Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 324

Last change on this file since 324 was 308, checked in by letzel, 16 years ago
Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1 (check_parameters)
Property svn:keywords set to `Id`
File size: 117.4 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Check for illegal entries in section_xy\|xz\|yz that exceed nz+1\|ny+1\|nx+1
7	! Coupling with independent precursor runs.
8	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
9	! Bugfix: pressure included for profile output
10	! Check pressure gradient conditions
11	! topography_grid_convention moved from user_check_parameters
12	! 'single_street_canyon'
13	!
14	! Former revisions:
15	! -----------------
16	! $Id: check_parameters.f90 308 2009-04-29 09:26:10Z weinreis $
17	!
18	! 222 2009-01-12 16:04:16Z letzel
19	! +user_check_parameters
20	! Output of messages replaced by message handling routine.
21	! Implementation of an MPI-1 coupling: replaced myid with target_id,
22	! deleted __mpi2 directives
23	! Check that PALM is called with mrun -K parallel for coupling
24	!
25	! 197 2008-09-16 15:29:03Z raasch
26	! Bug fix: Construction of vertical profiles when 10 gradients have been
27	! specified in the parameter list (ug, vg, pt, q, sa, lad)
28	!
29	! Strict grid matching along z is not needed for mg-solver.
30	! Leaf area density (LAD) explicitly set to its surface value at k=0
31	! Case of reading data for recycling included in initializing_actions,
32	! check of turbulent_inflow and calculation of recycling_plane.
33	! q*2 profile added
34	!
35	! 138 2007-11-28 10:03:58Z letzel
36	! Plant canopy added
37	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
38	! Multigrid solver allows topography, checking of dt_sort_particles
39	! Bugfix: initializing u_init and v_init in case of ocean runs
40	!
41	! 109 2007-08-28 15:26:47Z letzel
42	! Check coupling_mode and set default (obligatory) values (like boundary
43	! conditions for temperature and fluxes) in case of coupled runs.
44	! +profiles for wp and w"e
45	! Bugfix: Error message concerning output of particle concentration (pc)
46	! modified
47	! More checks and more default values for coupled runs
48	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
49	! cloud_physics = .T.)
50	! Rayleigh damping for ocean fixed.
51	! Check and, if necessary, set default value for dt_coupling
52	!
53	! 97 2007-06-21 08:23:15Z raasch
54	! Initial salinity profile is calculated, salinity boundary conditions are
55	! checked,
56	! z_max_do1d is checked only in case of ocean = .f.,
57	! +initial temperature and geostrophic velocity profiles for the ocean version,
58	! use_pt_reference renamed use_reference
59	!
60	! 89 2007-05-25 12:08:31Z raasch
61	! Check for user-defined profiles
62	!
63	! 75 2007-03-22 09:54:05Z raasch
64	! "by_user" allowed as initializing action, -data_output_ts,
65	! leapfrog with non-flat topography not allowed any more, loop_optimization
66	! and pt_reference are checked, moisture renamed humidity,
67	! output of precipitation amount/rate and roughnes length + check
68	! possible negative humidities are avoided in initial profile,
69	! dirichlet/neumann changed to dirichlet/radiation, etc.,
70	! revision added to run_description_header
71	!
72	! 20 2007-02-26 00:12:32Z raasch
73	! Temperature and humidity gradients at top are now calculated for nzt+1,
74	! top_heatflux and respective boundary condition bc_pt_t is checked
75	!
76	! RCS Log replace by Id keyword, revision history cleaned up
77	!
78	! Revision 1.61 2006/08/04 14:20:25 raasch
79	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
80	! use_upstream_for_tke, default value for dt_dopts,
81	! generation of file header moved from routines palm and header to here
82	!
83	! Revision 1.1 1997/08/26 06:29:23 raasch
84	! Initial revision
85	!
86	!
87	! Description:
88	! ------------
89	! Check control parameters and deduce further quantities.
90	!------------------------------------------------------------------------------!
91
92	USE arrays_3d
93	USE constants
94	USE control_parameters
95	USE dvrp_variables
96	USE grid_variables
97	USE indices
98	USE model_1d
99	USE netcdf_control
100	USE particle_attributes
101	USE pegrid
102	USE profil_parameter
103	USE statistics
104	USE transpose_indices
105
106	IMPLICIT NONE
107
108	CHARACTER (LEN=1) :: sq
109	CHARACTER (LEN=6) :: var
110	CHARACTER (LEN=7) :: unit
111	CHARACTER (LEN=8) :: date
112	CHARACTER (LEN=10) :: time
113	CHARACTER (LEN=40) :: coupling_string
114	CHARACTER (LEN=100) :: action
115
116	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
117	position, prec
118	LOGICAL :: found, ldum
119	REAL :: gradient, maxn, maxp, remote = 0.0, &
120	simulation_time_since_reference
121
122	!
123	!-- Warning, if host is not set
124	IF ( host(1:1) == ' ' ) THEN
125	message_string = '"host" is not set. Please check that environment ' // &
126	'variable "localhost" & is set before running PALM'
127	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
128	ENDIF
129
130	!
131	!-- Check the coupling mode
132	IF ( coupling_mode /= 'uncoupled' .AND. &
133	coupling_mode /= 'atmosphere_to_ocean' .AND. &
134	coupling_mode /= 'ocean_to_atmosphere' ) THEN
135	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
136	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
137	ENDIF
138
139	!
140	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
141	IF ( coupling_mode /= 'uncoupled' ) THEN
142
143	IF ( dt_coupling == 9999999.9 ) THEN
144	message_string = 'dt_coupling is not set but required for coup' // &
145	'ling mode "' // TRIM( coupling_mode ) // '"'
146	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
147	ENDIF
148
149	#if defined( __parallel )
150	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
151	ierr )
152	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
153	status, ierr )
154	IF ( dt_coupling /= remote ) THEN
155	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
156	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
157	'dt_coupling_remote = ', remote
158	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
159	ENDIF
160	IF ( dt_coupling <= 0.0 ) THEN
161	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
162	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
163	status, ierr )
164	dt_coupling = MAX( dt_max, remote )
165	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
166	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
167	'MAX(dt_max(A,O)) = ', dt_coupling
168	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
169	ENDIF
170
171	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
172	ierr )
173	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
174	status, ierr )
175	IF ( restart_time /= remote ) THEN
176	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
177	'": restart_time = ', restart_time, '& is not equal to ', &
178	'restart_time_remote = ', remote
179	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
180	ENDIF
181
182	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
183	ierr )
184	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
185	status, ierr )
186	IF ( dt_restart /= remote ) THEN
187	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
188	'": dt_restart = ', dt_restart, '& is not equal to ', &
189	'dt_restart_remote = ', remote
190	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
191	ENDIF
192
193	simulation_time_since_reference = end_time - coupling_start_time
194	CALL MPI_SEND( simulation_time_since_reference, 1, MPI_REAL, target_id, &
195	14, comm_inter, ierr )
196	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
197	status, ierr )
198	IF ( simulation_time_since_reference /= remote ) THEN
199	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
200	'": simulation_time_since_reference = ', &
201	simulation_time_since_reference, '& is not equal to ', &
202	'simulation_time_since_reference_remote = ', remote
203	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
204	ENDIF
205
206	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
207	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
208	status, ierr )
209	IF ( dx /= remote ) THEN
210	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
211	'": dx = ', dx, '& is not equal to dx_remote = ', remote
212	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
213	ENDIF
214
215	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
216	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
217	status, ierr )
218	IF ( dy /= remote ) THEN
219	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
220	'": dy = ', dy, '& is not equal to dy_remote = ', remote
221	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
222	ENDIF
223
224	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
225	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
226	status, ierr )
227	IF ( nx /= iremote ) THEN
228	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
229	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
230	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
231	ENDIF
232
233	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
234	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
235	status, ierr )
236	IF ( ny /= iremote ) THEN
237	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
238	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
239	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
240	ENDIF
241	#else
242	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
243	' ''mrun -K parallel'''
244	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
245	#endif
246	ENDIF
247
248	#if defined( __parallel )
249	!
250	!-- Exchange via intercommunicator
251	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
252	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
253	ierr )
254	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
255	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
256	comm_inter, status, ierr )
257	ENDIF
258	#endif
259
260
261	!
262	!-- Generate the file header which is used as a header for most of PALM's
263	!-- output files
264	CALL DATE_AND_TIME( date, time )
265	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
266	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
267	IF ( coupling_mode == 'uncoupled' ) THEN
268	coupling_string = ''
269	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
270	coupling_string = ' coupled (atmosphere)'
271	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
272	coupling_string = ' coupled (ocean)'
273	ENDIF
274
275	WRITE ( run_description_header, &
276	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
277	TRIM( version ), TRIM( revision ), 'run: ', &
278	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
279	'host: ', TRIM( host ), run_date, run_time
280
281	!
282	!-- Check the general loop optimization method
283	IF ( loop_optimization == 'default' ) THEN
284	IF ( host(1:3) == 'nec' ) THEN
285	loop_optimization = 'vector'
286	ELSE
287	loop_optimization = 'cache'
288	ENDIF
289	ENDIF
290	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
291	.AND. loop_optimization /= 'vector' ) THEN
292	message_string = 'illegal value given for loop_optimization: "' // &
293	TRIM( loop_optimization ) // '"'
294	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
295	ENDIF
296
297	!
298	!-- Check topography setting (check for illegal parameter combinations)
299	IF ( topography /= 'flat' ) THEN
300	action = ' '
301	IF ( scalar_advec /= 'pw-scheme' ) THEN
302	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
303	ENDIF
304	IF ( momentum_advec /= 'pw-scheme' ) THEN
305	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
306	ENDIF
307	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
308	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
309	ENDIF
310	IF ( psolver == 'sor' ) THEN
311	WRITE( action, '(A,A)' ) 'psolver = ', psolver
312	ENDIF
313	IF ( sloping_surface ) THEN
314	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
315	ENDIF
316	IF ( galilei_transformation ) THEN
317	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
318	ENDIF
319	IF ( cloud_physics ) THEN
320	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
321	ENDIF
322	IF ( cloud_droplets ) THEN
323	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
324	ENDIF
325	IF ( humidity ) THEN
326	WRITE( action, '(A)' ) 'humidity = .TRUE.'
327	ENDIF
328	IF ( .NOT. prandtl_layer ) THEN
329	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
330	ENDIF
331	IF ( action /= ' ' ) THEN
332	message_string = 'a non-flat topography does not allow ' // &
333	TRIM( action )
334	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
335	ENDIF
336	!
337	!-- In case of non-flat topography, check whether the convention how to
338	!-- define the topography grid has been set correctly, or whether the default
339	!-- is applicable. If this is not possible, abort.
340	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
341	IF ( TRIM( topography ) /= 'single_building' .AND. &
342	TRIM( topography ) /= 'single_street_canyon' .AND. &
343	TRIM( topography ) /= 'read_from_file' ) THEN
344	!-- The default value is not applicable here, because it is only valid
345	!-- for the two standard cases 'single_building' and 'read_from_file'
346	!-- defined in init_grid.
347	WRITE( message_string, * ) &
348	'The value for "topography_grid_convention" ', &
349	'is not set. Its default value is & only valid for ', &
350	'"topography" = ''single_building'', ', &
351	'''single_street_canyon'' & or ''read_from_file''.', &
352	' & Choose ''cell_edge'' or ''cell_center''.'
353	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
354	ELSE
355	!-- The default value is applicable here.
356	!-- Set convention according to topography.
357	IF ( TRIM( topography ) == 'single_building' .OR. &
358	TRIM( topography ) == 'single_street_canyon' ) THEN
359	topography_grid_convention = 'cell_edge'
360	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
361	topography_grid_convention = 'cell_center'
362	ENDIF
363	ENDIF
364	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
365	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
366	WRITE( message_string, * ) &
367	'The value for "topography_grid_convention" is ', &
368	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
369	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
370	ENDIF
371
372	ENDIF
373
374	!
375	!-- Check ocean setting
376	IF ( ocean ) THEN
377	action = ' '
378	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
379	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
380	ENDIF
381	IF ( momentum_advec == 'ups-scheme' ) THEN
382	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
383	ENDIF
384	IF ( action /= ' ' ) THEN
385	message_string = 'ocean = .T. does not allow ' // TRIM( action )
386	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
387	ENDIF
388	ENDIF
389
390	!
391	!-- Check whether an (uncoupled) atmospheric run has been declared as an
392	!-- ocean run (this setting is done via mrun-option -y)
393	IF ( TRIM( coupling_mode ) == 'uncoupled' .AND. &
394	TRIM( coupling_char ) == '_O' ) THEN
395	message_string = 'ocean = .F. does not allow coupling_char = "' // &
396	TRIM( coupling_char ) // '" set by mrun-option "-y"'
397	CALL message( 'check_parameters', 'PA0317', 1, 2, 0, 6, 0 )
398	ENDIF
399
400	!
401	!-- Check whether there are any illegal values
402	!-- Pressure solver:
403	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
404	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
405	message_string = 'unknown solver for perturbation pressure: psolver' // &
406	' = "' // TRIM( psolver ) // '"'
407	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
408	ENDIF
409
410	#if defined( __parallel )
411	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
412	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
413	'for a 1d domain-decomposition along x & please do' // &
414	' not set npey/=1 in the parameter file'
415	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
416	ENDIF
417	IF ( psolver == 'poisfft_hybrid' .AND. &
418	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
419	psolver == 'multigrid' .AND. &
420	( nxra > nxr .OR. nyna > nyn ) ) THEN
421	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
422	'work for subdomains with unequal size & please ' // &
423	'set grid_matching = ''strict'' in the parameter file'
424	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
425	ENDIF
426	#else
427	IF ( psolver == 'poisfft_hybrid' ) THEN
428	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
429	' for a parallel environment'
430	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
431	ENDIF
432	#endif
433
434	IF ( psolver == 'multigrid' ) THEN
435	IF ( cycle_mg == 'w' ) THEN
436	gamma_mg = 2
437	ELSEIF ( cycle_mg == 'v' ) THEN
438	gamma_mg = 1
439	ELSE
440	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
441	TRIM( cycle_mg ) // '"'
442	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
443	ENDIF
444	ENDIF
445
446	IF ( fft_method /= 'singleton-algorithm' .AND. &
447	fft_method /= 'temperton-algorithm' .AND. &
448	fft_method /= 'system-specific' ) THEN
449	message_string = 'unknown fft-algorithm: fft_method = "' // &
450	TRIM( fft_method ) // '"'
451	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
452	ENDIF
453
454	!
455	!-- Advection schemes:
456	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
457	THEN
458	message_string = 'unknown advection scheme: momentum_advec = "' // &
459	TRIM( momentum_advec ) // '"'
460	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
461	ENDIF
462	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
463	.AND. timestep_scheme /= 'euler' ) THEN
464	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
465	'" is not allowed with timestep_scheme = "' // &
466	TRIM( timestep_scheme ) // '"'
467	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
468	ENDIF
469
470	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
471	scalar_advec /= 'ups-scheme' ) THEN
472	message_string = 'unknown advection scheme: scalar_advec = "' // &
473	TRIM( scalar_advec ) // '"'
474	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
475	ENDIF
476
477	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
478	use_upstream_for_tke = .TRUE.
479	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
480	'use_sgs_for_particles = .TRUE.'
481	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
482	ENDIF
483
484	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
485	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
486	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
487	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
488	ENDIF
489
490	!
491	!-- Timestep schemes:
492	SELECT CASE ( TRIM( timestep_scheme ) )
493
494	CASE ( 'euler' )
495	intermediate_timestep_count_max = 1
496	asselin_filter_factor = 0.0
497
498	CASE ( 'leapfrog', 'leapfrog+euler' )
499	intermediate_timestep_count_max = 1
500
501	CASE ( 'runge-kutta-2' )
502	intermediate_timestep_count_max = 2
503	asselin_filter_factor = 0.0
504
505	CASE ( 'runge-kutta-3' )
506	intermediate_timestep_count_max = 3
507	asselin_filter_factor = 0.0
508
509	CASE DEFAULT
510	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
511	TRIM( timestep_scheme ) // '"'
512	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
513
514	END SELECT
515
516	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
517	THEN
518	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
519	'" & does not work with timestep_scheme "' // &
520	TRIM( timestep_scheme ) // '"'
521	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
522	ENDIF
523
524	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
525	THEN
526	message_string = 'momentum advection scheme "' // &
527	TRIM( momentum_advec ) // '" & does not work with ' // &
528	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
529	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
530	ENDIF
531
532	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
533	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
534	!
535	!-- No restart run: several initialising actions are possible
536	action = initializing_actions
537	DO WHILE ( TRIM( action ) /= '' )
538	position = INDEX( action, ' ' )
539	SELECT CASE ( action(1:position-1) )
540
541	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
542	'by_user', 'initialize_vortex', 'initialize_ptanom' )
543	action = action(position+1:)
544
545	CASE DEFAULT
546	message_string = 'initializing_action = "' // &
547	TRIM( action ) // '" unkown or not allowed'
548	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
549
550	END SELECT
551	ENDDO
552	ENDIF
553
554	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
555	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
556	message_string = 'initializing_actions = "set_constant_profiles"' // &
557	' and "set_1d-model_profiles" are not allowed ' // &
558	'simultaneously'
559	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
560	ENDIF
561
562	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
563	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
564	message_string = 'initializing_actions = "set_constant_profiles"' // &
565	' and "by_user" are not allowed simultaneously'
566	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
567	ENDIF
568
569	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
570	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
571	message_string = 'initializing_actions = "by_user" and ' // &
572	'"set_1d-model_profiles" are not allowed simultaneously'
573	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
574	ENDIF
575
576	IF ( cloud_physics .AND. .NOT. humidity ) THEN
577	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
578	'not allowed with humidity = ', humidity
579	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
580	ENDIF
581
582	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
583	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
584	'not allowed with cloud_physics = ', cloud_physics
585	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
586	ENDIF
587
588	IF ( humidity .AND. sloping_surface ) THEN
589	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
590	'are not allowed simultaneously'
591	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
592	ENDIF
593
594	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
595	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
596	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
597	ENDIF
598
599	IF ( passive_scalar .AND. humidity ) THEN
600	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
601	'is not allowed simultaneously'
602	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
603	ENDIF
604
605	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
606	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
607	' = .TRUE.'
608	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
609	ENDIF
610
611	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
612	message_string = 'illegal value "' // TRIM( grid_matching ) // &
613	'" found for parameter grid_matching'
614	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
615	ENDIF
616
617	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
618	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
619	'coefficient & given value is drag_coefficient = 0.0'
620	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
621	ENDIF
622
623	!
624	!-- In case of no model continuation run, check initialising parameters and
625	!-- deduce further quantities
626	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
627
628	!
629	!-- Initial profiles for 1D and 3D model, respectively
630	u_init = ug_surface
631	v_init = vg_surface
632	pt_init = pt_surface
633	IF ( humidity ) q_init = q_surface
634	IF ( ocean ) sa_init = sa_surface
635	IF ( passive_scalar ) q_init = s_surface
636	IF ( plant_canopy ) lad = 0.0
637
638	!
639	!--
640	!-- If required, compute initial profile of the geostrophic wind
641	!-- (component ug)
642	i = 1
643	gradient = 0.0
644
645	IF ( .NOT. ocean ) THEN
646
647	ug_vertical_gradient_level_ind(1) = 0
648	ug(0) = ug_surface
649	DO k = 1, nzt+1
650	IF ( i < 11 ) THEN
651	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
652	ug_vertical_gradient_level(i) >= 0.0 ) THEN
653	gradient = ug_vertical_gradient(i) / 100.0
654	ug_vertical_gradient_level_ind(i) = k - 1
655	i = i + 1
656	ENDIF
657	ENDIF
658	IF ( gradient /= 0.0 ) THEN
659	IF ( k /= 1 ) THEN
660	ug(k) = ug(k-1) + dzu(k) * gradient
661	ELSE
662	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
663	ENDIF
664	ELSE
665	ug(k) = ug(k-1)
666	ENDIF
667	ENDDO
668
669	ELSE
670
671	ug_vertical_gradient_level_ind(1) = nzt+1
672	ug(nzt+1) = ug_surface
673	DO k = nzt, 0, -1
674	IF ( i < 11 ) THEN
675	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
676	ug_vertical_gradient_level(i) <= 0.0 ) THEN
677	gradient = ug_vertical_gradient(i) / 100.0
678	ug_vertical_gradient_level_ind(i) = k + 1
679	i = i + 1
680	ENDIF
681	ENDIF
682	IF ( gradient /= 0.0 ) THEN
683	IF ( k /= nzt ) THEN
684	ug(k) = ug(k+1) - dzu(k+1) * gradient
685	ELSE
686	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
687	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
688	ENDIF
689	ELSE
690	ug(k) = ug(k+1)
691	ENDIF
692	ENDDO
693
694	ENDIF
695
696	u_init = ug
697
698	!
699	!-- In case of no given gradients for ug, choose a vanishing gradient
700	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
701	ug_vertical_gradient_level(1) = 0.0
702	ENDIF
703
704	!
705	!--
706	!-- If required, compute initial profile of the geostrophic wind
707	!-- (component vg)
708	i = 1
709	gradient = 0.0
710
711	IF ( .NOT. ocean ) THEN
712
713	vg_vertical_gradient_level_ind(1) = 0
714	vg(0) = vg_surface
715	DO k = 1, nzt+1
716	IF ( i < 11 ) THEN
717	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
718	vg_vertical_gradient_level(i) >= 0.0 ) THEN
719	gradient = vg_vertical_gradient(i) / 100.0
720	vg_vertical_gradient_level_ind(i) = k - 1
721	i = i + 1
722	ENDIF
723	ENDIF
724	IF ( gradient /= 0.0 ) THEN
725	IF ( k /= 1 ) THEN
726	vg(k) = vg(k-1) + dzu(k) * gradient
727	ELSE
728	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
729	ENDIF
730	ELSE
731	vg(k) = vg(k-1)
732	ENDIF
733	ENDDO
734
735	ELSE
736
737	vg_vertical_gradient_level_ind(1) = nzt+1
738	vg(nzt+1) = vg_surface
739	DO k = nzt, 0, -1
740	IF ( i < 11 ) THEN
741	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
742	vg_vertical_gradient_level(i) <= 0.0 ) THEN
743	gradient = vg_vertical_gradient(i) / 100.0
744	vg_vertical_gradient_level_ind(i) = k + 1
745	i = i + 1
746	ENDIF
747	ENDIF
748	IF ( gradient /= 0.0 ) THEN
749	IF ( k /= nzt ) THEN
750	vg(k) = vg(k+1) - dzu(k+1) * gradient
751	ELSE
752	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
753	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
754	ENDIF
755	ELSE
756	vg(k) = vg(k+1)
757	ENDIF
758	ENDDO
759
760	ENDIF
761
762	v_init = vg
763
764	!
765	!-- In case of no given gradients for vg, choose a vanishing gradient
766	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
767	vg_vertical_gradient_level(1) = 0.0
768	ENDIF
769
770	!
771	!-- Compute initial temperature profile using the given temperature gradients
772	i = 1
773	gradient = 0.0
774
775	IF ( .NOT. ocean ) THEN
776
777	pt_vertical_gradient_level_ind(1) = 0
778	DO k = 1, nzt+1
779	IF ( i < 11 ) THEN
780	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
781	pt_vertical_gradient_level(i) >= 0.0 ) THEN
782	gradient = pt_vertical_gradient(i) / 100.0
783	pt_vertical_gradient_level_ind(i) = k - 1
784	i = i + 1
785	ENDIF
786	ENDIF
787	IF ( gradient /= 0.0 ) THEN
788	IF ( k /= 1 ) THEN
789	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
790	ELSE
791	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
792	ENDIF
793	ELSE
794	pt_init(k) = pt_init(k-1)
795	ENDIF
796	ENDDO
797
798	ELSE
799
800	pt_vertical_gradient_level_ind(1) = nzt+1
801	DO k = nzt, 0, -1
802	IF ( i < 11 ) THEN
803	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
804	pt_vertical_gradient_level(i) <= 0.0 ) THEN
805	gradient = pt_vertical_gradient(i) / 100.0
806	pt_vertical_gradient_level_ind(i) = k + 1
807	i = i + 1
808	ENDIF
809	ENDIF
810	IF ( gradient /= 0.0 ) THEN
811	IF ( k /= nzt ) THEN
812	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
813	ELSE
814	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
815	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
816	ENDIF
817	ELSE
818	pt_init(k) = pt_init(k+1)
819	ENDIF
820	ENDDO
821
822	ENDIF
823
824	!
825	!-- In case of no given temperature gradients, choose gradient of neutral
826	!-- stratification
827	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
828	pt_vertical_gradient_level(1) = 0.0
829	ENDIF
830
831	!
832	!-- Store temperature gradient at the top boundary for possible Neumann
833	!-- boundary condition
834	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
835
836	!
837	!-- If required, compute initial humidity or scalar profile using the given
838	!-- humidity/scalar gradient. In case of scalar transport, initially store
839	!-- values of the scalar parameters on humidity parameters
840	IF ( passive_scalar ) THEN
841	bc_q_b = bc_s_b
842	bc_q_t = bc_s_t
843	q_surface = s_surface
844	q_surface_initial_change = s_surface_initial_change
845	q_vertical_gradient = s_vertical_gradient
846	q_vertical_gradient_level = s_vertical_gradient_level
847	surface_waterflux = surface_scalarflux
848	ENDIF
849
850	IF ( humidity .OR. passive_scalar ) THEN
851
852	i = 1
853	gradient = 0.0
854	q_vertical_gradient_level_ind(1) = 0
855	DO k = 1, nzt+1
856	IF ( i < 11 ) THEN
857	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
858	q_vertical_gradient_level(i) >= 0.0 ) THEN
859	gradient = q_vertical_gradient(i) / 100.0
860	q_vertical_gradient_level_ind(i) = k - 1
861	i = i + 1
862	ENDIF
863	ENDIF
864	IF ( gradient /= 0.0 ) THEN
865	IF ( k /= 1 ) THEN
866	q_init(k) = q_init(k-1) + dzu(k) * gradient
867	ELSE
868	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
869	ENDIF
870	ELSE
871	q_init(k) = q_init(k-1)
872	ENDIF
873	!
874	!-- Avoid negative humidities
875	IF ( q_init(k) < 0.0 ) THEN
876	q_init(k) = 0.0
877	ENDIF
878	ENDDO
879
880	!
881	!-- In case of no given humidity gradients, choose zero gradient
882	!-- conditions
883	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
884	q_vertical_gradient_level(1) = 0.0
885	ENDIF
886
887	!
888	!-- Store humidity gradient at the top boundary for possile Neumann
889	!-- boundary condition
890	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
891
892	ENDIF
893
894	!
895	!-- If required, compute initial salinity profile using the given salinity
896	!-- gradients
897	IF ( ocean ) THEN
898
899	i = 1
900	gradient = 0.0
901
902	sa_vertical_gradient_level_ind(1) = nzt+1
903	DO k = nzt, 0, -1
904	IF ( i < 11 ) THEN
905	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
906	sa_vertical_gradient_level(i) <= 0.0 ) THEN
907	gradient = sa_vertical_gradient(i) / 100.0
908	sa_vertical_gradient_level_ind(i) = k + 1
909	i = i + 1
910	ENDIF
911	ENDIF
912	IF ( gradient /= 0.0 ) THEN
913	IF ( k /= nzt ) THEN
914	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
915	ELSE
916	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
917	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
918	ENDIF
919	ELSE
920	sa_init(k) = sa_init(k+1)
921	ENDIF
922	ENDDO
923
924	ENDIF
925
926	!
927	!-- If required compute the profile of leaf area density used in the plant canopy model
928	IF ( plant_canopy ) THEN
929
930	i = 1
931	gradient = 0.0
932
933	IF ( .NOT. ocean ) THEN
934
935	lad(0) = lad_surface
936
937	lad_vertical_gradient_level_ind(1) = 0
938	DO k = 1, pch_index
939	IF ( i < 11 ) THEN
940	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
941	lad_vertical_gradient_level(i) >= 0.0 ) THEN
942	gradient = lad_vertical_gradient(i)
943	lad_vertical_gradient_level_ind(i) = k - 1
944	i = i + 1
945	ENDIF
946	ENDIF
947	IF ( gradient /= 0.0 ) THEN
948	IF ( k /= 1 ) THEN
949	lad(k) = lad(k-1) + dzu(k) * gradient
950	ELSE
951	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
952	ENDIF
953	ELSE
954	lad(k) = lad(k-1)
955	ENDIF
956	ENDDO
957
958	ENDIF
959
960	!
961	!-- In case of no given leaf area density gradients, choose a vanishing gradient
962	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
963	lad_vertical_gradient_level(1) = 0.0
964	ENDIF
965
966	ENDIF
967
968	ENDIF
969
970	!
971	!-- Compute Coriolis parameter
972	f = 2.0 * omega * SIN( phi / 180.0 * pi )
973	fs = 2.0 * omega * COS( phi / 180.0 * pi )
974
975	!
976	!-- Ocean runs always use reference values in the buoyancy term. Therefore
977	!-- set the reference temperature equal to the surface temperature.
978	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
979
980	!
981	!-- Reference value has to be used in buoyancy terms
982	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
983
984	!
985	!-- Sign of buoyancy/stability terms
986	IF ( ocean ) atmos_ocean_sign = -1.0
987
988	!
989	!-- Ocean version must use flux boundary conditions at the top
990	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
991	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
992	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
993	ENDIF
994
995	!
996	!-- In case of a given slope, compute the relevant quantities
997	IF ( alpha_surface /= 0.0 ) THEN
998	IF ( ABS( alpha_surface ) > 90.0 ) THEN
999	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
1000	' ) must be < 90.0'
1001	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
1002	ENDIF
1003	sloping_surface = .TRUE.
1004	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
1005	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
1006	ENDIF
1007
1008	!
1009	!-- Check time step and cfl_factor
1010	IF ( dt /= -1.0 ) THEN
1011	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
1012	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
1013	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
1014	ENDIF
1015	dt_3d = dt
1016	dt_fixed = .TRUE.
1017	ENDIF
1018
1019	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1020	IF ( cfl_factor == -1.0 ) THEN
1021	IF ( momentum_advec == 'ups-scheme' .OR. &
1022	scalar_advec == 'ups-scheme' ) THEN
1023	cfl_factor = 0.8
1024	ELSE
1025	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1026	cfl_factor = 0.8
1027	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1028	cfl_factor = 0.9
1029	ELSE
1030	cfl_factor = 0.1
1031	ENDIF
1032	ENDIF
1033	ELSE
1034	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1035	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1036	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1037	ENDIF
1038	ENDIF
1039
1040	!
1041	!-- Store simulated time at begin
1042	simulated_time_at_begin = simulated_time
1043
1044	!
1045	!-- Store reference time for coupled runs and change the coupling flag,
1046	!-- if ...
1047	IF ( simulated_time == 0.0 ) THEN
1048	IF ( coupling_start_time == 0.0 ) THEN
1049	time_since_reference_point = 0.0
1050	ELSEIF ( time_since_reference_point < 0.0 ) THEN
1051	run_coupled = .FALSE.
1052	ENDIF
1053	ENDIF
1054
1055	!
1056	!-- Set wind speed in the Galilei-transformed system
1057	IF ( galilei_transformation ) THEN
1058	IF ( use_ug_for_galilei_tr .AND. &
1059	ug_vertical_gradient_level(1) == 0.0 .AND. &
1060	vg_vertical_gradient_level(1) == 0.0 ) THEN
1061	u_gtrans = ug_surface
1062	v_gtrans = vg_surface
1063	ELSEIF ( use_ug_for_galilei_tr .AND. &
1064	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1065	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1066	' with galilei transformation'
1067	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1068	ELSEIF ( use_ug_for_galilei_tr .AND. &
1069	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1070	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1071	' with galilei transformation'
1072	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1073	ELSE
1074	message_string = 'variable translation speed used for galilei-' // &
1075	'transformation, which may cause & instabilities in stably ' // &
1076	'stratified regions'
1077	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1078	ENDIF
1079	ENDIF
1080
1081	!
1082	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1083	!-- fluxes have to be used in the diffusion-terms
1084	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1085
1086	!
1087	!-- Check boundary conditions and set internal variables:
1088	!-- Lateral boundary conditions
1089	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1090	bc_lr /= 'radiation/dirichlet' ) THEN
1091	message_string = 'unknown boundary condition: bc_lr = "' // &
1092	TRIM( bc_lr ) // '"'
1093	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1094	ENDIF
1095	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1096	bc_ns /= 'radiation/dirichlet' ) THEN
1097	message_string = 'unknown boundary condition: bc_ns = "' // &
1098	TRIM( bc_ns ) // '"'
1099	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1100	ENDIF
1101
1102	!
1103	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1104	!-- Willimas advection scheme. Several schemes and tools do not work with
1105	!-- non-cyclic boundary conditions.
1106	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1107	IF ( psolver /= 'multigrid' ) THEN
1108	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1109	'psolver = "' // TRIM( psolver ) // '"'
1110	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1111	ENDIF
1112	IF ( momentum_advec /= 'pw-scheme' ) THEN
1113	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1114	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1115	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1116	ENDIF
1117	IF ( scalar_advec /= 'pw-scheme' ) THEN
1118	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1119	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1120	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1121	ENDIF
1122	IF ( galilei_transformation ) THEN
1123	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1124	'galilei_transformation = .T.'
1125	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1126	ENDIF
1127	ENDIF
1128
1129	!
1130	!-- Bottom boundary condition for the turbulent Kinetic energy
1131	IF ( bc_e_b == 'neumann' ) THEN
1132	ibc_e_b = 1
1133	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1134	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1135	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1136	ENDIF
1137	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1138	ibc_e_b = 2
1139	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1140	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1141	TRIM( bc_e_b ) // '"'
1142	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1143	ENDIF
1144	IF ( .NOT. prandtl_layer ) THEN
1145	bc_e_b = 'neumann'
1146	ibc_e_b = 1
1147	message_string = 'boundary condition bc_e_b changed to "' // &
1148	TRIM( bc_e_b ) // '"'
1149	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1150	ENDIF
1151	ELSE
1152	message_string = 'unknown boundary condition: bc_e_b = "' // &
1153	TRIM( bc_e_b ) // '"'
1154	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1155	ENDIF
1156
1157	!
1158	!-- Boundary conditions for perturbation pressure
1159	IF ( bc_p_b == 'dirichlet' ) THEN
1160	ibc_p_b = 0
1161	ELSEIF ( bc_p_b == 'neumann' ) THEN
1162	ibc_p_b = 1
1163	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1164	ibc_p_b = 2
1165	ELSE
1166	message_string = 'unknown boundary condition: bc_p_b = "' // &
1167	TRIM( bc_p_b ) // '"'
1168	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1169	ENDIF
1170	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1171	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1172	'" not allowed with prandtl_layer = .FALSE.'
1173	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1174	ENDIF
1175	IF ( bc_p_t == 'dirichlet' ) THEN
1176	ibc_p_t = 0
1177	ELSEIF ( bc_p_t == 'neumann' ) THEN
1178	ibc_p_t = 1
1179	ELSE
1180	message_string = 'unknown boundary condition: bc_p_t = "' // &
1181	TRIM( bc_p_t ) // '"'
1182	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1183	ENDIF
1184
1185	!
1186	!-- Boundary conditions for potential temperature
1187	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1188	ibc_pt_b = 2
1189	ELSE
1190	IF ( bc_pt_b == 'dirichlet' ) THEN
1191	ibc_pt_b = 0
1192	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1193	ibc_pt_b = 1
1194	ELSE
1195	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1196	TRIM( bc_pt_b ) // '"'
1197	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1198	ENDIF
1199	ENDIF
1200
1201	IF ( bc_pt_t == 'dirichlet' ) THEN
1202	ibc_pt_t = 0
1203	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1204	ibc_pt_t = 1
1205	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1206	ibc_pt_t = 2
1207	ELSE
1208	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1209	TRIM( bc_pt_t ) // '"'
1210	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1211	ENDIF
1212
1213	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1214	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1215	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1216	top_momentumflux_v /= 9999999.9 ) THEN
1217	constant_top_momentumflux = .TRUE.
1218	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1219	top_momentumflux_v == 9999999.9 ) ) THEN
1220	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1221	'must be set'
1222	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1223	ENDIF
1224
1225	!
1226	!-- A given surface temperature implies Dirichlet boundary condition for
1227	!-- temperature. In this case specification of a constant heat flux is
1228	!-- forbidden.
1229	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1230	surface_heatflux /= 0.0 ) THEN
1231	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1232	'& is not allowed with constant_heatflux = .TRUE.'
1233	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1234	ENDIF
1235	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1236	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1237	'wed with pt_surface_initial_change (/=0) = ', &
1238	pt_surface_initial_change
1239	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1240	ENDIF
1241
1242	!
1243	!-- A given temperature at the top implies Dirichlet boundary condition for
1244	!-- temperature. In this case specification of a constant heat flux is
1245	!-- forbidden.
1246	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1247	top_heatflux /= 0.0 ) THEN
1248	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1249	'" is not allowed with constant_top_heatflux = .TRUE.'
1250	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1251	ENDIF
1252
1253	!
1254	!-- Boundary conditions for salinity
1255	IF ( ocean ) THEN
1256	IF ( bc_sa_t == 'dirichlet' ) THEN
1257	ibc_sa_t = 0
1258	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1259	ibc_sa_t = 1
1260	ELSE
1261	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1262	TRIM( bc_sa_t ) // '"'
1263	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1264	ENDIF
1265
1266	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1267	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1268	message_string = 'boundary condition: bc_sa_t = "' // &
1269	TRIM( bc_sa_t ) // '" requires to set ' // &
1270	'top_salinityflux'
1271	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1272	ENDIF
1273
1274	!
1275	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1276	!-- salinity. In this case specification of a constant salinity flux is
1277	!-- forbidden.
1278	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1279	top_salinityflux /= 0.0 ) THEN
1280	message_string = 'boundary condition: bc_sa_t = "' // &
1281	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1282	'constant_top_salinityflux = .TRUE.'
1283	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1284	ENDIF
1285
1286	ENDIF
1287
1288	!
1289	!-- In case of humidity or passive scalar, set boundary conditions for total
1290	!-- water content / scalar
1291	IF ( humidity .OR. passive_scalar ) THEN
1292	IF ( humidity ) THEN
1293	sq = 'q'
1294	ELSE
1295	sq = 's'
1296	ENDIF
1297	IF ( bc_q_b == 'dirichlet' ) THEN
1298	ibc_q_b = 0
1299	ELSEIF ( bc_q_b == 'neumann' ) THEN
1300	ibc_q_b = 1
1301	ELSE
1302	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1303	'_b ="' // TRIM( bc_q_b ) // '"'
1304	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1305	ENDIF
1306	IF ( bc_q_t == 'dirichlet' ) THEN
1307	ibc_q_t = 0
1308	ELSEIF ( bc_q_t == 'neumann' ) THEN
1309	ibc_q_t = 1
1310	ELSE
1311	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1312	'_t ="' // TRIM( bc_q_t ) // '"'
1313	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1314	ENDIF
1315
1316	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1317
1318	!
1319	!-- A given surface humidity implies Dirichlet boundary condition for
1320	!-- humidity. In this case specification of a constant water flux is
1321	!-- forbidden.
1322	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1323	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1324	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1325	'th prescribed surface flux'
1326	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1327	ENDIF
1328	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1329	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1330	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1331	q_surface_initial_change
1332	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1333	ENDIF
1334
1335	ENDIF
1336
1337	!
1338	!-- Boundary conditions for horizontal components of wind speed
1339	IF ( bc_uv_b == 'dirichlet' ) THEN
1340	ibc_uv_b = 0
1341	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1342	ibc_uv_b = 1
1343	IF ( prandtl_layer ) THEN
1344	message_string = 'boundary condition: bc_uv_b = "' // &
1345	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1346	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1347	ENDIF
1348	ELSE
1349	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1350	TRIM( bc_uv_b ) // '"'
1351	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1352	ENDIF
1353
1354	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1355	bc_uv_t = 'neumann'
1356	ibc_uv_t = 1
1357	ELSE
1358	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1359	ibc_uv_t = 0
1360	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1361	ibc_uv_t = 1
1362	ELSE
1363	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1364	TRIM( bc_uv_t ) // '"'
1365	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1366	ENDIF
1367	ENDIF
1368
1369	!
1370	!-- Compute and check, respectively, the Rayleigh Damping parameter
1371	IF ( rayleigh_damping_factor == -1.0 ) THEN
1372	IF ( momentum_advec == 'ups-scheme' ) THEN
1373	rayleigh_damping_factor = 0.01
1374	ELSE
1375	rayleigh_damping_factor = 0.0
1376	ENDIF
1377	ELSE
1378	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1379	THEN
1380	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1381	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1382	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1383	ENDIF
1384	ENDIF
1385
1386	IF ( rayleigh_damping_height == -1.0 ) THEN
1387	IF ( .NOT. ocean ) THEN
1388	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1389	ELSE
1390	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1391	ENDIF
1392	ELSE
1393	IF ( .NOT. ocean ) THEN
1394	IF ( rayleigh_damping_height < 0.0 .OR. &
1395	rayleigh_damping_height > zu(nzt) ) THEN
1396	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1397	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1398	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1399	ENDIF
1400	ELSE
1401	IF ( rayleigh_damping_height > 0.0 .OR. &
1402	rayleigh_damping_height < zu(nzb) ) THEN
1403	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1404	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1405	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1406	ENDIF
1407	ENDIF
1408	ENDIF
1409
1410	!
1411	!-- Check limiters for Upstream-Spline scheme
1412	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1413	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1414	overshoot_limit_e < 0.0 ) THEN
1415	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1416	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1417	ENDIF
1418	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1419	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1420	message_string = 'ups_limit_... < 0.0 is not allowed'
1421	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1422	ENDIF
1423
1424	!
1425	!-- Check number of chosen statistic regions. More than 10 regions are not
1426	!-- allowed, because so far no more than 10 corresponding output files can
1427	!-- be opened (cf. check_open)
1428	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1429	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1430	statistic_regions+1, ' but only 10 regions are allowed'
1431	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1432	ENDIF
1433	IF ( normalizing_region > statistic_regions .OR. &
1434	normalizing_region < 0) THEN
1435	WRITE ( message_string, * ) 'normalizing_region = ', &
1436	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1437	' (value of statistic_regions)'
1438	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1439	ENDIF
1440
1441	!
1442	!-- Check the interval for sorting particles.
1443	!-- Using particles as cloud droplets requires sorting after each timestep.
1444	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1445	dt_sort_particles = 0.0
1446	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1447	'_droplets = .TRUE.'
1448	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1449	ENDIF
1450
1451	!
1452	!-- Set the default intervals for data output, if necessary
1453	!-- NOTE: dt_dosp has already been set in package_parin
1454	IF ( dt_data_output /= 9999999.9 ) THEN
1455	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1456	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1457	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1458	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1459	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1460	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1461	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1462	ENDIF
1463
1464	!
1465	!-- Set the default skip time intervals for data output, if necessary
1466	IF ( skip_time_dopr == 9999999.9 ) &
1467	skip_time_dopr = skip_time_data_output
1468	IF ( skip_time_dosp == 9999999.9 ) &
1469	skip_time_dosp = skip_time_data_output
1470	IF ( skip_time_do2d_xy == 9999999.9 ) &
1471	skip_time_do2d_xy = skip_time_data_output
1472	IF ( skip_time_do2d_xz == 9999999.9 ) &
1473	skip_time_do2d_xz = skip_time_data_output
1474	IF ( skip_time_do2d_yz == 9999999.9 ) &
1475	skip_time_do2d_yz = skip_time_data_output
1476	IF ( skip_time_do3d == 9999999.9 ) &
1477	skip_time_do3d = skip_time_data_output
1478	IF ( skip_time_data_output_av == 9999999.9 ) &
1479	skip_time_data_output_av = skip_time_data_output
1480
1481	!
1482	!-- Check the average intervals (first for 3d-data, then for profiles and
1483	!-- spectra)
1484	IF ( averaging_interval > dt_data_output_av ) THEN
1485	WRITE( message_string, * ) 'averaging_interval = ', &
1486	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1487	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1488	ENDIF
1489
1490	IF ( averaging_interval_pr == 9999999.9 ) THEN
1491	averaging_interval_pr = averaging_interval
1492	ENDIF
1493
1494	IF ( averaging_interval_pr > dt_dopr ) THEN
1495	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1496	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1497	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1498	ENDIF
1499
1500	IF ( averaging_interval_sp == 9999999.9 ) THEN
1501	averaging_interval_sp = averaging_interval
1502	ENDIF
1503
1504	IF ( averaging_interval_sp > dt_dosp ) THEN
1505	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1506	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1507	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1508	ENDIF
1509
1510	!
1511	!-- Set the default interval for profiles entering the temporal average
1512	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1513	dt_averaging_input_pr = dt_averaging_input
1514	ENDIF
1515
1516	!
1517	!-- Set the default interval for the output of timeseries to a reasonable
1518	!-- value (tries to minimize the number of calls of flow_statistics)
1519	IF ( dt_dots == 9999999.9 ) THEN
1520	IF ( averaging_interval_pr == 0.0 ) THEN
1521	dt_dots = MIN( dt_run_control, dt_dopr )
1522	ELSE
1523	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1524	ENDIF
1525	ENDIF
1526
1527	!
1528	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1529	IF ( dt_averaging_input > averaging_interval ) THEN
1530	WRITE( message_string, * ) 'dt_averaging_input = ', &
1531	dt_averaging_input, ' must be <= averaging_interval = ', &
1532	averaging_interval
1533	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1534	ENDIF
1535
1536	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1537	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1538	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1539	averaging_interval_pr
1540	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1541	ENDIF
1542
1543	!
1544	!-- Set the default value for the integration interval of precipitation amount
1545	IF ( precipitation ) THEN
1546	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1547	precipitation_amount_interval = dt_do2d_xy
1548	ELSE
1549	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1550	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1551	precipitation_amount_interval, ' must not be larger than ', &
1552	'dt_do2d_xy = ', dt_do2d_xy
1553	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1554	ENDIF
1555	ENDIF
1556	ENDIF
1557
1558	!
1559	!-- Determine the number of output profiles and check whether they are
1560	!-- permissible
1561	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1562
1563	dopr_n = dopr_n + 1
1564	i = dopr_n
1565
1566	!
1567	!-- Determine internal profile number (for hom, homs)
1568	!-- and store height levels
1569	SELECT CASE ( TRIM( data_output_pr(i) ) )
1570
1571	CASE ( 'u', '#u' )
1572	dopr_index(i) = 1
1573	dopr_unit(i) = 'm/s'
1574	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1575	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1576	dopr_initial_index(i) = 5
1577	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1578	data_output_pr(i) = data_output_pr(i)(2:)
1579	ENDIF
1580
1581	CASE ( 'v', '#v' )
1582	dopr_index(i) = 2
1583	dopr_unit(i) = 'm/s'
1584	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1585	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1586	dopr_initial_index(i) = 6
1587	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1588	data_output_pr(i) = data_output_pr(i)(2:)
1589	ENDIF
1590
1591	CASE ( 'w' )
1592	dopr_index(i) = 3
1593	dopr_unit(i) = 'm/s'
1594	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1595
1596	CASE ( 'pt', '#pt' )
1597	IF ( .NOT. cloud_physics ) THEN
1598	dopr_index(i) = 4
1599	dopr_unit(i) = 'K'
1600	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1601	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1602	dopr_initial_index(i) = 7
1603	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1604	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1605	data_output_pr(i) = data_output_pr(i)(2:)
1606	ENDIF
1607	ELSE
1608	dopr_index(i) = 43
1609	dopr_unit(i) = 'K'
1610	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1611	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1612	dopr_initial_index(i) = 28
1613	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1614	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1615	data_output_pr(i) = data_output_pr(i)(2:)
1616	ENDIF
1617	ENDIF
1618
1619	CASE ( 'e' )
1620	dopr_index(i) = 8
1621	dopr_unit(i) = 'm2/s2'
1622	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1623	hom(nzb,2,8,:) = 0.0
1624
1625	CASE ( 'km', '#km' )
1626	dopr_index(i) = 9
1627	dopr_unit(i) = 'm2/s'
1628	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1629	hom(nzb,2,9,:) = 0.0
1630	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1631	dopr_initial_index(i) = 23
1632	hom(:,2,23,:) = hom(:,2,9,:)
1633	data_output_pr(i) = data_output_pr(i)(2:)
1634	ENDIF
1635
1636	CASE ( 'kh', '#kh' )
1637	dopr_index(i) = 10
1638	dopr_unit(i) = 'm2/s'
1639	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1640	hom(nzb,2,10,:) = 0.0
1641	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1642	dopr_initial_index(i) = 24
1643	hom(:,2,24,:) = hom(:,2,10,:)
1644	data_output_pr(i) = data_output_pr(i)(2:)
1645	ENDIF
1646
1647	CASE ( 'l', '#l' )
1648	dopr_index(i) = 11
1649	dopr_unit(i) = 'm'
1650	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1651	hom(nzb,2,11,:) = 0.0
1652	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1653	dopr_initial_index(i) = 25
1654	hom(:,2,25,:) = hom(:,2,11,:)
1655	data_output_pr(i) = data_output_pr(i)(2:)
1656	ENDIF
1657
1658	CASE ( 'w"u"' )
1659	dopr_index(i) = 12
1660	dopr_unit(i) = 'm2/s2'
1661	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1662	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1663
1664	CASE ( 'wu' )
1665	dopr_index(i) = 13
1666	dopr_unit(i) = 'm2/s2'
1667	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1668
1669	CASE ( 'w"v"' )
1670	dopr_index(i) = 14
1671	dopr_unit(i) = 'm2/s2'
1672	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1673	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1674
1675	CASE ( 'wv' )
1676	dopr_index(i) = 15
1677	dopr_unit(i) = 'm2/s2'
1678	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1679
1680	CASE ( 'w"pt"' )
1681	dopr_index(i) = 16
1682	dopr_unit(i) = 'K m/s'
1683	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1684
1685	CASE ( 'wpt' )
1686	dopr_index(i) = 17
1687	dopr_unit(i) = 'K m/s'
1688	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1689
1690	CASE ( 'wpt' )
1691	dopr_index(i) = 18
1692	dopr_unit(i) = 'K m/s'
1693	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1694
1695	CASE ( 'wu' )
1696	dopr_index(i) = 19
1697	dopr_unit(i) = 'm2/s2'
1698	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1699	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1700
1701	CASE ( 'wv' )
1702	dopr_index(i) = 20
1703	dopr_unit(i) = 'm2/s2'
1704	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1705	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1706
1707	CASE ( 'wptBC' )
1708	dopr_index(i) = 21
1709	dopr_unit(i) = 'K m/s'
1710	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1711
1712	CASE ( 'wptBC' )
1713	dopr_index(i) = 22
1714	dopr_unit(i) = 'K m/s'
1715	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1716
1717	CASE ( 'sa', '#sa' )
1718	IF ( .NOT. ocean ) THEN
1719	message_string = 'data_output_pr = ' // &
1720	TRIM( data_output_pr(i) ) // ' is not imp' // &
1721	'lemented for ocean = .FALSE.'
1722	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1723	ELSE
1724	dopr_index(i) = 23
1725	dopr_unit(i) = 'psu'
1726	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1727	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1728	dopr_initial_index(i) = 26
1729	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1730	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1731	data_output_pr(i) = data_output_pr(i)(2:)
1732	ENDIF
1733	ENDIF
1734
1735	CASE ( 'u*2' )
1736	dopr_index(i) = 30
1737	dopr_unit(i) = 'm2/s2'
1738	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1739
1740	CASE ( 'v*2' )
1741	dopr_index(i) = 31
1742	dopr_unit(i) = 'm2/s2'
1743	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1744
1745	CASE ( 'w*2' )
1746	dopr_index(i) = 32
1747	dopr_unit(i) = 'm2/s2'
1748	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1749
1750	CASE ( 'pt*2' )
1751	dopr_index(i) = 33
1752	dopr_unit(i) = 'K2'
1753	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1754
1755	CASE ( 'e*' )
1756	dopr_index(i) = 34
1757	dopr_unit(i) = 'm2/s2'
1758	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1759
1760	CASE ( 'w2pt' )
1761	dopr_index(i) = 35
1762	dopr_unit(i) = 'K m2/s2'
1763	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1764
1765	CASE ( 'wpt2' )
1766	dopr_index(i) = 36
1767	dopr_unit(i) = 'K2 m/s'
1768	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1769
1770	CASE ( 'we' )
1771	dopr_index(i) = 37
1772	dopr_unit(i) = 'm3/s3'
1773	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1774
1775	CASE ( 'w*3' )
1776	dopr_index(i) = 38
1777	dopr_unit(i) = 'm3/s3'
1778	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1779
1780	CASE ( 'Sw' )
1781	dopr_index(i) = 39
1782	dopr_unit(i) = 'none'
1783	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1784
1785	CASE ( 'p' )
1786	dopr_index(i) = 40
1787	dopr_unit(i) = 'Pa'
1788	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1789
1790	CASE ( 'q', '#q' )
1791	IF ( .NOT. humidity ) THEN
1792	message_string = 'data_output_pr = ' // &
1793	TRIM( data_output_pr(i) ) // ' is not imp' // &
1794	'lemented for humidity = .FALSE.'
1795	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1796	ELSE
1797	dopr_index(i) = 41
1798	dopr_unit(i) = 'kg/kg'
1799	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1800	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1801	dopr_initial_index(i) = 26
1802	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1803	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1804	data_output_pr(i) = data_output_pr(i)(2:)
1805	ENDIF
1806	ENDIF
1807
1808	CASE ( 's', '#s' )
1809	IF ( .NOT. passive_scalar ) THEN
1810	message_string = 'data_output_pr = ' // &
1811	TRIM( data_output_pr(i) ) // ' is not imp' // &
1812	'lemented for passive_scalar = .FALSE.'
1813	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1814	ELSE
1815	dopr_index(i) = 41
1816	dopr_unit(i) = 'kg/m3'
1817	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1818	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1819	dopr_initial_index(i) = 26
1820	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1821	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1822	data_output_pr(i) = data_output_pr(i)(2:)
1823	ENDIF
1824	ENDIF
1825
1826	CASE ( 'qv', '#qv' )
1827	IF ( .NOT. cloud_physics ) THEN
1828	dopr_index(i) = 41
1829	dopr_unit(i) = 'kg/kg'
1830	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1831	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1832	dopr_initial_index(i) = 26
1833	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1834	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1835	data_output_pr(i) = data_output_pr(i)(2:)
1836	ENDIF
1837	ELSE
1838	dopr_index(i) = 42
1839	dopr_unit(i) = 'kg/kg'
1840	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1841	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1842	dopr_initial_index(i) = 27
1843	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1844	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1845	data_output_pr(i) = data_output_pr(i)(2:)
1846	ENDIF
1847	ENDIF
1848
1849	CASE ( 'lpt', '#lpt' )
1850	IF ( .NOT. cloud_physics ) THEN
1851	message_string = 'data_output_pr = ' // &
1852	TRIM( data_output_pr(i) ) // ' is not imp' // &
1853	'lemented for cloud_physics = .FALSE.'
1854	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1855	ELSE
1856	dopr_index(i) = 4
1857	dopr_unit(i) = 'K'
1858	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1859	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1860	dopr_initial_index(i) = 7
1861	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1862	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1863	data_output_pr(i) = data_output_pr(i)(2:)
1864	ENDIF
1865	ENDIF
1866
1867	CASE ( 'vpt', '#vpt' )
1868	dopr_index(i) = 44
1869	dopr_unit(i) = 'K'
1870	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1871	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1872	dopr_initial_index(i) = 29
1873	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1874	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1875	data_output_pr(i) = data_output_pr(i)(2:)
1876	ENDIF
1877
1878	CASE ( 'w"vpt"' )
1879	dopr_index(i) = 45
1880	dopr_unit(i) = 'K m/s'
1881	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1882
1883	CASE ( 'wvpt' )
1884	dopr_index(i) = 46
1885	dopr_unit(i) = 'K m/s'
1886	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1887
1888	CASE ( 'wvpt' )
1889	dopr_index(i) = 47
1890	dopr_unit(i) = 'K m/s'
1891	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1892
1893	CASE ( 'w"q"' )
1894	IF ( .NOT. humidity ) THEN
1895	message_string = 'data_output_pr = ' // &
1896	TRIM( data_output_pr(i) ) // ' is not imp' // &
1897	'lemented for humidity = .FALSE.'
1898	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1899	ELSE
1900	dopr_index(i) = 48
1901	dopr_unit(i) = 'kg/kg m/s'
1902	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1903	ENDIF
1904
1905	CASE ( 'wq' )
1906	IF ( .NOT. humidity ) THEN
1907	message_string = 'data_output_pr = ' // &
1908	TRIM( data_output_pr(i) ) // ' is not imp' // &
1909	'lemented for humidity = .FALSE.'
1910	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1911	ELSE
1912	dopr_index(i) = 49
1913	dopr_unit(i) = 'kg/kg m/s'
1914	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1915	ENDIF
1916
1917	CASE ( 'wq' )
1918	IF ( .NOT. humidity ) THEN
1919	message_string = 'data_output_pr = ' // &
1920	TRIM( data_output_pr(i) ) // ' is not imp' // &
1921	'lemented for humidity = .FALSE.'
1922	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1923	ELSE
1924	dopr_index(i) = 50
1925	dopr_unit(i) = 'kg/kg m/s'
1926	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1927	ENDIF
1928
1929	CASE ( 'w"s"' )
1930	IF ( .NOT. passive_scalar ) THEN
1931	message_string = 'data_output_pr = ' // &
1932	TRIM( data_output_pr(i) ) // ' is not imp' // &
1933	'lemented for passive_scalar = .FALSE.'
1934	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1935	ELSE
1936	dopr_index(i) = 48
1937	dopr_unit(i) = 'kg/m3 m/s'
1938	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1939	ENDIF
1940
1941	CASE ( 'ws' )
1942	IF ( .NOT. passive_scalar ) THEN
1943	message_string = 'data_output_pr = ' // &
1944	TRIM( data_output_pr(i) ) // ' is not imp' // &
1945	'lemented for passive_scalar = .FALSE.'
1946	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1947	ELSE
1948	dopr_index(i) = 49
1949	dopr_unit(i) = 'kg/m3 m/s'
1950	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1951	ENDIF
1952
1953	CASE ( 'ws' )
1954	IF ( .NOT. passive_scalar ) THEN
1955	message_string = 'data_output_pr = ' // &
1956	TRIM( data_output_pr(i) ) // ' is not imp' // &
1957	'lemented for passive_scalar = .FALSE.'
1958	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1959	ELSE
1960	dopr_index(i) = 50
1961	dopr_unit(i) = 'kg/m3 m/s'
1962	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1963	ENDIF
1964
1965	CASE ( 'w"qv"' )
1966	IF ( humidity .AND. .NOT. cloud_physics ) &
1967	THEN
1968	dopr_index(i) = 48
1969	dopr_unit(i) = 'kg/kg m/s'
1970	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1971	ELSEIF( humidity .AND. cloud_physics ) THEN
1972	dopr_index(i) = 51
1973	dopr_unit(i) = 'kg/kg m/s'
1974	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1975	ELSE
1976	message_string = 'data_output_pr = ' // &
1977	TRIM( data_output_pr(i) ) // ' is not imp' // &
1978	'lemented for cloud_physics = .FALSE. an&' // &
1979	'd humidity = .FALSE.'
1980	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1981	ENDIF
1982
1983	CASE ( 'wqv' )
1984	IF ( humidity .AND. .NOT. cloud_physics ) &
1985	THEN
1986	dopr_index(i) = 49
1987	dopr_unit(i) = 'kg/kg m/s'
1988	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1989	ELSEIF( humidity .AND. cloud_physics ) THEN
1990	dopr_index(i) = 52
1991	dopr_unit(i) = 'kg/kg m/s'
1992	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1993	ELSE
1994	message_string = 'data_output_pr = ' // &
1995	TRIM( data_output_pr(i) ) // ' is not imp' // &
1996	'lemented for cloud_physics = .FALSE. an&' // &
1997	'd humidity = .FALSE.'
1998	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1999	ENDIF
2000
2001	CASE ( 'wqv' )
2002	IF ( humidity .AND. .NOT. cloud_physics ) &
2003	THEN
2004	dopr_index(i) = 50
2005	dopr_unit(i) = 'kg/kg m/s'
2006	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
2007	ELSEIF( humidity .AND. cloud_physics ) THEN
2008	dopr_index(i) = 53
2009	dopr_unit(i) = 'kg/kg m/s'
2010	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
2011	ELSE
2012	message_string = 'data_output_pr = ' // &
2013	TRIM( data_output_pr(i) ) // ' is not imp' // &
2014	'lemented for cloud_physics = .FALSE. an&' // &
2015	'd humidity = .FALSE.'
2016	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
2017	ENDIF
2018
2019	CASE ( 'ql' )
2020	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
2021	message_string = 'data_output_pr = ' // &
2022	TRIM( data_output_pr(i) ) // ' is not imp' // &
2023	'lemented for cloud_physics = .FALSE. or' // &
2024	'&cloud_droplets = .FALSE.'
2025	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
2026	ELSE
2027	dopr_index(i) = 54
2028	dopr_unit(i) = 'kg/kg'
2029	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2030	ENDIF
2031
2032	CASE ( 'wuu*/dz' )
2033	dopr_index(i) = 55
2034	dopr_unit(i) = 'm2/s3'
2035	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2036
2037	CASE ( 'wp/dz' )
2038	dopr_index(i) = 56
2039	dopr_unit(i) = 'm2/s3'
2040	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2041
2042	CASE ( 'w"e/dz' )
2043	dopr_index(i) = 57
2044	dopr_unit(i) = 'm2/s3'
2045	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2046
2047	CASE ( 'u"pt"' )
2048	dopr_index(i) = 58
2049	dopr_unit(i) = 'K m/s'
2050	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2051
2052	CASE ( 'upt' )
2053	dopr_index(i) = 59
2054	dopr_unit(i) = 'K m/s'
2055	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2056
2057	CASE ( 'upt_t' )
2058	dopr_index(i) = 60
2059	dopr_unit(i) = 'K m/s'
2060	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2061
2062	CASE ( 'v"pt"' )
2063	dopr_index(i) = 61
2064	dopr_unit(i) = 'K m/s'
2065	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2066
2067	CASE ( 'vpt' )
2068	dopr_index(i) = 62
2069	dopr_unit(i) = 'K m/s'
2070	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2071
2072	CASE ( 'vpt_t' )
2073	dopr_index(i) = 63
2074	dopr_unit(i) = 'K m/s'
2075	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2076
2077	CASE ( 'rho' )
2078	dopr_index(i) = 64
2079	dopr_unit(i) = 'kg/m3'
2080	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2081
2082	CASE ( 'w"sa"' )
2083	IF ( .NOT. ocean ) THEN
2084	message_string = 'data_output_pr = ' // &
2085	TRIM( data_output_pr(i) ) // ' is not imp' // &
2086	'lemented for ocean = .FALSE.'
2087	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2088	ELSE
2089	dopr_index(i) = 65
2090	dopr_unit(i) = 'psu m/s'
2091	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2092	ENDIF
2093
2094	CASE ( 'wsa' )
2095	IF ( .NOT. ocean ) THEN
2096	message_string = 'data_output_pr = ' // &
2097	TRIM( data_output_pr(i) ) // ' is not imp' // &
2098	'lemented for ocean = .FALSE.'
2099	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2100	ELSE
2101	dopr_index(i) = 66
2102	dopr_unit(i) = 'psu m/s'
2103	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2104	ENDIF
2105
2106	CASE ( 'wsa' )
2107	IF ( .NOT. ocean ) THEN
2108	message_string = 'data_output_pr = ' // &
2109	TRIM( data_output_pr(i) ) // ' is not imp' // &
2110	'lemented for ocean = .FALSE.'
2111	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2112	ELSE
2113	dopr_index(i) = 67
2114	dopr_unit(i) = 'psu m/s'
2115	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2116	ENDIF
2117
2118	CASE ( 'wp' )
2119	dopr_index(i) = 68
2120	dopr_unit(i) = 'm3/s3'
2121	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2122
2123	CASE ( 'w"e' )
2124	dopr_index(i) = 69
2125	dopr_unit(i) = 'm3/s3'
2126	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2127
2128	CASE ( 'q*2' )
2129	IF ( .NOT. humidity ) THEN
2130	message_string = 'data_output_pr = ' // &
2131	TRIM( data_output_pr(i) ) // ' is not imp' // &
2132	'lemented for humidity = .FALSE.'
2133	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2134	ELSE
2135	dopr_index(i) = 70
2136	dopr_unit(i) = 'kg2/kg2'
2137	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2138	ENDIF
2139
2140	CASE DEFAULT
2141
2142	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2143
2144	IF ( unit == 'illegal' ) THEN
2145	IF ( data_output_pr_user(1) /= ' ' ) THEN
2146	message_string = 'illegal value for data_output_pr or ' // &
2147	'data_output_pr_user = "' // &
2148	TRIM( data_output_pr(i) ) // '"'
2149	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2150	ELSE
2151	message_string = 'illegal value for data_output_pr = "' // &
2152	TRIM( data_output_pr(i) ) // '"'
2153	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2154	ENDIF
2155	ENDIF
2156
2157	END SELECT
2158	!
2159	!-- Check to which of the predefined coordinate systems the profile belongs
2160	DO k = 1, crmax
2161	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2162	/=0 ) &
2163	THEN
2164	dopr_crossindex(i) = k
2165	EXIT
2166	ENDIF
2167	ENDDO
2168	!
2169	!-- Generate the text for the labels of the PROFIL output file. "-characters
2170	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2171	!-- control characters
2172	dopr_label(i) = data_output_pr(i)
2173	position = INDEX( dopr_label(i) , '"' )
2174	DO WHILE ( position /= 0 )
2175	dopr_label(i)(position:position) = ''''
2176	position = INDEX( dopr_label(i) , '"' )
2177	ENDDO
2178
2179	ENDDO
2180
2181	!
2182	!-- y-value range of the coordinate system (PROFIL).
2183	!-- x-value range determined in plot_1d.
2184	IF ( .NOT. ocean ) THEN
2185	cross_uymin = 0.0
2186	IF ( z_max_do1d == -1.0 ) THEN
2187	cross_uymax = zu(nzt+1)
2188	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2189	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2190	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2191	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2192	ELSE
2193	cross_uymax = z_max_do1d
2194	ENDIF
2195	ENDIF
2196
2197	!
2198	!-- Check whether the chosen normalizing factor for the coordinate systems is
2199	!-- permissible
2200	DO i = 1, crmax
2201	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2202
2203	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2204	j = 0
2205
2206	CASE DEFAULT
2207	message_string = 'unknown normalization method cross_normali' // &
2208	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2209	'"'
2210	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2211
2212	END SELECT
2213	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2214
2215	CASE ( '', 'z_i' )
2216	j = 0
2217
2218	CASE DEFAULT
2219	message_string = 'unknown normalization method cross_normali' // &
2220	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2221	'"'
2222	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2223
2224	END SELECT
2225	ENDDO
2226	!
2227	!-- Check normalized y-value range of the coordinate system (PROFIL)
2228	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2229	THEN
2230	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2231	z_max_do1d_normalized, ' must be >= 0.0'
2232	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2233	ENDIF
2234
2235
2236	!
2237	!-- Append user-defined data output variables to the standard data output
2238	IF ( data_output_user(1) /= ' ' ) THEN
2239	i = 1
2240	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2241	i = i + 1
2242	ENDDO
2243	j = 1
2244	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2245	IF ( i > 100 ) THEN
2246	message_string = 'number of output quantitities given by data' // &
2247	'_output and data_output_user exceeds the limit of 100'
2248	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2249	ENDIF
2250	data_output(i) = data_output_user(j)
2251	i = i + 1
2252	j = j + 1
2253	ENDDO
2254	ENDIF
2255
2256	!
2257	!-- Check and set steering parameters for 2d/3d data output and averaging
2258	i = 1
2259	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2260	!
2261	!-- Check for data averaging
2262	ilen = LEN_TRIM( data_output(i) )
2263	j = 0 ! no data averaging
2264	IF ( ilen > 3 ) THEN
2265	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2266	j = 1 ! data averaging
2267	data_output(i) = data_output(i)(1:ilen-3)
2268	ENDIF
2269	ENDIF
2270	!
2271	!-- Check for cross section or volume data
2272	ilen = LEN_TRIM( data_output(i) )
2273	k = 0 ! 3d data
2274	var = data_output(i)(1:ilen)
2275	IF ( ilen > 3 ) THEN
2276	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2277	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2278	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2279	k = 1 ! 2d data
2280	var = data_output(i)(1:ilen-3)
2281	ENDIF
2282	ENDIF
2283	!
2284	!-- Check for allowed value and set units
2285	SELECT CASE ( TRIM( var ) )
2286
2287	CASE ( 'e' )
2288	IF ( constant_diffusion ) THEN
2289	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2290	'res constant_diffusion = .FALSE.'
2291	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2292	ENDIF
2293	unit = 'm2/s2'
2294
2295	CASE ( 'pc', 'pr' )
2296	IF ( .NOT. particle_advection ) THEN
2297	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2298	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2299	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2300	ENDIF
2301	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2302	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2303
2304	CASE ( 'q', 'vpt' )
2305	IF ( .NOT. humidity ) THEN
2306	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2307	'res humidity = .TRUE.'
2308	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2309	ENDIF
2310	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2311	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2312
2313	CASE ( 'ql' )
2314	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2315	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2316	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2317	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2318	ENDIF
2319	unit = 'kg/kg'
2320
2321	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2322	IF ( .NOT. cloud_droplets ) THEN
2323	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2324	'res cloud_droplets = .TRUE.'
2325	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2326	ENDIF
2327	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2328	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2329	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2330
2331	CASE ( 'qv' )
2332	IF ( .NOT. cloud_physics ) THEN
2333	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2334	'res cloud_physics = .TRUE.'
2335	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2336	ENDIF
2337	unit = 'kg/kg'
2338
2339	CASE ( 'rho' )
2340	IF ( .NOT. ocean ) THEN
2341	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2342	'res ocean = .TRUE.'
2343	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2344	ENDIF
2345	unit = 'kg/m3'
2346
2347	CASE ( 's' )
2348	IF ( .NOT. passive_scalar ) THEN
2349	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2350	'res passive_scalar = .TRUE.'
2351	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2352	ENDIF
2353	unit = 'conc'
2354
2355	CASE ( 'sa' )
2356	IF ( .NOT. ocean ) THEN
2357	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2358	'res ocean = .TRUE.'
2359	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2360	ENDIF
2361	unit = 'psu'
2362
2363	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2364	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2365	message_string = 'illegal value for data_output: "' // &
2366	TRIM( var ) // '" & only 2d-horizontal ' // &
2367	'cross sections are allowed for this value'
2368	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2369	ENDIF
2370	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2371	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2372	'res cloud_physics = .TRUE.'
2373	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2374	ENDIF
2375	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2376	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2377	'res precipitation = .TRUE.'
2378	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2379	ENDIF
2380	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2381	message_string = 'temporal averaging of precipitation ' // &
2382	'amount "' // TRIM( var ) // '" is not possible'
2383	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2384	ENDIF
2385	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2386	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2387	'res precipitation = .TRUE.'
2388	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2389	ENDIF
2390
2391
2392	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2393	IF ( TRIM( var ) == 't*' ) unit = 'K'
2394	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2395	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2396	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2397	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2398
2399	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2400	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2401	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2402	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2403	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2404	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2405	CONTINUE
2406
2407	CASE DEFAULT
2408	CALL user_check_data_output( var, unit )
2409
2410	IF ( unit == 'illegal' ) THEN
2411	IF ( data_output_user(1) /= ' ' ) THEN
2412	message_string = 'illegal value for data_output or ' // &
2413	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2414	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2415	ELSE
2416	message_string = 'illegal value for data_output =' // &
2417	TRIM( data_output(i) ) // '"'
2418	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2419	ENDIF
2420	ENDIF
2421
2422	END SELECT
2423	!
2424	!-- Set the internal steering parameters appropriately
2425	IF ( k == 0 ) THEN
2426	do3d_no(j) = do3d_no(j) + 1
2427	do3d(j,do3d_no(j)) = data_output(i)
2428	do3d_unit(j,do3d_no(j)) = unit
2429	ELSE
2430	do2d_no(j) = do2d_no(j) + 1
2431	do2d(j,do2d_no(j)) = data_output(i)
2432	do2d_unit(j,do2d_no(j)) = unit
2433	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2434	data_output_xy(j) = .TRUE.
2435	ENDIF
2436	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2437	data_output_xz(j) = .TRUE.
2438	ENDIF
2439	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2440	data_output_yz(j) = .TRUE.
2441	ENDIF
2442	ENDIF
2443
2444	IF ( j == 1 ) THEN
2445	!
2446	!-- Check, if variable is already subject to averaging
2447	found = .FALSE.
2448	DO k = 1, doav_n
2449	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2450	ENDDO
2451
2452	IF ( .NOT. found ) THEN
2453	doav_n = doav_n + 1
2454	doav(doav_n) = var
2455	ENDIF
2456	ENDIF
2457
2458	i = i + 1
2459	ENDDO
2460
2461	!
2462	!-- Check sectional planes and store them in one shared array
2463	IF ( ANY( section_xy > nz + 1 ) ) THEN
2464	WRITE( message_string, * ) 'section_xy must be <= nz + 1 = ', nz + 1
2465	CALL message( 'check_parameters', 'PA0319', 1, 2, 0, 6, 0 )
2466	ENDIF
2467	IF ( ANY( section_xz > ny + 1 ) ) THEN
2468	WRITE( message_string, * ) 'section_xz must be <= ny + 1 = ', ny + 1
2469	CALL message( 'check_parameters', 'PA0320', 1, 2, 0, 6, 0 )
2470	ENDIF
2471	IF ( ANY( section_yz > nx + 1 ) ) THEN
2472	WRITE( message_string, * ) 'section_yz must be <= nx + 1 = ', nx + 1
2473	CALL message( 'check_parameters', 'PA0321', 1, 2, 0, 6, 0 )
2474	ENDIF
2475	section(:,1) = section_xy
2476	section(:,2) = section_xz
2477	section(:,3) = section_yz
2478
2479	!
2480	!-- Upper plot limit (grid point value) for 1D profiles
2481	IF ( z_max_do1d == -1.0 ) THEN
2482	nz_do1d = nzt+1
2483	ELSE
2484	DO k = nzb+1, nzt+1
2485	nz_do1d = k
2486	IF ( zw(k) > z_max_do1d ) EXIT
2487	ENDDO
2488	ENDIF
2489
2490	!
2491	!-- Upper plot limit for 2D vertical sections
2492	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2493	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2494	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2495	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2496	' (zu(nzt))'
2497	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2498	ENDIF
2499
2500	!
2501	!-- Upper plot limit for 3D arrays
2502	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2503
2504	!
2505	!-- Determine and check accuracy for compressed 3D plot output
2506	IF ( do3d_compress ) THEN
2507	!
2508	!-- Compression only permissible on T3E machines
2509	IF ( host(1:3) /= 't3e' ) THEN
2510	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2511	TRIM( host ) // '"'
2512	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2513	ENDIF
2514
2515	i = 1
2516	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2517
2518	ilen = LEN_TRIM( do3d_comp_prec(i) )
2519	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2520	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2521	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2522	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2523	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2524	ENDIF
2525
2526	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2527	var = do3d_comp_prec(i)(1:ilen-1)
2528
2529	SELECT CASE ( var )
2530
2531	CASE ( 'u' )
2532	j = 1
2533	CASE ( 'v' )
2534	j = 2
2535	CASE ( 'w' )
2536	j = 3
2537	CASE ( 'p' )
2538	j = 4
2539	CASE ( 'pt' )
2540	j = 5
2541
2542	CASE DEFAULT
2543	WRITE( message_string, * ) 'unknown variable "', &
2544	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2545	i, ')'
2546	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2547
2548	END SELECT
2549
2550	plot_3d_precision(j)%precision = prec
2551	i = i + 1
2552
2553	ENDDO
2554	ENDIF
2555
2556	!
2557	!-- Check the data output format(s)
2558	IF ( data_output_format(1) == ' ' ) THEN
2559	!
2560	!-- Default value
2561	netcdf_output = .TRUE.
2562	ELSE
2563	i = 1
2564	DO WHILE ( data_output_format(i) /= ' ' )
2565
2566	SELECT CASE ( data_output_format(i) )
2567
2568	CASE ( 'netcdf' )
2569	netcdf_output = .TRUE.
2570	CASE ( 'iso2d' )
2571	iso2d_output = .TRUE.
2572	CASE ( 'profil' )
2573	profil_output = .TRUE.
2574	CASE ( 'avs' )
2575	avs_output = .TRUE.
2576
2577	CASE DEFAULT
2578	message_string = 'unknown value for data_output_format "' // &
2579	TRIM( data_output_format(i) ) // '"'
2580	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2581
2582	END SELECT
2583
2584	i = i + 1
2585	IF ( i > 10 ) EXIT
2586
2587	ENDDO
2588
2589	ENDIF
2590
2591	!
2592	!-- Check netcdf precison
2593	ldum = .FALSE.
2594	CALL define_netcdf_header( 'ch', ldum, 0 )
2595
2596	!
2597	!-- Check, whether a constant diffusion coefficient shall be used
2598	IF ( km_constant /= -1.0 ) THEN
2599	IF ( km_constant < 0.0 ) THEN
2600	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2601	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2602	ELSE
2603	IF ( prandtl_number < 0.0 ) THEN
2604	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2605	' < 0.0'
2606	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2607	ENDIF
2608	constant_diffusion = .TRUE.
2609
2610	IF ( prandtl_layer ) THEN
2611	message_string = 'prandtl_layer is not allowed with fixed ' // &
2612	'value of km'
2613	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2614	ENDIF
2615	ENDIF
2616	ENDIF
2617
2618	!
2619	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2620	!-- for the horizontal diffusivity used within the outflow damping layer,
2621	!-- and check/set the width of the damping layer
2622	IF ( bc_lr /= 'cyclic' ) THEN
2623	IF ( km_damp_max == -1.0 ) THEN
2624	km_damp_max = 0.5 * dx
2625	ENDIF
2626	IF ( outflow_damping_width == -1.0 ) THEN
2627	outflow_damping_width = MIN( 20, nx/2 )
2628	ENDIF
2629	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2630	message_string = 'outflow_damping width out of range'
2631	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2632	ENDIF
2633	ENDIF
2634
2635	IF ( bc_ns /= 'cyclic' ) THEN
2636	IF ( km_damp_max == -1.0 ) THEN
2637	km_damp_max = 0.5 * dy
2638	ENDIF
2639	IF ( outflow_damping_width == -1.0 ) THEN
2640	outflow_damping_width = MIN( 20, ny/2 )
2641	ENDIF
2642	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2643	message_string = 'outflow_damping width out of range'
2644	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2645	ENDIF
2646	ENDIF
2647
2648	!
2649	!-- Check value range for rif
2650	IF ( rif_min >= rif_max ) THEN
2651	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2652	'than rif_max = ', rif_max
2653	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2654	ENDIF
2655
2656	!
2657	!-- Determine upper and lower hight level indices for random perturbations
2658	IF ( disturbance_level_b == -9999999.9 ) THEN
2659	IF ( ocean ) THEN
2660	disturbance_level_b = zu((nzt*2)/3)
2661	disturbance_level_ind_b = ( nzt * 2 ) / 3
2662	ELSE
2663	disturbance_level_b = zu(nzb+3)
2664	disturbance_level_ind_b = nzb + 3
2665	ENDIF
2666	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2667	WRITE( message_string, * ) 'disturbance_level_b = ', &
2668	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2669	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2670	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2671	WRITE( message_string, * ) 'disturbance_level_b = ', &
2672	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2673	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2674	ELSE
2675	DO k = 3, nzt-2
2676	IF ( disturbance_level_b <= zu(k) ) THEN
2677	disturbance_level_ind_b = k
2678	EXIT
2679	ENDIF
2680	ENDDO
2681	ENDIF
2682
2683	IF ( disturbance_level_t == -9999999.9 ) THEN
2684	IF ( ocean ) THEN
2685	disturbance_level_t = zu(nzt-3)
2686	disturbance_level_ind_t = nzt - 3
2687	ELSE
2688	disturbance_level_t = zu(nzt/3)
2689	disturbance_level_ind_t = nzt / 3
2690	ENDIF
2691	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2692	WRITE( message_string, * ) 'disturbance_level_t = ', &
2693	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2694	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2695	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2696	WRITE( message_string, * ) 'disturbance_level_t = ', &
2697	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2698	disturbance_level_b
2699	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2700	ELSE
2701	DO k = 3, nzt-2
2702	IF ( disturbance_level_t <= zu(k) ) THEN
2703	disturbance_level_ind_t = k
2704	EXIT
2705	ENDIF
2706	ENDDO
2707	ENDIF
2708
2709	!
2710	!-- Check again whether the levels determined this way are ok.
2711	!-- Error may occur at automatic determination and too few grid points in
2712	!-- z-direction.
2713	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2714	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2715	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2716	disturbance_level_b
2717	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2718	ENDIF
2719
2720	!
2721	!-- Determine the horizontal index range for random perturbations.
2722	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2723	!-- near the inflow and the perturbation area is further limited to ...(1)
2724	!-- after the initial phase of the flow.
2725	dist_nxl = 0; dist_nxr = nx
2726	dist_nys = 0; dist_nyn = ny
2727	IF ( bc_lr /= 'cyclic' ) THEN
2728	IF ( inflow_disturbance_begin == -1 ) THEN
2729	inflow_disturbance_begin = MIN( 10, nx/2 )
2730	ENDIF
2731	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2732	THEN
2733	message_string = 'inflow_disturbance_begin out of range'
2734	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2735	ENDIF
2736	IF ( inflow_disturbance_end == -1 ) THEN
2737	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2738	ENDIF
2739	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2740	THEN
2741	message_string = 'inflow_disturbance_end out of range'
2742	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2743	ENDIF
2744	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2745	IF ( inflow_disturbance_begin == -1 ) THEN
2746	inflow_disturbance_begin = MIN( 10, ny/2 )
2747	ENDIF
2748	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2749	THEN
2750	message_string = 'inflow_disturbance_begin out of range'
2751	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2752	ENDIF
2753	IF ( inflow_disturbance_end == -1 ) THEN
2754	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2755	ENDIF
2756	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2757	THEN
2758	message_string = 'inflow_disturbance_end out of range'
2759	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2760	ENDIF
2761	ENDIF
2762
2763	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2764	dist_nxr = nx - inflow_disturbance_begin
2765	dist_nxl(1) = nx - inflow_disturbance_end
2766	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2767	dist_nxl = inflow_disturbance_begin
2768	dist_nxr(1) = inflow_disturbance_end
2769	ENDIF
2770	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2771	dist_nyn = ny - inflow_disturbance_begin
2772	dist_nys(1) = ny - inflow_disturbance_end
2773	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2774	dist_nys = inflow_disturbance_begin
2775	dist_nyn(1) = inflow_disturbance_end
2776	ENDIF
2777
2778	!
2779	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2780	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2781	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2782	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2783	'condition at the inflow boundary'
2784	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2785	ENDIF
2786
2787	!
2788	!-- In case of turbulent inflow calculate the index of the recycling plane
2789	IF ( turbulent_inflow ) THEN
2790	IF ( recycling_width == 9999999.9 ) THEN
2791	!
2792	!-- Set the default value for the width of the recycling domain
2793	recycling_width = 0.1 * nx * dx
2794	ELSE
2795	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2796	WRITE( message_string, * ) 'illegal value for recycling_width:', &
2797	' ', recycling_width
2798	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2799	ENDIF
2800	ENDIF
2801	!
2802	!-- Calculate the index
2803	recycling_plane = recycling_width / dx
2804	ENDIF
2805
2806	!
2807	!-- Check random generator
2808	IF ( random_generator /= 'system-specific' .AND. &
2809	random_generator /= 'numerical-recipes' ) THEN
2810	message_string = 'unknown random generator: random_generator = "' // &
2811	TRIM( random_generator ) // '"'
2812	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2813	ENDIF
2814
2815	!
2816	!-- Determine damping level index for 1D model
2817	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2818	IF ( damp_level_1d == -1.0 ) THEN
2819	damp_level_1d = zu(nzt+1)
2820	damp_level_ind_1d = nzt + 1
2821	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2822	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2823	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
2824	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
2825	ELSE
2826	DO k = 1, nzt+1
2827	IF ( damp_level_1d <= zu(k) ) THEN
2828	damp_level_ind_1d = k
2829	EXIT
2830	ENDIF
2831	ENDDO
2832	ENDIF
2833	ENDIF
2834
2835	!
2836	!-- Check some other 1d-model parameters
2837	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2838	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2839	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
2840	'" is unknown'
2841	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
2842	ENDIF
2843	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2844	TRIM( dissipation_1d ) /= 'detering' ) THEN
2845	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
2846	'" is unknown'
2847	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
2848	ENDIF
2849
2850	!
2851	!-- Set time for the next user defined restart (time_restart is the
2852	!-- internal parameter for steering restart events)
2853	IF ( restart_time /= 9999999.9 ) THEN
2854	IF ( restart_time > time_since_reference_point ) THEN
2855	time_restart = restart_time
2856	ENDIF
2857	ELSE
2858	!
2859	!-- In case of a restart run, set internal parameter to default (no restart)
2860	!-- if the NAMELIST-parameter restart_time is omitted
2861	time_restart = 9999999.9
2862	ENDIF
2863
2864	!
2865	!-- Set default value of the time needed to terminate a model run
2866	IF ( termination_time_needed == -1.0 ) THEN
2867	IF ( host(1:3) == 'ibm' ) THEN
2868	termination_time_needed = 300.0
2869	ELSE
2870	termination_time_needed = 35.0
2871	ENDIF
2872	ENDIF
2873
2874	!
2875	!-- Check the time needed to terminate a model run
2876	IF ( host(1:3) == 't3e' ) THEN
2877	!
2878	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2879	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2880	IF ( termination_time_needed <= 30.0 ) THEN
2881	WRITE( message_string, * ) 'termination_time_needed = ', &
2882	termination_time_needed, ' must be > 30.0 on host "', &
2883	TRIM( host ), '"'
2884	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
2885	ENDIF
2886	ELSEIF ( host(1:3) == 'ibm' ) THEN
2887	!
2888	!-- On IBM-regatta machines the time should be at least 300 seconds,
2889	!-- because the job time consumed before executing palm (for compiling,
2890	!-- copying of files, etc.) has to be regarded
2891	IF ( termination_time_needed < 300.0 ) THEN
2892	WRITE( message_string, * ) 'termination_time_needed = ', &
2893	termination_time_needed, ' should be >= 300.0 on host "', &
2894	TRIM( host ), '"'
2895	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
2896	ENDIF
2897	ENDIF
2898
2899	!
2900	!-- Check pressure gradient conditions
2901	IF ( dp_external .AND. conserve_volume_flow ) THEN
2902	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
2903	' are .TRUE. but one of them must be .FALSE.'
2904	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
2905	ENDIF
2906	IF ( dp_external ) THEN
2907	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
2908	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
2909	' of range'
2910	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
2911	ENDIF
2912	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
2913	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
2914	', i.e. the external pressure gradient & will not be applied'
2915	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
2916	ENDIF
2917	ENDIF
2918	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
2919	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
2920	'.FALSE., i.e. the external pressure gradient & will not be applied'
2921	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
2922	ENDIF
2923	IF ( conserve_volume_flow ) THEN
2924	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
2925	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
2926	conserve_volume_flow_mode = 'inflow_profile'
2927	ELSE
2928	conserve_volume_flow_mode = 'initial_profiles'
2929	ENDIF
2930	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
2931	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
2932	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
2933	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
2934	conserve_volume_flow_mode
2935	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
2936	ENDIF
2937	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
2938	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
2939	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
2940	'require & conserve_volume_flow_mode = ''inflow_profile'''
2941	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
2942	ENDIF
2943	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
2944	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
2945	WRITE( message_string, * ) 'cyclic boundary conditions ', &
2946	'require & conserve_volume_flow_mode = ''initial_profiles''', &
2947	' or ''bulk_velocity'''
2948	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
2949	ENDIF
2950	ENDIF
2951	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
2952	( .NOT. conserve_volume_flow .OR. &
2953	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
2954	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
2955	'conserve_volume_flow = .T. and & ', &
2956	'conserve_volume_flow_mode = ''bulk_velocity'''
2957	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
2958	ENDIF
2959
2960	!
2961	!-- Check particle attributes
2962	IF ( particle_color /= 'none' ) THEN
2963	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
2964	particle_color /= 'z' ) THEN
2965	message_string = 'illegal value for parameter particle_color: ' // &
2966	TRIM( particle_color)
2967	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
2968	ELSE
2969	IF ( color_interval(2) <= color_interval(1) ) THEN
2970	message_string = 'color_interval(2) <= color_interval(1)'
2971	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
2972	ENDIF
2973	ENDIF
2974	ENDIF
2975
2976	IF ( particle_dvrpsize /= 'none' ) THEN
2977	IF ( particle_dvrpsize /= 'absw' ) THEN
2978	message_string = 'illegal value for parameter particle_dvrpsize:' // &
2979	' ' // TRIM( particle_color)
2980	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
2981	ELSE
2982	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
2983	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
2984	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
2985	ENDIF
2986	ENDIF
2987	ENDIF
2988
2989	!
2990	!-- Check &userpar parameters
2991	CALL user_check_parameters
2992
2993
2994	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |