Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 266

Last change on this file since 266 was 264, checked in by raasch, 16 years ago
new dvrp features added
Property svn:keywords set to `Id`
File size: 115.6 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Check particle_color, particle_dvrpsize, color_interval, dvrpsize_interval
7	! Bugfix: pressure included for profile output
8	! Check pressure gradient conditions
9	! topography_grid_convention moved from user_check_parameters
10	! 'single_street_canyon'
11	!
12	! Former revisions:
13	! -----------------
14	! $Id: check_parameters.f90 264 2009-03-21 08:14:44Z raasch $
15	!
16	! 222 2009-01-12 16:04:16Z letzel
17	! +user_check_parameters
18	! Output of messages replaced by message handling routine.
19	! Implementation of an MPI-1 coupling: replaced myid with target_id,
20	! deleted __mpi2 directives
21	! Check that PALM is called with mrun -K parallel for coupling
22	!
23	! 197 2008-09-16 15:29:03Z raasch
24	! Bug fix: Construction of vertical profiles when 10 gradients have been
25	! specified in the parameter list (ug, vg, pt, q, sa, lad)
26	!
27	! Strict grid matching along z is not needed for mg-solver.
28	! Leaf area density (LAD) explicitly set to its surface value at k=0
29	! Case of reading data for recycling included in initializing_actions,
30	! check of turbulent_inflow and calculation of recycling_plane.
31	! q*2 profile added
32	!
33	! 138 2007-11-28 10:03:58Z letzel
34	! Plant canopy added
35	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
36	! Multigrid solver allows topography, checking of dt_sort_particles
37	! Bugfix: initializing u_init and v_init in case of ocean runs
38	!
39	! 109 2007-08-28 15:26:47Z letzel
40	! Check coupling_mode and set default (obligatory) values (like boundary
41	! conditions for temperature and fluxes) in case of coupled runs.
42	! +profiles for wp and w"e
43	! Bugfix: Error message concerning output of particle concentration (pc)
44	! modified
45	! More checks and more default values for coupled runs
46	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
47	! cloud_physics = .T.)
48	! Rayleigh damping for ocean fixed.
49	! Check and, if necessary, set default value for dt_coupling
50	!
51	! 97 2007-06-21 08:23:15Z raasch
52	! Initial salinity profile is calculated, salinity boundary conditions are
53	! checked,
54	! z_max_do1d is checked only in case of ocean = .f.,
55	! +initial temperature and geostrophic velocity profiles for the ocean version,
56	! use_pt_reference renamed use_reference
57	!
58	! 89 2007-05-25 12:08:31Z raasch
59	! Check for user-defined profiles
60	!
61	! 75 2007-03-22 09:54:05Z raasch
62	! "by_user" allowed as initializing action, -data_output_ts,
63	! leapfrog with non-flat topography not allowed any more, loop_optimization
64	! and pt_reference are checked, moisture renamed humidity,
65	! output of precipitation amount/rate and roughnes length + check
66	! possible negative humidities are avoided in initial profile,
67	! dirichlet/neumann changed to dirichlet/radiation, etc.,
68	! revision added to run_description_header
69	!
70	! 20 2007-02-26 00:12:32Z raasch
71	! Temperature and humidity gradients at top are now calculated for nzt+1,
72	! top_heatflux and respective boundary condition bc_pt_t is checked
73	!
74	! RCS Log replace by Id keyword, revision history cleaned up
75	!
76	! Revision 1.61 2006/08/04 14:20:25 raasch
77	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
78	! use_upstream_for_tke, default value for dt_dopts,
79	! generation of file header moved from routines palm and header to here
80	!
81	! Revision 1.1 1997/08/26 06:29:23 raasch
82	! Initial revision
83	!
84	!
85	! Description:
86	! ------------
87	! Check control parameters and deduce further quantities.
88	!------------------------------------------------------------------------------!
89
90	USE arrays_3d
91	USE constants
92	USE control_parameters
93	USE dvrp_variables
94	USE grid_variables
95	USE indices
96	USE model_1d
97	USE netcdf_control
98	USE particle_attributes
99	USE pegrid
100	USE profil_parameter
101	USE statistics
102	USE transpose_indices
103
104	IMPLICIT NONE
105
106	CHARACTER (LEN=1) :: sq
107	CHARACTER (LEN=6) :: var
108	CHARACTER (LEN=7) :: unit
109	CHARACTER (LEN=8) :: date
110	CHARACTER (LEN=10) :: time
111	CHARACTER (LEN=40) :: coupling_string
112	CHARACTER (LEN=100) :: action
113
114	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
115	position, prec
116	LOGICAL :: found, ldum
117	REAL :: gradient, maxn, maxp, remote = 0.0
118
119	!
120	!-- Warning, if host is not set
121	IF ( host(1:1) == ' ' ) THEN
122	message_string = '"host" is not set. Please check that environment ' // &
123	'variable "localhost" & is set before running PALM'
124	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
125	ENDIF
126
127	!
128	!-- Check the coupling mode
129	IF ( coupling_mode /= 'uncoupled' .AND. &
130	coupling_mode /= 'atmosphere_to_ocean' .AND. &
131	coupling_mode /= 'ocean_to_atmosphere' ) THEN
132	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
133	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
134	ENDIF
135
136	!
137	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
138	IF ( coupling_mode /= 'uncoupled' ) THEN
139
140	IF ( dt_coupling == 9999999.9 ) THEN
141	message_string = 'dt_coupling is not set but required for coup' // &
142	'ling mode "' // TRIM( coupling_mode ) // '"'
143	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
144	ENDIF
145
146	#if defined( __parallel )
147	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
148	ierr )
149	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
150	status, ierr )
151	IF ( dt_coupling /= remote ) THEN
152	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
153	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
154	'dt_coupling_remote = ', remote
155	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
156	ENDIF
157	IF ( dt_coupling <= 0.0 ) THEN
158	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
159	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
160	status, ierr )
161	dt_coupling = MAX( dt_max, remote )
162	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
163	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
164	'MAX(dt_max(A,O)) = ', dt_coupling
165	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
166	ENDIF
167
168	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
169	ierr )
170	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
171	status, ierr )
172	IF ( restart_time /= remote ) THEN
173	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
174	'": restart_time = ', restart_time, '& is not equal to ', &
175	'restart_time_remote = ', remote
176	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
177	ENDIF
178
179	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
180	ierr )
181	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
182	status, ierr )
183	IF ( dt_restart /= remote ) THEN
184	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
185	'": dt_restart = ', dt_restart, '& is not equal to ', &
186	'dt_restart_remote = ', remote
187	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
188	ENDIF
189
190	CALL MPI_SEND( end_time, 1, MPI_REAL, target_id, 14, comm_inter, ierr )
191	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
192	status, ierr )
193	IF ( end_time /= remote ) THEN
194	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
195	'": end_time = ', end_time, '& is not equal to ', &
196	'end_time_remote = ', remote
197	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
198	ENDIF
199
200	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
201	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
202	status, ierr )
203	IF ( dx /= remote ) THEN
204	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
205	'": dx = ', dx, '& is not equal to dx_remote = ', remote
206	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
207	ENDIF
208
209	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
210	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
211	status, ierr )
212	IF ( dy /= remote ) THEN
213	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
214	'": dy = ', dy, '& is not equal to dy_remote = ', remote
215	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
216	ENDIF
217
218	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
219	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
220	status, ierr )
221	IF ( nx /= iremote ) THEN
222	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
223	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
224	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
225	ENDIF
226
227	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
228	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
229	status, ierr )
230	IF ( ny /= iremote ) THEN
231	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
232	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
233	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
234	ENDIF
235	#else
236	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
237	' ''mrun -K parallel'''
238	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
239	#endif
240	ENDIF
241
242	#if defined( __parallel )
243	!
244	!-- Exchange via intercommunicator
245	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
246	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
247	ierr )
248	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
249	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
250	comm_inter, status, ierr )
251	ENDIF
252	#endif
253
254
255	!
256	!-- Generate the file header which is used as a header for most of PALM's
257	!-- output files
258	CALL DATE_AND_TIME( date, time )
259	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
260	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
261	IF ( coupling_mode == 'uncoupled' ) THEN
262	coupling_string = ''
263	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
264	coupling_string = ' coupled (atmosphere)'
265	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
266	coupling_string = ' coupled (ocean)'
267	ENDIF
268
269	WRITE ( run_description_header, &
270	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
271	TRIM( version ), TRIM( revision ), 'run: ', &
272	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
273	'host: ', TRIM( host ), run_date, run_time
274
275	!
276	!-- Check the general loop optimization method
277	IF ( loop_optimization == 'default' ) THEN
278	IF ( host(1:3) == 'nec' ) THEN
279	loop_optimization = 'vector'
280	ELSE
281	loop_optimization = 'cache'
282	ENDIF
283	ENDIF
284	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
285	.AND. loop_optimization /= 'vector' ) THEN
286	message_string = 'illegal value given for loop_optimization: "' // &
287	TRIM( loop_optimization ) // '"'
288	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
289	ENDIF
290
291	!
292	!-- Check topography setting (check for illegal parameter combinations)
293	IF ( topography /= 'flat' ) THEN
294	action = ' '
295	IF ( scalar_advec /= 'pw-scheme' ) THEN
296	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
297	ENDIF
298	IF ( momentum_advec /= 'pw-scheme' ) THEN
299	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
300	ENDIF
301	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
302	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
303	ENDIF
304	IF ( psolver == 'sor' ) THEN
305	WRITE( action, '(A,A)' ) 'psolver = ', psolver
306	ENDIF
307	IF ( sloping_surface ) THEN
308	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
309	ENDIF
310	IF ( galilei_transformation ) THEN
311	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
312	ENDIF
313	IF ( cloud_physics ) THEN
314	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
315	ENDIF
316	IF ( cloud_droplets ) THEN
317	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
318	ENDIF
319	IF ( humidity ) THEN
320	WRITE( action, '(A)' ) 'humidity = .TRUE.'
321	ENDIF
322	IF ( .NOT. prandtl_layer ) THEN
323	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
324	ENDIF
325	IF ( action /= ' ' ) THEN
326	message_string = 'a non-flat topography does not allow ' // &
327	TRIM( action )
328	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
329	ENDIF
330	!
331	!-- In case of non-flat topography, check whether the convention how to
332	!-- define the topography grid has been set correctly, or whether the default
333	!-- is applicable. If this is not possible, abort.
334	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
335	IF ( TRIM( topography ) /= 'single_building' .AND. &
336	TRIM( topography ) /= 'single_street_canyon' .AND. &
337	TRIM( topography ) /= 'read_from_file' ) THEN
338	!-- The default value is not applicable here, because it is only valid
339	!-- for the two standard cases 'single_building' and 'read_from_file'
340	!-- defined in init_grid.
341	WRITE( message_string, * ) &
342	'The value for "topography_grid_convention" ', &
343	'is not set. Its default value is & only valid for ', &
344	'"topography" = ''single_building'', ', &
345	'''single_street_canyon'' & or ''read_from_file''.', &
346	' & Choose ''cell_edge'' or ''cell_center''.'
347	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
348	ELSE
349	!-- The default value is applicable here.
350	!-- Set convention according to topography.
351	IF ( TRIM( topography ) == 'single_building' .OR. &
352	TRIM( topography ) == 'single_street_canyon' ) THEN
353	topography_grid_convention = 'cell_edge'
354	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
355	topography_grid_convention = 'cell_center'
356	ENDIF
357	ENDIF
358	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
359	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
360	WRITE( message_string, * ) &
361	'The value for "topography_grid_convention" is ', &
362	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
363	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
364	ENDIF
365
366	ENDIF
367
368	!
369	!-- Check ocean setting
370	IF ( ocean ) THEN
371	action = ' '
372	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
373	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
374	ENDIF
375	IF ( momentum_advec == 'ups-scheme' ) THEN
376	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
377	ENDIF
378	IF ( action /= ' ' ) THEN
379	message_string = 'ocean = .T. does not allow ' // TRIM( action )
380	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
381	ENDIF
382	ENDIF
383
384	!
385	!-- Check whether there are any illegal values
386	!-- Pressure solver:
387	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
388	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
389	message_string = 'unknown solver for perturbation pressure: psolver' // &
390	' = "' // TRIM( psolver ) // '"'
391	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
392	ENDIF
393
394	#if defined( __parallel )
395	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
396	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
397	'for a 1d domain-decomposition along x & please do' // &
398	' not set npey/=1 in the parameter file'
399	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
400	ENDIF
401	IF ( psolver == 'poisfft_hybrid' .AND. &
402	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
403	psolver == 'multigrid' .AND. &
404	( nxra > nxr .OR. nyna > nyn ) ) THEN
405	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
406	'work for subdomains with unequal size & please ' // &
407	'set grid_matching = ''strict'' in the parameter file'
408	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
409	ENDIF
410	#else
411	IF ( psolver == 'poisfft_hybrid' ) THEN
412	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
413	' for a parallel environment'
414	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
415	ENDIF
416	#endif
417
418	IF ( psolver == 'multigrid' ) THEN
419	IF ( cycle_mg == 'w' ) THEN
420	gamma_mg = 2
421	ELSEIF ( cycle_mg == 'v' ) THEN
422	gamma_mg = 1
423	ELSE
424	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
425	TRIM( cycle_mg ) // '"'
426	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
427	ENDIF
428	ENDIF
429
430	IF ( fft_method /= 'singleton-algorithm' .AND. &
431	fft_method /= 'temperton-algorithm' .AND. &
432	fft_method /= 'system-specific' ) THEN
433	message_string = 'unknown fft-algorithm: fft_method = "' // &
434	TRIM( fft_method ) // '"'
435	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
436	ENDIF
437
438	!
439	!-- Advection schemes:
440	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
441	THEN
442	message_string = 'unknown advection scheme: momentum_advec = "' // &
443	TRIM( momentum_advec ) // '"'
444	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
445	ENDIF
446	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
447	.AND. timestep_scheme /= 'euler' ) THEN
448	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
449	'" is not allowed with timestep_scheme = "' // &
450	TRIM( timestep_scheme ) // '"'
451	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
452	ENDIF
453
454	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
455	scalar_advec /= 'ups-scheme' ) THEN
456	message_string = 'unknown advection scheme: scalar_advec = "' // &
457	TRIM( scalar_advec ) // '"'
458	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
459	ENDIF
460
461	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
462	use_upstream_for_tke = .TRUE.
463	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
464	'use_sgs_for_particles = .TRUE.'
465	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
466	ENDIF
467
468	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
469	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
470	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
471	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
472	ENDIF
473
474	!
475	!-- Timestep schemes:
476	SELECT CASE ( TRIM( timestep_scheme ) )
477
478	CASE ( 'euler' )
479	intermediate_timestep_count_max = 1
480	asselin_filter_factor = 0.0
481
482	CASE ( 'leapfrog', 'leapfrog+euler' )
483	intermediate_timestep_count_max = 1
484
485	CASE ( 'runge-kutta-2' )
486	intermediate_timestep_count_max = 2
487	asselin_filter_factor = 0.0
488
489	CASE ( 'runge-kutta-3' )
490	intermediate_timestep_count_max = 3
491	asselin_filter_factor = 0.0
492
493	CASE DEFAULT
494	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
495	TRIM( timestep_scheme ) // '"'
496	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
497
498	END SELECT
499
500	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
501	THEN
502	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
503	'" & does not work with timestep_scheme "' // &
504	TRIM( timestep_scheme ) // '"'
505	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
506	ENDIF
507
508	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
509	THEN
510	message_string = 'momentum advection scheme "' // &
511	TRIM( momentum_advec ) // '" & does not work with ' // &
512	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
513	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
514	ENDIF
515
516	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
517	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
518	!
519	!-- No restart run: several initialising actions are possible
520	action = initializing_actions
521	DO WHILE ( TRIM( action ) /= '' )
522	position = INDEX( action, ' ' )
523	SELECT CASE ( action(1:position-1) )
524
525	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
526	'by_user', 'initialize_vortex', 'initialize_ptanom' )
527	action = action(position+1:)
528
529	CASE DEFAULT
530	message_string = 'initializing_action = "' // &
531	TRIM( action ) // '" unkown or not allowed'
532	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
533
534	END SELECT
535	ENDDO
536	ENDIF
537
538	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
539	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
540	message_string = 'initializing_actions = "set_constant_profiles"' // &
541	' and "set_1d-model_profiles" are not allowed ' // &
542	'simultaneously'
543	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
544	ENDIF
545
546	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
547	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
548	message_string = 'initializing_actions = "set_constant_profiles"' // &
549	' and "by_user" are not allowed simultaneously'
550	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
551	ENDIF
552
553	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
554	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
555	message_string = 'initializing_actions = "by_user" and ' // &
556	'"set_1d-model_profiles" are not allowed simultaneously'
557	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
558	ENDIF
559
560	IF ( cloud_physics .AND. .NOT. humidity ) THEN
561	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
562	'not allowed with humidity = ', humidity
563	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
564	ENDIF
565
566	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
567	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
568	'not allowed with cloud_physics = ', cloud_physics
569	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
570	ENDIF
571
572	IF ( humidity .AND. sloping_surface ) THEN
573	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
574	'are not allowed simultaneously'
575	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
576	ENDIF
577
578	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
579	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
580	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
581	ENDIF
582
583	IF ( passive_scalar .AND. humidity ) THEN
584	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
585	'is not allowed simultaneously'
586	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
587	ENDIF
588
589	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
590	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
591	' = .TRUE.'
592	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
593	ENDIF
594
595	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
596	message_string = 'illegal value "' // TRIM( grid_matching ) // &
597	'" found for parameter grid_matching'
598	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
599	ENDIF
600
601	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
602	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
603	'coefficient & given value is drag_coefficient = 0.0'
604	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
605	ENDIF
606
607	!
608	!-- In case of no model continuation run, check initialising parameters and
609	!-- deduce further quantities
610	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
611
612	!
613	!-- Initial profiles for 1D and 3D model, respectively
614	u_init = ug_surface
615	v_init = vg_surface
616	pt_init = pt_surface
617	IF ( humidity ) q_init = q_surface
618	IF ( ocean ) sa_init = sa_surface
619	IF ( passive_scalar ) q_init = s_surface
620	IF ( plant_canopy ) lad = 0.0
621
622	!
623	!--
624	!-- If required, compute initial profile of the geostrophic wind
625	!-- (component ug)
626	i = 1
627	gradient = 0.0
628
629	IF ( .NOT. ocean ) THEN
630
631	ug_vertical_gradient_level_ind(1) = 0
632	ug(0) = ug_surface
633	DO k = 1, nzt+1
634	IF ( i < 11 ) THEN
635	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
636	ug_vertical_gradient_level(i) >= 0.0 ) THEN
637	gradient = ug_vertical_gradient(i) / 100.0
638	ug_vertical_gradient_level_ind(i) = k - 1
639	i = i + 1
640	ENDIF
641	ENDIF
642	IF ( gradient /= 0.0 ) THEN
643	IF ( k /= 1 ) THEN
644	ug(k) = ug(k-1) + dzu(k) * gradient
645	ELSE
646	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
647	ENDIF
648	ELSE
649	ug(k) = ug(k-1)
650	ENDIF
651	ENDDO
652
653	ELSE
654
655	ug_vertical_gradient_level_ind(1) = nzt+1
656	ug(nzt+1) = ug_surface
657	DO k = nzt, 0, -1
658	IF ( i < 11 ) THEN
659	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
660	ug_vertical_gradient_level(i) <= 0.0 ) THEN
661	gradient = ug_vertical_gradient(i) / 100.0
662	ug_vertical_gradient_level_ind(i) = k + 1
663	i = i + 1
664	ENDIF
665	ENDIF
666	IF ( gradient /= 0.0 ) THEN
667	IF ( k /= nzt ) THEN
668	ug(k) = ug(k+1) - dzu(k+1) * gradient
669	ELSE
670	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
671	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
672	ENDIF
673	ELSE
674	ug(k) = ug(k+1)
675	ENDIF
676	ENDDO
677
678	ENDIF
679
680	u_init = ug
681
682	!
683	!-- In case of no given gradients for ug, choose a vanishing gradient
684	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
685	ug_vertical_gradient_level(1) = 0.0
686	ENDIF
687
688	!
689	!--
690	!-- If required, compute initial profile of the geostrophic wind
691	!-- (component vg)
692	i = 1
693	gradient = 0.0
694
695	IF ( .NOT. ocean ) THEN
696
697	vg_vertical_gradient_level_ind(1) = 0
698	vg(0) = vg_surface
699	DO k = 1, nzt+1
700	IF ( i < 11 ) THEN
701	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
702	vg_vertical_gradient_level(i) >= 0.0 ) THEN
703	gradient = vg_vertical_gradient(i) / 100.0
704	vg_vertical_gradient_level_ind(i) = k - 1
705	i = i + 1
706	ENDIF
707	ENDIF
708	IF ( gradient /= 0.0 ) THEN
709	IF ( k /= 1 ) THEN
710	vg(k) = vg(k-1) + dzu(k) * gradient
711	ELSE
712	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
713	ENDIF
714	ELSE
715	vg(k) = vg(k-1)
716	ENDIF
717	ENDDO
718
719	ELSE
720
721	vg_vertical_gradient_level_ind(1) = nzt+1
722	vg(nzt+1) = vg_surface
723	DO k = nzt, 0, -1
724	IF ( i < 11 ) THEN
725	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
726	vg_vertical_gradient_level(i) <= 0.0 ) THEN
727	gradient = vg_vertical_gradient(i) / 100.0
728	vg_vertical_gradient_level_ind(i) = k + 1
729	i = i + 1
730	ENDIF
731	ENDIF
732	IF ( gradient /= 0.0 ) THEN
733	IF ( k /= nzt ) THEN
734	vg(k) = vg(k+1) - dzu(k+1) * gradient
735	ELSE
736	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
737	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
738	ENDIF
739	ELSE
740	vg(k) = vg(k+1)
741	ENDIF
742	ENDDO
743
744	ENDIF
745
746	v_init = vg
747
748	!
749	!-- In case of no given gradients for vg, choose a vanishing gradient
750	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
751	vg_vertical_gradient_level(1) = 0.0
752	ENDIF
753
754	!
755	!-- Compute initial temperature profile using the given temperature gradients
756	i = 1
757	gradient = 0.0
758
759	IF ( .NOT. ocean ) THEN
760
761	pt_vertical_gradient_level_ind(1) = 0
762	DO k = 1, nzt+1
763	IF ( i < 11 ) THEN
764	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
765	pt_vertical_gradient_level(i) >= 0.0 ) THEN
766	gradient = pt_vertical_gradient(i) / 100.0
767	pt_vertical_gradient_level_ind(i) = k - 1
768	i = i + 1
769	ENDIF
770	ENDIF
771	IF ( gradient /= 0.0 ) THEN
772	IF ( k /= 1 ) THEN
773	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
774	ELSE
775	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
776	ENDIF
777	ELSE
778	pt_init(k) = pt_init(k-1)
779	ENDIF
780	ENDDO
781
782	ELSE
783
784	pt_vertical_gradient_level_ind(1) = nzt+1
785	DO k = nzt, 0, -1
786	IF ( i < 11 ) THEN
787	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
788	pt_vertical_gradient_level(i) <= 0.0 ) THEN
789	gradient = pt_vertical_gradient(i) / 100.0
790	pt_vertical_gradient_level_ind(i) = k + 1
791	i = i + 1
792	ENDIF
793	ENDIF
794	IF ( gradient /= 0.0 ) THEN
795	IF ( k /= nzt ) THEN
796	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
797	ELSE
798	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
799	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
800	ENDIF
801	ELSE
802	pt_init(k) = pt_init(k+1)
803	ENDIF
804	ENDDO
805
806	ENDIF
807
808	!
809	!-- In case of no given temperature gradients, choose gradient of neutral
810	!-- stratification
811	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
812	pt_vertical_gradient_level(1) = 0.0
813	ENDIF
814
815	!
816	!-- Store temperature gradient at the top boundary for possible Neumann
817	!-- boundary condition
818	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
819
820	!
821	!-- If required, compute initial humidity or scalar profile using the given
822	!-- humidity/scalar gradient. In case of scalar transport, initially store
823	!-- values of the scalar parameters on humidity parameters
824	IF ( passive_scalar ) THEN
825	bc_q_b = bc_s_b
826	bc_q_t = bc_s_t
827	q_surface = s_surface
828	q_surface_initial_change = s_surface_initial_change
829	q_vertical_gradient = s_vertical_gradient
830	q_vertical_gradient_level = s_vertical_gradient_level
831	surface_waterflux = surface_scalarflux
832	ENDIF
833
834	IF ( humidity .OR. passive_scalar ) THEN
835
836	i = 1
837	gradient = 0.0
838	q_vertical_gradient_level_ind(1) = 0
839	DO k = 1, nzt+1
840	IF ( i < 11 ) THEN
841	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
842	q_vertical_gradient_level(i) >= 0.0 ) THEN
843	gradient = q_vertical_gradient(i) / 100.0
844	q_vertical_gradient_level_ind(i) = k - 1
845	i = i + 1
846	ENDIF
847	ENDIF
848	IF ( gradient /= 0.0 ) THEN
849	IF ( k /= 1 ) THEN
850	q_init(k) = q_init(k-1) + dzu(k) * gradient
851	ELSE
852	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
853	ENDIF
854	ELSE
855	q_init(k) = q_init(k-1)
856	ENDIF
857	!
858	!-- Avoid negative humidities
859	IF ( q_init(k) < 0.0 ) THEN
860	q_init(k) = 0.0
861	ENDIF
862	ENDDO
863
864	!
865	!-- In case of no given humidity gradients, choose zero gradient
866	!-- conditions
867	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
868	q_vertical_gradient_level(1) = 0.0
869	ENDIF
870
871	!
872	!-- Store humidity gradient at the top boundary for possile Neumann
873	!-- boundary condition
874	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
875
876	ENDIF
877
878	!
879	!-- If required, compute initial salinity profile using the given salinity
880	!-- gradients
881	IF ( ocean ) THEN
882
883	i = 1
884	gradient = 0.0
885
886	sa_vertical_gradient_level_ind(1) = nzt+1
887	DO k = nzt, 0, -1
888	IF ( i < 11 ) THEN
889	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
890	sa_vertical_gradient_level(i) <= 0.0 ) THEN
891	gradient = sa_vertical_gradient(i) / 100.0
892	sa_vertical_gradient_level_ind(i) = k + 1
893	i = i + 1
894	ENDIF
895	ENDIF
896	IF ( gradient /= 0.0 ) THEN
897	IF ( k /= nzt ) THEN
898	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
899	ELSE
900	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
901	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
902	ENDIF
903	ELSE
904	sa_init(k) = sa_init(k+1)
905	ENDIF
906	ENDDO
907
908	ENDIF
909
910	!
911	!-- If required compute the profile of leaf area density used in the plant canopy model
912	IF ( plant_canopy ) THEN
913
914	i = 1
915	gradient = 0.0
916
917	IF ( .NOT. ocean ) THEN
918
919	lad(0) = lad_surface
920
921	lad_vertical_gradient_level_ind(1) = 0
922	DO k = 1, pch_index
923	IF ( i < 11 ) THEN
924	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
925	lad_vertical_gradient_level(i) >= 0.0 ) THEN
926	gradient = lad_vertical_gradient(i)
927	lad_vertical_gradient_level_ind(i) = k - 1
928	i = i + 1
929	ENDIF
930	ENDIF
931	IF ( gradient /= 0.0 ) THEN
932	IF ( k /= 1 ) THEN
933	lad(k) = lad(k-1) + dzu(k) * gradient
934	ELSE
935	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
936	ENDIF
937	ELSE
938	lad(k) = lad(k-1)
939	ENDIF
940	ENDDO
941
942	ENDIF
943
944	!
945	!-- In case of no given leaf area density gradients, choose a vanishing gradient
946	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
947	lad_vertical_gradient_level(1) = 0.0
948	ENDIF
949
950	ENDIF
951
952	ENDIF
953
954	!
955	!-- Compute Coriolis parameter
956	f = 2.0 * omega * SIN( phi / 180.0 * pi )
957	fs = 2.0 * omega * COS( phi / 180.0 * pi )
958
959	!
960	!-- Ocean runs always use reference values in the buoyancy term. Therefore
961	!-- set the reference temperature equal to the surface temperature.
962	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
963
964	!
965	!-- Reference value has to be used in buoyancy terms
966	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
967
968	!
969	!-- Sign of buoyancy/stability terms
970	IF ( ocean ) atmos_ocean_sign = -1.0
971
972	!
973	!-- Ocean version must use flux boundary conditions at the top
974	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
975	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
976	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
977	ENDIF
978
979	!
980	!-- In case of a given slope, compute the relevant quantities
981	IF ( alpha_surface /= 0.0 ) THEN
982	IF ( ABS( alpha_surface ) > 90.0 ) THEN
983	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
984	' ) must be < 90.0'
985	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
986	ENDIF
987	sloping_surface = .TRUE.
988	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
989	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
990	ENDIF
991
992	!
993	!-- Check time step and cfl_factor
994	IF ( dt /= -1.0 ) THEN
995	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
996	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
997	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
998	ENDIF
999	dt_3d = dt
1000	dt_fixed = .TRUE.
1001	ENDIF
1002
1003	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1004	IF ( cfl_factor == -1.0 ) THEN
1005	IF ( momentum_advec == 'ups-scheme' .OR. &
1006	scalar_advec == 'ups-scheme' ) THEN
1007	cfl_factor = 0.8
1008	ELSE
1009	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1010	cfl_factor = 0.8
1011	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1012	cfl_factor = 0.9
1013	ELSE
1014	cfl_factor = 0.1
1015	ENDIF
1016	ENDIF
1017	ELSE
1018	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1019	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1020	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1021	ENDIF
1022	ENDIF
1023
1024	!
1025	!-- Store simulated time at begin
1026	simulated_time_at_begin = simulated_time
1027
1028	!
1029	!-- Set wind speed in the Galilei-transformed system
1030	IF ( galilei_transformation ) THEN
1031	IF ( use_ug_for_galilei_tr .AND. &
1032	ug_vertical_gradient_level(1) == 0.0 .AND. &
1033	vg_vertical_gradient_level(1) == 0.0 ) THEN
1034	u_gtrans = ug_surface
1035	v_gtrans = vg_surface
1036	ELSEIF ( use_ug_for_galilei_tr .AND. &
1037	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1038	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1039	' with galilei transformation'
1040	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1041	ELSEIF ( use_ug_for_galilei_tr .AND. &
1042	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1043	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1044	' with galilei transformation'
1045	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1046	ELSE
1047	message_string = 'variable translation speed used for galilei-' // &
1048	'transformation, which may cause & instabilities in stably ' // &
1049	'stratified regions'
1050	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1051	ENDIF
1052	ENDIF
1053
1054	!
1055	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1056	!-- fluxes have to be used in the diffusion-terms
1057	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1058
1059	!
1060	!-- Check boundary conditions and set internal variables:
1061	!-- Lateral boundary conditions
1062	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1063	bc_lr /= 'radiation/dirichlet' ) THEN
1064	message_string = 'unknown boundary condition: bc_lr = "' // &
1065	TRIM( bc_lr ) // '"'
1066	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1067	ENDIF
1068	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1069	bc_ns /= 'radiation/dirichlet' ) THEN
1070	message_string = 'unknown boundary condition: bc_ns = "' // &
1071	TRIM( bc_ns ) // '"'
1072	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1073	ENDIF
1074
1075	!
1076	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1077	!-- Willimas advection scheme. Several schemes and tools do not work with
1078	!-- non-cyclic boundary conditions.
1079	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1080	IF ( psolver /= 'multigrid' ) THEN
1081	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1082	'psolver = "' // TRIM( psolver ) // '"'
1083	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1084	ENDIF
1085	IF ( momentum_advec /= 'pw-scheme' ) THEN
1086	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1087	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1088	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1089	ENDIF
1090	IF ( scalar_advec /= 'pw-scheme' ) THEN
1091	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1092	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1093	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1094	ENDIF
1095	IF ( galilei_transformation ) THEN
1096	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1097	'galilei_transformation = .T.'
1098	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1099	ENDIF
1100	ENDIF
1101
1102	!
1103	!-- Bottom boundary condition for the turbulent Kinetic energy
1104	IF ( bc_e_b == 'neumann' ) THEN
1105	ibc_e_b = 1
1106	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1107	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1108	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1109	ENDIF
1110	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1111	ibc_e_b = 2
1112	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1113	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1114	TRIM( bc_e_b ) // '"'
1115	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1116	ENDIF
1117	IF ( .NOT. prandtl_layer ) THEN
1118	bc_e_b = 'neumann'
1119	ibc_e_b = 1
1120	message_string = 'boundary condition bc_e_b changed to "' // &
1121	TRIM( bc_e_b ) // '"'
1122	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1123	ENDIF
1124	ELSE
1125	message_string = 'unknown boundary condition: bc_e_b = "' // &
1126	TRIM( bc_e_b ) // '"'
1127	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1128	ENDIF
1129
1130	!
1131	!-- Boundary conditions for perturbation pressure
1132	IF ( bc_p_b == 'dirichlet' ) THEN
1133	ibc_p_b = 0
1134	ELSEIF ( bc_p_b == 'neumann' ) THEN
1135	ibc_p_b = 1
1136	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1137	ibc_p_b = 2
1138	ELSE
1139	message_string = 'unknown boundary condition: bc_p_b = "' // &
1140	TRIM( bc_p_b ) // '"'
1141	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1142	ENDIF
1143	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1144	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1145	'" not allowed with prandtl_layer = .FALSE.'
1146	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1147	ENDIF
1148	IF ( bc_p_t == 'dirichlet' ) THEN
1149	ibc_p_t = 0
1150	ELSEIF ( bc_p_t == 'neumann' ) THEN
1151	ibc_p_t = 1
1152	ELSE
1153	message_string = 'unknown boundary condition: bc_p_t = "' // &
1154	TRIM( bc_p_t ) // '"'
1155	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1156	ENDIF
1157
1158	!
1159	!-- Boundary conditions for potential temperature
1160	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1161	ibc_pt_b = 2
1162	ELSE
1163	IF ( bc_pt_b == 'dirichlet' ) THEN
1164	ibc_pt_b = 0
1165	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1166	ibc_pt_b = 1
1167	ELSE
1168	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1169	TRIM( bc_pt_b ) // '"'
1170	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1171	ENDIF
1172	ENDIF
1173
1174	IF ( bc_pt_t == 'dirichlet' ) THEN
1175	ibc_pt_t = 0
1176	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1177	ibc_pt_t = 1
1178	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1179	ibc_pt_t = 2
1180	ELSE
1181	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1182	TRIM( bc_pt_t ) // '"'
1183	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1184	ENDIF
1185
1186	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1187	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1188	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1189	top_momentumflux_v /= 9999999.9 ) THEN
1190	constant_top_momentumflux = .TRUE.
1191	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1192	top_momentumflux_v == 9999999.9 ) ) THEN
1193	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1194	'must be set'
1195	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1196	ENDIF
1197
1198	!
1199	!-- A given surface temperature implies Dirichlet boundary condition for
1200	!-- temperature. In this case specification of a constant heat flux is
1201	!-- forbidden.
1202	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1203	surface_heatflux /= 0.0 ) THEN
1204	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1205	'& is not allowed with constant_heatflux = .TRUE.'
1206	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1207	ENDIF
1208	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1209	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1210	'wed with pt_surface_initial_change (/=0) = ', &
1211	pt_surface_initial_change
1212	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1213	ENDIF
1214
1215	!
1216	!-- A given temperature at the top implies Dirichlet boundary condition for
1217	!-- temperature. In this case specification of a constant heat flux is
1218	!-- forbidden.
1219	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1220	top_heatflux /= 0.0 ) THEN
1221	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1222	'" is not allowed with constant_top_heatflux = .TRUE.'
1223	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1224	ENDIF
1225
1226	!
1227	!-- Boundary conditions for salinity
1228	IF ( ocean ) THEN
1229	IF ( bc_sa_t == 'dirichlet' ) THEN
1230	ibc_sa_t = 0
1231	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1232	ibc_sa_t = 1
1233	ELSE
1234	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1235	TRIM( bc_sa_t ) // '"'
1236	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1237	ENDIF
1238
1239	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1240	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1241	message_string = 'boundary condition: bc_sa_t = "' // &
1242	TRIM( bc_sa_t ) // '" requires to set ' // &
1243	'top_salinityflux'
1244	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1245	ENDIF
1246
1247	!
1248	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1249	!-- salinity. In this case specification of a constant salinity flux is
1250	!-- forbidden.
1251	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1252	top_salinityflux /= 0.0 ) THEN
1253	message_string = 'boundary condition: bc_sa_t = "' // &
1254	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1255	'constant_top_salinityflux = .TRUE.'
1256	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1257	ENDIF
1258
1259	ENDIF
1260
1261	!
1262	!-- In case of humidity or passive scalar, set boundary conditions for total
1263	!-- water content / scalar
1264	IF ( humidity .OR. passive_scalar ) THEN
1265	IF ( humidity ) THEN
1266	sq = 'q'
1267	ELSE
1268	sq = 's'
1269	ENDIF
1270	IF ( bc_q_b == 'dirichlet' ) THEN
1271	ibc_q_b = 0
1272	ELSEIF ( bc_q_b == 'neumann' ) THEN
1273	ibc_q_b = 1
1274	ELSE
1275	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1276	'_b ="' // TRIM( bc_q_b ) // '"'
1277	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1278	ENDIF
1279	IF ( bc_q_t == 'dirichlet' ) THEN
1280	ibc_q_t = 0
1281	ELSEIF ( bc_q_t == 'neumann' ) THEN
1282	ibc_q_t = 1
1283	ELSE
1284	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1285	'_t ="' // TRIM( bc_q_t ) // '"'
1286	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1287	ENDIF
1288
1289	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1290
1291	!
1292	!-- A given surface humidity implies Dirichlet boundary condition for
1293	!-- humidity. In this case specification of a constant water flux is
1294	!-- forbidden.
1295	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1296	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1297	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1298	'th prescribed surface flux'
1299	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1300	ENDIF
1301	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1302	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1303	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1304	q_surface_initial_change
1305	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1306	ENDIF
1307
1308	ENDIF
1309
1310	!
1311	!-- Boundary conditions for horizontal components of wind speed
1312	IF ( bc_uv_b == 'dirichlet' ) THEN
1313	ibc_uv_b = 0
1314	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1315	ibc_uv_b = 1
1316	IF ( prandtl_layer ) THEN
1317	message_string = 'boundary condition: bc_uv_b = "' // &
1318	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1319	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1320	ENDIF
1321	ELSE
1322	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1323	TRIM( bc_uv_b ) // '"'
1324	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1325	ENDIF
1326
1327	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1328	bc_uv_t = 'neumann'
1329	ibc_uv_t = 1
1330	ELSE
1331	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1332	ibc_uv_t = 0
1333	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1334	ibc_uv_t = 1
1335	ELSE
1336	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1337	TRIM( bc_uv_t ) // '"'
1338	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1339	ENDIF
1340	ENDIF
1341
1342	!
1343	!-- Compute and check, respectively, the Rayleigh Damping parameter
1344	IF ( rayleigh_damping_factor == -1.0 ) THEN
1345	IF ( momentum_advec == 'ups-scheme' ) THEN
1346	rayleigh_damping_factor = 0.01
1347	ELSE
1348	rayleigh_damping_factor = 0.0
1349	ENDIF
1350	ELSE
1351	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1352	THEN
1353	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1354	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1355	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1356	ENDIF
1357	ENDIF
1358
1359	IF ( rayleigh_damping_height == -1.0 ) THEN
1360	IF ( .NOT. ocean ) THEN
1361	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1362	ELSE
1363	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1364	ENDIF
1365	ELSE
1366	IF ( .NOT. ocean ) THEN
1367	IF ( rayleigh_damping_height < 0.0 .OR. &
1368	rayleigh_damping_height > zu(nzt) ) THEN
1369	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1370	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1371	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1372	ENDIF
1373	ELSE
1374	IF ( rayleigh_damping_height > 0.0 .OR. &
1375	rayleigh_damping_height < zu(nzb) ) THEN
1376	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1377	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1378	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1379	ENDIF
1380	ENDIF
1381	ENDIF
1382
1383	!
1384	!-- Check limiters for Upstream-Spline scheme
1385	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1386	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1387	overshoot_limit_e < 0.0 ) THEN
1388	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1389	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1390	ENDIF
1391	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1392	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1393	message_string = 'ups_limit_... < 0.0 is not allowed'
1394	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1395	ENDIF
1396
1397	!
1398	!-- Check number of chosen statistic regions. More than 10 regions are not
1399	!-- allowed, because so far no more than 10 corresponding output files can
1400	!-- be opened (cf. check_open)
1401	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1402	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1403	statistic_regions+1, ' but only 10 regions are allowed'
1404	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1405	ENDIF
1406	IF ( normalizing_region > statistic_regions .OR. &
1407	normalizing_region < 0) THEN
1408	WRITE ( message_string, * ) 'normalizing_region = ', &
1409	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1410	' (value of statistic_regions)'
1411	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1412	ENDIF
1413
1414	!
1415	!-- Check the interval for sorting particles.
1416	!-- Using particles as cloud droplets requires sorting after each timestep.
1417	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1418	dt_sort_particles = 0.0
1419	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1420	'_droplets = .TRUE.'
1421	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1422	ENDIF
1423
1424	!
1425	!-- Set the default intervals for data output, if necessary
1426	!-- NOTE: dt_dosp has already been set in package_parin
1427	IF ( dt_data_output /= 9999999.9 ) THEN
1428	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1429	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1430	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1431	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1432	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1433	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1434	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1435	ENDIF
1436
1437	!
1438	!-- Set the default skip time intervals for data output, if necessary
1439	IF ( skip_time_dopr == 9999999.9 ) &
1440	skip_time_dopr = skip_time_data_output
1441	IF ( skip_time_dosp == 9999999.9 ) &
1442	skip_time_dosp = skip_time_data_output
1443	IF ( skip_time_do2d_xy == 9999999.9 ) &
1444	skip_time_do2d_xy = skip_time_data_output
1445	IF ( skip_time_do2d_xz == 9999999.9 ) &
1446	skip_time_do2d_xz = skip_time_data_output
1447	IF ( skip_time_do2d_yz == 9999999.9 ) &
1448	skip_time_do2d_yz = skip_time_data_output
1449	IF ( skip_time_do3d == 9999999.9 ) &
1450	skip_time_do3d = skip_time_data_output
1451	IF ( skip_time_data_output_av == 9999999.9 ) &
1452	skip_time_data_output_av = skip_time_data_output
1453
1454	!
1455	!-- Check the average intervals (first for 3d-data, then for profiles and
1456	!-- spectra)
1457	IF ( averaging_interval > dt_data_output_av ) THEN
1458	WRITE( message_string, * ) 'averaging_interval = ', &
1459	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1460	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1461	ENDIF
1462
1463	IF ( averaging_interval_pr == 9999999.9 ) THEN
1464	averaging_interval_pr = averaging_interval
1465	ENDIF
1466
1467	IF ( averaging_interval_pr > dt_dopr ) THEN
1468	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1469	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1470	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1471	ENDIF
1472
1473	IF ( averaging_interval_sp == 9999999.9 ) THEN
1474	averaging_interval_sp = averaging_interval
1475	ENDIF
1476
1477	IF ( averaging_interval_sp > dt_dosp ) THEN
1478	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1479	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1480	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1481	ENDIF
1482
1483	!
1484	!-- Set the default interval for profiles entering the temporal average
1485	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1486	dt_averaging_input_pr = dt_averaging_input
1487	ENDIF
1488
1489	!
1490	!-- Set the default interval for the output of timeseries to a reasonable
1491	!-- value (tries to minimize the number of calls of flow_statistics)
1492	IF ( dt_dots == 9999999.9 ) THEN
1493	IF ( averaging_interval_pr == 0.0 ) THEN
1494	dt_dots = MIN( dt_run_control, dt_dopr )
1495	ELSE
1496	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1497	ENDIF
1498	ENDIF
1499
1500	!
1501	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1502	IF ( dt_averaging_input > averaging_interval ) THEN
1503	WRITE( message_string, * ) 'dt_averaging_input = ', &
1504	dt_averaging_input, ' must be <= averaging_interval = ', &
1505	averaging_interval
1506	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1507	ENDIF
1508
1509	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1510	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1511	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1512	averaging_interval_pr
1513	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1514	ENDIF
1515
1516	!
1517	!-- Set the default value for the integration interval of precipitation amount
1518	IF ( precipitation ) THEN
1519	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1520	precipitation_amount_interval = dt_do2d_xy
1521	ELSE
1522	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1523	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1524	precipitation_amount_interval, ' must not be larger than ', &
1525	'dt_do2d_xy = ', dt_do2d_xy
1526	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1527	ENDIF
1528	ENDIF
1529	ENDIF
1530
1531	!
1532	!-- Determine the number of output profiles and check whether they are
1533	!-- permissible
1534	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1535
1536	dopr_n = dopr_n + 1
1537	i = dopr_n
1538
1539	!
1540	!-- Determine internal profile number (for hom, homs)
1541	!-- and store height levels
1542	SELECT CASE ( TRIM( data_output_pr(i) ) )
1543
1544	CASE ( 'u', '#u' )
1545	dopr_index(i) = 1
1546	dopr_unit(i) = 'm/s'
1547	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1548	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1549	dopr_initial_index(i) = 5
1550	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1551	data_output_pr(i) = data_output_pr(i)(2:)
1552	ENDIF
1553
1554	CASE ( 'v', '#v' )
1555	dopr_index(i) = 2
1556	dopr_unit(i) = 'm/s'
1557	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1558	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1559	dopr_initial_index(i) = 6
1560	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1561	data_output_pr(i) = data_output_pr(i)(2:)
1562	ENDIF
1563
1564	CASE ( 'w' )
1565	dopr_index(i) = 3
1566	dopr_unit(i) = 'm/s'
1567	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1568
1569	CASE ( 'pt', '#pt' )
1570	IF ( .NOT. cloud_physics ) THEN
1571	dopr_index(i) = 4
1572	dopr_unit(i) = 'K'
1573	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1574	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1575	dopr_initial_index(i) = 7
1576	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1577	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1578	data_output_pr(i) = data_output_pr(i)(2:)
1579	ENDIF
1580	ELSE
1581	dopr_index(i) = 43
1582	dopr_unit(i) = 'K'
1583	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1584	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1585	dopr_initial_index(i) = 28
1586	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1587	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1588	data_output_pr(i) = data_output_pr(i)(2:)
1589	ENDIF
1590	ENDIF
1591
1592	CASE ( 'e' )
1593	dopr_index(i) = 8
1594	dopr_unit(i) = 'm2/s2'
1595	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1596	hom(nzb,2,8,:) = 0.0
1597
1598	CASE ( 'km', '#km' )
1599	dopr_index(i) = 9
1600	dopr_unit(i) = 'm2/s'
1601	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1602	hom(nzb,2,9,:) = 0.0
1603	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1604	dopr_initial_index(i) = 23
1605	hom(:,2,23,:) = hom(:,2,9,:)
1606	data_output_pr(i) = data_output_pr(i)(2:)
1607	ENDIF
1608
1609	CASE ( 'kh', '#kh' )
1610	dopr_index(i) = 10
1611	dopr_unit(i) = 'm2/s'
1612	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1613	hom(nzb,2,10,:) = 0.0
1614	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1615	dopr_initial_index(i) = 24
1616	hom(:,2,24,:) = hom(:,2,10,:)
1617	data_output_pr(i) = data_output_pr(i)(2:)
1618	ENDIF
1619
1620	CASE ( 'l', '#l' )
1621	dopr_index(i) = 11
1622	dopr_unit(i) = 'm'
1623	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1624	hom(nzb,2,11,:) = 0.0
1625	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1626	dopr_initial_index(i) = 25
1627	hom(:,2,25,:) = hom(:,2,11,:)
1628	data_output_pr(i) = data_output_pr(i)(2:)
1629	ENDIF
1630
1631	CASE ( 'w"u"' )
1632	dopr_index(i) = 12
1633	dopr_unit(i) = 'm2/s2'
1634	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1635	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1636
1637	CASE ( 'wu' )
1638	dopr_index(i) = 13
1639	dopr_unit(i) = 'm2/s2'
1640	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1641
1642	CASE ( 'w"v"' )
1643	dopr_index(i) = 14
1644	dopr_unit(i) = 'm2/s2'
1645	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1646	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1647
1648	CASE ( 'wv' )
1649	dopr_index(i) = 15
1650	dopr_unit(i) = 'm2/s2'
1651	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1652
1653	CASE ( 'w"pt"' )
1654	dopr_index(i) = 16
1655	dopr_unit(i) = 'K m/s'
1656	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1657
1658	CASE ( 'wpt' )
1659	dopr_index(i) = 17
1660	dopr_unit(i) = 'K m/s'
1661	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1662
1663	CASE ( 'wpt' )
1664	dopr_index(i) = 18
1665	dopr_unit(i) = 'K m/s'
1666	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1667
1668	CASE ( 'wu' )
1669	dopr_index(i) = 19
1670	dopr_unit(i) = 'm2/s2'
1671	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1672	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1673
1674	CASE ( 'wv' )
1675	dopr_index(i) = 20
1676	dopr_unit(i) = 'm2/s2'
1677	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1678	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1679
1680	CASE ( 'wptBC' )
1681	dopr_index(i) = 21
1682	dopr_unit(i) = 'K m/s'
1683	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1684
1685	CASE ( 'wptBC' )
1686	dopr_index(i) = 22
1687	dopr_unit(i) = 'K m/s'
1688	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1689
1690	CASE ( 'sa', '#sa' )
1691	IF ( .NOT. ocean ) THEN
1692	message_string = 'data_output_pr = ' // &
1693	TRIM( data_output_pr(i) ) // ' is not imp' // &
1694	'lemented for ocean = .FALSE.'
1695	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1696	ELSE
1697	dopr_index(i) = 23
1698	dopr_unit(i) = 'psu'
1699	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1700	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1701	dopr_initial_index(i) = 26
1702	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1703	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1704	data_output_pr(i) = data_output_pr(i)(2:)
1705	ENDIF
1706	ENDIF
1707
1708	CASE ( 'u*2' )
1709	dopr_index(i) = 30
1710	dopr_unit(i) = 'm2/s2'
1711	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1712
1713	CASE ( 'v*2' )
1714	dopr_index(i) = 31
1715	dopr_unit(i) = 'm2/s2'
1716	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1717
1718	CASE ( 'w*2' )
1719	dopr_index(i) = 32
1720	dopr_unit(i) = 'm2/s2'
1721	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1722
1723	CASE ( 'pt*2' )
1724	dopr_index(i) = 33
1725	dopr_unit(i) = 'K2'
1726	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1727
1728	CASE ( 'e*' )
1729	dopr_index(i) = 34
1730	dopr_unit(i) = 'm2/s2'
1731	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1732
1733	CASE ( 'w2pt' )
1734	dopr_index(i) = 35
1735	dopr_unit(i) = 'K m2/s2'
1736	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1737
1738	CASE ( 'wpt2' )
1739	dopr_index(i) = 36
1740	dopr_unit(i) = 'K2 m/s'
1741	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1742
1743	CASE ( 'we' )
1744	dopr_index(i) = 37
1745	dopr_unit(i) = 'm3/s3'
1746	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1747
1748	CASE ( 'w*3' )
1749	dopr_index(i) = 38
1750	dopr_unit(i) = 'm3/s3'
1751	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1752
1753	CASE ( 'Sw' )
1754	dopr_index(i) = 39
1755	dopr_unit(i) = 'none'
1756	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1757
1758	CASE ( 'p' )
1759	dopr_index(i) = 40
1760	dopr_unit(i) = 'Pa'
1761	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1762
1763	CASE ( 'q', '#q' )
1764	IF ( .NOT. humidity ) THEN
1765	message_string = 'data_output_pr = ' // &
1766	TRIM( data_output_pr(i) ) // ' is not imp' // &
1767	'lemented for humidity = .FALSE.'
1768	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1769	ELSE
1770	dopr_index(i) = 41
1771	dopr_unit(i) = 'kg/kg'
1772	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1773	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1774	dopr_initial_index(i) = 26
1775	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1776	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1777	data_output_pr(i) = data_output_pr(i)(2:)
1778	ENDIF
1779	ENDIF
1780
1781	CASE ( 's', '#s' )
1782	IF ( .NOT. passive_scalar ) THEN
1783	message_string = 'data_output_pr = ' // &
1784	TRIM( data_output_pr(i) ) // ' is not imp' // &
1785	'lemented for passive_scalar = .FALSE.'
1786	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1787	ELSE
1788	dopr_index(i) = 41
1789	dopr_unit(i) = 'kg/m3'
1790	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1791	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1792	dopr_initial_index(i) = 26
1793	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1794	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1795	data_output_pr(i) = data_output_pr(i)(2:)
1796	ENDIF
1797	ENDIF
1798
1799	CASE ( 'qv', '#qv' )
1800	IF ( .NOT. cloud_physics ) THEN
1801	dopr_index(i) = 41
1802	dopr_unit(i) = 'kg/kg'
1803	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1804	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1805	dopr_initial_index(i) = 26
1806	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1807	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1808	data_output_pr(i) = data_output_pr(i)(2:)
1809	ENDIF
1810	ELSE
1811	dopr_index(i) = 42
1812	dopr_unit(i) = 'kg/kg'
1813	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1814	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1815	dopr_initial_index(i) = 27
1816	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1817	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1818	data_output_pr(i) = data_output_pr(i)(2:)
1819	ENDIF
1820	ENDIF
1821
1822	CASE ( 'lpt', '#lpt' )
1823	IF ( .NOT. cloud_physics ) THEN
1824	message_string = 'data_output_pr = ' // &
1825	TRIM( data_output_pr(i) ) // ' is not imp' // &
1826	'lemented for cloud_physics = .FALSE.'
1827	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1828	ELSE
1829	dopr_index(i) = 4
1830	dopr_unit(i) = 'K'
1831	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1832	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1833	dopr_initial_index(i) = 7
1834	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1835	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1836	data_output_pr(i) = data_output_pr(i)(2:)
1837	ENDIF
1838	ENDIF
1839
1840	CASE ( 'vpt', '#vpt' )
1841	dopr_index(i) = 44
1842	dopr_unit(i) = 'K'
1843	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1844	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1845	dopr_initial_index(i) = 29
1846	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1847	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1848	data_output_pr(i) = data_output_pr(i)(2:)
1849	ENDIF
1850
1851	CASE ( 'w"vpt"' )
1852	dopr_index(i) = 45
1853	dopr_unit(i) = 'K m/s'
1854	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1855
1856	CASE ( 'wvpt' )
1857	dopr_index(i) = 46
1858	dopr_unit(i) = 'K m/s'
1859	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1860
1861	CASE ( 'wvpt' )
1862	dopr_index(i) = 47
1863	dopr_unit(i) = 'K m/s'
1864	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1865
1866	CASE ( 'w"q"' )
1867	IF ( .NOT. humidity ) THEN
1868	message_string = 'data_output_pr = ' // &
1869	TRIM( data_output_pr(i) ) // ' is not imp' // &
1870	'lemented for humidity = .FALSE.'
1871	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1872	ELSE
1873	dopr_index(i) = 48
1874	dopr_unit(i) = 'kg/kg m/s'
1875	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1876	ENDIF
1877
1878	CASE ( 'wq' )
1879	IF ( .NOT. humidity ) THEN
1880	message_string = 'data_output_pr = ' // &
1881	TRIM( data_output_pr(i) ) // ' is not imp' // &
1882	'lemented for humidity = .FALSE.'
1883	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1884	ELSE
1885	dopr_index(i) = 49
1886	dopr_unit(i) = 'kg/kg m/s'
1887	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1888	ENDIF
1889
1890	CASE ( 'wq' )
1891	IF ( .NOT. humidity ) THEN
1892	message_string = 'data_output_pr = ' // &
1893	TRIM( data_output_pr(i) ) // ' is not imp' // &
1894	'lemented for humidity = .FALSE.'
1895	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1896	ELSE
1897	dopr_index(i) = 50
1898	dopr_unit(i) = 'kg/kg m/s'
1899	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1900	ENDIF
1901
1902	CASE ( 'w"s"' )
1903	IF ( .NOT. passive_scalar ) THEN
1904	message_string = 'data_output_pr = ' // &
1905	TRIM( data_output_pr(i) ) // ' is not imp' // &
1906	'lemented for passive_scalar = .FALSE.'
1907	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1908	ELSE
1909	dopr_index(i) = 48
1910	dopr_unit(i) = 'kg/m3 m/s'
1911	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1912	ENDIF
1913
1914	CASE ( 'ws' )
1915	IF ( .NOT. passive_scalar ) THEN
1916	message_string = 'data_output_pr = ' // &
1917	TRIM( data_output_pr(i) ) // ' is not imp' // &
1918	'lemented for passive_scalar = .FALSE.'
1919	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1920	ELSE
1921	dopr_index(i) = 49
1922	dopr_unit(i) = 'kg/m3 m/s'
1923	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1924	ENDIF
1925
1926	CASE ( 'ws' )
1927	IF ( .NOT. passive_scalar ) THEN
1928	message_string = 'data_output_pr = ' // &
1929	TRIM( data_output_pr(i) ) // ' is not imp' // &
1930	'lemented for passive_scalar = .FALSE.'
1931	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1932	ELSE
1933	dopr_index(i) = 50
1934	dopr_unit(i) = 'kg/m3 m/s'
1935	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1936	ENDIF
1937
1938	CASE ( 'w"qv"' )
1939	IF ( humidity .AND. .NOT. cloud_physics ) &
1940	THEN
1941	dopr_index(i) = 48
1942	dopr_unit(i) = 'kg/kg m/s'
1943	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1944	ELSEIF( humidity .AND. cloud_physics ) THEN
1945	dopr_index(i) = 51
1946	dopr_unit(i) = 'kg/kg m/s'
1947	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1948	ELSE
1949	message_string = 'data_output_pr = ' // &
1950	TRIM( data_output_pr(i) ) // ' is not imp' // &
1951	'lemented for cloud_physics = .FALSE. an&' // &
1952	'd humidity = .FALSE.'
1953	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1954	ENDIF
1955
1956	CASE ( 'wqv' )
1957	IF ( humidity .AND. .NOT. cloud_physics ) &
1958	THEN
1959	dopr_index(i) = 49
1960	dopr_unit(i) = 'kg/kg m/s'
1961	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1962	ELSEIF( humidity .AND. cloud_physics ) THEN
1963	dopr_index(i) = 52
1964	dopr_unit(i) = 'kg/kg m/s'
1965	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1966	ELSE
1967	message_string = 'data_output_pr = ' // &
1968	TRIM( data_output_pr(i) ) // ' is not imp' // &
1969	'lemented for cloud_physics = .FALSE. an&' // &
1970	'd humidity = .FALSE.'
1971	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1972	ENDIF
1973
1974	CASE ( 'wqv' )
1975	IF ( humidity .AND. .NOT. cloud_physics ) &
1976	THEN
1977	dopr_index(i) = 50
1978	dopr_unit(i) = 'kg/kg m/s'
1979	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1980	ELSEIF( humidity .AND. cloud_physics ) THEN
1981	dopr_index(i) = 53
1982	dopr_unit(i) = 'kg/kg m/s'
1983	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
1984	ELSE
1985	message_string = 'data_output_pr = ' // &
1986	TRIM( data_output_pr(i) ) // ' is not imp' // &
1987	'lemented for cloud_physics = .FALSE. an&' // &
1988	'd humidity = .FALSE.'
1989	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1990	ENDIF
1991
1992	CASE ( 'ql' )
1993	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
1994	message_string = 'data_output_pr = ' // &
1995	TRIM( data_output_pr(i) ) // ' is not imp' // &
1996	'lemented for cloud_physics = .FALSE. or' // &
1997	'&cloud_droplets = .FALSE.'
1998	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
1999	ELSE
2000	dopr_index(i) = 54
2001	dopr_unit(i) = 'kg/kg'
2002	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2003	ENDIF
2004
2005	CASE ( 'wuu*/dz' )
2006	dopr_index(i) = 55
2007	dopr_unit(i) = 'm2/s3'
2008	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2009
2010	CASE ( 'wp/dz' )
2011	dopr_index(i) = 56
2012	dopr_unit(i) = 'm2/s3'
2013	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2014
2015	CASE ( 'w"e/dz' )
2016	dopr_index(i) = 57
2017	dopr_unit(i) = 'm2/s3'
2018	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2019
2020	CASE ( 'u"pt"' )
2021	dopr_index(i) = 58
2022	dopr_unit(i) = 'K m/s'
2023	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2024
2025	CASE ( 'upt' )
2026	dopr_index(i) = 59
2027	dopr_unit(i) = 'K m/s'
2028	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2029
2030	CASE ( 'upt_t' )
2031	dopr_index(i) = 60
2032	dopr_unit(i) = 'K m/s'
2033	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2034
2035	CASE ( 'v"pt"' )
2036	dopr_index(i) = 61
2037	dopr_unit(i) = 'K m/s'
2038	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2039
2040	CASE ( 'vpt' )
2041	dopr_index(i) = 62
2042	dopr_unit(i) = 'K m/s'
2043	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2044
2045	CASE ( 'vpt_t' )
2046	dopr_index(i) = 63
2047	dopr_unit(i) = 'K m/s'
2048	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2049
2050	CASE ( 'rho' )
2051	dopr_index(i) = 64
2052	dopr_unit(i) = 'kg/m3'
2053	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2054
2055	CASE ( 'w"sa"' )
2056	IF ( .NOT. ocean ) THEN
2057	message_string = 'data_output_pr = ' // &
2058	TRIM( data_output_pr(i) ) // ' is not imp' // &
2059	'lemented for ocean = .FALSE.'
2060	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2061	ELSE
2062	dopr_index(i) = 65
2063	dopr_unit(i) = 'psu m/s'
2064	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2065	ENDIF
2066
2067	CASE ( 'wsa' )
2068	IF ( .NOT. ocean ) THEN
2069	message_string = 'data_output_pr = ' // &
2070	TRIM( data_output_pr(i) ) // ' is not imp' // &
2071	'lemented for ocean = .FALSE.'
2072	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2073	ELSE
2074	dopr_index(i) = 66
2075	dopr_unit(i) = 'psu m/s'
2076	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2077	ENDIF
2078
2079	CASE ( 'wsa' )
2080	IF ( .NOT. ocean ) THEN
2081	message_string = 'data_output_pr = ' // &
2082	TRIM( data_output_pr(i) ) // ' is not imp' // &
2083	'lemented for ocean = .FALSE.'
2084	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2085	ELSE
2086	dopr_index(i) = 67
2087	dopr_unit(i) = 'psu m/s'
2088	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2089	ENDIF
2090
2091	CASE ( 'wp' )
2092	dopr_index(i) = 68
2093	dopr_unit(i) = 'm3/s3'
2094	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2095
2096	CASE ( 'w"e' )
2097	dopr_index(i) = 69
2098	dopr_unit(i) = 'm3/s3'
2099	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2100
2101	CASE ( 'q*2' )
2102	IF ( .NOT. humidity ) THEN
2103	message_string = 'data_output_pr = ' // &
2104	TRIM( data_output_pr(i) ) // ' is not imp' // &
2105	'lemented for humidity = .FALSE.'
2106	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2107	ELSE
2108	dopr_index(i) = 70
2109	dopr_unit(i) = 'kg2/kg2'
2110	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2111	ENDIF
2112
2113	CASE DEFAULT
2114
2115	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2116
2117	IF ( unit == 'illegal' ) THEN
2118	IF ( data_output_pr_user(1) /= ' ' ) THEN
2119	message_string = 'illegal value for data_output_pr or ' // &
2120	'data_output_pr_user = "' // &
2121	TRIM( data_output_pr(i) ) // '"'
2122	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2123	ELSE
2124	message_string = 'illegal value for data_output_pr = "' // &
2125	TRIM( data_output_pr(i) ) // '"'
2126	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2127	ENDIF
2128	ENDIF
2129
2130	END SELECT
2131	!
2132	!-- Check to which of the predefined coordinate systems the profile belongs
2133	DO k = 1, crmax
2134	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2135	/=0 ) &
2136	THEN
2137	dopr_crossindex(i) = k
2138	EXIT
2139	ENDIF
2140	ENDDO
2141	!
2142	!-- Generate the text for the labels of the PROFIL output file. "-characters
2143	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2144	!-- control characters
2145	dopr_label(i) = data_output_pr(i)
2146	position = INDEX( dopr_label(i) , '"' )
2147	DO WHILE ( position /= 0 )
2148	dopr_label(i)(position:position) = ''''
2149	position = INDEX( dopr_label(i) , '"' )
2150	ENDDO
2151
2152	ENDDO
2153
2154	!
2155	!-- y-value range of the coordinate system (PROFIL).
2156	!-- x-value range determined in plot_1d.
2157	IF ( .NOT. ocean ) THEN
2158	cross_uymin = 0.0
2159	IF ( z_max_do1d == -1.0 ) THEN
2160	cross_uymax = zu(nzt+1)
2161	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2162	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2163	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2164	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2165	ELSE
2166	cross_uymax = z_max_do1d
2167	ENDIF
2168	ENDIF
2169
2170	!
2171	!-- Check whether the chosen normalizing factor for the coordinate systems is
2172	!-- permissible
2173	DO i = 1, crmax
2174	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2175
2176	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2177	j = 0
2178
2179	CASE DEFAULT
2180	message_string = 'unknown normalization method cross_normali' // &
2181	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2182	'"'
2183	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2184
2185	END SELECT
2186	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2187
2188	CASE ( '', 'z_i' )
2189	j = 0
2190
2191	CASE DEFAULT
2192	message_string = 'unknown normalization method cross_normali' // &
2193	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2194	'"'
2195	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2196
2197	END SELECT
2198	ENDDO
2199	!
2200	!-- Check normalized y-value range of the coordinate system (PROFIL)
2201	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2202	THEN
2203	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2204	z_max_do1d_normalized, ' must be >= 0.0'
2205	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2206	ENDIF
2207
2208
2209	!
2210	!-- Append user-defined data output variables to the standard data output
2211	IF ( data_output_user(1) /= ' ' ) THEN
2212	i = 1
2213	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2214	i = i + 1
2215	ENDDO
2216	j = 1
2217	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2218	IF ( i > 100 ) THEN
2219	message_string = 'number of output quantitities given by data' // &
2220	'_output and data_output_user exceeds the limit of 100'
2221	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2222	ENDIF
2223	data_output(i) = data_output_user(j)
2224	i = i + 1
2225	j = j + 1
2226	ENDDO
2227	ENDIF
2228
2229	!
2230	!-- Check and set steering parameters for 2d/3d data output and averaging
2231	i = 1
2232	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2233	!
2234	!-- Check for data averaging
2235	ilen = LEN_TRIM( data_output(i) )
2236	j = 0 ! no data averaging
2237	IF ( ilen > 3 ) THEN
2238	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2239	j = 1 ! data averaging
2240	data_output(i) = data_output(i)(1:ilen-3)
2241	ENDIF
2242	ENDIF
2243	!
2244	!-- Check for cross section or volume data
2245	ilen = LEN_TRIM( data_output(i) )
2246	k = 0 ! 3d data
2247	var = data_output(i)(1:ilen)
2248	IF ( ilen > 3 ) THEN
2249	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2250	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2251	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2252	k = 1 ! 2d data
2253	var = data_output(i)(1:ilen-3)
2254	ENDIF
2255	ENDIF
2256	!
2257	!-- Check for allowed value and set units
2258	SELECT CASE ( TRIM( var ) )
2259
2260	CASE ( 'e' )
2261	IF ( constant_diffusion ) THEN
2262	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2263	'res constant_diffusion = .FALSE.'
2264	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2265	ENDIF
2266	unit = 'm2/s2'
2267
2268	CASE ( 'pc', 'pr' )
2269	IF ( .NOT. particle_advection ) THEN
2270	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2271	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2272	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2273	ENDIF
2274	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2275	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2276
2277	CASE ( 'q', 'vpt' )
2278	IF ( .NOT. humidity ) THEN
2279	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2280	'res humidity = .TRUE.'
2281	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2282	ENDIF
2283	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2284	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2285
2286	CASE ( 'ql' )
2287	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2288	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2289	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2290	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2291	ENDIF
2292	unit = 'kg/kg'
2293
2294	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2295	IF ( .NOT. cloud_droplets ) THEN
2296	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2297	'res cloud_droplets = .TRUE.'
2298	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2299	ENDIF
2300	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2301	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2302	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2303
2304	CASE ( 'qv' )
2305	IF ( .NOT. cloud_physics ) THEN
2306	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2307	'res cloud_physics = .TRUE.'
2308	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2309	ENDIF
2310	unit = 'kg/kg'
2311
2312	CASE ( 'rho' )
2313	IF ( .NOT. ocean ) THEN
2314	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2315	'res ocean = .TRUE.'
2316	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2317	ENDIF
2318	unit = 'kg/m3'
2319
2320	CASE ( 's' )
2321	IF ( .NOT. passive_scalar ) THEN
2322	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2323	'res passive_scalar = .TRUE.'
2324	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2325	ENDIF
2326	unit = 'conc'
2327
2328	CASE ( 'sa' )
2329	IF ( .NOT. ocean ) THEN
2330	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2331	'res ocean = .TRUE.'
2332	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2333	ENDIF
2334	unit = 'psu'
2335
2336	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2337	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2338	message_string = 'illegal value for data_output: "' // &
2339	TRIM( var ) // '" & only 2d-horizontal ' // &
2340	'cross sections are allowed for this value'
2341	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2342	ENDIF
2343	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2344	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2345	'res cloud_physics = .TRUE.'
2346	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2347	ENDIF
2348	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2349	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2350	'res precipitation = .TRUE.'
2351	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2352	ENDIF
2353	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2354	message_string = 'temporal averaging of precipitation ' // &
2355	'amount "' // TRIM( var ) // '" is not possible'
2356	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2357	ENDIF
2358	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2359	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2360	'res precipitation = .TRUE.'
2361	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2362	ENDIF
2363
2364
2365	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2366	IF ( TRIM( var ) == 't*' ) unit = 'K'
2367	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2368	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2369	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2370	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2371
2372	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2373	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2374	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2375	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2376	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2377	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2378	CONTINUE
2379
2380	CASE DEFAULT
2381	CALL user_check_data_output( var, unit )
2382
2383	IF ( unit == 'illegal' ) THEN
2384	IF ( data_output_user(1) /= ' ' ) THEN
2385	message_string = 'illegal value for data_output or ' // &
2386	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2387	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2388	ELSE
2389	message_string = 'illegal value for data_output =' // &
2390	TRIM( data_output(i) ) // '"'
2391	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2392	ENDIF
2393	ENDIF
2394
2395	END SELECT
2396	!
2397	!-- Set the internal steering parameters appropriately
2398	IF ( k == 0 ) THEN
2399	do3d_no(j) = do3d_no(j) + 1
2400	do3d(j,do3d_no(j)) = data_output(i)
2401	do3d_unit(j,do3d_no(j)) = unit
2402	ELSE
2403	do2d_no(j) = do2d_no(j) + 1
2404	do2d(j,do2d_no(j)) = data_output(i)
2405	do2d_unit(j,do2d_no(j)) = unit
2406	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2407	data_output_xy(j) = .TRUE.
2408	ENDIF
2409	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2410	data_output_xz(j) = .TRUE.
2411	ENDIF
2412	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2413	data_output_yz(j) = .TRUE.
2414	ENDIF
2415	ENDIF
2416
2417	IF ( j == 1 ) THEN
2418	!
2419	!-- Check, if variable is already subject to averaging
2420	found = .FALSE.
2421	DO k = 1, doav_n
2422	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2423	ENDDO
2424
2425	IF ( .NOT. found ) THEN
2426	doav_n = doav_n + 1
2427	doav(doav_n) = var
2428	ENDIF
2429	ENDIF
2430
2431	i = i + 1
2432	ENDDO
2433
2434	!
2435	!-- Store sectional planes in one shared array
2436	section(:,1) = section_xy
2437	section(:,2) = section_xz
2438	section(:,3) = section_yz
2439
2440	!
2441	!-- Upper plot limit (grid point value) for 1D profiles
2442	IF ( z_max_do1d == -1.0 ) THEN
2443	nz_do1d = nzt+1
2444	ELSE
2445	DO k = nzb+1, nzt+1
2446	nz_do1d = k
2447	IF ( zw(k) > z_max_do1d ) EXIT
2448	ENDDO
2449	ENDIF
2450
2451	!
2452	!-- Upper plot limit for 2D vertical sections
2453	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2454	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2455	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2456	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2457	' (zu(nzt))'
2458	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2459	ENDIF
2460
2461	!
2462	!-- Upper plot limit for 3D arrays
2463	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2464
2465	!
2466	!-- Determine and check accuracy for compressed 3D plot output
2467	IF ( do3d_compress ) THEN
2468	!
2469	!-- Compression only permissible on T3E machines
2470	IF ( host(1:3) /= 't3e' ) THEN
2471	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2472	TRIM( host ) // '"'
2473	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2474	ENDIF
2475
2476	i = 1
2477	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2478
2479	ilen = LEN_TRIM( do3d_comp_prec(i) )
2480	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2481	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2482	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2483	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2484	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2485	ENDIF
2486
2487	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2488	var = do3d_comp_prec(i)(1:ilen-1)
2489
2490	SELECT CASE ( var )
2491
2492	CASE ( 'u' )
2493	j = 1
2494	CASE ( 'v' )
2495	j = 2
2496	CASE ( 'w' )
2497	j = 3
2498	CASE ( 'p' )
2499	j = 4
2500	CASE ( 'pt' )
2501	j = 5
2502
2503	CASE DEFAULT
2504	WRITE( message_string, * ) 'unknown variable "', &
2505	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2506	i, ')'
2507	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2508
2509	END SELECT
2510
2511	plot_3d_precision(j)%precision = prec
2512	i = i + 1
2513
2514	ENDDO
2515	ENDIF
2516
2517	!
2518	!-- Check the data output format(s)
2519	IF ( data_output_format(1) == ' ' ) THEN
2520	!
2521	!-- Default value
2522	netcdf_output = .TRUE.
2523	ELSE
2524	i = 1
2525	DO WHILE ( data_output_format(i) /= ' ' )
2526
2527	SELECT CASE ( data_output_format(i) )
2528
2529	CASE ( 'netcdf' )
2530	netcdf_output = .TRUE.
2531	CASE ( 'iso2d' )
2532	iso2d_output = .TRUE.
2533	CASE ( 'profil' )
2534	profil_output = .TRUE.
2535	CASE ( 'avs' )
2536	avs_output = .TRUE.
2537
2538	CASE DEFAULT
2539	message_string = 'unknown value for data_output_format "' // &
2540	TRIM( data_output_format(i) ) // '"'
2541	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2542
2543	END SELECT
2544
2545	i = i + 1
2546	IF ( i > 10 ) EXIT
2547
2548	ENDDO
2549
2550	ENDIF
2551
2552	!
2553	!-- Check netcdf precison
2554	ldum = .FALSE.
2555	CALL define_netcdf_header( 'ch', ldum, 0 )
2556
2557	!
2558	!-- Check, whether a constant diffusion coefficient shall be used
2559	IF ( km_constant /= -1.0 ) THEN
2560	IF ( km_constant < 0.0 ) THEN
2561	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2562	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2563	ELSE
2564	IF ( prandtl_number < 0.0 ) THEN
2565	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2566	' < 0.0'
2567	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2568	ENDIF
2569	constant_diffusion = .TRUE.
2570
2571	IF ( prandtl_layer ) THEN
2572	message_string = 'prandtl_layer is not allowed with fixed ' // &
2573	'value of km'
2574	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2575	ENDIF
2576	ENDIF
2577	ENDIF
2578
2579	!
2580	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2581	!-- for the horizontal diffusivity used within the outflow damping layer,
2582	!-- and check/set the width of the damping layer
2583	IF ( bc_lr /= 'cyclic' ) THEN
2584	IF ( km_damp_max == -1.0 ) THEN
2585	km_damp_max = 0.5 * dx
2586	ENDIF
2587	IF ( outflow_damping_width == -1.0 ) THEN
2588	outflow_damping_width = MIN( 20, nx/2 )
2589	ENDIF
2590	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2591	message_string = 'outflow_damping width out of range'
2592	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2593	ENDIF
2594	ENDIF
2595
2596	IF ( bc_ns /= 'cyclic' ) THEN
2597	IF ( km_damp_max == -1.0 ) THEN
2598	km_damp_max = 0.5 * dy
2599	ENDIF
2600	IF ( outflow_damping_width == -1.0 ) THEN
2601	outflow_damping_width = MIN( 20, ny/2 )
2602	ENDIF
2603	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2604	message_string = 'outflow_damping width out of range'
2605	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2606	ENDIF
2607	ENDIF
2608
2609	!
2610	!-- Check value range for rif
2611	IF ( rif_min >= rif_max ) THEN
2612	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2613	'than rif_max = ', rif_max
2614	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2615	ENDIF
2616
2617	!
2618	!-- Determine upper and lower hight level indices for random perturbations
2619	IF ( disturbance_level_b == -9999999.9 ) THEN
2620	IF ( ocean ) THEN
2621	disturbance_level_b = zu((nzt*2)/3)
2622	disturbance_level_ind_b = ( nzt * 2 ) / 3
2623	ELSE
2624	disturbance_level_b = zu(nzb+3)
2625	disturbance_level_ind_b = nzb + 3
2626	ENDIF
2627	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2628	WRITE( message_string, * ) 'disturbance_level_b = ', &
2629	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2630	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2631	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2632	WRITE( message_string, * ) 'disturbance_level_b = ', &
2633	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2634	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2635	ELSE
2636	DO k = 3, nzt-2
2637	IF ( disturbance_level_b <= zu(k) ) THEN
2638	disturbance_level_ind_b = k
2639	EXIT
2640	ENDIF
2641	ENDDO
2642	ENDIF
2643
2644	IF ( disturbance_level_t == -9999999.9 ) THEN
2645	IF ( ocean ) THEN
2646	disturbance_level_t = zu(nzt-3)
2647	disturbance_level_ind_t = nzt - 3
2648	ELSE
2649	disturbance_level_t = zu(nzt/3)
2650	disturbance_level_ind_t = nzt / 3
2651	ENDIF
2652	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2653	WRITE( message_string, * ) 'disturbance_level_t = ', &
2654	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2655	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2656	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2657	WRITE( message_string, * ) 'disturbance_level_t = ', &
2658	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2659	disturbance_level_b
2660	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2661	ELSE
2662	DO k = 3, nzt-2
2663	IF ( disturbance_level_t <= zu(k) ) THEN
2664	disturbance_level_ind_t = k
2665	EXIT
2666	ENDIF
2667	ENDDO
2668	ENDIF
2669
2670	!
2671	!-- Check again whether the levels determined this way are ok.
2672	!-- Error may occur at automatic determination and too few grid points in
2673	!-- z-direction.
2674	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2675	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2676	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2677	disturbance_level_b
2678	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2679	ENDIF
2680
2681	!
2682	!-- Determine the horizontal index range for random perturbations.
2683	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2684	!-- near the inflow and the perturbation area is further limited to ...(1)
2685	!-- after the initial phase of the flow.
2686	dist_nxl = 0; dist_nxr = nx
2687	dist_nys = 0; dist_nyn = ny
2688	IF ( bc_lr /= 'cyclic' ) THEN
2689	IF ( inflow_disturbance_begin == -1 ) THEN
2690	inflow_disturbance_begin = MIN( 10, nx/2 )
2691	ENDIF
2692	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2693	THEN
2694	message_string = 'inflow_disturbance_begin out of range'
2695	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2696	ENDIF
2697	IF ( inflow_disturbance_end == -1 ) THEN
2698	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2699	ENDIF
2700	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2701	THEN
2702	message_string = 'inflow_disturbance_end out of range'
2703	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2704	ENDIF
2705	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2706	IF ( inflow_disturbance_begin == -1 ) THEN
2707	inflow_disturbance_begin = MIN( 10, ny/2 )
2708	ENDIF
2709	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2710	THEN
2711	message_string = 'inflow_disturbance_begin out of range'
2712	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2713	ENDIF
2714	IF ( inflow_disturbance_end == -1 ) THEN
2715	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2716	ENDIF
2717	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2718	THEN
2719	message_string = 'inflow_disturbance_end out of range'
2720	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2721	ENDIF
2722	ENDIF
2723
2724	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2725	dist_nxr = nx - inflow_disturbance_begin
2726	dist_nxl(1) = nx - inflow_disturbance_end
2727	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2728	dist_nxl = inflow_disturbance_begin
2729	dist_nxr(1) = inflow_disturbance_end
2730	ENDIF
2731	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2732	dist_nyn = ny - inflow_disturbance_begin
2733	dist_nys(1) = ny - inflow_disturbance_end
2734	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2735	dist_nys = inflow_disturbance_begin
2736	dist_nyn(1) = inflow_disturbance_end
2737	ENDIF
2738
2739	!
2740	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2741	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2742	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2743	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2744	'condition at the inflow boundary'
2745	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2746	ENDIF
2747
2748	!
2749	!-- In case of turbulent inflow calculate the index of the recycling plane
2750	IF ( turbulent_inflow ) THEN
2751	IF ( recycling_width == 9999999.9 ) THEN
2752	!
2753	!-- Set the default value for the width of the recycling domain
2754	recycling_width = 0.1 * nx * dx
2755	ELSE
2756	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2757	WRITE( message_string, * ) 'illegal value for recycling_width:', &
2758	' ', recycling_width
2759	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2760	ENDIF
2761	ENDIF
2762	!
2763	!-- Calculate the index
2764	recycling_plane = recycling_width / dx
2765	ENDIF
2766
2767	!
2768	!-- Check random generator
2769	IF ( random_generator /= 'system-specific' .AND. &
2770	random_generator /= 'numerical-recipes' ) THEN
2771	message_string = 'unknown random generator: random_generator = "' // &
2772	TRIM( random_generator ) // '"'
2773	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2774	ENDIF
2775
2776	!
2777	!-- Determine damping level index for 1D model
2778	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2779	IF ( damp_level_1d == -1.0 ) THEN
2780	damp_level_1d = zu(nzt+1)
2781	damp_level_ind_1d = nzt + 1
2782	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2783	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2784	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
2785	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
2786	ELSE
2787	DO k = 1, nzt+1
2788	IF ( damp_level_1d <= zu(k) ) THEN
2789	damp_level_ind_1d = k
2790	EXIT
2791	ENDIF
2792	ENDDO
2793	ENDIF
2794	ENDIF
2795
2796	!
2797	!-- Check some other 1d-model parameters
2798	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2799	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2800	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
2801	'" is unknown'
2802	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
2803	ENDIF
2804	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2805	TRIM( dissipation_1d ) /= 'detering' ) THEN
2806	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
2807	'" is unknown'
2808	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
2809	ENDIF
2810
2811	!
2812	!-- Set time for the next user defined restart (time_restart is the
2813	!-- internal parameter for steering restart events)
2814	IF ( restart_time /= 9999999.9 ) THEN
2815	IF ( restart_time > simulated_time ) time_restart = restart_time
2816	ELSE
2817	!
2818	!-- In case of a restart run, set internal parameter to default (no restart)
2819	!-- if the NAMELIST-parameter restart_time is omitted
2820	time_restart = 9999999.9
2821	ENDIF
2822
2823	!
2824	!-- Set default value of the time needed to terminate a model run
2825	IF ( termination_time_needed == -1.0 ) THEN
2826	IF ( host(1:3) == 'ibm' ) THEN
2827	termination_time_needed = 300.0
2828	ELSE
2829	termination_time_needed = 35.0
2830	ENDIF
2831	ENDIF
2832
2833	!
2834	!-- Check the time needed to terminate a model run
2835	IF ( host(1:3) == 't3e' ) THEN
2836	!
2837	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2838	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2839	IF ( termination_time_needed <= 30.0 ) THEN
2840	WRITE( message_string, * ) 'termination_time_needed = ', &
2841	termination_time_needed, ' must be > 30.0 on host "', &
2842	TRIM( host ), '"'
2843	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
2844	ENDIF
2845	ELSEIF ( host(1:3) == 'ibm' ) THEN
2846	!
2847	!-- On IBM-regatta machines the time should be at least 300 seconds,
2848	!-- because the job time consumed before executing palm (for compiling,
2849	!-- copying of files, etc.) has to be regarded
2850	IF ( termination_time_needed < 300.0 ) THEN
2851	WRITE( message_string, * ) 'termination_time_needed = ', &
2852	termination_time_needed, ' should be >= 300.0 on host "', &
2853	TRIM( host ), '"'
2854	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
2855	ENDIF
2856	ENDIF
2857
2858	!
2859	!-- Check pressure gradient conditions
2860	IF ( dp_external .AND. conserve_volume_flow ) THEN
2861	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
2862	' are .TRUE. but one of them must be .FALSE.'
2863	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
2864	ENDIF
2865	IF ( dp_external ) THEN
2866	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
2867	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
2868	' of range'
2869	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
2870	ENDIF
2871	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
2872	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
2873	', i.e. the external pressure gradient & will not be applied'
2874	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
2875	ENDIF
2876	ENDIF
2877	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
2878	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
2879	'.FALSE., i.e. the external pressure gradient & will not be applied'
2880	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
2881	ENDIF
2882	IF ( conserve_volume_flow ) THEN
2883	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
2884	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
2885	conserve_volume_flow_mode = 'inflow_profile'
2886	ELSE
2887	conserve_volume_flow_mode = 'initial_profiles'
2888	ENDIF
2889	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
2890	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
2891	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
2892	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
2893	conserve_volume_flow_mode
2894	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
2895	ENDIF
2896	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
2897	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
2898	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
2899	'require & conserve_volume_flow_mode = ''inflow_profile'''
2900	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
2901	ENDIF
2902	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
2903	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
2904	WRITE( message_string, * ) 'cyclic boundary conditions ', &
2905	'require & conserve_volume_flow_mode = ''initial_profiles''', &
2906	' or ''bulk_velocity'''
2907	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
2908	ENDIF
2909	ENDIF
2910	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
2911	( .NOT. conserve_volume_flow .OR. &
2912	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
2913	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
2914	'conserve_volume_flow = .T. and & ', &
2915	'conserve_volume_flow_mode = ''bulk_velocity'''
2916	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
2917	ENDIF
2918
2919	!
2920	!-- Check particle attributes
2921	IF ( particle_color /= 'none' ) THEN
2922	IF ( particle_color /= 'absuv' .AND. particle_color /= 'pt*' .AND. &
2923	particle_color /= 'z' ) THEN
2924	message_string = 'illegal value for parameter particle_color: ' // &
2925	TRIM( particle_color)
2926	CALL message( 'check_parameters', 'PA0313', 1, 2, 0, 6, 0 )
2927	ELSE
2928	IF ( color_interval(2) <= color_interval(1) ) THEN
2929	message_string = 'color_interval(2) <= color_interval(1)'
2930	CALL message( 'check_parameters', 'PA0315', 1, 2, 0, 6, 0 )
2931	ENDIF
2932	ENDIF
2933	ENDIF
2934
2935	IF ( particle_dvrpsize /= 'none' ) THEN
2936	IF ( particle_dvrpsize /= 'absw' ) THEN
2937	message_string = 'illegal value for parameter particle_dvrpsize:' // &
2938	' ' // TRIM( particle_color)
2939	CALL message( 'check_parameters', 'PA0314', 1, 2, 0, 6, 0 )
2940	ELSE
2941	IF ( dvrpsize_interval(2) <= dvrpsize_interval(1) ) THEN
2942	message_string = 'dvrpsize_interval(2) <= dvrpsize_interval(1)'
2943	CALL message( 'check_parameters', 'PA0316', 1, 2, 0, 6, 0 )
2944	ENDIF
2945	ENDIF
2946	ENDIF
2947
2948	!
2949	!-- Check &userpar parameters
2950	CALL user_check_parameters
2951
2952
2953	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |