Home

Context Navigation

source: palm/trunk/SOURCE/data_output_2d.f90 @ 4467

Last change on this file since 4467 was 4457, checked in by raasch, 5 years ago
ghost point exchange modularized, bugfix for wrong 2d-exchange
Property svn:keywords set to `Id`
File size: 89.0 KB

Rev	Line
[1682]	1	!> @file data_output_2d.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[4360]	17	! Copyright 1997-2020 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[3569]	21	! ------------------
[1961]	22	!
[4442]	23	!
[1552]	24	! Former revisions:
	25	! -----------------
	26	! $Id: data_output_2d.f90 4457 2020-03-11 14:20:43Z maronga $
[4457]	27	! use statement for exchange horiz added
	28	!
	29	! 4444 2020-03-05 15:59:50Z raasch
[4444]	30	! bugfix: cpp-directives for serial mode added
	31	!
	32	! 4442 2020-03-04 19:21:13Z suehring
[4442]	33	! Change order of dimension in surface array %frac to allow for better
	34	! vectorization.
	35	!
	36	! 4441 2020-03-04 19:20:35Z suehring
[4346]	37	! Introduction of wall_flags_total_0, which currently sets bits based on static
	38	! topography information used in wall_flags_static_0
	39	!
	40	! 4331 2019-12-10 18:25:02Z suehring
[4331]	41	! Move 2-m potential temperature output to diagnostic_output_quantities
	42	!
	43	! 4329 2019-12-10 15:46:36Z motisi
[4329]	44	! Renamed wall_flags_0 to wall_flags_static_0
	45	!
	46	! 4182 2019-08-22 15:20:23Z scharf
[4182]	47	! Corrected "Former revisions" section
	48	!
	49	! 4048 2019-06-21 21:00:21Z knoop
[4048]	50	! Removed turbulence_closure_mod dependency
	51	!
	52	! 4039 2019-06-18 10:32:41Z suehring
[4039]	53	! modularize diagnostic output
	54	!
	55	! 3994 2019-05-22 18:08:09Z suehring
[3994]	56	! output of turbulence intensity added
	57	!
	58	! 3987 2019-05-22 09:52:13Z kanani
[3987]	59	! Introduce alternative switch for debug output during timestepping
	60	!
	61	! 3943 2019-05-02 09:50:41Z maronga
[3943]	62	! Added output of qsws for green roofs.
	63	!
	64	! 3885 2019-04-11 11:29:34Z kanani
[3885]	65	! Changes related to global restructuring of location messages and introduction
	66	! of additional debug messages
	67	!
	68	! 3766 2019-02-26 16:23:41Z raasch
[3766]	69	! unused variables removed
	70	!
	71	! 3655 2019-01-07 16:51:22Z knoop
[3646]	72	! Bugfix: use time_since_reference_point instead of simulated_time (relevant
	73	! when using wall/soil spinup)
[3569]	74	!
[4182]	75	! Revision 1.1 1997/08/11 06:24:09 raasch
	76	! Initial revision
	77	!
	78	!
[1]	79	! Description:
	80	! ------------
[2512]	81	!> Data output of cross-sections in netCDF format or binary format
	82	!> to be later converted to NetCDF by helper routine combine_plot_fields.
[1682]	83	!> Attention: The position of the sectional planes is still not always computed
	84	!> --------- correctly. (zu is used always)!
[1]	85	!------------------------------------------------------------------------------!
[1682]	86	SUBROUTINE data_output_2d( mode, av )
	87
[1]	88
[3766]	89	USE arrays_3d, &
	90	ONLY: dzw, d_exner, e, heatflux_output_conversion, p, pt, q, ql, ql_c, ql_v, s, tend, u, &
	91	v, vpt, w, waterflux_output_conversion, zu, zw
[3274]	92
[1]	93	USE averaging
[3274]	94
	95	USE basic_constants_and_equations_mod, &
	96	ONLY: c_p, lv_d_cp, l_v
	97
	98	USE bulk_cloud_model_mod, &
[3637]	99	ONLY: bulk_cloud_model
[3274]	100
[1320]	101	USE control_parameters, &
[3637]	102	ONLY: data_output_2d_on_each_pe, &
[3885]	103	data_output_xy, data_output_xz, data_output_yz, &
[3987]	104	debug_output_timestep, &
[3885]	105	do2d, &
[2277]	106	do2d_xy_last_time, do2d_xy_time_count, &
	107	do2d_xz_last_time, do2d_xz_time_count, &
	108	do2d_yz_last_time, do2d_yz_time_count, &
[3637]	109	ibc_uv_b, io_blocks, io_group, message_string, &
[1822]	110	ntdim_2d_xy, ntdim_2d_xz, ntdim_2d_yz, &
[3646]	111	psolver, section, &
[3569]	112	time_since_reference_point
[3274]	113
[1320]	114	USE cpulog, &
[3637]	115	ONLY: cpu_log, log_point
[3274]	116
[4457]	117	USE exchange_horiz_mod, &
	118	ONLY: exchange_horiz
	119
[1320]	120	USE indices, &
[3241]	121	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, &
[4346]	122	nzb, nzt, wall_flags_total_0
[3274]	123
[1320]	124	USE kinds
[3274]	125
[1551]	126	USE land_surface_model_mod, &
[3637]	127	ONLY: zs
[3274]	128
[3637]	129	USE module_interface, &
	130	ONLY: module_interface_data_output_2d
	131
[1783]	132	#if defined( __netcdf )
	133	USE NETCDF
	134	#endif
[1320]	135
[1783]	136	USE netcdf_interface, &
[2696]	137	ONLY: fill_value, id_set_xy, id_set_xz, id_set_yz, id_var_do2d, &
	138	id_var_time_xy, id_var_time_xz, id_var_time_yz, nc_stat, &
	139	netcdf_data_format, netcdf_handle_error
[1783]	140
[1320]	141	USE particle_attributes, &
[1359]	142	ONLY: grid_particles, number_of_particles, particle_advection_start, &
	143	particles, prt_count
[1320]	144
[1]	145	USE pegrid
	146
[2232]	147	USE surface_mod, &
[2963]	148	ONLY: ind_pav_green, ind_veg_wall, ind_wat_win, surf_def_h, &
	149	surf_lsm_h, surf_usm_h
[2232]	150
[2696]	151
[1]	152	IMPLICIT NONE
	153
[3554]	154	CHARACTER (LEN=2) :: do2d_mode !< output mode of variable ('xy', 'xz', 'yz')
	155	CHARACTER (LEN=2) :: mode !< mode with which the routine is called ('xy', 'xz', 'yz')
	156	CHARACTER (LEN=4) :: grid !< string defining the vertical grid
[1320]	157
[3554]	158	INTEGER(iwp) :: av !< flag for (non-)average output
	159	INTEGER(iwp) :: ngp !< number of grid points of an output slice
	160	INTEGER(iwp) :: file_id !< id of output files
[2696]	161	INTEGER(iwp) :: flag_nr !< number of masking flag
[3554]	162	INTEGER(iwp) :: i !< loop index
	163	INTEGER(iwp) :: is !< slice index
	164	INTEGER(iwp) :: ivar !< variable index
	165	INTEGER(iwp) :: j !< loop index
	166	INTEGER(iwp) :: k !< loop index
	167	INTEGER(iwp) :: l !< loop index
	168	INTEGER(iwp) :: layer_xy !< vertical index of a xy slice in array 'local_pf'
	169	INTEGER(iwp) :: m !< loop index
	170	INTEGER(iwp) :: n !< loop index
	171	INTEGER(iwp) :: nis !< number of vertical slices to be written via parallel NetCDF output
	172	INTEGER(iwp) :: ns !< number of output slices
[1682]	173	INTEGER(iwp) :: nzb_do !< lower limit of the data field (usually nzb)
	174	INTEGER(iwp) :: nzt_do !< upper limit of the data field (usually nzt+1)
[3554]	175	INTEGER(iwp) :: s_ind !< index of slice types (xy=1, xz=2, yz=3)
[4444]	176	#if defined( __parallel )
	177	INTEGER(iwp) :: iis !< vertical index of a xy slice in array 'local_2d_sections'
[3554]	178	INTEGER(iwp) :: sender !< PE id of sending PE
	179	INTEGER(iwp) :: ind(4) !< index limits (lower/upper bounds) of array 'local_2d'
[4444]	180	#endif
[3554]	181
	182	LOGICAL :: found !< true if output variable was found
	183	LOGICAL :: resorted !< true if variable is resorted
	184	LOGICAL :: two_d !< true if variable is only two dimensional
	185
	186	REAL(wp) :: mean_r !< mean particle radius
	187	REAL(wp) :: s_r2 !< sum( particle-radius**2 )
	188	REAL(wp) :: s_r3 !< sum( particle-radius**3 )
[1320]	189
[3554]	190	REAL(wp), DIMENSION(:), ALLOCATABLE :: level_z !< z levels for output array
	191	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: local_2d !< local 2-dimensional array containing output values
	192	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: local_2d_l !< local 2-dimensional array containing output values
[2232]	193
[3554]	194	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: local_pf !< output array
	195	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: local_2d_sections !< local array containing values at all slices
	196	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: local_2d_sections_l !< local array containing values at all slices
[1359]	197
[1]	198	#if defined( __parallel )
[3554]	199	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: total_2d !< same as local_2d
[1]	200	#endif
[3554]	201	REAL(wp), DIMENSION(:,:,:), POINTER :: to_be_resorted !< points to array which shall be output
[1]	202
[3885]	203
[3987]	204	IF ( debug_output_timestep ) CALL debug_message( 'data_output_2d', 'start' )
[1]	205	!
	206	!-- Immediate return, if no output is requested (no respective sections
	207	!-- found in parameter data_output)
	208	IF ( mode == 'xy' .AND. .NOT. data_output_xy(av) ) RETURN
	209	IF ( mode == 'xz' .AND. .NOT. data_output_xz(av) ) RETURN
	210	IF ( mode == 'yz' .AND. .NOT. data_output_yz(av) ) RETURN
	211
[1308]	212	CALL cpu_log (log_point(3),'data_output_2d','start')
	213
[1]	214	two_d = .FALSE. ! local variable to distinguish between output of pure 2D
	215	! arrays and cross-sections of 3D arrays.
	216
	217	!
	218	!-- Depending on the orientation of the cross-section, the respective output
	219	!-- files have to be opened.
	220	SELECT CASE ( mode )
	221
	222	CASE ( 'xy' )
[1960]	223	s_ind = 1
[2512]	224	ALLOCATE( level_z(nzb:nzt+1), local_2d(nxl:nxr,nys:nyn) )
[1]	225
[1308]	226	IF ( netcdf_data_format > 4 ) THEN
	227	ns = 1
[1960]	228	DO WHILE ( section(ns,s_ind) /= -9999 .AND. ns <= 100 )
[1308]	229	ns = ns + 1
	230	ENDDO
	231	ns = ns - 1
[2512]	232	ALLOCATE( local_2d_sections(nxl:nxr,nys:nyn,1:ns) )
[1353]	233	local_2d_sections = 0.0_wp
[1308]	234	ENDIF
	235
[493]	236	!
[1031]	237	!-- Parallel netCDF4/HDF5 output is done on all PEs, all other on PE0 only
[1327]	238	IF ( myid == 0 .OR. netcdf_data_format > 4 ) THEN
[493]	239	CALL check_open( 101+av*10 )
	240	ENDIF
[3052]	241	IF ( data_output_2d_on_each_pe .AND. netcdf_data_format < 5 ) THEN
[1]	242	CALL check_open( 21 )
	243	ELSE
	244	IF ( myid == 0 ) THEN
	245	#if defined( __parallel )
[2512]	246	ALLOCATE( total_2d(0:nx,0:ny) )
[1]	247	#endif
	248	ENDIF
	249	ENDIF
	250
	251	CASE ( 'xz' )
[1960]	252	s_ind = 2
[2512]	253	ALLOCATE( local_2d(nxl:nxr,nzb:nzt+1) )
[1]	254
[1308]	255	IF ( netcdf_data_format > 4 ) THEN
	256	ns = 1
[1960]	257	DO WHILE ( section(ns,s_ind) /= -9999 .AND. ns <= 100 )
[1308]	258	ns = ns + 1
	259	ENDDO
	260	ns = ns - 1
[2512]	261	ALLOCATE( local_2d_sections(nxl:nxr,1:ns,nzb:nzt+1) )
	262	ALLOCATE( local_2d_sections_l(nxl:nxr,1:ns,nzb:nzt+1) )
[1353]	263	local_2d_sections = 0.0_wp; local_2d_sections_l = 0.0_wp
[1308]	264	ENDIF
	265
[493]	266	!
[1031]	267	!-- Parallel netCDF4/HDF5 output is done on all PEs, all other on PE0 only
[1327]	268	IF ( myid == 0 .OR. netcdf_data_format > 4 ) THEN
[493]	269	CALL check_open( 102+av*10 )
	270	ENDIF
[1]	271
[3052]	272	IF ( data_output_2d_on_each_pe .AND. netcdf_data_format < 5 ) THEN
[1]	273	CALL check_open( 22 )
	274	ELSE
	275	IF ( myid == 0 ) THEN
	276	#if defined( __parallel )
[2512]	277	ALLOCATE( total_2d(0:nx,nzb:nzt+1) )
[1]	278	#endif
	279	ENDIF
	280	ENDIF
	281
	282	CASE ( 'yz' )
[1960]	283	s_ind = 3
[2512]	284	ALLOCATE( local_2d(nys:nyn,nzb:nzt+1) )
[1]	285
[1308]	286	IF ( netcdf_data_format > 4 ) THEN
	287	ns = 1
[1960]	288	DO WHILE ( section(ns,s_ind) /= -9999 .AND. ns <= 100 )
[1308]	289	ns = ns + 1
	290	ENDDO
	291	ns = ns - 1
[2512]	292	ALLOCATE( local_2d_sections(1:ns,nys:nyn,nzb:nzt+1) )
	293	ALLOCATE( local_2d_sections_l(1:ns,nys:nyn,nzb:nzt+1) )
[1353]	294	local_2d_sections = 0.0_wp; local_2d_sections_l = 0.0_wp
[1308]	295	ENDIF
	296
[493]	297	!
[1031]	298	!-- Parallel netCDF4/HDF5 output is done on all PEs, all other on PE0 only
[1327]	299	IF ( myid == 0 .OR. netcdf_data_format > 4 ) THEN
[493]	300	CALL check_open( 103+av*10 )
	301	ENDIF
[1]	302
[3052]	303	IF ( data_output_2d_on_each_pe .AND. netcdf_data_format < 5 ) THEN
[1]	304	CALL check_open( 23 )
	305	ELSE
	306	IF ( myid == 0 ) THEN
	307	#if defined( __parallel )
[2512]	308	ALLOCATE( total_2d(0:ny,nzb:nzt+1) )
[1]	309	#endif
	310	ENDIF
	311	ENDIF
	312
	313	CASE DEFAULT
[254]	314	message_string = 'unknown cross-section: ' // TRIM( mode )
	315	CALL message( 'data_output_2d', 'PA0180', 1, 2, 0, 6, 0 )
[1]	316
	317	END SELECT
	318
	319	!
[1745]	320	!-- For parallel netcdf output the time axis must be limited. Return, if this
	321	!-- limit is exceeded. This could be the case, if the simulated time exceeds
	322	!-- the given end time by the length of the given output interval.
	323	IF ( netcdf_data_format > 4 ) THEN
	324	IF ( mode == 'xy' .AND. do2d_xy_time_count(av) + 1 > &
	325	ntdim_2d_xy(av) ) THEN
	326	WRITE ( message_string, * ) 'Output of xy cross-sections is not ', &
[3646]	327	'given at t=', time_since_reference_point, 's because the', &
[1745]	328	' maximum number of output time levels is exceeded.'
	329	CALL message( 'data_output_2d', 'PA0384', 0, 1, 0, 6, 0 )
	330	CALL cpu_log( log_point(3), 'data_output_2d', 'stop' )
	331	RETURN
	332	ENDIF
	333	IF ( mode == 'xz' .AND. do2d_xz_time_count(av) + 1 > &
	334	ntdim_2d_xz(av) ) THEN
	335	WRITE ( message_string, * ) 'Output of xz cross-sections is not ', &
[3646]	336	'given at t=', time_since_reference_point, 's because the', &
[1745]	337	' maximum number of output time levels is exceeded.'
	338	CALL message( 'data_output_2d', 'PA0385', 0, 1, 0, 6, 0 )
	339	CALL cpu_log( log_point(3), 'data_output_2d', 'stop' )
	340	RETURN
	341	ENDIF
	342	IF ( mode == 'yz' .AND. do2d_yz_time_count(av) + 1 > &
	343	ntdim_2d_yz(av) ) THEN
	344	WRITE ( message_string, * ) 'Output of yz cross-sections is not ', &
[3646]	345	'given at t=', time_since_reference_point, 's because the', &
[1745]	346	' maximum number of output time levels is exceeded.'
	347	CALL message( 'data_output_2d', 'PA0386', 0, 1, 0, 6, 0 )
	348	CALL cpu_log( log_point(3), 'data_output_2d', 'stop' )
	349	RETURN
	350	ENDIF
	351	ENDIF
	352
	353	!
[1]	354	!-- Allocate a temporary array for resorting (kji -> ijk).
[2512]	355	ALLOCATE( local_pf(nxl:nxr,nys:nyn,nzb:nzt+1) )
[2232]	356	local_pf = 0.0
[1]	357
	358	!
	359	!-- Loop of all variables to be written.
	360	!-- Output dimensions chosen
[3554]	361	ivar = 1
	362	l = MAX( 2, LEN_TRIM( do2d(av,ivar) ) )
	363	do2d_mode = do2d(av,ivar)(l-1:l)
[1]	364
[3554]	365	DO WHILE ( do2d(av,ivar)(1:1) /= ' ' )
[1]	366
	367	IF ( do2d_mode == mode ) THEN
[1980]	368	!
	369	!-- Set flag to steer output of radiation, land-surface, or user-defined
	370	!-- quantities
	371	found = .FALSE.
[1551]	372
	373	nzb_do = nzb
	374	nzt_do = nzt+1
[1]	375	!
[2696]	376	!-- Before each output, set array local_pf to fill value
	377	local_pf = fill_value
	378	!
	379	!-- Set masking flag for topography for not resorted arrays
	380	flag_nr = 0
	381
	382	!
[1]	383	!-- Store the array chosen on the temporary array.
	384	resorted = .FALSE.
[3554]	385	SELECT CASE ( TRIM( do2d(av,ivar) ) )
[1]	386	CASE ( 'e_xy', 'e_xz', 'e_yz' )
	387	IF ( av == 0 ) THEN
	388	to_be_resorted => e
	389	ELSE
[3004]	390	IF ( .NOT. ALLOCATED( e_av ) ) THEN
	391	ALLOCATE( e_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	392	e_av = REAL( fill_value, KIND = wp )
	393	ENDIF
[1]	394	to_be_resorted => e_av
	395	ENDIF
	396	IF ( mode == 'xy' ) level_z = zu
	397
[3421]	398	CASE ( 'thetal_xy', 'thetal_xz', 'thetal_yz' )
[771]	399	IF ( av == 0 ) THEN
	400	to_be_resorted => pt
	401	ELSE
[3004]	402	IF ( .NOT. ALLOCATED( lpt_av ) ) THEN
	403	ALLOCATE( lpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	404	lpt_av = REAL( fill_value, KIND = wp )
	405	ENDIF
[771]	406	to_be_resorted => lpt_av
	407	ENDIF
	408	IF ( mode == 'xy' ) level_z = zu
	409
[1]	410	CASE ( 'lwp*_xy' ) ! 2d-array
	411	IF ( av == 0 ) THEN
[2512]	412	DO i = nxl, nxr
	413	DO j = nys, nyn
[1320]	414	local_pf(i,j,nzb+1) = SUM( ql(nzb:nzt,j,i) * &
[1]	415	dzw(1:nzt+1) )
	416	ENDDO
	417	ENDDO
	418	ELSE
[3004]	419	IF ( .NOT. ALLOCATED( lwp_av ) ) THEN
	420	ALLOCATE( lwp_av(nysg:nyng,nxlg:nxrg) )
	421	lwp_av = REAL( fill_value, KIND = wp )
	422	ENDIF
[2512]	423	DO i = nxl, nxr
	424	DO j = nys, nyn
[1]	425	local_pf(i,j,nzb+1) = lwp_av(j,i)
	426	ENDDO
	427	ENDDO
	428	ENDIF
	429	resorted = .TRUE.
	430	two_d = .TRUE.
	431	level_z(nzb+1) = zu(nzb+1)
	432
[2797]	433	CASE ( 'ghf*_xy' ) ! 2d-array
	434	IF ( av == 0 ) THEN
	435	DO m = 1, surf_lsm_h%ns
	436	i = surf_lsm_h%i(m)
	437	j = surf_lsm_h%j(m)
	438	local_pf(i,j,nzb+1) = surf_lsm_h%ghf(m)
	439	ENDDO
	440	DO m = 1, surf_usm_h%ns
	441	i = surf_usm_h%i(m)
	442	j = surf_usm_h%j(m)
[4441]	443	local_pf(i,j,nzb+1) = surf_usm_h%frac(m,ind_veg_wall) * &
[2797]	444	surf_usm_h%wghf_eb(m) + &
[4441]	445	surf_usm_h%frac(m,ind_pav_green) * &
[2797]	446	surf_usm_h%wghf_eb_green(m) + &
[4441]	447	surf_usm_h%frac(m,ind_wat_win) * &
[2797]	448	surf_usm_h%wghf_eb_window(m)
	449	ENDDO
	450	ELSE
[3004]	451	IF ( .NOT. ALLOCATED( ghf_av ) ) THEN
	452	ALLOCATE( ghf_av(nysg:nyng,nxlg:nxrg) )
	453	ghf_av = REAL( fill_value, KIND = wp )
	454	ENDIF
[2797]	455	DO i = nxl, nxr
	456	DO j = nys, nyn
	457	local_pf(i,j,nzb+1) = ghf_av(j,i)
	458	ENDDO
	459	ENDDO
	460	ENDIF
	461
	462	resorted = .TRUE.
	463	two_d = .TRUE.
	464	level_z(nzb+1) = zu(nzb+1)
	465
[1691]	466	CASE ( 'ol*_xy' ) ! 2d-array
	467	IF ( av == 0 ) THEN
[2232]	468	DO m = 1, surf_def_h(0)%ns
	469	i = surf_def_h(0)%i(m)
	470	j = surf_def_h(0)%j(m)
[2512]	471	local_pf(i,j,nzb+1) = surf_def_h(0)%ol(m)
[2232]	472	ENDDO
	473	DO m = 1, surf_lsm_h%ns
	474	i = surf_lsm_h%i(m)
	475	j = surf_lsm_h%j(m)
[2512]	476	local_pf(i,j,nzb+1) = surf_lsm_h%ol(m)
[2232]	477	ENDDO
	478	DO m = 1, surf_usm_h%ns
	479	i = surf_usm_h%i(m)
	480	j = surf_usm_h%j(m)
[2512]	481	local_pf(i,j,nzb+1) = surf_usm_h%ol(m)
[2232]	482	ENDDO
[1691]	483	ELSE
[3004]	484	IF ( .NOT. ALLOCATED( ol_av ) ) THEN
	485	ALLOCATE( ol_av(nysg:nyng,nxlg:nxrg) )
	486	ol_av = REAL( fill_value, KIND = wp )
	487	ENDIF
[2512]	488	DO i = nxl, nxr
	489	DO j = nys, nyn
[1691]	490	local_pf(i,j,nzb+1) = ol_av(j,i)
	491	ENDDO
	492	ENDDO
	493	ENDIF
	494	resorted = .TRUE.
	495	two_d = .TRUE.
	496	level_z(nzb+1) = zu(nzb+1)
	497
[1]	498	CASE ( 'p_xy', 'p_xz', 'p_yz' )
	499	IF ( av == 0 ) THEN
[729]	500	IF ( psolver /= 'sor' ) CALL exchange_horiz( p, nbgp )
[1]	501	to_be_resorted => p
	502	ELSE
[3004]	503	IF ( .NOT. ALLOCATED( p_av ) ) THEN
	504	ALLOCATE( p_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	505	p_av = REAL( fill_value, KIND = wp )
	506	ENDIF
[729]	507	IF ( psolver /= 'sor' ) CALL exchange_horiz( p_av, nbgp )
[1]	508	to_be_resorted => p_av
	509	ENDIF
	510	IF ( mode == 'xy' ) level_z = zu
	511
	512	CASE ( 'pc_xy', 'pc_xz', 'pc_yz' ) ! particle concentration
	513	IF ( av == 0 ) THEN
[3646]	514	IF ( time_since_reference_point >= particle_advection_start ) THEN
[215]	515	tend = prt_count
[2512]	516	! CALL exchange_horiz( tend, nbgp )
[215]	517	ELSE
[1353]	518	tend = 0.0_wp
[215]	519	ENDIF
[2512]	520	DO i = nxl, nxr
	521	DO j = nys, nyn
[1]	522	DO k = nzb, nzt+1
	523	local_pf(i,j,k) = tend(k,j,i)
	524	ENDDO
	525	ENDDO
	526	ENDDO
	527	resorted = .TRUE.
	528	ELSE
[3004]	529	IF ( .NOT. ALLOCATED( pc_av ) ) THEN
	530	ALLOCATE( pc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	531	pc_av = REAL( fill_value, KIND = wp )
	532	ENDIF
[2512]	533	! CALL exchange_horiz( pc_av, nbgp )
[1]	534	to_be_resorted => pc_av
	535	ENDIF
	536
[1359]	537	CASE ( 'pr_xy', 'pr_xz', 'pr_yz' ) ! mean particle radius (effective radius)
[1]	538	IF ( av == 0 ) THEN
[3646]	539	IF ( time_since_reference_point >= particle_advection_start ) THEN
[215]	540	DO i = nxl, nxr
	541	DO j = nys, nyn
	542	DO k = nzb, nzt+1
[1359]	543	number_of_particles = prt_count(k,j,i)
	544	IF (number_of_particles <= 0) CYCLE
	545	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
	546	s_r2 = 0.0_wp
[1353]	547	s_r3 = 0.0_wp
[1359]	548	DO n = 1, number_of_particles
	549	IF ( particles(n)%particle_mask ) THEN
	550	s_r2 = s_r2 + particles(n)%radius*2 &
	551	particles(n)%weight_factor
	552	s_r3 = s_r3 + particles(n)%radius*3 &
	553	particles(n)%weight_factor
	554	ENDIF
[215]	555	ENDDO
[1359]	556	IF ( s_r2 > 0.0_wp ) THEN
	557	mean_r = s_r3 / s_r2
[215]	558	ELSE
[1353]	559	mean_r = 0.0_wp
[215]	560	ENDIF
	561	tend(k,j,i) = mean_r
[1]	562	ENDDO
	563	ENDDO
	564	ENDDO
[2512]	565	! CALL exchange_horiz( tend, nbgp )
[215]	566	ELSE
[1353]	567	tend = 0.0_wp
[1359]	568	ENDIF
[2512]	569	DO i = nxl, nxr
	570	DO j = nys, nyn
[1]	571	DO k = nzb, nzt+1
	572	local_pf(i,j,k) = tend(k,j,i)
	573	ENDDO
	574	ENDDO
	575	ENDDO
	576	resorted = .TRUE.
	577	ELSE
[3004]	578	IF ( .NOT. ALLOCATED( pr_av ) ) THEN
	579	ALLOCATE( pr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	580	pr_av = REAL( fill_value, KIND = wp )
	581	ENDIF
[2512]	582	! CALL exchange_horiz( pr_av, nbgp )
[1]	583	to_be_resorted => pr_av
	584	ENDIF
	585
[3421]	586	CASE ( 'theta_xy', 'theta_xz', 'theta_yz' )
[1]	587	IF ( av == 0 ) THEN
[3274]	588	IF ( .NOT. bulk_cloud_model ) THEN
[1]	589	to_be_resorted => pt
	590	ELSE
[2512]	591	DO i = nxl, nxr
	592	DO j = nys, nyn
[1]	593	DO k = nzb, nzt+1
[3274]	594	local_pf(i,j,k) = pt(k,j,i) + lv_d_cp * &
	595	d_exner(k) * &
[1]	596	ql(k,j,i)
	597	ENDDO
	598	ENDDO
	599	ENDDO
	600	resorted = .TRUE.
	601	ENDIF
	602	ELSE
[3004]	603	IF ( .NOT. ALLOCATED( pt_av ) ) THEN
	604	ALLOCATE( pt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	605	pt_av = REAL( fill_value, KIND = wp )
	606	ENDIF
[1]	607	to_be_resorted => pt_av
	608	ENDIF
	609	IF ( mode == 'xy' ) level_z = zu
	610
	611	CASE ( 'q_xy', 'q_xz', 'q_yz' )
	612	IF ( av == 0 ) THEN
	613	to_be_resorted => q
	614	ELSE
[3004]	615	IF ( .NOT. ALLOCATED( q_av ) ) THEN
	616	ALLOCATE( q_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	617	q_av = REAL( fill_value, KIND = wp )
	618	ENDIF
[1]	619	to_be_resorted => q_av
	620	ENDIF
	621	IF ( mode == 'xy' ) level_z = zu
	622
[1053]	623	CASE ( 'ql_xy', 'ql_xz', 'ql_yz' )
	624	IF ( av == 0 ) THEN
[1115]	625	to_be_resorted => ql
[1053]	626	ELSE
[3004]	627	IF ( .NOT. ALLOCATED( ql_av ) ) THEN
	628	ALLOCATE( ql_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	629	ql_av = REAL( fill_value, KIND = wp )
	630	ENDIF
[1115]	631	to_be_resorted => ql_av
[1053]	632	ENDIF
	633	IF ( mode == 'xy' ) level_z = zu
	634
[1]	635	CASE ( 'ql_c_xy', 'ql_c_xz', 'ql_c_yz' )
	636	IF ( av == 0 ) THEN
	637	to_be_resorted => ql_c
	638	ELSE
[3004]	639	IF ( .NOT. ALLOCATED( ql_c_av ) ) THEN
	640	ALLOCATE( ql_c_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	641	ql_c_av = REAL( fill_value, KIND = wp )
	642	ENDIF
[1]	643	to_be_resorted => ql_c_av
	644	ENDIF
	645	IF ( mode == 'xy' ) level_z = zu
	646
	647	CASE ( 'ql_v_xy', 'ql_v_xz', 'ql_v_yz' )
	648	IF ( av == 0 ) THEN
	649	to_be_resorted => ql_v
	650	ELSE
[3004]	651	IF ( .NOT. ALLOCATED( ql_v_av ) ) THEN
	652	ALLOCATE( ql_v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	653	ql_v_av = REAL( fill_value, KIND = wp )
	654	ENDIF
[1]	655	to_be_resorted => ql_v_av
	656	ENDIF
	657	IF ( mode == 'xy' ) level_z = zu
	658
	659	CASE ( 'ql_vp_xy', 'ql_vp_xz', 'ql_vp_yz' )
	660	IF ( av == 0 ) THEN
[3646]	661	IF ( time_since_reference_point >= particle_advection_start ) THEN
[1007]	662	DO i = nxl, nxr
	663	DO j = nys, nyn
	664	DO k = nzb, nzt+1
[1359]	665	number_of_particles = prt_count(k,j,i)
	666	IF (number_of_particles <= 0) CYCLE
	667	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
	668	DO n = 1, number_of_particles
	669	IF ( particles(n)%particle_mask ) THEN
	670	tend(k,j,i) = tend(k,j,i) + &
	671	particles(n)%weight_factor / &
	672	prt_count(k,j,i)
	673	ENDIF
[1007]	674	ENDDO
	675	ENDDO
	676	ENDDO
	677	ENDDO
[2512]	678	! CALL exchange_horiz( tend, nbgp )
[1007]	679	ELSE
[1353]	680	tend = 0.0_wp
[1359]	681	ENDIF
[2512]	682	DO i = nxl, nxr
	683	DO j = nys, nyn
[1007]	684	DO k = nzb, nzt+1
	685	local_pf(i,j,k) = tend(k,j,i)
	686	ENDDO
	687	ENDDO
	688	ENDDO
	689	resorted = .TRUE.
	690	ELSE
[3004]	691	IF ( .NOT. ALLOCATED( ql_vp_av ) ) THEN
	692	ALLOCATE( ql_vp_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	693	ql_vp_av = REAL( fill_value, KIND = wp )
	694	ENDIF
[2512]	695	! CALL exchange_horiz( ql_vp_av, nbgp )
[3004]	696	to_be_resorted => ql_vp_av
[1]	697	ENDIF
	698	IF ( mode == 'xy' ) level_z = zu
	699
[354]	700	CASE ( 'qsws*_xy' ) ! 2d-array
	701	IF ( av == 0 ) THEN
[3176]	702	local_pf(:,:,nzb+1) = REAL( fill_value, KIND = wp )
[2743]	703	!
	704	!-- In case of default surfaces, clean-up flux by density.
[3176]	705	!-- In case of land-surfaces, convert fluxes into
[2743]	706	!-- dynamic units
[2232]	707	DO m = 1, surf_def_h(0)%ns
	708	i = surf_def_h(0)%i(m)
	709	j = surf_def_h(0)%j(m)
[2743]	710	k = surf_def_h(0)%k(m)
	711	local_pf(i,j,nzb+1) = surf_def_h(0)%qsws(m) * &
	712	waterflux_output_conversion(k)
[2232]	713	ENDDO
	714	DO m = 1, surf_lsm_h%ns
	715	i = surf_lsm_h%i(m)
	716	j = surf_lsm_h%j(m)
[2743]	717	k = surf_lsm_h%k(m)
	718	local_pf(i,j,nzb+1) = surf_lsm_h%qsws(m) * l_v
[2232]	719	ENDDO
[3943]	720	DO m = 1, surf_usm_h%ns
	721	i = surf_usm_h%i(m)
	722	j = surf_usm_h%j(m)
	723	k = surf_usm_h%k(m)
	724	local_pf(i,j,nzb+1) = surf_usm_h%qsws(m) * l_v
	725	ENDDO
[354]	726	ELSE
[3004]	727	IF ( .NOT. ALLOCATED( qsws_av ) ) THEN
	728	ALLOCATE( qsws_av(nysg:nyng,nxlg:nxrg) )
	729	qsws_av = REAL( fill_value, KIND = wp )
	730	ENDIF
[2512]	731	DO i = nxl, nxr
	732	DO j = nys, nyn
[354]	733	local_pf(i,j,nzb+1) = qsws_av(j,i)
	734	ENDDO
	735	ENDDO
	736	ENDIF
	737	resorted = .TRUE.
	738	two_d = .TRUE.
	739	level_z(nzb+1) = zu(nzb+1)
	740
[1]	741	CASE ( 'qv_xy', 'qv_xz', 'qv_yz' )
	742	IF ( av == 0 ) THEN
[2512]	743	DO i = nxl, nxr
	744	DO j = nys, nyn
[1]	745	DO k = nzb, nzt+1
	746	local_pf(i,j,k) = q(k,j,i) - ql(k,j,i)
	747	ENDDO
	748	ENDDO
	749	ENDDO
	750	resorted = .TRUE.
	751	ELSE
[3004]	752	IF ( .NOT. ALLOCATED( qv_av ) ) THEN
	753	ALLOCATE( qv_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	754	qv_av = REAL( fill_value, KIND = wp )
	755	ENDIF
[1]	756	to_be_resorted => qv_av
	757	ENDIF
	758	IF ( mode == 'xy' ) level_z = zu
	759
[2735]	760	CASE ( 'r_a*_xy' ) ! 2d-array
	761	IF ( av == 0 ) THEN
	762	DO m = 1, surf_lsm_h%ns
	763	i = surf_lsm_h%i(m)
	764	j = surf_lsm_h%j(m)
	765	local_pf(i,j,nzb+1) = surf_lsm_h%r_a(m)
	766	ENDDO
[1551]	767
[2735]	768	DO m = 1, surf_usm_h%ns
	769	i = surf_usm_h%i(m)
	770	j = surf_usm_h%j(m)
	771	local_pf(i,j,nzb+1) = &
[4441]	772	( surf_usm_h%frac(m,ind_veg_wall) * &
[2963]	773	surf_usm_h%r_a(m) + &
[4441]	774	surf_usm_h%frac(m,ind_pav_green) * &
[2963]	775	surf_usm_h%r_a_green(m) + &
[4441]	776	surf_usm_h%frac(m,ind_wat_win) * &
[2963]	777	surf_usm_h%r_a_window(m) )
[2735]	778	ENDDO
	779	ELSE
[3004]	780	IF ( .NOT. ALLOCATED( r_a_av ) ) THEN
	781	ALLOCATE( r_a_av(nysg:nyng,nxlg:nxrg) )
	782	r_a_av = REAL( fill_value, KIND = wp )
	783	ENDIF
[2735]	784	DO i = nxl, nxr
	785	DO j = nys, nyn
	786	local_pf(i,j,nzb+1) = r_a_av(j,i)
	787	ENDDO
	788	ENDDO
	789	ENDIF
	790	resorted = .TRUE.
	791	two_d = .TRUE.
	792	level_z(nzb+1) = zu(nzb+1)
	793
[1]	794	CASE ( 's_xy', 's_xz', 's_yz' )
	795	IF ( av == 0 ) THEN
[1960]	796	to_be_resorted => s
[1]	797	ELSE
[3004]	798	IF ( .NOT. ALLOCATED( s_av ) ) THEN
	799	ALLOCATE( s_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	800	s_av = REAL( fill_value, KIND = wp )
	801	ENDIF
[355]	802	to_be_resorted => s_av
[1]	803	ENDIF
	804
[354]	805	CASE ( 'shf*_xy' ) ! 2d-array
	806	IF ( av == 0 ) THEN
[2743]	807	!
	808	!-- In case of default surfaces, clean-up flux by density.
	809	!-- In case of land- and urban-surfaces, convert fluxes into
	810	!-- dynamic units.
[2232]	811	DO m = 1, surf_def_h(0)%ns
	812	i = surf_def_h(0)%i(m)
	813	j = surf_def_h(0)%j(m)
[2743]	814	k = surf_def_h(0)%k(m)
	815	local_pf(i,j,nzb+1) = surf_def_h(0)%shf(m) * &
	816	heatflux_output_conversion(k)
[2232]	817	ENDDO
	818	DO m = 1, surf_lsm_h%ns
	819	i = surf_lsm_h%i(m)
	820	j = surf_lsm_h%j(m)
[2743]	821	k = surf_lsm_h%k(m)
[3274]	822	local_pf(i,j,nzb+1) = surf_lsm_h%shf(m) * c_p
[2232]	823	ENDDO
	824	DO m = 1, surf_usm_h%ns
	825	i = surf_usm_h%i(m)
	826	j = surf_usm_h%j(m)
[2743]	827	k = surf_usm_h%k(m)
[3274]	828	local_pf(i,j,nzb+1) = surf_usm_h%shf(m) * c_p
[2232]	829	ENDDO
[354]	830	ELSE
[3004]	831	IF ( .NOT. ALLOCATED( shf_av ) ) THEN
	832	ALLOCATE( shf_av(nysg:nyng,nxlg:nxrg) )
	833	shf_av = REAL( fill_value, KIND = wp )
	834	ENDIF
[2512]	835	DO i = nxl, nxr
	836	DO j = nys, nyn
[354]	837	local_pf(i,j,nzb+1) = shf_av(j,i)
	838	ENDDO
	839	ENDDO
	840	ENDIF
	841	resorted = .TRUE.
	842	two_d = .TRUE.
	843	level_z(nzb+1) = zu(nzb+1)
[1960]	844
	845	CASE ( 'ssws*_xy' ) ! 2d-array
	846	IF ( av == 0 ) THEN
[2232]	847	DO m = 1, surf_def_h(0)%ns
	848	i = surf_def_h(0)%i(m)
	849	j = surf_def_h(0)%j(m)
[2512]	850	local_pf(i,j,nzb+1) = surf_def_h(0)%ssws(m)
[2232]	851	ENDDO
	852	DO m = 1, surf_lsm_h%ns
	853	i = surf_lsm_h%i(m)
	854	j = surf_lsm_h%j(m)
[2512]	855	local_pf(i,j,nzb+1) = surf_lsm_h%ssws(m)
[2232]	856	ENDDO
	857	DO m = 1, surf_usm_h%ns
	858	i = surf_usm_h%i(m)
	859	j = surf_usm_h%j(m)
[2512]	860	local_pf(i,j,nzb+1) = surf_usm_h%ssws(m)
[2232]	861	ENDDO
[1960]	862	ELSE
[3004]	863	IF ( .NOT. ALLOCATED( ssws_av ) ) THEN
	864	ALLOCATE( ssws_av(nysg:nyng,nxlg:nxrg) )
	865	ssws_av = REAL( fill_value, KIND = wp )
	866	ENDIF
[2512]	867	DO i = nxl, nxr
	868	DO j = nys, nyn
[1960]	869	local_pf(i,j,nzb+1) = ssws_av(j,i)
	870	ENDDO
	871	ENDDO
	872	ENDIF
	873	resorted = .TRUE.
	874	two_d = .TRUE.
	875	level_z(nzb+1) = zu(nzb+1)
[1551]	876
[1]	877	CASE ( 't*_xy' ) ! 2d-array
	878	IF ( av == 0 ) THEN
[2232]	879	DO m = 1, surf_def_h(0)%ns
	880	i = surf_def_h(0)%i(m)
	881	j = surf_def_h(0)%j(m)
[2512]	882	local_pf(i,j,nzb+1) = surf_def_h(0)%ts(m)
[2232]	883	ENDDO
	884	DO m = 1, surf_lsm_h%ns
	885	i = surf_lsm_h%i(m)
	886	j = surf_lsm_h%j(m)
[2512]	887	local_pf(i,j,nzb+1) = surf_lsm_h%ts(m)
[2232]	888	ENDDO
	889	DO m = 1, surf_usm_h%ns
	890	i = surf_usm_h%i(m)
	891	j = surf_usm_h%j(m)
[2512]	892	local_pf(i,j,nzb+1) = surf_usm_h%ts(m)
[2232]	893	ENDDO
[1]	894	ELSE
[3004]	895	IF ( .NOT. ALLOCATED( ts_av ) ) THEN
	896	ALLOCATE( ts_av(nysg:nyng,nxlg:nxrg) )
	897	ts_av = REAL( fill_value, KIND = wp )
	898	ENDIF
[2512]	899	DO i = nxl, nxr
	900	DO j = nys, nyn
[1]	901	local_pf(i,j,nzb+1) = ts_av(j,i)
	902	ENDDO
	903	ENDDO
	904	ENDIF
	905	resorted = .TRUE.
	906	two_d = .TRUE.
	907	level_z(nzb+1) = zu(nzb+1)
	908
[2742]	909	CASE ( 'tsurf*_xy' ) ! 2d-array
	910	IF ( av == 0 ) THEN
[2798]	911	DO m = 1, surf_def_h(0)%ns
	912	i = surf_def_h(0)%i(m)
	913	j = surf_def_h(0)%j(m)
	914	local_pf(i,j,nzb+1) = surf_def_h(0)%pt_surface(m)
	915	ENDDO
	916
[2742]	917	DO m = 1, surf_lsm_h%ns
	918	i = surf_lsm_h%i(m)
	919	j = surf_lsm_h%j(m)
	920	local_pf(i,j,nzb+1) = surf_lsm_h%pt_surface(m)
	921	ENDDO
	922
	923	DO m = 1, surf_usm_h%ns
	924	i = surf_usm_h%i(m)
	925	j = surf_usm_h%j(m)
	926	local_pf(i,j,nzb+1) = surf_usm_h%pt_surface(m)
	927	ENDDO
	928
	929	ELSE
[3004]	930	IF ( .NOT. ALLOCATED( tsurf_av ) ) THEN
	931	ALLOCATE( tsurf_av(nysg:nyng,nxlg:nxrg) )
	932	tsurf_av = REAL( fill_value, KIND = wp )
	933	ENDIF
[2742]	934	DO i = nxl, nxr
	935	DO j = nys, nyn
	936	local_pf(i,j,nzb+1) = tsurf_av(j,i)
	937	ENDDO
	938	ENDDO
	939	ENDIF
	940	resorted = .TRUE.
	941	two_d = .TRUE.
	942	level_z(nzb+1) = zu(nzb+1)
	943
[1]	944	CASE ( 'u_xy', 'u_xz', 'u_yz' )
[2696]	945	flag_nr = 1
[1]	946	IF ( av == 0 ) THEN
	947	to_be_resorted => u
	948	ELSE
[3004]	949	IF ( .NOT. ALLOCATED( u_av ) ) THEN
	950	ALLOCATE( u_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	951	u_av = REAL( fill_value, KIND = wp )
	952	ENDIF
[1]	953	to_be_resorted => u_av
	954	ENDIF
	955	IF ( mode == 'xy' ) level_z = zu
	956	!
	957	!-- Substitute the values generated by "mirror" boundary condition
	958	!-- at the bottom boundary by the real surface values.
[3554]	959	IF ( do2d(av,ivar) == 'u_xz' .OR. do2d(av,ivar) == 'u_yz' ) THEN
[1353]	960	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0_wp
[1]	961	ENDIF
[4039]	962
[3421]	963	CASE ( 'us*_xy' ) ! 2d-array
[1]	964	IF ( av == 0 ) THEN
[2232]	965	DO m = 1, surf_def_h(0)%ns
	966	i = surf_def_h(0)%i(m)
	967	j = surf_def_h(0)%j(m)
[2512]	968	local_pf(i,j,nzb+1) = surf_def_h(0)%us(m)
[2232]	969	ENDDO
	970	DO m = 1, surf_lsm_h%ns
	971	i = surf_lsm_h%i(m)
	972	j = surf_lsm_h%j(m)
[2512]	973	local_pf(i,j,nzb+1) = surf_lsm_h%us(m)
[2232]	974	ENDDO
	975	DO m = 1, surf_usm_h%ns
	976	i = surf_usm_h%i(m)
	977	j = surf_usm_h%j(m)
[2512]	978	local_pf(i,j,nzb+1) = surf_usm_h%us(m)
[2232]	979	ENDDO
[1]	980	ELSE
[3004]	981	IF ( .NOT. ALLOCATED( us_av ) ) THEN
	982	ALLOCATE( us_av(nysg:nyng,nxlg:nxrg) )
	983	us_av = REAL( fill_value, KIND = wp )
	984	ENDIF
[2512]	985	DO i = nxl, nxr
	986	DO j = nys, nyn
[1]	987	local_pf(i,j,nzb+1) = us_av(j,i)
	988	ENDDO
	989	ENDDO
	990	ENDIF
	991	resorted = .TRUE.
	992	two_d = .TRUE.
	993	level_z(nzb+1) = zu(nzb+1)
	994
	995	CASE ( 'v_xy', 'v_xz', 'v_yz' )
[2696]	996	flag_nr = 2
[1]	997	IF ( av == 0 ) THEN
	998	to_be_resorted => v
	999	ELSE
[3004]	1000	IF ( .NOT. ALLOCATED( v_av ) ) THEN
	1001	ALLOCATE( v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	1002	v_av = REAL( fill_value, KIND = wp )
	1003	ENDIF
[1]	1004	to_be_resorted => v_av
	1005	ENDIF
	1006	IF ( mode == 'xy' ) level_z = zu
	1007	!
	1008	!-- Substitute the values generated by "mirror" boundary condition
	1009	!-- at the bottom boundary by the real surface values.
[3554]	1010	IF ( do2d(av,ivar) == 'v_xz' .OR. do2d(av,ivar) == 'v_yz' ) THEN
[1353]	1011	IF ( ibc_uv_b == 0 ) local_pf(:,:,nzb) = 0.0_wp
[1]	1012	ENDIF
	1013
[3421]	1014	CASE ( 'thetav_xy', 'thetav_xz', 'thetav_yz' )
[1]	1015	IF ( av == 0 ) THEN
	1016	to_be_resorted => vpt
	1017	ELSE
[3004]	1018	IF ( .NOT. ALLOCATED( vpt_av ) ) THEN
	1019	ALLOCATE( vpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	1020	vpt_av = REAL( fill_value, KIND = wp )
	1021	ENDIF
[1]	1022	to_be_resorted => vpt_av
	1023	ENDIF
	1024	IF ( mode == 'xy' ) level_z = zu
	1025
	1026	CASE ( 'w_xy', 'w_xz', 'w_yz' )
[2696]	1027	flag_nr = 3
[1]	1028	IF ( av == 0 ) THEN
	1029	to_be_resorted => w
	1030	ELSE
[3004]	1031	IF ( .NOT. ALLOCATED( w_av ) ) THEN
	1032	ALLOCATE( w_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	1033	w_av = REAL( fill_value, KIND = wp )
	1034	ENDIF
[1]	1035	to_be_resorted => w_av
	1036	ENDIF
	1037	IF ( mode == 'xy' ) level_z = zw
	1038
[72]	1039	CASE ( 'z0*_xy' ) ! 2d-array
	1040	IF ( av == 0 ) THEN
[2232]	1041	DO m = 1, surf_def_h(0)%ns
	1042	i = surf_def_h(0)%i(m)
	1043	j = surf_def_h(0)%j(m)
[2512]	1044	local_pf(i,j,nzb+1) = surf_def_h(0)%z0(m)
[2232]	1045	ENDDO
	1046	DO m = 1, surf_lsm_h%ns
	1047	i = surf_lsm_h%i(m)
	1048	j = surf_lsm_h%j(m)
[2512]	1049	local_pf(i,j,nzb+1) = surf_lsm_h%z0(m)
[2232]	1050	ENDDO
	1051	DO m = 1, surf_usm_h%ns
	1052	i = surf_usm_h%i(m)
	1053	j = surf_usm_h%j(m)
[2512]	1054	local_pf(i,j,nzb+1) = surf_usm_h%z0(m)
[2232]	1055	ENDDO
[72]	1056	ELSE
[3004]	1057	IF ( .NOT. ALLOCATED( z0_av ) ) THEN
	1058	ALLOCATE( z0_av(nysg:nyng,nxlg:nxrg) )
	1059	z0_av = REAL( fill_value, KIND = wp )
	1060	ENDIF
[2512]	1061	DO i = nxl, nxr
	1062	DO j = nys, nyn
[72]	1063	local_pf(i,j,nzb+1) = z0_av(j,i)
	1064	ENDDO
	1065	ENDDO
	1066	ENDIF
	1067	resorted = .TRUE.
	1068	two_d = .TRUE.
	1069	level_z(nzb+1) = zu(nzb+1)
	1070
[978]	1071	CASE ( 'z0h*_xy' ) ! 2d-array
	1072	IF ( av == 0 ) THEN
[2232]	1073	DO m = 1, surf_def_h(0)%ns
	1074	i = surf_def_h(0)%i(m)
	1075	j = surf_def_h(0)%j(m)
[2512]	1076	local_pf(i,j,nzb+1) = surf_def_h(0)%z0h(m)
[2232]	1077	ENDDO
	1078	DO m = 1, surf_lsm_h%ns
	1079	i = surf_lsm_h%i(m)
	1080	j = surf_lsm_h%j(m)
[2512]	1081	local_pf(i,j,nzb+1) = surf_lsm_h%z0h(m)
[2232]	1082	ENDDO
	1083	DO m = 1, surf_usm_h%ns
	1084	i = surf_usm_h%i(m)
	1085	j = surf_usm_h%j(m)
[2512]	1086	local_pf(i,j,nzb+1) = surf_usm_h%z0h(m)
[2232]	1087	ENDDO
[978]	1088	ELSE
[3004]	1089	IF ( .NOT. ALLOCATED( z0h_av ) ) THEN
	1090	ALLOCATE( z0h_av(nysg:nyng,nxlg:nxrg) )
	1091	z0h_av = REAL( fill_value, KIND = wp )
	1092	ENDIF
[2512]	1093	DO i = nxl, nxr
	1094	DO j = nys, nyn
[978]	1095	local_pf(i,j,nzb+1) = z0h_av(j,i)
	1096	ENDDO
	1097	ENDDO
	1098	ENDIF
	1099	resorted = .TRUE.
	1100	two_d = .TRUE.
	1101	level_z(nzb+1) = zu(nzb+1)
	1102
[1788]	1103	CASE ( 'z0q*_xy' ) ! 2d-array
	1104	IF ( av == 0 ) THEN
[2232]	1105	DO m = 1, surf_def_h(0)%ns
	1106	i = surf_def_h(0)%i(m)
	1107	j = surf_def_h(0)%j(m)
[2512]	1108	local_pf(i,j,nzb+1) = surf_def_h(0)%z0q(m)
[2232]	1109	ENDDO
	1110	DO m = 1, surf_lsm_h%ns
	1111	i = surf_lsm_h%i(m)
	1112	j = surf_lsm_h%j(m)
[2512]	1113	local_pf(i,j,nzb+1) = surf_lsm_h%z0q(m)
[2232]	1114	ENDDO
	1115	DO m = 1, surf_usm_h%ns
	1116	i = surf_usm_h%i(m)
	1117	j = surf_usm_h%j(m)
[2512]	1118	local_pf(i,j,nzb+1) = surf_usm_h%z0q(m)
[2232]	1119	ENDDO
[1788]	1120	ELSE
[3004]	1121	IF ( .NOT. ALLOCATED( z0q_av ) ) THEN
	1122	ALLOCATE( z0q_av(nysg:nyng,nxlg:nxrg) )
	1123	z0q_av = REAL( fill_value, KIND = wp )
	1124	ENDIF
[2512]	1125	DO i = nxl, nxr
	1126	DO j = nys, nyn
[1788]	1127	local_pf(i,j,nzb+1) = z0q_av(j,i)
	1128	ENDDO
	1129	ENDDO
	1130	ENDIF
	1131	resorted = .TRUE.
	1132	two_d = .TRUE.
	1133	level_z(nzb+1) = zu(nzb+1)
	1134
[1]	1135	CASE DEFAULT
[1972]	1136
[1]	1137	!
[3294]	1138	!-- Quantities of other modules
[1972]	1139	IF ( .NOT. found ) THEN
[3637]	1140	CALL module_interface_data_output_2d( &
	1141	av, do2d(av,ivar), found, grid, mode, &
	1142	local_pf, two_d, nzb_do, nzt_do, &
	1143	fill_value &
	1144	)
[1972]	1145	ENDIF
	1146
[1]	1147	resorted = .TRUE.
	1148
	1149	IF ( grid == 'zu' ) THEN
	1150	IF ( mode == 'xy' ) level_z = zu
	1151	ELSEIF ( grid == 'zw' ) THEN
	1152	IF ( mode == 'xy' ) level_z = zw
[343]	1153	ELSEIF ( grid == 'zu1' ) THEN
	1154	IF ( mode == 'xy' ) level_z(nzb+1) = zu(nzb+1)
[1551]	1155	ELSEIF ( grid == 'zs' ) THEN
	1156	IF ( mode == 'xy' ) level_z = zs
[1]	1157	ENDIF
	1158
	1159	IF ( .NOT. found ) THEN
[1320]	1160	message_string = 'no output provided for: ' // &
[3554]	1161	TRIM( do2d(av,ivar) )
[254]	1162	CALL message( 'data_output_2d', 'PA0181', 0, 0, 0, 6, 0 )
[1]	1163	ENDIF
	1164
	1165	END SELECT
	1166
	1167	!
[2696]	1168	!-- Resort the array to be output, if not done above. Flag topography
	1169	!-- grid points with fill values, using the corresponding maksing flag.
[1]	1170	IF ( .NOT. resorted ) THEN
[2512]	1171	DO i = nxl, nxr
	1172	DO j = nys, nyn
[1551]	1173	DO k = nzb_do, nzt_do
[2696]	1174	local_pf(i,j,k) = MERGE( to_be_resorted(k,j,i), &
[4346]	1175	REAL( fill_value, KIND = wp ), &
	1176	BTEST( wall_flags_total_0(k,j,i), &
	1177	flag_nr ) )
[1]	1178	ENDDO
	1179	ENDDO
	1180	ENDDO
	1181	ENDIF
	1182
	1183	!
	1184	!-- Output of the individual cross-sections, depending on the cross-
	1185	!-- section mode chosen.
	1186	is = 1
[1960]	1187	loop1: DO WHILE ( section(is,s_ind) /= -9999 .OR. two_d )
[1]	1188
	1189	SELECT CASE ( mode )
	1190
	1191	CASE ( 'xy' )
	1192	!
	1193	!-- Determine the cross section index
	1194	IF ( two_d ) THEN
	1195	layer_xy = nzb+1
	1196	ELSE
[1960]	1197	layer_xy = section(is,s_ind)
[1]	1198	ENDIF
	1199
	1200	!
[1551]	1201	!-- Exit the loop for layers beyond the data output domain
	1202	!-- (used for soil model)
[1691]	1203	IF ( layer_xy > nzt_do ) THEN
[1551]	1204	EXIT loop1
	1205	ENDIF
	1206
	1207	!
[1308]	1208	!-- Update the netCDF xy cross section time axis.
	1209	!-- In case of parallel output, this is only done by PE0
	1210	!-- to increase the performance.
[3646]	1211	IF ( time_since_reference_point /= do2d_xy_last_time(av) ) THEN
[1308]	1212	do2d_xy_time_count(av) = do2d_xy_time_count(av) + 1
[3646]	1213	do2d_xy_last_time(av) = time_since_reference_point
[1308]	1214	IF ( myid == 0 ) THEN
[1327]	1215	IF ( .NOT. data_output_2d_on_each_pe &
	1216	.OR. netcdf_data_format > 4 ) &
[493]	1217	THEN
[1]	1218	#if defined( __netcdf )
	1219	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
	1220	id_var_time_xy(av), &
[291]	1221	(/ time_since_reference_point /), &
[1]	1222	start = (/ do2d_xy_time_count(av) /), &
	1223	count = (/ 1 /) )
[1783]	1224	CALL netcdf_handle_error( 'data_output_2d', 53 )
[1]	1225	#endif
	1226	ENDIF
	1227	ENDIF
	1228	ENDIF
	1229	!
	1230	!-- If required, carry out averaging along z
[1960]	1231	IF ( section(is,s_ind) == -1 .AND. .NOT. two_d ) THEN
[1]	1232
[1353]	1233	local_2d = 0.0_wp
[1]	1234	!
	1235	!-- Carry out the averaging (all data are on the PE)
[1551]	1236	DO k = nzb_do, nzt_do
[2512]	1237	DO j = nys, nyn
	1238	DO i = nxl, nxr
[1]	1239	local_2d(i,j) = local_2d(i,j) + local_pf(i,j,k)
	1240	ENDDO
	1241	ENDDO
	1242	ENDDO
	1243
[1551]	1244	local_2d = local_2d / ( nzt_do - nzb_do + 1.0_wp)
[1]	1245
	1246	ELSE
	1247	!
	1248	!-- Just store the respective section on the local array
	1249	local_2d = local_pf(:,:,layer_xy)
	1250
	1251	ENDIF
	1252
	1253	#if defined( __parallel )
[1327]	1254	IF ( netcdf_data_format > 4 ) THEN
[1]	1255	!
[1031]	1256	!-- Parallel output in netCDF4/HDF5 format.
[493]	1257	IF ( two_d ) THEN
	1258	iis = 1
	1259	ELSE
	1260	iis = is
	1261	ENDIF
	1262
[1]	1263	#if defined( __netcdf )
[1308]	1264	!
	1265	!-- For parallel output, all cross sections are first stored
	1266	!-- here on a local array and will be written to the output
	1267	!-- file afterwards to increase the performance.
[2512]	1268	DO i = nxl, nxr
	1269	DO j = nys, nyn
[1308]	1270	local_2d_sections(i,j,iis) = local_2d(i,j)
	1271	ENDDO
	1272	ENDDO
[1]	1273	#endif
[493]	1274	ELSE
[1]	1275
[493]	1276	IF ( data_output_2d_on_each_pe ) THEN
[1]	1277	!
[493]	1278	!-- Output of partial arrays on each PE
	1279	#if defined( __netcdf )
[1327]	1280	IF ( myid == 0 ) THEN
[1320]	1281	WRITE ( 21 ) time_since_reference_point, &
[493]	1282	do2d_xy_time_count(av), av
	1283	ENDIF
	1284	#endif
[759]	1285	DO i = 0, io_blocks-1
	1286	IF ( i == io_group ) THEN
[2512]	1287	WRITE ( 21 ) nxl, nxr, nys, nyn, nys, nyn
[759]	1288	WRITE ( 21 ) local_2d
	1289	ENDIF
	1290	#if defined( __parallel )
	1291	CALL MPI_BARRIER( comm2d, ierr )
	1292	#endif
	1293	ENDDO
[559]	1294
[493]	1295	ELSE
[1]	1296	!
[493]	1297	!-- PE0 receives partial arrays from all processors and
	1298	!-- then outputs them. Here a barrier has to be set,
	1299	!-- because otherwise "-MPI- FATAL: Remote protocol queue
	1300	!-- full" may occur.
	1301	CALL MPI_BARRIER( comm2d, ierr )
	1302
[2512]	1303	ngp = ( nxr-nxl+1 ) * ( nyn-nys+1 )
[493]	1304	IF ( myid == 0 ) THEN
[1]	1305	!
[493]	1306	!-- Local array can be relocated directly.
[2512]	1307	total_2d(nxl:nxr,nys:nyn) = local_2d
[1]	1308	!
[493]	1309	!-- Receive data from all other PEs.
	1310	DO n = 1, numprocs-1
[1]	1311	!
[493]	1312	!-- Receive index limits first, then array.
	1313	!-- Index limits are received in arbitrary order from
	1314	!-- the PEs.
[1320]	1315	CALL MPI_RECV( ind(1), 4, MPI_INTEGER, &
	1316	MPI_ANY_SOURCE, 0, comm2d, &
[493]	1317	status, ierr )
	1318	sender = status(MPI_SOURCE)
	1319	DEALLOCATE( local_2d )
	1320	ALLOCATE( local_2d(ind(1):ind(2),ind(3):ind(4)) )
[1320]	1321	CALL MPI_RECV( local_2d(ind(1),ind(3)), ngp, &
	1322	MPI_REAL, sender, 1, comm2d, &
[493]	1323	status, ierr )
	1324	total_2d(ind(1):ind(2),ind(3):ind(4)) = local_2d
	1325	ENDDO
[1]	1326	!
[493]	1327	!-- Relocate the local array for the next loop increment
	1328	DEALLOCATE( local_2d )
[2512]	1329	ALLOCATE( local_2d(nxl:nxr,nys:nyn) )
[1]	1330
	1331	#if defined( __netcdf )
[1327]	1332	IF ( two_d ) THEN
	1333	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
[3554]	1334	id_var_do2d(av,ivar), &
[2512]	1335	total_2d(0:nx,0:ny), &
[1327]	1336	start = (/ 1, 1, 1, do2d_xy_time_count(av) /), &
[2512]	1337	count = (/ nx+1, ny+1, 1, 1 /) )
[1327]	1338	ELSE
	1339	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
[3554]	1340	id_var_do2d(av,ivar), &
[2512]	1341	total_2d(0:nx,0:ny), &
[1327]	1342	start = (/ 1, 1, is, do2d_xy_time_count(av) /), &
[2512]	1343	count = (/ nx+1, ny+1, 1, 1 /) )
[1]	1344	ENDIF
[1783]	1345	CALL netcdf_handle_error( 'data_output_2d', 54 )
[1]	1346	#endif
	1347
[493]	1348	ELSE
[1]	1349	!
[493]	1350	!-- First send the local index limits to PE0
[2512]	1351	ind(1) = nxl; ind(2) = nxr
	1352	ind(3) = nys; ind(4) = nyn
[1320]	1353	CALL MPI_SEND( ind(1), 4, MPI_INTEGER, 0, 0, &
[493]	1354	comm2d, ierr )
[1]	1355	!
[493]	1356	!-- Send data to PE0
[2512]	1357	CALL MPI_SEND( local_2d(nxl,nys), ngp, &
[493]	1358	MPI_REAL, 0, 1, comm2d, ierr )
	1359	ENDIF
	1360	!
	1361	!-- A barrier has to be set, because otherwise some PEs may
	1362	!-- proceed too fast so that PE0 may receive wrong data on
	1363	!-- tag 0
	1364	CALL MPI_BARRIER( comm2d, ierr )
[1]	1365	ENDIF
[493]	1366
[1]	1367	ENDIF
	1368	#else
	1369	#if defined( __netcdf )
[1327]	1370	IF ( two_d ) THEN
	1371	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
[3554]	1372	id_var_do2d(av,ivar), &
[2512]	1373	local_2d(nxl:nxr,nys:nyn), &
[1327]	1374	start = (/ 1, 1, 1, do2d_xy_time_count(av) /), &
[2512]	1375	count = (/ nx+1, ny+1, 1, 1 /) )
[1327]	1376	ELSE
	1377	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
[3554]	1378	id_var_do2d(av,ivar), &
[2512]	1379	local_2d(nxl:nxr,nys:nyn), &
[1327]	1380	start = (/ 1, 1, is, do2d_xy_time_count(av) /), &
[2512]	1381	count = (/ nx+1, ny+1, 1, 1 /) )
[1]	1382	ENDIF
[1783]	1383	CALL netcdf_handle_error( 'data_output_2d', 447 )
[1]	1384	#endif
	1385	#endif
[2277]	1386
[1]	1387	!
	1388	!-- For 2D-arrays (e.g. u*) only one cross-section is available.
	1389	!-- Hence exit loop of output levels.
	1390	IF ( two_d ) THEN
[1703]	1391	IF ( netcdf_data_format < 5 ) two_d = .FALSE.
[1]	1392	EXIT loop1
	1393	ENDIF
	1394
	1395	CASE ( 'xz' )
	1396	!
[1308]	1397	!-- Update the netCDF xz cross section time axis.
	1398	!-- In case of parallel output, this is only done by PE0
	1399	!-- to increase the performance.
[3646]	1400	IF ( time_since_reference_point /= do2d_xz_last_time(av) ) THEN
[1308]	1401	do2d_xz_time_count(av) = do2d_xz_time_count(av) + 1
[3646]	1402	do2d_xz_last_time(av) = time_since_reference_point
[1308]	1403	IF ( myid == 0 ) THEN
[1327]	1404	IF ( .NOT. data_output_2d_on_each_pe &
	1405	.OR. netcdf_data_format > 4 ) &
[493]	1406	THEN
[1]	1407	#if defined( __netcdf )
	1408	nc_stat = NF90_PUT_VAR( id_set_xz(av), &
	1409	id_var_time_xz(av), &
[291]	1410	(/ time_since_reference_point /), &
[1]	1411	start = (/ do2d_xz_time_count(av) /), &
	1412	count = (/ 1 /) )
[1783]	1413	CALL netcdf_handle_error( 'data_output_2d', 56 )
[1]	1414	#endif
	1415	ENDIF
	1416	ENDIF
	1417	ENDIF
[667]	1418
[1]	1419	!
	1420	!-- If required, carry out averaging along y
[1960]	1421	IF ( section(is,s_ind) == -1 ) THEN
[1]	1422
[2512]	1423	ALLOCATE( local_2d_l(nxl:nxr,nzb_do:nzt_do) )
[1353]	1424	local_2d_l = 0.0_wp
[2512]	1425	ngp = ( nxr-nxl + 1 ) * ( nzt_do-nzb_do + 1 )
[1]	1426	!
	1427	!-- First local averaging on the PE
[1551]	1428	DO k = nzb_do, nzt_do
[1]	1429	DO j = nys, nyn
[2512]	1430	DO i = nxl, nxr
[1320]	1431	local_2d_l(i,k) = local_2d_l(i,k) + &
[1]	1432	local_pf(i,j,k)
	1433	ENDDO
	1434	ENDDO
	1435	ENDDO
	1436	#if defined( __parallel )
	1437	!
	1438	!-- Now do the averaging over all PEs along y
[622]	1439	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2512]	1440	CALL MPI_ALLREDUCE( local_2d_l(nxl,nzb_do), &
	1441	local_2d(nxl,nzb_do), ngp, MPI_REAL, &
[1]	1442	MPI_SUM, comm1dy, ierr )
	1443	#else
	1444	local_2d = local_2d_l
	1445	#endif
[1353]	1446	local_2d = local_2d / ( ny + 1.0_wp )
[1]	1447
	1448	DEALLOCATE( local_2d_l )
	1449
	1450	ELSE
	1451	!
	1452	!-- Just store the respective section on the local array
	1453	!-- (but only if it is available on this PE!)
[1960]	1454	IF ( section(is,s_ind) >= nys .AND. section(is,s_ind) <= nyn ) &
[1]	1455	THEN
[1960]	1456	local_2d = local_pf(:,section(is,s_ind),nzb_do:nzt_do)
[1]	1457	ENDIF
	1458
	1459	ENDIF
	1460
	1461	#if defined( __parallel )
[1327]	1462	IF ( netcdf_data_format > 4 ) THEN
[1]	1463	!
[1031]	1464	!-- Output in netCDF4/HDF5 format.
[493]	1465	!-- Output only on those PEs where the respective cross
	1466	!-- sections reside. Cross sections averaged along y are
	1467	!-- output on the respective first PE along y (myidy=0).
[1960]	1468	IF ( ( section(is,s_ind) >= nys .AND. &
	1469	section(is,s_ind) <= nyn ) .OR. &
	1470	( section(is,s_ind) == -1 .AND. myidy == 0 ) ) THEN
[1]	1471	#if defined( __netcdf )
[493]	1472	!
[1308]	1473	!-- For parallel output, all cross sections are first
	1474	!-- stored here on a local array and will be written to the
	1475	!-- output file afterwards to increase the performance.
[2512]	1476	DO i = nxl, nxr
[1551]	1477	DO k = nzb_do, nzt_do
[1308]	1478	local_2d_sections_l(i,is,k) = local_2d(i,k)
	1479	ENDDO
	1480	ENDDO
[1]	1481	#endif
	1482	ENDIF
	1483
	1484	ELSE
	1485
[493]	1486	IF ( data_output_2d_on_each_pe ) THEN
[1]	1487	!
[493]	1488	!-- Output of partial arrays on each PE. If the cross
	1489	!-- section does not reside on the PE, output special
	1490	!-- index values.
	1491	#if defined( __netcdf )
[1327]	1492	IF ( myid == 0 ) THEN
[1320]	1493	WRITE ( 22 ) time_since_reference_point, &
[493]	1494	do2d_xz_time_count(av), av
	1495	ENDIF
	1496	#endif
[759]	1497	DO i = 0, io_blocks-1
	1498	IF ( i == io_group ) THEN
[1960]	1499	IF ( ( section(is,s_ind) >= nys .AND. &
	1500	section(is,s_ind) <= nyn ) .OR. &
	1501	( section(is,s_ind) == -1 .AND. &
[1320]	1502	nys-1 == -1 ) ) &
[759]	1503	THEN
[2512]	1504	WRITE (22) nxl, nxr, nzb_do, nzt_do, nzb, nzt+1
[759]	1505	WRITE (22) local_2d
	1506	ELSE
[1551]	1507	WRITE (22) -1, -1, -1, -1, -1, -1
[759]	1508	ENDIF
	1509	ENDIF
	1510	#if defined( __parallel )
	1511	CALL MPI_BARRIER( comm2d, ierr )
	1512	#endif
	1513	ENDDO
[493]	1514
	1515	ELSE
[1]	1516	!
[493]	1517	!-- PE0 receives partial arrays from all processors of the
	1518	!-- respective cross section and outputs them. Here a
	1519	!-- barrier has to be set, because otherwise
	1520	!-- "-MPI- FATAL: Remote protocol queue full" may occur.
	1521	CALL MPI_BARRIER( comm2d, ierr )
	1522
[2512]	1523	ngp = ( nxr-nxl + 1 ) * ( nzt_do-nzb_do + 1 )
[493]	1524	IF ( myid == 0 ) THEN
[1]	1525	!
[493]	1526	!-- Local array can be relocated directly.
[1960]	1527	IF ( ( section(is,s_ind) >= nys .AND. &
	1528	section(is,s_ind) <= nyn ) .OR. &
	1529	( section(is,s_ind) == -1 .AND. &
	1530	nys-1 == -1 ) ) THEN
[2512]	1531	total_2d(nxl:nxr,nzb_do:nzt_do) = local_2d
[493]	1532	ENDIF
[1]	1533	!
[493]	1534	!-- Receive data from all other PEs.
	1535	DO n = 1, numprocs-1
	1536	!
	1537	!-- Receive index limits first, then array.
	1538	!-- Index limits are received in arbitrary order from
	1539	!-- the PEs.
[1320]	1540	CALL MPI_RECV( ind(1), 4, MPI_INTEGER, &
	1541	MPI_ANY_SOURCE, 0, comm2d, &
[1]	1542	status, ierr )
[493]	1543	!
	1544	!-- Not all PEs have data for XZ-cross-section.
	1545	IF ( ind(1) /= -9999 ) THEN
	1546	sender = status(MPI_SOURCE)
	1547	DEALLOCATE( local_2d )
[1320]	1548	ALLOCATE( local_2d(ind(1):ind(2), &
[493]	1549	ind(3):ind(4)) )
	1550	CALL MPI_RECV( local_2d(ind(1),ind(3)), ngp, &
	1551	MPI_REAL, sender, 1, comm2d, &
	1552	status, ierr )
[1320]	1553	total_2d(ind(1):ind(2),ind(3):ind(4)) = &
[493]	1554	local_2d
	1555	ENDIF
	1556	ENDDO
	1557	!
	1558	!-- Relocate the local array for the next loop increment
	1559	DEALLOCATE( local_2d )
[2512]	1560	ALLOCATE( local_2d(nxl:nxr,nzb_do:nzt_do) )
[1]	1561
	1562	#if defined( __netcdf )
[2512]	1563	nc_stat = NF90_PUT_VAR( id_set_xz(av), &
[3554]	1564	id_var_do2d(av,ivar), &
[2512]	1565	total_2d(0:nx,nzb_do:nzt_do), &
	1566	start = (/ 1, is, 1, do2d_xz_time_count(av) /), &
	1567	count = (/ nx+1, 1, nzt_do-nzb_do+1, 1 /) )
[1783]	1568	CALL netcdf_handle_error( 'data_output_2d', 58 )
[1]	1569	#endif
	1570
[493]	1571	ELSE
[1]	1572	!
[493]	1573	!-- If the cross section resides on the PE, send the
	1574	!-- local index limits, otherwise send -9999 to PE0.
[1960]	1575	IF ( ( section(is,s_ind) >= nys .AND. &
	1576	section(is,s_ind) <= nyn ) .OR. &
	1577	( section(is,s_ind) == -1 .AND. nys-1 == -1 ) ) &
[493]	1578	THEN
[2512]	1579	ind(1) = nxl; ind(2) = nxr
[1551]	1580	ind(3) = nzb_do; ind(4) = nzt_do
[493]	1581	ELSE
	1582	ind(1) = -9999; ind(2) = -9999
	1583	ind(3) = -9999; ind(4) = -9999
	1584	ENDIF
[1320]	1585	CALL MPI_SEND( ind(1), 4, MPI_INTEGER, 0, 0, &
[493]	1586	comm2d, ierr )
	1587	!
	1588	!-- If applicable, send data to PE0.
	1589	IF ( ind(1) /= -9999 ) THEN
[2512]	1590	CALL MPI_SEND( local_2d(nxl,nzb_do), ngp, &
[493]	1591	MPI_REAL, 0, 1, comm2d, ierr )
	1592	ENDIF
[1]	1593	ENDIF
	1594	!
[493]	1595	!-- A barrier has to be set, because otherwise some PEs may
	1596	!-- proceed too fast so that PE0 may receive wrong data on
	1597	!-- tag 0
	1598	CALL MPI_BARRIER( comm2d, ierr )
[1]	1599	ENDIF
[493]	1600
[1]	1601	ENDIF
	1602	#else
	1603	#if defined( __netcdf )
[1327]	1604	nc_stat = NF90_PUT_VAR( id_set_xz(av), &
[3554]	1605	id_var_do2d(av,ivar), &
[2512]	1606	local_2d(nxl:nxr,nzb_do:nzt_do), &
[1327]	1607	start = (/ 1, is, 1, do2d_xz_time_count(av) /), &
[2512]	1608	count = (/ nx+1, 1, nzt_do-nzb_do+1, 1 /) )
[1783]	1609	CALL netcdf_handle_error( 'data_output_2d', 451 )
[1]	1610	#endif
	1611	#endif
	1612
	1613	CASE ( 'yz' )
	1614	!
[1308]	1615	!-- Update the netCDF yz cross section time axis.
	1616	!-- In case of parallel output, this is only done by PE0
	1617	!-- to increase the performance.
[3646]	1618	IF ( time_since_reference_point /= do2d_yz_last_time(av) ) THEN
[1308]	1619	do2d_yz_time_count(av) = do2d_yz_time_count(av) + 1
[3646]	1620	do2d_yz_last_time(av) = time_since_reference_point
[1308]	1621	IF ( myid == 0 ) THEN
[1327]	1622	IF ( .NOT. data_output_2d_on_each_pe &
	1623	.OR. netcdf_data_format > 4 ) &
[493]	1624	THEN
[1]	1625	#if defined( __netcdf )
	1626	nc_stat = NF90_PUT_VAR( id_set_yz(av), &
	1627	id_var_time_yz(av), &
[291]	1628	(/ time_since_reference_point /), &
[1]	1629	start = (/ do2d_yz_time_count(av) /), &
	1630	count = (/ 1 /) )
[1783]	1631	CALL netcdf_handle_error( 'data_output_2d', 59 )
[1]	1632	#endif
	1633	ENDIF
	1634	ENDIF
[1308]	1635	ENDIF
[493]	1636
[1]	1637	!
	1638	!-- If required, carry out averaging along x
[1960]	1639	IF ( section(is,s_ind) == -1 ) THEN
[1]	1640
[2512]	1641	ALLOCATE( local_2d_l(nys:nyn,nzb_do:nzt_do) )
[1353]	1642	local_2d_l = 0.0_wp
[2512]	1643	ngp = ( nyn-nys+1 ) * ( nzt_do-nzb_do+1 )
[1]	1644	!
	1645	!-- First local averaging on the PE
[1551]	1646	DO k = nzb_do, nzt_do
[2512]	1647	DO j = nys, nyn
[1]	1648	DO i = nxl, nxr
[1320]	1649	local_2d_l(j,k) = local_2d_l(j,k) + &
[1]	1650	local_pf(i,j,k)
	1651	ENDDO
	1652	ENDDO
	1653	ENDDO
	1654	#if defined( __parallel )
	1655	!
	1656	!-- Now do the averaging over all PEs along x
[622]	1657	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2512]	1658	CALL MPI_ALLREDUCE( local_2d_l(nys,nzb_do), &
	1659	local_2d(nys,nzb_do), ngp, MPI_REAL, &
[1]	1660	MPI_SUM, comm1dx, ierr )
	1661	#else
	1662	local_2d = local_2d_l
	1663	#endif
[1353]	1664	local_2d = local_2d / ( nx + 1.0_wp )
[1]	1665
	1666	DEALLOCATE( local_2d_l )
	1667
	1668	ELSE
	1669	!
	1670	!-- Just store the respective section on the local array
	1671	!-- (but only if it is available on this PE!)
[1960]	1672	IF ( section(is,s_ind) >= nxl .AND. section(is,s_ind) <= nxr ) &
[1]	1673	THEN
[1960]	1674	local_2d = local_pf(section(is,s_ind),:,nzb_do:nzt_do)
[1]	1675	ENDIF
	1676
	1677	ENDIF
	1678
	1679	#if defined( __parallel )
[1327]	1680	IF ( netcdf_data_format > 4 ) THEN
[1]	1681	!
[1031]	1682	!-- Output in netCDF4/HDF5 format.
[493]	1683	!-- Output only on those PEs where the respective cross
	1684	!-- sections reside. Cross sections averaged along x are
	1685	!-- output on the respective first PE along x (myidx=0).
[1960]	1686	IF ( ( section(is,s_ind) >= nxl .AND. &
	1687	section(is,s_ind) <= nxr ) .OR. &
	1688	( section(is,s_ind) == -1 .AND. myidx == 0 ) ) THEN
[1]	1689	#if defined( __netcdf )
[493]	1690	!
[1308]	1691	!-- For parallel output, all cross sections are first
	1692	!-- stored here on a local array and will be written to the
	1693	!-- output file afterwards to increase the performance.
[2512]	1694	DO j = nys, nyn
[1551]	1695	DO k = nzb_do, nzt_do
[1308]	1696	local_2d_sections_l(is,j,k) = local_2d(j,k)
	1697	ENDDO
	1698	ENDDO
[1]	1699	#endif
	1700	ENDIF
	1701
	1702	ELSE
	1703
[493]	1704	IF ( data_output_2d_on_each_pe ) THEN
[1]	1705	!
[493]	1706	!-- Output of partial arrays on each PE. If the cross
	1707	!-- section does not reside on the PE, output special
	1708	!-- index values.
	1709	#if defined( __netcdf )
[1327]	1710	IF ( myid == 0 ) THEN
[1320]	1711	WRITE ( 23 ) time_since_reference_point, &
[493]	1712	do2d_yz_time_count(av), av
	1713	ENDIF
	1714	#endif
[759]	1715	DO i = 0, io_blocks-1
	1716	IF ( i == io_group ) THEN
[1960]	1717	IF ( ( section(is,s_ind) >= nxl .AND. &
	1718	section(is,s_ind) <= nxr ) .OR. &
	1719	( section(is,s_ind) == -1 .AND. &
[1320]	1720	nxl-1 == -1 ) ) &
[759]	1721	THEN
[2512]	1722	WRITE (23) nys, nyn, nzb_do, nzt_do, nzb, nzt+1
[759]	1723	WRITE (23) local_2d
	1724	ELSE
[1551]	1725	WRITE (23) -1, -1, -1, -1, -1, -1
[759]	1726	ENDIF
	1727	ENDIF
	1728	#if defined( __parallel )
	1729	CALL MPI_BARRIER( comm2d, ierr )
	1730	#endif
	1731	ENDDO
[493]	1732
	1733	ELSE
[1]	1734	!
[493]	1735	!-- PE0 receives partial arrays from all processors of the
	1736	!-- respective cross section and outputs them. Here a
	1737	!-- barrier has to be set, because otherwise
	1738	!-- "-MPI- FATAL: Remote protocol queue full" may occur.
	1739	CALL MPI_BARRIER( comm2d, ierr )
	1740
[2512]	1741	ngp = ( nyn-nys+1 ) * ( nzt_do-nzb_do+1 )
[493]	1742	IF ( myid == 0 ) THEN
[1]	1743	!
[493]	1744	!-- Local array can be relocated directly.
[1960]	1745	IF ( ( section(is,s_ind) >= nxl .AND. &
	1746	section(is,s_ind) <= nxr ) .OR. &
	1747	( section(is,s_ind) == -1 .AND. nxl-1 == -1 ) ) &
[493]	1748	THEN
[2512]	1749	total_2d(nys:nyn,nzb_do:nzt_do) = local_2d
[493]	1750	ENDIF
[1]	1751	!
[493]	1752	!-- Receive data from all other PEs.
	1753	DO n = 1, numprocs-1
	1754	!
	1755	!-- Receive index limits first, then array.
	1756	!-- Index limits are received in arbitrary order from
	1757	!-- the PEs.
[1320]	1758	CALL MPI_RECV( ind(1), 4, MPI_INTEGER, &
	1759	MPI_ANY_SOURCE, 0, comm2d, &
[1]	1760	status, ierr )
[493]	1761	!
	1762	!-- Not all PEs have data for YZ-cross-section.
	1763	IF ( ind(1) /= -9999 ) THEN
	1764	sender = status(MPI_SOURCE)
	1765	DEALLOCATE( local_2d )
[1320]	1766	ALLOCATE( local_2d(ind(1):ind(2), &
[493]	1767	ind(3):ind(4)) )
	1768	CALL MPI_RECV( local_2d(ind(1),ind(3)), ngp, &
	1769	MPI_REAL, sender, 1, comm2d, &
	1770	status, ierr )
[1320]	1771	total_2d(ind(1):ind(2),ind(3):ind(4)) = &
[493]	1772	local_2d
	1773	ENDIF
	1774	ENDDO
	1775	!
	1776	!-- Relocate the local array for the next loop increment
	1777	DEALLOCATE( local_2d )
[2512]	1778	ALLOCATE( local_2d(nys:nyn,nzb_do:nzt_do) )
[1]	1779
	1780	#if defined( __netcdf )
[2512]	1781	nc_stat = NF90_PUT_VAR( id_set_yz(av), &
[3554]	1782	id_var_do2d(av,ivar), &
[2512]	1783	total_2d(0:ny,nzb_do:nzt_do), &
	1784	start = (/ is, 1, 1, do2d_yz_time_count(av) /), &
	1785	count = (/ 1, ny+1, nzt_do-nzb_do+1, 1 /) )
[1783]	1786	CALL netcdf_handle_error( 'data_output_2d', 61 )
[1]	1787	#endif
	1788
[493]	1789	ELSE
[1]	1790	!
[493]	1791	!-- If the cross section resides on the PE, send the
	1792	!-- local index limits, otherwise send -9999 to PE0.
[1960]	1793	IF ( ( section(is,s_ind) >= nxl .AND. &
	1794	section(is,s_ind) <= nxr ) .OR. &
	1795	( section(is,s_ind) == -1 .AND. nxl-1 == -1 ) ) &
[493]	1796	THEN
[2512]	1797	ind(1) = nys; ind(2) = nyn
[1551]	1798	ind(3) = nzb_do; ind(4) = nzt_do
[493]	1799	ELSE
	1800	ind(1) = -9999; ind(2) = -9999
	1801	ind(3) = -9999; ind(4) = -9999
	1802	ENDIF
[1320]	1803	CALL MPI_SEND( ind(1), 4, MPI_INTEGER, 0, 0, &
[493]	1804	comm2d, ierr )
	1805	!
	1806	!-- If applicable, send data to PE0.
	1807	IF ( ind(1) /= -9999 ) THEN
[2512]	1808	CALL MPI_SEND( local_2d(nys,nzb_do), ngp, &
[493]	1809	MPI_REAL, 0, 1, comm2d, ierr )
	1810	ENDIF
[1]	1811	ENDIF
	1812	!
[493]	1813	!-- A barrier has to be set, because otherwise some PEs may
	1814	!-- proceed too fast so that PE0 may receive wrong data on
	1815	!-- tag 0
	1816	CALL MPI_BARRIER( comm2d, ierr )
[1]	1817	ENDIF
[493]	1818
[1]	1819	ENDIF
	1820	#else
	1821	#if defined( __netcdf )
[1327]	1822	nc_stat = NF90_PUT_VAR( id_set_yz(av), &
[3554]	1823	id_var_do2d(av,ivar), &
[2512]	1824	local_2d(nys:nyn,nzb_do:nzt_do), &
[1327]	1825	start = (/ is, 1, 1, do2d_xz_time_count(av) /), &
[2512]	1826	count = (/ 1, ny+1, nzt_do-nzb_do+1, 1 /) )
[1783]	1827	CALL netcdf_handle_error( 'data_output_2d', 452 )
[1]	1828	#endif
	1829	#endif
	1830
	1831	END SELECT
	1832
	1833	is = is + 1
	1834	ENDDO loop1
	1835
[1308]	1836	!
	1837	!-- For parallel output, all data were collected before on a local array
	1838	!-- and are written now to the netcdf file. This must be done to increase
	1839	!-- the performance of the parallel output.
	1840	#if defined( __netcdf )
[1327]	1841	IF ( netcdf_data_format > 4 ) THEN
[1308]	1842
	1843	SELECT CASE ( mode )
	1844
	1845	CASE ( 'xy' )
	1846	IF ( two_d ) THEN
[1703]	1847	nis = 1
	1848	two_d = .FALSE.
[1308]	1849	ELSE
[1703]	1850	nis = ns
[1308]	1851	ENDIF
	1852	!
	1853	!-- Do not output redundant ghost point data except for the
	1854	!-- boundaries of the total domain.
[2512]	1855	! IF ( nxr == nx .AND. nyn /= ny ) THEN
	1856	! nc_stat = NF90_PUT_VAR( id_set_xy(av), &
[3554]	1857	! id_var_do2d(av,ivar), &
[2512]	1858	! local_2d_sections(nxl:nxr+1, &
	1859	! nys:nyn,1:nis), &
	1860	! start = (/ nxl+1, nys+1, 1, &
	1861	! do2d_xy_time_count(av) /), &
	1862	! count = (/ nxr-nxl+2, &
	1863	! nyn-nys+1, nis, 1 &
	1864	! /) )
	1865	! ELSEIF ( nxr /= nx .AND. nyn == ny ) THEN
	1866	! nc_stat = NF90_PUT_VAR( id_set_xy(av), &
[3554]	1867	! id_var_do2d(av,ivar), &
[2512]	1868	! local_2d_sections(nxl:nxr, &
	1869	! nys:nyn+1,1:nis), &
	1870	! start = (/ nxl+1, nys+1, 1, &
	1871	! do2d_xy_time_count(av) /), &
	1872	! count = (/ nxr-nxl+1, &
	1873	! nyn-nys+2, nis, 1 &
	1874	! /) )
	1875	! ELSEIF ( nxr == nx .AND. nyn == ny ) THEN
	1876	! nc_stat = NF90_PUT_VAR( id_set_xy(av), &
[3554]	1877	! id_var_do2d(av,ivar), &
[2512]	1878	! local_2d_sections(nxl:nxr+1, &
	1879	! nys:nyn+1,1:nis), &
	1880	! start = (/ nxl+1, nys+1, 1, &
	1881	! do2d_xy_time_count(av) /), &
	1882	! count = (/ nxr-nxl+2, &
	1883	! nyn-nys+2, nis, 1 &
	1884	! /) )
	1885	! ELSE
[1308]	1886	nc_stat = NF90_PUT_VAR( id_set_xy(av), &
[3554]	1887	id_var_do2d(av,ivar), &
[1308]	1888	local_2d_sections(nxl:nxr, &
[1703]	1889	nys:nyn,1:nis), &
[1308]	1890	start = (/ nxl+1, nys+1, 1, &
	1891	do2d_xy_time_count(av) /), &
	1892	count = (/ nxr-nxl+1, &
[1703]	1893	nyn-nys+1, nis, 1 &
[1308]	1894	/) )
[2512]	1895	! ENDIF
[1308]	1896
[1783]	1897	CALL netcdf_handle_error( 'data_output_2d', 55 )
[1308]	1898
	1899	CASE ( 'xz' )
	1900	!
	1901	!-- First, all PEs get the information of all cross-sections.
	1902	!-- Then the data are written to the output file by all PEs
	1903	!-- while NF90_COLLECTIVE is set in subroutine
	1904	!-- define_netcdf_header. Although redundant information are
	1905	!-- written to the output file in that case, the performance
	1906	!-- is significantly better compared to the case where only
	1907	!-- the first row of PEs in x-direction (myidx = 0) is given
	1908	!-- the output while NF90_INDEPENDENT is set.
	1909	IF ( npey /= 1 ) THEN
	1910
	1911	#if defined( __parallel )
	1912	!
	1913	!-- Distribute data over all PEs along y
[2512]	1914	ngp = ( nxr-nxl+1 ) * ( nzt_do-nzb_do+1 ) * ns
[1308]	1915	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2512]	1916	CALL MPI_ALLREDUCE( local_2d_sections_l(nxl,1,nzb_do), &
	1917	local_2d_sections(nxl,1,nzb_do), &
[1308]	1918	ngp, MPI_REAL, MPI_SUM, comm1dy, &
	1919	ierr )
	1920	#else
	1921	local_2d_sections = local_2d_sections_l
	1922	#endif
	1923	ENDIF
	1924	!
	1925	!-- Do not output redundant ghost point data except for the
	1926	!-- boundaries of the total domain.
[2512]	1927	! IF ( nxr == nx ) THEN
	1928	! nc_stat = NF90_PUT_VAR( id_set_xz(av), &
[3554]	1929	! id_var_do2d(av,ivar), &
[2512]	1930	! local_2d_sections(nxl:nxr+1,1:ns, &
	1931	! nzb_do:nzt_do), &
	1932	! start = (/ nxl+1, 1, 1, &
	1933	! do2d_xz_time_count(av) /), &
	1934	! count = (/ nxr-nxl+2, ns, nzt_do-nzb_do+1, &
	1935	! 1 /) )
	1936	! ELSE
[1308]	1937	nc_stat = NF90_PUT_VAR( id_set_xz(av), &
[3554]	1938	id_var_do2d(av,ivar), &
[1308]	1939	local_2d_sections(nxl:nxr,1:ns, &
[1551]	1940	nzb_do:nzt_do), &
[1308]	1941	start = (/ nxl+1, 1, 1, &
	1942	do2d_xz_time_count(av) /), &
[1551]	1943	count = (/ nxr-nxl+1, ns, nzt_do-nzb_do+1, &
[1308]	1944	1 /) )
[2512]	1945	! ENDIF
[1308]	1946
[1783]	1947	CALL netcdf_handle_error( 'data_output_2d', 57 )
[1308]	1948
	1949	CASE ( 'yz' )
	1950	!
	1951	!-- First, all PEs get the information of all cross-sections.
	1952	!-- Then the data are written to the output file by all PEs
	1953	!-- while NF90_COLLECTIVE is set in subroutine
	1954	!-- define_netcdf_header. Although redundant information are
	1955	!-- written to the output file in that case, the performance
	1956	!-- is significantly better compared to the case where only
	1957	!-- the first row of PEs in y-direction (myidy = 0) is given
	1958	!-- the output while NF90_INDEPENDENT is set.
	1959	IF ( npex /= 1 ) THEN
	1960
	1961	#if defined( __parallel )
	1962	!
	1963	!-- Distribute data over all PEs along x
[2512]	1964	ngp = ( nyn-nys+1 ) * ( nzt-nzb + 2 ) * ns
[1308]	1965	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[2512]	1966	CALL MPI_ALLREDUCE( local_2d_sections_l(1,nys,nzb_do), &
	1967	local_2d_sections(1,nys,nzb_do), &
[1308]	1968	ngp, MPI_REAL, MPI_SUM, comm1dx, &
	1969	ierr )
	1970	#else
	1971	local_2d_sections = local_2d_sections_l
	1972	#endif
	1973	ENDIF
	1974	!
	1975	!-- Do not output redundant ghost point data except for the
	1976	!-- boundaries of the total domain.
[2512]	1977	! IF ( nyn == ny ) THEN
	1978	! nc_stat = NF90_PUT_VAR( id_set_yz(av), &
[3554]	1979	! id_var_do2d(av,ivar), &
[2512]	1980	! local_2d_sections(1:ns, &
	1981	! nys:nyn+1,nzb_do:nzt_do), &
	1982	! start = (/ 1, nys+1, 1, &
	1983	! do2d_yz_time_count(av) /), &
	1984	! count = (/ ns, nyn-nys+2, &
	1985	! nzt_do-nzb_do+1, 1 /) )
	1986	! ELSE
[1308]	1987	nc_stat = NF90_PUT_VAR( id_set_yz(av), &
[3554]	1988	id_var_do2d(av,ivar), &
[1308]	1989	local_2d_sections(1:ns,nys:nyn, &
[1551]	1990	nzb_do:nzt_do), &
[1308]	1991	start = (/ 1, nys+1, 1, &
	1992	do2d_yz_time_count(av) /), &
	1993	count = (/ ns, nyn-nys+1, &
[1551]	1994	nzt_do-nzb_do+1, 1 /) )
[2512]	1995	! ENDIF
[1308]	1996
[1783]	1997	CALL netcdf_handle_error( 'data_output_2d', 60 )
[1308]	1998
	1999	CASE DEFAULT
	2000	message_string = 'unknown cross-section: ' // TRIM( mode )
	2001	CALL message( 'data_output_2d', 'PA0180', 1, 2, 0, 6, 0 )
	2002
	2003	END SELECT
	2004
	2005	ENDIF
[1311]	2006	#endif
[1]	2007	ENDIF
	2008
[3554]	2009	ivar = ivar + 1
	2010	l = MAX( 2, LEN_TRIM( do2d(av,ivar) ) )
	2011	do2d_mode = do2d(av,ivar)(l-1:l)
[1]	2012
	2013	ENDDO
	2014
	2015	!
	2016	!-- Deallocate temporary arrays.
	2017	IF ( ALLOCATED( level_z ) ) DEALLOCATE( level_z )
[1308]	2018	IF ( netcdf_data_format > 4 ) THEN
	2019	DEALLOCATE( local_pf, local_2d, local_2d_sections )
	2020	IF( mode == 'xz' .OR. mode == 'yz' ) DEALLOCATE( local_2d_sections_l )
	2021	ENDIF
[1]	2022	#if defined( __parallel )
	2023	IF ( .NOT. data_output_2d_on_each_pe .AND. myid == 0 ) THEN
	2024	DEALLOCATE( total_2d )
	2025	ENDIF
	2026	#endif
	2027
	2028	!
	2029	!-- Close plot output file.
[1960]	2030	file_id = 20 + s_ind
[1]	2031
	2032	IF ( data_output_2d_on_each_pe ) THEN
[759]	2033	DO i = 0, io_blocks-1
	2034	IF ( i == io_group ) THEN
	2035	CALL close_file( file_id )
	2036	ENDIF
	2037	#if defined( __parallel )
	2038	CALL MPI_BARRIER( comm2d, ierr )
	2039	#endif
	2040	ENDDO
[1]	2041	ELSE
	2042	IF ( myid == 0 ) CALL close_file( file_id )
	2043	ENDIF
	2044
[1318]	2045	CALL cpu_log( log_point(3), 'data_output_2d', 'stop' )
[1]	2046
[3987]	2047	IF ( debug_output_timestep ) CALL debug_message( 'data_output_2d', 'end' )
[3885]	2048
[3987]	2049
[1]	2050	END SUBROUTINE data_output_2d

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |