Home

Context Navigation

source: palm/trunk/SOURCE/check_parameters.f90 @ 259

Last change on this file since 259 was 256, checked in by letzel, 16 years ago
topography_grid_convention moved from userpar to inipar documentation and examples updated
Property svn:keywords set to `Id`
File size: 114.3 KB

Line
1	SUBROUTINE check_parameters
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Bugfix: pressure included for profile output
7	! Check pressure gradient conditions
8	! topography_grid_convention moved from user_check_parameters
9	! 'single_street_canyon'
10	!
11	! Former revisions:
12	! -----------------
13	! $Id: check_parameters.f90 256 2009-03-08 08:56:27Z raasch $
14	!
15	! 222 2009-01-12 16:04:16Z letzel
16	! +user_check_parameters
17	! Output of messages replaced by message handling routine.
18	! Implementation of an MPI-1 coupling: replaced myid with target_id,
19	! deleted __mpi2 directives
20	! Check that PALM is called with mrun -K parallel for coupling
21	!
22	! 197 2008-09-16 15:29:03Z raasch
23	! Bug fix: Construction of vertical profiles when 10 gradients have been
24	! specified in the parameter list (ug, vg, pt, q, sa, lad)
25	!
26	! Strict grid matching along z is not needed for mg-solver.
27	! Leaf area density (LAD) explicitly set to its surface value at k=0
28	! Case of reading data for recycling included in initializing_actions,
29	! check of turbulent_inflow and calculation of recycling_plane.
30	! q*2 profile added
31	!
32	! 138 2007-11-28 10:03:58Z letzel
33	! Plant canopy added
34	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
35	! Multigrid solver allows topography, checking of dt_sort_particles
36	! Bugfix: initializing u_init and v_init in case of ocean runs
37	!
38	! 109 2007-08-28 15:26:47Z letzel
39	! Check coupling_mode and set default (obligatory) values (like boundary
40	! conditions for temperature and fluxes) in case of coupled runs.
41	! +profiles for wp and w"e
42	! Bugfix: Error message concerning output of particle concentration (pc)
43	! modified
44	! More checks and more default values for coupled runs
45	! allow data_output_pr= q, wq, w"q", wq for humidity = .T. (instead of
46	! cloud_physics = .T.)
47	! Rayleigh damping for ocean fixed.
48	! Check and, if necessary, set default value for dt_coupling
49	!
50	! 97 2007-06-21 08:23:15Z raasch
51	! Initial salinity profile is calculated, salinity boundary conditions are
52	! checked,
53	! z_max_do1d is checked only in case of ocean = .f.,
54	! +initial temperature and geostrophic velocity profiles for the ocean version,
55	! use_pt_reference renamed use_reference
56	!
57	! 89 2007-05-25 12:08:31Z raasch
58	! Check for user-defined profiles
59	!
60	! 75 2007-03-22 09:54:05Z raasch
61	! "by_user" allowed as initializing action, -data_output_ts,
62	! leapfrog with non-flat topography not allowed any more, loop_optimization
63	! and pt_reference are checked, moisture renamed humidity,
64	! output of precipitation amount/rate and roughnes length + check
65	! possible negative humidities are avoided in initial profile,
66	! dirichlet/neumann changed to dirichlet/radiation, etc.,
67	! revision added to run_description_header
68	!
69	! 20 2007-02-26 00:12:32Z raasch
70	! Temperature and humidity gradients at top are now calculated for nzt+1,
71	! top_heatflux and respective boundary condition bc_pt_t is checked
72	!
73	! RCS Log replace by Id keyword, revision history cleaned up
74	!
75	! Revision 1.61 2006/08/04 14:20:25 raasch
76	! do2d_unit and do3d_unit now defined as 2d-arrays, check of
77	! use_upstream_for_tke, default value for dt_dopts,
78	! generation of file header moved from routines palm and header to here
79	!
80	! Revision 1.1 1997/08/26 06:29:23 raasch
81	! Initial revision
82	!
83	!
84	! Description:
85	! ------------
86	! Check control parameters and deduce further quantities.
87	!------------------------------------------------------------------------------!
88
89	USE arrays_3d
90	USE constants
91	USE control_parameters
92	USE grid_variables
93	USE indices
94	USE model_1d
95	USE netcdf_control
96	USE particle_attributes
97	USE pegrid
98	USE profil_parameter
99	USE statistics
100	USE transpose_indices
101
102	IMPLICIT NONE
103
104	CHARACTER (LEN=1) :: sq
105	CHARACTER (LEN=6) :: var
106	CHARACTER (LEN=7) :: unit
107	CHARACTER (LEN=8) :: date
108	CHARACTER (LEN=10) :: time
109	CHARACTER (LEN=40) :: coupling_string
110	CHARACTER (LEN=100) :: action
111
112	INTEGER :: i, ilen, intervals, iremote = 0, iter, j, k, nnxh, nnyh, &
113	position, prec
114	LOGICAL :: found, ldum
115	REAL :: gradient, maxn, maxp, remote = 0.0
116
117	!
118	!-- Warning, if host is not set
119	IF ( host(1:1) == ' ' ) THEN
120	message_string = '"host" is not set. Please check that environment ' // &
121	'variable "localhost" & is set before running PALM'
122	CALL message( 'check_parameters', 'PA0001', 0, 0, 0, 6, 0 )
123	ENDIF
124
125	!
126	!-- Check the coupling mode
127	IF ( coupling_mode /= 'uncoupled' .AND. &
128	coupling_mode /= 'atmosphere_to_ocean' .AND. &
129	coupling_mode /= 'ocean_to_atmosphere' ) THEN
130	message_string = 'illegal coupling mode: ' // TRIM( coupling_mode )
131	CALL message( 'check_parameters', 'PA0002', 1, 2, 0, 6, 0 )
132	ENDIF
133
134	!
135	!-- Check dt_coupling, restart_time, dt_restart, end_time, dx, dy, nx and ny
136	IF ( coupling_mode /= 'uncoupled' ) THEN
137
138	IF ( dt_coupling == 9999999.9 ) THEN
139	message_string = 'dt_coupling is not set but required for coup' // &
140	'ling mode "' // TRIM( coupling_mode ) // '"'
141	CALL message( 'check_parameters', 'PA0003', 1, 2, 0, 6, 0 )
142	ENDIF
143
144	#if defined( __parallel )
145	CALL MPI_SEND( dt_coupling, 1, MPI_REAL, target_id, 11, comm_inter, &
146	ierr )
147	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 11, comm_inter, &
148	status, ierr )
149	IF ( dt_coupling /= remote ) THEN
150	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
151	'": dt_coupling = ', dt_coupling, '& is not equal to ', &
152	'dt_coupling_remote = ', remote
153	CALL message( 'check_parameters', 'PA0004', 1, 2, 0, 6, 0 )
154	ENDIF
155	IF ( dt_coupling <= 0.0 ) THEN
156	CALL MPI_SEND( dt_max, 1, MPI_REAL, target_id, 19, comm_inter, ierr )
157	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 19, comm_inter, &
158	status, ierr )
159	dt_coupling = MAX( dt_max, remote )
160	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
161	'": dt_coupling <= 0.0 & is not allowed and is reset to ', &
162	'MAX(dt_max(A,O)) = ', dt_coupling
163	CALL message( 'check_parameters', 'PA0005', 0, 1, 0, 6, 0 )
164	ENDIF
165
166	CALL MPI_SEND( restart_time, 1, MPI_REAL, target_id, 12, comm_inter, &
167	ierr )
168	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 12, comm_inter, &
169	status, ierr )
170	IF ( restart_time /= remote ) THEN
171	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
172	'": restart_time = ', restart_time, '& is not equal to ', &
173	'restart_time_remote = ', remote
174	CALL message( 'check_parameters', 'PA0006', 1, 2, 0, 6, 0 )
175	ENDIF
176
177	CALL MPI_SEND( dt_restart, 1, MPI_REAL, target_id, 13, comm_inter, &
178	ierr )
179	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 13, comm_inter, &
180	status, ierr )
181	IF ( dt_restart /= remote ) THEN
182	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
183	'": dt_restart = ', dt_restart, '& is not equal to ', &
184	'dt_restart_remote = ', remote
185	CALL message( 'check_parameters', 'PA0007', 1, 2, 0, 6, 0 )
186	ENDIF
187
188	CALL MPI_SEND( end_time, 1, MPI_REAL, target_id, 14, comm_inter, ierr )
189	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 14, comm_inter, &
190	status, ierr )
191	IF ( end_time /= remote ) THEN
192	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
193	'": end_time = ', end_time, '& is not equal to ', &
194	'end_time_remote = ', remote
195	CALL message( 'check_parameters', 'PA0008', 1, 2, 0, 6, 0 )
196	ENDIF
197
198	CALL MPI_SEND( dx, 1, MPI_REAL, target_id, 15, comm_inter, ierr )
199	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 15, comm_inter, &
200	status, ierr )
201	IF ( dx /= remote ) THEN
202	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
203	'": dx = ', dx, '& is not equal to dx_remote = ', remote
204	CALL message( 'check_parameters', 'PA0009', 1, 2, 0, 6, 0 )
205	ENDIF
206
207	CALL MPI_SEND( dy, 1, MPI_REAL, target_id, 16, comm_inter, ierr )
208	CALL MPI_RECV( remote, 1, MPI_REAL, target_id, 16, comm_inter, &
209	status, ierr )
210	IF ( dy /= remote ) THEN
211	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
212	'": dy = ', dy, '& is not equal to dy_remote = ', remote
213	CALL message( 'check_parameters', 'PA0010', 1, 2, 0, 6, 0 )
214	ENDIF
215
216	CALL MPI_SEND( nx, 1, MPI_INTEGER, target_id, 17, comm_inter, ierr )
217	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 17, comm_inter, &
218	status, ierr )
219	IF ( nx /= iremote ) THEN
220	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
221	'": nx = ', nx, '& is not equal to nx_remote = ', iremote
222	CALL message( 'check_parameters', 'PA0011', 1, 2, 0, 6, 0 )
223	ENDIF
224
225	CALL MPI_SEND( ny, 1, MPI_INTEGER, target_id, 18, comm_inter, ierr )
226	CALL MPI_RECV( iremote, 1, MPI_INTEGER, target_id, 18, comm_inter, &
227	status, ierr )
228	IF ( ny /= iremote ) THEN
229	WRITE( message_string, * ) 'coupling mode "', TRIM( coupling_mode ), &
230	'": ny = ', ny, '& is not equal to ny_remote = ', iremote
231	CALL message( 'check_parameters', 'PA0012', 1, 2, 0, 6, 0 )
232	ENDIF
233	#else
234	WRITE( message_string, * ) 'coupling requires PALM to be called with', &
235	' ''mrun -K parallel'''
236	CALL message( 'check_parameters', 'PA0141', 1, 2, 0, 6, 0 )
237	#endif
238	ENDIF
239
240	#if defined( __parallel )
241	!
242	!-- Exchange via intercommunicator
243	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
244	CALL MPI_SEND( humidity, 1, MPI_LOGICAL, target_id, 19, comm_inter, &
245	ierr )
246	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
247	CALL MPI_RECV( humidity_remote, 1, MPI_LOGICAL, target_id, 19, &
248	comm_inter, status, ierr )
249	ENDIF
250	#endif
251
252
253	!
254	!-- Generate the file header which is used as a header for most of PALM's
255	!-- output files
256	CALL DATE_AND_TIME( date, time )
257	run_date = date(7:8)//'-'//date(5:6)//'-'//date(3:4)
258	run_time = time(1:2)//':'//time(3:4)//':'//time(5:6)
259	IF ( coupling_mode == 'uncoupled' ) THEN
260	coupling_string = ''
261	ELSEIF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
262	coupling_string = ' coupled (atmosphere)'
263	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
264	coupling_string = ' coupled (ocean)'
265	ENDIF
266
267	WRITE ( run_description_header, &
268	'(A,2X,A,2X,A,A,A,I2.2,A,2X,A,A,2X,A,1X,A)' ) &
269	TRIM( version ), TRIM( revision ), 'run: ', &
270	TRIM( run_identifier ), '.', runnr, TRIM( coupling_string ), &
271	'host: ', TRIM( host ), run_date, run_time
272
273	!
274	!-- Check the general loop optimization method
275	IF ( loop_optimization == 'default' ) THEN
276	IF ( host(1:3) == 'nec' ) THEN
277	loop_optimization = 'vector'
278	ELSE
279	loop_optimization = 'cache'
280	ENDIF
281	ENDIF
282	IF ( loop_optimization /= 'noopt' .AND. loop_optimization /= 'cache' &
283	.AND. loop_optimization /= 'vector' ) THEN
284	message_string = 'illegal value given for loop_optimization: "' // &
285	TRIM( loop_optimization ) // '"'
286	CALL message( 'check_parameters', 'PA0013', 1, 2, 0, 6, 0 )
287	ENDIF
288
289	!
290	!-- Check topography setting (check for illegal parameter combinations)
291	IF ( topography /= 'flat' ) THEN
292	action = ' '
293	IF ( scalar_advec /= 'pw-scheme' ) THEN
294	WRITE( action, '(A,A)' ) 'scalar_advec = ', scalar_advec
295	ENDIF
296	IF ( momentum_advec /= 'pw-scheme' ) THEN
297	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
298	ENDIF
299	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
300	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
301	ENDIF
302	IF ( psolver == 'sor' ) THEN
303	WRITE( action, '(A,A)' ) 'psolver = ', psolver
304	ENDIF
305	IF ( sloping_surface ) THEN
306	WRITE( action, '(A)' ) 'sloping surface = .TRUE.'
307	ENDIF
308	IF ( galilei_transformation ) THEN
309	WRITE( action, '(A)' ) 'galilei_transformation = .TRUE.'
310	ENDIF
311	IF ( cloud_physics ) THEN
312	WRITE( action, '(A)' ) 'cloud_physics = .TRUE.'
313	ENDIF
314	IF ( cloud_droplets ) THEN
315	WRITE( action, '(A)' ) 'cloud_droplets = .TRUE.'
316	ENDIF
317	IF ( humidity ) THEN
318	WRITE( action, '(A)' ) 'humidity = .TRUE.'
319	ENDIF
320	IF ( .NOT. prandtl_layer ) THEN
321	WRITE( action, '(A)' ) 'prandtl_layer = .FALSE.'
322	ENDIF
323	IF ( action /= ' ' ) THEN
324	message_string = 'a non-flat topography does not allow ' // &
325	TRIM( action )
326	CALL message( 'check_parameters', 'PA0014', 1, 2, 0, 6, 0 )
327	ENDIF
328	!
329	!-- In case of non-flat topography, check whether the convention how to
330	!-- define the topography grid has been set correctly, or whether the default
331	!-- is applicable. If this is not possible, abort.
332	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
333	IF ( TRIM( topography ) /= 'single_building' .AND. &
334	TRIM( topography ) /= 'single_street_canyon' .AND. &
335	TRIM( topography ) /= 'read_from_file' ) THEN
336	!-- The default value is not applicable here, because it is only valid
337	!-- for the two standard cases 'single_building' and 'read_from_file'
338	!-- defined in init_grid.
339	WRITE( message_string, * ) &
340	'The value for "topography_grid_convention" ', &
341	'is not set. Its default value is & only valid for ', &
342	'"topography" = ''single_building'', ', &
343	'''single_street_canyon'' & or ''read_from_file''.', &
344	' & Choose ''cell_edge'' or ''cell_center''.'
345	CALL message( 'user_check_parameters', 'PA0239', 1, 2, 0, 6, 0 )
346	ELSE
347	!-- The default value is applicable here.
348	!-- Set convention according to topography.
349	IF ( TRIM( topography ) == 'single_building' .OR. &
350	TRIM( topography ) == 'single_street_canyon' ) THEN
351	topography_grid_convention = 'cell_edge'
352	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
353	topography_grid_convention = 'cell_center'
354	ENDIF
355	ENDIF
356	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
357	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
358	WRITE( message_string, * ) &
359	'The value for "topography_grid_convention" is ', &
360	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
361	CALL message( 'user_check_parameters', 'PA0240', 1, 2, 0, 6, 0 )
362	ENDIF
363
364	ENDIF
365
366	!
367	!-- Check ocean setting
368	IF ( ocean ) THEN
369	action = ' '
370	IF ( timestep_scheme(1:8) == 'leapfrog' ) THEN
371	WRITE( action, '(A,A)' ) 'timestep_scheme = ', timestep_scheme
372	ENDIF
373	IF ( momentum_advec == 'ups-scheme' ) THEN
374	WRITE( action, '(A,A)' ) 'momentum_advec = ', momentum_advec
375	ENDIF
376	IF ( action /= ' ' ) THEN
377	message_string = 'ocean = .T. does not allow ' // TRIM( action )
378	CALL message( 'check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
379	ENDIF
380	ENDIF
381
382	!
383	!-- Check whether there are any illegal values
384	!-- Pressure solver:
385	IF ( psolver /= 'poisfft' .AND. psolver /= 'poisfft_hybrid' .AND. &
386	psolver /= 'sor' .AND. psolver /= 'multigrid' ) THEN
387	message_string = 'unknown solver for perturbation pressure: psolver' // &
388	' = "' // TRIM( psolver ) // '"'
389	CALL message( 'check_parameters', 'PA0016', 1, 2, 0, 6, 0 )
390	ENDIF
391
392	#if defined( __parallel )
393	IF ( psolver == 'poisfft_hybrid' .AND. pdims(2) /= 1 ) THEN
394	message_string = 'psolver = "' // TRIM( psolver ) // '" only works ' // &
395	'for a 1d domain-decomposition along x & please do' // &
396	' not set npey/=1 in the parameter file'
397	CALL message( 'check_parameters', 'PA0017', 1, 2, 0, 6, 0 )
398	ENDIF
399	IF ( psolver == 'poisfft_hybrid' .AND. &
400	( nxra > nxr .OR. nyna > nyn .OR. nza > nz ) .OR. &
401	psolver == 'multigrid' .AND. &
402	( nxra > nxr .OR. nyna > nyn ) ) THEN
403	message_string = 'psolver = "' // TRIM( psolver ) // '" does not ' // &
404	'work for subdomains with unequal size & please ' // &
405	'set grid_matching = ''strict'' in the parameter file'
406	CALL message( 'check_parameters', 'PA0018', 1, 2, 0, 6, 0 )
407	ENDIF
408	#else
409	IF ( psolver == 'poisfft_hybrid' ) THEN
410	message_string = 'psolver = "' // TRIM( psolver ) // '" only works' // &
411	' for a parallel environment'
412	CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 )
413	ENDIF
414	#endif
415
416	IF ( psolver == 'multigrid' ) THEN
417	IF ( cycle_mg == 'w' ) THEN
418	gamma_mg = 2
419	ELSEIF ( cycle_mg == 'v' ) THEN
420	gamma_mg = 1
421	ELSE
422	message_string = 'unknown multigrid cycle: cycle_mg = "' // &
423	TRIM( cycle_mg ) // '"'
424	CALL message( 'check_parameters', 'PA0020', 1, 2, 0, 6, 0 )
425	ENDIF
426	ENDIF
427
428	IF ( fft_method /= 'singleton-algorithm' .AND. &
429	fft_method /= 'temperton-algorithm' .AND. &
430	fft_method /= 'system-specific' ) THEN
431	message_string = 'unknown fft-algorithm: fft_method = "' // &
432	TRIM( fft_method ) // '"'
433	CALL message( 'check_parameters', 'PA0021', 1, 2, 0, 6, 0 )
434	ENDIF
435
436	!
437	!-- Advection schemes:
438	IF ( momentum_advec /= 'pw-scheme' .AND. momentum_advec /= 'ups-scheme' ) &
439	THEN
440	message_string = 'unknown advection scheme: momentum_advec = "' // &
441	TRIM( momentum_advec ) // '"'
442	CALL message( 'check_parameters', 'PA0022', 1, 2, 0, 6, 0 )
443	ENDIF
444	IF ( ( momentum_advec == 'ups-scheme' .OR. scalar_advec == 'ups-scheme' )&
445	.AND. timestep_scheme /= 'euler' ) THEN
446	message_string = 'momentum_advec = "' // TRIM( momentum_advec ) // &
447	'" is not allowed with timestep_scheme = "' // &
448	TRIM( timestep_scheme ) // '"'
449	CALL message( 'check_parameters', 'PA0023', 1, 2, 0, 6, 0 )
450	ENDIF
451
452	IF ( scalar_advec /= 'pw-scheme' .AND. scalar_advec /= 'bc-scheme' .AND.&
453	scalar_advec /= 'ups-scheme' ) THEN
454	message_string = 'unknown advection scheme: scalar_advec = "' // &
455	TRIM( scalar_advec ) // '"'
456	CALL message( 'check_parameters', 'PA0024', 1, 2, 0, 6, 0 )
457	ENDIF
458
459	IF ( use_sgs_for_particles .AND. .NOT. use_upstream_for_tke ) THEN
460	use_upstream_for_tke = .TRUE.
461	message_string = 'use_upstream_for_tke set .TRUE. because ' // &
462	'use_sgs_for_particles = .TRUE.'
463	CALL message( 'check_parameters', 'PA0025', 0, 1, 0, 6, 0 )
464	ENDIF
465
466	IF ( use_upstream_for_tke .AND. timestep_scheme(1:8) == 'leapfrog' ) THEN
467	message_string = 'use_upstream_for_tke = .TRUE. not allowed with ' // &
468	'timestep_scheme = "' // TRIM( timestep_scheme ) // '"'
469	CALL message( 'check_parameters', 'PA0026', 1, 2, 0, 6, 0 )
470	ENDIF
471
472	!
473	!-- Timestep schemes:
474	SELECT CASE ( TRIM( timestep_scheme ) )
475
476	CASE ( 'euler' )
477	intermediate_timestep_count_max = 1
478	asselin_filter_factor = 0.0
479
480	CASE ( 'leapfrog', 'leapfrog+euler' )
481	intermediate_timestep_count_max = 1
482
483	CASE ( 'runge-kutta-2' )
484	intermediate_timestep_count_max = 2
485	asselin_filter_factor = 0.0
486
487	CASE ( 'runge-kutta-3' )
488	intermediate_timestep_count_max = 3
489	asselin_filter_factor = 0.0
490
491	CASE DEFAULT
492	message_string = 'unknown timestep scheme: timestep_scheme = "' // &
493	TRIM( timestep_scheme ) // '"'
494	CALL message( 'check_parameters', 'PA0027', 1, 2, 0, 6, 0 )
495
496	END SELECT
497
498	IF ( scalar_advec == 'ups-scheme' .AND. timestep_scheme(1:5) == 'runge' )&
499	THEN
500	message_string = 'scalar advection scheme "' // TRIM( scalar_advec ) // &
501	'" & does not work with timestep_scheme "' // &
502	TRIM( timestep_scheme ) // '"'
503	CALL message( 'check_parameters', 'PA0028', 1, 2, 0, 6, 0 )
504	ENDIF
505
506	IF ( momentum_advec /= 'pw-scheme' .AND. timestep_scheme(1:5) == 'runge' ) &
507	THEN
508	message_string = 'momentum advection scheme "' // &
509	TRIM( momentum_advec ) // '" & does not work with ' // &
510	'timestep_scheme "' // TRIM( timestep_scheme ) // '"'
511	CALL message( 'check_parameters', 'PA0029', 1, 2, 0, 6, 0 )
512	ENDIF
513
514	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
515	TRIM( initializing_actions ) /= 'read_data_for_recycling' ) THEN
516	!
517	!-- No restart run: several initialising actions are possible
518	action = initializing_actions
519	DO WHILE ( TRIM( action ) /= '' )
520	position = INDEX( action, ' ' )
521	SELECT CASE ( action(1:position-1) )
522
523	CASE ( 'set_constant_profiles', 'set_1d-model_profiles', &
524	'by_user', 'initialize_vortex', 'initialize_ptanom' )
525	action = action(position+1:)
526
527	CASE DEFAULT
528	message_string = 'initializing_action = "' // &
529	TRIM( action ) // '" unkown or not allowed'
530	CALL message( 'check_parameters', 'PA0030', 1, 2, 0, 6, 0 )
531
532	END SELECT
533	ENDDO
534	ENDIF
535
536	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
537	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
538	message_string = 'initializing_actions = "set_constant_profiles"' // &
539	' and "set_1d-model_profiles" are not allowed ' // &
540	'simultaneously'
541	CALL message( 'check_parameters', 'PA0031', 1, 2, 0, 6, 0 )
542	ENDIF
543
544	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 .AND. &
545	INDEX( initializing_actions, 'by_user' ) /= 0 ) THEN
546	message_string = 'initializing_actions = "set_constant_profiles"' // &
547	' and "by_user" are not allowed simultaneously'
548	CALL message( 'check_parameters', 'PA0032', 1, 2, 0, 6, 0 )
549	ENDIF
550
551	IF ( INDEX( initializing_actions, 'by_user' ) /= 0 .AND. &
552	INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
553	message_string = 'initializing_actions = "by_user" and ' // &
554	'"set_1d-model_profiles" are not allowed simultaneously'
555	CALL message( 'check_parameters', 'PA0033', 1, 2, 0, 6, 0 )
556	ENDIF
557
558	IF ( cloud_physics .AND. .NOT. humidity ) THEN
559	WRITE( message_string, * ) 'cloud_physics = ', cloud_physics, ' is ', &
560	'not allowed with humidity = ', humidity
561	CALL message( 'check_parameters', 'PA0034', 1, 2, 0, 6, 0 )
562	ENDIF
563
564	IF ( precipitation .AND. .NOT. cloud_physics ) THEN
565	WRITE( message_string, * ) 'precipitation = ', precipitation, ' is ', &
566	'not allowed with cloud_physics = ', cloud_physics
567	CALL message( 'check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
568	ENDIF
569
570	IF ( humidity .AND. sloping_surface ) THEN
571	message_string = 'humidity = .TRUE. and sloping_surface = .TRUE. ' // &
572	'are not allowed simultaneously'
573	CALL message( 'check_parameters', 'PA0036', 1, 2, 0, 6, 0 )
574	ENDIF
575
576	IF ( humidity .AND. scalar_advec == 'ups-scheme' ) THEN
577	message_string = 'UPS-scheme is not implemented for humidity = .TRUE.'
578	CALL message( 'check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
579	ENDIF
580
581	IF ( passive_scalar .AND. humidity ) THEN
582	message_string = 'humidity = .TRUE. and passive_scalar = .TRUE. ' // &
583	'is not allowed simultaneously'
584	CALL message( 'check_parameters', 'PA0038', 1, 2, 0, 6, 0 )
585	ENDIF
586
587	IF ( passive_scalar .AND. scalar_advec == 'ups-scheme' ) THEN
588	message_string = 'UPS-scheme is not implemented for passive_scalar' // &
589	' = .TRUE.'
590	CALL message( 'check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
591	ENDIF
592
593	IF ( grid_matching /= 'strict' .AND. grid_matching /= 'match' ) THEN
594	message_string = 'illegal value "' // TRIM( grid_matching ) // &
595	'" found for parameter grid_matching'
596	CALL message( 'check_parameters', 'PA0040', 1, 2, 0, 6, 0 )
597	ENDIF
598
599	IF ( plant_canopy .AND. ( drag_coefficient == 0.0 ) ) THEN
600	message_string = 'plant_canopy = .TRUE. requires a non-zero drag ' // &
601	'coefficient & given value is drag_coefficient = 0.0'
602	CALL message( 'check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
603	ENDIF
604
605	!
606	!-- In case of no model continuation run, check initialising parameters and
607	!-- deduce further quantities
608	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
609
610	!
611	!-- Initial profiles for 1D and 3D model, respectively
612	u_init = ug_surface
613	v_init = vg_surface
614	pt_init = pt_surface
615	IF ( humidity ) q_init = q_surface
616	IF ( ocean ) sa_init = sa_surface
617	IF ( passive_scalar ) q_init = s_surface
618	IF ( plant_canopy ) lad = 0.0
619
620	!
621	!--
622	!-- If required, compute initial profile of the geostrophic wind
623	!-- (component ug)
624	i = 1
625	gradient = 0.0
626
627	IF ( .NOT. ocean ) THEN
628
629	ug_vertical_gradient_level_ind(1) = 0
630	ug(0) = ug_surface
631	DO k = 1, nzt+1
632	IF ( i < 11 ) THEN
633	IF ( ug_vertical_gradient_level(i) < zu(k) .AND. &
634	ug_vertical_gradient_level(i) >= 0.0 ) THEN
635	gradient = ug_vertical_gradient(i) / 100.0
636	ug_vertical_gradient_level_ind(i) = k - 1
637	i = i + 1
638	ENDIF
639	ENDIF
640	IF ( gradient /= 0.0 ) THEN
641	IF ( k /= 1 ) THEN
642	ug(k) = ug(k-1) + dzu(k) * gradient
643	ELSE
644	ug(k) = ug_surface + 0.5 * dzu(k) * gradient
645	ENDIF
646	ELSE
647	ug(k) = ug(k-1)
648	ENDIF
649	ENDDO
650
651	ELSE
652
653	ug_vertical_gradient_level_ind(1) = nzt+1
654	ug(nzt+1) = ug_surface
655	DO k = nzt, 0, -1
656	IF ( i < 11 ) THEN
657	IF ( ug_vertical_gradient_level(i) > zu(k) .AND. &
658	ug_vertical_gradient_level(i) <= 0.0 ) THEN
659	gradient = ug_vertical_gradient(i) / 100.0
660	ug_vertical_gradient_level_ind(i) = k + 1
661	i = i + 1
662	ENDIF
663	ENDIF
664	IF ( gradient /= 0.0 ) THEN
665	IF ( k /= nzt ) THEN
666	ug(k) = ug(k+1) - dzu(k+1) * gradient
667	ELSE
668	ug(k) = ug_surface - 0.5 * dzu(k+1) * gradient
669	ug(k+1) = ug_surface + 0.5 * dzu(k+1) * gradient
670	ENDIF
671	ELSE
672	ug(k) = ug(k+1)
673	ENDIF
674	ENDDO
675
676	ENDIF
677
678	u_init = ug
679
680	!
681	!-- In case of no given gradients for ug, choose a vanishing gradient
682	IF ( ug_vertical_gradient_level(1) == -9999999.9 ) THEN
683	ug_vertical_gradient_level(1) = 0.0
684	ENDIF
685
686	!
687	!--
688	!-- If required, compute initial profile of the geostrophic wind
689	!-- (component vg)
690	i = 1
691	gradient = 0.0
692
693	IF ( .NOT. ocean ) THEN
694
695	vg_vertical_gradient_level_ind(1) = 0
696	vg(0) = vg_surface
697	DO k = 1, nzt+1
698	IF ( i < 11 ) THEN
699	IF ( vg_vertical_gradient_level(i) < zu(k) .AND. &
700	vg_vertical_gradient_level(i) >= 0.0 ) THEN
701	gradient = vg_vertical_gradient(i) / 100.0
702	vg_vertical_gradient_level_ind(i) = k - 1
703	i = i + 1
704	ENDIF
705	ENDIF
706	IF ( gradient /= 0.0 ) THEN
707	IF ( k /= 1 ) THEN
708	vg(k) = vg(k-1) + dzu(k) * gradient
709	ELSE
710	vg(k) = vg_surface + 0.5 * dzu(k) * gradient
711	ENDIF
712	ELSE
713	vg(k) = vg(k-1)
714	ENDIF
715	ENDDO
716
717	ELSE
718
719	vg_vertical_gradient_level_ind(1) = nzt+1
720	vg(nzt+1) = vg_surface
721	DO k = nzt, 0, -1
722	IF ( i < 11 ) THEN
723	IF ( vg_vertical_gradient_level(i) > zu(k) .AND. &
724	vg_vertical_gradient_level(i) <= 0.0 ) THEN
725	gradient = vg_vertical_gradient(i) / 100.0
726	vg_vertical_gradient_level_ind(i) = k + 1
727	i = i + 1
728	ENDIF
729	ENDIF
730	IF ( gradient /= 0.0 ) THEN
731	IF ( k /= nzt ) THEN
732	vg(k) = vg(k+1) - dzu(k+1) * gradient
733	ELSE
734	vg(k) = vg_surface - 0.5 * dzu(k+1) * gradient
735	vg(k+1) = vg_surface + 0.5 * dzu(k+1) * gradient
736	ENDIF
737	ELSE
738	vg(k) = vg(k+1)
739	ENDIF
740	ENDDO
741
742	ENDIF
743
744	v_init = vg
745
746	!
747	!-- In case of no given gradients for vg, choose a vanishing gradient
748	IF ( vg_vertical_gradient_level(1) == -9999999.9 ) THEN
749	vg_vertical_gradient_level(1) = 0.0
750	ENDIF
751
752	!
753	!-- Compute initial temperature profile using the given temperature gradients
754	i = 1
755	gradient = 0.0
756
757	IF ( .NOT. ocean ) THEN
758
759	pt_vertical_gradient_level_ind(1) = 0
760	DO k = 1, nzt+1
761	IF ( i < 11 ) THEN
762	IF ( pt_vertical_gradient_level(i) < zu(k) .AND. &
763	pt_vertical_gradient_level(i) >= 0.0 ) THEN
764	gradient = pt_vertical_gradient(i) / 100.0
765	pt_vertical_gradient_level_ind(i) = k - 1
766	i = i + 1
767	ENDIF
768	ENDIF
769	IF ( gradient /= 0.0 ) THEN
770	IF ( k /= 1 ) THEN
771	pt_init(k) = pt_init(k-1) + dzu(k) * gradient
772	ELSE
773	pt_init(k) = pt_surface + 0.5 * dzu(k) * gradient
774	ENDIF
775	ELSE
776	pt_init(k) = pt_init(k-1)
777	ENDIF
778	ENDDO
779
780	ELSE
781
782	pt_vertical_gradient_level_ind(1) = nzt+1
783	DO k = nzt, 0, -1
784	IF ( i < 11 ) THEN
785	IF ( pt_vertical_gradient_level(i) > zu(k) .AND. &
786	pt_vertical_gradient_level(i) <= 0.0 ) THEN
787	gradient = pt_vertical_gradient(i) / 100.0
788	pt_vertical_gradient_level_ind(i) = k + 1
789	i = i + 1
790	ENDIF
791	ENDIF
792	IF ( gradient /= 0.0 ) THEN
793	IF ( k /= nzt ) THEN
794	pt_init(k) = pt_init(k+1) - dzu(k+1) * gradient
795	ELSE
796	pt_init(k) = pt_surface - 0.5 * dzu(k+1) * gradient
797	pt_init(k+1) = pt_surface + 0.5 * dzu(k+1) * gradient
798	ENDIF
799	ELSE
800	pt_init(k) = pt_init(k+1)
801	ENDIF
802	ENDDO
803
804	ENDIF
805
806	!
807	!-- In case of no given temperature gradients, choose gradient of neutral
808	!-- stratification
809	IF ( pt_vertical_gradient_level(1) == -9999999.9 ) THEN
810	pt_vertical_gradient_level(1) = 0.0
811	ENDIF
812
813	!
814	!-- Store temperature gradient at the top boundary for possible Neumann
815	!-- boundary condition
816	bc_pt_t_val = ( pt_init(nzt+1) - pt_init(nzt) ) / dzu(nzt+1)
817
818	!
819	!-- If required, compute initial humidity or scalar profile using the given
820	!-- humidity/scalar gradient. In case of scalar transport, initially store
821	!-- values of the scalar parameters on humidity parameters
822	IF ( passive_scalar ) THEN
823	bc_q_b = bc_s_b
824	bc_q_t = bc_s_t
825	q_surface = s_surface
826	q_surface_initial_change = s_surface_initial_change
827	q_vertical_gradient = s_vertical_gradient
828	q_vertical_gradient_level = s_vertical_gradient_level
829	surface_waterflux = surface_scalarflux
830	ENDIF
831
832	IF ( humidity .OR. passive_scalar ) THEN
833
834	i = 1
835	gradient = 0.0
836	q_vertical_gradient_level_ind(1) = 0
837	DO k = 1, nzt+1
838	IF ( i < 11 ) THEN
839	IF ( q_vertical_gradient_level(i) < zu(k) .AND. &
840	q_vertical_gradient_level(i) >= 0.0 ) THEN
841	gradient = q_vertical_gradient(i) / 100.0
842	q_vertical_gradient_level_ind(i) = k - 1
843	i = i + 1
844	ENDIF
845	ENDIF
846	IF ( gradient /= 0.0 ) THEN
847	IF ( k /= 1 ) THEN
848	q_init(k) = q_init(k-1) + dzu(k) * gradient
849	ELSE
850	q_init(k) = q_init(k-1) + 0.5 * dzu(k) * gradient
851	ENDIF
852	ELSE
853	q_init(k) = q_init(k-1)
854	ENDIF
855	!
856	!-- Avoid negative humidities
857	IF ( q_init(k) < 0.0 ) THEN
858	q_init(k) = 0.0
859	ENDIF
860	ENDDO
861
862	!
863	!-- In case of no given humidity gradients, choose zero gradient
864	!-- conditions
865	IF ( q_vertical_gradient_level(1) == -1.0 ) THEN
866	q_vertical_gradient_level(1) = 0.0
867	ENDIF
868
869	!
870	!-- Store humidity gradient at the top boundary for possile Neumann
871	!-- boundary condition
872	bc_q_t_val = ( q_init(nzt+1) - q_init(nzt) ) / dzu(nzt+1)
873
874	ENDIF
875
876	!
877	!-- If required, compute initial salinity profile using the given salinity
878	!-- gradients
879	IF ( ocean ) THEN
880
881	i = 1
882	gradient = 0.0
883
884	sa_vertical_gradient_level_ind(1) = nzt+1
885	DO k = nzt, 0, -1
886	IF ( i < 11 ) THEN
887	IF ( sa_vertical_gradient_level(i) > zu(k) .AND. &
888	sa_vertical_gradient_level(i) <= 0.0 ) THEN
889	gradient = sa_vertical_gradient(i) / 100.0
890	sa_vertical_gradient_level_ind(i) = k + 1
891	i = i + 1
892	ENDIF
893	ENDIF
894	IF ( gradient /= 0.0 ) THEN
895	IF ( k /= nzt ) THEN
896	sa_init(k) = sa_init(k+1) - dzu(k+1) * gradient
897	ELSE
898	sa_init(k) = sa_surface - 0.5 * dzu(k+1) * gradient
899	sa_init(k+1) = sa_surface + 0.5 * dzu(k+1) * gradient
900	ENDIF
901	ELSE
902	sa_init(k) = sa_init(k+1)
903	ENDIF
904	ENDDO
905
906	ENDIF
907
908	!
909	!-- If required compute the profile of leaf area density used in the plant canopy model
910	IF ( plant_canopy ) THEN
911
912	i = 1
913	gradient = 0.0
914
915	IF ( .NOT. ocean ) THEN
916
917	lad(0) = lad_surface
918
919	lad_vertical_gradient_level_ind(1) = 0
920	DO k = 1, pch_index
921	IF ( i < 11 ) THEN
922	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
923	lad_vertical_gradient_level(i) >= 0.0 ) THEN
924	gradient = lad_vertical_gradient(i)
925	lad_vertical_gradient_level_ind(i) = k - 1
926	i = i + 1
927	ENDIF
928	ENDIF
929	IF ( gradient /= 0.0 ) THEN
930	IF ( k /= 1 ) THEN
931	lad(k) = lad(k-1) + dzu(k) * gradient
932	ELSE
933	lad(k) = lad_surface + 0.5 * dzu(k) *gradient
934	ENDIF
935	ELSE
936	lad(k) = lad(k-1)
937	ENDIF
938	ENDDO
939
940	ENDIF
941
942	!
943	!-- In case of no given leaf area density gradients, choose a vanishing gradient
944	IF ( lad_vertical_gradient_level(1) == -9999999.9 ) THEN
945	lad_vertical_gradient_level(1) = 0.0
946	ENDIF
947
948	ENDIF
949
950	ENDIF
951
952	!
953	!-- Compute Coriolis parameter
954	f = 2.0 * omega * SIN( phi / 180.0 * pi )
955	fs = 2.0 * omega * COS( phi / 180.0 * pi )
956
957	!
958	!-- Ocean runs always use reference values in the buoyancy term. Therefore
959	!-- set the reference temperature equal to the surface temperature.
960	IF ( ocean .AND. pt_reference == 9999999.9 ) pt_reference = pt_surface
961
962	!
963	!-- Reference value has to be used in buoyancy terms
964	IF ( pt_reference /= 9999999.9 ) use_reference = .TRUE.
965
966	!
967	!-- Sign of buoyancy/stability terms
968	IF ( ocean ) atmos_ocean_sign = -1.0
969
970	!
971	!-- Ocean version must use flux boundary conditions at the top
972	IF ( ocean .AND. .NOT. use_top_fluxes ) THEN
973	message_string = 'use_top_fluxes must be .TRUE. in ocean version'
974	CALL message( 'check_parameters', 'PA0042', 1, 2, 0, 6, 0 )
975	ENDIF
976
977	!
978	!-- In case of a given slope, compute the relevant quantities
979	IF ( alpha_surface /= 0.0 ) THEN
980	IF ( ABS( alpha_surface ) > 90.0 ) THEN
981	WRITE( message_string, * ) 'ABS( alpha_surface = ', alpha_surface, &
982	' ) must be < 90.0'
983	CALL message( 'check_parameters', 'PA0043', 1, 2, 0, 6, 0 )
984	ENDIF
985	sloping_surface = .TRUE.
986	cos_alpha_surface = COS( alpha_surface / 180.0 * pi )
987	sin_alpha_surface = SIN( alpha_surface / 180.0 * pi )
988	ENDIF
989
990	!
991	!-- Check time step and cfl_factor
992	IF ( dt /= -1.0 ) THEN
993	IF ( dt <= 0.0 .AND. dt /= -1.0 ) THEN
994	WRITE( message_string, * ) 'dt = ', dt , ' <= 0.0'
995	CALL message( 'check_parameters', 'PA0044', 1, 2, 0, 6, 0 )
996	ENDIF
997	dt_3d = dt
998	dt_fixed = .TRUE.
999	ENDIF
1000
1001	IF ( cfl_factor <= 0.0 .OR. cfl_factor > 1.0 ) THEN
1002	IF ( cfl_factor == -1.0 ) THEN
1003	IF ( momentum_advec == 'ups-scheme' .OR. &
1004	scalar_advec == 'ups-scheme' ) THEN
1005	cfl_factor = 0.8
1006	ELSE
1007	IF ( timestep_scheme == 'runge-kutta-2' ) THEN
1008	cfl_factor = 0.8
1009	ELSEIF ( timestep_scheme == 'runge-kutta-3' ) THEN
1010	cfl_factor = 0.9
1011	ELSE
1012	cfl_factor = 0.1
1013	ENDIF
1014	ENDIF
1015	ELSE
1016	WRITE( message_string, * ) 'cfl_factor = ', cfl_factor, &
1017	' out of range & 0.0 < cfl_factor <= 1.0 is required'
1018	CALL message( 'check_parameters', 'PA0045', 1, 2, 0, 6, 0 )
1019	ENDIF
1020	ENDIF
1021
1022	!
1023	!-- Store simulated time at begin
1024	simulated_time_at_begin = simulated_time
1025
1026	!
1027	!-- Set wind speed in the Galilei-transformed system
1028	IF ( galilei_transformation ) THEN
1029	IF ( use_ug_for_galilei_tr .AND. &
1030	ug_vertical_gradient_level(1) == 0.0 .AND. &
1031	vg_vertical_gradient_level(1) == 0.0 ) THEN
1032	u_gtrans = ug_surface
1033	v_gtrans = vg_surface
1034	ELSEIF ( use_ug_for_galilei_tr .AND. &
1035	ug_vertical_gradient_level(1) /= 0.0 ) THEN
1036	message_string = 'baroclinicity (ug) not allowed simultaneously' // &
1037	' with galilei transformation'
1038	CALL message( 'check_parameters', 'PA0046', 1, 2, 0, 6, 0 )
1039	ELSEIF ( use_ug_for_galilei_tr .AND. &
1040	vg_vertical_gradient_level(1) /= 0.0 ) THEN
1041	message_string = 'baroclinicity (vg) not allowed simultaneously' // &
1042	' with galilei transformation'
1043	CALL message( 'check_parameters', 'PA0047', 1, 2, 0, 6, 0 )
1044	ELSE
1045	message_string = 'variable translation speed used for galilei-' // &
1046	'transformation, which may cause & instabilities in stably ' // &
1047	'stratified regions'
1048	CALL message( 'check_parameters', 'PA0048', 0, 1, 0, 6, 0 )
1049	ENDIF
1050	ENDIF
1051
1052	!
1053	!-- In case of using a prandtl-layer, calculated (or prescribed) surface
1054	!-- fluxes have to be used in the diffusion-terms
1055	IF ( prandtl_layer ) use_surface_fluxes = .TRUE.
1056
1057	!
1058	!-- Check boundary conditions and set internal variables:
1059	!-- Lateral boundary conditions
1060	IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. &
1061	bc_lr /= 'radiation/dirichlet' ) THEN
1062	message_string = 'unknown boundary condition: bc_lr = "' // &
1063	TRIM( bc_lr ) // '"'
1064	CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
1065	ENDIF
1066	IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. &
1067	bc_ns /= 'radiation/dirichlet' ) THEN
1068	message_string = 'unknown boundary condition: bc_ns = "' // &
1069	TRIM( bc_ns ) // '"'
1070	CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
1071	ENDIF
1072
1073	!
1074	!-- Non-cyclic lateral boundaries require the multigrid method and Piascek-
1075	!-- Willimas advection scheme. Several schemes and tools do not work with
1076	!-- non-cyclic boundary conditions.
1077	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1078	IF ( psolver /= 'multigrid' ) THEN
1079	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1080	'psolver = "' // TRIM( psolver ) // '"'
1081	CALL message( 'check_parameters', 'PA0051', 1, 2, 0, 6, 0 )
1082	ENDIF
1083	IF ( momentum_advec /= 'pw-scheme' ) THEN
1084	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1085	'momentum_advec = "' // TRIM( momentum_advec ) // '"'
1086	CALL message( 'check_parameters', 'PA0052', 1, 2, 0, 6, 0 )
1087	ENDIF
1088	IF ( scalar_advec /= 'pw-scheme' ) THEN
1089	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1090	'scalar_advec = "' // TRIM( scalar_advec ) // '"'
1091	CALL message( 'check_parameters', 'PA0053', 1, 2, 0, 6, 0 )
1092	ENDIF
1093	IF ( galilei_transformation ) THEN
1094	message_string = 'non-cyclic lateral boundaries do not allow ' // &
1095	'galilei_transformation = .T.'
1096	CALL message( 'check_parameters', 'PA0054', 1, 2, 0, 6, 0 )
1097	ENDIF
1098	ENDIF
1099
1100	!
1101	!-- Bottom boundary condition for the turbulent Kinetic energy
1102	IF ( bc_e_b == 'neumann' ) THEN
1103	ibc_e_b = 1
1104	IF ( adjust_mixing_length .AND. prandtl_layer ) THEN
1105	message_string = 'adjust_mixing_length = TRUE and bc_e_b = "neumann"'
1106	CALL message( 'check_parameters', 'PA0055', 0, 1, 0, 6, 0 )
1107	ENDIF
1108	ELSEIF ( bc_e_b == '(u)*2+neumann' ) THEN
1109	ibc_e_b = 2
1110	IF ( .NOT. adjust_mixing_length .AND. prandtl_layer ) THEN
1111	message_string = 'adjust_mixing_length = FALSE and bc_e_b = "' // &
1112	TRIM( bc_e_b ) // '"'
1113	CALL message( 'check_parameters', 'PA0056', 0, 1, 0, 6, 0 )
1114	ENDIF
1115	IF ( .NOT. prandtl_layer ) THEN
1116	bc_e_b = 'neumann'
1117	ibc_e_b = 1
1118	message_string = 'boundary condition bc_e_b changed to "' // &
1119	TRIM( bc_e_b ) // '"'
1120	CALL message( 'check_parameters', 'PA0057', 0, 1, 0, 6, 0 )
1121	ENDIF
1122	ELSE
1123	message_string = 'unknown boundary condition: bc_e_b = "' // &
1124	TRIM( bc_e_b ) // '"'
1125	CALL message( 'check_parameters', 'PA0058', 1, 2, 0, 6, 0 )
1126	ENDIF
1127
1128	!
1129	!-- Boundary conditions for perturbation pressure
1130	IF ( bc_p_b == 'dirichlet' ) THEN
1131	ibc_p_b = 0
1132	ELSEIF ( bc_p_b == 'neumann' ) THEN
1133	ibc_p_b = 1
1134	ELSEIF ( bc_p_b == 'neumann+inhomo' ) THEN
1135	ibc_p_b = 2
1136	ELSE
1137	message_string = 'unknown boundary condition: bc_p_b = "' // &
1138	TRIM( bc_p_b ) // '"'
1139	CALL message( 'check_parameters', 'PA0059', 1, 2, 0, 6, 0 )
1140	ENDIF
1141	IF ( ibc_p_b == 2 .AND. .NOT. prandtl_layer ) THEN
1142	message_string = 'boundary condition: bc_p_b = "' // TRIM( bc_p_b ) // &
1143	'" not allowed with prandtl_layer = .FALSE.'
1144	CALL message( 'check_parameters', 'PA0060', 1, 2, 0, 6, 0 )
1145	ENDIF
1146	IF ( bc_p_t == 'dirichlet' ) THEN
1147	ibc_p_t = 0
1148	ELSEIF ( bc_p_t == 'neumann' ) THEN
1149	ibc_p_t = 1
1150	ELSE
1151	message_string = 'unknown boundary condition: bc_p_t = "' // &
1152	TRIM( bc_p_t ) // '"'
1153	CALL message( 'check_parameters', 'PA0061', 1, 2, 0, 6, 0 )
1154	ENDIF
1155
1156	!
1157	!-- Boundary conditions for potential temperature
1158	IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN
1159	ibc_pt_b = 2
1160	ELSE
1161	IF ( bc_pt_b == 'dirichlet' ) THEN
1162	ibc_pt_b = 0
1163	ELSEIF ( bc_pt_b == 'neumann' ) THEN
1164	ibc_pt_b = 1
1165	ELSE
1166	message_string = 'unknown boundary condition: bc_pt_b = "' // &
1167	TRIM( bc_pt_b ) // '"'
1168	CALL message( 'check_parameters', 'PA0062', 1, 2, 0, 6, 0 )
1169	ENDIF
1170	ENDIF
1171
1172	IF ( bc_pt_t == 'dirichlet' ) THEN
1173	ibc_pt_t = 0
1174	ELSEIF ( bc_pt_t == 'neumann' ) THEN
1175	ibc_pt_t = 1
1176	ELSEIF ( bc_pt_t == 'initial_gradient' ) THEN
1177	ibc_pt_t = 2
1178	ELSE
1179	message_string = 'unknown boundary condition: bc_pt_t = "' // &
1180	TRIM( bc_pt_t ) // '"'
1181	CALL message( 'check_parameters', 'PA0063', 1, 2, 0, 6, 0 )
1182	ENDIF
1183
1184	IF ( surface_heatflux == 9999999.9 ) constant_heatflux = .FALSE.
1185	IF ( top_heatflux == 9999999.9 ) constant_top_heatflux = .FALSE.
1186	IF ( top_momentumflux_u /= 9999999.9 .AND. &
1187	top_momentumflux_v /= 9999999.9 ) THEN
1188	constant_top_momentumflux = .TRUE.
1189	ELSEIF ( .NOT. ( top_momentumflux_u == 9999999.9 .AND. &
1190	top_momentumflux_v == 9999999.9 ) ) THEN
1191	message_string = 'both, top_momentumflux_u AND top_momentumflux_v ' // &
1192	'must be set'
1193	CALL message( 'check_parameters', 'PA0064', 1, 2, 0, 6, 0 )
1194	ENDIF
1195
1196	!
1197	!-- A given surface temperature implies Dirichlet boundary condition for
1198	!-- temperature. In this case specification of a constant heat flux is
1199	!-- forbidden.
1200	IF ( ibc_pt_b == 0 .AND. constant_heatflux .AND. &
1201	surface_heatflux /= 0.0 ) THEN
1202	message_string = 'boundary_condition: bc_pt_b = "' // TRIM( bc_pt_b ) //&
1203	'& is not allowed with constant_heatflux = .TRUE.'
1204	CALL message( 'check_parameters', 'PA0065', 1, 2, 0, 6, 0 )
1205	ENDIF
1206	IF ( constant_heatflux .AND. pt_surface_initial_change /= 0.0 ) THEN
1207	WRITE ( message_string, * ) 'constant_heatflux = .TRUE. is not allo', &
1208	'wed with pt_surface_initial_change (/=0) = ', &
1209	pt_surface_initial_change
1210	CALL message( 'check_parameters', 'PA0066', 1, 2, 0, 6, 0 )
1211	ENDIF
1212
1213	!
1214	!-- A given temperature at the top implies Dirichlet boundary condition for
1215	!-- temperature. In this case specification of a constant heat flux is
1216	!-- forbidden.
1217	IF ( ibc_pt_t == 0 .AND. constant_top_heatflux .AND. &
1218	top_heatflux /= 0.0 ) THEN
1219	message_string = 'boundary_condition: bc_pt_t = "' // TRIM( bc_pt_t ) //&
1220	'" is not allowed with constant_top_heatflux = .TRUE.'
1221	CALL message( 'check_parameters', 'PA0067', 1, 2, 0, 6, 0 )
1222	ENDIF
1223
1224	!
1225	!-- Boundary conditions for salinity
1226	IF ( ocean ) THEN
1227	IF ( bc_sa_t == 'dirichlet' ) THEN
1228	ibc_sa_t = 0
1229	ELSEIF ( bc_sa_t == 'neumann' ) THEN
1230	ibc_sa_t = 1
1231	ELSE
1232	message_string = 'unknown boundary condition: bc_sa_t = "' // &
1233	TRIM( bc_sa_t ) // '"'
1234	CALL message( 'check_parameters', 'PA0068', 1, 2, 0, 6, 0 )
1235	ENDIF
1236
1237	IF ( top_salinityflux == 9999999.9 ) constant_top_salinityflux = .FALSE.
1238	IF ( ibc_sa_t == 1 .AND. top_salinityflux == 9999999.9 ) THEN
1239	message_string = 'boundary condition: bc_sa_t = "' // &
1240	TRIM( bc_sa_t ) // '" requires to set ' // &
1241	'top_salinityflux'
1242	CALL message( 'check_parameters', 'PA0069', 1, 2, 0, 6, 0 )
1243	ENDIF
1244
1245	!
1246	!-- A fixed salinity at the top implies Dirichlet boundary condition for
1247	!-- salinity. In this case specification of a constant salinity flux is
1248	!-- forbidden.
1249	IF ( ibc_sa_t == 0 .AND. constant_top_salinityflux .AND. &
1250	top_salinityflux /= 0.0 ) THEN
1251	message_string = 'boundary condition: bc_sa_t = "' // &
1252	TRIM( bc_sa_t ) // '" is not allowed with ' // &
1253	'constant_top_salinityflux = .TRUE.'
1254	CALL message( 'check_parameters', 'PA0070', 1, 2, 0, 6, 0 )
1255	ENDIF
1256
1257	ENDIF
1258
1259	!
1260	!-- In case of humidity or passive scalar, set boundary conditions for total
1261	!-- water content / scalar
1262	IF ( humidity .OR. passive_scalar ) THEN
1263	IF ( humidity ) THEN
1264	sq = 'q'
1265	ELSE
1266	sq = 's'
1267	ENDIF
1268	IF ( bc_q_b == 'dirichlet' ) THEN
1269	ibc_q_b = 0
1270	ELSEIF ( bc_q_b == 'neumann' ) THEN
1271	ibc_q_b = 1
1272	ELSE
1273	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1274	'_b ="' // TRIM( bc_q_b ) // '"'
1275	CALL message( 'check_parameters', 'PA0071', 1, 2, 0, 6, 0 )
1276	ENDIF
1277	IF ( bc_q_t == 'dirichlet' ) THEN
1278	ibc_q_t = 0
1279	ELSEIF ( bc_q_t == 'neumann' ) THEN
1280	ibc_q_t = 1
1281	ELSE
1282	message_string = 'unknown boundary condition: bc_' // TRIM( sq ) // &
1283	'_t ="' // TRIM( bc_q_t ) // '"'
1284	CALL message( 'check_parameters', 'PA0072', 1, 2, 0, 6, 0 )
1285	ENDIF
1286
1287	IF ( surface_waterflux == 0.0 ) constant_waterflux = .FALSE.
1288
1289	!
1290	!-- A given surface humidity implies Dirichlet boundary condition for
1291	!-- humidity. In this case specification of a constant water flux is
1292	!-- forbidden.
1293	IF ( ibc_q_b == 0 .AND. constant_waterflux ) THEN
1294	message_string = 'boundary condition: bc_' // TRIM( sq ) // '_b ' // &
1295	'= "' // TRIM( bc_q_b ) // '" is not allowed wi' // &
1296	'th prescribed surface flux'
1297	CALL message( 'check_parameters', 'PA0073', 1, 2, 0, 6, 0 )
1298	ENDIF
1299	IF ( constant_waterflux .AND. q_surface_initial_change /= 0.0 ) THEN
1300	WRITE( message_string, * ) 'a prescribed surface flux is not allo', &
1301	'wed with ', sq, '_surface_initial_change (/=0) = ', &
1302	q_surface_initial_change
1303	CALL message( 'check_parameters', 'PA0074', 1, 2, 0, 6, 0 )
1304	ENDIF
1305
1306	ENDIF
1307
1308	!
1309	!-- Boundary conditions for horizontal components of wind speed
1310	IF ( bc_uv_b == 'dirichlet' ) THEN
1311	ibc_uv_b = 0
1312	ELSEIF ( bc_uv_b == 'neumann' ) THEN
1313	ibc_uv_b = 1
1314	IF ( prandtl_layer ) THEN
1315	message_string = 'boundary condition: bc_uv_b = "' // &
1316	TRIM( bc_uv_b ) // '" is not allowed with prandtl_layer = .TRUE.'
1317	CALL message( 'check_parameters', 'PA0075', 1, 2, 0, 6, 0 )
1318	ENDIF
1319	ELSE
1320	message_string = 'unknown boundary condition: bc_uv_b = "' // &
1321	TRIM( bc_uv_b ) // '"'
1322	CALL message( 'check_parameters', 'PA0076', 1, 2, 0, 6, 0 )
1323	ENDIF
1324
1325	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1326	bc_uv_t = 'neumann'
1327	ibc_uv_t = 1
1328	ELSE
1329	IF ( bc_uv_t == 'dirichlet' .OR. bc_uv_t == 'dirichlet_0' ) THEN
1330	ibc_uv_t = 0
1331	ELSEIF ( bc_uv_t == 'neumann' ) THEN
1332	ibc_uv_t = 1
1333	ELSE
1334	message_string = 'unknown boundary condition: bc_uv_t = "' // &
1335	TRIM( bc_uv_t ) // '"'
1336	CALL message( 'check_parameters', 'PA0077', 1, 2, 0, 6, 0 )
1337	ENDIF
1338	ENDIF
1339
1340	!
1341	!-- Compute and check, respectively, the Rayleigh Damping parameter
1342	IF ( rayleigh_damping_factor == -1.0 ) THEN
1343	IF ( momentum_advec == 'ups-scheme' ) THEN
1344	rayleigh_damping_factor = 0.01
1345	ELSE
1346	rayleigh_damping_factor = 0.0
1347	ENDIF
1348	ELSE
1349	IF ( rayleigh_damping_factor < 0.0 .OR. rayleigh_damping_factor > 1.0 ) &
1350	THEN
1351	WRITE( message_string, * ) 'rayleigh_damping_factor = ', &
1352	rayleigh_damping_factor, ' out of range [0.0,1.0]'
1353	CALL message( 'check_parameters', 'PA0078', 1, 2, 0, 6, 0 )
1354	ENDIF
1355	ENDIF
1356
1357	IF ( rayleigh_damping_height == -1.0 ) THEN
1358	IF ( .NOT. ocean ) THEN
1359	rayleigh_damping_height = 0.66666666666 * zu(nzt)
1360	ELSE
1361	rayleigh_damping_height = 0.66666666666 * zu(nzb)
1362	ENDIF
1363	ELSE
1364	IF ( .NOT. ocean ) THEN
1365	IF ( rayleigh_damping_height < 0.0 .OR. &
1366	rayleigh_damping_height > zu(nzt) ) THEN
1367	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1368	rayleigh_damping_height, ' out of range [0.0,', zu(nzt), ']'
1369	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1370	ENDIF
1371	ELSE
1372	IF ( rayleigh_damping_height > 0.0 .OR. &
1373	rayleigh_damping_height < zu(nzb) ) THEN
1374	WRITE( message_string, * ) 'rayleigh_damping_height = ', &
1375	rayleigh_damping_height, ' out of range [0.0,', zu(nzb), ']'
1376	CALL message( 'check_parameters', 'PA0079', 1, 2, 0, 6, 0 )
1377	ENDIF
1378	ENDIF
1379	ENDIF
1380
1381	!
1382	!-- Check limiters for Upstream-Spline scheme
1383	IF ( overshoot_limit_u < 0.0 .OR. overshoot_limit_v < 0.0 .OR. &
1384	overshoot_limit_w < 0.0 .OR. overshoot_limit_pt < 0.0 .OR. &
1385	overshoot_limit_e < 0.0 ) THEN
1386	message_string = 'overshoot_limit_... < 0.0 is not allowed'
1387	CALL message( 'check_parameters', 'PA0080', 1, 2, 0, 6, 0 )
1388	ENDIF
1389	IF ( ups_limit_u < 0.0 .OR. ups_limit_v < 0.0 .OR. ups_limit_w < 0.0 .OR. &
1390	ups_limit_pt < 0.0 .OR. ups_limit_e < 0.0 ) THEN
1391	message_string = 'ups_limit_... < 0.0 is not allowed'
1392	CALL message( 'check_parameters', 'PA0081', 1, 2, 0, 6, 0 )
1393	ENDIF
1394
1395	!
1396	!-- Check number of chosen statistic regions. More than 10 regions are not
1397	!-- allowed, because so far no more than 10 corresponding output files can
1398	!-- be opened (cf. check_open)
1399	IF ( statistic_regions > 9 .OR. statistic_regions < 0 ) THEN
1400	WRITE ( message_string, * ) 'number of statistic_regions = ', &
1401	statistic_regions+1, ' but only 10 regions are allowed'
1402	CALL message( 'check_parameters', 'PA0082', 1, 2, 0, 6, 0 )
1403	ENDIF
1404	IF ( normalizing_region > statistic_regions .OR. &
1405	normalizing_region < 0) THEN
1406	WRITE ( message_string, * ) 'normalizing_region = ', &
1407	normalizing_region, ' must be >= 0 and <= ',statistic_regions, &
1408	' (value of statistic_regions)'
1409	CALL message( 'check_parameters', 'PA0083', 1, 2, 0, 6, 0 )
1410	ENDIF
1411
1412	!
1413	!-- Check the interval for sorting particles.
1414	!-- Using particles as cloud droplets requires sorting after each timestep.
1415	IF ( dt_sort_particles /= 0.0 .AND. cloud_droplets ) THEN
1416	dt_sort_particles = 0.0
1417	message_string = 'dt_sort_particles is reset to 0.0 because of cloud' //&
1418	'_droplets = .TRUE.'
1419	CALL message( 'check_parameters', 'PA0084', 0, 1, 0, 6, 0 )
1420	ENDIF
1421
1422	!
1423	!-- Set the default intervals for data output, if necessary
1424	!-- NOTE: dt_dosp has already been set in package_parin
1425	IF ( dt_data_output /= 9999999.9 ) THEN
1426	IF ( dt_dopr == 9999999.9 ) dt_dopr = dt_data_output
1427	IF ( dt_dopts == 9999999.9 ) dt_dopts = dt_data_output
1428	IF ( dt_do2d_xy == 9999999.9 ) dt_do2d_xy = dt_data_output
1429	IF ( dt_do2d_xz == 9999999.9 ) dt_do2d_xz = dt_data_output
1430	IF ( dt_do2d_yz == 9999999.9 ) dt_do2d_yz = dt_data_output
1431	IF ( dt_do3d == 9999999.9 ) dt_do3d = dt_data_output
1432	IF ( dt_data_output_av == 9999999.9 ) dt_data_output_av = dt_data_output
1433	ENDIF
1434
1435	!
1436	!-- Set the default skip time intervals for data output, if necessary
1437	IF ( skip_time_dopr == 9999999.9 ) &
1438	skip_time_dopr = skip_time_data_output
1439	IF ( skip_time_dosp == 9999999.9 ) &
1440	skip_time_dosp = skip_time_data_output
1441	IF ( skip_time_do2d_xy == 9999999.9 ) &
1442	skip_time_do2d_xy = skip_time_data_output
1443	IF ( skip_time_do2d_xz == 9999999.9 ) &
1444	skip_time_do2d_xz = skip_time_data_output
1445	IF ( skip_time_do2d_yz == 9999999.9 ) &
1446	skip_time_do2d_yz = skip_time_data_output
1447	IF ( skip_time_do3d == 9999999.9 ) &
1448	skip_time_do3d = skip_time_data_output
1449	IF ( skip_time_data_output_av == 9999999.9 ) &
1450	skip_time_data_output_av = skip_time_data_output
1451
1452	!
1453	!-- Check the average intervals (first for 3d-data, then for profiles and
1454	!-- spectra)
1455	IF ( averaging_interval > dt_data_output_av ) THEN
1456	WRITE( message_string, * ) 'averaging_interval = ', &
1457	averaging_interval, ' must be <= dt_data_output = ', dt_data_output
1458	CALL message( 'check_parameters', 'PA0085', 1, 2, 0, 6, 0 )
1459	ENDIF
1460
1461	IF ( averaging_interval_pr == 9999999.9 ) THEN
1462	averaging_interval_pr = averaging_interval
1463	ENDIF
1464
1465	IF ( averaging_interval_pr > dt_dopr ) THEN
1466	WRITE( message_string, * ) 'averaging_interval_pr = ', &
1467	averaging_interval_pr, ' must be <= dt_dopr = ', dt_dopr
1468	CALL message( 'check_parameters', 'PA0086', 1, 2, 0, 6, 0 )
1469	ENDIF
1470
1471	IF ( averaging_interval_sp == 9999999.9 ) THEN
1472	averaging_interval_sp = averaging_interval
1473	ENDIF
1474
1475	IF ( averaging_interval_sp > dt_dosp ) THEN
1476	WRITE( message_string, * ) 'averaging_interval_sp = ', &
1477	averaging_interval_sp, ' must be <= dt_dosp = ', dt_dosp
1478	CALL message( 'check_parameters', 'PA0087', 1, 2, 0, 6, 0 )
1479	ENDIF
1480
1481	!
1482	!-- Set the default interval for profiles entering the temporal average
1483	IF ( dt_averaging_input_pr == 9999999.9 ) THEN
1484	dt_averaging_input_pr = dt_averaging_input
1485	ENDIF
1486
1487	!
1488	!-- Set the default interval for the output of timeseries to a reasonable
1489	!-- value (tries to minimize the number of calls of flow_statistics)
1490	IF ( dt_dots == 9999999.9 ) THEN
1491	IF ( averaging_interval_pr == 0.0 ) THEN
1492	dt_dots = MIN( dt_run_control, dt_dopr )
1493	ELSE
1494	dt_dots = MIN( dt_run_control, dt_averaging_input_pr )
1495	ENDIF
1496	ENDIF
1497
1498	!
1499	!-- Check the sample rate for averaging (first for 3d-data, then for profiles)
1500	IF ( dt_averaging_input > averaging_interval ) THEN
1501	WRITE( message_string, * ) 'dt_averaging_input = ', &
1502	dt_averaging_input, ' must be <= averaging_interval = ', &
1503	averaging_interval
1504	CALL message( 'check_parameters', 'PA0088', 1, 2, 0, 6, 0 )
1505	ENDIF
1506
1507	IF ( dt_averaging_input_pr > averaging_interval_pr ) THEN
1508	WRITE( message_string, * ) 'dt_averaging_input_pr = ', &
1509	dt_averaging_input_pr, ' must be <= averaging_interval_pr = ', &
1510	averaging_interval_pr
1511	CALL message( 'check_parameters', 'PA0089', 1, 2, 0, 6, 0 )
1512	ENDIF
1513
1514	!
1515	!-- Set the default value for the integration interval of precipitation amount
1516	IF ( precipitation ) THEN
1517	IF ( precipitation_amount_interval == 9999999.9 ) THEN
1518	precipitation_amount_interval = dt_do2d_xy
1519	ELSE
1520	IF ( precipitation_amount_interval > dt_do2d_xy ) THEN
1521	WRITE( message_string, * ) 'precipitation_amount_interval = ', &
1522	precipitation_amount_interval, ' must not be larger than ', &
1523	'dt_do2d_xy = ', dt_do2d_xy
1524	CALL message( 'check_parameters', 'PA0090', 1, 2, 0, 6, 0 )
1525	ENDIF
1526	ENDIF
1527	ENDIF
1528
1529	!
1530	!-- Determine the number of output profiles and check whether they are
1531	!-- permissible
1532	DO WHILE ( data_output_pr(dopr_n+1) /= ' ' )
1533
1534	dopr_n = dopr_n + 1
1535	i = dopr_n
1536
1537	!
1538	!-- Determine internal profile number (for hom, homs)
1539	!-- and store height levels
1540	SELECT CASE ( TRIM( data_output_pr(i) ) )
1541
1542	CASE ( 'u', '#u' )
1543	dopr_index(i) = 1
1544	dopr_unit(i) = 'm/s'
1545	hom(:,2,1,:) = SPREAD( zu, 2, statistic_regions+1 )
1546	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1547	dopr_initial_index(i) = 5
1548	hom(:,2,5,:) = SPREAD( zu, 2, statistic_regions+1 )
1549	data_output_pr(i) = data_output_pr(i)(2:)
1550	ENDIF
1551
1552	CASE ( 'v', '#v' )
1553	dopr_index(i) = 2
1554	dopr_unit(i) = 'm/s'
1555	hom(:,2,2,:) = SPREAD( zu, 2, statistic_regions+1 )
1556	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1557	dopr_initial_index(i) = 6
1558	hom(:,2,6,:) = SPREAD( zu, 2, statistic_regions+1 )
1559	data_output_pr(i) = data_output_pr(i)(2:)
1560	ENDIF
1561
1562	CASE ( 'w' )
1563	dopr_index(i) = 3
1564	dopr_unit(i) = 'm/s'
1565	hom(:,2,3,:) = SPREAD( zw, 2, statistic_regions+1 )
1566
1567	CASE ( 'pt', '#pt' )
1568	IF ( .NOT. cloud_physics ) THEN
1569	dopr_index(i) = 4
1570	dopr_unit(i) = 'K'
1571	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1572	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1573	dopr_initial_index(i) = 7
1574	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1575	hom(nzb,2,7,:) = 0.0 ! because zu(nzb) is negative
1576	data_output_pr(i) = data_output_pr(i)(2:)
1577	ENDIF
1578	ELSE
1579	dopr_index(i) = 43
1580	dopr_unit(i) = 'K'
1581	hom(:,2,43,:) = SPREAD( zu, 2, statistic_regions+1 )
1582	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1583	dopr_initial_index(i) = 28
1584	hom(:,2,28,:) = SPREAD( zu, 2, statistic_regions+1 )
1585	hom(nzb,2,28,:) = 0.0 ! because zu(nzb) is negative
1586	data_output_pr(i) = data_output_pr(i)(2:)
1587	ENDIF
1588	ENDIF
1589
1590	CASE ( 'e' )
1591	dopr_index(i) = 8
1592	dopr_unit(i) = 'm2/s2'
1593	hom(:,2,8,:) = SPREAD( zu, 2, statistic_regions+1 )
1594	hom(nzb,2,8,:) = 0.0
1595
1596	CASE ( 'km', '#km' )
1597	dopr_index(i) = 9
1598	dopr_unit(i) = 'm2/s'
1599	hom(:,2,9,:) = SPREAD( zu, 2, statistic_regions+1 )
1600	hom(nzb,2,9,:) = 0.0
1601	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1602	dopr_initial_index(i) = 23
1603	hom(:,2,23,:) = hom(:,2,9,:)
1604	data_output_pr(i) = data_output_pr(i)(2:)
1605	ENDIF
1606
1607	CASE ( 'kh', '#kh' )
1608	dopr_index(i) = 10
1609	dopr_unit(i) = 'm2/s'
1610	hom(:,2,10,:) = SPREAD( zu, 2, statistic_regions+1 )
1611	hom(nzb,2,10,:) = 0.0
1612	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1613	dopr_initial_index(i) = 24
1614	hom(:,2,24,:) = hom(:,2,10,:)
1615	data_output_pr(i) = data_output_pr(i)(2:)
1616	ENDIF
1617
1618	CASE ( 'l', '#l' )
1619	dopr_index(i) = 11
1620	dopr_unit(i) = 'm'
1621	hom(:,2,11,:) = SPREAD( zu, 2, statistic_regions+1 )
1622	hom(nzb,2,11,:) = 0.0
1623	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1624	dopr_initial_index(i) = 25
1625	hom(:,2,25,:) = hom(:,2,11,:)
1626	data_output_pr(i) = data_output_pr(i)(2:)
1627	ENDIF
1628
1629	CASE ( 'w"u"' )
1630	dopr_index(i) = 12
1631	dopr_unit(i) = 'm2/s2'
1632	hom(:,2,12,:) = SPREAD( zw, 2, statistic_regions+1 )
1633	IF ( prandtl_layer ) hom(nzb,2,12,:) = zu(1)
1634
1635	CASE ( 'wu' )
1636	dopr_index(i) = 13
1637	dopr_unit(i) = 'm2/s2'
1638	hom(:,2,13,:) = SPREAD( zw, 2, statistic_regions+1 )
1639
1640	CASE ( 'w"v"' )
1641	dopr_index(i) = 14
1642	dopr_unit(i) = 'm2/s2'
1643	hom(:,2,14,:) = SPREAD( zw, 2, statistic_regions+1 )
1644	IF ( prandtl_layer ) hom(nzb,2,14,:) = zu(1)
1645
1646	CASE ( 'wv' )
1647	dopr_index(i) = 15
1648	dopr_unit(i) = 'm2/s2'
1649	hom(:,2,15,:) = SPREAD( zw, 2, statistic_regions+1 )
1650
1651	CASE ( 'w"pt"' )
1652	dopr_index(i) = 16
1653	dopr_unit(i) = 'K m/s'
1654	hom(:,2,16,:) = SPREAD( zw, 2, statistic_regions+1 )
1655
1656	CASE ( 'wpt' )
1657	dopr_index(i) = 17
1658	dopr_unit(i) = 'K m/s'
1659	hom(:,2,17,:) = SPREAD( zw, 2, statistic_regions+1 )
1660
1661	CASE ( 'wpt' )
1662	dopr_index(i) = 18
1663	dopr_unit(i) = 'K m/s'
1664	hom(:,2,18,:) = SPREAD( zw, 2, statistic_regions+1 )
1665
1666	CASE ( 'wu' )
1667	dopr_index(i) = 19
1668	dopr_unit(i) = 'm2/s2'
1669	hom(:,2,19,:) = SPREAD( zw, 2, statistic_regions+1 )
1670	IF ( prandtl_layer ) hom(nzb,2,19,:) = zu(1)
1671
1672	CASE ( 'wv' )
1673	dopr_index(i) = 20
1674	dopr_unit(i) = 'm2/s2'
1675	hom(:,2,20,:) = SPREAD( zw, 2, statistic_regions+1 )
1676	IF ( prandtl_layer ) hom(nzb,2,20,:) = zu(1)
1677
1678	CASE ( 'wptBC' )
1679	dopr_index(i) = 21
1680	dopr_unit(i) = 'K m/s'
1681	hom(:,2,21,:) = SPREAD( zw, 2, statistic_regions+1 )
1682
1683	CASE ( 'wptBC' )
1684	dopr_index(i) = 22
1685	dopr_unit(i) = 'K m/s'
1686	hom(:,2,22,:) = SPREAD( zw, 2, statistic_regions+1 )
1687
1688	CASE ( 'sa', '#sa' )
1689	IF ( .NOT. ocean ) THEN
1690	message_string = 'data_output_pr = ' // &
1691	TRIM( data_output_pr(i) ) // ' is not imp' // &
1692	'lemented for ocean = .FALSE.'
1693	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
1694	ELSE
1695	dopr_index(i) = 23
1696	dopr_unit(i) = 'psu'
1697	hom(:,2,23,:) = SPREAD( zu, 2, statistic_regions+1 )
1698	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1699	dopr_initial_index(i) = 26
1700	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1701	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1702	data_output_pr(i) = data_output_pr(i)(2:)
1703	ENDIF
1704	ENDIF
1705
1706	CASE ( 'u*2' )
1707	dopr_index(i) = 30
1708	dopr_unit(i) = 'm2/s2'
1709	hom(:,2,30,:) = SPREAD( zu, 2, statistic_regions+1 )
1710
1711	CASE ( 'v*2' )
1712	dopr_index(i) = 31
1713	dopr_unit(i) = 'm2/s2'
1714	hom(:,2,31,:) = SPREAD( zu, 2, statistic_regions+1 )
1715
1716	CASE ( 'w*2' )
1717	dopr_index(i) = 32
1718	dopr_unit(i) = 'm2/s2'
1719	hom(:,2,32,:) = SPREAD( zw, 2, statistic_regions+1 )
1720
1721	CASE ( 'pt*2' )
1722	dopr_index(i) = 33
1723	dopr_unit(i) = 'K2'
1724	hom(:,2,33,:) = SPREAD( zu, 2, statistic_regions+1 )
1725
1726	CASE ( 'e*' )
1727	dopr_index(i) = 34
1728	dopr_unit(i) = 'm2/s2'
1729	hom(:,2,34,:) = SPREAD( zu, 2, statistic_regions+1 )
1730
1731	CASE ( 'w2pt' )
1732	dopr_index(i) = 35
1733	dopr_unit(i) = 'K m2/s2'
1734	hom(:,2,35,:) = SPREAD( zw, 2, statistic_regions+1 )
1735
1736	CASE ( 'wpt2' )
1737	dopr_index(i) = 36
1738	dopr_unit(i) = 'K2 m/s'
1739	hom(:,2,36,:) = SPREAD( zw, 2, statistic_regions+1 )
1740
1741	CASE ( 'we' )
1742	dopr_index(i) = 37
1743	dopr_unit(i) = 'm3/s3'
1744	hom(:,2,37,:) = SPREAD( zw, 2, statistic_regions+1 )
1745
1746	CASE ( 'w*3' )
1747	dopr_index(i) = 38
1748	dopr_unit(i) = 'm3/s3'
1749	hom(:,2,38,:) = SPREAD( zw, 2, statistic_regions+1 )
1750
1751	CASE ( 'Sw' )
1752	dopr_index(i) = 39
1753	dopr_unit(i) = 'none'
1754	hom(:,2,39,:) = SPREAD( zw, 2, statistic_regions+1 )
1755
1756	CASE ( 'p' )
1757	dopr_index(i) = 40
1758	dopr_unit(i) = 'Pa'
1759	hom(:,2,40,:) = SPREAD( zu, 2, statistic_regions+1 )
1760
1761	CASE ( 'q', '#q' )
1762	IF ( .NOT. humidity ) THEN
1763	message_string = 'data_output_pr = ' // &
1764	TRIM( data_output_pr(i) ) // ' is not imp' // &
1765	'lemented for humidity = .FALSE.'
1766	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1767	ELSE
1768	dopr_index(i) = 41
1769	dopr_unit(i) = 'kg/kg'
1770	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1771	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1772	dopr_initial_index(i) = 26
1773	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1774	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1775	data_output_pr(i) = data_output_pr(i)(2:)
1776	ENDIF
1777	ENDIF
1778
1779	CASE ( 's', '#s' )
1780	IF ( .NOT. passive_scalar ) THEN
1781	message_string = 'data_output_pr = ' // &
1782	TRIM( data_output_pr(i) ) // ' is not imp' // &
1783	'lemented for passive_scalar = .FALSE.'
1784	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1785	ELSE
1786	dopr_index(i) = 41
1787	dopr_unit(i) = 'kg/m3'
1788	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1789	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1790	dopr_initial_index(i) = 26
1791	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1792	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1793	data_output_pr(i) = data_output_pr(i)(2:)
1794	ENDIF
1795	ENDIF
1796
1797	CASE ( 'qv', '#qv' )
1798	IF ( .NOT. cloud_physics ) THEN
1799	dopr_index(i) = 41
1800	dopr_unit(i) = 'kg/kg'
1801	hom(:,2,41,:) = SPREAD( zu, 2, statistic_regions+1 )
1802	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1803	dopr_initial_index(i) = 26
1804	hom(:,2,26,:) = SPREAD( zu, 2, statistic_regions+1 )
1805	hom(nzb,2,26,:) = 0.0 ! weil zu(nzb) negativ ist
1806	data_output_pr(i) = data_output_pr(i)(2:)
1807	ENDIF
1808	ELSE
1809	dopr_index(i) = 42
1810	dopr_unit(i) = 'kg/kg'
1811	hom(:,2,42,:) = SPREAD( zu, 2, statistic_regions+1 )
1812	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1813	dopr_initial_index(i) = 27
1814	hom(:,2,27,:) = SPREAD( zu, 2, statistic_regions+1 )
1815	hom(nzb,2,27,:) = 0.0 ! weil zu(nzb) negativ ist
1816	data_output_pr(i) = data_output_pr(i)(2:)
1817	ENDIF
1818	ENDIF
1819
1820	CASE ( 'lpt', '#lpt' )
1821	IF ( .NOT. cloud_physics ) THEN
1822	message_string = 'data_output_pr = ' // &
1823	TRIM( data_output_pr(i) ) // ' is not imp' // &
1824	'lemented for cloud_physics = .FALSE.'
1825	CALL message( 'check_parameters', 'PA0094', 1, 2, 0, 6, 0 )
1826	ELSE
1827	dopr_index(i) = 4
1828	dopr_unit(i) = 'K'
1829	hom(:,2,4,:) = SPREAD( zu, 2, statistic_regions+1 )
1830	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1831	dopr_initial_index(i) = 7
1832	hom(:,2,7,:) = SPREAD( zu, 2, statistic_regions+1 )
1833	hom(nzb,2,7,:) = 0.0 ! weil zu(nzb) negativ ist
1834	data_output_pr(i) = data_output_pr(i)(2:)
1835	ENDIF
1836	ENDIF
1837
1838	CASE ( 'vpt', '#vpt' )
1839	dopr_index(i) = 44
1840	dopr_unit(i) = 'K'
1841	hom(:,2,44,:) = SPREAD( zu, 2, statistic_regions+1 )
1842	IF ( data_output_pr(i)(1:1) == '#' ) THEN
1843	dopr_initial_index(i) = 29
1844	hom(:,2,29,:) = SPREAD( zu, 2, statistic_regions+1 )
1845	hom(nzb,2,29,:) = 0.0 ! weil zu(nzb) negativ ist
1846	data_output_pr(i) = data_output_pr(i)(2:)
1847	ENDIF
1848
1849	CASE ( 'w"vpt"' )
1850	dopr_index(i) = 45
1851	dopr_unit(i) = 'K m/s'
1852	hom(:,2,45,:) = SPREAD( zw, 2, statistic_regions+1 )
1853
1854	CASE ( 'wvpt' )
1855	dopr_index(i) = 46
1856	dopr_unit(i) = 'K m/s'
1857	hom(:,2,46,:) = SPREAD( zw, 2, statistic_regions+1 )
1858
1859	CASE ( 'wvpt' )
1860	dopr_index(i) = 47
1861	dopr_unit(i) = 'K m/s'
1862	hom(:,2,47,:) = SPREAD( zw, 2, statistic_regions+1 )
1863
1864	CASE ( 'w"q"' )
1865	IF ( .NOT. humidity ) THEN
1866	message_string = 'data_output_pr = ' // &
1867	TRIM( data_output_pr(i) ) // ' is not imp' // &
1868	'lemented for humidity = .FALSE.'
1869	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1870	ELSE
1871	dopr_index(i) = 48
1872	dopr_unit(i) = 'kg/kg m/s'
1873	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1874	ENDIF
1875
1876	CASE ( 'wq' )
1877	IF ( .NOT. humidity ) THEN
1878	message_string = 'data_output_pr = ' // &
1879	TRIM( data_output_pr(i) ) // ' is not imp' // &
1880	'lemented for humidity = .FALSE.'
1881	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1882	ELSE
1883	dopr_index(i) = 49
1884	dopr_unit(i) = 'kg/kg m/s'
1885	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1886	ENDIF
1887
1888	CASE ( 'wq' )
1889	IF ( .NOT. humidity ) THEN
1890	message_string = 'data_output_pr = ' // &
1891	TRIM( data_output_pr(i) ) // ' is not imp' // &
1892	'lemented for humidity = .FALSE.'
1893	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
1894	ELSE
1895	dopr_index(i) = 50
1896	dopr_unit(i) = 'kg/kg m/s'
1897	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1898	ENDIF
1899
1900	CASE ( 'w"s"' )
1901	IF ( .NOT. passive_scalar ) THEN
1902	message_string = 'data_output_pr = ' // &
1903	TRIM( data_output_pr(i) ) // ' is not imp' // &
1904	'lemented for passive_scalar = .FALSE.'
1905	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1906	ELSE
1907	dopr_index(i) = 48
1908	dopr_unit(i) = 'kg/m3 m/s'
1909	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1910	ENDIF
1911
1912	CASE ( 'ws' )
1913	IF ( .NOT. passive_scalar ) THEN
1914	message_string = 'data_output_pr = ' // &
1915	TRIM( data_output_pr(i) ) // ' is not imp' // &
1916	'lemented for passive_scalar = .FALSE.'
1917	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1918	ELSE
1919	dopr_index(i) = 49
1920	dopr_unit(i) = 'kg/m3 m/s'
1921	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1922	ENDIF
1923
1924	CASE ( 'ws' )
1925	IF ( .NOT. passive_scalar ) THEN
1926	message_string = 'data_output_pr = ' // &
1927	TRIM( data_output_pr(i) ) // ' is not imp' // &
1928	'lemented for passive_scalar = .FALSE.'
1929	CALL message( 'check_parameters', 'PA0093', 1, 2, 0, 6, 0 )
1930	ELSE
1931	dopr_index(i) = 50
1932	dopr_unit(i) = 'kg/m3 m/s'
1933	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1934	ENDIF
1935
1936	CASE ( 'w"qv"' )
1937	IF ( humidity .AND. .NOT. cloud_physics ) &
1938	THEN
1939	dopr_index(i) = 48
1940	dopr_unit(i) = 'kg/kg m/s'
1941	hom(:,2,48,:) = SPREAD( zw, 2, statistic_regions+1 )
1942	ELSEIF( humidity .AND. cloud_physics ) THEN
1943	dopr_index(i) = 51
1944	dopr_unit(i) = 'kg/kg m/s'
1945	hom(:,2,51,:) = SPREAD( zw, 2, statistic_regions+1 )
1946	ELSE
1947	message_string = 'data_output_pr = ' // &
1948	TRIM( data_output_pr(i) ) // ' is not imp' // &
1949	'lemented for cloud_physics = .FALSE. an&' // &
1950	'd humidity = .FALSE.'
1951	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1952	ENDIF
1953
1954	CASE ( 'wqv' )
1955	IF ( humidity .AND. .NOT. cloud_physics ) &
1956	THEN
1957	dopr_index(i) = 49
1958	dopr_unit(i) = 'kg/kg m/s'
1959	hom(:,2,49,:) = SPREAD( zw, 2, statistic_regions+1 )
1960	ELSEIF( humidity .AND. cloud_physics ) THEN
1961	dopr_index(i) = 52
1962	dopr_unit(i) = 'kg/kg m/s'
1963	hom(:,2,52,:) = SPREAD( zw, 2, statistic_regions+1 )
1964	ELSE
1965	message_string = 'data_output_pr = ' // &
1966	TRIM( data_output_pr(i) ) // ' is not imp' // &
1967	'lemented for cloud_physics = .FALSE. an&' // &
1968	'd humidity = .FALSE.'
1969	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1970	ENDIF
1971
1972	CASE ( 'wqv' )
1973	IF ( humidity .AND. .NOT. cloud_physics ) &
1974	THEN
1975	dopr_index(i) = 50
1976	dopr_unit(i) = 'kg/kg m/s'
1977	hom(:,2,50,:) = SPREAD( zw, 2, statistic_regions+1 )
1978	ELSEIF( humidity .AND. cloud_physics ) THEN
1979	dopr_index(i) = 53
1980	dopr_unit(i) = 'kg/kg m/s'
1981	hom(:,2,53,:) = SPREAD( zw, 2, statistic_regions+1 )
1982	ELSE
1983	message_string = 'data_output_pr = ' // &
1984	TRIM( data_output_pr(i) ) // ' is not imp' // &
1985	'lemented for cloud_physics = .FALSE. an&' // &
1986	'd humidity = .FALSE.'
1987	CALL message( 'check_parameters', 'PA0095', 1, 2, 0, 6, 0 )
1988	ENDIF
1989
1990	CASE ( 'ql' )
1991	IF ( .NOT. cloud_physics .AND. .NOT. cloud_droplets ) THEN
1992	message_string = 'data_output_pr = ' // &
1993	TRIM( data_output_pr(i) ) // ' is not imp' // &
1994	'lemented for cloud_physics = .FALSE. or' // &
1995	'&cloud_droplets = .FALSE.'
1996	CALL message( 'check_parameters', 'PA0096', 1, 2, 0, 6, 0 )
1997	ELSE
1998	dopr_index(i) = 54
1999	dopr_unit(i) = 'kg/kg'
2000	hom(:,2,54,:) = SPREAD( zu, 2, statistic_regions+1 )
2001	ENDIF
2002
2003	CASE ( 'wuu*/dz' )
2004	dopr_index(i) = 55
2005	dopr_unit(i) = 'm2/s3'
2006	hom(:,2,55,:) = SPREAD( zu, 2, statistic_regions+1 )
2007
2008	CASE ( 'wp/dz' )
2009	dopr_index(i) = 56
2010	dopr_unit(i) = 'm2/s3'
2011	hom(:,2,56,:) = SPREAD( zw, 2, statistic_regions+1 )
2012
2013	CASE ( 'w"e/dz' )
2014	dopr_index(i) = 57
2015	dopr_unit(i) = 'm2/s3'
2016	hom(:,2,57,:) = SPREAD( zu, 2, statistic_regions+1 )
2017
2018	CASE ( 'u"pt"' )
2019	dopr_index(i) = 58
2020	dopr_unit(i) = 'K m/s'
2021	hom(:,2,58,:) = SPREAD( zu, 2, statistic_regions+1 )
2022
2023	CASE ( 'upt' )
2024	dopr_index(i) = 59
2025	dopr_unit(i) = 'K m/s'
2026	hom(:,2,59,:) = SPREAD( zu, 2, statistic_regions+1 )
2027
2028	CASE ( 'upt_t' )
2029	dopr_index(i) = 60
2030	dopr_unit(i) = 'K m/s'
2031	hom(:,2,60,:) = SPREAD( zu, 2, statistic_regions+1 )
2032
2033	CASE ( 'v"pt"' )
2034	dopr_index(i) = 61
2035	dopr_unit(i) = 'K m/s'
2036	hom(:,2,61,:) = SPREAD( zu, 2, statistic_regions+1 )
2037
2038	CASE ( 'vpt' )
2039	dopr_index(i) = 62
2040	dopr_unit(i) = 'K m/s'
2041	hom(:,2,62,:) = SPREAD( zu, 2, statistic_regions+1 )
2042
2043	CASE ( 'vpt_t' )
2044	dopr_index(i) = 63
2045	dopr_unit(i) = 'K m/s'
2046	hom(:,2,63,:) = SPREAD( zu, 2, statistic_regions+1 )
2047
2048	CASE ( 'rho' )
2049	dopr_index(i) = 64
2050	dopr_unit(i) = 'kg/m3'
2051	hom(:,2,64,:) = SPREAD( zu, 2, statistic_regions+1 )
2052
2053	CASE ( 'w"sa"' )
2054	IF ( .NOT. ocean ) THEN
2055	message_string = 'data_output_pr = ' // &
2056	TRIM( data_output_pr(i) ) // ' is not imp' // &
2057	'lemented for ocean = .FALSE.'
2058	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2059	ELSE
2060	dopr_index(i) = 65
2061	dopr_unit(i) = 'psu m/s'
2062	hom(:,2,65,:) = SPREAD( zw, 2, statistic_regions+1 )
2063	ENDIF
2064
2065	CASE ( 'wsa' )
2066	IF ( .NOT. ocean ) THEN
2067	message_string = 'data_output_pr = ' // &
2068	TRIM( data_output_pr(i) ) // ' is not imp' // &
2069	'lemented for ocean = .FALSE.'
2070	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2071	ELSE
2072	dopr_index(i) = 66
2073	dopr_unit(i) = 'psu m/s'
2074	hom(:,2,66,:) = SPREAD( zw, 2, statistic_regions+1 )
2075	ENDIF
2076
2077	CASE ( 'wsa' )
2078	IF ( .NOT. ocean ) THEN
2079	message_string = 'data_output_pr = ' // &
2080	TRIM( data_output_pr(i) ) // ' is not imp' // &
2081	'lemented for ocean = .FALSE.'
2082	CALL message( 'check_parameters', 'PA0091', 1, 2, 0, 6, 0 )
2083	ELSE
2084	dopr_index(i) = 67
2085	dopr_unit(i) = 'psu m/s'
2086	hom(:,2,67,:) = SPREAD( zw, 2, statistic_regions+1 )
2087	ENDIF
2088
2089	CASE ( 'wp' )
2090	dopr_index(i) = 68
2091	dopr_unit(i) = 'm3/s3'
2092	hom(:,2,68,:) = SPREAD( zu, 2, statistic_regions+1 )
2093
2094	CASE ( 'w"e' )
2095	dopr_index(i) = 69
2096	dopr_unit(i) = 'm3/s3'
2097	hom(:,2,69,:) = SPREAD( zu, 2, statistic_regions+1 )
2098
2099	CASE ( 'q*2' )
2100	IF ( .NOT. humidity ) THEN
2101	message_string = 'data_output_pr = ' // &
2102	TRIM( data_output_pr(i) ) // ' is not imp' // &
2103	'lemented for humidity = .FALSE.'
2104	CALL message( 'check_parameters', 'PA0092', 1, 2, 0, 6, 0 )
2105	ELSE
2106	dopr_index(i) = 70
2107	dopr_unit(i) = 'kg2/kg2'
2108	hom(:,2,70,:) = SPREAD( zu, 2, statistic_regions+1 )
2109	ENDIF
2110
2111	CASE DEFAULT
2112
2113	CALL user_check_data_output_pr( data_output_pr(i), i, unit )
2114
2115	IF ( unit == 'illegal' ) THEN
2116	IF ( data_output_pr_user(1) /= ' ' ) THEN
2117	message_string = 'illegal value for data_output_pr or ' // &
2118	'data_output_pr_user = "' // &
2119	TRIM( data_output_pr(i) ) // '"'
2120	CALL message( 'check_parameters', 'PA0097', 1, 2, 0, 6, 0 )
2121	ELSE
2122	message_string = 'illegal value for data_output_pr = "' // &
2123	TRIM( data_output_pr(i) ) // '"'
2124	CALL message( 'check_parameters', 'PA0098', 1, 2, 0, 6, 0 )
2125	ENDIF
2126	ENDIF
2127
2128	END SELECT
2129	!
2130	!-- Check to which of the predefined coordinate systems the profile belongs
2131	DO k = 1, crmax
2132	IF ( INDEX( cross_profiles(k), ' '//TRIM( data_output_pr(i) )//' ' ) &
2133	/=0 ) &
2134	THEN
2135	dopr_crossindex(i) = k
2136	EXIT
2137	ENDIF
2138	ENDDO
2139	!
2140	!-- Generate the text for the labels of the PROFIL output file. "-characters
2141	!-- must be substituted, otherwise PROFIL would interpret them as TeX
2142	!-- control characters
2143	dopr_label(i) = data_output_pr(i)
2144	position = INDEX( dopr_label(i) , '"' )
2145	DO WHILE ( position /= 0 )
2146	dopr_label(i)(position:position) = ''''
2147	position = INDEX( dopr_label(i) , '"' )
2148	ENDDO
2149
2150	ENDDO
2151
2152	!
2153	!-- y-value range of the coordinate system (PROFIL).
2154	!-- x-value range determined in plot_1d.
2155	IF ( .NOT. ocean ) THEN
2156	cross_uymin = 0.0
2157	IF ( z_max_do1d == -1.0 ) THEN
2158	cross_uymax = zu(nzt+1)
2159	ELSEIF ( z_max_do1d < zu(nzb+1) .OR. z_max_do1d > zu(nzt+1) ) THEN
2160	WRITE( message_string, * ) 'z_max_do1d = ', z_max_do1d, ' must ', &
2161	'be >= ', zu(nzb+1), ' or <= ', zu(nzt+1)
2162	CALL message( 'check_parameters', 'PA0099', 1, 2, 0, 6, 0 )
2163	ELSE
2164	cross_uymax = z_max_do1d
2165	ENDIF
2166	ENDIF
2167
2168	!
2169	!-- Check whether the chosen normalizing factor for the coordinate systems is
2170	!-- permissible
2171	DO i = 1, crmax
2172	SELECT CASE ( TRIM( cross_normalized_x(i) ) ) ! TRIM required on IBM
2173
2174	CASE ( '', 'wpt0', 'ws2', 'tsw2', 'ws3', 'ws2tsw', 'wstsw2' )
2175	j = 0
2176
2177	CASE DEFAULT
2178	message_string = 'unknown normalization method cross_normali' // &
2179	'zed_x = "' // TRIM( cross_normalized_x(i) ) // &
2180	'"'
2181	CALL message( 'check_parameters', 'PA0100', 1, 2, 0, 6, 0 )
2182
2183	END SELECT
2184	SELECT CASE ( TRIM( cross_normalized_y(i) ) ) ! TRIM required on IBM
2185
2186	CASE ( '', 'z_i' )
2187	j = 0
2188
2189	CASE DEFAULT
2190	message_string = 'unknown normalization method cross_normali' // &
2191	'zed_y = "' // TRIM( cross_normalized_y(i) ) // &
2192	'"'
2193	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2194
2195	END SELECT
2196	ENDDO
2197	!
2198	!-- Check normalized y-value range of the coordinate system (PROFIL)
2199	IF ( z_max_do1d_normalized /= -1.0 .AND. z_max_do1d_normalized <= 0.0 ) &
2200	THEN
2201	WRITE( message_string, * ) 'z_max_do1d_normalized = ', &
2202	z_max_do1d_normalized, ' must be >= 0.0'
2203	CALL message( 'check_parameters', 'PA0101', 1, 2, 0, 6, 0 )
2204	ENDIF
2205
2206
2207	!
2208	!-- Append user-defined data output variables to the standard data output
2209	IF ( data_output_user(1) /= ' ' ) THEN
2210	i = 1
2211	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2212	i = i + 1
2213	ENDDO
2214	j = 1
2215	DO WHILE ( data_output_user(j) /= ' ' .AND. j <= 100 )
2216	IF ( i > 100 ) THEN
2217	message_string = 'number of output quantitities given by data' // &
2218	'_output and data_output_user exceeds the limit of 100'
2219	CALL message( 'check_parameters', 'PA0102', 1, 2, 0, 6, 0 )
2220	ENDIF
2221	data_output(i) = data_output_user(j)
2222	i = i + 1
2223	j = j + 1
2224	ENDDO
2225	ENDIF
2226
2227	!
2228	!-- Check and set steering parameters for 2d/3d data output and averaging
2229	i = 1
2230	DO WHILE ( data_output(i) /= ' ' .AND. i <= 100 )
2231	!
2232	!-- Check for data averaging
2233	ilen = LEN_TRIM( data_output(i) )
2234	j = 0 ! no data averaging
2235	IF ( ilen > 3 ) THEN
2236	IF ( data_output(i)(ilen-2:ilen) == '_av' ) THEN
2237	j = 1 ! data averaging
2238	data_output(i) = data_output(i)(1:ilen-3)
2239	ENDIF
2240	ENDIF
2241	!
2242	!-- Check for cross section or volume data
2243	ilen = LEN_TRIM( data_output(i) )
2244	k = 0 ! 3d data
2245	var = data_output(i)(1:ilen)
2246	IF ( ilen > 3 ) THEN
2247	IF ( data_output(i)(ilen-2:ilen) == '_xy' .OR. &
2248	data_output(i)(ilen-2:ilen) == '_xz' .OR. &
2249	data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2250	k = 1 ! 2d data
2251	var = data_output(i)(1:ilen-3)
2252	ENDIF
2253	ENDIF
2254	!
2255	!-- Check for allowed value and set units
2256	SELECT CASE ( TRIM( var ) )
2257
2258	CASE ( 'e' )
2259	IF ( constant_diffusion ) THEN
2260	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2261	'res constant_diffusion = .FALSE.'
2262	CALL message( 'check_parameters', 'PA0103', 1, 2, 0, 6, 0 )
2263	ENDIF
2264	unit = 'm2/s2'
2265
2266	CASE ( 'pc', 'pr' )
2267	IF ( .NOT. particle_advection ) THEN
2268	message_string = 'output of "' // TRIM( var ) // '" requir' // &
2269	'es a "particles_par"-NAMELIST in the parameter file (PARIN)'
2270	CALL message( 'check_parameters', 'PA0104', 1, 2, 0, 6, 0 )
2271	ENDIF
2272	IF ( TRIM( var ) == 'pc' ) unit = 'number'
2273	IF ( TRIM( var ) == 'pr' ) unit = 'm'
2274
2275	CASE ( 'q', 'vpt' )
2276	IF ( .NOT. humidity ) THEN
2277	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2278	'res humidity = .TRUE.'
2279	CALL message( 'check_parameters', 'PA0105', 1, 2, 0, 6, 0 )
2280	ENDIF
2281	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
2282	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
2283
2284	CASE ( 'ql' )
2285	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
2286	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2287	'res cloud_physics = .TRUE. or cloud_droplets = .TRUE.'
2288	CALL message( 'check_parameters', 'PA0106', 1, 2, 0, 6, 0 )
2289	ENDIF
2290	unit = 'kg/kg'
2291
2292	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
2293	IF ( .NOT. cloud_droplets ) THEN
2294	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2295	'res cloud_droplets = .TRUE.'
2296	CALL message( 'check_parameters', 'PA0107', 1, 2, 0, 6, 0 )
2297	ENDIF
2298	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
2299	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
2300	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
2301
2302	CASE ( 'qv' )
2303	IF ( .NOT. cloud_physics ) THEN
2304	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2305	'res cloud_physics = .TRUE.'
2306	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2307	ENDIF
2308	unit = 'kg/kg'
2309
2310	CASE ( 'rho' )
2311	IF ( .NOT. ocean ) THEN
2312	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2313	'res ocean = .TRUE.'
2314	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2315	ENDIF
2316	unit = 'kg/m3'
2317
2318	CASE ( 's' )
2319	IF ( .NOT. passive_scalar ) THEN
2320	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2321	'res passive_scalar = .TRUE.'
2322	CALL message( 'check_parameters', 'PA0110', 1, 2, 0, 6, 0 )
2323	ENDIF
2324	unit = 'conc'
2325
2326	CASE ( 'sa' )
2327	IF ( .NOT. ocean ) THEN
2328	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2329	'res ocean = .TRUE.'
2330	CALL message( 'check_parameters', 'PA0109', 1, 2, 0, 6, 0 )
2331	ENDIF
2332	unit = 'psu'
2333
2334	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0' )
2335	IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN
2336	message_string = 'illegal value for data_output: "' // &
2337	TRIM( var ) // '" & only 2d-horizontal ' // &
2338	'cross sections are allowed for this value'
2339	CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 )
2340	ENDIF
2341	IF ( TRIM( var ) == 'lwp*' .AND. .NOT. cloud_physics ) THEN
2342	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2343	'res cloud_physics = .TRUE.'
2344	CALL message( 'check_parameters', 'PA0108', 1, 2, 0, 6, 0 )
2345	ENDIF
2346	IF ( TRIM( var ) == 'pra*' .AND. .NOT. precipitation ) THEN
2347	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2348	'res precipitation = .TRUE.'
2349	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2350	ENDIF
2351	IF ( TRIM( var ) == 'pra*' .AND. j == 1 ) THEN
2352	message_string = 'temporal averaging of precipitation ' // &
2353	'amount "' // TRIM( var ) // '" is not possible'
2354	CALL message( 'check_parameters', 'PA0113', 1, 2, 0, 6, 0 )
2355	ENDIF
2356	IF ( TRIM( var ) == 'prr*' .AND. .NOT. precipitation ) THEN
2357	message_string = 'output of "' // TRIM( var ) // '" requi' // &
2358	'res precipitation = .TRUE.'
2359	CALL message( 'check_parameters', 'PA0112', 1, 2, 0, 6, 0 )
2360	ENDIF
2361
2362
2363	IF ( TRIM( var ) == 'u*' ) unit = 'm/s'
2364	IF ( TRIM( var ) == 't*' ) unit = 'K'
2365	IF ( TRIM( var ) == 'lwp' ) unit = 'kg/kgm'
2366	IF ( TRIM( var ) == 'pra*' ) unit = 'mm'
2367	IF ( TRIM( var ) == 'prr*' ) unit = 'mm/s'
2368	IF ( TRIM( var ) == 'z0*' ) unit = 'm'
2369
2370	CASE ( 'p', 'pt', 'u', 'v', 'w' )
2371	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
2372	IF ( TRIM( var ) == 'pt' ) unit = 'K'
2373	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
2374	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
2375	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
2376	CONTINUE
2377
2378	CASE DEFAULT
2379	CALL user_check_data_output( var, unit )
2380
2381	IF ( unit == 'illegal' ) THEN
2382	IF ( data_output_user(1) /= ' ' ) THEN
2383	message_string = 'illegal value for data_output or ' // &
2384	'data_output_user = "' // TRIM( data_output(i) ) // '"'
2385	CALL message( 'check_parameters', 'PA0114', 1, 2, 0, 6, 0 )
2386	ELSE
2387	message_string = 'illegal value for data_output =' // &
2388	TRIM( data_output(i) ) // '"'
2389	CALL message( 'check_parameters', 'PA0115', 1, 2, 0, 6, 0 )
2390	ENDIF
2391	ENDIF
2392
2393	END SELECT
2394	!
2395	!-- Set the internal steering parameters appropriately
2396	IF ( k == 0 ) THEN
2397	do3d_no(j) = do3d_no(j) + 1
2398	do3d(j,do3d_no(j)) = data_output(i)
2399	do3d_unit(j,do3d_no(j)) = unit
2400	ELSE
2401	do2d_no(j) = do2d_no(j) + 1
2402	do2d(j,do2d_no(j)) = data_output(i)
2403	do2d_unit(j,do2d_no(j)) = unit
2404	IF ( data_output(i)(ilen-2:ilen) == '_xy' ) THEN
2405	data_output_xy(j) = .TRUE.
2406	ENDIF
2407	IF ( data_output(i)(ilen-2:ilen) == '_xz' ) THEN
2408	data_output_xz(j) = .TRUE.
2409	ENDIF
2410	IF ( data_output(i)(ilen-2:ilen) == '_yz' ) THEN
2411	data_output_yz(j) = .TRUE.
2412	ENDIF
2413	ENDIF
2414
2415	IF ( j == 1 ) THEN
2416	!
2417	!-- Check, if variable is already subject to averaging
2418	found = .FALSE.
2419	DO k = 1, doav_n
2420	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
2421	ENDDO
2422
2423	IF ( .NOT. found ) THEN
2424	doav_n = doav_n + 1
2425	doav(doav_n) = var
2426	ENDIF
2427	ENDIF
2428
2429	i = i + 1
2430	ENDDO
2431
2432	!
2433	!-- Store sectional planes in one shared array
2434	section(:,1) = section_xy
2435	section(:,2) = section_xz
2436	section(:,3) = section_yz
2437
2438	!
2439	!-- Upper plot limit (grid point value) for 1D profiles
2440	IF ( z_max_do1d == -1.0 ) THEN
2441	nz_do1d = nzt+1
2442	ELSE
2443	DO k = nzb+1, nzt+1
2444	nz_do1d = k
2445	IF ( zw(k) > z_max_do1d ) EXIT
2446	ENDDO
2447	ENDIF
2448
2449	!
2450	!-- Upper plot limit for 2D vertical sections
2451	IF ( z_max_do2d == -1.0 ) z_max_do2d = zu(nzt)
2452	IF ( z_max_do2d < zu(nzb+1) .OR. z_max_do2d > zu(nzt) ) THEN
2453	WRITE( message_string, * ) 'z_max_do2d = ', z_max_do2d, &
2454	' must be >= ', zu(nzb+1), '(zu(nzb+1)) and <= ', zu(nzt), &
2455	' (zu(nzt))'
2456	CALL message( 'check_parameters', 'PA0116', 1, 2, 0, 6, 0 )
2457	ENDIF
2458
2459	!
2460	!-- Upper plot limit for 3D arrays
2461	IF ( nz_do3d == -9999 ) nz_do3d = nzt + 1
2462
2463	!
2464	!-- Determine and check accuracy for compressed 3D plot output
2465	IF ( do3d_compress ) THEN
2466	!
2467	!-- Compression only permissible on T3E machines
2468	IF ( host(1:3) /= 't3e' ) THEN
2469	message_string = 'do3d_compress = .TRUE. not allowed on host "' // &
2470	TRIM( host ) // '"'
2471	CALL message( 'check_parameters', 'PA0117', 1, 2, 0, 6, 0 )
2472	ENDIF
2473
2474	i = 1
2475	DO WHILE ( do3d_comp_prec(i) /= ' ' )
2476
2477	ilen = LEN_TRIM( do3d_comp_prec(i) )
2478	IF ( LLT( do3d_comp_prec(i)(ilen:ilen), '0' ) .OR. &
2479	LGT( do3d_comp_prec(i)(ilen:ilen), '9' ) ) THEN
2480	WRITE( message_string, * ) 'illegal precision: do3d_comp_prec', &
2481	'(', i, ') = "', TRIM(do3d_comp_prec(i)),'"'
2482	CALL message( 'check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
2483	ENDIF
2484
2485	prec = IACHAR( do3d_comp_prec(i)(ilen:ilen) ) - IACHAR( '0' )
2486	var = do3d_comp_prec(i)(1:ilen-1)
2487
2488	SELECT CASE ( var )
2489
2490	CASE ( 'u' )
2491	j = 1
2492	CASE ( 'v' )
2493	j = 2
2494	CASE ( 'w' )
2495	j = 3
2496	CASE ( 'p' )
2497	j = 4
2498	CASE ( 'pt' )
2499	j = 5
2500
2501	CASE DEFAULT
2502	WRITE( message_string, * ) 'unknown variable "', &
2503	TRIM( do3d_comp_prec(i) ), '" given for do3d_comp_prec(', &
2504	i, ')'
2505	CALL message( 'check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
2506
2507	END SELECT
2508
2509	plot_3d_precision(j)%precision = prec
2510	i = i + 1
2511
2512	ENDDO
2513	ENDIF
2514
2515	!
2516	!-- Check the data output format(s)
2517	IF ( data_output_format(1) == ' ' ) THEN
2518	!
2519	!-- Default value
2520	netcdf_output = .TRUE.
2521	ELSE
2522	i = 1
2523	DO WHILE ( data_output_format(i) /= ' ' )
2524
2525	SELECT CASE ( data_output_format(i) )
2526
2527	CASE ( 'netcdf' )
2528	netcdf_output = .TRUE.
2529	CASE ( 'iso2d' )
2530	iso2d_output = .TRUE.
2531	CASE ( 'profil' )
2532	profil_output = .TRUE.
2533	CASE ( 'avs' )
2534	avs_output = .TRUE.
2535
2536	CASE DEFAULT
2537	message_string = 'unknown value for data_output_format "' // &
2538	TRIM( data_output_format(i) ) // '"'
2539	CALL message( 'check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
2540
2541	END SELECT
2542
2543	i = i + 1
2544	IF ( i > 10 ) EXIT
2545
2546	ENDDO
2547
2548	ENDIF
2549
2550	!
2551	!-- Check netcdf precison
2552	ldum = .FALSE.
2553	CALL define_netcdf_header( 'ch', ldum, 0 )
2554
2555	!
2556	!-- Check, whether a constant diffusion coefficient shall be used
2557	IF ( km_constant /= -1.0 ) THEN
2558	IF ( km_constant < 0.0 ) THEN
2559	WRITE( message_string, * ) 'km_constant = ', km_constant, ' < 0.0'
2560	CALL message( 'check_parameters', 'PA0121', 1, 2, 0, 6, 0 )
2561	ELSE
2562	IF ( prandtl_number < 0.0 ) THEN
2563	WRITE( message_string, * ) 'prandtl_number = ', prandtl_number, &
2564	' < 0.0'
2565	CALL message( 'check_parameters', 'PA0122', 1, 2, 0, 6, 0 )
2566	ENDIF
2567	constant_diffusion = .TRUE.
2568
2569	IF ( prandtl_layer ) THEN
2570	message_string = 'prandtl_layer is not allowed with fixed ' // &
2571	'value of km'
2572	CALL message( 'check_parameters', 'PA0123', 1, 2, 0, 6, 0 )
2573	ENDIF
2574	ENDIF
2575	ENDIF
2576
2577	!
2578	!-- In case of non-cyclic lateral boundaries, set the default maximum value
2579	!-- for the horizontal diffusivity used within the outflow damping layer,
2580	!-- and check/set the width of the damping layer
2581	IF ( bc_lr /= 'cyclic' ) THEN
2582	IF ( km_damp_max == -1.0 ) THEN
2583	km_damp_max = 0.5 * dx
2584	ENDIF
2585	IF ( outflow_damping_width == -1.0 ) THEN
2586	outflow_damping_width = MIN( 20, nx/2 )
2587	ENDIF
2588	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > nx ) THEN
2589	message_string = 'outflow_damping width out of range'
2590	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2591	ENDIF
2592	ENDIF
2593
2594	IF ( bc_ns /= 'cyclic' ) THEN
2595	IF ( km_damp_max == -1.0 ) THEN
2596	km_damp_max = 0.5 * dy
2597	ENDIF
2598	IF ( outflow_damping_width == -1.0 ) THEN
2599	outflow_damping_width = MIN( 20, ny/2 )
2600	ENDIF
2601	IF ( outflow_damping_width <= 0 .OR. outflow_damping_width > ny ) THEN
2602	message_string = 'outflow_damping width out of range'
2603	CALL message( 'check_parameters', 'PA0124', 1, 2, 0, 6, 0 )
2604	ENDIF
2605	ENDIF
2606
2607	!
2608	!-- Check value range for rif
2609	IF ( rif_min >= rif_max ) THEN
2610	WRITE( message_string, * ) 'rif_min = ', rif_min, ' must be less ', &
2611	'than rif_max = ', rif_max
2612	CALL message( 'check_parameters', 'PA0125', 1, 2, 0, 6, 0 )
2613	ENDIF
2614
2615	!
2616	!-- Determine upper and lower hight level indices for random perturbations
2617	IF ( disturbance_level_b == -9999999.9 ) THEN
2618	IF ( ocean ) THEN
2619	disturbance_level_b = zu((nzt*2)/3)
2620	disturbance_level_ind_b = ( nzt * 2 ) / 3
2621	ELSE
2622	disturbance_level_b = zu(nzb+3)
2623	disturbance_level_ind_b = nzb + 3
2624	ENDIF
2625	ELSEIF ( disturbance_level_b < zu(3) ) THEN
2626	WRITE( message_string, * ) 'disturbance_level_b = ', &
2627	disturbance_level_b, ' must be >= ', zu(3), '(zu(3))'
2628	CALL message( 'check_parameters', 'PA0126', 1, 2, 0, 6, 0 )
2629	ELSEIF ( disturbance_level_b > zu(nzt-2) ) THEN
2630	WRITE( message_string, * ) 'disturbance_level_b = ', &
2631	disturbance_level_b, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2632	CALL message( 'check_parameters', 'PA0127', 1, 2, 0, 6, 0 )
2633	ELSE
2634	DO k = 3, nzt-2
2635	IF ( disturbance_level_b <= zu(k) ) THEN
2636	disturbance_level_ind_b = k
2637	EXIT
2638	ENDIF
2639	ENDDO
2640	ENDIF
2641
2642	IF ( disturbance_level_t == -9999999.9 ) THEN
2643	IF ( ocean ) THEN
2644	disturbance_level_t = zu(nzt-3)
2645	disturbance_level_ind_t = nzt - 3
2646	ELSE
2647	disturbance_level_t = zu(nzt/3)
2648	disturbance_level_ind_t = nzt / 3
2649	ENDIF
2650	ELSEIF ( disturbance_level_t > zu(nzt-2) ) THEN
2651	WRITE( message_string, * ) 'disturbance_level_t = ', &
2652	disturbance_level_t, ' must be <= ', zu(nzt-2), '(zu(nzt-2))'
2653	CALL message( 'check_parameters', 'PA0128', 1, 2, 0, 6, 0 )
2654	ELSEIF ( disturbance_level_t < disturbance_level_b ) THEN
2655	WRITE( message_string, * ) 'disturbance_level_t = ', &
2656	disturbance_level_t, ' must be >= disturbance_level_b = ', &
2657	disturbance_level_b
2658	CALL message( 'check_parameters', 'PA0129', 1, 2, 0, 6, 0 )
2659	ELSE
2660	DO k = 3, nzt-2
2661	IF ( disturbance_level_t <= zu(k) ) THEN
2662	disturbance_level_ind_t = k
2663	EXIT
2664	ENDIF
2665	ENDDO
2666	ENDIF
2667
2668	!
2669	!-- Check again whether the levels determined this way are ok.
2670	!-- Error may occur at automatic determination and too few grid points in
2671	!-- z-direction.
2672	IF ( disturbance_level_ind_t < disturbance_level_ind_b ) THEN
2673	WRITE( message_string, * ) 'disturbance_level_ind_t = ', &
2674	disturbance_level_ind_t, ' must be >= disturbance_level_b = ', &
2675	disturbance_level_b
2676	CALL message( 'check_parameters', 'PA0130', 1, 2, 0, 6, 0 )
2677	ENDIF
2678
2679	!
2680	!-- Determine the horizontal index range for random perturbations.
2681	!-- In case of non-cyclic horizontal boundaries, no perturbations are imposed
2682	!-- near the inflow and the perturbation area is further limited to ...(1)
2683	!-- after the initial phase of the flow.
2684	dist_nxl = 0; dist_nxr = nx
2685	dist_nys = 0; dist_nyn = ny
2686	IF ( bc_lr /= 'cyclic' ) THEN
2687	IF ( inflow_disturbance_begin == -1 ) THEN
2688	inflow_disturbance_begin = MIN( 10, nx/2 )
2689	ENDIF
2690	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > nx )&
2691	THEN
2692	message_string = 'inflow_disturbance_begin out of range'
2693	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2694	ENDIF
2695	IF ( inflow_disturbance_end == -1 ) THEN
2696	inflow_disturbance_end = MIN( 100, 3*nx/4 )
2697	ENDIF
2698	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > nx ) &
2699	THEN
2700	message_string = 'inflow_disturbance_end out of range'
2701	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2702	ENDIF
2703	ELSEIF ( bc_ns /= 'cyclic' ) THEN
2704	IF ( inflow_disturbance_begin == -1 ) THEN
2705	inflow_disturbance_begin = MIN( 10, ny/2 )
2706	ENDIF
2707	IF ( inflow_disturbance_begin < 0 .OR. inflow_disturbance_begin > ny )&
2708	THEN
2709	message_string = 'inflow_disturbance_begin out of range'
2710	CALL message( 'check_parameters', 'PA0131', 1, 2, 0, 6, 0 )
2711	ENDIF
2712	IF ( inflow_disturbance_end == -1 ) THEN
2713	inflow_disturbance_end = MIN( 100, 3*ny/4 )
2714	ENDIF
2715	IF ( inflow_disturbance_end < 0 .OR. inflow_disturbance_end > ny ) &
2716	THEN
2717	message_string = 'inflow_disturbance_end out of range'
2718	CALL message( 'check_parameters', 'PA0132', 1, 2, 0, 6, 0 )
2719	ENDIF
2720	ENDIF
2721
2722	IF ( bc_lr == 'radiation/dirichlet' ) THEN
2723	dist_nxr = nx - inflow_disturbance_begin
2724	dist_nxl(1) = nx - inflow_disturbance_end
2725	ELSEIF ( bc_lr == 'dirichlet/radiation' ) THEN
2726	dist_nxl = inflow_disturbance_begin
2727	dist_nxr(1) = inflow_disturbance_end
2728	ENDIF
2729	IF ( bc_ns == 'dirichlet/radiation' ) THEN
2730	dist_nyn = ny - inflow_disturbance_begin
2731	dist_nys(1) = ny - inflow_disturbance_end
2732	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
2733	dist_nys = inflow_disturbance_begin
2734	dist_nyn(1) = inflow_disturbance_end
2735	ENDIF
2736
2737	!
2738	!-- A turbulent inflow requires Dirichlet conditions at the respective inflow
2739	!-- boundary (so far, a turbulent inflow is realized from the left side only)
2740	IF ( turbulent_inflow .AND. bc_lr /= 'dirichlet/radiation' ) THEN
2741	message_string = 'turbulent_inflow = .T. requires a Dirichlet ' // &
2742	'condition at the inflow boundary'
2743	CALL message( 'check_parameters', 'PA0133', 1, 2, 0, 6, 0 )
2744	ENDIF
2745
2746	!
2747	!-- In case of turbulent inflow calculate the index of the recycling plane
2748	IF ( turbulent_inflow ) THEN
2749	IF ( recycling_width == 9999999.9 ) THEN
2750	!
2751	!-- Set the default value for the width of the recycling domain
2752	recycling_width = 0.1 * nx * dx
2753	ELSE
2754	IF ( recycling_width < dx .OR. recycling_width > nx * dx ) THEN
2755	WRITE( message_string, * ) 'illegal value for recycling_width:', &
2756	' ', recycling_width
2757	CALL message( 'check_parameters', 'PA0134', 1, 2, 0, 6, 0 )
2758	ENDIF
2759	ENDIF
2760	!
2761	!-- Calculate the index
2762	recycling_plane = recycling_width / dx
2763	ENDIF
2764
2765	!
2766	!-- Check random generator
2767	IF ( random_generator /= 'system-specific' .AND. &
2768	random_generator /= 'numerical-recipes' ) THEN
2769	message_string = 'unknown random generator: random_generator = "' // &
2770	TRIM( random_generator ) // '"'
2771	CALL message( 'check_parameters', 'PA0135', 1, 2, 0, 6, 0 )
2772	ENDIF
2773
2774	!
2775	!-- Determine damping level index for 1D model
2776	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
2777	IF ( damp_level_1d == -1.0 ) THEN
2778	damp_level_1d = zu(nzt+1)
2779	damp_level_ind_1d = nzt + 1
2780	ELSEIF ( damp_level_1d < 0.0 .OR. damp_level_1d > zu(nzt+1) ) THEN
2781	WRITE( message_string, * ) 'damp_level_1d = ', damp_level_1d, &
2782	' must be > 0.0 and < ', zu(nzt+1), '(zu(nzt+1))'
2783	CALL message( 'check_parameters', 'PA0136', 1, 2, 0, 6, 0 )
2784	ELSE
2785	DO k = 1, nzt+1
2786	IF ( damp_level_1d <= zu(k) ) THEN
2787	damp_level_ind_1d = k
2788	EXIT
2789	ENDIF
2790	ENDDO
2791	ENDIF
2792	ENDIF
2793
2794	!
2795	!-- Check some other 1d-model parameters
2796	IF ( TRIM( mixing_length_1d ) /= 'as_in_3d_model' .AND. &
2797	TRIM( mixing_length_1d ) /= 'blackadar' ) THEN
2798	message_string = 'mixing_length_1d = "' // TRIM( mixing_length_1d ) // &
2799	'" is unknown'
2800	CALL message( 'check_parameters', 'PA0137', 1, 2, 0, 6, 0 )
2801	ENDIF
2802	IF ( TRIM( dissipation_1d ) /= 'as_in_3d_model' .AND. &
2803	TRIM( dissipation_1d ) /= 'detering' ) THEN
2804	message_string = 'dissipation_1d = "' // TRIM( dissipation_1d ) // &
2805	'" is unknown'
2806	CALL message( 'check_parameters', 'PA0138', 1, 2, 0, 6, 0 )
2807	ENDIF
2808
2809	!
2810	!-- Set time for the next user defined restart (time_restart is the
2811	!-- internal parameter for steering restart events)
2812	IF ( restart_time /= 9999999.9 ) THEN
2813	IF ( restart_time > simulated_time ) time_restart = restart_time
2814	ELSE
2815	!
2816	!-- In case of a restart run, set internal parameter to default (no restart)
2817	!-- if the NAMELIST-parameter restart_time is omitted
2818	time_restart = 9999999.9
2819	ENDIF
2820
2821	!
2822	!-- Set default value of the time needed to terminate a model run
2823	IF ( termination_time_needed == -1.0 ) THEN
2824	IF ( host(1:3) == 'ibm' ) THEN
2825	termination_time_needed = 300.0
2826	ELSE
2827	termination_time_needed = 35.0
2828	ENDIF
2829	ENDIF
2830
2831	!
2832	!-- Check the time needed to terminate a model run
2833	IF ( host(1:3) == 't3e' ) THEN
2834	!
2835	!-- Time needed must be at least 30 seconds on all CRAY machines, because
2836	!-- MPP_TREMAIN gives the remaining CPU time only in steps of 30 seconds
2837	IF ( termination_time_needed <= 30.0 ) THEN
2838	WRITE( message_string, * ) 'termination_time_needed = ', &
2839	termination_time_needed, ' must be > 30.0 on host "', &
2840	TRIM( host ), '"'
2841	CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 )
2842	ENDIF
2843	ELSEIF ( host(1:3) == 'ibm' ) THEN
2844	!
2845	!-- On IBM-regatta machines the time should be at least 300 seconds,
2846	!-- because the job time consumed before executing palm (for compiling,
2847	!-- copying of files, etc.) has to be regarded
2848	IF ( termination_time_needed < 300.0 ) THEN
2849	WRITE( message_string, * ) 'termination_time_needed = ', &
2850	termination_time_needed, ' should be >= 300.0 on host "', &
2851	TRIM( host ), '"'
2852	CALL message( 'check_parameters', 'PA0140', 1, 2, 0, 6, 0 )
2853	ENDIF
2854	ENDIF
2855
2856	!
2857	!-- Check pressure gradient conditions
2858	IF ( dp_external .AND. conserve_volume_flow ) THEN
2859	WRITE( message_string, * ) 'Both dp_external and conserve_volume_flow', &
2860	' are .TRUE. but one of them must be .FALSE.'
2861	CALL message( 'check_parameters', 'PA0150', 1, 2, 0, 6, 0 )
2862	ENDIF
2863	IF ( dp_external ) THEN
2864	IF ( dp_level_b < zu(nzb) .OR. dp_level_b > zu(nzt) ) THEN
2865	WRITE( message_string, * ) 'dp_level_b = ', dp_level_b, ' is out ', &
2866	' of range'
2867	CALL message( 'check_parameters', 'PA0151', 1, 2, 0, 6, 0 )
2868	ENDIF
2869	IF ( .NOT. ANY( dpdxy /= 0.0 ) ) THEN
2870	WRITE( message_string, * ) 'dp_external is .TRUE. but dpdxy is zero',&
2871	', i.e. the external pressure gradient & will not be applied'
2872	CALL message( 'check_parameters', 'PA0152', 0, 1, 0, 6, 0 )
2873	ENDIF
2874	ENDIF
2875	IF ( ANY( dpdxy /= 0.0 ) .AND. .NOT. dp_external ) THEN
2876	WRITE( message_string, * ) 'dpdxy is nonzero but dp_external is ', &
2877	'.FALSE., i.e. the external pressure gradient & will not be applied'
2878	CALL message( 'check_parameters', 'PA0153', 0, 1, 0, 6, 0 )
2879	ENDIF
2880	IF ( conserve_volume_flow ) THEN
2881	IF ( TRIM( conserve_volume_flow_mode ) == 'default' ) THEN
2882	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
2883	conserve_volume_flow_mode = 'inflow_profile'
2884	ELSE
2885	conserve_volume_flow_mode = 'initial_profiles'
2886	ENDIF
2887	ELSEIF ( TRIM( conserve_volume_flow_mode ) /= 'initial_profiles' .AND. &
2888	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' .AND. &
2889	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) THEN
2890	WRITE( message_string, * ) 'unknown conserve_volume_flow_mode: ', &
2891	conserve_volume_flow_mode
2892	CALL message( 'check_parameters', 'PA0154', 1, 2, 0, 6, 0 )
2893	ENDIF
2894	IF ( ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) .AND. &
2895	TRIM( conserve_volume_flow_mode ) /= 'inflow_profile' ) THEN
2896	WRITE( message_string, * ) 'noncyclic boundary conditions ', &
2897	'require & conserve_volume_flow_mode = ''inflow_profile'''
2898	CALL message( 'check_parameters', 'PA0155', 1, 2, 0, 6, 0 )
2899	ENDIF
2900	IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' .AND. &
2901	TRIM( conserve_volume_flow_mode ) == 'inflow_profile' ) THEN
2902	WRITE( message_string, * ) 'cyclic boundary conditions ', &
2903	'require & conserve_volume_flow_mode = ''initial_profiles''', &
2904	' or ''bulk_velocity'''
2905	CALL message( 'check_parameters', 'PA0156', 1, 2, 0, 6, 0 )
2906	ENDIF
2907	ENDIF
2908	IF ( ( u_bulk /= 0.0 .OR. v_bulk /= 0.0 ) .AND. &
2909	( .NOT. conserve_volume_flow .OR. &
2910	TRIM( conserve_volume_flow_mode ) /= 'bulk_velocity' ) ) THEN
2911	WRITE( message_string, * ) 'nonzero bulk velocity requires ', &
2912	'conserve_volume_flow = .T. and & ', &
2913	'conserve_volume_flow_mode = ''bulk_velocity'''
2914	CALL message( 'check_parameters', 'PA0157', 1, 2, 0, 6, 0 )
2915	ENDIF
2916
2917	!
2918	!-- Check &userpar parameters
2919	CALL user_check_parameters
2920
2921
2922	END SUBROUTINE check_parameters

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |