Home

Context Navigation

source: palm/trunk/SOURCE/cpulog_mod.f90 @ 4558

Last change on this file since 4558 was 4549, checked in by raasch, 4 years ago
bugfix for r4539: values for min/max/rms stored in separate arrays
Property svn:keywords set to `Id`
File size: 23.0 KB

Rev	Line
[1850]	1	!> @file cpulog_mod.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[4360]	17	! Copyright 1997-2020 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[1403]	22	!
[3049]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: cpulog_mod.f90 4549 2020-05-29 09:27:29Z moh.hefny $
[4549]	27	! bugfix for r4539: values for min/max/rms stored in separate arrays
	28	!
	29	! 4539 2020-05-18 14:05:17Z raasch
[4539]	30	! code re-structured,
	31	! cpu time per grid point and timestep does not included initialization and spinup any more
	32	!
	33	! 4536 2020-05-17 17:24:13Z raasch
[4536]	34	! restart I/O transfer speed added
	35	!
	36	! 4429 2020-02-27 15:24:30Z raasch
[4429]	37	! bugfix: cpp-directives added for serial mode
	38	!
	39	! 4378 2020-01-16 13:22:48Z Giersch
[4378]	40	! Format of rms output changed to allow values >= 100
	41	!
	42	! 4360 2020-01-07 11:25:50Z suehring
[4182]	43	! Corrected "Former revisions" section
	44	!
	45	! 4015 2019-06-05 13:25:35Z raasch
[4015]	46	! all reals changed to double precision in order to work with 32-bit working precision,
	47	! otherwise calculated time intervals would mostly give zero
	48	!
	49	! 3885 2019-04-11 11:29:34Z kanani
[3885]	50	! Changes related to global restructuring of location messages and introduction
	51	! of additional debug messages
	52	!
	53	! 3655 2019-01-07 16:51:22Z knoop
[3483]	54	! output format limited to a maximum line length of 80
[2716]	55	!
[4182]	56	! Revision 1.1 1997/07/24 11:12:29 raasch
	57	! Initial revision
	58	!
	59	!
[1]	60	! Description:
	61	! ------------
[1682]	62	!> CPU-time measurements for any program part whatever. Results of the
	63	!> measurements are output at the end of the run in local file CPU_MEASURES.
	64	!>
	65	!> To measure the CPU-time (better to say the wallclock time) of a specific code
	66	!> segment, two calls of cpu_log have to be used as brackets in front and at the
	67	!> end of the segment:
	68	!>
	69	!> CALL cpu_log( log_point(n), 'any identifier', 'start' )
	70	!> ... code segment ...
	71	!> CALL cpu_log( log_point(n), 'any identifier', 'stop' )
	72	!>
	73	!> Parts of the code segment can be excluded from the measurement by additional
	74	!> call of cpu_log:
	75	!>
	76	!> ... first segment to be measured
	77	!> CALL cpu_log( log_point(n), 'any identifier', 'pause' )
	78	!> ... oart of segment to be excluded from measurement
	79	!> CALL cpu_log( log_point(n), 'any identifier', 'continue' )
	80	!> ... second segment to be mesasured
	81	!>
	82	!> n is an INTEGER within the interval [1,100] defining the id of the specific
	83	!> code segment, 'any identifier' is a string describing the code segment to be
	84	!> measured. It can be freely chosen and results will appear under this name in
	85	!> file CPU_MEASURES. ids can only be used once. If you like to do a
	86	!> measurement of a new part of the code, please look for an id which is unused
	87	!> ao far.
	88	!>
[2932]	89	!> runtime_parameters-parameter cpu_log_barrierwait can be used to set an MPI
	90	!> barrier at the beginning of the measurement (modus 'start' or 'continue'),
	91	!> to avoid that idle times (due to MPI calls in the code segment, which are
[1682]	92	!> waiting for other processes to be finished) affect the measurements.
	93	!> If barriers shall not be used at all, a fourth, optional parameter has to be
	94	!> given:
	95	!>
	96	!> CALL cpu_log( ..., ..., 'start', cpu_log_nowait )
	97	!>
	98	!> Variable log_point should be used for non-overlapping code segments, and they
	99	!> should sum up to the total cpu-time required by the complete run.
	100	!> Variable log_point_s can be used for any other special (s) measurements.
[3]	101	!------------------------------------------------------------------------------!
[1682]	102	MODULE cpulog
	103
[1]	104
[4015]	105	USE control_parameters, &
[4536]	106	ONLY: message_string, nr_timesteps_this_run, restart_data_format_output, &
	107	restart_file_size, run_description_header, synchronous_exchange, write_binary
[1320]	108
[4015]	109	USE indices, &
[2266]	110	ONLY: ngp_3d, nx, ny, nz
[1320]	111
	112	USE kinds
	113
[1]	114	USE pegrid
	115
	116	IMPLICIT NONE
	117
[1318]	118	PRIVATE
[4015]	119	PUBLIC cpu_log, cpu_log_barrierwait, cpu_log_nowait, cpu_statistics, initial_wallclock_time, &
	120	log_point, log_point_s
[1]	121
[1318]	122	INTERFACE cpu_log
	123	MODULE PROCEDURE cpu_log
	124	END INTERFACE cpu_log
	125
	126	INTERFACE cpu_statistics
	127	MODULE PROCEDURE cpu_statistics
	128	END INTERFACE cpu_statistics
	129
[1682]	130	INTEGER(iwp), PARAMETER :: cpu_log_continue = 0 !<
	131	INTEGER(iwp), PARAMETER :: cpu_log_pause = 1 !<
	132	INTEGER(iwp), PARAMETER :: cpu_log_start = 2 !<
	133	INTEGER(iwp), PARAMETER :: cpu_log_stop = 3 !<
[1318]	134
[1682]	135	LOGICAL :: cpu_log_barrierwait = .FALSE. !<
	136	LOGICAL, PARAMETER :: cpu_log_nowait = .FALSE. !<
[1318]	137
[4015]	138	REAL(dp) :: initial_wallclock_time !<
[1318]	139
	140	TYPE logpoint
[4015]	141	REAL(dp) :: isum !<
	142	REAL(dp) :: ivect !<
	143	REAL(dp) :: mean !<
	144	REAL(dp) :: mtime !<
	145	REAL(dp) :: mtimevec !<
	146	REAL(dp) :: sum !<
	147	REAL(dp) :: vector !<
[1682]	148	INTEGER(iwp) :: counts !<
[1931]	149	CHARACTER (LEN=25) :: place !<
[1318]	150	END TYPE logpoint
	151
[4015]	152	TYPE(logpoint), DIMENSION(100) :: log_point = logpoint( 0.0_dp, 0.0_dp, 0.0_dp, 0.0_dp, &
	153	0.0_dp, 0.0_dp, 0.0_dp, 0, ' ' )
	154	TYPE(logpoint), DIMENSION(100) :: log_point_s = logpoint( 0.0_dp, 0.0_dp, 0.0_dp, 0.0_dp, &
	155	0.0_dp, 0.0_dp, 0.0_dp, 0, ' ' )
[1318]	156
	157	SAVE
	158
	159	CONTAINS
	160
[1682]	161	!------------------------------------------------------------------------------!
	162	! Description:
	163	! ------------
	164	!> @todo Missing subroutine description.
	165	!------------------------------------------------------------------------------!
[1318]	166	SUBROUTINE cpu_log( log_event, place, modus, barrierwait )
	167
	168	IMPLICIT NONE
	169
[1682]	170	CHARACTER (LEN=*) :: modus !<
	171	CHARACTER (LEN=*) :: place !<
[1320]	172
[1682]	173	LOGICAL :: wait_allowed !<
	174	LOGICAL, OPTIONAL :: barrierwait !<
	175	LOGICAL, SAVE :: first = .TRUE. !<
[1320]	176
[4015]	177	REAL(dp) :: mtime = 0.0_dp !<
	178	REAL(dp) :: mtimevec = 0.0_dp !<
[1682]	179	TYPE(logpoint) :: log_event !<
[1318]	180
[1682]	181	INTEGER(idp) :: count !<
	182	INTEGER(idp) :: count_rate !<
[1]	183
	184
	185	!
[1318]	186	!-- Initialize and check, respectively, point of measurement
	187	IF ( log_event%place == ' ' ) THEN
	188	log_event%place = place
	189	ELSEIF ( log_event%place /= place ) THEN
[4015]	190	WRITE( message_string, * ) 'wrong argument expected: ', &
	191	TRIM(log_event%place), ' given: ', TRIM( place )
[1318]	192	CALL message( 'cpu_log', 'PA0174', 1, 2, 0, 6, 0 )
	193	ENDIF
[1]	194
	195	!
[1318]	196	!-- Determine, if barriers are allowed to set
	197	IF ( PRESENT( barrierwait ) ) THEN
	198	wait_allowed = barrierwait
	199	ELSE
	200	wait_allowed = .TRUE.
	201	ENDIF
	202
	203	!
	204	!-- MPI barrier, if requested, in order to avoid measuring wait times
	205	!-- caused by MPI routines waiting for other MPI routines of other
	206	!-- PEs that have not yet finished
	207	#if defined( __parallel )
[4015]	208	IF ( cpu_log_barrierwait .AND. wait_allowed .AND. &
[1318]	209	( modus == 'start' .OR. modus == 'continue' ) ) THEN
	210	CALL MPI_BARRIER( comm2d, ierr )
	211	ENDIF
	212	#endif
	213
	214	!
	215	!-- Take current time
	216	CALL SYSTEM_CLOCK( count, count_rate )
[4015]	217	mtime = REAL( count, KIND=dp ) / REAL( count_rate, KIND=dp )
[1]	218
	219	!
[1318]	220	!-- Start, stop or pause measurement
	221	IF ( modus == 'start' .OR. modus == 'continue' ) THEN
	222	log_event%mtime = mtime
	223	log_event%mtimevec = mtimevec
	224	ELSEIF ( modus == 'pause' ) THEN
	225	IF ( ( mtime - log_event%mtime ) < 0.0 .AND. first ) THEN
[4015]	226	WRITE( message_string, * ) 'negative time interval occured', &
	227	'&PE',myid,' L=PAUSE "',TRIM(log_event%place), &
	228	'" new=', mtime,' last=',log_event%mtime
[1318]	229	CALL message( 'cpu_log', 'PA0176', 0, 1, -1, 6, 0 )
	230	first = .FALSE.
	231	ENDIF
	232	log_event%isum = log_event%isum + mtime - log_event%mtime
	233	log_event%ivect = log_event%ivect + mtimevec - log_event%mtimevec
	234	ELSEIF ( modus == 'stop' ) THEN
[4015]	235	IF ( ( mtime - log_event%mtime + log_event%isum ) < 0.0 .AND. first ) THEN
	236	WRITE( message_string, * ) 'negative time interval occured', &
	237	'&PE',myid,' L=STOP "',TRIM(log_event%place),'" new=', &
	238	mtime,' last=',log_event%mtime,' isum=',log_event%isum
[1318]	239	CALL message( 'cpu_log', 'PA0177', 0, 1, -1, 6, 0 )
	240	first = .FALSE.
	241	ENDIF
	242	log_event%mtime = mtime - log_event%mtime + log_event%isum
	243	log_event%mtimevec = mtimevec - log_event%mtimevec + log_event%ivect
	244	log_event%sum = log_event%sum + log_event%mtime
	245	IF ( log_event%sum < 0.0 .AND. first ) THEN
[4015]	246	WRITE( message_string, * ) 'negative time interval occured', &
	247	'&PE',myid,' L=STOP "',TRIM(log_event%place),'" sum=', &
	248	log_event%sum,' mtime=',log_event%mtime
[1318]	249	CALL message( 'cpu_log', 'PA0178', 0, 1, -1, 6, 0 )
	250	first = .FALSE.
	251	ENDIF
	252	log_event%vector = log_event%vector + log_event%mtimevec
	253	log_event%counts = log_event%counts + 1
[4015]	254	log_event%isum = 0.0_dp
	255	log_event%ivect = 0.0_dp
[1318]	256	ELSE
[4015]	257	message_string = 'unknown modus of time measurement: ' // TRIM( modus )
[1318]	258	CALL message( 'cpu_log', 'PA0179', 0, 1, -1, 6, 0 )
[1]	259	ENDIF
[1318]	260
	261	END SUBROUTINE cpu_log
	262
	263
	264	!------------------------------------------------------------------------------!
	265	! Description:
	266	! ------------
[1682]	267	!> Analysis and output of the cpu-times measured. All PE results are collected
	268	!> on PE0 in order to calculate the mean cpu-time over all PEs and other
	269	!> statistics. The output is sorted according to the amount of cpu-time consumed
	270	!> and output on PE0.
[1318]	271	!------------------------------------------------------------------------------!
[1682]	272
	273	SUBROUTINE cpu_statistics
[1318]	274
	275	IMPLICIT NONE
	276
[1682]	277	INTEGER(iwp) :: i !<
	278	INTEGER(iwp) :: ii(1) !<
[4429]	279	#if defined( __parallel )
[1682]	280	INTEGER(iwp) :: iii !<
[4429]	281	INTEGER(iwp) :: sender !<
	282	#endif
[4015]	283	REAL(dp) :: average_cputime !<
	284	REAL(dp), SAVE :: norm = 1.0_dp !<
[4549]	285	REAL(dp), DIMENSION(:), ALLOCATABLE :: pe_max !<
	286	REAL(dp), DIMENSION(:), ALLOCATABLE :: pe_max_s !<
	287	REAL(dp), DIMENSION(:), ALLOCATABLE :: pe_min !<
	288	REAL(dp), DIMENSION(:), ALLOCATABLE :: pe_min_s !<
	289	REAL(dp), DIMENSION(:), ALLOCATABLE :: pe_rms !<
	290	REAL(dp), DIMENSION(:), ALLOCATABLE :: pe_rms_s !<
	291	REAL(dp), DIMENSION(:), ALLOCATABLE :: pe_tmp !<
	292	REAL(dp), DIMENSION(:), ALLOCATABLE :: pe_tmp_s !<
	293	REAL(dp), DIMENSION(:), ALLOCATABLE :: sum !<
	294	REAL(dp), DIMENSION(:), ALLOCATABLE :: sum_s !<
	295	REAL(dp), DIMENSION(:,:), ALLOCATABLE :: pe_log_points !<
	296	REAL(dp), DIMENSION(:,:), ALLOCATABLE :: pe_log_points_s !<
[1318]	297
	298
[3885]	299	CALL location_message( 'calculating cpu statistics', 'start' )
[1402]	300
[1318]	301	!
[4539]	302	!-- Compute CPU-times in seconds for the global non-overlapping measurements.
[1318]	303	log_point%mtime = log_point%mtime / norm
	304	log_point%sum = log_point%sum / norm
	305	log_point%vector = log_point%vector / norm
	306	WHERE ( log_point%counts /= 0 )
	307	log_point%mean = log_point%sum / log_point%counts
	308	END WHERE
	309
	310
	311	!
[4539]	312	!-- Collect CPU-times from all PEs and calculate statistics
[1318]	313	IF ( myid == 0 ) THEN
	314	!
	315	!-- Allocate and initialize temporary arrays needed for statistics
[4015]	316	ALLOCATE( pe_max( SIZE( log_point ) ), pe_min( SIZE( log_point ) ), &
	317	pe_rms( SIZE( log_point ) ), pe_tmp( SIZE( log_point ) ), &
[1318]	318	pe_log_points( SIZE( log_point ), 0:numprocs-1 ) )
	319	pe_min = log_point%sum
	320	pe_max = log_point%sum ! need to be set in case of 1 PE
[4015]	321	pe_rms = 0.0_dp
	322	pe_tmp = 0.0_dp
[1318]	323
	324	#if defined( __parallel )
	325	!
	326	!-- Receive data from all PEs
	327	DO i = 1, numprocs-1
[4015]	328	CALL MPI_RECV( pe_tmp(1), SIZE( log_point ), MPI_DOUBLE_PRECISION, i, i, comm2d, &
	329	status, ierr )
[1318]	330	sender = status(MPI_SOURCE)
[3229]	331	pe_log_points(:,sender) = pe_tmp
[1318]	332	ENDDO
	333	pe_log_points(:,0) = log_point%sum ! Results from PE0
	334	!
	335	!-- Calculate mean of all PEs, store it on log_point%sum
	336	!-- and find minimum and maximum
	337	DO iii = 1, SIZE( log_point )
	338	DO i = 1, numprocs-1
	339	log_point(iii)%sum = log_point(iii)%sum + pe_log_points(iii,i)
	340	pe_min(iii) = MIN( pe_min(iii), pe_log_points(iii,i) )
	341	pe_max(iii) = MAX( pe_max(iii), pe_log_points(iii,i) )
	342	ENDDO
	343	log_point(iii)%sum = log_point(iii)%sum / numprocs
	344	!
	345	!-- Calculate rms
	346	DO i = 0, numprocs-1
[4015]	347	pe_rms(iii) = pe_rms(iii) + ( pe_log_points(iii,i) - log_point(iii)%sum )**2
[1318]	348	ENDDO
	349	pe_rms(iii) = SQRT( pe_rms(iii) / numprocs )
	350	ENDDO
	351	ELSE
	352	!
	353	!-- Send data to PE0 (pe_max is used as temporary storage to send
	354	!-- the data in order to avoid sending the data type log)
	355	ALLOCATE( pe_max( SIZE( log_point ) ) )
	356	pe_max = log_point%sum
[4015]	357	CALL MPI_SEND( pe_max(1), SIZE( log_point ), MPI_DOUBLE_PRECISION, 0, myid, comm2d, ierr )
[1318]	358	#endif
	359
[1]	360	ENDIF
[1318]	361
	362	!
[4539]	363	!-- The same procedure again for the special measurements.
[1318]	364	!
	365	!-- Compute cpu-times in seconds
	366	log_point_s%mtime = log_point_s%mtime / norm
	367	log_point_s%sum = log_point_s%sum / norm
	368	log_point_s%vector = log_point_s%vector / norm
	369	WHERE ( log_point_s%counts /= 0 )
	370	log_point_s%mean = log_point_s%sum / log_point_s%counts
	371	END WHERE
	372
	373	!
[4539]	374	!-- Collect CPU-times from all PEs and calculate statistics
[1318]	375	#if defined( __parallel )
	376	!
	377	!-- Set barrier in order to avoid that PE0 receives log_point_s-data
	378	!-- while still busy with receiving log_point-data (see above)
	379	CALL MPI_BARRIER( comm2d, ierr )
	380	#endif
	381	IF ( myid == 0 ) THEN
	382	!
[4549]	383	!-- Allocate and initialize temporary arrays needed for statistics
	384	ALLOCATE( pe_max_s( SIZE( log_point_s ) ), pe_min_s( SIZE( log_point_s ) ), &
	385	pe_rms_s( SIZE( log_point_s ) ), pe_tmp_s( SIZE( log_point_s ) ), &
	386	pe_log_points_s( SIZE( log_point_s ), 0:numprocs-1 ) )
	387	pe_min_s = log_point_s%sum
	388	pe_max_s = log_point_s%sum ! need to be set in case of 1 PE
	389	pe_rms_s = 0.0_dp
[1318]	390
	391	#if defined( __parallel )
	392	!
	393	!-- Receive data from all PEs
	394	DO i = 1, numprocs-1
[4549]	395	CALL MPI_RECV( pe_tmp_s(1), SIZE( log_point_s ), MPI_DOUBLE_PRECISION, &
	396	MPI_ANY_SOURCE, MPI_ANY_TAG, comm2d, status, ierr )
[1318]	397	sender = status(MPI_SOURCE)
[4549]	398	pe_log_points_s(:,sender) = pe_tmp_s
[1318]	399	ENDDO
[4549]	400	pe_log_points_s(:,0) = log_point_s%sum ! Results from PE0
[1318]	401	!
	402	!-- Calculate mean of all PEs, store it on log_point_s%sum
	403	!-- and find minimum and maximum
[4549]	404	DO iii = 1, SIZE( log_point_s )
[1318]	405	DO i = 1, numprocs-1
[4549]	406	log_point_s(iii)%sum = log_point_s(iii)%sum + pe_log_points_s(iii,i)
	407	pe_min_s(iii) = MIN( pe_min_s(iii), pe_log_points_s(iii,i) )
	408	pe_max_s(iii) = MAX( pe_max_s(iii), pe_log_points_s(iii,i) )
[1318]	409	ENDDO
	410	log_point_s(iii)%sum = log_point_s(iii)%sum / numprocs
	411	!
	412	!-- Calculate rms
	413	DO i = 0, numprocs-1
[4549]	414	pe_rms_s(iii) = pe_rms_s(iii) + ( pe_log_points_s(iii,i) - log_point_s(iii)%sum )**2
[1318]	415	ENDDO
[4549]	416	pe_rms_s(iii) = SQRT( pe_rms_s(iii) / numprocs )
[1318]	417	ENDDO
	418	ELSE
	419	!
	420	!-- Send data to PE0 (pe_max is used as temporary storage to send
	421	!-- the data in order to avoid sending the data type log)
[4549]	422	ALLOCATE( pe_max_s( SIZE( log_point_s ) ) )
	423	pe_max_s = log_point_s%sum
	424	CALL MPI_SEND( pe_max_s(1), SIZE( log_point_s ), MPI_DOUBLE_PRECISION, 0, 0, comm2d, &
	425	ierr )
[1318]	426	#endif
	427
	428	ENDIF
[4539]	429	!
	430	!-- Write CPU-times for the non-overlapping measurements.
	431	IF ( myid == 0 ) THEN
	432	!
	433	!-- Re-store sums
	434	ALLOCATE( sum( SIZE( log_point ) ) )
	435	WHERE ( log_point%counts /= 0 )
	436	sum = log_point%sum
	437	ELSEWHERE
	438	sum = -1.0_dp
	439	ENDWHERE
[1318]	440
	441	!
[4539]	442	!-- Get total time in order to calculate CPU-time per gridpoint and timestep.
	443	!-- Time for initialization (2) and spinup (41) are not included here!
	444	IF ( nr_timesteps_this_run /= 0 ) THEN
	445	average_cputime = log_point_s(10)%sum / REAL( ngp_3d(0), KIND=dp ) / &
	446	REAL( nr_timesteps_this_run, KIND=dp ) * 1E6_dp ! in micro-sec
	447	ELSE
	448	average_cputime = -1.0_dp
	449	ENDIF
	450
	451	!
	452	!-- Write cpu-times sorted by size
	453	CALL check_open( 18 )
	454	#if defined( __parallel )
	455	WRITE ( 18, 100 ) TRIM( run_description_header ), numprocs * threads_per_task, &
	456	pdims(1), pdims(2), threads_per_task, nx+1, ny+1, nz, &
	457	nr_timesteps_this_run, average_cputime
	458
	459	WRITE ( 18, 110 )
	460	#else
	461	WRITE ( 18, 100 ) TRIM( run_description_header ), numprocs * threads_per_task, 1, 1, &
	462	threads_per_task, nx+1, ny+1, nz, nr_timesteps_this_run, &
	463	average_cputime
	464
	465	WRITE ( 18, 110 )
	466	#endif
	467	DO
	468	ii = MAXLOC( sum )
	469	i = ii(1)
	470	IF ( sum(i) /= -1.0_dp ) THEN
	471	WRITE ( 18, 102 ) log_point(i)%place, log_point(i)%sum, &
	472	log_point(i)%sum / log_point(1)%sum * 100.0_dp, &
	473	log_point(i)%counts, pe_min(i), pe_max(i), pe_rms(i)
	474	sum(i) = -1.0_dp
	475	ELSE
	476	EXIT
	477	ENDIF
	478	ENDDO
	479	ENDIF
	480
	481	!
	482	!-- Write CPU-times for special measurements.
[1318]	483	IF ( myid == 0 ) THEN
	484	!
	485	!-- Re-store sums
[4549]	486	ALLOCATE( sum_s( SIZE( log_point_s ) ) )
[1318]	487	WHERE ( log_point_s%counts /= 0 )
[4549]	488	sum_s = log_point_s%sum
[1318]	489	ELSEWHERE
[4549]	490	sum_s = -1.0_dp
[1318]	491	ENDWHERE
	492
	493	!
	494	!-- Write cpu-times sorted by size
	495	WRITE ( 18, 101 )
	496	DO
[4549]	497	ii = MAXLOC( sum_s )
[1318]	498	i = ii(1)
[4549]	499	IF ( sum_s(i) /= -1.0_dp ) THEN
[4015]	500	WRITE ( 18, 102 ) log_point_s(i)%place, log_point_s(i)%sum, &
	501	log_point_s(i)%sum / log_point(1)%sum * 100.0_dp, &
[4549]	502	log_point_s(i)%counts, pe_min_s(i), pe_max_s(i), pe_rms_s(i)
	503	sum_s(i) = -1.0_dp
[1318]	504	ELSE
	505	EXIT
	506	ENDIF
	507	ENDDO
	508
	509	!
	510	!-- Output of handling of MPI operations
	511	IF ( collective_wait ) THEN
	512	WRITE ( 18, 103 )
	513	ELSE
	514	WRITE ( 18, 104 )
	515	ENDIF
	516	IF ( cpu_log_barrierwait ) WRITE ( 18, 111 )
	517	IF ( synchronous_exchange ) THEN
	518	WRITE ( 18, 105 )
	519	ELSE
	520	WRITE ( 18, 106 )
	521	ENDIF
	522	!
[4536]	523	!-- Output of restart data transfer speed
	524	IF ( write_binary .AND. restart_data_format_output(1:3) == 'mpi' ) THEN
	525	WRITE ( 18, 107 ) restart_file_size, restart_file_size / log_point(22)%sum
	526	ENDIF
	527	!
	528	!-- Empty lines in order to create a gap to the results from the next restart run
	529	WRITE ( 18, 108 )
[1318]	530
	531	!
	532	!-- Unit 18 is not needed anymore
	533	CALL close_file( 18 )
	534
	535	ENDIF
	536
[3885]	537	CALL location_message( 'calculating cpu statistics', 'finished' )
[1318]	538
[3885]	539
[4015]	540	100 FORMAT (A/11('-')//'CPU measures for ',I5,' PEs (',I5,'(x) * ',I5,'(y', &
	541	&') tasks *',I5,' threads):'// &
	542	'gridpoints (x/y/z): ',20X,I5,' * ',I5,' * ',I5/ &
	543	'nr of timesteps: ',22X,I6/ &
[1318]	544	'cpu time per grid point and timestep: ',5X,F8.5,' * 10**-6 s')
	545
	546	101 FORMAT (/'special measures:'/ &
[4015]	547	&'-----------------------------------------------------------', &
[3483]	548	&'---------------------')
[1318]	549
[4378]	550	102 FORMAT (A25,2X,F9.3,2X,F7.2,1X,I7,2(1X,F9.3),1X,F6.2)
[1318]	551	103 FORMAT (/'Barriers are set in front of collective operations')
	552	104 FORMAT (/'No barriers are set in front of collective operations')
	553	105 FORMAT (/'Exchange of ghostpoints via MPI_SENDRCV')
	554	106 FORMAT (/'Exchange of ghostpoints via MPI_ISEND/MPI_IRECV')
[4536]	555	107 FORMAT (/'Restart file size: ',F12.1,' MByte'/ &
	556	&'I/O transfer speed: ',F12.1,' MByte / sec')
	557	108 FORMAT (//)
[4015]	558	110 FORMAT ('------------------------------------------------------------', &
	559	&'----------'// &
	560	&'place: mean counts ', &
	561	&' min max rms'/ &
	562	&' sec. % ', &
	563	&'sec. sec. sec.'/ &
	564	&'-----------------------------------------------------------', &
[3483]	565	&'---------------------')
[1318]	566	111 FORMAT (/'Barriers are set at beginning (start/continue) of measurements')
	567
	568	END SUBROUTINE cpu_statistics
	569
	570	END MODULE cpulog

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |