Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 626

Last change on this file since 626 was 601, checked in by raasch, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 122.6 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: check_parameters.f90 601 2010-11-24 16:42:38Z suehring $
11	!
12	! 600 2010-11-24 16:10:51Z raasch
13	! change due to new default value of surface_waterflux
14	!
15	! 580 2010-10-05 13:59:11Z heinze
16	! renaming of ws_vertical_gradient_level to subs_vertical_gradient_level
17	!
18	! 567 2010-10-01 10:46:30Z helmke
19	! calculating masks changed
20	!
21	! 564 2010-09-30 13:18:59Z helmke
22	! palm message identifiers of masked output changed, 20 replaced by max_masks
23	!
24	! 553 2010-09-01 14:09:06Z weinreis
25	! masks is calculated and removed from inipar
26	!
27	! 531 2010-04-21 06:47:21Z heinze
28	! Bugfix: unit of hyp changed to dbar
29	!
30	! 524 2010-03-30 02:04:51Z raasch
31	! Bugfix: "/" in netcdf profile variable names replaced by ":"
32	!
33	! 493 2010-03-01 08:30:24Z raasch
34	! netcdf_data_format is checked
35	!
36	! 411 2009-12-11 14:15:58Z heinze
37	! Enabled passive scalar/humidity wall fluxes for non-flat topography
38	! Initialization of large scale vertical motion (subsidence/ascent)
39	!
40	! 410 2009-12-04 17:05:40Z letzel
41	! masked data output
42	!
43	! 388 2009-09-23 09:40:33Z raasch
44	! Check profiles fpr prho and hyp.
45	! Bugfix: output of averaged 2d/3d quantities requires that an avaraging
46	! interval has been set, respective error message is included
47	! bc_lr_cyc and bc_ns_cyc are set,
48	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
49	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
50	! Coupling with independent precursor runs.
51	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
52	! Bugfix: pressure included for profile output
53	! Check pressure gradient conditions
54	! topography_grid_convention moved from user_check_parameters
55	! 'single_street_canyon'
56	! Added shf* and qsws* to the list of available output data
57	!
58	! 222 2009-01-12 16:04:16Z letzel
59	! +user_check_parameters
60	! Output of messages replaced by message handling routine.
61	! Implementation of an MPI-1 coupling: replaced myid with target_id,
62	! deleted __mpi2 directives
63	! Check that PALM is called with mrun -K parallel for coupling
64	!
65	! 197 2008-09-16 15:29:03Z raasch
66	! Bug fix: Construction of vertical profiles when 10 gradients have been
67	! specified in the parameter list (ug, vg, pt, q, sa, lad)
68	!
69	! Strict grid matching along z is not needed for mg-solver.
70	! Leaf area density (LAD) explicitly set to its surface value at k=0
71	! Case of reading data for recycling included in initializing_actions,
72	! check of turbulent_inflow and calculation of recycling_plane.
73	! q*2 profile added
74	!
75	! 138 2007-11-28 10:03:58Z letzel
76	! Plant canopy added
77	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
78	! Multigrid solver allows topography, checking of dt_sort_particles
79	! Bugfix: initializing u_init and v_init in case of ocean runs
80	!
81	! 109 2007-08-28 15:26:47Z letzel
82	! Check coupling_mode and set default (obligatory) values (like boundary
83	! conditions for temperature and fluxes) in case of coupled runs.
84	! +profiles for wp and w"e
85	! Bugfix: Error message concerning output of particle concentration (pc)
86	! modified
87	! More checks and more default values for coupled runs
88	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
89	! cloud_physics = .T.)
90	! Rayleigh damping for ocean fixed.
91	! Check and, if necessary, set default value for dt_coupling
92	!
93	! 97 2007-06-21 08:23:15Z raasch
94	! Initial salinity profile is calculated, salinity boundary conditions are
95	! checked,
96	! z_max_do1d is checked only in case of ocean = .f.,
97	! +initial temperature and geostrophic velocity profiles for the ocean version,
98	! use_pt_reference renamed use_reference
99	!
100	! 89 2007-05-25 12:08:31Z raasch
101	! Check for user-defined profiles
102	!
103	! 75 2007-03-22 09:54:05Z raasch
104	! "by_user" allowed as initializing action, -data_output_ts,
105	! leapfrog with non-flat topography not allowed any more, loop_optimization
106	! and pt_reference are checked, moisture renamed humidity,
107	! output of precipitation amount/rate and roughnes length + check
108	! possible negative humidities are avoided in initial profile,
109	! dirichlet/neumann changed to dirichlet/radiation, etc.,
110	! revision added to run_description_header
111	!
112	! 20 2007-02-26 00:12:32Z raasch
113	! Temperature and humidity gradients at top are now calculated for nzt+1,
114	! top_heatflux and respective boundary condition bc_pt_t is checked
115	!
116	! RCS Log replace by Id keyword, revision history cleaned up
117	!
118	! Revision 1.61 2006/08/04 14:20:25 raasch
119	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
120	! use_upstream_for_tke, default value for dt_dopts,
121	! generation of file header moved from routines palm and header to here
122	!
123	! Revision 1.1 1997/08/26 06:29:23 raasch
124	! Initial revision
125	!
126	!
127	! Description:
128	! ------------
129	! Check control parameters and deduce further quantities.
130	!------------------------------------------------------------------------------!
131
132	USE arrays_3d
133	USE constants
134	USE control_parameters
135	USE dvrp_variables
136	USE grid_variables
137	USE indices
138	USE model_1d
139	USE netcdf_control
140	USE particle_attributes
141	USE pegrid
142	USE profil_parameter
143	USE subsidence_mod
144	USE statistics
145	USE transpose_indices
146
147	IMPLICIT NONE
148
149	CHARACTER (LEN=1) :: sq
150	CHARACTER (LEN=6) :: var
151	CHARACTER (LEN=7) :: unit
152	CHARACTER (LEN=8) :: date
153	CHARACTER (LEN=10) :: time
154	CHARACTER (LEN=40) :: coupling_string
155	CHARACTER (LEN=100) :: action
156
157	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
158	position, prec
159	LOGICAL :: found, ldum
160	REAL :: gradient, maxn, maxp, remote = 0.0, &
161	simulation_time_since_reference
162
163	!
164	!-- Warning, if host is not set
165	IF ( host(1:1) == ' ' ) THEN
166	message_string = '"host" is not set. Please check that environment ' // &
167	'variable "localhost" & is set before running PALM'
168	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
169	ENDIF
170
171	!
172	!-- Check the coupling mode
173	IF ( coupling_mode /= 'uncoupled' .AND. &
174	coupling_mode /= 'atmosphere_to_ocean' .AND. &
175	coupling_mode /= 'ocean_to_atmosphere' ) THEN
176	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
177	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
178	ENDIF
179
180	!
181	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
182	IF ( coupling_mode /= 'uncoupled' ) THEN
183
184	IF ( dt_coupling == 9999999.9 ) THEN
185	message_string = 'dt_coupling is not set but required for coup' // &
186	'ling mode "' // TRIM( coupling_mode ) // '"'
187	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
188	ENDIF
189
190	#if defined( __parallel )
191	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
192	ierr )
193	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
194	status, ierr )
195	IF ( dt_coupling /= remote ) THEN
196	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
197	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
198	'dt_coupling_remote = ', remote
199	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
200	ENDIF
201	IF ( dt_coupling <= 0.0 ) THEN
202	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
203	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
204	status, ierr )
205	dt_coupling = MAX( dt_max, remote )
206	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
207	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
208	'MAX(dt_max(A,O)) = ', dt_coupling
209	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
210	ENDIF
211
212	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
213	ierr )
214	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
215	status, ierr )
216	IF ( restart_time /= remote ) THEN
217	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
218	'": restart_time = ', restart_time, '& is not equal to ', &
219	'restart_time_remote = ', remote
220	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
221	ENDIF
222
223	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
224	ierr )
225	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
226	status, ierr )
227	IF ( dt_restart /= remote ) THEN
228	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
229	'": dt_restart = ', dt_restart, '& is not equal to ', &
230	'dt_restart_remote = ', remote
231	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
232	ENDIF
233
234	simulation_time_since_reference = end_time - coupling_start_time
235	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
236	14, comm_inter, ierr )
237	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
238	status, ierr )
239	IF ( simulation_time_since_reference /= remote ) THEN
240	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
241	'": simulation_time_since_reference = ', &
242	simulation_time_since_reference, '& is not equal to ', &
243	'simulation_time_since_reference_remote = ', remote
244	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
245	ENDIF
246
247	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
248	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
249	status, ierr )
250	IF ( dx /= remote ) THEN
251	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
252	'": dx = ', dx, '& is not equal to dx_remote = ', remote
253	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
254	ENDIF
255
256	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
257	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
258	status, ierr )
259	IF ( dy /= remote ) THEN
260	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
261	'": dy = ', dy, '& is not equal to dy_remote = ', remote
262	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
263	ENDIF
264
265	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
266	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
267	status, ierr )
268	IF ( nx /= iremote ) THEN
269	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
270	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
271	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
272	ENDIF
273
274	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
275	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
276	status, ierr )
277	IF ( ny /= iremote ) THEN
278	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
279	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
280	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
281	ENDIF
282	#else
283	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
284	' ''mrun -K parallel'''
285	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
286	#endif
287	ENDIF
288
289	#if defined( __parallel )
290	!
291	!-- Exchange via intercommunicator
292	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
293	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
294	ierr )
295	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
296	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
297	comm_inter, status, ierr )
298	ENDIF
299	#endif
300
301
302	!
303	!-- Generate the file header which is used as a header for most of PALM's
304	!-- output files
305	CALL DATE_AND_TIME( date, time )
306	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
307	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
308	IF ( coupling_mode == 'uncoupled' ) THEN
309	coupling_string = ''
310	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
311	coupling_string = ' coupled (atmosphere)'
312	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
313	coupling_string = ' coupled (ocean)'
314	ENDIF
315
316	WRITE ( run_description_header, &
317	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
318	TRIM( version ), TRIM( revision ), 'run: ', &
319	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
320	'host: ', TRIM( host ), run_date, run_time
321
322	!
323	!-- Check the general loop optimization method
324	IF ( loop_optimization == 'default' ) THEN
325	IF ( host(1:3) == 'nec' ) THEN
326	loop_optimization = 'vector'
327	ELSE
328	loop_optimization = 'cache'
329	ENDIF
330	ENDIF
331	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
332	.AND. loop_optimization /= 'vector' ) THEN
333	message_string = 'illegal value given for loop_optimization: "' // &
334	TRIM( loop_optimization ) // '"'
335	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
336	ENDIF
337
338	!
339	!-- Check topography setting (check for illegal parameter combinations)
340	IF ( topography /= 'flat' ) THEN
341	action = ' '
342	IF ( scalar_advec /= 'pw-scheme' ) THEN
343	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
344	ENDIF
345	IF ( momentum_advec /= 'pw-scheme' ) THEN
346	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
347	ENDIF
348	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
349	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
350	ENDIF
351	IF ( psolver == 'sor' ) THEN
352	WRITE( action, '(A,A)' ) 'psolver = ', psolver
353	ENDIF
354	IF ( sloping_surface ) THEN
355	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
356	ENDIF
357	IF ( galilei_transformation ) THEN
358	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
359	ENDIF
360	IF ( cloud_physics ) THEN
361	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
362	ENDIF
363	IF ( cloud_droplets ) THEN
364	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
365	ENDIF
366	IF ( .NOT. prandtl_layer ) THEN
367	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
368	ENDIF
369	IF ( action /= ' ' ) THEN
370	message_string = 'a non-flat topography does not allow ' // &
371	TRIM( action )
372	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
373	ENDIF
374	!
375	!-- In case of non-flat topography, check whether the convention how to
376	!-- define the topography grid has been set correctly, or whether the default
377	!-- is applicable. If this is not possible, abort.
378	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
379	IF ( TRIM( topography ) /= 'single_building' .AND. &
380	TRIM( topography ) /= 'single_street_canyon' .AND. &
381	TRIM( topography ) /= 'read_from_file' ) THEN
382	!-- The default value is not applicable here, because it is only valid
383	!-- for the two standard cases 'single_building' and 'read_from_file'
384	!-- defined in init_grid.
385	WRITE( message_string, * ) &
386	'The value for "topography_grid_convention" ', &
387	'is not set. Its default value is & only valid for ', &
388	'"topography" = ''single_building'', ', &
389	'''single_street_canyon'' & or ''read_from_file''.', &
390	' & Choose ''cell_edge'' or ''cell_center''.'
391	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
392	ELSE
393	!-- The default value is applicable here.
394	!-- Set convention according to topography.
395	IF ( TRIM( topography ) == 'single_building' .OR. &
396	TRIM( topography ) == 'single_street_canyon' ) THEN
397	topography_grid_convention = 'cell_edge'
398	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
399	topography_grid_convention = 'cell_center'
400	ENDIF
401	ENDIF
402	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
403	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
404	WRITE( message_string, * ) &
405	'The value for "topography_grid_convention" is ', &
406	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
407	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
408	ENDIF
409
410	ENDIF
411
412	!
413	!-- Check ocean setting
414	IF ( ocean ) THEN
415
416	action = ' '
417	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
418	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
419	ENDIF
420	IF ( momentum_advec == 'ups-scheme' ) THEN
421	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
422	ENDIF
423	IF ( action /= ' ' ) THEN
424	message_string = 'ocean = .T. does not allow ' // TRIM( action )
425	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
426	ENDIF
427
428	ELSEIF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
429	TRIM( coupling_char ) == '_O' ) THEN
430
431	!
432	!-- Check whether an (uncoupled) atmospheric run has been declared as an
433	!-- ocean run (this setting is done via mrun-option -y)
434
435	message_string = 'ocean = .F. does not allow coupling_char = "' // &
436	TRIM( coupling_char ) // '" set by mrun-option "-y"'
437	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
438
439	ENDIF
440
441	!
442	!-- Check whether there are any illegal values
443	!-- Pressure solver:
444	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
445	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
446	message_string = 'unknown solver for perturbation pressure: psolver' // &
447	' = "' // TRIM( psolver ) // '"'
448	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
449	ENDIF
450
451	#if defined( __parallel )
452	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
453	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
454	'for a 1d domain-decomposition along x & please do' // &
455	' not set npey/=1 in the parameter file'
456	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
457	ENDIF
458	IF ( psolver == 'poisfft_hybrid' .AND. &
459	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
460	psolver == 'multigrid' .AND. &
461	( nxra > nxr .OR. nyna > nyn ) ) THEN
462	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
463	'work for subdomains with unequal size & please ' // &
464	'set grid_matching = ''strict'' in the parameter file'
465	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
466	ENDIF
467	#else
468	IF ( psolver == 'poisfft_hybrid' ) THEN
469	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
470	' for a parallel environment'
471	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
472	ENDIF
473	#endif
474
475	IF ( psolver == 'multigrid' ) THEN
476	IF ( cycle_mg == 'w' ) THEN
477	gamma_mg = 2
478	ELSEIF ( cycle_mg == 'v' ) THEN
479	gamma_mg = 1
480	ELSE
481	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
482	TRIM( cycle_mg ) // '"'
483	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
484	ENDIF
485	ENDIF
486
487	IF ( fft_method /= 'singleton-algorithm' .AND. &
488	fft_method /= 'temperton-algorithm' .AND. &
489	fft_method /= 'system-specific' ) THEN
490	message_string = 'unknown fft-algorithm: fft_method = "' // &
491	TRIM( fft_method ) // '"'
492	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
493	ENDIF
494
495	!
496	!-- Advection schemes:
497	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
498	THEN
499	message_string = 'unknown advection scheme: momentum_advec = "' // &
500	TRIM( momentum_advec ) // '"'
501	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
502	ENDIF
503	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
504	.AND. timestep_scheme /= 'euler' ) THEN
505	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
506	'" is not allowed with timestep_scheme = "' // &
507	TRIM( timestep_scheme ) // '"'
508	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
509	ENDIF
510
511	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
512	scalar_advec /= 'ups-scheme' ) THEN
513	message_string = 'unknown advection scheme: scalar_advec = "' // &
514	TRIM( scalar_advec ) // '"'
515	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
516	ENDIF
517
518	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
519	use_upstream_for_tke = .TRUE.
520	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
521	'use_sgs_for_particles = .TRUE.'
522	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
523	ENDIF
524
525	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
526	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
527	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
528	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
529	ENDIF
530
531	!
532	!-- Timestep schemes:
533	SELECT CASE ( TRIM( timestep_scheme ) )
534
535	CASE ( 'euler' )
536	intermediate_timestep_count_max = 1
537	asselin_filter_factor = 0.0
538
539	CASE ( 'leapfrog', 'leapfrog+euler' )
540	intermediate_timestep_count_max = 1
541
542	CASE ( 'runge-kutta-2' )
543	intermediate_timestep_count_max = 2
544	asselin_filter_factor = 0.0
545
546	CASE ( 'runge-kutta-3' )
547	intermediate_timestep_count_max = 3
548	asselin_filter_factor = 0.0
549
550	CASE DEFAULT
551	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
552	TRIM( timestep_scheme ) // '"'
553	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
554
555	END SELECT
556
557	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
558	THEN
559	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
560	'" & does not work with timestep_scheme "' // &
561	TRIM( timestep_scheme ) // '"'
562	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
563	ENDIF
564
565	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
566	THEN
567	message_string = 'momentum advection scheme "' // &
568	TRIM( momentum_advec ) // '" & does not work with ' // &
569	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
570	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
571	ENDIF
572
573	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
574	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
575	!
576	!-- No restart run: several initialising actions are possible
577	action = initializing_actions
578	DO WHILE ( TRIM( action ) /= '' )
579	position = INDEX( action, ' ' )
580	SELECT CASE ( action(1:position-1) )
581
582	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
583	'by_user', 'initialize_vortex', 'initialize_ptanom' )
584	action = action(position+1:)
585
586	CASE DEFAULT
587	message_string = 'initializing_action = "' // &
588	TRIM( action ) // '" unkown or not allowed'
589	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
590
591	END SELECT
592	ENDDO
593	ENDIF
594
595	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
596	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
597	message_string = 'initializing_actions = "set_constant_profiles"' // &
598	' and "set_1d-model_profiles" are not allowed ' // &
599	'simultaneously'
600	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
601	ENDIF
602
603	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
604	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
605	message_string = 'initializing_actions = "set_constant_profiles"' // &
606	' and "by_user" are not allowed simultaneously'
607	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
608	ENDIF
609
610	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
611	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
612	message_string = 'initializing_actions = "by_user" and ' // &
613	'"set_1d-model_profiles" are not allowed simultaneously'
614	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
615	ENDIF
616
617	IF ( cloud_physics .AND. .NOT. humidity ) THEN
618	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
619	'not allowed with humidity = ', humidity
620	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
621	ENDIF
622
623	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
624	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
625	'not allowed with cloud_physics = ', cloud_physics
626	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
627	ENDIF
628
629	IF ( humidity .AND. sloping_surface ) THEN
630	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
631	'are not allowed simultaneously'
632	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
633	ENDIF
634
635	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
636	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
637	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
638	ENDIF
639
640	IF ( passive_scalar .AND. humidity ) THEN
641	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
642	'is not allowed simultaneously'
643	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
644	ENDIF
645
646	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
647	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
648	' = .TRUE.'
649	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
650	ENDIF
651
652	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
653	message_string = 'illegal value "' // TRIM( grid_matching ) // &
654	'" found for parameter grid_matching'
655	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
656	ENDIF
657
658	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
659	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
660	'coefficient & given value is drag_coefficient = 0.0'
661	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
662	ENDIF
663
664	!
665	!-- In case of no model continuation run, check initialising parameters and
666	!-- deduce further quantities
667	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
668
669	!
670	!-- Initial profiles for 1D and 3D model, respectively
671	u_init = ug_surface
672	v_init = vg_surface
673	pt_init = pt_surface
674	IF ( humidity ) q_init = q_surface
675	IF ( ocean ) sa_init = sa_surface
676	IF ( passive_scalar ) q_init = s_surface
677	IF ( plant_canopy ) lad = 0.0
678
679	!
680	!--
681	!-- If required, compute initial profile of the geostrophic wind
682	!-- (component ug)
683	i = 1
684	gradient = 0.0
685
686	IF ( .NOT. ocean ) THEN
687
688	ug_vertical_gradient_level_ind(1) = 0
689	ug(0) = ug_surface
690	DO k = 1, nzt+1
691	IF ( i < 11 ) THEN
692	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
693	ug_vertical_gradient_level(i) >= 0.0 ) THEN
694	gradient = ug_vertical_gradient(i) / 100.0
695	ug_vertical_gradient_level_ind(i) = k - 1
696	i = i + 1
697	ENDIF
698	ENDIF
699	IF ( gradient /= 0.0 ) THEN
700	IF ( k /= 1 ) THEN
701	ug(k) = ug(k-1) + dzu(k) * gradient
702	ELSE
703	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
704	ENDIF
705	ELSE
706	ug(k) = ug(k-1)
707	ENDIF
708	ENDDO
709
710	ELSE
711
712	ug_vertical_gradient_level_ind(1) = nzt+1
713	ug(nzt+1) = ug_surface
714	DO k = nzt, 0, -1
715	IF ( i < 11 ) THEN
716	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
717	ug_vertical_gradient_level(i) <= 0.0 ) THEN
718	gradient = ug_vertical_gradient(i) / 100.0
719	ug_vertical_gradient_level_ind(i) = k + 1
720	i = i + 1
721	ENDIF
722	ENDIF
723	IF ( gradient /= 0.0 ) THEN
724	IF ( k /= nzt ) THEN
725	ug(k) = ug(k+1) - dzu(k+1) * gradient
726	ELSE
727	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
728	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
729	ENDIF
730	ELSE
731	ug(k) = ug(k+1)
732	ENDIF
733	ENDDO
734
735	ENDIF
736
737	u_init = ug
738
739	!
740	!-- In case of no given gradients for ug, choose a vanishing gradient
741	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
742	ug_vertical_gradient_level(1) = 0.0
743	ENDIF
744
745	!
746	!--
747	!-- If required, compute initial profile of the geostrophic wind
748	!-- (component vg)
749	i = 1
750	gradient = 0.0
751
752	IF ( .NOT. ocean ) THEN
753
754	vg_vertical_gradient_level_ind(1) = 0
755	vg(0) = vg_surface
756	DO k = 1, nzt+1
757	IF ( i < 11 ) THEN
758	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
759	vg_vertical_gradient_level(i) >= 0.0 ) THEN
760	gradient = vg_vertical_gradient(i) / 100.0
761	vg_vertical_gradient_level_ind(i) = k - 1
762	i = i + 1
763	ENDIF
764	ENDIF
765	IF ( gradient /= 0.0 ) THEN
766	IF ( k /= 1 ) THEN
767	vg(k) = vg(k-1) + dzu(k) * gradient
768	ELSE
769	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
770	ENDIF
771	ELSE
772	vg(k) = vg(k-1)
773	ENDIF
774	ENDDO
775
776	ELSE
777
778	vg_vertical_gradient_level_ind(1) = nzt+1
779	vg(nzt+1) = vg_surface
780	DO k = nzt, 0, -1
781	IF ( i < 11 ) THEN
782	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
783	vg_vertical_gradient_level(i) <= 0.0 ) THEN
784	gradient = vg_vertical_gradient(i) / 100.0
785	vg_vertical_gradient_level_ind(i) = k + 1
786	i = i + 1
787	ENDIF
788	ENDIF
789	IF ( gradient /= 0.0 ) THEN
790	IF ( k /= nzt ) THEN
791	vg(k) = vg(k+1) - dzu(k+1) * gradient
792	ELSE
793	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
794	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
795	ENDIF
796	ELSE
797	vg(k) = vg(k+1)
798	ENDIF
799	ENDDO
800
801	ENDIF
802
803	v_init = vg
804
805	!
806	!-- In case of no given gradients for vg, choose a vanishing gradient
807	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
808	vg_vertical_gradient_level(1) = 0.0
809	ENDIF
810
811	!
812	!-- Compute initial temperature profile using the given temperature gradients
813	i = 1
814	gradient = 0.0
815
816	IF ( .NOT. ocean ) THEN
817
818	pt_vertical_gradient_level_ind(1) = 0
819	DO k = 1, nzt+1
820	IF ( i < 11 ) THEN
821	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
822	pt_vertical_gradient_level(i) >= 0.0 ) THEN
823	gradient = pt_vertical_gradient(i) / 100.0
824	pt_vertical_gradient_level_ind(i) = k - 1
825	i = i + 1
826	ENDIF
827	ENDIF
828	IF ( gradient /= 0.0 ) THEN
829	IF ( k /= 1 ) THEN
830	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
831	ELSE
832	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
833	ENDIF
834	ELSE
835	pt_init(k) = pt_init(k-1)
836	ENDIF
837	ENDDO
838
839	ELSE
840
841	pt_vertical_gradient_level_ind(1) = nzt+1
842	DO k = nzt, 0, -1
843	IF ( i < 11 ) THEN
844	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
845	pt_vertical_gradient_level(i) <= 0.0 ) THEN
846	gradient = pt_vertical_gradient(i) / 100.0
847	pt_vertical_gradient_level_ind(i) = k + 1
848	i = i + 1
849	ENDIF
850	ENDIF
851	IF ( gradient /= 0.0 ) THEN
852	IF ( k /= nzt ) THEN
853	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
854	ELSE
855	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
856	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
857	ENDIF
858	ELSE
859	pt_init(k) = pt_init(k+1)
860	ENDIF
861	ENDDO
862
863	ENDIF
864
865	!
866	!-- In case of no given temperature gradients, choose gradient of neutral
867	!-- stratification
868	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
869	pt_vertical_gradient_level(1) = 0.0
870	ENDIF
871
872	!
873	!-- Store temperature gradient at the top boundary for possible Neumann
874	!-- boundary condition
875	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
876
877	!
878	!-- If required, compute initial humidity or scalar profile using the given
879	!-- humidity/scalar gradient. In case of scalar transport, initially store
880	!-- values of the scalar parameters on humidity parameters
881	IF ( passive_scalar ) THEN
882	bc_q_b = bc_s_b
883	bc_q_t = bc_s_t
884	q_surface = s_surface
885	q_surface_initial_change = s_surface_initial_change
886	q_vertical_gradient = s_vertical_gradient
887	q_vertical_gradient_level = s_vertical_gradient_level
888	surface_waterflux = surface_scalarflux
889	wall_humidityflux = wall_scalarflux
890	ENDIF
891
892	IF ( humidity .OR. passive_scalar ) THEN
893
894	i = 1
895	gradient = 0.0
896	q_vertical_gradient_level_ind(1) = 0
897	DO k = 1, nzt+1
898	IF ( i < 11 ) THEN
899	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
900	q_vertical_gradient_level(i) >= 0.0 ) THEN
901	gradient = q_vertical_gradient(i) / 100.0
902	q_vertical_gradient_level_ind(i) = k - 1
903	i = i + 1
904	ENDIF
905	ENDIF
906	IF ( gradient /= 0.0 ) THEN
907	IF ( k /= 1 ) THEN
908	q_init(k) = q_init(k-1) + dzu(k) * gradient
909	ELSE
910	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
911	ENDIF
912	ELSE
913	q_init(k) = q_init(k-1)
914	ENDIF
915	!
916	!-- Avoid negative humidities
917	IF ( q_init(k) < 0.0 ) THEN
918	q_init(k) = 0.0
919	ENDIF
920	ENDDO
921
922	!
923	!-- In case of no given humidity gradients, choose zero gradient
924	!-- conditions
925	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
926	q_vertical_gradient_level(1) = 0.0
927	ENDIF
928
929	!
930	!-- Store humidity gradient at the top boundary for possile Neumann
931	!-- boundary condition
932	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
933
934	ENDIF
935
936	!
937	!-- If required, compute initial salinity profile using the given salinity
938	!-- gradients
939	IF ( ocean ) THEN
940
941	i = 1
942	gradient = 0.0
943
944	sa_vertical_gradient_level_ind(1) = nzt+1
945	DO k = nzt, 0, -1
946	IF ( i < 11 ) THEN
947	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
948	sa_vertical_gradient_level(i) <= 0.0 ) THEN
949	gradient = sa_vertical_gradient(i) / 100.0
950	sa_vertical_gradient_level_ind(i) = k + 1
951	i = i + 1
952	ENDIF
953	ENDIF
954	IF ( gradient /= 0.0 ) THEN
955	IF ( k /= nzt ) THEN
956	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
957	ELSE
958	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
959	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
960	ENDIF
961	ELSE
962	sa_init(k) = sa_init(k+1)
963	ENDIF
964	ENDDO
965
966	ENDIF
967
968	!
969	!-- If required compute the profile of leaf area density used in the plant
970	!-- canopy model
971	IF ( plant_canopy ) THEN
972
973	i = 1
974	gradient = 0.0
975
976	IF ( .NOT. ocean ) THEN
977
978	lad(0) = lad_surface
979
980	lad_vertical_gradient_level_ind(1) = 0
981	DO k = 1, pch_index
982	IF ( i < 11 ) THEN
983	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
984	lad_vertical_gradient_level(i) >= 0.0 ) THEN
985	gradient = lad_vertical_gradient(i)
986	lad_vertical_gradient_level_ind(i) = k - 1
987	i = i + 1
988	ENDIF
989	ENDIF
990	IF ( gradient /= 0.0 ) THEN
991	IF ( k /= 1 ) THEN
992	lad(k) = lad(k-1) + dzu(k) * gradient
993	ELSE
994	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
995	ENDIF
996	ELSE
997	lad(k) = lad(k-1)
998	ENDIF
999	ENDDO
1000
1001	ENDIF
1002
1003	!
1004	!-- In case of no given leaf area density gradients, choose a vanishing
1005	!-- gradient
1006	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
1007	lad_vertical_gradient_level(1) = 0.0
1008	ENDIF
1009
1010	ENDIF
1011
1012	ENDIF
1013
1014	!
1015	!-- Initialize large scale subsidence if required
1016	IF ( subs_vertical_gradient_level(1) /= -9999999.9 ) THEN
1017	large_scale_subsidence = .TRUE.
1018	CALL init_w_subsidence
1019	END IF
1020
1021
1022	!
1023	!-- Compute Coriolis parameter
1024	f = 2.0 * omega * SIN( phi / 180.0 * pi )
1025	fs = 2.0 * omega * COS( phi / 180.0 * pi )
1026
1027	!
1028	!-- Ocean runs always use reference values in the buoyancy term. Therefore
1029	!-- set the reference temperature equal to the surface temperature.
1030	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
1031
1032	!
1033	!-- Reference value has to be used in buoyancy terms
1034	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
1035
1036	!
1037	!-- Sign of buoyancy/stability terms
1038	IF ( ocean ) atmos_ocean_sign = -1.0
1039
1040	!
1041	!-- Ocean version must use flux boundary conditions at the top
1042	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
1043	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
1044	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
1045	ENDIF
1046
1047	!
1048	!-- In case of a given slope, compute the relevant quantities
1049	IF ( alpha_surface /= 0.0 ) THEN
1050	IF ( ABS( alpha_surface ) > 90.0 ) THEN
1051	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1052	' ) must be < 90.0'
1053	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1054	ENDIF
1055	sloping_surface = .TRUE.
1056	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1057	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1058	ENDIF
1059
1060	!
1061	!-- Check time step and cfl_factor
1062	IF ( dt /= -1.0 ) THEN
1063	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1064	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1065	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1066	ENDIF
1067	dt_3d = dt
1068	dt_fixed = .TRUE.
1069	ENDIF
1070
1071	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1072	IF ( cfl_factor == -1.0 ) THEN
1073	IF ( momentum_advec == 'ups-scheme' .OR. &
1074	scalar_advec == 'ups-scheme' ) THEN
1075	cfl_factor = 0.8
1076	ELSE
1077	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1078	cfl_factor = 0.8
1079	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1080	cfl_factor = 0.9
1081	ELSE
1082	cfl_factor = 0.1
1083	ENDIF
1084	ENDIF
1085	ELSE
1086	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1087	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1088	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1089	ENDIF
1090	ENDIF
1091
1092	!
1093	!-- Store simulated time at begin
1094	simulated_time_at_begin = simulated_time
1095
1096	!
1097	!-- Store reference time for coupled runs and change the coupling flag,
1098	!-- if ...
1099	IF ( simulated_time == 0.0 ) THEN
1100	IF ( coupling_start_time == 0.0 ) THEN
1101	time_since_reference_point = 0.0
1102	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1103	run_coupled = .FALSE.
1104	ENDIF
1105	ENDIF
1106
1107	!
1108	!-- Set wind speed in the Galilei-transformed system
1109	IF ( galilei_transformation ) THEN
1110	IF ( use_ug_for_galilei_tr .AND. &
1111	ug_vertical_gradient_level(1) == 0.0 .AND. &
1112	vg_vertical_gradient_level(1) == 0.0 ) THEN
1113	u_gtrans = ug_surface
1114	v_gtrans = vg_surface
1115	ELSEIF ( use_ug_for_galilei_tr .AND. &
1116	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1117	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1118	' with galilei transformation'
1119	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1120	ELSEIF ( use_ug_for_galilei_tr .AND. &
1121	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1122	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1123	' with galilei transformation'
1124	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1125	ELSE
1126	message_string = 'variable translation speed used for galilei-' // &
1127	'transformation, which may cause & instabilities in stably ' // &
1128	'stratified regions'
1129	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1130	ENDIF
1131	ENDIF
1132
1133	!
1134	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1135	!-- fluxes have to be used in the diffusion-terms
1136	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1137
1138	!
1139	!-- Check boundary conditions and set internal variables:
1140	!-- Lateral boundary conditions
1141	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1142	bc_lr /= 'radiation/dirichlet' ) THEN
1143	message_string = 'unknown boundary condition: bc_lr = "' // &
1144	TRIM( bc_lr ) // '"'
1145	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1146	ENDIF
1147	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1148	bc_ns /= 'radiation/dirichlet' ) THEN
1149	message_string = 'unknown boundary condition: bc_ns = "' // &
1150	TRIM( bc_ns ) // '"'
1151	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1152	ENDIF
1153
1154	!
1155	!-- Internal variables used for speed optimization in if clauses
1156	IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE.
1157	IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE.
1158
1159	!
1160	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1161	!-- Willimas advection scheme. Several schemes and tools do not work with
1162	!-- non-cyclic boundary conditions.
1163	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1164	IF ( psolver /= 'multigrid' ) THEN
1165	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1166	'psolver = "' // TRIM( psolver ) // '"'
1167	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1168	ENDIF
1169	IF ( momentum_advec /= 'pw-scheme' ) THEN
1170	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1171	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1172	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1173	ENDIF
1174	IF ( scalar_advec /= 'pw-scheme' ) THEN
1175	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1176	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1177	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1178	ENDIF
1179	IF ( galilei_transformation ) THEN
1180	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1181	'galilei_transformation = .T.'
1182	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1183	ENDIF
1184	ENDIF
1185
1186	!
1187	!-- Bottom boundary condition for the turbulent Kinetic energy
1188	IF ( bc_e_b == 'neumann' ) THEN
1189	ibc_e_b = 1
1190	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1191	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1192	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1193	ENDIF
1194	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1195	ibc_e_b = 2
1196	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1197	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1198	TRIM( bc_e_b ) // '"'
1199	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1200	ENDIF
1201	IF ( .NOT. prandtl_layer ) THEN
1202	bc_e_b = 'neumann'
1203	ibc_e_b = 1
1204	message_string = 'boundary condition bc_e_b changed to "' // &
1205	TRIM( bc_e_b ) // '"'
1206	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1207	ENDIF
1208	ELSE
1209	message_string = 'unknown boundary condition: bc_e_b = "' // &
1210	TRIM( bc_e_b ) // '"'
1211	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1212	ENDIF
1213
1214	!
1215	!-- Boundary conditions for perturbation pressure
1216	IF ( bc_p_b == 'dirichlet' ) THEN
1217	ibc_p_b = 0
1218	ELSEIF ( bc_p_b == 'neumann' ) THEN
1219	ibc_p_b = 1
1220	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1221	ibc_p_b = 2
1222	ELSE
1223	message_string = 'unknown boundary condition: bc_p_b = "' // &
1224	TRIM( bc_p_b ) // '"'
1225	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1226	ENDIF
1227	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1228	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1229	'" not allowed with prandtl_layer = .FALSE.'
1230	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1231	ENDIF
1232	IF ( bc_p_t == 'dirichlet' ) THEN
1233	ibc_p_t = 0
1234	ELSEIF ( bc_p_t == 'neumann' ) THEN
1235	ibc_p_t = 1
1236	ELSE
1237	message_string = 'unknown boundary condition: bc_p_t = "' // &
1238	TRIM( bc_p_t ) // '"'
1239	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1240	ENDIF
1241
1242	!
1243	!-- Boundary conditions for potential temperature
1244	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1245	ibc_pt_b = 2
1246	ELSE
1247	IF ( bc_pt_b == 'dirichlet' ) THEN
1248	ibc_pt_b = 0
1249	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1250	ibc_pt_b = 1
1251	ELSE
1252	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1253	TRIM( bc_pt_b ) // '"'
1254	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1255	ENDIF
1256	ENDIF
1257
1258	IF ( bc_pt_t == 'dirichlet' ) THEN
1259	ibc_pt_t = 0
1260	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1261	ibc_pt_t = 1
1262	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1263	ibc_pt_t = 2
1264	ELSE
1265	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1266	TRIM( bc_pt_t ) // '"'
1267	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1268	ENDIF
1269
1270	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1271	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1272	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1273	top_momentumflux_v /= 9999999.9 ) THEN
1274	constant_top_momentumflux = .TRUE.
1275	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1276	top_momentumflux_v == 9999999.9 ) ) THEN
1277	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1278	'must be set'
1279	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1280	ENDIF
1281
1282	!
1283	!-- A given surface temperature implies Dirichlet boundary condition for
1284	!-- temperature. In this case specification of a constant heat flux is
1285	!-- forbidden.
1286	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1287	surface_heatflux /= 0.0 ) THEN
1288	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1289	'& is not allowed with constant_heatflux = .TRUE.'
1290	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1291	ENDIF
1292	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1293	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1294	'wed with pt_surface_initial_change (/=0) = ', &
1295	pt_surface_initial_change
1296	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1297	ENDIF
1298
1299	!
1300	!-- A given temperature at the top implies Dirichlet boundary condition for
1301	!-- temperature. In this case specification of a constant heat flux is
1302	!-- forbidden.
1303	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1304	top_heatflux /= 0.0 ) THEN
1305	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1306	'" is not allowed with constant_top_heatflux = .TRUE.'
1307	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1308	ENDIF
1309
1310	!
1311	!-- Boundary conditions for salinity
1312	IF ( ocean ) THEN
1313	IF ( bc_sa_t == 'dirichlet' ) THEN
1314	ibc_sa_t = 0
1315	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1316	ibc_sa_t = 1
1317	ELSE
1318	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1319	TRIM( bc_sa_t ) // '"'
1320	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1321	ENDIF
1322
1323	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1324	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1325	message_string = 'boundary condition: bc_sa_t = "' // &
1326	TRIM( bc_sa_t ) // '" requires to set ' // &
1327	'top_salinityflux'
1328	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1329	ENDIF
1330
1331	!
1332	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1333	!-- salinity. In this case specification of a constant salinity flux is
1334	!-- forbidden.
1335	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1336	top_salinityflux /= 0.0 ) THEN
1337	message_string = 'boundary condition: bc_sa_t = "' // &
1338	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1339	'constant_top_salinityflux = .TRUE.'
1340	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1341	ENDIF
1342
1343	ENDIF
1344
1345	!
1346	!-- In case of humidity or passive scalar, set boundary conditions for total
1347	!-- water content / scalar
1348	IF ( humidity .OR. passive_scalar ) THEN
1349	IF ( humidity ) THEN
1350	sq = 'q'
1351	ELSE
1352	sq = 's'
1353	ENDIF
1354	IF ( bc_q_b == 'dirichlet' ) THEN
1355	ibc_q_b = 0
1356	ELSEIF ( bc_q_b == 'neumann' ) THEN
1357	ibc_q_b = 1
1358	ELSE
1359	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1360	'_b ="' // TRIM( bc_q_b ) // '"'
1361	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1362	ENDIF
1363	IF ( bc_q_t == 'dirichlet' ) THEN
1364	ibc_q_t = 0
1365	ELSEIF ( bc_q_t == 'neumann' ) THEN
1366	ibc_q_t = 1
1367	ELSE
1368	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1369	'_t ="' // TRIM( bc_q_t ) // '"'
1370	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1371	ENDIF
1372
1373	IF ( surface_waterflux == 9999999.9 ) constant_waterflux = .FALSE.
1374
1375	!
1376	!-- A given surface humidity implies Dirichlet boundary condition for
1377	!-- humidity. In this case specification of a constant water flux is
1378	!-- forbidden.
1379	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1380	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1381	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1382	'th prescribed surface flux'
1383	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1384	ENDIF
1385	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1386	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1387	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1388	q_surface_initial_change
1389	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1390	ENDIF
1391
1392	ENDIF
1393
1394	!
1395	!-- Boundary conditions for horizontal components of wind speed
1396	IF ( bc_uv_b == 'dirichlet' ) THEN
1397	ibc_uv_b = 0
1398	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1399	ibc_uv_b = 1
1400	IF ( prandtl_layer ) THEN
1401	message_string = 'boundary condition: bc_uv_b = "' // &
1402	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1403	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1404	ENDIF
1405	ELSE
1406	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1407	TRIM( bc_uv_b ) // '"'
1408	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1409	ENDIF
1410
1411	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1412	bc_uv_t = 'neumann'
1413	ibc_uv_t = 1
1414	ELSE
1415	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1416	ibc_uv_t = 0
1417	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1418	ibc_uv_t = 1
1419	ELSE
1420	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1421	TRIM( bc_uv_t ) // '"'
1422	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1423	ENDIF
1424	ENDIF
1425
1426	!
1427	!-- Compute and check, respectively, the Rayleigh Damping parameter
1428	IF ( rayleigh_damping_factor == -1.0 ) THEN
1429	IF ( momentum_advec == 'ups-scheme' ) THEN
1430	rayleigh_damping_factor = 0.01
1431	ELSE
1432	rayleigh_damping_factor = 0.0
1433	ENDIF
1434	ELSE
1435	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1436	THEN
1437	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1438	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1439	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1440	ENDIF
1441	ENDIF
1442
1443	IF ( rayleigh_damping_height == -1.0 ) THEN
1444	IF ( .NOT. ocean ) THEN
1445	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1446	ELSE
1447	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1448	ENDIF
1449	ELSE
1450	IF ( .NOT. ocean ) THEN
1451	IF ( rayleigh_damping_height < 0.0 .OR. &
1452	rayleigh_damping_height > zu(nzt) ) THEN
1453	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1454	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1455	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1456	ENDIF
1457	ELSE
1458	IF ( rayleigh_damping_height > 0.0 .OR. &
1459	rayleigh_damping_height < zu(nzb) ) THEN
1460	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1461	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1462	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1463	ENDIF
1464	ENDIF
1465	ENDIF
1466
1467	!
1468	!-- Check limiters for Upstream-Spline scheme
1469	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1470	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1471	overshoot_limit_e < 0.0 ) THEN
1472	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1473	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1474	ENDIF
1475	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1476	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1477	message_string = 'ups_limit_... < 0.0 is not allowed'
1478	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1479	ENDIF
1480
1481	!
1482	!-- Check number of chosen statistic regions. More than 10 regions are not
1483	!-- allowed, because so far no more than 10 corresponding output files can
1484	!-- be opened (cf. check_open)
1485	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1486	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1487	statistic_regions+1, ' but only 10 regions are allowed'
1488	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1489	ENDIF
1490	IF ( normalizing_region > statistic_regions .OR. &
1491	normalizing_region < 0) THEN
1492	WRITE ( message_string, * ) 'normalizing_region = ', &
1493	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1494	' (value of statistic_regions)'
1495	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1496	ENDIF
1497
1498	!
1499	!-- Check the interval for sorting particles.
1500	!-- Using particles as cloud droplets requires sorting after each timestep.
1501	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1502	dt_sort_particles = 0.0
1503	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1504	'_droplets = .TRUE.'
1505	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1506	ENDIF
1507
1508	!
1509	!-- Set the default intervals for data output, if necessary
1510	!-- NOTE: dt_dosp has already been set in package_parin
1511	IF ( dt_data_output /= 9999999.9 ) THEN
1512	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1513	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1514	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1515	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1516	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1517	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1518	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1519	DO mid = 1, max_masks
1520	IF ( dt_domask(mid) == 9999999.9 ) dt_domask(mid) = dt_data_output
1521	ENDDO
1522	ENDIF
1523
1524	!
1525	!-- Set the default skip time intervals for data output, if necessary
1526	IF ( skip_time_dopr == 9999999.9 ) &
1527	skip_time_dopr = skip_time_data_output
1528	IF ( skip_time_dosp == 9999999.9 ) &
1529	skip_time_dosp = skip_time_data_output
1530	IF ( skip_time_do2d_xy == 9999999.9 ) &
1531	skip_time_do2d_xy = skip_time_data_output
1532	IF ( skip_time_do2d_xz == 9999999.9 ) &
1533	skip_time_do2d_xz = skip_time_data_output
1534	IF ( skip_time_do2d_yz == 9999999.9 ) &
1535	skip_time_do2d_yz = skip_time_data_output
1536	IF ( skip_time_do3d == 9999999.9 ) &
1537	skip_time_do3d = skip_time_data_output
1538	IF ( skip_time_data_output_av == 9999999.9 ) &
1539	skip_time_data_output_av = skip_time_data_output
1540	DO mid = 1, max_masks
1541	IF ( skip_time_domask(mid) == 9999999.9 ) &
1542	skip_time_domask(mid) = skip_time_data_output
1543	ENDDO
1544
1545	!
1546	!-- Check the average intervals (first for 3d-data, then for profiles and
1547	!-- spectra)
1548	IF ( averaging_interval > dt_data_output_av ) THEN
1549	WRITE( message_string, * ) 'averaging_interval = ', &
1550	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1551	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1552	ENDIF
1553
1554	IF ( averaging_interval_pr == 9999999.9 ) THEN
1555	averaging_interval_pr = averaging_interval
1556	ENDIF
1557
1558	IF ( averaging_interval_pr > dt_dopr ) THEN
1559	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1560	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1561	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1562	ENDIF
1563
1564	IF ( averaging_interval_sp == 9999999.9 ) THEN
1565	averaging_interval_sp = averaging_interval
1566	ENDIF
1567
1568	IF ( averaging_interval_sp > dt_dosp ) THEN
1569	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1570	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1571	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1572	ENDIF
1573
1574	!
1575	!-- Set the default interval for profiles entering the temporal average
1576	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1577	dt_averaging_input_pr = dt_averaging_input
1578	ENDIF
1579
1580	!
1581	!-- Set the default interval for the output of timeseries to a reasonable
1582	!-- value (tries to minimize the number of calls of flow_statistics)
1583	IF ( dt_dots == 9999999.9 ) THEN
1584	IF ( averaging_interval_pr == 0.0 ) THEN
1585	dt_dots = MIN( dt_run_control, dt_dopr )
1586	ELSE
1587	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1588	ENDIF
1589	ENDIF
1590
1591	!
1592	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1593	IF ( dt_averaging_input > averaging_interval ) THEN
1594	WRITE( message_string, * ) 'dt_averaging_input = ', &
1595	dt_averaging_input, ' must be <= averaging_interval = ', &
1596	averaging_interval
1597	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1598	ENDIF
1599
1600	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1601	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1602	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1603	averaging_interval_pr
1604	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1605	ENDIF
1606
1607	!
1608	!-- Set the default value for the integration interval of precipitation amount
1609	IF ( precipitation ) THEN
1610	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1611	precipitation_amount_interval = dt_do2d_xy
1612	ELSE
1613	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1614	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1615	precipitation_amount_interval, ' must not be larger than ', &
1616	'dt_do2d_xy = ', dt_do2d_xy
1617	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1618	ENDIF
1619	ENDIF
1620	ENDIF
1621
1622	!
1623	!-- Determine the number of output profiles and check whether they are
1624	!-- permissible
1625	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1626
1627	dopr_n = dopr_n + 1
1628	i = dopr_n
1629
1630	!
1631	!-- Determine internal profile number (for hom, homs)
1632	!-- and store height levels
1633	SELECT CASE ( TRIM( data_output_pr(i) ) )
1634
1635	CASE ( 'u', '#u' )
1636	dopr_index(i) = 1
1637	dopr_unit(i) = 'm/s'
1638	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1639	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1640	dopr_initial_index(i) = 5
1641	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1642	data_output_pr(i) = data_output_pr(i)(2:)
1643	ENDIF
1644
1645	CASE ( 'v', '#v' )
1646	dopr_index(i) = 2
1647	dopr_unit(i) = 'm/s'
1648	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1649	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1650	dopr_initial_index(i) = 6
1651	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1652	data_output_pr(i) = data_output_pr(i)(2:)
1653	ENDIF
1654
1655	CASE ( 'w' )
1656	dopr_index(i) = 3
1657	dopr_unit(i) = 'm/s'
1658	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1659
1660	CASE ( 'pt', '#pt' )
1661	IF ( .NOT. cloud_physics ) THEN
1662	dopr_index(i) = 4
1663	dopr_unit(i) = 'K'
1664	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1665	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1666	dopr_initial_index(i) = 7
1667	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1668	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1669	data_output_pr(i) = data_output_pr(i)(2:)
1670	ENDIF
1671	ELSE
1672	dopr_index(i) = 43
1673	dopr_unit(i) = 'K'
1674	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1675	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1676	dopr_initial_index(i) = 28
1677	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1678	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1679	data_output_pr(i) = data_output_pr(i)(2:)
1680	ENDIF
1681	ENDIF
1682
1683	CASE ( 'e' )
1684	dopr_index(i) = 8
1685	dopr_unit(i) = 'm2/s2'
1686	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1687	hom(nzb,2,8,:) = 0.0
1688
1689	CASE ( 'km', '#km' )
1690	dopr_index(i) = 9
1691	dopr_unit(i) = 'm2/s'
1692	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1693	hom(nzb,2,9,:) = 0.0
1694	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1695	dopr_initial_index(i) = 23
1696	hom(:,2,23,:) = hom(:,2,9,:)
1697	data_output_pr(i) = data_output_pr(i)(2:)
1698	ENDIF
1699
1700	CASE ( 'kh', '#kh' )
1701	dopr_index(i) = 10
1702	dopr_unit(i) = 'm2/s'
1703	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1704	hom(nzb,2,10,:) = 0.0
1705	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1706	dopr_initial_index(i) = 24
1707	hom(:,2,24,:) = hom(:,2,10,:)
1708	data_output_pr(i) = data_output_pr(i)(2:)
1709	ENDIF
1710
1711	CASE ( 'l', '#l' )
1712	dopr_index(i) = 11
1713	dopr_unit(i) = 'm'
1714	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1715	hom(nzb,2,11,:) = 0.0
1716	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1717	dopr_initial_index(i) = 25
1718	hom(:,2,25,:) = hom(:,2,11,:)
1719	data_output_pr(i) = data_output_pr(i)(2:)
1720	ENDIF
1721
1722	CASE ( 'w"u"' )
1723	dopr_index(i) = 12
1724	dopr_unit(i) = 'm2/s2'
1725	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1726	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1727
1728	CASE ( 'wu' )
1729	dopr_index(i) = 13
1730	dopr_unit(i) = 'm2/s2'
1731	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1732
1733	CASE ( 'w"v"' )
1734	dopr_index(i) = 14
1735	dopr_unit(i) = 'm2/s2'
1736	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1737	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1738
1739	CASE ( 'wv' )
1740	dopr_index(i) = 15
1741	dopr_unit(i) = 'm2/s2'
1742	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1743
1744	CASE ( 'w"pt"' )
1745	dopr_index(i) = 16
1746	dopr_unit(i) = 'K m/s'
1747	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1748
1749	CASE ( 'wpt' )
1750	dopr_index(i) = 17
1751	dopr_unit(i) = 'K m/s'
1752	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1753
1754	CASE ( 'wpt' )
1755	dopr_index(i) = 18
1756	dopr_unit(i) = 'K m/s'
1757	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1758
1759	CASE ( 'wu' )
1760	dopr_index(i) = 19
1761	dopr_unit(i) = 'm2/s2'
1762	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1763	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1764
1765	CASE ( 'wv' )
1766	dopr_index(i) = 20
1767	dopr_unit(i) = 'm2/s2'
1768	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1769	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1770
1771	CASE ( 'wptBC' )
1772	dopr_index(i) = 21
1773	dopr_unit(i) = 'K m/s'
1774	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1775
1776	CASE ( 'wptBC' )
1777	dopr_index(i) = 22
1778	dopr_unit(i) = 'K m/s'
1779	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1780
1781	CASE ( 'sa', '#sa' )
1782	IF ( .NOT. ocean ) THEN
1783	message_string = 'data_output_pr = ' // &
1784	TRIM( data_output_pr(i) ) // ' is not imp' // &
1785	'lemented for ocean = .FALSE.'
1786	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1787	ELSE
1788	dopr_index(i) = 23
1789	dopr_unit(i) = 'psu'
1790	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1791	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1792	dopr_initial_index(i) = 26
1793	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1794	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1795	data_output_pr(i) = data_output_pr(i)(2:)
1796	ENDIF
1797	ENDIF
1798
1799	CASE ( 'u*2' )
1800	dopr_index(i) = 30
1801	dopr_unit(i) = 'm2/s2'
1802	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1803
1804	CASE ( 'v*2' )
1805	dopr_index(i) = 31
1806	dopr_unit(i) = 'm2/s2'
1807	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1808
1809	CASE ( 'w*2' )
1810	dopr_index(i) = 32
1811	dopr_unit(i) = 'm2/s2'
1812	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1813
1814	CASE ( 'pt*2' )
1815	dopr_index(i) = 33
1816	dopr_unit(i) = 'K2'
1817	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1818
1819	CASE ( 'e*' )
1820	dopr_index(i) = 34
1821	dopr_unit(i) = 'm2/s2'
1822	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1823
1824	CASE ( 'w2pt' )
1825	dopr_index(i) = 35
1826	dopr_unit(i) = 'K m2/s2'
1827	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1828
1829	CASE ( 'wpt2' )
1830	dopr_index(i) = 36
1831	dopr_unit(i) = 'K2 m/s'
1832	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1833
1834	CASE ( 'we' )
1835	dopr_index(i) = 37
1836	dopr_unit(i) = 'm3/s3'
1837	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1838
1839	CASE ( 'w*3' )
1840	dopr_index(i) = 38
1841	dopr_unit(i) = 'm3/s3'
1842	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1843
1844	CASE ( 'Sw' )
1845	dopr_index(i) = 39
1846	dopr_unit(i) = 'none'
1847	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1848
1849	CASE ( 'p' )
1850	dopr_index(i) = 40
1851	dopr_unit(i) = 'Pa'
1852	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1853
1854	CASE ( 'q', '#q' )
1855	IF ( .NOT. humidity ) THEN
1856	message_string = 'data_output_pr = ' // &
1857	TRIM( data_output_pr(i) ) // ' is not imp' // &
1858	'lemented for humidity = .FALSE.'
1859	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1860	ELSE
1861	dopr_index(i) = 41
1862	dopr_unit(i) = 'kg/kg'
1863	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1864	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1865	dopr_initial_index(i) = 26
1866	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1867	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1868	data_output_pr(i) = data_output_pr(i)(2:)
1869	ENDIF
1870	ENDIF
1871
1872	CASE ( 's', '#s' )
1873	IF ( .NOT. passive_scalar ) THEN
1874	message_string = 'data_output_pr = ' // &
1875	TRIM( data_output_pr(i) ) // ' is not imp' // &
1876	'lemented for passive_scalar = .FALSE.'
1877	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1878	ELSE
1879	dopr_index(i) = 41
1880	dopr_unit(i) = 'kg/m3'
1881	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1882	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1883	dopr_initial_index(i) = 26
1884	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1885	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1886	data_output_pr(i) = data_output_pr(i)(2:)
1887	ENDIF
1888	ENDIF
1889
1890	CASE ( 'qv', '#qv' )
1891	IF ( .NOT. cloud_physics ) THEN
1892	dopr_index(i) = 41
1893	dopr_unit(i) = 'kg/kg'
1894	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1895	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1896	dopr_initial_index(i) = 26
1897	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1898	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1899	data_output_pr(i) = data_output_pr(i)(2:)
1900	ENDIF
1901	ELSE
1902	dopr_index(i) = 42
1903	dopr_unit(i) = 'kg/kg'
1904	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1905	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1906	dopr_initial_index(i) = 27
1907	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1908	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1909	data_output_pr(i) = data_output_pr(i)(2:)
1910	ENDIF
1911	ENDIF
1912
1913	CASE ( 'lpt', '#lpt' )
1914	IF ( .NOT. cloud_physics ) THEN
1915	message_string = 'data_output_pr = ' // &
1916	TRIM( data_output_pr(i) ) // ' is not imp' // &
1917	'lemented for cloud_physics = .FALSE.'
1918	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1919	ELSE
1920	dopr_index(i) = 4
1921	dopr_unit(i) = 'K'
1922	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1923	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1924	dopr_initial_index(i) = 7
1925	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1926	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1927	data_output_pr(i) = data_output_pr(i)(2:)
1928	ENDIF
1929	ENDIF
1930
1931	CASE ( 'vpt', '#vpt' )
1932	dopr_index(i) = 44
1933	dopr_unit(i) = 'K'
1934	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1935	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1936	dopr_initial_index(i) = 29
1937	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1938	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1939	data_output_pr(i) = data_output_pr(i)(2:)
1940	ENDIF
1941
1942	CASE ( 'w"vpt"' )
1943	dopr_index(i) = 45
1944	dopr_unit(i) = 'K m/s'
1945	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1946
1947	CASE ( 'wvpt' )
1948	dopr_index(i) = 46
1949	dopr_unit(i) = 'K m/s'
1950	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1951
1952	CASE ( 'wvpt' )
1953	dopr_index(i) = 47
1954	dopr_unit(i) = 'K m/s'
1955	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1956
1957	CASE ( 'w"q"' )
1958	IF ( .NOT. humidity ) THEN
1959	message_string = 'data_output_pr = ' // &
1960	TRIM( data_output_pr(i) ) // ' is not imp' // &
1961	'lemented for humidity = .FALSE.'
1962	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1963	ELSE
1964	dopr_index(i) = 48
1965	dopr_unit(i) = 'kg/kg m/s'
1966	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1967	ENDIF
1968
1969	CASE ( 'wq' )
1970	IF ( .NOT. humidity ) THEN
1971	message_string = 'data_output_pr = ' // &
1972	TRIM( data_output_pr(i) ) // ' is not imp' // &
1973	'lemented for humidity = .FALSE.'
1974	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1975	ELSE
1976	dopr_index(i) = 49
1977	dopr_unit(i) = 'kg/kg m/s'
1978	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1979	ENDIF
1980
1981	CASE ( 'wq' )
1982	IF ( .NOT. humidity ) THEN
1983	message_string = 'data_output_pr = ' // &
1984	TRIM( data_output_pr(i) ) // ' is not imp' // &
1985	'lemented for humidity = .FALSE.'
1986	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1987	ELSE
1988	dopr_index(i) = 50
1989	dopr_unit(i) = 'kg/kg m/s'
1990	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1991	ENDIF
1992
1993	CASE ( 'w"s"' )
1994	IF ( .NOT. passive_scalar ) THEN
1995	message_string = 'data_output_pr = ' // &
1996	TRIM( data_output_pr(i) ) // ' is not imp' // &
1997	'lemented for passive_scalar = .FALSE.'
1998	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1999	ELSE
2000	dopr_index(i) = 48
2001	dopr_unit(i) = 'kg/m3 m/s'
2002	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2003	ENDIF
2004
2005	CASE ( 'ws' )
2006	IF ( .NOT. passive_scalar ) THEN
2007	message_string = 'data_output_pr = ' // &
2008	TRIM( data_output_pr(i) ) // ' is not imp' // &
2009	'lemented for passive_scalar = .FALSE.'
2010	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2011	ELSE
2012	dopr_index(i) = 49
2013	dopr_unit(i) = 'kg/m3 m/s'
2014	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2015	ENDIF
2016
2017	CASE ( 'ws' )
2018	IF ( .NOT. passive_scalar ) THEN
2019	message_string = 'data_output_pr = ' // &
2020	TRIM( data_output_pr(i) ) // ' is not imp' // &
2021	'lemented for passive_scalar = .FALSE.'
2022	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2023	ELSE
2024	dopr_index(i) = 50
2025	dopr_unit(i) = 'kg/m3 m/s'
2026	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2027	ENDIF
2028
2029	CASE ( 'w"qv"' )
2030	IF ( humidity .AND. .NOT. cloud_physics ) &
2031	THEN
2032	dopr_index(i) = 48
2033	dopr_unit(i) = 'kg/kg m/s'
2034	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2035	ELSEIF( humidity .AND. cloud_physics ) THEN
2036	dopr_index(i) = 51
2037	dopr_unit(i) = 'kg/kg m/s'
2038	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2039	ELSE
2040	message_string = 'data_output_pr = ' // &
2041	TRIM( data_output_pr(i) ) // ' is not imp' // &
2042	'lemented for cloud_physics = .FALSE. an&' // &
2043	'd humidity = .FALSE.'
2044	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2045	ENDIF
2046
2047	CASE ( 'wqv' )
2048	IF ( humidity .AND. .NOT. cloud_physics ) &
2049	THEN
2050	dopr_index(i) = 49
2051	dopr_unit(i) = 'kg/kg m/s'
2052	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2053	ELSEIF( humidity .AND. cloud_physics ) THEN
2054	dopr_index(i) = 52
2055	dopr_unit(i) = 'kg/kg m/s'
2056	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2057	ELSE
2058	message_string = 'data_output_pr = ' // &
2059	TRIM( data_output_pr(i) ) // ' is not imp' // &
2060	'lemented for cloud_physics = .FALSE. an&' // &
2061	'd humidity = .FALSE.'
2062	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2063	ENDIF
2064
2065	CASE ( 'wqv' )
2066	IF ( humidity .AND. .NOT. cloud_physics ) &
2067	THEN
2068	dopr_index(i) = 50
2069	dopr_unit(i) = 'kg/kg m/s'
2070	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2071	ELSEIF( humidity .AND. cloud_physics ) THEN
2072	dopr_index(i) = 53
2073	dopr_unit(i) = 'kg/kg m/s'
2074	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2075	ELSE
2076	message_string = 'data_output_pr = ' // &
2077	TRIM( data_output_pr(i) ) // ' is not imp' // &
2078	'lemented for cloud_physics = .FALSE. an&' // &
2079	'd humidity = .FALSE.'
2080	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2081	ENDIF
2082
2083	CASE ( 'ql' )
2084	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2085	message_string = 'data_output_pr = ' // &
2086	TRIM( data_output_pr(i) ) // ' is not imp' // &
2087	'lemented for cloud_physics = .FALSE. or' // &
2088	'&cloud_droplets = .FALSE.'
2089	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2090	ELSE
2091	dopr_index(i) = 54
2092	dopr_unit(i) = 'kg/kg'
2093	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2094	ENDIF
2095
2096	CASE ( 'wuu*:dz' )
2097	dopr_index(i) = 55
2098	dopr_unit(i) = 'm2/s3'
2099	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2100
2101	CASE ( 'wp:dz' )
2102	dopr_index(i) = 56
2103	dopr_unit(i) = 'm2/s3'
2104	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2105
2106	CASE ( 'w"e:dz' )
2107	dopr_index(i) = 57
2108	dopr_unit(i) = 'm2/s3'
2109	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2110
2111	CASE ( 'u"pt"' )
2112	dopr_index(i) = 58
2113	dopr_unit(i) = 'K m/s'
2114	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2115
2116	CASE ( 'upt' )
2117	dopr_index(i) = 59
2118	dopr_unit(i) = 'K m/s'
2119	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2120
2121	CASE ( 'upt_t' )
2122	dopr_index(i) = 60
2123	dopr_unit(i) = 'K m/s'
2124	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2125
2126	CASE ( 'v"pt"' )
2127	dopr_index(i) = 61
2128	dopr_unit(i) = 'K m/s'
2129	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2130
2131	CASE ( 'vpt' )
2132	dopr_index(i) = 62
2133	dopr_unit(i) = 'K m/s'
2134	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2135
2136	CASE ( 'vpt_t' )
2137	dopr_index(i) = 63
2138	dopr_unit(i) = 'K m/s'
2139	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2140
2141	CASE ( 'rho' )
2142	IF ( .NOT. ocean ) THEN
2143	message_string = 'data_output_pr = ' // &
2144	TRIM( data_output_pr(i) ) // ' is not imp' // &
2145	'lemented for ocean = .FALSE.'
2146	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2147	ELSE
2148	dopr_index(i) = 64
2149	dopr_unit(i) = 'kg/m3'
2150	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2151	ENDIF
2152
2153	CASE ( 'w"sa"' )
2154	IF ( .NOT. ocean ) THEN
2155	message_string = 'data_output_pr = ' // &
2156	TRIM( data_output_pr(i) ) // ' is not imp' // &
2157	'lemented for ocean = .FALSE.'
2158	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2159	ELSE
2160	dopr_index(i) = 65
2161	dopr_unit(i) = 'psu m/s'
2162	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2163	ENDIF
2164
2165	CASE ( 'wsa' )
2166	IF ( .NOT. ocean ) THEN
2167	message_string = 'data_output_pr = ' // &
2168	TRIM( data_output_pr(i) ) // ' is not imp' // &
2169	'lemented for ocean = .FALSE.'
2170	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2171	ELSE
2172	dopr_index(i) = 66
2173	dopr_unit(i) = 'psu m/s'
2174	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2175	ENDIF
2176
2177	CASE ( 'wsa' )
2178	IF ( .NOT. ocean ) THEN
2179	message_string = 'data_output_pr = ' // &
2180	TRIM( data_output_pr(i) ) // ' is not imp' // &
2181	'lemented for ocean = .FALSE.'
2182	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2183	ELSE
2184	dopr_index(i) = 67
2185	dopr_unit(i) = 'psu m/s'
2186	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2187	ENDIF
2188
2189	CASE ( 'wp' )
2190	dopr_index(i) = 68
2191	dopr_unit(i) = 'm3/s3'
2192	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2193
2194	CASE ( 'w"e' )
2195	dopr_index(i) = 69
2196	dopr_unit(i) = 'm3/s3'
2197	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2198
2199	CASE ( 'q*2' )
2200	IF ( .NOT. humidity ) THEN
2201	message_string = 'data_output_pr = ' // &
2202	TRIM( data_output_pr(i) ) // ' is not imp' // &
2203	'lemented for humidity = .FALSE.'
2204	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2205	ELSE
2206	dopr_index(i) = 70
2207	dopr_unit(i) = 'kg2/kg2'
2208	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2209	ENDIF
2210
2211	CASE ( 'prho' )
2212	IF ( .NOT. ocean ) THEN
2213	message_string = 'data_output_pr = ' // &
2214	TRIM( data_output_pr(i) ) // ' is not imp' // &
2215	'lemented for ocean = .FALSE.'
2216	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2217	ELSE
2218	dopr_index(i) = 71
2219	dopr_unit(i) = 'kg/m3'
2220	hom(:,2,71,:) = SPREAD( zu, 2, statistic_regions+1 )
2221	ENDIF
2222
2223	CASE ( 'hyp' )
2224	dopr_index(i) = 72
2225	dopr_unit(i) = 'dbar'
2226	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2227
2228	CASE DEFAULT
2229
2230	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2231
2232	IF ( unit == 'illegal' ) THEN
2233	IF ( data_output_pr_user(1) /= ' ' ) THEN
2234	message_string = 'illegal value for data_output_pr or ' // &
2235	'data_output_pr_user = "' // &
2236	TRIM( data_output_pr(i) ) // '"'
2237	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2238	ELSE
2239	message_string = 'illegal value for data_output_pr = "' // &
2240	TRIM( data_output_pr(i) ) // '"'
2241	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2242	ENDIF
2243	ENDIF
2244
2245	END SELECT
2246	!
2247	!-- Check to which of the predefined coordinate systems the profile belongs
2248	DO k = 1, crmax
2249	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2250	/=0 ) &
2251	THEN
2252	dopr_crossindex(i) = k
2253	EXIT
2254	ENDIF
2255	ENDDO
2256	!
2257	!-- Generate the text for the labels of the PROFIL output file. "-characters
2258	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2259	!-- control characters
2260	dopr_label(i) = data_output_pr(i)
2261	position = INDEX( dopr_label(i) , '"' )
2262	DO WHILE ( position /= 0 )
2263	dopr_label(i)(position:position) = ''''
2264	position = INDEX( dopr_label(i) , '"' )
2265	ENDDO
2266
2267	ENDDO
2268
2269	!
2270	!-- y-value range of the coordinate system (PROFIL).
2271	!-- x-value range determined in plot_1d.
2272	IF ( .NOT. ocean ) THEN
2273	cross_uymin = 0.0
2274	IF ( z_max_do1d == -1.0 ) THEN
2275	cross_uymax = zu(nzt+1)
2276	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2277	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2278	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2279	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2280	ELSE
2281	cross_uymax = z_max_do1d
2282	ENDIF
2283	ENDIF
2284
2285	!
2286	!-- Check whether the chosen normalizing factor for the coordinate systems is
2287	!-- permissible
2288	DO i = 1, crmax
2289	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2290
2291	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2292	j = 0
2293
2294	CASE DEFAULT
2295	message_string = 'unknown normalization method cross_normali' // &
2296	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2297	'"'
2298	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2299
2300	END SELECT
2301	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2302
2303	CASE ( '', 'z_i' )
2304	j = 0
2305
2306	CASE DEFAULT
2307	message_string = 'unknown normalization method cross_normali' // &
2308	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2309	'"'
2310	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2311
2312	END SELECT
2313	ENDDO
2314	!
2315	!-- Check normalized y-value range of the coordinate system (PROFIL)
2316	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2317	THEN
2318	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2319	z_max_do1d_normalized, ' must be >= 0.0'
2320	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2321	ENDIF
2322
2323
2324	!
2325	!-- Append user-defined data output variables to the standard data output
2326	IF ( data_output_user(1) /= ' ' ) THEN
2327	i = 1
2328	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2329	i = i + 1
2330	ENDDO
2331	j = 1
2332	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2333	IF ( i > 100 ) THEN
2334	message_string = 'number of output quantitities given by data' // &
2335	'_output and data_output_user exceeds the limit of 100'
2336	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2337	ENDIF
2338	data_output(i) = data_output_user(j)
2339	i = i + 1
2340	j = j + 1
2341	ENDDO
2342	ENDIF
2343
2344	!
2345	!-- Check and set steering parameters for 2d/3d data output and averaging
2346	i = 1
2347	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2348	!
2349	!-- Check for data averaging
2350	ilen = LEN_TRIM( data_output(i) )
2351	j = 0 ! no data averaging
2352	IF ( ilen > 3 ) THEN
2353	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2354	j = 1 ! data averaging
2355	data_output(i) = data_output(i)(1:ilen-3)
2356	ENDIF
2357	ENDIF
2358	!
2359	!-- Check for cross section or volume data
2360	ilen = LEN_TRIM( data_output(i) )
2361	k = 0 ! 3d data
2362	var = data_output(i)(1:ilen)
2363	IF ( ilen > 3 ) THEN
2364	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2365	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2366	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2367	k = 1 ! 2d data
2368	var = data_output(i)(1:ilen-3)
2369	ENDIF
2370	ENDIF
2371	!
2372	!-- Check for allowed value and set units
2373	SELECT CASE ( TRIM( var ) )
2374
2375	CASE ( 'e' )
2376	IF ( constant_diffusion ) THEN
2377	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2378	'res constant_diffusion = .FALSE.'
2379	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2380	ENDIF
2381	unit = 'm2/s2'
2382
2383	CASE ( 'pc', 'pr' )
2384	IF ( .NOT. particle_advection ) THEN
2385	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2386	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2387	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2388	ENDIF
2389	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2390	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2391
2392	CASE ( 'q', 'vpt' )
2393	IF ( .NOT. humidity ) THEN
2394	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2395	'res humidity = .TRUE.'
2396	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2397	ENDIF
2398	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2399	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2400
2401	CASE ( 'ql' )
2402	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2403	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2404	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2405	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2406	ENDIF
2407	unit = 'kg/kg'
2408
2409	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2410	IF ( .NOT. cloud_droplets ) THEN
2411	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2412	'res cloud_droplets = .TRUE.'
2413	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2414	ENDIF
2415	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2416	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2417	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2418
2419	CASE ( 'qv' )
2420	IF ( .NOT. cloud_physics ) THEN
2421	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2422	'res cloud_physics = .TRUE.'
2423	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2424	ENDIF
2425	unit = 'kg/kg'
2426
2427	CASE ( 'rho' )
2428	IF ( .NOT. ocean ) THEN
2429	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2430	'res ocean = .TRUE.'
2431	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2432	ENDIF
2433	unit = 'kg/m3'
2434
2435	CASE ( 's' )
2436	IF ( .NOT. passive_scalar ) THEN
2437	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2438	'res passive_scalar = .TRUE.'
2439	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2440	ENDIF
2441	unit = 'conc'
2442
2443	CASE ( 'sa' )
2444	IF ( .NOT. ocean ) THEN
2445	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2446	'res ocean = .TRUE.'
2447	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2448	ENDIF
2449	unit = 'psu'
2450
2451	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'qsws', 'shf', 'z0' )
2452	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2453	message_string = 'illegal value for data_output: "' // &
2454	TRIM( var ) // '" & only 2d-horizontal ' // &
2455	'cross sections are allowed for this value'
2456	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2457	ENDIF
2458	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2459	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2460	'res cloud_physics = .TRUE.'
2461	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2462	ENDIF
2463	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2464	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2465	'res precipitation = .TRUE.'
2466	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2467	ENDIF
2468	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2469	message_string = 'temporal averaging of precipitation ' // &
2470	'amount "' // TRIM( var ) // '" is not possible'
2471	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2472	ENDIF
2473	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2474	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2475	'res precipitation = .TRUE.'
2476	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2477	ENDIF
2478	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2479	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2480	'res humidity = .TRUE.'
2481	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2482	ENDIF
2483
2484	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2485	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2486	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2487	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2488	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2489	IF ( TRIM( var ) == 't*' ) unit = 'K'
2490	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2491	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2492
2493
2494	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2495	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2496	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2497	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2498	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2499	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2500	CONTINUE
2501
2502	CASE DEFAULT
2503	CALL user_check_data_output( var, unit )
2504
2505	IF ( unit == 'illegal' ) THEN
2506	IF ( data_output_user(1) /= ' ' ) THEN
2507	message_string = 'illegal value for data_output or ' // &
2508	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2509	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2510	ELSE
2511	message_string = 'illegal value for data_output =' // &
2512	TRIM( data_output(i) ) // '"'
2513	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2514	ENDIF
2515	ENDIF
2516
2517	END SELECT
2518	!
2519	!-- Set the internal steering parameters appropriately
2520	IF ( k == 0 ) THEN
2521	do3d_no(j) = do3d_no(j) + 1
2522	do3d(j,do3d_no(j)) = data_output(i)
2523	do3d_unit(j,do3d_no(j)) = unit
2524	ELSE
2525	do2d_no(j) = do2d_no(j) + 1
2526	do2d(j,do2d_no(j)) = data_output(i)
2527	do2d_unit(j,do2d_no(j)) = unit
2528	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2529	data_output_xy(j) = .TRUE.
2530	ENDIF
2531	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2532	data_output_xz(j) = .TRUE.
2533	ENDIF
2534	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2535	data_output_yz(j) = .TRUE.
2536	ENDIF
2537	ENDIF
2538
2539	IF ( j == 1 ) THEN
2540	!
2541	!-- Check, if variable is already subject to averaging
2542	found = .FALSE.
2543	DO k = 1, doav_n
2544	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2545	ENDDO
2546
2547	IF ( .NOT. found ) THEN
2548	doav_n = doav_n + 1
2549	doav(doav_n) = var
2550	ENDIF
2551	ENDIF
2552
2553	i = i + 1
2554	ENDDO
2555
2556	!
2557	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2558	IF ( doav_n > 0 .AND. averaging_interval == 0.0 ) THEN
2559	WRITE( message_string, * ) 'output of averaged quantity "', &
2560	TRIM( doav(1) ), '_av" requires to set a ', &
2561	'non-zero & averaging interval'
2562	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2563	ENDIF
2564
2565	!
2566	!-- Check sectional planes and store them in one shared array
2567	IF ( ANY( section_xy > nz + 1 ) ) THEN
2568	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2569	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2570	ENDIF
2571	IF ( ANY( section_xz > ny + 1 ) ) THEN
2572	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2573	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2574	ENDIF
2575	IF ( ANY( section_yz > nx + 1 ) ) THEN
2576	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2577	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2578	ENDIF
2579	section(:,1) = section_xy
2580	section(:,2) = section_xz
2581	section(:,3) = section_yz
2582
2583	!
2584	!-- Upper plot limit (grid point value) for 1D profiles
2585	IF ( z_max_do1d == -1.0 ) THEN
2586	nz_do1d = nzt+1
2587	ELSE
2588	DO k = nzb+1, nzt+1
2589	nz_do1d = k
2590	IF ( zw(k) > z_max_do1d ) EXIT
2591	ENDDO
2592	ENDIF
2593
2594	!
2595	!-- Upper plot limit for 2D vertical sections
2596	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2597	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2598	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2599	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2600	' (zu(nzt))'
2601	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2602	ENDIF
2603
2604	!
2605	!-- Upper plot limit for 3D arrays
2606	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2607
2608	!
2609	!-- Determine and check accuracy for compressed 3D plot output
2610	IF ( do3d_compress ) THEN
2611	!
2612	!-- Compression only permissible on T3E machines
2613	IF ( host(1:3) /= 't3e' ) THEN
2614	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2615	TRIM( host ) // '"'
2616	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2617	ENDIF
2618
2619	i = 1
2620	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2621
2622	ilen = LEN_TRIM( do3d_comp_prec(i) )
2623	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2624	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2625	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2626	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2627	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2628	ENDIF
2629
2630	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2631	var = do3d_comp_prec(i)(1:ilen-1)
2632
2633	SELECT CASE ( var )
2634
2635	CASE ( 'u' )
2636	j = 1
2637	CASE ( 'v' )
2638	j = 2
2639	CASE ( 'w' )
2640	j = 3
2641	CASE ( 'p' )
2642	j = 4
2643	CASE ( 'pt' )
2644	j = 5
2645
2646	CASE DEFAULT
2647	WRITE( message_string, * ) 'unknown variable "', &
2648	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2649	i, ')'
2650	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2651
2652	END SELECT
2653
2654	plot_3d_precision(j)%precision = prec
2655	i = i + 1
2656
2657	ENDDO
2658	ENDIF
2659
2660	!
2661	!-- Check the data output format(s)
2662	IF ( data_output_format(1) == ' ' ) THEN
2663	!
2664	!-- Default value
2665	netcdf_output = .TRUE.
2666	ELSE
2667	i = 1
2668	DO WHILE ( data_output_format(i) /= ' ' )
2669
2670	SELECT CASE ( data_output_format(i) )
2671
2672	CASE ( 'netcdf' )
2673	netcdf_output = .TRUE.
2674	CASE ( 'iso2d' )
2675	iso2d_output = .TRUE.
2676	CASE ( 'profil' )
2677	profil_output = .TRUE.
2678	CASE ( 'avs' )
2679	avs_output = .TRUE.
2680
2681	CASE DEFAULT
2682	message_string = 'unknown value for data_output_format "' // &
2683	TRIM( data_output_format(i) ) // '"'
2684	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2685
2686	END SELECT
2687
2688	i = i + 1
2689	IF ( i > 10 ) EXIT
2690
2691	ENDDO
2692
2693	ENDIF
2694
2695	!
2696	!-- Check mask conditions
2697	DO mid = 1, max_masks
2698	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2699	data_output_masks_user(mid,1) /= ' ' ) THEN
2700	masks = masks + 1
2701	ENDIF
2702	ENDDO
2703
2704	IF ( masks < 0 .OR. masks > max_masks ) THEN
2705	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2706	'<= ', max_masks, ' (=max_masks)'
2707	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2708	ENDIF
2709	IF ( masks > 0 ) THEN
2710	mask_scale(1) = mask_scale_x
2711	mask_scale(2) = mask_scale_y
2712	mask_scale(3) = mask_scale_z
2713	IF ( ANY( mask_scale <= 0.0 ) ) THEN
2714	WRITE( message_string, * ) &
2715	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2716	'must be > 0.0'
2717	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2718	ENDIF
2719	!
2720	!-- Generate masks for masked data output
2721	CALL init_masks
2722	ENDIF
2723
2724	!
2725	!-- Check the NetCDF data format
2726	IF ( netcdf_data_format > 2 ) THEN
2727	#if defined( __netcdf4 )
2728	CONTINUE
2729	#else
2730	message_string = 'NetCDF: NetCDF4 format requested but no ' // &
2731	'cpp-directive __netcdf4 given & switch ' // &
2732	'back to 64-bit offset format'
2733	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2734	netcdf_data_format = 2
2735	#endif
2736	ENDIF
2737
2738	!
2739	!-- Check netcdf precison
2740	ldum = .FALSE.
2741	CALL define_netcdf_header( 'ch', ldum, 0 )
2742
2743	!
2744	!-- Check, whether a constant diffusion coefficient shall be used
2745	IF ( km_constant /= -1.0 ) THEN
2746	IF ( km_constant < 0.0 ) THEN
2747	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2748	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2749	ELSE
2750	IF ( prandtl_number < 0.0 ) THEN
2751	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2752	' < 0.0'
2753	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2754	ENDIF
2755	constant_diffusion = .TRUE.
2756
2757	IF ( prandtl_layer ) THEN
2758	message_string = 'prandtl_layer is not allowed with fixed ' // &
2759	'value of km'
2760	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2761	ENDIF
2762	ENDIF
2763	ENDIF
2764
2765	!
2766	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2767	!-- for the horizontal diffusivity used within the outflow damping layer,
2768	!-- and check/set the width of the damping layer
2769	IF ( bc_lr /= 'cyclic' ) THEN
2770	IF ( km_damp_max == -1.0 ) THEN
2771	km_damp_max = 0.5 * dx
2772	ENDIF
2773	IF ( outflow_damping_width == -1.0 ) THEN
2774	outflow_damping_width = MIN( 20, nx/2 )
2775	ENDIF
2776	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2777	message_string = 'outflow_damping width out of range'
2778	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2779	ENDIF
2780	ENDIF
2781
2782	IF ( bc_ns /= 'cyclic' ) THEN
2783	IF ( km_damp_max == -1.0 ) THEN
2784	km_damp_max = 0.5 * dy
2785	ENDIF
2786	IF ( outflow_damping_width == -1.0 ) THEN
2787	outflow_damping_width = MIN( 20, ny/2 )
2788	ENDIF
2789	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2790	message_string = 'outflow_damping width out of range'
2791	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2792	ENDIF
2793	ENDIF
2794
2795	!
2796	!-- Check value range for rif
2797	IF ( rif_min >= rif_max ) THEN
2798	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2799	'than rif_max = ', rif_max
2800	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2801	ENDIF
2802
2803	!
2804	!-- Determine upper and lower hight level indices for random perturbations
2805	IF ( disturbance_level_b == -9999999.9 ) THEN
2806	IF ( ocean ) THEN
2807	disturbance_level_b = zu((nzt*2)/3)
2808	disturbance_level_ind_b = ( nzt * 2 ) / 3
2809	ELSE
2810	disturbance_level_b = zu(nzb+3)
2811	disturbance_level_ind_b = nzb + 3
2812	ENDIF
2813	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2814	WRITE( message_string, * ) 'disturbance_level_b = ', &
2815	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2816	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2817	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2818	WRITE( message_string, * ) 'disturbance_level_b = ', &
2819	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2820	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2821	ELSE
2822	DO k = 3, nzt-2
2823	IF ( disturbance_level_b <= zu(k) ) THEN
2824	disturbance_level_ind_b = k
2825	EXIT
2826	ENDIF
2827	ENDDO
2828	ENDIF
2829
2830	IF ( disturbance_level_t == -9999999.9 ) THEN
2831	IF ( ocean ) THEN
2832	disturbance_level_t = zu(nzt-3)
2833	disturbance_level_ind_t = nzt - 3
2834	ELSE
2835	disturbance_level_t = zu(nzt/3)
2836	disturbance_level_ind_t = nzt / 3
2837	ENDIF
2838	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2839	WRITE( message_string, * ) 'disturbance_level_t = ', &
2840	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2841	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2842	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2843	WRITE( message_string, * ) 'disturbance_level_t = ', &
2844	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2845	disturbance_level_b
2846	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2847	ELSE
2848	DO k = 3, nzt-2
2849	IF ( disturbance_level_t <= zu(k) ) THEN
2850	disturbance_level_ind_t = k
2851	EXIT
2852	ENDIF
2853	ENDDO
2854	ENDIF
2855
2856	!
2857	!-- Check again whether the levels determined this way are ok.
2858	!-- Error may occur at automatic determination and too few grid points in
2859	!-- z-direction.
2860	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2861	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2862	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2863	disturbance_level_b
2864	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2865	ENDIF
2866
2867	!
2868	!-- Determine the horizontal index range for random perturbations.
2869	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2870	!-- near the inflow and the perturbation area is further limited to ...(1)
2871	!-- after the initial phase of the flow.
2872	dist_nxl = 0; dist_nxr = nx
2873	dist_nys = 0; dist_nyn = ny
2874	IF ( bc_lr /= 'cyclic' ) THEN
2875	IF ( inflow_disturbance_begin == -1 ) THEN
2876	inflow_disturbance_begin = MIN( 10, nx/2 )
2877	ENDIF
2878	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2879	THEN
2880	message_string = 'inflow_disturbance_begin out of range'
2881	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2882	ENDIF
2883	IF ( inflow_disturbance_end == -1 ) THEN
2884	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2885	ENDIF
2886	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2887	THEN
2888	message_string = 'inflow_disturbance_end out of range'
2889	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2890	ENDIF
2891	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2892	IF ( inflow_disturbance_begin == -1 ) THEN
2893	inflow_disturbance_begin = MIN( 10, ny/2 )
2894	ENDIF
2895	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2896	THEN
2897	message_string = 'inflow_disturbance_begin out of range'
2898	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2899	ENDIF
2900	IF ( inflow_disturbance_end == -1 ) THEN
2901	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2902	ENDIF
2903	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2904	THEN
2905	message_string = 'inflow_disturbance_end out of range'
2906	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2907	ENDIF
2908	ENDIF
2909
2910	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2911	dist_nxr = nx - inflow_disturbance_begin
2912	dist_nxl(1) = nx - inflow_disturbance_end
2913	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2914	dist_nxl = inflow_disturbance_begin
2915	dist_nxr(1) = inflow_disturbance_end
2916	ENDIF
2917	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2918	dist_nyn = ny - inflow_disturbance_begin
2919	dist_nys(1) = ny - inflow_disturbance_end
2920	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2921	dist_nys = inflow_disturbance_begin
2922	dist_nyn(1) = inflow_disturbance_end
2923	ENDIF
2924
2925	!
2926	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2927	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2928	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2929	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2930	'condition at the inflow boundary'
2931	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2932	ENDIF
2933
2934	!
2935	!-- In case of turbulent inflow calculate the index of the recycling plane
2936	IF ( turbulent_inflow ) THEN
2937	IF ( recycling_width == 9999999.9 ) THEN
2938	!
2939	!-- Set the default value for the width of the recycling domain
2940	recycling_width = 0.1 * nx * dx
2941	ELSE
2942	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2943	WRITE( message_string, * ) 'illegal value for recycling_width:', &
2944	' ', recycling_width
2945	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2946	ENDIF
2947	ENDIF
2948	!
2949	!-- Calculate the index
2950	recycling_plane = recycling_width / dx
2951	ENDIF
2952
2953	!
2954	!-- Check random generator
2955	IF ( random_generator /= 'system-specific' .AND. &
2956	random_generator /= 'numerical-recipes' ) THEN
2957	message_string = 'unknown random generator: random_generator = "' // &
2958	TRIM( random_generator ) // '"'
2959	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2960	ENDIF
2961
2962	!
2963	!-- Determine damping level index for 1D model
2964	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2965	IF ( damp_level_1d == -1.0 ) THEN
2966	damp_level_1d = zu(nzt+1)
2967	damp_level_ind_1d = nzt + 1
2968	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2969	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2970	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
2971	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
2972	ELSE
2973	DO k = 1, nzt+1
2974	IF ( damp_level_1d <= zu(k) ) THEN
2975	damp_level_ind_1d = k
2976	EXIT
2977	ENDIF
2978	ENDDO
2979	ENDIF
2980	ENDIF
2981
2982	!
2983	!-- Check some other 1d-model parameters
2984	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2985	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2986	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
2987	'" is unknown'
2988	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
2989	ENDIF
2990	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2991	TRIM( dissipation_1d ) /= 'detering' ) THEN
2992	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
2993	'" is unknown'
2994	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
2995	ENDIF
2996
2997	!
2998	!-- Set time for the next user defined restart (time_restart is the
2999	!-- internal parameter for steering restart events)
3000	IF ( restart_time /= 9999999.9 ) THEN
3001	IF ( restart_time > time_since_reference_point ) THEN
3002	time_restart = restart_time
3003	ENDIF
3004	ELSE
3005	!
3006	!-- In case of a restart run, set internal parameter to default (no restart)
3007	!-- if the NAMELIST-parameter restart_time is omitted
3008	time_restart = 9999999.9
3009	ENDIF
3010
3011	!
3012	!-- Set default value of the time needed to terminate a model run
3013	IF ( termination_time_needed == -1.0 ) THEN
3014	IF ( host(1:3) == 'ibm' ) THEN
3015	termination_time_needed = 300.0
3016	ELSE
3017	termination_time_needed = 35.0
3018	ENDIF
3019	ENDIF
3020
3021	!
3022	!-- Check the time needed to terminate a model run
3023	IF ( host(1:3) == 't3e' ) THEN
3024	!
3025	!-- Time needed must be at least 30 seconds on all CRAY machines, because
3026	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
3027	IF ( termination_time_needed <= 30.0 ) THEN
3028	WRITE( message_string, * ) 'termination_time_needed = ', &
3029	termination_time_needed, ' must be > 30.0 on host "', &
3030	TRIM( host ), '"'
3031	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
3032	ENDIF
3033	ELSEIF ( host(1:3) == 'ibm' ) THEN
3034	!
3035	!-- On IBM-regatta machines the time should be at least 300 seconds,
3036	!-- because the job time consumed before executing palm (for compiling,
3037	!-- copying of files, etc.) has to be regarded
3038	IF ( termination_time_needed < 300.0 ) THEN
3039	WRITE( message_string, * ) 'termination_time_needed = ', &
3040	termination_time_needed, ' should be >= 300.0 on host "', &
3041	TRIM( host ), '"'
3042	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
3043	ENDIF
3044	ENDIF
3045
3046	!
3047	!-- Check pressure gradient conditions
3048	IF ( dp_external .AND. conserve_volume_flow ) THEN
3049	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3050	'w are .TRUE. but one of them must be .FALSE.'
3051	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3052	ENDIF
3053	IF ( dp_external ) THEN
3054	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3055	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3056	' of range'
3057	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3058	ENDIF
3059	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
3060	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3061	'ro, i.e. the external pressure gradient & will not be applied'
3062	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3063	ENDIF
3064	ENDIF
3065	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
3066	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3067	'.FALSE., i.e. the external pressure gradient & will not be applied'
3068	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3069	ENDIF
3070	IF ( conserve_volume_flow ) THEN
3071	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3072	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
3073	conserve_volume_flow_mode = 'inflow_profile'
3074	ELSE
3075	conserve_volume_flow_mode = 'initial_profiles'
3076	ENDIF
3077	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3078	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
3079	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3080	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3081	conserve_volume_flow_mode
3082	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3083	ENDIF
3084	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
3085	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
3086	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
3087	'require & conserve_volume_flow_mode = ''inflow_profile'''
3088	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3089	ENDIF
3090	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
3091	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
3092	WRITE( message_string, * ) 'cyclic boundary conditions ', &
3093	'require & conserve_volume_flow_mode = ''initial_profiles''', &
3094	' or ''bulk_velocity'''
3095	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
3096	ENDIF
3097	ENDIF
3098	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
3099	( .NOT. conserve_volume_flow .OR. &
3100	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3101	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3102	'conserve_volume_flow = .T. and & ', &
3103	'conserve_volume_flow_mode = ''bulk_velocity'''
3104	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3105	ENDIF
3106
3107	!
3108	!-- Check particle attributes
3109	IF ( particle_color /= 'none' ) THEN
3110	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
3111	particle_color /= 'z' ) THEN
3112	message_string = 'illegal value for parameter particle_color: ' // &
3113	TRIM( particle_color)
3114	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
3115	ELSE
3116	IF ( color_interval(2) <= color_interval(1) ) THEN
3117	message_string = 'color_interval(2) <= color_interval(1)'
3118	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
3119	ENDIF
3120	ENDIF
3121	ENDIF
3122
3123	IF ( particle_dvrpsize /= 'none' ) THEN
3124	IF ( particle_dvrpsize /= 'absw' ) THEN
3125	message_string = 'illegal value for parameter particle_dvrpsize:' // &
3126	' ' // TRIM( particle_color)
3127	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
3128	ELSE
3129	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
3130	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
3131	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
3132	ENDIF
3133	ENDIF
3134	ENDIF
3135
3136	!
3137	!-- Check &userpar parameters
3138	CALL user_check_parameters
3139
3140
3141	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |