Home

Context Navigation

source: palm/trunk/SOURCE/cpulog_mod.f90 @ 3545

Last change on this file since 3545 was 3483, checked in by raasch, 6 years ago
bugfix: misplaced positions of cpp-directives for netCDF and MPI fixed; output format limited to a maximum line length of 80
Property svn:keywords set to `Id`
File size: 22.5 KB

Rev	Line
[1850]	1	!> @file cpulog_mod.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2718]	17	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[1403]	22	!
[3049]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: cpulog_mod.f90 3483 2018-11-02 14:19:26Z gronemeier $
[3483]	27	! output format limited to a maximum line length of 80
	28	!
	29	! 3229 2018-09-04 15:05:36Z sward
[3229]	30	! Bugfix in maximum time spent per log point: PE 0 was beeing ignored.
	31	!
	32	! 3049 2018-05-29 13:52:36Z Giersch
[3045]	33	! Error messages revised
	34	!
[3049]	35	! 3045 2018-05-28 07:55:41Z Giersch
	36	! Error messages revised
	37	!
[3045]	38	! 3028 2018-05-23 10:27:23Z knoop
[2932]	39	! renamed d3par to runtime_parameters
	40	!
	41	! 2718 2018-01-02 08:49:38Z maronga
[2716]	42	! Corrected "Former revisions" section
	43	!
	44	! 2696 2017-12-14 17:12:51Z kanani
	45	! Change in file header (GPL part)
	46	!
	47	! 2266 2017-06-09 09:27:21Z raasch
[2266]	48	! bugfix: cpu-time per grid point is now calculated using ngp_3d in order to
	49	! avoid integer overflow,
	50	! some re-formatting
	51	!
	52	! 2119 2017-01-17 16:51:50Z raasch
[1321]	53	!
[2119]	54	! 2118 2017-01-17 16:38:49Z raasch
	55	! OpenACC relevant code removed
	56	!
[2001]	57	! 2000 2016-08-20 18:09:15Z knoop
	58	! Forced header and separation lines into 80 columns
	59	!
[1932]	60	! 1931 2016-06-10 12:06:59Z suehring
	61	! Adjustment in character length and format statement
	62	!
[1851]	63	! 1850 2016-04-08 13:29:27Z maronga
	64	! Module renamed
	65	!
	66	!
[1809]	67	! 1808 2016-04-05 19:44:00Z raasch
	68	! cpu measurements are done with standard FORTRAN routine on every machine
	69	!
[1683]	70	! 1682 2015-10-07 23:56:08Z knoop
	71	! Code annotations made doxygen readable
	72	!
[1403]	73	! 1402 2014-05-09 14:25:13Z raasch
	74	! location messages added
	75	!
[1370]	76	! 1369 2014-04-24 05:57:38Z raasch
	77	! routine description added
	78	!
[1354]	79	! 1353 2014-04-08 15:21:23Z heinze
	80	! REAL constants provided with KIND-attribute
	81	!
[1323]	82	! 1322 2014-03-20 16:38:49Z raasch
	83	! REAL functions provided with KIND-attribute
	84	!
[1321]	85	! 1320 2014-03-20 08:40:49Z raasch
[1320]	86	! ONLY-attribute added to USE-statements,
	87	! kind-parameters added to all INTEGER and REAL declaration statements,
	88	! kinds are defined in new module kinds,
	89	! revision history before 2012 removed,
	90	! comment fields (!:) to be used for variable explanations added to
	91	! all variable declaration statements
[1321]	92	!
[1319]	93	! 1318 2014-03-17 13:35:16Z raasch
	94	! former files/routines cpu_log and cpu_statistics combined to one module,
	95	! which also includes the former data module cpulog from the modules-file
	96	!
[1037]	97	! 1036 2012-10-22 13:43:42Z raasch
	98	! code put under GPL (PALM 3.9)
	99	!
[1]	100	! Revision 1.1 1997/07/24 11:12:29 raasch
	101	! Initial revision
	102	!
	103	!
	104	! Description:
	105	! ------------
[1682]	106	!> CPU-time measurements for any program part whatever. Results of the
	107	!> measurements are output at the end of the run in local file CPU_MEASURES.
	108	!>
	109	!> To measure the CPU-time (better to say the wallclock time) of a specific code
	110	!> segment, two calls of cpu_log have to be used as brackets in front and at the
	111	!> end of the segment:
	112	!>
	113	!> CALL cpu_log( log_point(n), 'any identifier', 'start' )
	114	!> ... code segment ...
	115	!> CALL cpu_log( log_point(n), 'any identifier', 'stop' )
	116	!>
	117	!> Parts of the code segment can be excluded from the measurement by additional
	118	!> call of cpu_log:
	119	!>
	120	!> ... first segment to be measured
	121	!> CALL cpu_log( log_point(n), 'any identifier', 'pause' )
	122	!> ... oart of segment to be excluded from measurement
	123	!> CALL cpu_log( log_point(n), 'any identifier', 'continue' )
	124	!> ... second segment to be mesasured
	125	!>
	126	!> n is an INTEGER within the interval [1,100] defining the id of the specific
	127	!> code segment, 'any identifier' is a string describing the code segment to be
	128	!> measured. It can be freely chosen and results will appear under this name in
	129	!> file CPU_MEASURES. ids can only be used once. If you like to do a
	130	!> measurement of a new part of the code, please look for an id which is unused
	131	!> ao far.
	132	!>
[2932]	133	!> runtime_parameters-parameter cpu_log_barrierwait can be used to set an MPI
	134	!> barrier at the beginning of the measurement (modus 'start' or 'continue'),
	135	!> to avoid that idle times (due to MPI calls in the code segment, which are
[1682]	136	!> waiting for other processes to be finished) affect the measurements.
	137	!> If barriers shall not be used at all, a fourth, optional parameter has to be
	138	!> given:
	139	!>
	140	!> CALL cpu_log( ..., ..., 'start', cpu_log_nowait )
	141	!>
	142	!> Variable log_point should be used for non-overlapping code segments, and they
	143	!> should sum up to the total cpu-time required by the complete run.
	144	!> Variable log_point_s can be used for any other special (s) measurements.
[3]	145	!------------------------------------------------------------------------------!
[1682]	146	MODULE cpulog
	147
[1]	148
[1320]	149	USE control_parameters, &
	150	ONLY: message_string, nr_timesteps_this_run, run_description_header, &
	151	synchronous_exchange
	152
	153	USE indices, &
[2266]	154	ONLY: ngp_3d, nx, ny, nz
[1320]	155
	156	USE kinds
	157
[1]	158	USE pegrid
	159
	160	IMPLICIT NONE
	161
[1318]	162	PRIVATE
[1320]	163	PUBLIC cpu_log, cpu_log_barrierwait, cpu_log_nowait, cpu_statistics, &
[1318]	164	initial_wallclock_time, log_point, log_point_s
[1]	165
[1318]	166	INTERFACE cpu_log
	167	MODULE PROCEDURE cpu_log
	168	END INTERFACE cpu_log
	169
	170	INTERFACE cpu_statistics
	171	MODULE PROCEDURE cpu_statistics
	172	END INTERFACE cpu_statistics
	173
[1682]	174	INTEGER(iwp), PARAMETER :: cpu_log_continue = 0 !<
	175	INTEGER(iwp), PARAMETER :: cpu_log_pause = 1 !<
	176	INTEGER(iwp), PARAMETER :: cpu_log_start = 2 !<
	177	INTEGER(iwp), PARAMETER :: cpu_log_stop = 3 !<
[1318]	178
[1682]	179	LOGICAL :: cpu_log_barrierwait = .FALSE. !<
	180	LOGICAL, PARAMETER :: cpu_log_nowait = .FALSE. !<
[1318]	181
[1682]	182	REAL(wp) :: initial_wallclock_time !<
[1318]	183
	184	TYPE logpoint
[1682]	185	REAL(wp) :: isum !<
	186	REAL(wp) :: ivect !<
	187	REAL(wp) :: mean !<
	188	REAL(wp) :: mtime !<
	189	REAL(wp) :: mtimevec !<
	190	REAL(wp) :: sum !<
	191	REAL(wp) :: vector !<
	192	INTEGER(iwp) :: counts !<
[1931]	193	CHARACTER (LEN=25) :: place !<
[1318]	194	END TYPE logpoint
	195
[1353]	196	TYPE(logpoint), DIMENSION(100) :: log_point = logpoint( 0.0_wp, 0.0_wp, &
	197	0.0_wp, 0.0_wp, 0.0_wp, 0.0_wp, 0.0_wp, &
[3028]	198	0, ' ' )
	199	TYPE(logpoint), DIMENSION(100) :: log_point_s = logpoint( 0.0_wp, 0.0_wp, &
[1353]	200	0.0_wp, 0.0_wp, 0.0_wp, 0.0_wp, 0.0_wp, &
	201	0, ' ' )
[1318]	202
	203	SAVE
	204
	205	CONTAINS
	206
[1682]	207	!------------------------------------------------------------------------------!
	208	! Description:
	209	! ------------
	210	!> @todo Missing subroutine description.
	211	!------------------------------------------------------------------------------!
[1318]	212	SUBROUTINE cpu_log( log_event, place, modus, barrierwait )
	213
	214	IMPLICIT NONE
	215
[1682]	216	CHARACTER (LEN=*) :: modus !<
	217	CHARACTER (LEN=*) :: place !<
[1320]	218
[1682]	219	LOGICAL :: wait_allowed !<
	220	LOGICAL, OPTIONAL :: barrierwait !<
	221	LOGICAL, SAVE :: first = .TRUE. !<
[1320]	222
[1682]	223	REAL(wp) :: mtime = 0.0_wp !<
	224	REAL(wp) :: mtimevec = 0.0_wp !<
	225	TYPE(logpoint) :: log_event !<
[1318]	226
[1682]	227	INTEGER(idp) :: count !<
	228	INTEGER(idp) :: count_rate !<
[1]	229
	230
	231	!
[1318]	232	!-- Initialize and check, respectively, point of measurement
	233	IF ( log_event%place == ' ' ) THEN
	234	log_event%place = place
	235	ELSEIF ( log_event%place /= place ) THEN
[3045]	236	WRITE( message_string, * ) 'wrong argument expected: ', &
	237	TRIM(log_event%place), ' given: ', TRIM( place )
[1318]	238	CALL message( 'cpu_log', 'PA0174', 1, 2, 0, 6, 0 )
	239	ENDIF
[1]	240
	241	!
[1318]	242	!-- Determine, if barriers are allowed to set
	243	IF ( PRESENT( barrierwait ) ) THEN
	244	wait_allowed = barrierwait
	245	ELSE
	246	wait_allowed = .TRUE.
	247	ENDIF
	248
	249	!
	250	!-- MPI barrier, if requested, in order to avoid measuring wait times
	251	!-- caused by MPI routines waiting for other MPI routines of other
	252	!-- PEs that have not yet finished
	253	#if defined( __parallel )
[1320]	254	IF ( cpu_log_barrierwait .AND. wait_allowed .AND. &
[1318]	255	( modus == 'start' .OR. modus == 'continue' ) ) THEN
	256	CALL MPI_BARRIER( comm2d, ierr )
	257	ENDIF
	258	#endif
	259
	260	!
	261	!-- Take current time
	262	CALL SYSTEM_CLOCK( count, count_rate )
[1322]	263	mtime = REAL( count, KIND=wp ) / REAL( count_rate, KIND=wp )
[1]	264
	265	!
[1318]	266	!-- Start, stop or pause measurement
	267	IF ( modus == 'start' .OR. modus == 'continue' ) THEN
	268	log_event%mtime = mtime
	269	log_event%mtimevec = mtimevec
	270	ELSEIF ( modus == 'pause' ) THEN
	271	IF ( ( mtime - log_event%mtime ) < 0.0 .AND. first ) THEN
[1320]	272	WRITE( message_string, * ) 'negative time interval occured', &
[3046]	273	'&PE',myid,' L=PAUSE "',TRIM(log_event%place), &
[1320]	274	'" new=', mtime,' last=',log_event%mtime
[1318]	275	CALL message( 'cpu_log', 'PA0176', 0, 1, -1, 6, 0 )
	276	first = .FALSE.
	277	ENDIF
	278	log_event%isum = log_event%isum + mtime - log_event%mtime
	279	log_event%ivect = log_event%ivect + mtimevec - log_event%mtimevec
	280	ELSEIF ( modus == 'stop' ) THEN
[1320]	281	IF ( ( mtime - log_event%mtime + log_event%isum ) < 0.0 .AND. &
[1318]	282	first ) THEN
[1320]	283	WRITE( message_string, * ) 'negative time interval occured', &
[3046]	284	'&PE',myid,' L=STOP "',TRIM(log_event%place),'" new=', &
[2266]	285	mtime,' last=',log_event%mtime,' isum=',log_event%isum
[1318]	286	CALL message( 'cpu_log', 'PA0177', 0, 1, -1, 6, 0 )
	287	first = .FALSE.
	288	ENDIF
	289	log_event%mtime = mtime - log_event%mtime + log_event%isum
	290	log_event%mtimevec = mtimevec - log_event%mtimevec + log_event%ivect
	291	log_event%sum = log_event%sum + log_event%mtime
	292	IF ( log_event%sum < 0.0 .AND. first ) THEN
[1320]	293	WRITE( message_string, * ) 'negative time interval occured', &
[3046]	294	'&PE',myid,' L=STOP "',TRIM(log_event%place),'" sum=', &
[2266]	295	log_event%sum,' mtime=',log_event%mtime
[1318]	296	CALL message( 'cpu_log', 'PA0178', 0, 1, -1, 6, 0 )
	297	first = .FALSE.
	298	ENDIF
	299	log_event%vector = log_event%vector + log_event%mtimevec
	300	log_event%counts = log_event%counts + 1
[1353]	301	log_event%isum = 0.0_wp
	302	log_event%ivect = 0.0_wp
[1318]	303	ELSE
[2266]	304	message_string = 'unknown modus of time measurement: ' // &
	305	TRIM( modus )
[1318]	306	CALL message( 'cpu_log', 'PA0179', 0, 1, -1, 6, 0 )
[1]	307	ENDIF
[1318]	308
	309	END SUBROUTINE cpu_log
	310
	311
	312	!------------------------------------------------------------------------------!
	313	! Description:
	314	! ------------
[1682]	315	!> Analysis and output of the cpu-times measured. All PE results are collected
	316	!> on PE0 in order to calculate the mean cpu-time over all PEs and other
	317	!> statistics. The output is sorted according to the amount of cpu-time consumed
	318	!> and output on PE0.
[1318]	319	!------------------------------------------------------------------------------!
[1682]	320
	321	SUBROUTINE cpu_statistics
[1318]	322
	323	IMPLICIT NONE
	324
[1682]	325	INTEGER(iwp) :: i !<
	326	INTEGER(iwp) :: ii(1) !<
	327	INTEGER(iwp) :: iii !<
	328	INTEGER(iwp) :: sender !<
	329	REAL(wp) :: average_cputime !<
	330	REAL(wp), SAVE :: norm = 1.0_wp !<
	331	REAL(wp), DIMENSION(:), ALLOCATABLE :: pe_max !<
	332	REAL(wp), DIMENSION(:), ALLOCATABLE :: pe_min !<
	333	REAL(wp), DIMENSION(:), ALLOCATABLE :: pe_rms !<
[3229]	334	REAL(wp), DIMENSION(:), ALLOCATABLE :: pe_tmp !<
[1682]	335	REAL(wp), DIMENSION(:), ALLOCATABLE :: sum !<
	336	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: pe_log_points !<
[1318]	337
	338
[1402]	339	CALL location_message( 'calculating cpu statistics', .FALSE. )
	340
[1318]	341	!
	342	!-- Compute cpu-times in seconds
	343	log_point%mtime = log_point%mtime / norm
	344	log_point%sum = log_point%sum / norm
	345	log_point%vector = log_point%vector / norm
	346	WHERE ( log_point%counts /= 0 )
	347	log_point%mean = log_point%sum / log_point%counts
	348	END WHERE
	349
	350
	351	!
	352	!-- Collect cpu-times from all PEs and calculate statistics
	353	IF ( myid == 0 ) THEN
	354	!
	355	!-- Allocate and initialize temporary arrays needed for statistics
[1320]	356	ALLOCATE( pe_max( SIZE( log_point ) ), pe_min( SIZE( log_point ) ), &
[3229]	357	pe_rms( SIZE( log_point ) ), pe_tmp( SIZE( log_point ) ), &
[1318]	358	pe_log_points( SIZE( log_point ), 0:numprocs-1 ) )
	359	pe_min = log_point%sum
	360	pe_max = log_point%sum ! need to be set in case of 1 PE
[1353]	361	pe_rms = 0.0_wp
[3229]	362	pe_tmp = 0.0_wp
[1318]	363
	364	#if defined( __parallel )
	365	!
	366	!-- Receive data from all PEs
	367	DO i = 1, numprocs-1
[3229]	368	CALL MPI_RECV( pe_tmp(1), SIZE( log_point ), MPI_REAL, &
[1318]	369	i, i, comm2d, status, ierr )
	370	sender = status(MPI_SOURCE)
[3229]	371	pe_log_points(:,sender) = pe_tmp
[1318]	372	ENDDO
	373	pe_log_points(:,0) = log_point%sum ! Results from PE0
	374	!
	375	!-- Calculate mean of all PEs, store it on log_point%sum
	376	!-- and find minimum and maximum
	377	DO iii = 1, SIZE( log_point )
	378	DO i = 1, numprocs-1
	379	log_point(iii)%sum = log_point(iii)%sum + pe_log_points(iii,i)
	380	pe_min(iii) = MIN( pe_min(iii), pe_log_points(iii,i) )
	381	pe_max(iii) = MAX( pe_max(iii), pe_log_points(iii,i) )
	382	ENDDO
	383	log_point(iii)%sum = log_point(iii)%sum / numprocs
	384	!
	385	!-- Calculate rms
	386	DO i = 0, numprocs-1
[1320]	387	pe_rms(iii) = pe_rms(iii) + ( &
	388	pe_log_points(iii,i) - log_point(iii)%sum &
[1318]	389	)**2
	390	ENDDO
	391	pe_rms(iii) = SQRT( pe_rms(iii) / numprocs )
	392	ENDDO
	393	ELSE
	394	!
	395	!-- Send data to PE0 (pe_max is used as temporary storage to send
	396	!-- the data in order to avoid sending the data type log)
	397	ALLOCATE( pe_max( SIZE( log_point ) ) )
	398	pe_max = log_point%sum
[2266]	399	CALL MPI_SEND( pe_max(1), SIZE( log_point ), MPI_REAL, 0, myid, &
	400	comm2d, ierr )
[1318]	401	#endif
	402
[1]	403	ENDIF
[1318]	404
	405	!
	406	!-- Write cpu-times
	407	IF ( myid == 0 ) THEN
	408	!
	409	!-- Re-store sums
	410	ALLOCATE( sum( SIZE( log_point ) ) )
	411	WHERE ( log_point%counts /= 0 )
	412	sum = log_point%sum
	413	ELSEWHERE
[1353]	414	sum = -1.0_wp
[1318]	415	ENDWHERE
	416
	417	!
[2266]	418	!-- Get total time in order to calculate CPU-time per gridpoint and
	419	!-- timestep
[1318]	420	IF ( nr_timesteps_this_run /= 0 ) THEN
[2266]	421	average_cputime = log_point(1)%sum / REAL( ngp_3d(0), KIND=wp ) / &
	422	REAL( nr_timesteps_this_run, KIND=wp ) * 1E6_wp
	423	! in micro-sec
[1318]	424	ELSE
[1353]	425	average_cputime = -1.0_wp
[1318]	426	ENDIF
	427
	428	!
	429	!-- Write cpu-times sorted by size
	430	CALL check_open( 18 )
	431	#if defined( __parallel )
[2266]	432	WRITE ( 18, 100 ) TRIM( run_description_header ), &
	433	numprocs * threads_per_task, pdims(1), pdims(2), &
	434	threads_per_task, nx+1, ny+1, nz, &
	435	nr_timesteps_this_run, average_cputime
[1318]	436
	437	WRITE ( 18, 110 )
	438	#else
[2266]	439	WRITE ( 18, 100 ) TRIM( run_description_header ), &
	440	numprocs * threads_per_task, 1, 1, &
	441	threads_per_task, nx+1, ny+1, nz, &
	442	nr_timesteps_this_run, average_cputime
[1318]	443
	444	WRITE ( 18, 110 )
	445	#endif
	446	DO
	447	ii = MAXLOC( sum )
	448	i = ii(1)
[1353]	449	IF ( sum(i) /= -1.0_wp ) THEN
[1318]	450	WRITE ( 18, 102 ) &
[1353]	451	log_point(i)%place, log_point(i)%sum, &
	452	log_point(i)%sum / log_point(1)%sum * 100.0_wp, &
[1318]	453	log_point(i)%counts, pe_min(i), pe_max(i), pe_rms(i)
[1353]	454	sum(i) = -1.0_wp
[1318]	455	ELSE
	456	EXIT
	457	ENDIF
	458	ENDDO
[1]	459	ENDIF
	460
	461
[1318]	462	!
	463	!-- The same procedure again for the individual measurements.
	464	!
	465	!-- Compute cpu-times in seconds
	466	log_point_s%mtime = log_point_s%mtime / norm
	467	log_point_s%sum = log_point_s%sum / norm
	468	log_point_s%vector = log_point_s%vector / norm
	469	WHERE ( log_point_s%counts /= 0 )
	470	log_point_s%mean = log_point_s%sum / log_point_s%counts
	471	END WHERE
	472
	473	!
	474	!-- Collect cpu-times from all PEs and calculate statistics
	475	#if defined( __parallel )
	476	!
	477	!-- Set barrier in order to avoid that PE0 receives log_point_s-data
	478	!-- while still busy with receiving log_point-data (see above)
	479	CALL MPI_BARRIER( comm2d, ierr )
	480	#endif
	481	IF ( myid == 0 ) THEN
	482	!
	483	!-- Initialize temporary arrays needed for statistics
	484	pe_min = log_point_s%sum
	485	pe_max = log_point_s%sum ! need to be set in case of 1 PE
[1353]	486	pe_rms = 0.0_wp
[1318]	487
	488	#if defined( __parallel )
	489	!
	490	!-- Receive data from all PEs
	491	DO i = 1, numprocs-1
[3229]	492	CALL MPI_RECV( pe_tmp(1), SIZE( log_point ), MPI_REAL, &
[1318]	493	MPI_ANY_SOURCE, MPI_ANY_TAG, comm2d, status, ierr )
	494	sender = status(MPI_SOURCE)
[3229]	495	pe_log_points(:,sender) = pe_tmp
[1318]	496	ENDDO
	497	pe_log_points(:,0) = log_point_s%sum ! Results from PE0
	498	!
	499	!-- Calculate mean of all PEs, store it on log_point_s%sum
	500	!-- and find minimum and maximum
	501	DO iii = 1, SIZE( log_point )
	502	DO i = 1, numprocs-1
[2266]	503	log_point_s(iii)%sum = log_point_s(iii)%sum + &
	504	pe_log_points(iii,i)
[1318]	505	pe_min(iii) = MIN( pe_min(iii), pe_log_points(iii,i) )
	506	pe_max(iii) = MAX( pe_max(iii), pe_log_points(iii,i) )
	507	ENDDO
	508	log_point_s(iii)%sum = log_point_s(iii)%sum / numprocs
	509	!
	510	!-- Calculate rms
	511	DO i = 0, numprocs-1
[1353]	512	pe_rms(iii) = pe_rms(iii) + ( &
[2266]	513	pe_log_points(iii,i) - log_point_s(iii)%sum &
[1318]	514	)**2
	515	ENDDO
	516	pe_rms(iii) = SQRT( pe_rms(iii) / numprocs )
	517	ENDDO
	518	ELSE
	519	!
	520	!-- Send data to PE0 (pe_max is used as temporary storage to send
	521	!-- the data in order to avoid sending the data type log)
	522	pe_max = log_point_s%sum
	523	CALL MPI_SEND( pe_max(1), SIZE( log_point ), MPI_REAL, 0, 0, comm2d, &
	524	ierr )
	525	#endif
	526
	527	ENDIF
	528
	529	!
	530	!-- Write cpu-times
	531	IF ( myid == 0 ) THEN
	532	!
	533	!-- Re-store sums
	534	WHERE ( log_point_s%counts /= 0 )
	535	sum = log_point_s%sum
	536	ELSEWHERE
[1353]	537	sum = -1.0_wp
[1318]	538	ENDWHERE
	539
	540	!
	541	!-- Write cpu-times sorted by size
	542	WRITE ( 18, 101 )
	543	DO
	544	ii = MAXLOC( sum )
	545	i = ii(1)
[1353]	546	IF ( sum(i) /= -1.0_wp ) THEN
	547	WRITE ( 18, 102 ) &
	548	log_point_s(i)%place, log_point_s(i)%sum, &
	549	log_point_s(i)%sum / log_point(1)%sum * 100.0_wp, &
[1318]	550	log_point_s(i)%counts, pe_min(i), pe_max(i), pe_rms(i)
[1353]	551	sum(i) = -1.0_wp
[1318]	552	ELSE
	553	EXIT
	554	ENDIF
	555	ENDDO
	556
	557	!
	558	!-- Output of handling of MPI operations
	559	IF ( collective_wait ) THEN
	560	WRITE ( 18, 103 )
	561	ELSE
	562	WRITE ( 18, 104 )
	563	ENDIF
	564	IF ( cpu_log_barrierwait ) WRITE ( 18, 111 )
	565	IF ( synchronous_exchange ) THEN
	566	WRITE ( 18, 105 )
	567	ELSE
	568	WRITE ( 18, 106 )
	569	ENDIF
	570
	571	!
	572	!-- Empty lines in order to create a gap to the results of the model
	573	!-- continuation runs
	574	WRITE ( 18, 107 )
	575
	576	!
	577	!-- Unit 18 is not needed anymore
	578	CALL close_file( 18 )
	579
	580	ENDIF
	581
[1402]	582	CALL location_message( 'finished', .TRUE. )
[1318]	583
	584	100 FORMAT (A/11('-')//'CPU measures for ',I5,' PEs (',I5,'(x) * ',I5,'(y', &
	585	&') tasks *',I5,' threads):'// &
	586	'gridpoints (x/y/z): ',20X,I5,' * ',I5,' * ',I5/ &
	587	'nr of timesteps: ',22X,I6/ &
	588	'cpu time per grid point and timestep: ',5X,F8.5,' * 10**-6 s')
	589
	590	101 FORMAT (/'special measures:'/ &
	591	&'-----------------------------------------------------------', &
[3483]	592	&'---------------------')
[1318]	593
[3483]	594	102 FORMAT (A25,2X,F9.3,2X,F7.2,1X,I7,2(1X,F9.3),1X,F5.2)
[1318]	595	103 FORMAT (/'Barriers are set in front of collective operations')
	596	104 FORMAT (/'No barriers are set in front of collective operations')
	597	105 FORMAT (/'Exchange of ghostpoints via MPI_SENDRCV')
	598	106 FORMAT (/'Exchange of ghostpoints via MPI_ISEND/MPI_IRECV')
	599	107 FORMAT (//)
[3483]	600	110 FORMAT ('------------------------------------------------------------', &
	601	&'----------'// &
	602	&'place: mean counts ', &
	603	&' min max rms'/ &
	604	&' sec. % ', &
	605	&'sec. sec. sec.'/ &
	606	&'-----------------------------------------------------------', &
	607	&'---------------------')
[1318]	608	111 FORMAT (/'Barriers are set at beginning (start/continue) of measurements')
	609
	610	END SUBROUTINE cpu_statistics
	611
	612	END MODULE cpulog

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |