data output of horizontal cross-sections in NetCDF format or binary format
36	! compatible to old graphic software iso2d.
37	! Attention: The position of the sectional planes is still not always computed
38	! --------- correctly. (zu is used always)!
39	!------------------------------------------------------------------------------!
40
41	USE arrays_3d
42	USE averaging
43	USE cloud_parameters
44	USE control_parameters
45	USE cpulog
46	USE grid_variables
47	USE indices
48	USE interfaces
49	USE netcdf_control
50	USE particle_attributes
51	USE pegrid
52
53	IMPLICIT NONE
54
55	CHARACTER (LEN=2) :: do2d_mode, mode
56	CHARACTER (LEN=4) :: grid
57	CHARACTER (LEN=25) :: section_chr
58	CHARACTER (LEN=50) :: rtext
59	INTEGER :: av, ngp, file_id, i, if, is, j, k, l, layer_xy, n, psi, s, &
60	sender, &
61	ind(4)
62	LOGICAL :: found, resorted, two_d
63	REAL :: mean_r, s_r3, s_r4
64	REAL, DIMENSION(:), ALLOCATABLE :: level_z
65	REAL, DIMENSION(:,:), ALLOCATABLE :: local_2d, local_2d_l
66	REAL, DIMENSION(:,:,:), ALLOCATABLE :: local_pf
67	#if defined( __parallel )
68	REAL, DIMENSION(:,:), ALLOCATABLE :: total_2d
69	#endif
70	REAL, DIMENSION(:,:,:), POINTER :: to_be_resorted
71
72	NAMELIST /LOCAL/ rtext
73
74	CALL cpu_log (log_point(3),'data_output_2d','start')
75
76	!
77	!-- Immediate return, if no output is requested (no respective sections
78	!-- found in parameter data_output)
79	IF ( mode == 'xy' .AND. .NOT. data_output_xy(av) ) RETURN
80	IF ( mode == 'xz' .AND. .NOT. data_output_xz(av) ) RETURN
81	IF ( mode == 'yz' .AND. .NOT. data_output_yz(av) ) RETURN
82
83	two_d = .FALSE. ! local variable to distinguish between output of pure 2D
84	! arrays and cross-sections of 3D arrays.
85
86	!
87	!-- Depending on the orientation of the cross-section, the respective output
88	!-- files have to be opened.
89	SELECT CASE ( mode )
90
91	CASE ( 'xy' )
92
93	s = 1
94	ALLOCATE( level_z(0:nzt+1), local_2d(nxl-1:nxr+1,nys-1:nyn+1) )
95
96	#if defined( __netcdf )
97	IF ( myid == 0 .AND. netcdf_output ) CALL check_open( 101+av*10 )
98	#endif
99
100	IF ( data_output_2d_on_each_pe ) THEN
101	CALL check_open( 21 )
102	ELSE
103	IF ( myid == 0 ) THEN
104	IF ( iso2d_output ) CALL check_open( 21 )
105	#if defined( __parallel )
106	ALLOCATE( total_2d(-1:nx+1,-1:ny+1) )
107	#endif
108	ENDIF
109	ENDIF
110
111	CASE ( 'xz' )
112
113	s = 2
114	ALLOCATE( local_2d(nxl-1:nxr+1,nzb:nzt+1) )
115
116	#if defined( __netcdf )
117	IF ( myid == 0 .AND. netcdf_output ) CALL check_open( 102+av*10 )
118	#endif
119
120	IF ( data_output_2d_on_each_pe ) THEN
121	CALL check_open( 22 )
122	ELSE
123	IF ( myid == 0 ) THEN
124	IF ( iso2d_output ) CALL check_open( 22 )
125	#if defined( __parallel )
126	ALLOCATE( total_2d(-1:nx+1,nzb:nzt+1) )
127	#endif
128	ENDIF
129	ENDIF
130
131	CASE ( 'yz' )
132
133	s = 3
134	ALLOCATE( local_2d(nys-1:nyn+1,nzb:nzt+1) )
135
136	#if defined( __netcdf )
137	IF ( myid == 0 .AND. netcdf_output ) CALL check_open( 103+av*10 )
138	#endif
139
140	IF ( data_output_2d_on_each_pe ) THEN
141	CALL check_open( 23 )
142	ELSE
143	IF ( myid == 0 ) THEN
144	IF ( iso2d_output ) CALL check_open( 23 )
145	#if defined( __parallel )
146	ALLOCATE( total_2d(-1:ny+1,nzb:nzt+1) )
147	#endif
148	ENDIF
149	ENDIF
150
151	CASE DEFAULT
152
153	PRINT*,'+++ data_output_2d: unknown cross-section: ',mode
154	CALL local_stop
155
156	END SELECT
157
158	!
159	!-- Allocate a temporary array for resorting (kji -> ijk).
160	ALLOCATE( local_pf(nxl-1:nxr+1,nys-1:nyn+1,nzb:nzt+1) )
161
162	!
163	!-- Loop of all variables to be written.
164	!-- Output dimensions chosen
165	if = 1
166	l = MAX( 2, LEN_TRIM( do2d(av,if) ) )
167	do2d_mode = do2d(av,if)(l-1:l)
168
169	DO WHILE ( do2d(av,if)(1:1) /= ' ' )
170
171	IF ( do2d_mode == mode ) THEN
172	!
173	!-- Store the array chosen on the temporary array.
174	resorted = .FALSE.
175	SELECT CASE ( TRIM( do2d(av,if) ) )
176
177	CASE ( 'e_xy', 'e_xz', 'e_yz' )
178	IF ( av == 0 ) THEN
179	to_be_resorted => e
180	ELSE
181	to_be_resorted => e_av
182	ENDIF
183	IF ( mode == 'xy' ) level_z = zu
184
185	CASE ( 'lwp*_xy' ) ! 2d-array
186	IF ( av == 0 ) THEN
187	DO i = nxl-1, nxr+1
188	DO j = nys-1, nyn+1
189	local_pf(i,j,nzb+1) = SUM( ql(nzb:nzt,j,i) * &
190	dzw(1:nzt+1) )
191	ENDDO
192	ENDDO
193	ELSE
194	DO i = nxl-1, nxr+1
195	DO j = nys-1, nyn+1
196	local_pf(i,j,nzb+1) = lwp_av(j,i)
197	ENDDO
198	ENDDO
199	ENDIF
200	resorted = .TRUE.
201	two_d = .TRUE.
202	level_z(nzb+1) = zu(nzb+1)
203
204	CASE ( 'p_xy', 'p_xz', 'p_yz' )
205	IF ( av == 0 ) THEN
206	to_be_resorted => p
207	ELSE
208	to_be_resorted => p_av
209	ENDIF
210	IF ( mode == 'xy' ) level_z = zu
211
212	CASE ( 'pc_xy', 'pc_xz', 'pc_yz' ) ! particle concentration
213	IF ( av == 0 ) THEN
214	tend = prt_count
215	CALL exchange_horiz( tend )
216	DO i = nxl-1, nxr+1
217	DO j = nys-1, nyn+1
218	DO k = nzb, nzt+1
219	local_pf(i,j,k) = tend(k,j,i)
220	ENDDO
221	ENDDO
222	ENDDO
223	resorted = .TRUE.
224	ELSE
225	CALL exchange_horiz( pc_av )
226	to_be_resorted => pc_av
227	ENDIF
228
229	CASE ( 'pr_xy', 'pr_xz', 'pr_yz' ) ! mean particle radius
230	IF ( av == 0 ) THEN
231	DO i = nxl, nxr
232	DO j = nys, nyn
233	DO k = nzb, nzt+1
234	psi = prt_start_index(k,j,i)
235	s_r3 = 0.0
236	s_r4 = 0.0
237	DO n = psi, psi+prt_count(k,j,i)-1
238	s_r3 = s_r3 + particles(n)%radius**3
239	s_r4 = s_r4 + particles(n)%radius**4
240	ENDDO
241	IF ( s_r3 /= 0.0 ) THEN
242	mean_r = s_r4 / s_r3
243	ELSE
244	mean_r = 0.0
245	ENDIF
246	tend(k,j,i) = mean_r
247	ENDDO
248	ENDDO
249	ENDDO
250	CALL exchange_horiz( tend )
251	DO i = nxl-1, nxr+1
252	DO j = nys-1, nyn+1
253	DO k = nzb, nzt+1
254	local_pf(i,j,k) = tend(k,j,i)
255	ENDDO
256	ENDDO
257	ENDDO
258	resorted = .TRUE.
259	ELSE
260	CALL exchange_horiz( pr_av )
261	to_be_resorted => pr_av
262	ENDIF
263
264	CASE ( 'pra*_xy' ) ! 2d-array / integral quantity => no av
265	CALL exchange_horiz_2d( precipitation_amount )
266	DO i = nxl-1, nxr+1
267	DO j = nys-1, nyn+1
268	local_pf(i,j,nzb+1) = precipitation_amount(j,i)
269	ENDDO
270	ENDDO
271	precipitation_amount = 0.0 ! reset for next integ. interval
272	resorted = .TRUE.
273	two_d = .TRUE.
274	level_z(nzb+1) = zu(nzb+1)
275
276	CASE ( 'prr*_xy' ) ! 2d-array
277	IF ( av == 0 ) THEN
278	CALL exchange_horiz_2d( precipitation_rate )
279	DO i = nxl-1, nxr+1
280	DO j = nys-1, nyn+1
281	local_pf(i,j,nzb+1) = precipitation_rate(j,i)
282	ENDDO
283	ENDDO
284	ELSE
285	CALL exchange_horiz_2d( precipitation_rate_av )
286	DO i = nxl-1, nxr+1
287	DO j = nys-1, nyn+1
288	local_pf(i,j,nzb+1) = precipitation_rate_av(j,i)
289	ENDDO
290	ENDDO
291	ENDIF
292	resorted = .TRUE.
293	two_d = .TRUE.
294	level_z(nzb+1) = zu(nzb+1)
295
296	CASE ( 'pt_xy', 'pt_xz', 'pt_yz' )
297	IF ( av == 0 ) THEN
298	IF ( .NOT. cloud_physics ) THEN
299	to_be_resorted => pt
300	ELSE
301	DO i = nxl-1, nxr+1
302	DO j = nys-1, nyn+1
303	DO k = nzb, nzt+1
304	local_pf(i,j,k) = pt(k,j,i) + l_d_cp * &
305	pt_d_t(k) * &
306	ql(k,j,i)
307	ENDDO
308	ENDDO
309	ENDDO
310	resorted = .TRUE.
311	ENDIF
312	ELSE
313	to_be_resorted => pt_av
314	ENDIF
315	IF ( mode == 'xy' ) level_z = zu
316
317	CASE ( 'q_xy', 'q_xz', 'q_yz' )
318	IF ( av == 0 ) THEN
319	to_be_resorted => q
320	ELSE
321	to_be_resorted => q_av
322	ENDIF
323	IF ( mode == 'xy' ) level_z = zu
324
325	CASE ( 'ql_xy', 'ql_xz', 'ql_yz' )
326	IF ( av == 0 ) THEN
327	to_be_resorted => ql
328	ELSE
329	to_be_resorted => ql_av
330	ENDIF
331	IF ( mode == 'xy' ) level_z = zu
332
333	CASE ( 'ql_c_xy', 'ql_c_xz', 'ql_c_yz' )
334	IF ( av == 0 ) THEN
335	to_be_resorted => ql_c
336	ELSE
337	to_be_resorted => ql_c_av
338	ENDIF
339	IF ( mode == 'xy' ) level_z = zu
340
341	CASE ( 'ql_v_xy', 'ql_v_xz', 'ql_v_yz' )
342	IF ( av == 0 ) THEN
343	to_be_resorted => ql_v
344	ELSE
345	to_be_resorted => ql_v_av
346	ENDIF
347	IF ( mode == 'xy' ) level_z = zu
348
349	CASE ( 'ql_vp_xy', 'ql_vp_xz', 'ql_vp_yz' )
350	IF ( av == 0 ) THEN
351	to_be_resorted => ql_vp
352	ELSE
353	to_be_resorted => ql_vp_av
354	ENDIF
355	IF ( mode == 'xy' ) level_z = zu
356
357	CASE ( 'qv_xy', 'qv_xz', 'qv_yz' )
358	IF ( av == 0 ) THEN
359	DO i = nxl-1, nxr+1
360	DO j = nys-1, nyn+1
361	DO k = nzb, nzt+1
362	local_pf(i,j,k) = q(k,j,i) - ql(k,j,i)
363	ENDDO
364	ENDDO
365	ENDDO
366	resorted = .TRUE.
367	ELSE
368	to_be_resorted => qv_av
369	ENDIF
370	IF ( mode == 'xy' ) level_z = zu
371
372	CASE ( 's_xy', 's_xz', 's_yz' )
373	IF ( av == 0 ) THEN
374	to_be_resorted => q
375	ELSE
376	to_be_resorted => q_av
377	ENDIF
378
379	CASE ( 't*_xy' ) ! 2d-array
380	IF ( av == 0 ) THEN
381	DO i = nxl-1, nxr+1
382	DO j = nys-1, nyn+1
383	local_pf(i,j,nzb+1) = ts(j,i)
384	ENDDO
385	ENDDO
386	ELSE
387	DO i = nxl-1, nxr+1
388	DO j = nys-1, nyn+1
389	local_pf(i,j,nzb+1) = ts_av(j,i)
390	ENDDO
391	ENDDO
392	ENDIF
393	resorted = .TRUE.
394	two_d = .TRUE.
395	level_z(nzb+1) = zu(nzb+1)
396
397	CASE ( 'u_xy', 'u_xz', 'u_yz' )
398	IF ( av == 0 ) THEN
399	to_be_resorted => u
400	ELSE
401	to_be_resorted => u_av
402	ENDIF
403	IF ( mode == 'xy' ) level_z = zu
404	!
405	!-- Substitute the values generated by "mirror" boundary condition
406	!-- at the bottom boundary by the real surface values.
407	IF ( do2d(av,if) == 'u_xz' .OR. do2d(av,if) == 'u_yz' ) THEN
408	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
409	ENDIF
410
411	CASE ( 'u*_xy' ) ! 2d-array
412	IF ( av == 0 ) THEN
413	DO i = nxl-1, nxr+1
414	DO j = nys-1, nyn+1
415	local_pf(i,j,nzb+1) = us(j,i)
416	ENDDO
417	ENDDO
418	ELSE
419	DO i = nxl-1, nxr+1
420	DO j = nys-1, nyn+1
421	local_pf(i,j,nzb+1) = us_av(j,i)
422	ENDDO
423	ENDDO
424	ENDIF
425	resorted = .TRUE.
426	two_d = .TRUE.
427	level_z(nzb+1) = zu(nzb+1)
428
429	CASE ( 'v_xy', 'v_xz', 'v_yz' )
430	IF ( av == 0 ) THEN
431	to_be_resorted => v
432	ELSE
433	to_be_resorted => v_av
434	ENDIF
435	IF ( mode == 'xy' ) level_z = zu
436	!
437	!-- Substitute the values generated by "mirror" boundary condition
438	!-- at the bottom boundary by the real surface values.
439	IF ( do2d(av,if) == 'v_xz' .OR. do2d(av,if) == 'v_yz' ) THEN
440	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0
441	ENDIF
442
443	CASE ( 'vpt_xy', 'vpt_xz', 'vpt_yz' )
444	IF ( av == 0 ) THEN
445	to_be_resorted => vpt
446	ELSE
447	to_be_resorted => vpt_av
448	ENDIF
449	IF ( mode == 'xy' ) level_z = zu
450
451	CASE ( 'w_xy', 'w_xz', 'w_yz' )
452	IF ( av == 0 ) THEN
453	to_be_resorted => w
454	ELSE
455	to_be_resorted => w_av
456	ENDIF
457	IF ( mode == 'xy' ) level_z = zw
458
459	CASE ( 'z0*_xy' ) ! 2d-array
460	IF ( av == 0 ) THEN
461	DO i = nxl-1, nxr+1
462	DO j = nys-1, nyn+1
463	local_pf(i,j,nzb+1) = z0(j,i)
464	ENDDO
465	ENDDO
466	ELSE
467	DO i = nxl-1, nxr+1
468	DO j = nys-1, nyn+1
469	local_pf(i,j,nzb+1) = z0_av(j,i)
470	ENDDO
471	ENDDO
472	ENDIF
473	resorted = .TRUE.
474	two_d = .TRUE.
475	level_z(nzb+1) = zu(nzb+1)
476
477	CASE DEFAULT
478	!
479	!-- User defined quantity
480	CALL user_data_output_2d( av, do2d(av,if), found, grid, &
481	local_pf )
482	resorted = .TRUE.
483
484	IF ( grid == 'zu' ) THEN
485	IF ( mode == 'xy' ) level_z = zu
486	ELSEIF ( grid == 'zw' ) THEN
487	IF ( mode == 'xy' ) level_z = zw
488	ENDIF
489
490	IF ( .NOT. found ) THEN
491	PRINT*, '+++ data_output_2d: no output provided for: ', &
492	do2d(av,if)
493	ENDIF
494
495	END SELECT
496
497	!
498	!-- Resort the array to be output, if not done above
499	IF ( .NOT. resorted ) THEN
500	DO i = nxl-1, nxr+1
501	DO j = nys-1, nyn+1
502	DO k = nzb, nzt+1
503	local_pf(i,j,k) = to_be_resorted(k,j,i)
504	ENDDO
505	ENDDO
506	ENDDO
507	ENDIF
508
509	!
510	!-- Output of the individual cross-sections, depending on the cross-
511	!-- section mode chosen.
512	is = 1
513	loop1: DO WHILE ( section(is,s) /= -9999 .OR. two_d )
514
515	SELECT CASE ( mode )
516
517	CASE ( 'xy' )
518	!
519	!-- Determine the cross section index
520	IF ( two_d ) THEN
521	layer_xy = nzb+1
522	ELSE
523	layer_xy = section(is,s)
524	ENDIF
525
526	!
527	!-- Update the NetCDF xy cross section time axis
528	IF ( myid == 0 ) THEN
529	IF ( simulated_time /= do2d_xy_last_time(av) ) THEN
530	do2d_xy_time_count(av) = do2d_xy_time_count(av) + 1
531	do2d_xy_last_time(av) = simulated_time
532	IF ( .NOT. data_output_2d_on_each_pe .AND. &
533	netcdf_output ) THEN
534	#if defined( __netcdf )
535	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
536	id_var_time_xy(av), &
537	(/ simulated_time /), &
538	start = (/ do2d_xy_time_count(av) /), &
539	count = (/ 1 /) )
540	IF ( nc_stat /= NF90_NOERR ) THEN
541	CALL handle_netcdf_error( 53 )
542	ENDIF
543	#endif
544	ENDIF
545	ENDIF
546	ENDIF
547	!
548	!-- If required, carry out averaging along z
549	IF ( section(is,s) == -1 ) THEN
550
551	local_2d = 0.0
552	!
553	!-- Carry out the averaging (all data are on the PE)
554	DO k = nzb, nzt+1
555	DO j = nys-1, nyn+1
556	DO i = nxl-1, nxr+1
557	local_2d(i,j) = local_2d(i,j) + local_pf(i,j,k)
558	ENDDO
559	ENDDO
560	ENDDO
561
562	local_2d = local_2d / ( nzt -nzb + 2.0 )
563
564	ELSE
565	!
566	!-- Just store the respective section on the local array
567	local_2d = local_pf(:,:,layer_xy)
568
569	ENDIF
570
571	#if defined( __parallel )
572	IF ( data_output_2d_on_each_pe ) THEN
573	!
574	!-- Output of partial arrays on each PE
575	#if defined( __netcdf )
576	IF ( netcdf_output .AND. myid == 0 ) THEN
577	WRITE ( 21 ) simulated_time, do2d_xy_time_count(av), &
578	av
579	ENDIF
580	#endif
581	WRITE ( 21 ) nxl-1, nxr+1, nys-1, nyn+1
582	WRITE ( 21 ) local_2d
583
584	ELSE
585	!
586	!-- PE0 receives partial arrays from all processors and then
587	!-- outputs them. Here a barrier has to be set, because
588	!-- otherwise "-MPI- FATAL: Remote protocol queue full" may
589	!-- occur.
590	CALL MPI_BARRIER( comm2d, ierr )
591
592	ngp = ( nxr-nxl+3 ) * ( nyn-nys+3 )
593	IF ( myid == 0 ) THEN
594	!
595	!-- Local array can be relocated directly.
596	total_2d(nxl-1:nxr+1,nys-1:nyn+1) = local_2d
597	!
598	!-- Receive data from all other PEs.
599	DO n = 1, numprocs-1
600	!
601	!-- Receive index limits first, then array.
602	!-- Index limits are received in arbitrary order from
603	!-- the PEs.
604	CALL MPI_RECV( ind(1), 4, MPI_INTEGER, &
605	MPI_ANY_SOURCE, 0, comm2d, status, &
606	ierr )
607	sender = status(MPI_SOURCE)
608	DEALLOCATE( local_2d )
609	ALLOCATE( local_2d(ind(1):ind(2),ind(3):ind(4)) )
610	CALL MPI_RECV( local_2d(ind(1),ind(3)), ngp, &
611	MPI_REAL, sender, 1, comm2d, &
612	status, ierr )
613	total_2d(ind(1):ind(2),ind(3):ind(4)) = local_2d
614	ENDDO
615	!
616	!-- Output of the total cross-section.
617	IF ( iso2d_output ) WRITE (21) total_2d(0:nx+1,0:ny+1)
618	!
619	!-- Relocate the local array for the next loop increment
620	DEALLOCATE( local_2d )
621	ALLOCATE( local_2d(nxl-1:nxr+1,nys-1:nyn+1) )
622
623	#if defined( __netcdf )
624	IF ( netcdf_output ) THEN
625	IF ( two_d ) THEN
626	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
627	id_var_do2d(av,if), &
628	total_2d(0:nx+1,0:ny+1), &
629	start = (/ 1, 1, 1, do2d_xy_time_count(av) /), &
630	count = (/ nx+2, ny+2, 1, 1 /) )
631	ELSE
632	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
633	id_var_do2d(av,if), &
634	total_2d(0:nx+1,0:ny+1), &
635	start = (/ 1, 1, is, do2d_xy_time_count(av) /), &
636	count = (/ nx+2, ny+2, 1, 1 /) )
637	ENDIF
638	IF ( nc_stat /= NF90_NOERR ) &
639	CALL handle_netcdf_error( 54 )
640	ENDIF
641	#endif
642
643	ELSE
644	!
645	!-- First send the local index limits to PE0
646	ind(1) = nxl-1; ind(2) = nxr+1
647	ind(3) = nys-1; ind(4) = nyn+1
648	CALL MPI_SEND( ind(1), 4, MPI_INTEGER, 0, 0, comm2d, &
649	ierr )
650	!
651	!-- Send data to PE0
652	CALL MPI_SEND( local_2d(nxl-1,nys-1), ngp, MPI_REAL, &
653	0, 1, comm2d, ierr )
654	ENDIF
655	!
656	!-- A barrier has to be set, because otherwise some PEs may
657	!-- proceed too fast so that PE0 may receive wrong data on
658	!-- tag 0
659	CALL MPI_BARRIER( comm2d, ierr )
660	ENDIF
661	#else
662	IF ( iso2d_output ) THEN
663	WRITE (21) local_2d(nxl:nxr+1,nys:nyn+1)
664	ENDIF
665	#if defined( __netcdf )
666	IF ( netcdf_output ) THEN
667	IF ( two_d ) THEN
668	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
669	id_var_do2d(av,if), &
670	local_2d(nxl:nxr+1,nys:nyn+1), &
671	start = (/ 1, 1, 1, do2d_xy_time_count(av) /), &
672	count = (/ nx+2, ny+2, 1, 1 /) )
673	ELSE
674	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
675	id_var_do2d(av,if), &
676	local_2d(nxl:nxr+1,nys:nyn+1), &
677	start = (/ 1, 1, is, do2d_xy_time_count(av) /), &
678	count = (/ nx+2, ny+2, 1, 1 /) )
679	ENDIF
680	IF ( nc_stat /= NF90_NOERR ) &
681	CALL handle_netcdf_error( 55 )
682	ENDIF
683	#endif
684	#endif
685	do2d_xy_n = do2d_xy_n + 1
686	!
687	!-- Write LOCAL parameter set for ISO2D.
688	IF ( myid == 0 .AND. iso2d_output ) THEN
689	IF ( section(is,s) /= -1 ) THEN
690	WRITE ( section_chr, '(''z = '',F7.2,'' m (GP '',I3, &
691	&'')'')' &
692	) level_z(layer_xy), layer_xy
693	ELSE
694	section_chr = 'averaged along z'
695	ENDIF
696	IF ( av == 0 ) THEN
697	rtext = TRIM( do2d(av,if) ) // ' t = ' // &
698	TRIM( simulated_time_chr ) // ' ' // &
699	TRIM( section_chr )
700	ELSE
701	rtext = TRIM( do2d(av,if) ) // ' averaged t = ' // &
702	TRIM( simulated_time_chr ) // ' ' // &
703	TRIM( section_chr )
704	ENDIF
705	WRITE (27,LOCAL)
706	ENDIF
707	!
708	!-- For 2D-arrays (e.g. u*) only one cross-section is available.
709	!-- Hence exit loop of output levels.
710	IF ( two_d ) THEN
711	two_d = .FALSE.
712	EXIT loop1
713	ENDIF
714
715	CASE ( 'xz' )
716	!
717	!-- Update the NetCDF xy cross section time axis
718	IF ( myid == 0 ) THEN
719	IF ( simulated_time /= do2d_xz_last_time(av) ) THEN
720	do2d_xz_time_count(av) = do2d_xz_time_count(av) + 1
721	do2d_xz_last_time(av) = simulated_time
722	IF ( .NOT. data_output_2d_on_each_pe .AND. &
723	netcdf_output ) THEN
724	#if defined( __netcdf )
725	nc_stat = NF90_PUT_VAR( id_set_xz(av), &
726	id_var_time_xz(av), &
727	(/ simulated_time /), &
728	start = (/ do2d_xz_time_count(av) /), &
729	count = (/ 1 /) )
730	IF ( nc_stat /= NF90_NOERR ) THEN
731	CALL handle_netcdf_error( 56 )
732	ENDIF
733	#endif
734	ENDIF
735	ENDIF
736	ENDIF
737	!
738	!-- If required, carry out averaging along y
739	IF ( section(is,s) == -1 ) THEN
740
741	ALLOCATE( local_2d_l(nxl-1:nxr+1,nzb:nzt+1) )
742	local_2d_l = 0.0
743	ngp = ( nxr-nxl+3 ) * ( nzt-nzb+2 )
744	!
745	!-- First local averaging on the PE
746	DO k = nzb, nzt+1
747	DO j = nys, nyn
748	DO i = nxl-1, nxr+1
749	local_2d_l(i,k) = local_2d_l(i,k) + &
750	local_pf(i,j,k)
751	ENDDO
752	ENDDO
753	ENDDO
754	#if defined( __parallel )
755	!
756	!-- Now do the averaging over all PEs along y
757	CALL MPI_ALLREDUCE( local_2d_l(nxl-1,nzb), &
758	local_2d(nxl-1,nzb), ngp, MPI_REAL, &
759	MPI_SUM, comm1dy, ierr )
760	#else
761	local_2d = local_2d_l
762	#endif
763	local_2d = local_2d / ( ny + 1.0 )
764
765	DEALLOCATE( local_2d_l )
766
767	ELSE
768	!
769	!-- Just store the respective section on the local array
770	!-- (but only if it is available on this PE!)
771	IF ( section(is,s) >= nys .AND. section(is,s) <= nyn ) &
772	THEN
773	local_2d = local_pf(:,section(is,s),nzb:nzt+1)
774	ENDIF
775
776	ENDIF
777
778	#if defined( __parallel )
779	IF ( data_output_2d_on_each_pe ) THEN
780	!
781	!-- Output of partial arrays on each PE. If the cross section
782	!-- does not reside on the PE, output special index values.
783	#if defined( __netcdf )
784	IF ( netcdf_output .AND. myid == 0 ) THEN
785	WRITE ( 22 ) simulated_time, do2d_xz_time_count(av), &
786	av
787	ENDIF
788	#endif
789	IF ( ( section(is,s)>=nys .AND. section(is,s)<=nyn ) .OR.&
790	( section(is,s) == -1 .AND. nys-1 == -1 ) ) &
791	THEN
792	WRITE (22) nxl-1, nxr+1, nzb, nzt+1
793	WRITE (22) local_2d
794	ELSE
795	WRITE (22) -1, -1, -1, -1
796	ENDIF
797
798	ELSE
799	!
800	!-- PE0 receives partial arrays from all processors of the
801	!-- respective cross section and outputs them. Here a
802	!-- barrier has to be set, because otherwise
803	!-- "-MPI- FATAL: Remote protocol queue full" may occur.
804	CALL MPI_BARRIER( comm2d, ierr )
805
806	ngp = ( nxr-nxl+3 ) * ( nzt-nzb+2 )
807	IF ( myid == 0 ) THEN
808	!
809	!-- Local array can be relocated directly.
810	IF ( ( section(is,s)>=nys .AND. section(is,s)<=nyn ) &
811	.OR. ( section(is,s) == -1 .AND. nys-1 == -1 ) ) &
812	THEN
813	total_2d(nxl-1:nxr+1,nzb:nzt+1) = local_2d
814	ENDIF
815	!
816	!-- Receive data from all other PEs.
817	DO n = 1, numprocs-1
818	!
819	!-- Receive index limits first, then array.
820	!-- Index limits are received in arbitrary order from
821	!-- the PEs.
822	CALL MPI_RECV( ind(1), 4, MPI_INTEGER, &
823	MPI_ANY_SOURCE, 0, comm2d, status, &
824	ierr )
825	!
826	!-- Not all PEs have data for XZ-cross-section.
827	IF ( ind(1) /= -9999 ) THEN
828	sender = status(MPI_SOURCE)
829	DEALLOCATE( local_2d )
830	ALLOCATE( local_2d(ind(1):ind(2),ind(3):ind(4)) )
831	CALL MPI_RECV( local_2d(ind(1),ind(3)), ngp, &
832	MPI_REAL, sender, 1, comm2d, &
833	status, ierr )
834	total_2d(ind(1):ind(2),ind(3):ind(4)) = local_2d
835	ENDIF
836	ENDDO
837	!
838	!-- Output of the total cross-section.
839	IF ( iso2d_output ) THEN
840	WRITE (22) total_2d(0:nx+1,nzb:nzt+1)
841	ENDIF
842	!
843	!-- Relocate the local array for the next loop increment
844	DEALLOCATE( local_2d )
845	ALLOCATE( local_2d(nxl-1:nxr+1,nzb:nzt+1) )
846
847	#if defined( __netcdf )
848	IF ( netcdf_output ) THEN
849	nc_stat = NF90_PUT_VAR( id_set_xz(av), &
850	id_var_do2d(av,if), &
851	total_2d(0:nx+1,nzb:nzt+1),&
852	start = (/ 1, is, 1, do2d_xz_time_count(av) /), &
853	count = (/ nx+2, 1, nz+2, 1 /) )
854	IF ( nc_stat /= NF90_NOERR ) &
855	CALL handle_netcdf_error( 57 )
856	ENDIF
857	#endif
858
859	ELSE
860	!
861	!-- If the cross section resides on the PE, send the
862	!-- local index limits, otherwise send -9999 to PE0.
863	IF ( ( section(is,s)>=nys .AND. section(is,s)<=nyn ) &
864	.OR. ( section(is,s) == -1 .AND. nys-1 == -1 ) ) &
865	THEN
866	ind(1) = nxl-1; ind(2) = nxr+1
867	ind(3) = nzb; ind(4) = nzt+1
868	ELSE
869	ind(1) = -9999; ind(2) = -9999
870	ind(3) = -9999; ind(4) = -9999
871	ENDIF
872	CALL MPI_SEND( ind(1), 4, MPI_INTEGER, 0, 0, comm2d, &
873	ierr )
874	!
875	!-- If applicable, send data to PE0.
876	IF ( ind(1) /= -9999 ) THEN
877	CALL MPI_SEND( local_2d(nxl-1,nzb), ngp, MPI_REAL, &
878	0, 1, comm2d, ierr )
879	ENDIF
880	ENDIF
881	!
882	!-- A barrier has to be set, because otherwise some PEs may
883	!-- proceed too fast so that PE0 may receive wrong data on
884	!-- tag 0
885	CALL MPI_BARRIER( comm2d, ierr )
886	ENDIF
887	#else
888	IF ( iso2d_output ) THEN
889	WRITE (22) local_2d(nxl:nxr+1,nzb:nzt+1)
890	ENDIF
891	#if defined( __netcdf )
892	IF ( netcdf_output ) THEN
893	nc_stat = NF90_PUT_VAR( id_set_xz(av), &
894	id_var_do2d(av,if), &
895	local_2d(nxl:nxr+1,nzb:nzt+1), &
896	start = (/ 1, is, 1, do2d_xz_time_count(av) /), &
897	count = (/ nx+2, 1, nz+2, 1 /) )
898	IF ( nc_stat /= NF90_NOERR ) &
899	CALL handle_netcdf_error( 58 )
900	ENDIF
901	#endif
902	#endif
903	do2d_xz_n = do2d_xz_n + 1
904	!
905	!-- Write LOCAL-parameter set for ISO2D.
906	IF ( myid == 0 .AND. iso2d_output ) THEN
907	IF ( section(is,s) /= -1 ) THEN
908	WRITE ( section_chr, '(''y = '',F8.2,'' m (GP '',I3, &
909	&'')'')' &
910	) section(is,s)*dy, section(is,s)
911	ELSE
912	section_chr = 'averaged along y'
913	ENDIF
914	IF ( av == 0 ) THEN
915	rtext = TRIM( do2d(av,if) ) // ' t = ' // &
916	TRIM( simulated_time_chr ) // ' ' // &
917	TRIM( section_chr )
918	ELSE
919	rtext = TRIM( do2d(av,if) ) // ' averaged t = ' // &
920	TRIM( simulated_time_chr ) // ' ' // &
921	TRIM( section_chr )
922	ENDIF
923	WRITE (28,LOCAL)
924	ENDIF
925
926	CASE ( 'yz' )
927	!
928	!-- Update the NetCDF xy cross section time axis
929	IF ( myid == 0 ) THEN
930	IF ( simulated_time /= do2d_yz_last_time(av) ) THEN
931	do2d_yz_time_count(av) = do2d_yz_time_count(av) + 1
932	do2d_yz_last_time(av) = simulated_time
933	IF ( .NOT. data_output_2d_on_each_pe .AND. &
934	netcdf_output ) THEN
935	#if defined( __netcdf )
936	nc_stat = NF90_PUT_VAR( id_set_yz(av), &
937	id_var_time_yz(av), &
938	(/ simulated_time /), &
939	start = (/ do2d_yz_time_count(av) /), &
940	count = (/ 1 /) )
941	IF ( nc_stat /= NF90_NOERR ) THEN
942	CALL handle_netcdf_error( 59 )
943	ENDIF
944	#endif
945	ENDIF
946	ENDIF
947	ENDIF
948	!
949	!-- If required, carry out averaging along x
950	IF ( section(is,s) == -1 ) THEN
951
952	ALLOCATE( local_2d_l(nys-1:nyn+1,nzb:nzt+1) )
953	local_2d_l = 0.0
954	ngp = ( nyn-nys+3 ) * ( nzt-nzb+2 )
955	!
956	!-- First local averaging on the PE
957	DO k = nzb, nzt+1
958	DO j = nys-1, nyn+1
959	DO i = nxl, nxr
960	local_2d_l(j,k) = local_2d_l(j,k) + &
961	local_pf(i,j,k)
962	ENDDO
963	ENDDO
964	ENDDO
965	#if defined( __parallel )
966	!
967	!-- Now do the averaging over all PEs along x
968	CALL MPI_ALLREDUCE( local_2d_l(nys-1,nzb), &
969	local_2d(nys-1,nzb), ngp, MPI_REAL, &
970	MPI_SUM, comm1dx, ierr )
971	#else
972	local_2d = local_2d_l
973	#endif
974	local_2d = local_2d / ( nx + 1.0 )
975
976	DEALLOCATE( local_2d_l )
977
978	ELSE
979	!
980	!-- Just store the respective section on the local array
981	!-- (but only if it is available on this PE!)
982	IF ( section(is,s) >= nxl .AND. section(is,s) <= nxr ) &
983	THEN
984	local_2d = local_pf(section(is,s),:,nzb:nzt+1)
985	ENDIF
986
987	ENDIF
988
989	#if defined( __parallel )
990	IF ( data_output_2d_on_each_pe ) THEN
991	!
992	!-- Output of partial arrays on each PE. If the cross section
993	!-- does not reside on the PE, output special index values.
994	#if defined( __netcdf )
995	IF ( netcdf_output .AND. myid == 0 ) THEN
996	WRITE ( 23 ) simulated_time, do2d_yz_time_count(av), &
997	av
998	ENDIF
999	#endif
1000	IF ( ( section(is,s)>=nxl .AND. section(is,s)<=nxr ) .OR.&
1001	( section(is,s) == -1 .AND. nxl-1 == -1 ) ) &
1002	THEN
1003	WRITE (23) nys-1, nyn+1, nzb, nzt+1
1004	WRITE (23) local_2d
1005	ELSE
1006	WRITE (23) -1, -1, -1, -1
1007	ENDIF
1008
1009	ELSE
1010	!
1011	!-- PE0 receives partial arrays from all processors of the
1012	!-- respective cross section and outputs them. Here a
1013	!-- barrier has to be set, because otherwise
1014	!-- "-MPI- FATAL: Remote protocol queue full" may occur.
1015	CALL MPI_BARRIER( comm2d, ierr )
1016
1017	ngp = ( nyn-nys+3 ) * ( nzt-nzb+2 )
1018	IF ( myid == 0 ) THEN
1019	!
1020	!-- Local array can be relocated directly.
1021	IF ( ( section(is,s)>=nxl .AND. section(is,s)<=nxr ) &
1022	.OR. ( section(is,s) == -1 .AND. nxl-1 == -1 ) ) &
1023	THEN
1024	total_2d(nys-1:nyn+1,nzb:nzt+1) = local_2d
1025	ENDIF
1026	!
1027	!-- Receive data from all other PEs.
1028	DO n = 1, numprocs-1
1029	!
1030	!-- Receive index limits first, then array.
1031	!-- Index limits are received in arbitrary order from
1032	!-- the PEs.
1033	CALL MPI_RECV( ind(1), 4, MPI_INTEGER, &
1034	MPI_ANY_SOURCE, 0, comm2d, status, &
1035	ierr )
1036	!
1037	!-- Not all PEs have data for YZ-cross-section.
1038	IF ( ind(1) /= -9999 ) THEN
1039	sender = status(MPI_SOURCE)
1040	DEALLOCATE( local_2d )
1041	ALLOCATE( local_2d(ind(1):ind(2),ind(3):ind(4)) )
1042	CALL MPI_RECV( local_2d(ind(1),ind(3)), ngp, &
1043	MPI_REAL, sender, 1, comm2d, &
1044	status, ierr )
1045	total_2d(ind(1):ind(2),ind(3):ind(4)) = local_2d
1046	ENDIF
1047	ENDDO
1048	!
1049	!-- Output of the total cross-section.
1050	IF ( iso2d_output ) THEN
1051	WRITE (23) total_2d(0:ny+1,nzb:nzt+1)
1052	ENDIF
1053	!
1054	!-- Relocate the local array for the next loop increment
1055	DEALLOCATE( local_2d )
1056	ALLOCATE( local_2d(nys-1:nyn+1,nzb:nzt+1) )
1057
1058	#if defined( __netcdf )
1059	IF ( netcdf_output ) THEN
1060	nc_stat = NF90_PUT_VAR( id_set_yz(av), &
1061	id_var_do2d(av,if), &
1062	total_2d(0:ny+1,nzb:nzt+1),&
1063	start = (/ is, 1, 1, do2d_yz_time_count(av) /), &
1064	count = (/ 1, ny+2, nz+2, 1 /) )
1065	IF ( nc_stat /= NF90_NOERR ) &
1066	CALL handle_netcdf_error( 60 )
1067	ENDIF
1068	#endif
1069
1070	ELSE
1071	!
1072	!-- If the cross section resides on the PE, send the
1073	!-- local index limits, otherwise send -9999 to PE0.
1074	IF ( ( section(is,s)>=nxl .AND. section(is,s)<=nxr ) &
1075	.OR. ( section(is,s) == -1 .AND. nxl-1 == -1 ) ) &
1076	THEN
1077	ind(1) = nys-1; ind(2) = nyn+1
1078	ind(3) = nzb; ind(4) = nzt+1
1079	ELSE
1080	ind(1) = -9999; ind(2) = -9999
1081	ind(3) = -9999; ind(4) = -9999
1082	ENDIF
1083	CALL MPI_SEND( ind(1), 4, MPI_INTEGER, 0, 0, comm2d, &
1084	ierr )
1085	!
1086	!-- If applicable, send data to PE0.
1087	IF ( ind(1) /= -9999 ) THEN
1088	CALL MPI_SEND( local_2d(nys-1,nzb), ngp, MPI_REAL, &
1089	0, 1, comm2d, ierr )
1090	ENDIF
1091	ENDIF
1092	!
1093	!-- A barrier has to be set, because otherwise some PEs may
1094	!-- proceed too fast so that PE0 may receive wrong data on
1095	!-- tag 0
1096	CALL MPI_BARRIER( comm2d, ierr )
1097	ENDIF
1098	#else
1099	IF ( iso2d_output ) THEN
1100	WRITE (23) local_2d(nys:nyn+1,nzb:nzt+1)
1101	ENDIF
1102	#if defined( __netcdf )
1103	IF ( netcdf_output ) THEN
1104	nc_stat = NF90_PUT_VAR( id_set_yz(av), &
1105	id_var_do2d(av,if), &
1106	local_2d(nys:nyn+1,nzb:nzt+1), &
1107	start = (/ is, 1, 1, do2d_xz_time_count(av) /), &
1108	count = (/ 1, ny+2, nz+2, 1 /) )
1109	IF ( nc_stat /= NF90_NOERR ) &
1110	CALL handle_netcdf_error( 61 )
1111	ENDIF
1112	#endif
1113	#endif
1114	do2d_yz_n = do2d_yz_n + 1
1115	!
1116	!-- Write LOCAL-parameter set for ISO2D.
1117	IF ( myid == 0 .AND. iso2d_output ) THEN
1118	IF ( section(is,s) /= -1 ) THEN
1119	WRITE ( section_chr, '(''x = '',F8.2,'' m (GP '',I3, &
1120	&'')'')' &
1121	) section(is,s)*dx, section(is,s)
1122	ELSE
1123	section_chr = 'averaged along x'
1124	ENDIF
1125	IF ( av == 0 ) THEN
1126	rtext = TRIM( do2d(av,if) ) // ' t = ' // &
1127	TRIM( simulated_time_chr ) // ' ' // &
1128	TRIM( section_chr )
1129	ELSE
1130	rtext = TRIM( do2d(av,if) ) // ' averaged t = ' // &
1131	TRIM( simulated_time_chr ) // ' ' // &
1132	TRIM( section_chr )
1133	ENDIF
1134	WRITE (29,LOCAL)
1135	ENDIF
1136
1137	END SELECT
1138
1139	is = is + 1
1140	ENDDO loop1
1141
1142	ENDIF
1143
1144	if = if + 1
1145	l = MAX( 2, LEN_TRIM( do2d(av,if) ) )
1146	do2d_mode = do2d(av,if)(l-1:l)
1147
1148	ENDDO
1149
1150	!
1151	!-- Deallocate temporary arrays.
1152	IF ( ALLOCATED( level_z ) ) DEALLOCATE( level_z )
1153	DEALLOCATE( local_pf, local_2d )
1154	#if defined( __parallel )
1155	IF ( .NOT. data_output_2d_on_each_pe .AND. myid == 0 ) THEN
1156	DEALLOCATE( total_2d )
1157	ENDIF
1158	#endif
1159
1160	!
1161	!-- Close plot output file.
1162	file_id = 20 + s
1163
1164	IF ( data_output_2d_on_each_pe ) THEN
1165	CALL close_file( file_id )
1166	ELSE
1167	IF ( myid == 0 ) CALL close_file( file_id )
1168	ENDIF
1169
1170
1171	CALL cpu_log (log_point(3),'data_output_2d','stop','nobarrier')
1172
1173	END SUBROUTINE data_output_2d

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/data_output_2d.f90 @ 80

Download in other formats: