Home

Context Navigation

check_parameters.f90 @ 4394

Last change on this file since 4394 was 4392, checked in by pavelkrc, 5 years ago

Merge branch resler (updated documentation, optional flux tracing, bugfix)

Property svn:keywords set to Id

Property svn:mergeinfo set to False

/palm/branches/chemistry/SOURCE/check_parameters.f90	2047-3190,3218-3297
/palm/branches/forwind/SOURCE/check_parameters.f90	1564-1913
/palm/branches/mosaik_M2/check_parameters.f90	2360-3471
/palm/branches/palm4u/SOURCE/check_parameters.f90	2540-2692
/palm/branches/rans/SOURCE/check_parameters.f90	2078-3128
/palm/branches/resler/SOURCE/check_parameters.f90	2023-4391
/palm/branches/salsa/SOURCE/check_parameters.f90	2503-3581

File size: 140.7 KB

Line
1	!> @file check_parameters.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2020 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: check_parameters.f90 4392 2020-01-31 16:14:57Z maronga $
27	! Some error numbers revised to prevent double usage
28	!
29	! 11:55:33Z oliver.maas
30	! Checks for closed channel flow implemented
31	!
32	! 11:55:33Z oliver.maas
33	! Move 2-m potential temperature output to diagnostic_output_quantities
34	!
35	! 11:55:33Z oliver.maas
36	! removed message PA0421, concerning old parameter recycling_yshift
37	!
38	! 11:55:33Z oliver.maas
39	! adjust message to the modified parameter recycling_yshift
40	!
41	! 11:55:33Z oliver.maas
42	! Check if a cross section is specified if any output cross-section quantity
43	! is given
44	!
45	! 11:55:33Z oliver.maas
46	! Overwrite rotation_angle from namelist by value from static driver
47	!
48	! 11:55:33Z oliver.maas
49	! removed conversion from recycle_absolute_quantities to raq, added check and
50	! error message for correct input of recycling_method_for_thermodynamic_quantities
51	!
52	! 11:55:33Z oliver.maas
53	! Corrected "Former revisions" section
54	!
55	! 11:55:33Z oliver.maas
56	! bugfix error message: replaced PA184 by PA0184
57	!
58	! 11:55:33Z oliver.maas
59	! added conversion from recycle_absolute_quantities to raq for recycling of
60	! absolute quantities and added error message PA184 for not implemented quantities
61	!
62	! 4142 2019-08-05 12:38:31Z suehring
63	! Consider spinup in number of output timesteps for averaged 2D output (merge
64	! from branch resler).
65	!
66	! 4069 2019-07-01 14:05:51Z Giersch
67	! Masked output running index mid has been introduced as a local variable to
68	! avoid runtime error (Loop variable has been modified) in time_integration
69	!
70	! 4048 2019-06-21 21:00:21Z knoop
71	! Moved tcm_check_data_output to module_interface
72	!
73	! 4039 2019-06-18 10:32:41Z suehring
74	! Modularize diagnostic output
75	!
76	! 4017 2019-06-06 12:16:46Z schwenkel
77	! output of turbulence intensity added
78	!
79	! 3933 2019-04-25 12:33:20Z kanani
80	! Alphabetical resorting in CASE, condense settings for theta_2m* into one IF clause
81	!
82	! 3885 2019-04-11 11:29:34Z kanani
83	! Changes related to global restructuring of location messages and introduction
84	! of additional debug messages
85	!
86	! 3766 2019-02-26 16:23:41Z raasch
87	! trim added to avoid truncation compiler warnings
88	!
89	! 3761 2019-02-25 15:31:42Z raasch
90	! unused variables removed
91	!
92	! 3735 2019-02-12 09:52:40Z dom_dwd_user
93	! Passing variable j (averaged output?) to
94	! module_interface.f90:chem_check_data_output.
95	!
96	! 3705 2019-01-29 19:56:39Z suehring
97	! bugfix: renamed thetav_t to vtheta_t
98	!
99	! 3702 2019-01-28 13:19:30Z gronemeier
100	! most_method removed
101	!
102	! 3655 2019-01-07 16:51:22Z knoop
103	! Formatting
104	!
105	! Revision 1.1 1997/08/26 06:29:23 raasch
106	! Initial revision
107	!
108	!
109	! Description:
110	! ------------
111	!> Check control parameters and deduce further quantities.
112	!------------------------------------------------------------------------------!
113	SUBROUTINE check_parameters
114
115
116	USE arrays_3d
117
118	USE basic_constants_and_equations_mod
119
120	USE bulk_cloud_model_mod, &
121	ONLY: bulk_cloud_model
122
123	USE chem_modules
124
125	USE chemistry_model_mod, &
126	ONLY: chem_boundary_conds
127
128	USE control_parameters
129
130	USE grid_variables
131
132	USE kinds
133
134	USE indices
135
136	USE model_1d_mod, &
137	ONLY: damp_level_1d, damp_level_ind_1d
138
139	USE module_interface, &
140	ONLY: module_interface_check_parameters, &
141	module_interface_check_data_output_ts, &
142	module_interface_check_data_output_pr, &
143	module_interface_check_data_output
144
145	USE netcdf_data_input_mod, &
146	ONLY: init_model, input_pids_static, netcdf_data_input_check_dynamic, &
147	netcdf_data_input_check_static
148
149	USE netcdf_interface, &
150	ONLY: dopr_unit, do2d_unit, do3d_unit, netcdf_data_format, &
151	netcdf_data_format_string, dots_unit, heatflux_output_unit, &
152	waterflux_output_unit, momentumflux_output_unit, &
153	dots_max, dots_num, dots_label
154
155	USE particle_attributes, &
156	ONLY: particle_advection, use_sgs_for_particles
157
158	USE pegrid
159
160	USE pmc_interface, &
161	ONLY: cpl_id, nested_run
162
163	USE profil_parameter
164
165	USE statistics
166
167	USE subsidence_mod
168
169	USE transpose_indices
170
171	USE vertical_nesting_mod, &
172	ONLY: vnested, &
173	vnest_check_parameters
174
175
176	IMPLICIT NONE
177
178	CHARACTER (LEN=varnamelength) :: var !< variable name
179	CHARACTER (LEN=7) :: unit !< unit of variable
180	CHARACTER (LEN=8) :: date !< current date string
181	CHARACTER (LEN=10) :: time !< current time string
182	CHARACTER (LEN=20) :: ensemble_string !< string containing number of ensemble member
183	CHARACTER (LEN=15) :: nest_string !< string containing id of nested domain
184	CHARACTER (LEN=40) :: coupling_string !< string containing type of coupling
185	CHARACTER (LEN=100) :: action !< flag string
186
187	INTEGER(iwp) :: i !< loop index
188	INTEGER(iwp) :: ilen !< string length
189	INTEGER(iwp) :: j !< loop index
190	INTEGER(iwp) :: k !< loop index
191	INTEGER(iwp) :: kk !< loop index
192	INTEGER(iwp) :: mid !< masked output running index
193	INTEGER(iwp) :: netcdf_data_format_save !< initial value of netcdf_data_format
194	INTEGER(iwp) :: position !< index position of string
195
196	LOGICAL :: found !< flag, true if output variable is already marked for averaging
197
198	REAL(wp) :: dt_spinup_max !< maximum spinup timestep in nested domains
199	REAL(wp) :: gradient !< local gradient
200	REAL(wp) :: remote = 0.0_wp !< MPI id of remote processor
201	REAL(wp) :: spinup_time_max !< maximum spinup time in nested domains
202	REAL(wp) :: time_to_be_simulated_from_reference_point !< time to be simulated from reference point
203
204
205	CALL location_message( 'checking parameters', 'start' )
206	!
207	!-- At first, check static and dynamic input for consistency
208	CALL netcdf_data_input_check_dynamic
209	CALL netcdf_data_input_check_static
210	!
211	!-- Check for overlap combinations, which are not realized yet
212	IF ( transpose_compute_overlap .AND. numprocs == 1 ) THEN
213	message_string = 'transpose-compute-overlap not implemented for single PE runs'
214	CALL message( 'check_parameters', 'PA0000', 1, 2, 0, 6, 0 )
215	ENDIF
216
217	!
218	!-- Check the coupling mode
219	IF ( coupling_mode /= 'uncoupled' .AND. &
220	coupling_mode /= 'precursor_atmos' .AND. &
221	coupling_mode /= 'precursor_ocean' .AND. &
222	coupling_mode /= 'vnested_crse' .AND. &
223	coupling_mode /= 'vnested_fine' .AND. &
224	coupling_mode /= 'atmosphere_to_ocean' .AND. &
225	coupling_mode /= 'ocean_to_atmosphere' ) THEN
226	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
227	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
228	ENDIF
229
230	!
231	!-- Check if humidity is set to TRUE in case of the atmospheric run (for coupled runs)
232	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. .NOT. humidity) THEN
233	message_string = ' Humidity has to be set to .T. in the _p3d file ' // &
234	'for coupled runs between ocean and atmosphere.'
235	CALL message( 'check_parameters', 'PA0476', 1, 2, 0, 6, 0 )
236	ENDIF
237
238	!
239	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
240	IF ( coupling_mode /= 'uncoupled' .AND. &
241	coupling_mode(1:8) /= 'vnested_' .AND. &
242	coupling_mode /= 'precursor_atmos' .AND. &
243	coupling_mode /= 'precursor_ocean' ) THEN
244
245	IF ( dt_coupling == 9999999.9_wp ) THEN
246	message_string = 'dt_coupling is not set but required for coup' // &
247	'ling mode "' // TRIM( coupling_mode ) // '"'
248	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
249	ENDIF
250
251	#if defined( __parallel )
252
253
254	IF ( myid == 0 ) THEN
255	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
256	ierr )
257	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
258	status, ierr )
259	ENDIF
260	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
261
262	IF ( dt_coupling /= remote ) THEN
263	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
264	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
265	'dt_coupling_remote = ', remote
266	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
267	ENDIF
268	IF ( dt_coupling <= 0.0_wp ) THEN
269
270	IF ( myid == 0 ) THEN
271	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
272	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
273	status, ierr )
274	ENDIF
275	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
276
277	dt_coupling = MAX( dt_max, remote )
278	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
279	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
280	'MAX(dt_max(A,O)) = ', dt_coupling
281	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
282	ENDIF
283
284	IF ( myid == 0 ) THEN
285	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
286	ierr )
287	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
288	status, ierr )
289	ENDIF
290	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
291
292	IF ( restart_time /= remote ) THEN
293	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
294	'": restart_time = ', restart_time, '& is not equal to ', &
295	'restart_time_remote = ', remote
296	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
297	ENDIF
298
299	IF ( myid == 0 ) THEN
300	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
301	ierr )
302	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
303	status, ierr )
304	ENDIF
305	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
306
307	IF ( dt_restart /= remote ) THEN
308	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
309	'": dt_restart = ', dt_restart, '& is not equal to ', &
310	'dt_restart_remote = ', remote
311	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
312	ENDIF
313
314	time_to_be_simulated_from_reference_point = end_time-coupling_start_time
315
316	IF ( myid == 0 ) THEN
317	CALL MPI_SEND( time_to_be_simulated_from_reference_point, 1, &
318	MPI_REAL, target_id, 14, comm_inter, ierr )
319	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
320	status, ierr )
321	ENDIF
322	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
323
324	IF ( time_to_be_simulated_from_reference_point /= remote ) THEN
325	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
326	'": time_to_be_simulated_from_reference_point = ', &
327	time_to_be_simulated_from_reference_point, '& is not equal ', &
328	'to time_to_be_simulated_from_reference_point_remote = ', &
329	remote
330	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
331	ENDIF
332
333	IF ( myid == 0 ) THEN
334	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
335	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
336	status, ierr )
337	ENDIF
338	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
339
340
341	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
342
343	IF ( dx < remote ) THEN
344	WRITE( message_string, * ) 'coupling mode "', &
345	TRIM( coupling_mode ), &
346	'": dx in Atmosphere is not equal to or not larger than dx in ocean'
347	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
348	ENDIF
349
350	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
351	WRITE( message_string, * ) 'coupling mode "', &
352	TRIM( coupling_mode ), &
353	'": Domain size in x-direction is not equal in ocean and atmosphere'
354	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
355	ENDIF
356
357	ENDIF
358
359	IF ( myid == 0) THEN
360	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
361	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
362	status, ierr )
363	ENDIF
364	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
365
366	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
367
368	IF ( dy < remote ) THEN
369	WRITE( message_string, * ) 'coupling mode "', &
370	TRIM( coupling_mode ), &
371	'": dy in Atmosphere is not equal to or not larger than dy in ocean'
372	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
373	ENDIF
374
375	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
376	WRITE( message_string, * ) 'coupling mode "', &
377	TRIM( coupling_mode ), &
378	'": Domain size in y-direction is not equal in ocean and atmosphere'
379	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
380	ENDIF
381
382	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
383	WRITE( message_string, * ) 'coupling mode "', &
384	TRIM( coupling_mode ), &
385	'": nx+1 in ocean is not divisible by nx+1 in', &
386	' atmosphere without remainder'
387	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
388	ENDIF
389
390	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
391	WRITE( message_string, * ) 'coupling mode "', &
392	TRIM( coupling_mode ), &
393	'": ny+1 in ocean is not divisible by ny+1 in', &
394	' atmosphere without remainder'
395
396	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
397	ENDIF
398
399	ENDIF
400	#else
401	WRITE( message_string, * ) 'coupling requires PALM to be compiled with',&
402	' cpp-option "-D__parallel"'
403	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
404	#endif
405	ENDIF
406
407	#if defined( __parallel )
408	!
409	!-- Exchange via intercommunicator
410	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
411	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
412	ierr )
413	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
414	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
415	comm_inter, status, ierr )
416	ENDIF
417	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
418
419	#endif
420
421	!
422	!-- User settings for restart times requires that "restart" has been given as
423	!-- file activation string. Otherwise, binary output would not be saved by
424	!-- palmrun.
425	IF ( ( restart_time /= 9999999.9_wp .OR. dt_restart /= 9999999.9_wp ) &
426	.AND. .NOT. write_binary ) THEN
427	WRITE( message_string, * ) 'manual restart settings requires file ', &
428	'activation string "restart"'
429	CALL message( 'check_parameters', 'PA0001', 1, 2, 0, 6, 0 )
430	ENDIF
431
432
433	!
434	!-- Generate the file header which is used as a header for most of PALM's
435	!-- output files
436	CALL DATE_AND_TIME( date, time, run_zone )
437	run_date = date(1:4)//'-'//date(5:6)//'-'//date(7:8)
438	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
439	IF ( coupling_mode == 'uncoupled' ) THEN
440	coupling_string = ''
441	ELSEIF ( coupling_mode == 'vnested_crse' ) THEN
442	coupling_string = ' nested (coarse)'
443	ELSEIF ( coupling_mode == 'vnested_fine' ) THEN
444	coupling_string = ' nested (fine)'
445	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
446	coupling_string = ' coupled (atmosphere)'
447	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
448	coupling_string = ' coupled (ocean)'
449	ENDIF
450	IF ( ensemble_member_nr /= 0 ) THEN
451	WRITE( ensemble_string, '(2X,A,I2.2)' ) 'en-no: ', ensemble_member_nr
452	ELSE
453	ensemble_string = ''
454	ENDIF
455	IF ( nested_run ) THEN
456	WRITE( nest_string, '(2X,A,I2.2)' ) 'nest-id: ', cpl_id
457	ELSE
458	nest_string = ''
459	ENDIF
460
461	WRITE ( run_description_header, &
462	'(A,2X,A,2X,A,A,A,I2.2,A,A,A,2X,A,A,2X,A,1X,A)' ) &
463	TRIM( version ), TRIM( revision ), 'run: ', &
464	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
465	TRIM( nest_string ), TRIM( ensemble_string), 'host: ', TRIM( host ), &
466	run_date, run_time
467
468	!
469	!-- Check the general loop optimization method
470	SELECT CASE ( TRIM( loop_optimization ) )
471
472	CASE ( 'cache', 'vector' )
473	CONTINUE
474
475	CASE DEFAULT
476	message_string = 'illegal value given for loop_optimization: "' // &
477	TRIM( loop_optimization ) // '"'
478	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
479
480	END SELECT
481
482	!
483	!-- Check topography setting (check for illegal parameter combinations)
484	IF ( topography /= 'flat' ) THEN
485	action = ' '
486	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' &
487	) THEN
488	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
489	ENDIF
490	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' )&
491	THEN
492	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
493	ENDIF
494	IF ( psolver == 'sor' ) THEN
495	WRITE( action, '(A,A)' ) 'psolver = ', psolver
496	ENDIF
497	IF ( sloping_surface ) THEN
498	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
499	ENDIF
500	IF ( galilei_transformation ) THEN
501	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
502	ENDIF
503	IF ( cloud_droplets ) THEN
504	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
505	ENDIF
506	IF ( .NOT. constant_flux_layer .AND. topography /= 'closed_channel' ) &
507	THEN
508	WRITE( action, '(A)' ) 'constant_flux_layer = .FALSE.'
509	ENDIF
510	IF ( action /= ' ' ) THEN
511	message_string = 'The specified topography does not allow ' // &
512	TRIM( action )
513	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
514	ENDIF
515	!
516	!-- Check illegal/untested parameter combinations for closed channel
517	If ( topography == 'closed_channel' ) THEN
518	symmetry_flag = 1
519	message_string = 'Bottom and top boundary are treated equal'
520	CALL message( 'check_parameters', 'PA0699', 0, 0, 0, 6, 0 )
521
522	IF ( dz(1) /= dz(COUNT( dz /= -1.0_wp )) .OR. &
523	dz_stretch_level /= -9999999.9_wp) THEN
524	WRITE( message_string, * ) 'dz should be equal close to the ' // &
525	'boundaries due to symmetrical problem'
526	CALL message( 'check_parameters', 'PA0700', 1, 2, 0, 6, 0 )
527	ENDIF
528
529	IF ( constant_flux_layer ) THEN
530	WRITE( message_string, * ) 'A constant flux layer is not '// &
531	'allowed if a closed channel '// &
532	'shall be used'
533	CALL message( 'check_parameters', 'PA0701', 1, 2, 0, 6, 0 )
534	ENDIF
535
536	IF ( ocean_mode ) THEN
537	WRITE( message_string, * ) 'The ocean mode is not allowed if '// &
538	'a closed channel shall be used'
539	CALL message( 'check_parameters', 'PA0702', 1, 2, 0, 6, 0 )
540	ENDIF
541
542	IF ( momentum_advec /= 'ws-scheme' .OR. &
543	scalar_advec /= 'ws-scheme' ) THEN
544	WRITE( message_string, * ) 'A closed channel require the '// &
545	'upwind scheme of Wicker and ' // &
546	'Skamarock as the advection scheme'
547	CALL message( 'check_parameters', 'PA0703', 1, 2, 0, 6, 0 )
548	ENDIF
549	ENDIF
550	ENDIF
551
552	!
553	!-- Check approximation
554	IF ( TRIM( approximation ) /= 'boussinesq' .AND. &
555	TRIM( approximation ) /= 'anelastic' ) THEN
556	message_string = 'unknown approximation: approximation = "' // &
557	TRIM( approximation ) // '"'
558	CALL message( 'check_parameters', 'PA0446', 1, 2, 0, 6, 0 )
559	ENDIF
560
561	!
562	!-- Check approximation requirements
563	IF ( TRIM( approximation ) == 'anelastic' .AND. &
564	TRIM( momentum_advec ) /= 'ws-scheme' ) THEN
565	message_string = 'Anelastic approximation requires ' // &
566	'momentum_advec = "ws-scheme"'
567	CALL message( 'check_parameters', 'PA0447', 1, 2, 0, 6, 0 )
568	ENDIF
569	IF ( TRIM( approximation ) == 'anelastic' .AND. &
570	TRIM( psolver ) == 'multigrid' ) THEN
571	message_string = 'Anelastic approximation currently only supports ' // &
572	'psolver = "poisfft", ' // &
573	'psolver = "sor" and ' // &
574	'psolver = "multigrid_noopt"'
575	CALL message( 'check_parameters', 'PA0448', 1, 2, 0, 6, 0 )
576	ENDIF
577	IF ( TRIM( approximation ) == 'anelastic' .AND. &
578	conserve_volume_flow ) THEN
579	message_string = 'Anelastic approximation is not allowed with ' // &
580	'conserve_volume_flow = .TRUE.'
581	CALL message( 'check_parameters', 'PA0449', 1, 2, 0, 6, 0 )
582	ENDIF
583
584	!
585	!-- Check flux input mode
586	IF ( TRIM( flux_input_mode ) /= 'dynamic' .AND. &
587	TRIM( flux_input_mode ) /= 'kinematic' .AND. &
588	TRIM( flux_input_mode ) /= 'approximation-specific' ) THEN
589	message_string = 'unknown flux input mode: flux_input_mode = "' // &
590	TRIM( flux_input_mode ) // '"'
591	CALL message( 'check_parameters', 'PA0450', 1, 2, 0, 6, 0 )
592	ENDIF
593	!
594	!-- Set flux input mode according to approximation if applicable
595	IF ( TRIM( flux_input_mode ) == 'approximation-specific' ) THEN
596	IF ( TRIM( approximation ) == 'anelastic' ) THEN
597	flux_input_mode = 'dynamic'
598	ELSEIF ( TRIM( approximation ) == 'boussinesq' ) THEN
599	flux_input_mode = 'kinematic'
600	ENDIF
601	ENDIF
602
603	!
604	!-- Check flux output mode
605	IF ( TRIM( flux_output_mode ) /= 'dynamic' .AND. &
606	TRIM( flux_output_mode ) /= 'kinematic' .AND. &
607	TRIM( flux_output_mode ) /= 'approximation-specific' ) THEN
608	message_string = 'unknown flux output mode: flux_output_mode = "' // &
609	TRIM( flux_output_mode ) // '"'
610	CALL message( 'check_parameters', 'PA0451', 1, 2, 0, 6, 0 )
611	ENDIF
612	!
613	!-- Set flux output mode according to approximation if applicable
614	IF ( TRIM( flux_output_mode ) == 'approximation-specific' ) THEN
615	IF ( TRIM( approximation ) == 'anelastic' ) THEN
616	flux_output_mode = 'dynamic'
617	ELSEIF ( TRIM( approximation ) == 'boussinesq' ) THEN
618	flux_output_mode = 'kinematic'
619	ENDIF
620	ENDIF
621
622
623	!
624	!-- When the land- or urban-surface model is used, the flux output must be
625	!-- dynamic.
626	IF ( land_surface .OR. urban_surface ) THEN
627	flux_output_mode = 'dynamic'
628	ENDIF
629
630	!
631	!-- Set the flux output units according to flux_output_mode
632	IF ( TRIM( flux_output_mode ) == 'kinematic' ) THEN
633	heatflux_output_unit = 'K m/s'
634	waterflux_output_unit = 'kg/kg m/s'
635	momentumflux_output_unit = 'm2/s2'
636	ELSEIF ( TRIM( flux_output_mode ) == 'dynamic' ) THEN
637	heatflux_output_unit = 'W/m2'
638	waterflux_output_unit = 'W/m2'
639	momentumflux_output_unit = 'N/m2'
640	ENDIF
641
642	!
643	!-- set time series output units for fluxes
644	dots_unit(14:16) = TRIM( heatflux_output_unit )
645	dots_unit(21) = TRIM( waterflux_output_unit )
646	dots_unit(19:20) = TRIM( momentumflux_output_unit )
647
648	!
649	!-- Add other module specific timeseries
650	CALL module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
651
652	!
653	!-- Check if maximum number of allowed timeseries is exceeded
654	IF ( dots_num > dots_max ) THEN
655	WRITE( message_string, * ) 'number of time series quantities exceeds', &
656	' its maximum of dots_max = ', dots_max, &
657	'&Please increase dots_max in modules.f90.'
658	CALL message( 'init_3d_model', 'PA0194', 1, 2, 0, 6, 0 )
659	ENDIF
660
661	!
662	!-- Check whether there are any illegal values
663	!-- Pressure solver:
664	IF ( psolver /= 'poisfft' .AND. psolver /= 'sor' .AND. &
665	psolver /= 'multigrid' .AND. psolver /= 'multigrid_noopt' ) THEN
666	message_string = 'unknown solver for perturbation pressure: psolver' // &
667	' = "' // TRIM( psolver ) // '"'
668	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
669	ENDIF
670
671	IF ( psolver(1:9) == 'multigrid' ) THEN
672	IF ( cycle_mg == 'w' ) THEN
673	gamma_mg = 2
674	ELSEIF ( cycle_mg == 'v' ) THEN
675	gamma_mg = 1
676	ELSE
677	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
678	TRIM( cycle_mg ) // '"'
679	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
680	ENDIF
681	ENDIF
682
683	IF ( fft_method /= 'singleton-algorithm' .AND. &
684	fft_method /= 'temperton-algorithm' .AND. &
685	fft_method /= 'fftw' .AND. &
686	fft_method /= 'system-specific' ) THEN
687	message_string = 'unknown fft-algorithm: fft_method = "' // &
688	TRIM( fft_method ) // '"'
689	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
690	ENDIF
691
692	IF( momentum_advec == 'ws-scheme' .AND. &
693	.NOT. call_psolver_at_all_substeps ) THEN
694	message_string = 'psolver must be called at each RK3 substep when "'// &
695	TRIM(momentum_advec) // ' "is used for momentum_advec'
696	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
697	END IF
698	!
699	!-- Advection schemes:
700	IF ( momentum_advec /= 'pw-scheme' .AND. &
701	momentum_advec /= 'ws-scheme' .AND. &
702	momentum_advec /= 'up-scheme' ) &
703	THEN
704	message_string = 'unknown advection scheme: momentum_advec = "' // &
705	TRIM( momentum_advec ) // '"'
706	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
707	ENDIF
708	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
709	.AND. ( timestep_scheme == 'euler' .OR. &
710	timestep_scheme == 'runge-kutta-2' ) ) &
711	THEN
712	message_string = 'momentum_advec or scalar_advec = "' &
713	// TRIM( momentum_advec ) // '" is not allowed with ' // &
714	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
715	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
716	ENDIF
717	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
718	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'up-scheme' ) &
719	THEN
720	message_string = 'unknown advection scheme: scalar_advec = "' // &
721	TRIM( scalar_advec ) // '"'
722	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
723	ENDIF
724	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
725	THEN
726	message_string = 'advection_scheme scalar_advec = "' &
727	// TRIM( scalar_advec ) // '" not implemented for ' // &
728	'loop_optimization = "' // TRIM( loop_optimization ) // '"'
729	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
730	ENDIF
731
732	IF ( use_sgs_for_particles .AND. .NOT. cloud_droplets .AND. &
733	.NOT. use_upstream_for_tke .AND. &
734	scalar_advec /= 'ws-scheme' &
735	) THEN
736	use_upstream_for_tke = .TRUE.
737	message_string = 'use_upstream_for_tke is set to .TRUE. because ' // &
738	'use_sgs_for_particles = .TRUE. ' // &
739	'and scalar_advec /= ws-scheme'
740	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
741	ENDIF
742
743	!
744	!-- Set LOGICAL switches to enhance performance
745	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
746	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
747
748
749	!
750	!-- Timestep schemes:
751	SELECT CASE ( TRIM( timestep_scheme ) )
752
753	CASE ( 'euler' )
754	intermediate_timestep_count_max = 1
755
756	CASE ( 'runge-kutta-2' )
757	intermediate_timestep_count_max = 2
758
759	CASE ( 'runge-kutta-3' )
760	intermediate_timestep_count_max = 3
761
762	CASE DEFAULT
763	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
764	TRIM( timestep_scheme ) // '"'
765	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
766
767	END SELECT
768
769	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
770	.AND. timestep_scheme(1:5) == 'runge' ) THEN
771	message_string = 'momentum advection scheme "' // &
772	TRIM( momentum_advec ) // '" & does not work with ' // &
773	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
774	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
775	ENDIF
776	!
777	!-- Check for proper settings for microphysics
778	IF ( bulk_cloud_model .AND. cloud_droplets ) THEN
779	message_string = 'bulk_cloud_model = .TRUE. is not allowed with ' // &
780	'cloud_droplets = .TRUE.'
781	CALL message( 'check_parameters', 'PA0442', 1, 2, 0, 6, 0 )
782	ENDIF
783
784	!
785	!-- Initializing actions must have been set by the user
786	IF ( TRIM( initializing_actions ) == '' ) THEN
787	message_string = 'no value specified for initializing_actions'
788	CALL message( 'check_parameters', 'PA0149', 1, 2, 0, 6, 0 )
789	ENDIF
790
791	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
792	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
793	!
794	!-- No restart run: several initialising actions are possible
795	action = initializing_actions
796	DO WHILE ( TRIM( action ) /= '' )
797	position = INDEX( action, ' ' )
798	SELECT CASE ( action(1:position-1) )
799
800	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
801	'by_user', 'initialize_vortex', 'initialize_ptanom', &
802	'initialize_bubble', 'inifor' )
803	action = action(position+1:)
804
805	CASE DEFAULT
806	message_string = 'initializing_action = "' // &
807	TRIM( action ) // '" unknown or not allowed'
808	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
809
810	END SELECT
811	ENDDO
812	ENDIF
813
814	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
815	conserve_volume_flow ) THEN
816	message_string = 'initializing_actions = "initialize_vortex"' // &
817	' is not allowed with conserve_volume_flow = .T.'
818	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
819	ENDIF
820
821
822	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
823	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
824	message_string = 'initializing_actions = "set_constant_profiles"' // &
825	' and "set_1d-model_profiles" are not allowed ' // &
826	'simultaneously'
827	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
828	ENDIF
829
830	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
831	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
832	message_string = 'initializing_actions = "set_constant_profiles"' // &
833	' and "by_user" are not allowed simultaneously'
834	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
835	ENDIF
836
837	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
838	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
839	message_string = 'initializing_actions = "by_user" and ' // &
840	'"set_1d-model_profiles" are not allowed simultaneously'
841	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
842	ENDIF
843	!
844	!-- In case of spinup and nested run, spinup end time must be identical
845	!-- in order to have synchronously running simulations.
846	IF ( nested_run ) THEN
847	#if defined( __parallel )
848	CALL MPI_ALLREDUCE( spinup_time, spinup_time_max, 1, MPI_REAL, &
849	MPI_MAX, MPI_COMM_WORLD, ierr )
850	CALL MPI_ALLREDUCE( dt_spinup, dt_spinup_max, 1, MPI_REAL, &
851	MPI_MAX, MPI_COMM_WORLD, ierr )
852
853	IF ( spinup_time /= spinup_time_max .OR. dt_spinup /= dt_spinup_max ) &
854	THEN
855	message_string = 'In case of nesting, spinup_time and ' // &
856	'dt_spinup must be identical in all parent ' // &
857	'and child domains.'
858	CALL message( 'check_parameters', 'PA0489', 3, 2, 0, 6, 0 )
859	ENDIF
860	#endif
861	ENDIF
862
863	IF ( bulk_cloud_model .AND. .NOT. humidity ) THEN
864	WRITE( message_string, * ) 'bulk_cloud_model = ', bulk_cloud_model, &
865	' is not allowed with humidity = ', humidity
866	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
867	ENDIF
868
869	IF ( humidity .AND. sloping_surface ) THEN
870	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
871	'are not allowed simultaneously'
872	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
873	ENDIF
874
875	!-- Check the module settings
876	CALL module_interface_check_parameters
877
878	!
879	!-- In case of no restart run, check initialising parameters and calculate
880	!-- further quantities
881	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
882
883	!
884	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
885	pt_init = pt_surface
886	IF ( humidity ) q_init = q_surface
887	IF ( passive_scalar ) s_init = s_surface
888
889	!--
890	!-- If required, compute initial profile of the geostrophic wind
891	!-- (component ug)
892	i = 1
893	gradient = 0.0_wp
894
895	IF ( .NOT. ocean_mode ) THEN
896
897	ug_vertical_gradient_level_ind(1) = 0
898	ug(0) = ug_surface
899	DO k = 1, nzt+1
900	IF ( i < 11 ) THEN
901	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
902	ug_vertical_gradient_level(i) >= 0.0_wp ) THEN
903	gradient = ug_vertical_gradient(i) / 100.0_wp
904	ug_vertical_gradient_level_ind(i) = k - 1
905	i = i + 1
906	ENDIF
907	ENDIF
908	IF ( gradient /= 0.0_wp ) THEN
909	IF ( k /= 1 ) THEN
910	ug(k) = ug(k-1) + dzu(k) * gradient
911	ELSE
912	ug(k) = ug_surface + dzu(k) * gradient
913	ENDIF
914	ELSE
915	ug(k) = ug(k-1)
916	ENDIF
917	ENDDO
918
919	ELSE
920
921	ug_vertical_gradient_level_ind(1) = nzt+1
922	ug(nzt+1) = ug_surface
923	DO k = nzt, nzb, -1
924	IF ( i < 11 ) THEN
925	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
926	ug_vertical_gradient_level(i) <= 0.0_wp ) THEN
927	gradient = ug_vertical_gradient(i) / 100.0_wp
928	ug_vertical_gradient_level_ind(i) = k + 1
929	i = i + 1
930	ENDIF
931	ENDIF
932	IF ( gradient /= 0.0_wp ) THEN
933	IF ( k /= nzt ) THEN
934	ug(k) = ug(k+1) - dzu(k+1) * gradient
935	ELSE
936	ug(k) = ug_surface - 0.5_wp * dzu(k+1) * gradient
937	ug(k+1) = ug_surface + 0.5_wp * dzu(k+1) * gradient
938	ENDIF
939	ELSE
940	ug(k) = ug(k+1)
941	ENDIF
942	ENDDO
943
944	ENDIF
945
946	!
947	!-- In case of no given gradients for ug, choose a zero gradient
948	IF ( ug_vertical_gradient_level(1) == -9999999.9_wp ) THEN
949	ug_vertical_gradient_level(1) = 0.0_wp
950	ENDIF
951
952	!
953	!--
954	!-- If required, compute initial profile of the geostrophic wind
955	!-- (component vg)
956	i = 1
957	gradient = 0.0_wp
958
959	IF ( .NOT. ocean_mode ) THEN
960
961	vg_vertical_gradient_level_ind(1) = 0
962	vg(0) = vg_surface
963	DO k = 1, nzt+1
964	IF ( i < 11 ) THEN
965	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
966	vg_vertical_gradient_level(i) >= 0.0_wp ) THEN
967	gradient = vg_vertical_gradient(i) / 100.0_wp
968	vg_vertical_gradient_level_ind(i) = k - 1
969	i = i + 1
970	ENDIF
971	ENDIF
972	IF ( gradient /= 0.0_wp ) THEN
973	IF ( k /= 1 ) THEN
974	vg(k) = vg(k-1) + dzu(k) * gradient
975	ELSE
976	vg(k) = vg_surface + dzu(k) * gradient
977	ENDIF
978	ELSE
979	vg(k) = vg(k-1)
980	ENDIF
981	ENDDO
982
983	ELSE
984
985	vg_vertical_gradient_level_ind(1) = nzt+1
986	vg(nzt+1) = vg_surface
987	DO k = nzt, nzb, -1
988	IF ( i < 11 ) THEN
989	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
990	vg_vertical_gradient_level(i) <= 0.0_wp ) THEN
991	gradient = vg_vertical_gradient(i) / 100.0_wp
992	vg_vertical_gradient_level_ind(i) = k + 1
993	i = i + 1
994	ENDIF
995	ENDIF
996	IF ( gradient /= 0.0_wp ) THEN
997	IF ( k /= nzt ) THEN
998	vg(k) = vg(k+1) - dzu(k+1) * gradient
999	ELSE
1000	vg(k) = vg_surface - 0.5_wp * dzu(k+1) * gradient
1001	vg(k+1) = vg_surface + 0.5_wp * dzu(k+1) * gradient
1002	ENDIF
1003	ELSE
1004	vg(k) = vg(k+1)
1005	ENDIF
1006	ENDDO
1007
1008	ENDIF
1009
1010	!
1011	!-- In case of no given gradients for vg, choose a zero gradient
1012	IF ( vg_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1013	vg_vertical_gradient_level(1) = 0.0_wp
1014	ENDIF
1015
1016	!
1017	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1018	!-- interpolate them from wind profile data (if given)
1019	IF ( u_profile(1) == 9999999.9_wp .AND. v_profile(1) == 9999999.9_wp ) THEN
1020
1021	u_init = ug
1022	v_init = vg
1023
1024	ELSEIF ( u_profile(1) == 0.0_wp .AND. v_profile(1) == 0.0_wp ) THEN
1025
1026	IF ( uv_heights(1) /= 0.0_wp ) THEN
1027	message_string = 'uv_heights(1) must be 0.0'
1028	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1029	ENDIF
1030
1031	IF ( omega /= 0.0_wp ) THEN
1032	message_string = 'Coriolis force must be switched off (by setting omega=0.0)' // &
1033	' when prescribing the forcing by u_profile and v_profile'
1034	CALL message( 'check_parameters', 'PA0347', 1, 2, 0, 6, 0 )
1035	ENDIF
1036
1037	use_prescribed_profile_data = .TRUE.
1038
1039	kk = 1
1040	u_init(0) = 0.0_wp
1041	v_init(0) = 0.0_wp
1042
1043	DO k = 1, nz+1
1044
1045	IF ( kk < 200 ) THEN
1046	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1047	kk = kk + 1
1048	IF ( kk == 200 ) EXIT
1049	ENDDO
1050	ENDIF
1051
1052	IF ( kk < 200 .AND. uv_heights(kk+1) /= 9999999.9_wp ) THEN
1053	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1054	( uv_heights(kk+1) - uv_heights(kk) ) * &
1055	( u_profile(kk+1) - u_profile(kk) )
1056	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1057	( uv_heights(kk+1) - uv_heights(kk) ) * &
1058	( v_profile(kk+1) - v_profile(kk) )
1059	ELSE
1060	u_init(k) = u_profile(kk)
1061	v_init(k) = v_profile(kk)
1062	ENDIF
1063
1064	ENDDO
1065
1066	ELSE
1067
1068	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1069	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1070
1071	ENDIF
1072
1073	!
1074	!-- Compute initial temperature profile using the given temperature gradients
1075	IF ( .NOT. neutral ) THEN
1076	CALL init_vertical_profiles( pt_vertical_gradient_level_ind, &
1077	pt_vertical_gradient_level, &
1078	pt_vertical_gradient, pt_init, &
1079	pt_surface, bc_pt_t_val )
1080	ENDIF
1081	!
1082	!-- Compute initial humidity profile using the given humidity gradients
1083	IF ( humidity ) THEN
1084	CALL init_vertical_profiles( q_vertical_gradient_level_ind, &
1085	q_vertical_gradient_level, &
1086	q_vertical_gradient, q_init, &
1087	q_surface, bc_q_t_val )
1088	ENDIF
1089	!
1090	!-- Compute initial scalar profile using the given scalar gradients
1091	IF ( passive_scalar ) THEN
1092	CALL init_vertical_profiles( s_vertical_gradient_level_ind, &
1093	s_vertical_gradient_level, &
1094	s_vertical_gradient, s_init, &
1095	s_surface, bc_s_t_val )
1096	ENDIF
1097	!
1098	!-- TODO
1099	!-- Compute initial chemistry profile using the given chemical species gradients
1100	!-- Russo: Is done in chem_init --> kanani: Revise
1101
1102	ENDIF
1103
1104	!
1105	!-- Check if the control parameter use_subsidence_tendencies is used correctly
1106	IF ( use_subsidence_tendencies .AND. .NOT. large_scale_subsidence ) THEN
1107	message_string = 'The usage of use_subsidence_tendencies ' // &
1108	'requires large_scale_subsidence = .T..'
1109	CALL message( 'check_parameters', 'PA0396', 1, 2, 0, 6, 0 )
1110	ELSEIF ( use_subsidence_tendencies .AND. .NOT. large_scale_forcing ) THEN
1111	message_string = 'The usage of use_subsidence_tendencies ' // &
1112	'requires large_scale_forcing = .T..'
1113	CALL message( 'check_parameters', 'PA0397', 1, 2, 0, 6, 0 )
1114	ENDIF
1115
1116	!
1117	!-- Initialize large scale subsidence if required
1118	If ( large_scale_subsidence ) THEN
1119	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp .AND. &
1120	.NOT. large_scale_forcing ) THEN
1121	CALL init_w_subsidence
1122	ENDIF
1123	!
1124	!-- In case large_scale_forcing is used, profiles for subsidence velocity
1125	!-- are read in from file LSF_DATA
1126
1127	IF ( subs_vertical_gradient_level(1) == -9999999.9_wp .AND. &
1128	.NOT. large_scale_forcing ) THEN
1129	message_string = 'There is no default large scale vertical ' // &
1130	'velocity profile set. Specify the subsidence ' // &
1131	'velocity profile via subs_vertical_gradient ' // &
1132	'and subs_vertical_gradient_level.'
1133	CALL message( 'check_parameters', 'PA0380', 1, 2, 0, 6, 0 )
1134	ENDIF
1135	ELSE
1136	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp ) THEN
1137	message_string = 'Enable usage of large scale subsidence by ' // &
1138	'setting large_scale_subsidence = .T..'
1139	CALL message( 'check_parameters', 'PA0381', 1, 2, 0, 6, 0 )
1140	ENDIF
1141	ENDIF
1142
1143	!
1144	!-- Overwrite parameters from namelist if necessary and compute Coriolis parameter.
1145	!-- @todo - move initialization of f and fs to coriolis_mod.
1146	IF ( input_pids_static ) THEN
1147	latitude = init_model%latitude
1148	longitude = init_model%longitude
1149	rotation_angle = init_model%rotation_angle
1150	ENDIF
1151
1152	f = 2.0_wp * omega * SIN( latitude / 180.0_wp * pi )
1153	fs = 2.0_wp * omega * COS( latitude / 180.0_wp * pi )
1154
1155	!
1156	!-- Check and set buoyancy related parameters and switches
1157	IF ( reference_state == 'horizontal_average' ) THEN
1158	CONTINUE
1159	ELSEIF ( reference_state == 'initial_profile' ) THEN
1160	use_initial_profile_as_reference = .TRUE.
1161	ELSEIF ( reference_state == 'single_value' ) THEN
1162	use_single_reference_value = .TRUE.
1163	IF ( pt_reference == 9999999.9_wp ) pt_reference = pt_surface
1164	vpt_reference = pt_reference * ( 1.0_wp + 0.61_wp * q_surface )
1165	ELSE
1166	message_string = 'illegal value for reference_state: "' // &
1167	TRIM( reference_state ) // '"'
1168	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1169	ENDIF
1170
1171	!
1172	!-- In case of a given slope, compute the relevant quantities
1173	IF ( alpha_surface /= 0.0_wp ) THEN
1174	IF ( ABS( alpha_surface ) > 90.0_wp ) THEN
1175	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1176	' ) must be < 90.0'
1177	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1178	ENDIF
1179	sloping_surface = .TRUE.
1180	cos_alpha_surface = COS( alpha_surface / 180.0_wp * pi )
1181	sin_alpha_surface = SIN( alpha_surface / 180.0_wp * pi )
1182	ENDIF
1183
1184	!
1185	!-- Check time step and cfl_factor
1186	IF ( dt /= -1.0_wp ) THEN
1187	IF ( dt <= 0.0_wp ) THEN
1188	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1189	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1190	ENDIF
1191	dt_3d = dt
1192	dt_fixed = .TRUE.
1193	ENDIF
1194
1195	IF ( cfl_factor <= 0.0_wp .OR. cfl_factor > 1.0_wp ) THEN
1196	IF ( cfl_factor == -1.0_wp ) THEN
1197	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1198	cfl_factor = 0.8_wp
1199	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1200	cfl_factor = 0.9_wp
1201	ELSE
1202	cfl_factor = 0.9_wp
1203	ENDIF
1204	ELSE
1205	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1206	' out of range &0.0 < cfl_factor <= 1.0 is required'
1207	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1208	ENDIF
1209	ENDIF
1210
1211	!
1212	!-- Store simulated time at begin
1213	simulated_time_at_begin = simulated_time
1214
1215	!
1216	!-- Store reference time for coupled runs and change the coupling flag,
1217	!-- if ...
1218	IF ( simulated_time == 0.0_wp ) THEN
1219	IF ( coupling_start_time == 0.0_wp ) THEN
1220	time_since_reference_point = 0.0_wp
1221	ELSEIF ( time_since_reference_point < 0.0_wp ) THEN
1222	run_coupled = .FALSE.
1223	ENDIF
1224	ENDIF
1225
1226	!
1227	!-- Set wind speed in the Galilei-transformed system
1228	IF ( galilei_transformation ) THEN
1229	IF ( use_ug_for_galilei_tr .AND. &
1230	ug_vertical_gradient_level(1) == 0.0_wp .AND. &
1231	ug_vertical_gradient(1) == 0.0_wp .AND. &
1232	vg_vertical_gradient_level(1) == 0.0_wp .AND. &
1233	vg_vertical_gradient(1) == 0.0_wp ) THEN
1234	u_gtrans = ug_surface * 0.6_wp
1235	v_gtrans = vg_surface * 0.6_wp
1236	ELSEIF ( use_ug_for_galilei_tr .AND. &
1237	( ug_vertical_gradient_level(1) /= 0.0_wp .OR. &
1238	ug_vertical_gradient(1) /= 0.0_wp ) ) THEN
1239	message_string = 'baroclinity (ug) not allowed simultaneously' // &
1240	' with galilei transformation'
1241	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1242	ELSEIF ( use_ug_for_galilei_tr .AND. &
1243	( vg_vertical_gradient_level(1) /= 0.0_wp .OR. &
1244	vg_vertical_gradient(1) /= 0.0_wp ) ) THEN
1245	message_string = 'baroclinity (vg) not allowed simultaneously' // &
1246	' with galilei transformation'
1247	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1248	ELSE
1249	message_string = 'variable translation speed used for Galilei-' // &
1250	'transformation, which may cause & instabilities in stably ' // &
1251	'stratified regions'
1252	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1253	ENDIF
1254	ENDIF
1255
1256	!
1257	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1258	!-- fluxes have to be used in the diffusion-terms
1259	IF ( constant_flux_layer ) use_surface_fluxes = .TRUE.
1260
1261	!
1262	!-- Check boundary conditions and set internal variables:
1263	!-- Attention: the lateral boundary conditions have been already checked in
1264	!-- parin
1265	!
1266	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1267	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1268	!-- and tools do not work with non-cyclic boundary conditions.
1269	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1270	IF ( psolver(1:9) /= 'multigrid' ) THEN
1271	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1272	'psolver = "' // TRIM( psolver ) // '"'
1273	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1274	ENDIF
1275	IF ( momentum_advec /= 'pw-scheme' .AND. &
1276	momentum_advec /= 'ws-scheme' ) THEN
1277
1278	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1279	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1280	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1281	ENDIF
1282	IF ( scalar_advec /= 'pw-scheme' .AND. &
1283	scalar_advec /= 'ws-scheme' ) THEN
1284	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1285	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1286	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1287	ENDIF
1288	IF ( galilei_transformation ) THEN
1289	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1290	'galilei_transformation = .T.'
1291	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1292	ENDIF
1293	ENDIF
1294
1295	!
1296	!-- Bottom boundary condition for the turbulent Kinetic energy
1297	IF ( bc_e_b == 'neumann' ) THEN
1298	ibc_e_b = 1
1299	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1300	ibc_e_b = 2
1301	IF ( .NOT. constant_flux_layer ) THEN
1302	bc_e_b = 'neumann'
1303	ibc_e_b = 1
1304	message_string = 'boundary condition bc_e_b changed to "' // &
1305	TRIM( bc_e_b ) // '"'
1306	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1307	ENDIF
1308	ELSE
1309	message_string = 'unknown boundary condition: bc_e_b = "' // &
1310	TRIM( bc_e_b ) // '"'
1311	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1312	ENDIF
1313
1314	!
1315	!-- Boundary conditions for perturbation pressure
1316	IF ( bc_p_b == 'dirichlet' ) THEN
1317	ibc_p_b = 0
1318	ELSEIF ( bc_p_b == 'neumann' ) THEN
1319	ibc_p_b = 1
1320	ELSE
1321	message_string = 'unknown boundary condition: bc_p_b = "' // &
1322	TRIM( bc_p_b ) // '"'
1323	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1324	ENDIF
1325
1326	IF ( bc_p_t == 'dirichlet' ) THEN
1327	ibc_p_t = 0
1328	!-- TO_DO: later set bc_p_t to neumann before, in case of nested domain
1329	ELSEIF ( bc_p_t == 'neumann' .OR. bc_p_t == 'nested' ) THEN
1330	ibc_p_t = 1
1331	ELSE
1332	message_string = 'unknown boundary condition: bc_p_t = "' // &
1333	TRIM( bc_p_t ) // '"'
1334	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1335	ENDIF
1336
1337	!
1338	!-- Boundary conditions for potential temperature
1339	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1340	ibc_pt_b = 2
1341	ELSE
1342	IF ( bc_pt_b == 'dirichlet' ) THEN
1343	ibc_pt_b = 0
1344	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1345	ibc_pt_b = 1
1346	ELSE
1347	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1348	TRIM( bc_pt_b ) // '"'
1349	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1350	ENDIF
1351	ENDIF
1352
1353	IF ( bc_pt_t == 'dirichlet' ) THEN
1354	ibc_pt_t = 0
1355	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1356	ibc_pt_t = 1
1357	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1358	ibc_pt_t = 2
1359	ELSEIF ( bc_pt_t == 'nested' .OR. bc_pt_t == 'nesting_offline' ) THEN
1360	ibc_pt_t = 3
1361	ELSE
1362	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1363	TRIM( bc_pt_t ) // '"'
1364	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1365	ENDIF
1366
1367	IF ( ANY( wall_heatflux /= 0.0_wp ) .AND. &
1368	surface_heatflux == 9999999.9_wp ) THEN
1369	message_string = 'wall_heatflux additionally requires ' // &
1370	'setting of surface_heatflux'
1371	CALL message( 'check_parameters', 'PA0443', 1, 2, 0, 6, 0 )
1372	ENDIF
1373
1374	!
1375	! This IF clause needs revision, got too complex!!
1376	IF ( surface_heatflux == 9999999.9_wp ) THEN
1377	constant_heatflux = .FALSE.
1378	IF ( large_scale_forcing .OR. land_surface .OR. urban_surface ) THEN
1379	IF ( ibc_pt_b == 0 ) THEN
1380	constant_heatflux = .FALSE.
1381	ELSEIF ( ibc_pt_b == 1 ) THEN
1382	constant_heatflux = .TRUE.
1383	surface_heatflux = 0.0_wp
1384	ENDIF
1385	ENDIF
1386	ELSE
1387	constant_heatflux = .TRUE.
1388	ENDIF
1389
1390	IF ( top_heatflux == 9999999.9_wp ) constant_top_heatflux = .FALSE.
1391
1392	IF ( neutral ) THEN
1393
1394	IF ( surface_heatflux /= 0.0_wp .AND. &
1395	surface_heatflux /= 9999999.9_wp ) THEN
1396	message_string = 'heatflux must not be set for pure neutral flow'
1397	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1398	ENDIF
1399
1400	IF ( top_heatflux /= 0.0_wp .AND. top_heatflux /= 9999999.9_wp ) &
1401	THEN
1402	message_string = 'heatflux must not be set for pure neutral flow'
1403	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1404	ENDIF
1405
1406	ENDIF
1407
1408	IF ( top_momentumflux_u /= 9999999.9_wp .AND. &
1409	top_momentumflux_v /= 9999999.9_wp ) THEN
1410	constant_top_momentumflux = .TRUE.
1411	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9_wp .AND. &
1412	top_momentumflux_v == 9999999.9_wp ) ) THEN
1413	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1414	'must be set'
1415	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1416	ENDIF
1417
1418	!
1419	!-- A given surface temperature implies Dirichlet boundary condition for
1420	!-- temperature. In this case specification of a constant heat flux is
1421	!-- forbidden.
1422	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1423	surface_heatflux /= 0.0_wp ) THEN
1424	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1425	'& is not allowed with constant_heatflux = .TRUE.'
1426	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1427	ENDIF
1428	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0_wp ) THEN
1429	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1430	'wed with pt_surface_initial_change (/=0) = ', &
1431	pt_surface_initial_change
1432	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1433	ENDIF
1434
1435	!
1436	!-- A given temperature at the top implies Dirichlet boundary condition for
1437	!-- temperature. In this case specification of a constant heat flux is
1438	!-- forbidden.
1439	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1440	top_heatflux /= 0.0_wp ) THEN
1441	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1442	'" is not allowed with constant_top_heatflux = .TRUE.'
1443	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1444	ENDIF
1445
1446	!
1447	!-- Set boundary conditions for total water content
1448	IF ( humidity ) THEN
1449
1450	IF ( ANY( wall_humidityflux /= 0.0_wp ) .AND. &
1451	surface_waterflux == 9999999.9_wp ) THEN
1452	message_string = 'wall_humidityflux additionally requires ' // &
1453	'setting of surface_waterflux'
1454	CALL message( 'check_parameters', 'PA0444', 1, 2, 0, 6, 0 )
1455	ENDIF
1456
1457	CALL set_bc_scalars( 'q', bc_q_b, bc_q_t, ibc_q_b, ibc_q_t, &
1458	'PA0071', 'PA0072' )
1459
1460	IF ( surface_waterflux == 9999999.9_wp ) THEN
1461	constant_waterflux = .FALSE.
1462	IF ( large_scale_forcing .OR. land_surface ) THEN
1463	IF ( ibc_q_b == 0 ) THEN
1464	constant_waterflux = .FALSE.
1465	ELSEIF ( ibc_q_b == 1 ) THEN
1466	constant_waterflux = .TRUE.
1467	ENDIF
1468	ENDIF
1469	ELSE
1470	constant_waterflux = .TRUE.
1471	ENDIF
1472
1473	CALL check_bc_scalars( 'q', bc_q_b, ibc_q_b, 'PA0073', 'PA0074', &
1474	constant_waterflux, q_surface_initial_change )
1475
1476	ENDIF
1477
1478	IF ( passive_scalar ) THEN
1479
1480	IF ( ANY( wall_scalarflux /= 0.0_wp ) .AND. &
1481	surface_scalarflux == 9999999.9_wp ) THEN
1482	message_string = 'wall_scalarflux additionally requires ' // &
1483	'setting of surface_scalarflux'
1484	CALL message( 'check_parameters', 'PA0445', 1, 2, 0, 6, 0 )
1485	ENDIF
1486
1487	IF ( surface_scalarflux == 9999999.9_wp ) constant_scalarflux = .FALSE.
1488
1489	CALL set_bc_scalars( 's', bc_s_b, bc_s_t, ibc_s_b, ibc_s_t, &
1490	'PA0071', 'PA0072' )
1491
1492	CALL check_bc_scalars( 's', bc_s_b, ibc_s_b, 'PA0073', 'PA0074', &
1493	constant_scalarflux, s_surface_initial_change )
1494
1495	IF ( top_scalarflux == 9999999.9_wp ) constant_top_scalarflux = .FALSE.
1496	!
1497	!-- A fixed scalar concentration at the top implies Dirichlet boundary
1498	!-- condition for scalar. Hence, in this case specification of a constant
1499	!-- scalar flux is forbidden.
1500	IF ( ( ibc_s_t == 0 .OR. ibc_s_t == 2 ) .AND. constant_top_scalarflux &
1501	.AND. top_scalarflux /= 0.0_wp ) THEN
1502	message_string = 'boundary condition: bc_s_t = "' // &
1503	TRIM( bc_s_t ) // '" is not allowed with ' // &
1504	'top_scalarflux /= 0.0'
1505	CALL message( 'check_parameters', 'PA0441', 1, 2, 0, 6, 0 )
1506	ENDIF
1507	ENDIF
1508
1509	!
1510	!-- Boundary conditions for chemical species
1511	IF ( air_chemistry ) CALL chem_boundary_conds( 'init' )
1512
1513	!
1514	!-- Boundary conditions for horizontal components of wind speed
1515	IF ( bc_uv_b == 'dirichlet' ) THEN
1516	ibc_uv_b = 0
1517	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1518	ibc_uv_b = 1
1519	IF ( constant_flux_layer ) THEN
1520	message_string = 'boundary condition: bc_uv_b = "' // &
1521	TRIM( bc_uv_b ) // '" is not allowed with constant_flux_layer' &
1522	// ' = .TRUE.'
1523	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1524	ENDIF
1525	ELSE
1526	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1527	TRIM( bc_uv_b ) // '"'
1528	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1529	ENDIF
1530	!
1531	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1532	!-- assigned with the u and v values of the ocean surface
1533	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1534	ibc_uv_b = 2
1535	ENDIF
1536
1537	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1538	bc_uv_t = 'neumann'
1539	ibc_uv_t = 1
1540	ELSE
1541	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1542	ibc_uv_t = 0
1543	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1544	!
1545	!-- Velocities for the initial u,v-profiles are set zero at the top
1546	!-- in case of dirichlet_0 conditions
1547	u_init(nzt+1) = 0.0_wp
1548	v_init(nzt+1) = 0.0_wp
1549	ENDIF
1550	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1551	ibc_uv_t = 1
1552	ELSEIF ( bc_uv_t == 'nested' .OR. bc_uv_t == 'nesting_offline' ) THEN
1553	ibc_uv_t = 3
1554	ELSE
1555	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1556	TRIM( bc_uv_t ) // '"'
1557	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1558	ENDIF
1559	ENDIF
1560
1561	!
1562	!-- Compute and check, respectively, the Rayleigh Damping parameter
1563	IF ( rayleigh_damping_factor == -1.0_wp ) THEN
1564	rayleigh_damping_factor = 0.0_wp
1565	ELSE
1566	IF ( rayleigh_damping_factor < 0.0_wp .OR. &
1567	rayleigh_damping_factor > 1.0_wp ) THEN
1568	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1569	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1570	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1571	ENDIF
1572	ENDIF
1573
1574	IF ( rayleigh_damping_height == -1.0_wp ) THEN
1575	IF ( .NOT. ocean_mode ) THEN
1576	rayleigh_damping_height = 0.66666666666_wp * zu(nzt)
1577	ELSE
1578	rayleigh_damping_height = 0.66666666666_wp * zu(nzb)
1579	ENDIF
1580	ELSE
1581	IF ( .NOT. ocean_mode ) THEN
1582	IF ( rayleigh_damping_height < 0.0_wp .OR. &
1583	rayleigh_damping_height > zu(nzt) ) THEN
1584	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1585	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1586	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1587	ENDIF
1588	ELSE
1589	IF ( rayleigh_damping_height > 0.0_wp .OR. &
1590	rayleigh_damping_height < zu(nzb) ) THEN
1591	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1592	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1593	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1594	ENDIF
1595	ENDIF
1596	ENDIF
1597
1598	!
1599	!-- Check number of chosen statistic regions
1600	IF ( statistic_regions < 0 ) THEN
1601	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1602	statistic_regions+1, ' is not allowed'
1603	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1604	ENDIF
1605	IF ( normalizing_region > statistic_regions .OR. &
1606	normalizing_region < 0) THEN
1607	WRITE ( message_string, * ) 'normalizing_region = ', &
1608	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1609	' (value of statistic_regions)'
1610	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1611	ENDIF
1612
1613	!
1614	!-- Set the default intervals for data output, if necessary
1615	!-- NOTE: dt_dosp has already been set in spectra_parin
1616	IF ( dt_data_output /= 9999999.9_wp ) THEN
1617	IF ( dt_dopr == 9999999.9_wp ) dt_dopr = dt_data_output
1618	IF ( dt_dopts == 9999999.9_wp ) dt_dopts = dt_data_output
1619	IF ( dt_do2d_xy == 9999999.9_wp ) dt_do2d_xy = dt_data_output
1620	IF ( dt_do2d_xz == 9999999.9_wp ) dt_do2d_xz = dt_data_output
1621	IF ( dt_do2d_yz == 9999999.9_wp ) dt_do2d_yz = dt_data_output
1622	IF ( dt_do3d == 9999999.9_wp ) dt_do3d = dt_data_output
1623	IF ( dt_data_output_av == 9999999.9_wp ) dt_data_output_av = dt_data_output
1624	DO mid = 1, max_masks
1625	IF ( dt_domask(mid) == 9999999.9_wp ) dt_domask(mid) = dt_data_output
1626	ENDDO
1627	ENDIF
1628
1629	!
1630	!-- Set the default skip time intervals for data output, if necessary
1631	IF ( skip_time_dopr == 9999999.9_wp ) &
1632	skip_time_dopr = skip_time_data_output
1633	IF ( skip_time_do2d_xy == 9999999.9_wp ) &
1634	skip_time_do2d_xy = skip_time_data_output
1635	IF ( skip_time_do2d_xz == 9999999.9_wp ) &
1636	skip_time_do2d_xz = skip_time_data_output
1637	IF ( skip_time_do2d_yz == 9999999.9_wp ) &
1638	skip_time_do2d_yz = skip_time_data_output
1639	IF ( skip_time_do3d == 9999999.9_wp ) &
1640	skip_time_do3d = skip_time_data_output
1641	IF ( skip_time_data_output_av == 9999999.9_wp ) &
1642	skip_time_data_output_av = skip_time_data_output
1643	DO mid = 1, max_masks
1644	IF ( skip_time_domask(mid) == 9999999.9_wp ) &
1645	skip_time_domask(mid) = skip_time_data_output
1646	ENDDO
1647
1648	!
1649	!-- Check the average intervals (first for 3d-data, then for profiles)
1650	IF ( averaging_interval > dt_data_output_av ) THEN
1651	WRITE( message_string, * ) 'averaging_interval = ', &
1652	averaging_interval, ' must be <= dt_data_output_av = ', &
1653	dt_data_output_av
1654	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1655	ENDIF
1656
1657	IF ( averaging_interval_pr == 9999999.9_wp ) THEN
1658	averaging_interval_pr = averaging_interval
1659	ENDIF
1660
1661	IF ( averaging_interval_pr > dt_dopr ) THEN
1662	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1663	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1664	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1665	ENDIF
1666
1667	!
1668	!-- Set the default interval for profiles entering the temporal average
1669	IF ( dt_averaging_input_pr == 9999999.9_wp ) THEN
1670	dt_averaging_input_pr = dt_averaging_input
1671	ENDIF
1672
1673	!
1674	!-- Set the default interval for the output of timeseries to a reasonable
1675	!-- value (tries to minimize the number of calls of flow_statistics)
1676	IF ( dt_dots == 9999999.9_wp ) THEN
1677	IF ( averaging_interval_pr == 0.0_wp ) THEN
1678	dt_dots = MIN( dt_run_control, dt_dopr )
1679	ELSE
1680	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1681	ENDIF
1682	ENDIF
1683
1684	!
1685	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1686	IF ( dt_averaging_input > averaging_interval ) THEN
1687	WRITE( message_string, * ) 'dt_averaging_input = ', &
1688	dt_averaging_input, ' must be <= averaging_interval = ', &
1689	averaging_interval
1690	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1691	ENDIF
1692
1693	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1694	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1695	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1696	averaging_interval_pr
1697	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1698	ENDIF
1699
1700	!
1701	!-- Determine the number of output profiles and check whether they are
1702	!-- permissible
1703	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1704
1705	dopr_n = dopr_n + 1
1706	i = dopr_n
1707
1708	!
1709	!-- Determine internal profile number (for hom, homs)
1710	!-- and store height levels
1711	SELECT CASE ( TRIM( data_output_pr(i) ) )
1712
1713	CASE ( 'u', '#u' )
1714	dopr_index(i) = 1
1715	dopr_unit(i) = 'm/s'
1716	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1717	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1718	dopr_initial_index(i) = 5
1719	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1720	data_output_pr(i) = data_output_pr(i)(2:)
1721	ENDIF
1722
1723	CASE ( 'v', '#v' )
1724	dopr_index(i) = 2
1725	dopr_unit(i) = 'm/s'
1726	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1727	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1728	dopr_initial_index(i) = 6
1729	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1730	data_output_pr(i) = data_output_pr(i)(2:)
1731	ENDIF
1732
1733	CASE ( 'w' )
1734	dopr_index(i) = 3
1735	dopr_unit(i) = 'm/s'
1736	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1737
1738	CASE ( 'theta', '#theta' )
1739	IF ( .NOT. bulk_cloud_model ) THEN
1740	dopr_index(i) = 4
1741	dopr_unit(i) = 'K'
1742	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1743	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1744	dopr_initial_index(i) = 7
1745	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1746	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
1747	data_output_pr(i) = data_output_pr(i)(2:)
1748	ENDIF
1749	ELSE
1750	dopr_index(i) = 43
1751	dopr_unit(i) = 'K'
1752	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1753	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1754	dopr_initial_index(i) = 28
1755	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1756	hom(nzb,2,28,:) = 0.0_wp ! because zu(nzb) is negative
1757	data_output_pr(i) = data_output_pr(i)(2:)
1758	ENDIF
1759	ENDIF
1760
1761	CASE ( 'e', '#e' )
1762	dopr_index(i) = 8
1763	dopr_unit(i) = 'm2/s2'
1764	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1765	hom(nzb,2,8,:) = 0.0_wp
1766	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1767	dopr_initial_index(i) = 8
1768	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1769	data_output_pr(i) = data_output_pr(i)(2:)
1770	ENDIF
1771
1772	CASE ( 'km', '#km' )
1773	dopr_index(i) = 9
1774	dopr_unit(i) = 'm2/s'
1775	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1776	hom(nzb,2,9,:) = 0.0_wp
1777	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1778	dopr_initial_index(i) = 23
1779	hom(:,2,23,:) = hom(:,2,9,:)
1780	data_output_pr(i) = data_output_pr(i)(2:)
1781	ENDIF
1782
1783	CASE ( 'kh', '#kh' )
1784	dopr_index(i) = 10
1785	dopr_unit(i) = 'm2/s'
1786	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1787	hom(nzb,2,10,:) = 0.0_wp
1788	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1789	dopr_initial_index(i) = 24
1790	hom(:,2,24,:) = hom(:,2,10,:)
1791	data_output_pr(i) = data_output_pr(i)(2:)
1792	ENDIF
1793
1794	CASE ( 'l', '#l' )
1795	dopr_index(i) = 11
1796	dopr_unit(i) = 'm'
1797	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1798	hom(nzb,2,11,:) = 0.0_wp
1799	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1800	dopr_initial_index(i) = 25
1801	hom(:,2,25,:) = hom(:,2,11,:)
1802	data_output_pr(i) = data_output_pr(i)(2:)
1803	ENDIF
1804
1805	CASE ( 'w"u"' )
1806	dopr_index(i) = 12
1807	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1808	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1809	IF ( constant_flux_layer ) hom(nzb,2,12,:) = zu(1)
1810
1811	CASE ( 'wu' )
1812	dopr_index(i) = 13
1813	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1814	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1815
1816	CASE ( 'w"v"' )
1817	dopr_index(i) = 14
1818	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1819	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1820	IF ( constant_flux_layer ) hom(nzb,2,14,:) = zu(1)
1821
1822	CASE ( 'wv' )
1823	dopr_index(i) = 15
1824	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1825	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1826
1827	CASE ( 'w"theta"' )
1828	dopr_index(i) = 16
1829	dopr_unit(i) = TRIM ( heatflux_output_unit )
1830	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1831
1832	CASE ( 'wtheta' )
1833	dopr_index(i) = 17
1834	dopr_unit(i) = TRIM ( heatflux_output_unit )
1835	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1836
1837	CASE ( 'wtheta' )
1838	dopr_index(i) = 18
1839	dopr_unit(i) = TRIM ( heatflux_output_unit )
1840	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1841
1842	CASE ( 'wu' )
1843	dopr_index(i) = 19
1844	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1845	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1846	IF ( constant_flux_layer ) hom(nzb,2,19,:) = zu(1)
1847
1848	CASE ( 'wv' )
1849	dopr_index(i) = 20
1850	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1851	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1852	IF ( constant_flux_layer ) hom(nzb,2,20,:) = zu(1)
1853
1854	CASE ( 'wthetaBC' )
1855	dopr_index(i) = 21
1856	dopr_unit(i) = TRIM ( heatflux_output_unit )
1857	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1858
1859	CASE ( 'wthetaBC' )
1860	dopr_index(i) = 22
1861	dopr_unit(i) = TRIM ( heatflux_output_unit )
1862	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1863
1864	CASE ( 'u*2' )
1865	dopr_index(i) = 30
1866	dopr_unit(i) = 'm2/s2'
1867	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1868
1869	CASE ( 'v*2' )
1870	dopr_index(i) = 31
1871	dopr_unit(i) = 'm2/s2'
1872	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1873
1874	CASE ( 'w*2' )
1875	dopr_index(i) = 32
1876	dopr_unit(i) = 'm2/s2'
1877	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1878
1879	CASE ( 'theta*2' )
1880	dopr_index(i) = 33
1881	dopr_unit(i) = 'K2'
1882	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1883
1884	CASE ( 'e*' )
1885	dopr_index(i) = 34
1886	dopr_unit(i) = 'm2/s2'
1887	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1888
1889	CASE ( 'w2theta' )
1890	dopr_index(i) = 35
1891	dopr_unit(i) = 'K m2/s2'
1892	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1893
1894	CASE ( 'wtheta2' )
1895	dopr_index(i) = 36
1896	dopr_unit(i) = 'K2 m/s'
1897	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1898
1899	CASE ( 'we' )
1900	dopr_index(i) = 37
1901	dopr_unit(i) = 'm3/s3'
1902	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1903
1904	CASE ( 'w*3' )
1905	dopr_index(i) = 38
1906	dopr_unit(i) = 'm3/s3'
1907	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1908
1909	CASE ( 'Sw' )
1910	dopr_index(i) = 39
1911	dopr_unit(i) = 'none'
1912	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1913
1914	CASE ( 'p' )
1915	dopr_index(i) = 40
1916	dopr_unit(i) = 'Pa'
1917	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1918
1919	CASE ( 'q', '#q' )
1920	IF ( .NOT. humidity ) THEN
1921	message_string = 'data_output_pr = ' // &
1922	TRIM( data_output_pr(i) ) // ' is not imp' // &
1923	'lemented for humidity = .FALSE.'
1924	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1925	ELSE
1926	dopr_index(i) = 41
1927	dopr_unit(i) = 'kg/kg'
1928	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1929	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1930	dopr_initial_index(i) = 26
1931	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1932	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
1933	data_output_pr(i) = data_output_pr(i)(2:)
1934	ENDIF
1935	ENDIF
1936
1937	CASE ( 's', '#s' )
1938	IF ( .NOT. passive_scalar ) THEN
1939	message_string = 'data_output_pr = ' // &
1940	TRIM( data_output_pr(i) ) // ' is not imp' // &
1941	'lemented for passive_scalar = .FALSE.'
1942	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1943	ELSE
1944	dopr_index(i) = 115
1945	dopr_unit(i) = 'kg/m3'
1946	hom(:,2,115,:) = SPREAD( zu, 2, statistic_regions+1 )
1947	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1948	dopr_initial_index(i) = 121
1949	hom(:,2,121,:) = SPREAD( zu, 2, statistic_regions+1 )
1950	hom(nzb,2,121,:) = 0.0_wp ! because zu(nzb) is negative
1951	data_output_pr(i) = data_output_pr(i)(2:)
1952	ENDIF
1953	ENDIF
1954
1955	CASE ( 'qv', '#qv' )
1956	IF ( .NOT. bulk_cloud_model ) THEN
1957	dopr_index(i) = 41
1958	dopr_unit(i) = 'kg/kg'
1959	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1960	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1961	dopr_initial_index(i) = 26
1962	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1963	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
1964	data_output_pr(i) = data_output_pr(i)(2:)
1965	ENDIF
1966	ELSE
1967	dopr_index(i) = 42
1968	dopr_unit(i) = 'kg/kg'
1969	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1970	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1971	dopr_initial_index(i) = 27
1972	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1973	hom(nzb,2,27,:) = 0.0_wp ! because zu(nzb) is negative
1974	data_output_pr(i) = data_output_pr(i)(2:)
1975	ENDIF
1976	ENDIF
1977
1978	CASE ( 'thetal', '#thetal' )
1979	IF ( .NOT. bulk_cloud_model ) THEN
1980	message_string = 'data_output_pr = ' // &
1981	TRIM( data_output_pr(i) ) // ' is not imp' // &
1982	'lemented for bulk_cloud_model = .FALSE.'
1983	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1984	ELSE
1985	dopr_index(i) = 4
1986	dopr_unit(i) = 'K'
1987	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1988	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1989	dopr_initial_index(i) = 7
1990	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1991	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
1992	data_output_pr(i) = data_output_pr(i)(2:)
1993	ENDIF
1994	ENDIF
1995
1996	CASE ( 'thetav', '#thetav' )
1997	dopr_index(i) = 44
1998	dopr_unit(i) = 'K'
1999	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
2000	IF ( data_output_pr(i)(1:1) == '#' ) THEN
2001	dopr_initial_index(i) = 29
2002	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2003	hom(nzb,2,29,:) = 0.0_wp ! because zu(nzb) is negative
2004	data_output_pr(i) = data_output_pr(i)(2:)
2005	ENDIF
2006
2007	CASE ( 'w"thetav"' )
2008	dopr_index(i) = 45
2009	dopr_unit(i) = TRIM ( heatflux_output_unit )
2010	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2011
2012	CASE ( 'wthetav' )
2013	dopr_index(i) = 46
2014	dopr_unit(i) = TRIM ( heatflux_output_unit )
2015	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2016
2017	CASE ( 'wthetav' )
2018	dopr_index(i) = 47
2019	dopr_unit(i) = TRIM ( heatflux_output_unit )
2020	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2021
2022	CASE ( 'w"q"' )
2023	IF ( .NOT. humidity ) THEN
2024	message_string = 'data_output_pr = ' // &
2025	TRIM( data_output_pr(i) ) // ' is not imp' // &
2026	'lemented for humidity = .FALSE.'
2027	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2028	ELSE
2029	dopr_index(i) = 48
2030	dopr_unit(i) = TRIM ( waterflux_output_unit )
2031	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2032	ENDIF
2033
2034	CASE ( 'wq' )
2035	IF ( .NOT. humidity ) THEN
2036	message_string = 'data_output_pr = ' // &
2037	TRIM( data_output_pr(i) ) // ' is not imp' // &
2038	'lemented for humidity = .FALSE.'
2039	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2040	ELSE
2041	dopr_index(i) = 49
2042	dopr_unit(i) = TRIM ( waterflux_output_unit )
2043	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2044	ENDIF
2045
2046	CASE ( 'wq' )
2047	IF ( .NOT. humidity ) THEN
2048	message_string = 'data_output_pr = ' // &
2049	TRIM( data_output_pr(i) ) // ' is not imp' // &
2050	'lemented for humidity = .FALSE.'
2051	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2052	ELSE
2053	dopr_index(i) = 50
2054	dopr_unit(i) = TRIM ( waterflux_output_unit )
2055	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2056	ENDIF
2057
2058	CASE ( 'w"s"' )
2059	IF ( .NOT. passive_scalar ) THEN
2060	message_string = 'data_output_pr = ' // &
2061	TRIM( data_output_pr(i) ) // ' is not imp' // &
2062	'lemented for passive_scalar = .FALSE.'
2063	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2064	ELSE
2065	dopr_index(i) = 117
2066	dopr_unit(i) = 'kg/m3 m/s'
2067	hom(:,2,117,:) = SPREAD( zw, 2, statistic_regions+1 )
2068	ENDIF
2069
2070	CASE ( 'ws' )
2071	IF ( .NOT. passive_scalar ) THEN
2072	message_string = 'data_output_pr = ' // &
2073	TRIM( data_output_pr(i) ) // ' is not imp' // &
2074	'lemented for passive_scalar = .FALSE.'
2075	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2076	ELSE
2077	dopr_index(i) = 114
2078	dopr_unit(i) = 'kg/m3 m/s'
2079	hom(:,2,114,:) = SPREAD( zw, 2, statistic_regions+1 )
2080	ENDIF
2081
2082	CASE ( 'ws' )
2083	IF ( .NOT. passive_scalar ) THEN
2084	message_string = 'data_output_pr = ' // &
2085	TRIM( data_output_pr(i) ) // ' is not imp' // &
2086	'lemented for passive_scalar = .FALSE.'
2087	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2088	ELSE
2089	dopr_index(i) = 118
2090	dopr_unit(i) = 'kg/m3 m/s'
2091	hom(:,2,118,:) = SPREAD( zw, 2, statistic_regions+1 )
2092	ENDIF
2093
2094	CASE ( 'w"qv"' )
2095	IF ( humidity .AND. .NOT. bulk_cloud_model ) THEN
2096	dopr_index(i) = 48
2097	dopr_unit(i) = TRIM ( waterflux_output_unit )
2098	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2099	ELSEIF ( humidity .AND. bulk_cloud_model ) THEN
2100	dopr_index(i) = 51
2101	dopr_unit(i) = TRIM ( waterflux_output_unit )
2102	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2103	ELSE
2104	message_string = 'data_output_pr = ' // &
2105	TRIM( data_output_pr(i) ) // ' is not imp' // &
2106	'lemented for bulk_cloud_model = .FALSE. ' // &
2107	'and humidity = .FALSE.'
2108	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2109	ENDIF
2110
2111	CASE ( 'wqv' )
2112	IF ( humidity .AND. .NOT. bulk_cloud_model ) THEN
2113	dopr_index(i) = 49
2114	dopr_unit(i) = TRIM ( waterflux_output_unit )
2115	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2116	ELSEIF( humidity .AND. bulk_cloud_model ) THEN
2117	dopr_index(i) = 52
2118	dopr_unit(i) = TRIM ( waterflux_output_unit )
2119	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2120	ELSE
2121	message_string = 'data_output_pr = ' // &
2122	TRIM( data_output_pr(i) ) // ' is not imp' // &
2123	'lemented for bulk_cloud_model = .FALSE. ' // &
2124	'and humidity = .FALSE.'
2125	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2126	ENDIF
2127
2128	CASE ( 'wqv' )
2129	IF ( humidity .AND. .NOT. bulk_cloud_model ) THEN
2130	dopr_index(i) = 50
2131	dopr_unit(i) = TRIM ( waterflux_output_unit )
2132	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2133	ELSEIF ( humidity .AND. bulk_cloud_model ) THEN
2134	dopr_index(i) = 53
2135	dopr_unit(i) = TRIM ( waterflux_output_unit )
2136	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2137	ELSE
2138	message_string = 'data_output_pr = ' // &
2139	TRIM( data_output_pr(i) ) // ' is not imp' // &
2140	'lemented for bulk_cloud_model = .FALSE. ' // &
2141	'and humidity = .FALSE.'
2142	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2143	ENDIF
2144
2145	CASE ( 'ql' )
2146	IF ( .NOT. bulk_cloud_model .AND. .NOT. cloud_droplets ) THEN
2147	message_string = 'data_output_pr = ' // &
2148	TRIM( data_output_pr(i) ) // ' is not imp' // &
2149	'lemented for bulk_cloud_model = .FALSE. ' // &
2150	'and cloud_droplets = .FALSE.'
2151	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2152	ELSE
2153	dopr_index(i) = 54
2154	dopr_unit(i) = 'kg/kg'
2155	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2156	ENDIF
2157
2158	CASE ( 'wuu*:dz' )
2159	dopr_index(i) = 55
2160	dopr_unit(i) = 'm2/s3'
2161	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2162
2163	CASE ( 'wp:dz' )
2164	dopr_index(i) = 56
2165	dopr_unit(i) = 'm2/s3'
2166	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2167
2168	CASE ( 'w"e:dz' )
2169	dopr_index(i) = 57
2170	dopr_unit(i) = 'm2/s3'
2171	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2172
2173	CASE ( 'u"theta"' )
2174	dopr_index(i) = 58
2175	dopr_unit(i) = TRIM ( heatflux_output_unit )
2176	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2177
2178	CASE ( 'utheta' )
2179	dopr_index(i) = 59
2180	dopr_unit(i) = TRIM ( heatflux_output_unit )
2181	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2182
2183	CASE ( 'utheta_t' )
2184	dopr_index(i) = 60
2185	dopr_unit(i) = TRIM ( heatflux_output_unit )
2186	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2187
2188	CASE ( 'v"theta"' )
2189	dopr_index(i) = 61
2190	dopr_unit(i) = TRIM ( heatflux_output_unit )
2191	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2192
2193	CASE ( 'vtheta' )
2194	dopr_index(i) = 62
2195	dopr_unit(i) = TRIM ( heatflux_output_unit )
2196	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2197
2198	CASE ( 'vtheta_t' )
2199	dopr_index(i) = 63
2200	dopr_unit(i) = TRIM ( heatflux_output_unit )
2201	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2202
2203	CASE ( 'wp' )
2204	dopr_index(i) = 68
2205	dopr_unit(i) = 'm3/s3'
2206	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2207
2208	CASE ( 'w"e' )
2209	dopr_index(i) = 69
2210	dopr_unit(i) = 'm3/s3'
2211	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2212
2213	CASE ( 'q*2' )
2214	IF ( .NOT. humidity ) THEN
2215	message_string = 'data_output_pr = ' // &
2216	TRIM( data_output_pr(i) ) // ' is not imp' // &
2217	'lemented for humidity = .FALSE.'
2218	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2219	ELSE
2220	dopr_index(i) = 70
2221	dopr_unit(i) = 'kg2/kg2'
2222	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2223	ENDIF
2224
2225	CASE ( 'hyp' )
2226	dopr_index(i) = 72
2227	dopr_unit(i) = 'hPa'
2228	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2229
2230	CASE ( 'rho' )
2231	dopr_index(i) = 119
2232	dopr_unit(i) = 'kg/m3'
2233	hom(:,2,119,:) = SPREAD( zu, 2, statistic_regions+1 )
2234
2235	CASE ( 'rho_zw' )
2236	dopr_index(i) = 120
2237	dopr_unit(i) = 'kg/m3'
2238	hom(:,2,120,:) = SPREAD( zw, 2, statistic_regions+1 )
2239
2240	CASE ( 'ug' )
2241	dopr_index(i) = 78
2242	dopr_unit(i) = 'm/s'
2243	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
2244
2245	CASE ( 'vg' )
2246	dopr_index(i) = 79
2247	dopr_unit(i) = 'm/s'
2248	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
2249
2250	CASE ( 'w_subs' )
2251	IF ( .NOT. large_scale_subsidence ) THEN
2252	message_string = 'data_output_pr = ' // &
2253	TRIM( data_output_pr(i) ) // ' is not imp' // &
2254	'lemented for large_scale_subsidence = .FALSE.'
2255	CALL message( 'check_parameters', 'PA0382', 1, 2, 0, 6, 0 )
2256	ELSE
2257	dopr_index(i) = 80
2258	dopr_unit(i) = 'm/s'
2259	hom(:,2,80,:) = SPREAD( zu, 2, statistic_regions+1 )
2260	ENDIF
2261
2262	CASE ( 's*2' )
2263	IF ( .NOT. passive_scalar ) THEN
2264	message_string = 'data_output_pr = ' // &
2265	TRIM( data_output_pr(i) ) // ' is not imp' // &
2266	'lemented for passive_scalar = .FALSE.'
2267	CALL message( 'check_parameters', 'PA0185', 1, 2, 0, 6, 0 )
2268	ELSE
2269	dopr_index(i) = 116
2270	dopr_unit(i) = 'kg2/m6'
2271	hom(:,2,116,:) = SPREAD( zu, 2, statistic_regions+1 )
2272	ENDIF
2273
2274	CASE DEFAULT
2275	unit = 'illegal'
2276	!
2277	!-- Check for other modules
2278	CALL module_interface_check_data_output_pr( data_output_pr(i), i, &
2279	unit, dopr_unit(i) )
2280
2281	!
2282	!-- No valid quantity found
2283	IF ( unit == 'illegal' ) THEN
2284	IF ( data_output_pr_user(1) /= ' ' ) THEN
2285	message_string = 'illegal value for data_output_pr or ' // &
2286	'data_output_pr_user = "' // &
2287	TRIM( data_output_pr(i) ) // '"'
2288	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2289	ELSE
2290	message_string = 'illegal value for data_output_pr = "' // &
2291	TRIM( data_output_pr(i) ) // '"'
2292	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2293	ENDIF
2294	ENDIF
2295
2296	END SELECT
2297
2298	ENDDO
2299
2300
2301	!
2302	!-- Append user-defined data output variables to the standard data output
2303	IF ( data_output_user(1) /= ' ' ) THEN
2304	i = 1
2305	DO WHILE ( data_output(i) /= ' ' .AND. i <= 500 )
2306	i = i + 1
2307	ENDDO
2308	j = 1
2309	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 500 )
2310	IF ( i > 500 ) THEN
2311	message_string = 'number of output quantitities given by data' // &
2312	'_output and data_output_user exceeds the limit of 500'
2313	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2314	ENDIF
2315	data_output(i) = data_output_user(j)
2316	i = i + 1
2317	j = j + 1
2318	ENDDO
2319	ENDIF
2320
2321	!
2322	!-- Check and set steering parameters for 2d/3d data output and averaging
2323	i = 1
2324	DO WHILE ( data_output(i) /= ' ' .AND. i <= 500 )
2325	!
2326	!-- Check for data averaging
2327	ilen = LEN_TRIM( data_output(i) )
2328	j = 0 ! no data averaging
2329	IF ( ilen > 3 ) THEN
2330	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2331	j = 1 ! data averaging
2332	data_output(i) = data_output(i)(1:ilen-3)
2333	ENDIF
2334	ENDIF
2335	!
2336	!-- Check for cross section or volume data
2337	ilen = LEN_TRIM( data_output(i) )
2338	k = 0 ! 3d data
2339	var = data_output(i)(1:ilen)
2340	IF ( ilen > 3 ) THEN
2341	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2342	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2343	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2344	k = 1 ! 2d data
2345	var = data_output(i)(1:ilen-3)
2346	ENDIF
2347	ENDIF
2348
2349	!
2350	!-- Check for allowed value and set units
2351	SELECT CASE ( TRIM( var ) )
2352
2353	CASE ( 'e' )
2354	IF ( constant_diffusion ) THEN
2355	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2356	'res constant_diffusion = .FALSE.'
2357	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2358	ENDIF
2359	unit = 'm2/s2'
2360
2361	CASE ( 'thetal' )
2362	IF ( .NOT. bulk_cloud_model ) THEN
2363	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2364	'res bulk_cloud_model = .TRUE.'
2365	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2366	ENDIF
2367	unit = 'K'
2368
2369	CASE ( 'pc', 'pr' )
2370	IF ( .NOT. particle_advection ) THEN
2371	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2372	'es a "particle_parameters"-NAMELIST in the parameter ' // &
2373	'file (PARIN)'
2374	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2375	ENDIF
2376	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2377	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2378
2379	CASE ( 'q', 'thetav' )
2380	IF ( .NOT. humidity ) THEN
2381	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2382	'res humidity = .TRUE.'
2383	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2384	ENDIF
2385	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2386	IF ( TRIM( var ) == 'thetav' ) unit = 'K'
2387
2388	CASE ( 'ql' )
2389	IF ( .NOT. ( bulk_cloud_model .OR. cloud_droplets ) ) THEN
2390	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2391	'res bulk_cloud_model = .TRUE. or cloud_droplets = .TRUE.'
2392	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2393	ENDIF
2394	unit = 'kg/kg'
2395
2396	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2397	IF ( .NOT. cloud_droplets ) THEN
2398	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2399	'res cloud_droplets = .TRUE.'
2400	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2401	ENDIF
2402	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2403	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2404	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2405
2406	CASE ( 'qv' )
2407	IF ( .NOT. bulk_cloud_model ) THEN
2408	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2409	'res bulk_cloud_model = .TRUE.'
2410	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2411	ENDIF
2412	unit = 'kg/kg'
2413
2414	CASE ( 's' )
2415	IF ( .NOT. passive_scalar ) THEN
2416	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2417	'res passive_scalar = .TRUE.'
2418	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2419	ENDIF
2420	unit = 'kg/m3'
2421
2422	CASE ( 'p', 'theta', 'u', 'v', 'w' )
2423	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2424	IF ( TRIM( var ) == 'theta' ) unit = 'K'
2425	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2426	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2427	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2428	CONTINUE
2429
2430	CASE ( 'ghf', 'lwp', 'ol', 'qsws', 'r_a*', &
2431	'shf', 'ssws', 't', 'tsurf', 'us*', &
2432	'z0', 'z0h', 'z0q*' )
2433	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2434	message_string = 'illegal value for data_output: "' // &
2435	TRIM( var ) // '" & only 2d-horizontal ' // &
2436	'cross sections are allowed for this value'
2437	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2438	ENDIF
2439
2440	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. bulk_cloud_model ) THEN
2441	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2442	'res bulk_cloud_model = .TRUE.'
2443	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2444	ENDIF
2445	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2446	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2447	'res humidity = .TRUE.'
2448	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2449	ENDIF
2450
2451	IF ( TRIM( var ) == 'ghf*' .AND. .NOT. land_surface ) THEN
2452	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2453	'res land_surface = .TRUE.'
2454	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
2455	ENDIF
2456
2457	IF ( ( TRIM( var ) == 'r_a' .OR. TRIM( var ) == 'ghf' ) &
2458	.AND. .NOT. land_surface .AND. .NOT. urban_surface ) &
2459	THEN
2460	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2461	'res land_surface = .TRUE. or ' // &
2462	'urban_surface = .TRUE.'
2463	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
2464	ENDIF
2465
2466	IF ( TRIM( var ) == 'ssws*' .AND. .NOT. passive_scalar ) THEN
2467	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2468	'res passive_scalar = .TRUE.'
2469	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2470	ENDIF
2471
2472	IF ( TRIM( var ) == 'ghf*' ) unit = 'W/m2'
2473	IF ( TRIM( var ) == 'lwp*' ) unit = 'kg/m2'
2474	IF ( TRIM( var ) == 'ol*' ) unit = 'm'
2475	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2476	IF ( TRIM( var ) == 'r_a*' ) unit = 's/m'
2477	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2478	IF ( TRIM( var ) == 'ssws' ) unit = 'kg/m2s'
2479	IF ( TRIM( var ) == 't*' ) unit = 'K'
2480	IF ( TRIM( var ) == 'tsurf*' ) unit = 'K'
2481	IF ( TRIM( var ) == 'us*' ) unit = 'm/s'
2482	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2483	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2484	!
2485	!-- Output of surface latent and sensible heat flux will be in W/m2
2486	!-- in case of natural- and urban-type surfaces, even if
2487	!-- flux_output_mode is set to kinematic units.
2488	IF ( land_surface .OR. urban_surface ) THEN
2489	IF ( TRIM( var ) == 'shf*' ) unit = 'W/m2'
2490	IF ( TRIM( var ) == 'qsws*' ) unit = 'W/m2'
2491	ENDIF
2492
2493	CASE DEFAULT
2494	!
2495	!-- Check for other modules
2496	CALL module_interface_check_data_output( var, unit, i, j, ilen, k )
2497
2498	IF ( unit == 'illegal' ) THEN
2499	IF ( data_output_user(1) /= ' ' ) THEN
2500	message_string = 'illegal value for data_output or ' // &
2501	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2502	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2503	ELSE
2504	message_string = 'illegal value for data_output = "' // &
2505	TRIM( data_output(i) ) // '"'
2506	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2507	ENDIF
2508	ENDIF
2509
2510	END SELECT
2511	!
2512	!-- Set the internal steering parameters appropriately
2513	IF ( k == 0 ) THEN
2514	do3d_no(j) = do3d_no(j) + 1
2515	do3d(j,do3d_no(j)) = data_output(i)
2516	do3d_unit(j,do3d_no(j)) = unit
2517	ELSE
2518	do2d_no(j) = do2d_no(j) + 1
2519	do2d(j,do2d_no(j)) = data_output(i)
2520	do2d_unit(j,do2d_no(j)) = unit
2521	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2522	data_output_xy(j) = .TRUE.
2523	ENDIF
2524	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2525	data_output_xz(j) = .TRUE.
2526	ENDIF
2527	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2528	data_output_yz(j) = .TRUE.
2529	ENDIF
2530	ENDIF
2531
2532	IF ( j == 1 ) THEN
2533	!
2534	!-- Check, if variable is already subject to averaging
2535	found = .FALSE.
2536	DO k = 1, doav_n
2537	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2538	ENDDO
2539
2540	IF ( .NOT. found ) THEN
2541	doav_n = doav_n + 1
2542	doav(doav_n) = var
2543	ENDIF
2544	ENDIF
2545
2546	i = i + 1
2547	ENDDO
2548
2549	!
2550	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2551	IF ( doav_n > 0 .AND. averaging_interval == 0.0_wp ) THEN
2552	WRITE( message_string, * ) 'output of averaged quantity "', &
2553	TRIM( doav(1) ), '_av" requires to set a ', &
2554	'non-zero averaging interval'
2555	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2556	ENDIF
2557
2558	!
2559	!-- Check sectional planes and store them in one shared array
2560	IF ( ANY( section_xy > nz + 1 ) ) THEN
2561	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2562	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2563	ENDIF
2564	IF ( ANY( section_xz > ny + 1 ) ) THEN
2565	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2566	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2567	ENDIF
2568	IF ( ANY( section_yz > nx + 1 ) ) THEN
2569	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2570	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2571	ENDIF
2572	section(:,1) = section_xy
2573	section(:,2) = section_xz
2574	section(:,3) = section_yz
2575
2576	IF ( ANY( data_output_xy ) .AND. .NOT. ANY( section(:,1) /= -9999 ) ) THEN
2577	WRITE( message_string, * ) 'section_xy not defined for requested ' // &
2578	'xy-cross section output.&At least one ' // &
2579	'cross section must be given.'
2580	CALL message( 'check_parameters', 'PA0681', 1, 2, 0, 6, 0 )
2581	ENDIF
2582	IF ( ANY( data_output_xz ) .AND. .NOT. ANY( section(:,2) /= -9999 ) ) THEN
2583	WRITE( message_string, * ) 'section_xz not defined for requested ' // &
2584	'xz-cross section output.&At least one ' // &
2585	'cross section must be given.'
2586	CALL message( 'check_parameters', 'PA0681', 1, 2, 0, 6, 0 )
2587	ENDIF
2588	IF ( ANY( data_output_yz ) .AND. .NOT. ANY( section(:,3) /= -9999 ) ) THEN
2589	WRITE( message_string, * ) 'section_yz not defined for requested ' // &
2590	'yz-cross section output.&At least one ' // &
2591	'cross section must be given.'
2592	CALL message( 'check_parameters', 'PA0681', 1, 2, 0, 6, 0 )
2593	ENDIF
2594	!
2595	!-- Upper plot limit for 3D arrays
2596	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2597
2598	!
2599	!-- Set output format string (used in header)
2600	SELECT CASE ( netcdf_data_format )
2601	CASE ( 1 )
2602	netcdf_data_format_string = 'netCDF classic'
2603	CASE ( 2 )
2604	netcdf_data_format_string = 'netCDF 64bit offset'
2605	CASE ( 3 )
2606	netcdf_data_format_string = 'netCDF4/HDF5'
2607	CASE ( 4 )
2608	netcdf_data_format_string = 'netCDF4/HDF5 classic'
2609	CASE ( 5 )
2610	netcdf_data_format_string = 'parallel netCDF4/HDF5'
2611	CASE ( 6 )
2612	netcdf_data_format_string = 'parallel netCDF4/HDF5 classic'
2613
2614	END SELECT
2615
2616	!
2617	!-- Check mask conditions
2618	DO mid = 1, max_masks
2619	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2620	data_output_masks_user(mid,1) /= ' ' ) THEN
2621	masks = masks + 1
2622	ENDIF
2623	ENDDO
2624
2625	IF ( masks < 0 .OR. masks > max_masks ) THEN
2626	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2627	'<= ', max_masks, ' (=max_masks)'
2628	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2629	ENDIF
2630	IF ( masks > 0 ) THEN
2631	mask_scale(1) = mask_scale_x
2632	mask_scale(2) = mask_scale_y
2633	mask_scale(3) = mask_scale_z
2634	IF ( ANY( mask_scale <= 0.0_wp ) ) THEN
2635	WRITE( message_string, * ) &
2636	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2637	'must be > 0.0'
2638	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2639	ENDIF
2640	!
2641	!-- Generate masks for masked data output
2642	!-- Parallel netcdf output is not tested so far for masked data, hence
2643	!-- netcdf_data_format is switched back to non-parallel output.
2644	netcdf_data_format_save = netcdf_data_format
2645	IF ( netcdf_data_format > 4 ) THEN
2646	IF ( netcdf_data_format == 5 ) netcdf_data_format = 3
2647	IF ( netcdf_data_format == 6 ) netcdf_data_format = 4
2648	message_string = 'netCDF file formats '// &
2649	'5 (parallel netCDF 4) and ' // &
2650	'6 (parallel netCDF 4 Classic model) '// &
2651	'& are currently not supported (not yet tested) ' //&
2652	'for masked data. &Using respective non-parallel' //&
2653	' output for masked data.'
2654	CALL message( 'check_parameters', 'PA0383', 0, 0, 0, 6, 0 )
2655	ENDIF
2656	CALL init_masks
2657	netcdf_data_format = netcdf_data_format_save
2658	ENDIF
2659
2660	!
2661	!-- Check the NetCDF data format
2662	IF ( netcdf_data_format > 2 ) THEN
2663	#if defined( __netcdf4 )
2664	CONTINUE
2665	#else
2666	message_string = 'netCDF: netCDF4 format requested but no ' // &
2667	'cpp-directive __netcdf4 given & switch ' // &
2668	'back to 64-bit offset format'
2669	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2670	netcdf_data_format = 2
2671	#endif
2672	ENDIF
2673	IF ( netcdf_data_format > 4 ) THEN
2674	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
2675	CONTINUE
2676	#else
2677	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
2678	'cpp-directive __netcdf4_parallel given & switch ' //&
2679	'back to netCDF4 non-parallel output'
2680	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
2681	netcdf_data_format = netcdf_data_format - 2
2682	#endif
2683	ENDIF
2684
2685	!
2686	!-- Calculate fixed number of output time levels for parallel netcdf output.
2687	!-- The time dimension has to be defined as limited for parallel output,
2688	!-- because otherwise the I/O performance drops significantly.
2689	IF ( netcdf_data_format > 4 ) THEN
2690
2691	!
2692	!-- Check if any of the follwoing data output interval is 0.0s, which is
2693	!-- not allowed for parallel output.
2694	CALL check_dt_do( dt_do3d, 'dt_do3d' )
2695	CALL check_dt_do( dt_do2d_xy, 'dt_do2d_xy' )
2696	CALL check_dt_do( dt_do2d_xz, 'dt_do2d_xz' )
2697	CALL check_dt_do( dt_do2d_yz, 'dt_do2d_yz' )
2698	CALL check_dt_do( dt_data_output_av, 'dt_data_output_av' )
2699
2700	!-- Set needed time levels (ntdim) to
2701	!-- saved time levels + to be saved time levels.
2702	ntdim_3d(0) = do3d_time_count(0) + CEILING( &
2703	( end_time - MAX( &
2704	MERGE(skip_time_do3d, skip_time_do3d + spinup_time, &
2705	data_output_during_spinup ), &
2706	simulated_time_at_begin ) &
2707	) / dt_do3d )
2708	IF ( do3d_at_begin ) ntdim_3d(0) = ntdim_3d(0) + 1
2709
2710	ntdim_3d(1) = do3d_time_count(1) + CEILING( &
2711	( end_time - MAX( &
2712	MERGE( skip_time_data_output_av, skip_time_data_output_av &
2713	+ spinup_time, data_output_during_spinup ), &
2714	simulated_time_at_begin ) &
2715	) / dt_data_output_av )
2716
2717	ntdim_2d_xy(0) = do2d_xy_time_count(0) + CEILING( &
2718	( end_time - MAX( &
2719	MERGE(skip_time_do2d_xy, skip_time_do2d_xy + spinup_time, &
2720	data_output_during_spinup ), &
2721	simulated_time_at_begin ) &
2722	) / dt_do2d_xy )
2723
2724	ntdim_2d_xz(0) = do2d_xz_time_count(0) + CEILING( &
2725	( end_time - MAX( &
2726	MERGE(skip_time_do2d_xz, skip_time_do2d_xz + spinup_time, &
2727	data_output_during_spinup ), &
2728	simulated_time_at_begin ) &
2729	) / dt_do2d_xz )
2730
2731	ntdim_2d_yz(0) = do2d_yz_time_count(0) + CEILING( &
2732	( end_time - MAX( &
2733	MERGE(skip_time_do2d_yz, skip_time_do2d_yz + spinup_time, &
2734	data_output_during_spinup ), &
2735	simulated_time_at_begin ) &
2736	) / dt_do2d_yz )
2737
2738	IF ( do2d_at_begin ) THEN
2739	ntdim_2d_xy(0) = ntdim_2d_xy(0) + 1
2740	ntdim_2d_xz(0) = ntdim_2d_xz(0) + 1
2741	ntdim_2d_yz(0) = ntdim_2d_yz(0) + 1
2742	ENDIF
2743	!
2744	!-- Please note, for averaged 2D data skip_time_data_output_av is the relavant
2745	!-- output control parameter.
2746	ntdim_2d_xy(1) = do2d_xy_time_count(1) + CEILING( &
2747	( end_time - MAX( MERGE( skip_time_data_output_av, &
2748	skip_time_data_output_av + spinup_time, &
2749	data_output_during_spinup ), &
2750	simulated_time_at_begin ) &
2751	) / dt_data_output_av )
2752
2753	ntdim_2d_xz(1) = do2d_xz_time_count(1) + CEILING( &
2754	( end_time - MAX( MERGE( skip_time_data_output_av, &
2755	skip_time_data_output_av + spinup_time, &
2756	data_output_during_spinup ), &
2757	simulated_time_at_begin ) &
2758	) / dt_data_output_av )
2759
2760	ntdim_2d_yz(1) = do2d_yz_time_count(1) + CEILING( &
2761	( end_time - MAX( MERGE( skip_time_data_output_av, &
2762	skip_time_data_output_av + spinup_time, &
2763	data_output_during_spinup ), &
2764	simulated_time_at_begin ) &
2765	) / dt_data_output_av )
2766
2767	ENDIF
2768
2769	!
2770	!-- Check, whether a constant diffusion coefficient shall be used
2771	IF ( km_constant /= -1.0_wp ) THEN
2772	IF ( km_constant < 0.0_wp ) THEN
2773	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2774	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2775	ELSE
2776	IF ( prandtl_number < 0.0_wp ) THEN
2777	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2778	' < 0.0'
2779	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2780	ENDIF
2781	constant_diffusion = .TRUE.
2782
2783	IF ( constant_flux_layer ) THEN
2784	message_string = 'constant_flux_layer is not allowed with fixed ' &
2785	// 'value of km'
2786	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2787	ENDIF
2788	ENDIF
2789	ENDIF
2790
2791	!
2792	!-- In case of non-cyclic lateral boundaries and a damping layer for the
2793	!-- potential temperature, check the width of the damping layer
2794	IF ( bc_lr /= 'cyclic' ) THEN
2795	IF ( pt_damping_width < 0.0_wp .OR. &
2796	pt_damping_width > REAL( (nx+1) * dx ) ) THEN
2797	message_string = 'pt_damping_width out of range'
2798	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2799	ENDIF
2800	ENDIF
2801
2802	IF ( bc_ns /= 'cyclic' ) THEN
2803	IF ( pt_damping_width < 0.0_wp .OR. &
2804	pt_damping_width > REAL( (ny+1) * dy ) ) THEN
2805	message_string = 'pt_damping_width out of range'
2806	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2807	ENDIF
2808	ENDIF
2809
2810	!
2811	!-- Check value range for zeta = z/L
2812	IF ( zeta_min >= zeta_max ) THEN
2813	WRITE( message_string, * ) 'zeta_min = ', zeta_min, ' must be less ', &
2814	'than zeta_max = ', zeta_max
2815	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2816	ENDIF
2817
2818	!
2819	!-- Check random generator
2820	IF ( (random_generator /= 'system-specific' .AND. &
2821	random_generator /= 'random-parallel' ) .AND. &
2822	random_generator /= 'numerical-recipes' ) THEN
2823	message_string = 'unknown random generator: random_generator = "' // &
2824	TRIM( random_generator ) // '"'
2825	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2826	ENDIF
2827
2828	!
2829	!-- Determine upper and lower hight level indices for random perturbations
2830	IF ( disturbance_level_b == -9999999.9_wp ) THEN
2831	IF ( ocean_mode ) THEN
2832	disturbance_level_b = zu((nzt*2)/3)
2833	disturbance_level_ind_b = ( nzt * 2 ) / 3
2834	ELSE
2835	disturbance_level_b = zu(nzb+3)
2836	disturbance_level_ind_b = nzb + 3
2837	ENDIF
2838	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2839	WRITE( message_string, * ) 'disturbance_level_b = ', &
2840	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2841	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2842	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2843	WRITE( message_string, * ) 'disturbance_level_b = ', &
2844	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2845	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2846	ELSE
2847	DO k = 3, nzt-2
2848	IF ( disturbance_level_b <= zu(k) ) THEN
2849	disturbance_level_ind_b = k
2850	EXIT
2851	ENDIF
2852	ENDDO
2853	ENDIF
2854
2855	IF ( disturbance_level_t == -9999999.9_wp ) THEN
2856	IF ( ocean_mode ) THEN
2857	disturbance_level_t = zu(nzt-3)
2858	disturbance_level_ind_t = nzt - 3
2859	ELSE
2860	disturbance_level_t = zu(nzt/3)
2861	disturbance_level_ind_t = nzt / 3
2862	ENDIF
2863	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2864	WRITE( message_string, * ) 'disturbance_level_t = ', &
2865	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2866	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2867	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2868	WRITE( message_string, * ) 'disturbance_level_t = ', &
2869	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2870	disturbance_level_b
2871	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2872	ELSE
2873	DO k = 3, nzt-2
2874	IF ( disturbance_level_t <= zu(k) ) THEN
2875	disturbance_level_ind_t = k
2876	EXIT
2877	ENDIF
2878	ENDDO
2879	ENDIF
2880
2881	!
2882	!-- Check again whether the levels determined this way are ok.
2883	!-- Error may occur at automatic determination and too few grid points in
2884	!-- z-direction.
2885	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2886	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2887	disturbance_level_ind_t, ' must be >= ', &
2888	'disturbance_level_ind_b = ', disturbance_level_ind_b
2889	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2890	ENDIF
2891
2892	!
2893	!-- Determine the horizontal index range for random perturbations.
2894	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2895	!-- near the inflow and the perturbation area is further limited to ...(1)
2896	!-- after the initial phase of the flow.
2897
2898	IF ( bc_lr /= 'cyclic' ) THEN
2899	IF ( inflow_disturbance_begin == -1 ) THEN
2900	inflow_disturbance_begin = MIN( 10, nx/2 )
2901	ENDIF
2902	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2903	THEN
2904	message_string = 'inflow_disturbance_begin out of range'
2905	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2906	ENDIF
2907	IF ( inflow_disturbance_end == -1 ) THEN
2908	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2909	ENDIF
2910	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2911	THEN
2912	message_string = 'inflow_disturbance_end out of range'
2913	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2914	ENDIF
2915	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2916	IF ( inflow_disturbance_begin == -1 ) THEN
2917	inflow_disturbance_begin = MIN( 10, ny/2 )
2918	ENDIF
2919	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2920	THEN
2921	message_string = 'inflow_disturbance_begin out of range'
2922	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2923	ENDIF
2924	IF ( inflow_disturbance_end == -1 ) THEN
2925	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2926	ENDIF
2927	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2928	THEN
2929	message_string = 'inflow_disturbance_end out of range'
2930	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2931	ENDIF
2932	ENDIF
2933
2934	IF ( random_generator == 'random-parallel' ) THEN
2935	dist_nxl = nxl; dist_nxr = nxr
2936	dist_nys = nys; dist_nyn = nyn
2937	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2938	dist_nxr = MIN( nx - inflow_disturbance_begin, nxr )
2939	dist_nxl(1) = MAX( nx - inflow_disturbance_end, nxl )
2940	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2941	dist_nxl = MAX( inflow_disturbance_begin, nxl )
2942	dist_nxr(1) = MIN( inflow_disturbance_end, nxr )
2943	ELSEIF ( bc_lr == 'nested' .OR. bc_lr == 'nesting_offline' ) THEN
2944	dist_nxl = MAX( inflow_disturbance_begin, nxl )
2945	dist_nxr = MIN( nx - inflow_disturbance_begin, nxr )
2946	ENDIF
2947	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2948	dist_nyn = MIN( ny - inflow_disturbance_begin, nyn )
2949	dist_nys(1) = MAX( ny - inflow_disturbance_end, nys )
2950	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2951	dist_nys = MAX( inflow_disturbance_begin, nys )
2952	dist_nyn(1) = MIN( inflow_disturbance_end, nyn )
2953	ELSEIF ( bc_ns == 'nested' .OR. bc_ns == 'nesting_offline' ) THEN
2954	dist_nys = MAX( inflow_disturbance_begin, nys )
2955	dist_nyn = MIN( ny - inflow_disturbance_begin, nyn )
2956	ENDIF
2957	ELSE
2958	dist_nxl = 0; dist_nxr = nx
2959	dist_nys = 0; dist_nyn = ny
2960	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2961	dist_nxr = nx - inflow_disturbance_begin
2962	dist_nxl(1) = nx - inflow_disturbance_end
2963	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2964	dist_nxl = inflow_disturbance_begin
2965	dist_nxr(1) = inflow_disturbance_end
2966	ELSEIF ( bc_lr == 'nested' .OR. bc_lr == 'nesting_offline' ) THEN
2967	dist_nxr = nx - inflow_disturbance_begin
2968	dist_nxl = inflow_disturbance_begin
2969	ENDIF
2970	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2971	dist_nyn = ny - inflow_disturbance_begin
2972	dist_nys(1) = ny - inflow_disturbance_end
2973	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2974	dist_nys = inflow_disturbance_begin
2975	dist_nyn(1) = inflow_disturbance_end
2976	ELSEIF ( bc_ns == 'nested' .OR. bc_ns == 'nesting_offline' ) THEN
2977	dist_nyn = ny - inflow_disturbance_begin
2978	dist_nys = inflow_disturbance_begin
2979	ENDIF
2980	ENDIF
2981
2982	!
2983	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2984	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2985	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2986	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2987	'condition at the inflow boundary'
2988	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2989	ENDIF
2990
2991	!
2992	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
2993	!-- data from prerun in the first main run
2994	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
2995	initializing_actions /= 'read_restart_data' ) THEN
2996	message_string = 'turbulent_inflow = .T. requires ' // &
2997	'initializing_actions = ''cyclic_fill'' or ' // &
2998	'initializing_actions = ''read_restart_data'' '
2999	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
3000	ENDIF
3001
3002	!
3003	!-- In case of turbulent inflow
3004	IF ( turbulent_inflow ) THEN
3005
3006	!
3007	!-- Calculate the index of the recycling plane
3008	IF ( recycling_width <= dx .OR. recycling_width >= nx * dx ) THEN
3009	WRITE( message_string, * ) 'illegal value for recycling_width: ', &
3010	recycling_width
3011	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3012	ENDIF
3013	!
3014	!-- Calculate the index
3015	recycling_plane = recycling_width / dx
3016	!
3017	!-- Check for correct input of recycling method for thermodynamic quantities
3018	IF ( TRIM( recycling_method_for_thermodynamic_quantities ) /= 'turbulent_fluctuation' .AND. &
3019	TRIM( recycling_method_for_thermodynamic_quantities ) /= 'absolute_value' ) THEN
3020	WRITE( message_string, * ) 'unknown recycling method for thermodynamic quantities: ', &
3021	TRIM( recycling_method_for_thermodynamic_quantities )
3022	CALL message( 'check_parameters', 'PA0184', 1, 2, 0, 6, 0 )
3023	ENDIF
3024
3025	ENDIF
3026
3027
3028	IF ( turbulent_outflow ) THEN
3029	!
3030	!-- Turbulent outflow requires Dirichlet conditions at the respective inflow
3031	!-- boundary (so far, a turbulent outflow is realized at the right side only)
3032	IF ( bc_lr /= 'dirichlet/radiation' ) THEN
3033	message_string = 'turbulent_outflow = .T. requires ' // &
3034	'bc_lr = "dirichlet/radiation"'
3035	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
3036	ENDIF
3037	!
3038	!-- The ouflow-source plane must lay inside the model domain
3039	IF ( outflow_source_plane < dx .OR. &
3040	outflow_source_plane > nx * dx ) THEN
3041	WRITE( message_string, * ) 'illegal value for outflow_source'// &
3042	'_plane: ', outflow_source_plane
3043	CALL message( 'check_parameters', 'PA0145', 1, 2, 0, 6, 0 )
3044	ENDIF
3045	ENDIF
3046
3047	!
3048	!-- Determine damping level index for 1D model
3049	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3050	IF ( damp_level_1d == -1.0_wp ) THEN
3051	damp_level_1d = zu(nzt+1)
3052	damp_level_ind_1d = nzt + 1
3053	ELSEIF ( damp_level_1d < 0.0_wp .OR. damp_level_1d > zu(nzt+1) ) THEN
3054	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3055	' must be >= 0.0 and <= ', zu(nzt+1), '(zu(nzt+1))'
3056	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3057	ELSE
3058	DO k = 1, nzt+1
3059	IF ( damp_level_1d <= zu(k) ) THEN
3060	damp_level_ind_1d = k
3061	EXIT
3062	ENDIF
3063	ENDDO
3064	ENDIF
3065	ENDIF
3066
3067	!
3068	!-- Check some other 1d-model parameters
3069	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3070	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3071	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3072	'" is unknown'
3073	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3074	ENDIF
3075	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3076	TRIM( dissipation_1d ) /= 'detering' .AND. &
3077	TRIM( dissipation_1d ) /= 'prognostic' ) THEN
3078	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3079	'" is unknown'
3080	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3081	ENDIF
3082	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3083	TRIM( dissipation_1d ) == 'as_in_3d_model' ) THEN
3084	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3085	'" requires mixing_length_1d = "as_in_3d_model"'
3086	CALL message( 'check_parameters', 'PA0485', 1, 2, 0, 6, 0 )
3087	ENDIF
3088
3089	!
3090	!-- Set time for the next user defined restart (time_restart is the
3091	!-- internal parameter for steering restart events)
3092	IF ( restart_time /= 9999999.9_wp ) THEN
3093	IF ( restart_time > time_since_reference_point ) THEN
3094	time_restart = restart_time
3095	ENDIF
3096	ELSE
3097	!
3098	!-- In case of a restart run, set internal parameter to default (no restart)
3099	!-- if the NAMELIST-parameter restart_time is omitted
3100	time_restart = 9999999.9_wp
3101	ENDIF
3102
3103	!
3104	!-- Check pressure gradient conditions
3105	IF ( dp_external .AND. conserve_volume_flow ) THEN
3106	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3107	'w are .TRUE. but one of them must be .FALSE.'
3108	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3109	ENDIF
3110	IF ( dp_external ) THEN
3111	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3112	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3113	' of range [zu(nzb), zu(nzt)]'
3114	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3115	ENDIF
3116	IF ( .NOT. ANY( dpdxy /= 0.0_wp ) ) THEN
3117	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3118	'ro, i.e. the external pressure gradient will not be applied'
3119	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3120	ENDIF
3121	ENDIF
3122	IF ( ANY( dpdxy /= 0.0_wp ) .AND. .NOT. dp_external ) THEN
3123	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3124	'.FALSE., i.e. the external pressure gradient & will not be applied'
3125	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3126	ENDIF
3127	IF ( conserve_volume_flow ) THEN
3128	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3129
3130	conserve_volume_flow_mode = 'initial_profiles'
3131
3132	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3133	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3134	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3135	conserve_volume_flow_mode
3136	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3137	ENDIF
3138	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3139	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3140	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3141	'require conserve_volume_flow_mode = ''initial_profiles'''
3142	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3143	ENDIF
3144	ENDIF
3145	IF ( ( u_bulk /= 0.0_wp .OR. v_bulk /= 0.0_wp ) .AND. &
3146	( .NOT. conserve_volume_flow .OR. &
3147	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3148	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3149	'conserve_volume_flow = .T. and ', &
3150	'conserve_volume_flow_mode = ''bulk_velocity'''
3151	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3152	ENDIF
3153
3154	!
3155	!-- Prevent empty time records in volume, cross-section and masked data in case
3156	!-- of non-parallel netcdf-output in restart runs
3157	IF ( netcdf_data_format < 5 ) THEN
3158	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
3159	do3d_time_count = 0
3160	do2d_xy_time_count = 0
3161	do2d_xz_time_count = 0
3162	do2d_yz_time_count = 0
3163	domask_time_count = 0
3164	ENDIF
3165	ENDIF
3166
3167
3168	!
3169	!-- Check roughness length, which has to be smaller than dz/2
3170	IF ( ( constant_flux_layer .OR. &
3171	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) &
3172	.AND. roughness_length >= 0.5 * dz(1) ) THEN
3173	message_string = 'roughness_length must be smaller than dz/2'
3174	CALL message( 'check_parameters', 'PA0424', 1, 2, 0, 6, 0 )
3175	ENDIF
3176
3177	!
3178	!-- Vertical nesting: check fine and coarse grid compatibility for data exchange
3179	IF ( vnested ) CALL vnest_check_parameters
3180
3181	!
3182	!-- Check if topography is read from file in case of complex terrain simulations
3183	IF ( complex_terrain .AND. TRIM( topography ) /= 'read_from_file' ) THEN
3184	message_string = 'complex_terrain requires topography' // &
3185	' = ''read_from_file'''
3186	CALL message( 'check_parameters', 'PA0295', 1, 2, 0, 6, 0 )
3187	ENDIF
3188
3189	!
3190	!-- Check if vertical grid stretching is switched off in case of complex
3191	!-- terrain simulations
3192	IF ( complex_terrain .AND. &
3193	ANY( dz_stretch_level_start /= -9999999.9_wp ) ) THEN
3194	message_string = 'Vertical grid stretching is not allowed for ' // &
3195	'complex_terrain = .T.'
3196	CALL message( 'check_parameters', 'PA0473', 1, 2, 0, 6, 0 )
3197	ENDIF
3198
3199	CALL location_message( 'checking parameters', 'finished' )
3200
3201	CONTAINS
3202
3203	!------------------------------------------------------------------------------!
3204	! Description:
3205	! ------------
3206	!> Check the length of data output intervals. In case of parallel NetCDF output
3207	!> the time levels of the output files need to be fixed. Therefore setting the
3208	!> output interval to 0.0s (usually used to output each timestep) is not
3209	!> possible as long as a non-fixed timestep is used.
3210	!------------------------------------------------------------------------------!
3211
3212	SUBROUTINE check_dt_do( dt_do, dt_do_name )
3213
3214	IMPLICIT NONE
3215
3216	CHARACTER (LEN=*), INTENT (IN) :: dt_do_name !< parin variable name
3217
3218	REAL(wp), INTENT (INOUT) :: dt_do !< data output interval
3219
3220	IF ( dt_do == 0.0_wp ) THEN
3221	IF ( dt_fixed ) THEN
3222	WRITE( message_string, '(A,F9.4,A)' ) 'Output at every ' // &
3223	'timestep is wanted (' // dt_do_name // ' = 0.0).&'// &
3224	'The output interval is set to the fixed timestep dt '// &
3225	'= ', dt, 's.'
3226	CALL message( 'check_parameters', 'PA0060', 0, 0, 0, 6, 0 )
3227	dt_do = dt
3228	ELSE
3229	message_string = dt_do_name // ' = 0.0 while using a ' // &
3230	'variable timestep and parallel netCDF4 ' // &
3231	'is not allowed.'
3232	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
3233	ENDIF
3234	ENDIF
3235
3236	END SUBROUTINE check_dt_do
3237
3238
3239
3240	!------------------------------------------------------------------------------!
3241	! Description:
3242	! ------------
3243	!> Set the bottom and top boundary conditions for humidity and scalars.
3244	!------------------------------------------------------------------------------!
3245
3246	SUBROUTINE set_bc_scalars( sq, bc_b, bc_t, ibc_b, ibc_t, err_nr_b, err_nr_t )
3247
3248
3249	IMPLICIT NONE
3250
3251	CHARACTER (LEN=1) :: sq !< name of scalar quantity
3252	CHARACTER (LEN=*) :: bc_b !< bottom boundary condition
3253	CHARACTER (LEN=*) :: bc_t !< top boundary condition
3254	CHARACTER (LEN=*) :: err_nr_b !< error number if bottom bc is unknown
3255	CHARACTER (LEN=*) :: err_nr_t !< error number if top bc is unknown
3256
3257	INTEGER(iwp) :: ibc_b !< index for bottom boundary condition
3258	INTEGER(iwp) :: ibc_t !< index for top boundary condition
3259
3260	!
3261	!-- Set Integer flags and check for possilbe errorneous settings for bottom
3262	!-- boundary condition
3263	IF ( bc_b == 'dirichlet' ) THEN
3264	ibc_b = 0
3265	ELSEIF ( bc_b == 'neumann' ) THEN
3266	ibc_b = 1
3267	ELSE
3268	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
3269	'_b ="' // TRIM( bc_b ) // '"'
3270	CALL message( 'check_parameters', err_nr_b, 1, 2, 0, 6, 0 )
3271	ENDIF
3272	!
3273	!-- Set Integer flags and check for possilbe errorneous settings for top
3274	!-- boundary condition
3275	IF ( bc_t == 'dirichlet' ) THEN
3276	ibc_t = 0
3277	ELSEIF ( bc_t == 'neumann' ) THEN
3278	ibc_t = 1
3279	ELSEIF ( bc_t == 'initial_gradient' ) THEN
3280	ibc_t = 2
3281	ELSEIF ( bc_t == 'nested' .OR. bc_t == 'nesting_offline' ) THEN
3282	ibc_t = 3
3283	ELSE
3284	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
3285	'_t ="' // TRIM( bc_t ) // '"'
3286	CALL message( 'check_parameters', err_nr_t, 1, 2, 0, 6, 0 )
3287	ENDIF
3288
3289
3290	END SUBROUTINE set_bc_scalars
3291
3292
3293
3294	!------------------------------------------------------------------------------!
3295	! Description:
3296	! ------------
3297	!> Check for consistent settings of bottom boundary conditions for humidity
3298	!> and scalars.
3299	!------------------------------------------------------------------------------!
3300
3301	SUBROUTINE check_bc_scalars( sq, bc_b, ibc_b, &
3302	err_nr_1, err_nr_2, &
3303	constant_flux, surface_initial_change )
3304
3305
3306	IMPLICIT NONE
3307
3308	CHARACTER (LEN=1) :: sq !< name of scalar quantity
3309	CHARACTER (LEN=*) :: bc_b !< bottom boundary condition
3310	CHARACTER (LEN=*) :: err_nr_1 !< error number of first error
3311	CHARACTER (LEN=*) :: err_nr_2 !< error number of second error
3312
3313	INTEGER(iwp) :: ibc_b !< index of bottom boundary condition
3314
3315	LOGICAL :: constant_flux !< flag for constant-flux layer
3316
3317	REAL(wp) :: surface_initial_change !< value of initial change at the surface
3318
3319	!
3320	!-- A given surface value implies Dirichlet boundary condition for
3321	!-- the respective quantity. In this case specification of a constant flux is
3322	!-- forbidden. However, an exception is made for large-scale forcing as well
3323	!-- as land-surface model.
3324	IF ( .NOT. land_surface .AND. .NOT. large_scale_forcing ) THEN
3325	IF ( ibc_b == 0 .AND. constant_flux ) THEN
3326	message_string = 'boundary condition: bc_' // TRIM( sq ) // &
3327	'_b ' // '= "' // TRIM( bc_b ) // &
3328	'" is not allowed with prescribed surface flux'
3329	CALL message( 'check_parameters', err_nr_1, 1, 2, 0, 6, 0 )
3330	ENDIF
3331	ENDIF
3332	IF ( constant_flux .AND. surface_initial_change /= 0.0_wp ) THEN
3333	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
3334	'wed with ', sq, '_surface_initial_change (/=0) = ', &
3335	surface_initial_change
3336	CALL message( 'check_parameters', err_nr_2, 1, 2, 0, 6, 0 )
3337	ENDIF
3338
3339
3340	END SUBROUTINE check_bc_scalars
3341
3342
3343
3344	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 4394

Download in other formats: