Home

Context Navigation

check_parameters.f90 @ 4366

Last change on this file since 4366 was 4360, checked in by suehring, 5 years ago

Bugfix in output of time-averaged plant-canopy quanities; Output of plant-canopy data only where tall canopy is defined; land-surface model: fix wrong location strings; tests: update urban test case; all source code files: copyright update

Property svn:keywords set to Id

Property svn:mergeinfo set to False

/palm/branches/chemistry/SOURCE/check_parameters.f90	2047-3190,3218-3297
/palm/branches/forwind/SOURCE/check_parameters.f90	1564-1913
/palm/branches/mosaik_M2/check_parameters.f90	2360-3471
/palm/branches/palm4u/SOURCE/check_parameters.f90	2540-2692
/palm/branches/rans/SOURCE/check_parameters.f90	2078-3128
/palm/branches/resler/SOURCE/check_parameters.f90	2023-4285
/palm/branches/salsa/SOURCE/check_parameters.f90	2503-3581

File size: 140.6 KB

Line
1	!> @file check_parameters.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2020 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! 4172 2019-08-20 11:55:33Z oliver.maas
27	! Checks for closed channel flow implemented
28	!
29	! 11:55:33Z oliver.maas
30	! Move 2-m potential temperature output to diagnostic_output_quantities
31	!
32	! 11:55:33Z oliver.maas
33	! removed message PA0421, concerning old parameter recycling_yshift
34	!
35	! 11:55:33Z oliver.maas
36	! adjust message to the modified parameter recycling_yshift
37	!
38	! 11:55:33Z oliver.maas
39	! Check if a cross section is specified if any output cross-section quantity
40	! is given
41	!
42	! 11:55:33Z oliver.maas
43	! Overwrite rotation_angle from namelist by value from static driver
44	!
45	! 11:55:33Z oliver.maas
46	! removed conversion from recycle_absolute_quantities to raq, added check and
47	! error message for correct input of recycling_method_for_thermodynamic_quantities
48	!
49	! 11:55:33Z oliver.maas
50	! Corrected "Former revisions" section
51	!
52	! 11:55:33Z oliver.maas
53	! bugfix error message: replaced PA184 by PA0184
54	!
55	! 11:55:33Z oliver.maas
56	! added conversion from recycle_absolute_quantities to raq for recycling of
57	! absolute quantities and added error message PA184 for not implemented quantities
58	!
59	! 4142 2019-08-05 12:38:31Z suehring
60	! Consider spinup in number of output timesteps for averaged 2D output (merge
61	! from branch resler).
62	!
63	! 4069 2019-07-01 14:05:51Z Giersch
64	! Masked output running index mid has been introduced as a local variable to
65	! avoid runtime error (Loop variable has been modified) in time_integration
66	!
67	! 4048 2019-06-21 21:00:21Z knoop
68	! Moved tcm_check_data_output to module_interface
69	!
70	! 4039 2019-06-18 10:32:41Z suehring
71	! Modularize diagnostic output
72	!
73	! 4017 2019-06-06 12:16:46Z schwenkel
74	! output of turbulence intensity added
75	!
76	! 3933 2019-04-25 12:33:20Z kanani
77	! Alphabetical resorting in CASE, condense settings for theta_2m* into one IF clause
78	!
79	! 3885 2019-04-11 11:29:34Z kanani
80	! Changes related to global restructuring of location messages and introduction
81	! of additional debug messages
82	!
83	! 3766 2019-02-26 16:23:41Z raasch
84	! trim added to avoid truncation compiler warnings
85	!
86	! 3761 2019-02-25 15:31:42Z raasch
87	! unused variables removed
88	!
89	! 3735 2019-02-12 09:52:40Z dom_dwd_user
90	! Passing variable j (averaged output?) to
91	! module_interface.f90:chem_check_data_output.
92	!
93	! 3705 2019-01-29 19:56:39Z suehring
94	! bugfix: renamed thetav_t to vtheta_t
95	!
96	! 3702 2019-01-28 13:19:30Z gronemeier
97	! most_method removed
98	!
99	! 3655 2019-01-07 16:51:22Z knoop
100	! Formatting
101	!
102	! Revision 1.1 1997/08/26 06:29:23 raasch
103	! Initial revision
104	!
105	!
106	! Description:
107	! ------------
108	!> Check control parameters and deduce further quantities.
109	!------------------------------------------------------------------------------!
110	SUBROUTINE check_parameters
111
112
113	USE arrays_3d
114
115	USE basic_constants_and_equations_mod
116
117	USE bulk_cloud_model_mod, &
118	ONLY: bulk_cloud_model
119
120	USE chem_modules
121
122	USE chemistry_model_mod, &
123	ONLY: chem_boundary_conds
124
125	USE control_parameters
126
127	USE grid_variables
128
129	USE kinds
130
131	USE indices
132
133	USE model_1d_mod, &
134	ONLY: damp_level_1d, damp_level_ind_1d
135
136	USE module_interface, &
137	ONLY: module_interface_check_parameters, &
138	module_interface_check_data_output_ts, &
139	module_interface_check_data_output_pr, &
140	module_interface_check_data_output
141
142	USE netcdf_data_input_mod, &
143	ONLY: init_model, input_pids_static, netcdf_data_input_check_dynamic, &
144	netcdf_data_input_check_static
145
146	USE netcdf_interface, &
147	ONLY: dopr_unit, do2d_unit, do3d_unit, netcdf_data_format, &
148	netcdf_data_format_string, dots_unit, heatflux_output_unit, &
149	waterflux_output_unit, momentumflux_output_unit, &
150	dots_max, dots_num, dots_label
151
152	USE particle_attributes, &
153	ONLY: particle_advection, use_sgs_for_particles
154
155	USE pegrid
156
157	USE pmc_interface, &
158	ONLY: cpl_id, nested_run
159
160	USE profil_parameter
161
162	USE statistics
163
164	USE subsidence_mod
165
166	USE transpose_indices
167
168	USE vertical_nesting_mod, &
169	ONLY: vnested, &
170	vnest_check_parameters
171
172
173	IMPLICIT NONE
174
175	CHARACTER (LEN=varnamelength) :: var !< variable name
176	CHARACTER (LEN=7) :: unit !< unit of variable
177	CHARACTER (LEN=8) :: date !< current date string
178	CHARACTER (LEN=10) :: time !< current time string
179	CHARACTER (LEN=20) :: ensemble_string !< string containing number of ensemble member
180	CHARACTER (LEN=15) :: nest_string !< string containing id of nested domain
181	CHARACTER (LEN=40) :: coupling_string !< string containing type of coupling
182	CHARACTER (LEN=100) :: action !< flag string
183
184	INTEGER(iwp) :: i !< loop index
185	INTEGER(iwp) :: ilen !< string length
186	INTEGER(iwp) :: j !< loop index
187	INTEGER(iwp) :: k !< loop index
188	INTEGER(iwp) :: kk !< loop index
189	INTEGER(iwp) :: mid !< masked output running index
190	INTEGER(iwp) :: netcdf_data_format_save !< initial value of netcdf_data_format
191	INTEGER(iwp) :: position !< index position of string
192
193	LOGICAL :: found !< flag, true if output variable is already marked for averaging
194
195	REAL(wp) :: dt_spinup_max !< maximum spinup timestep in nested domains
196	REAL(wp) :: gradient !< local gradient
197	REAL(wp) :: remote = 0.0_wp !< MPI id of remote processor
198	REAL(wp) :: spinup_time_max !< maximum spinup time in nested domains
199	REAL(wp) :: time_to_be_simulated_from_reference_point !< time to be simulated from reference point
200
201
202	CALL location_message( 'checking parameters', 'start' )
203	!
204	!-- At first, check static and dynamic input for consistency
205	CALL netcdf_data_input_check_dynamic
206	CALL netcdf_data_input_check_static
207	!
208	!-- Check for overlap combinations, which are not realized yet
209	IF ( transpose_compute_overlap .AND. numprocs == 1 ) THEN
210	message_string = 'transpose-compute-overlap not implemented for single PE runs'
211	CALL message( 'check_parameters', 'PA0000', 1, 2, 0, 6, 0 )
212	ENDIF
213
214	!
215	!-- Check the coupling mode
216	IF ( coupling_mode /= 'uncoupled' .AND. &
217	coupling_mode /= 'precursor_atmos' .AND. &
218	coupling_mode /= 'precursor_ocean' .AND. &
219	coupling_mode /= 'vnested_crse' .AND. &
220	coupling_mode /= 'vnested_fine' .AND. &
221	coupling_mode /= 'atmosphere_to_ocean' .AND. &
222	coupling_mode /= 'ocean_to_atmosphere' ) THEN
223	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
224	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
225	ENDIF
226
227	!
228	!-- Check if humidity is set to TRUE in case of the atmospheric run (for coupled runs)
229	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. .NOT. humidity) THEN
230	message_string = ' Humidity has to be set to .T. in the _p3d file ' // &
231	'for coupled runs between ocean and atmosphere.'
232	CALL message( 'check_parameters', 'PA0476', 1, 2, 0, 6, 0 )
233	ENDIF
234
235	!
236	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
237	IF ( coupling_mode /= 'uncoupled' .AND. &
238	coupling_mode(1:8) /= 'vnested_' .AND. &
239	coupling_mode /= 'precursor_atmos' .AND. &
240	coupling_mode /= 'precursor_ocean' ) THEN
241
242	IF ( dt_coupling == 9999999.9_wp ) THEN
243	message_string = 'dt_coupling is not set but required for coup' // &
244	'ling mode "' // TRIM( coupling_mode ) // '"'
245	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
246	ENDIF
247
248	#if defined( __parallel )
249
250
251	IF ( myid == 0 ) THEN
252	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
253	ierr )
254	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
255	status, ierr )
256	ENDIF
257	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
258
259	IF ( dt_coupling /= remote ) THEN
260	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
261	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
262	'dt_coupling_remote = ', remote
263	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
264	ENDIF
265	IF ( dt_coupling <= 0.0_wp ) THEN
266
267	IF ( myid == 0 ) THEN
268	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
269	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
270	status, ierr )
271	ENDIF
272	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
273
274	dt_coupling = MAX( dt_max, remote )
275	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
276	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
277	'MAX(dt_max(A,O)) = ', dt_coupling
278	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
279	ENDIF
280
281	IF ( myid == 0 ) THEN
282	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
283	ierr )
284	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
285	status, ierr )
286	ENDIF
287	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
288
289	IF ( restart_time /= remote ) THEN
290	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
291	'": restart_time = ', restart_time, '& is not equal to ', &
292	'restart_time_remote = ', remote
293	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
294	ENDIF
295
296	IF ( myid == 0 ) THEN
297	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
298	ierr )
299	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
300	status, ierr )
301	ENDIF
302	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
303
304	IF ( dt_restart /= remote ) THEN
305	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
306	'": dt_restart = ', dt_restart, '& is not equal to ', &
307	'dt_restart_remote = ', remote
308	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
309	ENDIF
310
311	time_to_be_simulated_from_reference_point = end_time-coupling_start_time
312
313	IF ( myid == 0 ) THEN
314	CALL MPI_SEND( time_to_be_simulated_from_reference_point, 1, &
315	MPI_REAL, target_id, 14, comm_inter, ierr )
316	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
317	status, ierr )
318	ENDIF
319	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
320
321	IF ( time_to_be_simulated_from_reference_point /= remote ) THEN
322	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
323	'": time_to_be_simulated_from_reference_point = ', &
324	time_to_be_simulated_from_reference_point, '& is not equal ', &
325	'to time_to_be_simulated_from_reference_point_remote = ', &
326	remote
327	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
328	ENDIF
329
330	IF ( myid == 0 ) THEN
331	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
332	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
333	status, ierr )
334	ENDIF
335	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
336
337
338	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
339
340	IF ( dx < remote ) THEN
341	WRITE( message_string, * ) 'coupling mode "', &
342	TRIM( coupling_mode ), &
343	'": dx in Atmosphere is not equal to or not larger than dx in ocean'
344	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
345	ENDIF
346
347	IF ( (nx_a+1)dx /= (nx_o+1)remote ) THEN
348	WRITE( message_string, * ) 'coupling mode "', &
349	TRIM( coupling_mode ), &
350	'": Domain size in x-direction is not equal in ocean and atmosphere'
351	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
352	ENDIF
353
354	ENDIF
355
356	IF ( myid == 0) THEN
357	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
358	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
359	status, ierr )
360	ENDIF
361	CALL MPI_BCAST( remote, 1, MPI_REAL, 0, comm2d, ierr)
362
363	IF ( coupling_mode == 'atmosphere_to_ocean') THEN
364
365	IF ( dy < remote ) THEN
366	WRITE( message_string, * ) 'coupling mode "', &
367	TRIM( coupling_mode ), &
368	'": dy in Atmosphere is not equal to or not larger than dy in ocean'
369	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
370	ENDIF
371
372	IF ( (ny_a+1)dy /= (ny_o+1)remote ) THEN
373	WRITE( message_string, * ) 'coupling mode "', &
374	TRIM( coupling_mode ), &
375	'": Domain size in y-direction is not equal in ocean and atmosphere'
376	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
377	ENDIF
378
379	IF ( MOD(nx_o+1,nx_a+1) /= 0 ) THEN
380	WRITE( message_string, * ) 'coupling mode "', &
381	TRIM( coupling_mode ), &
382	'": nx+1 in ocean is not divisible by nx+1 in', &
383	' atmosphere without remainder'
384	CALL message( 'check_parameters', 'PA0339', 1, 2, 0, 6, 0 )
385	ENDIF
386
387	IF ( MOD(ny_o+1,ny_a+1) /= 0 ) THEN
388	WRITE( message_string, * ) 'coupling mode "', &
389	TRIM( coupling_mode ), &
390	'": ny+1 in ocean is not divisible by ny+1 in', &
391	' atmosphere without remainder'
392
393	CALL message( 'check_parameters', 'PA0340', 1, 2, 0, 6, 0 )
394	ENDIF
395
396	ENDIF
397	#else
398	WRITE( message_string, * ) 'coupling requires PALM to be compiled with',&
399	' cpp-option "-D__parallel"'
400	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
401	#endif
402	ENDIF
403
404	#if defined( __parallel )
405	!
406	!-- Exchange via intercommunicator
407	IF ( coupling_mode == 'atmosphere_to_ocean' .AND. myid == 0 ) THEN
408	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
409	ierr )
410	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' .AND. myid == 0) THEN
411	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
412	comm_inter, status, ierr )
413	ENDIF
414	CALL MPI_BCAST( humidity_remote, 1, MPI_LOGICAL, 0, comm2d, ierr)
415
416	#endif
417
418	!
419	!-- User settings for restart times requires that "restart" has been given as
420	!-- file activation string. Otherwise, binary output would not be saved by
421	!-- palmrun.
422	IF ( ( restart_time /= 9999999.9_wp .OR. dt_restart /= 9999999.9_wp ) &
423	.AND. .NOT. write_binary ) THEN
424	WRITE( message_string, * ) 'manual restart settings requires file ', &
425	'activation string "restart"'
426	CALL message( 'check_parameters', 'PA0001', 1, 2, 0, 6, 0 )
427	ENDIF
428
429
430	!
431	!-- Generate the file header which is used as a header for most of PALM's
432	!-- output files
433	CALL DATE_AND_TIME( date, time, run_zone )
434	run_date = date(1:4)//'-'//date(5:6)//'-'//date(7:8)
435	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
436	IF ( coupling_mode == 'uncoupled' ) THEN
437	coupling_string = ''
438	ELSEIF ( coupling_mode == 'vnested_crse' ) THEN
439	coupling_string = ' nested (coarse)'
440	ELSEIF ( coupling_mode == 'vnested_fine' ) THEN
441	coupling_string = ' nested (fine)'
442	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
443	coupling_string = ' coupled (atmosphere)'
444	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
445	coupling_string = ' coupled (ocean)'
446	ENDIF
447	IF ( ensemble_member_nr /= 0 ) THEN
448	WRITE( ensemble_string, '(2X,A,I2.2)' ) 'en-no: ', ensemble_member_nr
449	ELSE
450	ensemble_string = ''
451	ENDIF
452	IF ( nested_run ) THEN
453	WRITE( nest_string, '(2X,A,I2.2)' ) 'nest-id: ', cpl_id
454	ELSE
455	nest_string = ''
456	ENDIF
457
458	WRITE ( run_description_header, &
459	'(A,2X,A,2X,A,A,A,I2.2,A,A,A,2X,A,A,2X,A,1X,A)' ) &
460	TRIM( version ), TRIM( revision ), 'run: ', &
461	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
462	TRIM( nest_string ), TRIM( ensemble_string), 'host: ', TRIM( host ), &
463	run_date, run_time
464
465	!
466	!-- Check the general loop optimization method
467	SELECT CASE ( TRIM( loop_optimization ) )
468
469	CASE ( 'cache', 'vector' )
470	CONTINUE
471
472	CASE DEFAULT
473	message_string = 'illegal value given for loop_optimization: "' // &
474	TRIM( loop_optimization ) // '"'
475	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
476
477	END SELECT
478
479	!
480	!-- Check topography setting (check for illegal parameter combinations)
481	IF ( topography /= 'flat' ) THEN
482	action = ' '
483	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' &
484	) THEN
485	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
486	ENDIF
487	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme' )&
488	THEN
489	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
490	ENDIF
491	IF ( psolver == 'sor' ) THEN
492	WRITE( action, '(A,A)' ) 'psolver = ', psolver
493	ENDIF
494	IF ( sloping_surface ) THEN
495	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
496	ENDIF
497	IF ( galilei_transformation ) THEN
498	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
499	ENDIF
500	IF ( cloud_droplets ) THEN
501	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
502	ENDIF
503	IF ( .NOT. constant_flux_layer .AND. topography /= 'closed_channel' ) &
504	THEN
505	WRITE( action, '(A)' ) 'constant_flux_layer = .FALSE.'
506	ENDIF
507	IF ( action /= ' ' ) THEN
508	message_string = 'The specified topography does not allow ' // &
509	TRIM( action )
510	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
511	ENDIF
512	!
513	!-- Check illegal/untested parameter combinations for closed channel
514	If ( topography == 'closed_channel' ) THEN
515	symmetry_flag = 1
516	message_string = 'Bottom and top boundary are treated equal'
517	CALL message( 'check_parameters', 'PA0676', 0, 0, 0, 6, 0 )
518
519	IF ( dz(1) /= dz(COUNT( dz /= -1.0_wp )) .OR. &
520	dz_stretch_level /= -9999999.9_wp) THEN
521	WRITE( message_string, * ) 'dz should be equal close to the ' // &
522	'boundaries due to symmetrical problem'
523	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
524	ENDIF
525
526	IF ( constant_flux_layer ) THEN
527	WRITE( message_string, * ) 'A constant flux layer is not '// &
528	'allowed if a closed channel '// &
529	'shall be used'
530	CALL message( 'check_parameters', 'PA0688', 1, 2, 0, 6, 0 )
531	ENDIF
532
533	IF ( ocean_mode ) THEN
534	WRITE( message_string, * ) 'The ocean mode is not allowed if '// &
535	'a closed channel shall be used'
536	CALL message( 'check_parameters', 'PA0689', 1, 2, 0, 6, 0 )
537	ENDIF
538
539	IF ( momentum_advec /= 'ws-scheme' .OR. &
540	scalar_advec /= 'ws-scheme' ) THEN
541	WRITE( message_string, * ) 'A closed channel require the '// &
542	'upwind scheme of Wicker and ' // &
543	'Skamarock as the advection scheme'
544	CALL message( 'check_parameters', 'PA0690', 1, 2, 0, 6, 0 )
545	ENDIF
546	ENDIF
547	ENDIF
548
549	!
550	!-- Check approximation
551	IF ( TRIM( approximation ) /= 'boussinesq' .AND. &
552	TRIM( approximation ) /= 'anelastic' ) THEN
553	message_string = 'unknown approximation: approximation = "' // &
554	TRIM( approximation ) // '"'
555	CALL message( 'check_parameters', 'PA0446', 1, 2, 0, 6, 0 )
556	ENDIF
557
558	!
559	!-- Check approximation requirements
560	IF ( TRIM( approximation ) == 'anelastic' .AND. &
561	TRIM( momentum_advec ) /= 'ws-scheme' ) THEN
562	message_string = 'Anelastic approximation requires ' // &
563	'momentum_advec = "ws-scheme"'
564	CALL message( 'check_parameters', 'PA0447', 1, 2, 0, 6, 0 )
565	ENDIF
566	IF ( TRIM( approximation ) == 'anelastic' .AND. &
567	TRIM( psolver ) == 'multigrid' ) THEN
568	message_string = 'Anelastic approximation currently only supports ' // &
569	'psolver = "poisfft", ' // &
570	'psolver = "sor" and ' // &
571	'psolver = "multigrid_noopt"'
572	CALL message( 'check_parameters', 'PA0448', 1, 2, 0, 6, 0 )
573	ENDIF
574	IF ( TRIM( approximation ) == 'anelastic' .AND. &
575	conserve_volume_flow ) THEN
576	message_string = 'Anelastic approximation is not allowed with ' // &
577	'conserve_volume_flow = .TRUE.'
578	CALL message( 'check_parameters', 'PA0449', 1, 2, 0, 6, 0 )
579	ENDIF
580
581	!
582	!-- Check flux input mode
583	IF ( TRIM( flux_input_mode ) /= 'dynamic' .AND. &
584	TRIM( flux_input_mode ) /= 'kinematic' .AND. &
585	TRIM( flux_input_mode ) /= 'approximation-specific' ) THEN
586	message_string = 'unknown flux input mode: flux_input_mode = "' // &
587	TRIM( flux_input_mode ) // '"'
588	CALL message( 'check_parameters', 'PA0450', 1, 2, 0, 6, 0 )
589	ENDIF
590	!
591	!-- Set flux input mode according to approximation if applicable
592	IF ( TRIM( flux_input_mode ) == 'approximation-specific' ) THEN
593	IF ( TRIM( approximation ) == 'anelastic' ) THEN
594	flux_input_mode = 'dynamic'
595	ELSEIF ( TRIM( approximation ) == 'boussinesq' ) THEN
596	flux_input_mode = 'kinematic'
597	ENDIF
598	ENDIF
599
600	!
601	!-- Check flux output mode
602	IF ( TRIM( flux_output_mode ) /= 'dynamic' .AND. &
603	TRIM( flux_output_mode ) /= 'kinematic' .AND. &
604	TRIM( flux_output_mode ) /= 'approximation-specific' ) THEN
605	message_string = 'unknown flux output mode: flux_output_mode = "' // &
606	TRIM( flux_output_mode ) // '"'
607	CALL message( 'check_parameters', 'PA0451', 1, 2, 0, 6, 0 )
608	ENDIF
609	!
610	!-- Set flux output mode according to approximation if applicable
611	IF ( TRIM( flux_output_mode ) == 'approximation-specific' ) THEN
612	IF ( TRIM( approximation ) == 'anelastic' ) THEN
613	flux_output_mode = 'dynamic'
614	ELSEIF ( TRIM( approximation ) == 'boussinesq' ) THEN
615	flux_output_mode = 'kinematic'
616	ENDIF
617	ENDIF
618
619
620	!
621	!-- When the land- or urban-surface model is used, the flux output must be
622	!-- dynamic.
623	IF ( land_surface .OR. urban_surface ) THEN
624	flux_output_mode = 'dynamic'
625	ENDIF
626
627	!
628	!-- Set the flux output units according to flux_output_mode
629	IF ( TRIM( flux_output_mode ) == 'kinematic' ) THEN
630	heatflux_output_unit = 'K m/s'
631	waterflux_output_unit = 'kg/kg m/s'
632	momentumflux_output_unit = 'm2/s2'
633	ELSEIF ( TRIM( flux_output_mode ) == 'dynamic' ) THEN
634	heatflux_output_unit = 'W/m2'
635	waterflux_output_unit = 'W/m2'
636	momentumflux_output_unit = 'N/m2'
637	ENDIF
638
639	!
640	!-- set time series output units for fluxes
641	dots_unit(14:16) = TRIM( heatflux_output_unit )
642	dots_unit(21) = TRIM( waterflux_output_unit )
643	dots_unit(19:20) = TRIM( momentumflux_output_unit )
644
645	!
646	!-- Add other module specific timeseries
647	CALL module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
648
649	!
650	!-- Check if maximum number of allowed timeseries is exceeded
651	IF ( dots_num > dots_max ) THEN
652	WRITE( message_string, * ) 'number of time series quantities exceeds', &
653	' its maximum of dots_max = ', dots_max, &
654	'&Please increase dots_max in modules.f90.'
655	CALL message( 'init_3d_model', 'PA0194', 1, 2, 0, 6, 0 )
656	ENDIF
657
658	!
659	!-- Check whether there are any illegal values
660	!-- Pressure solver:
661	IF ( psolver /= 'poisfft' .AND. psolver /= 'sor' .AND. &
662	psolver /= 'multigrid' .AND. psolver /= 'multigrid_noopt' ) THEN
663	message_string = 'unknown solver for perturbation pressure: psolver' // &
664	' = "' // TRIM( psolver ) // '"'
665	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
666	ENDIF
667
668	IF ( psolver(1:9) == 'multigrid' ) THEN
669	IF ( cycle_mg == 'w' ) THEN
670	gamma_mg = 2
671	ELSEIF ( cycle_mg == 'v' ) THEN
672	gamma_mg = 1
673	ELSE
674	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
675	TRIM( cycle_mg ) // '"'
676	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
677	ENDIF
678	ENDIF
679
680	IF ( fft_method /= 'singleton-algorithm' .AND. &
681	fft_method /= 'temperton-algorithm' .AND. &
682	fft_method /= 'fftw' .AND. &
683	fft_method /= 'system-specific' ) THEN
684	message_string = 'unknown fft-algorithm: fft_method = "' // &
685	TRIM( fft_method ) // '"'
686	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
687	ENDIF
688
689	IF( momentum_advec == 'ws-scheme' .AND. &
690	.NOT. call_psolver_at_all_substeps ) THEN
691	message_string = 'psolver must be called at each RK3 substep when "'// &
692	TRIM(momentum_advec) // ' "is used for momentum_advec'
693	CALL message( 'check_parameters', 'PA0344', 1, 2, 0, 6, 0 )
694	END IF
695	!
696	!-- Advection schemes:
697	IF ( momentum_advec /= 'pw-scheme' .AND. &
698	momentum_advec /= 'ws-scheme' .AND. &
699	momentum_advec /= 'up-scheme' ) &
700	THEN
701	message_string = 'unknown advection scheme: momentum_advec = "' // &
702	TRIM( momentum_advec ) // '"'
703	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
704	ENDIF
705	IF ( ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
706	.AND. ( timestep_scheme == 'euler' .OR. &
707	timestep_scheme == 'runge-kutta-2' ) ) &
708	THEN
709	message_string = 'momentum_advec or scalar_advec = "' &
710	// TRIM( momentum_advec ) // '" is not allowed with ' // &
711	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
712	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
713	ENDIF
714	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'ws-scheme' .AND. &
715	scalar_advec /= 'bc-scheme' .AND. scalar_advec /= 'up-scheme' ) &
716	THEN
717	message_string = 'unknown advection scheme: scalar_advec = "' // &
718	TRIM( scalar_advec ) // '"'
719	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
720	ENDIF
721	IF ( scalar_advec == 'bc-scheme' .AND. loop_optimization == 'cache' ) &
722	THEN
723	message_string = 'advection_scheme scalar_advec = "' &
724	// TRIM( scalar_advec ) // '" not implemented for ' // &
725	'loop_optimization = "' // TRIM( loop_optimization ) // '"'
726	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
727	ENDIF
728
729	IF ( use_sgs_for_particles .AND. .NOT. cloud_droplets .AND. &
730	.NOT. use_upstream_for_tke .AND. &
731	scalar_advec /= 'ws-scheme' &
732	) THEN
733	use_upstream_for_tke = .TRUE.
734	message_string = 'use_upstream_for_tke is set to .TRUE. because ' // &
735	'use_sgs_for_particles = .TRUE. ' // &
736	'and scalar_advec /= ws-scheme'
737	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
738	ENDIF
739
740	!
741	!-- Set LOGICAL switches to enhance performance
742	IF ( momentum_advec == 'ws-scheme' ) ws_scheme_mom = .TRUE.
743	IF ( scalar_advec == 'ws-scheme' ) ws_scheme_sca = .TRUE.
744
745
746	!
747	!-- Timestep schemes:
748	SELECT CASE ( TRIM( timestep_scheme ) )
749
750	CASE ( 'euler' )
751	intermediate_timestep_count_max = 1
752
753	CASE ( 'runge-kutta-2' )
754	intermediate_timestep_count_max = 2
755
756	CASE ( 'runge-kutta-3' )
757	intermediate_timestep_count_max = 3
758
759	CASE DEFAULT
760	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
761	TRIM( timestep_scheme ) // '"'
762	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
763
764	END SELECT
765
766	IF ( (momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ws-scheme') &
767	.AND. timestep_scheme(1:5) == 'runge' ) THEN
768	message_string = 'momentum advection scheme "' // &
769	TRIM( momentum_advec ) // '" & does not work with ' // &
770	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
771	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
772	ENDIF
773	!
774	!-- Check for proper settings for microphysics
775	IF ( bulk_cloud_model .AND. cloud_droplets ) THEN
776	message_string = 'bulk_cloud_model = .TRUE. is not allowed with ' // &
777	'cloud_droplets = .TRUE.'
778	CALL message( 'check_parameters', 'PA0442', 1, 2, 0, 6, 0 )
779	ENDIF
780
781	!
782	!-- Initializing actions must have been set by the user
783	IF ( TRIM( initializing_actions ) == '' ) THEN
784	message_string = 'no value specified for initializing_actions'
785	CALL message( 'check_parameters', 'PA0149', 1, 2, 0, 6, 0 )
786	ENDIF
787
788	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
789	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
790	!
791	!-- No restart run: several initialising actions are possible
792	action = initializing_actions
793	DO WHILE ( TRIM( action ) /= '' )
794	position = INDEX( action, ' ' )
795	SELECT CASE ( action(1:position-1) )
796
797	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
798	'by_user', 'initialize_vortex', 'initialize_ptanom', &
799	'initialize_bubble', 'inifor' )
800	action = action(position+1:)
801
802	CASE DEFAULT
803	message_string = 'initializing_action = "' // &
804	TRIM( action ) // '" unknown or not allowed'
805	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
806
807	END SELECT
808	ENDDO
809	ENDIF
810
811	IF ( TRIM( initializing_actions ) == 'initialize_vortex' .AND. &
812	conserve_volume_flow ) THEN
813	message_string = 'initializing_actions = "initialize_vortex"' // &
814	' is not allowed with conserve_volume_flow = .T.'
815	CALL message( 'check_parameters', 'PA0343', 1, 2, 0, 6, 0 )
816	ENDIF
817
818
819	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
820	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
821	message_string = 'initializing_actions = "set_constant_profiles"' // &
822	' and "set_1d-model_profiles" are not allowed ' // &
823	'simultaneously'
824	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
825	ENDIF
826
827	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
828	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
829	message_string = 'initializing_actions = "set_constant_profiles"' // &
830	' and "by_user" are not allowed simultaneously'
831	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
832	ENDIF
833
834	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
835	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
836	message_string = 'initializing_actions = "by_user" and ' // &
837	'"set_1d-model_profiles" are not allowed simultaneously'
838	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
839	ENDIF
840	!
841	!-- In case of spinup and nested run, spinup end time must be identical
842	!-- in order to have synchronously running simulations.
843	IF ( nested_run ) THEN
844	#if defined( __parallel )
845	CALL MPI_ALLREDUCE( spinup_time, spinup_time_max, 1, MPI_REAL, &
846	MPI_MAX, MPI_COMM_WORLD, ierr )
847	CALL MPI_ALLREDUCE( dt_spinup, dt_spinup_max, 1, MPI_REAL, &
848	MPI_MAX, MPI_COMM_WORLD, ierr )
849
850	IF ( spinup_time /= spinup_time_max .OR. dt_spinup /= dt_spinup_max ) &
851	THEN
852	message_string = 'In case of nesting, spinup_time and ' // &
853	'dt_spinup must be identical in all parent ' // &
854	'and child domains.'
855	CALL message( 'check_parameters', 'PA0489', 3, 2, 0, 6, 0 )
856	ENDIF
857	#endif
858	ENDIF
859
860	IF ( bulk_cloud_model .AND. .NOT. humidity ) THEN
861	WRITE( message_string, * ) 'bulk_cloud_model = ', bulk_cloud_model, &
862	' is not allowed with humidity = ', humidity
863	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
864	ENDIF
865
866	IF ( humidity .AND. sloping_surface ) THEN
867	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
868	'are not allowed simultaneously'
869	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
870	ENDIF
871
872	!-- Check the module settings
873	CALL module_interface_check_parameters
874
875	!
876	!-- In case of no restart run, check initialising parameters and calculate
877	!-- further quantities
878	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
879
880	!
881	!-- Initial profiles for 1D and 3D model, respectively (u,v further below)
882	pt_init = pt_surface
883	IF ( humidity ) q_init = q_surface
884	IF ( passive_scalar ) s_init = s_surface
885
886	!--
887	!-- If required, compute initial profile of the geostrophic wind
888	!-- (component ug)
889	i = 1
890	gradient = 0.0_wp
891
892	IF ( .NOT. ocean_mode ) THEN
893
894	ug_vertical_gradient_level_ind(1) = 0
895	ug(0) = ug_surface
896	DO k = 1, nzt+1
897	IF ( i < 11 ) THEN
898	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
899	ug_vertical_gradient_level(i) >= 0.0_wp ) THEN
900	gradient = ug_vertical_gradient(i) / 100.0_wp
901	ug_vertical_gradient_level_ind(i) = k - 1
902	i = i + 1
903	ENDIF
904	ENDIF
905	IF ( gradient /= 0.0_wp ) THEN
906	IF ( k /= 1 ) THEN
907	ug(k) = ug(k-1) + dzu(k) * gradient
908	ELSE
909	ug(k) = ug_surface + dzu(k) * gradient
910	ENDIF
911	ELSE
912	ug(k) = ug(k-1)
913	ENDIF
914	ENDDO
915
916	ELSE
917
918	ug_vertical_gradient_level_ind(1) = nzt+1
919	ug(nzt+1) = ug_surface
920	DO k = nzt, nzb, -1
921	IF ( i < 11 ) THEN
922	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
923	ug_vertical_gradient_level(i) <= 0.0_wp ) THEN
924	gradient = ug_vertical_gradient(i) / 100.0_wp
925	ug_vertical_gradient_level_ind(i) = k + 1
926	i = i + 1
927	ENDIF
928	ENDIF
929	IF ( gradient /= 0.0_wp ) THEN
930	IF ( k /= nzt ) THEN
931	ug(k) = ug(k+1) - dzu(k+1) * gradient
932	ELSE
933	ug(k) = ug_surface - 0.5_wp * dzu(k+1) * gradient
934	ug(k+1) = ug_surface + 0.5_wp * dzu(k+1) * gradient
935	ENDIF
936	ELSE
937	ug(k) = ug(k+1)
938	ENDIF
939	ENDDO
940
941	ENDIF
942
943	!
944	!-- In case of no given gradients for ug, choose a zero gradient
945	IF ( ug_vertical_gradient_level(1) == -9999999.9_wp ) THEN
946	ug_vertical_gradient_level(1) = 0.0_wp
947	ENDIF
948
949	!
950	!--
951	!-- If required, compute initial profile of the geostrophic wind
952	!-- (component vg)
953	i = 1
954	gradient = 0.0_wp
955
956	IF ( .NOT. ocean_mode ) THEN
957
958	vg_vertical_gradient_level_ind(1) = 0
959	vg(0) = vg_surface
960	DO k = 1, nzt+1
961	IF ( i < 11 ) THEN
962	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
963	vg_vertical_gradient_level(i) >= 0.0_wp ) THEN
964	gradient = vg_vertical_gradient(i) / 100.0_wp
965	vg_vertical_gradient_level_ind(i) = k - 1
966	i = i + 1
967	ENDIF
968	ENDIF
969	IF ( gradient /= 0.0_wp ) THEN
970	IF ( k /= 1 ) THEN
971	vg(k) = vg(k-1) + dzu(k) * gradient
972	ELSE
973	vg(k) = vg_surface + dzu(k) * gradient
974	ENDIF
975	ELSE
976	vg(k) = vg(k-1)
977	ENDIF
978	ENDDO
979
980	ELSE
981
982	vg_vertical_gradient_level_ind(1) = nzt+1
983	vg(nzt+1) = vg_surface
984	DO k = nzt, nzb, -1
985	IF ( i < 11 ) THEN
986	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
987	vg_vertical_gradient_level(i) <= 0.0_wp ) THEN
988	gradient = vg_vertical_gradient(i) / 100.0_wp
989	vg_vertical_gradient_level_ind(i) = k + 1
990	i = i + 1
991	ENDIF
992	ENDIF
993	IF ( gradient /= 0.0_wp ) THEN
994	IF ( k /= nzt ) THEN
995	vg(k) = vg(k+1) - dzu(k+1) * gradient
996	ELSE
997	vg(k) = vg_surface - 0.5_wp * dzu(k+1) * gradient
998	vg(k+1) = vg_surface + 0.5_wp * dzu(k+1) * gradient
999	ENDIF
1000	ELSE
1001	vg(k) = vg(k+1)
1002	ENDIF
1003	ENDDO
1004
1005	ENDIF
1006
1007	!
1008	!-- In case of no given gradients for vg, choose a zero gradient
1009	IF ( vg_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1010	vg_vertical_gradient_level(1) = 0.0_wp
1011	ENDIF
1012
1013	!
1014	!-- Let the initial wind profiles be the calculated ug/vg profiles or
1015	!-- interpolate them from wind profile data (if given)
1016	IF ( u_profile(1) == 9999999.9_wp .AND. v_profile(1) == 9999999.9_wp ) THEN
1017
1018	u_init = ug
1019	v_init = vg
1020
1021	ELSEIF ( u_profile(1) == 0.0_wp .AND. v_profile(1) == 0.0_wp ) THEN
1022
1023	IF ( uv_heights(1) /= 0.0_wp ) THEN
1024	message_string = 'uv_heights(1) must be 0.0'
1025	CALL message( 'check_parameters', 'PA0345', 1, 2, 0, 6, 0 )
1026	ENDIF
1027
1028	IF ( omega /= 0.0_wp ) THEN
1029	message_string = 'Coriolis force must be switched off (by setting omega=0.0)' // &
1030	' when prescribing the forcing by u_profile and v_profile'
1031	CALL message( 'check_parameters', 'PA0347', 1, 2, 0, 6, 0 )
1032	ENDIF
1033
1034	use_prescribed_profile_data = .TRUE.
1035
1036	kk = 1
1037	u_init(0) = 0.0_wp
1038	v_init(0) = 0.0_wp
1039
1040	DO k = 1, nz+1
1041
1042	IF ( kk < 200 ) THEN
1043	DO WHILE ( uv_heights(kk+1) <= zu(k) )
1044	kk = kk + 1
1045	IF ( kk == 200 ) EXIT
1046	ENDDO
1047	ENDIF
1048
1049	IF ( kk < 200 .AND. uv_heights(kk+1) /= 9999999.9_wp ) THEN
1050	u_init(k) = u_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1051	( uv_heights(kk+1) - uv_heights(kk) ) * &
1052	( u_profile(kk+1) - u_profile(kk) )
1053	v_init(k) = v_profile(kk) + ( zu(k) - uv_heights(kk) ) / &
1054	( uv_heights(kk+1) - uv_heights(kk) ) * &
1055	( v_profile(kk+1) - v_profile(kk) )
1056	ELSE
1057	u_init(k) = u_profile(kk)
1058	v_init(k) = v_profile(kk)
1059	ENDIF
1060
1061	ENDDO
1062
1063	ELSE
1064
1065	message_string = 'u_profile(1) and v_profile(1) must be 0.0'
1066	CALL message( 'check_parameters', 'PA0346', 1, 2, 0, 6, 0 )
1067
1068	ENDIF
1069
1070	!
1071	!-- Compute initial temperature profile using the given temperature gradients
1072	IF ( .NOT. neutral ) THEN
1073	CALL init_vertical_profiles( pt_vertical_gradient_level_ind, &
1074	pt_vertical_gradient_level, &
1075	pt_vertical_gradient, pt_init, &
1076	pt_surface, bc_pt_t_val )
1077	ENDIF
1078	!
1079	!-- Compute initial humidity profile using the given humidity gradients
1080	IF ( humidity ) THEN
1081	CALL init_vertical_profiles( q_vertical_gradient_level_ind, &
1082	q_vertical_gradient_level, &
1083	q_vertical_gradient, q_init, &
1084	q_surface, bc_q_t_val )
1085	ENDIF
1086	!
1087	!-- Compute initial scalar profile using the given scalar gradients
1088	IF ( passive_scalar ) THEN
1089	CALL init_vertical_profiles( s_vertical_gradient_level_ind, &
1090	s_vertical_gradient_level, &
1091	s_vertical_gradient, s_init, &
1092	s_surface, bc_s_t_val )
1093	ENDIF
1094	!
1095	!-- TODO
1096	!-- Compute initial chemistry profile using the given chemical species gradients
1097	!-- Russo: Is done in chem_init --> kanani: Revise
1098
1099	ENDIF
1100
1101	!
1102	!-- Check if the control parameter use_subsidence_tendencies is used correctly
1103	IF ( use_subsidence_tendencies .AND. .NOT. large_scale_subsidence ) THEN
1104	message_string = 'The usage of use_subsidence_tendencies ' // &
1105	'requires large_scale_subsidence = .T..'
1106	CALL message( 'check_parameters', 'PA0396', 1, 2, 0, 6, 0 )
1107	ELSEIF ( use_subsidence_tendencies .AND. .NOT. large_scale_forcing ) THEN
1108	message_string = 'The usage of use_subsidence_tendencies ' // &
1109	'requires large_scale_forcing = .T..'
1110	CALL message( 'check_parameters', 'PA0397', 1, 2, 0, 6, 0 )
1111	ENDIF
1112
1113	!
1114	!-- Initialize large scale subsidence if required
1115	If ( large_scale_subsidence ) THEN
1116	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp .AND. &
1117	.NOT. large_scale_forcing ) THEN
1118	CALL init_w_subsidence
1119	ENDIF
1120	!
1121	!-- In case large_scale_forcing is used, profiles for subsidence velocity
1122	!-- are read in from file LSF_DATA
1123
1124	IF ( subs_vertical_gradient_level(1) == -9999999.9_wp .AND. &
1125	.NOT. large_scale_forcing ) THEN
1126	message_string = 'There is no default large scale vertical ' // &
1127	'velocity profile set. Specify the subsidence ' // &
1128	'velocity profile via subs_vertical_gradient ' // &
1129	'and subs_vertical_gradient_level.'
1130	CALL message( 'check_parameters', 'PA0380', 1, 2, 0, 6, 0 )
1131	ENDIF
1132	ELSE
1133	IF ( subs_vertical_gradient_level(1) /= -9999999.9_wp ) THEN
1134	message_string = 'Enable usage of large scale subsidence by ' // &
1135	'setting large_scale_subsidence = .T..'
1136	CALL message( 'check_parameters', 'PA0381', 1, 2, 0, 6, 0 )
1137	ENDIF
1138	ENDIF
1139
1140	!
1141	!-- Overwrite parameters from namelist if necessary and compute Coriolis parameter.
1142	!-- @todo - move initialization of f and fs to coriolis_mod.
1143	IF ( input_pids_static ) THEN
1144	latitude = init_model%latitude
1145	longitude = init_model%longitude
1146	rotation_angle = init_model%rotation_angle
1147	ENDIF
1148
1149	f = 2.0_wp * omega * SIN( latitude / 180.0_wp * pi )
1150	fs = 2.0_wp * omega * COS( latitude / 180.0_wp * pi )
1151
1152	!
1153	!-- Check and set buoyancy related parameters and switches
1154	IF ( reference_state == 'horizontal_average' ) THEN
1155	CONTINUE
1156	ELSEIF ( reference_state == 'initial_profile' ) THEN
1157	use_initial_profile_as_reference = .TRUE.
1158	ELSEIF ( reference_state == 'single_value' ) THEN
1159	use_single_reference_value = .TRUE.
1160	IF ( pt_reference == 9999999.9_wp ) pt_reference = pt_surface
1161	vpt_reference = pt_reference * ( 1.0_wp + 0.61_wp * q_surface )
1162	ELSE
1163	message_string = 'illegal value for reference_state: "' // &
1164	TRIM( reference_state ) // '"'
1165	CALL message( 'check_parameters', 'PA0056', 1, 2, 0, 6, 0 )
1166	ENDIF
1167
1168	!
1169	!-- In case of a given slope, compute the relevant quantities
1170	IF ( alpha_surface /= 0.0_wp ) THEN
1171	IF ( ABS( alpha_surface ) > 90.0_wp ) THEN
1172	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1173	' ) must be < 90.0'
1174	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1175	ENDIF
1176	sloping_surface = .TRUE.
1177	cos_alpha_surface = COS( alpha_surface / 180.0_wp * pi )
1178	sin_alpha_surface = SIN( alpha_surface / 180.0_wp * pi )
1179	ENDIF
1180
1181	!
1182	!-- Check time step and cfl_factor
1183	IF ( dt /= -1.0_wp ) THEN
1184	IF ( dt <= 0.0_wp ) THEN
1185	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1186	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1187	ENDIF
1188	dt_3d = dt
1189	dt_fixed = .TRUE.
1190	ENDIF
1191
1192	IF ( cfl_factor <= 0.0_wp .OR. cfl_factor > 1.0_wp ) THEN
1193	IF ( cfl_factor == -1.0_wp ) THEN
1194	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1195	cfl_factor = 0.8_wp
1196	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1197	cfl_factor = 0.9_wp
1198	ELSE
1199	cfl_factor = 0.9_wp
1200	ENDIF
1201	ELSE
1202	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1203	' out of range &0.0 < cfl_factor <= 1.0 is required'
1204	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1205	ENDIF
1206	ENDIF
1207
1208	!
1209	!-- Store simulated time at begin
1210	simulated_time_at_begin = simulated_time
1211
1212	!
1213	!-- Store reference time for coupled runs and change the coupling flag,
1214	!-- if ...
1215	IF ( simulated_time == 0.0_wp ) THEN
1216	IF ( coupling_start_time == 0.0_wp ) THEN
1217	time_since_reference_point = 0.0_wp
1218	ELSEIF ( time_since_reference_point < 0.0_wp ) THEN
1219	run_coupled = .FALSE.
1220	ENDIF
1221	ENDIF
1222
1223	!
1224	!-- Set wind speed in the Galilei-transformed system
1225	IF ( galilei_transformation ) THEN
1226	IF ( use_ug_for_galilei_tr .AND. &
1227	ug_vertical_gradient_level(1) == 0.0_wp .AND. &
1228	ug_vertical_gradient(1) == 0.0_wp .AND. &
1229	vg_vertical_gradient_level(1) == 0.0_wp .AND. &
1230	vg_vertical_gradient(1) == 0.0_wp ) THEN
1231	u_gtrans = ug_surface * 0.6_wp
1232	v_gtrans = vg_surface * 0.6_wp
1233	ELSEIF ( use_ug_for_galilei_tr .AND. &
1234	( ug_vertical_gradient_level(1) /= 0.0_wp .OR. &
1235	ug_vertical_gradient(1) /= 0.0_wp ) ) THEN
1236	message_string = 'baroclinity (ug) not allowed simultaneously' // &
1237	' with galilei transformation'
1238	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1239	ELSEIF ( use_ug_for_galilei_tr .AND. &
1240	( vg_vertical_gradient_level(1) /= 0.0_wp .OR. &
1241	vg_vertical_gradient(1) /= 0.0_wp ) ) THEN
1242	message_string = 'baroclinity (vg) not allowed simultaneously' // &
1243	' with galilei transformation'
1244	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1245	ELSE
1246	message_string = 'variable translation speed used for Galilei-' // &
1247	'transformation, which may cause & instabilities in stably ' // &
1248	'stratified regions'
1249	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1250	ENDIF
1251	ENDIF
1252
1253	!
1254	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1255	!-- fluxes have to be used in the diffusion-terms
1256	IF ( constant_flux_layer ) use_surface_fluxes = .TRUE.
1257
1258	!
1259	!-- Check boundary conditions and set internal variables:
1260	!-- Attention: the lateral boundary conditions have been already checked in
1261	!-- parin
1262	!
1263	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1264	!-- Willimas or Wicker - Skamarock advection scheme. Several schemes
1265	!-- and tools do not work with non-cyclic boundary conditions.
1266	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1267	IF ( psolver(1:9) /= 'multigrid' ) THEN
1268	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1269	'psolver = "' // TRIM( psolver ) // '"'
1270	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1271	ENDIF
1272	IF ( momentum_advec /= 'pw-scheme' .AND. &
1273	momentum_advec /= 'ws-scheme' ) THEN
1274
1275	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1276	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1277	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1278	ENDIF
1279	IF ( scalar_advec /= 'pw-scheme' .AND. &
1280	scalar_advec /= 'ws-scheme' ) THEN
1281	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1282	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1283	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1284	ENDIF
1285	IF ( galilei_transformation ) THEN
1286	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1287	'galilei_transformation = .T.'
1288	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1289	ENDIF
1290	ENDIF
1291
1292	!
1293	!-- Bottom boundary condition for the turbulent Kinetic energy
1294	IF ( bc_e_b == 'neumann' ) THEN
1295	ibc_e_b = 1
1296	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1297	ibc_e_b = 2
1298	IF ( .NOT. constant_flux_layer ) THEN
1299	bc_e_b = 'neumann'
1300	ibc_e_b = 1
1301	message_string = 'boundary condition bc_e_b changed to "' // &
1302	TRIM( bc_e_b ) // '"'
1303	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1304	ENDIF
1305	ELSE
1306	message_string = 'unknown boundary condition: bc_e_b = "' // &
1307	TRIM( bc_e_b ) // '"'
1308	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1309	ENDIF
1310
1311	!
1312	!-- Boundary conditions for perturbation pressure
1313	IF ( bc_p_b == 'dirichlet' ) THEN
1314	ibc_p_b = 0
1315	ELSEIF ( bc_p_b == 'neumann' ) THEN
1316	ibc_p_b = 1
1317	ELSE
1318	message_string = 'unknown boundary condition: bc_p_b = "' // &
1319	TRIM( bc_p_b ) // '"'
1320	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1321	ENDIF
1322
1323	IF ( bc_p_t == 'dirichlet' ) THEN
1324	ibc_p_t = 0
1325	!-- TO_DO: later set bc_p_t to neumann before, in case of nested domain
1326	ELSEIF ( bc_p_t == 'neumann' .OR. bc_p_t == 'nested' ) THEN
1327	ibc_p_t = 1
1328	ELSE
1329	message_string = 'unknown boundary condition: bc_p_t = "' // &
1330	TRIM( bc_p_t ) // '"'
1331	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1332	ENDIF
1333
1334	!
1335	!-- Boundary conditions for potential temperature
1336	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1337	ibc_pt_b = 2
1338	ELSE
1339	IF ( bc_pt_b == 'dirichlet' ) THEN
1340	ibc_pt_b = 0
1341	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1342	ibc_pt_b = 1
1343	ELSE
1344	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1345	TRIM( bc_pt_b ) // '"'
1346	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1347	ENDIF
1348	ENDIF
1349
1350	IF ( bc_pt_t == 'dirichlet' ) THEN
1351	ibc_pt_t = 0
1352	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1353	ibc_pt_t = 1
1354	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1355	ibc_pt_t = 2
1356	ELSEIF ( bc_pt_t == 'nested' .OR. bc_pt_t == 'nesting_offline' ) THEN
1357	ibc_pt_t = 3
1358	ELSE
1359	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1360	TRIM( bc_pt_t ) // '"'
1361	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1362	ENDIF
1363
1364	IF ( ANY( wall_heatflux /= 0.0_wp ) .AND. &
1365	surface_heatflux == 9999999.9_wp ) THEN
1366	message_string = 'wall_heatflux additionally requires ' // &
1367	'setting of surface_heatflux'
1368	CALL message( 'check_parameters', 'PA0443', 1, 2, 0, 6, 0 )
1369	ENDIF
1370
1371	!
1372	! This IF clause needs revision, got too complex!!
1373	IF ( surface_heatflux == 9999999.9_wp ) THEN
1374	constant_heatflux = .FALSE.
1375	IF ( large_scale_forcing .OR. land_surface .OR. urban_surface ) THEN
1376	IF ( ibc_pt_b == 0 ) THEN
1377	constant_heatflux = .FALSE.
1378	ELSEIF ( ibc_pt_b == 1 ) THEN
1379	constant_heatflux = .TRUE.
1380	surface_heatflux = 0.0_wp
1381	ENDIF
1382	ENDIF
1383	ELSE
1384	constant_heatflux = .TRUE.
1385	ENDIF
1386
1387	IF ( top_heatflux == 9999999.9_wp ) constant_top_heatflux = .FALSE.
1388
1389	IF ( neutral ) THEN
1390
1391	IF ( surface_heatflux /= 0.0_wp .AND. &
1392	surface_heatflux /= 9999999.9_wp ) THEN
1393	message_string = 'heatflux must not be set for pure neutral flow'
1394	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1395	ENDIF
1396
1397	IF ( top_heatflux /= 0.0_wp .AND. top_heatflux /= 9999999.9_wp ) &
1398	THEN
1399	message_string = 'heatflux must not be set for pure neutral flow'
1400	CALL message( 'check_parameters', 'PA0351', 1, 2, 0, 6, 0 )
1401	ENDIF
1402
1403	ENDIF
1404
1405	IF ( top_momentumflux_u /= 9999999.9_wp .AND. &
1406	top_momentumflux_v /= 9999999.9_wp ) THEN
1407	constant_top_momentumflux = .TRUE.
1408	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9_wp .AND. &
1409	top_momentumflux_v == 9999999.9_wp ) ) THEN
1410	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1411	'must be set'
1412	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1413	ENDIF
1414
1415	!
1416	!-- A given surface temperature implies Dirichlet boundary condition for
1417	!-- temperature. In this case specification of a constant heat flux is
1418	!-- forbidden.
1419	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1420	surface_heatflux /= 0.0_wp ) THEN
1421	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1422	'& is not allowed with constant_heatflux = .TRUE.'
1423	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1424	ENDIF
1425	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0_wp ) THEN
1426	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1427	'wed with pt_surface_initial_change (/=0) = ', &
1428	pt_surface_initial_change
1429	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1430	ENDIF
1431
1432	!
1433	!-- A given temperature at the top implies Dirichlet boundary condition for
1434	!-- temperature. In this case specification of a constant heat flux is
1435	!-- forbidden.
1436	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1437	top_heatflux /= 0.0_wp ) THEN
1438	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1439	'" is not allowed with constant_top_heatflux = .TRUE.'
1440	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1441	ENDIF
1442
1443	!
1444	!-- Set boundary conditions for total water content
1445	IF ( humidity ) THEN
1446
1447	IF ( ANY( wall_humidityflux /= 0.0_wp ) .AND. &
1448	surface_waterflux == 9999999.9_wp ) THEN
1449	message_string = 'wall_humidityflux additionally requires ' // &
1450	'setting of surface_waterflux'
1451	CALL message( 'check_parameters', 'PA0444', 1, 2, 0, 6, 0 )
1452	ENDIF
1453
1454	CALL set_bc_scalars( 'q', bc_q_b, bc_q_t, ibc_q_b, ibc_q_t, &
1455	'PA0071', 'PA0072' )
1456
1457	IF ( surface_waterflux == 9999999.9_wp ) THEN
1458	constant_waterflux = .FALSE.
1459	IF ( large_scale_forcing .OR. land_surface ) THEN
1460	IF ( ibc_q_b == 0 ) THEN
1461	constant_waterflux = .FALSE.
1462	ELSEIF ( ibc_q_b == 1 ) THEN
1463	constant_waterflux = .TRUE.
1464	ENDIF
1465	ENDIF
1466	ELSE
1467	constant_waterflux = .TRUE.
1468	ENDIF
1469
1470	CALL check_bc_scalars( 'q', bc_q_b, ibc_q_b, 'PA0073', 'PA0074', &
1471	constant_waterflux, q_surface_initial_change )
1472
1473	ENDIF
1474
1475	IF ( passive_scalar ) THEN
1476
1477	IF ( ANY( wall_scalarflux /= 0.0_wp ) .AND. &
1478	surface_scalarflux == 9999999.9_wp ) THEN
1479	message_string = 'wall_scalarflux additionally requires ' // &
1480	'setting of surface_scalarflux'
1481	CALL message( 'check_parameters', 'PA0445', 1, 2, 0, 6, 0 )
1482	ENDIF
1483
1484	IF ( surface_scalarflux == 9999999.9_wp ) constant_scalarflux = .FALSE.
1485
1486	CALL set_bc_scalars( 's', bc_s_b, bc_s_t, ibc_s_b, ibc_s_t, &
1487	'PA0071', 'PA0072' )
1488
1489	CALL check_bc_scalars( 's', bc_s_b, ibc_s_b, 'PA0073', 'PA0074', &
1490	constant_scalarflux, s_surface_initial_change )
1491
1492	IF ( top_scalarflux == 9999999.9_wp ) constant_top_scalarflux = .FALSE.
1493	!
1494	!-- A fixed scalar concentration at the top implies Dirichlet boundary
1495	!-- condition for scalar. Hence, in this case specification of a constant
1496	!-- scalar flux is forbidden.
1497	IF ( ( ibc_s_t == 0 .OR. ibc_s_t == 2 ) .AND. constant_top_scalarflux &
1498	.AND. top_scalarflux /= 0.0_wp ) THEN
1499	message_string = 'boundary condition: bc_s_t = "' // &
1500	TRIM( bc_s_t ) // '" is not allowed with ' // &
1501	'top_scalarflux /= 0.0'
1502	CALL message( 'check_parameters', 'PA0441', 1, 2, 0, 6, 0 )
1503	ENDIF
1504	ENDIF
1505
1506	!
1507	!-- Boundary conditions for chemical species
1508	IF ( air_chemistry ) CALL chem_boundary_conds( 'init' )
1509
1510	!
1511	!-- Boundary conditions for horizontal components of wind speed
1512	IF ( bc_uv_b == 'dirichlet' ) THEN
1513	ibc_uv_b = 0
1514	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1515	ibc_uv_b = 1
1516	IF ( constant_flux_layer ) THEN
1517	message_string = 'boundary condition: bc_uv_b = "' // &
1518	TRIM( bc_uv_b ) // '" is not allowed with constant_flux_layer' &
1519	// ' = .TRUE.'
1520	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1521	ENDIF
1522	ELSE
1523	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1524	TRIM( bc_uv_b ) // '"'
1525	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1526	ENDIF
1527	!
1528	!-- In case of coupled simulations u and v at the ground in atmosphere will be
1529	!-- assigned with the u and v values of the ocean surface
1530	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1531	ibc_uv_b = 2
1532	ENDIF
1533
1534	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1535	bc_uv_t = 'neumann'
1536	ibc_uv_t = 1
1537	ELSE
1538	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1539	ibc_uv_t = 0
1540	IF ( bc_uv_t == 'dirichlet_0' ) THEN
1541	!
1542	!-- Velocities for the initial u,v-profiles are set zero at the top
1543	!-- in case of dirichlet_0 conditions
1544	u_init(nzt+1) = 0.0_wp
1545	v_init(nzt+1) = 0.0_wp
1546	ENDIF
1547	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1548	ibc_uv_t = 1
1549	ELSEIF ( bc_uv_t == 'nested' .OR. bc_uv_t == 'nesting_offline' ) THEN
1550	ibc_uv_t = 3
1551	ELSE
1552	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1553	TRIM( bc_uv_t ) // '"'
1554	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1555	ENDIF
1556	ENDIF
1557
1558	!
1559	!-- Compute and check, respectively, the Rayleigh Damping parameter
1560	IF ( rayleigh_damping_factor == -1.0_wp ) THEN
1561	rayleigh_damping_factor = 0.0_wp
1562	ELSE
1563	IF ( rayleigh_damping_factor < 0.0_wp .OR. &
1564	rayleigh_damping_factor > 1.0_wp ) THEN
1565	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1566	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1567	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1568	ENDIF
1569	ENDIF
1570
1571	IF ( rayleigh_damping_height == -1.0_wp ) THEN
1572	IF ( .NOT. ocean_mode ) THEN
1573	rayleigh_damping_height = 0.66666666666_wp * zu(nzt)
1574	ELSE
1575	rayleigh_damping_height = 0.66666666666_wp * zu(nzb)
1576	ENDIF
1577	ELSE
1578	IF ( .NOT. ocean_mode ) THEN
1579	IF ( rayleigh_damping_height < 0.0_wp .OR. &
1580	rayleigh_damping_height > zu(nzt) ) THEN
1581	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1582	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1583	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1584	ENDIF
1585	ELSE
1586	IF ( rayleigh_damping_height > 0.0_wp .OR. &
1587	rayleigh_damping_height < zu(nzb) ) THEN
1588	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1589	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1590	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1591	ENDIF
1592	ENDIF
1593	ENDIF
1594
1595	!
1596	!-- Check number of chosen statistic regions
1597	IF ( statistic_regions < 0 ) THEN
1598	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1599	statistic_regions+1, ' is not allowed'
1600	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1601	ENDIF
1602	IF ( normalizing_region > statistic_regions .OR. &
1603	normalizing_region < 0) THEN
1604	WRITE ( message_string, * ) 'normalizing_region = ', &
1605	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1606	' (value of statistic_regions)'
1607	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1608	ENDIF
1609
1610	!
1611	!-- Set the default intervals for data output, if necessary
1612	!-- NOTE: dt_dosp has already been set in spectra_parin
1613	IF ( dt_data_output /= 9999999.9_wp ) THEN
1614	IF ( dt_dopr == 9999999.9_wp ) dt_dopr = dt_data_output
1615	IF ( dt_dopts == 9999999.9_wp ) dt_dopts = dt_data_output
1616	IF ( dt_do2d_xy == 9999999.9_wp ) dt_do2d_xy = dt_data_output
1617	IF ( dt_do2d_xz == 9999999.9_wp ) dt_do2d_xz = dt_data_output
1618	IF ( dt_do2d_yz == 9999999.9_wp ) dt_do2d_yz = dt_data_output
1619	IF ( dt_do3d == 9999999.9_wp ) dt_do3d = dt_data_output
1620	IF ( dt_data_output_av == 9999999.9_wp ) dt_data_output_av = dt_data_output
1621	DO mid = 1, max_masks
1622	IF ( dt_domask(mid) == 9999999.9_wp ) dt_domask(mid) = dt_data_output
1623	ENDDO
1624	ENDIF
1625
1626	!
1627	!-- Set the default skip time intervals for data output, if necessary
1628	IF ( skip_time_dopr == 9999999.9_wp ) &
1629	skip_time_dopr = skip_time_data_output
1630	IF ( skip_time_do2d_xy == 9999999.9_wp ) &
1631	skip_time_do2d_xy = skip_time_data_output
1632	IF ( skip_time_do2d_xz == 9999999.9_wp ) &
1633	skip_time_do2d_xz = skip_time_data_output
1634	IF ( skip_time_do2d_yz == 9999999.9_wp ) &
1635	skip_time_do2d_yz = skip_time_data_output
1636	IF ( skip_time_do3d == 9999999.9_wp ) &
1637	skip_time_do3d = skip_time_data_output
1638	IF ( skip_time_data_output_av == 9999999.9_wp ) &
1639	skip_time_data_output_av = skip_time_data_output
1640	DO mid = 1, max_masks
1641	IF ( skip_time_domask(mid) == 9999999.9_wp ) &
1642	skip_time_domask(mid) = skip_time_data_output
1643	ENDDO
1644
1645	!
1646	!-- Check the average intervals (first for 3d-data, then for profiles)
1647	IF ( averaging_interval > dt_data_output_av ) THEN
1648	WRITE( message_string, * ) 'averaging_interval = ', &
1649	averaging_interval, ' must be <= dt_data_output_av = ', &
1650	dt_data_output_av
1651	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1652	ENDIF
1653
1654	IF ( averaging_interval_pr == 9999999.9_wp ) THEN
1655	averaging_interval_pr = averaging_interval
1656	ENDIF
1657
1658	IF ( averaging_interval_pr > dt_dopr ) THEN
1659	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1660	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1661	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1662	ENDIF
1663
1664	!
1665	!-- Set the default interval for profiles entering the temporal average
1666	IF ( dt_averaging_input_pr == 9999999.9_wp ) THEN
1667	dt_averaging_input_pr = dt_averaging_input
1668	ENDIF
1669
1670	!
1671	!-- Set the default interval for the output of timeseries to a reasonable
1672	!-- value (tries to minimize the number of calls of flow_statistics)
1673	IF ( dt_dots == 9999999.9_wp ) THEN
1674	IF ( averaging_interval_pr == 0.0_wp ) THEN
1675	dt_dots = MIN( dt_run_control, dt_dopr )
1676	ELSE
1677	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1678	ENDIF
1679	ENDIF
1680
1681	!
1682	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1683	IF ( dt_averaging_input > averaging_interval ) THEN
1684	WRITE( message_string, * ) 'dt_averaging_input = ', &
1685	dt_averaging_input, ' must be <= averaging_interval = ', &
1686	averaging_interval
1687	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1688	ENDIF
1689
1690	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1691	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1692	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1693	averaging_interval_pr
1694	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1695	ENDIF
1696
1697	!
1698	!-- Determine the number of output profiles and check whether they are
1699	!-- permissible
1700	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1701
1702	dopr_n = dopr_n + 1
1703	i = dopr_n
1704
1705	!
1706	!-- Determine internal profile number (for hom, homs)
1707	!-- and store height levels
1708	SELECT CASE ( TRIM( data_output_pr(i) ) )
1709
1710	CASE ( 'u', '#u' )
1711	dopr_index(i) = 1
1712	dopr_unit(i) = 'm/s'
1713	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1714	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1715	dopr_initial_index(i) = 5
1716	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1717	data_output_pr(i) = data_output_pr(i)(2:)
1718	ENDIF
1719
1720	CASE ( 'v', '#v' )
1721	dopr_index(i) = 2
1722	dopr_unit(i) = 'm/s'
1723	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1724	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1725	dopr_initial_index(i) = 6
1726	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1727	data_output_pr(i) = data_output_pr(i)(2:)
1728	ENDIF
1729
1730	CASE ( 'w' )
1731	dopr_index(i) = 3
1732	dopr_unit(i) = 'm/s'
1733	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1734
1735	CASE ( 'theta', '#theta' )
1736	IF ( .NOT. bulk_cloud_model ) THEN
1737	dopr_index(i) = 4
1738	dopr_unit(i) = 'K'
1739	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1740	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1741	dopr_initial_index(i) = 7
1742	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1743	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
1744	data_output_pr(i) = data_output_pr(i)(2:)
1745	ENDIF
1746	ELSE
1747	dopr_index(i) = 43
1748	dopr_unit(i) = 'K'
1749	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1750	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1751	dopr_initial_index(i) = 28
1752	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1753	hom(nzb,2,28,:) = 0.0_wp ! because zu(nzb) is negative
1754	data_output_pr(i) = data_output_pr(i)(2:)
1755	ENDIF
1756	ENDIF
1757
1758	CASE ( 'e', '#e' )
1759	dopr_index(i) = 8
1760	dopr_unit(i) = 'm2/s2'
1761	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1762	hom(nzb,2,8,:) = 0.0_wp
1763	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1764	dopr_initial_index(i) = 8
1765	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1766	data_output_pr(i) = data_output_pr(i)(2:)
1767	ENDIF
1768
1769	CASE ( 'km', '#km' )
1770	dopr_index(i) = 9
1771	dopr_unit(i) = 'm2/s'
1772	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1773	hom(nzb,2,9,:) = 0.0_wp
1774	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1775	dopr_initial_index(i) = 23
1776	hom(:,2,23,:) = hom(:,2,9,:)
1777	data_output_pr(i) = data_output_pr(i)(2:)
1778	ENDIF
1779
1780	CASE ( 'kh', '#kh' )
1781	dopr_index(i) = 10
1782	dopr_unit(i) = 'm2/s'
1783	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1784	hom(nzb,2,10,:) = 0.0_wp
1785	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1786	dopr_initial_index(i) = 24
1787	hom(:,2,24,:) = hom(:,2,10,:)
1788	data_output_pr(i) = data_output_pr(i)(2:)
1789	ENDIF
1790
1791	CASE ( 'l', '#l' )
1792	dopr_index(i) = 11
1793	dopr_unit(i) = 'm'
1794	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1795	hom(nzb,2,11,:) = 0.0_wp
1796	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1797	dopr_initial_index(i) = 25
1798	hom(:,2,25,:) = hom(:,2,11,:)
1799	data_output_pr(i) = data_output_pr(i)(2:)
1800	ENDIF
1801
1802	CASE ( 'w"u"' )
1803	dopr_index(i) = 12
1804	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1805	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1806	IF ( constant_flux_layer ) hom(nzb,2,12,:) = zu(1)
1807
1808	CASE ( 'wu' )
1809	dopr_index(i) = 13
1810	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1811	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1812
1813	CASE ( 'w"v"' )
1814	dopr_index(i) = 14
1815	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1816	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1817	IF ( constant_flux_layer ) hom(nzb,2,14,:) = zu(1)
1818
1819	CASE ( 'wv' )
1820	dopr_index(i) = 15
1821	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1822	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1823
1824	CASE ( 'w"theta"' )
1825	dopr_index(i) = 16
1826	dopr_unit(i) = TRIM ( heatflux_output_unit )
1827	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1828
1829	CASE ( 'wtheta' )
1830	dopr_index(i) = 17
1831	dopr_unit(i) = TRIM ( heatflux_output_unit )
1832	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1833
1834	CASE ( 'wtheta' )
1835	dopr_index(i) = 18
1836	dopr_unit(i) = TRIM ( heatflux_output_unit )
1837	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1838
1839	CASE ( 'wu' )
1840	dopr_index(i) = 19
1841	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1842	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1843	IF ( constant_flux_layer ) hom(nzb,2,19,:) = zu(1)
1844
1845	CASE ( 'wv' )
1846	dopr_index(i) = 20
1847	dopr_unit(i) = TRIM ( momentumflux_output_unit )
1848	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1849	IF ( constant_flux_layer ) hom(nzb,2,20,:) = zu(1)
1850
1851	CASE ( 'wthetaBC' )
1852	dopr_index(i) = 21
1853	dopr_unit(i) = TRIM ( heatflux_output_unit )
1854	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1855
1856	CASE ( 'wthetaBC' )
1857	dopr_index(i) = 22
1858	dopr_unit(i) = TRIM ( heatflux_output_unit )
1859	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1860
1861	CASE ( 'u*2' )
1862	dopr_index(i) = 30
1863	dopr_unit(i) = 'm2/s2'
1864	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1865
1866	CASE ( 'v*2' )
1867	dopr_index(i) = 31
1868	dopr_unit(i) = 'm2/s2'
1869	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1870
1871	CASE ( 'w*2' )
1872	dopr_index(i) = 32
1873	dopr_unit(i) = 'm2/s2'
1874	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1875
1876	CASE ( 'theta*2' )
1877	dopr_index(i) = 33
1878	dopr_unit(i) = 'K2'
1879	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1880
1881	CASE ( 'e*' )
1882	dopr_index(i) = 34
1883	dopr_unit(i) = 'm2/s2'
1884	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1885
1886	CASE ( 'w2theta' )
1887	dopr_index(i) = 35
1888	dopr_unit(i) = 'K m2/s2'
1889	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1890
1891	CASE ( 'wtheta2' )
1892	dopr_index(i) = 36
1893	dopr_unit(i) = 'K2 m/s'
1894	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1895
1896	CASE ( 'we' )
1897	dopr_index(i) = 37
1898	dopr_unit(i) = 'm3/s3'
1899	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1900
1901	CASE ( 'w*3' )
1902	dopr_index(i) = 38
1903	dopr_unit(i) = 'm3/s3'
1904	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1905
1906	CASE ( 'Sw' )
1907	dopr_index(i) = 39
1908	dopr_unit(i) = 'none'
1909	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1910
1911	CASE ( 'p' )
1912	dopr_index(i) = 40
1913	dopr_unit(i) = 'Pa'
1914	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1915
1916	CASE ( 'q', '#q' )
1917	IF ( .NOT. humidity ) THEN
1918	message_string = 'data_output_pr = ' // &
1919	TRIM( data_output_pr(i) ) // ' is not imp' // &
1920	'lemented for humidity = .FALSE.'
1921	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1922	ELSE
1923	dopr_index(i) = 41
1924	dopr_unit(i) = 'kg/kg'
1925	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1926	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1927	dopr_initial_index(i) = 26
1928	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1929	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
1930	data_output_pr(i) = data_output_pr(i)(2:)
1931	ENDIF
1932	ENDIF
1933
1934	CASE ( 's', '#s' )
1935	IF ( .NOT. passive_scalar ) THEN
1936	message_string = 'data_output_pr = ' // &
1937	TRIM( data_output_pr(i) ) // ' is not imp' // &
1938	'lemented for passive_scalar = .FALSE.'
1939	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1940	ELSE
1941	dopr_index(i) = 115
1942	dopr_unit(i) = 'kg/m3'
1943	hom(:,2,115,:) = SPREAD( zu, 2, statistic_regions+1 )
1944	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1945	dopr_initial_index(i) = 121
1946	hom(:,2,121,:) = SPREAD( zu, 2, statistic_regions+1 )
1947	hom(nzb,2,121,:) = 0.0_wp ! because zu(nzb) is negative
1948	data_output_pr(i) = data_output_pr(i)(2:)
1949	ENDIF
1950	ENDIF
1951
1952	CASE ( 'qv', '#qv' )
1953	IF ( .NOT. bulk_cloud_model ) THEN
1954	dopr_index(i) = 41
1955	dopr_unit(i) = 'kg/kg'
1956	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1957	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1958	dopr_initial_index(i) = 26
1959	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1960	hom(nzb,2,26,:) = 0.0_wp ! because zu(nzb) is negative
1961	data_output_pr(i) = data_output_pr(i)(2:)
1962	ENDIF
1963	ELSE
1964	dopr_index(i) = 42
1965	dopr_unit(i) = 'kg/kg'
1966	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1967	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1968	dopr_initial_index(i) = 27
1969	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1970	hom(nzb,2,27,:) = 0.0_wp ! because zu(nzb) is negative
1971	data_output_pr(i) = data_output_pr(i)(2:)
1972	ENDIF
1973	ENDIF
1974
1975	CASE ( 'thetal', '#thetal' )
1976	IF ( .NOT. bulk_cloud_model ) THEN
1977	message_string = 'data_output_pr = ' // &
1978	TRIM( data_output_pr(i) ) // ' is not imp' // &
1979	'lemented for bulk_cloud_model = .FALSE.'
1980	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1981	ELSE
1982	dopr_index(i) = 4
1983	dopr_unit(i) = 'K'
1984	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1985	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1986	dopr_initial_index(i) = 7
1987	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1988	hom(nzb,2,7,:) = 0.0_wp ! because zu(nzb) is negative
1989	data_output_pr(i) = data_output_pr(i)(2:)
1990	ENDIF
1991	ENDIF
1992
1993	CASE ( 'thetav', '#thetav' )
1994	dopr_index(i) = 44
1995	dopr_unit(i) = 'K'
1996	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1997	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1998	dopr_initial_index(i) = 29
1999	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
2000	hom(nzb,2,29,:) = 0.0_wp ! because zu(nzb) is negative
2001	data_output_pr(i) = data_output_pr(i)(2:)
2002	ENDIF
2003
2004	CASE ( 'w"thetav"' )
2005	dopr_index(i) = 45
2006	dopr_unit(i) = TRIM ( heatflux_output_unit )
2007	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
2008
2009	CASE ( 'wthetav' )
2010	dopr_index(i) = 46
2011	dopr_unit(i) = TRIM ( heatflux_output_unit )
2012	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
2013
2014	CASE ( 'wthetav' )
2015	dopr_index(i) = 47
2016	dopr_unit(i) = TRIM ( heatflux_output_unit )
2017	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
2018
2019	CASE ( 'w"q"' )
2020	IF ( .NOT. humidity ) THEN
2021	message_string = 'data_output_pr = ' // &
2022	TRIM( data_output_pr(i) ) // ' is not imp' // &
2023	'lemented for humidity = .FALSE.'
2024	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2025	ELSE
2026	dopr_index(i) = 48
2027	dopr_unit(i) = TRIM ( waterflux_output_unit )
2028	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2029	ENDIF
2030
2031	CASE ( 'wq' )
2032	IF ( .NOT. humidity ) THEN
2033	message_string = 'data_output_pr = ' // &
2034	TRIM( data_output_pr(i) ) // ' is not imp' // &
2035	'lemented for humidity = .FALSE.'
2036	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2037	ELSE
2038	dopr_index(i) = 49
2039	dopr_unit(i) = TRIM ( waterflux_output_unit )
2040	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2041	ENDIF
2042
2043	CASE ( 'wq' )
2044	IF ( .NOT. humidity ) THEN
2045	message_string = 'data_output_pr = ' // &
2046	TRIM( data_output_pr(i) ) // ' is not imp' // &
2047	'lemented for humidity = .FALSE.'
2048	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2049	ELSE
2050	dopr_index(i) = 50
2051	dopr_unit(i) = TRIM ( waterflux_output_unit )
2052	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2053	ENDIF
2054
2055	CASE ( 'w"s"' )
2056	IF ( .NOT. passive_scalar ) THEN
2057	message_string = 'data_output_pr = ' // &
2058	TRIM( data_output_pr(i) ) // ' is not imp' // &
2059	'lemented for passive_scalar = .FALSE.'
2060	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2061	ELSE
2062	dopr_index(i) = 117
2063	dopr_unit(i) = 'kg/m3 m/s'
2064	hom(:,2,117,:) = SPREAD( zw, 2, statistic_regions+1 )
2065	ENDIF
2066
2067	CASE ( 'ws' )
2068	IF ( .NOT. passive_scalar ) THEN
2069	message_string = 'data_output_pr = ' // &
2070	TRIM( data_output_pr(i) ) // ' is not imp' // &
2071	'lemented for passive_scalar = .FALSE.'
2072	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2073	ELSE
2074	dopr_index(i) = 114
2075	dopr_unit(i) = 'kg/m3 m/s'
2076	hom(:,2,114,:) = SPREAD( zw, 2, statistic_regions+1 )
2077	ENDIF
2078
2079	CASE ( 'ws' )
2080	IF ( .NOT. passive_scalar ) THEN
2081	message_string = 'data_output_pr = ' // &
2082	TRIM( data_output_pr(i) ) // ' is not imp' // &
2083	'lemented for passive_scalar = .FALSE.'
2084	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
2085	ELSE
2086	dopr_index(i) = 118
2087	dopr_unit(i) = 'kg/m3 m/s'
2088	hom(:,2,118,:) = SPREAD( zw, 2, statistic_regions+1 )
2089	ENDIF
2090
2091	CASE ( 'w"qv"' )
2092	IF ( humidity .AND. .NOT. bulk_cloud_model ) THEN
2093	dopr_index(i) = 48
2094	dopr_unit(i) = TRIM ( waterflux_output_unit )
2095	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
2096	ELSEIF ( humidity .AND. bulk_cloud_model ) THEN
2097	dopr_index(i) = 51
2098	dopr_unit(i) = TRIM ( waterflux_output_unit )
2099	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
2100	ELSE
2101	message_string = 'data_output_pr = ' // &
2102	TRIM( data_output_pr(i) ) // ' is not imp' // &
2103	'lemented for bulk_cloud_model = .FALSE. ' // &
2104	'and humidity = .FALSE.'
2105	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2106	ENDIF
2107
2108	CASE ( 'wqv' )
2109	IF ( humidity .AND. .NOT. bulk_cloud_model ) THEN
2110	dopr_index(i) = 49
2111	dopr_unit(i) = TRIM ( waterflux_output_unit )
2112	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
2113	ELSEIF( humidity .AND. bulk_cloud_model ) THEN
2114	dopr_index(i) = 52
2115	dopr_unit(i) = TRIM ( waterflux_output_unit )
2116	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
2117	ELSE
2118	message_string = 'data_output_pr = ' // &
2119	TRIM( data_output_pr(i) ) // ' is not imp' // &
2120	'lemented for bulk_cloud_model = .FALSE. ' // &
2121	'and humidity = .FALSE.'
2122	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2123	ENDIF
2124
2125	CASE ( 'wqv' )
2126	IF ( humidity .AND. .NOT. bulk_cloud_model ) THEN
2127	dopr_index(i) = 50
2128	dopr_unit(i) = TRIM ( waterflux_output_unit )
2129	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2130	ELSEIF ( humidity .AND. bulk_cloud_model ) THEN
2131	dopr_index(i) = 53
2132	dopr_unit(i) = TRIM ( waterflux_output_unit )
2133	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2134	ELSE
2135	message_string = 'data_output_pr = ' // &
2136	TRIM( data_output_pr(i) ) // ' is not imp' // &
2137	'lemented for bulk_cloud_model = .FALSE. ' // &
2138	'and humidity = .FALSE.'
2139	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2140	ENDIF
2141
2142	CASE ( 'ql' )
2143	IF ( .NOT. bulk_cloud_model .AND. .NOT. cloud_droplets ) THEN
2144	message_string = 'data_output_pr = ' // &
2145	TRIM( data_output_pr(i) ) // ' is not imp' // &
2146	'lemented for bulk_cloud_model = .FALSE. ' // &
2147	'and cloud_droplets = .FALSE.'
2148	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2149	ELSE
2150	dopr_index(i) = 54
2151	dopr_unit(i) = 'kg/kg'
2152	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2153	ENDIF
2154
2155	CASE ( 'wuu*:dz' )
2156	dopr_index(i) = 55
2157	dopr_unit(i) = 'm2/s3'
2158	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2159
2160	CASE ( 'wp:dz' )
2161	dopr_index(i) = 56
2162	dopr_unit(i) = 'm2/s3'
2163	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2164
2165	CASE ( 'w"e:dz' )
2166	dopr_index(i) = 57
2167	dopr_unit(i) = 'm2/s3'
2168	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2169
2170	CASE ( 'u"theta"' )
2171	dopr_index(i) = 58
2172	dopr_unit(i) = TRIM ( heatflux_output_unit )
2173	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2174
2175	CASE ( 'utheta' )
2176	dopr_index(i) = 59
2177	dopr_unit(i) = TRIM ( heatflux_output_unit )
2178	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2179
2180	CASE ( 'utheta_t' )
2181	dopr_index(i) = 60
2182	dopr_unit(i) = TRIM ( heatflux_output_unit )
2183	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2184
2185	CASE ( 'v"theta"' )
2186	dopr_index(i) = 61
2187	dopr_unit(i) = TRIM ( heatflux_output_unit )
2188	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2189
2190	CASE ( 'vtheta' )
2191	dopr_index(i) = 62
2192	dopr_unit(i) = TRIM ( heatflux_output_unit )
2193	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2194
2195	CASE ( 'vtheta_t' )
2196	dopr_index(i) = 63
2197	dopr_unit(i) = TRIM ( heatflux_output_unit )
2198	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2199
2200	CASE ( 'wp' )
2201	dopr_index(i) = 68
2202	dopr_unit(i) = 'm3/s3'
2203	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2204
2205	CASE ( 'w"e' )
2206	dopr_index(i) = 69
2207	dopr_unit(i) = 'm3/s3'
2208	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2209
2210	CASE ( 'q*2' )
2211	IF ( .NOT. humidity ) THEN
2212	message_string = 'data_output_pr = ' // &
2213	TRIM( data_output_pr(i) ) // ' is not imp' // &
2214	'lemented for humidity = .FALSE.'
2215	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2216	ELSE
2217	dopr_index(i) = 70
2218	dopr_unit(i) = 'kg2/kg2'
2219	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2220	ENDIF
2221
2222	CASE ( 'hyp' )
2223	dopr_index(i) = 72
2224	dopr_unit(i) = 'hPa'
2225	hom(:,2,72,:) = SPREAD( zu, 2, statistic_regions+1 )
2226
2227	CASE ( 'rho' )
2228	dopr_index(i) = 119
2229	dopr_unit(i) = 'kg/m3'
2230	hom(:,2,119,:) = SPREAD( zu, 2, statistic_regions+1 )
2231
2232	CASE ( 'rho_zw' )
2233	dopr_index(i) = 120
2234	dopr_unit(i) = 'kg/m3'
2235	hom(:,2,120,:) = SPREAD( zw, 2, statistic_regions+1 )
2236
2237	CASE ( 'ug' )
2238	dopr_index(i) = 78
2239	dopr_unit(i) = 'm/s'
2240	hom(:,2,78,:) = SPREAD( zu, 2, statistic_regions+1 )
2241
2242	CASE ( 'vg' )
2243	dopr_index(i) = 79
2244	dopr_unit(i) = 'm/s'
2245	hom(:,2,79,:) = SPREAD( zu, 2, statistic_regions+1 )
2246
2247	CASE ( 'w_subs' )
2248	IF ( .NOT. large_scale_subsidence ) THEN
2249	message_string = 'data_output_pr = ' // &
2250	TRIM( data_output_pr(i) ) // ' is not imp' // &
2251	'lemented for large_scale_subsidence = .FALSE.'
2252	CALL message( 'check_parameters', 'PA0382', 1, 2, 0, 6, 0 )
2253	ELSE
2254	dopr_index(i) = 80
2255	dopr_unit(i) = 'm/s'
2256	hom(:,2,80,:) = SPREAD( zu, 2, statistic_regions+1 )
2257	ENDIF
2258
2259	CASE ( 's*2' )
2260	IF ( .NOT. passive_scalar ) THEN
2261	message_string = 'data_output_pr = ' // &
2262	TRIM( data_output_pr(i) ) // ' is not imp' // &
2263	'lemented for passive_scalar = .FALSE.'
2264	CALL message( 'check_parameters', 'PA0185', 1, 2, 0, 6, 0 )
2265	ELSE
2266	dopr_index(i) = 116
2267	dopr_unit(i) = 'kg2/m6'
2268	hom(:,2,116,:) = SPREAD( zu, 2, statistic_regions+1 )
2269	ENDIF
2270
2271	CASE DEFAULT
2272	unit = 'illegal'
2273	!
2274	!-- Check for other modules
2275	CALL module_interface_check_data_output_pr( data_output_pr(i), i, &
2276	unit, dopr_unit(i) )
2277
2278	!
2279	!-- No valid quantity found
2280	IF ( unit == 'illegal' ) THEN
2281	IF ( data_output_pr_user(1) /= ' ' ) THEN
2282	message_string = 'illegal value for data_output_pr or ' // &
2283	'data_output_pr_user = "' // &
2284	TRIM( data_output_pr(i) ) // '"'
2285	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2286	ELSE
2287	message_string = 'illegal value for data_output_pr = "' // &
2288	TRIM( data_output_pr(i) ) // '"'
2289	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2290	ENDIF
2291	ENDIF
2292
2293	END SELECT
2294
2295	ENDDO
2296
2297
2298	!
2299	!-- Append user-defined data output variables to the standard data output
2300	IF ( data_output_user(1) /= ' ' ) THEN
2301	i = 1
2302	DO WHILE ( data_output(i) /= ' ' .AND. i <= 500 )
2303	i = i + 1
2304	ENDDO
2305	j = 1
2306	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 500 )
2307	IF ( i > 500 ) THEN
2308	message_string = 'number of output quantitities given by data' // &
2309	'_output and data_output_user exceeds the limit of 500'
2310	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2311	ENDIF
2312	data_output(i) = data_output_user(j)
2313	i = i + 1
2314	j = j + 1
2315	ENDDO
2316	ENDIF
2317
2318	!
2319	!-- Check and set steering parameters for 2d/3d data output and averaging
2320	i = 1
2321	DO WHILE ( data_output(i) /= ' ' .AND. i <= 500 )
2322	!
2323	!-- Check for data averaging
2324	ilen = LEN_TRIM( data_output(i) )
2325	j = 0 ! no data averaging
2326	IF ( ilen > 3 ) THEN
2327	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2328	j = 1 ! data averaging
2329	data_output(i) = data_output(i)(1:ilen-3)
2330	ENDIF
2331	ENDIF
2332	!
2333	!-- Check for cross section or volume data
2334	ilen = LEN_TRIM( data_output(i) )
2335	k = 0 ! 3d data
2336	var = data_output(i)(1:ilen)
2337	IF ( ilen > 3 ) THEN
2338	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2339	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2340	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2341	k = 1 ! 2d data
2342	var = data_output(i)(1:ilen-3)
2343	ENDIF
2344	ENDIF
2345
2346	!
2347	!-- Check for allowed value and set units
2348	SELECT CASE ( TRIM( var ) )
2349
2350	CASE ( 'e' )
2351	IF ( constant_diffusion ) THEN
2352	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2353	'res constant_diffusion = .FALSE.'
2354	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2355	ENDIF
2356	unit = 'm2/s2'
2357
2358	CASE ( 'thetal' )
2359	IF ( .NOT. bulk_cloud_model ) THEN
2360	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2361	'res bulk_cloud_model = .TRUE.'
2362	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2363	ENDIF
2364	unit = 'K'
2365
2366	CASE ( 'pc', 'pr' )
2367	IF ( .NOT. particle_advection ) THEN
2368	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2369	'es a "particle_parameters"-NAMELIST in the parameter ' // &
2370	'file (PARIN)'
2371	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2372	ENDIF
2373	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2374	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2375
2376	CASE ( 'q', 'thetav' )
2377	IF ( .NOT. humidity ) THEN
2378	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2379	'res humidity = .TRUE.'
2380	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2381	ENDIF
2382	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2383	IF ( TRIM( var ) == 'thetav' ) unit = 'K'
2384
2385	CASE ( 'ql' )
2386	IF ( .NOT. ( bulk_cloud_model .OR. cloud_droplets ) ) THEN
2387	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2388	'res bulk_cloud_model = .TRUE. or cloud_droplets = .TRUE.'
2389	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2390	ENDIF
2391	unit = 'kg/kg'
2392
2393	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2394	IF ( .NOT. cloud_droplets ) THEN
2395	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2396	'res cloud_droplets = .TRUE.'
2397	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2398	ENDIF
2399	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2400	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2401	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2402
2403	CASE ( 'qv' )
2404	IF ( .NOT. bulk_cloud_model ) THEN
2405	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2406	'res bulk_cloud_model = .TRUE.'
2407	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2408	ENDIF
2409	unit = 'kg/kg'
2410
2411	CASE ( 's' )
2412	IF ( .NOT. passive_scalar ) THEN
2413	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2414	'res passive_scalar = .TRUE.'
2415	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2416	ENDIF
2417	unit = 'kg/m3'
2418
2419	CASE ( 'p', 'theta', 'u', 'v', 'w' )
2420	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2421	IF ( TRIM( var ) == 'theta' ) unit = 'K'
2422	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2423	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2424	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2425	CONTINUE
2426
2427	CASE ( 'ghf', 'lwp', 'ol', 'qsws', 'r_a*', &
2428	'shf', 'ssws', 't', 'tsurf', 'us*', &
2429	'z0', 'z0h', 'z0q*' )
2430	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2431	message_string = 'illegal value for data_output: "' // &
2432	TRIM( var ) // '" & only 2d-horizontal ' // &
2433	'cross sections are allowed for this value'
2434	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2435	ENDIF
2436
2437	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. bulk_cloud_model ) THEN
2438	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2439	'res bulk_cloud_model = .TRUE.'
2440	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2441	ENDIF
2442	IF ( TRIM( var ) == 'qsws*' .AND. .NOT. humidity ) THEN
2443	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2444	'res humidity = .TRUE.'
2445	CALL message( 'check_parameters', 'PA0322', 1, 2, 0, 6, 0 )
2446	ENDIF
2447
2448	IF ( TRIM( var ) == 'ghf*' .AND. .NOT. land_surface ) THEN
2449	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2450	'res land_surface = .TRUE.'
2451	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
2452	ENDIF
2453
2454	IF ( ( TRIM( var ) == 'r_a' .OR. TRIM( var ) == 'ghf' ) &
2455	.AND. .NOT. land_surface .AND. .NOT. urban_surface ) &
2456	THEN
2457	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2458	'res land_surface = .TRUE. or ' // &
2459	'urban_surface = .TRUE.'
2460	CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 )
2461	ENDIF
2462
2463	IF ( TRIM( var ) == 'ssws*' .AND. .NOT. passive_scalar ) THEN
2464	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2465	'res passive_scalar = .TRUE.'
2466	CALL message( 'check_parameters', 'PA0361', 1, 2, 0, 6, 0 )
2467	ENDIF
2468
2469	IF ( TRIM( var ) == 'ghf*' ) unit = 'W/m2'
2470	IF ( TRIM( var ) == 'lwp*' ) unit = 'kg/m2'
2471	IF ( TRIM( var ) == 'ol*' ) unit = 'm'
2472	IF ( TRIM( var ) == 'qsws*' ) unit = 'kgm/kgs'
2473	IF ( TRIM( var ) == 'r_a*' ) unit = 's/m'
2474	IF ( TRIM( var ) == 'shf' ) unit = 'Km/s'
2475	IF ( TRIM( var ) == 'ssws' ) unit = 'kg/m2s'
2476	IF ( TRIM( var ) == 't*' ) unit = 'K'
2477	IF ( TRIM( var ) == 'tsurf*' ) unit = 'K'
2478	IF ( TRIM( var ) == 'us*' ) unit = 'm/s'
2479	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2480	IF ( TRIM( var ) == 'z0h*' ) unit = 'm'
2481	!
2482	!-- Output of surface latent and sensible heat flux will be in W/m2
2483	!-- in case of natural- and urban-type surfaces, even if
2484	!-- flux_output_mode is set to kinematic units.
2485	IF ( land_surface .OR. urban_surface ) THEN
2486	IF ( TRIM( var ) == 'shf*' ) unit = 'W/m2'
2487	IF ( TRIM( var ) == 'qsws*' ) unit = 'W/m2'
2488	ENDIF
2489
2490	CASE DEFAULT
2491	!
2492	!-- Check for other modules
2493	CALL module_interface_check_data_output( var, unit, i, j, ilen, k )
2494
2495	IF ( unit == 'illegal' ) THEN
2496	IF ( data_output_user(1) /= ' ' ) THEN
2497	message_string = 'illegal value for data_output or ' // &
2498	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2499	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2500	ELSE
2501	message_string = 'illegal value for data_output = "' // &
2502	TRIM( data_output(i) ) // '"'
2503	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2504	ENDIF
2505	ENDIF
2506
2507	END SELECT
2508	!
2509	!-- Set the internal steering parameters appropriately
2510	IF ( k == 0 ) THEN
2511	do3d_no(j) = do3d_no(j) + 1
2512	do3d(j,do3d_no(j)) = data_output(i)
2513	do3d_unit(j,do3d_no(j)) = unit
2514	ELSE
2515	do2d_no(j) = do2d_no(j) + 1
2516	do2d(j,do2d_no(j)) = data_output(i)
2517	do2d_unit(j,do2d_no(j)) = unit
2518	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2519	data_output_xy(j) = .TRUE.
2520	ENDIF
2521	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2522	data_output_xz(j) = .TRUE.
2523	ENDIF
2524	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2525	data_output_yz(j) = .TRUE.
2526	ENDIF
2527	ENDIF
2528
2529	IF ( j == 1 ) THEN
2530	!
2531	!-- Check, if variable is already subject to averaging
2532	found = .FALSE.
2533	DO k = 1, doav_n
2534	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2535	ENDDO
2536
2537	IF ( .NOT. found ) THEN
2538	doav_n = doav_n + 1
2539	doav(doav_n) = var
2540	ENDIF
2541	ENDIF
2542
2543	i = i + 1
2544	ENDDO
2545
2546	!
2547	!-- Averaged 2d or 3d output requires that an averaging interval has been set
2548	IF ( doav_n > 0 .AND. averaging_interval == 0.0_wp ) THEN
2549	WRITE( message_string, * ) 'output of averaged quantity "', &
2550	TRIM( doav(1) ), '_av" requires to set a ', &
2551	'non-zero averaging interval'
2552	CALL message( 'check_parameters', 'PA0323', 1, 2, 0, 6, 0 )
2553	ENDIF
2554
2555	!
2556	!-- Check sectional planes and store them in one shared array
2557	IF ( ANY( section_xy > nz + 1 ) ) THEN
2558	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2559	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2560	ENDIF
2561	IF ( ANY( section_xz > ny + 1 ) ) THEN
2562	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2563	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2564	ENDIF
2565	IF ( ANY( section_yz > nx + 1 ) ) THEN
2566	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2567	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2568	ENDIF
2569	section(:,1) = section_xy
2570	section(:,2) = section_xz
2571	section(:,3) = section_yz
2572
2573	IF ( ANY( data_output_xy ) .AND. .NOT. ANY( section(:,1) /= -9999 ) ) THEN
2574	WRITE( message_string, * ) 'section_xy not defined for requested ' // &
2575	'xy-cross section output.&At least one ' // &
2576	'cross section must be given.'
2577	CALL message( 'check_parameters', 'PA0681', 1, 2, 0, 6, 0 )
2578	ENDIF
2579	IF ( ANY( data_output_xz ) .AND. .NOT. ANY( section(:,2) /= -9999 ) ) THEN
2580	WRITE( message_string, * ) 'section_xz not defined for requested ' // &
2581	'xz-cross section output.&At least one ' // &
2582	'cross section must be given.'
2583	CALL message( 'check_parameters', 'PA0681', 1, 2, 0, 6, 0 )
2584	ENDIF
2585	IF ( ANY( data_output_yz ) .AND. .NOT. ANY( section(:,3) /= -9999 ) ) THEN
2586	WRITE( message_string, * ) 'section_yz not defined for requested ' // &
2587	'yz-cross section output.&At least one ' // &
2588	'cross section must be given.'
2589	CALL message( 'check_parameters', 'PA0681', 1, 2, 0, 6, 0 )
2590	ENDIF
2591	!
2592	!-- Upper plot limit for 3D arrays
2593	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2594
2595	!
2596	!-- Set output format string (used in header)
2597	SELECT CASE ( netcdf_data_format )
2598	CASE ( 1 )
2599	netcdf_data_format_string = 'netCDF classic'
2600	CASE ( 2 )
2601	netcdf_data_format_string = 'netCDF 64bit offset'
2602	CASE ( 3 )
2603	netcdf_data_format_string = 'netCDF4/HDF5'
2604	CASE ( 4 )
2605	netcdf_data_format_string = 'netCDF4/HDF5 classic'
2606	CASE ( 5 )
2607	netcdf_data_format_string = 'parallel netCDF4/HDF5'
2608	CASE ( 6 )
2609	netcdf_data_format_string = 'parallel netCDF4/HDF5 classic'
2610
2611	END SELECT
2612
2613	!
2614	!-- Check mask conditions
2615	DO mid = 1, max_masks
2616	IF ( data_output_masks(mid,1) /= ' ' .OR. &
2617	data_output_masks_user(mid,1) /= ' ' ) THEN
2618	masks = masks + 1
2619	ENDIF
2620	ENDDO
2621
2622	IF ( masks < 0 .OR. masks > max_masks ) THEN
2623	WRITE( message_string, * ) 'illegal value: masks must be >= 0 and ', &
2624	'<= ', max_masks, ' (=max_masks)'
2625	CALL message( 'check_parameters', 'PA0325', 1, 2, 0, 6, 0 )
2626	ENDIF
2627	IF ( masks > 0 ) THEN
2628	mask_scale(1) = mask_scale_x
2629	mask_scale(2) = mask_scale_y
2630	mask_scale(3) = mask_scale_z
2631	IF ( ANY( mask_scale <= 0.0_wp ) ) THEN
2632	WRITE( message_string, * ) &
2633	'illegal value: mask_scale_x, mask_scale_y and mask_scale_z', &
2634	'must be > 0.0'
2635	CALL message( 'check_parameters', 'PA0326', 1, 2, 0, 6, 0 )
2636	ENDIF
2637	!
2638	!-- Generate masks for masked data output
2639	!-- Parallel netcdf output is not tested so far for masked data, hence
2640	!-- netcdf_data_format is switched back to non-parallel output.
2641	netcdf_data_format_save = netcdf_data_format
2642	IF ( netcdf_data_format > 4 ) THEN
2643	IF ( netcdf_data_format == 5 ) netcdf_data_format = 3
2644	IF ( netcdf_data_format == 6 ) netcdf_data_format = 4
2645	message_string = 'netCDF file formats '// &
2646	'5 (parallel netCDF 4) and ' // &
2647	'6 (parallel netCDF 4 Classic model) '// &
2648	'& are currently not supported (not yet tested) ' //&
2649	'for masked data. &Using respective non-parallel' //&
2650	' output for masked data.'
2651	CALL message( 'check_parameters', 'PA0383', 0, 0, 0, 6, 0 )
2652	ENDIF
2653	CALL init_masks
2654	netcdf_data_format = netcdf_data_format_save
2655	ENDIF
2656
2657	!
2658	!-- Check the NetCDF data format
2659	IF ( netcdf_data_format > 2 ) THEN
2660	#if defined( __netcdf4 )
2661	CONTINUE
2662	#else
2663	message_string = 'netCDF: netCDF4 format requested but no ' // &
2664	'cpp-directive __netcdf4 given & switch ' // &
2665	'back to 64-bit offset format'
2666	CALL message( 'check_parameters', 'PA0171', 0, 1, 0, 6, 0 )
2667	netcdf_data_format = 2
2668	#endif
2669	ENDIF
2670	IF ( netcdf_data_format > 4 ) THEN
2671	#if defined( __netcdf4 ) && defined( __netcdf4_parallel )
2672	CONTINUE
2673	#else
2674	message_string = 'netCDF: netCDF4 parallel output requested but no ' // &
2675	'cpp-directive __netcdf4_parallel given & switch ' //&
2676	'back to netCDF4 non-parallel output'
2677	CALL message( 'check_parameters', 'PA0099', 0, 1, 0, 6, 0 )
2678	netcdf_data_format = netcdf_data_format - 2
2679	#endif
2680	ENDIF
2681
2682	!
2683	!-- Calculate fixed number of output time levels for parallel netcdf output.
2684	!-- The time dimension has to be defined as limited for parallel output,
2685	!-- because otherwise the I/O performance drops significantly.
2686	IF ( netcdf_data_format > 4 ) THEN
2687
2688	!
2689	!-- Check if any of the follwoing data output interval is 0.0s, which is
2690	!-- not allowed for parallel output.
2691	CALL check_dt_do( dt_do3d, 'dt_do3d' )
2692	CALL check_dt_do( dt_do2d_xy, 'dt_do2d_xy' )
2693	CALL check_dt_do( dt_do2d_xz, 'dt_do2d_xz' )
2694	CALL check_dt_do( dt_do2d_yz, 'dt_do2d_yz' )
2695	CALL check_dt_do( dt_data_output_av, 'dt_data_output_av' )
2696
2697	!-- Set needed time levels (ntdim) to
2698	!-- saved time levels + to be saved time levels.
2699	ntdim_3d(0) = do3d_time_count(0) + CEILING( &
2700	( end_time - MAX( &
2701	MERGE(skip_time_do3d, skip_time_do3d + spinup_time, &
2702	data_output_during_spinup ), &
2703	simulated_time_at_begin ) &
2704	) / dt_do3d )
2705	IF ( do3d_at_begin ) ntdim_3d(0) = ntdim_3d(0) + 1
2706
2707	ntdim_3d(1) = do3d_time_count(1) + CEILING( &
2708	( end_time - MAX( &
2709	MERGE( skip_time_data_output_av, skip_time_data_output_av &
2710	+ spinup_time, data_output_during_spinup ), &
2711	simulated_time_at_begin ) &
2712	) / dt_data_output_av )
2713
2714	ntdim_2d_xy(0) = do2d_xy_time_count(0) + CEILING( &
2715	( end_time - MAX( &
2716	MERGE(skip_time_do2d_xy, skip_time_do2d_xy + spinup_time, &
2717	data_output_during_spinup ), &
2718	simulated_time_at_begin ) &
2719	) / dt_do2d_xy )
2720
2721	ntdim_2d_xz(0) = do2d_xz_time_count(0) + CEILING( &
2722	( end_time - MAX( &
2723	MERGE(skip_time_do2d_xz, skip_time_do2d_xz + spinup_time, &
2724	data_output_during_spinup ), &
2725	simulated_time_at_begin ) &
2726	) / dt_do2d_xz )
2727
2728	ntdim_2d_yz(0) = do2d_yz_time_count(0) + CEILING( &
2729	( end_time - MAX( &
2730	MERGE(skip_time_do2d_yz, skip_time_do2d_yz + spinup_time, &
2731	data_output_during_spinup ), &
2732	simulated_time_at_begin ) &
2733	) / dt_do2d_yz )
2734
2735	IF ( do2d_at_begin ) THEN
2736	ntdim_2d_xy(0) = ntdim_2d_xy(0) + 1
2737	ntdim_2d_xz(0) = ntdim_2d_xz(0) + 1
2738	ntdim_2d_yz(0) = ntdim_2d_yz(0) + 1
2739	ENDIF
2740	!
2741	!-- Please note, for averaged 2D data skip_time_data_output_av is the relavant
2742	!-- output control parameter.
2743	ntdim_2d_xy(1) = do2d_xy_time_count(1) + CEILING( &
2744	( end_time - MAX( MERGE( skip_time_data_output_av, &
2745	skip_time_data_output_av + spinup_time, &
2746	data_output_during_spinup ), &
2747	simulated_time_at_begin ) &
2748	) / dt_data_output_av )
2749
2750	ntdim_2d_xz(1) = do2d_xz_time_count(1) + CEILING( &
2751	( end_time - MAX( MERGE( skip_time_data_output_av, &
2752	skip_time_data_output_av + spinup_time, &
2753	data_output_during_spinup ), &
2754	simulated_time_at_begin ) &
2755	) / dt_data_output_av )
2756
2757	ntdim_2d_yz(1) = do2d_yz_time_count(1) + CEILING( &
2758	( end_time - MAX( MERGE( skip_time_data_output_av, &
2759	skip_time_data_output_av + spinup_time, &
2760	data_output_during_spinup ), &
2761	simulated_time_at_begin ) &
2762	) / dt_data_output_av )
2763
2764	ENDIF
2765
2766	!
2767	!-- Check, whether a constant diffusion coefficient shall be used
2768	IF ( km_constant /= -1.0_wp ) THEN
2769	IF ( km_constant < 0.0_wp ) THEN
2770	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2771	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2772	ELSE
2773	IF ( prandtl_number < 0.0_wp ) THEN
2774	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2775	' < 0.0'
2776	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2777	ENDIF
2778	constant_diffusion = .TRUE.
2779
2780	IF ( constant_flux_layer ) THEN
2781	message_string = 'constant_flux_layer is not allowed with fixed ' &
2782	// 'value of km'
2783	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2784	ENDIF
2785	ENDIF
2786	ENDIF
2787
2788	!
2789	!-- In case of non-cyclic lateral boundaries and a damping layer for the
2790	!-- potential temperature, check the width of the damping layer
2791	IF ( bc_lr /= 'cyclic' ) THEN
2792	IF ( pt_damping_width < 0.0_wp .OR. &
2793	pt_damping_width > REAL( (nx+1) * dx ) ) THEN
2794	message_string = 'pt_damping_width out of range'
2795	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2796	ENDIF
2797	ENDIF
2798
2799	IF ( bc_ns /= 'cyclic' ) THEN
2800	IF ( pt_damping_width < 0.0_wp .OR. &
2801	pt_damping_width > REAL( (ny+1) * dy ) ) THEN
2802	message_string = 'pt_damping_width out of range'
2803	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2804	ENDIF
2805	ENDIF
2806
2807	!
2808	!-- Check value range for zeta = z/L
2809	IF ( zeta_min >= zeta_max ) THEN
2810	WRITE( message_string, * ) 'zeta_min = ', zeta_min, ' must be less ', &
2811	'than zeta_max = ', zeta_max
2812	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2813	ENDIF
2814
2815	!
2816	!-- Check random generator
2817	IF ( (random_generator /= 'system-specific' .AND. &
2818	random_generator /= 'random-parallel' ) .AND. &
2819	random_generator /= 'numerical-recipes' ) THEN
2820	message_string = 'unknown random generator: random_generator = "' // &
2821	TRIM( random_generator ) // '"'
2822	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2823	ENDIF
2824
2825	!
2826	!-- Determine upper and lower hight level indices for random perturbations
2827	IF ( disturbance_level_b == -9999999.9_wp ) THEN
2828	IF ( ocean_mode ) THEN
2829	disturbance_level_b = zu((nzt*2)/3)
2830	disturbance_level_ind_b = ( nzt * 2 ) / 3
2831	ELSE
2832	disturbance_level_b = zu(nzb+3)
2833	disturbance_level_ind_b = nzb + 3
2834	ENDIF
2835	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2836	WRITE( message_string, * ) 'disturbance_level_b = ', &
2837	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2838	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2839	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2840	WRITE( message_string, * ) 'disturbance_level_b = ', &
2841	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2842	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2843	ELSE
2844	DO k = 3, nzt-2
2845	IF ( disturbance_level_b <= zu(k) ) THEN
2846	disturbance_level_ind_b = k
2847	EXIT
2848	ENDIF
2849	ENDDO
2850	ENDIF
2851
2852	IF ( disturbance_level_t == -9999999.9_wp ) THEN
2853	IF ( ocean_mode ) THEN
2854	disturbance_level_t = zu(nzt-3)
2855	disturbance_level_ind_t = nzt - 3
2856	ELSE
2857	disturbance_level_t = zu(nzt/3)
2858	disturbance_level_ind_t = nzt / 3
2859	ENDIF
2860	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2861	WRITE( message_string, * ) 'disturbance_level_t = ', &
2862	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2863	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2864	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2865	WRITE( message_string, * ) 'disturbance_level_t = ', &
2866	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2867	disturbance_level_b
2868	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2869	ELSE
2870	DO k = 3, nzt-2
2871	IF ( disturbance_level_t <= zu(k) ) THEN
2872	disturbance_level_ind_t = k
2873	EXIT
2874	ENDIF
2875	ENDDO
2876	ENDIF
2877
2878	!
2879	!-- Check again whether the levels determined this way are ok.
2880	!-- Error may occur at automatic determination and too few grid points in
2881	!-- z-direction.
2882	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2883	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2884	disturbance_level_ind_t, ' must be >= ', &
2885	'disturbance_level_ind_b = ', disturbance_level_ind_b
2886	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2887	ENDIF
2888
2889	!
2890	!-- Determine the horizontal index range for random perturbations.
2891	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2892	!-- near the inflow and the perturbation area is further limited to ...(1)
2893	!-- after the initial phase of the flow.
2894
2895	IF ( bc_lr /= 'cyclic' ) THEN
2896	IF ( inflow_disturbance_begin == -1 ) THEN
2897	inflow_disturbance_begin = MIN( 10, nx/2 )
2898	ENDIF
2899	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2900	THEN
2901	message_string = 'inflow_disturbance_begin out of range'
2902	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2903	ENDIF
2904	IF ( inflow_disturbance_end == -1 ) THEN
2905	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2906	ENDIF
2907	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2908	THEN
2909	message_string = 'inflow_disturbance_end out of range'
2910	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2911	ENDIF
2912	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2913	IF ( inflow_disturbance_begin == -1 ) THEN
2914	inflow_disturbance_begin = MIN( 10, ny/2 )
2915	ENDIF
2916	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2917	THEN
2918	message_string = 'inflow_disturbance_begin out of range'
2919	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2920	ENDIF
2921	IF ( inflow_disturbance_end == -1 ) THEN
2922	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2923	ENDIF
2924	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2925	THEN
2926	message_string = 'inflow_disturbance_end out of range'
2927	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2928	ENDIF
2929	ENDIF
2930
2931	IF ( random_generator == 'random-parallel' ) THEN
2932	dist_nxl = nxl; dist_nxr = nxr
2933	dist_nys = nys; dist_nyn = nyn
2934	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2935	dist_nxr = MIN( nx - inflow_disturbance_begin, nxr )
2936	dist_nxl(1) = MAX( nx - inflow_disturbance_end, nxl )
2937	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2938	dist_nxl = MAX( inflow_disturbance_begin, nxl )
2939	dist_nxr(1) = MIN( inflow_disturbance_end, nxr )
2940	ELSEIF ( bc_lr == 'nested' .OR. bc_lr == 'nesting_offline' ) THEN
2941	dist_nxl = MAX( inflow_disturbance_begin, nxl )
2942	dist_nxr = MIN( nx - inflow_disturbance_begin, nxr )
2943	ENDIF
2944	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2945	dist_nyn = MIN( ny - inflow_disturbance_begin, nyn )
2946	dist_nys(1) = MAX( ny - inflow_disturbance_end, nys )
2947	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2948	dist_nys = MAX( inflow_disturbance_begin, nys )
2949	dist_nyn(1) = MIN( inflow_disturbance_end, nyn )
2950	ELSEIF ( bc_ns == 'nested' .OR. bc_ns == 'nesting_offline' ) THEN
2951	dist_nys = MAX( inflow_disturbance_begin, nys )
2952	dist_nyn = MIN( ny - inflow_disturbance_begin, nyn )
2953	ENDIF
2954	ELSE
2955	dist_nxl = 0; dist_nxr = nx
2956	dist_nys = 0; dist_nyn = ny
2957	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2958	dist_nxr = nx - inflow_disturbance_begin
2959	dist_nxl(1) = nx - inflow_disturbance_end
2960	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2961	dist_nxl = inflow_disturbance_begin
2962	dist_nxr(1) = inflow_disturbance_end
2963	ELSEIF ( bc_lr == 'nested' .OR. bc_lr == 'nesting_offline' ) THEN
2964	dist_nxr = nx - inflow_disturbance_begin
2965	dist_nxl = inflow_disturbance_begin
2966	ENDIF
2967	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2968	dist_nyn = ny - inflow_disturbance_begin
2969	dist_nys(1) = ny - inflow_disturbance_end
2970	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2971	dist_nys = inflow_disturbance_begin
2972	dist_nyn(1) = inflow_disturbance_end
2973	ELSEIF ( bc_ns == 'nested' .OR. bc_ns == 'nesting_offline' ) THEN
2974	dist_nyn = ny - inflow_disturbance_begin
2975	dist_nys = inflow_disturbance_begin
2976	ENDIF
2977	ENDIF
2978
2979	!
2980	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2981	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2982	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2983	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2984	'condition at the inflow boundary'
2985	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2986	ENDIF
2987
2988	!
2989	!-- Turbulent inflow requires that 3d arrays have been cyclically filled with
2990	!-- data from prerun in the first main run
2991	IF ( turbulent_inflow .AND. initializing_actions /= 'cyclic_fill' .AND. &
2992	initializing_actions /= 'read_restart_data' ) THEN
2993	message_string = 'turbulent_inflow = .T. requires ' // &
2994	'initializing_actions = ''cyclic_fill'' or ' // &
2995	'initializing_actions = ''read_restart_data'' '
2996	CALL message( 'check_parameters', 'PA0055', 1, 2, 0, 6, 0 )
2997	ENDIF
2998
2999	!
3000	!-- In case of turbulent inflow
3001	IF ( turbulent_inflow ) THEN
3002
3003	!
3004	!-- Calculate the index of the recycling plane
3005	IF ( recycling_width <= dx .OR. recycling_width >= nx * dx ) THEN
3006	WRITE( message_string, * ) 'illegal value for recycling_width: ', &
3007	recycling_width
3008	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
3009	ENDIF
3010	!
3011	!-- Calculate the index
3012	recycling_plane = recycling_width / dx
3013	!
3014	!-- Check for correct input of recycling method for thermodynamic quantities
3015	IF ( TRIM( recycling_method_for_thermodynamic_quantities ) /= 'turbulent_fluctuation' .AND. &
3016	TRIM( recycling_method_for_thermodynamic_quantities ) /= 'absolute_value' ) THEN
3017	WRITE( message_string, * ) 'unknown recycling method for thermodynamic quantities: ', &
3018	TRIM( recycling_method_for_thermodynamic_quantities )
3019	CALL message( 'check_parameters', 'PA0184', 1, 2, 0, 6, 0 )
3020	ENDIF
3021
3022	ENDIF
3023
3024
3025	IF ( turbulent_outflow ) THEN
3026	!
3027	!-- Turbulent outflow requires Dirichlet conditions at the respective inflow
3028	!-- boundary (so far, a turbulent outflow is realized at the right side only)
3029	IF ( bc_lr /= 'dirichlet/radiation' ) THEN
3030	message_string = 'turbulent_outflow = .T. requires ' // &
3031	'bc_lr = "dirichlet/radiation"'
3032	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
3033	ENDIF
3034	!
3035	!-- The ouflow-source plane must lay inside the model domain
3036	IF ( outflow_source_plane < dx .OR. &
3037	outflow_source_plane > nx * dx ) THEN
3038	WRITE( message_string, * ) 'illegal value for outflow_source'// &
3039	'_plane: ', outflow_source_plane
3040	CALL message( 'check_parameters', 'PA0145', 1, 2, 0, 6, 0 )
3041	ENDIF
3042	ENDIF
3043
3044	!
3045	!-- Determine damping level index for 1D model
3046	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
3047	IF ( damp_level_1d == -1.0_wp ) THEN
3048	damp_level_1d = zu(nzt+1)
3049	damp_level_ind_1d = nzt + 1
3050	ELSEIF ( damp_level_1d < 0.0_wp .OR. damp_level_1d > zu(nzt+1) ) THEN
3051	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
3052	' must be >= 0.0 and <= ', zu(nzt+1), '(zu(nzt+1))'
3053	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
3054	ELSE
3055	DO k = 1, nzt+1
3056	IF ( damp_level_1d <= zu(k) ) THEN
3057	damp_level_ind_1d = k
3058	EXIT
3059	ENDIF
3060	ENDDO
3061	ENDIF
3062	ENDIF
3063
3064	!
3065	!-- Check some other 1d-model parameters
3066	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3067	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
3068	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
3069	'" is unknown'
3070	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
3071	ENDIF
3072	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
3073	TRIM( dissipation_1d ) /= 'detering' .AND. &
3074	TRIM( dissipation_1d ) /= 'prognostic' ) THEN
3075	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3076	'" is unknown'
3077	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
3078	ENDIF
3079	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
3080	TRIM( dissipation_1d ) == 'as_in_3d_model' ) THEN
3081	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
3082	'" requires mixing_length_1d = "as_in_3d_model"'
3083	CALL message( 'check_parameters', 'PA0485', 1, 2, 0, 6, 0 )
3084	ENDIF
3085
3086	!
3087	!-- Set time for the next user defined restart (time_restart is the
3088	!-- internal parameter for steering restart events)
3089	IF ( restart_time /= 9999999.9_wp ) THEN
3090	IF ( restart_time > time_since_reference_point ) THEN
3091	time_restart = restart_time
3092	ENDIF
3093	ELSE
3094	!
3095	!-- In case of a restart run, set internal parameter to default (no restart)
3096	!-- if the NAMELIST-parameter restart_time is omitted
3097	time_restart = 9999999.9_wp
3098	ENDIF
3099
3100	!
3101	!-- Check pressure gradient conditions
3102	IF ( dp_external .AND. conserve_volume_flow ) THEN
3103	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flo', &
3104	'w are .TRUE. but one of them must be .FALSE.'
3105	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
3106	ENDIF
3107	IF ( dp_external ) THEN
3108	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
3109	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
3110	' of range [zu(nzb), zu(nzt)]'
3111	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
3112	ENDIF
3113	IF ( .NOT. ANY( dpdxy /= 0.0_wp ) ) THEN
3114	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is ze', &
3115	'ro, i.e. the external pressure gradient will not be applied'
3116	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
3117	ENDIF
3118	ENDIF
3119	IF ( ANY( dpdxy /= 0.0_wp ) .AND. .NOT. dp_external ) THEN
3120	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
3121	'.FALSE., i.e. the external pressure gradient & will not be applied'
3122	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
3123	ENDIF
3124	IF ( conserve_volume_flow ) THEN
3125	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
3126
3127	conserve_volume_flow_mode = 'initial_profiles'
3128
3129	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
3130	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
3131	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
3132	conserve_volume_flow_mode
3133	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
3134	ENDIF
3135	IF ( (bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic') .AND. &
3136	TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
3137	WRITE( message_string, * ) 'non-cyclic boundary conditions ', &
3138	'require conserve_volume_flow_mode = ''initial_profiles'''
3139	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
3140	ENDIF
3141	ENDIF
3142	IF ( ( u_bulk /= 0.0_wp .OR. v_bulk /= 0.0_wp ) .AND. &
3143	( .NOT. conserve_volume_flow .OR. &
3144	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
3145	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
3146	'conserve_volume_flow = .T. and ', &
3147	'conserve_volume_flow_mode = ''bulk_velocity'''
3148	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
3149	ENDIF
3150
3151	!
3152	!-- Prevent empty time records in volume, cross-section and masked data in case
3153	!-- of non-parallel netcdf-output in restart runs
3154	IF ( netcdf_data_format < 5 ) THEN
3155	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
3156	do3d_time_count = 0
3157	do2d_xy_time_count = 0
3158	do2d_xz_time_count = 0
3159	do2d_yz_time_count = 0
3160	domask_time_count = 0
3161	ENDIF
3162	ENDIF
3163
3164
3165	!
3166	!-- Check roughness length, which has to be smaller than dz/2
3167	IF ( ( constant_flux_layer .OR. &
3168	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) &
3169	.AND. roughness_length >= 0.5 * dz(1) ) THEN
3170	message_string = 'roughness_length must be smaller than dz/2'
3171	CALL message( 'check_parameters', 'PA0424', 1, 2, 0, 6, 0 )
3172	ENDIF
3173
3174	!
3175	!-- Vertical nesting: check fine and coarse grid compatibility for data exchange
3176	IF ( vnested ) CALL vnest_check_parameters
3177
3178	!
3179	!-- Check if topography is read from file in case of complex terrain simulations
3180	IF ( complex_terrain .AND. TRIM( topography ) /= 'read_from_file' ) THEN
3181	message_string = 'complex_terrain requires topography' // &
3182	' = ''read_from_file'''
3183	CALL message( 'check_parameters', 'PA0295', 1, 2, 0, 6, 0 )
3184	ENDIF
3185
3186	!
3187	!-- Check if vertical grid stretching is switched off in case of complex
3188	!-- terrain simulations
3189	IF ( complex_terrain .AND. &
3190	ANY( dz_stretch_level_start /= -9999999.9_wp ) ) THEN
3191	message_string = 'Vertical grid stretching is not allowed for ' // &
3192	'complex_terrain = .T.'
3193	CALL message( 'check_parameters', 'PA0473', 1, 2, 0, 6, 0 )
3194	ENDIF
3195
3196	CALL location_message( 'checking parameters', 'finished' )
3197
3198	CONTAINS
3199
3200	!------------------------------------------------------------------------------!
3201	! Description:
3202	! ------------
3203	!> Check the length of data output intervals. In case of parallel NetCDF output
3204	!> the time levels of the output files need to be fixed. Therefore setting the
3205	!> output interval to 0.0s (usually used to output each timestep) is not
3206	!> possible as long as a non-fixed timestep is used.
3207	!------------------------------------------------------------------------------!
3208
3209	SUBROUTINE check_dt_do( dt_do, dt_do_name )
3210
3211	IMPLICIT NONE
3212
3213	CHARACTER (LEN=*), INTENT (IN) :: dt_do_name !< parin variable name
3214
3215	REAL(wp), INTENT (INOUT) :: dt_do !< data output interval
3216
3217	IF ( dt_do == 0.0_wp ) THEN
3218	IF ( dt_fixed ) THEN
3219	WRITE( message_string, '(A,F9.4,A)' ) 'Output at every ' // &
3220	'timestep is wanted (' // dt_do_name // ' = 0.0).&'// &
3221	'The output interval is set to the fixed timestep dt '// &
3222	'= ', dt, 's.'
3223	CALL message( 'check_parameters', 'PA0060', 0, 0, 0, 6, 0 )
3224	dt_do = dt
3225	ELSE
3226	message_string = dt_do_name // ' = 0.0 while using a ' // &
3227	'variable timestep and parallel netCDF4 ' // &
3228	'is not allowed.'
3229	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
3230	ENDIF
3231	ENDIF
3232
3233	END SUBROUTINE check_dt_do
3234
3235
3236
3237	!------------------------------------------------------------------------------!
3238	! Description:
3239	! ------------
3240	!> Set the bottom and top boundary conditions for humidity and scalars.
3241	!------------------------------------------------------------------------------!
3242
3243	SUBROUTINE set_bc_scalars( sq, bc_b, bc_t, ibc_b, ibc_t, err_nr_b, err_nr_t )
3244
3245
3246	IMPLICIT NONE
3247
3248	CHARACTER (LEN=1) :: sq !< name of scalar quantity
3249	CHARACTER (LEN=*) :: bc_b !< bottom boundary condition
3250	CHARACTER (LEN=*) :: bc_t !< top boundary condition
3251	CHARACTER (LEN=*) :: err_nr_b !< error number if bottom bc is unknown
3252	CHARACTER (LEN=*) :: err_nr_t !< error number if top bc is unknown
3253
3254	INTEGER(iwp) :: ibc_b !< index for bottom boundary condition
3255	INTEGER(iwp) :: ibc_t !< index for top boundary condition
3256
3257	!
3258	!-- Set Integer flags and check for possilbe errorneous settings for bottom
3259	!-- boundary condition
3260	IF ( bc_b == 'dirichlet' ) THEN
3261	ibc_b = 0
3262	ELSEIF ( bc_b == 'neumann' ) THEN
3263	ibc_b = 1
3264	ELSE
3265	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
3266	'_b ="' // TRIM( bc_b ) // '"'
3267	CALL message( 'check_parameters', err_nr_b, 1, 2, 0, 6, 0 )
3268	ENDIF
3269	!
3270	!-- Set Integer flags and check for possilbe errorneous settings for top
3271	!-- boundary condition
3272	IF ( bc_t == 'dirichlet' ) THEN
3273	ibc_t = 0
3274	ELSEIF ( bc_t == 'neumann' ) THEN
3275	ibc_t = 1
3276	ELSEIF ( bc_t == 'initial_gradient' ) THEN
3277	ibc_t = 2
3278	ELSEIF ( bc_t == 'nested' .OR. bc_t == 'nesting_offline' ) THEN
3279	ibc_t = 3
3280	ELSE
3281	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
3282	'_t ="' // TRIM( bc_t ) // '"'
3283	CALL message( 'check_parameters', err_nr_t, 1, 2, 0, 6, 0 )
3284	ENDIF
3285
3286
3287	END SUBROUTINE set_bc_scalars
3288
3289
3290
3291	!------------------------------------------------------------------------------!
3292	! Description:
3293	! ------------
3294	!> Check for consistent settings of bottom boundary conditions for humidity
3295	!> and scalars.
3296	!------------------------------------------------------------------------------!
3297
3298	SUBROUTINE check_bc_scalars( sq, bc_b, ibc_b, &
3299	err_nr_1, err_nr_2, &
3300	constant_flux, surface_initial_change )
3301
3302
3303	IMPLICIT NONE
3304
3305	CHARACTER (LEN=1) :: sq !< name of scalar quantity
3306	CHARACTER (LEN=*) :: bc_b !< bottom boundary condition
3307	CHARACTER (LEN=*) :: err_nr_1 !< error number of first error
3308	CHARACTER (LEN=*) :: err_nr_2 !< error number of second error
3309
3310	INTEGER(iwp) :: ibc_b !< index of bottom boundary condition
3311
3312	LOGICAL :: constant_flux !< flag for constant-flux layer
3313
3314	REAL(wp) :: surface_initial_change !< value of initial change at the surface
3315
3316	!
3317	!-- A given surface value implies Dirichlet boundary condition for
3318	!-- the respective quantity. In this case specification of a constant flux is
3319	!-- forbidden. However, an exception is made for large-scale forcing as well
3320	!-- as land-surface model.
3321	IF ( .NOT. land_surface .AND. .NOT. large_scale_forcing ) THEN
3322	IF ( ibc_b == 0 .AND. constant_flux ) THEN
3323	message_string = 'boundary condition: bc_' // TRIM( sq ) // &
3324	'_b ' // '= "' // TRIM( bc_b ) // &
3325	'" is not allowed with prescribed surface flux'
3326	CALL message( 'check_parameters', err_nr_1, 1, 2, 0, 6, 0 )
3327	ENDIF
3328	ENDIF
3329	IF ( constant_flux .AND. surface_initial_change /= 0.0_wp ) THEN
3330	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
3331	'wed with ', sq, '_surface_initial_change (/=0) = ', &
3332	surface_initial_change
3333	CALL message( 'check_parameters', err_nr_2, 1, 2, 0, 6, 0 )
3334	ENDIF
3335
3336
3337	END SUBROUTINE check_bc_scalars
3338
3339
3340
3341	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 4366

Download in other formats: